Makefile

   1 # Makefile for buildroot
   2 #
   3 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
   4 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
   5 # Copyright (C) 2014 by the Buildroot developers <buildroot@buildroot.org>
   6 #
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  15 # General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  20 #
  21
  22 #--------------------------------------------------------------
  23 # Just run 'make menuconfig', configure stuff, then run 'make'.
  24 # You shouldn't need to mess with anything beyond this point...
  25 #--------------------------------------------------------------
  26
  27 # Set and export the version string
  28 export BR2_VERSION := 2014.11-git
  29
  30 # Check for minimal make version (note: this check will break at make 10.x)
  31 MIN_MAKE_VERSION = 3.81
  32 ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
  33 $(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
  34 endif
  35
  36 export HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/x86/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/ppc64/powerpc64/ \
  42             -e s/ppc/powerpc/ \
  43             -e s/macppc/powerpc/\
  44             -e s/sh.*/sh/)
  45
  46 # Parallel execution of this Makefile is disabled because it changes
  47 # the packages building order, that can be a problem for two reasons:
  48 # - If a package has an unspecified optional dependency and that
  49 #   dependency is present when the package is built, it is used,
  50 #   otherwise it isn't (but compilation happily proceeds) so the end
  51 #   result will differ if the order is swapped due to parallel
  52 #   building.
  53 # - Also changing the building order can be a problem if two packages
  54 #   manipulate the same file in the target directory.
  55 #
  56 # Taking into account the above considerations, if you still want to execute
  57 # this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
  58 # build using the following command:
  59 #       make BR2_JLEVEL= -j$((`getconf _NPROCESSORS_ONLN`+1))
  60 .NOTPARALLEL:
  61
  62 # absolute path
  63 TOPDIR := $(shell pwd)
  64 CONFIG_CONFIG_IN = Config.in
  65 CONFIG = support/kconfig
  66 DATE := $(shell date +%Y%m%d)
  67
  68 # Compute the full local version string so packages can use it as-is
  69 # Need to export it, so it can be got from environment in children (eg. mconf)
  70 export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
  71
  72 noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
  73         defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
  74         randpackageconfig allyespackageconfig allnopackageconfig \
  75         source-check print-version olddefconfig
  76
  77 # Strip quotes and then whitespaces
  78 qstrip = $(strip $(subst ",,$(1)))
  79 #"))
  80
  81 # Variables for use in Make constructs
  82 comma := ,
  83 empty :=
  84 space := $(empty) $(empty)
  85
  86 ifneq ("$(origin O)", "command line")
  87 O := output
  88 CONFIG_DIR := $(TOPDIR)
  89 NEED_WRAPPER =
  90 else
  91 # other packages might also support Linux-style out of tree builds
  92 # with the O=<dir> syntax (E.G. BusyBox does). As make automatically
  93 # forwards command line variable definitions those packages get very
  94 # confused. Fix this by telling make to not do so
  95 MAKEOVERRIDES =
  96 # strangely enough O is still passed to submakes with MAKEOVERRIDES
  97 # (with make 3.81 atleast), the only thing that changes is the output
  98 # of the origin function (command line -> environment).
  99 # Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
 100 # To really make O go away, we have to override it.
 101 override O := $(O)
 102 CONFIG_DIR := $(O)
 103 # we need to pass O= everywhere we call back into the toplevel makefile
 104 EXTRAMAKEARGS = O=$(O)
 105 NEED_WRAPPER = y
 106 endif
 107
 108 # bash prints the name of the directory on 'cd <dir>' if CDPATH is
 109 # set, so unset it here to not cause problems. Notice that the export
 110 # line doesn't affect the environment of $(shell ..) calls, so
 111 # explictly throw away any output from 'cd' here.
 112 export CDPATH :=
 113 BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
 114 $(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
 115
 116
 117 # Handling of BR2_EXTERNAL.
 118 #
 119 # The value of BR2_EXTERNAL is stored in .br-external in the output directory.
 120 # On subsequent invocations of make, it is read in. It can still be overridden
 121 # on the command line, therefore the file is re-created every time make is run.
 122 #
 123 # When BR2_EXTERNAL is not set, the .br-external file is removed and we point
 124 # to support/dummy-external. This makes sure we can unconditionally include the
 125 # Config.in and external.mk from the BR2_EXTERNAL directory. In this case,
 126 # override is necessary so the user can clear BR2_EXTERNAL from the command
 127 # line, but the dummy path is still used internally.
 128
 129 BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external
 130 -include $(BR2_EXTERNAL_FILE)
 131 ifeq ($(BR2_EXTERNAL),)
 132   override BR2_EXTERNAL = support/dummy-external
 133   $(shell rm -f $(BR2_EXTERNAL_FILE))
 134 else
 135   _BR2_EXTERNAL = $(shell cd $(BR2_EXTERNAL) >/dev/null 2>&1 && pwd)
 136   ifeq ($(_BR2_EXTERNAL),)
 137     $(error BR2_EXTERNAL='$(BR2_EXTERNAL)' does not exist, relative to $(TOPDIR))
 138   endif
 139   override BR2_EXTERNAL := $(_BR2_EXTERNAL)
 140   $(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE))
 141 endif
 142
 143 # To make sure the the environment variable overrides the .config option,
 144 # set this before including .config.
 145 ifneq ($(BR2_DL_DIR),)
 146 DL_DIR := $(BR2_DL_DIR)
 147 endif
 148
 149
 150 # Need that early, before we scan packages
 151 # Avoids doing the $(or...) everytime
 152 BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
 153
 154 BUILD_DIR := $(BASE_DIR)/build
 155 BINARIES_DIR := $(BASE_DIR)/images
 156 TARGET_DIR := $(BASE_DIR)/target
 157 # initial definition so that 'make clean' works for most users, even without
 158 # .config. HOST_DIR will be overwritten later when .config is included.
 159 HOST_DIR := $(BASE_DIR)/host
 160
 161 LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
 162 REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
 163 REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
 164 LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
 165 LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
 166 LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
 167 LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
 168 LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
 169 LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
 170 LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
 171 LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
 172
 173 BR2_CONFIG = $(CONFIG_DIR)/.config
 174
 175 # Pull in the user's configuration file
 176 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
 177 -include $(BR2_CONFIG)
 178 endif
 179
 180 # To put more focus on warnings, be less verbose as default
 181 # Use 'make V=1' to see the full commands
 182 ifdef V
 183   ifeq ("$(origin V)", "command line")
 184     KBUILD_VERBOSE = $(V)
 185   endif
 186 endif
 187 ifndef KBUILD_VERBOSE
 188   KBUILD_VERBOSE = 0
 189 endif
 190
 191 ifeq ($(KBUILD_VERBOSE),1)
 192   quiet =
 193   Q =
 194 ifndef VERBOSE
 195   VERBOSE = 1
 196 endif
 197 else
 198   quiet = quiet_
 199   Q = @
 200 endif
 201
 202 # we want bash as shell
 203 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 204          else if [ -x /bin/bash ]; then echo /bin/bash; \
 205          else echo sh; fi; fi)
 206
 207 # kconfig uses CONFIG_SHELL
 208 CONFIG_SHELL := $(SHELL)
 209
 210 export SHELL CONFIG_SHELL quiet Q KBUILD_VERBOSE VERBOSE
 211
 212 ifndef HOSTAR
 213 HOSTAR := ar
 214 endif
 215 ifndef HOSTAS
 216 HOSTAS := as
 217 endif
 218 ifndef HOSTCC
 219 HOSTCC := gcc
 220 HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
 221 endif
 222 HOSTCC_NOCCACHE := $(HOSTCC)
 223 ifndef HOSTCXX
 224 HOSTCXX := g++
 225 HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
 226 endif
 227 HOSTCXX_NOCCACHE := $(HOSTCXX)
 228 ifndef HOSTFC
 229 HOSTFC := gfortran
 230 endif
 231 ifndef HOSTCPP
 232 HOSTCPP := cpp
 233 endif
 234 ifndef HOSTLD
 235 HOSTLD := ld
 236 endif
 237 ifndef HOSTLN
 238 HOSTLN := ln
 239 endif
 240 ifndef HOSTNM
 241 HOSTNM := nm
 242 endif
 243 ifndef HOSTOBJCOPY
 244 HOSTOBJCOPY := objcopy
 245 endif
 246 ifndef HOSTRANLIB
 247 HOSTRANLIB := ranlib
 248 endif
 249 HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
 250 HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
 251 HOSTFC := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
 252 HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
 253 HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
 254 HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
 255 HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
 256 HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
 257 HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
 258
 259 export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
 260 export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
 261
 262 # Make sure pkg-config doesn't look outside the buildroot tree
 263 unexport PKG_CONFIG_PATH
 264 unexport PKG_CONFIG_SYSROOT_DIR
 265 unexport PKG_CONFIG_LIBDIR
 266
 267 # Having DESTDIR set in the environment confuses the installation
 268 # steps of some packages.
 269 unexport DESTDIR
 270
 271 # Causes breakage with packages that needs host-ruby
 272 unexport RUBYOPT
 273
 274 include package/pkg-utils.mk
 275
 276 ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 277
 278 ################################################################################
 279 #
 280 # Hide troublesome environment variables from sub processes
 281 #
 282 ################################################################################
 283 unexport CROSS_COMPILE
 284 unexport ARCH
 285 unexport CC
 286 unexport CXX
 287 unexport CPP
 288 unexport CFLAGS
 289 unexport CXXFLAGS
 290 unexport GREP_OPTIONS
 291 unexport TAR_OPTIONS
 292 unexport CONFIG_SITE
 293 unexport QMAKESPEC
 294 unexport TERMINFO
 295
 296 GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
 297
 298 TARGETS :=
 299
 300 # silent mode requested?
 301 QUIET := $(if $(findstring s,$(MAKEFLAGS)),-q)
 302
 303 # Strip off the annoying quoting
 304 ARCH := $(call qstrip,$(BR2_ARCH))
 305
 306 KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 307         -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 308         -e s/arcle/arc/ \
 309         -e s/arceb/arc/ \
 310         -e s/arm.*/arm/ -e s/sa110/arm/ \
 311         -e s/aarch64/arm64/ \
 312         -e s/bfin/blackfin/ \
 313         -e s/parisc64/parisc/ \
 314         -e s/powerpc64.*/powerpc/ \
 315         -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
 316         -e s/sh.*/sh/ \
 317         -e s/microblazeel/microblaze/)
 318
 319 ZCAT := $(call qstrip,$(BR2_ZCAT))
 320 BZCAT := $(call qstrip,$(BR2_BZCAT))
 321 XZCAT := $(call qstrip,$(BR2_XZCAT))
 322 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
 323
 324 # packages compiled for the host go here
 325 HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
 326
 327 # Quotes are needed for spaces and all in the original PATH content.
 328 BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin:$(PATH)"
 329
 330 TARGET_SKELETON = $(TOPDIR)/system/skeleton
 331
 332 # Location of a file giving a big fat warning that output/target
 333 # should not be used as the root filesystem.
 334 TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
 335
 336 ifeq ($(BR2_CCACHE),y)
 337 CCACHE := $(HOST_DIR)/usr/bin/ccache
 338 BR_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR))
 339 export BR_CACHE_DIR
 340 HOSTCC := $(CCACHE) $(HOSTCC)
 341 HOSTCXX := $(CCACHE) $(HOSTCXX)
 342 endif
 343
 344 # Scripts in support/ or post-build scripts may need to reference
 345 # these locations, so export them so it is easier to use
 346 export BR2_CONFIG
 347 export TARGET_DIR
 348 export STAGING_DIR
 349 export HOST_DIR
 350 export BINARIES_DIR
 351 export BASE_DIR
 352
 353 ################################################################################
 354 #
 355 # You should probably leave this stuff alone unless you know
 356 # what you are doing.
 357 #
 358 ################################################################################
 359
 360 all: world
 361
 362 # Include legacy before the other things, because package .mk files
 363 # may rely on it.
 364 ifneq ($(BR2_DEPRECATED),y)
 365 include Makefile.legacy
 366 endif
 367
 368 include package/Makefile.in
 369 include support/dependencies/dependencies.mk
 370
 371 # We also need the various per-package makefiles, which also add
 372 # each selected package to TARGETS if that package was selected
 373 # in the .config file.
 374 include toolchain/*.mk
 375 include toolchain/*/*.mk
 376
 377 # Include the package override file if one has been provided in the
 378 # configuration.
 379 PACKAGE_OVERRIDE_FILE = $(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
 380 ifneq ($(PACKAGE_OVERRIDE_FILE),)
 381 -include $(PACKAGE_OVERRIDE_FILE)
 382 endif
 383
 384 include $(sort $(wildcard package/*/*.mk))
 385
 386 include boot/common.mk
 387 include linux/linux.mk
 388 include system/system.mk
 389 include fs/common.mk
 390
 391 include $(BR2_EXTERNAL)/external.mk
 392
 393 TARGETS_SOURCE := $(patsubst %,%-source,$(TARGETS))
 394 TARGETS_DIRCLEAN := $(patsubst %,%-dirclean,$(TARGETS))
 395
 396 # host-* dependencies have to be handled specially, as those aren't
 397 # visible in Kconfig and hence not added to a variable like TARGETS.
 398 # instead, find all the host-* targets listed in each <PKG>_DEPENDENCIES
 399 # variable for each enabled target.
 400 # Notice: this only works for newstyle gentargets/autotargets packages
 401 TARGETS_HOST_DEPS = $(sort $(filter host-%,$(foreach dep,\
 402                 $(addsuffix _DEPENDENCIES,\
 403                         $(call UPPERCASE,$(TARGETS) $(TARGETS_ROOTFS))),\
 404                 $($(dep)))))
 405 # Host packages can in turn have their own dependencies. Likewise find
 406 # all the package names listed in the HOST_<PKG>_DEPENDENCIES for each
 407 # host package found above. Ideally this should be done recursively until
 408 # no more packages are found, but that's hard to do in make, so limit to
 409 # 1 level for now.
 410 HOST_DEPS = $(sort $(foreach dep,\
 411                 $(addsuffix _DEPENDENCIES,$(call UPPERCASE,$(TARGETS_HOST_DEPS))),\
 412                 $($(dep))))
 413 HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
 414
 415 TARGETS_LEGAL_INFO := $(patsubst %,%-legal-info,\
 416                 $(TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))))
 417
 418 dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 419         $(HOST_DIR) $(BINARIES_DIR)
 420
 421 $(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
 422         $(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
 423
 424 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 425
 426 world: target-post-image
 427
 428 .PHONY: all world toolchain dirs clean distclean source outputmakefile \
 429         legal-info legal-info-prepare legal-info-clean printvars \
 430         target-finalize target-post-image \
 431         $(TARGETS) $(TARGETS_ROOTFS) \
 432         $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) $(TARGETS_LEGAL_INFO) \
 433         $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 434         $(HOST_DIR) $(BINARIES_DIR)
 435
 436 ################################################################################
 437 #
 438 # staging and target directories do NOT list these as
 439 # dependencies anywhere else
 440 #
 441 ################################################################################
 442 $(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
 443         @mkdir -p $@
 444
 445 # We make a symlink lib32->lib or lib64->lib as appropriate
 446 # MIPS64/n32 requires lib32 even though it's a 64-bit arch.
 447 ifeq ($(BR2_ARCH_IS_64)$(BR2_MIPS_NABI32),y)
 448 LIB_SYMLINK = lib64
 449 else
 450 LIB_SYMLINK = lib32
 451 endif
 452
 453 $(STAGING_DIR):
 454         @mkdir -p $(STAGING_DIR)/bin
 455         @mkdir -p $(STAGING_DIR)/lib
 456         @ln -snf lib $(STAGING_DIR)/$(LIB_SYMLINK)
 457         @mkdir -p $(STAGING_DIR)/usr/lib
 458         @ln -snf lib $(STAGING_DIR)/usr/$(LIB_SYMLINK)
 459         @mkdir -p $(STAGING_DIR)/usr/include
 460         @mkdir -p $(STAGING_DIR)/usr/bin
 461         @ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
 462
 463 ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
 464 TARGET_SKELETON = $(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
 465 endif
 466
 467 RSYNC_VCS_EXCLUSIONS = \
 468         --exclude .svn --exclude .git --exclude .hg --exclude .bzr \
 469         --exclude CVS
 470
 471 $(BUILD_DIR)/.root:
 472         mkdir -p $(TARGET_DIR)
 473         rsync -a --ignore-times $(RSYNC_VCS_EXCLUSIONS) \
 474                 --chmod=Du+w --exclude .empty --exclude '*~' \
 475                 $(TARGET_SKELETON)/ $(TARGET_DIR)/
 476         $(INSTALL) -m 0644 support/misc/target-dir-warning.txt $(TARGET_DIR_WARNING_FILE)
 477         @ln -snf lib $(TARGET_DIR)/$(LIB_SYMLINK)
 478         @mkdir -p $(TARGET_DIR)/usr
 479         @ln -snf lib $(TARGET_DIR)/usr/$(LIB_SYMLINK)
 480         touch $@
 481
 482 $(TARGET_DIR): $(BUILD_DIR)/.root
 483
 484 STRIP_FIND_CMD = find $(TARGET_DIR)
 485 ifneq (,$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)))
 486 STRIP_FIND_CMD += \( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) -prune -o
 487 endif
 488 STRIP_FIND_CMD += -type f \( -perm /111 -o -name '*.so*' \)
 489 # file exclusions:
 490 # - libpthread.so: a non-stripped libpthread shared library is needed for
 491 #   proper debugging of pthread programs using gdb.
 492 # - kernel modules (*.ko): do not function properly when stripped like normal
 493 #   applications and libraries. Normally kernel modules are already excluded
 494 #   by the executable permission check above, so the explicit exclusion is only
 495 #   done for kernel modules with incorrect permissions.
 496 STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* *.ko $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print
 497
 498 ifeq ($(BR2_ECLIPSE_REGISTER),y)
 499 define TOOLCHAIN_ECLIPSE_REGISTER
 500         ./support/scripts/eclipse-register-toolchain `readlink -f $(O)` \
 501                 $(notdir $(TARGET_CROSS)) $(BR2_ARCH)
 502 endef
 503 TARGET_FINALIZE_HOOKS += TOOLCHAIN_ECLIPSE_REGISTER
 504 endif
 505
 506 # Generate locale data. Basically, we call the localedef program
 507 # (built by the host-localedef package) for each locale. The input
 508 # data comes preferably from the toolchain, or if the toolchain does
 509 # not have them (Linaro toolchains), we use the ones available on the
 510 # host machine.
 511 ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
 512 GENERATE_LOCALE = $(call qstrip,$(BR2_GENERATE_LOCALE))
 513 ifneq ($(GENERATE_LOCALE),)
 514 TARGETS += host-localedef
 515
 516 define GENERATE_LOCALES
 517         $(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
 518         $(Q)for locale in $(GENERATE_LOCALE) ; do \
 519                 inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
 520                 charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
 521                 if test -z "$${charmap}" ; then \
 522                         charmap="UTF-8" ; \
 523                 fi ; \
 524                 echo "Generating locale $${inputfile}.$${charmap}" ; \
 525                 I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
 526                 $(HOST_DIR)/usr/bin/localedef \
 527                         --prefix=$(TARGET_DIR) \
 528                         --$(call LOWERCASE,$(BR2_ENDIAN))-endian \
 529                         -i $${inputfile} -f $${charmap} \
 530                         $${locale} ; \
 531         done
 532 endef
 533 TARGET_FINALIZE_HOOKS += GENERATE_LOCALES
 534 endif
 535 endif
 536
 537 ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
 538 LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
 539 LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
 540
 541 define PURGE_LOCALES
 542         rm -f $(LOCALE_WHITELIST)
 543         for i in $(LOCALE_NOPURGE) locale-archive; do echo $$i >> $(LOCALE_WHITELIST); done
 544
 545         for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/man /usr/share/man /usr/lib/locale)); \
 546         do \
 547                 for lang in $$(cd $$dir; ls .|grep -v man); \
 548                 do \
 549                         grep -qx $$lang $(LOCALE_WHITELIST) || rm -rf $$dir/$$lang; \
 550                 done; \
 551         done
 552 endef
 553 TARGET_FINALIZE_HOOKS += PURGE_LOCALES
 554 endif
 555
 556 $(TARGETS_ROOTFS): target-finalize
 557
 558 target-finalize: $(TARGETS)
 559         @$(call MESSAGE,"Finalizing target directory")
 560         $(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 561         rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 562                 $(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
 563                 $(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
 564         find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
 565         find $(TARGET_DIR)/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 566         find $(TARGET_DIR)/usr/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 567 ifneq ($(BR2_PACKAGE_GDB),y)
 568         rm -rf $(TARGET_DIR)/usr/share/gdb
 569 endif
 570         rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
 571         rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
 572         rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
 573         rm -rf $(TARGET_DIR)/usr/share/gtk-doc
 574         -rmdir $(TARGET_DIR)/usr/share 2>/dev/null
 575 ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY)$(BR2_PACKAGE_PYTHON3_PY_ONLY),y)
 576         find $(TARGET_DIR)/usr/lib/ -name '*.pyc' -print0 | xargs -0 rm -f
 577 endif
 578 ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY)$(BR2_PACKAGE_PYTHON3_PYC_ONLY),y)
 579         find $(TARGET_DIR)/usr/lib/ -name '*.py' -print0 | xargs -0 rm -f
 580 endif
 581         $(STRIP_FIND_CMD) | xargs $(STRIPCMD) 2>/dev/null || true
 582         if test -d $(TARGET_DIR)/lib/modules; then \
 583                 find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
 584                 xargs -r $(KSTRIPCMD); fi
 585
 586 # See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
 587 # besides the one in which crash occurred; or SIGTRAP kills my program when
 588 # I set a breakpoint"
 589 ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
 590         find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
 591                 xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 592 endif
 593
 594         mkdir -p $(TARGET_DIR)/etc
 595         # Mandatory configuration file and auxilliary cache directory
 596         # for recent versions of ldconfig
 597         touch $(TARGET_DIR)/etc/ld.so.conf
 598         mkdir -p $(TARGET_DIR)/var/cache/ldconfig
 599         if [ -x "$(TARGET_CROSS)ldconfig" ]; \
 600         then \
 601                 $(TARGET_CROSS)ldconfig -r $(TARGET_DIR); \
 602         else \
 603                 /sbin/ldconfig -r $(TARGET_DIR); \
 604         fi
 605         ( \
 606                 echo "NAME=Buildroot"; \
 607                 echo "VERSION=$(BR2_VERSION_FULL)"; \
 608                 echo "ID=buildroot"; \
 609                 echo "VERSION_ID=$(BR2_VERSION)"; \
 610                 echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
 611         ) >  $(TARGET_DIR)/etc/os-release
 612
 613         @$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
 614                 $(call MESSAGE,"Copying overlay $(d)"); \
 615                 rsync -a --ignore-times $(RSYNC_VCS_EXCLUSIONS) \
 616                         --chmod=Du+w --exclude .empty --exclude '*~' \
 617                         $(d)/ $(TARGET_DIR)$(sep))
 618
 619         @$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
 620                 $(call MESSAGE,"Executing post-build script $(s)"); \
 621                 $(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 622
 623 target-post-image: $(TARGETS_ROOTFS) target-finalize
 624         @$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
 625                 $(call MESSAGE,"Executing post-image script $(s)"); \
 626                 $(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 627
 628 source: $(TARGETS_SOURCE) $(HOST_SOURCE)
 629
 630 external-deps:
 631         @$(MAKE1) -Bs DL_MODE=SHOW_EXTERNAL_DEPS $(EXTRAMAKEARGS) source | sort -u
 632
 633 legal-info-clean:
 634         @rm -fr $(LEGAL_INFO_DIR)
 635
 636 legal-info-prepare: $(LEGAL_INFO_DIR)
 637         @$(call MESSAGE,"Collecting legal info")
 638         @$(call legal-license-file,buildroot,COPYING,COPYING,HOST)
 639         @$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,TARGET)
 640         @$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
 641         @$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,not saved,HOST)
 642         @$(call legal-warning,the Buildroot source code has not been saved)
 643         @$(call legal-warning,the toolchain has not been saved)
 644         @cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
 645
 646 legal-info: dirs legal-info-clean legal-info-prepare $(TARGETS_LEGAL_INFO) \
 647                 $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST)
 648         @cat support/legal-info/README.header >>$(LEGAL_REPORT)
 649         @if [ -r $(LEGAL_WARNINGS) ]; then \
 650                 cat support/legal-info/README.warnings-header \
 651                         $(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
 652                 cat $(LEGAL_WARNINGS); fi
 653         @echo "Legal info produced in $(LEGAL_INFO_DIR)"
 654         @rm -f $(LEGAL_WARNINGS)
 655
 656 show-targets:
 657         @echo $(HOST_DEPS) $(TARGETS_HOST_DEPS) $(TARGETS) $(TARGETS_ROOTFS)
 658
 659 graph-build: $(O)/build/build-time.log
 660         @install -d $(O)/graphs
 661         $(foreach o,name build duration,./support/scripts/graph-build-time \
 662                                         --type=histogram --order=$(o) --input=$(<) \
 663                                         --output=$(O)/graphs/build.hist-$(o).$(BR_GRAPH_OUT) \
 664                                         $(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
 665         $(foreach t,packages steps,./support/scripts/graph-build-time \
 666                                    --type=pie-$(t) --input=$(<) \
 667                                    --output=$(O)/graphs/build.pie-$(t).$(BR_GRAPH_OUT) \
 668                                    $(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
 669
 670 graph-depends-requirements:
 671         @dot -? >/dev/null 2>&1 || \
 672                 { echo "ERROR: The 'dot' program from Graphviz is needed for graph-depends" >&2; exit 1; }
 673
 674 graph-depends: graph-depends-requirements
 675         @$(INSTALL) -d $(O)/graphs
 676         @cd "$(CONFIG_DIR)"; \
 677         $(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
 678         |tee $(BASE_DIR)/graphs/$(@).dot \
 679         |dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(BASE_DIR)/graphs/$(@).$(BR_GRAPH_OUT)
 680
 681 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 682
 683 all: menuconfig
 684
 685 endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 686
 687 # configuration
 688 # ---------------------------------------------------------------------------
 689
 690 HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
 691 export HOSTCFLAGS
 692
 693 $(BUILD_DIR)/buildroot-config/%onf:
 694         mkdir -p $(@D)/lxdialog
 695         $(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
 696
 697 DEFCONFIG = $(call qstrip,$(BR2_DEFCONFIG))
 698
 699 # We don't want to fully expand BR2_DEFCONFIG here, so Kconfig will
 700 # recognize that if it's still at its default $(CONFIG_DIR)/defconfig
 701 COMMON_CONFIG_ENV = \
 702         BR2_DEFCONFIG='$(call qstrip,$(value BR2_DEFCONFIG))' \
 703         KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
 704         KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
 705         KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
 706         BR2_CONFIG=$(BR2_CONFIG) \
 707         BR2_EXTERNAL=$(BR2_EXTERNAL)
 708
 709 xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
 710         @mkdir -p $(BUILD_DIR)/buildroot-config
 711         @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 712
 713 gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
 714         @mkdir -p $(BUILD_DIR)/buildroot-config
 715         @$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
 716
 717 menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
 718         @mkdir -p $(BUILD_DIR)/buildroot-config
 719         @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 720
 721 nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
 722         @mkdir -p $(BUILD_DIR)/buildroot-config
 723         @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 724
 725 config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 726         @mkdir -p $(BUILD_DIR)/buildroot-config
 727         @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 728
 729 oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 730         mkdir -p $(BUILD_DIR)/buildroot-config
 731         @$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
 732
 733 randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 734         @mkdir -p $(BUILD_DIR)/buildroot-config
 735         @$(COMMON_CONFIG_ENV) $< --randconfig $(CONFIG_CONFIG_IN)
 736
 737 allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 738         @mkdir -p $(BUILD_DIR)/buildroot-config
 739         @$(COMMON_CONFIG_ENV) $< --allyesconfig $(CONFIG_CONFIG_IN)
 740
 741 allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 742         @mkdir -p $(BUILD_DIR)/buildroot-config
 743         @$(COMMON_CONFIG_ENV) $< --allnoconfig $(CONFIG_CONFIG_IN)
 744
 745 randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 746         @mkdir -p $(BUILD_DIR)/buildroot-config
 747         @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 748         @grep '^config BR2_PACKAGE_' Config.in.legacy | \
 749                 while read config pkg; do \
 750                 echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
 751         @$(COMMON_CONFIG_ENV) \
 752                 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 753                 $< --randconfig $(CONFIG_CONFIG_IN)
 754         @rm -f $(CONFIG_DIR)/.config.nopkg
 755
 756 allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 757         @mkdir -p $(BUILD_DIR)/buildroot-config
 758         @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 759         @grep '^config BR2_PACKAGE_' Config.in.legacy | \
 760                 while read config pkg; do \
 761                 echo "# $$pkg is not set" >> $(CONFIG_DIR)/.config.nopkg; done
 762         @$(COMMON_CONFIG_ENV) \
 763                 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 764                 $< --allyesconfig $(CONFIG_CONFIG_IN)
 765         @rm -f $(CONFIG_DIR)/.config.nopkg
 766
 767 allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 768         @mkdir -p $(BUILD_DIR)/buildroot-config
 769         @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 770         @$(COMMON_CONFIG_ENV) \
 771                 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 772                 $< --allnoconfig $(CONFIG_CONFIG_IN)
 773         @rm -f $(CONFIG_DIR)/.config.nopkg
 774
 775 silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 776         @mkdir -p $(BUILD_DIR)/buildroot-config
 777         $(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
 778
 779 olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 780         @mkdir -p $(BUILD_DIR)/buildroot-config
 781         $(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN)
 782
 783 defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 784         @mkdir -p $(BUILD_DIR)/buildroot-config
 785         @$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
 786
 787 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
 788         @mkdir -p $(BUILD_DIR)/buildroot-config
 789         @$(COMMON_CONFIG_ENV) $< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
 790
 791 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(BR2_EXTERNAL)/configs/%_defconfig outputmakefile
 792         @mkdir -p $(BUILD_DIR)/buildroot-config
 793         @$(COMMON_CONFIG_ENV) $< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
 794
 795 savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 796         @mkdir -p $(BUILD_DIR)/buildroot-config
 797         @$(COMMON_CONFIG_ENV) $< \
 798                 --savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
 799                 $(CONFIG_CONFIG_IN)
 800
 801 # check if download URLs are outdated
 802 source-check:
 803         $(MAKE1) DL_MODE=SOURCE_CHECK $(EXTRAMAKEARGS) source
 804
 805 .PHONY: defconfig savedefconfig
 806
 807 ################################################################################
 808 #
 809 # Cleanup and misc junk
 810 #
 811 ################################################################################
 812
 813 # outputmakefile generates a Makefile in the output directory, if using a
 814 # separate output directory. This allows convenient use of make in the
 815 # output directory.
 816 outputmakefile:
 817 ifeq ($(NEED_WRAPPER),y)
 818         $(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
 819 endif
 820
 821 # printvars prints all the variables currently defined in our Makefiles
 822 printvars:
 823         @$(foreach V, \
 824                 $(sort $(.VARIABLES)), \
 825                 $(if $(filter-out environment% default automatic, \
 826                                 $(origin $V)), \
 827                 $(info $V=$($V) ($(value $V)))))
 828
 829 clean:
 830         rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
 831                 $(BUILD_DIR) $(BASE_DIR)/staging \
 832                 $(LEGAL_INFO_DIR)
 833
 834 distclean: clean
 835 ifeq ($(DL_DIR),$(TOPDIR)/dl)
 836         rm -rf $(DL_DIR)
 837 endif
 838 ifeq ($(O),output)
 839         rm -rf $(O)
 840 endif
 841         rm -rf $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps
 842
 843 help:
 844         @echo 'Cleaning:'
 845         @echo '  clean                  - delete all files created by build'
 846         @echo '  distclean              - delete all non-source files (including .config)'
 847         @echo
 848         @echo 'Build:'
 849         @echo '  all                    - make world'
 850         @echo '  toolchain              - build toolchain'
 851         @echo '  <package>-rebuild      - force recompile <package>'
 852         @echo '  <package>-reconfigure  - force reconfigure <package>'
 853         @echo '  <package>-graph-depends    - generate graph of the dependency tree for package'
 854         @echo
 855         @echo 'Configuration:'
 856         @echo '  menuconfig             - interactive curses-based configurator'
 857         @echo '  nconfig                - interactive ncurses-based configurator'
 858         @echo '  xconfig                - interactive Qt-based configurator'
 859         @echo '  gconfig                - interactive GTK-based configurator'
 860         @echo '  oldconfig              - resolve any unresolved symbols in .config'
 861         @echo '  silentoldconfig        - Same as oldconfig, but quietly, additionally update deps'
 862         @echo '  olddefconfig           - Same as silentoldconfig but sets new symbols to their default value'
 863         @echo '  randconfig             - New config with random answer to all options'
 864         @echo '  defconfig              - New config with default answer to all options'
 865         @echo '                             BR2_DEFCONFIG, if set, is used as input'
 866         @echo '  savedefconfig          - Save current config as ./defconfig (minimal config)'
 867         @echo '  allyesconfig           - New config where all options are accepted with yes'
 868         @echo '  allnoconfig            - New config where all options are answered with no'
 869         @echo '  randpackageconfig      - New config with random answer to package options'
 870         @echo '  allyespackageconfig    - New config where pkg options are accepted with yes'
 871         @echo '  allnopackageconfig     - New config where package options are answered with no'
 872 ifeq ($(BR2_PACKAGE_BUSYBOX),y)
 873         @echo '  busybox-menuconfig     - Run BusyBox menuconfig'
 874 endif
 875 ifeq ($(BR2_LINUX_KERNEL),y)
 876         @echo '  linux-menuconfig       - Run Linux kernel menuconfig'
 877         @echo '  linux-savedefconfig    - Run Linux kernel savedefconfig'
 878 endif
 879 ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
 880         @echo '  uclibc-menuconfig      - Run uClibc menuconfig'
 881 endif
 882 ifeq ($(BR2_TARGET_BAREBOX),y)
 883         @echo '  barebox-menuconfig     - Run barebox menuconfig'
 884         @echo '  barebox-savedefconfig  - Run barebox savedefconfig'
 885 endif
 886         @echo
 887         @echo 'Documentation:'
 888         @echo '  manual                 - build manual in all formats'
 889         @echo '  manual-html            - build manual in HTML'
 890         @echo '  manual-split-html      - build manual in split HTML'
 891         @echo '  manual-pdf             - build manual in PDF'
 892         @echo '  manual-text            - build manual in text'
 893         @echo '  manual-epub            - build manual in ePub'
 894         @echo '  graph-build            - generate graphs of the build times'
 895         @echo '  graph-depends          - generate graph of the dependency tree'
 896         @echo
 897         @echo 'Miscellaneous:'
 898         @echo '  source                 - download all sources needed for offline-build'
 899         @echo '  source-check           - check selected packages for valid download URLs'
 900         @echo '  external-deps          - list external packages used'
 901         @echo '  legal-info             - generate info about license compliance'
 902         @echo
 903         @echo '  make V=0|1             - 0 => quiet build (default), 1 => verbose build'
 904         @echo '  make O=dir             - Locate all output files in "dir", including .config'
 905         @echo
 906         @echo 'Built-in configs:'
 907         @$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
 908           printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
 909 ifneq ($(wildcard $(BR2_EXTERNAL)/configs/*_defconfig),)
 910         @echo
 911         @echo 'User-provided configs:'
 912         @$(foreach b, $(sort $(notdir $(wildcard $(BR2_EXTERNAL)/configs/*_defconfig))), \
 913           printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
 914 endif
 915         @echo
 916         @echo 'See docs/README, or generate the Buildroot manual for further details'
 917         @echo
 918
 919 release: OUT = buildroot-$(BR2_VERSION)
 920
 921 # Create release tarballs. We need to fiddle a bit to add the generated
 922 # documentation to the git output
 923 release:
 924         git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
 925         $(MAKE) O=$(OUT) manual-html manual-text manual-pdf
 926         tar rf $(OUT).tar $(OUT)
 927         gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
 928         bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
 929         rm -rf $(OUT) $(OUT).tar
 930
 931 print-version:
 932         @echo $(BR2_VERSION_FULL)
 933
 934 include docs/manual/manual.mk
 935
 936 .PHONY: $(noconfig_targets)