*default-synopsis* -> *synopsis*.

[clon.git] / doc / user.texi

\input texinfo

@c user.texi --- User manual

@c Copyright (C) 2010, 2011, 2012 Didier Verna.

@c Author:     Didier Verna <didier@lrde.epita.fr>
@c Maintainer: Didier Verna <didier@lrde.epita.fr>

@c This file is part of Clon.

@c Permission to use, copy, modify, and distribute this software for any
@c purpose with or without fee is hereby granted, provided that the above
@c copyright notice and this permission notice appear in all copies.

@c THIS SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
@c WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
@c MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
@c ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
@c WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
@c ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
@c OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.


@c Commentary:

@c Contents management by FCM version 0.1.


@c ====================================================================
@c Header
@c ====================================================================
@c %**start of header
@setfilename clon-user.info
@settitle The Clon User Manual
@afourpaper
@documentencoding ISO-8859-1
@c %**end of header



@c ====================================================================
@c Settings
@c ====================================================================
@set VERSION 1.0 beta 21 "Michael Brecker"
@set COPYRIGHT_DATE 2010, 2011, 2012
@setchapternewpage odd
@setcontentsaftertitlepage
@documentdescription
The Clon User Manual for version @value{VERSION}.
@end documentdescription



@c ====================================================================
@c New Commands
@c ====================================================================

@macro clon
@t{Clon}
@end macro

@macro cl
Common Lisp
@end macro

@macro tty
@t{tty}
@end macro

@macro etc
@i{etc.}
@end macro

@macro eg
@i{e.g.}
@end macro

@macro ie
@i{i.e.}
@end macro

@macro perse
@i{per-se}
@end macro

@macro cmdline
command-line
@end macro

@macro CmdLine
Command-Line
@end macro

@macro bioption{name}
@option{--clon-\name\}
@end macro


@c --------------------------------
@c Manuals cross-referencing macros
@c --------------------------------
@c The following 3 macros are here to circumvent the info filenames
@c changes, when referencing the end-user manual:

@macro pxenduserref{node}
@ifinfo
@pxref{\node\, , , clon-enduser, The Clon End-User Manual}
@end ifinfo
@ifnotinfo
@pxref{\node\, , , enduser, The Clon End-User Manual}
@end ifnotinfo
@end macro

@macro xenduserref{node}
@ifinfo
@xref{\node\, , , clon-enduser, The Clon End-User Manual}
@end ifinfo
@ifnotinfo
@xref{\node\, , , enduser, The Clon End-User Manual}
@end ifnotinfo
@end macro

@macro enduserref{node}
@ifinfo
@ref{\node\, , , clon-enduser, The Clon End-User Manual}
@end ifinfo
@ifnotinfo
@ref{\node\, , , enduser, The Clon End-User Manual}
@end ifnotinfo
@end macro


@c ---------------
@c Indexing macros
@c ---------------

@c Concept index
@c -------------

@c Built-in options
@macro bioindex{opt}
@cindex @t{--clon-\opt\}
@cindex Built-In Options, @t{--clon-\opt\}
@cindex Options, built-in, @t{--clon-\opt\}
@end macro

@c Common option properties
@macro copindex{prop}
@cindex Options, common properties, @t{\prop\}
@cindex Common Option Properties, @t{\prop\}
@end macro

@c Options
@c #### NOTE: not an alias because of argument syntax.
@macro oindex{name,class}
@cindex \name\ (@t{\class\})
@cindex Options, \name\ (@t{\class\})
@ocindex{\class\}
@end macro

@c Valued options
@macro voindex{name,class}
@cindex \name\ (@t{\class\})
@cindex Valued Options, \name\ (@t{\class\})
@cindex Options, valued, \name\ (@t{\class\})
@ocindex{\class\}
@end macro

@c Common valued option properties
@macro cvopindex{prop}
@cindex Valued Options, common properties, @t{\prop\}
@cindex Common Valued Option Properties, @t{\prop\}
@cindex Options, valued, common properties, @t{\prop\}
@end macro

@c Valued option properties
@macro vopindex{name,class,prop}
@cindex \name\ (@t{\class\}), properties, @t{\prop\}
@cindex Valued Options, \name\ (@t{\class\}), properties, @t{\prop\}
@cindex Options, valued, \name\ (@t{\class\}), properties, @t{\prop\}
@end macro

@c Configuration options
@macro coindex{name}
@vindex com.dvlsoft.clon.configuration
@cindex Configuration Option, @t{:\name\}
@cindex @t{:\name\}
@end macro


@c Functions index
@c ---------------

@c Function options
@macro foindex{func,opt}
@findex \func\@r{, options, }\opt\
@end macro

@c Function items
@macro fiindex{func,item}
@findex \func\@r{, items, }\item\
@end macro

@c Function keys
@macro fkindex{func,key}
@findex \func\@r{, keys, }\key\
@end macro

@c Function initargs
@macro fiaindex{func,arg}
@findex \func\@r{, initargs, }\arg\
@end macro

@c Generic functions sub-index
@macro gfsubindex{func}
@findex @r{Generic Functions, }\func\
@end macro

@c Generic functions
@macro gfindex{func}
@findex \func\
@gfsubindex{\func\}
@end macro

@c Generic function methods
@macro gfmindex{func,method}
@findex \func\@r{, methods, }\method\
@findex @r{Generic Functions, }\func\@r{, methods, }\method\
@end macro

@c #### FIXME: I need this because when using @defun, the function is
@c referenced directly but not under the Constructors sub-index. This
@c sucks because what I would like is the ability to define my own
@c @defXXX macros, which apparently I can't. Besides, doing this
@c produces 2 separate index entries, instead of only one with two pagerefs.
@c This problem stands for @gfsubindex (see above), @rfsubindex (see
@c below) and @ecsubindex (see below) as well.
@c Constructor functions sub-index
@macro cfsubindex{func}
@findex @r{Constructors, }\func\
@end macro

@c Constructor functions
@macro cfindex{func}
@findex \func\
@cfsubindex{\func\}
@end macro

@c Constructor function initargs
@macro cfiaindex{func,arg}
@fiaindex{\func\, \arg\}
@findex @r{Constructors, }\func\@r{, initargs, }\arg\
@end macro

@c Reader functions subindex
@macro rfsubindex{func}
@findex @r{Readers, }\func\
@end macro

@c Reader functions
@macro rfindex{func}
@findex \func\
@rfsubindex{\func\}
@end macro


@c Variables index
@c ---------------

@c Environment variables
@macro evindex{var}
@vindex \var\
@vindex @r{Environment, }\var\
@end macro

@c Built-in environment variables
@macro bievindex{var}
@evindex{CLON_\var\}
@end macro


@c Data Types index
@c ----------------

@c Classes
@macro clsindex{cls}
@tpindex \cls\
@tpindex @r{Classes, }\cls\
@end macro

@c Class slots
@macro clssindex{cls,slot}
@tpindex \cls\@r{, slots, }\slot\
@tpindex @r{Classes, }\cls\@r{, slots, }\slot\
@end macro

@c Class initargs
@macro clsiaindex{cls,arg}
@tpindex \cls\@r{, initargs, }\arg\
@tpindex @r{Classes, }\cls\@r{, initargs, }\arg\
@end macro

@c Option classes
@macro ocindex{cls}
@clsindex{\cls\}
@tpindex @r{Option Classes, }\cls\
@end macro

@c Error conditions subindex
@macro ecsubindex{cond}
@tpindex @r{Error Conditions, }\cond\
@end macro

@c Error conditions
@macro ecindex{cond}
@tpindex \cond\
@ecsubindex{\cond\}
@end macro

@c Error condition slots
@macro ecsindex{cond,slot}
@tpindex \cond\@r{, slots, }\slot\
@tpindex @r{Error Conditions, }\cond\@r{, slots, }\slot\
@end macro

@c Packages
@macro pkgindex{name}
@tpindex \name\
@tpindex @r{Packages, }\name\
@end macro

@c Systems
@macro sysindex{name}
@tpindex \name\
@tpindex @r{Systems, }\name\
@end macro



@c ====================================================================
@c Info Category and Directory
@c ====================================================================
@dircategory Common Lisp
@direntry
* Clon User: (clon-user).               The Clon User Manual.
@end direntry



@c ====================================================================
@c Copying
@c ====================================================================
@copying
@quotation
Copyright @copyright{} @value{COPYRIGHT_DATE} Didier Verna

Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

@ignore
Permission is granted to process this file through TeX and print the
results, provided the printed document carries a copying permission
notice identical to this one except for the removal of this paragraph
(this paragraph not being relevant to the printed manual).

@end ignore
Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided also that the
section entitled ``Copying'' is included exactly as in the original.

Permission is granted to copy and distribute translations of this manual
into another language, under the above conditions for modified versions,
except that this permission notice may be translated as well.
@end quotation
@end copying



@c ====================================================================
@c Title Page
@c ====================================================================
@titlepage
@title The Clon User Manual
@subtitle The @CmdLine{} Options Nuker, Version @value{VERSION}
@vskip 2cm
@image{splash,16cm}
@author Didier Verna <@email{didier@@lrde.epita.fr}>
@page
@vskip 0pt plus 1filll
@insertcopying

@hfill Cover art by Alexis Angelidis.
@end titlepage



@c ====================================================================
@c Table of Contents
@c ====================================================================
@contents



@c ====================================================================
@c Master Menu
@c ====================================================================
@ifnottex
@node Top, Copying, (dir), (dir)
@top The Clon User Manual

This is the @clon{} User Manual for @clon{} version @value{VERSION}:
it explains how to use @clon{} in your application.

@menu
* Copying::                 The BSD license
* Introduction::            What Clon is all about
* Installation::            Library, documentation and sample code
* Quick Start::             For the brave and the impatient
* Using Clon::              Clonificating your application
* Extending Clon::          Creating your own option types
* Advanced Usage::          Things rarely needed
* Conclusion::              That's all folks
* Technical Notes::         Configuration, platforms and portability
* API Quick Reference::     The Complete protocols
* Indexes::                 Concept, Function and Variable
* Acknowledgments::         Hall of Pride
@end menu

@insertcopying
@end ifnottex



@c ====================================================================
@c Copying
@c ====================================================================
@node Copying, Introduction, Top, Top
@unnumbered Copying

@quotation
Permission to use, copy, modify, and distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.

THIS SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
@end quotation



@c ====================================================================
@c Introduction
@c ====================================================================
@node Introduction, Installation, Copying, Top
@chapter Introduction

@clon{} is a library for managing @cmdline{} options in standalone @cl{}
applications. It provides a unified option syntax with both short and
long names, automatic completion of partial names and automatic
retrieval/conversion of option arguments from the @cmdline{}, associated
environment variables, fallback or default values. @clon{} comes with a
set of extensible option types (switches, paths, strings @etc{}).
@clon{} also provides automatic generation and formatting of help
strings, with support for highlighting on @tty{}'s through ISO/IEC 6429
SGR. This formatting is customizable through @emph{themes}.

Depending on the target audience, @clon{} stands for either ``The
@CmdLine{} Options Nuker'' or ``The @cl{} Options Nuker''. @clon{} also
has a recursive acronym: ``@clon{} Likes Options Nuking'', and a reverse
one: ``Never Omit to Link with @clon{}''. Other possible expansions of
the acronym are still being investigated.

This manual is for the @clon{} @emph{user}, that is, the developer of a
@cl{} application who wants to use @clon{} for @cmdline{} option
management@footnote{An application using @clon{} for its @cmdline{}
option management is said to be @emph{clonified}. It is also possible to
say @emph{clonfiscated}. However, we advise against using
@emph{clonistified}. The term @emph{clonificated} is also considered bad
style, and the use of @emph{clonificationated} is strictly prohibited.}.
As opposed to the user of the @emph{library}, the user of an
@emph{application} powered by @clon{} is called an @emph{end-user}.
@clon{} provides both a user manual (this one) and an end-user manual
(@pxenduserref{Top}). Everybody should read the end-user manual first.

@ref{Quick Start} provides a very short example in order to give an
overview of what's coming next. @ref{Using Clon} explains in detail how
to clonify your application, and @ref{Extending Clon} describe how to
extend @clon{} with your own option types.



@c ====================================================================
@c Installation
@c ====================================================================
@node Installation, Quick Start, Introduction, Top
@chapter Installation
@clon{} currently works on Unix (including MacOS X) and Windows (Cygwin
or MinGW) with SBCL, CMUCL, CCL, ECL, CLISP, ABCL, Allegro (both
standard and modern) and Lispworks. @clon{} is provided as an ASDF 2
system, but has no mandatory dependency. CFFI may optionally be used
with CLISP, Allegro and Lispworks. @xref{Supported Platforms}, for more
information.

In addition to the library itself, the Clon distribution offers
documentation in the form of 3 different manuals, some data files that
are needed for it to work properly, and a couple of demonstration
programs. Because of that, some bits of manual installation are needed.

After unpacking somewhere in the ASDF 2 source registry, please perform
the following steps, in order.

@enumerate
@item
Edit @file{Makefile.cnf} to your specific needs.

@item
Type @command{make} to compile the documentation and the demo programs
(end-user manual, user manual and possibly reference manual). By
default, the documentation is built in info, PDF and HTML formats. If
you want other formats (DVI and PostScript are available), type
@command{make all-formats}. You can also type individually @command{make
dvi} and/or @command{make ps} in order to get the corresponding format.

@item
As documented in @file{Makefile.cnf}, the reference manual is only
generated if you have SBCL and the Declt library at hand (see
@uref{http://www.lrde.epita.fr/~didier/software/lisp/misc.php#declt}).

@item
Type @command{make install} to install both the documentation and the
data files. If you have compiled the documentation in DVI and PostScript
format, those will be installed as well. The same goes for the reference
manual. The demo programs are not installed anywhere.
@end enumerate

Type @command{make uninstall} to uninstall the library.



@c ====================================================================
@c Quick Start
@c ====================================================================
@node Quick Start, Using Clon, Installation, Top
@chapter Quick Start
In this chapter, we assume that you have properly installed @clon{}
(@pxref{Technical Notes}), and we build a very short program to get you
started. Let's call it @file{quickstart.lisp}.

@menu
* Full Source::         The complete source code
* Explanation::         Step-by-step code walking
@end menu


@c -----------
@c Full Source
@c -----------
@node Full Source, Explanation, Quick Start, Quick Start
@section Full Source
For cut'n paste convenience, the complete source code is given below.
For a slightly longer example, have a look at the demonstration program
called @file{simple} in the distribution.

@cartouche
@verbatim
(in-package :cl-user)

(require :asdf)
(asdf:load-system :com.dvlsoft.clon)
(use-package :com.dvlsoft.clon)

(defsynopsis (:postfix "FILES...")
  (text :contents "A very short program.")
  (group (:header "Immediate exit options:")
    (flag :short-name "h" :long-name "help"
      :description "Print this help and exit.")
    (flag :short-name "v" :long-name "version"
          :description "Print version number and exit.")))

(defun main ()
  "Entry point for our standalone application."
  (make-context)
  (when (getopt :short-name "h")
    (help)
    (exit))
  (do-cmdline-options (option name value source)
    (print (list option name value source)))
  (terpri)
  (exit))

(dump "quickstart" main)
@end verbatim
@end cartouche


@c -----------
@c Explanation
@c -----------
@node Explanation, , Full Source, Quick Start
@section Explanation
Let's examine this program step-by-step now.

@pkgindex{com.dvlsoft.clon}@c
@sysindex{com.dvlsoft.clon}@c
First, we put ourselves in the @cl{} user package, and load @clon{} from
its ASDF system @samp{com.dvlsoft.clon}. Next, we use the @clon{}
package, also named @samp{com.dvlsoft.clon}.

@cartouche
@verbatim
(in-package :cl-user)

(require :asdf)
(asdf:load-system :com.dvlsoft.clon)
(use-package :com.dvlsoft.clon)
@end verbatim
@end cartouche

In fact, using the @clon{} package directly is done here for simplicity,
but is not recommended. In case you find the package name too long to
prefix every symbol with, @clon{} provides a utility function that
allows you to add (and use) a shorter nickname instead (the
demonstration programs in the distribution show how to use it):

@cindex Package, nicknames
@defun nickname-package &optional NICKNAME
Add NICKNAME (:CLON by default) to the :COM.DVLSOFT.CLON package.
@end defun

@cindex Synopsis
@findex defsynopsis
@cindex Postfix
@cindex Text, in synopsis
@cindex Options, in synopsis
@cindex Groups, in synopsis
@cindex Help String
The next thing you want to do is to create a set of options, groups or
texts that your application will recognize and/or display in its help
string. The structure of your @cmdline{} is known to @clon{} as the
@dfn{synopsis}. In order to create it, use the macro @code{defsynopsis}.

@foindex{defsynopsis,:postfix}
@fiindex{defsynopsis,text}
@fiindex{defsynopsis,options}
@fiindex{defsynopsis,group}
@cartouche
@verbatim
(defsynopsis (:postfix "FILES...")
  (text :contents "A very short program.")
  (group (:header "Immediate exit options:")
    (flag :short-name "h" :long-name "help"
      :description "Print this help and exit.")
    (flag :short-name "v" :long-name "version"
          :description "Print version number and exit.")))
@end verbatim
@end cartouche

Note that the synopsis has a double role: it not only serves to define
the options recognized by your application, but also the order in which
every element appears in the help string. In that particular example, we
define a line of text and a group with a header and two flags.

@cindex Context
@cfindex{make-context}
Now, we are going to define a function @code{main} for our standalone
application. The first thing that we need to do is create a
@dfn{context}. A context is an object that @clon{} uses to store various
things, including some state related to the parsing of the @cmdline{}.
You create a context with the function @code{make-context}.

@cartouche
@verbatim
(defun main ()
  "Entry point for our standalone application."
  (make-context)
@end verbatim
@end cartouche

@cindex Options Retrieval, explicit
@cindex Retrieval, of options, explicit
@findex getopt
@cindex Help String, display
@findex help
At that point, @clon{} is ready to retrieve the options you want from
the @cmdline{}. Let's first see if the user has called the option
@option{-h}, and give him the help string. Option retrieval is done with
the function @code{getopt}, and automatic help string output with the
function @code{help}. Note that what we do here is @emph{not} process
the @cmdline{} in sequence, but look directly for a specific option by
name (this retrieval method is said to be @dfn{explicit}).

@fkindex{getopt,:short-name}
@cartouche
@verbatim
  (when (getopt :short-name "h")
    (help)
    (exit))
@end verbatim
@end cartouche

@findex exit
The @code{exit} function is a wrapper around an
implementation-dependent way to exit (shall I say quit?) the @cl{}
environment, hence the program. It takes an optional argument that
stands for the exit status.

@cindex Options Retrieval, sequential
@cindex Retrieval, of options, sequential
@findex do-cmdline-options
And now, we are going to retrieve the other options and simply print
them. This time however, we process the @cmdline{} sequentially (so this
retrieval method is said to be @dfn{sequential}). This is done with the
@code{do-cmdline-options} macro. We also close the @code{main} function.

@cartouche
@verbatim
  (do-cmdline-options (option name value source)
    (print (list option name value source)))
  (terpri)
  (exit))
@end verbatim
@end cartouche

Finally, time to save the Lisp image.

@cindex Dumping
@findex dump
@cartouche
@verbatim
(dump "quickstart" main)
@end verbatim
@end cartouche

The first argument to @code{dump} is the name of the executable to
produce, and the second argument is the name of the function to call
automatically at startup.

In order to get a standalone executable from this program, all you need
to do now is to type @samp{CC=gcc sbcl --script quickstart.lisp}. Note
that the actual way of dumping executables is compiler-dependent. For
more information on the proper way to do it and on the compilers
currently supported, see @ref{Dumping Executables}.

Note also that it is possible to use @clon{} without actually dumping a
standalone executable (@pxref{Not Dumping Executables}).



@c ====================================================================
@c Using Clon
@c ====================================================================
@node Using Clon, Extending Clon, Quick Start, Top
@chapter Using Clon

Using @clon{} in your application is a two stages process. In phase 1,
you create a @dfn{synopsis}, which is a description of your
application's @cmdline{} and a @dfn{context}, which describes this
specific execution of the program. In phase 2, you retrieve the option
values and possibly display help strings. Phase 1 is called the
@dfn{initialization phase}, while phase 2 is called the @dfn{runtime
phase}.

@menu
* Synopsis Definition:: Describing your command-line
* Context Creation::    Instantiating your command-line
* Integrity Checks::    Verifying the Clon semantics
* Option Retrieval::    Getting the options values
* Help::                Generating the help string
@end menu


@c -------------------
@c Synopsis Definition
@c -------------------
@node Synopsis Definition, Context Creation, Using Clon, Using Clon
@section Synopsis Definition

@cindex Initialization Phase
@cindex Phase, initialization
@cindex Synopsis
@cindex Help String
Step one of the @clon{} initialization phase consists in defining a
@dfn{synopsis}. A synopsis is essentially a description of your
application's @cmdline{}: it describes what are the available options,
whether your application has a postfix @etc{} The synopsis, however,
plays a second role: it also describes the contents of your
application's help string. When you create a synopsis, you describe the
@cmdline{} and the help string at the same time.

@menu
* Synopsis Items::              Defsynopsis and its contents
* Built-In Option Types::       The exhaustive list
* Advanced Synopsis Creation::  The non-declarative way
@end menu

@node Synopsis Items, Built-In Option Types, Synopsis Definition, Synopsis Definition
@subsection Synopsis Items
Look again at the synopsis definition provided in @ref{Quick Start}.

@cartouche
@verbatim
(defsynopsis (:postfix "FILES...")
  (text :contents "A very short program.")
  (group (:header "Immediate exit options:")
    (flag :short-name "h" :long-name "help"
          :description "Print this help and exit.")
    (flag :short-name "v" :long-name "version"
          :description "Print version number and exit.")))
@end verbatim
@end cartouche

You define a synopsis with the @code{defsynopsis} macro.

@defmac defsynopsis ([OPTIONS@dots{}]) ITEMS@dots{}
Define a new synopsis and return it. @var{OPTIONS} are key/value pairs.
@var{ITEMS} are text, group or option descriptions.

The following @var{OPTIONS} are currently available.
@table @t
@item :postfix
@cindex Postfix
@foindex{defsynopsis,:postfix}@c
@cindex Command-Line, remainder
@cindex Remainder, of command-line
A string which will appear at the end of the synopsis line in the help
string. When you provide a postfix, you also implicitely tell @clon{}
that your application accepts non-option arguments at the end of the
@cmdline{} (this is called the @dfn{remainder} of the @cmdline{}). See
@enduserref{Option Separator} for more information on the behavior of
@clon{} with respect to postfixes. Also, see @ref{Command-Line
Remainder} on how to access the @cmdline{} remainder.
@end table
@end defmac

We now examine the syntax for each possible @var{ITEM}.
@menu
* Text::        Adding arbitrary text
* Options::     Adding options
* Groups::      Adding groups
@end menu

@node Text, Options, Synopsis Items, Synopsis Items
@subsubsection Text
@cindex Text
@cindex Text, in synopsis
@fiindex{defsynopsis,text}
In order to add arbitrary text to your help string, use the following
form:

@noindent
@t{(text} [@var{OPTIONS@dots{}}]@t{)}

@var{OPTIONS} are key/value pairs. The following @var{OPTIONS} are
currently available.
@table @t
@item :contents
@cindex Text, contents
The actual text string. Try to make proper sentences when adding
arbitrary text. You can use explicit newline characters in your text if
you really want to go next line, but in general, you should not worry
about the formatting because the themes are here to do so. In
particular, don't finish your text with a newline. This would break
potential theme specifications.
@item :hidden
@cindex Hidden Text
@cindex Text, hidden
@cindex Help String
When non-@code{nil}, the text won't appear in the help string. Hidden
texts can still be displayed individually though (@pxref{Help}).
@end table

@node Options, Groups, Text, Synopsis Items
@subsubsection Options
@cindex Options
@cindex Options, in synopsis
@fiindex{defsynopsis,options}
In order to add an option to your help string, you must provide a list
beginning with the option type and followed by key/value pairs
describing the option's properties. For instance, to add a flag with a
short name and a description, you could do this:

@verbatim
(flag :short-name "h" :description "Print this help and exit.")
@end verbatim

Option properties vary depending on the option type. The exact list of
available option types, and the corresponding properties are described
in @ref{Built-In Option Types}.

@node Groups, , Options, Synopsis Items
@subsubsection Groups
@cindex Groups
@cindex Groups, in synopsis
@fiindex{defsynopsis,group}
In order to add a group to your help string, use the following form:

@noindent
@t{(group} ([@var{OPTIONS@dots{}}]) @var{ITEMS@dots{}}@t{)}

@cindex Text, in groups
@cindex Options, in groups
@cindex Groups, in groups
@var{OPTIONS} are key/value pairs. @var{ITEMS} simply are arbitrary
text, option or sub-group descriptions as we've just seen.

The following @var{OPTIONS} are currently available.
@table @t
@item :header
@cindex Group Header
@cindex Header, in group
@foindex{defgroup,:header}@c
A string which will be displayed above the group's contents in the help
string. The same formatting recommendations as for arbitrary text apply
(@pxref{Text}).
@item :hidden
@cindex Hidden Groups
@cindex Groups, hidden
@foindex{defgroup,:hidden}@c
@cindex Help String
@cindex Built-In Groups
@cindex Groups, built-in
@bioindex{help}
When non-@code{nil}, the group won't appear in the help string. Hidden
groups can still be displayed individually though (@pxref{Help}). For
instance, the @clon{} built-in group is hidden in the regular help
string, but the @bioption{help} option still displays it individually.
@end table

@node Built-In Option Types, Advanced Synopsis Creation, Synopsis Items, Synopsis Definition
@subsection Built-In Option Types
@cindex Built-In Option Types
@cindex Options, built-in types
@cindex Option Types, built-in
In this section, we will review all the built-in option types that
@clon{} provides, along with their corresponding properties. You can use
them directly in your synopsis description. For adding personal option
types to @clon{}, see @ref{New Option Types}.

@menu
* Common Properties::                   For all options
* Flags::                               Built-in options without arguments
* Common Valued Option Properties::     For all valued options
* Built-In Valued Options::             Built-in options with arguments
@end menu

@node Common Properties, Flags, Built-In Option Types, Built-In Option Types
@subsubsection Common Properties
@cindex Options, common properties
@cindex Common Option Properties
@clsindex{option}
All option types in @clon{}, including those you define yourself
(@pxref{New Option Types}), have a set of basic, common properties. Here
is a list of them.

@table @code
@item :short-name
@copindex{:short-name}
The option's short name. A string or @code{nil}.
@item :long-name
@copindex{:long-name}
The option's long name. A string or @code{nil}.
@item :description
@copindex{:description}
The option's descriptive text. A string or @code{nil}. The same
formatting recommendations as for arbitrary text apply (@pxref{Text}).
@item :env-var
@copindex{:env-var}
The option's associated environment variable. A string or @code{nil}.
@item :hidden
@copindex{:hidden}
@cindex Hidden Options
@cindex Options, hidden
@cindex Help String
When non-@code{nil}, the option won't appear in the help string. Hidden
options can still be displayed individually though (@pxref{Help}).
@end table

Note that an option is required to have at least one name (either short
or long). Non-@code{nil} but empty names are also prohibited, and of
course, a short name cannot begin with a dash (otherwise, it would be
mistaken for a long name, but did I really need to mention this?).

@node Flags, Common Valued Option Properties, Common Properties, Built-In Option Types
@subsubsection Flags
@oindex{Flags,flag}
In @clon{}, options that don't take any argument are of type
@code{flag}. These options don't provide additional properties on top of
the common set described in @ref{Common Properties}. All properties
default to @code{nil}.

@node Common Valued Option Properties, Built-In Valued Options, Flags, Built-In Option Types
@subsubsection Common Valued Option Properties
@cindex Valued Options
@cindex Options, valued
@clsindex{valued-option}
All non-flag options in @clon{} are said to be @dfn{valued}. All valued
options, including those you define yourself (@pxref{New Option Types}),
share a set of additional properties. Here is a list of them.

@cindex Valued Options, common properties
@cindex Common Valued Option Properties
@cindex Options, valued, common properties
@table @code
@item :argument-name
@cvopindex{:argument-name}
The name of the option's argument, as it appears in the help string. It
defaults to @code{"ARG"}, so that for instance, a @samp{name} option
would appear like this: @samp{--name=ARG}.
@item :argument-type
@cvopindex{:argument-type}
The status of the argument. Possible values are @code{:required} (the
default) and @code{:mandatory} which are synonyms, or @code{:optional}.
@item :fallback-value
@cvopindex{:fallback-value}
@cindex Values, source, fallback
@item :default-value
@cvopindex{:default-value}
@cindex Values, source, default
The option's fallback and default values. Remember that a fallback value
only makes sense when the argument is optional. Besides, also when the
argument is optional, you need to provide at least a fallback or a
default value (or both of course; see @enduserref{Value Sources}).
@end table

@node Built-In Valued Options, , Common Valued Option Properties, Built-In Option Types
@subsubsection Built-In Valued Options
@cindex Option Types, valued
@cindex Built-In Option Types, valued
@cindex Options, built-in types, valued
@cindex Option Types, built-in, valued
@clon{} currently defines 6 built-in valued option types. These option
types may change the default value for some common properties, and / or
provide additional properties of their own. All of this is described
below.

@table @code
@item stropt
@voindex{Strings,stropt}@c
@cvopindex{:argument-name}@c
This option type is for options taking strings as their argument. String
options don't provide any additional properties, but their default
argument name is changed from @code{"ARG"} to @code{"STR"}.
@item lispobj
@voindex{Lisp Objects,lispobj}@c
@cvopindex{:argument-name}@c
@vopindex{Lisp Objects,lispobj,:typespec}@c
@bioindex{line-width}@c
This option type is for options taking any kind of Lisp object as their
argument. @code{lispobj} options change their default argument name from
@code{"ARG"} to @code{"OBJ"}. Also, they provide an additional property
called @code{:typespec} which must be a @cl{} type specifier that the
argument must satisfy. It defaults to @code{t}. Look at the
@bioption{line-width} built-in option for an example.
@item enum
@voindex{Enumerations,enum}@c
@cvopindex{:argument-name}@c
@vopindex{Enumerations,enum,:enum}@c
@bioindex{version}@c
This option type is for options taking values from an enumerated set of
keywords. @code{enum} options change their default argument name from
@code{"ARG"} to @code{"TYPE"}. Also, they provide an additional property
called @code{:enum} to store the list of @cl{} keywords enumerating the
possible values. The end-user does not use a colon when providing an
argument to an @code{enum} option. Only the keyword's name. The end-user
also has the ability to abbreviate the possible values. An empty
argument is considered as an abbreviation for the first element in the
set. Look at the @bioption{version} built-in option for an example.
@item path
@bioindex{search-path}@c
@bioindex{theme}@c
@voindex{Paths,path}@c
@cvopindex{:argument-name}@c
@vopindex{Paths,path,:type}@c
This option type is for options taking a colon-separated list of
pathnames as argument. @code{path} options change their default argument
name from @code{"ARG"} to @code{"PATH"}. Also, they provide an
additional property called @code{:type} which specifies the kind of path
which is expected. Possible values are: @code{:file}, @code{:directory},
@code{:file-list}, @code{:directory-list} or @code{nil} (meaning that
anything is allowed). Null paths are allowed, and may be provided by an
empty argument. Look at the @bioption{search-path} and
@bioption{theme} built-in options for examples.
@item switch
@voindex{Switches,switch}@c
@cvopindex{:argument-name}@c
@cvopindex{:argument-type}@c
@vopindex{Switches,switch,:argument-style}@c
This option type is for Boolean options. @code{switch} options change
their default argument type from required to optional and provide a
fallback value of @code{t} automatically for optional arguments.
@code{switch} options provide a new property called
@code{:argument-style}. Possible values are @code{:yes/no} (the
default), @code{:on/off}, @code{:true/false}, @code{:yup/nope},
@code{:yeah/nah}. This property affects the way the argument name and
true or false values are advertized in help strings. However, all
possible arguments forms (@pxenduserref{Switches}) are always available
to all switches.
@item xswitch
@voindex{Extended Switches,xswitch}@c
@cvopindex{:argument-name}@c
@cvopindex{:argument-type}@c
@vopindex{Extended Switches,xswitch,:argument-style}@c
@vopindex{Extended Switches,xswitch,:enum}@c
@bioindex{highlight}@c
This option type stands for @dfn{extended} switch. Extended switches
result from the mating of a male switch and a female enumeration, or the
other way around (elementary decency prevents me from describing this
mating process in detail): their possible values are either Boolean or
from an @code{:enum} property as in the case of @code{enum} options. As
simple switches, @code{xswitch} options change their default argument
type from required to optional and provide a fallback value of @code{t}
automatically for optional arguments. They also provide the
@code{:argument-style} property. Contrary to switches, however, this
property does not affect the argument name. It only affects the way true
or false values are displayed in help strings. Look at the
@bioption{highlight} built-in option for an example.
@end table

@node Advanced Synopsis Creation, , Built-In Option Types, Synopsis Definition
@subsection Advanced Synopsis Creation
@findex defsynopsis
The fact that @code{defsynopsis} lets you define things in a
@emph{declarative} way has not escaped you. Declarative is nice but
sometimes it gets in the way, so it is time to see how things work under
the hood. Every item in a synopsis is in fact implemented as an object
(an instance of some class), so it turns out that @code{defsynopsis}
simply is a convenience wrapper around the corresponding constructor
functions for all such objects. Instead of using @code{defsynopsis}, you
can then use those constructor functions explicitely.

@menu
* Constructors::        The expansion of defsynopsis
* Advantages::          Yes, but why?
* Group Definition::    The declarative way
@end menu

@node Constructors, Advantages, Advanced Synopsis Creation, Advanced Synopsis Creation
@subsubsection Constructors
Let's have a look at the expansion of @code{defsynopsis} from the quick
start example (@pxref{Quick Start}).

The original code is like this:

@cartouche
@verbatim
(defsynopsis (:postfix "FILES...")
  (text :contents "A very short program.")
  (group (:header "Immediate exit options:")
    (flag :short-name "h" :long-name "help"
          :description "Print this help and exit.")
    (flag :short-name "v" :long-name "version"
          :description "Print version number and exit.")))
@end verbatim
@end cartouche

And once the macro is expanded, it will look like this:

@cfindex make-synopsis
@cfindex make-text
@cfindex make-group
@cfindex make-flag
@findex defsynopsis@r{, expansion}
@cartouche
@verbatim
(make-synopsis :postfix "FILES..."
  :item (make-text :contents "A very short program.")
  :item (make-group :header "Immediate exit options:"
          :item (make-flag :short-name "h"
                           :long-name "help"
                           :description "Print this help and exit.")
          :item (make-flag :short-name "v"
                           :long-name "version"
                           :description "Print version number and exit.")))
@end verbatim
@end cartouche

As you can see, every synopsis element has a corresponding
@code{make-@var{SOMETHING}} constructor, and the keywords used here and
there in @code{defsyopsis} are in fact initargs to those constructors.
We now examine those constructors in greater detail.

@cindex Options, creation
@defun make-text [@code{:hidden} BOOL] @code{:contents} STRING
@cfsubindex{make-text}
@cfiaindex{make-text,:contents}
@cfiaindex{make-text,:hidden}
Create an arbitrary text object, possibly hidden, whose contents is
@var{STRING}.
@end defun

@c #### FIXME: I would like an environment without indexing here.
@defun make-@var{OPTION} :INITARG INITVAL@dots{}
@cfsubindex{make-@var{OPTION}}
@cfindex make-flag
@cfindex make-stropt
@cfindex make-lispobj
@cfindex make-enum
@cfindex make-path
@cfindex make-switch
@cfindex make-xswitch
Create a new @var{OPTION} object, @var{OPTION} being any built-in option
type (@code{flag}, @code{stropt} @etc{}, see @ref{Built-In Valued
Options}) or user-defined one (@pxref{New Option Types}). For a list of
available initialization arguments (depending on the option type), see
@ref{Built-In Option Types}.
@end defun

@defun make-group [@code{:header} STRING @code{:hidden} BOOL] @
@code{:item} ITEM1 @code{:item} ITEM2@dots{}
@cfsubindex{make-group}
@cfiaindex{make-group,:header}
@cfiaindex{make-group,:hidden}
@cfiaindex{make-group,:item}
@cindex Help String
Create a group object, possibly hidden, whose header is @var{STRING}.
Every @var{ITEM} is an arbitrary text object, option object or group
object. The order is important as it determines the display of the help
string.
@end defun

@defun make-synopsis [@code{:postfix} STRING] @
@code{:item} ITEM1 @code{:item} ITEM2@dots{}
@cfsubindex{make-synopsis}
@cfiaindex{make-synopsis,:postfix}
@cfiaindex{make-synopsis,:item}
@cindex Help String
Create a synopsis object whose postfix is @var{STRING}. Every @var{ITEM} is
an arbitrary text object, option object or group object. The order is
important as it determines the display of the help string.
@end defun

In fact, the @code{defsynopsis} macro allows you to freely mix
declarative forms, constructor calls or whatever Lisp code you may want
to use. The way this works is as follows: if a synopsis @var{ITEM}
(@pxref{Synopsis Items}) is a list whose @code{car} is @code{text},
@code{group}, or any option type (inluding those you define yourselves;
see @ref{New Option Types}), then the @var{ITEM} is expanded as
explained earlier. Otherwise, it is just left @emph{as-is}.

To sum up, here's a example of things you can do in @code{defsynopsis}.

@cartouche
@verbatim
(com.dvlsoft.clon:defsynopsis ()
  (flag #| ... |#)
  *my-great-option*
  (setq *another-option* (com.dvlsoft.clon:make-switch #| ... |#)))
@end verbatim
@end cartouche


@node Advantages, Group Definition, Constructors, Advanced Synopsis Creation
@subsubsection Advantages
@findex defsynopsis
So, why would you want to use constructors directly or mix declarative
and imperative forms in @code{defsynopsis}? There are several reasons
for doing so.
@enumerate
@item
Some people prefer to declare (or should I say, create) their arbitrary
texts, options and groups locally, in files, modules or ASDF components
where they belong. In such a case, you need to keep references to the
corresponding objects in order to compute the synopsis in the end.
@item
Since using constructors explicitely allows you to keep references to
the created objects, these objects can be @emph{reused}. For instance,
you can use the same text at different places, you can also use a single
option several times, or even a single group several times so that its
items appear in different places @etc{} Note that @clon{} knows its way
around multiple occurrences of the same object: even if you use the same
option object several times in a synopsis, @clon{} only maintains a
single option definition.
@end enumerate

@node Group Definition, , Advantages, Advanced Synopsis Creation
@subsubsection Group Definition
There is one last point we need to address in order to complete this
section. There might be times when you need to manipulate an explicit
group object, but the object itself can still be created in a
declarative (or mixed) way because you don't need to keep references on
its items. For this, @clon{} provides a macro called @code{defgroup}.

@defmac defgroup (OPTIONS@dots{}) ITEMS@dots{}
@cindex Groups, in synopsis
@fiindex{defsynopsis,group}
@foindex{defgroup,:header}
@foindex{defgroup,:hidden}
Define a new group and return it. This macro behaves exactly like the
@code{group} form in a call to @code{defsynopsis} (@pxref{Groups}). In
fact, an intermediate step in the expansion of the @code{defsynopsis}
macro is to transform @code{group} forms into @code{defgroup} macro
calls. As for @code{defsynopsis}, @code{defgroup} allows you to mix
declarative forms, constructor calls or any kind of Lisp code.
@end defmac



@c ----------------
@c Context Creation
@c ----------------
@node Context Creation, Integrity Checks, Synopsis Definition, Using Clon
@section Context Creation

@cindex Initialization Phase
@cindex Phase, initialization
@cindex Context
Step two of the @clon{} initialization phase consists in creating a
@dfn{context}. A context is an object representing a particular instance
of your program, for example (and most notably) with an actual
@cmdline{} as the user typed it.

@menu
* Making A Context::            The Constructor function
* Contextual Information::      Interesting context slots
@end menu

@node Making A Context, Contextual Information, Context Creation, Context Creation
@subsection Making A Context

@cfindex{make-context}
You create a context with the @code{make-context} function.

@defun make-context
@cfsubindex{make-context}
Create a new context. That's it.
@end defun

@node Contextual Information, , Making A Context, Context Creation
@subsection Contextual Information

Once a context object is created, you have access to some interesting
contextual information.

@menu
* Program Name::                As it appear on the command-line
* Command-Line Remainder::      The non-options part
* Command-Line Polling::        Whether something is left
@end menu

@node Program Name, Command-Line Remainder, Contextual Information, Contextual Information
@subsubsection Program Name
The application's program name, as it appears on the @cmdline{}, may be
accessed from @clon{}. You may find it easier to do this way, as @clon{}
wraps around implementation-dependent access methods to @code{argv[0]}.

@findex progname
In order to retrieve @code{argv[0]}, use the @code{progname} function
like this: @code{(progname)}.

@node Command-Line Remainder, Command-Line Polling, Program Name, Contextual Information
@subsubsection Command-Line Remainder
@cindex Remainder, of command-line
@cindex Command-Line, remainder
In the case your @cmdline{} has a remainder (that is, a non-options
part; see @enduserref{Option Separator} and @ref{Synopsis Items}), you
may need to access it in order to process it independently from @clon{}.
Since @clon{} is responsible for parsing the @cmdline{}, it is also in
charge of figuring out where the remainder of the @cmdline{} begins.

@findex remainder
The @cmdline{} remainder is known to @clon{} as soon as a context is
created. You can retrieve it by using the @code{remainder} function like
this: @code{(remainder)}. The remainder is provided as a list of strings.

@node Command-Line Polling, , Command-Line Remainder, Contextual Information
@subsubsection Command-Line Polling
@cindex Polling, of command-line
@cindex Command-Line, polling

@clon{} provides two utility functions to inquire on the current status
of the @cmdline{}.

@findex cmdline-options-p
@findex cmdnline-p
The function @code{cmdline-options-p} returns true if there are still
unprocessed options on the @cmdline{}. The function @code{cmdline-p}
returns true if there's @emph{anything} left on the @cmdline{}, that is,
either unprocessed options, or a remainder. A potential use of
@code{cmdline-p} at a very early stage of your application could be to
automatically display a help string if the @cmdline{} is effectively
empty.


@c ----------------
@c Integrity Checks
@c ----------------
@node Integrity Checks, Option Retrieval, Context Creation, Using Clon
@section Integrity Checks
@findex defsynopsis
@cfindex{make-context}
At this point, you know about the two necessary steps to initialize
@clon{}: defining a synopsis and creating a context. If you paid
attention to the quick start application (@pxref{Quick Start}), you may
have noticed that @code{defsynopsis} was called as a top-level form
whereas @code{make-context} was called from the function @code{main}. So
why the difference?

First, I hope that you see why a context cannot be created as a toplevel
form. If you do that, you will end-up creating a context relevant to the
Lisp environment from which the application is created, not run.

The synopsis, on the other hand, could be defined either as a toplevel
form, as done in the quick start and the demo programs, or in the
function @code{main}, just before making a context. There is a very good
reason to prefer a toplevel form however: that reason is called
``integrity checks''.

When you define a synopsis (or any synopsis item, for that matter),
@clon{} performs a number of checks to make sure that you're making a
sensible use of the library. In fact, the number of semantic mistakes
that you can make is quite puzzling. You could for instance define
several options with identical names, forget to provide a fallback or
default value when it is required, provide invalid fallback or default
values, and the list goes on and on. These are just a few examples but
there are many more, and @clon{} checks all of those (I think).

Since those mistakes relate to the definition of the application itself,
they do not depend on a particular execution of it. Consequently, the
sooner @clon{} catches them, the better. If you define your
application's synopsis as a toplevel form, @clon{} will be able to
perform its integrity checks when the application is created, not only
when it is used. In other words, you won't be able to get a working
application until your use of @clon{} is semantically correct.

This is why it is strongly recommended to create synopsis from toplevel
forms, and this also explains why @clon{} chooses @emph{not} to provide
an @code{initialize} function that would wrap around @code{defsynopsis}
and @code{make-context} together.



@c ----------------
@c Option Retrieval
@c ----------------
@node Option Retrieval, Help, Integrity Checks, Using Clon
@section Option Retrieval
@cindex Runtime Phase
@cindex Phase, runtime
@cindex Retrieval, of options
@cindex Options Retrieval

During the runtime phase of @clon{}, your main activity will be to
retrieve options and their values. @clon{} provides two techniques for
retrieving options: you can request the value for a specific option
directly, or you can process the @cmdline{} sequentially, which is the
more traditional approach.

@cindex Command-Line
@findex cmdline
Both of these techniques can be freely combined together at any time,
because @clon{} keeps track of the current status of the @cmdline{}. In
fact, @clon{} never works on the original @cmdline{}, but uses a mutable
@emph{copy} of it after parsing. If you want to access the real
@cmdline{} of your application (except for the compiler-specific
options, see @ref{Not Dumping Executables}), you may use the
@code{cmdline} function, which is a wrapper around an
implementation-dependent way to access it.


Finally, remember that the @cmdline{} is scanned from left to right
during option retrieval (@pxenduserref{Option Retrieval}).

@menu
* Explicit Retrieval::          Accessing options by name
* Sequential Retrieval::        Accessing options in order
@end menu

@node Explicit Retrieval, Sequential Retrieval, Option Retrieval, Option Retrieval
@subsection Explicit Retrieval
@cindex Options Retrieval, explicit
@cindex Retrieval, of options, explicit
Since @clon{} lets you retrieve options on demand (at any time), it
makes sense to be able to request the value of a specific option
explicitely. For instance, you might want to try the @samp{--help}
option first, without looking at the rest of the @cmdline{} because the
application will in fact quit immediately after having displayed the
help string.

@defun getopt :KEY VALUE@dots{}
Retrieve the value of a specific option. The following @var{:KEY}s are
currently available.

@table @code
@item :short-name
@item :long-name
@fkindex{getopt,:short-name}
@fkindex{getopt,:long-name}
Use one of these 2 keys to specify the name of the option you wish to
retrieve.
@item :option
@fkindex{getopt,:option}
Alternatively, you can use a reference to an option object
(@pxref{Constructors}).
@end table

This function return two values: the option's value and the value's
source (@pxenduserref{Value Sources}).
@end defun

The value's source may have the following forms:
@table @code
@item (:cmdline @var{NAME})
@cindex Values, source, @cmdline{}
This is for options found on the @cmdline{}. @var{NAME} is the name used
on the @cmdline{}. It can be the option's long or short name, or a
completed long name if the option's name was abbreviated. A completed
name displays the omitted parts in parentheses (@code{"he(lp)"} for
instance).
@item (:fallback @var{NAME})
@cvopindex{:fallback-value}
@cindex Values, source, fallback
The same but when the fallback value is used, that is, when an option is
not provided with its (optional) argument.
@item (:default @var{NAME})
@cvopindex{:default-value}
@cindex Values, source, default
The same, but when the default value is used (because there is no
fallback).
@item (:environment @var{VAR})
@copindex{:env-var}
@cindex Values, source, environment
This is for options not found on the @cmdline{} but for which there is
an associated environment variable set in the application's environment.
@var{VAR} is the name of the corresponding environment variable.
@item :default
@cvopindex{:default-value}
@cindex Values, source, default
This is for options not found anywhere, but for which a default value
was provided.
@end table

@oindex{Flags,flag}
@findex getopt
Note that because flags don't take any argument, @code{getopt} returns a
virtual value of @code{t} when they are found or a corresponding
environment variable exists in the environment. For the same reason, a
flag's value source may ony be @code{(:cmdline @var{NAME})} or
@code{(:environment @var{VAR})}.

@findex getopt
When an option is not found anywhere and there is no default value,
@code{getopt} just returns nil (no second value). Also, note that when
your option accepts @code{nil} as a value, you @emph{need} to handle the
second retrun value to make the difference between an option not found,
and an actual value of @code{nil}.


@node Sequential Retrieval, , Explicit Retrieval, Option Retrieval
@subsection Sequential Retrieval
@cindex Options Retrieval, sequential
@cindex Retrieval, of options, sequential
The more traditional approach to option retrieval is to scan the
@cmdline{} for options in their order of appearance. @clon{} supports
this by providing you with one function and two macros, as explained
below.

@defun getopt-cmdline
Get the @dfn{next} @cmdline{} option, that is, the first option on the
@cmdline{} that has not been previously retrieved, either explicitely or
sequentially.

When there are no more options on the @cmdline{}, this function returns
@code{nil}. Otherwise, four values are returned: the corresponding
option object from the synopsis definition (@pxref{Constructors}), the
name used on the @cmdline{}, the option's value and the value source
(@code{:cmdline}, @code{:fallback} or @code{:default}). As in the case
of explicit retrieval (@pxref{Explicit Retrieval}), the option's name
may be completed in case of abbreviation.

@rfindex{short-name}
@rfindex{long-name}
@copindex{:short-name}
@copindex{:long-name}
Unless you keep references to all your option objects (and thus can
compare them directly to the one returned by this function), you can
still identify the retrieved option by using the @code{short-name} and
@code{long-name} readers on it: simply use @code{(long-name
@var{OPTION})} or @code{(short-name @var{OPTION})} and you will get the
corresponding strings.
@end defun

@defmac multiple-value-getopt-cmdline (OPTION NAME VALUE SOURCE) BODY
Evaluate @var{BODY} with @var{OPTION}, @var{NAME}, @var{VALUE} and
@var{SOURCE} bound to the values returned by the @code{getopt-cmdline}
function above. Note that @var{BODY} is not evaluated if there was no
remaining option on the @cmdline{}, so you don't need to conditionalize
on @var{OPTION} being @code{null} yourself.
@end defmac

@defmac do-cmdline-options (OPTION NAME VALUE SOURCE) BODY
As above, but loop over all @cmdline{} options.
@end defmac


@c ----
@c Help
@c ----
@node Help, , Option Retrieval, Using Clon
@section Help
@cindex Help String
One of the first motivations in the design of @clon{} was to automate
the generation of the help string, which is a very boring maintenance
task to do by hand. The application's synopsis contains all the
necessary information to do so. In order to print your application's
help string, use the @code{help} function.

@defun help [@code{:item} ITEM]
@bioindex{search-path}
@bievindex{SEARCH_PATH}
@bioindex{highlight}
@bievindex{HIGHLIGHT}
@bioindex{theme}
@bievindex{THEME}
@bioindex{line-width}
@bievindex{LINE_WIDTH}
Print the application's help string. Printing honors the search path,
theme, line width and highlight settings provided by the corresponding
built-in options (@pxenduserref{Theme Mechanism}).
@end defun

@fkindex{help,:item}
By default, @code{help} prints the whole application help string,
excluding hidden items. However, if you have kept a reference to any
synopsis item (option, text, group), you can pass it as the value of the
@code{:item} key, and @clon{} will only print the help string for that
particular item. In this case however, the hidden state of the item is
discarded (but @emph{not} the ones of sub-items).

@bioindex{help}
@cindex Built-In Groups
@cindex Groups, built-in
@cindex Hidden Groups
@cindex Groups, hidden
For instance, the @clon{} built-in group is normally hidden, so it
doesn't show up in the global help string, but the @bioption{help}
option uses the @code{help} function on it explicitely, so it discards
its hidden state.

Here is a potentially useful application of hidden groups in conjunction
with the @code{:item} key. Look at ImageMagick's @file{convert}
program's help string for instance: it is 276 lines long. Gosh. The help
string is decomposed into several categories: image settings, image
operators, misc options @etc{}. If I were to implement this program, I
would rather have the @option{--help} option display an overview of the
program, advertise @option{--version} and a couple of others, and I
would then implement @option{--help} as an enumeration for listing every
option category individually (they would normally be stored in hidden
groups). The user could then use @option{--help=settings},
@option{--help=operators} and so on to display only the category she's
interested in.

Finally, here is potentially useful application of hidden options that
are never ever displayed in any help string whatsoever, and I mean,
like, ever. This is the perfect tool for backdoor'ing a program. For
instance, if you ever need to implement a
@option{--discard-all-security-measures-and-blow-the-nuke} option, then
you'd better have it hidden@dots{}



@c ====================================================================
@c Extending Clon
@c ====================================================================
@node Extending Clon, Advanced Usage, Using Clon, Top
@chapter Extending Clon

As you know, @clon{} already provides seven built-in option types: flags
and six other types for valued options (@pxref{Built-In Valued
Options}). After using @clon{} for a while, you may find that however
brilliant and perfectly designed it is, none of the provided built-in
types fullfill your requirements exactly. There are two ways around
this: the right way and the wrong way (hint).

@voindex{Strings,stropt}
The wrong, although perhaps quicker way would be to use the
@code{stropt} option type to simply retrieve unprocessed string values,
and then do whatever tweaking required on them. In doing so, you risk
reinventing some of @clon{}'s wheels.

The right way is to define a new option type. Properly defined option
types are a good thing because they allow for reusability and also
extensibility, since new option types can always be defined on top of
others.
@voindex{Enumerations,enum}
In this chapter we explain how to extend @clon{} by providing new option
types. We illustrate the process with the example of the built-in
@code{enum} one.

@cindex Valued Options
@cindex Options, valued
@oindex{Flags,flag}
Oh, and I almost forgot. I hope it is obvious to everyone that new
option types are always @emph{valued}. There's no point in extending
@clon{} with options that don't take any arguments, since we already
have flags.

@menu
* New Option Types::    In four steps
* Extension Tips::      Some advice
@end menu


@c ----------------
@c New Option Types
@c ----------------
@node New Option Types, Extension Tips, Extending Clon, Extending Clon
@section New Option Types
@cindex Option Types, in files
@cindex Files, one per option type
@pkgindex{com.dvlsoft.clon}
From a software engineering point of view, it is better to implement new
option types in a file of their own, preferably named after the option
type itself, and to put this file in the @clon{} package, like this:

@cartouche
@verbatim
(in-package :com.dvlsoft.clon)
@end verbatim
@end cartouche

Creating your own option type involves 5 steps: providing a class for
them, implementing three protocols related to argument/value tweaking,
and providing a constructor function. We now review those 5 steps in
order.

@menu
* New Option Classes::                  Step 1
* Value Check Protocol::                Step 2
* Argument Conversion Protocol::        Step 3
* Error Management::                    In-between steps coffee time!
* Value Stringification Protocol::      Step 4
* Constructor Functions::               Step 5
@end menu

@node New Option Classes, Value Check Protocol, New Option Types, New Option Types
@subsection New Option Classes
@clsindex{option}
@clsindex{valued-option}
@clon{} maintains a class hierarchy for all option types. The mother of
all option types is the @code{option} abstract class. It handles the
options'short and long names, description and associated environment
variable (@pxref{Common Properties}). Valued options inherit from an
abstract subclass of @code{option} called @code{valued-option}. This
class handles the option's argument name and status (optional or
mandatory), fallback and default values (@pxref{Common Valued Option
Properties}).

@cindex User-Defined Option Classes
@cindex Option Classes, user-defined
In order to create a new option type, use the @code{defoption} macro.

@defmac defoption CLASS SUPERCLASSES SLOTS &rest OPTIONS
Create a new option CLASS and register it with @clon{}.
Syntactically, thismacro behaves like @code{defclass}. Option types
created like this implicitely inherit from @code{valued-option} and in
turn @code{option}, so you don't need to put them explicitely in the
@var{SUPERCLASSES} list.
@end defmac

Let's look at the enumeration example now.

@cartouche
@verbatim
(defoption enum (enum-base)
  ((argument-name ;; inherited from the VALUED-OPTION class
    :initform "TYPE"))
  (:documentation "The ENUM class.
This class implements options whose values belong to a set of keywords."))
@end verbatim
@end cartouche

@voindex{Enumerations,enum}
@vopindex{Enumerations,enum,:enum}
@voindex{Extended Switches,xswitch}
@vopindex{Extended Switches,xswitch,:enum}
@clsindex{enum-base}
As you can see, this class inherits from @code{enum-base}, which is the
class handling the @code{:enum} property. The reason for this split is
that there are currently two option types providing enumeration-like
facility: @code{enum} and @code{xswitch}, so @code{xswitch} also
inherits from @code{enum-base}.

@clsindex{valued-option}
@cvopindex{:argument-name}
There are no new slots in this class, but the @code{argument-name} slot
provided by the @code{valued-option} class has its initform changed from
@code{"ARG"} to @code{"TYPE"}.

@node Value Check Protocol, Argument Conversion Protocol, New Option Classes, New Option Types
@subsection Value Check Protocol
@cindex Value Check Protocol
@cindex Protocols, value check
Now that we have our new option class, we need to implement the
so-called @dfn{value check} protocol. This protocol is used to make sure
that values provided for options of your new type actually comply with
the type in question. Values going through this protocol are fallback
values, default values, and values provided from a debugger restart
(@pxenduserref{Error Management}). In the case of fallback and default
values (which, by the way, are provided by @emph{you}, the @clon{}
user), the check is performed only once, when the option object is
created. Values provided from a debugger restart come from the
application end-user, and hence are checked every time.

The value check protocol is implemented through a @code{check} generic
function for which you must provide a method.

@deffn {Generic Function} check OPTION VALUE
@gfsubindex{check}
@ecindex invalid-value
Check that @var{VALUE} is valid for @var{OPTION}. If @var{VALUE} is
valid, return it. Otherwise, raise an @code{invalid-value} error.
@end deffn

As you can see, you need to provide a method with the first argument
specialized to your new option type. This method must return @var{VALUE}
if it is okay, and raise an @code{invalid-value} error otherwise.

@ecindex invalid-value
@clon{} maintains a hierarchy of error conditions. The
@code{invalid-value} error condition is defined like this:

@cartouche
@verbatim
(define-condition invalid-value (option-error)
  ((value :documentation "The invalid value."
          :initarg :value
          :reader value)
   (comment :documentation "An additional comment about the error."
            :type string
            :initarg :comment
            :reader comment))
  (:report (lambda (error stream)
             (format stream "Option ~A: invalid value ~S.~@[~%~A~]"
               (option error) (value error) (comment error))))
  (:documentation "An invalid value error."))
@end verbatim
@end cartouche

@ecindex invalid-value
@ecsindex{invalid-value,value}
@ecsindex{invalid-value,comment}
When the error is raised, you must fill in the @code{value} and
@code{comment} slots appropriately.
@ecindex option-error
@ecsindex{option-error,option}
The super-condition @code{option-error} provides an additional
@code{option} slot that you must also fill in when the error is raised.

@gfmindex{check,@r{Enumerations (}enum@r{)}}
@voindex{Enumerations,enum}
@vopindex{Enumerations,enum,:enum}
@findex list-to-string
Let's look at the enumeration example now.

@cartouche
@verbatim
(defmethod check ((enum enum) value)
  "Check that VALUE is a valid ENUM."
  (unless (member value (enum enum))
    (error 'invalid-value
           :option enum
           :value value
           :comment (format nil "Valid values are: ~A."
                      (list-to-string (enum enum)
                                      :key #'prin1-to-string))))
  value)
@end verbatim
@end cartouche

This code should be self-explanatory. We check that the value we got
belongs to the enumeration. @code{list-to-string} is a utility function
that will separate every element with comas in the resulting string.

@node Argument Conversion Protocol, Error Management, Value Check Protocol, New Option Types
@subsection Argument Conversion Protocol
@cindex Argument Conversion Protocol
@cindex Protocols, argument conversion
The next protocol we need to implement is the so-called @dfn{argument
conversion} protocol. This protocol is used to convert option arguments
(that is, strings) to an actual value of the proper type. Arguments
going through this protocol come from the @cmdline{}, the value of an
environment variable or a debugger restart (@pxenduserref{Error
Management}). Also, note that @clon{} assumes that you implement this
protocol correctly, so no value check is performed on values coming from
the conversion of an argument.

The conversion protocol is implemented through a @code{convert} generic
function for which you must provide a method.

@deffn {Generic Function} convert OPTION ARGUMENT
@gfsubindex{convert}
@ecindex invalid-argument
Convert @var{ARGUMENT} to @var{OPTION's} value. If @var{ARGUMENT} is
invalid, raise an @code{invalid-argument} error.
@end deffn

As you can see, you need to provide a method with the first argument
specialized to your new option type. This method must return the
conversion of @var{ARGUMENT} to the appropriate type if it is valid, and
raise an @code{invalid-argument} error otherwise.

@ecindex invalid-argument
The @code{invalid-argument} error condition is defined like this:

@cartouche
@verbatim
(define-condition invalid-argument (option-error)
  ((argument :documentation "The invalid argument."
             :type string
             :initarg :argument
             :reader argument)
   (comment :documentation "An additional comment about the error."
            :type string
            :initarg :comment
            :reader comment))
  (:report (lambda (error stream)
             (format stream "Option ~A: invalid argument ~S.~@[~%~A~]"
               (option error) (argument error) (comment error))))
  (:documentation "An invalid argument error."))
@end verbatim
@end cartouche

@ecindex invalid-argument
@ecsindex{invalid-argument,argument}
@ecsindex{invalid-argument,comment}
When the error is raised, you must fill in the @code{argument} and
@code{comment} slots appropriately.
@ecindex option-error
@ecsindex{option-error,option}
As before, the super-condition @code{option-error} provides an
additional @code{option} slot that you must also fill in when the error
is raised.

@gfmindex{convert,@r{Enumerations (}enum@r{)}}
@voindex{Enumerations,enum}
@vopindex{Enumerations,enum,:enum}
@findex closest-match
Let's look at the enumeration example now.

@cartouche
@verbatim
(defmethod convert ((enum enum) argument)
  "Convert ARGUMENT to an ENUM value."
  (or (closest-match argument (enum enum) :ignore-case t :key #'symbol-name)
      (error 'invalid-argument
             :option enum
             :argument argument
             :comment (format nil "Valid arguments are: ~A."
                        (list-to-string (enum enum)
                                        :key (lambda (value)
                                               (stringify enum value)))))))

@end verbatim
@end cartouche

Since enumerations allow their arguments to be abbreviated, a utility
function named @code{closest-match} is used to find the closest match
between an argument and the possible values. Otherwise, an
@code{invalid-argument} error is raised. For an explanation of
@code{stringify}, @xref{Value Stringification Protocol}.

@node Error Management, Value Stringification Protocol, Argument Conversion Protocol, New Option Types
@subsection Error Management
@cindex Debugger
@cindex Debugger restarts
Let's take a short break in our @clon{} extension process. We have seen
that @clon{} may throw errors in different situations, including invalid
arguments or values. The end-user manual advertises that the interactive
error handler offers a set of ``options to fix problems'' (if you don't
know what I'm talking about, please read @enduserref{Error Management}
and you will know). Well, you may have guessed that these options are
simply ``restarts'' (of course, we don't use that term there, as we
wouldn't want to frighten the casual user, or would we?).

When you ship your application, you are encouraged to disable the
debugger in the standalone executable because that also might scare the
casual user a little bit (the end-user manual only mentions the
@code{none} error-handler to explain that people shouldn't use it). The
way error handling is done in @cl{} standalone executables is
implementation-dependent, so please refer to your favorite compiler's
documentation. More generally, the behavior of @cl{} standalone
executables may depend on:
@itemize @bullet
@item
@cindex Dumping
the state of the Lisp environment when the application was dumped, which
may in turn depend on @cmdline{} options passed to the Lisp itself
(@pxref{Dumping Executables}),
@item
@findex dump
the arguments passed to the dumping function (look at @clon{}'s
@code{dump} macro to see what it does),
@item
worse: @emph{both}.
@end itemize

No, really, @cl{} is no fun at all.

@node Value Stringification Protocol, Constructor Functions, Error Management, New Option Types
@subsection Value Stringification Protocol
Okay, back to implementing our new option type.

@cindex Value Stringification Protocol
@cindex Protocols, value stringification
The third and last protocol we need to implement is called the
@dfn{value stringification} protocol. This protocol can be seen as the
reverse protocol for argument conversion (@pxref{Argument Conversion
Protocol}): its purpose is to transform an option's value into a
corresponding argument that the end-user could have provided in order to
get that value.

@cindex Help String
@cvopindex{:fallback-value}
@cindex Values, source, fallback
@cvopindex{:default-value}
@cindex Values, source, default
@gfmindex{convert,@r{Enumerations (}enum@r{)}}
The main use for this protocol is to advertise the fallback and default
values correctly in help strings: the end-user does not want to see
those @emph{values}, but rather the @emph{argument} that would lead to
them. However, you are free to use it wherever you like (see the
@code{convert} method for @code{enum} options for instance).

The value stringification protocol is implemented through a
@code{stringify} generic function for which you must provide a method.

@deffn {Generic Function} stringify OPTION VALUE
@gfsubindex{stringify}
Transform OPTION's @var{VALUE} into an argument.
@end deffn

I admit that this function could also have been called
@code{argumentize} or even @code{deconvertify}. As you can see, you need
to provide a method with the first argument specialized to your new
option type. You can assume that @var{VALUE} is a valid value for your
option, so no checking is necessary and no error needs to be raised.

@gfmindex{stringify,@r{Enumerations (}enum@r{)}}
@voindex{Enumerations,enum}
Let's look at the enumeration example now.

@cartouche
@verbatim
(defmethod stringify ((enum enum) value)
  "Transform ENUM's VALUE into an argument."
  (string-downcase (symbol-name value)))
@end verbatim
@end cartouche

Pretty straightforward, right?


@node Constructor Functions, , Value Stringification Protocol, New Option Types
@subsection Constructor Functions
@cindex Constructors, for options objects
@cindex Option Constructors
The last required step to complete our new option type extension is to
provide a @dfn{constructor} function that wraps around
@code{make-instance} on the corresponding option class. I won't insult
you by explaining how to write a constructor. Let me just give four good
reasons why providing constructors is important.

Providing a constructor for every new option type is important because:
@enumerate
@item
it is important,
@item
it is a good software engineering practice,
@item
it is important,
@item
@findex defsynopsis
@findex defgroup
and above all, it makes your new option type automatically available in
calls to @code{defsynopsis} and @code{defgroup} (@pxref{Synopsis Items}
and @ref{Group Definition}).
@end enumerate


@voindex{Enumerations,enum}
@cfindex{make-enum}
Let's look at the enumeration example now.

@cartouche
@verbatim
(defun make-enum (&rest keys
                  &key short-name long-name description
                       argument-name argument-type
                       enum env-var fallback-value default-value
                       hidden)
  "Make a new enum option.
- SHORT-NAME is the option's short name (without the dash).
  It defaults to nil.
- LONG-NAME is the option's long name (without the double-dash).
  It defaults to nil.
- DESCRIPTION is the option's description appearing in help strings.
  It defaults to nil.
- ARGUMENT-NAME is the option's argument name appearing in help strings.
- ARGUMENT-TYPE is one of :required, :mandatory or :optional (:required and
  :mandatory are synonyms).
  It defaults to :optional.
- ENUM is the set of possible values.
- ENV-VAR is the option's associated environment variable.
  It defaults to nil.
- FALLBACK-VALUE is the option's fallback value (for missing optional
  arguments), if any.
- DEFAULT-VALUE is the option's default value, if any.
- When HIDDEN, the option doesn't appear in help strings."
  (declare (ignore short-name long-name description
                  argument-name argument-type
                  enum env-var fallback-value default-value
                  hidden))
  (apply #'make-instance 'enum keys))
@end verbatim
@end cartouche

Woah, what a mouthful for a single line of code@dots{} Yeah, I'm a
maniac and I like redundancy. I always restate all the available keys
explicitely, and everything again in the docstring so that all the
interesting information is directly available (I might change my mind as
I grow older though).


@c --------------
@c Extension Tips
@c --------------
@node Extension Tips, , New Option Types, Extending Clon
@section Extension Tips
So that's it. Now you know how to extend @clon{} with your own option
types. Here is some piece of advice that you might find useful in the
process.

@menu
* Incremental Option Types::    Doing without defoption
* Lisp Option Abuse::           Thinking in end-user terms
@end menu

@node Incremental Option Types, Lisp Option Abuse, Extension Tips, Extension Tips
@subsection Incremental Option Types
@findex defoption
If one of the built-in options is almost what you need, you may be
tempted to subclass it directly instead of using @code{defoption}, and
only change what's needed, After all, it's Lisp. Lisp is a world of
mess@t{^D^D^D^D}freedom.

Wrong.

@findex defsynopsis
@findex defgroup
@code{defoption} is not @emph{only} a convenience wrapper around
@code{defclass}. It also arranges for @code{defsynopsis} and
@code{defgroup} to recognize your new option type. So please, do use it
systematically.

@node Lisp Option Abuse, , Incremental Option Types, Extension Tips
@subsection Lisp Option Abuse
@voindex{Lisp Objects,lispobj}
@vopindex{Lisp Objects,lispobj,:typespec}
Along with the same lines, you may find that the @code{lispobj} type is
all you need in many situations. Let's take an example. Suppose you want
to implement a @code{--stars} option to assign a rank to a movie, from 0
to 5. The lazy approach is to simply create a @code{lispobj} option with
a @code{:typespec} (type specifier) of @code{(integer 0 5)} and you're
done.

But now, remember that the end-user of your application is probably not
a Lisper (in fact, I would hope that @clon{} contributes to increasing
the number of standalone @cl{} applications out there@dots{}). What do
you think would be her reaction, if, after providing a bogus value to
the @code{--stars} option, she get the following error message:

@verbatim
 Option 'stars': invalid argument "6".
Argument "6" must evaluate to (integer 0 5).
@end verbatim

or worse, a @code{"Cannot parse argument"} error message because of a
typo?

Not very friendly, right? In other words, you need to think in terms of
what the end-user of your application will expect. In that particular
situation, you might want to subclass @code{lispobj} (with
@code{defoption}!) only to provide friendlier error messages.



@c ====================================================================
@c Advanced Usage
@c ====================================================================
@node Advanced Usage, Conclusion, Extending Clon, Top
@chapter Advanced Usage

This chapter contains information about different features that are
present in @clon{} because of design decisions, but that I expect to be
used only rarely, if at all.

@menu
* Multiple Clon Instances::     Different command-lines, synopsis or contexts
* Programmatic Help Strings::   Beyond the --help option
* Version Numbering::           In case you need to conditionalize
@end menu


@c -----------------------
@c Multiple Clon Instances
@c -----------------------
@node Multiple Clon Instances, Programmatic Help Strings, Advanced Usage, Advanced Usage
@section Multiple @clon{} Instances

It is possible to use different instances of @clon{} in parallel in a
single application, by using a virtual @cmdline{} instead of the real
one, different synopsis and multiple contexts simultaneously.

@menu
* Using Different Synopsis::            The default one, and the others
* Using Different Command-Lines::       The real one, and the others
* Using Multiple Contexts::             The current one, and the others
* Potential Uses::                      What to do with all that
@end menu

@node Using Different Synopsis, Using Different Command-Lines, Multiple Clon Instances, Multiple Clon Instances
@subsection Using Different Synopsis
@cindex Synopsis, default
Did you notice that after defining a synopsis, there is actually never
any explicit reference to it anymore? So where is the magick? In fact,
there's no magick at all involved here.

@vindex *synopsis*
@foindex{defsynopsis,:make-default}
@cfiaindex{make-synopsis,:make-default}
@clon{} has a global variable named @code{*synopsis*} which holds the
current synopsis. When you define/create a synopsis with either
@code{defsynopsis} or @code{make-synopsis}, it is automatically made the
default one, unless you use the @code{:make-default} option/initarg with
a value of @code{nil}, like this:

@verbatim
(defsynopsis (:make-default nil) ...)
@end verbatim

or this:

@verbatim
(make-synopsis :make-default nil ...)
@end verbatim

@cfindex{make-context}
When you create a context with @code{make-context}, the default synopsis
is used implicitely, but you have two ways to avoid this.

@enumerate
@item
@vindex *synopsis*
At any time in your program, you may change the value of
@code{*synopsis*}. All subsequent calls to @code{make-context} will
hence use this other synopsis.
@item
@cfiaindex{make-context,:synopsis}@c
If you prefer to use another synopsis only temporarily, you can use the
@code{:synopsis} initarg to @code{make-context} instead.
@end enumerate

@node Using Different Command-Lines, Using Multiple Contexts, Using Different Synopsis, Multiple Clon Instances
@subsection Using Different Command-Lines
In @ref{Context Creation}, we saw that a context object describes a
particular instance of your application, most notably depending on the
actual @cmdline{} the end-user provided. It turns out, however that the
@cmdline{} doesn't need to be the actual program's @cmdline{}, as the
user typed it. Any list of strings can act as a @cmdline{}.

@cfiaindex{make-context,:cmdline}
The function @code{make-context} has a @code{:cmdline} key that allows
you to provide any list of strings that will act as the @cmdline{}. Of
course, the default is to use the actual program's one.

@node Using Multiple Contexts, Potential Uses, Using Different Command-Lines, Multiple Clon Instances
@subsection Using Multiple Contexts
@cindex Context, current
Did you also notice that after creating a context, there is actually
never any explicit reference to it anymore? So again, where is the
magick? In fact, there's no magick at all involved here either.

@vindex *context*
@cfiaindex{make-context,:make-current}@c
@clon{} has a global variable named @code{*context*} which holds the
current context. When you create a context with @code{make-context}, it
is automatically made current, unless you use the @code{:make-current}
initarg with a value of @code{nil}.

@cindex Runtime Phase
@findex progname
@findex remainder
@findex cmdline-options-p
@findex cmdline-p
@findex getopt
@findex getopt-cmdline
@findex multiple-value-getopt-cmdline
@findex do-cmdline-options
@findex help
The whole runtime phase API of @clon{} uses a context implicitely. This
involves @code{progname}, @code{remainder}, @code{cmdline-options-p},
@code{cmdline-p}, @code{getopt}, @code{getopt-cmdline},
@code{multiple-value-getopt-cmdline}, @code{do-cmdline-options} and
@code{help}. As a consequence, it is possible to use @clon{} with
multiple contexts at the same time. There are in fact three ways to
achieve this.

@enumerate
@item
@vindex *context*
At any time in your program, you may change the value of
@code{*context*}. All subsequent calls to the runtime phase API
will hence use this other context.
@item
@clon{} also provides a macro which changes the current context for you.
@defun with-context CONTEXT &body BODY
Execute @var{BODY} with @code{*context*} bound to @var{CONTEXT}.
@end defun
@item
@fkindex{progname,:context}@c
@fkindex{remainder,:context}@c
@fkindex{cmdline-options-p,:context}@c
@fkindex{cmdline-p,:context}@c
@fkindex{getopt,:context}@c
@fkindex{getopt-cmdline,:context}@c
@fkindex{help,:context}@c
@foindex{multiple-value-getopt-cmdline,:context}@c
@foindex{do-cmdline-options,:context}@c
If you prefer to use another context only once, you can use the
@code{:context} key instead. The whole runtime phase API of @clon{}
understands it. For the functions @code{getopt}, @code{getopt-cmdline}
and @code{help}, it's just another key in addition to those we've
already seen. For the macros @code{multiple-value-getopt-cmdline} and
@code{do-cmdline-options}, the key must appear at the end of the first
(list) argument, like this:

@verbatim
(multiple-value-getopt-cmdline (option name value :context ctx) ...)
(do-cmdline-options (option name value :context ctx) ...)
@end verbatim
@end enumerate

@node Potential Uses, , Using Multiple Contexts, Multiple Clon Instances
@subsection Potential Uses
By combining @clon{}'s ability to use a virtual @cmdline{}, different
synopsis and multiple contexts, you can achieve very neat (read: totally
useless) things. For instance, you could write an application that takes
an option providing @cmdline{} arguments for an external program to be
forked. Some revision control systems do that for controlling external
@code{diff} programs for instance, so no big deal. The big deal is that
you can completely control the validity of the external program's
@cmdline{}, before it is forked, from your original one.

Here is another idea, again related to revision control systems. Some of
them feature a @cmdline{} syntax like the following:

@verbatim
prog [global options] command [command-specific options]
@end verbatim

@cindex Postfix
@cindex Command-Line, remainder
@cindex Remainder, of command-line
You can achieve this with @clon{} quite easily. In fact, the
demonstration program called @file{advanced} in the distribution shows
you how to do it. First, define a synopsis which only handles the global
options, and provide a postfix of @code{"command [command-specific
option]"} or something like that. This will authorize a @cmdline{}
remainder which will start with the command name.

Now, for every command in your program, define a specific synopsis with
only the command-specific options. Get the remainder of the original
@cmdline{} (@pxref{Command-Line Remainder}) and figure out which command
was used. Depending on it, create a new context with the appropriate
synopsis and the original @cmdline{}'s remainder as the new, virtual,
@cmdline{}. You're done: retrieve global options from the first context,
and command-specific ones from the second one.

@cindex Help String, display
@findex help
What's even cooler is that you can display the command-specific options
on demand quite easily as well (like what @file{git} does when you call
it like this: @code{git commit --help} for instance): calling the
@code{help} function on the original context gives you the global
options's help string while calling it on the command-specific one will
display the command-specific usage.

@bioindex{search-path}
@bievindex{SEARCH_PATH}
@bioindex{highlight}
@bievindex{HIGHLIGHT}
@bioindex{theme}
@bievindex{THEME}
@bioindex{line-width}
@bievindex{LINE_WIDTH}
One thing to remember here is that every context/synopsis duet you
create gets its own set of built-in @clon{} options. As a consequence,
there is currently no simple way to have a single set of built-in
options apply to the whole application, for instance, to both a global
and a command-specific context. Let me make this clearer: if your
end-user calls @code{prog --clon-theme=foo command -h}, then the theme
option will have no effect because it would only affect the global help
option. In order to actually use the expected theme, your end-user would
need to use @code{prog command --clon-theme=foo -h}. Depending on which
cerebral emisphere (s)he prefers to use, this may seem logical or not.

Finally, note that you can use the virtual @cmdline{} / specific
synopsis technique recursively to manage complicated @cmdline{} syntax,
for instance alternating options and non-options parts several times.

In the future, @clon{} may provide better ways to achieve this kind of
things (a notion of ``sub-context'' may be in order).



@c -------------------------
@c Programmatic Help Strings
@c -------------------------
@node Programmatic Help Strings, Version Numbering, Multiple Clon Instances, Advanced Usage
@section Programmatic Help Strings

@findex help
@cindex Help String
@cindex Themes
@cindex Themes, standard, @t{refcard}
@cindex Standard Themes, @t{refcard}
So far, we've seen how to use the @code{help} function to implement a
typical @code{--help} option. This is mostly intended for the end-user.
There are also times when this function could be useful to @emph{you},
the application developer. For instance, one could imagine that part of
the compilation phase would involve generating the help string in order
to include it in the manual. Another idea would be that @samp{make
install} creates a @file{REFCARD} file in
@file{/usr/local/share/doc/my-app/} which contains the help string
formatted with the @code{refcard} theme, @etc{}.

@bioindex{theme}
@bievindex{THEME}
@bioindex{search-path}
@bievindex{SEARCH_PATH}
@bioindex{line-width}
@bievindex{LINE_WIDTH}
@bioindex{highlight}
@bievindex{HIGHLIGHT}
In such situations, calling the @code{help} function might not be
directly associated with an end-user level option, or at least not
@code{--help}, and you might not want to honor the end-user level
settings for theme, search path, line-width, or highlighting either
(remember that these settings might come from the environment variables
associated with @bioption{theme}, @bioption{search-path},
@bioption{line-width} and @bioption{highlight}).

@fkindex{help,:theme}
@fkindex{help,:search-path}
@fkindex{help,:line-width}
@fkindex{help,:highlight}
Because of this, the @code{help} function provides additional keys that
allow you to override those settings (they are in fact stored in the
context object). The keys in question are: @code{:theme},
@code{:search-path}, @code{:line-width} and @code{:highlight}.

@fkindex{help,:output-stream}
@vindex *standard-output*
In addition to that, there is an @code{:output-stream} key which
defaults to @code{*standard-output*} which you could use for instance to
write directly to a file. Note that there is no end-user level access to
this parameter.



@c -----------------
@c Version Numbering
@c -----------------
@node Version Numbering, , Programmatic Help Strings, Advanced Usage
@section Version Numbering

@bioindex{version}
As @clon{} evolves over time, you might one day feel the need for
conditionalizing your code on the version of the library. While the
end-user of your application has limited means to access the current
version number of @clon{} (see @enduserref{Clonification} and the
built-in option @bioption{version}), you, the application programmer
and @clon{} user, have a finer grained access to it.

The first thing you can do to access the current version number of
@clon{} is use the @code{version} function (this is in fact the function
bound to the @bioption{version} option).

@defun version &optional (TYPE :number)
Return the current version number of @clon{}. @var{TYPE} can be one of
@code{:number}, @code{:short} or @code{:long}. For @code{:number}, the
returned value is a fixnum. Otherwise, it is a string.
@end defun

A @clon{} version is characterized by 4 elements as described below.
@itemize
@item
@vindex +release-major-level+
A major version number stored in the constant
@code{+release-major-level+}.
@item
@vindex +release-minor-level+
A minor version number, stored in the constant
@code{+release-minor-level+}.
@item
@vindex +release-status+
A release status stored in the constant @code{+release-status+}. The
status of a release can be @code{:alpha}, @code{:beta}, @code{:rc}
(standing for ``release candidate'') or @code{:patchlevel}. These are in
effect 4 levels of expected stability.
@item
@vindex +release-status-level+
A status-specific version number stored in the constant
@code{+release-status-level+}. Status levels start at 1 (alpha 1, beta 1
and release candidate 1) except for stable versions, in which case patch
levels start at 0 (@eg{} 2.4.0).
@end itemize

@vindex +release-name+
In addition to that, each version of @clon{} (in the sense
@emph{major.minor}, regardless of the status) has a name, stored in the
constant @code{+release-name+}. The general theme for @clon{} is ``Great
Jazz Musicians'', and specifically for the 1.x series: ``Great Saxophone
Players''. Anyone daring to mention Kenny G at that point will be shot
on sight.

Here is how the @code{version} function computes its value.
@itemize
@item
A version @code{:number} is computed as @emph{major . 10000 + minor .
100 + patchlevel}, effectively leaving two digits for each level. Note
that alpha, beta and release candidate status are ignored in version
numbers (this is as if the corresponding status level was considered to
be always 0). Only stable releases have their level taken into account.
@item
A @code{:short} version will appear like this for unstable releases:
1.3a4, 2.5b8 or 4.2rc1. Remember that alpha, beta or release candidate
levels start at 1. Patchlevels for stable releases start at 0 but 0 is
ignored in the output. So for instance, version 4.3.2 will appear as-is,
while version 1.3.0 will appear as just 1.3.
@item
A @code{:long} version is expanded from the short one, and includes the
release name. For instance, 1.3 alpha 4 "Bill Evans", 2.5 beta 8 "Scott
Henderson", 4.2 release candidate 1 "Herbie Hancock" or 4.3.2 "Chick
Corea". As for the short version, a patchlevel of 0 is ignored in the
output: 1.3 "Bill Evans".
@end itemize



@c ====================================================================
@c Conclusion
@c ====================================================================
@node Conclusion, Technical Notes, Advanced Usage, Top
@chapter Conclusion

So that's it I guess. You know all about @clon{} now. The next step is
to actually use it to clonify your favorite application, write new
applications using it and contaminate the world with standalone @cl{}
programs, featuring unprecedented @cmdline{} power and thrill-a-minute
option hacking.

Now, go Luke. The Attack of the @clon{} is ready to begin.



@c ====================================================================
@c Technical Notes
@c ====================================================================
@node Technical Notes, API Quick Reference, Conclusion, Top
@appendix Technical Notes

This chapter contains important information about the library's
configuration, supported platforms, non-ANSI features and
portability concerns.

@menu
* Configuration::               Pre-loading parameters
* Non-ANSI Features::           Requiring operating system access
* Supported Platforms::         Systems, compilers and dependencies
* Dumping Executables::         Convenience wrappers
* Not Dumping Executables::     Using Clon interactively
@end menu


@c -------------
@c Configuration
@c -------------
@node Configuration, Non-ANSI Features, Technical Notes, Technical Notes
@section Configuration
@cindex Configuration
@vindex com.dvlsoft.clon.configuration
Some aspects of @clon{}'s behavior can be configured @emph{before} the
ASDF system is actually loaded. @clon{} looks for configuration options
in a variable called @code{com.dvlsoft.clon.configuration} in the
@code{cl-user} package. If set, this variable should contain a property
list of configuration options and their corresponding values. Currently,
the following options are provided.

@table @t
@item :swank-eval-in-emacs
@coindex{swank-eval-in-emacs}@c
@vindex slime-enable-evaluate-in-emacs
This option is only useful if you use Slime, and mostly if you plan on
hacking @clon{} itself. The library provides indentation information for
some of its functions directly embedded in the code. This information
can be automatically transmitted to (X)Emacs when the ASDF system is
loaded if you set this option to @code{t}. However, note that for this
to work, the Slime variable @code{slime-enable-evaluate-in-emacs} must
also be set to @code{t} in your (X)Emacs session. If you're interested
to know how this process works, I have described it in the following
blog entry:
@uref{http://www.didierverna.com/sciblog/index.php?post/2011/07/20/One-more-indentation-hack}.
@item :restricted
@coindex{restricted}@c
@cindex Restricted Mode
Some non-ANSI features of @clon{} require external functionality that
may not be available in all contexts. Normally, @clon{} should
autodetect this and switch to so-called @emph{restricted mode} at
build-time (@pxref{Non-ANSI Features}). If @clon{} has failed to
autodetect the problem (in which case I would like to know), or if for
some reason, you explicitly want to disable those features, you may set
the @code{:restricted} configuration option to @code{t}.
@item :dump
@coindex{dump}@c
This option is only used by the ABCL port. @ref{Dumping Executables},
provides more information on its use.
@end table


@c -----------------
@c Non-ANSI Features
@c -----------------
@node Non-ANSI Features, Supported Platforms, Configuration, Technical Notes
@section Non-ANSI Features
One feature of @clon{} that is beyond the ANSI standard is terminal
autodetection (it requires an @code{ioctl} call and hence a foreign
function interface). Terminal autodetection is used in several
situations, for turning on highlighting automatically and for detecting
a terminal line width.

@cindex Restricted Mode
If, for some reason, terminal autodetection is not available, @clon{}
will work in so-called @emph{restricted mode}. This means that
@bioption{highlight=auto} won't work (highlighting will @emph{not} be
turned on automatically on a @tty{}). For the same reason, unless
otherwise specified via either the @code{COLUMNS} environment variable
or the @bioption{line-width} option, terminal output will be formatted
for 80 columns regardless of the actual terminal width
(@pxenduserref{Global Control}).


@c ----------------------
@c Supported Platforms
@c ----------------------
@node Supported Platforms, Dumping Executables, Non-ANSI Features, Technical Notes
@section Supported Platforms
@clon{} currently works on Unix (including MacOS X) and Windows (Cygwin
or MinGW) and has been ported to 8 @cl{} implementations. The following
table lists the supported platforms.

@multitable {Compiler} {Minimum Version} {@code{cffi} (optional)}
@headitem Compiler @tab Minimum Version @tab Dependencies
@item SBCL
@tab
@tab
@item CMU-CL
@tab 20b
@tab
@item CCL
@tab
@tab
@item ECL
@tab 11.1.2@footnote{more precisely, git revision
3e2e5f9dc3c5176ef6ef8d7794bfa43f1af8f8db}
@tab
@item CLISP
@tab
@tab @code{cffi} (optional)
@item ABCL
@tab 0.24.0@footnote{more precisely, svn trunk revision 13156}
@tab
@item Allegro@footnote{both standard and modern images are supported}
@tab
@tab @code{cffi} (optional)
@item Lispworks
@tab
@tab @code{cffi} (optional)
@end multitable

@unnumberedsubsec CLISP, Allegro and Lispworks specificities
@cindex Restricted Mode
As mentioned in the above table, CLISP, Allegro and Lispworks dependency
on @code{cffi} is optional. They need @code{cffi} in order to implement
terminal autodetection only (note that many other implementations come
with their own foreign function interface). If @code{cffi} cannot be
found when the ASDF system is loaded (or in the case of CLISP, if it has
been compiled without @code{ffi} support), you get a big red blinking
light and a warning but that's all. @clon{} will still work, although in
restricted mode.

@unnumberedsubsec ABCL specificities
@clon{}'s ABCL port currently has two limitations:
@itemize @bullet
@item
@bioindex{highlight}@c
@bioindex{line-width}@c
@evindex{COLUMNS}@c
@cindex Restricted Mode
It only works in restricted mode (@pxref{Non-ANSI Features}).
@item
Since Java doesn't have a @code{putenv} or @code{setenv} function (!!),
the @code{modify-environment} restart, normally proposed when an
environment variable is set to a bogus value, is unavailable
(@pxenduserref{Error Management}).
@end itemize


@c -------------------
@c Dumping Executables
@c -------------------
@node Dumping Executables, Not Dumping Executables, Supported Platforms, Technical Notes
@section Dumping Executables
@cindex Dumping
Creating standalone executables is orthogonal to @clon{}. @clon{} is
just a library that you might want to use, and in fact, it is also
possible to use it without dumping executables at all (@pxref{Not
Dumping Executables}).

@findex exit
@findex dump
Unfortunately, there is no standard way to dump executables from Lisp.
We're entering the portability mine field here. @clon{}, however, wants
to help. We've already seen that it provides utility wrappers like
@code{exit} and @code{dump} to make your life easier (I mean, more
portable) in @ref{Quick Start}. If you're not interested in portability
or if you prefer to do it your own way, you don't @emph{need} to use
those wrappers. If you do, however, please read on.

Continuing on the quickstart example, the table below provides
ready-to-use @cmdline{} samples for dumping the program with the
compilers currently supported. Remember that they work in conjunction
with the somewhat rudimentary @code{dump} macro mentionned above.

@table @strong
@item SBCL
@code{CC=gcc sbcl --script quickstart.lisp}@*
The @code{CC=gcc} bit is needed for the @code{sb-grovel} contrib module
that @clon{} uses (unless restricted mode is requested).
@item CMUCL
@code{lisp -noinit -nositeinit -load quickstart.lisp}
@item CCL
@code{ccl --no-init --load quickstart.lisp}
@item ECL
ECL doesn't work like the other Lisp compilers. In particular, creating
an executable does not involve dumping a Lisp image, but compiling the
source into separate object files and then linking them. The consequence
is that there is no simple @cmdline{} recipe to show here. Instead, you
might want to look at the file @file{demos/dump.lisp} in the
distribution for an example. Note that this file doesn't really attempt
to dump the whole application. Only the actual example file is dumped.

Because the dumping scheme is different with ECL, it is also less
straightforward to write portable code for standalone applications. The
demo programs in the distribution both contain comments that are worth
reading at the top of them.

@findex dump
One specific difference between ECL and the other Lisp compilers is that
it doesn't require you to specify a particular function as the entry
point for your executable, but instead relies on having code to execute
directly at the toplevel of some file. @clon{}'s @code{dump} macro helps
you with this: it normally expands to a compiler-specific function which
saves the current Lisp image, but for ECL, it simply expands to the
``main'' function call, hence consituting the entry point to the code
that ECL needs.
@item CLISP
@code{CC=gcc clisp -norc -i quickstart.lisp}@*
The @code{CC=gcc} bit lets you choose your preferred C compiler for
@code{cffi}. Please note that executables dumped (the @clon{} way) by
CLISP still understand lisp-specific @cmdline{} options when they are
prefixed with @code{--clisp-}, so you should obviously avoid defining
options by those names.
@item ABCL
ABCL is a totally different beast because it's a Java-based @cl{}
implementation. Most notably, you don't create standalone executables in
Java, so the normal way of running ABCL is by telling it to load some
lisp code. If you want to run the quickstart program in the usual way,
you will typically type this:
@verbatim
abcl --noinform --noinit --nosystem --load quickstart.lisp
@end verbatim
Note that for this to work, the @code{dump} macro expands to the
``main'' function call for ABCL, just as for ECL.

There's more to it than that though. It is possible to get closer to
standalone executables with ABCL by 1/ providing your whole application
in a @code{jar} file directly, and 2/ overriding ABCL's entry point by
providing your own interpreter which runs your main function
automatically. I have described this process in more details in the
following blog entry:
@uref{http://www.didierverna.com/sciblog/index.php?post/2011/01/22/Towards-ABCL-Standalone-Executables}.

@coindex{dump}@c
@clon{} helps you to do this to some extend. If the @code{:dump}
configuration option is set (@pxref{Configuration}), then the
@code{dump} macro doesn't expand to a call to the ``main'' function, but
instead dumps a Java file containing an alternate ABCL interpreter that
you can compile and add to the original ABCL @code{jar} file, along with
@file{quickstart.lisp}. If you want more details on this, you will need
to look at the @file{Makefile} in the @code{demo} directory and also at
the file @file{Makefile.inc} at the toplevel.
@item Allegro
@findex dumplisp
Dumping a complete application with Allegro is complicated, but more
importantly only possible in the Enterprise edition. Because of that,
@clon{}'s dumping facility only makes use of the @code{dumplisp} feature
which just dumps a Lisp image. You can perform this operation with a
@cmdline{} such as @samp{alisp -qq -L quickstart.lisp}. The Makefile
infrastructure in the @file{demo} directory also creates shell script
wrappers around this image to simplify their use.
@item Lispworks
@code{lispworks -init - -siteinit - -load quickstart.lisp}@*
Please note that dumping a complete application with Lispworks is only
possible in the Professional or Enterprise editions.
@end table


@c -----------------------
@c Not Dumping Executables
@c -----------------------
@node Not Dumping Executables, , Dumping Executables, Technical Notes
@section Not Dumping Executables
Although @cmdline{} processing really makes sense for standalone
executables, you may want to preserve interactivity with your
application during the development phase, for instance for testing or
debugging purposes.

It is possible to use @clon{} interactively, that is, within a regular
Lisp REPL, without dumping anything. First of all, we have already seen
that it is possible to use a virtual @cmdline{} (@pxref{Using Different
Command-Lines}). You can also use @clon{} interactively with the actual
Lisp invocation's @cmdline{}, although a word of advice is in order
here.

@findex cmdline
@findex dump
As you might expect, the problem in that situation lies in the way the
different Lisp implementations treat their own @cmdline{}. Guess what,
it's a mess. When you dump an executable the @clon{} way, the
@code{cmdline} function will always contain user options only (the
@code{dump} macro instructs the compilers to @emph{not} process the
@cmdline{} at all). When you use @clon{} interactively and mix
compiler-specific options with application ones when invoking your Lisp
environment, the situation is as follows:

@table @strong
@item SBCL
SBCL processes its own options and leaves the others unprocessed on the
@cmdline{}. This means that as long as there is no overlap between
SBCL's options and yours, you can just put them all together on the
@cmdline{}. In case of overlap however, you need to separate SBCL's
options from yours with a call to @code{--end-toplevel-options} (that's
an SBCL specific option separator).
@item CMUCL
@cindex Command-Line, remainder
@cindex Remainder, of command-line
CMUCL processes its own options, issues a warning about the options it
doesn't know about, but in any case, it eats the whole @cmdline{}.
Consequently, if you want to provide options to your application, you
need to put them after a @code{--} separator. Note that you can still
use a second such separator to provide @clon{} with both some options
and a remainder (@pxenduserref{Option Separator}).
@item CCL
@itemx ECL
@itemx CLISP
CCL, ECL and CLISP all process their own options but will abort on
unknown ones. Consequently, if you want to provide options to your
application, you need to put them after a @code{--} separator. Note that
you can still use a second such separator to provide @clon{} with both
some options and a remainder (@pxenduserref{Option Separator}).
@item ABCL
ABCL processes its own options and leaves the others unprocessed on the
@cmdline{}. This means that as long as there is no overlap between
ABCL's options and yours, you can just put them all together on the
@cmdline{}. In case of overlap however, you need to separate ABCL's
options from yours with a @code{--} separator. Note that you can still
use a second such separator to provide @clon{} with both some options
and a remainder (@pxenduserref{Option Separator}).
@item Allegro
Allegro processes its own options, issues only a warning about options
it doesn't know of, and leaves anything after a @code{--} alone.
Consequently, if you want to provide options to your application, you
need to put them after a @code{--} separator. Note that you can still
use a second such separator to provide @clon{} with both some options
and a remainder (@pxenduserref{Option Separator}).
@item Lispworks
Lispworks processes its own options and ignores the other ones, but
always leaves everything on the command-line. It does not currently
support @code{--} as an option separator either. Consequently, if you
want to provide options to your application, you need to put them after
a @code{--} separator, although you @emph{will} get into trouble if any
option there is recognized by Lispworks itself. Note that you can still
use a second such separator to provide @clon{} with both some options
and a remainder (@pxenduserref{Option Separator}).
@end table



@c ====================================================================
@c API Quick Reference
@c ====================================================================
@node API Quick Reference, Indexes, Technical Notes, Top
@appendix API Quick Reference

@menu
* Utilities::                   Miscellaneous stuff
* Initialization Phase API::    Synopsis, items and context creation
* Runtime Phase API::           Option retrieval and help formatting
* Extension API::               New option types
* Versioning API::              Release identification
@end menu


@c ---------
@c Utilities
@c ---------
@node Utilities, Initialization Phase API, API Quick Reference, API Quick Reference
@section Utilities

@defmac dump NAME FUNCTION
See @ref{Quick Start}.
@end defmac

@defun exit &optional (STATUS 0)
See @ref{Quick Start}.
@end defun

@cindex Command-Line
@defun cmdline
See @ref{Option Retrieval}.
@end defun

@cindex Package, nicknames
@defun nickname-package &optional NICKNAME
See @ref{Quick Start}.
@end defun


@c ------------------------
@c Initialization Phase API
@c ------------------------
@node Initialization Phase API, Runtime Phase API, Utilities, API Quick Reference
@section Initialization Phase API

@defun make-text &key CONTENTS HIDDEN
@cfsubindex{make-text}
@cfiaindex{make-text,:contents}
@cfiaindex{make-text,:hidden}
@defunx make-@var{OPTION} :INITARG INITVAL@dots{}
@cfsubindex{make-@var{OPTION}}
@cfindex make-flag
@cfindex make-stropt
@cfindex make-lispobj
@cfindex make-enum
@cfindex make-path
@cfindex make-switch
@cfindex make-xswitch
@defunx make-group &key HEADER HIDDEN ITEM
@cfsubindex{make-group}
@cfiaindex{make-group,:header}
@cfiaindex{make-group,:hidden}
@cfiaindex{make-group,:item}
@defunx make-synopsis &key POSTFIX ITEM (MAKE-DEFAULT t)
@cfsubindex{make-synopsis}
@cfiaindex{make-synopsis,:postfix}
@cfiaindex{make-synopsis,:item}
@cfiaindex{make-synopsis,:make-default}
See @ref{Constructors} and @ref{Using Different Synopsis}.
@end defun

@defmac defgroup (&key HEADER HIDDEN) &body FORMS
@foindex{defgroup,:header}
@foindex{defgroup,:hidden}
@xref{Group Definition}.
@end defmac

@defmac defsynopsis (&key POSTFIX MAKE-DEFAULT) &body FORMS
@foindex{defsynopsis,:postfix}
@foindex{defsynopsis,:make-default}
@fiindex{defsynopsis,text}
@fiindex{defsynopsis,options}
@fiindex{defsynopsis,group}
See @ref{Synopsis Definition} and @ref{Using Different Synopsis}.
@end defmac

@defopt *synopsis*
@xref{Using Different Synopsis}.
@end defopt

@defun make-context &key (SYNOPSIS *synopsis*) CMDLINE @
(MAKE-CURRENT t)
@cfsubindex{make-context}
@cfiaindex{make-context,:synopsis}
@cfiaindex{make-context,:cmdline}
@cfiaindex{make-context,:make-current}
@xref{Context Creation}, @ref{Using Different Synopsis} and @ref{Using
Different Command-Lines}.
@end defun



@c -----------------
@c Runtime Phase API
@c -----------------
@node Runtime Phase API, Extension API, Initialization Phase API, API Quick Reference
@section Runtime Phase API

@defopt *context*
@xref{Using Multiple Contexts}.
@end defopt

@defun with-context CONTEXT &body BODY
@xref{Using Multiple Contexts}.
@end defun

@defun progname &key (CONTEXT *context*)
@fkindex{progname,:context}
See @ref{Contextual Information} and @ref{Using Multiple Contexts}.
@end defun

@defun remainder &key (CONTEXT *context*)
@fkindex{remainder,:context}
See @ref{Contextual Information} and @ref{Using Multiple Contexts}.
@end defun

@defun cmdline-options-p &key (CONTEXT *context*)
@fkindex{cmdline-options-p,:context}
See @ref{Command-Line Polling} and @ref{Using Multiple Contexts}.
@end defun

@defun cmdline-p &key (CONTEXT *context*)
@fkindex{cmdline-p,:context}
See @ref{Command-Line Polling} and @ref{Using Multiple Contexts}.
@end defun

@defun getopt &key (CONTEXT *context*) SHORT-NAME LONG-NAME @
OPTION
@fkindex{getopt,:context}
@fkindex{getopt,:short-name}
@fkindex{getopt,:long-name}
@fkindex{getopt,:option}
@vindex *context*
See @ref{Explicit Retrieval} and @ref{Using Multiple Contexts}.
@end defun

@defun getopt-cmdline &key (CONTEXT *context*)
@fkindex{getopt-cmdline,:context}
@vindex *context*
See @ref{Sequential Retrieval} and @ref{Using Multiple Contexts}.
@end defun

@defmac multiple-value-getopt-cmdline (OPTION NAME VALUE SOURCE &key CONTEXT) @
&body BODY
@defmacx do-cmdline-options (OPTION NAME VALUE SOURCE &key CONTEXT) @
&body BODY
@foindex{multiple-value-getopt-cmdline,:context}
@foindex{do-cmdline-options,:context}
See @ref{Sequential Retrieval} and @ref{Using Multiple Contexts}.
@end defmac

@deffn Reader short-name OPTION
@rfsubindex{short-name}
@deffnx Reader long-name OPTION
@rfsubindex long-name
@xref{Sequential Retrieval}.
@end deffn

@defun help &key (CONTEXT *context*) @
(ITEM (synopsis context)) @
(OUTPUT-STREAM *standard-output*) @
(SEARCH-PATH (search-path context)) @
(THEME (theme context)) @
(LINE-WIDTH (line-width context)) @
(HIGHLIGHT (highlight context)))
@fkindex{help,:context}
@fkindex{help,:item}
@fkindex{help,:output-stream}
@fkindex{help,:theme}
@fkindex{help,:search-path}
@fkindex{help,:line-width}
@fkindex{help,:highlight}
@vindex *context*
@vindex *standard-output*
@xref{Help}, @ref{Using Multiple Contexts} and @ref{Programmatic Help
Strings}.
@end defun


@c -------------
@c Extension API
@c -------------
@node Extension API, Versioning API, Runtime Phase API, API Quick Reference
@section Extension API

@defmac defoption CLASS SUPERCLASSES SLOTS &rest OPTIONS
@pxref{New Option Classes}
@end defmac

@deffn {Generic Function} check OPTION VALUE
@gfsubindex{check}
@xref{Value Check Protocol}.
@end deffn

@deftp {Error Condition} option-error OPTION
@ecsubindex{option-error}
@ecsindex{option-error,option}
@deftpx {Error Condition} invalid-value VALUE COMMENT
@ecsubindex{invalid-value}
@ecsindex{invalid-value,value}
@ecsindex{invalid-value,comment}
@xref{Value Check Protocol}.
@end deftp

@deffn {Generic Function} convert OPTION ARGUMENT
@gfsubindex{convert}
@xref{Argument Conversion Protocol}.
@end deffn

@deftp {Error Condition} invalid-argument ARGUMENT COMMENT
@ecsubindex{invalid-argument}
@ecsindex{invalid-argument,argument}
@ecsindex{invalid-argument,comment}
@xref{Argument Conversion Protocol}.
@end deftp

@deffn {Generic Function} stringify OPTION VALUE
@gfsubindex{stringify}
@xref{Value Stringification Protocol}.
@end deffn


@c --------------
@c Versioning API
@c --------------
@node Versioning API, , Extension API, API Quick Reference
@section Versioning API

@defun version &optional (TYPE :number)
@xref{Version Numbering}.
@end defun

@defvr Constant +release-major-level+
@defvrx Constant +release-minor-level+
@defvrx Constant +release-status+
@defvrx Constant +release-status-level+
@defvrx Constant +release-name+
@xref{Version Numbering}.
@end defvr



@c ====================================================================
@c Indexes
@c ====================================================================
@node Indexes, Acknowledgments, API Quick Reference, Top
@appendix Indexes

@menu
* Concept Index::       Well, the concept index
* Function Index::      Well, the function index
* Variable Index::      Well, the variable index
* Data Type Index::     Well, the data type index
@end menu


@c --------------
@c Concept Index
@c --------------
@node Concept Index, Function Index, Indexes, Indexes
@section Concepts
@printindex cp
@page


@c --------------
@c Function Index
@c --------------
@node Function Index, Variable Index, Concept Index, Indexes
@section Functions
@printindex fn
@page


@c --------------
@c Variable Index
@c --------------
@node Variable Index, Data Type Index, Function Index, Indexes
@section Variables
@printindex vr
@page


@c ---------------
@c Data Type Index
@c ---------------
@node Data Type Index, , Variable Index, Indexes
@section Data Types
@printindex tp



@c ====================================================================
@c Acknowledgments
@c ====================================================================
@node Acknowledgments, , Indexes, Top
@appendix Acknowledgments
The following people have contributed bug reports or fixes, suggestions,
compiler support or any other kind of help. You have my gratitude!

@multitable @columnfractions .99
Alessio Stalla@*
Antony @emph{something}@*
Erik Huelsmann@*
Erik Winkels@*
François-René Rideau@*
James Wright
@end multitable


@bye

@c  LocalWords:  Clon clon cmdline Clonification tty emph CmdLine clonified SGR
@c  LocalWords:  clonfiscated clonistified clonificated clonificationated samp
@c  LocalWords:  cindex subsubsection pxref Didier Nuker postfix Runtime cth
@c  LocalWords:  cartouche toplevel prepended IEC

@c user.texi ends here