third_party/codesighs/msdump2symdb.c

   1 /* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
   2  *
   3  * ***** BEGIN LICENSE BLOCK *****
   4  * Version: MPL 1.1/GPL 2.0/LGPL 2.1
   5  *
   6  * The contents of this file are subject to the Mozilla Public License Version
   7  * 1.1 (the "License"); you may not use this file except in compliance with
   8  * the License. You may obtain a copy of the License at
   9  * http://www.mozilla.org/MPL/
  10  *
  11  * Software distributed under the License is distributed on an "AS IS" basis,
  12  * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
  13  * for the specific language governing rights and limitations under the
  14  * License.
  15  *
  16  * The Original Code is msdump2symdb.c code, released
  17  * Jan 16, 2003.
  18  *
  19  * The Initial Developer of the Original Code is
  20  * Netscape Communications Corporation.
  21  * Portions created by the Initial Developer are Copyright (C) 2002
  22  * the Initial Developer. All Rights Reserved.
  23  *
  24  * Contributor(s):
  25  *   Garrett Arch Blythe, 16-January-2003
  26  *
  27  * Alternatively, the contents of this file may be used under the terms of
  28  * either the GNU General Public License Version 2 or later (the "GPL"), or
  29  * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
  30  * in which case the provisions of the GPL or the LGPL are applicable instead
  31  * of those above. If you wish to allow use of your version of this file only
  32  * under the terms of either the GPL or the LGPL, and not to allow others to
  33  * use your version of this file under the terms of the MPL, indicate your
  34  * decision by deleting the provisions above and replace them with the notice
  35  * and other provisions required by the GPL or the LGPL. If you do not delete
  36  * the provisions above, a recipient may use your version of this file under
  37  * the terms of any one of the MPL, the GPL or the LGPL.
  38  *
  39  * ***** END LICENSE BLOCK ***** */
  40
  41 #include <stdio.h>
  42 #include <stdlib.h>
  43 #include <string.h>
  44 #include <time.h>
  45 #include <ctype.h>
  46 #include <errno.h>
  47
  48 #define ERROR_REPORT(num, val, msg)   fprintf(stderr, "error(%d):\t\"%s\"\t%s\n", (num), (val), (msg));
  49 #define CLEANUP(ptr)    do { if(NULL != ptr) { free(ptr); ptr = NULL; } } while(0)
  50
  51
  52 typedef struct __struct_Options
  53 /*
  54 **  Options to control how we perform.
  55 **
  56 **  mProgramName    Used in help text.
  57 **  mInput          File to read for input.
  58 **                  Default is stdin.
  59 **  mInputName      Name of the file.
  60 **  mOutput         Output file, append.
  61 **                  Default is stdout.
  62 **  mOutputName     Name of the file.
  63 **  mHelp           Whether or not help should be shown.
  64 */
  65 {
  66     const char* mProgramName;
  67     FILE* mInput;
  68     char* mInputName;
  69     FILE* mOutput;
  70     char* mOutputName;
  71     int mHelp;
  72 }
  73 Options;
  74
  75
  76 typedef struct __struct_Switch
  77 /*
  78 **  Command line options.
  79 */
  80 {
  81     const char* mLongName;
  82     const char* mShortName;
  83     int mHasValue;
  84     const char* mValue;
  85     const char* mDescription;
  86 }
  87 Switch;
  88
  89 #define DESC_NEWLINE "\n\t\t"
  90
  91 static Switch gInputSwitch = {"--input", "-i", 1, NULL, "Specify input file." DESC_NEWLINE "stdin is default."};
  92 static Switch gOutputSwitch = {"--output", "-o", 1, NULL, "Specify output file." DESC_NEWLINE "Appends if file exists." DESC_NEWLINE "stdout is default."};
  93 static Switch gHelpSwitch = {"--help", "-h", 0, NULL, "Information on usage."};
  94
  95 static Switch* gSwitches[] = {
  96         &gInputSwitch,
  97         &gOutputSwitch,
  98         &gHelpSwitch
  99 };
 100
 101
 102 typedef struct __struct_MSDump_Symbol
 103 /*
 104 **  Struct to hold infomration on a symbol.
 105 **
 106 **  mSize               Size of the symbol once all work is complete.
 107 **  mOffset             Offset of the symbol in the section.
 108 **  mName               Symbolic name.
 109 */
 110 {
 111     unsigned    mSize;
 112     unsigned    mOffset;
 113     char*       mName;
 114 }
 115 MSDump_Symbol;
 116
 117
 118 typedef struct __struct_MSDump_Section
 119 /*
 120 **  Struct for holding information on a section.
 121 **
 122 **  mLength             Length of the section in bytes.
 123 **  mUsed               Number of bytes used in the section thus far.
 124 **                      Should eventually match mLength after work is done.
 125 **  mType               Type of section, as string (.data, .text, et. al.)
 126 **  mSymbols            Symbols found inside the section.
 127 **  mSymbolCount        Number of symbols in array.
 128 */
 129 {
 130     unsigned            mLength;
 131     unsigned            mUsed;
 132     char*               mType;
 133
 134     MSDump_Symbol*      mSymbols;
 135     unsigned            mSymbolCount;
 136 }
 137 MSDump_Section;
 138
 139
 140 typedef struct __struct_MSDump_Object
 141 /*
 142 **  Struct for holding object's data.
 143 */
 144 {
 145     char*   mObject;
 146
 147     MSDump_Section*     mSections;
 148     unsigned            mSectionCount;
 149 }
 150 MSDump_Object;
 151
 152
 153 typedef struct __struct_MSDump_ReadState
 154 /*
 155 **  State flags while reading the input gives us hints on what to do.
 156 **
 157 **  mSkipLines                  Number of lines to skip without parsing.
 158 **  mSectionDetails             Section information next, like line length.
 159 **  mCurrentObject              Object file we are dealing with.
 160 */
 161 {
 162     unsigned            mSkipLines;
 163     unsigned            mSectionDetails;
 164     MSDump_Object*      mCurrentObject;
 165 }
 166 MSDump_ReadState;
 167
 168
 169 typedef struct __struct_MSDump_Container
 170 /*
 171 **  Umbrella container for all data encountered.
 172 */
 173 {
 174     MSDump_ReadState    mReadState;
 175
 176     MSDump_Object*      mObjects;
 177     unsigned            mObjectCount;
 178 }
 179 MSDump_Container;
 180
 181
 182 void trimWhite(char* inString)
 183 /*
 184 **  Remove any whitespace from the end of the string.
 185 */
 186 {
 187     int len = strlen(inString);
 188
 189     while(len)
 190     {
 191         len--;
 192
 193         if(isspace(*(inString + len)))
 194         {
 195             *(inString + len) = '\0';
 196         }
 197         else
 198         {
 199             break;
 200         }
 201     }
 202 }
 203
 204
 205 const char* skipWhite(const char* inString)
 206 /*
 207 **  Return pointer to first non white space character.
 208 */
 209 {
 210     const char* retval = inString;
 211
 212     while('\0' != *retval && isspace(*retval))
 213     {
 214         retval++;
 215     }
 216
 217     return retval;
 218 }
 219
 220
 221 const char* skipNonWhite(const char* inString)
 222 /*
 223 **  Return pointer to first white space character.
 224 */
 225 {
 226     const char* retval = inString;
 227
 228     while('\0' != *retval && !isspace(*retval))
 229     {
 230         retval++;
 231     }
 232
 233     return retval;
 234 }
 235
 236
 237 void slash2bs(char* inString)
 238 /*
 239 **  Change any forward slash to a backslash.
 240 */
 241 {
 242     char* slash = inString;
 243
 244     while(NULL != (slash = strchr(slash, '/')))
 245     {
 246         *slash = '\\';
 247         slash++;
 248     }
 249 }
 250
 251
 252 const char* skipToArg(const char* inString, unsigned inArgIndex)
 253 /*
 254 **  Return pointer either to the arg or NULL.
 255 **  1 indexed.
 256 */
 257 {
 258     const char* retval = NULL;
 259
 260     while(0 != inArgIndex && '\0' != *inString)
 261     {
 262         inArgIndex--;
 263
 264         inString = skipWhite(inString);
 265         if(0 != inArgIndex)
 266         {
 267             inString = skipNonWhite(inString);
 268         }
 269     }
 270
 271     if('\0' != *inString)
 272     {
 273         retval = inString;
 274     }
 275
 276     return retval;
 277 }
 278
 279
 280 const char* getLastArg(const char* inString)
 281 /*
 282 **  Return pointer to last arg in string.
 283 */
 284 {
 285     const char* retval = NULL;
 286     int length = 0;
 287     int sawString = 0;
 288
 289     length = strlen(inString);
 290     while(0 != length)
 291     {
 292         length--;
 293
 294         if(0 == sawString)
 295         {
 296             if(0 == isspace(inString[length]))
 297             {
 298                 sawString = __LINE__;
 299             }
 300         }
 301         else
 302         {
 303             if(0 != isspace(inString[length]))
 304             {
 305                 retval = inString + length + 1;
 306             }
 307         }
 308     }
 309
 310     return retval;
 311 }
 312
 313
 314 int processLine(Options* inOptions, MSDump_Container* inContainer, const char* inLine)
 315 /*
 316 **  Handle one line at a time.
 317 **  Looking for several different types of lines.
 318 **  Ignore all other lines.
 319 **  The container is the state machine.
 320 **  returns 0 on no error.
 321 */
 322 {
 323     int retval = 0;
 324
 325     /*
 326     **  Check to see if we were expecting section details.
 327     */
 328     if(0 != inContainer->mReadState.mSectionDetails)
 329     {
 330         const char* length = NULL;
 331         unsigned sectionIndex = 0;
 332
 333         /*
 334         **  Detail is a 1 based index....
 335         **  Reset.
 336         */
 337         sectionIndex = inContainer->mReadState.mSectionDetails - 1;
 338         inContainer->mReadState.mSectionDetails = 0;
 339
 340         if(0 == strncmp("    Section length", inLine, 18))
 341         {
 342             const char* sectionLength = NULL;
 343             unsigned numericLength = 0;
 344             char* endScan = NULL;
 345
 346             sectionLength = skipWhite(inLine + 18);
 347
 348             errno = 0;
 349             numericLength = strtoul(sectionLength, &endScan, 16);
 350             if(0 == errno && endScan != sectionLength)
 351             {
 352                 inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mLength = numericLength;
 353             }
 354             else
 355             {
 356                 retval = __LINE__;
 357                 ERROR_REPORT(retval, inLine, "Cannot scan for section length.");
 358             }
 359         }
 360         else
 361         {
 362             retval = __LINE__;
 363             ERROR_REPORT(retval, inLine, "Cannot parse section line.");
 364         }
 365     }
 366     /*
 367     **  Check for switching object file symbols.
 368     */
 369     else if(0 == strncmp("Dump of file ", inLine, 13))
 370     {
 371         const char* dupMe = inLine + 13;
 372         char* dup = NULL;
 373
 374         dup = strdup(dupMe);
 375         if(NULL != dup)
 376         {
 377             void* growth = NULL;
 378
 379             trimWhite(dup);
 380             slash2bs(dup);
 381
 382
 383             growth = realloc(inContainer->mObjects, (inContainer->mObjectCount + 1) * sizeof(MSDump_Object));
 384             if(NULL != growth)
 385             {
 386                 unsigned int index = inContainer->mObjectCount;
 387
 388                 inContainer->mObjectCount++;
 389                 inContainer->mObjects = growth;
 390                 memset(inContainer->mObjects + index, 0, sizeof(MSDump_Object));
 391
 392                 inContainer->mObjects[index].mObject = dup;
 393
 394                 /*
 395                 **  Reset the read state for this new object.
 396                 */
 397                 memset(&inContainer->mReadState, 0, sizeof(MSDump_ReadState));
 398
 399                 /*
 400                 **  Record our current object file.
 401                 */
 402                 inContainer->mReadState.mCurrentObject = inContainer->mObjects + index;
 403
 404                 /*
 405                 **  We can skip a few lines.
 406                 */
 407                 inContainer->mReadState.mSkipLines = 4;
 408             }
 409             else
 410             {
 411                 retval = __LINE__;
 412                 ERROR_REPORT(retval, dup, "Unable to grow object array.");
 413                 free(dup);
 414             }
 415         }
 416         else
 417         {
 418             retval = __LINE__;
 419             ERROR_REPORT(retval, dupMe, "Unable to copy string.");
 420
 421         }
 422     }
 423     /*
 424     **  Check for a symbol dump or a section header.
 425     */
 426     else if(isxdigit(*inLine) && isxdigit(*(inLine + 1)) && isxdigit(*(inLine + 2)))
 427     {
 428         const char* sectionString = NULL;
 429
 430         /*
 431         **  Determine the section for this line.
 432         **  Ignore DEBUG sections.
 433         */
 434         sectionString = skipToArg(inLine, 3);
 435         if(NULL != sectionString)
 436         {
 437             if(0 != strncmp(sectionString, "DEBUG", 5) && 0 != strncmp(sectionString, "ABS", 3) && 0 != strncmp(sectionString, "UNDEF", 5))
 438             {
 439                 /*
 440                 **  MUST start with "SECT"
 441                 */
 442                 if(0 == strncmp(sectionString, "SECT", 4))
 443                 {
 444                     unsigned sectionIndex1 = 0;
 445
 446                     char *endScan = NULL;
 447
 448                     sectionString += 4;
 449
 450                     /*
 451                     **  Convert the remaining string to an index.
 452                     **  It will be 1 based.
 453                     */
 454                     errno = 0;
 455                     sectionIndex1 = strtoul(sectionString, &endScan, 16);
 456                     if(0 == errno && endScan != sectionString && 0 != sectionIndex1)
 457                     {
 458                         unsigned sectionIndex = sectionIndex1 - 1;
 459
 460                         /*
 461                         **  Is this a new section? Assumed to be ascending.
 462                         **  Or is this a symbol in the section?
 463                         */
 464                         if(sectionIndex1 > inContainer->mReadState.mCurrentObject->mSectionCount)
 465                         {
 466                             const char* typeArg = NULL;
 467
 468                             /*
 469                             **  New Section, figure out the type.
 470                             */
 471                             typeArg = skipToArg(sectionString, 5);
 472                             if(NULL != typeArg)
 473                             {
 474                                 char* typeDup = NULL;
 475
 476                                 /*
 477                                 **  Skip the leading period before duping.
 478                                 */
 479                                 if('.' == *typeArg)
 480                                 {
 481                                     typeArg++;
 482                                 }
 483                                 typeDup = strdup(typeArg);
 484
 485                                 if(NULL != typeDup)
 486                                 {
 487                                     void* moved = NULL;
 488                                     char* nonWhite = NULL;
 489
 490                                     /*
 491                                     **  Terminate the duplicate after the section type.
 492                                     */
 493                                     nonWhite = (char*)skipNonWhite(typeDup);
 494                                     if(NULL != nonWhite)
 495                                     {
 496                                         *nonWhite = '\0';
 497                                     }
 498
 499                                     /*
 500                                     **  Create more space for the section in the object...
 501                                     */
 502                                     moved = realloc(inContainer->mReadState.mCurrentObject->mSections, sizeof(MSDump_Section) * sectionIndex1);
 503                                     if(NULL != moved)
 504                                     {
 505                                         unsigned oldCount = inContainer->mReadState.mCurrentObject->mSectionCount;
 506
 507                                         inContainer->mReadState.mCurrentObject->mSections = (MSDump_Section*)moved;
 508                                         inContainer->mReadState.mCurrentObject->mSectionCount = sectionIndex1;
 509                                         memset(&inContainer->mReadState.mCurrentObject->mSections[oldCount], 0, sizeof(MSDump_Section) * (sectionIndex1 - oldCount));
 510
 511                                         /*
 512                                         **  Other section details.
 513                                         */
 514                                         inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mType = typeDup;
 515
 516
 517                                         /*
 518                                         **  Mark it so that we look for the length on the next line.
 519                                         **  This happens on next entry into the read state.
 520                                         */
 521                                         inContainer->mReadState.mSectionDetails = sectionIndex1;
 522                                     }
 523                                     else
 524                                     {
 525                                         retval = __LINE__;
 526                                         ERROR_REPORT(retval, inLine, "Unable to grow for new section.");
 527                                         free(typeDup);
 528                                     }
 529                                 }
 530                                 else
 531                                 {
 532                                     retval = __LINE__;
 533                                     ERROR_REPORT(retval, typeArg, "Unable to duplicate type.");
 534                                 }
 535                             }
 536                             else
 537                             {
 538                                 retval = __LINE__;
 539                                 ERROR_REPORT(retval, inLine, "Unable to determine section type.");
 540                             }
 541
 542                         }
 543                         else
 544                         {
 545                             const char* offsetArg = NULL;
 546                             const char* classArg = NULL;
 547                             unsigned classWords = 1;
 548                             const char* symbolArg = NULL;
 549
 550                             /*
 551                             **  This is an section we've seen before, and must list a symbol.
 552                             **  Figure out the things we want to know about the symbol, e.g. size.
 553                             **  We will ignore particular classes of symbols.
 554                             */
 555
 556                             offsetArg = skipToArg(inLine, 2);
 557
 558                             classArg = skipToArg(offsetArg, 4);
 559                             if(0 == strncmp(classArg, "()", 2))
 560                             {
 561                                 classArg = skipToArg(classArg, 2);
 562                             }
 563                             if(0 == strncmp(classArg, ".bf or.ef", 9))
 564                             {
 565                                 classWords = 2;
 566                             }
 567
 568                             symbolArg = skipToArg(classArg, 3 + (classWords - 1));
 569
 570                             /*
 571                             **  Skip particular lines/items.
 572                             */
 573                             if(
 574                                 0 != strncmp(classArg, "Label", 5) &&
 575                                 0 != strncmp(symbolArg, ".bf", 3) &&
 576                                 0 != strncmp(symbolArg, ".lf", 3) &&
 577                                 0 != strncmp(symbolArg, ".ef", 3)
 578                                 )
 579                             {
 580                                 char* endOffsetArg = NULL;
 581                                 unsigned offset = 0;
 582
 583                                 /*
 584                                 ** Convert the offset to something meaninful (size).
 585                                 */
 586                                 errno = 0;
 587                                 offset = strtoul(offsetArg, &endOffsetArg, 16);
 588                                 if(0 == errno && endOffsetArg != offsetArg)
 589                                 {
 590                                     void* moved = NULL;
 591
 592                                     /*
 593                                     **  Increase the size of the symbol array in the section.
 594                                     **  Assumed symbols are unique within each section.
 595                                     */
 596                                     moved = realloc(inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbols, sizeof(MSDump_Symbol) * (inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbolCount + 1));
 597                                     if(NULL != moved)
 598                                     {
 599                                         unsigned symIndex = 0;
 600
 601                                         /*
 602                                         **  Record symbol details.
 603                                         **  Assumed symbols are encountered in order for their section (size calc depends on it).
 604                                         */
 605                                         symIndex = inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbolCount;
 606                                         inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbolCount++;
 607                                         inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbols = (MSDump_Symbol*)moved;
 608                                         memset(&inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbols[symIndex], 0, sizeof(MSDump_Symbol));
 609
 610                                         inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbols[symIndex].mOffset = offset;
 611
 612                                         /*
 613                                         **  We could allocate smarter here if it ever mattered.
 614                                         */
 615                                         inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbols[symIndex].mName = strdup(symbolArg);
 616                                         if(NULL != inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbols[symIndex].mName)
 617                                         {
 618                                             char* trim = NULL;
 619
 620                                             trim = (char*)skipNonWhite(inContainer->mReadState.mCurrentObject->mSections[sectionIndex].mSymbols[symIndex].mName);
 621                                             if(NULL != trim)
 622                                             {
 623                                                 *trim = '\0';
 624                                             }
 625                                         }
 626                                         else
 627                                         {
 628                                             retval = __LINE__;
 629                                             ERROR_REPORT(retval, inLine, "Unable to duplicate symbol name.");
 630                                         }
 631                                     }
 632                                     else
 633                                     {
 634                                         retval = __LINE__;
 635                                         ERROR_REPORT(retval, inLine, "Unable to grow symbol array for section.");
 636                                     }
 637                                 }
 638                                 else
 639                                 {
 640                                     retval = __LINE__;
 641                                     ERROR_REPORT(retval, inLine, "Unable to convert offset to a number.");
 642                                 }
 643                             }
 644                         }
 645                     }
 646                     else
 647                     {
 648                         retval = __LINE__;
 649                         ERROR_REPORT(retval, inLine, "Unable to determine section index.");
 650                     }
 651                 }
 652                 else
 653                 {
 654                     retval = __LINE__;
 655                     ERROR_REPORT(retval, inLine, "No match for section prefix.");
 656                 }
 657             }
 658         }
 659         else
 660         {
 661             retval = __LINE__;
 662             ERROR_REPORT(retval, inLine, "Unable to scan for section.");
 663         }
 664     }
 665
 666     return retval;
 667 }
 668
 669
 670 void dumpCleanup(MSDump_Container* inContainer)
 671 /*
 672 **  Attempt to be nice and free up what we have allocated.
 673 */
 674 {
 675     unsigned objectLoop = 0;
 676     unsigned sectionLoop = 0;
 677     unsigned symbolLoop = 0;
 678
 679     for(objectLoop = 0; objectLoop < inContainer->mObjectCount; objectLoop++)
 680     {
 681         for(sectionLoop = 0; sectionLoop < inContainer->mObjects[objectLoop].mSectionCount; sectionLoop++)
 682         {
 683             for(symbolLoop = 0; symbolLoop < inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbolCount; symbolLoop++)
 684             {
 685                 CLEANUP(inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbols[symbolLoop].mName);
 686             }
 687             inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbolCount = 0;
 688             CLEANUP(inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbols);
 689             CLEANUP(inContainer->mObjects[objectLoop].mSections[sectionLoop].mType);
 690         }
 691         inContainer->mObjects[objectLoop].mSectionCount = 0;
 692         CLEANUP(inContainer->mObjects[objectLoop].mSections);
 693     }
 694     CLEANUP(inContainer->mObjects);
 695     inContainer->mObjectCount = 0;
 696 }
 697
 698
 699 int qsortSymOffset(const void* in1, const void* in2)
 700 /*
 701 **  qsort callback to sort the symbols by their offset.
 702 */
 703 {
 704     MSDump_Symbol* sym1 = (MSDump_Symbol*)in1;
 705     MSDump_Symbol* sym2 = (MSDump_Symbol*)in2;
 706     int retval = 0;
 707
 708     if(sym1->mOffset < sym2->mOffset)
 709     {
 710         retval = 1;
 711     }
 712     else if(sym1->mOffset > sym2->mOffset)
 713     {
 714         retval = -1;
 715     }
 716
 717     return retval;
 718 }
 719
 720
 721 int calcContainer(Options* inOptions, MSDump_Container* inContainer)
 722 /*
 723 **  Resposible for doing any size calculations based on the offsets known.
 724 **  After this calculation, each sections mUsed will match mSize.
 725 **  After this calculation, all symbols should know how big they are.
 726 */
 727 {
 728     int retval = 0;
 729     unsigned objectLoop = 0;
 730     unsigned sectionLoop = 0;
 731     unsigned symbolLoop = 0;
 732
 733
 734     /*
 735     **  Need to sort all symbols by their offsets.
 736     */
 737     for(objectLoop = 0; 0 == retval && objectLoop < inContainer->mObjectCount; objectLoop++)
 738     {
 739         for(sectionLoop = 0; 0 == retval && sectionLoop < inContainer->mObjects[objectLoop].mSectionCount; sectionLoop++)
 740         {
 741             qsort(
 742                 inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbols,
 743                 inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbolCount,
 744                 sizeof(MSDump_Symbol),
 745                 qsortSymOffset
 746                 );
 747         }
 748     }
 749
 750
 751     /*
 752     **  Need to go through all symbols and calculate their size.
 753     */
 754     for(objectLoop = 0; 0 == retval && objectLoop < inContainer->mObjectCount; objectLoop++)
 755     {
 756         for(sectionLoop = 0; 0 == retval && sectionLoop < inContainer->mObjects[objectLoop].mSectionCount; sectionLoop++)
 757         {
 758             for(symbolLoop = 0; 0 == retval && symbolLoop < inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbolCount; symbolLoop++)
 759             {
 760                 inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbols[symbolLoop].mSize =
 761                     inContainer->mObjects[objectLoop].mSections[sectionLoop].mLength -
 762                     inContainer->mObjects[objectLoop].mSections[sectionLoop].mUsed -
 763                     inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbols[symbolLoop].mOffset;
 764
 765                 inContainer->mObjects[objectLoop].mSections[sectionLoop].mUsed +=
 766                     inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbols[symbolLoop].mSize;
 767             }
 768         }
 769     }
 770
 771
 772     return retval;
 773 }
 774
 775
 776 int reportContainer(Options* inOptions, MSDump_Container* inContainer)
 777 /*
 778 **  Display all symbols and their data.
 779 **  We'll use a tsv format.
 780 */
 781 {
 782     int retval = 0;
 783     unsigned objectLoop = 0;
 784     unsigned sectionLoop = 0;
 785     unsigned symbolLoop = 0;
 786     int printRes = 0;
 787
 788     for(objectLoop = 0; 0 == retval && objectLoop < inContainer->mObjectCount; objectLoop++)
 789     {
 790         for(sectionLoop = 0; 0 == retval && sectionLoop < inContainer->mObjects[objectLoop].mSectionCount; sectionLoop++)
 791         {
 792             for(symbolLoop = 0; 0 == retval && symbolLoop < inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbolCount; symbolLoop++)
 793             {
 794                 printRes = fprintf(inOptions->mOutput, "%s\t%s\t%.8X\t%s\n",
 795                     inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbols[symbolLoop].mName,
 796                     inContainer->mObjects[objectLoop].mSections[sectionLoop].mType,
 797                     inContainer->mObjects[objectLoop].mSections[sectionLoop].mSymbols[symbolLoop].mSize,
 798                     inContainer->mObjects[objectLoop].mObject
 799                     );
 800
 801                 if(0 > printRes)
 802                 {
 803                     retval = __LINE__;
 804                     ERROR_REPORT(retval, inOptions->mOutputName, "Unable to write to file.");
 805                 }
 806             }
 807         }
 808     }
 809
 810     return retval;
 811 }
 812
 813
 814 int dump2symdb(Options* inOptions)
 815 /*
 816 **  Convert the input into the output, respecting the options.
 817 **  Returns 0 on success.
 818 */
 819 {
 820     int retval = 0;
 821     char lineBuffer[0x800];
 822     MSDump_Container container;
 823
 824     memset(&container, 0, sizeof(container));
 825
 826     /*
 827     **  Read the file line by line.
 828     */
 829     while(0 == retval && NULL != fgets(lineBuffer, sizeof(lineBuffer), inOptions->mInput))
 830     {
 831         if(0 != container.mReadState.mSkipLines)
 832         {
 833             container.mReadState.mSkipLines--;
 834             continue;
 835         }
 836         retval = processLine(inOptions, &container, lineBuffer);
 837     }
 838
 839     /*
 840     **  Perform whatever calculations desired.
 841     */
 842     if(0 == retval)
 843     {
 844         retval = calcContainer(inOptions, &container);
 845     }
 846
 847     /*
 848     **  Output what we know.
 849     */
 850     if(0 == retval)
 851     {
 852         retval = reportContainer(inOptions, &container);
 853     }
 854
 855     /*
 856     **  Cleanup what we've done.
 857     */
 858     dumpCleanup(&container);
 859
 860     return retval;
 861 }
 862
 863
 864 int initOptions(Options* outOptions, int inArgc, char** inArgv)
 865 /*
 866 **  returns int     0 if successful.
 867 */
 868 {
 869     int retval = 0;
 870     int loop = 0;
 871     int switchLoop = 0;
 872     int match = 0;
 873     const int switchCount = sizeof(gSwitches) / sizeof(gSwitches[0]);
 874     Switch* current = NULL;
 875
 876     /*
 877     **  Set any defaults.
 878     */
 879     memset(outOptions, 0, sizeof(Options));
 880     outOptions->mProgramName = inArgv[0];
 881     outOptions->mInput = stdin;
 882     outOptions->mInputName = strdup("stdin");
 883     outOptions->mOutput = stdout;
 884     outOptions->mOutputName = strdup("stdout");
 885
 886     if(NULL == outOptions->mOutputName || NULL == outOptions->mInputName)
 887     {
 888         retval = __LINE__;
 889         ERROR_REPORT(retval, "stdin/stdout", "Unable to strdup.");
 890     }
 891
 892     /*
 893     **  Go through and attempt to do the right thing.
 894     */
 895     for(loop = 1; loop < inArgc && 0 == retval; loop++)
 896     {
 897         match = 0;
 898         current = NULL;
 899
 900         for(switchLoop = 0; switchLoop < switchCount && 0 == retval; switchLoop++)
 901         {
 902             if(0 == strcmp(gSwitches[switchLoop]->mLongName, inArgv[loop]))
 903             {
 904                 match = __LINE__;
 905             }
 906             else if(0 == strcmp(gSwitches[switchLoop]->mShortName, inArgv[loop]))
 907             {
 908                 match = __LINE__;
 909             }
 910
 911             if(match)
 912             {
 913                 if(gSwitches[switchLoop]->mHasValue)
 914                 {
 915                     /*
 916                     **  Attempt to absorb next option to fullfill value.
 917                     */
 918                     if(loop + 1 < inArgc)
 919                     {
 920                         loop++;
 921
 922                         current = gSwitches[switchLoop];
 923                         current->mValue = inArgv[loop];
 924                     }
 925                 }
 926                 else
 927                 {
 928                     current = gSwitches[switchLoop];
 929                 }
 930
 931                 break;
 932             }
 933         }
 934
 935         if(0 == match)
 936         {
 937             outOptions->mHelp = __LINE__;
 938             retval = __LINE__;
 939             ERROR_REPORT(retval, inArgv[loop], "Unknown command line switch.");
 940         }
 941         else if(NULL == current)
 942         {
 943             outOptions->mHelp = __LINE__;
 944             retval = __LINE__;
 945             ERROR_REPORT(retval, inArgv[loop], "Command line switch requires a value.");
 946         }
 947         else
 948         {
 949             /*
 950             ** Do something based on address/swtich.
 951             */
 952             if(current == &gInputSwitch)
 953             {
 954                 CLEANUP(outOptions->mInputName);
 955                 if(NULL != outOptions->mInput && stdin != outOptions->mInput)
 956                 {
 957                     fclose(outOptions->mInput);
 958                     outOptions->mInput = NULL;
 959                 }
 960
 961                 outOptions->mInput = fopen(current->mValue, "r");
 962                 if(NULL == outOptions->mInput)
 963                 {
 964                     retval = __LINE__;
 965                     ERROR_REPORT(retval, current->mValue, "Unable to open input file.");
 966                 }
 967                 else
 968                 {
 969                     outOptions->mInputName = strdup(current->mValue);
 970                     if(NULL == outOptions->mInputName)
 971                     {
 972                         retval = __LINE__;
 973                         ERROR_REPORT(retval, current->mValue, "Unable to strdup.");
 974                     }
 975                 }
 976             }
 977             else if(current == &gOutputSwitch)
 978             {
 979                 CLEANUP(outOptions->mOutputName);
 980                 if(NULL != outOptions->mOutput && stdout != outOptions->mOutput)
 981                 {
 982                     fclose(outOptions->mOutput);
 983                     outOptions->mOutput = NULL;
 984                 }
 985
 986                 outOptions->mOutput = fopen(current->mValue, "a");
 987                 if(NULL == outOptions->mOutput)
 988                 {
 989                     retval = __LINE__;
 990                     ERROR_REPORT(retval, current->mValue, "Unable to open output file.");
 991                 }
 992                 else
 993                 {
 994                     outOptions->mOutputName = strdup(current->mValue);
 995                     if(NULL == outOptions->mOutputName)
 996                     {
 997                         retval = __LINE__;
 998                         ERROR_REPORT(retval, current->mValue, "Unable to strdup.");
 999                     }
1000                 }
1001             }
1002             else if(current == &gHelpSwitch)
1003             {
1004                 outOptions->mHelp = __LINE__;
1005             }
1006             else
1007             {
1008                 retval = __LINE__;
1009                 ERROR_REPORT(retval, current->mLongName, "No handler for command line switch.");
1010             }
1011         }
1012     }
1013
1014     return retval;
1015 }
1016
1017
1018 void cleanOptions(Options* inOptions)
1019 /*
1020 **  Clean up any open handles.
1021 */
1022 {
1023     CLEANUP(inOptions->mInputName);
1024     if(NULL != inOptions->mInput && stdin != inOptions->mInput)
1025     {
1026         fclose(inOptions->mInput);
1027     }
1028     CLEANUP(inOptions->mOutputName);
1029     if(NULL != inOptions->mOutput && stdout != inOptions->mOutput)
1030     {
1031         fclose(inOptions->mOutput);
1032     }
1033
1034     memset(inOptions, 0, sizeof(Options));
1035 }
1036
1037
1038 void showHelp(Options* inOptions)
1039 /*
1040 **  Show some simple help text on usage.
1041 */
1042 {
1043     int loop = 0;
1044     const int switchCount = sizeof(gSwitches) / sizeof(gSwitches[0]);
1045     const char* valueText = NULL;
1046
1047     printf("usage:\t%s [arguments]\n", inOptions->mProgramName);
1048     printf("\n");
1049     printf("arguments:\n");
1050
1051     for(loop = 0; loop < switchCount; loop++)
1052     {
1053         if(gSwitches[loop]->mHasValue)
1054         {
1055             valueText = " <value>";
1056         }
1057         else
1058         {
1059             valueText = "";
1060         }
1061
1062         printf("\t%s%s\n", gSwitches[loop]->mLongName, valueText);
1063         printf("\t %s%s", gSwitches[loop]->mShortName, valueText);
1064         printf(DESC_NEWLINE "%s\n\n", gSwitches[loop]->mDescription);
1065     }
1066
1067     printf("This tool takes the output of \"dumpbin /symbols\" to produce a simple\n");
1068     printf("tsv db file of symbols and their respective attributes, like size.\n");
1069 }
1070
1071
1072 int main(int inArgc, char** inArgv)
1073 {
1074     int retval = 0;
1075     Options options;
1076
1077     retval = initOptions(&options, inArgc, inArgv);
1078     if(options.mHelp)
1079     {
1080         showHelp(&options);
1081     }
1082     else if(0 == retval)
1083     {
1084         retval = dump2symdb(&options);
1085     }
1086
1087     cleanOptions(&options);
1088     return retval;
1089 }
1090