| blob | 6c3815c9f2bad5f356fdd29c101e74cc92f5eadd |
1 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
3 * dis-buf.c (buffer_read_memory): Change `length' param and all int
4 vars to unsigned.
6 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
8 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
9 (print_insn_ppi): Likewise.
10 (print_insn_shx): Use info->mach to select appropriate insn set.
11 Add support for sh-dsp. Remove FD_REG_N support.
12 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
13 (sh_arg_type): Likewise. Remove FD_REG_N.
14 (sh_dsp_reg_nums): New enum.
15 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
16 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
17 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
18 (arch_sh3_dsp_up): Likewise.
19 (sh_opcode_info): New field: arch.
20 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
21 D_REG_N. Fill in arch field. Add sh-dsp insns.
23 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
25 * arm-dis.c: Change flavor name from atpcs-special to
26 special-atpcs to prevent name conflict in gdb.
27 (get_arm_regname_num_options, set_arm_regname_option,
28 get_arm_regnames): New functions. API to access the several
29 flavor of register names. Note: Used by gdb.
30 (print_insn_thumb): Use the register name entry from the currently
31 selected flavor for LR and PC.
33 2000-02-10 Nick Clifton <nickc@cygnus.com>
35 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
36 classes.
37 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
38 "mulsh.h" instructions.
39 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
40 classes.
41 (print_insn_mcore): Add support for little endian targets.
42 Add support for MULSH and OPSR classes.
44 2000-02-07 Nick Clifton <nickc@cygnus.com>
46 * arm-dis.c (parse_arm_diassembler_option): Rename again.
47 Previous delat did not take.
49 2000-02-03 Timothy Wall <twall@redhat.com>
51 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
52 to adjust target address bounds checking and calculate the
53 appropriate octet offset into data.
55 2000-01-27 Nick Clifton <nickc@redhat.com>
57 * arm-dis.c: (parse_disassembler_option): Rename to
58 parse_arm_disassembler_option and allow to be exported.
60 * disassemble.c (disassembler_usage): New function: Print out any
61 target specific disassembler options.
62 Call arm_disassembler_options() if the ARM architecture is being
63 supported.
65 * arm-dis.c (NUM_ELEM): Define this macro if not already
66 defined.
67 (arm_regname): New struct type for ARM register names.
68 (arm_toggle_regnames): Delete.
69 (parse_disassembler_option): Use register name structure.
70 (print_insn): New function: Combines duplicate code found in
71 print_insn_big_arm and print_insn_little_arm.
72 (print_insn_big_arm): Call print_insn.
73 (print_insn_little_arm): Call print_insn.
74 (print_arm_disassembler_options): Display list of supported,
75 ARM specific disassembler options.
77 2000-01-27 Thomas de Lellis <tdel@windriver.com>
79 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
80 ARM_STT_16BIT flag as Thumb code symbols.
82 * arm-dis.c (printf_insn_little_arm): Ditto.
84 2000-01-25 Thomas de Lellis <tdel@windriver.com>
86 * arm-dis.c (printf_insn_thumb): Prevent double dumping
87 of raw thumb instructions.
89 2000-01-20 Nick Clifton <nickc@cygnus.com>
91 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
93 2000-01-03 Nick Clifton <nickc@cygnus.com>
95 * arm-dis.c (streq): New macro.
96 (strneq): New macro.
97 (force_thumb): ew local variable.
98 (parse_disassembler_option): New function: Parse a single, ARM
99 specific disassembler command line switch.
100 (parse_disassembler_option): Call parse_disassembler_option to
101 parse individual command line switches.
102 (print_insn_big_arm): Check force_thumb.
103 (print_insn_little_arm): Check force_thumb.
105 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
107 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
109 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
111 * m10300-opc.c, m10300-dis.c: Add am33 support.
113 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
115 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
116 (print_insn_hppa): Handle 'B' operand.
118 1999-11-22 Nick Clifton <nickc@cygnus.com>
120 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
122 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
124 * mips-opc.c (I5): New.
125 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
126 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
127 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
129 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
131 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
132 * arm-opc.h (print_insn_arm): Added comment documenting
133 the 'X' format just added to arm-dis.c.
135 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
137 * mips-opc.c (la): Create a version that just uses addiu directly.
138 (dla): Expand to daddiu if possible.
140 1999-11-11 Nick Clifton <nickc@cygnus.com>
142 * mips-opc.c: Add ssnop pattern.
144 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
146 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
148 1999-10-29 Nick Clifton <nickc@cygnus.com>
150 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
151 (d30v_format_tab): Define the SHORT_AR format.
153 1999-10-28 Nick Clifton <nickc@cygnus.com>
155 * mcore-dis.c: Remove spurious code introduced in previous delta.
157 1999-10-27 Scott Bambrough <scottb@netwinder.org>
159 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
161 1999-10-18 Michael Meissner <meissner@cygnus.com>
163 * alpha-opc.c (alpha_operands): Fill in missing initializer.
164 (alpha_num_operands): Convert to unsigned.
165 (alpha_num_opcodes): Ditto.
166 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
167 (insert_rca): Ditto.
168 (insert_za): Ditto.
169 (insert_zb): Ditto.
170 (insert_zc): Ditto.
171 (extract_bdisp): Ditto.
172 (extract_jhint): Ditto.
173 (extract_ev6hwjhint): Ditto.
175 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
177 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
178 'co', '@'.
180 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
182 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
184 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
186 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
187 rac/rachi instructions.
188 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
189 slae, st and st2w.
191 1999-10-04 Doug Evans <devans@casey.cygnus.com>
193 * fr30-asm.c,fr30-desc.h: Rebuild.
194 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
195 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
197 1999-09-29 Nick Clifton <nickc@cygnus.com>
199 * sh-opc.h: Fix bit patterns for several load and store
200 instructions.
202 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
204 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
205 cleaner code using completer prefixes. Add 'Y'.
207 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
209 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
211 * hppa-dis.c (extract_22): New function.
213 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
215 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
217 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
219 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
221 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
223 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
225 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
227 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
229 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
231 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
233 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
235 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
236 operand.
238 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
240 * hppa-dis.c: (print_insn_hppa): Add missing break after
241 FP register case.
243 * hppa-dis.c: Finish constifying various completers, register
244 names, etc etc.
246 1999-09-14 Michael Meissner <meissner@cygnus.com>
248 * configure.in (Canonicalization of target names): Remove adding
249 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
250 generates $ac_config_sub with a ${CONFIG_SHELL} already.
251 * configure: Regenerate.
253 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
255 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
257 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
259 1999-09-07 Nick Clifton <nickc@cygnus.com>
261 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
262 names for the mulu and muls patterns.
264 1999-09-04 Steve Chamberlain <sac@pobox.com>
266 * pj-opc.c: New file.
267 * pj-dis.c: New file.
268 * disassemble.c (disassembler): Handle bfd_arch_pj.
269 * configure.in: Handle bfd_pj_arch.
270 * Makefile.am: Rebuild dependencies.
271 (CFILES): Add pj-dis.c and pj-opc.c.
272 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
273 * configure, Makefile.in: Rebuild.
275 1999-09-04 H.J. Lu <hjl@gnu.org>
277 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
279 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
281 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
283 1999-08-04 Doug Evans <devans@casey.cygnus.com>
285 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
286 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
287 * m32r-opinst.c: Rebuild.
289 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
291 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
292 register args by 'f'.
294 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
296 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
297 extract_10U_store): New.
298 (print_insn_hppa): Add new completers.
300 * hppa-dis.c (signed_unsigned_names,mix_half_names,
301 saturation_names): New.
302 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
304 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
306 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
308 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
309 to decide to print a space.
311 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
313 * i386-dis.c: Add AMD athlon instruction support.
315 1999-08-10 Ian Lance Taylor <ian@zembu.com>
317 From Wally Iimura <iimura@microunity.com>:
318 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
319 overflow at end of address space.
320 (generic_print_address): Use sprintf_vma.
322 1999-08-08 Ian Lance Taylor <ian@zembu.com>
324 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
325 MKDEP. Rebuild dependencies.
326 * Makefile.in: Rebuild.
328 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
330 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
331 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
332 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
333 (print_insn_hppa): Add 64 bit condition completers.
335 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
337 * hppa-dis.c (print_insn_hppa): Change condition args to use
338 '?' prefix.
340 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
342 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
343 code.
345 1999-07-21 Ian Lance Taylor <ian@zembu.com>
347 From Mark Elbrecht:
348 * configure.bat: Remove; obsolete.
350 1999-07-11 Ian Lance Taylor <ian@zembu.com>
352 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
353 (generic_strcat_address): Add cast to avoid warning.
354 * i386-dis.c: Initialize all structure fields to avoid warnings.
355 Add ATTRIBUTE_UNUSED as appropriate.
357 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
359 * sparc-dis.c (print_insn_sparc): Differentiate between
360 addition and oring when guessing symbol for comment.
362 1999-07-05 Nick Clifton <nickc@cygnus.com>
364 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
365 constant.
367 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
369 * i386-dis.c: Mention intel mode specials in macro char comment.
371 1999-06-21 Ian Lance Taylor <ian@zembu.com>
373 * alpha-dis.c: Don't include <stdlib.h>.
374 * arm-dis.c: Include "sysdep.h".
375 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
376 "sysdep.h".
377 * Makefile.am: Rebuild dependencies.
378 * Makefile.in: Rebuild.
380 1999-06-16 Nick Clifton <nickc@cygnus.com>
382 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
383 SWIs.
385 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
387 * arm-dis.c (arm_regnames): Turn into a pointer to a register
388 name set.
389 (arm_regnames_standard): New variable: Array of ARM register
390 names according to ARM instruction set nomenclature.
391 (arm_regnames_apcs): New variable: Array of ARM register names
392 according to ARM Procedure Call Standard.
393 (arm_regnames_raw): New variable: Array of ARM register names
394 using just 'r' and the register number.
395 (arm_toggle_regnames): New function: Toggle the chosen register set
396 naming scheme.
397 (parse_disassembler_options): New function: Parse any target
398 disassembler command line options.
399 (print_insn_big_arm): Call parse_disassembler_options if any
400 are defined.
401 (print_insn_little_arm): Call parse_disassembler_options if any
402 are defined.
404 1999-06-13 Ian Lance Taylor <ian@zembu.com>
406 * i386-dis.c (FWAIT_OPCODE): Define.
407 (used_prefixes): New static variable.
408 (fetch_data): Don't print an error message if we have already
409 fetched some bytes successfully.
410 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
411 (prefix_name): New static function.
412 (print_insn_i386): If setjmp fails, indicating a data error, but
413 we have managed to fetch some bytes, print the first one as a
414 prefix or a .byte pseudo-op. If fwait is followed by a non
415 floating point instruction, print the first prefix. Set
416 used_prefixes when prefixes are used. If any prefixes were not
417 used after disassembling the instruction, print the first prefix
418 instead of printing the instruction.
419 (putop): Set used_prefixes when prefixes are used.
420 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
421 (OP_DIR, OP_SIMD_Suffix): Likewise.
423 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
425 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
426 Support signx %reg, clruw %reg.
428 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
430 * sparc-opc.c: Add aliases Solaris as supports.
432 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
434 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
435 * Makefile.in: Regenerated.
437 1999-06-03 Philip Blundell <philb@gnu.org>
439 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
440 when target is PC-relative.
442 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
444 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
445 MOVE MACSR,CCR.
447 * m68k-dis.c (fetch_arg): Add places `n', `o'.
449 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
450 Add mcf5206e to appropriate instructions.
451 Add alias for MAC, MSAC.
453 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
454 `N'.
456 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
457 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
459 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
461 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
463 * i386-dis.c (Ed): Define.
464 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
465 (Rw): Remove.
466 (OP_rm): Rename to OP_Rd.
467 (ONE): Remove.
468 (OP_ONE): Remove.
469 (putop): Add const to template and p.
470 (print_insn_x86): Delete.
471 (print_insn_i386): Merge old function print_insn_x86. Add const
472 to dp.
473 (struct dis386): Add const to name.
474 (dis386_att, dis386_intel): Add const.
475 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
476 (names32, names16, names8, names_seg, index16): Add const.
477 (grps, prefix_user_table, float_reg): Add const.
478 (float_mem_att, float_mem_intel): Add const.
479 (oappend): Add const to s.
480 (OP_REG): Add const to s.
481 (ptr_reg): Add const to s.
482 (dofloat): Add const to dp.
483 (OP_C): Don't skip modrm, it's now done in OP_Rd.
484 (OP_D): Ditto.
485 (OP_T): Ditto.
486 (OP_Rd): Check for valid mod. Call Op_E to print.
487 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
488 (OP_MS): Check for valid mod. Call Op_EM to print.
489 (OP_3DNowSuffix): Set obufp and use oappend rather than
490 strcat. Call BadOp() for errors.
491 (OP_SIMD_Suffix): Likewise.
492 (BadOp): New function.
494 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
496 * i386-dis.c (dis386_intel): Remove macro chars, except for
497 jEcxz. Change cWtR and cRtd to cW and cR.
498 (dis386_twobyte_intel): Remove macro chars here too.
499 (putop): Handle R and W macros for intel mode.
501 * i386-dis.c (SIMD_Fixup): New function.
502 (dis386_twobyte_att): Use it on movlps and movhps, and change
503 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
504 (dis386_twobyte_intel): Same here.
506 * i386-dis.c (Av): Remove.
507 (Ap): remove lptr.
508 (lptr): Remove.
509 (OPSIMD): Define.
510 (OP_SIMD_Suffix): New function.
511 (OP_DIR): Remove dead code.
512 (eAX_reg..eDI_reg): Renumber.
513 (onebyte_has_modrm): Table numbering comments.
514 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
515 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
516 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
517 and handle SIMD cmp insns in OP_SIMD_Suffix.
518 (info->bytes_per_line): Bump from 5 to 6.
519 (OP_None): Remove.
520 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
521 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
523 PIII SIMD support from Doug Ledford <dledford@redhat.com>
524 * i386-dis.c (XM, EX, None): Define.
525 (OP_XMM, OP_EX, OP_None): New functions.
526 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
527 (GRP14): Rename to GRPAMD.
528 (GRP*): Add USE_GROUPS flag.
529 (PREGRP*): Define.
530 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
531 (twobyte_has_modrm): Add SIMD entries.
532 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
533 (grps): Add SIMD insns.
534 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
535 oappend repz if uses_f3_prefix. Add code to handle new groups for
536 SIMD insns.
538 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
539 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
540 operand from Av to Jv.
542 1999-05-07 Nick Clifton <nickc@cygnus.com>
544 * mcore-dis.c (print_insn_mcore): Use .short to display
545 unidentified instructions, not .word.
547 1999-04-26 Tom Tromey <tromey@cygnus.com>
549 * aclocal.m4, configure: Updated for new version of libtool.
551 1999-04-14 Doug Evans <devans@casey.cygnus.com>
553 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
554 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
556 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
558 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
559 instructions.
561 1999-04-10 Doug Evans <devans@casey.cygnus.com>
563 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
564 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
566 1999-04-06 Ian Lance Taylor <ian@zembu.com>
568 * opintl.h (LC_MESSAGES): Never define.
570 1999-04-04 Ian Lance Taylor <ian@zembu.com>
572 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
573 (separator_char, scale_char): Likewise.
574 (print_insn_x86): Likewise.
575 (print_insn_i386): Likewise. Add declaration.
577 1999-03-26 Doug Evans <devans@casey.cygnus.com>
579 * fr30-dis.c: Rebuild.
580 * m32r-dis.c: Rebuild.
582 1999-03-23 Ian Lance Taylor <ian@zembu.com>
584 * m68k-opc.c: Change compare instructions to use "@s" rather than
585 ";s" when used with an immediate operand.
587 1999-03-22 Doug Evans <devans@casey.cygnus.com>
589 * cgen-opc.c (cgen_set_cpu): Delete.
590 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
591 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
592 Rebuild.
593 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
594 Rebuild.
595 * po/opcodes.pot: Rebuild.
597 1999-03-16 Martin Hunt <hunt@cygnus.com>
599 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
601 1999-03-11 Doug Evans <devans@casey.cygnus.com>
603 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
604 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
605 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
606 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
607 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
608 * m32r-opinst.c: Rebuild.
610 1999-02-25 Doug Evans <devans@casey.cygnus.com>
612 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
613 (cgen_hw_lookup_by_num): Rewrite.
614 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
615 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
616 * m32r-opinst.c: Rebuild.
618 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
620 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
621 (insert_jhint): Fix insertion mask.
622 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
624 1999-02-10 Doug Evans <devans@casey.cygnus.com>
626 * Makefile.in: Rebuild.
628 1999-02-09 Doug Evans <devans@casey.cygnus.com>
630 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
631 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
632 * Makefile.am: Remove references to them.
633 (HFILES): Add fr30-desc.h,m32r-desc.h.
634 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
635 m32r-opinst.c.
636 (ALL_MACHINES): Update.
637 * configure.in: Redo handling of cgen_files.
638 (bfd_i960_arch): Delete i960c-*.lo files.
639 * configure: Regenerate.
640 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
641 (hash_insn_array): Rewrite.
642 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
643 (hash_insn_array): Rewrite.
644 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
645 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
646 (cgen_lookup_get_insn_operands): Ditto.
647 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
648 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
649 * po/POTFILES.in: Rebuild.
650 * po/opcodes.pot: Rebuild.
652 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
654 * Makefile.am: Rebuild dependencies.
655 (HFILES): Add fr30-opc.h.
656 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
657 * Makefile.in: Rebuild.
659 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
660 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
661 AC_PROG_INSTALL.
662 * acconfig.h: Remove.
663 * configure: Rebuild with current autoconf/automake.
664 * aclocal.m4: Likewise.
665 * config.in: Likewise.
666 * Makefile.in: Likewise.
668 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
670 * m68k-opc.c: Correct move (not movew) to status word on 5200.
672 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
674 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
675 * i386-dis.c (x_mode): Define.
676 (dis386): Remove.
677 (dis386_att): New.
678 (dis386_intel): New.
679 (dis386_twobyte): Remove.
680 (dis386_twobyte_att): New.
681 (dis386_twobyte_intel): New.
682 (print_insn_x86): Use new arrays.
683 (float_mem): Remove.
684 (float_mem_intel): New.
685 (float_mem_att): New.
686 (dofloat): Use new float_mem arrays.
687 (print_insn_i386_att): New.
688 (print_insn_i386_intel): New.
689 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
690 (putop): Handle intel syntax.
691 (OP_indirE): Handle intel syntax.
692 (OP_E): Handle intel syntax.
693 (OP_I): Handle intel syntax.
694 (OP_sI): Handle intel syntax.
695 (OP_OFF): Handle intel syntax.
699 1999-01-27 Doug Evans <devans@casey.cygnus.com>
701 * fr30-opc.h,fr30-opc.c: Rebuild.
702 * i960c-opc.h,i960c-opc.c: Rebuild.
703 * m32r-opc.c: Rebuild.
705 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
707 * hppa-dis.c: revert HP merge changes until HP gives us
708 an updated file.
710 1999-01-19 Nick Clifton <nickc@cygnus.com>
712 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
713 offsets as well as symbloic address.
715 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
717 * hppa-dis.c: fix comments and some indentation.
719 1999-01-12 Doug Evans <devans@casey.cygnus.com>
721 * fr30-opc.c,i960c-opc.c: Regenerate.
723 1999-01-11 Doug Evans <devans@casey.cygnus.com>
725 * fr30-opc.c: Regenerate.
727 1999-01-06 Doug Evans <devans@casey.cygnus.com>
729 * m32r-dis.c: Regenerate.
731 1999-01-05 Doug Evans <devans@casey.cygnus.com>
733 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
734 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
735 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
737 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
739 * configure.in: Require autoconf 2.12.1 or higher.
741 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
743 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
745 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
747 * fr30-opc.c: Regenerated.
749 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
751 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
753 1998-12-15 Dave Brolley <brolley@cygnus.com>
755 * fr30-opc.c,fr30-opc.h: Regenerated.
757 1998-12-14 Dave Brolley <brolley@cygnus.com>
759 * fr30-opc.c,fr30-opc.h: Regenerated.
761 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
763 * fr30-opc.c,fr30-opc.h: Regenerated.
765 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
767 * m32r-opc.c: Regenerate.
769 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
771 * dis-buf.c (generic_strcat_address): reformat to GNU coding
772 conventions. change sprintf call to an sprintf_vma call.
774 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
776 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
778 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
780 The following changes were made by
781 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
782 David Taylor <taylor@texas.cygnus.com>, and
783 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
784 merge in changes by HP; HP did not create ChangeLog entries.
786 * dis-buf.c (generic_strcat_address): new function.
788 * hppa-dis.c: Changes to improve hppa disassembly.
789 Changed formatting in : reg_names, fp_reg_names,control_reg,
790 New variables : sign_extension_names, deposit_names, conversion_names
791 float_test_names, compare_cond_names_double, add_cond_names_double,
792 logical_cond_names_double, unit_cond_names_double,
793 branch_push_pop_names, saturation_names, shift_names, mix_names,
794 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
795 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
796 (fput_const): renamed as fput_hex_const
797 (print_insn_hppa):
798 - use the macros fputs_filtered and
799 fput_decimal_const whenever possible; calls to sign_extend require
800 2 params -- add a missing second param of 0.
801 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
802 architecture version number of current machine. HP folks are
803 trying to handle situation where the target program was compiled
804 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
805 visa versa.
806 - added new cases : 'g', 'B', 'm'
807 - added cases specifically for PA 2.0
808 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
809 - calls to fput_const become calls to fput_hex_const
811 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
813 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
814 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
815 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
816 * Makefile.in: Rebuilt.
817 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
818 i960-dis.c to ta.
819 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
820 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
822 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
824 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
826 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
828 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
830 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
831 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
833 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
835 * fr30-opc.c: Regenerate.
837 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
839 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
841 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
843 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
845 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
847 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
849 1998-11-30 Doug Evans <devans@casey.cygnus.com>
851 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
852 CGEN_INSN_BASE_VALUE.
853 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
854 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
856 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
858 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
860 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
862 * fr30-asm.c,fr30-dis.c: Regenerated.
864 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
866 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
868 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
870 * fr30-opc.c: Regenerated.
872 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
874 * fr30-opc.c: Regenerated.
875 * fr30-opc.h: Regenerated.
876 * fr30-dis.c: Regenerated.
877 * fr30-asm.c: Regenerated.
879 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
881 * mips-opc.c (sync.p,sync.l): Swap insn values.
883 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
885 * fr30-opc.c: Regenerate.
887 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
889 * fr30-opc.c: Regenerated.
890 * fr30-opc.h: Regenerated.
892 1998-11-18 Doug Evans <devans@casey.cygnus.com>
894 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
895 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
897 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
899 * fr30-opc.c: Regenerated.
901 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
903 * fr30-opc.c: Regenerated.
904 * fr30-opc.h: Regenerated.
905 * fr30-dis.c: Regenerated.
906 * fr30-asm.c: Regenerated.
908 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
910 * po/opcodes.pot: Regenerated.
911 * fr30-opc.c: Regenerated.
912 * fr30-opc.h: Regenerated.
913 * fr30-dis.c: Regenerated.
914 * fr30-asm.c: Regenerated.
916 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
918 * disassemble.c (disassembler): Add support for FR30 target.
920 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
922 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
923 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
925 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
927 * po/opcodes.pot: Regenerate.
928 * po/POTFILES.in: Regenerate.
929 * fr30-opc.c: Regenerate.
930 * fr30-opc.h: Regenerate.
932 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
934 * m32r-asm.c: Regenerate.
936 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
938 * configure.in: Added case for bfd_fr30_arch.
939 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
940 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
941 (CLEANFILES): Added stamp-fr30.
942 (FR30_DEPS): Added.
943 * fr30-asm.c: New file.
944 * fr30-dis.c: New file.
945 * fr30-opc.c: New file.
946 * fr30-opc.h: New file.
947 * po/POTFILES.in: Regenerated
948 * po/opcodes.pot: Regenerated
950 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
952 * configure.in: detect cygwin* instead of cygwin32*
953 * configure: regenerate
955 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
957 * mips-opc.c (IS_M): Added.
959 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
961 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
963 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
965 * m32r-opc.h,m32r-opc.c: Regenerate.
967 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
969 * i386-dis.c (OP_3DNowSuffix): New static function.
970 (OPSUF): Define.
971 (GRP14): Define.
972 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
973 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
974 (insn_codep): New static variable.
975 (print_insn_x86): Init insn_codep after prefixes.
976 (grps): Add GRP14 entries for prefetch, prefetchw.
977 (OP_REG): Reformat.
979 From Jeff B Epler <jepler@usgs.gov>
980 * i386-dis.c (Suffix3DNow): New table.
982 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
984 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
986 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
988 * d10v-dis.c (print_operand): If num is nonzero, then
989 add OPERAND_ACC1, not OPERAND_ACC0.
991 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
993 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
994 insns.
996 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
998 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
999 class.
1001 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1003 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1005 1998-09-09 Michael Meissner <meissner@cygnus.com>
1007 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1008 to/from SPRs.
1010 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1012 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1013 object files.
1014 (print_insn_little_arm): Detect Thumb symbols in elf object
1015 files.
1017 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1019 * alpha-dis.c (print_insn_alpha): Use the machine type to
1020 decide which PALcode set to include.
1022 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1024 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1026 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1028 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1029 MSUB and MSUBS instructions.
1031 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1033 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1034 operand name macros.
1036 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1038 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1039 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1040 +, -, and d for ColdFire.
1042 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1043 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1044 (extract_mbe): Likewise.
1046 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1048 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1050 * m10300-opc.c: First cut at UDF instructions.
1052 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1054 * m32r-opc.c: Regenerate (remove semantic descriptions).
1056 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1058 * arm-dis.c (print_insn_big_arm): Fix indentation.
1059 (print_insn_little_arm): Likewise.
1061 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1063 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1064 attributes.
1065 (print_insn_little_arm): Likewise.
1067 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1069 Move all global state data into opcode table struct, and treat
1070 opcode table as something that is "opened/closed".
1071 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1072 (cgen_asm_init): Delete.
1073 (cgen_set_parse_operand_fn): New function.
1074 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1075 (cgen_dis_init): Delete.
1076 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1077 (cgen_current_{opcode_table_mach,endian}): Delete.
1078 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1080 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1082 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1083 instructions.
1085 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1087 * m10300-opc.c: Add entries for "no_match_operands" field in
1088 the opcode table.
1090 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1092 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1094 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1096 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1098 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1100 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1101 the first prefix.
1102 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1103 than `fnstsw %eax'.
1104 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1105 will be masked later.
1107 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1109 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1111 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1113 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1115 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1117 * m10300-dis.c: Only recognize instructions from the currently
1118 selected machine.
1119 * m10300-opc.c: Add field indicating the particular variant of
1120 the mn10300 each instruction is available on.
1122 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1124 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1125 * Makefile.am: Rebuild dependencies.
1126 (CFILES): Add vax-dis.c.
1127 (ALL_MACHINES): Add vax-dis.lo.
1128 * aclocal.m4: Rebuild with current libtool.
1129 * configure, Makefile.in: Rebuild.
1131 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1133 * vax-dis.c: New file, from work by Pauline Middelink
1134 <middelin@polyware.iaf.nl>.
1135 * disassemble.c (ARCH_vax): Define if ARCH_all.
1136 (disassembler): Add case for ARCH_vax.
1137 * makefile.vms: Support compilation on vms/vax.
1139 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1141 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1142 related to sign extension and the size of ints.
1144 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1146 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1147 instructions. Support (sp) addressing mode by expanding it into
1148 (0,sp).
1150 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1152 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1154 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1156 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1158 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1160 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1161 sysexit.
1163 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1165 * mips-dis.c (print_insn_little_mips): Previously, instruction
1166 printing references the symbol table to determine whether the
1167 instruction resides in a block regular instructions or mips16
1168 instructions. However, when the disassembler gets used in other
1169 environments where the symbol table is not present, we no longer
1170 rely in the symbol table, rather, use the low bit of the
1171 instructions address to guess. There should be no change for usage
1172 of the disassembler in host based programs, gdb, objdump.
1173 (print_insn_big_mips): ditto.
1174 (print_insn_mips): ditto
1176 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1178 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1180 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1182 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1184 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1186 * i386-dis.c (index16): Add '%' to register names. Use ','
1187 instead of '+'.
1189 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1191 * i386-dis.c: Don't print opcode suffix when we can figure out the
1192 size (and gas can!) by register operands, or from the default
1193 size.
1194 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1195 macro to 'E'.
1196 (dis386, dis386_twobyte, grps): Use new suffix macros.
1197 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1198 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1199 order of cmps operands to agree with Intel docs. Correct operand
1200 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1201 agree with Intel docs.
1202 (print_insn_x86): Print orphan fwait before other prefixes.
1203 Return correct byte count for orphan fwait with prefixes. Don't
1204 print `bound' operands in reverse order.
1205 (ckprefix): Stop accumulating prefixes if we get fwait.
1206 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1208 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1210 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1211 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1213 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1215 Fix problems when bfd_vma is wider than long.
1216 * i386-dis.c: Make op_address and start_pc unsigned.
1217 (set_op): Make parameter unsigned.
1218 (print_insn_x86): Cast to bfd_vma when passing a value to
1219 print_address_func.
1220 * ns32k-dis.c (CORE_ADDR): Don't define.
1221 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1222 bfd_scan_vma to read back address.
1223 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1224 to format it.
1225 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1226 (NEXTULONG): New definition.
1227 (print_insn_m68k): Avoid overflow when computing third argument of
1228 print_insn_arg.
1229 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1230 Use disp instead of val to store offset values.
1231 (print_indexed): Use base_disp instead of word to store base
1232 displacement, to avoid overflow.
1233 * m10300-dis.c (disassemble): Cast value to long when computing
1234 pc-relative address, to get correct sign extension.
1236 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1238 * m32r-opc.c: Regenerate.
1240 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1242 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1243 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1245 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1247 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1249 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1251 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1252 functions to void.
1253 (OP_DSreg): Rename from OP_DSSI.
1254 (OP_ESreg): Rename from OP_ESDI.
1255 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1256 (DSBX): Define.
1257 (append_seg): Rename from append_prefix.
1258 (ptr_reg): New function.
1259 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1260 Add DSBX for xlat.
1261 (PREFIX_ADDR): Rename from PREFIX_ADR.
1262 (float_reg): Add non-broken opcodes for people who don't want
1263 UNIXWARE_COMPAT.
1265 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1267 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1268 68000/68008/68010.
1270 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1272 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1274 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1276 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1277 0; produce error message for shifts of size 32 (or 64 for 64-bit
1278 shifts), because the hardware doesn't support them.
1280 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1282 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1283 LONG_2, LONG_2b formats to use this new operand.
1285 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1287 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1289 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1291 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1292 endian data support.
1294 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1296 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1297 and SHORT_B3b formats to use Rb instead of Ra.
1299 Add FLAG_MUL16 to MUL2XH opcode.
1301 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1302 to existing 1.1.1 parallelisation prohibition procedure.
1304 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1306 * m32r-asm.c,m32r-dis.c: Regenerate.
1308 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1310 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1311 with a shift count of 0.
1313 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1315 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1316 (cgen_hw_lookup_by_num): New function.
1318 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1320 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1322 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1324 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1325 as big-endian on SPARClite.
1327 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1329 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1331 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1333 * po/Make-in (install-info): New target.
1335 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1337 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1338 * configure: Rebuild.
1340 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1342 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1343 variety of ISA2 instructions to set bottom ten bits of trap code.
1345 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1347 * Makefile.am (config.status): Add explicit target so that
1348 config.status depends upon bfd/configure.in.
1349 * Makefile.in: Rebuild.
1351 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1353 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1354 instructions to set bottom ten bits of break code.
1355 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1356 for above optional argument.
1358 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1360 * makefile.vms: Run dec c with /nodebug.
1362 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1364 * Makefile.in: Rebuilt.
1365 * Makefile.am: Regenerated dependencies with mkdep.
1367 * opintl.h (_): Define as dgettext.
1369 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1371 * cgen-asm.c: Internationalised.
1372 * m32r-asm.c: Internationalised.
1373 * m32r-dis.c: Internationalised.
1374 * m32r-opc.c: Internationalised.
1376 * aclocal.m4: Regenerated.
1377 * configure: Regenerated.
1378 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1379 * Makefile.in: Rebuild.
1380 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1381 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1383 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1385 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1386 after AC_PROG_CC.
1387 * aclocal.m4, configure: Rebuild with current tools.
1389 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1391 * opintl.h: New file - contains internationalisation macros used
1392 by source files in this directory.
1393 * po/: New subdirectory - contains internationalisation files.
1394 * po/Make-in: New file - Makefile constructor.
1395 * po/POTFILES.in: New file - list of files in opcodes directory
1396 that should be scan for internationalisation macros.
1397 * po/opcodes.pot: New file - list of internationisation strings
1398 found in files mentioned in po/POTFILES.in.
1399 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1400 entry. Add intl directory to include paths.
1401 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1402 HAVE_STRCPY, HAVE_LC_MESSAGES
1403 * configure.in: Add rule to build Makefile in po subdirectory.
1404 * Makefile.in: Rebuilt.
1405 * aclocal.m4: Rebuilt.
1406 * config.in: Rebuilt.
1407 * configure: Rebuilt.
1408 * alpha-opc.c: Internationalised.
1409 * arc-dis.c: Internationalised.
1410 * arc-opc.c: Internationalised.
1411 * arm-dis.c: Internationalised.
1412 * cgen-asm.c: Internationalised.
1413 * d30v-dis.c: Internationalised.
1414 * dis-buf.c: Internationalised.
1415 * h8300-dis.c: Internationalised.
1416 * h8500-dis.c: Internationalised.
1417 * i386-dis.c: Internationalised.
1418 * m10200-dis.c: Internationalised.
1419 * m10300-dis.c: Internationalised.
1420 * m68k-dis.c: Internationalised.
1421 * m88k-dis.c: Internationalised.
1422 * mips-dis.c: Internationalised.
1423 * ns32k-dis.c: Internationalised.
1424 * opintl.h: Internationalised.
1425 * ppc-opc.c: Internationalised.
1426 * sparc-dis.c: Internationalised.
1427 * v850-dis.c: Internationalised.
1428 * v850-opc.c: Internationalised.
1430 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1432 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1433 (asm_hash_table_entries): New variable.
1434 (cgen_asm_init): Free asm_hash_table_entries.
1435 (hash_insn_array,hash_insn_list): New functions.
1436 (build_asm_hash_table): Use them. Hash macro insns as well.
1437 (cgen_asm_lookup_insn): Update.
1438 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1439 (dis_hash_table_entries): New variable.
1440 (cgen_dis_init): Free dis_hash_table_entries.
1441 (hash_insn_array,hash_insn_list): New functions.
1442 (build_dis_hash_table): Use them. Hash macro insns as well.
1443 (cgen_dis_lookup_insn): Update.
1444 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1445 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1446 (cgen_macro_insn_count): New function.
1447 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1449 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1451 * i386-dis.c (OP_DSSI): Print segment override.
1453 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1455 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1456 operator.
1458 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1460 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1461 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1462 * configure.in: Define and substitute WIN32LDFLAGS and
1463 WIN32LIBADD.
1464 * aclocal.m4: Rebuild with new libtool.
1465 * configure, Makefile.in: Rebuild.
1467 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1469 * m32r-opc.c: Regenerate.
1471 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1473 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1474 before trying to copy it.
1475 * Makefile.in: Rebuild.
1477 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1479 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1481 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1483 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1484 from an arbitrary valid buffer instead of fetching them on demand
1485 using fetch_data().
1486 (invalid_float): use bit_extract_simple() instead of bit_extract().
1488 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1490 From H.J. Lu <hjl@gnu.org>:
1491 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1492 to Ev for both.
1494 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1496 * Branched binutils 2.9.
1498 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1500 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1501 disassembling last 4 bytes of a section.
1503 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1505 Fix some gcc -Wall warnings:
1506 * arc-dis.c (print_insn): Add casts to avoid warnings.
1507 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1508 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1509 * m10200-dis.c (disassemble): Likewise.
1510 * m10300-dis.c (disassemble): Likewise.
1511 * ns32k-dis.c (print_insn_ns32k): Likewise.
1512 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1513 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1514 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1515 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1516 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1517 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1518 * tic80-dis.c (print_one_instruction): Likewise.
1519 * w65-dis.c (print_operand): Likewise.
1520 * z8k-dis.c (fetch_data): Likewise.
1521 * a29k-dis.c: Add return type for find_byte_func_type.
1522 * arc-opc.c: Include <stdio.h>. Remove declarations of
1523 insert_multshift and extract_multshift.
1524 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1525 conditionals.
1526 (extract_value): Fully parenthesize expression.
1527 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1528 * h8500-opc.h (h8500_table): Fully bracket initializer.
1529 * w65-opc.h (optable): Likewise.
1530 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1531 * i386-dis.c (OP_E): Initialize local variables.
1532 * m10200-dis.c (print_insn_mn10200): Likewise.
1533 * mips-dis.c (print_insn_mips16): Likewise.
1534 * sh-dis.c (print_insn_shx): Likewise.
1535 * v850-dis.c (print_insn_v850): Likewise.
1536 * ns32k-dis.c (print_insn_arg): Declare.
1537 (get_displacement, invalid_float): Declare.
1538 (list_search, sign_extend, flip_bytes): Declare return type.
1539 (get_displacement): Likewise.
1540 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1541 string.
1542 (print_insn_ns32k): Make i unsigned.
1543 (invalid_float): Make static. Declare type of val.
1544 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1545 on each for iteration.
1546 * tic30-dis.c (get_indirect_operand): Likewise.
1547 * z8k-dis.c (print_insn_z8001): Declare return type.
1548 (print_insn_z8002): Likewise.
1549 (unparse_instr): Fix sprintf format strings.
1551 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1553 * mips-opc.c: Add "sync.l" and "sync.p".
1555 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1557 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1558 default m68k variant to recognize.
1560 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1561 (ctrl, cobr, mem, ea): Likewise.
1562 (print_addr): Likewise. Remove cast.
1563 (ea): Cast argument of print_addr to bfd_vma.
1565 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1566 variable value.
1567 (cgen_parse_unsigned_integer): Likewise.
1568 (cgen_parse_address): Likewise.
1570 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1572 * i960-dis.c (ctrl): Add full braces to structure initialization.
1573 (cobr, mem, reg): Likewise.
1574 (ea): Correct parenthesization in expression.
1576 * cgen-asm.c: Include <ctype.h>.
1577 (build_asm_hash_table): Remove unused local variable i.
1578 (cgen_parse_keyword): Add casts to avoid warnings.
1580 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1581 symbol. Fix indentation.
1582 (print_insn_little_arm): Likewise.
1584 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1586 * configure.in: Use AM_DISABLE_SHARED.
1587 * aclocal.m4, configure: Rebuild with libtool 1.2.
1589 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1591 These patches are courtesy of Jonathan Walton and Tony Thompson
1592 (athompso@cambridge.arm.com).
1594 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1595 relative addresses.
1597 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1598 both the offset and the label closest to the destination.
1600 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1602 * m32r-opc.h: Regenerate.
1604 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1606 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1608 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1610 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1611 assume that info->symbols is non-empty.
1613 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1615 * alpha-opc.c (cvtqs) There is no such thing.
1616 (cvttq): Missing most of the /*d variants.
1618 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1620 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1621 delayed branches or jumps.
1623 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1625 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1626 to *info->symbols.
1627 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1628 * tic30-dis.c (print_branch): Likewise.
1630 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1632 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1633 saved_symbol code as it is no longer needed.
1635 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1637 * cgen-asm.c: Include symcat.h.
1638 * cgen-dis.c,cgen-opc.c: Ditto.
1639 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1641 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1643 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1645 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1647 * m32r-opc.[ch]: Regenerate.
1649 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1651 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1652 arguments. Don't perform validation here.
1653 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1655 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1657 * m32r-opc.c: Regenerate.
1659 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1661 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1662 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1664 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1666 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1668 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1670 * configure.in: Get the version number from BFD.
1671 * configure: Rebuild.
1673 From H.J. Lu <hjl@gnu.org>:
1674 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1675 * Makefile.in: Rebuild.
1677 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1679 * m32r-opc.c: Regenerate.
1680 * m32r-opc.h: Regenerate.
1682 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1684 * m32r-opc.c: Regenerate.
1686 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1688 Fix rac to accept only a0:
1689 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1690 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1691 Introduce OPERAND_GPR.
1692 * d10v-dis.c (print_operand): Likewise.
1694 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1696 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1697 (cgen_hw_lookup): Make result const.
1698 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1700 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1702 * configure, aclocal.m4: Rebuild with new libtool.
1704 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1706 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1707 instructions use a PC relative branch, not absolute.
1709 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1711 * configure.in: Set libtool_enable_shared rather than
1712 libtool_shared. Remove diversion hack.
1713 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1715 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1717 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1718 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1720 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1722 * tic30-dis.c: New file.
1723 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1724 * configure.in: Handle bfd_tic30_arch.
1725 * Makefile.am: Rebuild dependencies.
1726 (CFILES): Add tic30-dis.c
1727 (ALL_MACHINES): Add tic30-dis.lo.
1728 * configure, Makefile.in: Rebuild.
1730 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1732 * m32r-opc.h (HAVE_CPU_M32R): Define.
1734 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1736 * v850-opc.c (insertion routines): If both alignment and size is
1737 wrong then report this.
1739 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1741 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1742 Only recognize instructions for the current target_processor.
1744 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1746 * d10v-dis.c (PC_MASK): Correct value.
1747 (print_operand): If there's a reloc, don't calculate the
1748 address because they could be in different sections.
1750 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1752 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1753 instruction after the 4650's "mul" instruction; nobody's using the
1754 4010 these days. If object files someday indicate which processor
1755 variant they're intended for, we can do a better job at this.
1757 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1759 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1760 table provided entry size. Use CGEN_INSN_MNEMONIC.
1761 (cgen_parse_keyword): Rewrite.
1762 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1763 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1764 * cgen-opc.c: Clean up pass over `struct foo' usage.
1765 (cgen_keyword_lookup_value): Handle "" entry.
1766 (cgen_keyword_add): Likewise.
1768 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1770 * mips-opc.c: Add FP_D to s.d instruction flags.
1772 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1774 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1776 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1778 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1779 PC relative offset forms before the 15 bit forms. An assembler command
1780 line option now chooses the default.
1782 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1784 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1785 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1787 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1789 * configure: Only build libopcodes shared if --enable-shared's value
1790 was `yes', or was set to `*opcodes*'.
1791 * aclocal.m4: Likewise.
1792 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1793 original source of this bit of code. It's not clear what the best fix
1794 would be, though.
1796 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1798 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1799 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1800 offset forms before the 15 bit forms, to default to the long forms.
1802 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1804 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1806 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1808 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1809 symbol if none is present.
1810 (print_insn_big_arm): Prevent examination of stored symbol if
1811 none is present.
1813 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1815 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1817 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1819 * disassemble.c: Remove disasm_symaddr() function.
1821 * arm-dis.c: Use info->symbol instead of info->flags to determine
1822 if disassmbly should be in Thumb or Arm mode.
1824 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1826 * arm-dis.c: Add support for disassembling Thumb opcodes.
1827 (print_insn_thumb): New function.
1829 * disassemble.c (disasm_symaddr): New function.
1831 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1832 (thumb_opcodes): Table of Thumb opcodes.
1834 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1836 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1838 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1839 and 'v' as operand types.
1841 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1843 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1844 <olivier.carmona@di.epfl.ch>.
1845 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1846 which has a two word opcode with a one word argument.
1848 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1850 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1851 unsigned, not signed.
1852 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1854 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1856 * d10v-dis.c (print_operand):
1857 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1859 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1861 * d10v-opc.c (OPERAND_FLAG): Split into:
1862 (OPERAND_FFLAG, OPERAND_CFLAG) .
1863 (FSRC): Split into:
1864 (FFSRC, CFSRC).
1866 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1868 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1869 field for all INSN_MACRO's.
1870 * mips16-opc.c: same
1872 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1874 * mips-opc.c (sync,cache): These are 3900 insns.
1876 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1878 sh-opc.h (sh_table): Remove ftst/nan.
1880 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1882 * mips-opc.c (ffc, ffs): Fix mask.
1884 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1886 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1887 control registers.
1889 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1891 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1892 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1894 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1896 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1897 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1899 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1901 * v850-dis.c (disassemble): Replace // with /* ... */
1903 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1905 * sparc-opc.c: Add wr & rd for v9a asr's.
1906 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1907 (v9a_asr_reg_names): New variable.
1908 Patch from David Miller <davem@vger.rutgers.edu>.
1910 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1912 * sparc-opc.c (v9notv9a): New insn type.
1913 (IMPDEP): Move to the end to not conflict with edge8 et al.
1914 Patch from David Miller <davem@vger.rutgers.edu>.
1916 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1918 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1920 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1922 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1924 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1926 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1927 of disassemble_info structure to determine if an overlay address
1928 has a matching symbol in low memory.
1930 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1931 new symbol_at_address_func field in disassemble_info structure.
1933 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1935 * v850-opc.c (extract_d22): Use signed arithmatic.
1937 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1939 * mips-opc.c: Three op mult is not an ISA insn.
1941 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1943 * mips-opc.c: Fix formatting.
1945 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1947 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1948 than assuming that char is signed. Explicitly sign extend 16 bit
1949 values, rather than assuming that short is 16 bits.
1950 (OP_sI, OP_J, OP_DIR): Likewise.
1952 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1954 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1955 system registers.
1957 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1959 * v850-opc.c: Fix typo in comment.
1961 * v850-dis.c (disassemble): Add test of processor type when
1962 determining opcodes.
1964 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1966 * configure.in: Use a diversion to set enable_shared before the
1967 arguments are parsed.
1968 * configure: Rebuild.
1970 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1972 * m68k-opc.c (TBL1): Use ! rather than `.
1973 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1975 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1977 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1979 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1981 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1982 for mcf5200.
1984 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1985 * aclocal.m4: Rebuild with new libtool.
1986 * configure: Rebuild.
1988 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1990 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1992 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1994 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1996 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1998 * v850-opc.c (v850_opcodes): Further rearrangements.
2000 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2002 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2004 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2006 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2007 parser to work.
2009 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2011 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2013 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2015 * v850-opc.c: Initialise processors field of v850_opcode structure.
2017 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2019 Merge changes from Martin Hunt:
2021 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2023 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2024 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2025 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2027 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2029 * d30v-dis.c (print_insn): First operand of d*i (delayed
2030 branch) instructions is relative.
2032 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2033 (d30v_operand_table): Add IMM6S3 type.
2034 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2036 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2037 and cmp instructions.
2039 * d30v-opc.c: Correct entries for repeat*, and sat*.
2040 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2041 types. Correct several formats.
2043 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2045 * d30v-opc.c (pre_defined_registers): Change control registers.
2047 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2048 SHORT_C2. Manual was incorrect.
2050 * d30v-dis.c (lookup_opcode): Return value now indicates
2051 if an opcode has a short and a long form. Used for deciding
2052 to append a ".s" or ".l".
2053 (print_insn): Append a ".s" to an instruction if it is
2054 the short form and ".l" if it is a long form. Do not append
2055 anything if the instruction has only one possible size.
2057 * d30v-opc.c: Change mulx2h to require an even register.
2058 New form: SHORT_A2; a SHORT_A form that needs an even
2059 register as the first operand.
2061 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2062 instruction was not being disassembled if there were an odd
2063 number of instructions.
2065 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2067 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2069 * v850-dis.c (disassemble): Improved display of register lists.
2071 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2073 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2074 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2075 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2076 fandnot1s, fandnot2s.
2078 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2080 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2082 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2084 * cgen-asm.c (cgen_parse_address): New argument resultp.
2085 All callers updated.
2086 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2088 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2090 * mn10200-dis.c (disassemble): PC relative instructions are
2091 relative to the next instruction, not the current instruction.
2093 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2095 * v850-dis.c (disassemble): Only signed extend values that are not
2096 returned by extract functions.
2097 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2099 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2101 * v850-opc.c: Update comments. Remove use of
2102 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2104 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2106 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2108 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2110 * configure: Rebuilt with latest devo autoconf for NT support.
2112 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2114 * v850-dis.c (disassemble): Use curly brace syntax for register
2115 lists.
2117 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2118 where r0 is being used as a destination register.
2120 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2122 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2124 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2126 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2128 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2130 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2131 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2132 opcodes..
2134 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2136 * configure (cgen_files): Add support for v850e target.
2137 * configure.in (cgen_files): Add support for v850e target.
2139 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2141 * configure (cgen_files): Add support for v850ea target.
2142 * configure.in (cgen_files): Add support for v850ea target.
2144 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2146 * configure.in (bfd_arc_arch): Add.
2147 * configure: Rebuild.
2148 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2149 * Makefile.in: Rebuild.
2150 * arc-dis.c, arc-opc.c: New files.
2151 * disassemble.c (ARCH_all): Define ARCH_arc.
2152 (disassembler): Add ARC support.
2154 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2156 * v850-dis.c (disassemble): Add support for v850EA instructions.
2158 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2159 (v850_opcodes): Add v850EA instructions.
2161 * v850-dis.c (disassemble): Add support for v850E instructions.
2163 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2164 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2165 insert_spe, extract_spe): New Functions.
2166 (v850_opcodes): Add v850E instructions.
2168 * v850-opc.c: Reorganised and re-layed out to improve readability
2169 and portability.
2171 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2173 * configure: Rebuild with autoconf 2.12.1.
2175 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2177 * aclocal.m4, configure: Rebuild with new automake patches.
2179 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2181 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2182 * acinclude.m4: Just include acinclude.m4 from BFD.
2183 * aclocal.m4, configure: Rebuild.
2185 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2187 * Makefile.am: New file, based on old Makefile.in.
2188 * acconfig.h: New file.
2189 * acinclude.m4: New file.
2190 * stamp-h.in: New file.
2191 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2192 Removed shared library handling; now handled by libtool. Replace
2193 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2194 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2195 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2196 handling in AC_OUTPUT.
2197 * dep-in.sed: Change .o to .lo.
2198 * Makefile.in: Now built with automake.
2199 * aclocal.m4: Now built with aclocal.
2200 * config.in, configure: Rebuild.
2202 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2204 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2206 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2208 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2209 Make array const.
2210 * sparc-dis.c (sorted_opcodes): New static local.
2211 (struct opcode_hash): `opcode' is pointer to const element.
2212 (build_hash): First arg is now table of sorted pointers.
2213 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2214 (compare_opcodes): Update.
2216 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2218 * cgen-opc.c: #include <ctype.h>.
2219 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2220 Handle case insensitive hashing.
2221 (hash_keyword_value): Change type of `value' to unsigned int.
2223 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2225 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2226 precision FP, mark it as such. Likewise for double precision
2227 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2228 possible.
2230 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2232 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2233 negating it.
2234 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2235 nesting depth when all the macros are expanded.
2237 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2239 * sparc-opc.c: The fcmp v9a instructions take an integer register
2240 as a destination, not a floating point register. From Christian
2241 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2243 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2245 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2246 syntax. From Roman Hodek
2247 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2249 * i386-dis.c (twobyte_has_modrm): Fix pand.
2251 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2253 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2255 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2257 * arm-dis.c: Add prototypes for arm_decode_shift and
2258 print_insn_arm.
2260 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2262 * mips-opc.c: Add r3900 insns.
2264 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2266 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2267 print delay slot instructions on the same line. When using a PC
2268 relative load, add a comment with the value being loaded if it can
2269 be obtained.
2271 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2273 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2274 to pushS/popS for segment regs and byte constant so that
2275 pushw/popw printed when in 16 bit data mode.
2277 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2278 print cbtw, cwtd in 16 bit data mode.
2279 * i386-dis.c (putop): extra case W to support above.
2281 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2282 address size prefix in 16 bit address mode.
2284 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2286 * sh-dis.c: Reindent. Rename local variable fprintf to
2287 fprintf_fn.
2289 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2291 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2293 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2295 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2296 field membership.
2297 * mips16-opc.c (mip16_opcodes): same.
2299 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2301 * m68k-opc.c (moveb): Change $d to %d.
2303 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2305 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2306 (twobyte_has_modrm): Likewise.
2307 (grps): Likewise.
2308 (OP_MMX, OP_EM, OP_MS): New static functions.
2310 * i386-dis.c: Revert patch of April 4. The output now matches
2311 what gcc generates.
2313 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2315 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2316 of $simm16.
2318 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2320 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2322 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2324 * Makefile.in (install): Depend upon installdirs.
2325 (installdirs): New target.
2327 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2329 From Thomas Graichen <graichen@rzpd.de>:
2330 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2331 * configure: Rebuild.
2333 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2335 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2336 Delete string{,s}.h support.
2338 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2340 * cgen-asm.c (cgen_parse_operand_fn): New global.
2341 (cgen_parse_{{,un}signed_integer,address}): Update call to
2342 cgen_parse_operand_fn.
2343 (cgen_init_parse_operand): New function.
2344 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2345 from cgen_asm_init_parse.
2346 (m32r_cgen_assemble_insn): New operand `errmsg'.
2347 Delete call to as_bad, return error message to caller.
2348 (m32r_cgen_asm_hash_keywords): #if 0 out.
2350 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2352 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2353 not data register.
2354 [case 'J']: Fix typo in register name.
2356 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2358 * configure.in: Substitute SHLIB_LIBS.
2359 * configure: Rebuild.
2360 * Makefile.in (SHLIB_LIBS): New variable.
2361 ($(SHLIB)): Use $(SHLIB_LIBS).
2363 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2365 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2367 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2369 * disassemble.c (disassembler): Handle m32r.
2371 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2373 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2374 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2375 * Makefile.in (CFILES): Add them.
2376 (ALL_MACHINES): Add them.
2377 (dependencies): Regenerate.
2378 * configure.in (cgen_files): New variable.
2379 (bfd_m32r_arch): Add entry.
2380 * configure: Regenerate.
2382 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2384 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2385 * configure: Rebuild.
2387 * Makefile.in: Rebuild dependencies.
2389 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2391 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2392 fdivp.
2394 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2396 * Branched binutils 2.8.
2398 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2400 * m10200-dis.c: Rename from mn10200-dis.c.
2401 * m10200-opc.c: Rename from mn10200-opc.c.
2402 * m10300-dis.c: Rename from mn10300-dis.c
2403 * m10300-opc.c: Rename from mn10300-opc.c.
2404 * Makefile.in: Update accordingly.
2406 * mips16-opc.c: Add mul and dmul macros.
2408 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2410 * makefile.vms: Update CFLAGS, add clean target.
2412 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2414 * mips-opc.c: Add "wait". From Ralf Baechle
2415 <ralf@gnu.ai.mit.edu>.
2417 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2418 * configure, config.in: Rebuild.
2419 * sysdep.h: Include <stdlib.h> if it exists.
2420 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2421 <string.h>.
2422 * Makefile.in: Rebuild dependencies.
2424 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2426 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2427 Andrew Bray <andy@madhouse.demon.co.uk>.
2429 * mips-opc.c: Add cast when setting mips_opcodes.
2431 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2433 * v850-dis.c (disassemble): Fix sign extension problem.
2434 * v850-opc.c (extract_d*): Fix sign extension problems to make
2435 disassembly calculate branch offsets correctly.
2437 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2439 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2441 * mips-opc.c: Add dctr and dctw.
2443 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2445 * d30v-dis.c (print_insn): Change the way signed constants
2446 are displayed.
2448 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2450 * Makefile.in (BFD_H): New variable.
2451 (HFILES): New variable.
2452 (CFILES): Add all C files.
2453 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2454 Delete old dependencies, and build new ones.
2455 * dep-in.sed: New file.
2457 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2459 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2461 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2463 * mn10200-opc.c: Change "trap" to "syscall".
2464 * mn10300-opc.c: Add new "syscall" instruction.
2466 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2468 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2469 mulul insns on the coldfire.
2471 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2473 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2474 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2475 (print_insn_little_arm): Likewise.
2477 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2479 Based on patches from H.J. Lu <hjl@lucon.org>:
2480 * i386-dis.c (fetch_data): Add prototype.
2481 * m68k-dis.c (fetch_data): Add prototype.
2482 (dummy_print_address): Add prototype. Make static.
2483 * ppc-opc.c (valid_bo): Add prototype.
2484 * sparc-dis.c (build_hash_table): Add prototype.
2485 (is_delayed_branch, compute_arch_mask): Add prototypes.
2486 (print_insn_sparc): Make several local variables const.
2487 (compare_opcodes): Change arguments to const PTR. Add prototype.
2488 * sparc-opc.c (arg): Change name field to be const.
2489 (lookup_name, lookup_value): Add prototypes. Change table and
2490 name parameters to be const.
2491 (sparc_encode_asi): Change name parameter to be const.
2492 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2493 (sparc_encode_sparclet_cpreg): Likewise.
2494 (sparc_decode_asi): Change return type to be const.
2495 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2496 (sparc_decode_sparclet_cpreg): Likewise.
2498 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2500 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2501 Solaris doesn't like the combined options, and the -f is
2502 unnecessary.
2503 (stamp-tshlink, install): Likewise.
2505 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2507 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2508 as relaxable.
2510 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2512 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2514 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2516 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2517 the mc68000.
2519 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2521 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2523 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2525 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2527 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2529 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2531 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2533 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2534 floatformat_to_double to make portable.
2535 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2536 precision float.
2538 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2540 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2541 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2543 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2545 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2546 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2548 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2550 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2551 (OFF_SL_BR_SCALED): ... to this, and added the flag
2552 TIC80_OPERAND_BASEREL to the flags word.
2553 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2554 OFF_SL_BR_SCALED.
2556 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2558 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2559 Change mips_opcodes from const array to a pointer,
2560 and change bfd_mips_num_opcodes from const int to int,
2561 so that we can increase the size of the mips opcodes table
2562 dynamically.
2564 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2566 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2567 store BITNUM values in the table in one's complement form
2568 to match behavior when assembler is given a raw numeric
2569 value for a BITNUM operand.
2570 * tic80-dis.c (print_operand_bitnum): Ditto.
2572 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2574 * d30v-opc.c: Removed references to FLAG_X.
2576 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2578 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2580 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2582 * Makefile.in: Added d30v object files.
2583 * configure: (bfd_d30v_arch) Rebuilt.
2584 * configure.in: (bfd_d30v_arch) Added new case.
2585 * d30v-dis.c: New file.
2586 * d30v-opc.c: New file.
2587 * disassemble.c (disassembler) Add entry for d30v.
2589 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2591 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2592 representations for the floating point BITNUM values.
2594 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2596 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2597 in the table in one's complement form, as they appear in the
2598 actual instruction.
2599 (tic80_symbol_to_value): Use macros to access predefined
2600 symbol fields.
2601 (tic80_value_to_symbol): Ditto.
2602 (tic80_next_predefined_symbol): New function.
2603 * tic80-dis.c (print_operand_bitnum): Remove code that did
2604 one's complement for BITNUM values.
2606 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2608 * makefile.vms: Remove 8 bit characters. Update to latest
2609 gcc release.
2611 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2613 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2615 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2617 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2618 (IMM24_PCREL): Likewise.
2620 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2622 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2623 address for an extended PC relative instruction that is not a
2624 branch.
2626 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2628 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2629 bytes_per_line.
2631 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2633 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2634 (tic80_opcodes): Sort entries so that long immediate forms
2635 come after short immediate forms, making it easier for
2636 assembler to select the right one for a given operand.
2638 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2640 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2641 display_endian.
2642 (print_insn_mips16): Likewise.
2644 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2646 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2647 a symbol class that restricts translation to just that
2648 class (general register, condition code, etc).
2650 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2652 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2653 and REG_DEST_E for register operands that have to be
2654 an even numbered register. Add REG_FPA for operands that
2655 are one of the floating point accumulator registers.
2656 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2657 (tic80_opcodes): Change entries that need even numbered
2658 register operands to use the new operand table entries.
2659 Add "or" entries that are identical to "or.tt" entries.
2661 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2663 * mips16-opc.c: Add new cases of exit instruction for
2664 disassembler.
2665 * mips-dis.c (print_mips16_insn_arg): Display floating point
2666 registers in operands of exit instruction. Print `$' before
2667 register names in operands of entry and exit instructions.
2669 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2671 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2672 pairs for all predefined symbols recognized by the assembler.
2673 Also used by the disassembling routines.
2674 (tic80_symbol_to_value): New function.
2675 (tic80_value_to_symbol): New function.
2676 * tic80-dis.c (print_operand_control_register,
2677 print_operand_condition_code, print_operand_bitnum):
2678 Remove private tables and use tic80_value_to_symbol function.
2680 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2682 * d10v-dis.c (print_operand): Change address printing
2683 to correctly handle PC wrapping. Fixes PR11490.
2685 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2687 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2688 branches relaxable.
2690 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2692 * mips-dis.c (print_insn_mips16): Set insn_info information.
2693 (print_mips16_insn_arg): Likewise.
2695 * mips-dis.c (print_insn_mips16): Better handling of an extend
2696 opcode followed by an instruction which can not be extended.
2698 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2700 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2701 coldfire moveb instruction to not allow an address register as
2702 destination. Although the documentation does not indicate that
2703 this is invalid, experiments uncovered unexpected behavior.
2704 Added a comment explaining the situation. Thanks to Andreas
2705 Schwab for pointing this out to me.
2707 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2709 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2710 entries are presorted so that entries with the same mnemonic are
2711 adjacent to each other in the table. Sort the entries for each
2712 instruction so that this is true.
2714 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2716 * m68k-dis.c: Include <libiberty.h>.
2717 (print_insn_m68k): Sort the opcode table on the most significant
2718 nibble of the opcode.
2720 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2722 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2723 "vsub", "vst", "xnor", and "xor" instructions.
2724 (V_a1): Renamed from V_a, msb of accumulator reg number.
2725 (V_a0): Add macro, lsb of accumulator reg number.
2727 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2729 * tic80-dis.c (print_insn_tic80): Broke excessively long
2730 function up into several smaller ones and arranged for
2731 the instruction printing function to be callable recursively
2732 to print vector instructions that have both a load and a
2733 math instruction packed into a single opcode.
2734 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2735 to explain why it comes after the other vector opcodes.
2737 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2739 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2740 move insns to handle immediate operands.
2742 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2744 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2745 fix operand mask in the "moveml" entries for the coldfire.
2747 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2749 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2750 New macros for building vector instruction opcodes.
2751 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2752 FMT_LI, which were unused. The field is now a flags field.
2753 Remove some opcodes that are possible, but illegal, such
2754 as long immediate instructions with doubles for immediate
2755 values. Add "vadd" and "vld" instructions.
2757 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2759 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2760 the order more logical. Move the shift alias instructions ("rotl",
2761 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2762 interspersed with the regular sr.x and sl.x instructions. Add
2763 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2764 "sub", "subu", "swcr", and "trap".
2766 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2768 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2769 (OFF_SL_PC): Renamed from OFF_SL.
2770 (OFF_SS_BR): New operand type for base relative operand.
2771 (OFF_SL_BR): New operand type for base relative operand.
2772 (REG_BASE): New operand type for base register operand.
2773 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2774 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2775 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2776 instructions.
2777 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2778 10 char field, padded with spaces on rhs, rather than a string
2779 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2780 than old TIC80_OPERAND_RELATIVE. Add support for new
2781 TIC80_OPERAND_BASEREL flag bit.
2783 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2785 * tic80-dis.c (print_insn_tic80): Print floating point operands
2786 as floats.
2787 * tic80-opc.c (SPFI): Add single precision floating point
2788 immediate operand type.
2789 (ROTATE): Add rotate operand type for shifts.
2790 (ENDMASK): Add for shifts.
2791 (n): Macro for the 'n' bit.
2792 (i): Macro for the 'i' bit.
2793 (PD): Macro for the 'PD' field.
2794 (P2): Macro for the 'P2' field.
2795 (P1): Macro for the 'P1' field.
2796 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2797 "fcmp", and "fdiv".
2799 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2801 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2802 adding in current address for pc-relative operands.
2804 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2806 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2807 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2808 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2809 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2810 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2811 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2812 (REG_SCALED, LSI_SCALED): New operand types.
2813 (E): New macro for 'E' bit at bit 27.
2814 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2815 opcodes, including the various size flavors (b,h,w,d) for
2816 the direct load and store instructions.
2818 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2820 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2821 in an instruction.
2822 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2823 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2824 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2825 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2826 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2827 masks with "MASK_* & ~M_*" to get the M bit reset.
2828 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2830 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2832 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2833 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2834 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2835 form.
2836 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2837 CC, SICR, and LICR table entries.
2838 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2839 "bcnd", and "brcr" opcodes.
2841 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2843 * ppc-opc.c (powerpc_operands): Make comment match the
2844 actual fields (no shift field).
2845 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2846 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2847 partial implementation, work in progress.
2848 * tic80-opc.c (tic80_operands): Begin construction operands table.
2849 (tic80_opcodes): Continue populating opcodes table and start
2850 filling in the operand indices.
2851 (tic80_num_opcodes): Add this.
2853 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2855 * m68k-opc.c: Add #B case for moveq.
2857 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2859 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2860 before they are used.
2862 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2864 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2865 for "breakpoint" instruction.
2867 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2869 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2870 (dep): Use ALL_CFLAGS rather than CFLAGS.
2872 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2874 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2875 flag.
2877 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2879 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2880 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2882 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2884 * mips16-opc.c: Add "abs".
2886 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2888 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2889 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2890 (disassembler): Add bfd_arch_tic80 support to set disassemble
2891 to print_insn_tic80.
2892 * tic80-dis.c (print_insn_tic80): Add stub.
2894 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2896 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2897 * configure: Regenerate with autoconf.
2898 * tic80-dis.c: Add file.
2899 * tic80-opc.c: Add file.
2901 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2903 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2905 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2907 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2908 (mn10200_opcodes): Use it for some logicals and btst insns.
2909 Add "break" and "trap" instructions.
2911 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2913 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2915 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2917 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2918 relative load or add now depends upon whether the instruction is
2919 in a delay slot.
2921 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2923 * mn10200-dis.c: Finish writing disassembler.
2924 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2925 Fix mask for "jmp (an)".
2927 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2928 handle endianness issues for mn10300.
2930 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2932 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2934 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2935 instruction. Fix opcode field for "movb (imm24),dn".
2937 * mn10200-opc.c (mn10200_operands): Fix insertion position
2938 for DI operand.
2940 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2942 * mn10200-opc.c: Create mn10200 opcode table.
2943 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2944 but moving along nicely.
2946 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2948 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2950 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2952 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2953 specifiers for fmovem* instructions.
2955 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2957 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2959 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2961 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2962 with dsrl.
2964 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2966 * mn10300-opc.c: Add some comments explaining the various
2967 operands and such.
2969 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2971 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2973 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2974 specifiers.
2976 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2977 operand specifiers in fmovm* instructions.
2979 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2981 * ppc-opc.c (insert_li): Give an error if the offset has the two
2982 least significant bits set.
2984 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2986 * mips-dis.c (print_insn_mips16): Separate the instruction from
2987 the arguments with a tab, not a space.
2989 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2991 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2992 register prefix.
2994 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2995 mov am,(imm32,sp).
2997 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2999 * configure: Rebuild with autoconf 2.12.
3001 Add support for mips16 (16 bit MIPS implementation):
3002 * mips16-opc.c: New file.
3003 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3004 (mips16_reg_names): New static array.
3005 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3006 after seeing a 16 bit symbol.
3007 (print_insn_little_mips): Likewise.
3008 (print_insn_mips16): New static function.
3009 (print_mips16_insn_arg): New static function.
3010 * mips-opc.c: Add jalx instruction.
3011 * Makefile.in (mips16-opc.o): New target.
3012 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3013 * configure: Rebuild.
3015 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3017 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3018 operand specifiers in *save, *restore and movem* instructions.
3020 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3021 the coldfire.
3023 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3024 register operands for immediate arithmetic, not, neg, negx, and
3025 set according to condition instructions.
3027 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3028 specifier of the effective-address operand in immediate forms of
3029 arithmetic instructions. The specifier for the immediate operand
3030 notes how and where the constant will be stored.
3032 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3034 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3035 opcode.
3037 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3038 register prefix.
3040 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3042 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3044 * mn10300-dis.c (disassemble): Handle register lists.
3046 * mn10300-opc.c: Fix handling of register list operand for
3047 "call", "ret", and "rets" instructions.
3049 * mn10300-dis.c (disassemble): Print PC-relative and memory
3050 addresses symbolically if possible.
3051 * mn10300-opc.c: Distinguish between absolute memory addresses,
3052 pc-relative offsets & random immediates.
3054 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3055 in 7 byte insns.
3056 (disassemble): Handle SPLIT and EXTENDED operands.
3058 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3060 * mn10300-dis.c: Rough cut at printing some operands.
3062 * mn10300-dis.c: Start working on disassembler support.
3063 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3065 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3066 list.
3067 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3069 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3071 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3073 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3075 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3076 register argument is calls and jmp instructions.
3078 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3080 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3081 getx operand. Fix opcode for mulqu imm,dn.
3083 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3085 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3086 in MN10300_OPERAND_SPLIT operands for how many bits
3087 appear in the basic insn word. Add IMM32_HIGH24,
3088 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3089 (mn10300_opcodes): Use new operands as needed.
3091 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3092 for bset, bclr, btst instructions.
3093 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3095 * mn10300-opc.c (mn10300_operands): Remove many redundant
3096 operands. Update opcode table as appropriate.
3097 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3098 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3100 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3102 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3103 operands (for indexed load/stores). Fix bitpos for DI
3104 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3105 few instructions that insert immediates/displacements in the
3106 middle of the instruction. Add IMM8E for 8 bit immediate in
3107 the extended part of an instruction.
3108 (mn10300_operands): Use new opcodes as appropriate.
3110 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3112 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3113 sequential so the assembler never parallelizes it with
3114 other instructions.
3116 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3118 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3119 a data/address register that appears in register field 0
3120 and register field 1.
3121 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3123 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3125 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3126 standard disassembly.
3128 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3129 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3130 Recategorize PALcode instructions.
3132 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3134 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3136 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3138 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3139 there are no operand types.
3141 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3143 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3144 changed.
3145 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3147 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3149 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3151 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3153 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3154 and sst.w instructions.
3156 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3157 "bCC"instructions).
3159 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3161 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3162 and the arguments.
3164 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3166 * ppc-opc.c (PPCPWR2): Define.
3167 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3168 it.
3170 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3172 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3173 field for movhu instruction.
3175 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3176 cast value to "long" not "signed long" to keep hpux10
3177 compiler quiet.
3179 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3181 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3182 for mov (abs16),DN.
3184 * mn10300-opc.c (FMT*): Remove definitions.
3186 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3187 for shift-by-register opcodes.
3189 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3190 into [AD][MN][01] for encoding the position of the register
3191 in the opcode.
3193 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3195 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3196 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3198 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3200 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3201 Fix various typos. Add "PAREN" operand.
3202 (MEM, MEM2): Define.
3203 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3204 operands. Fix several typos.
3206 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3207 changes.
3209 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3211 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3212 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3213 at this time.
3214 (mn10300_opcodes): Break opcode format out into its own field.
3215 Update many operand fields to deal with signed vs unsigned
3216 issues. Fix one or two typos in the "mov" instruction
3217 opcode, mask and/or operand fields.
3219 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3221 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3222 m68851 wasn't reset.
3224 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3226 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3227 all opcodes. Very rough cut at operands for all opcodes.
3229 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3230 opcode table.
3232 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3234 * mn10200-opc.c, mn10300-opc.c: New files.
3235 * mn10200-dis.c, mn10300-dis.c: New files.
3236 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3237 * disassemble.c: Break mn10x00 support into 10200 and 10300
3238 support.
3239 * configure.in: Likewise.
3240 * configure: Rebuilt.
3242 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3244 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3246 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3248 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3249 MN10x00 processors.
3250 * disassemble (ARCH_mn10x00): Define.
3251 (disassembler): Handle bfd_arch_mn10x00.
3252 * configure.in: Recognize bfd_mn10x00_arch.
3253 * configure: Rebuilt.
3255 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3257 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3258 accordingly. Don't declare functions using op_rtn.
3260 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3262 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3263 params to be more standard.
3264 * (disassemble): Print absolute addresses and symbolic names for
3265 branch and jump targets.
3266 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3267 bit operands.
3268 * (v850_opcodes): Add breakpoint insn.
3270 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3272 * m68k-opc.c: Move the fmovemx data register cases before the
3273 other cases, so that they get recognized before the data register
3274 does gets treated as a degenerate register list.
3276 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3278 * mips-opc.c: Add a case for "div" and "divu" with two registers
3279 and a destination of $0.
3281 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3283 * mips-dis.c (print_insn_arg): Add prototype.
3284 (_print_insn_mips): Ditto.
3286 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3288 * mips-dis.c (print_insn_arg): Print condition code registers as
3289 $fccN.
3291 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3293 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3295 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3297 * v850-dis.c (disassemble): Make static. Provide prototype.
3299 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3301 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3302 in range checks.
3304 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3306 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3307 ']' characters into the output stream.
3308 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3309 Add "memop" field to all opcodes (for the disassembler).
3310 Reorder opcodes so that "nop" comes before "mov" and "jr"
3311 comes before "jarl".
3313 * v850-dis.c (print_insn_v850): Fix typo in last change.
3315 * v850-dis.c (print_insn_v850): Properly handle disassembling
3316 a two byte insn at the end of a memory region when the memory
3317 region's size is only two byte aligned.
3319 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3321 * v850-dis.c (v850_reg_names): Define.
3322 (v850_sreg_names, v850_cc_names): Likewise.
3323 (disassemble): Very rough cut at printing operands (unformatted).
3325 * v850-opc.c (BOP_MASK): Fix.
3326 (v850_opcodes): Fix mask for jarl and jr.
3328 * v850-dis.c: New file. Skeleton for disassembler support.
3329 * Makefile.in Remove v850 references, they're not needed here.
3330 * configure.in: Add v850-dis.o when building v850 toolchains.
3331 * configure: Rebuilt.
3332 * disassemble.c (disassembler): Call v850 disassembler.
3334 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3335 (insert_d8_6, extract_d8_6): New functions.
3336 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3337 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3338 Add D8_6.
3339 (IF4A, IF4B): Use "D7" instead of "D7S".
3340 (IF4C, IF4D): Use "D8_7" instead of "D8".
3341 (IF4E, IF4F): New. Use "D8_6".
3342 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3343 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3345 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3346 (v850_operands): Change D16 to D16_15, use special insert/extract
3347 routines. New new D16 that uses the generic insert/extract code.
3348 (IF7A, IF7B): Use D16_15.
3349 (IF7C, IF7D): New. Use D16.
3350 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3352 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3353 message. Issue an error if the branch offset is odd.
3355 * v850-opc.c: Add notes about needing special insert/extract
3356 for all the load/store insns, except "ld.b" and "st.b".
3358 * v850-opc.c (insert_d22, extract_d22): New functions.
3359 (v850_operands): Use insert_d22 and extract_d22 for
3360 D22 operands.
3361 (insert_d9): Fix range check.
3363 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3365 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3366 and set bits field to D9 and D22 operands.
3368 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3370 * v850-opc.c (v850_operands): Define SR2 operand.
3371 (v850_opcodes): "ldsr" uses R1,SR2.
3373 * v850-opc.c (v850_opcodes): Fix opcode specs for
3374 sld.w, sst.b, sst.h, sst.w, and nop.
3376 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3378 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3379 end of the opcode table.
3381 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3383 * d10v-opc.c (pre_defined_registers): Added register pairs,
3384 "r0-r1", "r2-r3", etc.
3386 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3388 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3389 Create I16U for an unsigned 16bit mmediate operand.
3390 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3392 * v850-opc.c (v850_operands): Define EP operand.
3393 (IF4A, IF4B, IF4C, IF4D): Use EP.
3395 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3396 with immediate operand, "movhi". Tweak "ldsr".
3398 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3399 correct. Get sld.[bhw] and sst.[bhw] closer.
3401 * v850-opc.c (v850_operands): "not" is a two byte insn
3403 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3405 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3407 * v850-opc.c (two): Get order of words correct.
3409 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3411 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3412 register source and destination operands.
3413 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3415 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3416 same thinko in "trap" opcode.
3418 * v850-opc.c (v850_opcodes): Add initializer for size field
3419 on all opcodes.
3421 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3422 Add D8 for 8-bit unsigned field in short load/store insns.
3423 (IF4A, IF4D): These both need two registers.
3424 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3425 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3426 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3427 for "ldsr" and "stsr".
3428 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3429 is unsigned.
3431 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3432 short store word (sst.w).
3434 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3436 * v850-opc.c (v850_operands): Added insert and extract fields,
3437 pointers to functions that handle unusual operand encodings.
3439 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3441 * v850-opc.c (v850_opcodes): Enable "trap".
3443 * v850-opc.c (v850_opcodes): Fix order of displacement
3444 and register for "set1", "clr1", "not1", and "tst1".
3446 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3448 * v850-opc.c (v850_operands): Add "B3" support.
3449 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3450 and "tst1".
3452 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3454 * v850-opc.c: Close unterminated comment.
3456 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3458 * v850-opc.c (v850_operands): Add flags field.
3459 (v850_opcodes): add move opcodes.
3461 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3463 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3464 * configure: (bfd_v850v_arch) Add new case.
3465 * configure.in: (bfd_v850_arch) Add new case.
3466 * v850-opc.c: New file.
3468 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3470 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3472 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3474 * d10v-opc.c: Add additional information to the opcode
3475 table to help determinine which instructions can be done
3476 in parallel.
3478 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3480 * mpw-make.sed: Update editing of include pathnames to be
3481 more general.
3483 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3485 * arm-opc.h: Added "bx" instruction definition.
3487 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3489 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3491 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3493 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3495 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3497 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3499 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3501 * makefile.vms: Update for alpha-opc changes.
3503 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3505 * i386-dis.c (print_insn_i386): Actually return the correct value.
3506 (ONE, OP_ONE): #ifdef out; not used.
3508 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3510 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3511 Changed subi operand type to treat 0 as 16.
3513 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3515 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3516 <rose@netcom.com>.
3518 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3520 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3521 memory transfer instructions. Add new format string entries %h and %s.
3522 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3523 formats %h and %s.
3525 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3527 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3528 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3530 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3532 * alpha-dis.c (print_insn_alpha_osf): Remove.
3533 (print_insn_alpha_vms): Remove.
3534 (print_insn_alpha): Make globally visible. Chose the register
3535 names based on info->flavour.
3536 * disassemble.c: Always return print_insn_alpha for the alpha.
3538 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3540 * d10v-dis.c (dis_long): Handle unknown opcodes.
3542 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3544 * d10v-opc.c: Changes to support signed and unsigned numbers.
3545 All instructions with the same name that have long and short forms
3546 now end in ".l" or ".s". Divs added.
3547 * d10v-dis.c: Changes to support signed and unsigned numbers.
3549 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3551 * d10v-dis.c: Change all functions to use info->print_address_func.
3553 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3555 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3556 move ccr/sr insns more strict so that the disassembler only
3557 selects them when the addressing mode is data register.
3559 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3560 * d10v-opc.c (pre_defined_registers): Declare.
3561 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3562 to pick a better name for the registers.
3564 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3566 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3567 operands for fexpand and fpmerge. From Christian Kuehnke
3568 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3570 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3572 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3573 print routine. Take new regnames and cpumask arguments.
3574 Kill the environment variable nonsense.
3575 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3576 (print_insn_alpha_vms): New function. Do VMS style regnames.
3577 * disassemble.c (disassembler): Test bfd flavour to pick
3578 between OSF and VMS routines. Default to OSF.
3580 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3582 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3583 * configure: Rebuild.
3584 * Makefile.in (install): Use @INSTALL_SHLIB@.
3586 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3588 * configure: (bfd_d10v_arch) Add new case.
3589 * configure.in: (bfd_d10v_arch) Add new case.
3590 * d10v-dis.c: New file.
3591 * d10v-opc.c: New file.
3592 * disassemble.c (disassembler) Add entry for d10v.
3594 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3596 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3597 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3599 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3601 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3602 distinguish between variants of the instruction set.
3603 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3604 distinguish between variants of the instruction set.
3606 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3608 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3609 the 8086 instruction set.
3610 * i386-dis.c: General cleanups. Make most things static. Add
3611 prototypes. Get rid of static variables aflags and dflags. Pass
3612 them as args (to almost everything).
3614 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3616 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3618 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3620 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3621 if the next arg is marked with SRC_IN_DST. Gross.
3623 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3624 we're looking for and find EXR.
3626 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3627 if we're looking for KBIT and we don't find it.
3629 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3630 for L_3 and L_2.
3632 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3633 3bit immediate operands.
3635 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3637 * Released binutils 2.7.
3639 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3640 <kkaempf@progis.ac-net.de>.
3642 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3644 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3646 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3648 * sparc-dis.c (print_insn_sparclite): New routine to print
3649 sparclite instructions.
3651 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3653 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3655 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3657 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3658 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3659 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3661 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3663 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3664 Use autoconf-set values.
3665 (docdir, oldincludedir): Removed.
3666 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3668 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3670 * alpha-opc.c: New file.
3671 * alpha-opc.h: Remove.
3672 * alpha-dis.c: Complete rewrite to use new opcode table.
3673 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3674 * configure: Rebuild with autoconf 2.10.
3675 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3676 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3677 alpha-opc.h.
3678 (alpha-opc.o): New target.
3680 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3682 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3683 Set imm_added_to_rs1 even if the source and destination register
3684 are not the same.
3686 * sparc-opc.c: Add some two operand forms of the wr instruction.
3688 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3690 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3691 to just "mode".
3693 * disassemble.c (disassembler): Handle H8/S.
3694 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3696 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3698 * sparc-opc.c: Add beq/teq as aliases for be/te.
3700 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3701 <sergei@msil.sps.mot.com>.
3703 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3705 * makefile.vms: New file.
3707 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3709 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3711 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3712 regardless of plen.
3714 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3716 * i386-dis.c (OP_OFF): Call append_prefix.
3718 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3720 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3721 unsigned long to silence a warning from the Solaris PowerPC
3722 compiler.
3724 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3726 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3728 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3730 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3731 (X_IMM13): Delete.
3732 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3733 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3734 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3735 cpush, cpusha, cpull sparclet insns.
3737 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3739 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3741 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3743 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3744 Set F_FLOAT on other floating point instructions.
3746 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3748 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3749 registers.
3750 (powerpc_opcodes): Add 860/821 specific SPRs.
3752 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3754 * configure.in: Permit --enable-shared to specify a list of
3755 directories. Set and substitute BFD_PICLIST.
3756 * configure: Rebuild.
3757 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3758 uses. Set to @BFD_PICLIST@.
3760 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3762 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3763 not "abs", which may be needed for the absolute in something
3764 like btst #0,@10:8. Print L_3 immediates separately from other
3765 immediates. Change ABSMOV reference to ABS8MEM.
3767 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3769 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3770 (current_arch_mask): New static global.
3771 (compute_arch_mask): New static function.
3772 (print_insn_sparc): Delete sparc_v9_p. New static local
3773 current_mach. Resort opcode table if current_mach changes.
3774 Generalize "insn not supported" test.
3775 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3776 Delete test for v9/!v9.
3777 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3778 (v6notlet): Define.
3779 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3780 (brfcx): Renamed to FBRX.
3781 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3782 coprocessor mnemonics are not supported on the sparclet).
3783 (condf): Renamed to CONDF.
3784 (SLCBCC2): Delete F_ALIAS flag.
3786 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3788 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3789 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3791 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3793 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3794 that the shared library version number is set correctly.
3796 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3798 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3799 Miles Bader <miles@gnu.ai.mit.edu>.
3800 * configure: Rebuild.
3802 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3804 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3805 malloc.
3807 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3809 * configure: Rebuild with autoconf 2.8.
3811 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3813 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3814 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3816 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3818 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3819 since they appear as targets in Makefile.in.
3820 * configure: Rebuild.
3822 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3824 * mpw-make.sed: Edit out shared library support bits.
3826 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3828 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3829 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3830 (sparc_opcodes): Add sparclet insns.
3831 (sparclet_cpreg_table): New static local.
3832 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3833 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3835 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3837 * i386-dis.c (index16): New static variable.
3838 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3839 other way around.
3840 (OP_indirE): Return result of OP_E.
3841 (OP_E): Check for 16 bit addressing mode, and disassemble
3842 correctly. Optimised 32 bit case a little. Don't print
3843 "(base,index,scale)" when sib specifies only an offset.
3845 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3847 * configure.in: Set and substitute SHLIB_DEP.
3848 * configure: Rebuild.
3849 * Makefile.in (SHLIB_DEP): New variable.
3850 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3851 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3852 COMMON_SHLIB, add them to piclist with appropriate modifications.
3853 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3854 here: just use piclist.
3856 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3858 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3859 (print_insn_sparc): Rewrite v9/not-v9 tests.
3860 (compare_opcodes): Likewise.
3861 * sparc-opc.c (MASK_<ARCH>): Define.
3862 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3863 (sparclet,v6notv9): Define.
3864 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3865 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3867 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3869 * configure.in: Call AC_PROG_CC before configure.host.
3870 * configure: Rebuild.
3872 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3874 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3876 * i386-dis.c (onebyte_has_modrm): New static array.
3877 (twobyte_has_modrm): New static array.
3878 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3880 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3882 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3883 $(SHLINK).
3885 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3887 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3888 doesn't conflict.
3890 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3892 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3893 m68010up, not just m68020up | cpu32.
3895 * Makefile.in (SONAME): New variable.
3896 ($(SHLINK)): Make a link to the transformed name, as well.
3897 (stamp-tshlink): New target.
3898 (install): Skip stamp-tshlink during install.
3900 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3902 * configure.in: Call AC_ARG_PROGRAM.
3903 * configure: Rebuild.
3904 * Makefile.in (program_transform_name): New variable.
3905 (install): Transform library name before installing it.
3907 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3909 * i960-dis.c (mem): Add HX dcinva instruction.
3911 Support for building as a shared library, based on patches from
3912 Alan Modra <alan@spri.levels.unisa.edu.au>:
3913 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3914 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3915 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3916 * configure: Rebuild.
3917 * Makefile.in (ALLLIBS): New variable.
3918 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3919 (COMMON_SHLIB, SHLINK): New variables.
3920 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3921 (STAGESTUFF): Remove variable.
3922 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3923 (stamp-piclist, piclist): New targets.
3924 ($(SHLIB), $(SHLINK)): New targets.
3925 ($(OFILES)): Depend upon stamp-picdir.
3926 (disassemble.o): Build twice if PICFLAG is set.
3927 (MOSTLYCLEAN): Add pic/*.o.
3928 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3929 (distclean): Remove pic and stamp-picdir.
3930 (install): Install shared libraries.
3931 (stamp-picdir): New target.
3933 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3935 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3936 Print unknown instruction as "unknown", rather than in hex.
3938 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3940 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3942 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3944 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3946 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3948 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3949 when necessary. From Ulrich Drepper
3950 <drepper@myware.rz.uni-karlsruhe.de>.
3952 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3954 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3955 sparc_num_opcodes. Update architecture enum values.
3956 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3957 (sparc_opcode_lookup_arch): New function.
3958 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3959 (sparc_opcodes): Add v9a shutdown insn.
3961 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3963 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3964 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3965 architecture.
3966 (print_insn_sparc64): Deleted.
3967 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3968 print_insn_sparc.
3970 * sparc-opc.c (architecture_pname): Add v9a.
3972 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3974 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3975 incorrectly defined as 0x16 when it should be 0x15.
3976 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3977 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3978 excb (exception barrier) which is defined in the Alpha
3979 Architecture Handbook version 2.
3980 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3981 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3982 disassembled as or, for example.
3984 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3986 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3987 (_print_insn_mips): Change i from int to unsigned int.
3989 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3991 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3992 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3994 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3996 * i386-dis.c: Added Pentium Pro instructions.
3998 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4000 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4001 being for Power2.
4003 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4005 * sh-opc.h (sh_nibble_type): Added REG_B.
4006 (sh_arg_type): Added A_REG_B.
4007 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4008 and stc.l opcodes.
4009 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4011 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4013 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4015 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4017 * Makefile.in (distclean): Remove stamp-h. From Ronald
4018 F. Guilmette <rfg@monkeys.com>.
4020 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4022 From David Mosberger-Tang <davidm@azstarnet.com>:
4023 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4024 instruction.
4026 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4028 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4029 (sh_table): Added many SH3 opcodes.
4030 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4032 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4034 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4035 (subco,subco.): Mark this PPC, not PPCCOM.
4037 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4039 * configure: Rebuild with autoconf 2.7.
4041 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4043 * configure: Rebuild with autoconf 2.6.
4045 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4047 * configure.in: Sort list of architectures. Accept but do nothing
4048 for alliant, convex, pyramid, romp, and tahoe.
4050 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4052 * a29k-dis.c (print_special): Change num to unsigned int.
4054 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4056 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4057 shifting it.
4059 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4061 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4062 * configure: Rebuilt.
4064 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4066 * configure.in: Add case for bfd_i860_arch.
4067 * configure: Rebuild.
4069 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4071 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4072 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4073 (NEXTDOUBLE): Likewise.
4074 (print_insn_m68k): Don't match fmoveml if there is more than one
4075 register in the list.
4076 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4078 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4080 * m68k-opc.c: Use #W rather than #w.
4081 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4083 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4085 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4086 and likewise for all the dbxx opcodes.
4088 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4090 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4092 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4094 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4095 the VR4100 specific instructions to the mips_opcodes structure.
4097 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4099 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4100 ugly Metrowerks bug in CW6, is fixed in CW7.
4102 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4104 * ppc-opc.c (whole file): Add flags for common/any support.
4106 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4108 * Makefile.in (BISON): Remove macro.
4109 (FLAGS_TO_PASS): Remove BISON.
4111 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4113 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4115 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4116 instructions that take no args by looking at the match mask.
4117 (print_insn_arg): Always print "%" before register names.
4118 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4119 [case '_']: Don't print "@#" before address.
4120 [case 'J']: Use "%s" as format string, not register name.
4121 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4123 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4125 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4126 name correctly.
4128 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4130 From David Mosberger-Tang <davidm@azstarnet.com>
4132 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4133 (alpha_insn_set): added definitions for VAX floating point
4134 instructions (Unix compilers don't generate these, but handcoded
4135 assembly might still use them).
4137 * alpha-dis.c (print_insn_alpha): added support for disassembling
4138 the miscellaneous instructions in the Alpha instruction set.
4140 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4142 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4143 no longer create sysdep.h, sed ppc-opc.c to work around a
4144 serious Metrowerks C bug.
4145 * mpw-make.in: Remove.
4146 * mpw-make.sed: New file, used by mpw-configure to edit
4147 Makefile.in into an MPW makefile.
4149 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4151 * Makefile.in (maintainer-clean): New synonym for realclean.
4153 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4155 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4156 which use '0', '1', and '2' instead. Specify the proper size for
4157 a pmove immediate operand. Correct the pmovefd patterns to be
4158 moves to a register, not from a register.
4159 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4161 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4163 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4164 %psr, %wim, %tbr as F_NOTV9.
4166 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4168 * Makefile.in (Makefile): Just rebuild Makefile when running
4169 config.status.
4170 (config.h, stamp-h): New targets.
4171 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4172 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4173 rebuilding config.h.
4174 * configure: Rebuild.
4176 * mips-opc.c: Change unaligned loads and stores with "t,A"
4177 operands to use "t,A(b)".
4179 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4181 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4183 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4185 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4186 until 3 instead of until 2.
4188 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4190 * Makefile.in (ALL_CFLAGS): Define.
4191 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4192 (MOSTLYCLEAN): Add config.log.
4193 (distclean): Don't remove config.log.
4194 * configure.in: Substitute HDEFINES.
4195 * configure: Rebuild.
4197 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4199 * sh-opc.h (sh_arg_type): Add F_FR0.
4200 (sh_table, case fmac): Add F_FR0 as first argument.
4202 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4204 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4206 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4208 * sparc-dis.c: Remove all references to NO_V9.
4210 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4212 * aclocal.m4: Just include ../bfd/aclocal.m4.
4213 * configure: Rebuild.
4215 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4217 * sparc-dis.c (X_DISP19): Define.
4218 (print_insn, case 'G'): Use it.
4219 (print_insn, case 'L'): Sign extend displacement.
4221 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4223 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4224 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4225 host_makefile_frag or frags.
4226 * aclocal.m4: New file.
4227 * configure: Rebuild.
4228 * Makefile.in (INSTALL): Set to @INSTALL@.
4229 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4230 (INSTALL_DATA): Set to @INSTALL_DATA@.
4231 (AR): Set to @AR@.
4232 (AR_FLAGS): Set to rc rather than qc.
4233 (CC): Define as @CC@.
4234 (CFLAGS): Set to @CFLAGS@.
4235 (@host_makefile_frag@): Remove.
4236 (config.status): Remove dependency upon @frags@.
4238 * configure.in: ../bfd/config.bfd now just sets shell variables.
4239 Use them rather than looking through target Makefile fragments.
4240 * configure: Rebuild.
4242 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4244 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4246 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4248 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4249 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4250 sparc64 insns.
4252 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4253 (lookup_{name,value}): New functions.
4254 (prefetch_table): New static local.
4255 (sparc_{encode,decode}_prefetch): New functions.
4256 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4258 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4260 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4261 instructions.
4263 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4265 * sh-dis.c: Correct comment on first line of file.
4267 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4269 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4271 * sparc-opc.c (asi, membar): New static locals.
4272 (sparc_{encode,decode}_{asi,membar}): New functions.
4273 (sparc_opcodes, membar insn): Fix.
4274 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4275 Support decoding of membar masks.
4276 (X_MEMBAR): Define.
4278 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4280 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4282 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4284 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4285 and likewise for the other branches. Add bhs as an alias for bcc,
4286 and likewise for the size variants. Add dbhs as an alias for
4287 dbcc.
4289 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4291 * sh-opc.h (FP sts instructions): Update to match reality.
4293 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4295 * m68k-dis.c: (fpcr_names): Add % before all register names.
4296 (reg_names): Likewise.
4297 (print_insn_arg): Don't explicitly print % before register names.
4298 Add % before register names in static array names. In case 'r',
4299 print data registers as `@(Dn)', not `Dn@'. When printing a
4300 memory address, don't print @# before it.
4301 (print_indexed): Change base_disp and outer_disp from int to
4302 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4303 syntax. Sign extend 8 byte displacement correctly.
4304 (print_base): Print using MIT syntax. Print zpc when appropriate.
4305 Change parameter disp from int to bfd_vma.
4307 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4308 for jsr.
4310 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4312 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4313 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4314 * sh-opc.h (sh_arg_type): Add new operand types.
4315 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4317 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4319 * Makefile.in (distclean): Remove generated file config.h.
4321 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4323 * Makefile.in (distclean): Remove generated file config.h.
4325 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4327 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4328 Clean up tables.
4329 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4330 (opcode): Remove.
4331 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4332 rather than numopcodes. Use m68k_opcodes rather than removed
4333 opcode function. Don't check F_ALIAS.
4334 (print_insn_arg): Change first parameter to be const char *.
4335 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4336 (m68k-opc.o): New target.
4337 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4338 * configure: Rebuild.
4340 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4342 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4343 (opcode_bits, opcode_hash_table): New variables.
4344 (opcodes_initialized): Renamed from opcodes_sorted.
4345 (build_hash_table): New function.
4346 (is_delayed_branch): Use hash table.
4347 (print_insn): Renamed from print_insn_sparc, made static.
4348 Build and use hash table. If !sparc64, ignore sparc64 insns,
4349 and vice-versa if sparc64.
4350 (print_insn_sparc, print_insn_sparc64): New functions.
4351 (compare_opcodes): Move sparc64 opcodes to end.
4352 Print commutative insns with constant second.
4353 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4355 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4357 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4358 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4359 avoids printing a delay slot in a delay slot.
4360 * sh-opc.h (sh_table): Fully bracket last entry.
4362 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4364 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4366 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4368 * configure.in: Get host_makefile_frag from ${srcdir}.
4370 * configure.in: Autoconfiscated. Check for string[s].h. Create
4371 config.h from config.in. Don't set up sysdep.h link.
4372 * sysdep.h: New file.
4373 * configure, config.in: New files, generated from configure.in.
4374 * Makefile.in: Updated to be processed autoconf-style.
4375 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4376 (Makefile): Depend on config.status.
4377 (config.status): New rule.
4378 * configure.bat: Update Makefile substitutions.
4380 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4382 * mips-opc.c (L1): Define.
4383 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4384 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4385 and wb.
4387 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4389 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4390 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4391 have multiple add units but only a single logical unit.
4393 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4394 shifted by 18, without any insertion or extraction function.
4395 (insert_cr, extract_cr): Remove.
4397 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4399 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4400 register names.
4402 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4404 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4405 * sh-opc.h: Add copyright.
4407 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4409 * Makefile.in (crunch-m68k): Delete extra target accidentally
4410 checked in a while ago.
4412 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4414 * sh-opc.h (sh_table): Add SH3 support.
4416 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4418 * sh-opc.h: Added bsrf and braf.
4420 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4422 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4423 bogus [ls]fm{ea,fd} patterns.
4425 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4426 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4427 initialize it from memory. Make function static.
4428 (print_insn_{big,little}_arm): New functions.
4429 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4430 the correct endianness.
4432 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4434 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4435 enum list.
4437 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4439 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4440 17th, so that it builds again using GCC as the compiler.
4442 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4444 * mips-dis.c (print_insn_little_mips): Cast return value from
4445 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4446 expects an unsigned long, and that might be fewer words of
4447 argument storage (e.g., if bfd_vma is long long on a 32-bit
4448 machine).
4449 (print_insn_big_mips): Likewise with bfd_getb32 value.
4450 (_print_insn_mips): Now static.
4452 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4454 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4455 gcc memory hog problem with initializer is fixed.
4457 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4459 Merge in support for Mac MPW as a host.
4460 (Old change descriptions retained for informational value.)
4462 * mpw-config.in (archname): Compute from the config.
4463 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4465 * mpw-config.in (target_arch): Compute from canonical target.
4466 (m68k, mips, powerpc, sparc): Add architectures.
4467 * mpw-make.in (disassemble.c.o): Add.
4468 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4470 * mpw-config.in (BFD_MACHINES): Set to a default value.
4471 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4473 * mpw-make.in (CSEARCH): Add extra-include to search path.
4475 * mpw-config.in (varargs.h): Don't create.
4476 (sysdep.h): Create using forward-include.
4477 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4479 * mpw-config.in: New file, MPW version of configure.in.
4480 * mpw-make.in: New file, MPW version of Makefile.in.
4482 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4484 * alpha-dis.c (print_insn_alpha): Put empty statement after
4485 default label.
4487 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4489 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4490 (low_sign_extend): Likewise.
4491 (get_field): Delete unused function.
4492 (set_field, deposit_14, deposit_21): Likewise.
4494 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4496 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4497 (guy@netapp.com).
4499 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4501 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4503 * alpha-opc.h (OSF_ASMCODE): define
4504 print pal-code names as defined in App C of the
4505 Alpha Architecture Reference Manual
4507 * alpha-dis.c: cleaned up output
4508 print stylized code forms as defined in App A.4.3 of the
4509 Alpha Architecture Reference Manual
4511 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4513 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4514 `rfe'.
4515 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4516 'N', and 'M'.
4518 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4520 * m68k-dis.c (opcode): New function. Returns address of opcode
4521 table entry given index, even if the opcode table was split to
4522 work around gcc bugs.
4523 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4524 directly.
4525 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4526 (reg_names): Now const.
4527 (print_insn_arg): Arrays cacheFieldName and names now const.
4528 (print_indexed): Array scales now const.
4530 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4532 * ppc-opc.c: Sort recently added instructions by minor opcode
4533 number within major opcode number.
4535 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4537 * hppa-dis.c: Include libhppa.h.
4539 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4541 * mips-opc.c: Change dli to use M_DLI, and add dla.
4543 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4545 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4547 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4549 * mips-opc.c: Add r4650 mul instruction.
4551 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4553 * mips-opc.c: Add uld and usd macros for unaligned double load and
4554 store.
4556 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4558 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4559 mfdcr, mtdcr, icbt, iccci.
4561 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4563 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4564 signed char fields to shorts, more portable.
4566 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4568 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4569 char fields as signed chars, since they may have negative values.
4571 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4573 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4574 (mycroft@netbsd.org).
4576 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4578 From "Logg, Ed" <elogg@ea.com>:
4579 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4580 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4581 value.
4583 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4585 * ppc-opc.c: Changes based on patch from David Edelsohn
4586 <edelsohn@mhpcc.edu>.
4587 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4588 SPR.
4589 (FXM_MASK): Define.
4590 (insert_tbr): New static function.
4591 (extract_tbr): New static function.
4592 (XFXFXM_MASK, XFXM): Define.
4593 (XSPRBAT_MASK, XSPRG_MASK): Define.
4594 (powerpc_opcodes): Add instructions to access special registers by
4595 name. Add mtcr and mftbu.
4597 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4599 * mips-opc.c (P3): Define.
4600 (mips_opcodes): Add mad and madu.
4602 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4604 * configure.in: Add W65 support.
4605 * disassemble.c: Likewise.
4606 * w65-opc.h, w65-dis.c: New files.
4608 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4610 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4611 immediates.
4613 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4615 * mips-opc.c: Add dli as a synonym for li.
4617 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4619 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4620 print something for reserved opcode values, even if it won't
4621 assemble again.
4623 * mips-dis.c (_print_insn_mips): When initializing, shift right
4624 and mask, to avoid sign extension problems on the Alpha.
4626 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4627 control registers.
4629 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4631 * sh-opc.h (mov.l gbr): Get direction right.
4632 * sh-dis.c (print_insn_shx): New function.
4633 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4634 print opcodes with right byte order.
4636 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4638 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4639 to avoid conflicts with getopt.
4641 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4643 * hppa-dis.c (print_insn_hppa): Read the instruction using
4644 bfd_getb32, so that it works on a little endian or 64 bit host.
4645 Remove unused local variable op.
4647 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4649 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4650 addu does not work correctly if -mips3.
4652 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4654 * a29k-dis.c (print_special): Add special register names defined
4655 on 29030, 29040 and 29050.
4656 (print_insn): Handle new operand type 'I'.
4658 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4660 * Makefile.in (INSTALL): Use top level install.sh script.
4662 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4664 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4665 that it works on a little endian host.
4667 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4669 * configure.in: Use ${config_shell} when running config.bfd.
4671 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4673 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4675 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4677 * a29k-dis.c (print_insn): Print the opcode.
4679 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4681 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4683 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4685 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4687 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4689 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4690 which store a value into memory.
4692 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4694 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4695 * arm-dis.c, arm-opc.h: New files.
4697 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4699 * Makefile.in (ns32k-dis.o): Add dependency.
4700 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4701 string, not as array of chars.
4703 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4705 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4707 * sparc-opc.c: Added sparclite extended FP operations, and
4708 versions of v9 impdep* instructions permitting specification of
4709 the OPF field.
4711 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4713 * i960-dis.c (reg_names): Now const.
4714 (struct sparse_tabent): New type, copied from array type in mem
4715 function.
4716 (ctrl): Local static array ctrl_tab now const.
4717 (cobr): Local static array cobr_tab now const.
4718 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4719 static variable mem_tab no longer explicitly initialized. Changed
4720 mem_init to const array of struct sparse_tabent.
4721 (reg): Local static variable reg_tab no longer explicitly
4722 initialized. Changed reg_init to const array of struct
4723 sparse_tabent.
4724 (ea): Local static array scale_tab now const.
4726 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4727 (REG_MAX): Updated.
4729 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4731 * configure.bat: the disassember needs to be enabled for
4732 "objdump -d" to work in djgpp.
4734 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4736 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4737 (invalid_float): Enabled general version, doesn't require running
4738 on ns32k host. Changed to take char* argument, and test for
4739 explicitly specified sizes, instead of using sizeof() on host CPU
4740 types.
4741 (INVALID_FLOAT): Cast first argument.
4742 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4743 list_P032, list_M032): Now const.
4744 (optlist, list_search): Made appropriate arguments now point to
4745 const.
4746 (print_insn_arg): Changed static array of one-character-string
4747 pointers into a static const array of characters; fixed sprintf
4748 statement accordingly.
4750 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4752 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4753 from distribution. A ns32k-dis.c from a previous distribution has
4754 been brought up to date and supports the new interface.
4756 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4758 * configure.in: add bfd_ns32k_arch target support.
4760 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4761 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4763 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4765 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4766 disassembly right.
4768 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4770 * h8300-dis.c, mips-dis.c: Don't use true and false.
4772 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4774 * configure.in: Change --with-targets to --enable-targets.
4776 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4778 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4779 opcodes to the first instruction with that opcode, to speed
4780 disassembly of large files. From ralphc@pyramid.com (Ralph
4781 Campbell).
4783 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4785 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4787 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4789 * configure.bat: update to latest makefile.in
4791 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4793 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4794 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4795 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4796 slot insn is in a delay slot.
4797 * z8k-opc.h: (resflg): Fix patterns.
4798 * h8500-opc.h Fix CR insn patterns.
4800 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4802 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4803 "cmpl" before POWER versions, so that gas -many uses them.
4805 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4807 * disassemble.c: New file.
4808 * Makefile.in (OFILES): Add disassemble.o.
4809 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4810 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4811 binutils/configure.in.
4813 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4814 opcode being examined.
4816 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4818 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4819 (insert_ral, insert_ram, insert_ras): New functions.
4820 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4821 RAS for store with update.
4823 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4825 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4826 (edelsohn@npac.syr.edu).
4828 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4831 immediate argument.
4833 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4835 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4837 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4839 * ppc-opc.c (powerpc_operands): The signedp field has been
4840 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4841 instead. Add new operand SISIGNOPT.
4842 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4843 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4844 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4845 than signedp field.
4847 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4849 * i386-dis.c (struct private): Renamed to dis_private. `private'
4850 is a reserved word for dynix cc.
4852 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4854 * configure.in: Change error message to refer to bfd/config.bfd
4855 rather than bfd/configure.in.
4857 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4859 * ppc-opc.c: Define POWER2 as short alias flag.
4860 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4861 fsqrt.
4863 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4865 * i960-dis.c (print_insn_i960): Don't read a second word for
4866 opcodes 0, 1, 2 and 3.
4868 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4870 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4872 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4874 * m68881-ext.c: Removed; no longer used.
4875 * Makefile.in: Changed accordingly.
4877 * m68k-dis.c (ext_format_68881): Don't declare.
4878 (print_insn_m68k): If an instruction uses place 'i', it uses at
4879 least four fixed bytes.
4880 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4881 extended float, convert to double using floatformat_to_double, not
4882 ieee_extended_to_double, and fetch the data before converting it.
4884 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4886 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4887 davidj@ICSI.Berkeley.EDU (David Johnson).
4889 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4891 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4892 PowerPC uses bdnz[l][a].
4894 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4896 * dis-buf.c, i386-dis.c: Include sysdep.h.
4898 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4900 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4902 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4903 by Motorola PowerPC 601 with PPC_OPCODE_601.
4904 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4905 Disassemble Motorola PowerPC 601 instructions as well as normal
4906 PowerPC instructions.
4908 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4910 * i960-dis.c (reg, mem): Just use a static array instead of
4911 calling xmalloc.
4913 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4915 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4916 condition name index if this is for a negated condition.
4918 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4919 Floating point format for 'H' operand is backwards from normal
4920 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4921 operands (fmpyadd and fmpysub), handle bizarre register
4922 translation correctly for single precision format.
4924 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4925 or 'I' operands if the next format specifier is 'M' (fcmp
4926 condition completer).
4928 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4930 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4931 single number giving a bitmask for the MB and ME fields of an M
4932 form instruction. Change NB to accept 32, and turn it into 0;
4933 also turn 0 into 32 when disassembling. Seperated SH from NB.
4934 (insert_mbe, extract_mbe): New functions.
4935 (insert_nb, extract_nb): New functions.
4936 (SC_MASK): Mask out SA and LK bits.
4937 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4938 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4939 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4940 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4941 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4942 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4943 (powerpc_macros): Define table of macro definitions.
4944 (powerpc_num_macros): Define.
4946 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4947 if PPC_OPERAND_NEXT is set.
4949 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4951 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4952 char. Retrieve contents using bfd_getl32 instead of shifting.
4954 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4956 * ppc-opc.c: New file. Opcode table for PowerPC, including
4957 opcodes for POWER (RS/6000).
4958 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4959 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4960 (CFILES): Add ppc-dis.c.
4961 (ppc-dis.o, ppc-opc.o): New targets.
4962 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4964 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4966 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4967 No space before 'u', 'f', or 'N'.
4969 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4971 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4972 farther than we should.
4974 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4976 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4978 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4980 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4982 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4983 needs it, to prevent reading past the end of a section.
4985 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4987 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4988 Removed t,A case for la; always use t,A(b) case.
4990 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4992 From Ted Lemen <mellon@pepper.ncd.com>
4993 * mips-dis.c (print_insn_arg): Handle 'k'.
4994 * mips-opc.c: Make cache use k, not t.
4996 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4998 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4999 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5000 FLOAT_FORMAT_CODE to put out floating point register names.
5002 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5004 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5006 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5008 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5010 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5012 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5013 larger than 32. Moved dsxx32 variants first for disassembler.
5015 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5017 * z8kgen.c, z8k-opc.h: Add full lda information.
5019 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5021 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5022 movb instructions. Any necessary space will be emitted by
5023 the code to handle nullification completers.
5025 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5027 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5029 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5031 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5032 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5034 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5036 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5038 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5040 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5041 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5043 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5045 * m88k-dis.c (m88kdis): comment change. Remove space after
5046 printing mnemonic.
5047 (printop): handle new arg types DEC and XREG for m88110.
5049 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5051 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5052 type for absolute branch addresses. Delete special
5053 "ble" and "be" code in 'W' operand code.
5055 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5057 * mips-opc.c: Set hazard information correctly for branch
5058 likely instructions.
5060 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5062 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5063 info->fprintf_func for printing and info->print_address_func for
5064 address output.
5066 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5068 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5070 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5072 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5073 Corrected second case of "b" for disassembler.
5075 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5077 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5078 to BFD swapping routines to correspond to BFD name changes.
5080 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5082 * mips-opc.c: Change div machine instruction to be z,s,t rather
5083 than s,t. Change div macro to be d,v,t rather than d,s,t.
5084 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5085 rem and remu which generates only the corresponding div
5086 instruction. This is for compatibility with the MIPS assembler,
5087 which only generates the simple machine instruction when an
5088 explicit destination of $0 is used.
5089 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5091 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5093 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5094 WR_31 hazard for bal, bgezal, bltzal.
5096 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5098 * hppa-dis.c (print_insn_hppa): Use print function
5099 from within the disassemble_info, not fprintf_filtered.
5101 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5103 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5104 Law, law@cs.utah.edu.)
5106 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5108 * mips-opc.c ("absu"): Removed.
5109 ("dabs"): Added.
5111 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5113 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5114 Changed hazard information to distinguish between memory load
5115 delays and coprocessor load delays.
5117 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5119 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5121 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5123 * configure.in: Don't pass cpu to config.bfd.
5125 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5127 * m88k-dis.c (m88kdis): Make class unsigned.
5129 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5131 * alpha-dis.c (print_insn_alpha): One branch format case was
5132 missing the instruction name.
5134 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5136 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5137 Add the arch-specific auxiliary files.
5138 (OFILES): Remove the arch-specific auxiliary files
5139 and use BFD_MACHINES instead of DIS_LIBS.
5140 * configure.in: Set BFD_MACHINES based on --with-targets option.
5142 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5144 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5145 for swc1.
5147 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5149 * sparc-opc.c: Change CONST to const to deal with gcc
5150 -Dconst=__const -traditional.
5152 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5154 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5155 coprocessor instructions out of #if 0, and made them use new
5156 argument type "C".
5158 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5160 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5162 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5164 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5165 instruction, for use by the disassembler.
5167 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5168 hand-coded sign extensions that depended on 32-bit host ints.
5169 FIXME, we still depend on big-endian host bitfield ordering.
5170 (sparc_print_insn): Set the insn_info_valid field, and the
5171 other fields that describe the instruction being printed.
5173 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5175 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5176 `jmp' instead of just one of them.
5178 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5180 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5181 (fput_fp_reg_r): Renamed from fput_reg_r.
5182 (fput_fp_reg): New function.
5183 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5185 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5187 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5189 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5191 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5193 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5194 don't output a space.
5196 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5198 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5200 * mips-opc.c: New file, containing opcode table from
5201 ../include/opcode/mips.h.
5202 * Makefile.in: Add it.
5204 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5206 * m88k-dis.c: New file, moved in from gdb and changed to use the
5207 new dis-asm.h disassembler interface.
5208 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5209 (m88k-dis.o): New target.
5211 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5213 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5214 argument string const char * to correspond to opcode/mips.h.
5216 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5218 * mips-dis.c: Updated to account for name changes in new version
5219 of opcode/mips.h.
5220 * Makefile.in: Added header file dependencies.
5222 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5224 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5226 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5228 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5229 extend, rather than shifts.
5231 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5233 * Makefile.in: Undo 15 June change.
5235 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5237 * m68k-dis.c (print_insn_arg): Change return value to byte count
5238 or error code.
5239 * m68k-dis.c: Re-write to detect invalid operands before
5240 printing anything, so we can handle this the same way we
5241 handle invalid opcodes.
5243 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5245 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5247 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5249 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5250 header files.
5252 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5254 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5256 * configure.in: Do make sysdep.h link.
5257 * Makefile.in: Search ../include. Don't search ../bfd.
5259 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5261 Changes from Jeff Law, law@cs.utah.edu:
5262 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5263 Do not print a space before the completers specified by
5264 'a' and 'd'.
5266 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5268 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5269 defined, since gdb has been fixed.
5271 Changes from Jeff Law, law@cs.utah.edu:
5272 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5273 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5274 be a *disassemble_info, not a *FILE.
5275 * hppa-dis.c: Support 'd', '!', and 'a'.
5276 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5277 * hppa-dis.c: Delete cases which are no longer needed.
5279 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5281 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5283 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5285 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5286 H8/300-H opcodes.
5288 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5290 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5291 * configure.in: No longer need to configure to get sysdep.h.
5293 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5295 * Patches from Jeffrey Law <law@cs.utah.edu>.
5296 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5297 templates for 1.1 FP computational instructions.
5299 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5301 * h8500-dis.c (print_insn_h8500): Address argument is type
5302 bfd_vma.
5303 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5304 Ditto.
5306 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5307 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5309 * sparc-dis.c (compare_opcodes): Move static declaration to
5310 top-level.
5312 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5314 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5315 instruction, remove unimp hack from 'l' argument.
5317 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5319 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5320 happy.
5322 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5324 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5325 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5326 instructions.
5328 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5330 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5331 arrays of string pointers to 2-d arrays of chars, to save
5332 space.
5334 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5336 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5337 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5339 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5341 * hppa-dis.c: New file from Utah, adapted to new disassembler
5342 calling interface.
5343 * Makefile.in: Include it.
5345 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5347 * sh-dis.c, sh-opc.h: New files.
5349 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5351 * alpha-dis.c, alpha-opc.h: New files.
5353 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5355 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5356 value.
5358 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5360 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5362 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5364 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5365 const.
5367 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5369 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5370 and double percent signs a few places.
5372 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5374 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5375 Use info->print_address_func not print_address.
5377 * dis-buf.c (generic_print_address): New function.
5379 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5381 * Makefile.in: Add sparc-dis.c.
5382 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5383 From GDB:
5384 Add `add' instruction to the set that get checked
5385 for a preceding `sethi' in order to print an absolute address.
5386 * (print_insn): Disassembly prefers real instructions.
5387 (is_delayed_branch): Speed up.
5388 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5389 Still missing some float ops, and needs testing.
5390 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5391 F_ALIAS. Use printf, not fprintf, when not passing a file
5392 pointer...
5393 (compare_opcodes): Check that identical instructions have
5394 identical opcodes, complain otherwise.
5395 From binutils:
5396 * New 'm' arg.
5397 * Include reg_names.
5398 From neither:
5399 Use dis-asm.h/read_memory_func interface.
5401 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5403 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5404 deliberately return non-zero to setjmp from longjmp. Otherwise
5405 this code fails to compile.
5407 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5409 * m68k-dis.c: Fix prototype for fetch_arg().
5411 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5413 * dis-buf.c: New file, for new read_memory_func interface.
5414 Makefile.in (OFILES): Include it.
5415 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5416 Use new read_memory_func interface.
5418 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5420 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5421 * h8500-opc.h: Fix couple of opcodes.
5423 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5425 * Makefile.in: add dvi & installcheck targets
5427 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5429 * Makefile.in: Update for h8500-dis.c.
5431 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5433 * h8500-dis.c, h8500-opc.h: New files
5435 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5437 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5438 ../include/dis-asm.h.
5439 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5440 and ../gdb/m68k-pinsn.c).
5441 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5442 and ../gdb/i386-pinsn.c).
5443 * m68881-ext.c: New file. Moved definition of
5444 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5445 * Makefile.in: Adjust for new files.
5446 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5447 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5448 can be dis-assembled.
5450 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5452 * mips-dis.c (print_insn_arg): Now returns void.
5454 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5456 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5457 files that use the macros.
5459 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5461 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5462 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5463 (CFILES): Added mips-dis.c.
5465 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5467 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5468 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5470 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5472 * Makefile.in: Improve *clean rules.
5473 * configure.in: Allow a default host.
5475 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5477 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5478 files include other sysdep files
5480 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5482 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5484 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5486 * configure.in: For host support, use ../bfd/configure.host
5487 so it stays in sync with the ../bfd/hosts database.
5489 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5491 * configure.in: use cpu-vendor-os triple instead of nested cases
5493 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5495 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5496 *always* the wrong one.
5498 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5500 * z8kgen.c: added copyright info
5502 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5504 * z8k-dis.c (unparse_instr): prettier tabs
5505 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5507 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5509 * configure.in: Add ncr* configuration.
5510 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5511 picayune ANSI compilers happy.
5513 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5515 * configure.in (i386): Make i386 and i486 synonymous for now.
5516 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5518 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5520 * Makefile.in (install): Fix typo.
5522 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5524 * Makefile.in (make): Remove obsolete crud.
5525 (sparc-opc.o): Avoid Sun Make VPATH bug.
5527 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5529 * Makefile.in: since there are no SUBDIRS, remove rule and
5530 references of subdir_do.
5532 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5534 * Makefile.in (install): Get the library name right here too.
5535 Don't install bfd.h, since it's unrelated to this library. No
5536 subdirs to recurse into, either.
5537 (CFILES): The source file has a .c suffix, not .o.
5539 * sparc-opc.c: New file, moved from BFD.
5540 * Makefile.in (OFILES): Build it.
5542 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5544 * z8k-dis.c: fixed forward refferences of some declarations.
5546 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5548 * Makefile.in: get the name of the library right
5550 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5552 * z8k-dis.c: knows how to disassemble z8k stuff
5553 * z8k-opc.h: new file full of z8000 opcodes
5555 \f
5556 Local Variables:
5557 version-control: never
5558 End: