Makefile

   1 # Makefile for buildroot
   2 #
   3 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
   4 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
   5 # Copyright (C) 2014-2016 by the Buildroot developers <buildroot@buildroot.org>
   6 #
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  15 # General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  20 #
  21
  22 #--------------------------------------------------------------
  23 # Just run 'make menuconfig', configure stuff, then run 'make'.
  24 # You shouldn't need to mess with anything beyond this point...
  25 #--------------------------------------------------------------
  26
  27 # we want bash as shell
  28 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  29          else if [ -x /bin/bash ]; then echo /bin/bash; \
  30          else echo sh; fi; fi)
  31
  32 # Trick for always running with a fixed umask
  33 UMASK = 0022
  34 ifneq ($(shell umask),$(UMASK))
  35 .PHONY: _all $(MAKECMDGOALS)
  36
  37 $(MAKECMDGOALS): _all
  38         @:
  39
  40 _all:
  41         @umask $(UMASK) && $(MAKE) --no-print-directory $(MAKECMDGOALS)
  42
  43 else # umask
  44
  45 # This is our default rule, so must come first
  46 all:
  47
  48 # Set and export the version string
  49 export BR2_VERSION := 2016.08-rc2
  50
  51 # Save running make version since it's clobbered by the make package
  52 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
  53
  54 # Check for minimal make version (note: this check will break at make 10.x)
  55 MIN_MAKE_VERSION = 3.81
  56 ifneq ($(firstword $(sort $(RUNNING_MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
  57 $(error You have make '$(RUNNING_MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
  58 endif
  59
  60 # Parallel execution of this Makefile is disabled because it changes
  61 # the packages building order, that can be a problem for two reasons:
  62 # - If a package has an unspecified optional dependency and that
  63 #   dependency is present when the package is built, it is used,
  64 #   otherwise it isn't (but compilation happily proceeds) so the end
  65 #   result will differ if the order is swapped due to parallel
  66 #   building.
  67 # - Also changing the building order can be a problem if two packages
  68 #   manipulate the same file in the target directory.
  69 #
  70 # Taking into account the above considerations, if you still want to execute
  71 # this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
  72 # use the -j<jobs> option when building, e.g:
  73 #      make -j$((`getconf _NPROCESSORS_ONLN`+1))
  74 .NOTPARALLEL:
  75
  76 # absolute path
  77 TOPDIR := $(CURDIR)
  78 CONFIG_CONFIG_IN = Config.in
  79 CONFIG = support/kconfig
  80 DATE := $(shell date +%Y%m%d)
  81
  82 # Compute the full local version string so packages can use it as-is
  83 # Need to export it, so it can be got from environment in children (eg. mconf)
  84 export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
  85
  86 noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
  87         defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
  88         randpackageconfig allyespackageconfig allnopackageconfig \
  89         print-version olddefconfig
  90
  91 # Some global targets do not trigger a build, but are used to collect
  92 # metadata, or do various checks. When such targets are triggered,
  93 # some packages should not do their configuration sanity
  94 # checks. Provide them a BR_BUILDING variable set to 'y' when we're
  95 # actually building and they should do their sanity checks.
  96 #
  97 # We're building in two situations: when MAKECMDGOALS is empty
  98 # (default target is to build), or when MAKECMDGOALS contains
  99 # something else than one of the nobuild_targets.
 100 nobuild_targets := source source-check \
 101         legal-info external-deps _external-deps \
 102         clean distclean help
 103 ifeq ($(MAKECMDGOALS),)
 104 BR_BUILDING = y
 105 else ifneq ($(filter-out $(nobuild_targets),$(MAKECMDGOALS)),)
 106 BR_BUILDING = y
 107 endif
 108
 109 # Strip quotes and then whitespaces
 110 qstrip = $(strip $(subst ",,$(1)))
 111 #"))
 112
 113 # Variables for use in Make constructs
 114 comma := ,
 115 empty :=
 116 space := $(empty) $(empty)
 117
 118 ifneq ("$(origin O)", "command line")
 119 O := output
 120 CONFIG_DIR := $(TOPDIR)
 121 NEED_WRAPPER =
 122 else
 123 # other packages might also support Linux-style out of tree builds
 124 # with the O=<dir> syntax (E.G. BusyBox does). As make automatically
 125 # forwards command line variable definitions those packages get very
 126 # confused. Fix this by telling make to not do so
 127 MAKEOVERRIDES =
 128 # strangely enough O is still passed to submakes with MAKEOVERRIDES
 129 # (with make 3.81 atleast), the only thing that changes is the output
 130 # of the origin function (command line -> environment).
 131 # Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
 132 # To really make O go away, we have to override it.
 133 override O := $(O)
 134 CONFIG_DIR := $(O)
 135 # we need to pass O= everywhere we call back into the toplevel makefile
 136 EXTRAMAKEARGS = O=$(O)
 137 NEED_WRAPPER = y
 138 endif
 139
 140 # bash prints the name of the directory on 'cd <dir>' if CDPATH is
 141 # set, so unset it here to not cause problems. Notice that the export
 142 # line doesn't affect the environment of $(shell ..) calls, so
 143 # explictly throw away any output from 'cd' here.
 144 export CDPATH :=
 145 BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
 146 $(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
 147
 148
 149 # Handling of BR2_EXTERNAL.
 150 #
 151 # The value of BR2_EXTERNAL is stored in .br-external in the output directory.
 152 # On subsequent invocations of make, it is read in. It can still be overridden
 153 # on the command line, therefore the file is re-created every time make is run.
 154 #
 155 # When BR2_EXTERNAL is set to an empty value (e.g. explicitly in command
 156 # line), the .br-external file is removed and we point to
 157 # support/dummy-external. This makes sure we can unconditionally include the
 158 # Config.in and external.mk from the BR2_EXTERNAL directory. In this case,
 159 # override is necessary so the user can clear BR2_EXTERNAL from the command
 160 # line, but the dummy path is still used internally.
 161
 162 BR2_EXTERNAL_FILE = $(BASE_DIR)/.br-external
 163 -include $(BR2_EXTERNAL_FILE)
 164 ifeq ($(BR2_EXTERNAL),)
 165   override BR2_EXTERNAL = support/dummy-external
 166   $(shell rm -f $(BR2_EXTERNAL_FILE))
 167 else
 168   _BR2_EXTERNAL = $(shell cd $(BR2_EXTERNAL) >/dev/null 2>&1 && pwd)
 169   ifeq ($(_BR2_EXTERNAL),)
 170     $(error BR2_EXTERNAL='$(BR2_EXTERNAL)' does not exist, relative to $(TOPDIR))
 171   endif
 172   override BR2_EXTERNAL := $(_BR2_EXTERNAL)
 173   $(shell echo BR2_EXTERNAL ?= $(BR2_EXTERNAL) > $(BR2_EXTERNAL_FILE))
 174 endif
 175
 176 # To make sure that the environment variable overrides the .config option,
 177 # set this before including .config.
 178 ifneq ($(BR2_DL_DIR),)
 179 DL_DIR := $(BR2_DL_DIR)
 180 endif
 181 ifneq ($(BR2_CCACHE_DIR),)
 182 BR_CACHE_DIR := $(BR2_CCACHE_DIR)
 183 endif
 184
 185 # Need that early, before we scan packages
 186 # Avoids doing the $(or...) everytime
 187 BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
 188
 189 BUILD_DIR := $(BASE_DIR)/build
 190 BINARIES_DIR := $(BASE_DIR)/images
 191 TARGET_DIR := $(BASE_DIR)/target
 192 # initial definition so that 'make clean' works for most users, even without
 193 # .config. HOST_DIR will be overwritten later when .config is included.
 194 HOST_DIR := $(BASE_DIR)/host
 195 GRAPHS_DIR := $(BASE_DIR)/graphs
 196
 197 LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
 198 REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
 199 REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
 200 LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
 201 LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
 202 LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
 203 LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
 204 LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
 205 LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
 206 LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
 207 LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
 208
 209 BR2_CONFIG = $(CONFIG_DIR)/.config
 210
 211 # Pull in the user's configuration file
 212 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
 213 -include $(BR2_CONFIG)
 214 endif
 215
 216 # timezone and locale may affect build output
 217 ifeq ($(BR2_REPRODUCIBLE),y)
 218 export TZ=UTC
 219 export LANG=C
 220 export LC_ALL=C
 221 endif
 222
 223 # To put more focus on warnings, be less verbose as default
 224 # Use 'make V=1' to see the full commands
 225 ifeq ("$(origin V)", "command line")
 226   KBUILD_VERBOSE = $(V)
 227 endif
 228 ifndef KBUILD_VERBOSE
 229   KBUILD_VERBOSE = 0
 230 endif
 231
 232 ifeq ($(KBUILD_VERBOSE),1)
 233   Q =
 234 ifndef VERBOSE
 235   VERBOSE = 1
 236 endif
 237 export VERBOSE
 238 else
 239   Q = @
 240 endif
 241
 242 # kconfig uses CONFIG_SHELL
 243 CONFIG_SHELL := $(SHELL)
 244
 245 export SHELL CONFIG_SHELL Q KBUILD_VERBOSE
 246
 247 ifndef HOSTAR
 248 HOSTAR := ar
 249 endif
 250 ifndef HOSTAS
 251 HOSTAS := as
 252 endif
 253 ifndef HOSTCC
 254 HOSTCC := gcc
 255 HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
 256 endif
 257 HOSTCC_NOCCACHE := $(HOSTCC)
 258 ifndef HOSTCXX
 259 HOSTCXX := g++
 260 HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
 261 endif
 262 HOSTCXX_NOCCACHE := $(HOSTCXX)
 263 ifndef HOSTCPP
 264 HOSTCPP := cpp
 265 endif
 266 ifndef HOSTLD
 267 HOSTLD := ld
 268 endif
 269 ifndef HOSTLN
 270 HOSTLN := ln
 271 endif
 272 ifndef HOSTNM
 273 HOSTNM := nm
 274 endif
 275 ifndef HOSTOBJCOPY
 276 HOSTOBJCOPY := objcopy
 277 endif
 278 ifndef HOSTRANLIB
 279 HOSTRANLIB := ranlib
 280 endif
 281 HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
 282 HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
 283 HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
 284 HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
 285 HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
 286 HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
 287 HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
 288 HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
 289
 290 export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTLD
 291 export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
 292
 293 # Determine the userland we are running on.
 294 #
 295 # Note that, despite its name, we are not interested in the actual
 296 # architecture name. This is mostly used to determine whether some
 297 # of the binary tools (e.g. pre-built external toolchains) can run
 298 # on the current host. So we need to know if the userland we're
 299 # running on can actually run those toolchains.
 300 #
 301 # For example, a 64-bit prebuilt toolchain will not run on a 64-bit
 302 # kernel if the userland is 32-bit (e.g. in a chroot for example).
 303 #
 304 # So, we extract the first part of the tuple the host gcc was
 305 # configured to generate code for; we assume this is our userland.
 306 #
 307 export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \
 308         sed -e '/^Target: \([^-]*\).*/!d' \
 309             -e 's//\1/' \
 310             -e 's/i.86/x86/' \
 311             -e 's/sun4u/sparc64/' \
 312             -e 's/arm.*/arm/' \
 313             -e 's/sa110/arm/' \
 314             -e 's/ppc64/powerpc64/' \
 315             -e 's/ppc/powerpc/' \
 316             -e 's/macppc/powerpc/' \
 317             -e 's/sh.*/sh/' )
 318
 319 HOSTCC_VERSION := $(shell $(HOSTCC_NOCCACHE) --version | \
 320         sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p')
 321
 322 # For gcc >= 5.x, we only need the major version.
 323 ifneq ($(firstword $(HOSTCC_VERSION)),4)
 324 HOSTCC_VERSION := $(firstword $(HOSTCC_VERSION))
 325 endif
 326
 327 # Make sure pkg-config doesn't look outside the buildroot tree
 328 HOST_PKG_CONFIG_PATH := $(PKG_CONFIG_PATH)
 329 unexport PKG_CONFIG_PATH
 330 unexport PKG_CONFIG_SYSROOT_DIR
 331 unexport PKG_CONFIG_LIBDIR
 332
 333 # Having DESTDIR set in the environment confuses the installation
 334 # steps of some packages.
 335 unexport DESTDIR
 336
 337 # Causes breakage with packages that needs host-ruby
 338 unexport RUBYOPT
 339
 340 include package/pkg-utils.mk
 341 include package/doc-asciidoc.mk
 342
 343 ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 344
 345 ################################################################################
 346 #
 347 # Hide troublesome environment variables from sub processes
 348 #
 349 ################################################################################
 350 unexport CROSS_COMPILE
 351 unexport ARCH
 352 unexport CC
 353 unexport LD
 354 unexport AR
 355 unexport CXX
 356 unexport CPP
 357 unexport RANLIB
 358 unexport CFLAGS
 359 unexport CXXFLAGS
 360 unexport GREP_OPTIONS
 361 unexport TAR_OPTIONS
 362 unexport CONFIG_SITE
 363 unexport QMAKESPEC
 364 unexport TERMINFO
 365 unexport MACHINE
 366 unexport O
 367
 368 GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
 369
 370 PACKAGES :=
 371 PACKAGES_ALL :=
 372
 373 # silent mode requested?
 374 QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q)
 375
 376 # Strip off the annoying quoting
 377 ARCH := $(call qstrip,$(BR2_ARCH))
 378
 379 KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 380         -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 381         -e s/arcle/arc/ \
 382         -e s/arceb/arc/ \
 383         -e s/arm.*/arm/ -e s/sa110/arm/ \
 384         -e s/aarch64.*/arm64/ \
 385         -e s/bfin/blackfin/ \
 386         -e s/parisc64/parisc/ \
 387         -e s/powerpc64.*/powerpc/ \
 388         -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
 389         -e s/sh.*/sh/ \
 390         -e s/microblazeel/microblaze/)
 391
 392 ZCAT := $(call qstrip,$(BR2_ZCAT))
 393 BZCAT := $(call qstrip,$(BR2_BZCAT))
 394 XZCAT := $(call qstrip,$(BR2_XZCAT))
 395 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
 396
 397 # packages compiled for the host go here
 398 HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
 399
 400 # Quotes are needed for spaces and all in the original PATH content.
 401 BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin:$(PATH)"
 402
 403 # Location of a file giving a big fat warning that output/target
 404 # should not be used as the root filesystem.
 405 TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
 406
 407 ifeq ($(BR2_CCACHE),y)
 408 CCACHE := $(HOST_DIR)/usr/bin/ccache
 409 BR_CACHE_DIR ?= $(call qstrip,$(BR2_CCACHE_DIR))
 410 export BR_CACHE_DIR
 411 HOSTCC := $(CCACHE) $(HOSTCC)
 412 HOSTCXX := $(CCACHE) $(HOSTCXX)
 413 else
 414 export BR_NO_CCACHE
 415 endif
 416
 417 # Scripts in support/ or post-build scripts may need to reference
 418 # these locations, so export them so it is easier to use
 419 export BR2_CONFIG
 420 export BR2_REPRODUCIBLE
 421 export TARGET_DIR
 422 export STAGING_DIR
 423 export HOST_DIR
 424 export BINARIES_DIR
 425 export BASE_DIR
 426
 427 ################################################################################
 428 #
 429 # You should probably leave this stuff alone unless you know
 430 # what you are doing.
 431 #
 432 ################################################################################
 433
 434 all: world
 435
 436 # Include legacy before the other things, because package .mk files
 437 # may rely on it.
 438 ifneq ($(BR2_DEPRECATED),y)
 439 include Makefile.legacy
 440 endif
 441
 442 include package/Makefile.in
 443 include support/dependencies/dependencies.mk
 444
 445 include toolchain/*.mk
 446 include toolchain/*/*.mk
 447
 448 # Include the package override file if one has been provided in the
 449 # configuration.
 450 PACKAGE_OVERRIDE_FILE = $(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
 451 ifneq ($(PACKAGE_OVERRIDE_FILE),)
 452 -include $(PACKAGE_OVERRIDE_FILE)
 453 endif
 454
 455 include $(sort $(wildcard package/*/*.mk))
 456
 457 include boot/common.mk
 458 include linux/linux.mk
 459 include fs/common.mk
 460
 461 include $(BR2_EXTERNAL)/external.mk
 462
 463 # Now we are sure we have all the packages scanned and defined. We now
 464 # check for each package in the list of enabled packages, that all its
 465 # dependencies are indeed enabled.
 466 #
 467 # Only trigger the check for default builds. If the user forces building
 468 # a package, even if not enabled in the configuration, we want to accept
 469 # it.
 470 #
 471 ifeq ($(MAKECMDGOALS),)
 472
 473 define CHECK_ONE_DEPENDENCY
 474 ifeq ($$($(2)_TYPE),target)
 475 ifeq ($$($(2)_IS_VIRTUAL),)
 476 ifneq ($$($$($(2)_KCONFIG_VAR)),y)
 477 $$(error $$($(2)_NAME) is in the dependency chain of $$($(1)_NAME) that \
 478 has added it to its _DEPENDENCIES variable without selecting it or \
 479 depending on it from Config.in)
 480 endif
 481 endif
 482 endif
 483 endef
 484
 485 $(foreach pkg,$(call UPPERCASE,$(PACKAGES)),\
 486         $(foreach dep,$(call UPPERCASE,$($(pkg)_FINAL_ALL_DEPENDENCIES)),\
 487                 $(eval $(call CHECK_ONE_DEPENDENCY,$(pkg),$(dep))$(sep))))
 488
 489 endif
 490
 491 dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
 492         $(HOST_DIR) $(BINARIES_DIR)
 493
 494 $(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
 495         $(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
 496
 497 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 498
 499 world: target-post-image
 500
 501 .PHONY: all world toolchain dirs clean distclean source outputmakefile \
 502         legal-info legal-info-prepare legal-info-clean printvars help \
 503         list-defconfigs target-finalize target-post-image source-check
 504
 505 ################################################################################
 506 #
 507 # staging and target directories do NOT list these as
 508 # dependencies anywhere else
 509 #
 510 ################################################################################
 511 $(BUILD_DIR) $(TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
 512         @mkdir -p $@
 513
 514 # Populating the staging with the base directories is handled by the skeleton package
 515 $(STAGING_DIR):
 516         @mkdir -p $(STAGING_DIR)
 517         @ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
 518
 519 RSYNC_VCS_EXCLUSIONS = \
 520         --exclude .svn --exclude .git --exclude .hg --exclude .bzr \
 521         --exclude CVS
 522
 523 STRIP_FIND_CMD = find $(TARGET_DIR)
 524 ifneq (,$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)))
 525 STRIP_FIND_CMD += \( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) -prune -o
 526 endif
 527 STRIP_FIND_CMD += -type f \( -perm /111 -o -name '*.so*' \)
 528 # file exclusions:
 529 # - libpthread.so: a non-stripped libpthread shared library is needed for
 530 #   proper debugging of pthread programs using gdb.
 531 # - ld.so: a non-stripped dynamic linker library is needed for valgrind
 532 # - kernel modules (*.ko): do not function properly when stripped like normal
 533 #   applications and libraries. Normally kernel modules are already excluded
 534 #   by the executable permission check above, so the explicit exclusion is only
 535 #   done for kernel modules with incorrect permissions.
 536 STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* ld-*.so* *.ko $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print0
 537
 538 ifeq ($(BR2_ECLIPSE_REGISTER),y)
 539 define TOOLCHAIN_ECLIPSE_REGISTER
 540         ./support/scripts/eclipse-register-toolchain `readlink -f $(O)` \
 541                 $(notdir $(TARGET_CROSS)) $(BR2_ARCH)
 542 endef
 543 TARGET_FINALIZE_HOOKS += TOOLCHAIN_ECLIPSE_REGISTER
 544 endif
 545
 546 # Generate locale data. Basically, we call the localedef program
 547 # (built by the host-localedef package) for each locale. The input
 548 # data comes preferably from the toolchain, or if the toolchain does
 549 # not have them (Linaro toolchains), we use the ones available on the
 550 # host machine.
 551 ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
 552 GLIBC_GENERATE_LOCALES = $(call qstrip,$(BR2_GENERATE_LOCALE))
 553 ifneq ($(GLIBC_GENERATE_LOCALES),)
 554 PACKAGES += host-localedef
 555
 556 define GENERATE_GLIBC_LOCALES
 557         $(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
 558         $(Q)for locale in $(GLIBC_GENERATE_LOCALES) ; do \
 559                 inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
 560                 charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
 561                 if test -z "$${charmap}" ; then \
 562                         charmap="UTF-8" ; \
 563                 fi ; \
 564                 echo "Generating locale $${inputfile}.$${charmap}" ; \
 565                 I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
 566                 $(HOST_DIR)/usr/bin/localedef \
 567                         --prefix=$(TARGET_DIR) \
 568                         --$(call LOWERCASE,$(BR2_ENDIAN))-endian \
 569                         -i $${inputfile} -f $${charmap} \
 570                         $${locale} ; \
 571         done
 572 endef
 573 TARGET_FINALIZE_HOOKS += GENERATE_GLIBC_LOCALES
 574 endif
 575 endif
 576
 577 ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
 578 LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
 579 LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
 580
 581 # This piece of junk does the following:
 582 # First collect the whitelist in a file.
 583 # Then go over all the locale dirs and for each subdir, check if it exists
 584 # in the whitelist file. If it doesn't, kill it.
 585 # Finally, specifically for X11, regenerate locale.dir from the whitelist.
 586 define PURGE_LOCALES
 587         rm -f $(LOCALE_WHITELIST)
 588         for i in $(LOCALE_NOPURGE) locale-archive; do echo $$i >> $(LOCALE_WHITELIST); done
 589
 590         for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale)); \
 591         do \
 592                 for langdir in $$dir/*; \
 593                 do \
 594                         if [ -e "$${langdir}" ]; \
 595                         then \
 596                                 grep -qx "$${langdir##*/}" $(LOCALE_WHITELIST) || rm -rf $$langdir; \
 597                         fi \
 598                 done; \
 599         done
 600         if [ -d $(TARGET_DIR)/usr/share/X11/locale ]; \
 601         then \
 602                 for lang in $(LOCALE_NOPURGE); \
 603                 do \
 604                         if [ -f $(TARGET_DIR)/usr/share/X11/locale/$$lang/XLC_LOCALE ]; \
 605                         then \
 606                                 echo "$$lang/XLC_LOCALE: $$lang"; \
 607                         fi \
 608                 done > $(TARGET_DIR)/usr/share/X11/locale/locale.dir; \
 609         fi
 610 endef
 611 TARGET_FINALIZE_HOOKS += PURGE_LOCALES
 612 endif
 613
 614 $(TARGETS_ROOTFS): target-finalize
 615
 616 target-finalize: $(PACKAGES)
 617         @$(call MESSAGE,"Finalizing target directory")
 618         $(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 619         rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 620                 $(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
 621                 $(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
 622         find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
 623         find $(TARGET_DIR)/lib $(TARGET_DIR)/usr/lib $(TARGET_DIR)/usr/libexec \
 624                 \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 625 ifneq ($(BR2_PACKAGE_GDB),y)
 626         rm -rf $(TARGET_DIR)/usr/share/gdb
 627 endif
 628 ifneq ($(BR2_PACKAGE_BASH),y)
 629         rm -rf $(TARGET_DIR)/usr/share/bash-completion
 630 endif
 631 ifneq ($(BR2_PACKAGE_ZSH),y)
 632         rm -rf $(TARGET_DIR)/usr/share/zsh
 633 endif
 634         rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
 635         rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
 636         rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
 637         rm -rf $(TARGET_DIR)/usr/share/gtk-doc
 638         -rmdir $(TARGET_DIR)/usr/share 2>/dev/null
 639         $(STRIP_FIND_CMD) | xargs -0 $(STRIPCMD) 2>/dev/null || true
 640         if test -d $(TARGET_DIR)/lib/modules; then \
 641                 find $(TARGET_DIR)/lib/modules -type f -name '*.ko' -print0 | \
 642                 xargs -0 -r $(KSTRIPCMD); fi
 643
 644 # See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
 645 # besides the one in which crash occurred; or SIGTRAP kills my program when
 646 # I set a breakpoint"
 647 ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
 648         find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
 649                 xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 650 endif
 651
 652 # Valgrind needs ld.so with enough information, so only strip
 653 # debugging symbols.
 654         find $(TARGET_DIR)/lib -type f -name 'ld-*.so*' | \
 655                 xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 656         test -f $(TARGET_DIR)/etc/ld.so.conf && \
 657                 { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
 658         test -d $(TARGET_DIR)/etc/ld.so.conf.d && \
 659                 { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true
 660         mkdir -p $(TARGET_DIR)/etc
 661         ( \
 662                 echo "NAME=Buildroot"; \
 663                 echo "VERSION=$(BR2_VERSION_FULL)"; \
 664                 echo "ID=buildroot"; \
 665                 echo "VERSION_ID=$(BR2_VERSION)"; \
 666                 echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
 667         ) >  $(TARGET_DIR)/etc/os-release
 668
 669         @$(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \
 670                 $(call MESSAGE,"Copying overlay $(d)"); \
 671                 rsync -a --ignore-times --keep-dirlinks $(RSYNC_VCS_EXCLUSIONS) \
 672                         --chmod=u=rwX,go=rX --exclude .empty --exclude '*~' \
 673                         $(d)/ $(TARGET_DIR)$(sep))
 674
 675         @$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
 676                 $(call MESSAGE,"Executing post-build script $(s)"); \
 677                 $(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 678
 679 target-post-image: $(TARGETS_ROOTFS) target-finalize
 680         @$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
 681                 $(call MESSAGE,"Executing post-image script $(s)"); \
 682                 $(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 683
 684 source: $(foreach p,$(PACKAGES),$(p)-all-source)
 685
 686 _external-deps: $(foreach p,$(PACKAGES),$(p)-all-external-deps)
 687 external-deps:
 688         @$(MAKE1) -Bs $(EXTRAMAKEARGS) _external-deps | sort -u
 689
 690 # check if download URLs are outdated
 691 source-check: $(foreach p,$(PACKAGES),$(p)-all-source-check)
 692
 693 legal-info-clean:
 694         @rm -fr $(LEGAL_INFO_DIR)
 695
 696 legal-info-prepare: $(LEGAL_INFO_DIR)
 697         @$(call MESSAGE,"Collecting legal info")
 698         @$(call legal-license-file,buildroot,COPYING,COPYING,HOST)
 699         @$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,TARGET)
 700         @$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
 701         @$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,not saved,HOST)
 702         @$(call legal-warning,the Buildroot source code has not been saved)
 703         @cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
 704
 705 legal-info: dirs legal-info-clean legal-info-prepare $(foreach p,$(PACKAGES),$(p)-all-legal-info) \
 706                 $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST)
 707         @cat support/legal-info/README.header >>$(LEGAL_REPORT)
 708         @if [ -r $(LEGAL_WARNINGS) ]; then \
 709                 cat support/legal-info/README.warnings-header \
 710                         $(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
 711                 cat $(LEGAL_WARNINGS); fi
 712         @rm -f $(LEGAL_WARNINGS)
 713         @(cd $(LEGAL_INFO_DIR); \
 714                 find * -type f -exec sha256sum {} + | LC_ALL=C sort -k2 \
 715                         >.legal-info.sha256; \
 716                 mv .legal-info.sha256 legal-info.sha256)
 717         @echo "Legal info produced in $(LEGAL_INFO_DIR)"
 718
 719 show-targets:
 720         @echo $(PACKAGES) $(TARGETS_ROOTFS)
 721
 722 graph-build: $(O)/build/build-time.log
 723         @install -d $(GRAPHS_DIR)
 724         $(foreach o,name build duration,./support/scripts/graph-build-time \
 725                                         --type=histogram --order=$(o) --input=$(<) \
 726                                         --output=$(GRAPHS_DIR)/build.hist-$(o).$(BR_GRAPH_OUT) \
 727                                         $(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
 728         $(foreach t,packages steps,./support/scripts/graph-build-time \
 729                                    --type=pie-$(t) --input=$(<) \
 730                                    --output=$(GRAPHS_DIR)/build.pie-$(t).$(BR_GRAPH_OUT) \
 731                                    $(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
 732
 733 graph-depends-requirements:
 734         @dot -? >/dev/null 2>&1 || \
 735                 { echo "ERROR: The 'dot' program from Graphviz is needed for graph-depends" >&2; exit 1; }
 736
 737 graph-depends: graph-depends-requirements
 738         @$(INSTALL) -d $(GRAPHS_DIR)
 739         @cd "$(CONFIG_DIR)"; \
 740         $(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
 741                 -o $(GRAPHS_DIR)/$(@).dot
 742         dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) \
 743                 -o $(GRAPHS_DIR)/$(@).$(BR_GRAPH_OUT) \
 744                 $(GRAPHS_DIR)/$(@).dot
 745
 746 graph-size:
 747         $(Q)mkdir -p $(GRAPHS_DIR)
 748         $(Q)$(TOPDIR)/support/scripts/size-stats --builddir $(BASE_DIR) \
 749                 --graph $(GRAPHS_DIR)/graph-size.$(BR_GRAPH_OUT) \
 750                 --file-size-csv $(GRAPHS_DIR)/file-size-stats.csv \
 751                 --package-size-csv $(GRAPHS_DIR)/package-size-stats.csv
 752
 753 check-dependencies:
 754         @cd "$(CONFIG_DIR)"; \
 755         $(TOPDIR)/support/scripts/graph-depends -C
 756
 757 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 758
 759 all: menuconfig
 760
 761 endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 762
 763 # configuration
 764 # ---------------------------------------------------------------------------
 765
 766 HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
 767 export HOSTCFLAGS
 768
 769 $(BUILD_DIR)/buildroot-config/%onf:
 770         mkdir -p $(@D)/lxdialog
 771         PKG_CONFIG_PATH="$(HOST_PKG_CONFIG_PATH)" $(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" \
 772             obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
 773
 774 DEFCONFIG = $(call qstrip,$(BR2_DEFCONFIG))
 775
 776 # We don't want to fully expand BR2_DEFCONFIG here, so Kconfig will
 777 # recognize that if it's still at its default $(CONFIG_DIR)/defconfig
 778 COMMON_CONFIG_ENV = \
 779         BR2_DEFCONFIG='$(call qstrip,$(value BR2_DEFCONFIG))' \
 780         KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
 781         KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
 782         KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
 783         BR2_CONFIG=$(BR2_CONFIG) \
 784         BR2_EXTERNAL=$(BR2_EXTERNAL) \
 785         HOST_GCC_VERSION="$(HOSTCC_VERSION)" \
 786         SKIP_LEGACY=
 787
 788 xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
 789         @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 790
 791 gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
 792         @$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
 793
 794 menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
 795         @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 796
 797 nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
 798         @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 799
 800 config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 801         @$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 802
 803 # For the config targets that automatically select options, we pass
 804 # SKIP_LEGACY=y to disable the legacy options. However, in that case
 805 # no values are set for the legacy options so a subsequent oldconfig
 806 # will query them. Therefore, run an additional olddefconfig.
 807
 808 oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 809         @$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
 810
 811 randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 812         @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --randconfig $(CONFIG_CONFIG_IN)
 813         @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 814
 815 allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 816         @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --allyesconfig $(CONFIG_CONFIG_IN)
 817         @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 818
 819 allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 820         @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y $< --allnoconfig $(CONFIG_CONFIG_IN)
 821         @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 822
 823 randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 824         @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 825         @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
 826                 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 827                 $< --randconfig $(CONFIG_CONFIG_IN)
 828         @rm -f $(CONFIG_DIR)/.config.nopkg
 829         @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 830
 831 allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 832         @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 833         @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
 834                 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 835                 $< --allyesconfig $(CONFIG_CONFIG_IN)
 836         @rm -f $(CONFIG_DIR)/.config.nopkg
 837         @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 838
 839 allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 840         @grep -v BR2_PACKAGE_ $(BR2_CONFIG) > $(CONFIG_DIR)/.config.nopkg
 841         @$(COMMON_CONFIG_ENV) SKIP_LEGACY=y \
 842                 KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
 843                 $< --allnoconfig $(CONFIG_CONFIG_IN)
 844         @rm -f $(CONFIG_DIR)/.config.nopkg
 845         @$(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN) >/dev/null
 846
 847 silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 848         $(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
 849
 850 olddefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 851         $(COMMON_CONFIG_ENV) $< --olddefconfig $(CONFIG_CONFIG_IN)
 852
 853 defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 854         @$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
 855
 856 # Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig
 857 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
 858         @$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(TOPDIR)/configs/$@ \
 859                 $< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
 860
 861 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(BR2_EXTERNAL)/configs/%_defconfig outputmakefile
 862         @$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(BR2_EXTERNAL)/configs/$@ \
 863                 $< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
 864
 865 savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 866         @$(COMMON_CONFIG_ENV) $< \
 867                 --savedefconfig=$(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig) \
 868                 $(CONFIG_CONFIG_IN)
 869         @$(SED) '/BR2_DEFCONFIG=/d' $(if $(DEFCONFIG),$(DEFCONFIG),$(CONFIG_DIR)/defconfig)
 870
 871 .PHONY: defconfig savedefconfig
 872
 873 ################################################################################
 874 #
 875 # Cleanup and misc junk
 876 #
 877 ################################################################################
 878
 879 # outputmakefile generates a Makefile in the output directory, if using a
 880 # separate output directory. This allows convenient use of make in the
 881 # output directory.
 882 outputmakefile:
 883 ifeq ($(NEED_WRAPPER),y)
 884         $(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
 885 endif
 886
 887 # printvars prints all the variables currently defined in our
 888 # Makefiles. Alternatively, if a non-empty VARS variable is passed,
 889 # only the variables matching the make pattern passed in VARS are
 890 # displayed.
 891 printvars:
 892         @$(foreach V, \
 893                 $(sort $(if $(VARS),$(filter $(VARS),$(.VARIABLES)),$(.VARIABLES))), \
 894                 $(if $(filter-out environment% default automatic, \
 895                                 $(origin $V)), \
 896                 $(info $V=$($V) ($(value $V)))))
 897
 898 clean:
 899         rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
 900                 $(BUILD_DIR) $(BASE_DIR)/staging \
 901                 $(LEGAL_INFO_DIR) $(GRAPHS_DIR)
 902
 903 distclean: clean
 904 ifeq ($(DL_DIR),$(TOPDIR)/dl)
 905         rm -rf $(DL_DIR)
 906 endif
 907 ifeq ($(O),output)
 908         rm -rf $(O)
 909 endif
 910         rm -rf $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/..config.tmp \
 911                 $(CONFIG_DIR)/.auto.deps $(BR2_EXTERNAL_FILE)
 912
 913 help:
 914         @echo 'Cleaning:'
 915         @echo '  clean                  - delete all files created by build'
 916         @echo '  distclean              - delete all non-source files (including .config)'
 917         @echo
 918         @echo 'Build:'
 919         @echo '  all                    - make world'
 920         @echo '  toolchain              - build toolchain'
 921         @echo
 922         @echo 'Configuration:'
 923         @echo '  menuconfig             - interactive curses-based configurator'
 924         @echo '  nconfig                - interactive ncurses-based configurator'
 925         @echo '  xconfig                - interactive Qt-based configurator'
 926         @echo '  gconfig                - interactive GTK-based configurator'
 927         @echo '  oldconfig              - resolve any unresolved symbols in .config'
 928         @echo '  silentoldconfig        - Same as oldconfig, but quietly, additionally update deps'
 929         @echo '  olddefconfig           - Same as silentoldconfig but sets new symbols to their default value'
 930         @echo '  randconfig             - New config with random answer to all options'
 931         @echo '  defconfig              - New config with default answer to all options'
 932         @echo '                             BR2_DEFCONFIG, if set, is used as input'
 933         @echo '  savedefconfig          - Save current config to BR2_DEFCONFIG (minimal config)'
 934         @echo '  allyesconfig           - New config where all options are accepted with yes'
 935         @echo '  allnoconfig            - New config where all options are answered with no'
 936         @echo '  randpackageconfig      - New config with random answer to package options'
 937         @echo '  allyespackageconfig    - New config where pkg options are accepted with yes'
 938         @echo '  allnopackageconfig     - New config where package options are answered with no'
 939         @echo
 940         @echo 'Package-specific:'
 941         @echo '  <pkg>                  - Build and install <pkg> and all its dependencies'
 942         @echo '  <pkg>-source           - Only download the source files for <pkg>'
 943         @echo '  <pkg>-extract          - Extract <pkg> sources'
 944         @echo '  <pkg>-patch            - Apply patches to <pkg>'
 945         @echo '  <pkg>-depends          - Build <pkg>'\''s dependencies'
 946         @echo '  <pkg>-configure        - Build <pkg> up to the configure step'
 947         @echo '  <pkg>-build            - Build <pkg> up to the build step'
 948         @echo '  <pkg>-graph-depends    - Generate a graph of <pkg>'\''s dependencies'
 949         @echo '  <pkg>-dirclean         - Remove <pkg> build directory'
 950         @echo '  <pkg>-reconfigure      - Restart the build from the configure step'
 951         @echo '  <pkg>-rebuild          - Restart the build from the build step'
 952         $(foreach p,$(HELP_PACKAGES), \
 953                 @echo $(sep) \
 954                 @echo '$($(p)_NAME):' $(sep) \
 955                 $($(p)_HELP_CMDS)$(sep))
 956         @echo
 957         @echo 'Documentation:'
 958         @echo '  manual                 - build manual in all formats'
 959         @echo '  manual-html            - build manual in HTML'
 960         @echo '  manual-split-html      - build manual in split HTML'
 961         @echo '  manual-pdf             - build manual in PDF'
 962         @echo '  manual-text            - build manual in text'
 963         @echo '  manual-epub            - build manual in ePub'
 964         @echo '  graph-build            - generate graphs of the build times'
 965         @echo '  graph-depends          - generate graph of the dependency tree'
 966         @echo '  graph-size             - generate stats of the filesystem size'
 967         @echo '  list-defconfigs        - list all defconfigs (pre-configured minimal systems)'
 968         @echo
 969         @echo 'Miscellaneous:'
 970         @echo '  source                 - download all sources needed for offline-build'
 971         @echo '  source-check           - check selected packages for valid download URLs'
 972         @echo '  external-deps          - list external packages used'
 973         @echo '  legal-info             - generate info about license compliance'
 974         @echo
 975         @echo '  make V=0|1             - 0 => quiet build (default), 1 => verbose build'
 976         @echo '  make O=dir             - Locate all output files in "dir", including .config'
 977         @echo
 978         @echo 'For further details, see README, generate the Buildroot manual, or consult'
 979         @echo 'it on-line at http://buildroot.org/docs.html'
 980         @echo
 981
 982 list-defconfigs:
 983         @echo 'Built-in configs:'
 984         @$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
 985           printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
 986 ifneq ($(wildcard $(BR2_EXTERNAL)/configs/*_defconfig),)
 987         @echo
 988         @echo 'User-provided configs:'
 989         @$(foreach b, $(sort $(notdir $(wildcard $(BR2_EXTERNAL)/configs/*_defconfig))), \
 990           printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
 991 endif
 992         @echo
 993
 994 release: OUT = buildroot-$(BR2_VERSION)
 995
 996 # Create release tarballs. We need to fiddle a bit to add the generated
 997 # documentation to the git output
 998 release:
 999         git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
1000         $(MAKE) O=$(OUT) manual-html manual-text manual-pdf
1001         $(MAKE) O=$(OUT) manual-clean
1002         tar rf $(OUT).tar $(OUT)
1003         gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
1004         bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
1005         rm -rf $(OUT) $(OUT).tar
1006
1007 print-version:
1008         @echo $(BR2_VERSION_FULL)
1009
1010 include docs/manual/manual.mk
1011 -include $(BR2_EXTERNAL)/docs/*/*.mk
1012
1013 .PHONY: $(noconfig_targets)
1014
1015 endif #umask