drivers/nvmem/sc27xx-efuse.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 // Copyright (C) 2018 Spreadtrum Communications Inc.
   3
   4 #include <linux/hwspinlock.h>
   5 #include <linux/module.h>
   6 #include <linux/of.h>
   7 #include <linux/platform_device.h>
   8 #include <linux/regmap.h>
   9 #include <linux/nvmem-provider.h>
  10
  11 /* PMIC global registers definition */
  12 #define SC27XX_MODULE_EN                0xc08
  13 #define SC27XX_EFUSE_EN                 BIT(6)
  14
  15 /* Efuse controller registers definition */
  16 #define SC27XX_EFUSE_GLB_CTRL           0x0
  17 #define SC27XX_EFUSE_DATA_RD            0x4
  18 #define SC27XX_EFUSE_DATA_WR            0x8
  19 #define SC27XX_EFUSE_BLOCK_INDEX        0xc
  20 #define SC27XX_EFUSE_MODE_CTRL          0x10
  21 #define SC27XX_EFUSE_STATUS             0x14
  22 #define SC27XX_EFUSE_WR_TIMING_CTRL     0x20
  23 #define SC27XX_EFUSE_RD_TIMING_CTRL     0x24
  24 #define SC27XX_EFUSE_EFUSE_DEB_CTRL     0x28
  25
  26 /* Mask definition for SC27XX_EFUSE_BLOCK_INDEX register */
  27 #define SC27XX_EFUSE_BLOCK_MASK         GENMASK(4, 0)
  28
  29 /* Bits definitions for SC27XX_EFUSE_MODE_CTRL register */
  30 #define SC27XX_EFUSE_PG_START           BIT(0)
  31 #define SC27XX_EFUSE_RD_START           BIT(1)
  32 #define SC27XX_EFUSE_CLR_RDDONE         BIT(2)
  33
  34 /* Bits definitions for SC27XX_EFUSE_STATUS register */
  35 #define SC27XX_EFUSE_PGM_BUSY           BIT(0)
  36 #define SC27XX_EFUSE_READ_BUSY          BIT(1)
  37 #define SC27XX_EFUSE_STANDBY            BIT(2)
  38 #define SC27XX_EFUSE_GLOBAL_PROT        BIT(3)
  39 #define SC27XX_EFUSE_RD_DONE            BIT(4)
  40
  41 /* Block number and block width (bytes) definitions */
  42 #define SC27XX_EFUSE_BLOCK_MAX          32
  43 #define SC27XX_EFUSE_BLOCK_WIDTH        2
  44
  45 /* Timeout (ms) for the trylock of hardware spinlocks */
  46 #define SC27XX_EFUSE_HWLOCK_TIMEOUT     5000
  47
  48 /* Timeout (us) of polling the status */
  49 #define SC27XX_EFUSE_POLL_TIMEOUT       3000000
  50 #define SC27XX_EFUSE_POLL_DELAY_US      10000
  51
  52 struct sc27xx_efuse {
  53         struct device *dev;
  54         struct regmap *regmap;
  55         struct hwspinlock *hwlock;
  56         struct mutex mutex;
  57         u32 base;
  58 };
  59
  60 /*
  61  * On Spreadtrum platform, we have multi-subsystems will access the unique
  62  * efuse controller, so we need one hardware spinlock to synchronize between
  63  * the multiple subsystems.
  64  */
  65 static int sc27xx_efuse_lock(struct sc27xx_efuse *efuse)
  66 {
  67         int ret;
  68
  69         mutex_lock(&efuse->mutex);
  70
  71         ret = hwspin_lock_timeout_raw(efuse->hwlock,
  72                                       SC27XX_EFUSE_HWLOCK_TIMEOUT);
  73         if (ret) {
  74                 dev_err(efuse->dev, "timeout to get the hwspinlock\n");
  75                 mutex_unlock(&efuse->mutex);
  76                 return ret;
  77         }
  78
  79         return 0;
  80 }
  81
  82 static void sc27xx_efuse_unlock(struct sc27xx_efuse *efuse)
  83 {
  84         hwspin_unlock_raw(efuse->hwlock);
  85         mutex_unlock(&efuse->mutex);
  86 }
  87
  88 static int sc27xx_efuse_poll_status(struct sc27xx_efuse *efuse, u32 bits)
  89 {
  90         int ret;
  91         u32 val;
  92
  93         ret = regmap_read_poll_timeout(efuse->regmap,
  94                                        efuse->base + SC27XX_EFUSE_STATUS,
  95                                        val, (val & bits),
  96                                        SC27XX_EFUSE_POLL_DELAY_US,
  97                                        SC27XX_EFUSE_POLL_TIMEOUT);
  98         if (ret) {
  99                 dev_err(efuse->dev, "timeout to update the efuse status\n");
 100                 return ret;
 101         }
 102
 103         return 0;
 104 }
 105
 106 static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
 107 {
 108         struct sc27xx_efuse *efuse = context;
 109         u32 buf, blk_index = offset / SC27XX_EFUSE_BLOCK_WIDTH;
 110         u32 blk_offset = (offset % SC27XX_EFUSE_BLOCK_WIDTH) * BITS_PER_BYTE;
 111         int ret;
 112
 113         if (blk_index > SC27XX_EFUSE_BLOCK_MAX ||
 114             bytes > SC27XX_EFUSE_BLOCK_WIDTH)
 115                 return -EINVAL;
 116
 117         ret = sc27xx_efuse_lock(efuse);
 118         if (ret)
 119                 return ret;
 120
 121         /* Enable the efuse controller. */
 122         ret = regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN,
 123                                  SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
 124         if (ret)
 125                 goto unlock_efuse;
 126
 127         /*
 128          * Before reading, we should ensure the efuse controller is in
 129          * standby state.
 130          */
 131         ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_STANDBY);
 132         if (ret)
 133                 goto disable_efuse;
 134
 135         /* Set the block address to be read. */
 136         ret = regmap_write(efuse->regmap,
 137                            efuse->base + SC27XX_EFUSE_BLOCK_INDEX,
 138                            blk_index & SC27XX_EFUSE_BLOCK_MASK);
 139         if (ret)
 140                 goto disable_efuse;
 141
 142         /* Start reading process from efuse memory. */
 143         ret = regmap_update_bits(efuse->regmap,
 144                                  efuse->base + SC27XX_EFUSE_MODE_CTRL,
 145                                  SC27XX_EFUSE_RD_START,
 146                                  SC27XX_EFUSE_RD_START);
 147         if (ret)
 148                 goto disable_efuse;
 149
 150         /*
 151          * Polling the read done status to make sure the reading process
 152          * is completed, that means the data can be read out now.
 153          */
 154         ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_RD_DONE);
 155         if (ret)
 156                 goto disable_efuse;
 157
 158         /* Read data from efuse memory. */
 159         ret = regmap_read(efuse->regmap, efuse->base + SC27XX_EFUSE_DATA_RD,
 160                           &buf);
 161         if (ret)
 162                 goto disable_efuse;
 163
 164         /* Clear the read done flag. */
 165         ret = regmap_update_bits(efuse->regmap,
 166                                  efuse->base + SC27XX_EFUSE_MODE_CTRL,
 167                                  SC27XX_EFUSE_CLR_RDDONE,
 168                                  SC27XX_EFUSE_CLR_RDDONE);
 169
 170 disable_efuse:
 171         /* Disable the efuse controller after reading. */
 172         regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN, SC27XX_EFUSE_EN, 0);
 173 unlock_efuse:
 174         sc27xx_efuse_unlock(efuse);
 175
 176         if (!ret) {
 177                 buf >>= blk_offset;
 178                 memcpy(val, &buf, bytes);
 179         }
 180
 181         return ret;
 182 }
 183
 184 static int sc27xx_efuse_probe(struct platform_device *pdev)
 185 {
 186         struct device_node *np = pdev->dev.of_node;
 187         struct nvmem_config econfig = { };
 188         struct nvmem_device *nvmem;
 189         struct sc27xx_efuse *efuse;
 190         int ret;
 191
 192         efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
 193         if (!efuse)
 194                 return -ENOMEM;
 195
 196         efuse->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 197         if (!efuse->regmap) {
 198                 dev_err(&pdev->dev, "failed to get efuse regmap\n");
 199                 return -ENODEV;
 200         }
 201
 202         ret = of_property_read_u32(np, "reg", &efuse->base);
 203         if (ret) {
 204                 dev_err(&pdev->dev, "failed to get efuse base address\n");
 205                 return ret;
 206         }
 207
 208         ret = of_hwspin_lock_get_id(np, 0);
 209         if (ret < 0) {
 210                 dev_err(&pdev->dev, "failed to get hwspinlock id\n");
 211                 return ret;
 212         }
 213
 214         efuse->hwlock = devm_hwspin_lock_request_specific(&pdev->dev, ret);
 215         if (!efuse->hwlock) {
 216                 dev_err(&pdev->dev, "failed to request hwspinlock\n");
 217                 return -ENXIO;
 218         }
 219
 220         mutex_init(&efuse->mutex);
 221         efuse->dev = &pdev->dev;
 222
 223         econfig.stride = 1;
 224         econfig.word_size = 1;
 225         econfig.read_only = true;
 226         econfig.name = "sc27xx-efuse";
 227         econfig.size = SC27XX_EFUSE_BLOCK_MAX * SC27XX_EFUSE_BLOCK_WIDTH;
 228         econfig.reg_read = sc27xx_efuse_read;
 229         econfig.priv = efuse;
 230         econfig.dev = &pdev->dev;
 231         nvmem = devm_nvmem_register(&pdev->dev, &econfig);
 232         if (IS_ERR(nvmem)) {
 233                 dev_err(&pdev->dev, "failed to register nvmem config\n");
 234                 return PTR_ERR(nvmem);
 235         }
 236
 237         return 0;
 238 }
 239
 240 static const struct of_device_id sc27xx_efuse_of_match[] = {
 241         { .compatible = "sprd,sc2731-efuse" },
 242         { }
 243 };
 244
 245 static struct platform_driver sc27xx_efuse_driver = {
 246         .probe = sc27xx_efuse_probe,
 247         .driver = {
 248                 .name = "sc27xx-efuse",
 249                 .of_match_table = sc27xx_efuse_of_match,
 250         },
 251 };
 252
 253 module_platform_driver(sc27xx_efuse_driver);
 254
 255 MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
 256 MODULE_DESCRIPTION("Spreadtrum SC27xx efuse driver");
 257 MODULE_LICENSE("GPL v2");