kpacket_gen: use constants for cmdlength
[cor.git] / drivers / clk / clk-max9485.c
blob5e80f3d090f34f1602b7bf7a97d7b5ed28b2fffe
1 // SPDX-License-Identifier: GPL-2.0
3 #include <linux/module.h>
4 #include <linux/kernel.h>
5 #include <linux/clk.h>
6 #include <linux/clk-provider.h>
7 #include <linux/err.h>
8 #include <linux/errno.h>
9 #include <linux/gpio/consumer.h>
10 #include <linux/i2c.h>
11 #include <linux/regulator/consumer.h>
13 #include <dt-bindings/clock/maxim,max9485.h>
15 #define MAX9485_NUM_CLKS 4
17 /* This chip has only one register of 8 bit width. */
19 #define MAX9485_FS_12KHZ (0 << 0)
20 #define MAX9485_FS_32KHZ (1 << 0)
21 #define MAX9485_FS_44_1KHZ (2 << 0)
22 #define MAX9485_FS_48KHZ (3 << 0)
24 #define MAX9485_SCALE_256 (0 << 2)
25 #define MAX9485_SCALE_384 (1 << 2)
26 #define MAX9485_SCALE_768 (2 << 2)
28 #define MAX9485_DOUBLE BIT(4)
29 #define MAX9485_CLKOUT1_ENABLE BIT(5)
30 #define MAX9485_CLKOUT2_ENABLE BIT(6)
31 #define MAX9485_MCLK_ENABLE BIT(7)
32 #define MAX9485_FREQ_MASK 0x1f
34 struct max9485_rate {
35 unsigned long out;
36 u8 reg_value;
40 * Ordered by frequency. For frequency the hardware can generate with
41 * multiple settings, the one with lowest jitter is listed first.
43 static const struct max9485_rate max9485_rates[] = {
44 { 3072000, MAX9485_FS_12KHZ | MAX9485_SCALE_256 },
45 { 4608000, MAX9485_FS_12KHZ | MAX9485_SCALE_384 },
46 { 8192000, MAX9485_FS_32KHZ | MAX9485_SCALE_256 },
47 { 9126000, MAX9485_FS_12KHZ | MAX9485_SCALE_768 },
48 { 11289600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 },
49 { 12288000, MAX9485_FS_48KHZ | MAX9485_SCALE_256 },
50 { 12288000, MAX9485_FS_32KHZ | MAX9485_SCALE_384 },
51 { 16384000, MAX9485_FS_32KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE },
52 { 16934400, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 },
53 { 18384000, MAX9485_FS_48KHZ | MAX9485_SCALE_384 },
54 { 22579200, MAX9485_FS_44_1KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE },
55 { 24576000, MAX9485_FS_48KHZ | MAX9485_SCALE_256 | MAX9485_DOUBLE },
56 { 24576000, MAX9485_FS_32KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE },
57 { 24576000, MAX9485_FS_32KHZ | MAX9485_SCALE_768 },
58 { 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE },
59 { 33868800, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 },
60 { 36864000, MAX9485_FS_48KHZ | MAX9485_SCALE_384 | MAX9485_DOUBLE },
61 { 36864000, MAX9485_FS_48KHZ | MAX9485_SCALE_768 },
62 { 49152000, MAX9485_FS_32KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE },
63 { 67737600, MAX9485_FS_44_1KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE },
64 { 73728000, MAX9485_FS_48KHZ | MAX9485_SCALE_768 | MAX9485_DOUBLE },
65 { } /* sentinel */
68 struct max9485_driver_data;
70 struct max9485_clk_hw {
71 struct clk_hw hw;
72 struct clk_init_data init;
73 u8 enable_bit;
74 struct max9485_driver_data *drvdata;
77 struct max9485_driver_data {
78 struct clk *xclk;
79 struct i2c_client *client;
80 u8 reg_value;
81 struct regulator *supply;
82 struct gpio_desc *reset_gpio;
83 struct max9485_clk_hw hw[MAX9485_NUM_CLKS];
86 static inline struct max9485_clk_hw *to_max9485_clk(struct clk_hw *hw)
88 return container_of(hw, struct max9485_clk_hw, hw);
91 static int max9485_update_bits(struct max9485_driver_data *drvdata,
92 u8 mask, u8 value)
94 int ret;
96 drvdata->reg_value &= ~mask;
97 drvdata->reg_value |= value;
99 dev_dbg(&drvdata->client->dev,
100 "updating mask 0x%02x value 0x%02x -> 0x%02x\n",
101 mask, value, drvdata->reg_value);
103 ret = i2c_master_send(drvdata->client,
104 &drvdata->reg_value,
105 sizeof(drvdata->reg_value));
107 return ret < 0 ? ret : 0;
110 static int max9485_clk_prepare(struct clk_hw *hw)
112 struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
114 return max9485_update_bits(clk_hw->drvdata,
115 clk_hw->enable_bit,
116 clk_hw->enable_bit);
119 static void max9485_clk_unprepare(struct clk_hw *hw)
121 struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
123 max9485_update_bits(clk_hw->drvdata, clk_hw->enable_bit, 0);
127 * CLKOUT - configurable clock output
129 static int max9485_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
130 unsigned long parent_rate)
132 struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
133 const struct max9485_rate *entry;
135 for (entry = max9485_rates; entry->out != 0; entry++)
136 if (entry->out == rate)
137 break;
139 if (entry->out == 0)
140 return -EINVAL;
142 return max9485_update_bits(clk_hw->drvdata,
143 MAX9485_FREQ_MASK,
144 entry->reg_value);
147 static unsigned long max9485_clkout_recalc_rate(struct clk_hw *hw,
148 unsigned long parent_rate)
150 struct max9485_clk_hw *clk_hw = to_max9485_clk(hw);
151 struct max9485_driver_data *drvdata = clk_hw->drvdata;
152 u8 val = drvdata->reg_value & MAX9485_FREQ_MASK;
153 const struct max9485_rate *entry;
155 for (entry = max9485_rates; entry->out != 0; entry++)
156 if (val == entry->reg_value)
157 return entry->out;
159 return 0;
162 static long max9485_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
163 unsigned long *parent_rate)
165 const struct max9485_rate *curr, *prev = NULL;
167 for (curr = max9485_rates; curr->out != 0; curr++) {
168 /* Exact matches */
169 if (curr->out == rate)
170 return rate;
173 * Find the first entry that has a frequency higher than the
174 * requested one.
176 if (curr->out > rate) {
177 unsigned int mid;
180 * If this is the first entry, clamp the value to the
181 * lowest possible frequency.
183 if (!prev)
184 return curr->out;
187 * Otherwise, determine whether the previous entry or
188 * current one is closer.
190 mid = prev->out + ((curr->out - prev->out) / 2);
192 return (mid > rate) ? prev->out : curr->out;
195 prev = curr;
198 /* If the last entry was still too high, clamp the value */
199 return prev->out;
202 struct max9485_clk {
203 const char *name;
204 int parent_index;
205 const struct clk_ops ops;
206 u8 enable_bit;
209 static const struct max9485_clk max9485_clks[MAX9485_NUM_CLKS] = {
210 [MAX9485_MCLKOUT] = {
211 .name = "mclkout",
212 .parent_index = -1,
213 .enable_bit = MAX9485_MCLK_ENABLE,
214 .ops = {
215 .prepare = max9485_clk_prepare,
216 .unprepare = max9485_clk_unprepare,
219 [MAX9485_CLKOUT] = {
220 .name = "clkout",
221 .parent_index = -1,
222 .ops = {
223 .set_rate = max9485_clkout_set_rate,
224 .round_rate = max9485_clkout_round_rate,
225 .recalc_rate = max9485_clkout_recalc_rate,
228 [MAX9485_CLKOUT1] = {
229 .name = "clkout1",
230 .parent_index = MAX9485_CLKOUT,
231 .enable_bit = MAX9485_CLKOUT1_ENABLE,
232 .ops = {
233 .prepare = max9485_clk_prepare,
234 .unprepare = max9485_clk_unprepare,
237 [MAX9485_CLKOUT2] = {
238 .name = "clkout2",
239 .parent_index = MAX9485_CLKOUT,
240 .enable_bit = MAX9485_CLKOUT2_ENABLE,
241 .ops = {
242 .prepare = max9485_clk_prepare,
243 .unprepare = max9485_clk_unprepare,
248 static struct clk_hw *
249 max9485_of_clk_get(struct of_phandle_args *clkspec, void *data)
251 struct max9485_driver_data *drvdata = data;
252 unsigned int idx = clkspec->args[0];
254 return &drvdata->hw[idx].hw;
257 static int max9485_i2c_probe(struct i2c_client *client,
258 const struct i2c_device_id *id)
260 struct max9485_driver_data *drvdata;
261 struct device *dev = &client->dev;
262 const char *xclk_name;
263 int i, ret;
265 drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
266 if (!drvdata)
267 return -ENOMEM;
269 drvdata->xclk = devm_clk_get(dev, "xclk");
270 if (IS_ERR(drvdata->xclk))
271 return PTR_ERR(drvdata->xclk);
273 xclk_name = __clk_get_name(drvdata->xclk);
275 drvdata->supply = devm_regulator_get(dev, "vdd");
276 if (IS_ERR(drvdata->supply))
277 return PTR_ERR(drvdata->supply);
279 ret = regulator_enable(drvdata->supply);
280 if (ret < 0)
281 return ret;
283 drvdata->reset_gpio =
284 devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
285 if (IS_ERR(drvdata->reset_gpio))
286 return PTR_ERR(drvdata->reset_gpio);
288 i2c_set_clientdata(client, drvdata);
289 drvdata->client = client;
291 ret = i2c_master_recv(drvdata->client, &drvdata->reg_value,
292 sizeof(drvdata->reg_value));
293 if (ret < 0) {
294 dev_warn(dev, "Unable to read device register: %d\n", ret);
295 return ret;
298 for (i = 0; i < MAX9485_NUM_CLKS; i++) {
299 int parent_index = max9485_clks[i].parent_index;
300 const char *name;
302 if (of_property_read_string_index(dev->of_node,
303 "clock-output-names",
304 i, &name) == 0) {
305 drvdata->hw[i].init.name = name;
306 } else {
307 drvdata->hw[i].init.name = max9485_clks[i].name;
310 drvdata->hw[i].init.ops = &max9485_clks[i].ops;
311 drvdata->hw[i].init.num_parents = 1;
312 drvdata->hw[i].init.flags = 0;
314 if (parent_index > 0) {
315 drvdata->hw[i].init.parent_names =
316 &drvdata->hw[parent_index].init.name;
317 drvdata->hw[i].init.flags |= CLK_SET_RATE_PARENT;
318 } else {
319 drvdata->hw[i].init.parent_names = &xclk_name;
322 drvdata->hw[i].enable_bit = max9485_clks[i].enable_bit;
323 drvdata->hw[i].hw.init = &drvdata->hw[i].init;
324 drvdata->hw[i].drvdata = drvdata;
326 ret = devm_clk_hw_register(dev, &drvdata->hw[i].hw);
327 if (ret < 0)
328 return ret;
331 return devm_of_clk_add_hw_provider(dev, max9485_of_clk_get, drvdata);
334 static int __maybe_unused max9485_suspend(struct device *dev)
336 struct i2c_client *client = to_i2c_client(dev);
337 struct max9485_driver_data *drvdata = i2c_get_clientdata(client);
339 gpiod_set_value_cansleep(drvdata->reset_gpio, 0);
341 return 0;
344 static int __maybe_unused max9485_resume(struct device *dev)
346 struct i2c_client *client = to_i2c_client(dev);
347 struct max9485_driver_data *drvdata = i2c_get_clientdata(client);
348 int ret;
350 gpiod_set_value_cansleep(drvdata->reset_gpio, 1);
352 ret = i2c_master_send(client, &drvdata->reg_value,
353 sizeof(drvdata->reg_value));
355 return ret < 0 ? ret : 0;
358 static const struct dev_pm_ops max9485_pm_ops = {
359 SET_SYSTEM_SLEEP_PM_OPS(max9485_suspend, max9485_resume)
362 static const struct of_device_id max9485_dt_ids[] = {
363 { .compatible = "maxim,max9485", },
366 MODULE_DEVICE_TABLE(of, max9485_dt_ids);
368 static const struct i2c_device_id max9485_i2c_ids[] = {
369 { .name = "max9485", },
372 MODULE_DEVICE_TABLE(i2c, max9485_i2c_ids);
374 static struct i2c_driver max9485_driver = {
375 .driver = {
376 .name = "max9485",
377 .pm = &max9485_pm_ops,
378 .of_match_table = max9485_dt_ids,
380 .probe = max9485_i2c_probe,
381 .id_table = max9485_i2c_ids,
383 module_i2c_driver(max9485_driver);
385 MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>");
386 MODULE_DESCRIPTION("MAX9485 Programmable Audio Clock Generator");
387 MODULE_LICENSE("GPL v2");