| blob | 806f5dfc9936bf45d0c9abdf8255d609545bcd2c |
1 2005-06-30 Ben Elliston <bje@gnu.org>
3 * Makefile.am (check-DEJAGNU): Don't search for expect.
4 * Makefile.in: Regenerate.
6 2005-06-30 Ben Elliston <bje@gnu.org>
8 * Makefile.am (EXPECT): Set to expect.
9 (RUNTEST): Likewise, set to runtest.
10 * Makefile.in: Regenerate.
12 2005-06-23 Ben Elliston <bje@gnu.org>
14 * config/m68k-parse.h: Use ISO C90.
15 * config/m68k-parse.y: Likewise.
16 * config/tc-m68k.h: Likewise.
18 2005-06-20 H.J. Lu <hongjiu.lu@intel.com>
20 PR 1013
21 * config/tc-i386.c (md_assemble): Don't call optimize_disp on
22 movabs.
23 (optimize_disp): Optimize only if possible. Don't use 64bit
24 displacement on non-constants and do same on constants if
25 possible.
27 2005-06-17 Jan Beulich <jbeulich@novell.com>
29 * config/tc-i386.c (reloc): Also handle BFD_RELOC_64_PCREL.
30 (tc_i386_fix_adjustable): Include BFD_RELOC_X86_64_GOTOFF64,
31 BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64.
32 (output_disp): Do GOTPC conversion also for BFD_RELOC_X86_64_32S
33 and BFD_RELOC_32_PCREL. Use BFD_RELOC_X86_64_GOTPC32 instead of
34 aborting.
35 (output_imm): Do GOTPC conversion also for BFD_RELOC_X86_64_32S.
36 Use BFD_RELOC_X86_64_GOTPC32 instead of aborting.
37 (tc_gen_reloc): Do GOTPC conversion also for BFD_RELOC_32_PCREL.
38 Use BFD_RELOC_X86_64_GOTPC32 instead of aborting. Also handle
39 BFD_RELOC_X86_64_GOTOFF64, BFD_RELOC_X86_64_GOTPC32,
40 BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64. Also
41 convert 8-byte pc-relative relocations.
42 (lex_got): Use BFD_RELOC_X86_64_GOTOFF64 for 64-bit @gotoff.
43 (i386_validate_fix): Likewise.
44 (x86_cons): Also handle quad values in 64-bit mode.
45 (i386_displacement): Also handle BFD_RELOC_X86_64_GOTOFF64.
46 (md_apply_fix): Include BFD_RELOC_X86_64_DTPOFF64 and
47 BFD_RELOC_X86_64_TPOFF64 in the TLS check. Also convert BFD_RELOC_64
48 to pc-relative variant. Also check for BFD_RELOC_64_PCREL.
50 2005-06-13 Zack Weinberg <zack@codesourcery.com>
52 * config/tc-arm.c (find_real_start): Check S_IS_LOCAL on
53 symbolP as well as for names with a leading dot. Use ACONCAT.
54 (md_apply_fix): For branch relocations, only replace value
55 with fixP->fx_offset (under #ifdef OBJ_ELF) when !fixP->fx_done.
56 (arm_force_relocation): Remove #ifdef OBJ_ELF case.
57 * config/tc-arm.h (LOCAL_LABEL): Remove unnecessary parentheses.
58 (LOCAL_LABEL_PREFIX): Don't define.
60 2005-06-10 Alan Modra <amodra@bigpond.net.au>
62 * config/tc-hppa.c (pa_block): Allocate just one byte for the
63 fill pattern.
65 2005-06-08 James E Wilson <wilson@specifixinc.com>
67 PR 994
68 * config/tc-ia64.c (slot_index): Revert last change. If first_frag
69 is NULL, then emit a warning, and return the current index.
71 2005-06-08 Tomas Hurka <tom@hukatronic.cz>
73 PR 991
74 * config/tc-m68k.c (m68k_ip): Test for insn compatiblity using a
75 temporary copy of the operands array so that changes can be safely
76 backed out if the insn does not match.
77 (m68k_compare_opcode): Shortcut the test when the parameters are
78 the same. Return 1 if the names match but the second opcode is
79 further on in the array than the first.
81 2005-06-08 Nick Clifton <nickc@redhat.com>
83 PR 994
84 * config/tc-ia64.c (slot_index): Check for a NULL first_frag.
86 2005-06-08 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
88 * config/tc-m32r.c (use_parallel): Change default value from 1 to 0.
90 2005-06-07 Aldy Hernandez <aldyh@redhat.com>
91 Michael Snyder <msnyder@redhat.com>
92 Stan Cox <scox@redhat.com>
94 * configure.in: Add ms1 case.
96 * configure: Regenerate.
98 * configure.tgt: Add ms1 case.
100 2005-06-07 Bob Wilson <bob.wilson@acm.org>
102 * config/tc-xtensa.h (resource_table): Change units to unsigned chars.
103 * config/tc-xtensa.c (new_resource_table): Likewise.
104 (resize_resource_table): Likewise.
105 (release_resources): Fix assertion for unsigned values.
107 2005-06-07 Zack Weinberg <zack@codesourcery.com>
109 * cgen.c, cgen.h, tc.h, write.c, config/obj-coff.c
110 * config/tc-a29k.c, config/tc-alpha.c, config/tc-alpha.h
111 * config/tc-arc.c, config/tc-arc.h, config/tc-arm.c
112 * config/tc-arm.h, config/tc-avr.c, config/tc-avr.h
113 * config/tc-cris.c, config/tc-crx.c, config/tc-d10v.c
114 * config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h
115 * config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.h
116 * config/tc-frv.c, config/tc-frv.h, config/tc-h8300.c
117 * config/tc-h8500.c, config/tc-hppa.c, config/tc-hppa.h
118 * config/tc-i370.c, config/tc-i370.h, config/tc-i386.c
119 * config/tc-i386.h, config/tc-i860.c, config/tc-i860.h
120 * config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c
121 * config/tc-ip2k.c, config/tc-ip2k.h, config/tc-iq2000.c
122 * config/tc-iq2000.h, config/tc-m32r.c, config/tc-m32r.h
123 * config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c
124 * config/tc-m68k.h, config/tc-m88k.c, config/tc-maxq.c
125 * config/tc-mcore.c, config/tc-mcore.h, config/tc-mips.c
126 * config/tc-mips.h, config/tc-mmix.c, config/tc-mn10200.c
127 * config/tc-mn10300.c, config/tc-msp430.c, config/tc-ns32k.c
128 * config/tc-openrisc.h, config/tc-or32.c, config/tc-or32.h
129 * config/tc-pdp11.c, config/tc-pj.c, config/tc-pj.h
130 * config/tc-ppc.c, config/tc-ppc.h, config/tc-s390.c
131 * config/tc-s390.h, config/tc-sh64.c, config/tc-sh.c
132 * config/tc-sh.h, config/tc-sparc.c, config/tc-sparc.h
133 * config/tc-tahoe.c, config/tc-tic30.c, config/tc-tic4x.c
134 * config/tc-tic54x.c, config/tc-tic80.c, config/tc-v850.c
135 * config/tc-v850.h, config/tc-vax.c, config/tc-vax.h
136 * config/tc-w65.c, config/tc-xstormy16.c, config/tc-xstormy16.h
137 * config/tc-xtensa.c, config/tc-z8k.c:
138 Replace all instances of the string "_apply_fix3" with
139 "_apply_fix".
140 * po/POTFILES.in, po/gas.pot: Regenerate.
142 2005-06-08 Alan Modra <amodra@bigpond.net.au>
144 * Makefile.am: Run "make dep-am".
145 (POTFILES): Remove GAS_CFILES.
146 * Makefile.in: Regenerate.
148 2005-06-07 David Ung <davidu@mips.com>
150 * config/tc-mips.c (mips_cpu_info_table): Add cpu names m4k, 24k,
151 24kc, 24kf and 24kfx under MIPS32 release 2.
153 2005-06-04 Nick Clifton <nickc@redhat.com>
155 * config/tc-arm.c (CE, C3, CM, UE, UF): Redefine without reference
156 to their Thumb-enabled equivalents.
158 2005-06-01 Maciej W. Rozycki <macro@linux-mips.org>
160 * config/tc-mips.c (load_register): Add leading "0x" to the
161 output of sprintf_vma().
162 (macro): Likewise.
164 2005-06-01 Nick Clifton <nickc@redhat.com>
166 * config/tc-arm.c (TxCE, TxC3, TxCM, TUE, TUF): Remove redundant
167 test for the presence of thumb version of the parsing functions
168 since they must always exist and the test generates a compile time
169 warning message.
171 2005-05-31 Richard Henderson <rth@redhat.com>
173 * config/tc-alpha.c (O_lituse_jsrdirect): New.
174 (alpha_reloc_op): Add it.
175 (debug_exp): Handle it.
176 (DUMMY_RELOC_LITUSE_JSRDIRECT): New.
177 (emit_insn): Handle it.
178 * doc/c-alpha.texi (Alpha-Relocs): Document lituse_jsrdirect.
180 2005-05-31 Christian Groessler <chris@groessler.org>
182 * write.c (dump_section_relocs): Convert to ISO-C.
183 (write_relocs): Avoid signed/unsigned and fprintf argument
184 warnings in debug code.
186 2005-05-26 Zack Weinberg <zack@codesourcery.com>
188 * config/tc-arm.h (TC_FIX_TYPE): Change to int.
189 (TC_INIT_FIX_DATA): Initialize to 0, not NULL.
190 * config/tc-arm.c (fix_new_arm): Remove now-unnecessary cast.
191 (md_apply_fix3): Delete fix_is_thumb variable; refer to
192 fixP->tc_fix_data directly in the sole place it was used.
193 Explicitly truncate value, *valP, fixP->fx_addnumber, and
194 fixP->fx_offset to 32 bits, for consistent behavior between 32-
195 and 64-bit hosts.
197 2005-05-27 Jan Beulich <jbeulich@novell.com>
199 * config/tc-ia64.c (struct proc_pending): New.
200 (unwind): Replace proc_start with proc_pending.
201 (unwind_diagnostic): Check unwind.proc_pending.sym.
202 (dot_proc): Replace unwind.proc_start with unwind.proc_pending.sym.
203 Check if previous proc not closed. Record all entry points.
204 (dot_endp): Replace unwind.proc_start with unwind.proc_pending.sym.
205 Set symbol sizes for entry points recorded in dot_proc. Check
206 arguments for consistency with respective .proc's.
207 (md_assemble): Replace unwind.proc_start with
208 unwind.proc_pending.sym.
210 2005-05-27 Jan Beulich <jbeulich@novell.com>
212 * config/tc-ia64.c (emit_one_bundle): Restrict scope of ptr, end_ptr,
213 and last_ptr. Check all in-use slots for first one with non-NULL
214 unwind_record. Don't reload end_ptr before second update round.
216 2005-05-26 James E Wilson <wilson@specifixinc.com>
218 * config/tc-ia64.c (extra_goodness): Update comment.
219 (md_begin): Add debugging code to print best_template table.
221 2005-05-25 Jan Beulich <jbeulich@novell.com>
223 * config/tc-ia64.c (md_begin): Don't try to match slot 2 of an MLX
224 template.
226 2005-05-25 Jan Beulich <jbeulich@novell.com>
228 * config/tc-ia64.c (ia64_gen_real_reloc_type): Also handle
229 BFD_RELOC_UNUSED when determining the width of the reloc.
231 2005-05-25 Jan Beulich <jbeulich@novell.com>
233 * config/tc-ia64.c (dot_endp): Clear out all three pointers in unwind
234 section entry.
236 2005-05-25 Jan Beulich <jbeulich@novell.com>
238 * config/tc-ia64.c (dot_radix): Rewrite.
240 2005-05-25 Jan Beulich <jbeulich@novell.com>
242 * config/tc-ia64.c (struct unw_rec_list): Remove next_slot_number
243 and next_slot_frag.
244 (alloc_record): Remove references to next_slot_number and
245 next_slot_frag.
246 (emit_one_bundle): Likewise.
248 2005-05-22 Nick Clifton <nickc@redhat.com>
250 * config/tc-v850.c (md_apply_fix3): Pass the address of the
251 message buffer when invoking the insert function.
253 2005-05-21 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
255 * config/tc-hppa.c (pa_ip): Promote architecture from PA 1.0 to 1.1
256 only if an instruction match is found.
258 2005-05-20 Bob Wilson <bob.wilson@acm.org>
260 * config/tc-xtensa.c (xg_assemble_vliw_tokens): Change subtraction
261 to addition in argument to xtensa_dwarf2_emit_insn.
263 2005-05-19 Zack Weinberg <zack@codesourcery.com>
265 * Makefile.am: Have 'all' depend on 'info'.
266 * Makefile.in: Regenerate.
268 2005-05-19 Alan Modra <amodra@bigpond.net.au>
270 * config/tc-ppc.c (ppc_force_relocation): Add BFD_RELOC_24_PLT_PCREL.
272 2005-05-19 Anton Blanchard <anton@samba.org>
274 * config/tc-ppc.c (parse_cpu): Handle "-mpower5".
275 (md_show_usage): Document it.
276 (ppc_setup_opcodes): Insert POWER5 mnemonics.
277 * doc/c-ppc.texi (PowerPC-Opts): Document "-mpower5".
279 2005-05-19 Jan Beulich <jbeulich@novell.com>
281 * config/tc-ia64.c (dot_endp): Don't use global symbol for unwind
282 relocations in unwind section.
284 2005-05-18 Nick Clifton <nickc@redhat.com>
286 * config/tc-v850.c (md_apply_fix3): Only use the insertion routine
287 if one exists. Ignore any error messages it may produce, just
288 allow it to perform the insertion.
290 2005-05-17 Zack Weinberg <zack@codesourcery.com>
292 * hash.c (hash_lookup): Add len parameter. All callers changed.
293 (hash_find_n): New interface.
294 * hash.h: Prototype hash_find_n.
295 * sb.c: Include as.h.
296 (scrub_from_sb, sb_to_scrub, scrub_position): New statics.
297 (sb_scrub_and_add_sb): New interface.
298 * sb.h: Prototype sb_scrub_and_add_sb.
299 * input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.
301 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
302 reference to BFD_RELOC_ARM_GOT12 which is never generated.
303 * config/tc-arm.c: Rewrite, adding Thumb-2 support.
305 2005-05-17 Daniel Jacobowitz <dan@codesourcery.com>
307 * doc/Makefile.am (gasver.texi): Don't use $<.
308 * doc/Makefile.in: Regenerated.
310 2005-05-17 Nick Clifton <nickc@redhat.com>
312 PR 876
313 * symbols.c (resolve_symbol_value): Do not move symbols whose
314 value expression has not been resolved or finalized into the
315 absolute section as this will confuse other parts of the assembler
316 into thinking that their value is zero.
318 2005-05-17 Jan Beulich <jbeulich@novell.com>
320 * read.c (_find_end_of_line): New.
321 (find_end_of_line): New.
322 (HANDLE_CONDITIONAL_ASSEMBLY): Use it.
323 (read_a_source_file): Use it.
324 (s_globl): Use it.
325 (s_macro): Use it.
326 (get_line_sb): Use it.
327 (s_errwarn): Replace discard_rest_of_line by ignore_rest_of_line.
328 (s_comm_internal): Likewise.
329 (s_lsym): Likewise.
330 (s_macro): Likewise.
331 (s_ignore): Use ignore_rest_of_line.
332 * read.h (find_end_of_line): Prototype.
333 (discard_rest_of_line): Remove prototype. #define to
334 ignore_rest_of_line.
336 2005-05-17 Nick Clifton <nickc@redhat.com>
338 * config/tc-v850,h (TC_FIX_TYPE): Define.
339 (TC_INIT_FIX_TYPE): Define.
340 * config/tc-v850.c (md_assemble): When creating a fix record the
341 operand in the tc_fix_data field.
342 (md_apply_fix3): When applying a resolved fix use the operand's
343 insertion procedure to store the value, if the operand has been
344 recorded.
346 2005-05-15 Daniel Jacobowitz <dan@codesourcery.com>
348 * Makefile.am (m68k-parse.c, itbl-parse.c): Update ylwrap
349 invocation.
350 * Makefile.in: Regenerated.
352 2005-05-13 Sterling Augustine <sterling@tensilica.com>
353 Bob Wilson <bob.wilson@acm.org>
355 * config/tc-xtensa.c (xtensa_insnbuf_set_operand): Clarify error
356 message.
357 (xtensa_mark_zcl_first_insns): Fix incorrect nesting of conditional
358 for handling RELAX_CHECK_ALIGN_NEXT_OPCODE.
360 2005-05-11 Alan Modra <amodra@bigpond.net.au>
362 * config/tc-ppc.c (md_apply_fix3): Allow pcrel forms of BFD_RELOC_16,
363 BFD_RELOC_LO16, BFD_RELOC_HI16 and BFD_RELOC_HI16_S.
365 2005-05-10 Michael Matz <matz@suse.de>
367 * frags.c (frag_grow): Don't be too greedy in allocating memory.
369 * config/tc-hppa.c (pa_block): Check arguments to .block[z].
371 2005-05-10 Hans-Peter Nilsson <hp@bitrange.com>
373 PR binutils/886
374 * config/tc-mmix.c (mmix_handle_mmixal): Rearrange slightly.
375 Handle label-without-colon before ordinary dot-pseudo as an
376 ordinary label. Don't leak memory for label-without-colon alone
377 on a line. Don't mmixal-munge operands for dot-pseudos.
379 2005-05-10 Jan Beulich <jbeulich@novell.com>
381 * macro.c (get_any_string): Remove the two last parameters. Replace
382 references to the former expand parameter by using macro_alternate.
383 Simplify loop condition for checking for end-of-string.
384 (get_string): Remove redunant call to sb_skip_white.
385 (do_formals): Remove two last arguments to get_any_string.
386 (macro_expand): Likewise.
387 (expand_irp): Likewise.
389 2005-05-10 Jan Beulich <jbeulich@novell.com>
391 * read.c (s_macro): Move local variable 'local' to smaller scope.
392 Call sb_kill on it when done.
394 2005-05-09 Jan Beulich <jbeulich@novell.com>
396 * config/tc-i386.c (optimize_disp): Discard displacement entirely
397 when zero and not required by encoding constraints.
399 2005-05-09 H.J. Lu <hongjiu.lu@intel.com>
401 PR 936
402 * config/tc-sh64.c (sh64_fake_label): New.
404 * config/tc-sh64.h (TC_FAKE_LABEL): New.
406 * doc/internals.texi (TC_FAKE_LABEL): Document.
408 * write.c (TC_FAKE_LABEL): New.
409 (adjust_reloc_syms): Use it.
410 (write_object_file): Likewise.
412 2005-05-09 Jan Beulich <jbeulich@novell.com>
414 * config/tc-i386.c (parse_insn): Disallow use of prefix separator
415 and comma in Intel mode.
417 2005-05-09 Jan Beulich <jbeulich@novell.com>
419 * config/tc-i386.c (tc_x86_regname_to_dw2regnum): Correct 64-bit mode
420 names to match ABI. Add more registers for 32-bit and 64-bit modes.
421 Make name array static and const. Adjust lookup to account for NULL
422 entries (standing for unused register numbers).
424 2005-05-09 Jan Beulich <jbeulich@novell.com>
426 * config/tc-i386.c (parse_insn): Consider all matching instructions
427 when checking for string instruction after string-only prefix.
429 2005-05-07 H.J. Lu <hongjiu.lu@intel.com>
431 PR 940
432 * config/tc-ia64.c (start_unwind_section): Properly check
433 comdat group with SHF_GROUP.
435 2005-05-06 Bob Wilson <bob.wilson@acm.org>
437 * doc/c-xtensa.texi (Literal Directive): Spelling correction.
439 2005-05-06 Bob Wilson <bob.wilson@acm.org>
441 * config/tc-xtensa.c: Remove excess whitespace.
442 * config/tc-xtensa.h: Likewise.
443 * config/xtensa-istack.h: Likewise.
444 * config/xtensa-relax.c: Likewise.
445 * config/xtensa-relax.h: Likewise.
447 2005-05-06 Nick Clifton <nickc@redhat.com>
449 * sb.h: Fix formatting of comments.
450 * sb.c: Fix formatting of comments.
452 2005-05-06 Jan Beulich <jbeulich@novell.com>
454 * sb.h (sb_add_buffer): Reintroduce.
455 * sb.c (sb_add_buffer): Likewise.
457 2005-05-06 Jan Beulich <jbeulich@novell.com>
459 * macro.c (new_formal, del_formal): New.
460 (do_formals): Use new_formal. Check for and parse qualifier. Warn if
461 required argument has default value. Stop looking for more formal
462 when there was a vararg one.
463 (macro_expand_body): Use new_formal and del_formal.
464 (macro_expand): Likewise. Initialize local variable err. Don't
465 return immediately when encountering an error. Warn when keyword
466 argument already had a value assigned. Eliminate duplicate clearing
467 of argument value. When current positional argument matches parameter
468 of vararg type, assign to it all the remaining arguments. Issue error
469 when required parameter does not have value.
470 (free_macro): Use del_formal.
471 (expand_irp): Initialize formal type. Free buffers associated with
472 formal prior to returning.
473 * macro.h (struct formal_struct): Add new field 'type' with new
474 enumeration type 'formal_type'.
475 * doc/as.texinfo: Document macro parameter qualifiers.
476 * NEWS: Mention new functionality.
478 2005-05-06 Jan Beulich <jbeulich@novell.com>
480 * cond.c (s_ifb): New.
481 * read.c (potable): Add s_ifb as handler for .ifb and .ifnb.
482 * read.h (s_ifb): Prototype.
483 * doc/as.texinfo: Document .ifb and .ifnb.
485 2005-05-05 Steve Ellcey <sje@cup.hp.com>
487 * config/tc-ia64.c (MIN): Undef.
489 2005-05-05 Paul Brook <paul@codesourcery.com>
491 * config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
493 2005-05-05 Matt Thomas <matt@3am-software.com>
495 * config/tc-vax.c (md_assemble): Don't assume a valueT is 4
496 bytes.
498 2005-05-05 Nick Clifton <nickc@redhat.com>
500 * Update the address and phone number of the FSF organization in
501 the GPL notices in the following files:
502 COPYING, app.c, as.c, as.h, asintl.h, atof-generic.c, bignum.h,
503 bit_fix.h, cgen.c, cgen.h, cond.c, debug.c, depend.c, dw2gencfi.c,
504 dw2gencfi.h, dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c,
505 emul-target.h, emul.h, expr.c, expr.h, flonum-copy.c,
506 flonum-konst.c, flonum.h, frags.c, frags.h, hash.c, hash.h,
507 input-file.c, input-file.h, input-scrub.c, itbl-lex.h, itbl-lex.l,
508 itbl-ops.c, itbl-ops.h, itbl-parse.y, listing.c, listing.h,
509 literal.c, macro.c, macro.h, messages.c, obj.h, output-file.c,
510 output-file.h, read.c, read.h, sb.c, sb.h, stabs.c,
511 struc-symbol.h, subsegs.c, subsegs.h, symbols.c, symbols.h, tc.h,
512 write.c, write.h, config/aout_gnu.h, config/atof-ieee.c,
513 config/atof-vax.c, config/itbl-mips.h, config/m68k-parse.h,
514 config/m68k-parse.y, config/m88k-opcode.h, config/obj-aout.c,
515 config/obj-aout.h, config/obj-bout.c, config/obj-bout.h,
516 config/obj-coff.c, config/obj-coff.h, config/obj-ecoff.c,
517 config/obj-ecoff.h, config/obj-elf.c, config/obj-elf.h,
518 config/obj-evax.c, config/obj-evax.h, config/obj-hp300.c,
519 config/obj-hp300.h, config/obj-ieee.c, config/obj-ieee.h,
520 config/obj-multi.h, config/obj-som.c, config/obj-som.h,
521 config/tc-a29k.c, config/tc-a29k.h, config/tc-alpha.c,
522 config/tc-alpha.h, config/tc-arc.c, config/tc-arc.h,
523 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
524 config/tc-cris.c, config/tc-cris.h, config/tc-crx.c,
525 config/tc-crx.h, config/tc-d10v.c, config/tc-d10v.h,
526 config/tc-d30v.c, config/tc-d30v.h, config/tc-dlx.c,
527 config/tc-dlx.h, config/tc-fr30.c, config/tc-fr30.h,
528 config/tc-frv.c, config/tc-frv.h, config/tc-generic.c,
529 config/tc-generic.h, config/tc-h8300.c, config/tc-h8300.h,
530 config/tc-h8500.c, config/tc-h8500.h, config/tc-hppa.c,
531 config/tc-hppa.h, config/tc-i370.c, config/tc-i370.h,
532 config/tc-i386.c, config/tc-i386.h, config/tc-i860.c,
533 config/tc-i860.h, config/tc-i960.c, config/tc-i960.h,
534 config/tc-ia64.c, config/tc-ia64.h, config/tc-ip2k.c,
535 config/tc-ip2k.h, config/tc-iq2000.c, config/tc-iq2000.h,
536 config/tc-m32r.c, config/tc-m32r.h, config/tc-m68851.h,
537 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
538 config/tc-m68k.h, config/tc-m88k.c, config/tc-m88k.h,
539 config/tc-maxq.c, config/tc-maxq.h, config/tc-mcore.c,
540 config/tc-mcore.h, config/tc-mips.c, config/tc-mips.h,
541 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
542 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
543 config/tc-msp430.c, config/tc-msp430.h, config/tc-ns32k.c,
544 config/tc-ns32k.h, config/tc-openrisc.c, config/tc-openrisc.h,
545 config/tc-or32.c, config/tc-or32.h, config/tc-pdp11.c,
546 config/tc-pdp11.h, config/tc-pj.c, config/tc-pj.h,
547 config/tc-ppc.c, config/tc-ppc.h, config/tc-s390.c,
548 config/tc-s390.h, config/tc-sh.c, config/tc-sh.h,
549 config/tc-sh64.c, config/tc-sh64.h, config/tc-sparc.c,
550 config/tc-sparc.h, config/tc-tahoe.c, config/tc-tahoe.h,
551 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
552 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
553 config/tc-tic80.c, config/tc-tic80.h, config/tc-v850.c,
554 config/tc-v850.h, config/tc-vax.c, config/tc-vax.h,
555 config/tc-w65.c, config/tc-w65.h, config/tc-xstormy16.c,
556 config/tc-xstormy16.h, config/tc-xtensa.c, config/tc-xtensa.h,
557 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
558 config/te-freebsd.h, config/te-hp300.h, config/te-hppa.h,
559 config/te-ic960.h, config/te-irix.h, config/te-nbsd.h,
560 config/te-netware.h, config/te-sparcaout.h, config/te-sun3.h,
561 config/te-tmips.h, config/te-vxworks.h, config/vax-inst.h,
562 config/xtensa-istack.h, config/xtensa-relax.c,
563 config/xtensa-relax.h, doc/fdl.texi
565 2005-05-05 Nick Clifton <nickc@redhat.com>
567 * config/tc-arm.c (arm_opts): Make -mlittle-endian switch set
568 the target_big_endian variable to false.
570 2005-05-04 Alan Modra <amodra@bigpond.net.au>
572 * config/obj-ecoff.c (ecoff_frob_file_before_fix): Correct section
573 list traversal. Use bfd_section_list_prepend.
574 * config/tc-mmix.c (mmix_frob_file): Don't needlessly iterate
575 over the section list.
576 * config/tc-xtensa.c (xtensa_remove_section): Delete.
577 (xtensa_insert_section): Delete.
578 (xtensa_move_seg_list_to_beginning): Use bfd_section_list_remove
579 and bfd_section_list_prepend.
580 (xtensa_reorder_seg_list): Use bfd_section_list_remove and
581 bfd_section_list_insert_after.
583 2005-05-03 Nick Clifton <nickc@redhat.com>
585 * config/obj-ecoff.c (ecoff_frob_file_before_fix): Fix invocations
586 of bfd_section_list... macros.
587 * config/tc-mmix.c (mmix_frob_file): Likewise.
588 * config/tc-xtensa.c (xtensa_remove_section): Likewise.
589 (xtensa_insert_section): Likewise.
591 * macro.c (macro_hash): Remove static.
592 * macro.h (macro_hash): Provide an external declaration.
594 2005-05-02 H.J. Lu <hongjiu.lu@intel.com>
596 * write.c (write_object_file): Use bfd_section_double_list_remove
597 to remove sections.
599 2005-05-02 Daniel Jacobowitz <dan@codesourcery.com>
601 * doc/Makefile.am (gasver.texi): Correct quoting.
602 * doc/Makefile.in: Regenerated.
604 2005-04-29 Ralf Corsepius <ralf.corsepius@rtems.org>
606 * configure.tgt: Add h8300*-*-rtemscoff.
607 Switch h8300*-*-rtems* to elf.
609 2005-04-29 H.J. Lu <hongjiu.lu@intel.com>
611 * hash.c: Undo the last change.
612 * hash.h: Likewise.
614 2005-04-29 Daniel Jacobowitz <dan@codesourcery.com>
616 * doc/Makefile.am (gasver.texi): Depend on bfd/configure instead
617 of Makefile.
618 (DISTCLEANFILES): Remove.
619 (MAINTAINERCLEANFILES): Add asconfig.texi.
620 * aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.
622 2005-04-29 Ben Elliston <bje@au.ibm.com>
624 * Makefile.am (GAS_CFILES): Remove bignum-copy.c.
625 (GENERIC_OBJS): Likewise, remove bignum-copy.o.
626 (bignum-copy.o): Remove.
627 * Makefile.in: Regenerate.
628 * makefile.vms (OBJS): Remove bignum-copy.obj.
629 * symbols.h (local_symbol_make): Remove declaration.
630 (verify_symbol_chain_2): Likewise.
631 * symbols.c (local_symbol_make): Make static.
632 (max_indent_level): Likewise.
633 (verify_symbol_chain_2): Remove.
634 * macro.c (macro_hash): Make static.
635 * messages.c (fprint_value): Remove.
636 * read.h (get_absolute_expr): Remove.
637 (emit_leb128_expr): Likewise.
638 (do_s_func): Likewise.
639 * read.c (do_s_func): Make static.
640 (emit_leb128_expr): Likewise.
641 (get_absolute_expr): Likewise.
642 * as.h (as_howmuch): Remove declaration.
643 (fprint_value): Likewise.
644 * as.c (myname): Make static.
645 * input-scrub.c (as_howmuch): Remove.
646 (as_1_char): Likewise.
647 * input-file.h (input_file_is_open): Remove.
648 * input-file.c (input_file_is_open): Likewise.
649 * expr.h (expr_build_unary): Remove declaration.
650 (expr_build_binary): Likewise.
651 * expr.c (expr_build_unary): Remove.
652 (expr_build_binary): Likewise.
653 * hash.h (hash_replace): Remove declaration.
654 (hash_delete): Likewise.
655 * hash.c (hash_replace): Remove.
656 (hash_delete): Likewise.
657 * bignum-copy.c (bignum_copy): Move from here ..
658 * config/tc-vax.c (bignum_copy): .. to here.
659 * bignum.h (LOG_TO_BASE_2_OF_10): Remove.
660 (bignum_copy): Remove extern declaration.
661 * sb.h (string_count): Remove extern declaration.
662 (sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise.
663 (sb_name): Likewise.
664 * sb.c (dsize): Replace preprocessor macro with static int.
665 (string_count): Make static.
666 (sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise.
667 (sb_name): Likewise.
668 * config/obj-coff.c (dim_index): Make static.
669 * config/tc-i386.c (GOT_symbol): Likewise.
670 (output_invalid_buf): Likewise.
671 * doc/internals.texi (Warning and error messages): Remove the
672 prototype for fprint_value.
674 2005-04-27 Ben Elliston <bje@au.ibm.com>
676 * link.cmd: Remove.
678 2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
680 * config/obj-multi.h (FAKE_LABEL_NAME): Defined.
682 * read.c (pseudo_set): Disallow symbol set to common symbol.
684 PR 857
685 * write.c (write_object_file): Report common symbol name when
686 disallowing local symbol set to common symbol.
687 (adjust_reloc_syms): Disallow local symbol set to undefined
688 symbol.
690 2005-04-25 Jan Beulich <jbeulich@novell.com>
692 * macro.c (macro_expand_body): Replace locals indicator parameters
693 with actual macro_entry. New local variables macro_line and err.
694 Don't return when encountering an error, just record the fact.
695 Detect local symbol name colliding with parameter. Track line number
696 inside of macro expansion.
697 (do_formals): Move local variable name to wider scope. Check
698 parameter of the same name doesn't already exist. In MRI mode, also
699 check it doesn't collide with the argument count pseudo-parameter).
700 (define_macro): Add file and line number parameters. Remove local
701 variable namestr. New local variable error. Initialize macro_entry
702 members file, line, and name. Don't return when encountering an
703 error, just record the fact. Use %s in some diagnostics for read.c
704 to insert the macro name. Free macro_entry on error.
705 (macro_expand): Pass macro_entry to macro_epand_body. Don't return
706 when encountering an error, just record the fact.
707 (expand_irp): Don't return when encountering an error, just record
708 the fact.
709 * macro.h (macro_struct): New members name, file, and line.
710 (define_macro): Add file and line number parameters.
711 * read.c (s_macro): Pass file and line to define_macro. Tag warning
712 regarding pseudo-op redefinition with the file/line that macro
713 definition started at.
715 2005-04-22 Bob Wilson <bob.wilson@acm.org>
717 * config/tc-xtensa.c (LOOKAHEAD_ALIGNER): Delete macro.
718 (future_alignment_required): Remove ifdefs that use it.
720 2005-04-22 Bob Wilson <bob.wilson@acm.org>
722 * config/tc-xtensa.c (xg_get_build_instr_size): Remove.
723 (xg_is_narrow_insn, xg_expand_narrow): Remove. Merge into...
724 (xg_is_single_relaxable_insn): ...here. Add "targ" and "narrow_only"
725 parameters.
726 (xg_assembly_relax, xg_find_narrowest_format, relaxation_requirements,
727 convert_frag_narrow): Use new version of xg_is_single_relaxable_insn.
729 2005-04-21 Christian Groessler <chris@groessler.org>
731 * config/tc-z8k.c (md_assemble): Fix buffer overrun in operand[]
732 array.
734 2005-04-20 H.J. Lu <hongjiu.lu@intel.com>
736 * config/obj-aout.h (S_IS_EXTERN): Removed.
737 * config/obj-bout.h (S_IS_EXTERN): Likewise.
738 * config/obj-coff.h (S_IS_EXTERN): Likewise.
739 * symbols.c (S_IS_EXTERN): Likewise.
740 * symbols.h (S_IS_EXTERN): Likewise.
742 * config/tc-alpha.c (tc_gen_reloc): Replace S_IS_EXTERN with
743 S_IS_EXTERNAL.
744 * config/tc-d10v.c (md_apply_fix3): Likewise.
745 * config/tc-ia64.c (ia64_fix_adjustable): Likewise.
746 * config/tc-iq2000.c (iq2000_fix_adjustable): Likewise.
747 * config/tc-m32r.c (m32r_fix_adjustable): Likewise.
748 * config/tc-mmix.c (mmix_adjust_symtab): Likewise.
749 * config/tc-sh64.c (shmedia_frob_file_before_adjust): Likewise.
750 (shmedia_md_convert_frag): Likewise.
751 * symbols.c (print_symbol_value_1): Likewise.
752 * write.c (write_object_file): Likewise.
754 2005-04-20 Nick Clifton <nickc@redhat.com>
756 * config/tc-xtensa.c (get_aligned_diff): Change type of
757 branch_align to offsetT so that its signedness matches that of
758 target_size.
760 * config/tc-mips.c (macro): Use sprintf_vma to convert a > 32 bit
761 number into a readable string.
762 (load_register): Likewise.
764 2005-04-20 Andreas Schwab <schwab@suse.de>
766 * config/tc-ia64.c (specify_resource): Initialize all of tmpl.
768 2005-04-19 David S. Miller <davem@davemloft.net>
770 * config/tc-sparc.c (md_assemble): If sparc_ip gives us a
771 NULL insn, exit early. Remove now spurious NULL checks.
772 (sparc_ip): Use as_bad for unknown opcode errors, set *pinsn
773 to NULL and exit.
775 2005-04-19 Jan Beulich <jbeulich@novell.com>
777 * symbols.h (symbol_find_base): Remove prototype.
778 * symbols.c (save_symbol_name): Remove code section conditional upon
779 STRIP_UNDERSCORE.
780 (symbol_find): Remove.
781 (symbol_find_base): Rename to symbol_find.
782 * subsegs.c (section_symbol): Replace use of symbol_find_base with
783 symbol_find.
784 * config/obj-coff.c (tag_insert): Remove code section conditional
785 upon STRIP_UNDERSCORE.
786 (obj_coff_def): Likewise.
787 (obj_coff_endef): Replace use of symbol_find_base with symbol_find.
788 (coff_frob_symbol): Likewise.
789 (yank_symbols): Likewise.
790 (c_section_symbol): Likewise.
791 * config/obj-coff.h (DO_NOT_STRIP): Remove.
792 * config/tc-arm.c (symbol_locate): Remove code section conditional
793 upon STRIP_UNDERSCORE.
794 * config/tc-h8300.h (DO_NOT_STRIP): Remove.
795 * config/tc-h8500.h (DO_NOT_STRIP): Remove.
796 * config/tc-sh.h (DO_NOT_STRIP): Remove.
797 * config/tc-w65.h (DO_NOT_STRIP): Remove.
798 * config/tc-z8k.h (DO_NOT_STRIP): Remove.
800 2005-04-19 Andreas Schwab <schwab@suse.de>
802 * config/tc-ia64.c (md_assemble): Fix error message for wrong
803 access to application registers.
805 2005-04-19 Jan Beulich <jbeulich@novell.com>
807 * config/te-sysv32.h: Remove.
808 * Makefile.am (TARG_ENV_HFILES): Remove reference to
809 config/te-sysv32.h.
810 * Makefile.in (TARG_ENV_HFILES): Likewise.
812 2005-04-19 Jan Beulich <jbeulich@novell.com>
814 PR/847
815 * config/tc-ia64.c (ia64_canonicalize_symbol_name): Re-allow zero-
816 length symbols.
818 2005-04-18 Mark Kettenis <kettenis@gnu.org>
820 * config/tc-i386.c (md_begin): Allow hyphens in mnemonics.
822 2005-04-18 Maciej W. Rozycki <macro@linux-mips.org>
824 * config/tc-mips.c (normalize_constant_expr): Don't check for
825 HAVE_32BIT_GPRS.
826 (check_absolute_expr): Only call normalize_constant_expr() if
827 HAVE_32BIT_GPRS.
828 (mips_ip): Likewise.
830 * config/tc-mips.c (check_absolute_expr): Fix formatting.
832 2005-04-18 Jan Beulich <jbeulich@novell.com>
834 * macro.c (free_token): New, freeing all the memory associated with a
835 macro.
836 (do_formals): Move initializers to ...
837 (define_macro): ... here.
838 (delete_macro): Convert passed in name to lower case. Warn when
839 purging macro that doesn't exist. Use hash_jam instead of hash_delete.
841 2005-04-15 Maciej W. Rozycki <macro@linux-mips.org>
843 * config/tc-mips.c (normalize_constant_expr): Fix formatting.
845 2005-04-15 Jan Beulich <jbeulich@novell.com>
847 * config/obj-elf.c (obj_elf_struct): New.
848 (elf_pseudo_table). Use it for .offset and .struct.
850 2005-04-14 Bob Wilson <bob.wilson@acm.org>
851 Sterling Augustine <sterling@tensilica.com>
853 * config/tc-xtensa.c (get_aligned_diff): Handle target_size larger
854 than the section alignment.
856 2005-04-14 Bob Wilson <bob.wilson@acm.org>
857 H.J. Lu <hongjiu.lu@intel.com>
859 * config/tc-xtensa.h (struct xtensa_frag_type): Add lit_frchain field.
860 * config/tc-xtensa.c (xg_translate_sysreg_op,
861 xtensa_translate_old_userregs_ops,
862 xtensa_find_unaligned_branch_targets,
863 xtensa_find_unaligned_loops, xtensa_fix_close_loop_end_frags,
864 relax_frag_add_nop): Support 64-bit host.
865 (xtensa_mark_literal_pool_location, xtensa_move_literals): Use
866 tc_frag_data lit_frchain and lit_seg fields instead of fr_var.
868 2005-04-14 Mark Kettenis <kettenis@gnu.org>
870 * configure.tgt: Add support for OpenBSD/sparc ELF.
872 * configure.tgt: Set emulation for mips-*-openbsd*.
873 Remove broken mips-dec-openbsd* config.
874 * configure.in: Set default ABI for mips64-*-openbsd*.
875 * configure: Regenerate.
877 2005-04-14 Maciej W. Rozycki <macro@linux-mips.org>
879 * config/tc-mips.c (macro) [ldd_std]: Don't attempt the GP
880 optimization for constant addresses.
882 2005-04-14 Nick Clifton <nickc@redhat.com>
884 * as.c (main): Move parse_args before symbol_begin and frag_init
885 so that the hash table size can be set before it is used.
886 * hash.c: Use an unsigned long type for the size of the hash
887 tables.
888 * hash.h (set_gas_hash_table_size): Update the prototype.
890 2005-04-14 Alan Modra <amodra@bigpond.net.au>
892 * Makefile.am (NO_WERROR): Define. Use instead of -Wno-error.
893 * acinclude.m4: Include ../bfd/warning.m4.
894 * configure.in: Invoke AM_BINUTILS_WARNINGS.
895 * Makefile.in: Regenerate.
896 * configure: Regenerate.
897 * doc/Makefile.in: Regenerate.
899 2005-04-13 Maciej W. Rozycki <macro@linux-mips.org>
901 * config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
902 (normalize_address_expr): New function to sign-extend address
903 offsets that fit into 32 bits in 32-bit mode.
904 (macro_build_ldst_constoffset): Use normalize_address_expr()
905 instead of a handcoded sequence.
906 (load_register): Likewise. Report oversized numbers in a useful
907 way.
908 (macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
909 for constant addresses. Report oversized numbers in a useful way.
910 (mips_ip): Use normalize_address_expr() for addresses.
912 2005-04-12 Mark Kettenis <kettenis@gnu.org>
914 * config/tc-i386.c (output_insn): Handle VIA PadLock instructions
915 similar to other instructions now that they're marked as ImmExt.
917 2005-04-12 Nick Clifton <nickc@redhat.com>
919 * hash.c (DEFAULT_SIZE): Delete. Replace with:
920 (gas_hash_table_size): New static variable.
921 (set_gas_hash_table_size): New function: Records a requested size
922 for the hash tables.
923 (get_gas_hash_table_size): New function: Return a prime number
924 near the requested size of the hash table.
925 (hash_new): Use get_gas_hash_table_size.
926 * hash.h: Add a prototype for set_gas_hash_table_size.
927 * as.c (show_usage): Add description of new switches: --hash-size
928 and --reduce-memory-overheads.
929 (option_values): Add OPTION_HASH_TABLE_SIZE and
930 OPTION_REDUCE_MEMORY_OVERHEADS.
931 (std_longpopts): Add entries for the new options.
932 (parse_args): Handle the new options.
933 * Makefile.am: Add a dependency of as.c on hash.h.
934 * Makefile.in: Regenerate.
935 * doc/as.texinfo: Document the new switches.
936 * NEWS: Mention the new switches.
938 2005-04-12 Nick Clifton <nickc@redhat.com>
940 PR gas/818
941 * config/tc-hppa.c (pre_defined_registers): Fix %farg[0-3]
942 synonyms.
944 2005-04-12 Alan Modra <amodra@bigpond.net.au>
946 * Makefile.am: Run "make dep-am".
947 * Makefile.in: Regenerate.
949 2005-04-11 Sterling Augustine <sterling@tensilica.com>
950 Bob Wilson <bob.wilson@acm.org>
952 * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Fix typo.
954 2005-04-11 Mark Kettenis <kettenis@gnu.org>
956 * configure.tgt (generic_target): Add support for OpenBSD/i386 ELF.
958 2005-04-11 Jan Beulich <jbeulich@novell.com>
960 * NEWS: Mention these changes and their effects.
961 * macro.c (get_token): Use is_name_beginner/is_part_of_name/
962 is_name_ender.
963 (check_macro): Likewise.
964 (buffer_and_nest): Likewise. Permit multiple labels. Don't discard
965 labels together with the closing pseudo-op.
966 (macro_expand_body): Adjust comment. Range-check input before use.
967 Adjust mis-spelled diagnostic. Use is_name_beginner.
968 * read.c (try_macro): New.
969 (read_a_source_file): New static variable last_eol. Don't list
970 macro expansion lines more than once. Call try_macro.
971 (s_macro): Set section of line_label to absolute instead of undefined.
972 * doc/as.texinfo: Add information on the caveats of these changes.
974 2005-04-11 Alan Modra <amodra@bigpond.net.au>
976 * symbols.c (symbol_X_add_number): Change return type to "offsetT *".
977 * symbols.h (symbol_X_add_number): Update prototype.
979 2005-04-10 Eric Christopher <echristo@redhat.com>
981 * symbols.c (symbol_X_add_number): Fix warning.
983 2005-04-10 H.J. Lu <hongjiu.lu@intel.com>
985 * config/tc-m68k.c (md_begin): Support 64bit host.
986 (get_num): Support 64bit BFD on 32bit host.
988 2005-04-10 H.J. Lu <hongjiu.lu@intel.com>
990 * config/tc-mips.c (md_apply_fix3): Fix typos in BFD_RELOC_64.
992 2005-04-09 Alan Modra <amodra@bigpond.net.au>
994 * read.c (assign_symbol): Remove const from parm. Fix xcalloc
995 call. Don't do the COFF hacks for multi-emulation gas. Move
996 demand_empty_rest_of_line back to caller.
997 (s_set, equals): demand_empty_rest_of_line here.
999 PR gas/827
1000 * as.h (rs_dummy): Define.
1001 * symbols.c (symbol_X_add_number): New function.
1002 * symbols.h (symbol_X_add_number): Declare.
1003 * stabs.c (aout_process_stab): Tidy symbol frag setting.
1004 * read.c (assign_symbol): New function, split out from s_set.
1005 Use symbol_find_or_make. Leave fr_type of dummy frag as rs_dummy.
1006 Fix COFF hacks for multi-emulation gas.
1007 (s_set): Call assign_symbol. Remove "register" keyword.
1008 (set_zero_frag): New function.
1009 (pseudo_set): Always check for assignment to section syms.
1010 Always set segment and frag of symbol, and likewise extern for
1011 aout/bout. Handle assignment of sym=sym+/-const specially. Don't
1012 special case exp.X_add_number non-zero for O_symbol expressions.
1013 (equals): Use assign_symbol.
1015 2005-04-08 Bob Wilson <bob.wilson@acm.org>
1017 * config/tc-xtensa.c (xtensa_create_xproperty_segments): Skip
1018 SEC_MERGE sections.
1020 2005-04-06 H.J. Lu <hongjiu.lu@intel.com>
1022 * config/tc-i386.c (tc_gen_reloc): Don't turn
1023 BFD_RELOC_X86_64_32S into BFD_RELOC_32.
1025 2005-04-06 Nick Clifton <nickc@redhat.com>
1027 * po/rw.po: New translation: Kinyarwanda
1028 * configure.in (ALL_LINGUAS): Add rw
1029 * configure: Regenerate.
1031 2005-04-05 Sterling Augustine <sterling@tensilica.com>
1032 Bob Wilson <bob.wilson@acm.org>
1034 * config/tc-xtensa.c (branch_align_power): New.
1035 (xtensa_find_unaligned_branch_targets, get_aligned_diff,
1036 future_alignment_required): Use branch_align_power to check section
1037 alignment as well as xtensa_fetch_width when aligning branch targets.
1039 2005-04-05 Bob Wilson <bob.wilson@acm.org>
1041 * config/tc-xtensa.c: Warning fixes throughout.
1042 (xtensa_fetch_width): Change to unsigned.
1043 (assemble_nop, xtensa_find_unaligned_branch_targets,
1044 xtensa_find_unaligned_loops, xg_assemble_vliw_tokens,
1045 is_narrow_branch_guaranteed_in_range, xtensa_fix_close_loop_end_frags,
1046 min_bytes_to_other_loop_end, unrelaxed_frag_min_size,
1047 unrelaxed_frag_max_size, xtensa_fix_short_loop_frags,
1048 count_insns_to_loop_end, unrelaxed_frag_min_insn_count,
1049 get_text_align_max_fill_size, get_text_align_nop_count,
1050 get_text_align_nth_nop_size, get_noop_aligned_address,
1051 get_aligned_diff, convert_frag_align_next_opcode,
1052 convert_frag_immed_finish_loop, xtensa_create_property_segments,
1053 xtensa_create_xproperty_segments, xt_block_aligned_size): Clean up
1054 types, avoiding size_t and using offsetT and addressT appropriately.
1055 (get_text_align_power): Clean up types. Avoid incorrect bound.
1056 (get_text_align_fill_size): Clean up types. Restructure for clarity.
1058 2005-04-04 H.J. Lu <hongjiu.lu@intel.com>
1060 * config/tc-ia64.c (start_unwind_section): Undo the change
1061 of 2004-08-18.
1062 (generate_unwind_image, dot_endp): Likewise.
1064 2005-04-01 David Mosberger <davidm@hpl.hp.com>
1066 * config/tc-ia64.c (ia64_handle_align): Move le_nop and
1067 le_nop_stop arrays and initializers to file scope.
1068 (md_begin): When generating code for anything other than
1069 Itanium 1, use MMI instead of MFI NOP bundles as a filler.
1071 2005-04-01 Jan Beulich <jbeulich@novell.com>
1073 * config/tc-i386.c (output_imm): Also set sign flag for 64-bit push
1074 immediates.
1076 2005-04-01 Jan-Benedict Glaw <jbglaw@lug-owl.de>
1078 * NEWS: Mention [fdgh]_floating.
1079 * config/atof-vax.c: Fix some whitespace.
1080 * config/tc-vax.c (md_pseudo_table): Add "[fdgh]_floating".
1082 2005-04-01 Nick Clifton <nickc@redhat.com>
1084 * configure.in: Add a check for <unistd.h> providing a prototype
1085 for getopt() which is compatible with the one in
1086 include/getopt.h. If so then define HAVE_DECL_GETOPT.
1087 * configure: Regenerate.
1088 * config.in (HAVE_DECL_GETOPT): Add.
1090 2005-04-01 Jan Beulich <jbeulich@novell.com>
1092 * config/tc-i386.c (s_bss): Call obj_elf_section_change_hook.
1094 2005-04-01 Jan Beulich <jbeulich@novell.com>
1096 * config/tc-i386.c (md_apply_fix3): Also handle BFD_RELOC_X86_64_32S.
1097 (tc_gen_reloc): Handle BFD_RELOC_X86_64_32S in the default case.
1099 2005-03-30 Julian Brown <julian@codesourcery.com>
1101 * config/tc-arm.c (arm_adjust_symtab): Rename
1102 bfd_elf32_is_arm_mapping_symbol_name to bfd_is_arm_mapping_symbol_name.
1104 2005-03-30 Julian Brown <julian@codesourcery.com>
1106 * config/tc-arm.c (mapping_state): Change documentation in function
1107 comment to cross-reference spec instead. Change type of mapping symbols
1108 to BSF_NO_TYPE.
1109 (arm_adjust_symtab): Don't change type of mapping symbols here.
1111 2005-03-30 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1113 * as.h [NEED_DECLARATION_FFS] (ffs): Prototype and alphabetize.
1114 * config.in: Regenerate.
1115 * configure: Regenerate.
1116 * configure.in: Check for ffs decl and alphabetize.
1118 2005-03-29 Daniel Jacobowitz <dan@codesourcery.com>
1119 Phil Blundell <philb@gnu.org>
1121 * config/tc-arm.c (arm_parse_reloc): Add TLS relocations.
1122 (md_apply_fix3): Mark TLS symbols.
1123 (tc_gen_reloc): Handle TLS relocations.
1124 (arm_fix_adjustable): Ignore TLS relocations.
1125 (s_arm_elf_cons): Support expressions after decorated symbols.
1127 2005-03-29 Julian Brown <julian@codesourcery.com>
1129 * config/tc-arm.c (marked_pr_dependency): New bitmap, bit N indicates
1130 whether personality routine index N has been output for this section.
1131 (mapping_state): tc_segment_info_data now struct not enum.
1132 (arm_elf_change_section): Likewise, and marked_pr_dependency is now
1133 handled on section change.
1134 (create_unwind_entry): Previous code to output dependency removed.
1135 (s_arm_unwind_fnend): Output dependency if it hasn't been done already
1136 for this section.
1137 * config/tc-arm.h (TC_SEGMENT_INFO_TYPE): Redefined as struct
1138 arm_segment_info_type.
1139 (arm_segment_info_type): New struct.
1141 2005-03-28 Sterling Augustine <sterling@tensilica.com>
1142 Bob Wilson <bob.wilson@acm.org>
1144 * config/tc-xtensa.c (do_align_targets): Update comment.
1145 (xtensa_frob_label): Compute "freq" before possibly switching frags.
1146 Insert a LOOP_END frag before every loop target, and do not overload
1147 DESIRE_ALIGN_IF_TARGET frags with loop end information.
1148 (xg_assemble_vliw_tokens): Use do_align_targets.
1149 (xtensa_fix_target_frags): Remove code to convert a
1150 DESIRE_ALIGN_IF_TARGET frag to a LOOP_END frag when there is a
1151 negatable branch at the end of a loop.
1152 (frag_can_negate_branch): Delete.
1154 2005-03-28 David Mosberger <davidm@hpl.hp.com>
1155 H.J. Lu <hongjiu.lu@intel.com>
1157 PR 803
1158 NEWS: Mention "-mtune=[itanium1|itanium2]".
1160 * config/tc-ia64.c (md): Add tune.
1161 (md_parse_option): Accepted "-mtune=[itanium1|itanium2]".
1162 (md_show_usage): Add "-mtune=[itanium1|itanium2]".
1163 (extra_goodness): Prefer M- and I-unit NOPs for itanium2. F and
1164 B unit NOPs are discouraged for McKinley-derived cores.
1165 (md_begin): Don't hardcode the "extra_goodness()" function in
1166 the comment...
1167 (ia64_init): Set md.tune to itanium2.
1169 * doc/as.texinfo: Add -mtune=[itanium1|itanium2]".
1170 * doc/c-ia64.texi: Likewise.
1172 2005-03-27 Ian Lance Taylor <ian@airs.com>
1174 * config/obj-coff.c (coff_frob_symbol): When crashing because of a
1175 bad C_EFCN symbol, print its name.
1177 2005-03-25 Bob Wilson <bob.wilson@acm.org>
1179 * config/tc-xtensa.c (use_longcalls): Delete.
1180 (xg_symbolic_immeds_fit): Check for direct calls and return TRUE if
1181 the use_longcalls flag is set. Do this before checking the segment.
1182 (xg_expand_assembly_insn): Rearrange to use new do_expand flag. Never
1183 expand direct calls at this point.
1184 (xtensa_set_frag_assembly_state): Set use_longcalls flag.
1185 (xtensa_find_unmarked_state_frags): Likewise.
1186 (md_assemble): Do not disable longcalls by setting is_specific_opcode.
1187 (xg_assemble_vliw_tokens): Switch frags when use_longcalls changes.
1188 (convert_frag_immed): Remove unnecessary check of is_specific_opcode.
1189 * config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag.
1191 2005-03-25 Hans-Peter Nilsson <hp@bitrange.com>
1193 * config/tc-mmix.c, config/tc-mmix.h: Convert to ISO C90.
1195 2005-03-25 Hans-Peter Nilsson <hp@axis.com>
1197 * config/tc-cris.h: Convert to ISO C90.
1198 * config/tc-cris.c: Ditto.
1199 (md_estimate_size_before_relax): Remove obsolete comment for
1200 parameter "segment_type".
1201 (md_begin): Document reason for cast of hash_insert argument.
1202 (md_atof): Correct type of parameter "type".
1204 2005-03-24 Nick Clifton <nickc@redhat.com>
1206 * write.h (bit_fix_new): Remove redundant prototype.
1207 * config/atof-ieee.c: Convert to ISO-C90 and fix formatting.
1208 * config/obj-aout.c: Convert to ISO-C90 and fix formatting.
1209 * config/obj-aout.h: Convert to ISO-C90 and fix formatting.
1210 * config/obj-bout.c: Convert to ISO-C90 and fix formatting.
1211 * config/obj-bout.h: Convert to ISO-C90 and fix formatting.
1212 * config/obj-ecoff.c: Convert to ISO-C90 and fix formatting.
1213 * config/obj-ecoff.h: Convert to ISO-C90 and fix formatting.
1214 * config/obj-som.c: Convert to ISO-C90 and fix formatting.
1215 * config/obj-som.h: Convert to ISO-C90 and fix formatting.
1216 * config/tc-a29k.c: Convert to ISO-C90 and fix formatting.
1217 * config/tc-a29k.h: Convert to ISO-C90 and fix formatting.
1218 * config/tc-alpha.c: Convert to ISO-C90 and fix formatting.
1219 * config/tc-alpha.h: Convert to ISO-C90 and fix formatting.
1220 * config/tc-arc.c: Convert to ISO-C90 and fix formatting.
1221 * config/tc-arc.h: Convert to ISO-C90 and fix formatting.
1222 * config/tc-d10v.c: Convert to ISO-C90 and fix formatting.
1223 * config/tc-d10v.h: Convert to ISO-C90 and fix formatting.
1224 * config/tc-d30v.c: Convert to ISO-C90 and fix formatting.
1225 * config/tc-d30v.h: Convert to ISO-C90 and fix formatting.
1226 * config/tc-dlx.c: Convert to ISO-C90 and fix formatting.
1227 * config/tc-dlx.h: Convert to ISO-C90 and fix formatting.
1228 * config/tc-fr30.c: Convert to ISO-C90 and fix formatting.
1229 * config/tc-fr30.h: Convert to ISO-C90 and fix formatting.
1230 * config/tc-h8500.c: Convert to ISO-C90 and fix formatting.
1231 * config/tc-h8500.h: Convert to ISO-C90 and fix formatting.
1232 * config/tc-i370.c: Convert to ISO-C90 and fix formatting.
1233 * config/tc-i370.h: Convert to ISO-C90 and fix formatting.
1234 * config/tc-i960.c: Convert to ISO-C90 and fix formatting.
1235 * config/tc-ip2k.c: Convert to ISO-C90 and fix formatting.
1236 * config/tc-ip2k.h: Convert to ISO-C90 and fix formatting.
1237 * config/tc-m32r.c: Convert to ISO-C90 and fix formatting.
1238 * config/tc-m32r.h: Convert to ISO-C90 and fix formatting.
1239 * config/tc-m88k.c: Convert to ISO-C90 and fix formatting.
1240 * config/tc-m88k.h: Convert to ISO-C90 and fix formatting.
1241 * config/tc-mcore.c: Convert to ISO-C90 and fix formatting.
1242 * config/tc-mcore.h: Convert to ISO-C90 and fix formatting.
1243 * config/tc-mn10200.c: Convert to ISO-C90 and fix formatting.
1244 * config/tc-ns32k.c: Convert to ISO-C90 and fix formatting.
1245 * config/tc-ns32k.h: Convert to ISO-C90 and fix formatting.
1246 * config/tc-openrisc.c: Convert to ISO-C90 and fix formatting.
1247 * config/tc-openrisc.h: Convert to ISO-C90 and fix formatting.
1248 * config/tc-or32.c: Convert to ISO-C90 and fix formatting.
1249 * config/tc-or32.h: Convert to ISO-C90 and fix formatting.
1250 * config/tc-pdp11.h: Convert to ISO-C90 and fix formatting.
1251 * config/tc-pj.c: Convert to ISO-C90 and fix formatting.
1252 * config/tc-pj.h: Convert to ISO-C90 and fix formatting.
1253 * config/tc-tahoe.c: Convert to ISO-C90 and fix formatting.
1254 * config/tc-tic80.c: Convert to ISO-C90 and fix formatting.
1255 * config/tc-tic80.h: Convert to ISO-C90 and fix formatting.
1256 * config/tc-v850.c: Convert to ISO-C90 and fix formatting.
1257 * config/tc-v850.h: Convert to ISO-C90 and fix formatting.
1258 * config/tc-w65.c: Convert to ISO-C90 and fix formatting.
1259 * config/tc-w65.h: Convert to ISO-C90 and fix formatting.
1260 * config/tc-xstormy16.c: Convert to ISO-C90 and fix formatting.
1261 * config/tc-xstormy16.h: Convert to ISO-C90 and fix formatting.
1263 2005-03-23 Jim Blandy <jimb@redhat.com>
1265 * config/tc-arm.c (arm_adjust_symtab): Fetch elf_sym's binding
1266 attributes properly.
1268 2005-03-23 Mike Frysinger <vapier@gentoo.org>
1269 Nick Clifton <nickc@redhat.com>
1271 * configure.tgt: Accept any C library to accompany a GNU Linux
1272 implementation, not just the GNU C library.
1273 * configure.in: Likewise.
1274 * configure: Regenerate.
1276 2005-03-23 Nick Clifton <nickc@redhat.com>
1278 * config/tc-tic30.c: Convert to ISO C90 formatting.
1279 * config/tc-tic30.h: Convert to ISO C90 formatting.
1280 * config/tc-pdp11.c: Convert to ISO C90 formatting.
1281 * config/atof-vax.c: Convert to ISO C90 formatting.
1283 2005-03-21 Maciej W. Rozycki <macro@mips.com>
1285 * config/tc-mips.c (mips_frob_file): Sort BFD_RELOC_MIPS16_LO16
1286 relocations correctly as well.
1287 (mips_fix_adjustable): Don't make BFD_RELOC_MIPS16_LO16
1288 relocations in mergeable sections section-relative either.
1290 2005-03-21 Bob Wilson <bob.wilson@acm.org>
1292 * config/tc-xtensa.c (md_apply_fix3): Recognize XTENSA_PLT relocations.
1294 2005-03-21 Nick Clifton <nickc@redhat.com>
1296 * config/tc-sh.c (sh_elf_final_processing): Fix compile time
1297 warning by providing a prototype for sh_symbian_find_elf_flags.
1299 * cgen.c (gas_cgen_parse_operand): Fix typo introduced by
1300 previous delta.
1302 2005-03-21 Alan Modra <amodra@bigpond.net.au>
1304 * configure.tgt: Handle setting of bfd_gas for fmt=multi targets
1305 along with other formats that set bfd_gas. Remove unnecessary
1306 setting of bfd_gas. Delete strongarm cases in generic_target
1307 switch.
1309 2005-03-21 Alan Modra <amodra@bigpond.net.au>
1311 PR gas/780
1312 * config/tc-m68k.c (TRUNC, SEXT): Define.
1313 (issbyte, isubyte, issword, isuword, isbyte, isword): Use the above.
1314 (m68k_ip): Truncate or sign extend expressions as appropriate.
1315 (get_num): Likewise.
1316 (md_apply_fix3): Use SEXT.
1318 2005-03-21 Alan Modra <amodra@bigpond.net.au>
1320 * Makefile.am (OBJ_FORMAT_CFILES): Prune config/obj-vms.c.
1321 (OBJ_FORMAT_HFILES): Prune config/obj-vms.h.
1322 (obj-vms.o): Delete rule.
1323 Run "make dep-am".
1324 * Makefile.in: Regenerate.
1325 * aclocal.m4: Regenerate.
1326 * doc/Makefile.in: Regenerate.
1327 * po/POTFILES.in: Regenerate.
1329 2005-03-18 C Jaiprakash <cjaiprakash@noida.hcltech.com>
1331 * config/tc-m68k.c (m68k_elf_final_processing): Set file specific
1332 flag for coldfire v4e.
1334 2005-03-17 Bob Wilson <bob.wilson@acm.org>
1336 * config/tc-xtensa.c (xg_apply_tentative_value): Rename to
1337 xg_apply_fix_value and return a value to indicate success.
1338 (md_pcrel_from): Skip check of fx_done. Return 0 if not PC-relative.
1339 (xtensa_force_relocation): Remove checks for VTABLE relocs.
1340 (xtensa_validate_fix_sub): New.
1341 (xtensa_fix_adjustable): Remove check for external or weak symbols.
1342 (tc_gen_reloc): Move code to handle difference of symbols and code to
1343 apply tentative fix values to ...
1344 (md_apply_fix3): ...here. Enable standard overflow checks for simple
1345 8, 16, and 32 bit relocations. Apply fixes for slot-specific
1346 relocations when linkrelax flag is not set.
1347 * config/tc-xtensa.h (xtensa_validate_fix_sub): Add prototype.
1348 (TC_FORCE_RELOCATION_SUB_SAME, TC_VALIDATE_FIX_SUB): Define.
1350 2005-03-17 Jan Beulich <jbeulich@novell.com>
1352 * config/tc-i386.c (i386_scale): Beautify error message.
1353 (Intel syntax comments): Update.
1354 (struct intel_parser_s): Add fields in_offset, in_bracket, and
1355 next_operand.
1356 (intel_e04_1, intel_e05_1, intel_e05_1, intel_e09_1, intel_e10_1):
1357 Remove declarations.
1358 (intel_bracket_expr): Declare.
1359 (i386_intel_operand): Initialize new intel_parser fields. Wrap most
1360 of the function body in a loop allowing to split an operand into two.
1361 Replace calls to malloc and checks of it returning non-NULL with
1362 calls to xmalloc/xstrdup.
1363 (intel_expr): SHORT no longer handled here. Add comment indicating
1364 comparison ops need implementation.
1365 (intel_e04, intel_e04_1): Combine, replace recursion with loop.
1366 Check right operand of - does not specify a register when parsing
1367 the address of a memory reference.
1368 (intel_e05, intel_e05_1): Combine, replace recursion with loop.
1369 Check operands do not specify a register when parsing the address of
1370 a memory reference.
1371 (intel_e06, intel_e06_1): Likewise.
1372 (intel_e09, intel_e09_1): Combine, replace recursion with loop. Also
1373 handle SHORT as well as unary + and -. Don't accept : except for
1374 segment overrides or in direct far jump/call insns.
1375 (intel_brack_expr): New.
1376 (intel_e10, intel_e10_1): Combine, replace recursion with loop. Use
1377 intel_brack_expr.
1378 (intel_e11): Replace chain of if/else-if by switch, alloing fall-
1379 through in certain cases. Use intel_brack_expr. Add new diagnostics.
1380 Allow symbolic constants as register scale value.
1381 (intel_get_token): Replace call to malloc and check of return value
1382 with call to xmalloc. Change handling for FLAT to match MASM's.
1383 (intel_putback_token): Don't try to back up/free current token if
1384 that is T_NIL.
1386 2005-03-16 Daniel Jacobowitz <dan@codesourcery.com>
1388 * configure.tgt: Set emulation for arm-*-eabi*.
1389 * config/tc-arm.c (meabi_flags): Check EABI_DEFAULT.
1390 * config/te-armeabi.h: New file.
1391 * config/te-armlinuxeabi.h (EABI_DEFAULT): Define.
1392 * config/te-symbian.h: Include "te-armeabi.h".
1394 2005-03-16 Nick Clifton <nickc@redhat.com>
1396 * cgen.c (gas_cgen_parse_operand): Copy opinfo parameter into a
1397 local variable in case it is clobbered by the setjmp.
1399 2005-03-16 Nick Clifton <nickc@redhat.com>
1400 Ben Elliston <bje@au.ibm.com>
1402 * configure.in (werror): New switch: Add -Werror to the
1403 compiler command line. Enabled by default. Disable via
1404 --disable-werror.
1405 * configure: Regenerate.
1407 2005-03-16 Nick Clifton <nickc@redhat.com>
1409 * config/obj-coff.h: Convert to ISO C90 formatting.
1410 * config/obj-coff.c: Convert to ISO C90 formatting.
1412 2005-03-15 Zack Weinberg <zack@codesourcery.com>
1414 * config/tc-arm.c (do_mla): Rename to do_mlas, take second
1415 is_mls parameter; do not diagnose Rm==Rd when is_mls.
1416 (do_mla, do_mls, five_bit_unsigned_immediate, bfci_lsb_and_width)
1417 (do_bfc, do_bfi, do_bfx, do_rbit, do_mov16, do_ldsttv4): New functions.
1418 (insns): Add ARMv6T2 instructions:
1419 bfc bfi mls movw movt rbit sbfx ubfx ldrht ldrsht ldrsbt strht.
1420 (arm_archs): Add V6T2 variants.
1422 2005-03-15 Nick Clifton <nickc@redhat.com>
1424 * NEWS: Add cutoff for changes in 2.16 release.
1426 2005-03-15 Jan Beulich <jbeulich@novell.com>
1428 * expr.c (operand): Merge handling of unary + into that for unary
1429 -, !, and ~.
1431 2005-03-14 Eric Christopher <echristo@redhat.com>
1433 * config/tc-mips.c: Include dw2gencfi.h.
1434 (mips_cfi_frame_initial_instructions): New.
1435 * config/tc-mips.h (TARGET_USE_CFIPOP): Define.
1436 (tc_cfi_frame_initial_instructions): Ditto.
1437 (DWARF2_DEFAULT_RETURN_COLUMN): Ditto.
1438 (DWARF2_CIE_DATA_ALIGNMENT): Ditto.
1439 * Makefile.am: Update dependencies.
1440 * Makefile.in: Regenerate.
1442 2005-03-15 Alan Modra <amodra@bigpond.net.au>
1444 * po/es.po: Commit new Spanish translation.
1446 2005-03-14 Alan Modra <amodra@bigpond.net.au>
1448 * po/tr.po: Commit new Turkish translation.
1450 2005-03-12 Zack Weinberg <zack@codesourcery.com>
1452 * config/tc-arm.c (tinsns): Add ARMv6K instructions sev, wfe,
1453 wfi, yield.
1455 2005-03-11 Daniel Jacobowitz <dan@codesourcery.com>
1457 * config-gas.com: Mark vax-vms as obsolete.
1458 * configure.in: Remove fmt=vms support.
1459 * config.in: Regenerate.
1460 * configure: Regenerate.
1461 * config/obj-vms.h, config/obj-vms.c, config/vms-conf.h: Remove.
1463 2005-03-10 Sterling Augustine <sterling@tensilica.com>
1464 Bob Wilson <bob.wilson@acm.org>
1466 * config/tc-xtensa.c (finish_vinsn): Include the last instruction slot
1467 when checking if xg_resolve_literals needs to be called.
1468 * config/tc-xtensa.h: Fix spelling typo in a comment.
1470 2005-03-10 Jan Beulich <jbeulich@novell.com>
1472 * config/tc-tic54x.h (tic54x_macro_info): Change parameter type.
1473 * config/tc-tic54x.c (tic54x_macro_info): Likewise. Replace hand-
1474 crafted structure declarations with the types from macro.h.
1476 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1478 * config/tc-mips.c (s_cpsetup): Use '__gnu_local_gp' instead of '_gp'
1479 for -mno-shared optimization.
1481 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1483 * config/tc-mips.c (MAX_VR4130_NOPS, MAX_DELAY_NOPS): New macros.
1484 (MAX_NOPS): Bump to 4.
1485 (mips_fix_vr4130): New variable.
1486 (nops_for_vr4130): New function.
1487 (nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS. Use
1488 nops_for_vr4130 if working around VR4130 errata.
1489 (OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
1490 (md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
1491 (md_parse_option): Handle them.
1492 (md_show_usage): Print them.
1493 * doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.
1495 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1497 * config/tc-mips.c (append_insn): Remove cop_interlocks test from
1498 branch delay code.
1500 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1502 * config/tc-mips.h (mips_flush_pending_output): Delete.
1503 (mips_emit_delays): Declare.
1504 (md_flush_pending_output): Use mips_emit_delays.
1505 * config/tc-mips.c (mips_no_prev_insn): Remove parameter; always forget
1506 the previous instructions.
1507 (md_begin, append_insn, md_parse_option): Update callers.
1508 (mips_emit_delay): Remove parameter. Move INSNS != 0 code to
1509 start_noreorder.
1510 (mips_align, s_change_sec, s_cons, s_float_cons, s_gpword)
1511 (s_gpdword): Update callers.
1512 (start_noreorder, end_noreorder): New functions.
1513 (macro, macro2, mips16_macro, s_mipsset): Use them instead of
1514 manipulating mips_opts or prev_nop_frag directly.
1515 (mips_flush_pending_output): Delete.
1517 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1519 * config/tc-mips.c (mips_move_labels): New function, taken from...
1520 (append_insn, mips_emit_delays): ...here.
1522 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1524 * config/tc-mips.c (MAX_NOPS): New macro.
1525 (history): Resize to 1 + MAX_NOPS.
1526 (fix_vr4120_class): New enumeration.
1527 (vr4120_conflicts): New variable.
1528 (init_vr4120_conflicts): New function.
1529 (md_begin): Call it.
1530 (insn_uses_reg): Constify first argument.
1531 (classify_vr4120_insn, insns_between, nops_for_insn, nops_for_sequence)
1532 (nops_for_insn_or_target): New functions.
1533 (append_insn): Use the new nops_for_* functions instead of inline
1534 delay checks. Generalize prev_nop_frag handling to handle an
1535 arbitrary history length. Insert nops into the history buffer
1536 once the number of nops in prev_nop_frag is fixed.
1537 (emit_delays): Use nops_for_insn instead of inline delay checks.
1539 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1541 * config/tc-mips.c (append_insn): Remove now-redundant nops != 0
1542 check from branch delay code. Remove unnecessary check for branches.
1544 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1546 * config/tc-mips.c (dummy_opcode): Delete.
1547 (nop_insn, mips16_nop_insn): New variables.
1548 (NOP_INSN): New macro.
1549 (insn_length, create_insn, install_insn, move_insn, add_fixed_insn)
1550 (add_relaxed_insn, insert_into_history, emit_nop): New functions.
1551 (md_begin): Initialize nop_insn and mips16_nop_insn.
1552 (append_insn): Use the new emit_nop function to add nops, recording
1553 them in the history buffer. Use add_fixed_insn or add_relaxed_insn
1554 to reserve room for the instruction and install_insn to install the
1555 final form. Use insert_into_history to record the instruction in
1556 the history buffer. Use move_insn to do delay slot filling.
1557 (mips_emit_delays): Use add_fixed_insn instead of the emit_nop macro.
1558 (macro_build, mips16_macro_build, macro_build_lui, mips_ip)
1559 (mips16_ip): Use create_insn to initialize mips_cl_insns.
1561 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1563 * config/tc-mips.c (INSERT_BITS, EXTRACT_BITS, INSERT_OPERAND)
1564 (EXTRACT_OPERAND, MIPS16_INSERT_OPERAND, MIPS16_EXTRACT_OPERAND): New.
1565 (insn_uses_reg, reg_needs_delay, append_insn, macro_build)
1566 (mips16_macro_build, macro_build_lui, mips16_macro, mips_ip)
1567 (mips16_ip): Use the new macros instead of explicit masks and shifts.
1569 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1571 * config/tc-mips.c (mips_cl_insn): Replace the valid_p, delay_slot_p
1572 and extended_p fields with a single fixed_p field.
1573 (append_insn, mips_no_prev_insn): Adjust accordingly.
1575 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1577 * config/tc-mips.c (mips_cl_insn): Replace reloc_type array with
1578 a single mips16_absolute_jump_p bit.
1579 (append_insn): Adjust accordingly.
1581 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
1583 * config/tc-mips.h (mips_cl_insn): Move definition to...
1584 * config/tc-mips.c (mips_cl_insn): ...here. Add new fields:
1585 frag, where, fixp, reloc_type, valid_p, noreorder_p, delay_slot_p
1586 and extended_p.
1587 (history): New variable.
1588 (prev_insn, prev_prev_insn, prev_insn_valid, prev_insn_frag)
1589 (prev_insn_where, prev_insn_reloc_type, prev_insn_fixp)
1590 (prev_insn_is_delay_slot, prev_insn_unreordered, prev_insn_extended)
1591 (prev_prev_insn_unreordered): Delete.
1592 (reg_needs_delay, append_insn, mips_no_prev_insn, mips_emit_delays)
1593 (macro_start): Replace uses of prev_insn* with the equivalent history[]
1594 field.
1596 2005-03-08 Daniel Jacobowitz <dan@codesourcery.com>
1598 * doc/Makefile.am: Update as.info dependencies.
1599 * aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.
1601 2005-03-08 Jan Beulich <jbeulich@novell.com>
1603 * doc/as.texinfo: Add sentence to indicate redefining a macro is an
1604 error, and point to .purgem documentation if someone really needs
1605 re-definitions.
1606 * NEWS: Mention macro redefinition is now an error.
1608 2005-03-08 Jan Beulich <jbeulich@novell.com>
1610 * config/tc-ia64.c (emit_one_bundle): Track last slot user insn was
1611 emitted to. Add more precise diagnostics for non-fitting insns based
1612 on that. Eliminate now superfluous special casing of MLX. Clear out
1613 slot information when dropping an insn.
1615 2005-03-08 Jan Beulich <jbeulich@novell.com>
1617 * config/tc-ia64.c (parse_section_name): Rename to...
1618 (cross_section): In addition to separating the name from the rest of
1619 the arguments, also carry out the operation.
1620 (dot_xdata): Use cross_section.
1621 (dot_float_cons): Likewise.
1622 (dot_xstringer): Likewise.
1623 (dot_xdata_ua): Likewise.
1624 (dot_float_cons_ua): Likewise. Pass float_cons, not stmt_float_cons.
1626 2005-03-05 Alan Modra <amodra@bigpond.net.au>
1628 * po/gas.pot: Regenerate.
1630 2005-03-04 David Daney <ddaney@avtrex.com>
1632 * config/tc-mips.c (macro_build_lui): Use '__gnu_local_gp'
1633 instead of '_gp' for -mno-shared optimization.
1634 (s_cpload): Ditto.
1635 (s_abicalls): Document it in the comment.
1636 (md_show_usage): Document the -mno-shared option.
1638 2005-03-04 Richard Sandiford <rsandifo@redhat.com>
1640 * config/tc-mips.c (mips_set_options): Add sym32 field.
1641 (mips_opts): Initialize it.
1642 (HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
1643 (HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
1644 (HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
1645 (load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
1646 when deciding whether to use a symbolic %highest/%higher expansion.
1647 (macro): Likewise. Remove o64/n32 linux hack. Always use
1648 ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
1649 and "la". Handle constants separately from symbolic expressions in
1650 the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
1651 and using load_register to load the high part of the address.
1652 (OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
1653 (OPTION_ELF_BASE): Bump by 2.
1654 (md_longopts): Add entries for -msym32 and -mno-sym32.
1655 (md_parse_option): Handle them.
1656 (usage): Document them.
1657 (s_mipsset): Handle ".set sym32" and ".set nosym32".
1658 (s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
1659 HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
1660 * doc/c-mips.texi: Document ".set sym32", ".set nosym32",
1661 -msym32 and -mno-sym32.
1663 2005-03-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1665 * config/tc-mips.c (load_address): Implement GP optimization
1666 for 64bit address space non-PIC. Fix formatting.
1667 (macro): Likewise. Simplify code.
1668 (md_parse_option): Don't bail out if -G 0 is set for PIC code.
1669 (mips_after_parse_args): Simplify code.
1671 2005-03-03 Nick Clifton <nickc@redhat.com>
1673 * expr.c (operand): Remove redundant code enclosed by #ifdef
1674 RELAX_PAREN_GROUPING....#endif.
1676 * config/tc-mn10200.c (tc_gen_reloc): Handle the case where the
1677 reloc is the difference of two symbols defined in the same
1678 section.
1680 * config/tc-iq2000.c (line_comment_chars): Include the # character
1681 as otherwise this breaks #APP/#NO_APP processing.
1683 2005-03-03 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
1685 * config/tc-arc.c(md_assemble): Remove dead code for handling
1686 immediate indexing of ld and st .
1688 2005-03-02 Daniel Jacobowitz <dan@codesourcery.com>
1689 Joseph Myers <joseph@codesourcery.com>
1691 * config/tc-mips.c (percent_op): Add %tlsgd, %tlsldm, %dtprel_hi,
1692 %dtprel_lo, %tprel_hi, %tprel_lo, and %gottprel.
1693 (parse_relocation): Check for a word break after a relocation
1694 operator.
1695 (md_apply_fix3): Handle TLS relocations, and mark thread-local
1696 symbols.
1698 2005-03-02 Alan Modra <amodra@bigpond.net.au>
1700 * config/tc-ppc.c (ppc_fix_adjustable <ELF>): Remove bogus checks.
1702 2005-03-02 Jan Beulich <jbeulich@novell.com>
1704 * as.c (main): Use unlink_if_ordinary instead of unlink.
1705 * messages.c (as_fatal): Likewise.
1707 2005-03-02 Jan Beulich <jbeulich@novell.com>
1709 * config/tc-i386.c (build_modrm_byte): Add lock prefix for cr8...15
1710 accesses.
1711 (parse_register): Allow cr8...15 in all modes.
1713 2005-03-02 Jan Beulich <jbeulich@novell.com>
1715 * config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
1716 etc. like normal symbol references (T_ID).
1718 2005-03-02 Alan Modra <amodra@bigpond.net.au>
1720 * symbols.c (fb_label_name): Fix silly thinko in last change.
1722 2005-03-02 Alan Modra <amodra@bigpond.net.au>
1724 * expr.c (integer_constant): Remove TARGET_WORD_SIZE hack.
1725 * config/tc-m68k.h (TARGET_WORD_SIZE): Delete.
1727 * symbols.c (fb_label_name): Allow an augend of 2 for mmix.
1729 2005-03-01 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
1731 PR gas/708
1732 * config/tc-arc.c (md_assemble): Initialize suffix for extension
1733 suffixes also.
1735 2005-03-01 Alan Modra <amodra@bigpond.net.au>
1737 * config/obj-coff.c (fixup_segment): Delete sy_mri_common assertion.
1739 * as.h (assert): Warning fix.
1740 * expr.c (expr): Correct assertion.
1741 * read.c (s_comm_internal): Remove assertion.
1742 * write.c (relax_segment): Enable vma assertion only for BFD_ASSEMBLER.
1743 (fixup_segment): Remove assertion.
1744 * config/tc-dlx.c (machine_ip): Remove untrue assertions.
1745 (md_apply_fix3): Likewise.
1746 * config/tc-i370.c (md_begin): Correct assertion.
1747 (i370_macro): Warning fix for assertion.
1749 2005-03-01 Alan Modra <amodra@bigpond.net.au>
1751 * configure.in (AC_C_BIGENDIAN): Invoke.
1752 * configure: Regenerate.
1753 * write.c (write_object_file <!BFD_ASSEMBLER>): Don't use sizeof
1754 host variable to set string header size.
1755 * config/obj-aout.c (obj_header_append): Don't use host structs.
1756 (obj_symbol_to_chars): Likewise.
1757 (obj_emit_strings): Likewise. Use the passed in output pointer.
1758 * config/obj-aout.h (H_GET_FILE_SIZE): Include H_GET_LINENO_SIZE.
1759 * config/obj-bout.c (obj_emit_relocations): Use md_reloc_size,
1760 not sizeof host struct.
1761 (obj_header_append, obj_symbol_to_chars): Don't use host structs.
1762 (obj_emit_strings): Likewise.
1763 * config/obj-bout.h (EXEC_BYTES_SIZE): Define.
1764 (N_TXTOFF, H_GET_FILE_SIZE, H_GET_HEADER_SIZE): Use instead of
1765 sizeof host struct.
1766 (H_SET_SYMBOL_TABLE_SIZE): Hard code sym size rather than using
1767 sizeof host struct.
1768 (host_number_to_chars): Define.
1769 * config/obj-hp300.c (hp300_header_append): Don't use sizeof
1770 host internal struct to set header sizes.
1771 * config/tc-i960.c (md_number_to_field): Warning fix.
1772 (md_ri_to_chars): Use host byte order.
1773 (get_cdisp, md_apply_fix3): Warning fix.
1774 * config/tc-m68k.c (md_assemble): Don't use sizeof host short.
1776 2005-02-28 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
1778 * doc/c-arc.texi: Update documentation about ARC's extension
1779 instructions.
1781 2005-02-27 Svein E. Seldal <svein@dev.seldal.com>
1783 * config/tc-tic4x.c (tic4x_gen_to_words): Changed mail
1784 address for myself.
1786 2005-02-23 Alan Modra <amodra@bigpond.net.au>
1788 * cgen.c: Warning fixes.
1789 * config/tc-arc.c: Likewise.
1790 * config/tc-arm.c: Likewise.
1791 * config/tc-avr.c: Likewise.
1792 * config/tc-d10v.c: Likewise.
1793 * config/tc-d30v.c: Likewise.
1794 * config/tc-frv.c: Likewise.
1795 * config/tc-frv.h: Likewise.
1796 * config/tc-h8300.c: Likewise.
1797 * config/tc-h8500.c: Likewise.
1798 * config/tc-i370.c: Likewise.
1799 * config/tc-i960.c: Likewise.
1800 * config/tc-ia64.c: Likewise.
1801 * config/tc-ip2k.c: Likewise.
1802 * config/tc-m68hc11.c: Likewise.
1803 * config/tc-maxq.c: Likewise.
1804 * config/tc-mcore.c: Likewise.
1805 * config/tc-mips.c: Likewise.
1806 * config/tc-msp430.c: Likewise.
1807 * config/tc-pj.c: Likewise.
1808 * config/tc-ppc.c: Likewise.
1809 * config/tc-ppc.h: Likewise.
1810 * config/tc-s390.c: Likewise.
1811 * config/tc-sh.c: Likewise.
1812 * config/tc-sh64.c: Likewise.
1813 * config/tc-tic4x.c: Likewise.
1814 * config/tc-tic80.c: Likewise.
1815 * config/tc-v850.c: Likewise.
1816 * config/tc-vax.c: Likewise.
1817 * config/tc-w65.c: Likewise.
1818 * config/tc-xstormy16.c: Likewise.
1819 * config/tc-z8k.c: Likewise.
1821 2005-02-22 Catherine Moore <clm@cm00re.com>
1823 * read.c (read_a_source_file): Reinstate TC_EQUAL_IN_INSN test.
1824 * doc/internals.texi (TC_EQUAL_IN_INSN): Reinstate.
1826 2005-02-22 Eric Christopher <echristo@redhat.com>
1828 * config/tc-mips.c (struct proc): Change isym to
1829 func_sym. New member func_end_sym.
1830 (s_mips_ent): Update.
1831 (s_mips_end): Ditto. Add code to compute function size.
1833 2005-02-22 Alan Modra <amodra@bigpond.net.au>
1835 * read.c: Warning fixes.
1836 * config/obj-elf.c: Likewise.
1838 2005-02-22 Maciej W. Rozycki <macro@mips.com>
1840 * config/tc-mips.c (append_insn): Call dwarf2_emit_insn() before
1841 emitting insn.
1843 2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
1845 * config/obj-coff.c (obj_coff_section): Replace SEC_SHARED with
1846 SEC_COFF_SHARED.
1848 * config/tc-tic54x.c (tic54x_bss): Replace SEC_BLOCK with
1849 SEC_TIC54X_BLOCK.
1850 (demand_empty_rest_of_line): Likewise.
1851 (tic54x_sblock): Likewise.
1852 (tic54x_clink): Replace with SEC_CLINK with SEC_TIC54X_CLINK.
1854 2005-02-21 Alan Modra <amodra@bigpond.net.au>
1856 * read.c (address_bytes): New function.
1857 (TC_ADDRESS_BYTES): Default for BSD_ASSEMBLER to address_bytes.
1858 (potable): Add "dc.a".
1859 (cons_worker): Handle "dc.a".
1860 * doc/internals.texi (TC_ADDRESS_BYTES): Document.
1862 2005-02-21 Alan Modra <amodra@bigpond.net.au>
1864 * input-file.c (input_file_open): Rearrange to avoid warning.
1866 2005-02-19 Alan Modra <amodra@bigpond.net.au>
1868 * config/tc-hppa.h (TC_EQUAL_IN_INSN): Delete.
1869 * read.c (read_a_source_file): Remove TC_EQUAL_IN_INSN test.
1870 * doc/internals.texi (TC_EQUAL_IN_INSN): Delete.
1872 2005-02-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1874 * config/tc-mips.c (macro_build_ldst_constoffset): Fail on $at
1875 uses after .set noat.
1876 (load_address): Likewise.
1877 (macro): Likewise. Don't try to avoid $at use by sacrificing
1878 the target register before it is stored, it won't work.
1880 2005-02-17 James E Wilson <wilson@specifixinc.com>
1882 * config/tc-ia64.c (emit_one_bundle): Stop filling a bundle if we
1883 see an instruction that specifies a template.
1885 2005-02-18 Alan Modra <amodra@bigpond.net.au>
1887 * config/tc-openrisc.c (openrisc_relax_frag): Delete unused function.
1888 * config/tc-sparc.c (sparc_ip): Make op_exp static to silence warnings.
1889 * config/tc-tic80.c (build_insn): Init insn[1] to silence warning.
1891 2005-02-17 H.J. Lu <hongjiu.lu@intel.com>
1893 * NEWS: Mention "-mhint.b=[ok|warning|error]".
1895 * config/tc-ia64.c (md): Add hint_b.
1896 (emit_one_bundle): Handle md.hint_b for "hint".
1897 (md_parse_option): Accepted "-mhint.b=[ok|warning|error]".
1898 (md_show_usage): Add "-mhint.b=[ok|warning|error]".
1899 (ia64_init): Set md.hint_b to error.
1900 (md_assemble): Handle md.hint_b for "hint.b".
1902 * doc/as.texinfo: Add "-mhint.b=[ok|warning|error]".
1903 * doc/c-ia64.texi: Likewise.
1905 2005-02-17 Alan Modra <amodra@bigpond.net.au>
1907 * tc.h (struct relax_type, relax_typeS): Move from here..
1908 * as.h: ..to here. Make rlx_forward and rlx_backward an offsetT.
1909 * ecoff.c (ecoff_new_file): Add appfile param.
1910 * ecoff.h (ecoff_new_file): Likewise.
1911 * itbl-lex.h: New file.
1912 * itbl-lex.l: Include itbl-lex.h.
1913 * itbl-parse.y: Likewise.
1914 (insntbl_line, yyparse, yylex): Move to itbl-lex.h.
1915 * read.c (s_app_file_string): Mark appfile possibly unused.
1916 * subsegs.c (seg_not_empty_p): Make sec possibly unused.
1917 * subsegs.h (struct seg_info_trash): Delete.
1918 (seg_info): Use segment_info_type instead.
1919 * config/obj-coff.c (struct filename_list): Make filename const char *.
1920 * config/obj-ecoff.h (obj_app_file): Pass app to ecoff_new_file.
1921 * config/obj-elf.c (elf_file_symbol): Similarly.
1922 * config/tc-a29k.c (md_apply_fix3): Make val a valueT. Don't use
1923 signed right shift.
1924 * config/tc-arc.c (md_operand): Warning fix.
1925 * config/tc-arm.c (arm_parse_reloc): Only define when OBJ_ELF.
1926 (md_begin): Rearrange #if defined OBJ_COFF || defined OBJ_ELF.
1927 * config/tc-cris.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Use do while.
1928 * config/tc-frv.c (frv_force_relocation): Warning fix.
1929 * config/tc-m68k.c (md_parse_option): Delete unused var.
1930 * config/tc-mcore.c (mylog2): Rename from log2 throughout.
1931 * config/tc-sparc.c: Likewise.
1932 (s_common): Warning fix.
1933 * config/tc-mips.c (append_insn): Use unsigned long long expressions.
1934 * config/tc-mmix.c (PUSHJSTUB_MAX, PUSHJSTUB_MIN): Define from
1935 addressT.
1936 * config/tc-s390.c (s390_insn): Delete test of unsigned >= 0.
1937 * config/tc-sh.c (sh_cfi_frame_initial_instructions,
1938 sh_regname_to_dw2regnum): Only define for OBJ_ELF.
1939 * config/tc-tic4x.c (tic4x_insert_reg): Use ISLOWER.
1940 (tic4x_do_align): Use TIC_NOP_OPCODE.
1941 * config/tc-tic4x.h (TIC_NOP_OPCODE): Rename from NOP_OPCODE.
1942 * config/tc-vax.c: Include netinet/in.h.
1943 (tc_headers_hook): Formatting.
1944 * config/tc-xstormy16.c (md_pcrel_from_section): Correct parens.
1946 2005-02-17 Jan Beulich <jbeulich@novell.com>
1948 * config/tc-ia64.c (ia64_parse_name): Don't advance 'name' when
1949 parsing inN, locN, outN. Set 'idx' to offset register number starts
1950 at. Don't handle numbers with leading zeroes or beyond 95. Remove
1951 pointless cast.
1953 2005-02-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1955 * config/tc-mips.c (load_address): Fix formatting.
1956 (macro): Don't use AT if .set noat is in effect. Fix formatting.
1957 Catch macros which are unexpandable without AT. Remove duplicate
1958 zeroing of used_at.
1959 (macro2): Remove duplicate zeroing of used_at.
1961 2005-02-16 Alan Modra <amodra@bigpond.net.au>
1963 * dw2gencfi.c (output_cie, output_fde): Use DW_CFA_nop rather
1964 than zero.
1966 2005-02-15 Nigel Stephens <nigel@mips.com>
1967 Maciej W. Rozycki <macro@mips.com>
1969 * config/tc-mips.c (reloc_needs_lo_p): Handle
1970 BFD_RELOC_MIPS16_HI16_S.
1971 (fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
1972 (append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
1973 and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
1974 complaints on.
1975 (mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
1976 BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
1977 Call my_getSmallExpression() to parse percent operators.
1978 (percent_op_match, mips_percent_op): Separate definitions.
1979 (mips16_percent_op): Define percent operators for the MIPS16 mode.
1980 (parse_relocation): Handle the MIPS16 mode using
1981 mips16_percent_op.
1982 (md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
1983 BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.
1985 2005-02-15 Jan Beulich <jbeulich@novell.com>
1987 * config/tc-ia64.c (md_apply_fix3): Call ia64_gen_real_reloc_type
1988 instead of explicitly dealing with the translation; exclude
1989 relocations that are already pcrel, however.
1991 2005-02-15 Jan Beulich <jbeulich@novell.com>
1993 * config/tc-ia64.c: Include limits.h (if available).
1994 (gr_values[0]): Set path to INT_MAX.
1995 (dot_reg_val): Don't allow changing value of r0. Limit range of
1996 general registers at r127.
1997 (specify_resource): Default resource index is -1. Don't set resource
1998 index (in case IA64_RS_RSE) without setting the specific flag.
1999 (note_register_values): Check operand is O_constant before tracking
2000 input value of moves. Add tracking for dep.z with constant inputs.
2001 (print_dependency): Resource index of specific resource may be zero.
2002 (check_dependencies): Likewise.
2004 2005-02-15 Jan Beulich <jbeulich@novell.com>
2006 * config/tc-ia64.c (parse_operands): New local variables reg1, reg2,
2007 reg_class. Check operands and emit diagnostics for illegal use of
2008 registers.
2010 2005-02-15 Jan Beulich <jbeulich@novell.com>
2012 * config/tc-ia64.c (ia64_gen_real_reloc_type): Define and initialize
2013 new variables type, suffix, and width. Handle
2014 BFD_RELOC_IA64_DIR(32|64)[LM]SB in FUNC_LT_FPTR_RELATIVE case.
2015 Handle BFD_RELOC_IA64_DIR64[LM]SB in FUNC_TP_RELATIVE case. Add
2016 FUNC_DTP_MODULE case. Handle BFD_RELOC_IA64_DIR32[LM]SB in
2017 FUNC_DTP_RELATIVE case. Return incoming relocation type if
2018 BFD_RELOC_IA64_IPLT[LM]SB in FUNC_IPLT_RELOC case. Generate warning
2019 if unable to translate relocation type, using the new variables.
2021 2005-02-15 Jan Beulich <jbeulich@novell.com>
2023 * config/tc-ia64.h (ia64_symbol_chars): Declare.
2024 (ty_symbol_chars): Define.
2025 * config/tc-ia64.c (ia64_symbol_chars): Define.
2027 2005-02-15 Jan Beulich <jbeulich@novell.com>
2029 * config/tc-ia64.c (ia64_parse_name): Only update next character if
2030 input_line_pointer was advanced.
2032 2005-02-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
2034 * config/tc-sh.c (md_apply_fix3): Add parentheses around &
2035 within |.
2037 2005-02-13 Jan Beulich <jbeulich@novell.com>
2039 * config/tc-ia64.c (md_parse_option): Handle -xnone and -xdebugn.
2040 (md_show_usage): Add -xnone, -xdebugn, and -xdebugx. Relocate default
2041 indicator.
2042 (ia64_init): Set md.detect_dv.
2043 (ia64_start_line): New static variable warned. Warn only once when
2044 encountering explicit stops in automatic mode.
2045 * doc/c-ia64.texi: Describe -xnone, -xdebugn, and -xdebugx.
2046 * NEWS: Mention new default mode.
2048 2005-02-13 Jan Beulich <jbeulich@novell.com>
2050 * config/tc-ia64.c (dot_rot): Add comment that name strings should
2051 be freed when wiping out previous state. Canonicalize names before
2052 use. Free name string when detecting redefinition.
2053 (dot_pred_rel): Call generic expression parser to process arguments.
2054 Handle O_register case for individual predicates and O_subtract for
2055 ranges.
2056 (ia64_parse_name): Canonicalize name before looking it up in dynamic
2057 register hash.
2058 (ia64_canonicalize_symbol_name): Strip off all trailing # characters.
2059 Warn if multiple found, issue error if resulting symbol name has zero
2060 length.
2061 (dot_alias): Canonicalize name before use.
2063 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
2065 * config/tc-ia64.c (unwind_diagnostic): Return -1 for warning
2066 and 0 for error.
2067 (in_procedure): Return -1 for warning.
2068 (in_prologue): Likewise.
2069 (in_body): Likewise.
2071 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
2073 * config/tc-ia64.c (dot_xdata): Undo the last change.
2074 (dot_float_cons): Likewise.
2075 (dot_xstringer): Likewise.
2076 (dot_xdata_ua): Likewise.
2077 (dot_float_cons_ua): Likewise.
2079 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
2081 * NEWS: Mention "-munwind-check=[warning|error]".
2083 * config/tc-ia64.c (md): Add unwind_check.
2084 (unwind_diagnostic): New.
2085 (in_procedure): Call unwind_diagnostic when a directive isn't
2086 in procedure.
2087 (in_prologue): Call unwind_diagnostic when a directive isn't in
2088 prologue.
2089 (in_body): Call unwind_diagnostic when a directive isn't in
2090 body region.
2091 (dot_endp): Set md.unwind_check to error before calling
2092 in_procedure and restore it after. When the name is missing or
2093 couldn't be found, use the one from the last .proc if
2094 md.unwind_check isn't error. Warn if md.unwind_check is
2095 warning.
2096 (md_parse_option): Handle "-munwind-check=[warning|error]".
2097 (md_show_usage): Add "-munwind-check=[warning|error]".
2098 (ia64_init): Set md.unwind_check to warning.
2100 * doc/as.texinfo: Add "-munwind-check=[none|warning|error]".
2101 * doc/c-ia64.texi: Likewise.
2103 2005-02-11 Jan Beulich <jbeulich@novell.com>
2105 * config/tc-ia64.h (LEX_AT): Include LEX_BEGIN_NAME.
2106 (LEX_QM): Likewise.
2107 (ia64_parse_name): New third parameter.
2108 (md_parse_name): Pass third argument.
2109 * config/tc-ia64.c (pseudo_func): Placeholders use NULL as name.
2110 (md_operand): Handling of '@'-prefixed symbols moved from here...
2111 (ia64_parse_name): ...to here.
2113 2005-02-11 Jan Beulich <jbeulich@novell.com>
2115 * config/tc-ia64.c (md): Remove last_groups and group_idx.
2116 (errata_nop_necessary_p): Remove declaraction and definition.
2117 (emit_one_bundle): Don't call errata_nop_necessary_p. Don't
2118 update md.group_idx. Don't reset md.last_groups.
2120 2005-02-11 Jan Beulich <jbeulich@novell.com>
2122 * config/tc-ia64.c (parse_section_name): Handle non-quoted first
2123 argument.
2124 (dot_xdata): Free section name after use.
2125 (dot_float_cons): Likewise.
2126 (dot_xstringer): Likewise.
2127 (dot_xdata_ua): Likewise.
2128 (dot_float_cons_ua): Likewise.
2129 (md_pseudo_table): Add xdata16 and xdata16.ua.
2131 2005-02-10 H.J. Lu <hongjiu.lu@intel.com>
2133 * doc/all.texi: Add IA64.
2134 * doc/as.texinfo: Likewise.
2136 * doc/c-ia64.texi: Fix typos.
2138 2005-02-10 Julian Brown <julian@codesourcery.com>
2140 * config/tc-arm.c (do_t_ldmstm): Change BFD_RELOC_NONE to
2141 BFD_RELOC_UNUSED.
2142 (do_t_push_pop): Likewise.
2143 (md_assemble): Likewise.
2144 (md_apply_fix3): Handle BFD_RELOC_NONE correctly, make
2145 BFD_RELOC_UNUSED same as previous meaning of BFD_RELOC_NONE.
2146 (create_unwind_entry): Output dependency on the required personality
2147 routines.
2149 2005-02-07 Nathan Sidwell <nathan@codesourcery.com>
2151 * as.h (seg_not_empty_p): Return int, not bfd_boolean.
2152 * subsegs.c (seg_not_empty_p): Likewise.
2154 2005-02-07 Inderpreet Singh <inderpreetb@noida.hcltech.com>
2156 * config/tc-maxq.c (md_estimate_size_before_relax): Correct the
2157 relative jump calculation.
2158 <md_convert_frag) : Likewise.
2159 <output_disp): Likewise.
2161 2005-02-07 Hans-Peter Nilsson <hp@axis.com>
2163 * write.c (write_object_file): Recognize warning-symbol construct
2164 and skip object- and target- handling for the second symbol.
2166 2005-02-02 Jan Beulich <jbeulich@novell.com>
2168 * config/tc-ia64.c (dot_pred_rel): Update comment. Handle @-prefixed
2169 designators along with quoted ones. Free copy of quoted designator
2170 when done.
2172 2005-02-01 Ben Elliston <bje@au.ibm.com>
2174 * config/atof-ieee.c, config/obj-coff.c, config/obj-elf.c,
2175 config/obj-ieee.c, config/obj-som.c, config/obj-vms.c,
2176 config/tc-a29k.c, config/tc-alpha.c, config/tc-arc.c,
2177 config/tc-arm.c, config/tc-d30v.c, config/tc-dlx.c,
2178 config/tc-fr30.c, config/tc-h8300.c, config/tc-h8500.c,
2179 config/tc-i370.c, config/tc-i386.c, config/tc-i960.c,
2180 config/tc-ia64.c, config/tc-m32r.c, config/tc-m32r.h,
2181 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-mips.c,
2182 config/tc-mn10200.c, config/tc-msp430.c, config/tc-ns32k.c,
2183 config/tc-openrisc.c, config/tc-or32.c, config/tc-pdp11.c,
2184 config/tc-pj.c, config/tc-sparc.h, config/tc-tic54x.c,
2185 config/tc-tic80.c, config/tc-v850.c, config/tc-w65.c,
2186 config/tc-xtensa.c, config/tc-z8k.c, config/xtensa-relax.c: Remove
2187 #if 0'd code throughout.
2189 2005-01-31 Nick Clifton <nickc@redhat.com>
2191 * as.c (parse_args): Bump copyright date reported by --version to
2192 2005.
2194 2005-01-31 Nick Clifton <nickc@redhat.com>
2196 * configure.tgt: Remove obsolete targets m68k-lynxos, sparc-lynxos
2197 and vax-vms.
2199 2005-01-31 Jan Beulich <jbeulich@novell.com>
2201 * macro.c (buffer_and_nest): Allow 'from' being NULL; handle anything
2202 that can end with .endr in that case. Make requiring/permitting
2203 pseudo-ops without leading dot closer to the logic in read.c serving
2204 the same purpose.
2205 (expand_irp): Don't pass a mnemonic to buffer_and_nest as it will be
2206 ignored.
2208 2005-01-31 Jan Beulich <jbeulich@novell.com>
2210 * macro.c (do_formals): Adjust to no longer accept empty parameter
2211 names.
2212 (define_macro): Adjust to no longer accept empty macro name, garbage
2213 following the parameters, or macros that were previously defined.
2214 * read.c (s_bad_end): Declare.
2215 (potable): Add endm. Handler for endr and endm is s_bad_end.
2216 (s_bad_end): Rename from s_bad_endr. Adjust to handle both .endm
2217 and .endr.
2218 * read.h (s_bad_endr): Remove.
2220 2005-01-31 Jan Beulich <jbeulich@novell.com>
2222 * config/tc-ia64.c (parse_operands): Parse all specified operands,
2223 immediately discarding (but counting) those exceeding the maximum
2224 possible amount. Track whether output and input operand counts ever
2225 matched, and use this to better indicate which of the operands/
2226 operand types was wrong; specifically don't default to pointing to
2227 the first operand.
2229 2005-01-31 Jan Beulich <jbeulich@novell.com>
2231 * config/tc-ia64.c (unwind): Remove proc_end (now an automatic
2232 variable in dot_endp). Add body and insn. Make prologue,
2233 prologue_mask, body, and insn bitfields.
2234 (fixup_unw_records): Remove spurious new-lines from end of diagnostic
2235 messages.
2236 (in_procedure, in_prologue, in_body): New.
2237 (dot_fframe, dot_vframe, dot_vframesp, dot_vframepsp, dot_save,
2238 dot_restore, dot_restorereg, dot_restorereg_p, dot_handlerdata,
2239 dot_unwentry, dot_altrp, dot_savemem, dot_saveg, dot_savef, dot_saveb,
2240 dot_savegf, dot_spill, dot_spillreg, dot_spillmem, dot_spillreg_p,
2241 dot_spillmem_p, dot_label_state, dot_copy_state, dot_unwabi,
2242 dot_personality): Use the appropriate one of the above.
2243 (dot_proc): Clear unwind.proc_start; set to current location only if
2244 none of the entry points were valid. Check for non-zero-length entry
2245 point names. Check that entry points aren't defined, yet. Clear
2246 unwind.prologue, unwind.body, and unwind.insn.
2247 (dot_body): Call in_procedure. Check that first directive in procedure
2248 had no insns emitted before. Set unwind.body.
2249 (dot_prologue): Call in_procedure. Check that not already in prologue.
2250 Check that first directive in procedure had no insns emitted before.
2251 Clear unwind.body.
2252 (dot_endp): Call in_procedure. Declare proc_end. Check for non-zero-
2253 length entry point names. Check that entry points became defined.
2254 (md_assemble): Set unwind.insn once unwind.proc_start is defined.
2256 2005-01-31 Jan Beulich <jbeulich@novell.com>
2258 * config/tc-ia64.c (emit_one_bundle): Snapshot manual bundling state
2259 before actually using it. Don't generate an error in manual bundling
2260 mode when looking at an insn requiring slot 2 but not yet at slot 2.
2261 Don't generate an error in manual bundling mode when looking at an
2262 insn required to be last in its group but the required slot hasn't
2263 been reached, yet. Allow conversion from MII to MI;I for bundle
2264 consisting of only 2 insns with the stop between them. Suppress
2265 various meaningless errors resulting from detecting earlier ones.
2267 2005-01-31 Jan Beulich <jbeulich@novell.com>
2269 * config/tc-ia64.c (parse_operands): Also handle alloc without first
2270 input being ar.pfs.
2272 2005-01-28 Christian Groessler <chris@groessler.org>
2274 * config/tc-z8k.c (md_assemble): Improve error detection.
2276 2005-01-28 Jan Beulich <jbeulich@novell.com>
2278 * config/tc-ia64.c (ia64_estimate_size_before_relax): Allocate space
2279 for personality routine pointer only if there is one.
2280 (ia64_convert_frag): Likewise.
2281 (generate_unwind_image): Likewise.
2283 2005-01-27 Christian Groessler <chris@groessler.org>
2285 * config/tc-z8k.c (INSERT): Remove, not used anywhere.
2286 (md_apply_fix3): Make relative branches out of range an error
2287 instead of a warning. Display correct line number for out of
2288 range branches/calls/memory accesses.
2290 2005-01-27 Nathan Sidwell <nathan@codesourcery.com>
2292 * dwarf2dbg.c (dwarf2_finish): Correct logic for determining when
2293 to emit .debug_line and other debug sections.
2294 * as.h (seg_not_empty_p): Declare.
2295 * subsegs.c (seg_not_empty_p): New predicate.
2297 2005-01-27 Andrew Cagney <cagney@gnu.org>
2299 * configure: Regenerate to track ../gettext.m4 change.
2301 2005-01-27 Jan Beulich <jbeulich@novell.com>
2303 * config/tc-ia64.c (emit_one_bundle): Change "?imbf??" to "?ibmfxx".
2305 2005-01-27 Jan Beulich <jbeulich@novell.com>
2307 * config/tc-ia64.c (emit_one_bundle): Add late resolution of move
2308 to/from application registers dynamic insns.
2309 (md_assemble): Defer resolution of move to/from application registers
2310 dynamic insns when they can be issued on either the I- or M-units.
2312 2005-01-25 Alexandre Oliva <aoliva@redhat.com>
2314 * config/tc-frv.c (md_apply_fix3): Mark TLS symbols as such.
2315 2004-12-10 Alexandre Oliva <aoliva@redhat.com>
2316 * config/tc-frv.c (frv_pic_ptr): Add tlsmoff support.
2317 2004-11-10 Alexandre Oliva <aoliva@redhat.com>
2318 * cgen.c (gas_cgen_parse_operand): Handle
2319 CGEN_PARSE_OPERAND_SYMBOLIC.
2320 * config/tc-frv.c (md_cgen_lookup_reloc): Handle TLS relocations.
2321 (frv_force_relocation): Likewise. Fix handling of PIC
2322 relocations.
2323 (md_apply_fix3): Likewise.
2325 2005-01-21 Ben Elliston <bje@au.ibm.com>
2327 * as.h: Remove #if 0'd code.
2328 * atof-generic.c (atof_generic): Likewise.
2329 * ecoff.c (ecoff_directive_frame): Likewise.
2330 * frags.h (FRAG_APPEND_1_CHAR): Likewise.
2331 * itbl-ops.c (itbl_add_reg): Likewise.
2332 * listing.c (calc_hex): Likewise.
2333 * read.c (MASK_CHAR): Likewise.
2334 * subsegs.c (subsegs_print_statistics): Likewise.
2335 * symbols.c (indent): Likewise.
2336 * write.c (write_relocs): Likewise.
2337 (write_object_file): Likewise.
2338 (relax_frag): Likewise.
2340 2005-01-20 Nick Clifton <nickc@redhat.com>
2342 * as.c (std_longopts): Add an entry for "--a" in order to prevent
2343 getopt_long_only() from considering -a as an abbreviation for
2344 --alternate.
2345 (parse_args): Fix the parsing of -a=<file>.
2347 2005-01-20 Alan Modra <amodra@bigpond.net.au>
2349 PR gas/684
2350 * read.c (s_incbin): Adjust default count for skip. Check validity
2351 of count and skip rigorously.
2353 2005-01-19 Fred Fish <fnf@specifixinc.com>
2355 * config/tc-mips.c (dummy_opcode): Add init for new struct member.
2357 2005-01-19 Richard Sandiford <rsandifo@redhat.com>
2359 * read.c (convert_to_bignum): New function, split out from...
2360 (emit_expr): ...here. Handle the case where X_add_number is
2361 positive and the input value is negative.
2362 (output_big_sleb128): Fix setting of continuation bit. Check whether
2363 the final byte needs to be sign-extended. Fix size-shrinking loop.
2364 (emit_leb128_expr): When generating a signed leb128, see whether the
2365 sign of an O_constant's X_add_number matches the sign of the input
2366 value. Use a bignum if not.
2368 2005-01-17 Andrew Stubbs <andrew.stubbs@st.com>
2370 * tc-sh.c (md_begin,md_parse_option): Change arch_sh1_up to
2371 arch_sh_up in order to match the external name and make the
2372 testsuite's job easier.
2374 2005-01-14 H.J. Lu <hongjiu.lu@intel.com>
2376 PR 659
2377 * config/tc-i386.c (i386_scale): Disallow 0 scale.
2379 2005-01-12 Nick Clifton <nickc@redhat.com>
2381 * config/tc-iq2000.c (s_iq2000_set): Fix thinko parsing
2382 ignored_arguments array.
2384 2005-01-10 H.J. Lu <hongjiu.lu@intel.com>
2386 * write.c (write_object_file): Disallow a symbol equated to
2387 common symbol.
2389 2005-01-10 Inderpreet Singh <inderpreetb@noida.hcltech.com>
2391 * tc-maxq.c: Replace constants 10 and 20 with bfd_mach_maxq10 and
2392 bfd_mach_maxq20.
2393 (md_pseudo_table): Add new pseudo ops for maxq10 and maxq20.
2394 (maxq_target): New function: Set the machine type.
2396 2005-01-06 Paul Brook <paul@codesourcery.com>
2398 * config/tc-arm.c (FPU_DEFAULT): Define for TE_VXWORKS.
2399 (md_begin): Handle TE_VXWORKS for FP defaults.
2400 (md_apply_fix3): Correct rela offsets.
2401 (elf32_arm_target_format): Add VxWorks targets.
2403 2005-01-06 Paul Brook <paul@codesourcery.com>
2405 * configure.tgt: Set em=vxworks for *-*-vxworks.
2406 * config/te-vxworks.h: New File.
2408 2005-01-06 Paul Brook <paul@codesourcery.com>
2410 * config/tc-arm.c (arm_cpus): Correct arch field for arm1026ej-s.
2412 2005-01-04 Dmitry Diky <diwil@spec.ru>
2414 * config/tc-msp430.c (md_apply_fix3): Fix offset calculation for
2415 global label.
2417 2005-01-03 David Mosberger <davidm@hpl.hp.com>
2419 * config/tc-ia64.c (md): Add member "loc_directive_seen".
2420 (dot_loc): New function.
2421 (md_pseudo_table): Add entry to map .loc to dot_loc().
2422 (emit_one_bundle): Only call dwarf2_gen_line_info() if we have
2423 seen a .loc directive or we're generating DWARF2 debug info for
2424 assembly source.
2426 2004-12-29 Alan Modra <amodra@bigpond.net.au>
2428 PR gas/619
2429 * read.c (s_comm_internal): Don't zero end of name until size
2430 expression has been parsed.
2432 2004-12-25 Marek Michalkiewicz <marekm@amelek.gda.pl>
2434 * config/tc-avr.c (mcu_types): Move attiny{13,2313} from avr4 to avr2.
2436 2004-12-23 Tomer Levi <Tomer.Levi@nsc.com>
2438 * config/tc-crx.c: Support 'bcop' relaxation (dealt as in 'cmp&branch'
2439 case).
2441 2004-12-22 Ian Lance Taylor <ian@airs.com>
2443 * configure.tgt: New.
2444 * configure.in: Move setting of cpu_type, fmt, etc., to
2445 configure.tgt.
2446 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
2447 $(srcdir)/configure.tgt.
2448 * configure, Makefile.in: Rebuild.
2450 2004-12-22 Klaus Rudolph <lts-rudolph@gmx.de>
2452 * config/tc-avr.c: Add support for the new R_AVR_LDI, R_AVR_6 and
2453 R_AVR_6_ADIW relocs for the LDI, ADIW/SBIW and LDD/STD
2454 instructions.
2455 (avr_offset_expression): New function to parse offsets for LDI
2456 instructions.
2457 (avr_operand): Use it.
2458 (md_apply_fix3): Generate the relocs.
2460 2004-12-16 Andrew Stubbs <andrew.stubbs@st.com>
2462 * config/tc-sh64.c (shmedia_md_apply_fix3): Add missing
2463 BFD_RELOC_SH_IMMS10BY8 relocation.
2465 * config/tc-sh64.c (shmedia_build_Mytes): Emit an error message rather
2466 than just ignoring bad code.
2468 2004-12-16 Richard Sandiford <rsandifo@redhat.com>
2470 * config/tc-v850.c (handle_lo16): New function.
2471 (v850_reloc_prefix): Use it to check lo().
2472 (md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.
2474 2004-12-14 P.J. Darcy <darcypj@us.ibm.com>
2476 * configure.in: Add s390x-ibm-tpf support.
2477 * configure: Regenerate.
2479 2004-12-15 Jan Beulich <jbeulich@novell.com>
2481 * config/obj-elf.c (obj_elf_change_section): Only set type and
2482 attributes on new sections. Emit warning when type of re-declared
2483 section doesn't match.
2485 2004-12-15 Jan Beulich <jbeulich@novell.com>
2487 * dw2gencfi.c (dot.cfi.startproc): Clear cur_cfa_offset so
2488 '.cfi_startproc simple' doesn't inherit the old value.
2490 2004-12-15 Jan Beulich <jbeulich@novell.com>
2492 * dw2gencfi.c (output_cfi_insn): Adjust DW_CFA_def_cfa_sf generation
2493 to emit a signed and factored offset. Adjust DW_CFA_def_cfa_offset_sf
2494 generation to emit a factored offset.
2496 2004-12-10 Ian Lance Taylor <ian@wasabisystems.com>
2498 * config/tc-mips.c (macro) [M_LA_AB]: Give an error for a offset
2499 which is too large in the case of NO_PIC without 64-bit
2500 addresses.
2502 * config/tc-mips.c (mips_in_shared): New static variable.
2503 (macro_build_lui): Permit "_gp" if !mips_in_shared.
2504 (md_longopts): Add -mshared and -mno-shared.
2505 (md_parse_option): Handle OPTION_MSHARED and OPTION_MNO_SHARED.
2506 (s_cpload): Implement !mips_in_shared case.
2507 (s_cpsetup): Likewise.
2508 * doc/c-mips.texi (MIPS Opts): Document -mno-shared.
2509 * NEWS: Mention -mno-shared.
2511 2004-12-09 Paul Brook <paul@codesourcery.com>
2513 * config/tc-arm.c (s_arm_unwind_fnend): Use R_ARM_PREL31 relocation
2514 for function start.
2516 2004-12-09 Ian Lance Taylor <ian@wasabisystems.com>
2518 * config/tc-mips.c (append_insn): If we emit a nop during a relax
2519 sequence, increase the size of the sequence.
2521 * config/tc-mips.c (mips_cpu_info_table): Change "9000" entry to
2522 use CPU_RM9000.
2524 2004-12-07 Ben Elliston <bje@gnu.org>
2526 * read.c (s_align): Use an align_limit temporary to allay a GCC
2527 signed/unsigned comparison warning.
2529 2004-12-01 Mark Mitchell <mark@codesourcery.com>
2531 * Makefile.am (TARG_ENV_HFILES): Add te-armlinuxeabi.h.
2532 * configure.in: Use it for arm*-*-linux-gnueabi*.
2533 * config/tc-arm.c: Allow emulation file to set FPU_DEFAULT.
2534 * config/te-armlinuxeabi.h: New file.
2535 * Makefile.in: Regenerated.
2536 * aclocal.m4: Likewise.
2537 * configure: Likewise.
2538 * doc/Makefile.in: Regenerated.
2540 2004-12-02 Bob Wilson <bob.wilson@acm.org>
2542 * config/tc-xtensa.c (xtensa_switch_section_emit_state): Use subseg_set.
2543 (xtensa_restore_emit_state): Likewise.
2545 2004-12-02 Alan Modra <amodra@bigpond.net.au>
2547 * read.c (ALIGN_LIMIT): Define, increasing limit for BFD_ASSEMBLER.
2548 (s_align): Use it.
2550 2004-11-30 Tero Niemela <tero_niemela@yahoo.com>
2552 * Makefile.am: Change LOCALEDIR to $(datadir)/share.
2553 * Makefile.in: Regenerate.
2555 2004-11-29 Tomer Levi <Tomer.Levi@nsc.com>
2557 * config/tc-crx.c: Major code cleanup. Remove unused variables and
2558 functions, give functions a meaningful name, add comments.
2559 (check_range): New function - Replace operand size calculation
2560 with range checking.
2561 (assemble_insn): Update Algorithm, improve error issuing.
2562 (enum op_err): New.
2563 (process_label_constant): Bug fix regarding COP_BRANCH_INS relocation
2564 handling.
2566 2004-11-29 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
2568 * config/tc-m32r.c (md_pcrel_from_section): Fixed a pcrel relocte
2569 miss between different section in the same module.
2570 (tc_gen_reloc): Likewise.
2572 2004-11-25 Theodore A. Roth <troth@openavr.org>
2574 * gas/config/tc-avr.c (mcu_types): Add support for atmega165,
2575 atmega325, atmega3250, atmega645 and atmega6450.
2577 2004-11-25 Jan Beulich <jbeulich@novell.com>
2579 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
2580 permissible for the selected instruction suffix.
2581 (process_suffix): For DefaultSize instructions, suppressing the
2582 guessing of a 'q' suffix if the instruction doesn't support it is
2583 pointless, because only an 'l' suffix can be guessed in this place.
2585 2004-11-24 Nick Clifton <nickc@redhat.com>
2587 * config/tc-iq2000.c: Remove support for IQ10 processor.
2588 Convert to ISO C90 formatting.
2589 * config/tc-iq2000.h: Likewise.
2591 2004-11-23 Nick Clifton <nickc@redhat.com>
2593 * config/tc-mn10300.c (md_relax_table): More fixes to the offsets
2594 in this table. They should be correct now.
2596 2004-11-23 Jan Beulich <jbeulich@novell.com>
2598 * config/tc-i386.h (CpuMMX2): Declare. Artificial classifier to
2599 indicate the MMX extensions added by both SSE and 3DNow!A.
2600 (Cpu3dnowA): Declare.
2601 (CpuUnknownFlags): Update.
2602 * config/tc-i386.c (cpu_sub_arch_name): Declare.
2603 (cpu_arch): i586 and pentium do not imply MMX. i686 and pentiumpro do
2604 neither imply SSE nor MMX. k6 implies MMX. k6_2 additionally implies
2605 3DNow!. Athlon additionally implies 3DNow!A. Several new
2606 entries (those starting with a dot are for sub-arch specification).
2607 (set_cpu_arch): Handle sub-arch specifications.
2608 (parse_insn): Distinguish between instructions not supported because
2609 of insufficient CPU features and because of 64-bit mode.
2610 * doc/c-i386.texi: Describe enhanced .arch directive.
2612 2004-11-22 Bob Wilson <bob.wilson@acm.org>
2614 * config/tc-xtensa.c (xg_add_opcode_fix): Set fx_no_overflow.
2616 2004-11-22 Bob Wilson <bob.wilson@acm.org>
2618 * dwarf2dbg.c (dwarf2_finish): Don't write a .debug_line section
2619 without a corresponding .debug_info section.
2621 2004-11-22 Hans-Peter Nilsson <hp@axis.com>
2623 * read.c (potable): Add "error" and "warning".
2624 (s_errwarn): New function.
2625 * read.h (s_errwarn): Declare.
2626 * doc/as.texinfo (Error, Warning): Document .error and .warning.
2628 2004-11-22 Nick Clifton <nickc@redhat.com>
2630 * config/tc-tic54x.c (tic54x_adjust_symtab): Adjust call to
2631 c_dot_file_symbol.
2633 2004-11-19 Alan Modra <amodra@bigpond.net.au>
2635 * config/tc-msp430.c (struct rcodes_s, MSP430_RLC, msp430_rcodes,
2636 struct hcodes_s, msp430_hcodes): From include/opcode/msp430.h.
2638 2004-11-19 Alan Modra <amodra@bigpond.net.au>
2640 * config/obj-coff.c (c_dot_file_symbol): Add "app" param.
2641 (coff_adjust_symtab): Adjust call.
2642 (crawl_symbols): Likewise.
2643 * config/obj-coff.h (c_dot_file_symbol): Add "app" param.
2644 (obj_app_file): Adjust.
2646 2004-11-18 Inderpreet Singh <inderpreetb@nioda.hcltech.com>
2648 * configure.in: Enable bfd_assember for the MAXQ port.
2649 * configure: Regenerate.
2651 2004-11-12 Bob Wilson <bob.wilson@acm.org>
2652 Sterling Augustine <sterling@tensilica.com>
2654 * config/tc-xtensa.c (finish_vinsn): Clear pending instruction if
2655 there is a conflict.
2656 (check_t1_t2_reads_and_writes): Check for both reads and writes to
2657 interfaces that are related as determined by xtensa_interface_class_id.
2659 2004-11-12 Nick Clifton <nickc@redhat.com>
2661 * config/tc-mn10300.c (md_relax_table): Fix off by one negative
2662 offsets for conditional branches.
2664 2004-11-11 Bob Wilson <bob.wilson@acm.org>
2666 * config/tc-xtensa.c (MAX_IMMED6): Change value to 65.
2668 2004-11-10 Bob Wilson <bob.wilson@acm.org>
2670 * config/tc-xtensa.c (update_next_frag_state): Always add a NOP if
2671 relaxing at the end of a loop. Don't mark frags as UNREACHABLE or
2672 MAYBE_UNREACHABLE.
2673 (relax_frag_immed): Update call to update_next_frag_state.
2675 2004-11-10 Alan Modra <amodra@bigpond.net.au>
2677 * obj.h (struct format_ops <app_file>): Add int param.
2678 * read.h (s_app_file_string): Likewise.
2679 * read.c (s_app_file_string): Likewise.
2680 (s_app_file): Adjust s_app_file_string call.
2681 * config/tc-mips.c (s_mips_file): Likewise.
2682 * config/obj-coff.h (obj_app_file): Add app param.
2683 * config/obj-ecoff.h (obj_app_file): Likewise.
2684 * config/obj-multi.h (obj_app_file): Likewise.
2685 * config/obj-elf.h (elf_file_symbol): Likewise.
2686 * config/obj-elf.c (elf_file_symbol): Only emit one file symbol
2687 if called for # preprocessor lines.
2689 2004-11-08 H.J. Lu <hongjiu.lu@intel.com>
2691 PR 528
2692 * symbols.c (resolve_symbol_value): Convert weak symbols only
2693 for Windows PECOFF.
2694 (symbol_equated_reloc_p): Don't equate weaks when relocating
2695 only for Windows PECOFF.
2697 2004-11-08 Tomer Levi <Tomer.Levi@nsc.com>
2699 * config/tc-crx.c (print_insn): Check and set insn_addr.
2700 * config/tc-crx.h (md_frag_check): Define.
2702 2004-11-08 Inderpreet Singh <inderpreetb@nioda.hcltech.com>
2703 Vineet Sharma <vineets@noida.hcltech.com>
2705 * configure.in: Add support for new target maxq-coff.
2706 * configure: Regenerate.
2707 * NEWS: Mention new support.
2708 * config/tc-maxq.c: New file.
2709 * config/tc-maxq.h: New file.
2710 * config/obj-coff.h: Add support for maxq-coff.
2712 2004-11-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
2714 * symbols.c (any_external_name): Define.
2715 (resolve_symbol_value): Convert weak symbols.
2716 (S_SET_EXTERNAL): Support any_external_name.
2717 (S_SET_NAME): Qualify parameter const.
2718 (symbol_equated_reloc_p): Equate to weaks when relocating.
2719 * symbols.h (S_SET_NAME): Qualfiy parameter const.
2720 * tc.h (any_external_name): Declare.
2721 * config/obj-coff.c ("coff/pe.h"): Include for BFD
2722 assemblers also.
2723 (weak_is_altname): Declare and define.
2724 (weak_name2altname): Same.
2725 (weak_altname2name): Same.
2726 (weak_uniquify): Same.
2727 (weak_altprefix): Define.
2728 (obj_coff_weak): Change .weak syntax and handling.
2729 (coff_frob_symbol): Fix PE weak symbol alternates.
2730 * config/obj-coff.h (USE_UNIQUE): Define.
2731 * config/tc-i386.c (md_apply_fix3): Assume weak symbols
2732 are in another segment.
2733 (tc_gen_reloc): Remove broken addend hack.
2734 doc/as.texinfo: Update.
2736 2004-11-05 Sterling Augustine <sterling@tensilica.com>
2738 * config/tc-xtensa.c (total_frag_text_expansion): New.
2739 (md_estimate_size_before_relax): Use it.
2740 (find_address_of_next_align_frag): Likewise.
2742 2004-11-05 Tomer Levi <Tomer.Levi@nsc.com>
2744 * config/tc-crx.c: Rename argument types.
2745 (processing_arg_number): Rename to 'cur_arg_num'.
2746 (get_number_of_bits): Rename to 'set_operand_size'.
2747 (get_operandtype): Rename to 'parse_operand', totally rewrite.
2748 (set_cons_rparams): Rename to 'set_operand', totally rewrite.
2749 (set_indexmode_parameters): Remove function, integrate its code into
2750 'set_operand'.
2751 (set_operand_size): Get rid of 'Operand Number' function parameter -
2752 use global variable 'cur_arg_num' instead.
2753 Use a local 'argument' pointer to reference the current argument.
2754 (parse_operand): Likewise.
2755 (set_operand): Likewise.
2756 (process_label_constant): Likewise.
2758 2004-11-04 Bob Wilson <bob.wilson@acm.org>
2760 * config/tc-xtensa.c: Remove XTENSA_SECTION_RENAME ifdefs.
2761 (add_section_rename): Delete. Inlined into...
2762 (build_section_rename): ...here. Use xstrdup instead of strdup.
2763 (xtensa_section_rename): Drop "const" from argument and return types.
2764 (md_show_usage): Indent to match show_usage().
2765 * config/tc-xtensa.h: Remove XTENSA_SECTION_RENAME ifdefs.
2766 (tc_canonicalize_section_name): Define.
2767 (md_elf_section_rename): Remove unused macro.
2768 * doc/as.texinfo (Overview): Document Xtensa --rename-section option.
2769 * doc/c-xtensa.texi (Xtensa Options): Likewise.
2770 (Frame Directive): Delete.
2772 2004-11-04 Daniel Jacobowitz <dan@debian.org>
2774 * configure.in: Remove arm-*-oabi and thumb-*-oabi.
2775 * config/tc-arm.c (target_oabi): Delete.
2776 (md_apply_fix3, elf32_arm_target_format): Remove target_oabi checks.
2777 (arm_opts): Remove moabi.
2778 * doc/as.texinfo (Overview): Remove documentation of -moabi.
2779 * doc/c-arm.texi (ARM Options): Likewise.
2780 * configure: Regenerated.
2782 2004-11-04 Hans-Peter Nilsson <hp@axis.com>
2784 * configure.in (crisv32): Recognize. AC_DEFINE_UNQUOTED
2785 DEFAULT_CRIS_ARCH. Handle crisv32-*-linux-gnu* like
2786 cris-*-linux-gnu* and crisv32-*-* like cris-*-*.
2787 * configure: Regenerate.
2788 * config/tc-cris.c (enum cris_archs): New.
2789 (cris_mach, cris_arch_from_string, s_cris_arch, get_sup_reg)
2790 (cris_insn_ver_valid_for_arch): New functions.
2791 (DEFAULT_CRIS_ARCH): New macro, default to cris_any_v0_v10.
2792 (cris_arch): New variable.
2793 (md_pseudo_table): New pseudo .arch.
2794 (err_for_dangerous_mul_placement): Initialize according to
2795 DEFAULT_CRIS_ARCH.
2796 (STATE_COND_BRANCH): Renamed from STATE_CONDITIONAL_BRANCH.
2797 All users changed.
2798 (STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON)
2799 (STATE_ABS_BRANCH_V32, STATE_LAPC, BRANCH_BF_V32, BRANCH_BB_V32)
2800 (BRANCH_WF_V32, BRANCH_WB_V32): New.
2801 (BRANCH_BF, BRANCH_BB, BRANCH_WF, BRANCH_WB): Don't undef after
2802 use in md_cris_relax_table.
2803 (md_cris_relax_table): Add entries for STATE_COND_BRANCH_V32,
2804 STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
2805 Update and improve head comment.
2806 (OPTION_PIC): Define in terms of previous option, OPTION_US.
2807 (OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): Similar.
2808 (OPTION_ARCH): New.
2809 (md_longopts): New option --march=...
2810 (cris_any_v0_v10_long_jump_size, crisv32_long_jump_size): New
2811 macros.
2812 (md_long_jump_size): Initialize in terms of DEFAULT_CRIS_ARCH.
2813 (HANDLE_RELAXABLE): New macro.
2814 (md_estimate_size_before_relax): Use HANDLE_RELAXABLE for common
2815 cases. Check for weak symbols and assume not relaxable. Handle
2816 STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON,
2817 STATE_ABS_BRANCH_V32, STATE_LAPC. Use new variable symbolP, not
2818 fragP->fr_symbol.
2819 (md_convert_frag): Handle STATE_COND_BRANCH_V32,
2820 STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
2821 (cris_create_short_jump): Adjust for CRISv32.
2822 (cris_relax_frag): Handle new states.
2823 (md_create_long_jump): Ditto. Emit error for common_v10_v32.
2824 (md_begin): Define symbols "..asm.arch.cris.v32",
2825 "..asm.arch.cris.v10", "..asm.arch.cris.common_v10_v32" and
2826 "..asm.arch.cris.any_v0_v10". Use cris_insn_ver_valid_for_arch
2827 when entering opcode table entry points.
2828 (md_assemble): Adjust branch handling for CRISv32. Handle LAPC
2829 relaxation. In fix_new_exp call for main insn, pass 1 for pcrel
2830 parameter for 8, 16 and 32-bit pc-relative insns and LAPC.
2831 (cris_process_instruction): Initialize out_insnp->insn_type to
2832 CRIS_INSN_NONE, not CRIS_INSN_NORMAL.
2833 <case ']', '[', 'A', 'd', 'Q', 'N', 'n', 'Y', 'U', 'u', 'T'>: New
2834 cases.
2835 <case 'm'>: Check that modified_char == '.'.
2836 <invalid operands>: Consume the rest of the line.
2837 When operands don't match, skip over subsequent insns with
2838 non-matching version specifier but same mnemonic.
2839 <immediate constant, case SIZE_SPEC_REG>: Immediate operands for
2840 special registers in CRISv32 are always 32 bit long.
2841 <immediate constant, case SIZE_FIELD_SIGNED, SIZE_FIELD_UNSIGNED>:
2842 New cases.
2843 (get_gen_reg): Only recognize "PC" when followed by "+]" for v32
2844 and compatible. Recognize "ACR" for v32, unless followed by "+".
2845 (get_spec_reg): Consider cris_arch when looking up register.
2846 (get_autoinc_prefix_or_indir_op): Don't recognize assignment for
2847 v32 or compatible.
2848 (get_3op_or_dip_prefix_op): Check for ']' after seeing '[rN+'.
2849 (cris_get_expression): Restore input_line_pointer if failing "early".
2850 (get_flags): Consider cris_arch and recognize flags accordingly.
2851 (branch_disp): Adjust for CRISv32.
2852 (gen_cond_branch_32): Similar. Emit error for common_v10_v32.
2853 (cris_number_to_imm): Use as_bad_where, not as_bad. Remove
2854 related FIXME. Don't insist on BFD_RELOC_32_PCREL fixup to be
2855 resolved. Don't enter zeros in object file for
2856 BFD_RELOC_32_PCREL.
2857 <case BFD_RELOC_CRIS_LAPCQ_OFFSET, BFD_RELOC_CRIS_SIGNED_16>
2858 <case BFD_RELOC_CRIS_SIGNED_8>: New case.
2859 (md_parse_option): Break out "return 1".
2860 <OPTION_ARCH> New case.
2861 (tc_gen_reloc): <case BFD_RELOC_CRIS_LAPCQ_OFFSET>
2862 <case BFD_RELOC_CRIS_SIGNED_16, BFD_RELOC_CRIS_SIGNED_8>
2863 <case BFD_RELOC_CRIS_UNSIGNED_8, BFD_RELOC_CRIS_UNSIGNED_16>
2864 <case BFD_RELOC_32_PCREL>: New cases.
2865 Addends for non-zero fx_pcrel are too in fx_offset.
2866 (md_show_usage): Show --march=<arch>.
2867 (md_apply_fix3): Adjust val for BFD_RELOC_CRIS_LAPCQ_OFFSET.
2868 (md_pcrel_from): BFD_RELOC_CRIS_LAPCQ_OFFSET is PC-relative too.
2869 (s_syntax) <struct syntaxes>: Properly constify member operand.
2870 * config/tc-cris.h (TARGET_MACH): Define.
2871 (cris_mach): Declare.
2872 * doc/as.texinfo (Overview) <CRIS>: Add --march=...
2873 * doc/c-cris.texi (CRIS-Symbols): New node for built-in symbols.
2874 (CRIS-Opts): Document --march=...
2875 (CRIS-Pseudos): Document .arch.
2877 2004-11-04 Jan Beulich <jbeulich@novell.com>
2879 * config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
2880 intel syntax and no register prefix, allow $ in symbol names when
2881 intel syntax.
2882 (set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
2883 (intel_float_operand): Add fourth return value indicating math control
2884 operations. Make classification more precise.
2885 (md_assemble): Complain if memory operand of mov[sz]x has no size
2886 specified.
2887 (parse_insn): Translate word operands to floating point instructions
2888 operating on integers as well as control instructions to short ones
2889 as expected by AT&T syntax. Translate 'd' suffix to short one only for
2890 floating point instructions operating on non-integer operands.
2891 (match_template): Remove fldcw special case. Adjust q-suffix handling
2892 to permit it on fild/fistp/fisttp in AT&T mode.
2893 (process_suffix): Don't guess DefaultSize insns' suffix from
2894 stackop_size for certain floating point control instructions. Guess
2895 suffix for branch and [ls][gi]dt based on flag_code. Split error
2896 messages for Intel and AT&T syntax, and make the condition more strict
2897 for the former. Adjust suppressing of generation of operand size
2898 overrides.
2899 (intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
2900 OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
2901 more error checking.
2902 * config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
2903 SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
2905 2004-11-03 Hans-Peter Nilsson <hp@axis.com>
2907 * symbols.c (colon) [!WORKING_DOT_WORD]: Don't declare
2908 md_short_jump_size, md_long_jump_size.
2909 * write.c [!WORKING_DOT_WORD]: Ditto.
2910 * tc.h [!WORKING_DOT_WORD]: Declare them here. Drop const
2911 qualifier.
2912 * config/tc-cris.h (md_short_jump_size, md_long_jump_size): Don't
2913 declare.
2914 * config/tc-cris.c (md_short_jump_size, md_long_jump_size): Drop
2915 const qualifier in these definitions.
2916 * config/tc-i370.c, config/tc-m68k.c, config/tc-pdp11.c,
2917 config/tc-s390.c, config/tc-tahoe.c, config/tc-vax.c: Ditto.
2919 2004-11-02 Nick Clifton <nickc@redhat.com>
2921 * dwarf2dbg.c (dwarf2_finish): Check for the existence of a file
2922 table before deciding to produce a .debug_line section to match up
2923 with a user provided .debug_info section.
2925 2004-10-28 Tomer Levi <Tomer.Levi@nsc.com>
2927 * config/tc-crx.c (getreg_image): Bug fix, a return value was
2928 mistakenly omitted from CRX_C_REGTYPE and CRX_CS_REGTYPE cases.
2930 2004-10-27 Tomer Levi <Tomer.Levi@nsc.com>
2932 * config/tc-crx.c: Remove global variable 'post_inc_mode'.
2933 (get_flags): New function.
2934 (get_number_of_bits): Edit comments, update numeric values to
2935 supported sizes.
2936 (process_label_constant): Don't support the colon
2937 format (SYMBOL:[s|m|l]).
2938 (set_cons_rparams): Support argument type 'arg_rbase'.
2939 (get_operandtype): Bug fix in 'rbase' operand type parsing.
2940 (handle_LoadStor): Bug fix, first handle post-increment mode.
2941 (getreg_image): Remove redundant code, update according to latest
2942 CRX spec.
2943 (print_constant): Bug fix relate to 3-word instructions.
2944 (assemble_insn): Bug fix, when matching instructions, verify also
2945 instruction type (not only mnemonic).
2946 Add various error checking.
2947 (preprocess_reglist): Support HI/LO and user registers.
2949 2004-10-25 David Mosberger-Tang <davidm@hpl.hp.com>
2951 * config/tc-ia64.c (fixup_unw_records): Don't let the "t" value
2952 in an epilogue directive go negative.
2954 2004-10-25 H.J. Lu <hongjiu.lu@intel.com>
2956 PR 474
2957 * config/tc-ia64.c (emit_one_bundle): Decrement md.num_slots_in_use
2958 after reporting template error during manual bundling. Reported
2959 by Michael Dupont, michaelx.dupont@intel.com.
2961 2004-10-25 Daniel Jacobowitz <dan@debian.org>
2963 * Makefile.am: Run dep-am.
2964 * aclocal.m4: Regenerate with automake 1.9.2.
2965 * Makefile.in: Regenerate with automake 1.9.2.
2966 * doc/Makefile.in: Likewise.
2968 * config/tc-arm.c: Include "dw2gencfi.h".
2969 (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
2970 New functions.
2971 * config/tc-arm.h (TARGET_USE_CFIPOP, DWARF2_DEFAULT_RETURN_COLUMN)
2972 (DWARF2_CIE_DATA_ALIGNMENT, tc_regname_to_dw2regnum)
2973 (tc_cfi_frame_initial_instructions): Define.
2974 (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
2975 Add prototypes.
2977 2004-10-21 Tomer Levi <Tomer.Levi@nsc.com>
2979 * config/tc-crx.c (assemble_insn): Check unsigned immediate
2980 operands validity.
2981 Update coprocessor id to be unsigned immediate.
2983 2004-10-18 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
2985 * config/tc-i386.c (O_secrel): Delete.
2986 (tc_pe_dwarf2_emit_offset): New function.
2987 * config/tc-i386.h (O_secrel): Define as O_md1.
2988 (TC_DWARF2_EMIT_OFFSET): Define.
2990 2004-10-18 Nick Clifton <nickc@redhat.com>
2992 * config/tc-xstormy16.c (xstormy16_cons_fix_new): Accept and
2993 ignore @fptr() directives for 4-byte fixups.
2995 2004-10-15 Alan Modra <amodra@bigpond.net.au>
2997 * Makefile.am: Run "make dep-am"
2998 * Makefile.in: Regenerate.
3000 2004-10-14 Bob Wilson <bob.wilson@acm.org>
3002 * doc/c-xtensa.texi (Xtensa Options, Absolute Literals Directive):
3003 Remove comments about placement of literal pools.
3004 (Literal Directive): Update description of literal placement.
3005 (Literal Prefix Directive): Remove statement that this does not apply
3006 to absolute-mode literals. Describe new section naming scheme.
3008 2004-10-12 Bob Wilson <bob.wilson@acm.org>
3010 * config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq.
3011 (is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode,
3012 is_windowed_return_opcode): Delete.
3013 (xtensa_frob_label): Use get_subseg_target_freq.
3014 (md_assemble): Inline call to is_entry_opcode.
3015 (xtensa_handle_align): Inline call to get_frag_is_literal.
3016 (relaxation_requirements): Inline call to is_jx_opcode.
3017 (emit_single_op): Inline call to is_movi_opcode.
3018 (xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn,
3019 get_frag_is_no_transform, is_entry_opcode, and
3020 set_frag_is_specific_opcode. Use get_subseg_total_freq.
3021 (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags,
3022 xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed):
3023 Inline calls to get_frag_is_no_transform.
3024 (next_instrs_are_b_retw): Inline call to is_windowed_return_opcode.
3025 (xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and
3026 get_frag_is_no_transform.
3027 (convert_frag_immed_finish_loop): Inline calls to get_expression_value
3028 and set_frag_is_no_transform.
3029 (get_expression_value): Delete.
3030 (subseg_map struct): Rename cur_total_freq to total_freq. Rename
3031 cur_target_freq to target_freq.
3032 (get_subseg_info): Split out code to create a new map entry into ...
3033 (add_subseg_info): ... this new function.
3034 (get_last_insn_flags): Check if get_subseg_info succeeded.
3035 (set_last_insn_flags): Call add_subseg_info if needed.
3036 (get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New.
3037 (xtensa_reorder_segments): Compute last_sec while counting sections.
3038 Remove call to get_last_sec.
3039 (get_last_sec): Delete.
3040 (cache_literal_section): Inline call to retrieve_literal_seg and its
3041 callees, seg_present and add_seg_list.
3042 (retrieve_literal_seg, seg_present, add_seg_list): Delete.
3043 (get_frag_is_insn, get_frag_is_no_transform,
3044 set_frag_is_specific_opcode, set_frag_is_no_transform): Delete.
3045 * config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15.
3047 2004-10-12 Bob Wilson <bob.wilson@acm.org>
3049 * config/tc-xtensa.c: Use ISO C90 formatting.
3050 * config/tc-xtensa.h: Likewise.
3051 * config/xtensa-istack.h: Likewise.
3052 * config/xtensa-relax.c: Likewise.
3053 * config/xtensa-relax.h: Likewise.
3055 2004-10-12 Paul Brook <paul@codesourcery.com>
3057 * config/tc-arm.c (md_begin): Change EF_ARM_EABI_VER3 to
3058 EF_ARM_EABI_VER4.
3059 (arm_eabis): Ditto.
3060 * doc/c-arm.texi: Document that we actually support -meabi=4, not
3061 -meabi=3.
3063 2004-10-08 Bob Wilson <bob.wilson@acm.org>
3065 * doc/as.texinfo (VTableEntry, VTableInherit): Add "directive" to index
3066 entries.
3067 (Acknowledgements): Use "GAS" instead of AS variable.
3069 2004-10-08 Daniel Jacobowitz <dan@debian.org>
3071 * config/tc-i386.c: Include "elf/x86-64.h".
3072 (i386_elf_section_type): New function.
3073 * config/tc-i386.h (md_elf_section_type): Define.
3074 (i386_elf_section_type): New prototype.
3076 2004-10-08 Linus Nielsen Feltzing <linus@haxx.se>
3078 * config/m68k-parse.h (enum m68k_register): New control register,
3079 MBAR2 (for MCF5249)
3080 * config/tc-m68k.c: Correct control register set for MCF5249.
3082 2004-10-07 Bob Wilson <bob.wilson@acm.org>
3083 Sterling Augustine <sterling@tensilica.com>
3085 * config/tc-xtensa.c (absolute_literals_supported): New global flag.
3086 (UNREACHABLE_MAX_WIDTH): Define.
3087 (XTENSA_FETCH_WIDTH): Delete.
3088 (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
3089 prefer_const16, prefer_l32r): New global variables.
3090 (LIT4_SECTION_NAME): Define.
3091 (lit4_state struct): Add lit4_seg_name and lit4_seg fields.
3092 (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
3093 (frag_flags struct): New.
3094 (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field.
3095 (subseg_map struct): Add cur_total_freq and cur_target_freq fields.
3096 (bitfield, bit_is_set, set_bit, clear_bit): Define.
3097 (MAX_FORMATS): Define.
3098 (op_placement_info struct, op_placement_table): New.
3099 (O_pltrel, O_hi16, O_lo16): Define.
3100 (directiveE enum): Rename directive_generics to directive_transform.
3101 Delete directive_relax. Add directive_schedule,
3102 directive_absolute_literals, and directive_last_directive.
3103 (directive_info): Rename "generics" to "transform". Delete "relax".
3104 Add "schedule" and "absolute-literals".
3105 (directive_state): Adjust entries to match changes in directive_info.
3106 (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
3107 (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
3108 xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
3109 (xtensa_j_opcode, xtensa_rsr_opcode): Delete.
3110 (align_only_targets, software_a0_b_retw_interlock,
3111 software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
3112 software_avoid_short_loop, software_avoid_close_loop_end,
3113 software_avoid_all_short_loops, specific_opcode): Delete.
3114 (warn_unaligned_branch_targets): New.
3115 (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
3116 workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
3117 (option_[no_]link_relax, option_[no_]transform,
3118 option_[no_]absolute_literals, option_warn_unaligned_targets,
3119 option_prefer_l32r, option_prefer_const16, option_target_hardware):
3120 New enum values.
3121 (option_[no_]align_only_targets, option_literal_section_name,
3122 option_text_section_name, option_data_section_name,
3123 option_bss_section_name, option_eb, option_el): Delete.
3124 (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
3125 warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
3126 and target-hardware. Delete entries for [no-]target-align-only,
3127 literal-section-name, text-section-name, data-section-name, and
3128 bss-section-name.
3129 (md_parse_option): Handle new options and remove old ones. Accept but
3130 ignore [no-]density options. Warn for [no-]generics and [no-]relax
3131 and treat them as [no-]transform.
3132 (md_show_usage): Add new options and remove old ones.
3133 (xtensa_setup_hw_workarounds): New.
3134 (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add
3135 "long", "short", "loc" and "frequency" entries.
3136 (use_generics): Rename to ...
3137 (use_transform): ... this function. Add past_xtensa_end check.
3138 (use_longcalls): Add past_xtensa_end check.
3139 (code_density_available, can_relax): Delete.
3140 (do_align_targets): New.
3141 (get_directive): Accept dashes in directive names. Warn about
3142 [no-]generics and [no-]relax directives and treat them as
3143 [no-]transform.
3144 (xtensa_begin_directive): Call md_flush_pending_output only for some
3145 directives. Check for directives inside instruction bundles. Warn
3146 about deprecated ".begin literal" usage. Warn and ignore [no-]density
3147 directives. Handle new directives. Check generating_literals flag
3148 for literal_prefix.
3149 (xtensa_end_directive): Check for directives inside instruction
3150 bundles. Warn and ignore [no-]density directives. Handle new
3151 directives. Call xtensa_set_frag_assembly_state.
3152 (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
3153 xtensa_dwarf2_emit_insn): New.
3154 (xtensa_literal_position): Call md_flush_pending_output. Do not check
3155 use_literal_section flag.
3156 (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute
3157 literals. Use xtensa_elf_cons to parse the expression.
3158 (xtensa_literal_prefix): Do not check use_literal_section. Support
3159 ".lit4" sections for absolute literals. Change prefix convention to
3160 replace ".text" (or ".t" in a linkonce section). No need to call
3161 subseg_set.
3162 (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
3163 (expression_end): Handle closing braces and colons.
3164 (PLT_SUFFIX, plt_suffix): Delete.
3165 (expression_maybe_register): Use new xtensa-isa.h functions. Use
3166 xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
3167 and O_hi16 expressions as well.
3168 (tokenize_arguments): Handle closing braces and colons.
3169 (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible"
3170 operands and paired register syntax.
3171 (get_invisible_operands): New.
3172 (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use
3173 new xtensa-isa.h functions.
3174 (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
3175 (xg_translate_idioms): Check if inside bundle. Use use_transform.
3176 Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density
3177 instructions. Use xtensa_translate_zero_immed.
3178 (operand_is_immed, operand_is_pcrel_label): Delete.
3179 (get_relaxable_immed): Use new xtensa-isa.h functions.
3180 (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h
3181 functions.
3182 (xtensa_print_insn_table, print_vliw_insn): New.
3183 (is_direct_call_opcode): Use new xtensa-isa.h functions.
3184 (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
3185 is_branch_or_jump_opcode): Delete.
3186 (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
3187 (opnum_to_reloc, reloc_to_opnum): Delete.
3188 (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
3189 xtensa-isa.h functions. Operate on one slot of an instruction.
3190 (xtensa_insnbuf_set_immediate_field, is_negatable_branch,
3191 xg_get_insn_size): Delete.
3192 (xg_get_build_instr_size): Use xg_get_single_size.
3193 (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
3194 xg_build_widen_table. Use xg_get_single_size.
3195 (xg_get_max_narrow_insn_size): Delete.
3196 (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
3197 xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use
3198 xg_get_single_size.
3199 (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and
3200 OP_OPERAND_LOW16U. Check xg_valid_literal_expression.
3201 (xg_expand_to_stack, xg_expand_narrow): Update calls to
3202 xg_build_widen_table. Use xg_get_single_size.
3203 (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to
3204 xg_check_operand.
3205 (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and
3206 treat weak symbols conservatively.
3207 (xg_check_operand): Use new xtensa-isa.h functions.
3208 (is_dnrange): Delete.
3209 (xg_assembly_relax): Inline previous calls to tinsn_copy.
3210 (xg_finish_frag): Specify separate relax states for the frag and slot0.
3211 (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
3212 xtensa-isa.h functions.
3213 (xg_instruction_matches_option_term, xg_instruction_matches_or_options,
3214 xg_instruction_matches_options): New.
3215 (xg_instruction_matches_rule): Handle O_register expressions. Call
3216 xg_instruction_matches_options.
3217 (transition_rule_cmp): New.
3218 (xg_instruction_match): Update call to xg_build_simplify_table.
3219 (xg_build_token_insn): Record loc fields.
3220 (xg_simplify_insn): Check is_specific_opcode field and
3221 density_supported flag.
3222 (xg_expand_assembly_insn): Skip checking code_density_available. Use
3223 new xtensa-isa.h functions. Call use_transform instead of can_relax.
3224 (xg_assemble_literal): Add error handling for O_big. Call
3225 record_alignment. Handle O_pltrel.
3226 (xg_valid_literal_expression): New.
3227 (xg_assemble_literal_space): Add slot parameter. Remove call to
3228 set_expr_symbol_offset. Add call to record_alignment. Update call to
3229 xg_finish_frag.
3230 (xg_emit_insn): Delete.
3231 (xg_emit_insn_to_buf): Add format parameter. Update calls to
3232 xg_add_opcode_fix and xtensa_insnbuf_to_chars.
3233 (xg_add_opcode_fix): Change opcode parameter to tinsn and add format
3234 and slot parameters. Handle new "alternate" relocations for absolute
3235 literals and CONST16 instructions. Check for bad uses of O_lo16 and
3236 O_hi16. Use new xtensa-isa.h functions.
3237 (xg_assemble_tokens): Delete.
3238 (is_register_writer): Use new xtensa-isa.h functions.
3239 (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
3240 old-style RSR from LCOUNT.
3241 (next_frag_opcode): Delete.
3242 (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
3243 update_next_frag_state): New.
3244 (update_next_frag_nop_state): Delete.
3245 (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
3246 (xtensa_mark_literal_pool_location): Check use_literal_section flag and
3247 the state of the absolute-literals directive. Add calls to
3248 record_alignment and xtensa_set_frag_assembly_state. Call
3249 xtensa_switch_to_non_abs_literal_fragment instead of
3250 xtensa_switch_to_literal_fragment.
3251 (build_nop): New.
3252 (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars.
3253 (get_expanded_loop_offset): Change check for undefined opcode to an
3254 assertion.
3255 (xtensa_set_frag_assembly_state, relaxable_section,
3256 xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
3257 xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
3258 (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1.
3259 Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes.
3260 Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
3261 (xtensa_init_fix_data): New.
3262 (xtensa_frob_label): Reset label symbol to the current frag. Check
3263 do_align_targets and generating_literals flag. Propagate frequency
3264 info to new alignment frag. Call xtensa_set_frag_assembly_state.
3265 (xtensa_unrecognized_line): New.
3266 (xtensa_flush_pending_output): Check if inside a bundle. Add a call
3267 to xtensa_set_frag_assembly_state.
3268 (error_reset_cur_vinsn): New.
3269 (md_assemble): Remove check for literal frag. Remove call to
3270 istack_init. Call use_transform instead of use_generics. Parse
3271 explicit instruction format specifiers. Move code for
3272 a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call
3273 error_reset_cur_vinsn on errors. Add call to get_invisible_operands.
3274 Add dwarf2_where call. Remote automatic alignment for ENTRY
3275 instructions. Move call to xtensa_clear_insn_labels to the end.
3276 Rearrange to handle bundles.
3277 (xtensa_cons_fix_new): Delete.
3278 (xtensa_handle_align): New.
3279 (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove
3280 assignment to is_no_density field.
3281 (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc
3282 instead of reloc_to_opnum. Handle "alternate" relocations.
3283 (xtensa_force_relocation, xtensa_check_inside_bundle,
3284 xtensa_elf_section_change_hook): New.
3285 (xtensa_symbol_new_hook): Delete.
3286 (xtensa_fix_adjustable): Check for difference of symbols with an
3287 offset. Check for external and weak symbols.
3288 (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
3289 (md_estimate_size_before_relax): Return expansion for the first slot.
3290 (tc_gen_reloc): Handle difference of symbols by producing
3291 XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
3292 into the output. Handle new XTENSA_SLOT*_OP relocs by storing the
3293 tentative values into the output when linkrelax is set.
3294 (XTENSA_PROP_SEC_NAME): Define.
3295 (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
3296 Create literal tables only if using literal sections. Create new
3297 property tables instead of old instruction tables. Check for unaligned
3298 branch targets and loops.
3299 (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
3300 new_resource_table, clear_resource_table, resize_resource_table,
3301 resources_available, reserve_resources, release_resources,
3302 opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
3303 resources_conflict, xg_find_narrowest_format, relaxation_requirements,
3304 bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
3305 (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end
3306 flag. Update checks for workaround options. Call
3307 xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
3308 (xtensa_cleanup_align_frags): Add special case for branch targets.
3309 Check for and mark unreachable frags.
3310 (xtensa_fix_target_frags): Remove use of align_only_targets flag.
3311 Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
3312 end of a zero-overhead loop body.
3313 (frag_can_negate_branch): Handle instructions with multiple slots.
3314 Use new xtensa-isa.h functions
3315 (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
3316 xtensa_mark_zcl_first_insns): New.
3317 (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
3318 transformations are disabled.
3319 (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle
3320 multislot instructions.
3321 (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
3322 Likewise. Also error if transformations are disabled.
3323 (unrelaxed_frag_max_size): New.
3324 (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
3325 xtensa-isa.h functions.
3326 (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
3327 xtensa_opcode_is_loop instead of is_loop_opcode.
3328 (get_text_align_power): Replace as_fatal with assertion.
3329 (get_text_align_fill_size): Iterate instead of using modulus when
3330 use_nops is false.
3331 (get_noop_aligned_address): Assert that this is for a machine-dependent
3332 RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop,
3333 xg_get_single_size, and frag_format_size.
3334 (get_widen_aligned_address): Rename to ...
3335 (get_aligned_diff): ... this function. Add max_diff parameter.
3336 Remove handling of rs_align/rs_align_code frags. Use
3337 next_frag_format_size, get_text_align_power, get_text_align_fill_size,
3338 next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff
3339 and pass it back to caller.
3340 (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new
3341 RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
3342 RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen.
3343 (relax_frag_text_align): Rename to ...
3344 (relax_frag_loop_align): ... this function. Assume loops can only be
3345 in the first slot of an instruction.
3346 (relax_frag_add_nop): Use assemble_nop instead of constructing an OR
3347 instruction. Remove call to frag_wane.
3348 (relax_frag_narrow): Rename to ...
3349 (relax_frag_for_align): ... this function. Extend to handle
3350 RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
3351 RELAX_NARROW for the first slot.
3352 (find_address_of_next_align_frag, bytes_to_stretch): New.
3353 (future_alignment_required): Use find_address_of_next_align_frag and
3354 bytes_to_stretch. Look ahead to subsequent frags to make smarter
3355 alignment decisions.
3356 (relax_frag_immed): Add format, slot, and estimate_only parameters.
3357 Check if transformations are enabled for b_j_loop_end workaround.
3358 Use new xtensa-isa.h functions and handle multislot instructions.
3359 Update call to xg_assembly_relax.
3360 (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
3361 RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
3362 frag types.
3363 (convert_frag_narrow): Add segP, format and slot parameters. Call
3364 convert_frag_immed for branch instructions. Adjust calls to
3365 tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use
3366 xg_get_single_size and xg_get_single_format.
3367 (convert_frag_fill_nop): New.
3368 (convert_frag_immed): Add format and slot parameters. Handle multislot
3369 instructions and use new xtensa-isa.h functions. Update calls to
3370 tinsn_immed_from_frag and xg_assembly_relax. Check if transformations
3371 enabled for b_j_loop_end workaround. Use build_nop instead of
3372 assemble_nop. Check is_specific_opcode flag. Check for unreachable
3373 frags. Use xg_get_single_size. Handle O_pltrel.
3374 (fix_new_exp_in_seg): Remove check for old plt flag.
3375 (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
3376 xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check
3377 for loop opcode to an assertion. Mark all frags up to the end of the
3378 loop as not transformable.
3379 (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
3380 (get_subseg_info): New.
3381 (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null
3382 check for dest_seg.
3383 (xtensa_switch_to_literal_fragment): Rewrite to handle absolute
3384 literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
3385 (xtensa_switch_to_non_abs_literal_fragment): New.
3386 (cache_literal_section): Add is_code parameter and pass it through to
3387 retrieve_literal_seg.
3388 (retrieve_literal_seg): Add is_code parameter and use it to set the
3389 flags on the literal section. Handle case where head parameter is 0.
3390 (get_frag_is_no_transform, set_frag_is_specific_opcode,
3391 set_frag_is_no_transform): New.
3392 (xtensa_create_property_segments): Add end_property_function parameter
3393 and pass it through to add_xt_block_frags. Call bfd_get_section_flags
3394 and skip SEC_DEBUGGING and !SEC_ALLOC sections.
3395 (xtensa_create_xproperty_segments, section_has_xproperty): New.
3396 (add_xt_block_frags): Add end_property_function parameter and call it
3397 if it is non-zero. Call xtensa_frag_flags_init.
3398 (xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
3399 get_frag_property_flags, frag_flags_to_number,
3400 xtensa_frag_flags_combinable, xt_block_aligned_size,
3401 xtensa_xt_block_combine, add_xt_prop_frags,
3402 init_op_placement_info_table, opcode_fits_format_slot,
3403 xg_get_single_size, xg_get_single_format): New.
3404 (istack_push): Inline call to tinsn_copy.
3405 (tinsn_copy): Delete.
3406 (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
3407 CONST16 opcodes. Handle O_big, O_illegal, and O_absent.
3408 (tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
3409 (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
3410 functions. Handle invisible operands.
3411 (tinsn_to_slotbuf): New.
3412 (tinsn_check_arguments): Use new xtensa-isa.h functions.
3413 (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn,
3414 vinsn_from_chars, and xg_free_vinsn.
3415 (tinsn_from_insnbuf): New.
3416 (tinsn_immed_from_frag): Add slot parameter and handle multislot
3417 instructions. Handle symbol differences.
3418 (get_num_stack_text_bytes): Use xg_get_single_size.
3419 (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
3420 xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
3421 get_expr_register, set_expr_symbol_offset_diff): New.
3422 * config/tc-xtensa.h (MAX_SLOTS): Define.
3423 (xtensa_relax_statesE): Move from tc-xtensa.c. Add
3424 RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
3425 RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
3426 RELAX_NONE types.
3427 (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
3428 (xtensa_frag_type struct): Add is_assembly_state_set,
3429 use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
3430 is_align, is_text_align, alignment, and is_first_loop_insn fields.
3431 Replace is_generics and is_relax fields by is_no_transform field.
3432 Delete is_text and is_longcalls fields. Change text_expansion and
3433 literal_expansion to arrays of MAX_SLOTS entries. Add arrays of
3434 per-slot information: literal_frags, slot_subtypes, slot_symbols,
3435 slot_sub_symbols, and slot_offsets. Add fr_prev field.
3436 (xtensa_fix_data struct): New.
3437 (xtensa_symfield_type struct): Delete plt field.
3438 (xtensa_block_info struct): Move definition to tc-xtensa.h. Add
3439 forward declaration here.
3440 (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec.
3441 (XTENSA_SECTION_RENAME): Undefine.
3442 (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
3443 tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
3444 HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
3445 (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
3446 (unit_num_copies_func, opcode_num_units_func,
3447 opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
3448 (resource_table struct): New.
3449 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
3450 (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
3451 literal_space, symbol, sub_symbol, offset, and literal_frag fields.
3452 (tinsn_copy): Delete prototype.
3453 (vliw_insn struct): New.
3454 * config/xtensa-relax.c (insn_pattern_struct): Add options field.
3455 (widen_spec_list): Add option conditions for density and boolean
3456 instructions. Add expansions using CONST16 and conditions for using
3457 CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for
3458 predicted branches.
3459 (simplify_spec_list): Add option conditions for density instructions.
3460 Add entry for NOP instruction.
3461 (append_transition): Add cmp function pointer parameter and use it to
3462 insert the new entry in order.
3463 (operand_function_LOW16U, operand_function_HI16U): New.
3464 (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
3465 OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
3466 (enter_opname, split_string): Use xstrdup instead of strdup.
3467 (init_insn_pattern): Initialize new options field.
3468 (clear_req_or_option_list, clear_req_option_list,
3469 clone_req_or_option_list, clone_req_option_list, parse_option_cond):
3470 New.
3471 (parse_insn_pattern): Parse option conditions.
3472 (transition_applies): New.
3473 (build_transition): Use new xtensa-isa.h functions. Fix incorrectly
3474 swapped last arguments in calls to append_constant_value_condition.
3475 Call clone_req_option_list. Add warning about invalid opcode.
3476 Handle LOW16U and HI16U function names.
3477 (build_transition_table): Add cmp parameter and use it in calls to
3478 append_transition. Use new xtensa-isa.h functions. Check
3479 transition_applies before adding entries.
3480 (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
3481 pass it through to build_transition_table.
3482 * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
3483 ReqOption, transition_cmp_fn): New types.
3484 (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
3485 (transition_rule struct): Add options field.
3486 * doc/as.texinfo (Overview): Update Xtensa options.
3487 * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
3488 --[no-]relax, and --[no-]generics options. Update descriptions of
3489 --text-section-literals and --[no-]longcalls. Add
3490 --[no-]absolute-literals and --[no-]transform.
3491 (Xtensa Syntax): Add description of syntax for FLIX instructions.
3492 Remove use of "generic" and "specific" terminology for opcodes.
3493 (Xtensa Registers): Generalize the syntax description to include
3494 user-defined register files.
3495 (Xtensa Automatic Alignment): Update.
3496 (Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
3497 (Xtensa Call Relaxation): Linker can now remove most of the overhead.
3498 (Xtensa Directives): Remove confusing rules about precedence.
3499 (Density Directive, Relax Directive): Delete.
3500 (Schedule Directive): New.
3501 (Generics Directive): Rename to ...
3502 (Transform Directive): ... this node.
3503 (Literal Directive): Update for absolute literals. Missing
3504 literal_position directive is now an error.
3505 (Literal Position Directive): Update for absolute literals.
3506 (Freeregs Directive): Delete.
3507 (Absolute Literals Directive): New.
3508 (Frame Directive): Minor editing.
3509 * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
3510 Update dependencies.
3511 * Makefile.in: Regenerate.
3513 2004-10-07 Richard Sandiford <rsandifo@redhat.com>
3515 * config/tc-mips.c (append_insn): Use fix_new rather than fix_new_exp
3516 to build the second and third fixups for a composite relocation.
3517 (macro_read_relocs): New function.
3518 (macro_build): Use it.
3519 (s_cpsetup): Pass all three composite relocation codes to macro_build.
3520 Simplify fragging code accordingly.
3521 (s_gpdword): Use fix_new rather than fix_new_exp for the second part
3522 of the composite relocation. Set fx_tcbit in both fixups.
3524 2004-10-07 Richard Sandiford <rsandifo@redhat.com>
3526 * config/tc-mips.c (append_insn): Set fx_tcbit for composite relocs.
3527 (md_apply_fix3): Don't treat composite relocs as done.
3529 2004-10-07 Jan Beulich <jbeulich@novell.com>
3531 * macro.c (macro_expand_body): When ELF, use .LL rather than LL as
3532 prefix for symbol names generated from the LOCAL macro directive.
3534 * dw2gencfi.c (select_cie_for_fde): When separating CIE out from
3535 FDE, treat a DW_CFA_remember_state as we do a DW_CFA_advance_loc.
3537 2004-10-07 Tomer Levi <Tomer.Levi@nsc.com>
3539 * config/tc-crx.c (preprocess_reglist): Handle Co-processor
3540 Special registers.
3541 (md_assemble): Add error checking for Co-Processor instructions.
3542 (get_cinv_parameters): Add 'b' option to invalidate the
3543 branch-target cache.
3545 2004-10-05 Paul Brook <paul@codesourcery.com>
3547 * config/tc-arm.c (unwind): New variable.
3548 (vfp_sp_encode_reg): New function.
3549 (vfp_sp_reg_required_here): Use it.
3550 (vfp_sp_reg_list, vfp_dp_reg_list): Remove.
3551 (vfp_parse_reg_list): New function.
3552 (s_arm_unwind_fnstart, s_arm_unwind_fnend, s_arm_unwind_cantunwind,
3553 s_arm_unwind_personality, s_arm_unwind_personalityindex,
3554 s_arm_unwind_handlerdata, s_arm_unwind_save, s_arm_unwind_movsp,
3555 s_arm_unwind_pad, s_arm_unwind_setfp, s_arm_unwind_raw): New
3556 functions.
3557 (md_pseudo_table): Add them.
3558 (do_vfp_reg2_from_sp2): Use vfp_parse_reg_list and vfp_sp_encode_reg.
3559 (do_vfp_sp2_from_reg2, vfp_sp_ldstm, vfp_dp_ldstm): Ditto.
3560 (set_section, add_unwind_adjustsp, flush_pending_unwind,
3561 finish_unwind_opcodes, start_unwind_section, create_unwind_entry,
3562 require_hashconst, add_unwind_opcode): New functions.
3563 * doc/c-arm.texi: Document unwinding opcodes.
3564 * NEWS: Mention the new feature.
3566 2004-10-04 Eric Christopher <echristo@redhat.com>
3568 * config/tc-mips.c (md_apply_fix3): Remove erroneous assert.
3570 2004-10-01 H.J. Lu <hongjiu.lu@intel.com>
3572 * config/tc-ppc.c (md_apply_fix3): Call S_SET_THREAD_LOCAL for
3573 TLS relocations.
3574 * config/tc-s390.c (md_apply_fix3): Likewise.
3575 * config/tc-sparc.c (md_apply_fix3): Likewise.
3577 2004-10-01 Paul Brook <paul@codesourcery.com>
3579 * config/tc-arm.c (arm_elf_section_type): New function.
3580 (arm_elf_change_section): Set section link for exidx sections.
3581 * config/tc-arm.h (arm_elf_section_type): Add prototype.
3582 (md_elf_section_type): Define.
3584 2004-10-01 Bill Farmer <Bill@the-farmers.freeserve.co.uk>
3586 * config/tc-pdp11.c (md_apply_fix3): Change to sign of the SOB
3587 instruction's offset.
3589 2004-10-01 Adam Nemet <anemet@lnxw.com>
3591 * (TARGET_FORMAT): Remove LynxOS COFF definition.
3593 2004-10-01 Ravi Ramaseshan <ravi.ramaseshan@codito.com>
3595 * config/tc-arc.c (tc_gen_reloc): Don't assume fixP->fx_addsy is an
3596 asymbol *, instead use symbol_get_bfdsym.
3598 2004-09-30 Linus Nielsen Feltzing <linus@haxx.se>
3600 * config/tc-m68k.c (select_control_regs): Add mcf5249.
3602 2004-09-30 Paul Brook <paul@codesourcery.com>
3604 * config/tc-arm.c (do_smi, do_nop): New functions.
3605 (insns): Add ARMv6ZK instructions.
3606 (md_apply_fix3): Handle BFD_RELOC_ARM_SMI.
3607 (tc_gen_reloc): Ditto.
3608 (arm_cpus): Add mpcore and arm1176.
3609 (arm_archs): Add armv6{k,z,zk}.
3610 * doc/c-arm.texi: Document new cores and architectures.
3612 2004-09-30 Nick Clifton <nickc@redhat.com>
3614 * config/tc-arm.c: Use ISO C90 formatting.
3616 2004-09-30 Vladimir Ivanov <vladitx@nucleusys.com>
3618 * config/tc-arm.c (mav_reg_required_here): Allow REG_TYPE_CN
3619 as alternative when REG_TYPE_MVF, REG_TYPE_MVD, REG_TYPE_MVFX or
3620 REG_TYPE_MVDX is expected.
3622 2004-09-29 Marc Bevand <m.bevand@gmail.com>
3624 * doc/c-i386.texi (i386-Mnemonics): Fix typo.
3626 2004-09-21 James E Wilson <wilson@specifixinc.com>
3628 * config/tc-ia64.c (ENCODED_PSP_OFFSET): New.
3629 (output_rp_psprel, output_pfs_psprel, output_preds_psprel,
3630 output_spill_base, output_unat_psprel, output_lc_psprel,
3631 output_fpsr_psprel, output_priunat_psprel, output_bsp_psprel,
3632 output_bsprestore_psprel, output_rnat_psprel, output_spill_psprel,
3633 output_spill_psprel_p): Use it.
3635 2004-09-20 Tomer Levi <Tomer.Levi@nsc.com>
3637 * config/tc-crx.c (handle_LoadStor): New function.
3638 Handle load/stor unique instructions before parsing.
3640 2004-09-17 Paul Brook <paul@codesourcery.com>
3642 * config/tc-arm.c (s_arm_rel31): New funciton.
3643 (md_pseudo_table): Add .rel31.
3644 (md_apply_fix3): Handle BFD_RELOC_ARM_TARGET2,
3645 BFD_RELOC_32_PCREL and BFD_RELOC_ARM_PREL31.
3646 (tc_gen_reloc): Handle BFD_RELOC_ARM_PREL31 and BFD_RELOC_ARM_TARGET2.
3647 (arm_fix_adjustable): Return 0 for BFD_RELOC_ARM_TARGET2.
3648 (arm_parse_reloc): Add (target2).
3650 2004-09-17 Alan Modra <amodra@bigpond.net.au>
3652 * Makefile.am: Run "make dep-am".
3653 * Makefile.in: Regenerate.
3654 * aclocal.m4: Regenerate.
3655 * configure: Regenerate.
3656 * doc/Makefile.in: Regenerate.
3657 * po/POTFILES.in: Regenerate.
3658 * po/gas.pot: Regenerate.
3660 2004-09-14 Hideki IWAMOTO <h-iwamoto@kit.hi-ho.ne.jp>
3662 * config/tc-mmix.c [!LLONG_MIN]: Correct #elsif to #elif.
3663 [!LLONG_MAX]: Ditto.
3665 2004-09-13 Paul Brook <paul@codesourcery.com>
3667 * config/tc-arm.c: Rename RELABS to TARGET1.
3669 2004-09-13 Alan Modra <amodra@bigpond.net.au>
3671 * messages.c (as_internal_value_out_of_range): Cast values passed
3672 to as_bad_where or as_warn_where to proper type.
3674 2004-09-11 Theodore A. Roth <troth@openavr.org>
3676 * config/tc-avr.c: Add support for
3677 atmega48, atmega88, atmega168, attiny13, attiny2313, at90can128.
3679 2004-09-09 Alan Modra <amodra@bigpond.net.au>
3681 * dw2gencfi.c (select_cie_for_fde): When separating CIE out
3682 from FDE, treat a CFI_escape as we do a DW_CFA_advance_loc.
3684 2004-09-08 Paul Brook <paul@codesourcery.com>
3686 * config/obj-elf.c (obj_elf_section_type): Handle init_array,
3687 fini_array and preinit_array section types.
3688 * config/tc-ia64.c (ia64_elf_section_type): Remove init_array
3689 and fini_array.
3690 * doc/as.texinfo: Document extra section types.
3692 2004-09-02 Mark Mitchell <mark@codesourcery.com>
3694 * Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
3695 * Makefile.in: Regenerated.
3696 * configure.in: Set em for arm*-*-symbianelf*.
3697 * configure: Regenerated.
3698 * config/tc-arm.c (elf32_arm_target_format): Use Symbian target
3699 vectors when appropriate.
3700 * config/te-symbian.h: New file.
3702 2004-09-03 Tomer Levi <Tomer.Levi@nsc.com>
3704 * config/tc-crx.c (gettrap): Exception vector can be case
3705 insensitive.
3706 (process_label_constant): Fix a 32-bit displacement bug in branch
3707 instructions.
3708 (get_operandtype) : Bug fix, wrong operand was used.
3709 (process_label_constant): Initialize relocation type to
3710 BFD_RELOC_NONE
3712 2004-09-01 Richard Earnshaw < reanrsha@arm.com>
3714 * tc-arm.c (arm_cpus, arm_fpus): Allow <cpu>-s as well as <cpu>s
3715 for synthesizable cores.
3717 * doc/c-arm.texi (ARM Options): Document canonical names of CPUs.
3719 2004-08-25 Dmitry Diky <diwil@spec.ru>
3721 * config/tc-msp430.c: Clean-up the code.
3722 (md_relax_table): New relax table.
3723 (mcu_types): Sort MCU types.
3724 (md_pseudo_table): Add .profiler pseudo handler.
3725 (pow2value): New function.
3726 (msp430_profiler): New function.
3727 (msp430_operands): Add new insns handlers.
3728 (msp430_srcoperand): Add register operand handler, allow complex
3729 expressions.
3730 (md_estimate_size_before_relax): Rewritten.
3731 (md_convert_frag): Rewritten.
3732 (msp430_relax_frag): New function.
3733 * config/tc-msp430.h (md_relax_frag): define macro
3734 * doc/c-msp430.texi: Update information.
3736 2004-08-24 Nick Clifton <nickc@redhat.com>
3738 * as.c (std_shortopts): Allow -g to take an optional argument.
3739 (parse_args): Pass any switch starting with -g on to the backend
3740 for parsing.
3742 2004-08-18 Mark Mitchell <mark@codesourcery.com>
3744 * configure.in (arm*-*-symbianelf*): New target.
3745 (arm*-*-eabi*): Likewise.
3746 * configure: Regenerated.
3748 2004-08-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3749 * config/tc-mips.c (append_insn): Handle delay slots in branch likely
3750 correctly.
3752 2004-08-18 Jakub Jelinek <jakub@redhat.com>
3754 * config/tc-ia64.c (start_unwind_section): Add linkonce_empty
3755 argument, don't do anything if current section is not
3756 .gnu.linkonce.t.* and linkonce_empty is set.
3757 (generate_unwind_image, dot_endp): Adjust callers, call
3758 start_unwind_section (*, 1) if nothing will be put into the
3759 section.
3761 2004-08-17 Nick Clifton <nickc@redhat.com>
3763 * as.c (MD_DEBUG_FORMAT_SELECTOR): Provide default definition.
3764 (show_usage): Add -g.
3765 (std_longopts): Add --gen-debug. Alpha sort the table.
3766 (parse_args): Print an error message if a switch is not handled.
3767 Handle the -g switch, calling md_debug_format_selector() if
3768 necessary.
3769 * NEWS: Mention new feature.
3770 * doc/as.texinfo: Document new switch.
3771 * doc/internals.texi: Document behaviour of md_parse_option.
3773 * config/tc-arm.c (md_parse_option): Do not issue an error message
3774 if the switch is not recognised.
3775 * config/tc-m68k.c (md_parse_option): Likewise.
3776 * config/tc-pdp11.c (md_parse_option): Likewise.
3777 * config/tc-v850.c (md_parse_option): Likewise.
3779 * as.h: Fix up formatting.
3780 * tc.h: Likewise.
3782 2004-08-16 Nick Clifton <nickc@redhat.com>
3784 * macro.c (macro_set_alternate): Use ISO C90 formatting.
3786 * configure.in: Sort architecture based tables alphabetically.
3787 * configure: Regenerate.
3789 2004-08-16 Alan Modra <amodra@bigpond.net.au>
3791 * config/tc-ppc.c (tc_ppc_regname_to_dw2regnum <regnames>): Replace
3792 { "cc", 68 }, with { "cr", 70 }.
3794 2004-08-13 Jan Beulich <jbeulich@novell.com>
3795 Nick Clifton <nickc@redhat.com>
3797 * as.c: Add and handle new --alternate command line option.
3798 * macro.c (macro_set_alternate): New.
3799 * macro.h (macro_set_alternate): Declare.
3800 * read.c: Add and handle new .altmacro and .noaltmacro directives.
3801 * doc/as.texinfo: Document new command line option and pseudo-ops
3802 as well as insert documentation originating from gasp about
3803 alternate macro syntax.
3804 * NEWS: Mention new command line option and pseudo-ops.
3806 2004-08-10 Mark Mitchell <mark@codesourcery.com>
3808 * expr.c (operand): Handle the "~", "-", and "!" operators applied
3809 to bignums.
3811 2004-08-06 Paul Brook <paul@codesourcery.com>
3813 * config/tc-arm.c (md_apply_fix3, tc_gen_reloc, arm_parse_reloc):
3814 Handle new relocations.
3815 * include/elf/arm.h (elf_arm_reloc_type): Add new EABI relocations.
3817 2004-08-05 Bob Wilson <bob.wilson@acm.org>
3819 * write.c (relax_segment): Use was_address instead of address when
3820 setting fr_fix field for align frag due to backwards .org.
3822 2004-07-29 Alexandre Oliva <aoliva@redhat.com>
3824 Introduce SH2a support.
3825 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
3826 * config/tc-sh.c (get_specific): Change arch_sh2a_up to
3827 arch_sh2a_nofpu_up.
3828 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
3829 * config/tc-sh.c (md_parse_option): Add sh2a-nofpu ISA handling.
3830 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
3831 * config/tc-sh.c (sh_elf_final_processing): Move sh2a recognition
3832 to end of conditional expression.
3833 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
3834 * config/tc-sh.c: Add sh2a-nofpu support.
3835 2003-12-29 DJ Delorie <dj@redhat.com>
3836 * tc-sh.c: Add sh2a support.
3837 (parse_reg): Add tbr.
3838 (parse_at): Support @@(disp,tbr).
3839 (get_specific): Support sh2a opcodes.
3840 (insert4): New, for 4 byte relocs.
3841 (build_Mytes): Support sh2a opcodes.
3842 (md_apply_fix3_Mytes): Support sh2a opcodes.
3843 2003-12-02 Michael Snyder <msnyder@redhat.com>
3844 * config/tc-sh.c (md_parse_option): Handle sh2a.
3845 (sh_elf_final_processing): Ditto.
3847 2004-07-27 Jason Thorpe <thorpej@wasabisystems.com>
3849 * config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
3850 for TE_NetBSD.
3852 2004-07-27 Alan Modra <amodra@bigpond.net.au>
3854 * config/tc-ppc.c (ppc_frob_file_before_adjust): Warn if .toc too big.
3855 (ppc_arch): Expand comment.
3857 2004-07-27 Tomer Levi <Tomer.Levi@nsc.com>
3859 * config/tc-crx.c: Support evaluating the difference between two
3860 symbols.
3861 * config/tc-crx.h: Likewise.
3863 2004-07-26 H.J. Lu <hongjiu.lu@intel.com>
3865 * config/tc-ia64.c (start_unwind_section): Set the linked-to
3866 section.
3867 (ia64_elf_section_change_hook): Set the linked-to section for
3868 SHT_IA_64_UNWIND.
3870 2004-07-26 Dmitry Diky <diwil@spec.ru>
3872 * config/tc-msp430.c: Add new subtargets: msp430x1610,
3873 msp430x1611, msp430x1612, msp430x415, msp430x417, msp430xG437,
3874 msp430xG438, msp430xG439.
3876 2004-07-25 Daniel Jacobowitz <dan@debian.org>
3878 * doc/as.texinfo (Section, PushSection): Correct documentation
3879 for ELF.
3881 2004-07-21 Jan Beulich <jbeulich@novell.com>
3883 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
3884 permissible for the selected instruction suffix.
3885 (match_template): Don't permit 64-bit general purpose operands in
3886 32-bit mode.
3887 (finalize_imm): Permit 64-bit immediates.
3888 (build_modrm_byte): Don't treat 32-bit addressing in 64-bit mode
3889 specially except for the width of the used base and/or index
3890 registers. For 32-bit displacements, use sign-extended
3891 relocations only when using 64-bit addressing.
3892 Force zero displacement on rip-relative addressing when there is
3893 no other displacement.
3894 (i386_index_check): Don't treat 32-bit addressing in 64-bit mode
3895 specially except for the width of the used base and/or index
3896 registers.
3897 (parse_register): Disallow Reg64 registers in 32-bit mode.
3899 * config/tc-i386.c: For DefaultSize instructions, don't guess a 'q'
3900 suffix if the instruction doesn't support it.
3902 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org>
3904 * config/tc-mips.c (append_insn): Handle constant expressions with
3905 no associated relocation.
3906 (mips_ip): Cancel the expression after use for the Q format
3907 specifier.
3908 (parse_relocation): Return no relocation for unsupported
3909 operators.
3910 (my_getSmallExpression): Return no relocation if no relocation
3911 operators are used.
3913 2004-07-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3915 * config/obj-som.c (adjust_stab_sections): Add prototype.
3916 (obj_som_compiler, obj_som_version, obj_som_copyright,
3917 adjust_stab_sections): Add ATTRIBUTE_UNUSED to unused arguments.
3918 * config/tc-hppa.c (update_subspace): Likewise.
3919 (is_defined_subspace): Amplify comment.
3920 * config/obj-som.h (som_frob_file): Add prototype.
3922 2004-07-19 Christopher Faylor <cgf@timesys.com>
3923 H.J. Lu <hongjiu.lu@intel.com>
3925 * subsegs.c (section_symbol): Don't create a new segment when
3926 existing segment is undefined.
3928 2004-07-16 Richard Earnshaw <rearnsha@arm.com>
3930 * config/tc-arm.c: Include include/opcode/arm.h.
3931 (ARM_EXT_*, ARM_ARCH_*, ARM_ANY, ARM_ALL, COPROC_ANY): Delete.
3932 (FPU_FPA_EXT_* FPU_VFP_EXT_*, FPU_ANY, FPU_NONE, FPU_MAVERICK): Delete.
3933 (FPU_ARCH_*): Delete.
3934 * Makefile.am: Update dependencies.
3935 * Makefile.in: Regenerate.
3937 2004-07-15 Nick Clifton <nickc@redhat.com>
3939 * configure.in: Accept armbe as a big-endian arm configuration.
3940 * configure: Regenerate.
3942 2004-07-13 Thomas Nystrom <thn@saeab.se>
3944 * config/tc-i386.c (T_SHIFTOP): New constant.
3945 (intel_e05_1): Handle '&', '|' and T_SHIFTOP.
3946 (intel_el1): Handle '~'.
3947 (intel_get_token): Handle '<>', '&', '|' and '~'.
3949 2004-07-13 Nick Clifton <nickc@redhat.com>
3951 (md_assemble): Remove spurious newline from end of as_bad error
3952 message.
3953 (intel_e05_1): Likewise.
3954 (intel_e11): Likewise.
3955 (intel_match_token): Likewise.
3957 2004-07-11 Andreas Schwab <schwab@suse.de>
3959 * config/tc-m68k.c: Convert to C90. Remove redundant
3960 declarations. Indentation fixup.
3961 [M68KCOFF]: Include "obj-coff.h" instead of declaring
3962 obj_coff_section ourselves.
3964 2004-07-09 James E Wilson <wilson@specifixinc.com>
3966 * config/tc-ia64.c (default_big_endian): New.
3967 (dot_byteorder, md_begin): Use it.
3968 (md_parse_option): Set it.
3970 2004-07-09 Nick Clifton <nickc@redhat.com>
3972 * configure.in: Change sh-sybmian-elf to sh-*-symbianelf.
3973 * configure: Regenerate.
3974 * NEWS: Change sh-sybmian-elf to sh-*-symbianelf.
3975 * config/tc-sh.c (sh_elf_final_processing): Use renamed version of
3976 sh_find_elf_flags if necessary.
3978 2004-07-08 Richard Sandiford <rsandifo@redhat.com>
3980 * config/tc-mips.c (mips_fix_adjustable): If the full addend is
3981 going to be split into more than one in-place addend, return 0
3982 for relocations against mergeable sections. Associate comments
3983 with code.
3985 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com>
3987 * Makefile.am (CPU_TYPES): Add crx.
3988 (TARGET_CPU_CFILES): Add config/tc-crx.c.
3989 (TARGET_CPU_HFILES): Add config/tc-crx.h.
3990 (DEPTC_crx_elf): New target.
3991 (DEPOBJ_crx_elf): Likewise.
3992 (DEP_crx_elf): Likewise.
3993 * Makefile.in: Regenerate.
3994 * configure.in: Add crx* target.
3995 * configure: Regenerate.
3996 * config/tc-crx.c: New file.
3997 * config/tc-crx.h: New file.
3998 * NEWS: Mention new target.
4000 2004-07-06 Nick Clifton <nickc@redhat.com>
4002 * config.in: Undefine TARGET_SYMBIAN by default.
4003 * configure.in:
4004 * configure: Regenerate. Add sh-symbian-elf target. If
4005 selected define TARGET_SYMBIAN.
4006 * config/tc-sh.h (TARGET_FORMAT): Select a Symbian target
4007 format if TARGET_SYMBIAN has been defined.
4009 * output-file.c (output_file_create): Report the target format
4010 chosen when bfd_openw reports that it is invalid.
4012 * config/obj-coff.c (coff_pseudo_table): Only define the weak
4013 pseudo for BFD based assemblers.
4015 2004-07-05 Andrew Stubbs <andrew.stubbs@superh.com>
4017 gas:
4018 * config/tc-sh.c (md_assemble): Change isspace to ISSPACE.
4019 (md_parse_option): Remove redundant -isa testing.
4020 Make bfd_arch variable const.
4021 (md_show_usage): Make bfd_arch variable const.
4023 2004-07-03 James E Wilson <wilson@specifixinc.com>
4025 * config/tc-ia64.c (emit_one_bundle): Check and set insn_addr.
4026 * config/tc-ia64.h (md_frag_check): Define.
4028 2004-07-03 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
4030 * config/obj-coff.c (obj_coff_weak): New .weak syntax for PE weak
4031 externals.
4032 * doc/as.texinfo (Weak): Document PE weak symbols.
4034 2004-07-03 Richard Sandiford <rsandifo@redhat.com>
4036 * config/tc-mips.c (HAVE_IN_PLACE_ADDENDS): New macro.
4037 (reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
4038 (mips_frob_file): Rework so that only a single pass through the
4039 relocs is needed. Allow %lo()s to have higher offsets than their
4040 corresponding %hi()s or %got()s.
4042 2004-07-02 Nick Clifton <nickc@redhat.com>
4044 * config/tc-arm.c (md_apply_fix3:BFD_RELOC_ARM_IMMEDIATE): Do not
4045 allow values which have come from undefined symbols.
4046 Always consider this fixup to have been processed as a reloc
4047 cannot be generated for it.
4049 2004-07-02 Alan Modra <amodra@bigpond.net.au>
4051 * frags.h (struct frag): Add has_code and insn_addr fields.
4052 * write.c (cvt_frag_to_fill): Invoke md_frag_check.
4053 * config/tc-ppc.c (md_assemble): Check and set insn_addr.
4054 * config/tc-ppc.h (md_frag_check): Define.
4056 2004-06-28 Maciej W. Rozycki <macro@linux-mips.org>
4058 * doc/Makefile.am (info): Rename goal to...
4059 (info-local): ... this, to preserve implicit dependencies.
4060 * doc/Makefile.in: Regenerate with automake 1.8.5.
4062 2004-06-25 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
4064 * config/tc-m32r.c (md_convert_frag): Changed for @PLT.
4065 (m32r_cgen_record_fixup_exp): Changed for @GOTOFF, @GOT.
4066 (m32r_fix_adjustable): Changed for @GOTOFF, @GOT, @PLT.
4067 (tc_gen_reloc): Likewise.
4068 (m32r_end_of_match): Add for @GOTOFF, @GOT, @PLT.
4069 (m32r_parse_name): Likewise.
4070 (m32r_cgen_parse_fix_exp): Likewise.
4071 * config/tc-m32r.h (md_parse_name): Define for @GOTOFF, @GOT, @PLT.
4072 (O_PIC_reloc): Likewise.
4073 (TC_CGEN_PARSE_FIX_EXP): Likewise..
4074 * cgen.c (gas_cgen_parse_operand): Add TC_CGEN_PARSE_FIX_EXP
4075 for @GOTOFF, @GOT, @PLT.
4077 2004-06-21 Jan Beulich <jbeulich@novell.com>
4079 * gas/symbols.c: While discarding ordinary local absolute symbols
4080 when --strip-local-absolute is in effect, retain file symbols.
4082 2004-06-20 Andreas Schwab <schwab@suse.de>
4084 * config/tc-m68k.c (mri_chip): Replace current_chip, not augment.
4085 (md_parse_option): Likewise.
4087 2004-06-17 Jan Beulich <jbeulich@novell.com>
4089 * config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
4090 * config/te-netware.h: New file.
4091 * config/te-ppcnw.h: Delete: Obsolete.
4092 * configure.in: Eliminate ill NetWare targets. Make generic
4093 NetWare target use proper emulation.
4094 * Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
4095 reference to new te-netware.h.
4096 * configure: Regenerate.
4097 * Makefile.in: Regenerate.
4099 2004-06-15 Martin Schwidefsky <schwidefsky@de.ibm.com>
4101 * config/tc-s390.c (s390_insn): Avoid incorrect signed/unsigned
4102 comparison in .insn pseudo operation.
4104 2004-06-15 Alan Modra <amodra@bigpond.net.au>
4106 * config/obj-coff.c (coff_adjust_section_syms): Use
4107 bfd_get_section_size instead of bfd_get_section_size_before_reloc.
4108 (coff_frob_section): Likewise.
4109 * config/tc-mips.c (md_apply_fix3): Likewise.
4110 * config/obj-elf.c (elf_frob_file): Use bfd_set_section_size.
4111 (elf_frob_file_after_relocs): Likewise.
4113 2004-06-10 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
4115 * config/tc-hppa.c (log2): Rename to exact_log2.
4116 (pa_next_subseg): Delete unused function.
4117 (create_new_space): Mark unused arguments with ATTRIBUTE_UNUSED.
4118 (create_new_subspace): Likewise.
4120 Bug gas/213
4121 * config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
4122 labels. Fix warning.
4124 2004-05-28 DJ Delorie <dj@redhat.com>
4126 * config/tc-mn10300.h (tc_fix_adjustable): Define.
4127 * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
4128 or non-merged symbols.
4130 2004-05-28 H.J. Lu <hongjiu.lu@intel.com>
4132 * config/tc-ia64.c (remove_marked_resource): Save, clear and
4133 restore the old slot when inserting srlz.i/srlz.d.
4135 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
4137 * Makefile.am: Regenerate dependecies.
4138 * Makefile.in: Regenerate.
4139 * config/tc-sh.c (valid_arch): Make unsigned.
4140 (preset_target_arch): Likewise.
4141 (md_begin): Use new architecture flags system.
4142 (get_specific): Likewise.
4143 (assemble_ppi): Likewise.
4144 (md_assemble): Likewise. Also fix error check for bad opcodes.
4145 (md_parse_option): Likewise. Also generate -isa values according
4146 to the table in bfd/cpu-sh.c instead of just constants. Also
4147 allow <arch>-up ISA variants.
4148 (sh_elf_final_processing): Replace if-else chain with a call to
4149 sh_find_elf_flags().
4151 2004-05-28 Peter Barada <peter@the-baradas.com>
4153 * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
4154 with zero offset into mode 2 addressing to save a word.
4156 2004-05-27 H.J. Lu <hongjiu.lu@intel.com>
4158 * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
4159 (ar_is_only_in_integer_unit): New.
4160 (ar_is_only_in_memory_unit): New.
4161 (generate_unwind_image): Silence gcc on 32bit host.
4162 (md_assemble): Use ar_is_only_in_integer_unit instead of
4163 ar_is_in_integer_unit. Check AR access.
4165 2004-05-27 Peter Barada <peter@the-baradas.com>
4167 * config/tc-m68k.c (md_begin): Sort the opcode table into
4168 alphabetical order.
4169 (m68k_compare_opcode): New function to do the sorting.
4171 2004-05-24 Peter Barada <peter@the-baradas.com>
4173 * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
4174 addressing on MIT style operands.
4175 * config/m68k-parse.y(yylex): Allow '-&' for predecrement
4176 w/mask addressing.
4177 * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
4178 operands.
4180 2004-05-23 Alan Modra <amodra@bigpond.net.au>
4182 * expr.c (operand, operator): Don't reject '++' and '--'.
4184 2004-05-20 Richard Sandiford <rsandifo@redhat.com>
4186 * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
4187 dwarf tables.
4189 2004-05-17 Adam Nemet <anemet@lnxw.com>
4191 * configure.in: Add ppc-*-lynxos*. Update i386-*-lynxos* to ELF.
4192 * configure: Regenerate.
4194 2004-05-13 Paul Brook <paul@codesourcery.com>
4196 * dw2gencfi.c (output_cie): Handle dwarf3 format CIE entries.
4198 2004-05-13 Joel Sherrill <joel@oarcorp.com>
4200 * configure.in (or32-*-rtems*): Switch to elf.
4201 * configure: Regenerate.
4203 2004-05-13 Nick Clifton <nickc@redhat.com>
4205 * po/fr.po: Updated French translation.
4207 2004-05-11 Nick Clifton <nickc@redhat.com>
4209 * doc/as.texinfo (Section): Document G and T flags to .section
4210 directive. Document the extra arguments that the G flag
4211 requires. Document the #tls flag.
4213 2004-05-11 H.J. Lu <hongjiu.lu@intel.com>
4215 * subsegs.c (section_symbol): Create a new section symbol if
4216 the existing one doesn't match.
4217 * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.
4219 2004-05-07 Richard Sandiford <rsandifo@redhat.com>
4221 * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
4222 to cope with VR4181A errata MD(1) and MD(4).
4224 2004-05-07 Brian Ford <ford@vss.fsi.com>
4226 * NEWS: Mention .secrel32 for pe[i]-i386.
4228 2004-05-07 Alexandre Oliva <aoliva@redhat.com>
4230 * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
4231 (HANDLE_ALIGN): New.
4233 2004-05-06 Daniel Jacobowitz <dan@debian.org>
4235 * Makefile.am (DIST_SUBDIRS): Define.
4236 * aclocal.m4: Regenerate with automake 1.8.4.
4237 * Makefile.in: Likewise.
4238 * doc/Makefile.in: Likewise.
4240 2004-05-06 David Mosberger-Tang <davidm@hpl.hp.com>
4242 * config/tc-ia64.c (dot_serialize): Declare.
4243 (dot_serialize): New function.
4244 (md_pseudo_table): Add ".serialize.data" and
4245 ".serialize.instruction" directives.
4247 2004-05-06 Nick Clifton <nickc@redhat.com>
4249 * messages (as_internal_value_out_of_range): Print a message about
4250 a value being out of range. Be consistent about whether the
4251 values are printed in decimal or hexadecimal.
4252 (as_warn_value_out_of_range): Generate a warning message about an
4253 out of range value.
4254 (as_bad_value_out_of_range): Generate an error message about an
4255 out of range value.
4256 * as.h: Prototype the new functions.
4257 * config/tc-alpha.c (insert_operand): Use new function.
4258 * config/tc-arc.c (arc_insert_operand): Likewise.
4259 * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
4260 * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
4261 * config/tc-ppc.c (ppc_insert_operand): Likewise.
4262 * config/tc-s390.c (s390_insert_operand): Likewise.
4263 * config/tc-v850.c (v850_insert_operand): Likewise.
4265 2004-05-05 Alexandre Oliva <aoliva@redhat.com>
4267 * configure.in: Set em=linux for frv-*-*linux*.
4268 * configure: Rebuilt.
4269 * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
4270 (frv_md_fdpic_enabled): New.
4271 * config/tc-frv.c (frv_md_fdpic_enabled): New.
4272 (DEFAULT_FDPIC): New.
4273 (frv_flags): Use DEFAULT_FDPIC.
4274 (frv_pic_flag): Likewise.
4275 (OPTION_NOPIC): New.
4276 (md_longopts): Add -mnopic.
4277 (md_parse_option): Handle it.
4278 (md_show_usage): Add -mfdpic and -mnopic.
4280 2004-05-05 Peter Barada <peter@the-baradas.com>
4282 * config/tc-m68k.c: Add find_cf_chip to print list of valid
4283 chips for invalid coldfire instructions, rename selectors
4284 for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
4285 add current_chip to track which chip is referred to(including save/restore),
4286 use current_chip to select control registers, not current_arch.
4287 (md_show_usage): Add new chips.
4288 * doc/c-m68k.texi: Document new command line switches.
4290 2004-05-05 Jakub Jelinek <jakub@redhat.com>
4292 * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
4293 (NOP_OPCODE): Define.
4294 (s390_align_code): Remove prototype.
4295 * tc-s390.c (s390_align_code): Remove.
4297 2004-05-04 H.J. Lu <hongjiu.lu@intel.com>
4299 * config/tc-ia64.c (make_unw_section_name): Removed.
4300 (start_unwind_section): New function.
4301 (generate_unwind_image): Take const segT instead of const
4302 char *.
4303 (dot_handlerdata): Adjusted.
4304 (dot_endp): Likewise.
4306 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
4308 * config/obj-elf.c (obj_elf_change_section): Allow the
4309 ".note.GNU-stack" section has SHF_EXECINSTR.
4311 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
4313 * config/obj-elf.c (get_section): Return bfd_boolean.
4314 (obj_elf_change_section): Call bfd_get_section_by_name_if
4315 instead of bfd_map_over_sections.
4317 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
4319 * config/obj-elf.c (get_section): New function.
4320 (obj_elf_change_section): Support multiple sections with same
4321 name.
4323 2004-04-30 Nick Clifton <nickc@redhat.com>
4325 * config/tc-arm.c (create_register_alias): Fix typo checking for
4326 case sensitive register aliases.
4327 (co_proc_number): Use error message string in all_reg_maps[]
4328 array.
4329 (cp_reg_required_here): Likewise.
4330 (fp_reg_required_here): Likewise.
4332 2004-04-29 Brian Ford <ford@vss.fsi.com>
4334 * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.
4336 2004-04-28 Chris Demetriou <cgd@broadcom.com>
4338 * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
4339 (load_address, macro, mips_ip, md_parse_option)
4340 (mips_force_relocation, mips_validate_fix, md_apply_fix3)
4341 (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
4342 embedded-PIC handling, and update comments.
4343 (SWITCH_TABLE): Remove.
4344 * config/tc-mips.h (DIFF_EXPR_OK): Delete.
4345 (enum mips_pic_level): Remove EMBEDDED_PIC.
4346 (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
4347 (TC_FORCE_RELOCATION): Update comment.
4348 * ecoff.c (ecoff_build_lineno): Add comment about some code that
4349 might be safe to remove now that MIPS embedded-PIC is gone.
4351 2004-04-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
4353 * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
4354 call to obj_set_subsection_attributes.
4355 (obj_som_init_stab_section): Likewise.
4356 * config/tc-hppa.c (default_subspace_dict): Add comdat field.
4357 (pa_def_subspaces): Provide comdat default.
4358 (pa_subspace): Handle new "comdat" parameter. Set SEC_LINK_ONCE and
4359 not SEC_IS_COMMON if section is comdat, common or dup_common. Update
4360 calls to create_new_subspace and update_subspace to pass comdat flag.
4361 (create_new_subspace, update_subspace): Add new comdat argument. Use
4362 it in calls to obj_set_subsection_attributes.
4363 * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
4364 and use of comdat, common and dup_comm parameters.
4366 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
4368 * config/obj-elf.c (obj_elf_change_section): Check if the old
4369 group name is NULL before comparison.
4371 2004-04-23 Chris Demetriou <cgd@broadcom.com>
4373 * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.
4375 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
4377 * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.
4379 2004-04-23 Chris Demetriou <cgd@broadcom.com>
4381 * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
4382 (OPTION_MEMBEDDED_PIC): Remove.
4383 (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
4384 (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
4385 (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
4386 (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
4387 (OPTION_ELF_BASE): Renumber.
4388 (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
4389 (md_show_usage): Remove mention of -membedded-pic.
4390 * doc/as.texinfo: Remove mention of -membedded-pic.
4392 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
4394 * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
4395 * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
4396 a.out support.
4397 (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
4398 s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
4399 USE_GLOBAL_POINTER_OPT.
4401 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
4403 * config/tc-mips.c (macro): One more use of load_delay_nop.
4405 2004-04-22 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
4407 * config/tc-mips.c (load_delay_nop): New function.
4408 (load_address, macro): Use load_delay_nop() to build a nop
4409 which can be omitted with gpr_interlocks.
4411 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
4413 * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
4414 cop_interlocks): Remove superfluous CPU entries.
4416 2004-04-22 Paul Brook <paul@codesourcery.com>
4418 * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.
4420 2004-04-22 Peter Barada <peter@the-baradas.com>
4422 * NEWS: Added support for EMAC instructions and MAC/EMAC
4423 Motorola syntax.
4424 * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
4425 scale factor tokens, trailing_ampersand to mark mask addressing
4426 for MAC/EMAC instructions.
4427 * config/m68k-parse.y: Add options_ampersand clause, '<<',
4428 '>>'.
4429 (yylex): Handle '>', '<', and '&' following '+'.
4430 * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
4431 architectures in archs[].
4432 (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
4433 for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
4434 respectively.
4435 (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
4436 (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
4437 cases.
4438 Add EMAC operands to init_table[].
4440 2004-04-22 Bruno De Bus <bdebus@elis.ugent.be>
4442 * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
4443 state.
4444 (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
4445 * config/tc-arm.c (enum mstate): Delete from here.
4446 (mapping_state): Remove the static mapstate variable and instead
4447 store the state in the segment. This allows a per-section mapping
4448 state. Handle and ignore MAP_UNDEFINED states.
4449 (arm_elf_change_section): Get the current mapping state from the
4450 new section.
4451 (s_ltorg): Set the mapping state to MAP_DATA.
4452 (arm_cleanup): Use arm_elf_change_section to get the mapping state
4453 for each pool as it is emitted.
4455 2004-04-22 Nick Clifton <nickc@redhat.com>
4457 * config/tc-arm.h: Formatting tidy ups.
4459 2004-04-20 Chris Demetriou <cgd@broadcom.com>
4461 * NEWS: Note that MIPS -membedded-pic option is deprecated.
4463 2004-04-20 DJ Delorie <dj@redhat.com>
4465 * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
4466 * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
4467 [TE_PE] (O_secrel): Define.
4468 [TE_PE] (x86_pe_cons_fix_new): New.
4469 [TE_PE] (pe_directive_secrel): Likewise.
4470 (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.
4472 2004-04-19 Eric Christopher <echristo@redhat.com>
4474 * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
4475 of previous patch for fix in gcc.
4477 2004-04-19 Jakub Jelinek <jakub@redhat.com>
4479 * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.
4481 2004-04-19 Nathan Sidwell <nathan@codesourcery.com>
4483 * read.c (do_align): Call md_flush_pending_output, if defined.
4485 2004-04-16 Alan Modra <amodra@bigpond.net.au>
4487 * expr.c (operand): Correct checks for ++ and --.
4489 2004-04-14 H.J. Lu <hongjiu.lu@intel.com>
4491 * config/tc-generic.c: Add some comments.
4493 2004-04-14 Richard Sandiford <rsandifo@redhat.com>
4495 * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
4496 -{no-}mfix-vr4122-bugs.
4497 * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
4498 (append_insn, mips_emit_delays): Update accordingly.
4499 (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
4500 (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
4501 (md_parse_option): Update after above changes.
4502 (md_show_usage): Add -mfix-vr4120.
4504 2004-04-13 Bob Wilson <bob.wilson@acm.org>
4506 * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
4507 of .section directive; add a reference to the ELF .subsection
4508 directive.
4510 2004-04-13 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
4512 * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
4513 in parallel.
4515 2004-04-11 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
4517 * Makefile.am: Remove mips from aout targets.
4518 * Makefile.in: Regenerate.
4519 * configure.in: Remove mips-dec-bsd* target.
4520 * configure: Regenerate.
4522 2004-04-07 Alan Modra <amodra@bigpond.net.au>
4524 PR 96
4525 * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
4526 to struct map_bfd. Adjust MAP macro, and define MAP32, MAP64.
4527 Update "mapping". Restrict some @ modifiers to 32 bit.
4529 2004-04-01 Asgari Jinia <asgarij@kpitcummins.com>
4530 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
4532 * config/tc-sh.c (dont_adjust_reloc_32): New variable.
4533 (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
4534 dont_adjust_reloc_32 is set.
4535 (md_longopts): Add option -renesas.
4536 (md_parse_option, md_show_usage): Likewise.
4537 * doc/c-sh.texi: Likewise.
4539 2004-04-01 Dave Korn <dk@artimi.com>
4541 * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
4542 hi16 and lo16 fixS structs.
4543 (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
4544 exactly the same way as for RELOC_DLX_REL16.
4545 (machine_ip): properly respect LO flag in the_insn and
4546 output RELOC_DLX_LO16 rather than RELOC_DLX_16.
4547 (md_apply_fix3): apply RELOC_DLX_LO16.
4549 2004-03-30 Stan Shebs <shebs@apple.com>
4551 Remove long-obsolete MPW support.
4552 * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
4553 * configure.in: Remove mention of ppc-*-mpw* config.
4554 * configure.in: Likewise.
4556 2004-03-30 Nick Clifton <nickc@redhat.com>
4558 * config/tc-arm.c (meabi_flags): Make its use conditional upon
4559 OBJ_ELF being defined.
4561 2004-03-27 Alan Modra <amodra@bigpond.net.au>
4563 * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
4565 2004-03-23 Paul Brook <paul@codesourcery.com>
4567 * config/tc-arm.c (meabi_flags): New variable.
4568 (arm_parse_eabi): New function.
4569 (md_begin): Set flags for EABI v3.
4570 (arm_eabis): Add.
4571 (arm_long_opts): Add meabi.
4572 * doc/as.texinfo <ARM>: Document -meabi.
4573 * doc/c-arm.texi: Ditto.
4575 2004-03-22 Bob Wilson <bob.wilson@acm.org>
4577 * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
4578 tables even when use_literal_section flag is not set.
4580 2004-03-22 Alan Modra <amodra@bigpond.net.au>
4582 * config/tc-sh.c: Remove trailing whitespace.
4584 2004-03-22 Hans-Peter Nilsson <hp@axis.com>
4586 * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
4587 --mul-bug-abort and the default behavior.
4588 * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
4589 (err_for_dangerous_mul_placement): New variable.
4590 (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
4591 macros.
4592 (md_cris_relax_table): Have placeholder for STATE_MUL.
4593 (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
4594 (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
4595 case doing nothing.
4596 (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
4597 STATE_BYTE)>: Ditto.
4598 (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
4599 alignment and position of this frag, emit error message if
4600 suspicious.
4601 (md_assemble): For a multiply insn and when checking it,
4602 transform the current frag into a special frag for that purpose.
4603 (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
4604 OPTION_MULBUG_ABORT_ON>: Handle new options.
4606 2004-03-19 Bob Wilson <bob.wilson@acm.org>
4608 * config/tc-xtensa.c (mark_literal_frags): New function.
4609 (xtensa_move_literals): Call mark_literal_frags for all literal
4610 segments, including init and fini literal segments.
4611 (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
4613 2004-03-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
4615 * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
4616 (pa_comm): Set BSF_OBJECT in symbol flags.
4618 2004-03-19 Alan Modra <amodra@bigpond.net.au>
4620 * Makefile.am: Run "make dep-am".
4621 * Makefile.in: Regenerate.
4622 * doc/Makefile.in: Regenerate.
4623 * config.in: Regenerate.
4624 * po/gas.pot: Regenerate.
4626 2004-03-18 Nathan Sidwell <nathan@codesourcery.com>
4628 * read.c (read_a_source_file): Use demand_empty_rest_of_line.
4629 (demand_empty_rest_of_line): Issue an error here.
4630 (ignore_rest_of_line): Silently skip to end.
4631 (demand_copy_string): Issue an error, not warning.
4632 (equals): Likewise.
4633 * config/obj-elf.c (obj_elf_section_name): Likewise.
4634 (obj_elf_section): Likewise.
4635 * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
4636 (arc_extinst): Likewise.
4637 * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
4638 (dot_spill): Likewise.
4639 (dot_unwabi): Likewise.
4640 (dot_prologue): Likewise.
4642 * expr.c (operand): Reject ++ and --.
4643 (operator): Likewise.
4645 2004-03-17 Kaz Kojima <kkojima@rr.iij4u.or.jp>
4647 * config/tc-sh.c: Include dw2gencfi.h.
4648 (sh_cfi_frame_initial_instructions): New function.
4649 (sh_regname_to_dw2regnum): Likewise.
4650 * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
4651 file.
4652 (TARGET_USE_CFIPOP): Define.
4653 (tc_cfi_frame_initial_instructions): Likewise.
4654 (tc_regname_to_dw2regnum): Likewise.
4655 (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
4656 * Makefile.am: Update dependencies.
4657 * Makefile.in: Regenerate.
4659 2004-03-17 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
4661 * configure.in: Switch sh-*-rtems* to ELF. Add sh-*-rtemscoff*.
4662 * configure: Regenerate.
4664 2004-03-12 Bob Wilson <bob.wilson@acm.org>
4666 * read.c (s_leb128): Call md_flush_pending_output.
4668 2004-03-12 Michal Ludvig <mludvig@suse.cz>
4670 * config/tc-i386.c (output_insn): Handle PadLock instructions.
4671 * config/tc-i386.h (CpuPadLock): New define.
4672 (CpuUnknownFlags): Added CpuPadLock.
4674 2004-03-07 Andreas Schwab <schwab@suse.de>
4676 * doc/c-hppa.texi (HPPA Directives): Fix typo.
4678 2004-03-07 Richard Henderson <rth@redhat.com>
4680 * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
4681 (cfi_finish): Likewise for fde.
4683 2004-03-05 H.J. Lu <hongjiu.lu@intel.com>
4685 * config/tc-ia64.c (md_assemble): Properly handle NULL
4686 align_frag.
4687 (ia64_handle_align): Don't abort if failed to add a stop bit.
4689 2004-03-04 H.J. Lu <hongjiu.lu@intel.com>
4691 * Makefile.in: Regenerated.
4692 * aclocal.m4: Likewise.
4693 * configure: Likewise.
4694 * doc/Makefile.in: Likewise.
4696 2004-03-03 H.J. Lu <hongjiu.lu@intel.com>
4698 * config/tc-ia64.c (dot_align): New.
4699 (ia64_do_align): Make it static.
4700 (md_pseudo_table): Use "dot_align" for "align".
4701 (ia64_md_do_align): Don't set align_frag here.
4702 (ia64_handle_align): Add a stop bit to the previous bundle if
4703 needed.
4705 * config/tc-ia64.h (ia64_do_align): Removed.
4707 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com>
4709 * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
4710 -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
4711 (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
4712 the most general type or the user specifically requested it.
4713 (md_assemble): Add a new error message for when an instruction
4714 is understood, but is not allowed due to an -isa option.
4716 2004-03-02 H.J. Lu <hongjiu.lu@intel.com>
4718 * config/tc-ia64.c (align_frag): New.
4719 (md_assemble): Set the tc_frag_data field in align_frag for
4720 IA64_OPCODE_FIRST instructions.
4721 (ia64_md_do_align): Set align_frag.
4722 (ia64_handle_align): Add a stop bit if needed.
4724 * config/tc-ia64.h (TC_FRAG_TYPE): New.
4725 (TC_FRAG_INIT): New.
4727 2004-03-01 Richard Sandiford <rsandifo@redhat.com>
4729 * config/tc-frv.c (fr400_audio): New variable.
4730 (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
4731 (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
4732 (target_implements_insn_p): New function.
4733 (md_assemble): Report an error if the processor doesn't implement
4734 the instruction.
4736 2004-02-27 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
4738 * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
4739 (md_parse_option): Ditto.
4740 (OPTION_NO_SPECIAL_M32R): Added.
4741 (md_show_usage): Document it.
4742 (enable_speial_m32r): Changed a default value from 0 to 1.
4743 * doc/c-m32r.texi: Document the -no-bitinst option.
4745 2004-02-27 Nick Clifton <nickc@redhat.com>
4747 * config/tc-sh.c (get_operand): Revert previous delta.
4748 (tc_gen_reloc): Check for an unknown reloc type before processing
4749 the addend.
4751 2004-02-27 Hannes Reinecke <hare@suse.de>
4753 * config/tc-s390.c (s390_insn): Correct range check for opcode in
4754 .insn pseudo operation.
4756 2004-02-27 Anil Paranjpe <anilp1@kpitcummins.com>
4758 * config/tc-sh.c (get_operand): In case of #Imm, check has been
4759 added for wrong syntax.
4761 2004-02-26 Eric Christopher <echristo@redhat.com>
4763 * config/tc-mips.c (mips_dwarf2_addr_size): New.
4764 * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
4766 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com>
4768 * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
4769 nibble types to assembler.
4771 2004-02-25 Fred Fish <fnf@redhat.com>
4773 * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
4775 2004-02-20 James E Wilson <wilson@specifixinc.com>
4777 * config/tc-ia64.c (slot_index): New arg before_relax. Use instead of
4778 finalize_syms.
4779 (fixup_unw_records): New arg before_relax. Pass to slot_index.
4780 (ia64_estimate_size_before_relax): New.
4781 (ia64_convert_frag): Pass 0 to fixup_unw_records. Add comment.
4782 (generate_unwind_image): Pass 1 to fixup_unw_records.
4783 * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
4784 (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
4786 2004-02-19 Jakub Jelinek <jakub@redhat.com>
4788 * stabs.c (generate_asm_file): Avoid warning about use of
4789 uninitialized variable.
4791 2004-02-18 David Mosberger <davidm@hpl.hp.com>
4793 * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
4794 body, and endp, allow unwind records which do not have a "t"
4795 (time/instruction) field.
4797 2004-02-17 Petko Manolov <petkan@nucleusys.com>
4799 * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
4800 (do_mav_dspsc_2): Likewise.
4801 Fix accumulator registers move opcodes.
4803 2004-02-13 Hannes Reinecke <hare@suse.de>
4804 Jakub Jelinek <jakub@redhat.com>
4806 * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
4808 2004-02-10 Steve Ellcey <sje@cup.hp.com>
4810 * config/tc-ia64.h (ia64_frob_symbol): New declaration.
4811 (tc_frob_symbol): New macro definition.
4812 * config/tc-ia64.c (ia64_frob_symbol): New routine.
4814 2004-02-09 Daniel Jacobowitz <drow@mvista.com>
4816 * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
4817 read-only.
4819 2004-02-09 Nathan Sidwell <nathan@codesourcery.com>
4821 * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
4822 (TC_CASE_SENSITIVE): ... this.
4823 * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
4824 * doc/internals.texi (TC_CASE_SENSITIVE): Document.
4826 2004-02-06 James E Wilson <wilson@specifixinc.com>
4828 * config/tc-ia64.c (dot_endp): Delete call to output_endp.
4829 (generate_unwind_image): Re-add it here.
4831 2004-02-06 Nathan Sidwell <nathan@codesourcery.com>
4833 * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
4834 * read.h (SKIP_WHITESPACE): Turn into an expression.
4835 * read.c (read_a_source_file): A pseudo is removed by having a
4836 NULL handler.
4838 2004-02-05 James E Wilson <wilson@specifixinc.com>
4840 * config/tc-ia64.c (output_endp): New.
4841 (count_bits): Delete.
4842 (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
4843 endp unwind records.
4844 (fixup_unw_records): Handle endp unwind records. Delete code for
4845 shortening prologue regions not followed by a body record.
4846 (dot_endp): Call add_unwind_entry to emit endp unwind record.
4847 * config/tc-ia64.h (unw_record_type): Add endp.
4849 2004-02-03 James E Wilson <wilson@specifixinc.com>
4851 * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
4852 fill padding bytes with zeroes.
4853 (emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
4854 sets unwind_record slot_number and slot_frag fields.
4856 2004-02-02 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4858 * config/tc-mips.c (add_got_offset_hilo): New function.
4859 (macro): Use load_register() and add_got_offset_hilo() to load
4860 constants instead of hardcoding code sequences throughout.
4862 2004-01-28 H.J. Lu <hongjiu.lu@intel.com>
4864 * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
4866 2004-01-26 Bernardo Innocenti <bernie@develer.com>
4868 * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
4869 like m68k-elf.
4870 * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
4871 of hard-coded test for TARGET_OS=elf.
4873 2004-01-24 Chris Demetriou <cgd@broadcom.com>
4875 * config/tc-mips.c (hilo_interlocks): Change definition
4876 so that MIPS32, MIPS64 and later ISAs are included, along with
4877 the already-included machines. Update comments.
4879 2004-01-23 Daniel Jacobowitz <drow@mvista.com>
4881 * config/tc-arm.c (tc_gen_reloc): Improve error message for
4882 undefined local labels.
4884 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4886 * config/tc-mips.c (load_address, macro): Update comments about
4887 NewABI GP relaxation.
4889 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4891 * config/tc-mips.c (macro_build): Remove place and counter arguments.
4892 (mips_build_lui, macro_build_ldst_constoffset): Likewise.
4893 (mips16_macro_build, macro_build_jalr): Remove counter argument.
4894 (set_at, load_register, load_address, move_register): Likewise.
4895 (load_got_offset, add_got_offset): Likewise.
4896 Update all calls and tidy accordingly.
4898 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4900 * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
4901 (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
4902 (RELAX_USE_SECOND): Bump to 0x10000.
4903 (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
4904 (mips_macro_warning): New variable.
4905 (md_assemble): Wrap macro expansion in macro_start() and macro_end().
4906 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
4907 (relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
4908 of RELAX_ENCODE.
4909 (append_insn): Update mips_macro_warning.sizes.
4910 (macro_start, macro_warning, macro_end): New functions.
4911 (macro_build): Don't emit warnings here.
4912 (macro_build_lui, md_estimate_size_before_relax): ...or here.
4913 (md_convert_frag): Check for cases where one macro alternative
4914 needs a warning and the other doesn't. Emit a warning if the
4915 longer sequence was chosen.
4917 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4919 * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
4920 * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
4921 the first sequence, the size of the second sequence, and a flag
4922 that says whether we should warn.
4923 (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
4924 (RELAX_FIRST, RELAX_SECOND): New.
4925 (mips_relax): New variable.
4926 (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
4927 (append_insn): Remove "place" argument. Use mips_relax.sequence
4928 rather than "place" to check whether we're expanding the second
4929 alternative of a relaxable macro. Remove redundant check for
4930 branch relaxation. If generating a normal insn, and there
4931 is not enough room in the current frag, call relax_close_frag()
4932 to close it. Update mips_relax.sizes[]. Emit fixups for the
4933 second version of a relaxable macro. Record the first relaxable
4934 fixup in mips_relax. Remove tc_gen_reloc workaround.
4935 (macro_build): Remove all uses of "place". Use mips_relax.sequence
4936 in the same way as in append_insn.
4937 (mips16_macro_build): Remove "place" argument.
4938 (macro_build_lui): As for macro_build. Don't drop the add_symbol
4939 when generating the second version of a relaxable macro.
4940 (load_got_offset, add_got_offset): New functions.
4941 (load_address, macro): Use new relaxation machinery. Remove
4942 tc_gen_reloc workarounds.
4943 (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
4944 version of a relaxable macro is needed. Return -RELAX_SECOND if the
4945 first version is needed.
4946 (tc_gen_reloc): Remove relaxation handling.
4947 (md_convert_frag): Go through the fixups for a relaxable macro and
4948 mark those that belong to the unneeded alternative as done. If the
4949 second alternative is needed, adjust the fixup addresses to account
4950 for the deleted first alternative.
4952 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4954 * frags.h (frag_room): Declare.
4955 * frags.c (frag_room): New function.
4956 * doc/internals.texi: Document it.
4958 2004-01-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
4960 * config/tc-mips.c (append_insn): Don't do r3900 interlock
4961 optimization for -mtune=r3900, as this will break on other CPUs.
4963 2004-01-11 Tom Rix <tcrix@worldnet.att.net>
4965 * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
4966 be relaxed, use fixup.
4967 (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
4969 2004-01-19 Jakub Jelinek <jakub@redhat.com>
4971 * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
4972 precision operands.
4974 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4976 * config/tc-mips.c (append_insn): Properly detect variant frags
4977 that preclude swapping of relaxed branches. Correctly swap
4978 instructions between frags when dealing with relaxed branches.
4980 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4982 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
4983 throughout.
4984 * aclocal.m4: Regenerate.
4985 * configure: Regenerate.
4987 2004-01-12 Anil Paranjpe <anilp1@KPITCummins.com>
4989 * config/tc-h8300.c (build_bytes): Apply relaxation to bit
4990 manipulation insns.
4992 2004-01-12 Richard Sandiford <rsandifo@redhat.com>
4994 * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
4995 reloc, reserve space for the delay slot as well as the jalr itself.
4997 2004-01-09 Paul Brook <paul@codesourcery.com>
4999 * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
5000 (do_vfp_sp2_from_reg2): New function.
5001 (insns): Use them.
5002 (do_vfp_dp_from_reg2): Check return values properly.
5004 2004-01-08 Ian Lance Taylor <ian@wasabisystems.com>
5006 * config/tc-mips.c (warn_nops): Remove static variable.
5007 (macro): Remove test of warn_nops.
5008 (md_shortops): Remove 'n'.
5009 (md_parse_option): Remove 'n' case.
5010 (md_show_usage): Remove -n.
5011 * doc/as.texinfo (Overview): Remove MIPS -n option.
5012 * doc/c-mips.texi (MIPS Opts): Remove mention -n.
5013 * NEWS: Mention removal of MIPS -n option.
5015 * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
5016 (cop_interlocks): Check ISA level.
5017 (cop_mem_interlocks): Define.
5018 (reg_needs_delay): Check cop_interlocks rather than
5019 ISA_HAS_COPROC_DELAYS.
5020 (append_insn): Likewise. Use cop_mem_interlocks rather than
5021 directly checking mips_opts.isa.
5022 (mips_emit_delays): Likewise.
5024 2004-01-07 H.J. Lu <hongjiu.lu@intel.com>
5026 * config/tc-ia64.c (unwind): Move next_slot_number and
5027 next_slot_frag to ...
5028 (unw_rec_list): Here.
5029 (free_list_records): Removed.
5030 (output_unw_records): Likewise.
5031 (generate_unwind_image): Make it void.
5032 (alloc_record): Initialize next_slot_number and next_slot_frag.
5033 (slot_index): Take .org, .space and .align into account.
5034 (fixup_unw_records): Don't set slot_number to 0. Use
5035 list->next_slot_number and list->next_slot_frag instead of
5036 unwind.next_slot_number and unwind.next_slot_frag.
5037 (ia64_convert_frag): New.
5038 (generate_unwind_image): Generate a rs_machine_dependent frag
5039 for unwind record.
5040 (emit_one_bundle): Use list->next_slot_number and
5041 list->next_slot_frag instead of unwind.next_slot_number and
5042 unwind.next_slot_frag.
5044 * config/tc-ia64.h (md_convert_frag): Defined as
5045 ia64_convert_frag.
5046 (md_estimate_size_before_relax): Defined as (f)->fr_var.
5048 2004-01-06 Alexandre Oliva <aoliva@redhat.com>
5050 2003-12-19 Alexandre Oliva <aoliva@redhat.com>
5051 * config/tc-frv.h (md_apply_fix3): Don't define.
5052 * config/tc-frv.c (md_apply_fix3): New. Shift/truncate %hi/%lo
5053 operands.
5054 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
5055 2003-10-07 Alexandre Oliva <aoliva@redhat.com>
5056 * config/tc-frv.c (line_separator_chars): Add `!'.
5057 2003-09-19 Alexandre Oliva <aoliva@redhat.com>
5058 * config/tc-frv.c (md_assemble): Clear insn upfront.
5059 2003-09-18 Alexandre Oliva <aoliva@redhat.com>
5060 * config/tc-frv.c (OPTION_FDPIC): New macro.
5061 (md_longopts): Add mfdpic.
5062 (md_parse_option): Handle it.
5063 2003-08-04 Alexandre Oliva <aoliva@redhat.com>
5064 * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
5065 FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
5066 (frv_pic_ptr): Parse funcdesc.
5068 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
5070 * doc/as.texinfo: Let texi2pod parse asconfig.texi and
5071 gasver.texi. Remove duplicate symbol definitions for texi2pod.
5073 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
5075 * Makefile.am (Makefile): Move the dependency on
5076 $(BFDDIR)/configure.in to...
5077 (CONFIG_STATUS_DEPENDENCIES): ... here.
5078 (AUTOMAKE_OPTIONS): Require automake 1.8.
5079 * Makefile.in: Regenerate.
5080 * doc/Makefile.am (BASEDIR, BFDDIR): Define.
5081 (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
5082 $(BFDDIR)/configure.in here as well.
5083 * doc/Makefile.in: Regenerate.
5085 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
5087 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
5088 * Makefile.in: Regenerate.
5089 * aclocal.m4: Regenerate.
5090 * doc/Makefile.am (install, install-info): Remove.
5091 (install-data-local): A new hook for install-info.
5092 (AUTOMAKE_OPTIONS): Require automake 1.8.
5093 * doc/Makefile.in: Regenerate.
5095 2004-01-02 Nutan Singh <nutan@kpitcummins.com>
5097 * doc/c-sh.texi: Update description about floating point behavior
5098 of SH family.
5100 2004-01-02 Bernardo Innocenti <bernie@develer.com>
5102 * configure.in: Add m68k-uClinux target.
5103 * configure: Regenerate.
5105 For older changes see ChangeLog-0203
5106 \f
5107 Local Variables:
5108 mode: change-log
5109 left-margin: 8
5110 fill-column: 74
5111 version-control: never
5112 End: