autoconf/install-sh

   1 #!/bin/sh
   2 # install - install a program, script, or datafile
   3
   4 scriptversion=2005-05-14.22
   5
   6 # This originates from X11R5 (mit/util/scripts/install.sh), which was
   7 # later released in X11R6 (xc/config/util/install.sh) with the
   8 # following copyright and license.
   9 #
  10 # Copyright (C) 1994 X Consortium
  11 #
  12 # Permission is hereby granted, free of charge, to any person obtaining a copy
  13 # of this software and associated documentation files (the "Software"), to
  14 # deal in the Software without restriction, including without limitation the
  15 # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
  16 # sell copies of the Software, and to permit persons to whom the Software is
  17 # furnished to do so, subject to the following conditions:
  18 #
  19 # The above copyright notice and this permission notice shall be included in
  20 # all copies or substantial portions of the Software.
  21 #
  22 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  23 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  24 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
  25 # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
  26 # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
  27 # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  28 #
  29 # Except as contained in this notice, the name of the X Consortium shall not
  30 # be used in advertising or otherwise to promote the sale, use or other deal-
  31 # ings in this Software without prior written authorization from the X Consor-
  32 # tium.
  33 #
  34 #
  35 # FSF changes to this file are in the public domain.
  36 #
  37 # Calling this script install-sh is preferred over install.sh, to prevent
  38 # `make' implicit rules from creating a file called install from it
  39 # when there is no Makefile.
  40 #
  41 # This script is compatible with the BSD install script, but was written
  42 # from scratch.  It can only install one file at a time, a restriction
  43 # shared with many OS's install programs.
  44
  45 # set DOITPROG to echo to test this script
  46
  47 # Don't use :- since 4.3BSD and earlier shells don't like it.
  48 doit="${DOITPROG-}"
  49
  50 # put in absolute paths if you don't have them in your path; or use env. vars.
  51
  52 mvprog="${MVPROG-mv}"
  53 cpprog="${CPPROG-cp}"
  54 chmodprog="${CHMODPROG-chmod}"
  55 chownprog="${CHOWNPROG-chown}"
  56 chgrpprog="${CHGRPPROG-chgrp}"
  57 stripprog="${STRIPPROG-strip}"
  58 rmprog="${RMPROG-rm}"
  59 mkdirprog="${MKDIRPROG-mkdir}"
  60
  61 chmodcmd="$chmodprog 0755"
  62 chowncmd=
  63 chgrpcmd=
  64 stripcmd=
  65 rmcmd="$rmprog -f"
  66 mvcmd="$mvprog"
  67 src=
  68 dst=
  69 dir_arg=
  70 dstarg=
  71 no_target_directory=
  72
  73 usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
  74    or: $0 [OPTION]... SRCFILES... DIRECTORY
  75    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
  76    or: $0 [OPTION]... -d DIRECTORIES...
  77
  78 In the 1st form, copy SRCFILE to DSTFILE.
  79 In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
  80 In the 4th, create DIRECTORIES.
  81
  82 Options:
  83 -c         (ignored)
  84 -d         create directories instead of installing files.
  85 -g GROUP   $chgrpprog installed files to GROUP.
  86 -m MODE    $chmodprog installed files to MODE.
  87 -o USER    $chownprog installed files to USER.
  88 -s         $stripprog installed files.
  89 -t DIRECTORY  install into DIRECTORY.
  90 -T         report an error if DSTFILE is a directory.
  91 --help     display this help and exit.
  92 --version  display version info and exit.
  93
  94 Environment variables override the default commands:
  95   CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
  96 "
  97
  98 while test -n "$1"; do
  99   case $1 in
 100     -c) shift
 101         continue;;
 102
 103     -d) dir_arg=true
 104         shift
 105         continue;;
 106
 107     -g) chgrpcmd="$chgrpprog $2"
 108         shift
 109         shift
 110         continue;;
 111
 112     --help) echo "$usage"; exit $?;;
 113
 114     -m) chmodcmd="$chmodprog $2"
 115         shift
 116         shift
 117         continue;;
 118
 119     -o) chowncmd="$chownprog $2"
 120         shift
 121         shift
 122         continue;;
 123
 124     -s) stripcmd=$stripprog
 125         shift
 126         continue;;
 127
 128     -t) dstarg=$2
 129         shift
 130         shift
 131         continue;;
 132
 133     -T) no_target_directory=true
 134         shift
 135         continue;;
 136
 137     --version) echo "$0 $scriptversion"; exit $?;;
 138
 139     *)  # When -d is used, all remaining arguments are directories to create.
 140         # When -t is used, the destination is already specified.
 141         test -n "$dir_arg$dstarg" && break
 142         # Otherwise, the last argument is the destination.  Remove it from $@.
 143         for arg
 144         do
 145           if test -n "$dstarg"; then
 146             # $@ is not empty: it contains at least $arg.
 147             set fnord "$@" "$dstarg"
 148             shift # fnord
 149           fi
 150           shift # arg
 151           dstarg=$arg
 152         done
 153         break;;
 154   esac
 155 done
 156
 157 if test -z "$1"; then
 158   if test -z "$dir_arg"; then
 159     echo "$0: no input file specified." >&2
 160     exit 1
 161   fi
 162   # It's OK to call `install-sh -d' without argument.
 163   # This can happen when creating conditional directories.
 164   exit 0
 165 fi
 166
 167 for src
 168 do
 169   # Protect names starting with `-'.
 170   case $src in
 171     -*) src=./$src ;;
 172   esac
 173
 174   if test -n "$dir_arg"; then
 175     dst=$src
 176     src=
 177
 178     if test -d "$dst"; then
 179       mkdircmd=:
 180       chmodcmd=
 181     else
 182       mkdircmd=$mkdirprog
 183     fi
 184   else
 185     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
 186     # might cause directories to be created, which would be especially bad
 187     # if $src (and thus $dsttmp) contains '*'.
 188     if test ! -f "$src" && test ! -d "$src"; then
 189       echo "$0: $src does not exist." >&2
 190       exit 1
 191     fi
 192
 193     if test -z "$dstarg"; then
 194       echo "$0: no destination specified." >&2
 195       exit 1
 196     fi
 197
 198     dst=$dstarg
 199     # Protect names starting with `-'.
 200     case $dst in
 201       -*) dst=./$dst ;;
 202     esac
 203
 204     # If destination is a directory, append the input filename; won't work
 205     # if double slashes aren't ignored.
 206     if test -d "$dst"; then
 207       if test -n "$no_target_directory"; then
 208         echo "$0: $dstarg: Is a directory" >&2
 209         exit 1
 210       fi
 211       dst=$dst/`basename "$src"`
 212     fi
 213   fi
 214
 215   # This sed command emulates the dirname command.
 216   dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
 217
 218   # Make sure that the destination directory exists.
 219
 220   # Skip lots of stat calls in the usual case.
 221   if test ! -d "$dstdir"; then
 222     defaultIFS='
 223          '
 224     IFS="${IFS-$defaultIFS}"
 225
 226     oIFS=$IFS
 227     # Some sh's can't handle IFS=/ for some reason.
 228     IFS='%'
 229     set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
 230     shift
 231     IFS=$oIFS
 232
 233     pathcomp=
 234
 235     while test $# -ne 0 ; do
 236       pathcomp=$pathcomp$1
 237       shift
 238       if test ! -d "$pathcomp"; then
 239         $mkdirprog "$pathcomp"
 240         # mkdir can fail with a `File exist' error in case several
 241         # install-sh are creating the directory concurrently.  This
 242         # is OK.
 243         test -d "$pathcomp" || exit
 244       fi
 245       pathcomp=$pathcomp/
 246     done
 247   fi
 248
 249   if test -n "$dir_arg"; then
 250     $doit $mkdircmd "$dst" \
 251       && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
 252       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
 253       && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
 254       && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
 255
 256   else
 257     dstfile=`basename "$dst"`
 258
 259     # Make a couple of temp file names in the proper directory.
 260     dsttmp=$dstdir/_inst.$$_
 261     rmtmp=$dstdir/_rm.$$_
 262
 263     # Trap to clean up those temp files at exit.
 264     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
 265     trap '(exit $?); exit' 1 2 13 15
 266
 267     # Copy the file name to the temp name.
 268     $doit $cpprog "$src" "$dsttmp" &&
 269
 270     # and set any options; do chmod last to preserve setuid bits.
 271     #
 272     # If any of these fail, we abort the whole thing.  If we want to
 273     # ignore errors from any of these, just make sure not to ignore
 274     # errors from the above "$doit $cpprog $src $dsttmp" command.
 275     #
 276     { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
 277       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
 278       && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
 279       && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
 280
 281     # Now rename the file to the real destination.
 282     { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
 283       || {
 284            # The rename failed, perhaps because mv can't rename something else
 285            # to itself, or perhaps because mv is so ancient that it does not
 286            # support -f.
 287
 288            # Now remove or move aside any old file at destination location.
 289            # We try this two ways since rm can't unlink itself on some
 290            # systems and the destination file might be busy for other
 291            # reasons.  In this case, the final cleanup might fail but the new
 292            # file should still install successfully.
 293            {
 294              if test -f "$dstdir/$dstfile"; then
 295                $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
 296                || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
 297                || {
 298                  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
 299                  (exit 1); exit 1
 300                }
 301              else
 302                :
 303              fi
 304            } &&
 305
 306            # Now rename the file to the real destination.
 307            $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
 308          }
 309     }
 310   fi || { (exit 1); exit 1; }
 311 done
 312
 313 # The final little trick to "correctly" pass the exit status to the exit trap.
 314 {
 315   (exit 0); exit 0
 316 }
 317
 318 # Local variables:
 319 # eval: (add-hook 'write-file-hooks 'time-stamp)
 320 # time-stamp-start: "scriptversion="
 321 # time-stamp-format: "%:y-%02m-%02d.%02H"
 322 # time-stamp-end: "$"
 323 # End: