bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  22    MA 02110-1301, USA.  */
  23
  24 /*
  25 SECTION
  26         Relocations
  27
  28         BFD maintains relocations in much the same way it maintains
  29         symbols: they are left alone until required, then read in
  30         en-masse and translated into an internal form.  A common
  31         routine <<bfd_perform_relocation>> acts upon the
  32         canonical form to do the fixup.
  33
  34         Relocations are maintained on a per section basis,
  35         while symbols are maintained on a per BFD basis.
  36
  37         All that a back end has to do to fit the BFD interface is to create
  38         a <<struct reloc_cache_entry>> for each relocation
  39         in a particular section, and fill in the right bits of the structures.
  40
  41 @menu
  42 @* typedef arelent::
  43 @* howto manager::
  44 @end menu
  45
  46 */
  47
  48 /* DO compile in the reloc_code name table from libbfd.h.  */
  49 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  50
  51 #include "sysdep.h"
  52 #include "bfd.h"
  53 #include "bfdlink.h"
  54 #include "libbfd.h"
  55 /*
  56 DOCDD
  57 INODE
  58         typedef arelent, howto manager, Relocations, Relocations
  59
  60 SUBSECTION
  61         typedef arelent
  62
  63         This is the structure of a relocation entry:
  64
  65 CODE_FRAGMENT
  66 .
  67 .typedef enum bfd_reloc_status
  68 .{
  69 .  {* No errors detected.  *}
  70 .  bfd_reloc_ok,
  71 .
  72 .  {* The relocation was performed, but there was an overflow.  *}
  73 .  bfd_reloc_overflow,
  74 .
  75 .  {* The address to relocate was not within the section supplied.  *}
  76 .  bfd_reloc_outofrange,
  77 .
  78 .  {* Used by special functions.  *}
  79 .  bfd_reloc_continue,
  80 .
  81 .  {* Unsupported relocation size requested.  *}
  82 .  bfd_reloc_notsupported,
  83 .
  84 .  {* Unused.  *}
  85 .  bfd_reloc_other,
  86 .
  87 .  {* The symbol to relocate against was undefined.  *}
  88 .  bfd_reloc_undefined,
  89 .
  90 .  {* The relocation was performed, but may not be ok - presently
  91 .     generated only when linking i960 coff files with i960 b.out
  92 .     symbols.  If this type is returned, the error_message argument
  93 .     to bfd_perform_relocation will be set.  *}
  94 .  bfd_reloc_dangerous
  95 . }
  96 . bfd_reloc_status_type;
  97 .
  98 .
  99 .typedef struct reloc_cache_entry
 100 .{
 101 .  {* A pointer into the canonical table of pointers.  *}
 102 .  struct bfd_symbol **sym_ptr_ptr;
 103 .
 104 .  {* offset in section.  *}
 105 .  bfd_size_type address;
 106 .
 107 .  {* addend for relocation value.  *}
 108 .  bfd_vma addend;
 109 .
 110 .  {* Pointer to how to perform the required relocation.  *}
 111 .  reloc_howto_type *howto;
 112 .
 113 .}
 114 .arelent;
 115 .
 116 */
 117
 118 /*
 119 DESCRIPTION
 120
 121         Here is a description of each of the fields within an <<arelent>>:
 122
 123         o <<sym_ptr_ptr>>
 124
 125         The symbol table pointer points to a pointer to the symbol
 126         associated with the relocation request.  It is the pointer
 127         into the table returned by the back end's
 128         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 129         referenced through a pointer to a pointer so that tools like
 130         the linker can fix up all the symbols of the same name by
 131         modifying only one pointer. The relocation routine looks in
 132         the symbol and uses the base of the section the symbol is
 133         attached to and the value of the symbol as the initial
 134         relocation offset. If the symbol pointer is zero, then the
 135         section provided is looked up.
 136
 137         o <<address>>
 138
 139         The <<address>> field gives the offset in bytes from the base of
 140         the section data which owns the relocation record to the first
 141         byte of relocatable information. The actual data relocated
 142         will be relative to this point; for example, a relocation
 143         type which modifies the bottom two bytes of a four byte word
 144         would not touch the first byte pointed to in a big endian
 145         world.
 146
 147         o <<addend>>
 148
 149         The <<addend>> is a value provided by the back end to be added (!)
 150         to the relocation offset. Its interpretation is dependent upon
 151         the howto. For example, on the 68k the code:
 152
 153 |        char foo[];
 154 |        main()
 155 |                {
 156 |                return foo[0x12345678];
 157 |                }
 158
 159         Could be compiled into:
 160
 161 |        linkw fp,#-4
 162 |        moveb @@#12345678,d0
 163 |        extbl d0
 164 |        unlk fp
 165 |        rts
 166
 167         This could create a reloc pointing to <<foo>>, but leave the
 168         offset in the data, something like:
 169
 170 |RELOCATION RECORDS FOR [.text]:
 171 |offset   type      value
 172 |00000006 32        _foo
 173 |
 174 |00000000 4e56 fffc          ; linkw fp,#-4
 175 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 176 |0000000a 49c0               ; extbl d0
 177 |0000000c 4e5e               ; unlk fp
 178 |0000000e 4e75               ; rts
 179
 180         Using coff and an 88k, some instructions don't have enough
 181         space in them to represent the full address range, and
 182         pointers have to be loaded in two parts. So you'd get something like:
 183
 184 |        or.u     r13,r0,hi16(_foo+0x12345678)
 185 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 186 |        jmp      r1
 187
 188         This should create two relocs, both pointing to <<_foo>>, and with
 189         0x12340000 in their addend field. The data would consist of:
 190
 191 |RELOCATION RECORDS FOR [.text]:
 192 |offset   type      value
 193 |00000002 HVRT16    _foo+0x12340000
 194 |00000006 LVRT16    _foo+0x12340000
 195 |
 196 |00000000 5da05678           ; or.u r13,r0,0x5678
 197 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 198 |00000008 f400c001           ; jmp r1
 199
 200         The relocation routine digs out the value from the data, adds
 201         it to the addend to get the original offset, and then adds the
 202         value of <<_foo>>. Note that all 32 bits have to be kept around
 203         somewhere, to cope with carry from bit 15 to bit 16.
 204
 205         One further example is the sparc and the a.out format. The
 206         sparc has a similar problem to the 88k, in that some
 207         instructions don't have room for an entire offset, but on the
 208         sparc the parts are created in odd sized lumps. The designers of
 209         the a.out format chose to not use the data within the section
 210         for storing part of the offset; all the offset is kept within
 211         the reloc. Anything in the data should be ignored.
 212
 213 |        save %sp,-112,%sp
 214 |        sethi %hi(_foo+0x12345678),%g2
 215 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 216 |        ret
 217 |        restore
 218
 219         Both relocs contain a pointer to <<foo>>, and the offsets
 220         contain junk.
 221
 222 |RELOCATION RECORDS FOR [.text]:
 223 |offset   type      value
 224 |00000004 HI22      _foo+0x12345678
 225 |00000008 LO10      _foo+0x12345678
 226 |
 227 |00000000 9de3bf90     ; save %sp,-112,%sp
 228 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 229 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 230 |0000000c 81c7e008     ; ret
 231 |00000010 81e80000     ; restore
 232
 233         o <<howto>>
 234
 235         The <<howto>> field can be imagined as a
 236         relocation instruction. It is a pointer to a structure which
 237         contains information on what to do with all of the other
 238         information in the reloc record and data section. A back end
 239         would normally have a relocation instruction set and turn
 240         relocations into pointers to the correct structure on input -
 241         but it would be possible to create each howto field on demand.
 242
 243 */
 244
 245 /*
 246 SUBSUBSECTION
 247         <<enum complain_overflow>>
 248
 249         Indicates what sort of overflow checking should be done when
 250         performing a relocation.
 251
 252 CODE_FRAGMENT
 253 .
 254 .enum complain_overflow
 255 .{
 256 .  {* Do not complain on overflow.  *}
 257 .  complain_overflow_dont,
 258 .
 259 .  {* Complain if the value overflows when considered as a signed
 260 .     number one bit larger than the field.  ie. A bitfield of N bits
 261 .     is allowed to represent -2**n to 2**n-1.  *}
 262 .  complain_overflow_bitfield,
 263 .
 264 .  {* Complain if the value overflows when considered as a signed
 265 .     number.  *}
 266 .  complain_overflow_signed,
 267 .
 268 .  {* Complain if the value overflows when considered as an
 269 .     unsigned number.  *}
 270 .  complain_overflow_unsigned
 271 .};
 272
 273 */
 274
 275 /*
 276 SUBSUBSECTION
 277         <<reloc_howto_type>>
 278
 279         The <<reloc_howto_type>> is a structure which contains all the
 280         information that libbfd needs to know to tie up a back end's data.
 281
 282 CODE_FRAGMENT
 283 .struct bfd_symbol;             {* Forward declaration.  *}
 284 .
 285 .struct reloc_howto_struct
 286 .{
 287 .  {*  The type field has mainly a documentary use - the back end can
 288 .      do what it wants with it, though normally the back end's
 289 .      external idea of what a reloc number is stored
 290 .      in this field.  For example, a PC relative word relocation
 291 .      in a coff environment has the type 023 - because that's
 292 .      what the outside world calls a R_PCRWORD reloc.  *}
 293 .  unsigned int type;
 294 .
 295 .  {*  The value the final relocation is shifted right by.  This drops
 296 .      unwanted data from the relocation.  *}
 297 .  unsigned int rightshift;
 298 .
 299 .  {*  The size of the item to be relocated.  This is *not* a
 300 .      power-of-two measure.  To get the number of bytes operated
 301 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 302 .  int size;
 303 .
 304 .  {*  The number of bits in the item to be relocated.  This is used
 305 .      when doing overflow checking.  *}
 306 .  unsigned int bitsize;
 307 .
 308 .  {*  Notes that the relocation is relative to the location in the
 309 .      data section of the addend.  The relocation function will
 310 .      subtract from the relocation value the address of the location
 311 .      being relocated.  *}
 312 .  bfd_boolean pc_relative;
 313 .
 314 .  {*  The bit position of the reloc value in the destination.
 315 .      The relocated value is left shifted by this amount.  *}
 316 .  unsigned int bitpos;
 317 .
 318 .  {* What type of overflow error should be checked for when
 319 .     relocating.  *}
 320 .  enum complain_overflow complain_on_overflow;
 321 .
 322 .  {* If this field is non null, then the supplied function is
 323 .     called rather than the normal function.  This allows really
 324 .     strange relocation methods to be accommodated (e.g., i960 callj
 325 .     instructions).  *}
 326 .  bfd_reloc_status_type (*special_function)
 327 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 328 .     bfd *, char **);
 329 .
 330 .  {* The textual name of the relocation type.  *}
 331 .  char *name;
 332 .
 333 .  {* Some formats record a relocation addend in the section contents
 334 .     rather than with the relocation.  For ELF formats this is the
 335 .     distinction between USE_REL and USE_RELA (though the code checks
 336 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 337 .     addend is recorded with the section contents; when performing a
 338 .     partial link (ld -r) the section contents (the data) will be
 339 .     modified.  The value of this field is FALSE if addends are
 340 .     recorded with the relocation (in arelent.addend); when performing
 341 .     a partial link the relocation will be modified.
 342 .     All relocations for all ELF USE_RELA targets should set this field
 343 .     to FALSE (values of TRUE should be looked on with suspicion).
 344 .     However, the converse is not true: not all relocations of all ELF
 345 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 346 .     to each particular target.  For relocs that aren't used in partial
 347 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 348 .  bfd_boolean partial_inplace;
 349 .
 350 .  {* src_mask selects the part of the instruction (or data) to be used
 351 .     in the relocation sum.  If the target relocations don't have an
 352 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 353 .     dst_mask to extract the addend from the section contents.  If
 354 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 355 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 356 .     bogus as in those cases the value in the dst_mask part of the
 357 .     section contents should be treated as garbage.  *}
 358 .  bfd_vma src_mask;
 359 .
 360 .  {* dst_mask selects which parts of the instruction (or data) are
 361 .     replaced with a relocated value.  *}
 362 .  bfd_vma dst_mask;
 363 .
 364 .  {* When some formats create PC relative instructions, they leave
 365 .     the value of the pc of the place being relocated in the offset
 366 .     slot of the instruction, so that a PC relative relocation can
 367 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 368 .     Some formats leave the displacement part of an instruction
 369 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 370 .  bfd_boolean pcrel_offset;
 371 .};
 372 .
 373 */
 374
 375 /*
 376 FUNCTION
 377         The HOWTO Macro
 378
 379 DESCRIPTION
 380         The HOWTO define is horrible and will go away.
 381
 382 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 383 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 384
 385 DESCRIPTION
 386         And will be replaced with the totally magic way. But for the
 387         moment, we are compatible, so do it this way.
 388
 389 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 390 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 391 .         NAME, FALSE, 0, 0, IN)
 392 .
 393
 394 DESCRIPTION
 395         This is used to fill in an empty howto entry in an array.
 396
 397 .#define EMPTY_HOWTO(C) \
 398 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 399 .         NULL, FALSE, 0, 0, FALSE)
 400 .
 401
 402 DESCRIPTION
 403         Helper routine to turn a symbol into a relocation value.
 404
 405 .#define HOWTO_PREPARE(relocation, symbol)               \
 406 .  {                                                     \
 407 .    if (symbol != NULL)                                 \
 408 .      {                                                 \
 409 .        if (bfd_is_com_section (symbol->section))       \
 410 .          {                                             \
 411 .            relocation = 0;                             \
 412 .          }                                             \
 413 .        else                                            \
 414 .          {                                             \
 415 .            relocation = symbol->value;                 \
 416 .          }                                             \
 417 .      }                                                 \
 418 .  }
 419 .
 420 */
 421
 422 /*
 423 FUNCTION
 424         bfd_get_reloc_size
 425
 426 SYNOPSIS
 427         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 428
 429 DESCRIPTION
 430         For a reloc_howto_type that operates on a fixed number of bytes,
 431         this returns the number of bytes operated on.
 432  */
 433
 434 unsigned int
 435 bfd_get_reloc_size (reloc_howto_type *howto)
 436 {
 437   switch (howto->size)
 438     {
 439     case 0: return 1;
 440     case 1: return 2;
 441     case 2: return 4;
 442     case 3: return 0;
 443     case 4: return 8;
 444     case 8: return 16;
 445     case -2: return 4;
 446     default: abort ();
 447     }
 448 }
 449
 450 /*
 451 TYPEDEF
 452         arelent_chain
 453
 454 DESCRIPTION
 455
 456         How relocs are tied together in an <<asection>>:
 457
 458 .typedef struct relent_chain
 459 .{
 460 .  arelent relent;
 461 .  struct relent_chain *next;
 462 .}
 463 .arelent_chain;
 464 .
 465 */
 466
 467 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 468 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 469
 470 /*
 471 FUNCTION
 472         bfd_check_overflow
 473
 474 SYNOPSIS
 475         bfd_reloc_status_type bfd_check_overflow
 476           (enum complain_overflow how,
 477            unsigned int bitsize,
 478            unsigned int rightshift,
 479            unsigned int addrsize,
 480            bfd_vma relocation);
 481
 482 DESCRIPTION
 483         Perform overflow checking on @var{relocation} which has
 484         @var{bitsize} significant bits and will be shifted right by
 485         @var{rightshift} bits, on a machine with addresses containing
 486         @var{addrsize} significant bits.  The result is either of
 487         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 488
 489 */
 490
 491 bfd_reloc_status_type
 492 bfd_check_overflow (enum complain_overflow how,
 493                     unsigned int bitsize,
 494                     unsigned int rightshift,
 495                     unsigned int addrsize,
 496                     bfd_vma relocation)
 497 {
 498   bfd_vma fieldmask, addrmask, signmask, ss, a;
 499   bfd_reloc_status_type flag = bfd_reloc_ok;
 500
 501   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 502      we'll be permissive: extra bits in the field mask will
 503      automatically extend the address mask for purposes of the
 504      overflow check.  */
 505   fieldmask = N_ONES (bitsize);
 506   signmask = ~fieldmask;
 507   addrmask = N_ONES (addrsize) | fieldmask;
 508   a = (relocation & addrmask) >> rightshift;;
 509
 510   switch (how)
 511     {
 512     case complain_overflow_dont:
 513       break;
 514
 515     case complain_overflow_signed:
 516       /* If any sign bits are set, all sign bits must be set.  That
 517          is, A must be a valid negative address after shifting.  */
 518       signmask = ~ (fieldmask >> 1);
 519       /* Fall thru */
 520
 521     case complain_overflow_bitfield:
 522       /* Bitfields are sometimes signed, sometimes unsigned.  We
 523          explicitly allow an address wrap too, which means a bitfield
 524          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 525          if the value has some, but not all, bits set outside the
 526          field.  */
 527       ss = a & signmask;
 528       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 529         flag = bfd_reloc_overflow;
 530       break;
 531
 532     case complain_overflow_unsigned:
 533       /* We have an overflow if the address does not fit in the field.  */
 534       if ((a & signmask) != 0)
 535         flag = bfd_reloc_overflow;
 536       break;
 537
 538     default:
 539       abort ();
 540     }
 541
 542   return flag;
 543 }
 544
 545 /*
 546 FUNCTION
 547         bfd_perform_relocation
 548
 549 SYNOPSIS
 550         bfd_reloc_status_type bfd_perform_relocation
 551           (bfd *abfd,
 552            arelent *reloc_entry,
 553            void *data,
 554            asection *input_section,
 555            bfd *output_bfd,
 556            char **error_message);
 557
 558 DESCRIPTION
 559         If @var{output_bfd} is supplied to this function, the
 560         generated image will be relocatable; the relocations are
 561         copied to the output file after they have been changed to
 562         reflect the new state of the world. There are two ways of
 563         reflecting the results of partial linkage in an output file:
 564         by modifying the output data in place, and by modifying the
 565         relocation record.  Some native formats (e.g., basic a.out and
 566         basic coff) have no way of specifying an addend in the
 567         relocation type, so the addend has to go in the output data.
 568         This is no big deal since in these formats the output data
 569         slot will always be big enough for the addend. Complex reloc
 570         types with addends were invented to solve just this problem.
 571         The @var{error_message} argument is set to an error message if
 572         this return @code{bfd_reloc_dangerous}.
 573
 574 */
 575
 576 bfd_reloc_status_type
 577 bfd_perform_relocation (bfd *abfd,
 578                         arelent *reloc_entry,
 579                         void *data,
 580                         asection *input_section,
 581                         bfd *output_bfd,
 582                         char **error_message)
 583 {
 584   bfd_vma relocation;
 585   bfd_reloc_status_type flag = bfd_reloc_ok;
 586   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 587   bfd_vma output_base = 0;
 588   reloc_howto_type *howto = reloc_entry->howto;
 589   asection *reloc_target_output_section;
 590   asymbol *symbol;
 591
 592   symbol = *(reloc_entry->sym_ptr_ptr);
 593   if (bfd_is_abs_section (symbol->section)
 594       && output_bfd != NULL)
 595     {
 596       reloc_entry->address += input_section->output_offset;
 597       return bfd_reloc_ok;
 598     }
 599
 600   /* If we are not producing relocatable output, return an error if
 601      the symbol is not defined.  An undefined weak symbol is
 602      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 603   if (bfd_is_und_section (symbol->section)
 604       && (symbol->flags & BSF_WEAK) == 0
 605       && output_bfd == NULL)
 606     flag = bfd_reloc_undefined;
 607
 608   /* If there is a function supplied to handle this relocation type,
 609      call it.  It'll return `bfd_reloc_continue' if further processing
 610      can be done.  */
 611   if (howto->special_function)
 612     {
 613       bfd_reloc_status_type cont;
 614       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 615                                       input_section, output_bfd,
 616                                       error_message);
 617       if (cont != bfd_reloc_continue)
 618         return cont;
 619     }
 620
 621   /* Is the address of the relocation really within the section?  */
 622   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 623     return bfd_reloc_outofrange;
 624
 625   /* Work out which section the relocation is targeted at and the
 626      initial relocation command value.  */
 627
 628   /* Get symbol value.  (Common symbols are special.)  */
 629   if (bfd_is_com_section (symbol->section))
 630     relocation = 0;
 631   else
 632     relocation = symbol->value;
 633
 634   reloc_target_output_section = symbol->section->output_section;
 635
 636   /* Convert input-section-relative symbol value to absolute.  */
 637   if ((output_bfd && ! howto->partial_inplace)
 638       || reloc_target_output_section == NULL)
 639     output_base = 0;
 640   else
 641     output_base = reloc_target_output_section->vma;
 642
 643   relocation += output_base + symbol->section->output_offset;
 644
 645   /* Add in supplied addend.  */
 646   relocation += reloc_entry->addend;
 647
 648   /* Here the variable relocation holds the final address of the
 649      symbol we are relocating against, plus any addend.  */
 650
 651   if (howto->pc_relative)
 652     {
 653       /* This is a PC relative relocation.  We want to set RELOCATION
 654          to the distance between the address of the symbol and the
 655          location.  RELOCATION is already the address of the symbol.
 656
 657          We start by subtracting the address of the section containing
 658          the location.
 659
 660          If pcrel_offset is set, we must further subtract the position
 661          of the location within the section.  Some targets arrange for
 662          the addend to be the negative of the position of the location
 663          within the section; for example, i386-aout does this.  For
 664          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 665          include the position of the location; for example, m88kbcs,
 666          or ELF.  For those targets, pcrel_offset is TRUE.
 667
 668          If we are producing relocatable output, then we must ensure
 669          that this reloc will be correctly computed when the final
 670          relocation is done.  If pcrel_offset is FALSE we want to wind
 671          up with the negative of the location within the section,
 672          which means we must adjust the existing addend by the change
 673          in the location within the section.  If pcrel_offset is TRUE
 674          we do not want to adjust the existing addend at all.
 675
 676          FIXME: This seems logical to me, but for the case of
 677          producing relocatable output it is not what the code
 678          actually does.  I don't want to change it, because it seems
 679          far too likely that something will break.  */
 680
 681       relocation -=
 682         input_section->output_section->vma + input_section->output_offset;
 683
 684       if (howto->pcrel_offset)
 685         relocation -= reloc_entry->address;
 686     }
 687
 688   if (output_bfd != NULL)
 689     {
 690       if (! howto->partial_inplace)
 691         {
 692           /* This is a partial relocation, and we want to apply the relocation
 693              to the reloc entry rather than the raw data. Modify the reloc
 694              inplace to reflect what we now know.  */
 695           reloc_entry->addend = relocation;
 696           reloc_entry->address += input_section->output_offset;
 697           return flag;
 698         }
 699       else
 700         {
 701           /* This is a partial relocation, but inplace, so modify the
 702              reloc record a bit.
 703
 704              If we've relocated with a symbol with a section, change
 705              into a ref to the section belonging to the symbol.  */
 706
 707           reloc_entry->address += input_section->output_offset;
 708
 709           /* WTF?? */
 710           if (abfd->xvec->flavour == bfd_target_coff_flavour
 711               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 712               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 713             {
 714               /* For m68k-coff, the addend was being subtracted twice during
 715                  relocation with -r.  Removing the line below this comment
 716                  fixes that problem; see PR 2953.
 717
 718 However, Ian wrote the following, regarding removing the line below,
 719 which explains why it is still enabled:  --djm
 720
 721 If you put a patch like that into BFD you need to check all the COFF
 722 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 723 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 724 problem in a different way.  There may very well be a reason that the
 725 code works as it does.
 726
 727 Hmmm.  The first obvious point is that bfd_perform_relocation should
 728 not have any tests that depend upon the flavour.  It's seem like
 729 entirely the wrong place for such a thing.  The second obvious point
 730 is that the current code ignores the reloc addend when producing
 731 relocatable output for COFF.  That's peculiar.  In fact, I really
 732 have no idea what the point of the line you want to remove is.
 733
 734 A typical COFF reloc subtracts the old value of the symbol and adds in
 735 the new value to the location in the object file (if it's a pc
 736 relative reloc it adds the difference between the symbol value and the
 737 location).  When relocating we need to preserve that property.
 738
 739 BFD handles this by setting the addend to the negative of the old
 740 value of the symbol.  Unfortunately it handles common symbols in a
 741 non-standard way (it doesn't subtract the old value) but that's a
 742 different story (we can't change it without losing backward
 743 compatibility with old object files) (coff-i386 does subtract the old
 744 value, to be compatible with existing coff-i386 targets, like SCO).
 745
 746 So everything works fine when not producing relocatable output.  When
 747 we are producing relocatable output, logically we should do exactly
 748 what we do when not producing relocatable output.  Therefore, your
 749 patch is correct.  In fact, it should probably always just set
 750 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 751 add the value into the object file.  This won't hurt the COFF code,
 752 which doesn't use the addend; I'm not sure what it will do to other
 753 formats (the thing to check for would be whether any formats both use
 754 the addend and set partial_inplace).
 755
 756 When I wanted to make coff-i386 produce relocatable output, I ran
 757 into the problem that you are running into: I wanted to remove that
 758 line.  Rather than risk it, I made the coff-i386 relocs use a special
 759 function; it's coff_i386_reloc in coff-i386.c.  The function
 760 specifically adds the addend field into the object file, knowing that
 761 bfd_perform_relocation is not going to.  If you remove that line, then
 762 coff-i386.c will wind up adding the addend field in twice.  It's
 763 trivial to fix; it just needs to be done.
 764
 765 The problem with removing the line is just that it may break some
 766 working code.  With BFD it's hard to be sure of anything.  The right
 767 way to deal with this is simply to build and test at least all the
 768 supported COFF targets.  It should be straightforward if time and disk
 769 space consuming.  For each target:
 770     1) build the linker
 771     2) generate some executable, and link it using -r (I would
 772        probably use paranoia.o and link against newlib/libc.a, which
 773        for all the supported targets would be available in
 774        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 775     3) make the change to reloc.c
 776     4) rebuild the linker
 777     5) repeat step 2
 778     6) if the resulting object files are the same, you have at least
 779        made it no worse
 780     7) if they are different you have to figure out which version is
 781        right
 782 */
 783               relocation -= reloc_entry->addend;
 784               reloc_entry->addend = 0;
 785             }
 786           else
 787             {
 788               reloc_entry->addend = relocation;
 789             }
 790         }
 791     }
 792   else
 793     {
 794       reloc_entry->addend = 0;
 795     }
 796
 797   /* FIXME: This overflow checking is incomplete, because the value
 798      might have overflowed before we get here.  For a correct check we
 799      need to compute the value in a size larger than bitsize, but we
 800      can't reasonably do that for a reloc the same size as a host
 801      machine word.
 802      FIXME: We should also do overflow checking on the result after
 803      adding in the value contained in the object file.  */
 804   if (howto->complain_on_overflow != complain_overflow_dont
 805       && flag == bfd_reloc_ok)
 806     flag = bfd_check_overflow (howto->complain_on_overflow,
 807                                howto->bitsize,
 808                                howto->rightshift,
 809                                bfd_arch_bits_per_address (abfd),
 810                                relocation);
 811
 812   /* Either we are relocating all the way, or we don't want to apply
 813      the relocation to the reloc entry (probably because there isn't
 814      any room in the output format to describe addends to relocs).  */
 815
 816   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 817      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 818      following program:
 819
 820      struct str
 821      {
 822        unsigned int i0;
 823      } s = { 0 };
 824
 825      int
 826      main ()
 827      {
 828        unsigned long x;
 829
 830        x = 0x100000000;
 831        x <<= (unsigned long) s.i0;
 832        if (x == 0)
 833          printf ("failed\n");
 834        else
 835          printf ("succeeded (%lx)\n", x);
 836      }
 837      */
 838
 839   relocation >>= (bfd_vma) howto->rightshift;
 840
 841   /* Shift everything up to where it's going to be used.  */
 842   relocation <<= (bfd_vma) howto->bitpos;
 843
 844   /* Wait for the day when all have the mask in them.  */
 845
 846   /* What we do:
 847      i instruction to be left alone
 848      o offset within instruction
 849      r relocation offset to apply
 850      S src mask
 851      D dst mask
 852      N ~dst mask
 853      A part 1
 854      B part 2
 855      R result
 856
 857      Do this:
 858      ((  i i i i i o o o o o  from bfd_get<size>
 859      and           S S S S S) to get the size offset we want
 860      +   r r r r r r r r r r) to get the final value to place
 861      and           D D D D D  to chop to right size
 862      -----------------------
 863      =             A A A A A
 864      And this:
 865      (   i i i i i o o o o o  from bfd_get<size>
 866      and N N N N N          ) get instruction
 867      -----------------------
 868      =   B B B B B
 869
 870      And then:
 871      (   B B B B B
 872      or            A A A A A)
 873      -----------------------
 874      =   R R R R R R R R R R  put into bfd_put<size>
 875      */
 876
 877 #define DOIT(x) \
 878   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 879
 880   switch (howto->size)
 881     {
 882     case 0:
 883       {
 884         char x = bfd_get_8 (abfd, (char *) data + octets);
 885         DOIT (x);
 886         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 887       }
 888       break;
 889
 890     case 1:
 891       {
 892         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 893         DOIT (x);
 894         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 895       }
 896       break;
 897     case 2:
 898       {
 899         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 900         DOIT (x);
 901         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 902       }
 903       break;
 904     case -2:
 905       {
 906         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case -1:
 914       {
 915         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 916         relocation = -relocation;
 917         DOIT (x);
 918         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 919       }
 920       break;
 921
 922     case 3:
 923       /* Do nothing */
 924       break;
 925
 926     case 4:
 927 #ifdef BFD64
 928       {
 929         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 930         DOIT (x);
 931         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 932       }
 933 #else
 934       abort ();
 935 #endif
 936       break;
 937     default:
 938       return bfd_reloc_other;
 939     }
 940
 941   return flag;
 942 }
 943
 944 /*
 945 FUNCTION
 946         bfd_install_relocation
 947
 948 SYNOPSIS
 949         bfd_reloc_status_type bfd_install_relocation
 950           (bfd *abfd,
 951            arelent *reloc_entry,
 952            void *data, bfd_vma data_start,
 953            asection *input_section,
 954            char **error_message);
 955
 956 DESCRIPTION
 957         This looks remarkably like <<bfd_perform_relocation>>, except it
 958         does not expect that the section contents have been filled in.
 959         I.e., it's suitable for use when creating, rather than applying
 960         a relocation.
 961
 962         For now, this function should be considered reserved for the
 963         assembler.
 964 */
 965
 966 bfd_reloc_status_type
 967 bfd_install_relocation (bfd *abfd,
 968                         arelent *reloc_entry,
 969                         void *data_start,
 970                         bfd_vma data_start_offset,
 971                         asection *input_section,
 972                         char **error_message)
 973 {
 974   bfd_vma relocation;
 975   bfd_reloc_status_type flag = bfd_reloc_ok;
 976   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 977   bfd_vma output_base = 0;
 978   reloc_howto_type *howto = reloc_entry->howto;
 979   asection *reloc_target_output_section;
 980   asymbol *symbol;
 981   bfd_byte *data;
 982
 983   symbol = *(reloc_entry->sym_ptr_ptr);
 984   if (bfd_is_abs_section (symbol->section))
 985     {
 986       reloc_entry->address += input_section->output_offset;
 987       return bfd_reloc_ok;
 988     }
 989
 990   /* If there is a function supplied to handle this relocation type,
 991      call it.  It'll return `bfd_reloc_continue' if further processing
 992      can be done.  */
 993   if (howto->special_function)
 994     {
 995       bfd_reloc_status_type cont;
 996
 997       /* XXX - The special_function calls haven't been fixed up to deal
 998          with creating new relocations and section contents.  */
 999       cont = howto->special_function (abfd, reloc_entry, symbol,
1000                                       /* XXX - Non-portable! */
1001                                       ((bfd_byte *) data_start
1002                                        - data_start_offset),
1003                                       input_section, abfd, error_message);
1004       if (cont != bfd_reloc_continue)
1005         return cont;
1006     }
1007
1008   /* Is the address of the relocation really within the section?  */
1009   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1010     return bfd_reloc_outofrange;
1011
1012   /* Work out which section the relocation is targeted at and the
1013      initial relocation command value.  */
1014
1015   /* Get symbol value.  (Common symbols are special.)  */
1016   if (bfd_is_com_section (symbol->section))
1017     relocation = 0;
1018   else
1019     relocation = symbol->value;
1020
1021   reloc_target_output_section = symbol->section->output_section;
1022
1023   /* Convert input-section-relative symbol value to absolute.  */
1024   if (! howto->partial_inplace)
1025     output_base = 0;
1026   else
1027     output_base = reloc_target_output_section->vma;
1028
1029   relocation += output_base + symbol->section->output_offset;
1030
1031   /* Add in supplied addend.  */
1032   relocation += reloc_entry->addend;
1033
1034   /* Here the variable relocation holds the final address of the
1035      symbol we are relocating against, plus any addend.  */
1036
1037   if (howto->pc_relative)
1038     {
1039       /* This is a PC relative relocation.  We want to set RELOCATION
1040          to the distance between the address of the symbol and the
1041          location.  RELOCATION is already the address of the symbol.
1042
1043          We start by subtracting the address of the section containing
1044          the location.
1045
1046          If pcrel_offset is set, we must further subtract the position
1047          of the location within the section.  Some targets arrange for
1048          the addend to be the negative of the position of the location
1049          within the section; for example, i386-aout does this.  For
1050          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1051          include the position of the location; for example, m88kbcs,
1052          or ELF.  For those targets, pcrel_offset is TRUE.
1053
1054          If we are producing relocatable output, then we must ensure
1055          that this reloc will be correctly computed when the final
1056          relocation is done.  If pcrel_offset is FALSE we want to wind
1057          up with the negative of the location within the section,
1058          which means we must adjust the existing addend by the change
1059          in the location within the section.  If pcrel_offset is TRUE
1060          we do not want to adjust the existing addend at all.
1061
1062          FIXME: This seems logical to me, but for the case of
1063          producing relocatable output it is not what the code
1064          actually does.  I don't want to change it, because it seems
1065          far too likely that something will break.  */
1066
1067       relocation -=
1068         input_section->output_section->vma + input_section->output_offset;
1069
1070       if (howto->pcrel_offset && howto->partial_inplace)
1071         relocation -= reloc_entry->address;
1072     }
1073
1074   if (! howto->partial_inplace)
1075     {
1076       /* This is a partial relocation, and we want to apply the relocation
1077          to the reloc entry rather than the raw data. Modify the reloc
1078          inplace to reflect what we now know.  */
1079       reloc_entry->addend = relocation;
1080       reloc_entry->address += input_section->output_offset;
1081       return flag;
1082     }
1083   else
1084     {
1085       /* This is a partial relocation, but inplace, so modify the
1086          reloc record a bit.
1087
1088          If we've relocated with a symbol with a section, change
1089          into a ref to the section belonging to the symbol.  */
1090       reloc_entry->address += input_section->output_offset;
1091
1092       /* WTF?? */
1093       if (abfd->xvec->flavour == bfd_target_coff_flavour
1094           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1095           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1096         {
1097
1098           /* For m68k-coff, the addend was being subtracted twice during
1099              relocation with -r.  Removing the line below this comment
1100              fixes that problem; see PR 2953.
1101
1102 However, Ian wrote the following, regarding removing the line below,
1103 which explains why it is still enabled:  --djm
1104
1105 If you put a patch like that into BFD you need to check all the COFF
1106 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1107 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1108 problem in a different way.  There may very well be a reason that the
1109 code works as it does.
1110
1111 Hmmm.  The first obvious point is that bfd_install_relocation should
1112 not have any tests that depend upon the flavour.  It's seem like
1113 entirely the wrong place for such a thing.  The second obvious point
1114 is that the current code ignores the reloc addend when producing
1115 relocatable output for COFF.  That's peculiar.  In fact, I really
1116 have no idea what the point of the line you want to remove is.
1117
1118 A typical COFF reloc subtracts the old value of the symbol and adds in
1119 the new value to the location in the object file (if it's a pc
1120 relative reloc it adds the difference between the symbol value and the
1121 location).  When relocating we need to preserve that property.
1122
1123 BFD handles this by setting the addend to the negative of the old
1124 value of the symbol.  Unfortunately it handles common symbols in a
1125 non-standard way (it doesn't subtract the old value) but that's a
1126 different story (we can't change it without losing backward
1127 compatibility with old object files) (coff-i386 does subtract the old
1128 value, to be compatible with existing coff-i386 targets, like SCO).
1129
1130 So everything works fine when not producing relocatable output.  When
1131 we are producing relocatable output, logically we should do exactly
1132 what we do when not producing relocatable output.  Therefore, your
1133 patch is correct.  In fact, it should probably always just set
1134 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1135 add the value into the object file.  This won't hurt the COFF code,
1136 which doesn't use the addend; I'm not sure what it will do to other
1137 formats (the thing to check for would be whether any formats both use
1138 the addend and set partial_inplace).
1139
1140 When I wanted to make coff-i386 produce relocatable output, I ran
1141 into the problem that you are running into: I wanted to remove that
1142 line.  Rather than risk it, I made the coff-i386 relocs use a special
1143 function; it's coff_i386_reloc in coff-i386.c.  The function
1144 specifically adds the addend field into the object file, knowing that
1145 bfd_install_relocation is not going to.  If you remove that line, then
1146 coff-i386.c will wind up adding the addend field in twice.  It's
1147 trivial to fix; it just needs to be done.
1148
1149 The problem with removing the line is just that it may break some
1150 working code.  With BFD it's hard to be sure of anything.  The right
1151 way to deal with this is simply to build and test at least all the
1152 supported COFF targets.  It should be straightforward if time and disk
1153 space consuming.  For each target:
1154     1) build the linker
1155     2) generate some executable, and link it using -r (I would
1156        probably use paranoia.o and link against newlib/libc.a, which
1157        for all the supported targets would be available in
1158        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1159     3) make the change to reloc.c
1160     4) rebuild the linker
1161     5) repeat step 2
1162     6) if the resulting object files are the same, you have at least
1163        made it no worse
1164     7) if they are different you have to figure out which version is
1165        right.  */
1166           relocation -= reloc_entry->addend;
1167           /* FIXME: There should be no target specific code here...  */
1168           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1169             reloc_entry->addend = 0;
1170         }
1171       else
1172         {
1173           reloc_entry->addend = relocation;
1174         }
1175     }
1176
1177   /* FIXME: This overflow checking is incomplete, because the value
1178      might have overflowed before we get here.  For a correct check we
1179      need to compute the value in a size larger than bitsize, but we
1180      can't reasonably do that for a reloc the same size as a host
1181      machine word.
1182      FIXME: We should also do overflow checking on the result after
1183      adding in the value contained in the object file.  */
1184   if (howto->complain_on_overflow != complain_overflow_dont)
1185     flag = bfd_check_overflow (howto->complain_on_overflow,
1186                                howto->bitsize,
1187                                howto->rightshift,
1188                                bfd_arch_bits_per_address (abfd),
1189                                relocation);
1190
1191   /* Either we are relocating all the way, or we don't want to apply
1192      the relocation to the reloc entry (probably because there isn't
1193      any room in the output format to describe addends to relocs).  */
1194
1195   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1196      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1197      following program:
1198
1199      struct str
1200      {
1201        unsigned int i0;
1202      } s = { 0 };
1203
1204      int
1205      main ()
1206      {
1207        unsigned long x;
1208
1209        x = 0x100000000;
1210        x <<= (unsigned long) s.i0;
1211        if (x == 0)
1212          printf ("failed\n");
1213        else
1214          printf ("succeeded (%lx)\n", x);
1215      }
1216      */
1217
1218   relocation >>= (bfd_vma) howto->rightshift;
1219
1220   /* Shift everything up to where it's going to be used.  */
1221   relocation <<= (bfd_vma) howto->bitpos;
1222
1223   /* Wait for the day when all have the mask in them.  */
1224
1225   /* What we do:
1226      i instruction to be left alone
1227      o offset within instruction
1228      r relocation offset to apply
1229      S src mask
1230      D dst mask
1231      N ~dst mask
1232      A part 1
1233      B part 2
1234      R result
1235
1236      Do this:
1237      ((  i i i i i o o o o o  from bfd_get<size>
1238      and           S S S S S) to get the size offset we want
1239      +   r r r r r r r r r r) to get the final value to place
1240      and           D D D D D  to chop to right size
1241      -----------------------
1242      =             A A A A A
1243      And this:
1244      (   i i i i i o o o o o  from bfd_get<size>
1245      and N N N N N          ) get instruction
1246      -----------------------
1247      =   B B B B B
1248
1249      And then:
1250      (   B B B B B
1251      or            A A A A A)
1252      -----------------------
1253      =   R R R R R R R R R R  put into bfd_put<size>
1254      */
1255
1256 #define DOIT(x) \
1257   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1258
1259   data = (bfd_byte *) data_start + (octets - data_start_offset);
1260
1261   switch (howto->size)
1262     {
1263     case 0:
1264       {
1265         char x = bfd_get_8 (abfd, data);
1266         DOIT (x);
1267         bfd_put_8 (abfd, x, data);
1268       }
1269       break;
1270
1271     case 1:
1272       {
1273         short x = bfd_get_16 (abfd, data);
1274         DOIT (x);
1275         bfd_put_16 (abfd, (bfd_vma) x, data);
1276       }
1277       break;
1278     case 2:
1279       {
1280         long x = bfd_get_32 (abfd, data);
1281         DOIT (x);
1282         bfd_put_32 (abfd, (bfd_vma) x, data);
1283       }
1284       break;
1285     case -2:
1286       {
1287         long x = bfd_get_32 (abfd, data);
1288         relocation = -relocation;
1289         DOIT (x);
1290         bfd_put_32 (abfd, (bfd_vma) x, data);
1291       }
1292       break;
1293
1294     case 3:
1295       /* Do nothing */
1296       break;
1297
1298     case 4:
1299       {
1300         bfd_vma x = bfd_get_64 (abfd, data);
1301         DOIT (x);
1302         bfd_put_64 (abfd, x, data);
1303       }
1304       break;
1305     default:
1306       return bfd_reloc_other;
1307     }
1308
1309   return flag;
1310 }
1311
1312 /* This relocation routine is used by some of the backend linkers.
1313    They do not construct asymbol or arelent structures, so there is no
1314    reason for them to use bfd_perform_relocation.  Also,
1315    bfd_perform_relocation is so hacked up it is easier to write a new
1316    function than to try to deal with it.
1317
1318    This routine does a final relocation.  Whether it is useful for a
1319    relocatable link depends upon how the object format defines
1320    relocations.
1321
1322    FIXME: This routine ignores any special_function in the HOWTO,
1323    since the existing special_function values have been written for
1324    bfd_perform_relocation.
1325
1326    HOWTO is the reloc howto information.
1327    INPUT_BFD is the BFD which the reloc applies to.
1328    INPUT_SECTION is the section which the reloc applies to.
1329    CONTENTS is the contents of the section.
1330    ADDRESS is the address of the reloc within INPUT_SECTION.
1331    VALUE is the value of the symbol the reloc refers to.
1332    ADDEND is the addend of the reloc.  */
1333
1334 bfd_reloc_status_type
1335 _bfd_final_link_relocate (reloc_howto_type *howto,
1336                           bfd *input_bfd,
1337                           asection *input_section,
1338                           bfd_byte *contents,
1339                           bfd_vma address,
1340                           bfd_vma value,
1341                           bfd_vma addend)
1342 {
1343   bfd_vma relocation;
1344
1345   /* Sanity check the address.  */
1346   if (address > bfd_get_section_limit (input_bfd, input_section))
1347     return bfd_reloc_outofrange;
1348
1349   /* This function assumes that we are dealing with a basic relocation
1350      against a symbol.  We want to compute the value of the symbol to
1351      relocate to.  This is just VALUE, the value of the symbol, plus
1352      ADDEND, any addend associated with the reloc.  */
1353   relocation = value + addend;
1354
1355   /* If the relocation is PC relative, we want to set RELOCATION to
1356      the distance between the symbol (currently in RELOCATION) and the
1357      location we are relocating.  Some targets (e.g., i386-aout)
1358      arrange for the contents of the section to be the negative of the
1359      offset of the location within the section; for such targets
1360      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1361      simply leave the contents of the section as zero; for such
1362      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1363      need to subtract out the offset of the location within the
1364      section (which is just ADDRESS).  */
1365   if (howto->pc_relative)
1366     {
1367       relocation -= (input_section->output_section->vma
1368                      + input_section->output_offset);
1369       if (howto->pcrel_offset)
1370         relocation -= address;
1371     }
1372
1373   return _bfd_relocate_contents (howto, input_bfd, relocation,
1374                                  contents + address);
1375 }
1376
1377 /* Relocate a given location using a given value and howto.  */
1378
1379 bfd_reloc_status_type
1380 _bfd_relocate_contents (reloc_howto_type *howto,
1381                         bfd *input_bfd,
1382                         bfd_vma relocation,
1383                         bfd_byte *location)
1384 {
1385   int size;
1386   bfd_vma x = 0;
1387   bfd_reloc_status_type flag;
1388   unsigned int rightshift = howto->rightshift;
1389   unsigned int bitpos = howto->bitpos;
1390
1391   /* If the size is negative, negate RELOCATION.  This isn't very
1392      general.  */
1393   if (howto->size < 0)
1394     relocation = -relocation;
1395
1396   /* Get the value we are going to relocate.  */
1397   size = bfd_get_reloc_size (howto);
1398   switch (size)
1399     {
1400     default:
1401     case 0:
1402       abort ();
1403     case 1:
1404       x = bfd_get_8 (input_bfd, location);
1405       break;
1406     case 2:
1407       x = bfd_get_16 (input_bfd, location);
1408       break;
1409     case 4:
1410       x = bfd_get_32 (input_bfd, location);
1411       break;
1412     case 8:
1413 #ifdef BFD64
1414       x = bfd_get_64 (input_bfd, location);
1415 #else
1416       abort ();
1417 #endif
1418       break;
1419     }
1420
1421   /* Check for overflow.  FIXME: We may drop bits during the addition
1422      which we don't check for.  We must either check at every single
1423      operation, which would be tedious, or we must do the computations
1424      in a type larger than bfd_vma, which would be inefficient.  */
1425   flag = bfd_reloc_ok;
1426   if (howto->complain_on_overflow != complain_overflow_dont)
1427     {
1428       bfd_vma addrmask, fieldmask, signmask, ss;
1429       bfd_vma a, b, sum;
1430
1431       /* Get the values to be added together.  For signed and unsigned
1432          relocations, we assume that all values should be truncated to
1433          the size of an address.  For bitfields, all the bits matter.
1434          See also bfd_check_overflow.  */
1435       fieldmask = N_ONES (howto->bitsize);
1436       signmask = ~fieldmask;
1437       addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
1438       a = (relocation & addrmask) >> rightshift;
1439       b = (x & howto->src_mask & addrmask) >> bitpos;
1440
1441       switch (howto->complain_on_overflow)
1442         {
1443         case complain_overflow_signed:
1444           /* If any sign bits are set, all sign bits must be set.
1445              That is, A must be a valid negative address after
1446              shifting.  */
1447           signmask = ~(fieldmask >> 1);
1448           /* Fall thru */
1449
1450         case complain_overflow_bitfield:
1451           /* Much like the signed check, but for a field one bit
1452              wider.  We allow a bitfield to represent numbers in the
1453              range -2**n to 2**n-1, where n is the number of bits in the
1454              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1455              can't overflow, which is exactly what we want.  */
1456           ss = a & signmask;
1457           if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
1458             flag = bfd_reloc_overflow;
1459
1460           /* We only need this next bit of code if the sign bit of B
1461              is below the sign bit of A.  This would only happen if
1462              SRC_MASK had fewer bits than BITSIZE.  Note that if
1463              SRC_MASK has more bits than BITSIZE, we can get into
1464              trouble; we would need to verify that B is in range, as
1465              we do for A above.  */
1466           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1467           ss >>= bitpos;
1468
1469           /* Set all the bits above the sign bit.  */
1470           b = (b ^ ss) - ss;
1471
1472           /* Now we can do the addition.  */
1473           sum = a + b;
1474
1475           /* See if the result has the correct sign.  Bits above the
1476              sign bit are junk now; ignore them.  If the sum is
1477              positive, make sure we did not have all negative inputs;
1478              if the sum is negative, make sure we did not have all
1479              positive inputs.  The test below looks only at the sign
1480              bits, and it really just
1481                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1482
1483              We mask with addrmask here to explicitly allow an address
1484              wrap-around.  The Linux kernel relies on it, and it is
1485              the only way to write assembler code which can run when
1486              loaded at a location 0x80000000 away from the location at
1487              which it is linked.  */
1488           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1489             flag = bfd_reloc_overflow;
1490           break;
1491
1492         case complain_overflow_unsigned:
1493           /* Checking for an unsigned overflow is relatively easy:
1494              trim the addresses and add, and trim the result as well.
1495              Overflow is normally indicated when the result does not
1496              fit in the field.  However, we also need to consider the
1497              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1498              input is 0x80000000, and bfd_vma is only 32 bits; then we
1499              will get sum == 0, but there is an overflow, since the
1500              inputs did not fit in the field.  Instead of doing a
1501              separate test, we can check for this by or-ing in the
1502              operands when testing for the sum overflowing its final
1503              field.  */
1504           sum = (a + b) & addrmask;
1505           if ((a | b | sum) & signmask)
1506             flag = bfd_reloc_overflow;
1507           break;
1508
1509         default:
1510           abort ();
1511         }
1512     }
1513
1514   /* Put RELOCATION in the right bits.  */
1515   relocation >>= (bfd_vma) rightshift;
1516   relocation <<= (bfd_vma) bitpos;
1517
1518   /* Add RELOCATION to the right bits of X.  */
1519   x = ((x & ~howto->dst_mask)
1520        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1521
1522   /* Put the relocated value back in the object file.  */
1523   switch (size)
1524     {
1525     default:
1526       abort ();
1527     case 1:
1528       bfd_put_8 (input_bfd, x, location);
1529       break;
1530     case 2:
1531       bfd_put_16 (input_bfd, x, location);
1532       break;
1533     case 4:
1534       bfd_put_32 (input_bfd, x, location);
1535       break;
1536     case 8:
1537 #ifdef BFD64
1538       bfd_put_64 (input_bfd, x, location);
1539 #else
1540       abort ();
1541 #endif
1542       break;
1543     }
1544
1545   return flag;
1546 }
1547
1548 /* Clear a given location using a given howto, by applying a relocation value
1549    of zero and discarding any in-place addend.  This is used for fixed-up
1550    relocations against discarded symbols, to make ignorable debug or unwind
1551    information more obvious.  */
1552
1553 void
1554 _bfd_clear_contents (reloc_howto_type *howto,
1555                      bfd *input_bfd,
1556                      bfd_byte *location)
1557 {
1558   int size;
1559   bfd_vma x = 0;
1560
1561   /* Get the value we are going to relocate.  */
1562   size = bfd_get_reloc_size (howto);
1563   switch (size)
1564     {
1565     default:
1566     case 0:
1567       abort ();
1568     case 1:
1569       x = bfd_get_8 (input_bfd, location);
1570       break;
1571     case 2:
1572       x = bfd_get_16 (input_bfd, location);
1573       break;
1574     case 4:
1575       x = bfd_get_32 (input_bfd, location);
1576       break;
1577     case 8:
1578 #ifdef BFD64
1579       x = bfd_get_64 (input_bfd, location);
1580 #else
1581       abort ();
1582 #endif
1583       break;
1584     }
1585
1586   /* Zero out the unwanted bits of X.  */
1587   x &= ~howto->dst_mask;
1588
1589   /* Put the relocated value back in the object file.  */
1590   switch (size)
1591     {
1592     default:
1593     case 0:
1594       abort ();
1595     case 1:
1596       bfd_put_8 (input_bfd, x, location);
1597       break;
1598     case 2:
1599       bfd_put_16 (input_bfd, x, location);
1600       break;
1601     case 4:
1602       bfd_put_32 (input_bfd, x, location);
1603       break;
1604     case 8:
1605 #ifdef BFD64
1606       bfd_put_64 (input_bfd, x, location);
1607 #else
1608       abort ();
1609 #endif
1610       break;
1611     }
1612 }
1613
1614 /*
1615 DOCDD
1616 INODE
1617         howto manager,  , typedef arelent, Relocations
1618
1619 SUBSECTION
1620         The howto manager
1621
1622         When an application wants to create a relocation, but doesn't
1623         know what the target machine might call it, it can find out by
1624         using this bit of code.
1625
1626 */
1627
1628 /*
1629 TYPEDEF
1630         bfd_reloc_code_type
1631
1632 DESCRIPTION
1633         The insides of a reloc code.  The idea is that, eventually, there
1634         will be one enumerator for every type of relocation we ever do.
1635         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1636         return a howto pointer.
1637
1638         This does mean that the application must determine the correct
1639         enumerator value; you can't get a howto pointer from a random set
1640         of attributes.
1641
1642 SENUM
1643    bfd_reloc_code_real
1644
1645 ENUM
1646   BFD_RELOC_64
1647 ENUMX
1648   BFD_RELOC_32
1649 ENUMX
1650   BFD_RELOC_26
1651 ENUMX
1652   BFD_RELOC_24
1653 ENUMX
1654   BFD_RELOC_16
1655 ENUMX
1656   BFD_RELOC_14
1657 ENUMX
1658   BFD_RELOC_8
1659 ENUMDOC
1660   Basic absolute relocations of N bits.
1661
1662 ENUM
1663   BFD_RELOC_64_PCREL
1664 ENUMX
1665   BFD_RELOC_32_PCREL
1666 ENUMX
1667   BFD_RELOC_24_PCREL
1668 ENUMX
1669   BFD_RELOC_16_PCREL
1670 ENUMX
1671   BFD_RELOC_12_PCREL
1672 ENUMX
1673   BFD_RELOC_8_PCREL
1674 ENUMDOC
1675   PC-relative relocations.  Sometimes these are relative to the address
1676 of the relocation itself; sometimes they are relative to the start of
1677 the section containing the relocation.  It depends on the specific target.
1678
1679 The 24-bit relocation is used in some Intel 960 configurations.
1680
1681 ENUM
1682   BFD_RELOC_32_SECREL
1683 ENUMDOC
1684   Section relative relocations.  Some targets need this for DWARF2.
1685
1686 ENUM
1687   BFD_RELOC_32_GOT_PCREL
1688 ENUMX
1689   BFD_RELOC_16_GOT_PCREL
1690 ENUMX
1691   BFD_RELOC_8_GOT_PCREL
1692 ENUMX
1693   BFD_RELOC_32_GOTOFF
1694 ENUMX
1695   BFD_RELOC_16_GOTOFF
1696 ENUMX
1697   BFD_RELOC_LO16_GOTOFF
1698 ENUMX
1699   BFD_RELOC_HI16_GOTOFF
1700 ENUMX
1701   BFD_RELOC_HI16_S_GOTOFF
1702 ENUMX
1703   BFD_RELOC_8_GOTOFF
1704 ENUMX
1705   BFD_RELOC_64_PLT_PCREL
1706 ENUMX
1707   BFD_RELOC_32_PLT_PCREL
1708 ENUMX
1709   BFD_RELOC_24_PLT_PCREL
1710 ENUMX
1711   BFD_RELOC_16_PLT_PCREL
1712 ENUMX
1713   BFD_RELOC_8_PLT_PCREL
1714 ENUMX
1715   BFD_RELOC_64_PLTOFF
1716 ENUMX
1717   BFD_RELOC_32_PLTOFF
1718 ENUMX
1719   BFD_RELOC_16_PLTOFF
1720 ENUMX
1721   BFD_RELOC_LO16_PLTOFF
1722 ENUMX
1723   BFD_RELOC_HI16_PLTOFF
1724 ENUMX
1725   BFD_RELOC_HI16_S_PLTOFF
1726 ENUMX
1727   BFD_RELOC_8_PLTOFF
1728 ENUMDOC
1729   For ELF.
1730
1731 ENUM
1732   BFD_RELOC_68K_GLOB_DAT
1733 ENUMX
1734   BFD_RELOC_68K_JMP_SLOT
1735 ENUMX
1736   BFD_RELOC_68K_RELATIVE
1737 ENUMX
1738   BFD_RELOC_68K_TLS_GD32
1739 ENUMX
1740   BFD_RELOC_68K_TLS_GD16
1741 ENUMX
1742   BFD_RELOC_68K_TLS_GD8
1743 ENUMX
1744   BFD_RELOC_68K_TLS_LDM32
1745 ENUMX
1746   BFD_RELOC_68K_TLS_LDM16
1747 ENUMX
1748   BFD_RELOC_68K_TLS_LDM8
1749 ENUMX
1750   BFD_RELOC_68K_TLS_LDO32
1751 ENUMX
1752   BFD_RELOC_68K_TLS_LDO16
1753 ENUMX
1754   BFD_RELOC_68K_TLS_LDO8
1755 ENUMX
1756   BFD_RELOC_68K_TLS_IE32
1757 ENUMX
1758   BFD_RELOC_68K_TLS_IE16
1759 ENUMX
1760   BFD_RELOC_68K_TLS_IE8
1761 ENUMX
1762   BFD_RELOC_68K_TLS_LE32
1763 ENUMX
1764   BFD_RELOC_68K_TLS_LE16
1765 ENUMX
1766   BFD_RELOC_68K_TLS_LE8
1767 ENUMDOC
1768   Relocations used by 68K ELF.
1769
1770 ENUM
1771   BFD_RELOC_32_BASEREL
1772 ENUMX
1773   BFD_RELOC_16_BASEREL
1774 ENUMX
1775   BFD_RELOC_LO16_BASEREL
1776 ENUMX
1777   BFD_RELOC_HI16_BASEREL
1778 ENUMX
1779   BFD_RELOC_HI16_S_BASEREL
1780 ENUMX
1781   BFD_RELOC_8_BASEREL
1782 ENUMX
1783   BFD_RELOC_RVA
1784 ENUMDOC
1785   Linkage-table relative.
1786
1787 ENUM
1788   BFD_RELOC_8_FFnn
1789 ENUMDOC
1790   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1791
1792 ENUM
1793   BFD_RELOC_32_PCREL_S2
1794 ENUMX
1795   BFD_RELOC_16_PCREL_S2
1796 ENUMX
1797   BFD_RELOC_23_PCREL_S2
1798 ENUMDOC
1799   These PC-relative relocations are stored as word displacements --
1800 i.e., byte displacements shifted right two bits.  The 30-bit word
1801 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1802 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1803 signed 16-bit displacement is used on the MIPS, and the 23-bit
1804 displacement is used on the Alpha.
1805
1806 ENUM
1807   BFD_RELOC_HI22
1808 ENUMX
1809   BFD_RELOC_LO10
1810 ENUMDOC
1811   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1812 the target word.  These are used on the SPARC.
1813
1814 ENUM
1815   BFD_RELOC_GPREL16
1816 ENUMX
1817   BFD_RELOC_GPREL32
1818 ENUMDOC
1819   For systems that allocate a Global Pointer register, these are
1820 displacements off that register.  These relocation types are
1821 handled specially, because the value the register will have is
1822 decided relatively late.
1823
1824 ENUM
1825   BFD_RELOC_I960_CALLJ
1826 ENUMDOC
1827   Reloc types used for i960/b.out.
1828
1829 ENUM
1830   BFD_RELOC_NONE
1831 ENUMX
1832   BFD_RELOC_SPARC_WDISP22
1833 ENUMX
1834   BFD_RELOC_SPARC22
1835 ENUMX
1836   BFD_RELOC_SPARC13
1837 ENUMX
1838   BFD_RELOC_SPARC_GOT10
1839 ENUMX
1840   BFD_RELOC_SPARC_GOT13
1841 ENUMX
1842   BFD_RELOC_SPARC_GOT22
1843 ENUMX
1844   BFD_RELOC_SPARC_PC10
1845 ENUMX
1846   BFD_RELOC_SPARC_PC22
1847 ENUMX
1848   BFD_RELOC_SPARC_WPLT30
1849 ENUMX
1850   BFD_RELOC_SPARC_COPY
1851 ENUMX
1852   BFD_RELOC_SPARC_GLOB_DAT
1853 ENUMX
1854   BFD_RELOC_SPARC_JMP_SLOT
1855 ENUMX
1856   BFD_RELOC_SPARC_RELATIVE
1857 ENUMX
1858   BFD_RELOC_SPARC_UA16
1859 ENUMX
1860   BFD_RELOC_SPARC_UA32
1861 ENUMX
1862   BFD_RELOC_SPARC_UA64
1863 ENUMX
1864   BFD_RELOC_SPARC_GOTDATA_HIX22
1865 ENUMX
1866   BFD_RELOC_SPARC_GOTDATA_LOX10
1867 ENUMX
1868   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1869 ENUMX
1870   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1871 ENUMX
1872   BFD_RELOC_SPARC_GOTDATA_OP
1873 ENUMDOC
1874   SPARC ELF relocations.  There is probably some overlap with other
1875   relocation types already defined.
1876
1877 ENUM
1878   BFD_RELOC_SPARC_BASE13
1879 ENUMX
1880   BFD_RELOC_SPARC_BASE22
1881 ENUMDOC
1882   I think these are specific to SPARC a.out (e.g., Sun 4).
1883
1884 ENUMEQ
1885   BFD_RELOC_SPARC_64
1886   BFD_RELOC_64
1887 ENUMX
1888   BFD_RELOC_SPARC_10
1889 ENUMX
1890   BFD_RELOC_SPARC_11
1891 ENUMX
1892   BFD_RELOC_SPARC_OLO10
1893 ENUMX
1894   BFD_RELOC_SPARC_HH22
1895 ENUMX
1896   BFD_RELOC_SPARC_HM10
1897 ENUMX
1898   BFD_RELOC_SPARC_LM22
1899 ENUMX
1900   BFD_RELOC_SPARC_PC_HH22
1901 ENUMX
1902   BFD_RELOC_SPARC_PC_HM10
1903 ENUMX
1904   BFD_RELOC_SPARC_PC_LM22
1905 ENUMX
1906   BFD_RELOC_SPARC_WDISP16
1907 ENUMX
1908   BFD_RELOC_SPARC_WDISP19
1909 ENUMX
1910   BFD_RELOC_SPARC_7
1911 ENUMX
1912   BFD_RELOC_SPARC_6
1913 ENUMX
1914   BFD_RELOC_SPARC_5
1915 ENUMEQX
1916   BFD_RELOC_SPARC_DISP64
1917   BFD_RELOC_64_PCREL
1918 ENUMX
1919   BFD_RELOC_SPARC_PLT32
1920 ENUMX
1921   BFD_RELOC_SPARC_PLT64
1922 ENUMX
1923   BFD_RELOC_SPARC_HIX22
1924 ENUMX
1925   BFD_RELOC_SPARC_LOX10
1926 ENUMX
1927   BFD_RELOC_SPARC_H44
1928 ENUMX
1929   BFD_RELOC_SPARC_M44
1930 ENUMX
1931   BFD_RELOC_SPARC_L44
1932 ENUMX
1933   BFD_RELOC_SPARC_REGISTER
1934 ENUMDOC
1935   SPARC64 relocations
1936
1937 ENUM
1938   BFD_RELOC_SPARC_REV32
1939 ENUMDOC
1940   SPARC little endian relocation
1941 ENUM
1942   BFD_RELOC_SPARC_TLS_GD_HI22
1943 ENUMX
1944   BFD_RELOC_SPARC_TLS_GD_LO10
1945 ENUMX
1946   BFD_RELOC_SPARC_TLS_GD_ADD
1947 ENUMX
1948   BFD_RELOC_SPARC_TLS_GD_CALL
1949 ENUMX
1950   BFD_RELOC_SPARC_TLS_LDM_HI22
1951 ENUMX
1952   BFD_RELOC_SPARC_TLS_LDM_LO10
1953 ENUMX
1954   BFD_RELOC_SPARC_TLS_LDM_ADD
1955 ENUMX
1956   BFD_RELOC_SPARC_TLS_LDM_CALL
1957 ENUMX
1958   BFD_RELOC_SPARC_TLS_LDO_HIX22
1959 ENUMX
1960   BFD_RELOC_SPARC_TLS_LDO_LOX10
1961 ENUMX
1962   BFD_RELOC_SPARC_TLS_LDO_ADD
1963 ENUMX
1964   BFD_RELOC_SPARC_TLS_IE_HI22
1965 ENUMX
1966   BFD_RELOC_SPARC_TLS_IE_LO10
1967 ENUMX
1968   BFD_RELOC_SPARC_TLS_IE_LD
1969 ENUMX
1970   BFD_RELOC_SPARC_TLS_IE_LDX
1971 ENUMX
1972   BFD_RELOC_SPARC_TLS_IE_ADD
1973 ENUMX
1974   BFD_RELOC_SPARC_TLS_LE_HIX22
1975 ENUMX
1976   BFD_RELOC_SPARC_TLS_LE_LOX10
1977 ENUMX
1978   BFD_RELOC_SPARC_TLS_DTPMOD32
1979 ENUMX
1980   BFD_RELOC_SPARC_TLS_DTPMOD64
1981 ENUMX
1982   BFD_RELOC_SPARC_TLS_DTPOFF32
1983 ENUMX
1984   BFD_RELOC_SPARC_TLS_DTPOFF64
1985 ENUMX
1986   BFD_RELOC_SPARC_TLS_TPOFF32
1987 ENUMX
1988   BFD_RELOC_SPARC_TLS_TPOFF64
1989 ENUMDOC
1990   SPARC TLS relocations
1991
1992 ENUM
1993   BFD_RELOC_SPU_IMM7
1994 ENUMX
1995   BFD_RELOC_SPU_IMM8
1996 ENUMX
1997   BFD_RELOC_SPU_IMM10
1998 ENUMX
1999   BFD_RELOC_SPU_IMM10W
2000 ENUMX
2001   BFD_RELOC_SPU_IMM16
2002 ENUMX
2003   BFD_RELOC_SPU_IMM16W
2004 ENUMX
2005   BFD_RELOC_SPU_IMM18
2006 ENUMX
2007   BFD_RELOC_SPU_PCREL9a
2008 ENUMX
2009   BFD_RELOC_SPU_PCREL9b
2010 ENUMX
2011   BFD_RELOC_SPU_PCREL16
2012 ENUMX
2013   BFD_RELOC_SPU_LO16
2014 ENUMX
2015   BFD_RELOC_SPU_HI16
2016 ENUMX
2017   BFD_RELOC_SPU_PPU32
2018 ENUMX
2019   BFD_RELOC_SPU_PPU64
2020 ENUMX
2021   BFD_RELOC_SPU_ADD_PIC
2022 ENUMDOC
2023   SPU Relocations.
2024
2025 ENUM
2026   BFD_RELOC_ALPHA_GPDISP_HI16
2027 ENUMDOC
2028   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2029      "addend" in some special way.
2030   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2031      writing; when reading, it will be the absolute section symbol.  The
2032      addend is the displacement in bytes of the "lda" instruction from
2033      the "ldah" instruction (which is at the address of this reloc).
2034 ENUM
2035   BFD_RELOC_ALPHA_GPDISP_LO16
2036 ENUMDOC
2037   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2038      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2039      relocations out, and is filled in with the file's GP value on
2040      reading, for convenience.
2041
2042 ENUM
2043   BFD_RELOC_ALPHA_GPDISP
2044 ENUMDOC
2045   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2046      relocation except that there is no accompanying GPDISP_LO16
2047      relocation.
2048
2049 ENUM
2050   BFD_RELOC_ALPHA_LITERAL
2051 ENUMX
2052   BFD_RELOC_ALPHA_ELF_LITERAL
2053 ENUMX
2054   BFD_RELOC_ALPHA_LITUSE
2055 ENUMDOC
2056   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2057      the assembler turns it into a LDQ instruction to load the address of
2058      the symbol, and then fills in a register in the real instruction.
2059
2060      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2061      section symbol.  The addend is ignored when writing, but is filled
2062      in with the file's GP value on reading, for convenience, as with the
2063      GPDISP_LO16 reloc.
2064
2065      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2066      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2067      but it generates output not based on the position within the .got
2068      section, but relative to the GP value chosen for the file during the
2069      final link stage.
2070
2071      The LITUSE reloc, on the instruction using the loaded address, gives
2072      information to the linker that it might be able to use to optimize
2073      away some literal section references.  The symbol is ignored (read
2074      as the absolute section symbol), and the "addend" indicates the type
2075      of instruction using the register:
2076               1 - "memory" fmt insn
2077               2 - byte-manipulation (byte offset reg)
2078               3 - jsr (target of branch)
2079
2080 ENUM
2081   BFD_RELOC_ALPHA_HINT
2082 ENUMDOC
2083   The HINT relocation indicates a value that should be filled into the
2084      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2085      prediction logic which may be provided on some processors.
2086
2087 ENUM
2088   BFD_RELOC_ALPHA_LINKAGE
2089 ENUMDOC
2090   The LINKAGE relocation outputs a linkage pair in the object file,
2091      which is filled by the linker.
2092
2093 ENUM
2094   BFD_RELOC_ALPHA_CODEADDR
2095 ENUMDOC
2096   The CODEADDR relocation outputs a STO_CA in the object file,
2097      which is filled by the linker.
2098
2099 ENUM
2100   BFD_RELOC_ALPHA_GPREL_HI16
2101 ENUMX
2102   BFD_RELOC_ALPHA_GPREL_LO16
2103 ENUMDOC
2104   The GPREL_HI/LO relocations together form a 32-bit offset from the
2105      GP register.
2106
2107 ENUM
2108   BFD_RELOC_ALPHA_BRSGP
2109 ENUMDOC
2110   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2111   share a common GP, and the target address is adjusted for
2112   STO_ALPHA_STD_GPLOAD.
2113
2114 ENUM
2115   BFD_RELOC_ALPHA_NOP
2116 ENUMDOC
2117   The NOP relocation outputs a NOP if the longword displacement
2118      between two procedure entry points is < 2^21.
2119
2120 ENUM
2121   BFD_RELOC_ALPHA_BSR
2122 ENUMDOC
2123   The BSR relocation outputs a BSR if the longword displacement
2124      between two procedure entry points is < 2^21.
2125
2126 ENUM
2127   BFD_RELOC_ALPHA_LDA
2128 ENUMDOC
2129   The LDA relocation outputs a LDA if the longword displacement
2130      between two procedure entry points is < 2^16.
2131
2132 ENUM
2133   BFD_RELOC_ALPHA_BOH
2134 ENUMDOC
2135   The BOH relocation outputs a BSR if the longword displacement
2136      between two procedure entry points is < 2^21, or else a hint.
2137
2138 ENUM
2139   BFD_RELOC_ALPHA_TLSGD
2140 ENUMX
2141   BFD_RELOC_ALPHA_TLSLDM
2142 ENUMX
2143   BFD_RELOC_ALPHA_DTPMOD64
2144 ENUMX
2145   BFD_RELOC_ALPHA_GOTDTPREL16
2146 ENUMX
2147   BFD_RELOC_ALPHA_DTPREL64
2148 ENUMX
2149   BFD_RELOC_ALPHA_DTPREL_HI16
2150 ENUMX
2151   BFD_RELOC_ALPHA_DTPREL_LO16
2152 ENUMX
2153   BFD_RELOC_ALPHA_DTPREL16
2154 ENUMX
2155   BFD_RELOC_ALPHA_GOTTPREL16
2156 ENUMX
2157   BFD_RELOC_ALPHA_TPREL64
2158 ENUMX
2159   BFD_RELOC_ALPHA_TPREL_HI16
2160 ENUMX
2161   BFD_RELOC_ALPHA_TPREL_LO16
2162 ENUMX
2163   BFD_RELOC_ALPHA_TPREL16
2164 ENUMDOC
2165   Alpha thread-local storage relocations.
2166
2167 ENUM
2168   BFD_RELOC_MIPS_JMP
2169 ENUMDOC
2170   Bits 27..2 of the relocation address shifted right 2 bits;
2171      simple reloc otherwise.
2172
2173 ENUM
2174   BFD_RELOC_MIPS16_JMP
2175 ENUMDOC
2176   The MIPS16 jump instruction.
2177
2178 ENUM
2179   BFD_RELOC_MIPS16_GPREL
2180 ENUMDOC
2181   MIPS16 GP relative reloc.
2182
2183 ENUM
2184   BFD_RELOC_HI16
2185 ENUMDOC
2186   High 16 bits of 32-bit value; simple reloc.
2187 ENUM
2188   BFD_RELOC_HI16_S
2189 ENUMDOC
2190   High 16 bits of 32-bit value but the low 16 bits will be sign
2191      extended and added to form the final result.  If the low 16
2192      bits form a negative number, we need to add one to the high value
2193      to compensate for the borrow when the low bits are added.
2194 ENUM
2195   BFD_RELOC_LO16
2196 ENUMDOC
2197   Low 16 bits.
2198
2199 ENUM
2200   BFD_RELOC_HI16_PCREL
2201 ENUMDOC
2202   High 16 bits of 32-bit pc-relative value
2203 ENUM
2204   BFD_RELOC_HI16_S_PCREL
2205 ENUMDOC
2206   High 16 bits of 32-bit pc-relative value, adjusted
2207 ENUM
2208   BFD_RELOC_LO16_PCREL
2209 ENUMDOC
2210   Low 16 bits of pc-relative value
2211
2212 ENUM
2213   BFD_RELOC_MIPS16_GOT16
2214 ENUMX
2215   BFD_RELOC_MIPS16_CALL16
2216 ENUMDOC
2217   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2218      16-bit immediate fields
2219 ENUM
2220   BFD_RELOC_MIPS16_HI16
2221 ENUMDOC
2222   MIPS16 high 16 bits of 32-bit value.
2223 ENUM
2224   BFD_RELOC_MIPS16_HI16_S
2225 ENUMDOC
2226   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2227      extended and added to form the final result.  If the low 16
2228      bits form a negative number, we need to add one to the high value
2229      to compensate for the borrow when the low bits are added.
2230 ENUM
2231   BFD_RELOC_MIPS16_LO16
2232 ENUMDOC
2233   MIPS16 low 16 bits.
2234
2235 ENUM
2236   BFD_RELOC_MIPS_LITERAL
2237 ENUMDOC
2238   Relocation against a MIPS literal section.
2239
2240 ENUM
2241   BFD_RELOC_MIPS_GOT16
2242 ENUMX
2243   BFD_RELOC_MIPS_CALL16
2244 ENUMX
2245   BFD_RELOC_MIPS_GOT_HI16
2246 ENUMX
2247   BFD_RELOC_MIPS_GOT_LO16
2248 ENUMX
2249   BFD_RELOC_MIPS_CALL_HI16
2250 ENUMX
2251   BFD_RELOC_MIPS_CALL_LO16
2252 ENUMX
2253   BFD_RELOC_MIPS_SUB
2254 ENUMX
2255   BFD_RELOC_MIPS_GOT_PAGE
2256 ENUMX
2257   BFD_RELOC_MIPS_GOT_OFST
2258 ENUMX
2259   BFD_RELOC_MIPS_GOT_DISP
2260 ENUMX
2261   BFD_RELOC_MIPS_SHIFT5
2262 ENUMX
2263   BFD_RELOC_MIPS_SHIFT6
2264 ENUMX
2265   BFD_RELOC_MIPS_INSERT_A
2266 ENUMX
2267   BFD_RELOC_MIPS_INSERT_B
2268 ENUMX
2269   BFD_RELOC_MIPS_DELETE
2270 ENUMX
2271   BFD_RELOC_MIPS_HIGHEST
2272 ENUMX
2273   BFD_RELOC_MIPS_HIGHER
2274 ENUMX
2275   BFD_RELOC_MIPS_SCN_DISP
2276 ENUMX
2277   BFD_RELOC_MIPS_REL16
2278 ENUMX
2279   BFD_RELOC_MIPS_RELGOT
2280 ENUMX
2281   BFD_RELOC_MIPS_JALR
2282 ENUMX
2283   BFD_RELOC_MIPS_TLS_DTPMOD32
2284 ENUMX
2285   BFD_RELOC_MIPS_TLS_DTPREL32
2286 ENUMX
2287   BFD_RELOC_MIPS_TLS_DTPMOD64
2288 ENUMX
2289   BFD_RELOC_MIPS_TLS_DTPREL64
2290 ENUMX
2291   BFD_RELOC_MIPS_TLS_GD
2292 ENUMX
2293   BFD_RELOC_MIPS_TLS_LDM
2294 ENUMX
2295   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2296 ENUMX
2297   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2298 ENUMX
2299   BFD_RELOC_MIPS_TLS_GOTTPREL
2300 ENUMX
2301   BFD_RELOC_MIPS_TLS_TPREL32
2302 ENUMX
2303   BFD_RELOC_MIPS_TLS_TPREL64
2304 ENUMX
2305   BFD_RELOC_MIPS_TLS_TPREL_HI16
2306 ENUMX
2307   BFD_RELOC_MIPS_TLS_TPREL_LO16
2308 ENUMDOC
2309   MIPS ELF relocations.
2310 COMMENT
2311
2312 ENUM
2313   BFD_RELOC_MIPS_COPY
2314 ENUMX
2315   BFD_RELOC_MIPS_JUMP_SLOT
2316 ENUMDOC
2317   MIPS ELF relocations (VxWorks and PLT extensions).
2318 COMMENT
2319
2320 ENUM
2321   BFD_RELOC_MOXIE_10_PCREL
2322 ENUMDOC
2323   Moxie ELF relocations.
2324 COMMENT
2325
2326 ENUM
2327   BFD_RELOC_FRV_LABEL16
2328 ENUMX
2329   BFD_RELOC_FRV_LABEL24
2330 ENUMX
2331   BFD_RELOC_FRV_LO16
2332 ENUMX
2333   BFD_RELOC_FRV_HI16
2334 ENUMX
2335   BFD_RELOC_FRV_GPREL12
2336 ENUMX
2337   BFD_RELOC_FRV_GPRELU12
2338 ENUMX
2339   BFD_RELOC_FRV_GPREL32
2340 ENUMX
2341   BFD_RELOC_FRV_GPRELHI
2342 ENUMX
2343   BFD_RELOC_FRV_GPRELLO
2344 ENUMX
2345   BFD_RELOC_FRV_GOT12
2346 ENUMX
2347   BFD_RELOC_FRV_GOTHI
2348 ENUMX
2349   BFD_RELOC_FRV_GOTLO
2350 ENUMX
2351   BFD_RELOC_FRV_FUNCDESC
2352 ENUMX
2353   BFD_RELOC_FRV_FUNCDESC_GOT12
2354 ENUMX
2355   BFD_RELOC_FRV_FUNCDESC_GOTHI
2356 ENUMX
2357   BFD_RELOC_FRV_FUNCDESC_GOTLO
2358 ENUMX
2359   BFD_RELOC_FRV_FUNCDESC_VALUE
2360 ENUMX
2361   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2362 ENUMX
2363   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2364 ENUMX
2365   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2366 ENUMX
2367   BFD_RELOC_FRV_GOTOFF12
2368 ENUMX
2369   BFD_RELOC_FRV_GOTOFFHI
2370 ENUMX
2371   BFD_RELOC_FRV_GOTOFFLO
2372 ENUMX
2373   BFD_RELOC_FRV_GETTLSOFF
2374 ENUMX
2375   BFD_RELOC_FRV_TLSDESC_VALUE
2376 ENUMX
2377   BFD_RELOC_FRV_GOTTLSDESC12
2378 ENUMX
2379   BFD_RELOC_FRV_GOTTLSDESCHI
2380 ENUMX
2381   BFD_RELOC_FRV_GOTTLSDESCLO
2382 ENUMX
2383   BFD_RELOC_FRV_TLSMOFF12
2384 ENUMX
2385   BFD_RELOC_FRV_TLSMOFFHI
2386 ENUMX
2387   BFD_RELOC_FRV_TLSMOFFLO
2388 ENUMX
2389   BFD_RELOC_FRV_GOTTLSOFF12
2390 ENUMX
2391   BFD_RELOC_FRV_GOTTLSOFFHI
2392 ENUMX
2393   BFD_RELOC_FRV_GOTTLSOFFLO
2394 ENUMX
2395   BFD_RELOC_FRV_TLSOFF
2396 ENUMX
2397   BFD_RELOC_FRV_TLSDESC_RELAX
2398 ENUMX
2399   BFD_RELOC_FRV_GETTLSOFF_RELAX
2400 ENUMX
2401   BFD_RELOC_FRV_TLSOFF_RELAX
2402 ENUMX
2403   BFD_RELOC_FRV_TLSMOFF
2404 ENUMDOC
2405   Fujitsu Frv Relocations.
2406 COMMENT
2407
2408 ENUM
2409   BFD_RELOC_MN10300_GOTOFF24
2410 ENUMDOC
2411   This is a 24bit GOT-relative reloc for the mn10300.
2412 ENUM
2413   BFD_RELOC_MN10300_GOT32
2414 ENUMDOC
2415   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2416   in the instruction.
2417 ENUM
2418   BFD_RELOC_MN10300_GOT24
2419 ENUMDOC
2420   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2421   in the instruction.
2422 ENUM
2423   BFD_RELOC_MN10300_GOT16
2424 ENUMDOC
2425   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2426   in the instruction.
2427 ENUM
2428   BFD_RELOC_MN10300_COPY
2429 ENUMDOC
2430   Copy symbol at runtime.
2431 ENUM
2432   BFD_RELOC_MN10300_GLOB_DAT
2433 ENUMDOC
2434   Create GOT entry.
2435 ENUM
2436   BFD_RELOC_MN10300_JMP_SLOT
2437 ENUMDOC
2438   Create PLT entry.
2439 ENUM
2440   BFD_RELOC_MN10300_RELATIVE
2441 ENUMDOC
2442   Adjust by program base.
2443 ENUM
2444   BFD_RELOC_MN10300_SYM_DIFF
2445 ENUMDOC
2446   Together with another reloc targeted at the same location,
2447   allows for a value that is the difference of two symbols
2448   in the same section.
2449 ENUM
2450   BFD_RELOC_MN10300_ALIGN
2451 ENUMDOC
2452   The addend of this reloc is an alignment power that must
2453   be honoured at the offset's location, regardless of linker
2454   relaxation.
2455 COMMENT
2456
2457 ENUM
2458   BFD_RELOC_386_GOT32
2459 ENUMX
2460   BFD_RELOC_386_PLT32
2461 ENUMX
2462   BFD_RELOC_386_COPY
2463 ENUMX
2464   BFD_RELOC_386_GLOB_DAT
2465 ENUMX
2466   BFD_RELOC_386_JUMP_SLOT
2467 ENUMX
2468   BFD_RELOC_386_RELATIVE
2469 ENUMX
2470   BFD_RELOC_386_GOTOFF
2471 ENUMX
2472   BFD_RELOC_386_GOTPC
2473 ENUMX
2474   BFD_RELOC_386_TLS_TPOFF
2475 ENUMX
2476   BFD_RELOC_386_TLS_IE
2477 ENUMX
2478   BFD_RELOC_386_TLS_GOTIE
2479 ENUMX
2480   BFD_RELOC_386_TLS_LE
2481 ENUMX
2482   BFD_RELOC_386_TLS_GD
2483 ENUMX
2484   BFD_RELOC_386_TLS_LDM
2485 ENUMX
2486   BFD_RELOC_386_TLS_LDO_32
2487 ENUMX
2488   BFD_RELOC_386_TLS_IE_32
2489 ENUMX
2490   BFD_RELOC_386_TLS_LE_32
2491 ENUMX
2492   BFD_RELOC_386_TLS_DTPMOD32
2493 ENUMX
2494   BFD_RELOC_386_TLS_DTPOFF32
2495 ENUMX
2496   BFD_RELOC_386_TLS_TPOFF32
2497 ENUMX
2498   BFD_RELOC_386_TLS_GOTDESC
2499 ENUMX
2500   BFD_RELOC_386_TLS_DESC_CALL
2501 ENUMX
2502   BFD_RELOC_386_TLS_DESC
2503 ENUMX
2504   BFD_RELOC_386_IRELATIVE
2505 ENUMDOC
2506   i386/elf relocations
2507
2508 ENUM
2509   BFD_RELOC_X86_64_GOT32
2510 ENUMX
2511   BFD_RELOC_X86_64_PLT32
2512 ENUMX
2513   BFD_RELOC_X86_64_COPY
2514 ENUMX
2515   BFD_RELOC_X86_64_GLOB_DAT
2516 ENUMX
2517   BFD_RELOC_X86_64_JUMP_SLOT
2518 ENUMX
2519   BFD_RELOC_X86_64_RELATIVE
2520 ENUMX
2521   BFD_RELOC_X86_64_GOTPCREL
2522 ENUMX
2523   BFD_RELOC_X86_64_32S
2524 ENUMX
2525   BFD_RELOC_X86_64_DTPMOD64
2526 ENUMX
2527   BFD_RELOC_X86_64_DTPOFF64
2528 ENUMX
2529   BFD_RELOC_X86_64_TPOFF64
2530 ENUMX
2531   BFD_RELOC_X86_64_TLSGD
2532 ENUMX
2533   BFD_RELOC_X86_64_TLSLD
2534 ENUMX
2535   BFD_RELOC_X86_64_DTPOFF32
2536 ENUMX
2537   BFD_RELOC_X86_64_GOTTPOFF
2538 ENUMX
2539   BFD_RELOC_X86_64_TPOFF32
2540 ENUMX
2541   BFD_RELOC_X86_64_GOTOFF64
2542 ENUMX
2543   BFD_RELOC_X86_64_GOTPC32
2544 ENUMX
2545   BFD_RELOC_X86_64_GOT64
2546 ENUMX
2547   BFD_RELOC_X86_64_GOTPCREL64
2548 ENUMX
2549   BFD_RELOC_X86_64_GOTPC64
2550 ENUMX
2551   BFD_RELOC_X86_64_GOTPLT64
2552 ENUMX
2553   BFD_RELOC_X86_64_PLTOFF64
2554 ENUMX
2555   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2556 ENUMX
2557   BFD_RELOC_X86_64_TLSDESC_CALL
2558 ENUMX
2559   BFD_RELOC_X86_64_TLSDESC
2560 ENUMX
2561   BFD_RELOC_X86_64_IRELATIVE
2562 ENUMDOC
2563   x86-64/elf relocations
2564
2565 ENUM
2566   BFD_RELOC_NS32K_IMM_8
2567 ENUMX
2568   BFD_RELOC_NS32K_IMM_16
2569 ENUMX
2570   BFD_RELOC_NS32K_IMM_32
2571 ENUMX
2572   BFD_RELOC_NS32K_IMM_8_PCREL
2573 ENUMX
2574   BFD_RELOC_NS32K_IMM_16_PCREL
2575 ENUMX
2576   BFD_RELOC_NS32K_IMM_32_PCREL
2577 ENUMX
2578   BFD_RELOC_NS32K_DISP_8
2579 ENUMX
2580   BFD_RELOC_NS32K_DISP_16
2581 ENUMX
2582   BFD_RELOC_NS32K_DISP_32
2583 ENUMX
2584   BFD_RELOC_NS32K_DISP_8_PCREL
2585 ENUMX
2586   BFD_RELOC_NS32K_DISP_16_PCREL
2587 ENUMX
2588   BFD_RELOC_NS32K_DISP_32_PCREL
2589 ENUMDOC
2590   ns32k relocations
2591
2592 ENUM
2593   BFD_RELOC_PDP11_DISP_8_PCREL
2594 ENUMX
2595   BFD_RELOC_PDP11_DISP_6_PCREL
2596 ENUMDOC
2597   PDP11 relocations
2598
2599 ENUM
2600   BFD_RELOC_PJ_CODE_HI16
2601 ENUMX
2602   BFD_RELOC_PJ_CODE_LO16
2603 ENUMX
2604   BFD_RELOC_PJ_CODE_DIR16
2605 ENUMX
2606   BFD_RELOC_PJ_CODE_DIR32
2607 ENUMX
2608   BFD_RELOC_PJ_CODE_REL16
2609 ENUMX
2610   BFD_RELOC_PJ_CODE_REL32
2611 ENUMDOC
2612   Picojava relocs.  Not all of these appear in object files.
2613
2614 ENUM
2615   BFD_RELOC_PPC_B26
2616 ENUMX
2617   BFD_RELOC_PPC_BA26
2618 ENUMX
2619   BFD_RELOC_PPC_TOC16
2620 ENUMX
2621   BFD_RELOC_PPC_B16
2622 ENUMX
2623   BFD_RELOC_PPC_B16_BRTAKEN
2624 ENUMX
2625   BFD_RELOC_PPC_B16_BRNTAKEN
2626 ENUMX
2627   BFD_RELOC_PPC_BA16
2628 ENUMX
2629   BFD_RELOC_PPC_BA16_BRTAKEN
2630 ENUMX
2631   BFD_RELOC_PPC_BA16_BRNTAKEN
2632 ENUMX
2633   BFD_RELOC_PPC_COPY
2634 ENUMX
2635   BFD_RELOC_PPC_GLOB_DAT
2636 ENUMX
2637   BFD_RELOC_PPC_JMP_SLOT
2638 ENUMX
2639   BFD_RELOC_PPC_RELATIVE
2640 ENUMX
2641   BFD_RELOC_PPC_LOCAL24PC
2642 ENUMX
2643   BFD_RELOC_PPC_EMB_NADDR32
2644 ENUMX
2645   BFD_RELOC_PPC_EMB_NADDR16
2646 ENUMX
2647   BFD_RELOC_PPC_EMB_NADDR16_LO
2648 ENUMX
2649   BFD_RELOC_PPC_EMB_NADDR16_HI
2650 ENUMX
2651   BFD_RELOC_PPC_EMB_NADDR16_HA
2652 ENUMX
2653   BFD_RELOC_PPC_EMB_SDAI16
2654 ENUMX
2655   BFD_RELOC_PPC_EMB_SDA2I16
2656 ENUMX
2657   BFD_RELOC_PPC_EMB_SDA2REL
2658 ENUMX
2659   BFD_RELOC_PPC_EMB_SDA21
2660 ENUMX
2661   BFD_RELOC_PPC_EMB_MRKREF
2662 ENUMX
2663   BFD_RELOC_PPC_EMB_RELSEC16
2664 ENUMX
2665   BFD_RELOC_PPC_EMB_RELST_LO
2666 ENUMX
2667   BFD_RELOC_PPC_EMB_RELST_HI
2668 ENUMX
2669   BFD_RELOC_PPC_EMB_RELST_HA
2670 ENUMX
2671   BFD_RELOC_PPC_EMB_BIT_FLD
2672 ENUMX
2673   BFD_RELOC_PPC_EMB_RELSDA
2674 ENUMX
2675   BFD_RELOC_PPC64_HIGHER
2676 ENUMX
2677   BFD_RELOC_PPC64_HIGHER_S
2678 ENUMX
2679   BFD_RELOC_PPC64_HIGHEST
2680 ENUMX
2681   BFD_RELOC_PPC64_HIGHEST_S
2682 ENUMX
2683   BFD_RELOC_PPC64_TOC16_LO
2684 ENUMX
2685   BFD_RELOC_PPC64_TOC16_HI
2686 ENUMX
2687   BFD_RELOC_PPC64_TOC16_HA
2688 ENUMX
2689   BFD_RELOC_PPC64_TOC
2690 ENUMX
2691   BFD_RELOC_PPC64_PLTGOT16
2692 ENUMX
2693   BFD_RELOC_PPC64_PLTGOT16_LO
2694 ENUMX
2695   BFD_RELOC_PPC64_PLTGOT16_HI
2696 ENUMX
2697   BFD_RELOC_PPC64_PLTGOT16_HA
2698 ENUMX
2699   BFD_RELOC_PPC64_ADDR16_DS
2700 ENUMX
2701   BFD_RELOC_PPC64_ADDR16_LO_DS
2702 ENUMX
2703   BFD_RELOC_PPC64_GOT16_DS
2704 ENUMX
2705   BFD_RELOC_PPC64_GOT16_LO_DS
2706 ENUMX
2707   BFD_RELOC_PPC64_PLT16_LO_DS
2708 ENUMX
2709   BFD_RELOC_PPC64_SECTOFF_DS
2710 ENUMX
2711   BFD_RELOC_PPC64_SECTOFF_LO_DS
2712 ENUMX
2713   BFD_RELOC_PPC64_TOC16_DS
2714 ENUMX
2715   BFD_RELOC_PPC64_TOC16_LO_DS
2716 ENUMX
2717   BFD_RELOC_PPC64_PLTGOT16_DS
2718 ENUMX
2719   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2720 ENUMDOC
2721   Power(rs6000) and PowerPC relocations.
2722
2723 ENUM
2724   BFD_RELOC_PPC_TLS
2725 ENUMX
2726   BFD_RELOC_PPC_TLSGD
2727 ENUMX
2728   BFD_RELOC_PPC_TLSLD
2729 ENUMX
2730   BFD_RELOC_PPC_DTPMOD
2731 ENUMX
2732   BFD_RELOC_PPC_TPREL16
2733 ENUMX
2734   BFD_RELOC_PPC_TPREL16_LO
2735 ENUMX
2736   BFD_RELOC_PPC_TPREL16_HI
2737 ENUMX
2738   BFD_RELOC_PPC_TPREL16_HA
2739 ENUMX
2740   BFD_RELOC_PPC_TPREL
2741 ENUMX
2742   BFD_RELOC_PPC_DTPREL16
2743 ENUMX
2744   BFD_RELOC_PPC_DTPREL16_LO
2745 ENUMX
2746   BFD_RELOC_PPC_DTPREL16_HI
2747 ENUMX
2748   BFD_RELOC_PPC_DTPREL16_HA
2749 ENUMX
2750   BFD_RELOC_PPC_DTPREL
2751 ENUMX
2752   BFD_RELOC_PPC_GOT_TLSGD16
2753 ENUMX
2754   BFD_RELOC_PPC_GOT_TLSGD16_LO
2755 ENUMX
2756   BFD_RELOC_PPC_GOT_TLSGD16_HI
2757 ENUMX
2758   BFD_RELOC_PPC_GOT_TLSGD16_HA
2759 ENUMX
2760   BFD_RELOC_PPC_GOT_TLSLD16
2761 ENUMX
2762   BFD_RELOC_PPC_GOT_TLSLD16_LO
2763 ENUMX
2764   BFD_RELOC_PPC_GOT_TLSLD16_HI
2765 ENUMX
2766   BFD_RELOC_PPC_GOT_TLSLD16_HA
2767 ENUMX
2768   BFD_RELOC_PPC_GOT_TPREL16
2769 ENUMX
2770   BFD_RELOC_PPC_GOT_TPREL16_LO
2771 ENUMX
2772   BFD_RELOC_PPC_GOT_TPREL16_HI
2773 ENUMX
2774   BFD_RELOC_PPC_GOT_TPREL16_HA
2775 ENUMX
2776   BFD_RELOC_PPC_GOT_DTPREL16
2777 ENUMX
2778   BFD_RELOC_PPC_GOT_DTPREL16_LO
2779 ENUMX
2780   BFD_RELOC_PPC_GOT_DTPREL16_HI
2781 ENUMX
2782   BFD_RELOC_PPC_GOT_DTPREL16_HA
2783 ENUMX
2784   BFD_RELOC_PPC64_TPREL16_DS
2785 ENUMX
2786   BFD_RELOC_PPC64_TPREL16_LO_DS
2787 ENUMX
2788   BFD_RELOC_PPC64_TPREL16_HIGHER
2789 ENUMX
2790   BFD_RELOC_PPC64_TPREL16_HIGHERA
2791 ENUMX
2792   BFD_RELOC_PPC64_TPREL16_HIGHEST
2793 ENUMX
2794   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2795 ENUMX
2796   BFD_RELOC_PPC64_DTPREL16_DS
2797 ENUMX
2798   BFD_RELOC_PPC64_DTPREL16_LO_DS
2799 ENUMX
2800   BFD_RELOC_PPC64_DTPREL16_HIGHER
2801 ENUMX
2802   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2803 ENUMX
2804   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2805 ENUMX
2806   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2807 ENUMDOC
2808   PowerPC and PowerPC64 thread-local storage relocations.
2809
2810 ENUM
2811   BFD_RELOC_I370_D12
2812 ENUMDOC
2813   IBM 370/390 relocations
2814
2815 ENUM
2816   BFD_RELOC_CTOR
2817 ENUMDOC
2818   The type of reloc used to build a constructor table - at the moment
2819   probably a 32 bit wide absolute relocation, but the target can choose.
2820   It generally does map to one of the other relocation types.
2821
2822 ENUM
2823   BFD_RELOC_ARM_PCREL_BRANCH
2824 ENUMDOC
2825   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2826   not stored in the instruction.
2827 ENUM
2828   BFD_RELOC_ARM_PCREL_BLX
2829 ENUMDOC
2830   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2831   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2832   field in the instruction.
2833 ENUM
2834   BFD_RELOC_THUMB_PCREL_BLX
2835 ENUMDOC
2836   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2837   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2838   field in the instruction.
2839 ENUM
2840   BFD_RELOC_ARM_PCREL_CALL
2841 ENUMDOC
2842   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2843 ENUM
2844   BFD_RELOC_ARM_PCREL_JUMP
2845 ENUMDOC
2846   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2847
2848 ENUM
2849   BFD_RELOC_THUMB_PCREL_BRANCH7
2850 ENUMX
2851   BFD_RELOC_THUMB_PCREL_BRANCH9
2852 ENUMX
2853   BFD_RELOC_THUMB_PCREL_BRANCH12
2854 ENUMX
2855   BFD_RELOC_THUMB_PCREL_BRANCH20
2856 ENUMX
2857   BFD_RELOC_THUMB_PCREL_BRANCH23
2858 ENUMX
2859   BFD_RELOC_THUMB_PCREL_BRANCH25
2860 ENUMDOC
2861   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2862   The lowest bit must be zero and is not stored in the instruction.
2863   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2864   "nn" one smaller in all cases.  Note further that BRANCH23
2865   corresponds to R_ARM_THM_CALL.
2866
2867 ENUM
2868   BFD_RELOC_ARM_OFFSET_IMM
2869 ENUMDOC
2870   12-bit immediate offset, used in ARM-format ldr and str instructions.
2871
2872 ENUM
2873   BFD_RELOC_ARM_THUMB_OFFSET
2874 ENUMDOC
2875   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2876
2877 ENUM
2878   BFD_RELOC_ARM_TARGET1
2879 ENUMDOC
2880   Pc-relative or absolute relocation depending on target.  Used for
2881   entries in .init_array sections.
2882 ENUM
2883   BFD_RELOC_ARM_ROSEGREL32
2884 ENUMDOC
2885   Read-only segment base relative address.
2886 ENUM
2887   BFD_RELOC_ARM_SBREL32
2888 ENUMDOC
2889   Data segment base relative address.
2890 ENUM
2891   BFD_RELOC_ARM_TARGET2
2892 ENUMDOC
2893   This reloc is used for references to RTTI data from exception handling
2894   tables.  The actual definition depends on the target.  It may be a
2895   pc-relative or some form of GOT-indirect relocation.
2896 ENUM
2897   BFD_RELOC_ARM_PREL31
2898 ENUMDOC
2899   31-bit PC relative address.
2900 ENUM
2901   BFD_RELOC_ARM_MOVW
2902 ENUMX
2903   BFD_RELOC_ARM_MOVT
2904 ENUMX
2905   BFD_RELOC_ARM_MOVW_PCREL
2906 ENUMX
2907   BFD_RELOC_ARM_MOVT_PCREL
2908 ENUMX
2909   BFD_RELOC_ARM_THUMB_MOVW
2910 ENUMX
2911   BFD_RELOC_ARM_THUMB_MOVT
2912 ENUMX
2913   BFD_RELOC_ARM_THUMB_MOVW_PCREL
2914 ENUMX
2915   BFD_RELOC_ARM_THUMB_MOVT_PCREL
2916 ENUMDOC
2917   Low and High halfword relocations for MOVW and MOVT instructions.
2918
2919 ENUM
2920   BFD_RELOC_ARM_JUMP_SLOT
2921 ENUMX
2922   BFD_RELOC_ARM_GLOB_DAT
2923 ENUMX
2924   BFD_RELOC_ARM_GOT32
2925 ENUMX
2926   BFD_RELOC_ARM_PLT32
2927 ENUMX
2928   BFD_RELOC_ARM_RELATIVE
2929 ENUMX
2930   BFD_RELOC_ARM_GOTOFF
2931 ENUMX
2932   BFD_RELOC_ARM_GOTPC
2933 ENUMDOC
2934   Relocations for setting up GOTs and PLTs for shared libraries.
2935
2936 ENUM
2937   BFD_RELOC_ARM_TLS_GD32
2938 ENUMX
2939   BFD_RELOC_ARM_TLS_LDO32
2940 ENUMX
2941   BFD_RELOC_ARM_TLS_LDM32
2942 ENUMX
2943   BFD_RELOC_ARM_TLS_DTPOFF32
2944 ENUMX
2945   BFD_RELOC_ARM_TLS_DTPMOD32
2946 ENUMX
2947   BFD_RELOC_ARM_TLS_TPOFF32
2948 ENUMX
2949   BFD_RELOC_ARM_TLS_IE32
2950 ENUMX
2951   BFD_RELOC_ARM_TLS_LE32
2952 ENUMDOC
2953   ARM thread-local storage relocations.
2954
2955 ENUM
2956   BFD_RELOC_ARM_ALU_PC_G0_NC
2957 ENUMX
2958   BFD_RELOC_ARM_ALU_PC_G0
2959 ENUMX
2960   BFD_RELOC_ARM_ALU_PC_G1_NC
2961 ENUMX
2962   BFD_RELOC_ARM_ALU_PC_G1
2963 ENUMX
2964   BFD_RELOC_ARM_ALU_PC_G2
2965 ENUMX
2966   BFD_RELOC_ARM_LDR_PC_G0
2967 ENUMX
2968   BFD_RELOC_ARM_LDR_PC_G1
2969 ENUMX
2970   BFD_RELOC_ARM_LDR_PC_G2
2971 ENUMX
2972   BFD_RELOC_ARM_LDRS_PC_G0
2973 ENUMX
2974   BFD_RELOC_ARM_LDRS_PC_G1
2975 ENUMX
2976   BFD_RELOC_ARM_LDRS_PC_G2
2977 ENUMX
2978   BFD_RELOC_ARM_LDC_PC_G0
2979 ENUMX
2980   BFD_RELOC_ARM_LDC_PC_G1
2981 ENUMX
2982   BFD_RELOC_ARM_LDC_PC_G2
2983 ENUMX
2984   BFD_RELOC_ARM_ALU_SB_G0_NC
2985 ENUMX
2986   BFD_RELOC_ARM_ALU_SB_G0
2987 ENUMX
2988   BFD_RELOC_ARM_ALU_SB_G1_NC
2989 ENUMX
2990   BFD_RELOC_ARM_ALU_SB_G1
2991 ENUMX
2992   BFD_RELOC_ARM_ALU_SB_G2
2993 ENUMX
2994   BFD_RELOC_ARM_LDR_SB_G0
2995 ENUMX
2996   BFD_RELOC_ARM_LDR_SB_G1
2997 ENUMX
2998   BFD_RELOC_ARM_LDR_SB_G2
2999 ENUMX
3000   BFD_RELOC_ARM_LDRS_SB_G0
3001 ENUMX
3002   BFD_RELOC_ARM_LDRS_SB_G1
3003 ENUMX
3004   BFD_RELOC_ARM_LDRS_SB_G2
3005 ENUMX
3006   BFD_RELOC_ARM_LDC_SB_G0
3007 ENUMX
3008   BFD_RELOC_ARM_LDC_SB_G1
3009 ENUMX
3010   BFD_RELOC_ARM_LDC_SB_G2
3011 ENUMDOC
3012   ARM group relocations.
3013
3014 ENUM
3015   BFD_RELOC_ARM_V4BX
3016 ENUMDOC
3017   Annotation of BX instructions.
3018
3019 ENUM
3020   BFD_RELOC_ARM_IMMEDIATE
3021 ENUMX
3022   BFD_RELOC_ARM_ADRL_IMMEDIATE
3023 ENUMX
3024   BFD_RELOC_ARM_T32_IMMEDIATE
3025 ENUMX
3026   BFD_RELOC_ARM_T32_ADD_IMM
3027 ENUMX
3028   BFD_RELOC_ARM_T32_IMM12
3029 ENUMX
3030   BFD_RELOC_ARM_T32_ADD_PC12
3031 ENUMX
3032   BFD_RELOC_ARM_SHIFT_IMM
3033 ENUMX
3034   BFD_RELOC_ARM_SMC
3035 ENUMX
3036   BFD_RELOC_ARM_SWI
3037 ENUMX
3038   BFD_RELOC_ARM_MULTI
3039 ENUMX
3040   BFD_RELOC_ARM_CP_OFF_IMM
3041 ENUMX
3042   BFD_RELOC_ARM_CP_OFF_IMM_S2
3043 ENUMX
3044   BFD_RELOC_ARM_T32_CP_OFF_IMM
3045 ENUMX
3046   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3047 ENUMX
3048   BFD_RELOC_ARM_ADR_IMM
3049 ENUMX
3050   BFD_RELOC_ARM_LDR_IMM
3051 ENUMX
3052   BFD_RELOC_ARM_LITERAL
3053 ENUMX
3054   BFD_RELOC_ARM_IN_POOL
3055 ENUMX
3056   BFD_RELOC_ARM_OFFSET_IMM8
3057 ENUMX
3058   BFD_RELOC_ARM_T32_OFFSET_U8
3059 ENUMX
3060   BFD_RELOC_ARM_T32_OFFSET_IMM
3061 ENUMX
3062   BFD_RELOC_ARM_HWLITERAL
3063 ENUMX
3064   BFD_RELOC_ARM_THUMB_ADD
3065 ENUMX
3066   BFD_RELOC_ARM_THUMB_IMM
3067 ENUMX
3068   BFD_RELOC_ARM_THUMB_SHIFT
3069 ENUMDOC
3070   These relocs are only used within the ARM assembler.  They are not
3071   (at present) written to any object files.
3072
3073 ENUM
3074   BFD_RELOC_SH_PCDISP8BY2
3075 ENUMX
3076   BFD_RELOC_SH_PCDISP12BY2
3077 ENUMX
3078   BFD_RELOC_SH_IMM3
3079 ENUMX
3080   BFD_RELOC_SH_IMM3U
3081 ENUMX
3082   BFD_RELOC_SH_DISP12
3083 ENUMX
3084   BFD_RELOC_SH_DISP12BY2
3085 ENUMX
3086   BFD_RELOC_SH_DISP12BY4
3087 ENUMX
3088   BFD_RELOC_SH_DISP12BY8
3089 ENUMX
3090   BFD_RELOC_SH_DISP20
3091 ENUMX
3092   BFD_RELOC_SH_DISP20BY8
3093 ENUMX
3094   BFD_RELOC_SH_IMM4
3095 ENUMX
3096   BFD_RELOC_SH_IMM4BY2
3097 ENUMX
3098   BFD_RELOC_SH_IMM4BY4
3099 ENUMX
3100   BFD_RELOC_SH_IMM8
3101 ENUMX
3102   BFD_RELOC_SH_IMM8BY2
3103 ENUMX
3104   BFD_RELOC_SH_IMM8BY4
3105 ENUMX
3106   BFD_RELOC_SH_PCRELIMM8BY2
3107 ENUMX
3108   BFD_RELOC_SH_PCRELIMM8BY4
3109 ENUMX
3110   BFD_RELOC_SH_SWITCH16
3111 ENUMX
3112   BFD_RELOC_SH_SWITCH32
3113 ENUMX
3114   BFD_RELOC_SH_USES
3115 ENUMX
3116   BFD_RELOC_SH_COUNT
3117 ENUMX
3118   BFD_RELOC_SH_ALIGN
3119 ENUMX
3120   BFD_RELOC_SH_CODE
3121 ENUMX
3122   BFD_RELOC_SH_DATA
3123 ENUMX
3124   BFD_RELOC_SH_LABEL
3125 ENUMX
3126   BFD_RELOC_SH_LOOP_START
3127 ENUMX
3128   BFD_RELOC_SH_LOOP_END
3129 ENUMX
3130   BFD_RELOC_SH_COPY
3131 ENUMX
3132   BFD_RELOC_SH_GLOB_DAT
3133 ENUMX
3134   BFD_RELOC_SH_JMP_SLOT
3135 ENUMX
3136   BFD_RELOC_SH_RELATIVE
3137 ENUMX
3138   BFD_RELOC_SH_GOTPC
3139 ENUMX
3140   BFD_RELOC_SH_GOT_LOW16
3141 ENUMX
3142   BFD_RELOC_SH_GOT_MEDLOW16
3143 ENUMX
3144   BFD_RELOC_SH_GOT_MEDHI16
3145 ENUMX
3146   BFD_RELOC_SH_GOT_HI16
3147 ENUMX
3148   BFD_RELOC_SH_GOTPLT_LOW16
3149 ENUMX
3150   BFD_RELOC_SH_GOTPLT_MEDLOW16
3151 ENUMX
3152   BFD_RELOC_SH_GOTPLT_MEDHI16
3153 ENUMX
3154   BFD_RELOC_SH_GOTPLT_HI16
3155 ENUMX
3156   BFD_RELOC_SH_PLT_LOW16
3157 ENUMX
3158   BFD_RELOC_SH_PLT_MEDLOW16
3159 ENUMX
3160   BFD_RELOC_SH_PLT_MEDHI16
3161 ENUMX
3162   BFD_RELOC_SH_PLT_HI16
3163 ENUMX
3164   BFD_RELOC_SH_GOTOFF_LOW16
3165 ENUMX
3166   BFD_RELOC_SH_GOTOFF_MEDLOW16
3167 ENUMX
3168   BFD_RELOC_SH_GOTOFF_MEDHI16
3169 ENUMX
3170   BFD_RELOC_SH_GOTOFF_HI16
3171 ENUMX
3172   BFD_RELOC_SH_GOTPC_LOW16
3173 ENUMX
3174   BFD_RELOC_SH_GOTPC_MEDLOW16
3175 ENUMX
3176   BFD_RELOC_SH_GOTPC_MEDHI16
3177 ENUMX
3178   BFD_RELOC_SH_GOTPC_HI16
3179 ENUMX
3180   BFD_RELOC_SH_COPY64
3181 ENUMX
3182   BFD_RELOC_SH_GLOB_DAT64
3183 ENUMX
3184   BFD_RELOC_SH_JMP_SLOT64
3185 ENUMX
3186   BFD_RELOC_SH_RELATIVE64
3187 ENUMX
3188   BFD_RELOC_SH_GOT10BY4
3189 ENUMX
3190   BFD_RELOC_SH_GOT10BY8
3191 ENUMX
3192   BFD_RELOC_SH_GOTPLT10BY4
3193 ENUMX
3194   BFD_RELOC_SH_GOTPLT10BY8
3195 ENUMX
3196   BFD_RELOC_SH_GOTPLT32
3197 ENUMX
3198   BFD_RELOC_SH_SHMEDIA_CODE
3199 ENUMX
3200   BFD_RELOC_SH_IMMU5
3201 ENUMX
3202   BFD_RELOC_SH_IMMS6
3203 ENUMX
3204   BFD_RELOC_SH_IMMS6BY32
3205 ENUMX
3206   BFD_RELOC_SH_IMMU6
3207 ENUMX
3208   BFD_RELOC_SH_IMMS10
3209 ENUMX
3210   BFD_RELOC_SH_IMMS10BY2
3211 ENUMX
3212   BFD_RELOC_SH_IMMS10BY4
3213 ENUMX
3214   BFD_RELOC_SH_IMMS10BY8
3215 ENUMX
3216   BFD_RELOC_SH_IMMS16
3217 ENUMX
3218   BFD_RELOC_SH_IMMU16
3219 ENUMX
3220   BFD_RELOC_SH_IMM_LOW16
3221 ENUMX
3222   BFD_RELOC_SH_IMM_LOW16_PCREL
3223 ENUMX
3224   BFD_RELOC_SH_IMM_MEDLOW16
3225 ENUMX
3226   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3227 ENUMX
3228   BFD_RELOC_SH_IMM_MEDHI16
3229 ENUMX
3230   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3231 ENUMX
3232   BFD_RELOC_SH_IMM_HI16
3233 ENUMX
3234   BFD_RELOC_SH_IMM_HI16_PCREL
3235 ENUMX
3236   BFD_RELOC_SH_PT_16
3237 ENUMX
3238   BFD_RELOC_SH_TLS_GD_32
3239 ENUMX
3240   BFD_RELOC_SH_TLS_LD_32
3241 ENUMX
3242   BFD_RELOC_SH_TLS_LDO_32
3243 ENUMX
3244   BFD_RELOC_SH_TLS_IE_32
3245 ENUMX
3246   BFD_RELOC_SH_TLS_LE_32
3247 ENUMX
3248   BFD_RELOC_SH_TLS_DTPMOD32
3249 ENUMX
3250   BFD_RELOC_SH_TLS_DTPOFF32
3251 ENUMX
3252   BFD_RELOC_SH_TLS_TPOFF32
3253 ENUMDOC
3254   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3255
3256 ENUM
3257   BFD_RELOC_ARC_B22_PCREL
3258 ENUMDOC
3259   ARC Cores relocs.
3260   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3261   not stored in the instruction.  The high 20 bits are installed in bits 26
3262   through 7 of the instruction.
3263 ENUM
3264   BFD_RELOC_ARC_B26
3265 ENUMDOC
3266   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3267   stored in the instruction.  The high 24 bits are installed in bits 23
3268   through 0.
3269
3270 ENUM
3271   BFD_RELOC_BFIN_16_IMM
3272 ENUMDOC
3273   ADI Blackfin 16 bit immediate absolute reloc.
3274 ENUM
3275   BFD_RELOC_BFIN_16_HIGH
3276 ENUMDOC
3277   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3278 ENUM
3279   BFD_RELOC_BFIN_4_PCREL
3280 ENUMDOC
3281   ADI Blackfin 'a' part of LSETUP.
3282 ENUM
3283   BFD_RELOC_BFIN_5_PCREL
3284 ENUMDOC
3285   ADI Blackfin.
3286 ENUM
3287   BFD_RELOC_BFIN_16_LOW
3288 ENUMDOC
3289   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3290 ENUM
3291   BFD_RELOC_BFIN_10_PCREL
3292 ENUMDOC
3293   ADI Blackfin.
3294 ENUM
3295   BFD_RELOC_BFIN_11_PCREL
3296 ENUMDOC
3297   ADI Blackfin 'b' part of LSETUP.
3298 ENUM
3299   BFD_RELOC_BFIN_12_PCREL_JUMP
3300 ENUMDOC
3301   ADI Blackfin.
3302 ENUM
3303   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3304 ENUMDOC
3305   ADI Blackfin Short jump, pcrel.
3306 ENUM
3307   BFD_RELOC_BFIN_24_PCREL_CALL_X
3308 ENUMDOC
3309   ADI Blackfin Call.x not implemented.
3310 ENUM
3311   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3312 ENUMDOC
3313   ADI Blackfin Long Jump pcrel.
3314 ENUM
3315   BFD_RELOC_BFIN_GOT17M4
3316 ENUMX
3317   BFD_RELOC_BFIN_GOTHI
3318 ENUMX
3319   BFD_RELOC_BFIN_GOTLO
3320 ENUMX
3321   BFD_RELOC_BFIN_FUNCDESC
3322 ENUMX
3323   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3324 ENUMX
3325   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3326 ENUMX
3327   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3328 ENUMX
3329   BFD_RELOC_BFIN_FUNCDESC_VALUE
3330 ENUMX
3331   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3332 ENUMX
3333   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3334 ENUMX
3335   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3336 ENUMX
3337   BFD_RELOC_BFIN_GOTOFF17M4
3338 ENUMX
3339   BFD_RELOC_BFIN_GOTOFFHI
3340 ENUMX
3341   BFD_RELOC_BFIN_GOTOFFLO
3342 ENUMDOC
3343   ADI Blackfin FD-PIC relocations.
3344 ENUM
3345   BFD_RELOC_BFIN_GOT
3346 ENUMDOC
3347   ADI Blackfin GOT relocation.
3348 ENUM
3349   BFD_RELOC_BFIN_PLTPC
3350 ENUMDOC
3351   ADI Blackfin PLTPC relocation.
3352 ENUM
3353   BFD_ARELOC_BFIN_PUSH
3354 ENUMDOC
3355   ADI Blackfin arithmetic relocation.
3356 ENUM
3357   BFD_ARELOC_BFIN_CONST
3358 ENUMDOC
3359   ADI Blackfin arithmetic relocation.
3360 ENUM
3361   BFD_ARELOC_BFIN_ADD
3362 ENUMDOC
3363   ADI Blackfin arithmetic relocation.
3364 ENUM
3365   BFD_ARELOC_BFIN_SUB
3366 ENUMDOC
3367   ADI Blackfin arithmetic relocation.
3368 ENUM
3369   BFD_ARELOC_BFIN_MULT
3370 ENUMDOC
3371   ADI Blackfin arithmetic relocation.
3372 ENUM
3373   BFD_ARELOC_BFIN_DIV
3374 ENUMDOC
3375   ADI Blackfin arithmetic relocation.
3376 ENUM
3377   BFD_ARELOC_BFIN_MOD
3378 ENUMDOC
3379   ADI Blackfin arithmetic relocation.
3380 ENUM
3381   BFD_ARELOC_BFIN_LSHIFT
3382 ENUMDOC
3383   ADI Blackfin arithmetic relocation.
3384 ENUM
3385   BFD_ARELOC_BFIN_RSHIFT
3386 ENUMDOC
3387   ADI Blackfin arithmetic relocation.
3388 ENUM
3389   BFD_ARELOC_BFIN_AND
3390 ENUMDOC
3391   ADI Blackfin arithmetic relocation.
3392 ENUM
3393   BFD_ARELOC_BFIN_OR
3394 ENUMDOC
3395   ADI Blackfin arithmetic relocation.
3396 ENUM
3397   BFD_ARELOC_BFIN_XOR
3398 ENUMDOC
3399   ADI Blackfin arithmetic relocation.
3400 ENUM
3401   BFD_ARELOC_BFIN_LAND
3402 ENUMDOC
3403   ADI Blackfin arithmetic relocation.
3404 ENUM
3405   BFD_ARELOC_BFIN_LOR
3406 ENUMDOC
3407   ADI Blackfin arithmetic relocation.
3408 ENUM
3409   BFD_ARELOC_BFIN_LEN
3410 ENUMDOC
3411   ADI Blackfin arithmetic relocation.
3412 ENUM
3413   BFD_ARELOC_BFIN_NEG
3414 ENUMDOC
3415   ADI Blackfin arithmetic relocation.
3416 ENUM
3417   BFD_ARELOC_BFIN_COMP
3418 ENUMDOC
3419   ADI Blackfin arithmetic relocation.
3420 ENUM
3421   BFD_ARELOC_BFIN_PAGE
3422 ENUMDOC
3423   ADI Blackfin arithmetic relocation.
3424 ENUM
3425   BFD_ARELOC_BFIN_HWPAGE
3426 ENUMDOC
3427   ADI Blackfin arithmetic relocation.
3428 ENUM
3429   BFD_ARELOC_BFIN_ADDR
3430 ENUMDOC
3431   ADI Blackfin arithmetic relocation.
3432
3433 ENUM
3434   BFD_RELOC_D10V_10_PCREL_R
3435 ENUMDOC
3436   Mitsubishi D10V relocs.
3437   This is a 10-bit reloc with the right 2 bits
3438   assumed to be 0.
3439 ENUM
3440   BFD_RELOC_D10V_10_PCREL_L
3441 ENUMDOC
3442   Mitsubishi D10V relocs.
3443   This is a 10-bit reloc with the right 2 bits
3444   assumed to be 0.  This is the same as the previous reloc
3445   except it is in the left container, i.e.,
3446   shifted left 15 bits.
3447 ENUM
3448   BFD_RELOC_D10V_18
3449 ENUMDOC
3450   This is an 18-bit reloc with the right 2 bits
3451   assumed to be 0.
3452 ENUM
3453   BFD_RELOC_D10V_18_PCREL
3454 ENUMDOC
3455   This is an 18-bit reloc with the right 2 bits
3456   assumed to be 0.
3457
3458 ENUM
3459   BFD_RELOC_D30V_6
3460 ENUMDOC
3461   Mitsubishi D30V relocs.
3462   This is a 6-bit absolute reloc.
3463 ENUM
3464   BFD_RELOC_D30V_9_PCREL
3465 ENUMDOC
3466   This is a 6-bit pc-relative reloc with
3467   the right 3 bits assumed to be 0.
3468 ENUM
3469   BFD_RELOC_D30V_9_PCREL_R
3470 ENUMDOC
3471   This is a 6-bit pc-relative reloc with
3472   the right 3 bits assumed to be 0. Same
3473   as the previous reloc but on the right side
3474   of the container.
3475 ENUM
3476   BFD_RELOC_D30V_15
3477 ENUMDOC
3478   This is a 12-bit absolute reloc with the
3479   right 3 bitsassumed to be 0.
3480 ENUM
3481   BFD_RELOC_D30V_15_PCREL
3482 ENUMDOC
3483   This is a 12-bit pc-relative reloc with
3484   the right 3 bits assumed to be 0.
3485 ENUM
3486   BFD_RELOC_D30V_15_PCREL_R
3487 ENUMDOC
3488   This is a 12-bit pc-relative reloc with
3489   the right 3 bits assumed to be 0. Same
3490   as the previous reloc but on the right side
3491   of the container.
3492 ENUM
3493   BFD_RELOC_D30V_21
3494 ENUMDOC
3495   This is an 18-bit absolute reloc with
3496   the right 3 bits assumed to be 0.
3497 ENUM
3498   BFD_RELOC_D30V_21_PCREL
3499 ENUMDOC
3500   This is an 18-bit pc-relative reloc with
3501   the right 3 bits assumed to be 0.
3502 ENUM
3503   BFD_RELOC_D30V_21_PCREL_R
3504 ENUMDOC
3505   This is an 18-bit pc-relative reloc with
3506   the right 3 bits assumed to be 0. Same
3507   as the previous reloc but on the right side
3508   of the container.
3509 ENUM
3510   BFD_RELOC_D30V_32
3511 ENUMDOC
3512   This is a 32-bit absolute reloc.
3513 ENUM
3514   BFD_RELOC_D30V_32_PCREL
3515 ENUMDOC
3516   This is a 32-bit pc-relative reloc.
3517
3518 ENUM
3519   BFD_RELOC_DLX_HI16_S
3520 ENUMDOC
3521   DLX relocs
3522 ENUM
3523   BFD_RELOC_DLX_LO16
3524 ENUMDOC
3525   DLX relocs
3526 ENUM
3527   BFD_RELOC_DLX_JMP26
3528 ENUMDOC
3529   DLX relocs
3530
3531 ENUM
3532   BFD_RELOC_M32C_HI8
3533 ENUMX
3534   BFD_RELOC_M32C_RL_JUMP
3535 ENUMX
3536   BFD_RELOC_M32C_RL_1ADDR
3537 ENUMX
3538   BFD_RELOC_M32C_RL_2ADDR
3539 ENUMDOC
3540   Renesas M16C/M32C Relocations.
3541
3542 ENUM
3543   BFD_RELOC_M32R_24
3544 ENUMDOC
3545   Renesas M32R (formerly Mitsubishi M32R) relocs.
3546   This is a 24 bit absolute address.
3547 ENUM
3548   BFD_RELOC_M32R_10_PCREL
3549 ENUMDOC
3550   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3551 ENUM
3552   BFD_RELOC_M32R_18_PCREL
3553 ENUMDOC
3554   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3555 ENUM
3556   BFD_RELOC_M32R_26_PCREL
3557 ENUMDOC
3558   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3559 ENUM
3560   BFD_RELOC_M32R_HI16_ULO
3561 ENUMDOC
3562   This is a 16-bit reloc containing the high 16 bits of an address
3563   used when the lower 16 bits are treated as unsigned.
3564 ENUM
3565   BFD_RELOC_M32R_HI16_SLO
3566 ENUMDOC
3567   This is a 16-bit reloc containing the high 16 bits of an address
3568   used when the lower 16 bits are treated as signed.
3569 ENUM
3570   BFD_RELOC_M32R_LO16
3571 ENUMDOC
3572   This is a 16-bit reloc containing the lower 16 bits of an address.
3573 ENUM
3574   BFD_RELOC_M32R_SDA16
3575 ENUMDOC
3576   This is a 16-bit reloc containing the small data area offset for use in
3577   add3, load, and store instructions.
3578 ENUM
3579   BFD_RELOC_M32R_GOT24
3580 ENUMX
3581   BFD_RELOC_M32R_26_PLTREL
3582 ENUMX
3583   BFD_RELOC_M32R_COPY
3584 ENUMX
3585   BFD_RELOC_M32R_GLOB_DAT
3586 ENUMX
3587   BFD_RELOC_M32R_JMP_SLOT
3588 ENUMX
3589   BFD_RELOC_M32R_RELATIVE
3590 ENUMX
3591   BFD_RELOC_M32R_GOTOFF
3592 ENUMX
3593   BFD_RELOC_M32R_GOTOFF_HI_ULO
3594 ENUMX
3595   BFD_RELOC_M32R_GOTOFF_HI_SLO
3596 ENUMX
3597   BFD_RELOC_M32R_GOTOFF_LO
3598 ENUMX
3599   BFD_RELOC_M32R_GOTPC24
3600 ENUMX
3601   BFD_RELOC_M32R_GOT16_HI_ULO
3602 ENUMX
3603   BFD_RELOC_M32R_GOT16_HI_SLO
3604 ENUMX
3605   BFD_RELOC_M32R_GOT16_LO
3606 ENUMX
3607   BFD_RELOC_M32R_GOTPC_HI_ULO
3608 ENUMX
3609   BFD_RELOC_M32R_GOTPC_HI_SLO
3610 ENUMX
3611   BFD_RELOC_M32R_GOTPC_LO
3612 ENUMDOC
3613   For PIC.
3614
3615
3616 ENUM
3617   BFD_RELOC_V850_9_PCREL
3618 ENUMDOC
3619   This is a 9-bit reloc
3620 ENUM
3621   BFD_RELOC_V850_22_PCREL
3622 ENUMDOC
3623   This is a 22-bit reloc
3624
3625 ENUM
3626   BFD_RELOC_V850_SDA_16_16_OFFSET
3627 ENUMDOC
3628   This is a 16 bit offset from the short data area pointer.
3629 ENUM
3630   BFD_RELOC_V850_SDA_15_16_OFFSET
3631 ENUMDOC
3632   This is a 16 bit offset (of which only 15 bits are used) from the
3633   short data area pointer.
3634 ENUM
3635   BFD_RELOC_V850_ZDA_16_16_OFFSET
3636 ENUMDOC
3637   This is a 16 bit offset from the zero data area pointer.
3638 ENUM
3639   BFD_RELOC_V850_ZDA_15_16_OFFSET
3640 ENUMDOC
3641   This is a 16 bit offset (of which only 15 bits are used) from the
3642   zero data area pointer.
3643 ENUM
3644   BFD_RELOC_V850_TDA_6_8_OFFSET
3645 ENUMDOC
3646   This is an 8 bit offset (of which only 6 bits are used) from the
3647   tiny data area pointer.
3648 ENUM
3649   BFD_RELOC_V850_TDA_7_8_OFFSET
3650 ENUMDOC
3651   This is an 8bit offset (of which only 7 bits are used) from the tiny
3652   data area pointer.
3653 ENUM
3654   BFD_RELOC_V850_TDA_7_7_OFFSET
3655 ENUMDOC
3656   This is a 7 bit offset from the tiny data area pointer.
3657 ENUM
3658   BFD_RELOC_V850_TDA_16_16_OFFSET
3659 ENUMDOC
3660   This is a 16 bit offset from the tiny data area pointer.
3661 COMMENT
3662 ENUM
3663   BFD_RELOC_V850_TDA_4_5_OFFSET
3664 ENUMDOC
3665   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3666   data area pointer.
3667 ENUM
3668   BFD_RELOC_V850_TDA_4_4_OFFSET
3669 ENUMDOC
3670   This is a 4 bit offset from the tiny data area pointer.
3671 ENUM
3672   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3673 ENUMDOC
3674   This is a 16 bit offset from the short data area pointer, with the
3675   bits placed non-contiguously in the instruction.
3676 ENUM
3677   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3678 ENUMDOC
3679   This is a 16 bit offset from the zero data area pointer, with the
3680   bits placed non-contiguously in the instruction.
3681 ENUM
3682   BFD_RELOC_V850_CALLT_6_7_OFFSET
3683 ENUMDOC
3684   This is a 6 bit offset from the call table base pointer.
3685 ENUM
3686   BFD_RELOC_V850_CALLT_16_16_OFFSET
3687 ENUMDOC
3688   This is a 16 bit offset from the call table base pointer.
3689 ENUM
3690   BFD_RELOC_V850_LONGCALL
3691 ENUMDOC
3692   Used for relaxing indirect function calls.
3693 ENUM
3694   BFD_RELOC_V850_LONGJUMP
3695 ENUMDOC
3696   Used for relaxing indirect jumps.
3697 ENUM
3698   BFD_RELOC_V850_ALIGN
3699 ENUMDOC
3700   Used to maintain alignment whilst relaxing.
3701 ENUM
3702   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3703 ENUMDOC
3704   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3705   instructions.
3706 ENUM
3707   BFD_RELOC_MN10300_32_PCREL
3708 ENUMDOC
3709   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3710   instruction.
3711 ENUM
3712   BFD_RELOC_MN10300_16_PCREL
3713 ENUMDOC
3714   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3715   instruction.
3716
3717 ENUM
3718   BFD_RELOC_TIC30_LDP
3719 ENUMDOC
3720   This is a 8bit DP reloc for the tms320c30, where the most
3721   significant 8 bits of a 24 bit word are placed into the least
3722   significant 8 bits of the opcode.
3723
3724 ENUM
3725   BFD_RELOC_TIC54X_PARTLS7
3726 ENUMDOC
3727   This is a 7bit reloc for the tms320c54x, where the least
3728   significant 7 bits of a 16 bit word are placed into the least
3729   significant 7 bits of the opcode.
3730
3731 ENUM
3732   BFD_RELOC_TIC54X_PARTMS9
3733 ENUMDOC
3734   This is a 9bit DP reloc for the tms320c54x, where the most
3735   significant 9 bits of a 16 bit word are placed into the least
3736   significant 9 bits of the opcode.
3737
3738 ENUM
3739   BFD_RELOC_TIC54X_23
3740 ENUMDOC
3741   This is an extended address 23-bit reloc for the tms320c54x.
3742
3743 ENUM
3744   BFD_RELOC_TIC54X_16_OF_23
3745 ENUMDOC
3746   This is a 16-bit reloc for the tms320c54x, where the least
3747   significant 16 bits of a 23-bit extended address are placed into
3748   the opcode.
3749
3750 ENUM
3751   BFD_RELOC_TIC54X_MS7_OF_23
3752 ENUMDOC
3753   This is a reloc for the tms320c54x, where the most
3754   significant 7 bits of a 23-bit extended address are placed into
3755   the opcode.
3756
3757 ENUM
3758   BFD_RELOC_FR30_48
3759 ENUMDOC
3760   This is a 48 bit reloc for the FR30 that stores 32 bits.
3761 ENUM
3762   BFD_RELOC_FR30_20
3763 ENUMDOC
3764   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3765   two sections.
3766 ENUM
3767   BFD_RELOC_FR30_6_IN_4
3768 ENUMDOC
3769   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3770   4 bits.
3771 ENUM
3772   BFD_RELOC_FR30_8_IN_8
3773 ENUMDOC
3774   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3775   into 8 bits.
3776 ENUM
3777   BFD_RELOC_FR30_9_IN_8
3778 ENUMDOC
3779   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3780   into 8 bits.
3781 ENUM
3782   BFD_RELOC_FR30_10_IN_8
3783 ENUMDOC
3784   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3785   into 8 bits.
3786 ENUM
3787   BFD_RELOC_FR30_9_PCREL
3788 ENUMDOC
3789   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3790   short offset into 8 bits.
3791 ENUM
3792   BFD_RELOC_FR30_12_PCREL
3793 ENUMDOC
3794   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3795   short offset into 11 bits.
3796
3797 ENUM
3798   BFD_RELOC_MCORE_PCREL_IMM8BY4
3799 ENUMX
3800   BFD_RELOC_MCORE_PCREL_IMM11BY2
3801 ENUMX
3802   BFD_RELOC_MCORE_PCREL_IMM4BY2
3803 ENUMX
3804   BFD_RELOC_MCORE_PCREL_32
3805 ENUMX
3806   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3807 ENUMX
3808   BFD_RELOC_MCORE_RVA
3809 ENUMDOC
3810   Motorola Mcore relocations.
3811
3812 ENUM
3813   BFD_RELOC_MEP_8
3814 ENUMX
3815   BFD_RELOC_MEP_16
3816 ENUMX
3817   BFD_RELOC_MEP_32
3818 ENUMX
3819   BFD_RELOC_MEP_PCREL8A2
3820 ENUMX
3821   BFD_RELOC_MEP_PCREL12A2
3822 ENUMX
3823   BFD_RELOC_MEP_PCREL17A2
3824 ENUMX
3825   BFD_RELOC_MEP_PCREL24A2
3826 ENUMX
3827   BFD_RELOC_MEP_PCABS24A2
3828 ENUMX
3829   BFD_RELOC_MEP_LOW16
3830 ENUMX
3831   BFD_RELOC_MEP_HI16U
3832 ENUMX
3833   BFD_RELOC_MEP_HI16S
3834 ENUMX
3835   BFD_RELOC_MEP_GPREL
3836 ENUMX
3837   BFD_RELOC_MEP_TPREL
3838 ENUMX
3839   BFD_RELOC_MEP_TPREL7
3840 ENUMX
3841   BFD_RELOC_MEP_TPREL7A2
3842 ENUMX
3843   BFD_RELOC_MEP_TPREL7A4
3844 ENUMX
3845   BFD_RELOC_MEP_UIMM24
3846 ENUMX
3847   BFD_RELOC_MEP_ADDR24A4
3848 ENUMX
3849   BFD_RELOC_MEP_GNU_VTINHERIT
3850 ENUMX
3851   BFD_RELOC_MEP_GNU_VTENTRY
3852 ENUMDOC
3853   Toshiba Media Processor Relocations.
3854 COMMENT
3855
3856 ENUM
3857   BFD_RELOC_MMIX_GETA
3858 ENUMX
3859   BFD_RELOC_MMIX_GETA_1
3860 ENUMX
3861   BFD_RELOC_MMIX_GETA_2
3862 ENUMX
3863   BFD_RELOC_MMIX_GETA_3
3864 ENUMDOC
3865   These are relocations for the GETA instruction.
3866 ENUM
3867   BFD_RELOC_MMIX_CBRANCH
3868 ENUMX
3869   BFD_RELOC_MMIX_CBRANCH_J
3870 ENUMX
3871   BFD_RELOC_MMIX_CBRANCH_1
3872 ENUMX
3873   BFD_RELOC_MMIX_CBRANCH_2
3874 ENUMX
3875   BFD_RELOC_MMIX_CBRANCH_3
3876 ENUMDOC
3877   These are relocations for a conditional branch instruction.
3878 ENUM
3879   BFD_RELOC_MMIX_PUSHJ
3880 ENUMX
3881   BFD_RELOC_MMIX_PUSHJ_1
3882 ENUMX
3883   BFD_RELOC_MMIX_PUSHJ_2
3884 ENUMX
3885   BFD_RELOC_MMIX_PUSHJ_3
3886 ENUMX
3887   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
3888 ENUMDOC
3889   These are relocations for the PUSHJ instruction.
3890 ENUM
3891   BFD_RELOC_MMIX_JMP
3892 ENUMX
3893   BFD_RELOC_MMIX_JMP_1
3894 ENUMX
3895   BFD_RELOC_MMIX_JMP_2
3896 ENUMX
3897   BFD_RELOC_MMIX_JMP_3
3898 ENUMDOC
3899   These are relocations for the JMP instruction.
3900 ENUM
3901   BFD_RELOC_MMIX_ADDR19
3902 ENUMDOC
3903   This is a relocation for a relative address as in a GETA instruction or
3904   a branch.
3905 ENUM
3906   BFD_RELOC_MMIX_ADDR27
3907 ENUMDOC
3908   This is a relocation for a relative address as in a JMP instruction.
3909 ENUM
3910   BFD_RELOC_MMIX_REG_OR_BYTE
3911 ENUMDOC
3912   This is a relocation for an instruction field that may be a general
3913   register or a value 0..255.
3914 ENUM
3915   BFD_RELOC_MMIX_REG
3916 ENUMDOC
3917   This is a relocation for an instruction field that may be a general
3918   register.
3919 ENUM
3920   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
3921 ENUMDOC
3922   This is a relocation for two instruction fields holding a register and
3923   an offset, the equivalent of the relocation.
3924 ENUM
3925   BFD_RELOC_MMIX_LOCAL
3926 ENUMDOC
3927   This relocation is an assertion that the expression is not allocated as
3928   a global register.  It does not modify contents.
3929
3930 ENUM
3931   BFD_RELOC_AVR_7_PCREL
3932 ENUMDOC
3933   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
3934   short offset into 7 bits.
3935 ENUM
3936   BFD_RELOC_AVR_13_PCREL
3937 ENUMDOC
3938   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
3939   short offset into 12 bits.
3940 ENUM
3941   BFD_RELOC_AVR_16_PM
3942 ENUMDOC
3943   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
3944   program memory address) into 16 bits.
3945 ENUM
3946   BFD_RELOC_AVR_LO8_LDI
3947 ENUMDOC
3948   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3949   data memory address) into 8 bit immediate value of LDI insn.
3950 ENUM
3951   BFD_RELOC_AVR_HI8_LDI
3952 ENUMDOC
3953   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3954   of data memory address) into 8 bit immediate value of LDI insn.
3955 ENUM
3956   BFD_RELOC_AVR_HH8_LDI
3957 ENUMDOC
3958   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3959   of program memory address) into 8 bit immediate value of LDI insn.
3960 ENUM
3961   BFD_RELOC_AVR_MS8_LDI
3962 ENUMDOC
3963   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3964   of 32 bit value) into 8 bit immediate value of LDI insn.
3965 ENUM
3966   BFD_RELOC_AVR_LO8_LDI_NEG
3967 ENUMDOC
3968   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3969   (usually data memory address) into 8 bit immediate value of SUBI insn.
3970 ENUM
3971   BFD_RELOC_AVR_HI8_LDI_NEG
3972 ENUMDOC
3973   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3974   (high 8 bit of data memory address) into 8 bit immediate value of
3975   SUBI insn.
3976 ENUM
3977   BFD_RELOC_AVR_HH8_LDI_NEG
3978 ENUMDOC
3979   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3980   (most high 8 bit of program memory address) into 8 bit immediate value
3981   of LDI or SUBI insn.
3982 ENUM
3983   BFD_RELOC_AVR_MS8_LDI_NEG
3984 ENUMDOC
3985   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
3986   of 32 bit value) into 8 bit immediate value of LDI insn.
3987 ENUM
3988   BFD_RELOC_AVR_LO8_LDI_PM
3989 ENUMDOC
3990   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3991   command address) into 8 bit immediate value of LDI insn.
3992 ENUM
3993   BFD_RELOC_AVR_LO8_LDI_GS
3994 ENUMDOC
3995   This is a 16 bit reloc for the AVR that stores 8 bit value
3996   (command address) into 8 bit immediate value of LDI insn. If the address
3997   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
3998   in the lower 128k.
3999 ENUM
4000   BFD_RELOC_AVR_HI8_LDI_PM
4001 ENUMDOC
4002   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4003   of command address) into 8 bit immediate value of LDI insn.
4004 ENUM
4005   BFD_RELOC_AVR_HI8_LDI_GS
4006 ENUMDOC
4007   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4008   of command address) into 8 bit immediate value of LDI insn.  If the address
4009   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4010   below 128k.
4011 ENUM
4012   BFD_RELOC_AVR_HH8_LDI_PM
4013 ENUMDOC
4014   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4015   of command address) into 8 bit immediate value of LDI insn.
4016 ENUM
4017   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4018 ENUMDOC
4019   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4020   (usually command address) into 8 bit immediate value of SUBI insn.
4021 ENUM
4022   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4023 ENUMDOC
4024   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4025   (high 8 bit of 16 bit command address) into 8 bit immediate value
4026   of SUBI insn.
4027 ENUM
4028   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4029 ENUMDOC
4030   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4031   (high 6 bit of 22 bit command address) into 8 bit immediate
4032   value of SUBI insn.
4033 ENUM
4034   BFD_RELOC_AVR_CALL
4035 ENUMDOC
4036   This is a 32 bit reloc for the AVR that stores 23 bit value
4037   into 22 bits.
4038 ENUM
4039   BFD_RELOC_AVR_LDI
4040 ENUMDOC
4041   This is a 16 bit reloc for the AVR that stores all needed bits
4042   for absolute addressing with ldi with overflow check to linktime
4043 ENUM
4044   BFD_RELOC_AVR_6
4045 ENUMDOC
4046   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4047   instructions
4048 ENUM
4049   BFD_RELOC_AVR_6_ADIW
4050 ENUMDOC
4051   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4052   instructions
4053
4054 ENUM
4055   BFD_RELOC_RX_NEG8
4056 ENUMX
4057   BFD_RELOC_RX_NEG16
4058 ENUMX
4059   BFD_RELOC_RX_NEG24
4060 ENUMX
4061   BFD_RELOC_RX_NEG32
4062 ENUMX
4063   BFD_RELOC_RX_16_OP
4064 ENUMX
4065   BFD_RELOC_RX_24_OP
4066 ENUMX
4067   BFD_RELOC_RX_32_OP
4068 ENUMX
4069   BFD_RELOC_RX_8U
4070 ENUMX
4071   BFD_RELOC_RX_16U
4072 ENUMX
4073   BFD_RELOC_RX_24U
4074 ENUMX
4075   BFD_RELOC_RX_DIR3U_PCREL
4076 ENUMX
4077   BFD_RELOC_RX_DIFF
4078 ENUMX
4079   BFD_RELOC_RX_GPRELB
4080 ENUMX
4081   BFD_RELOC_RX_GPRELW
4082 ENUMX
4083   BFD_RELOC_RX_GPRELL
4084 ENUMX
4085   BFD_RELOC_RX_SYM
4086 ENUMX
4087   BFD_RELOC_RX_OP_SUBTRACT
4088 ENUMX
4089   BFD_RELOC_RX_ABS8
4090 ENUMX
4091   BFD_RELOC_RX_ABS16
4092 ENUMX
4093   BFD_RELOC_RX_ABS32
4094 ENUMX
4095   BFD_RELOC_RX_ABS16U
4096 ENUMX
4097   BFD_RELOC_RX_ABS16UW
4098 ENUMX
4099   BFD_RELOC_RX_ABS16UL
4100 ENUMX
4101   BFD_RELOC_RX_RELAX
4102 ENUMDOC
4103   Renesas RX Relocations.
4104
4105 ENUM
4106   BFD_RELOC_390_12
4107 ENUMDOC
4108    Direct 12 bit.
4109 ENUM
4110   BFD_RELOC_390_GOT12
4111 ENUMDOC
4112   12 bit GOT offset.
4113 ENUM
4114   BFD_RELOC_390_PLT32
4115 ENUMDOC
4116   32 bit PC relative PLT address.
4117 ENUM
4118   BFD_RELOC_390_COPY
4119 ENUMDOC
4120   Copy symbol at runtime.
4121 ENUM
4122   BFD_RELOC_390_GLOB_DAT
4123 ENUMDOC
4124   Create GOT entry.
4125 ENUM
4126   BFD_RELOC_390_JMP_SLOT
4127 ENUMDOC
4128   Create PLT entry.
4129 ENUM
4130   BFD_RELOC_390_RELATIVE
4131 ENUMDOC
4132   Adjust by program base.
4133 ENUM
4134   BFD_RELOC_390_GOTPC
4135 ENUMDOC
4136   32 bit PC relative offset to GOT.
4137 ENUM
4138   BFD_RELOC_390_GOT16
4139 ENUMDOC
4140   16 bit GOT offset.
4141 ENUM
4142   BFD_RELOC_390_PC16DBL
4143 ENUMDOC
4144   PC relative 16 bit shifted by 1.
4145 ENUM
4146   BFD_RELOC_390_PLT16DBL
4147 ENUMDOC
4148   16 bit PC rel. PLT shifted by 1.
4149 ENUM
4150   BFD_RELOC_390_PC32DBL
4151 ENUMDOC
4152   PC relative 32 bit shifted by 1.
4153 ENUM
4154   BFD_RELOC_390_PLT32DBL
4155 ENUMDOC
4156   32 bit PC rel. PLT shifted by 1.
4157 ENUM
4158   BFD_RELOC_390_GOTPCDBL
4159 ENUMDOC
4160   32 bit PC rel. GOT shifted by 1.
4161 ENUM
4162   BFD_RELOC_390_GOT64
4163 ENUMDOC
4164   64 bit GOT offset.
4165 ENUM
4166   BFD_RELOC_390_PLT64
4167 ENUMDOC
4168   64 bit PC relative PLT address.
4169 ENUM
4170   BFD_RELOC_390_GOTENT
4171 ENUMDOC
4172   32 bit rel. offset to GOT entry.
4173 ENUM
4174   BFD_RELOC_390_GOTOFF64
4175 ENUMDOC
4176   64 bit offset to GOT.
4177 ENUM
4178   BFD_RELOC_390_GOTPLT12
4179 ENUMDOC
4180   12-bit offset to symbol-entry within GOT, with PLT handling.
4181 ENUM
4182   BFD_RELOC_390_GOTPLT16
4183 ENUMDOC
4184   16-bit offset to symbol-entry within GOT, with PLT handling.
4185 ENUM
4186   BFD_RELOC_390_GOTPLT32
4187 ENUMDOC
4188   32-bit offset to symbol-entry within GOT, with PLT handling.
4189 ENUM
4190   BFD_RELOC_390_GOTPLT64
4191 ENUMDOC
4192   64-bit offset to symbol-entry within GOT, with PLT handling.
4193 ENUM
4194   BFD_RELOC_390_GOTPLTENT
4195 ENUMDOC
4196   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4197 ENUM
4198   BFD_RELOC_390_PLTOFF16
4199 ENUMDOC
4200   16-bit rel. offset from the GOT to a PLT entry.
4201 ENUM
4202   BFD_RELOC_390_PLTOFF32
4203 ENUMDOC
4204   32-bit rel. offset from the GOT to a PLT entry.
4205 ENUM
4206   BFD_RELOC_390_PLTOFF64
4207 ENUMDOC
4208   64-bit rel. offset from the GOT to a PLT entry.
4209
4210 ENUM
4211   BFD_RELOC_390_TLS_LOAD
4212 ENUMX
4213   BFD_RELOC_390_TLS_GDCALL
4214 ENUMX
4215   BFD_RELOC_390_TLS_LDCALL
4216 ENUMX
4217   BFD_RELOC_390_TLS_GD32
4218 ENUMX
4219   BFD_RELOC_390_TLS_GD64
4220 ENUMX
4221   BFD_RELOC_390_TLS_GOTIE12
4222 ENUMX
4223   BFD_RELOC_390_TLS_GOTIE32
4224 ENUMX
4225   BFD_RELOC_390_TLS_GOTIE64
4226 ENUMX
4227   BFD_RELOC_390_TLS_LDM32
4228 ENUMX
4229   BFD_RELOC_390_TLS_LDM64
4230 ENUMX
4231   BFD_RELOC_390_TLS_IE32
4232 ENUMX
4233   BFD_RELOC_390_TLS_IE64
4234 ENUMX
4235   BFD_RELOC_390_TLS_IEENT
4236 ENUMX
4237   BFD_RELOC_390_TLS_LE32
4238 ENUMX
4239   BFD_RELOC_390_TLS_LE64
4240 ENUMX
4241   BFD_RELOC_390_TLS_LDO32
4242 ENUMX
4243   BFD_RELOC_390_TLS_LDO64
4244 ENUMX
4245   BFD_RELOC_390_TLS_DTPMOD
4246 ENUMX
4247   BFD_RELOC_390_TLS_DTPOFF
4248 ENUMX
4249   BFD_RELOC_390_TLS_TPOFF
4250 ENUMDOC
4251   s390 tls relocations.
4252
4253 ENUM
4254   BFD_RELOC_390_20
4255 ENUMX
4256   BFD_RELOC_390_GOT20
4257 ENUMX
4258   BFD_RELOC_390_GOTPLT20
4259 ENUMX
4260   BFD_RELOC_390_TLS_GOTIE20
4261 ENUMDOC
4262   Long displacement extension.
4263
4264 ENUM
4265   BFD_RELOC_SCORE_GPREL15
4266 ENUMDOC
4267   Score relocations
4268   Low 16 bit for load/store
4269 ENUM
4270   BFD_RELOC_SCORE_DUMMY2
4271 ENUMX
4272   BFD_RELOC_SCORE_JMP
4273 ENUMDOC
4274   This is a 24-bit reloc with the right 1 bit assumed to be 0
4275 ENUM
4276   BFD_RELOC_SCORE_BRANCH
4277 ENUMDOC
4278   This is a 19-bit reloc with the right 1 bit assumed to be 0
4279 ENUM
4280   BFD_RELOC_SCORE_IMM30
4281 ENUMDOC
4282   This is a 32-bit reloc for 48-bit instructions.
4283 ENUM
4284   BFD_RELOC_SCORE_IMM32
4285 ENUMDOC
4286   This is a 32-bit reloc for 48-bit instructions.
4287 ENUM
4288   BFD_RELOC_SCORE16_JMP
4289 ENUMDOC
4290   This is a 11-bit reloc with the right 1 bit assumed to be 0
4291 ENUM
4292   BFD_RELOC_SCORE16_BRANCH
4293 ENUMDOC
4294   This is a 8-bit reloc with the right 1 bit assumed to be 0
4295 ENUM
4296   BFD_RELOC_SCORE_BCMP
4297 ENUMDOC
4298    This is a 9-bit reloc with the right 1 bit assumed to be 0
4299 ENUM
4300   BFD_RELOC_SCORE_GOT15
4301 ENUMX
4302   BFD_RELOC_SCORE_GOT_LO16
4303 ENUMX
4304   BFD_RELOC_SCORE_CALL15
4305 ENUMX
4306   BFD_RELOC_SCORE_DUMMY_HI16
4307 ENUMDOC
4308   Undocumented Score relocs
4309
4310 ENUM
4311   BFD_RELOC_IP2K_FR9
4312 ENUMDOC
4313   Scenix IP2K - 9-bit register number / data address
4314 ENUM
4315   BFD_RELOC_IP2K_BANK
4316 ENUMDOC
4317   Scenix IP2K - 4-bit register/data bank number
4318 ENUM
4319   BFD_RELOC_IP2K_ADDR16CJP
4320 ENUMDOC
4321   Scenix IP2K - low 13 bits of instruction word address
4322 ENUM
4323   BFD_RELOC_IP2K_PAGE3
4324 ENUMDOC
4325   Scenix IP2K - high 3 bits of instruction word address
4326 ENUM
4327   BFD_RELOC_IP2K_LO8DATA
4328 ENUMX
4329   BFD_RELOC_IP2K_HI8DATA
4330 ENUMX
4331   BFD_RELOC_IP2K_EX8DATA
4332 ENUMDOC
4333   Scenix IP2K - ext/low/high 8 bits of data address
4334 ENUM
4335   BFD_RELOC_IP2K_LO8INSN
4336 ENUMX
4337   BFD_RELOC_IP2K_HI8INSN
4338 ENUMDOC
4339   Scenix IP2K - low/high 8 bits of instruction word address
4340 ENUM
4341   BFD_RELOC_IP2K_PC_SKIP
4342 ENUMDOC
4343   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4344 ENUM
4345   BFD_RELOC_IP2K_TEXT
4346 ENUMDOC
4347   Scenix IP2K - 16 bit word address in text section.
4348 ENUM
4349   BFD_RELOC_IP2K_FR_OFFSET
4350 ENUMDOC
4351   Scenix IP2K - 7-bit sp or dp offset
4352 ENUM
4353   BFD_RELOC_VPE4KMATH_DATA
4354 ENUMX
4355   BFD_RELOC_VPE4KMATH_INSN
4356 ENUMDOC
4357   Scenix VPE4K coprocessor - data/insn-space addressing
4358
4359 ENUM
4360   BFD_RELOC_VTABLE_INHERIT
4361 ENUMX
4362   BFD_RELOC_VTABLE_ENTRY
4363 ENUMDOC
4364   These two relocations are used by the linker to determine which of
4365   the entries in a C++ virtual function table are actually used.  When
4366   the --gc-sections option is given, the linker will zero out the entries
4367   that are not used, so that the code for those functions need not be
4368   included in the output.
4369
4370   VTABLE_INHERIT is a zero-space relocation used to describe to the
4371   linker the inheritance tree of a C++ virtual function table.  The
4372   relocation's symbol should be the parent class' vtable, and the
4373   relocation should be located at the child vtable.
4374
4375   VTABLE_ENTRY is a zero-space relocation that describes the use of a
4376   virtual function table entry.  The reloc's symbol should refer to the
4377   table of the class mentioned in the code.  Off of that base, an offset
4378   describes the entry that is being used.  For Rela hosts, this offset
4379   is stored in the reloc's addend.  For Rel hosts, we are forced to put
4380   this offset in the reloc's section offset.
4381
4382 ENUM
4383   BFD_RELOC_IA64_IMM14
4384 ENUMX
4385   BFD_RELOC_IA64_IMM22
4386 ENUMX
4387   BFD_RELOC_IA64_IMM64
4388 ENUMX
4389   BFD_RELOC_IA64_DIR32MSB
4390 ENUMX
4391   BFD_RELOC_IA64_DIR32LSB
4392 ENUMX
4393   BFD_RELOC_IA64_DIR64MSB
4394 ENUMX
4395   BFD_RELOC_IA64_DIR64LSB
4396 ENUMX
4397   BFD_RELOC_IA64_GPREL22
4398 ENUMX
4399   BFD_RELOC_IA64_GPREL64I
4400 ENUMX
4401   BFD_RELOC_IA64_GPREL32MSB
4402 ENUMX
4403   BFD_RELOC_IA64_GPREL32LSB
4404 ENUMX
4405   BFD_RELOC_IA64_GPREL64MSB
4406 ENUMX
4407   BFD_RELOC_IA64_GPREL64LSB
4408 ENUMX
4409   BFD_RELOC_IA64_LTOFF22
4410 ENUMX
4411   BFD_RELOC_IA64_LTOFF64I
4412 ENUMX
4413   BFD_RELOC_IA64_PLTOFF22
4414 ENUMX
4415   BFD_RELOC_IA64_PLTOFF64I
4416 ENUMX
4417   BFD_RELOC_IA64_PLTOFF64MSB
4418 ENUMX
4419   BFD_RELOC_IA64_PLTOFF64LSB
4420 ENUMX
4421   BFD_RELOC_IA64_FPTR64I
4422 ENUMX
4423   BFD_RELOC_IA64_FPTR32MSB
4424 ENUMX
4425   BFD_RELOC_IA64_FPTR32LSB
4426 ENUMX
4427   BFD_RELOC_IA64_FPTR64MSB
4428 ENUMX
4429   BFD_RELOC_IA64_FPTR64LSB
4430 ENUMX
4431   BFD_RELOC_IA64_PCREL21B
4432 ENUMX
4433   BFD_RELOC_IA64_PCREL21BI
4434 ENUMX
4435   BFD_RELOC_IA64_PCREL21M
4436 ENUMX
4437   BFD_RELOC_IA64_PCREL21F
4438 ENUMX
4439   BFD_RELOC_IA64_PCREL22
4440 ENUMX
4441   BFD_RELOC_IA64_PCREL60B
4442 ENUMX
4443   BFD_RELOC_IA64_PCREL64I
4444 ENUMX
4445   BFD_RELOC_IA64_PCREL32MSB
4446 ENUMX
4447   BFD_RELOC_IA64_PCREL32LSB
4448 ENUMX
4449   BFD_RELOC_IA64_PCREL64MSB
4450 ENUMX
4451   BFD_RELOC_IA64_PCREL64LSB
4452 ENUMX
4453   BFD_RELOC_IA64_LTOFF_FPTR22
4454 ENUMX
4455   BFD_RELOC_IA64_LTOFF_FPTR64I
4456 ENUMX
4457   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4458 ENUMX
4459   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4460 ENUMX
4461   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4462 ENUMX
4463   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4464 ENUMX
4465   BFD_RELOC_IA64_SEGREL32MSB
4466 ENUMX
4467   BFD_RELOC_IA64_SEGREL32LSB
4468 ENUMX
4469   BFD_RELOC_IA64_SEGREL64MSB
4470 ENUMX
4471   BFD_RELOC_IA64_SEGREL64LSB
4472 ENUMX
4473   BFD_RELOC_IA64_SECREL32MSB
4474 ENUMX
4475   BFD_RELOC_IA64_SECREL32LSB
4476 ENUMX
4477   BFD_RELOC_IA64_SECREL64MSB
4478 ENUMX
4479   BFD_RELOC_IA64_SECREL64LSB
4480 ENUMX
4481   BFD_RELOC_IA64_REL32MSB
4482 ENUMX
4483   BFD_RELOC_IA64_REL32LSB
4484 ENUMX
4485   BFD_RELOC_IA64_REL64MSB
4486 ENUMX
4487   BFD_RELOC_IA64_REL64LSB
4488 ENUMX
4489   BFD_RELOC_IA64_LTV32MSB
4490 ENUMX
4491   BFD_RELOC_IA64_LTV32LSB
4492 ENUMX
4493   BFD_RELOC_IA64_LTV64MSB
4494 ENUMX
4495   BFD_RELOC_IA64_LTV64LSB
4496 ENUMX
4497   BFD_RELOC_IA64_IPLTMSB
4498 ENUMX
4499   BFD_RELOC_IA64_IPLTLSB
4500 ENUMX
4501   BFD_RELOC_IA64_COPY
4502 ENUMX
4503   BFD_RELOC_IA64_LTOFF22X
4504 ENUMX
4505   BFD_RELOC_IA64_LDXMOV
4506 ENUMX
4507   BFD_RELOC_IA64_TPREL14
4508 ENUMX
4509   BFD_RELOC_IA64_TPREL22
4510 ENUMX
4511   BFD_RELOC_IA64_TPREL64I
4512 ENUMX
4513   BFD_RELOC_IA64_TPREL64MSB
4514 ENUMX
4515   BFD_RELOC_IA64_TPREL64LSB
4516 ENUMX
4517   BFD_RELOC_IA64_LTOFF_TPREL22
4518 ENUMX
4519   BFD_RELOC_IA64_DTPMOD64MSB
4520 ENUMX
4521   BFD_RELOC_IA64_DTPMOD64LSB
4522 ENUMX
4523   BFD_RELOC_IA64_LTOFF_DTPMOD22
4524 ENUMX
4525   BFD_RELOC_IA64_DTPREL14
4526 ENUMX
4527   BFD_RELOC_IA64_DTPREL22
4528 ENUMX
4529   BFD_RELOC_IA64_DTPREL64I
4530 ENUMX
4531   BFD_RELOC_IA64_DTPREL32MSB
4532 ENUMX
4533   BFD_RELOC_IA64_DTPREL32LSB
4534 ENUMX
4535   BFD_RELOC_IA64_DTPREL64MSB
4536 ENUMX
4537   BFD_RELOC_IA64_DTPREL64LSB
4538 ENUMX
4539   BFD_RELOC_IA64_LTOFF_DTPREL22
4540 ENUMDOC
4541   Intel IA64 Relocations.
4542
4543 ENUM
4544   BFD_RELOC_M68HC11_HI8
4545 ENUMDOC
4546   Motorola 68HC11 reloc.
4547   This is the 8 bit high part of an absolute address.
4548 ENUM
4549   BFD_RELOC_M68HC11_LO8
4550 ENUMDOC
4551   Motorola 68HC11 reloc.
4552   This is the 8 bit low part of an absolute address.
4553 ENUM
4554   BFD_RELOC_M68HC11_3B
4555 ENUMDOC
4556   Motorola 68HC11 reloc.
4557   This is the 3 bit of a value.
4558 ENUM
4559   BFD_RELOC_M68HC11_RL_JUMP
4560 ENUMDOC
4561   Motorola 68HC11 reloc.
4562   This reloc marks the beginning of a jump/call instruction.
4563   It is used for linker relaxation to correctly identify beginning
4564   of instruction and change some branches to use PC-relative
4565   addressing mode.
4566 ENUM
4567   BFD_RELOC_M68HC11_RL_GROUP
4568 ENUMDOC
4569   Motorola 68HC11 reloc.
4570   This reloc marks a group of several instructions that gcc generates
4571   and for which the linker relaxation pass can modify and/or remove
4572   some of them.
4573 ENUM
4574   BFD_RELOC_M68HC11_LO16
4575 ENUMDOC
4576   Motorola 68HC11 reloc.
4577   This is the 16-bit lower part of an address.  It is used for 'call'
4578   instruction to specify the symbol address without any special
4579   transformation (due to memory bank window).
4580 ENUM
4581   BFD_RELOC_M68HC11_PAGE
4582 ENUMDOC
4583   Motorola 68HC11 reloc.
4584   This is a 8-bit reloc that specifies the page number of an address.
4585   It is used by 'call' instruction to specify the page number of
4586   the symbol.
4587 ENUM
4588   BFD_RELOC_M68HC11_24
4589 ENUMDOC
4590   Motorola 68HC11 reloc.
4591   This is a 24-bit reloc that represents the address with a 16-bit
4592   value and a 8-bit page number.  The symbol address is transformed
4593   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4594 ENUM
4595   BFD_RELOC_M68HC12_5B
4596 ENUMDOC
4597   Motorola 68HC12 reloc.
4598   This is the 5 bits of a value.
4599
4600 ENUM
4601   BFD_RELOC_16C_NUM08
4602 ENUMX
4603   BFD_RELOC_16C_NUM08_C
4604 ENUMX
4605   BFD_RELOC_16C_NUM16
4606 ENUMX
4607   BFD_RELOC_16C_NUM16_C
4608 ENUMX
4609   BFD_RELOC_16C_NUM32
4610 ENUMX
4611   BFD_RELOC_16C_NUM32_C
4612 ENUMX
4613   BFD_RELOC_16C_DISP04
4614 ENUMX
4615   BFD_RELOC_16C_DISP04_C
4616 ENUMX
4617   BFD_RELOC_16C_DISP08
4618 ENUMX
4619   BFD_RELOC_16C_DISP08_C
4620 ENUMX
4621   BFD_RELOC_16C_DISP16
4622 ENUMX
4623   BFD_RELOC_16C_DISP16_C
4624 ENUMX
4625   BFD_RELOC_16C_DISP24
4626 ENUMX
4627   BFD_RELOC_16C_DISP24_C
4628 ENUMX
4629   BFD_RELOC_16C_DISP24a
4630 ENUMX
4631   BFD_RELOC_16C_DISP24a_C
4632 ENUMX
4633   BFD_RELOC_16C_REG04
4634 ENUMX
4635   BFD_RELOC_16C_REG04_C
4636 ENUMX
4637   BFD_RELOC_16C_REG04a
4638 ENUMX
4639   BFD_RELOC_16C_REG04a_C
4640 ENUMX
4641   BFD_RELOC_16C_REG14
4642 ENUMX
4643   BFD_RELOC_16C_REG14_C
4644 ENUMX
4645   BFD_RELOC_16C_REG16
4646 ENUMX
4647   BFD_RELOC_16C_REG16_C
4648 ENUMX
4649   BFD_RELOC_16C_REG20
4650 ENUMX
4651   BFD_RELOC_16C_REG20_C
4652 ENUMX
4653   BFD_RELOC_16C_ABS20
4654 ENUMX
4655   BFD_RELOC_16C_ABS20_C
4656 ENUMX
4657   BFD_RELOC_16C_ABS24
4658 ENUMX
4659   BFD_RELOC_16C_ABS24_C
4660 ENUMX
4661   BFD_RELOC_16C_IMM04
4662 ENUMX
4663   BFD_RELOC_16C_IMM04_C
4664 ENUMX
4665   BFD_RELOC_16C_IMM16
4666 ENUMX
4667   BFD_RELOC_16C_IMM16_C
4668 ENUMX
4669   BFD_RELOC_16C_IMM20
4670 ENUMX
4671   BFD_RELOC_16C_IMM20_C
4672 ENUMX
4673   BFD_RELOC_16C_IMM24
4674 ENUMX
4675   BFD_RELOC_16C_IMM24_C
4676 ENUMX
4677   BFD_RELOC_16C_IMM32
4678 ENUMX
4679   BFD_RELOC_16C_IMM32_C
4680 ENUMDOC
4681   NS CR16C Relocations.
4682
4683 ENUM
4684   BFD_RELOC_CR16_NUM8
4685 ENUMX
4686   BFD_RELOC_CR16_NUM16
4687 ENUMX
4688   BFD_RELOC_CR16_NUM32
4689 ENUMX
4690   BFD_RELOC_CR16_NUM32a
4691 ENUMX
4692   BFD_RELOC_CR16_REGREL0
4693 ENUMX
4694   BFD_RELOC_CR16_REGREL4
4695 ENUMX
4696   BFD_RELOC_CR16_REGREL4a
4697 ENUMX
4698   BFD_RELOC_CR16_REGREL14
4699 ENUMX
4700   BFD_RELOC_CR16_REGREL14a
4701 ENUMX
4702   BFD_RELOC_CR16_REGREL16
4703 ENUMX
4704   BFD_RELOC_CR16_REGREL20
4705 ENUMX
4706   BFD_RELOC_CR16_REGREL20a
4707 ENUMX
4708   BFD_RELOC_CR16_ABS20
4709 ENUMX
4710   BFD_RELOC_CR16_ABS24
4711 ENUMX
4712   BFD_RELOC_CR16_IMM4
4713 ENUMX
4714   BFD_RELOC_CR16_IMM8
4715 ENUMX
4716   BFD_RELOC_CR16_IMM16
4717 ENUMX
4718   BFD_RELOC_CR16_IMM20
4719 ENUMX
4720   BFD_RELOC_CR16_IMM24
4721 ENUMX
4722   BFD_RELOC_CR16_IMM32
4723 ENUMX
4724   BFD_RELOC_CR16_IMM32a
4725 ENUMX
4726   BFD_RELOC_CR16_DISP4
4727 ENUMX
4728   BFD_RELOC_CR16_DISP8
4729 ENUMX
4730   BFD_RELOC_CR16_DISP16
4731 ENUMX
4732   BFD_RELOC_CR16_DISP20
4733 ENUMX
4734   BFD_RELOC_CR16_DISP24
4735 ENUMX
4736   BFD_RELOC_CR16_DISP24a
4737 ENUMX
4738   BFD_RELOC_CR16_SWITCH8
4739 ENUMX
4740   BFD_RELOC_CR16_SWITCH16
4741 ENUMX
4742   BFD_RELOC_CR16_SWITCH32
4743 ENUMX
4744   BFD_RELOC_CR16_GOT_REGREL20
4745 ENUMX
4746   BFD_RELOC_CR16_GOTC_REGREL20
4747 ENUMX
4748   BFD_RELOC_CR16_GLOB_DAT
4749 ENUMDOC
4750   NS CR16 Relocations.
4751
4752 ENUM
4753   BFD_RELOC_CRX_REL4
4754 ENUMX
4755   BFD_RELOC_CRX_REL8
4756 ENUMX
4757   BFD_RELOC_CRX_REL8_CMP
4758 ENUMX
4759   BFD_RELOC_CRX_REL16
4760 ENUMX
4761   BFD_RELOC_CRX_REL24
4762 ENUMX
4763   BFD_RELOC_CRX_REL32
4764 ENUMX
4765   BFD_RELOC_CRX_REGREL12
4766 ENUMX
4767   BFD_RELOC_CRX_REGREL22
4768 ENUMX
4769   BFD_RELOC_CRX_REGREL28
4770 ENUMX
4771   BFD_RELOC_CRX_REGREL32
4772 ENUMX
4773   BFD_RELOC_CRX_ABS16
4774 ENUMX
4775   BFD_RELOC_CRX_ABS32
4776 ENUMX
4777   BFD_RELOC_CRX_NUM8
4778 ENUMX
4779   BFD_RELOC_CRX_NUM16
4780 ENUMX
4781   BFD_RELOC_CRX_NUM32
4782 ENUMX
4783   BFD_RELOC_CRX_IMM16
4784 ENUMX
4785   BFD_RELOC_CRX_IMM32
4786 ENUMX
4787   BFD_RELOC_CRX_SWITCH8
4788 ENUMX
4789   BFD_RELOC_CRX_SWITCH16
4790 ENUMX
4791   BFD_RELOC_CRX_SWITCH32
4792 ENUMDOC
4793   NS CRX Relocations.
4794
4795 ENUM
4796   BFD_RELOC_CRIS_BDISP8
4797 ENUMX
4798   BFD_RELOC_CRIS_UNSIGNED_5
4799 ENUMX
4800   BFD_RELOC_CRIS_SIGNED_6
4801 ENUMX
4802   BFD_RELOC_CRIS_UNSIGNED_6
4803 ENUMX
4804   BFD_RELOC_CRIS_SIGNED_8
4805 ENUMX
4806   BFD_RELOC_CRIS_UNSIGNED_8
4807 ENUMX
4808   BFD_RELOC_CRIS_SIGNED_16
4809 ENUMX
4810   BFD_RELOC_CRIS_UNSIGNED_16
4811 ENUMX
4812   BFD_RELOC_CRIS_LAPCQ_OFFSET
4813 ENUMX
4814   BFD_RELOC_CRIS_UNSIGNED_4
4815 ENUMDOC
4816   These relocs are only used within the CRIS assembler.  They are not
4817   (at present) written to any object files.
4818 ENUM
4819   BFD_RELOC_CRIS_COPY
4820 ENUMX
4821   BFD_RELOC_CRIS_GLOB_DAT
4822 ENUMX
4823   BFD_RELOC_CRIS_JUMP_SLOT
4824 ENUMX
4825   BFD_RELOC_CRIS_RELATIVE
4826 ENUMDOC
4827   Relocs used in ELF shared libraries for CRIS.
4828 ENUM
4829   BFD_RELOC_CRIS_32_GOT
4830 ENUMDOC
4831   32-bit offset to symbol-entry within GOT.
4832 ENUM
4833   BFD_RELOC_CRIS_16_GOT
4834 ENUMDOC
4835   16-bit offset to symbol-entry within GOT.
4836 ENUM
4837   BFD_RELOC_CRIS_32_GOTPLT
4838 ENUMDOC
4839   32-bit offset to symbol-entry within GOT, with PLT handling.
4840 ENUM
4841   BFD_RELOC_CRIS_16_GOTPLT
4842 ENUMDOC
4843   16-bit offset to symbol-entry within GOT, with PLT handling.
4844 ENUM
4845   BFD_RELOC_CRIS_32_GOTREL
4846 ENUMDOC
4847   32-bit offset to symbol, relative to GOT.
4848 ENUM
4849   BFD_RELOC_CRIS_32_PLT_GOTREL
4850 ENUMDOC
4851   32-bit offset to symbol with PLT entry, relative to GOT.
4852 ENUM
4853   BFD_RELOC_CRIS_32_PLT_PCREL
4854 ENUMDOC
4855   32-bit offset to symbol with PLT entry, relative to this relocation.
4856
4857 ENUM
4858   BFD_RELOC_CRIS_32_GOT_GD
4859 ENUMX
4860   BFD_RELOC_CRIS_16_GOT_GD
4861 ENUMX
4862   BFD_RELOC_CRIS_32_GD
4863 ENUMX
4864   BFD_RELOC_CRIS_DTP
4865 ENUMX
4866   BFD_RELOC_CRIS_32_DTPREL
4867 ENUMX
4868   BFD_RELOC_CRIS_16_DTPREL
4869 ENUMX
4870   BFD_RELOC_CRIS_32_GOT_TPREL
4871 ENUMX
4872   BFD_RELOC_CRIS_16_GOT_TPREL
4873 ENUMX
4874   BFD_RELOC_CRIS_32_TPREL
4875 ENUMX
4876   BFD_RELOC_CRIS_16_TPREL
4877 ENUMX
4878   BFD_RELOC_CRIS_DTPMOD
4879 ENUMX
4880   BFD_RELOC_CRIS_32_IE
4881 ENUMDOC
4882   Relocs used in TLS code for CRIS.
4883
4884 ENUM
4885   BFD_RELOC_860_COPY
4886 ENUMX
4887   BFD_RELOC_860_GLOB_DAT
4888 ENUMX
4889   BFD_RELOC_860_JUMP_SLOT
4890 ENUMX
4891   BFD_RELOC_860_RELATIVE
4892 ENUMX
4893   BFD_RELOC_860_PC26
4894 ENUMX
4895   BFD_RELOC_860_PLT26
4896 ENUMX
4897   BFD_RELOC_860_PC16
4898 ENUMX
4899   BFD_RELOC_860_LOW0
4900 ENUMX
4901   BFD_RELOC_860_SPLIT0
4902 ENUMX
4903   BFD_RELOC_860_LOW1
4904 ENUMX
4905   BFD_RELOC_860_SPLIT1
4906 ENUMX
4907   BFD_RELOC_860_LOW2
4908 ENUMX
4909   BFD_RELOC_860_SPLIT2
4910 ENUMX
4911   BFD_RELOC_860_LOW3
4912 ENUMX
4913   BFD_RELOC_860_LOGOT0
4914 ENUMX
4915   BFD_RELOC_860_SPGOT0
4916 ENUMX
4917   BFD_RELOC_860_LOGOT1
4918 ENUMX
4919   BFD_RELOC_860_SPGOT1
4920 ENUMX
4921   BFD_RELOC_860_LOGOTOFF0
4922 ENUMX
4923   BFD_RELOC_860_SPGOTOFF0
4924 ENUMX
4925   BFD_RELOC_860_LOGOTOFF1
4926 ENUMX
4927   BFD_RELOC_860_SPGOTOFF1
4928 ENUMX
4929   BFD_RELOC_860_LOGOTOFF2
4930 ENUMX
4931   BFD_RELOC_860_LOGOTOFF3
4932 ENUMX
4933   BFD_RELOC_860_LOPC
4934 ENUMX
4935   BFD_RELOC_860_HIGHADJ
4936 ENUMX
4937   BFD_RELOC_860_HAGOT
4938 ENUMX
4939   BFD_RELOC_860_HAGOTOFF
4940 ENUMX
4941   BFD_RELOC_860_HAPC
4942 ENUMX
4943   BFD_RELOC_860_HIGH
4944 ENUMX
4945   BFD_RELOC_860_HIGOT
4946 ENUMX
4947   BFD_RELOC_860_HIGOTOFF
4948 ENUMDOC
4949   Intel i860 Relocations.
4950
4951 ENUM
4952   BFD_RELOC_OPENRISC_ABS_26
4953 ENUMX
4954   BFD_RELOC_OPENRISC_REL_26
4955 ENUMDOC
4956   OpenRISC Relocations.
4957
4958 ENUM
4959   BFD_RELOC_H8_DIR16A8
4960 ENUMX
4961   BFD_RELOC_H8_DIR16R8
4962 ENUMX
4963   BFD_RELOC_H8_DIR24A8
4964 ENUMX
4965   BFD_RELOC_H8_DIR24R8
4966 ENUMX
4967   BFD_RELOC_H8_DIR32A16
4968 ENUMDOC
4969   H8 elf Relocations.
4970
4971 ENUM
4972   BFD_RELOC_XSTORMY16_REL_12
4973 ENUMX
4974   BFD_RELOC_XSTORMY16_12
4975 ENUMX
4976   BFD_RELOC_XSTORMY16_24
4977 ENUMX
4978   BFD_RELOC_XSTORMY16_FPTR16
4979 ENUMDOC
4980   Sony Xstormy16 Relocations.
4981
4982 ENUM
4983   BFD_RELOC_RELC
4984 ENUMDOC
4985   Self-describing complex relocations.
4986 COMMENT
4987
4988 ENUM
4989   BFD_RELOC_XC16X_PAG
4990 ENUMX
4991   BFD_RELOC_XC16X_POF
4992 ENUMX
4993   BFD_RELOC_XC16X_SEG
4994 ENUMX
4995   BFD_RELOC_XC16X_SOF
4996 ENUMDOC
4997   Infineon Relocations.
4998
4999 ENUM
5000   BFD_RELOC_VAX_GLOB_DAT
5001 ENUMX
5002   BFD_RELOC_VAX_JMP_SLOT
5003 ENUMX
5004   BFD_RELOC_VAX_RELATIVE
5005 ENUMDOC
5006   Relocations used by VAX ELF.
5007
5008 ENUM
5009   BFD_RELOC_MT_PC16
5010 ENUMDOC
5011   Morpho MT - 16 bit immediate relocation.
5012 ENUM
5013   BFD_RELOC_MT_HI16
5014 ENUMDOC
5015   Morpho MT - Hi 16 bits of an address.
5016 ENUM
5017   BFD_RELOC_MT_LO16
5018 ENUMDOC
5019   Morpho MT - Low 16 bits of an address.
5020 ENUM
5021   BFD_RELOC_MT_GNU_VTINHERIT
5022 ENUMDOC
5023   Morpho MT - Used to tell the linker which vtable entries are used.
5024 ENUM
5025   BFD_RELOC_MT_GNU_VTENTRY
5026 ENUMDOC
5027   Morpho MT - Used to tell the linker which vtable entries are used.
5028 ENUM
5029   BFD_RELOC_MT_PCINSN8
5030 ENUMDOC
5031   Morpho MT - 8 bit immediate relocation.
5032
5033 ENUM
5034   BFD_RELOC_MSP430_10_PCREL
5035 ENUMX
5036   BFD_RELOC_MSP430_16_PCREL
5037 ENUMX
5038   BFD_RELOC_MSP430_16
5039 ENUMX
5040   BFD_RELOC_MSP430_16_PCREL_BYTE
5041 ENUMX
5042   BFD_RELOC_MSP430_16_BYTE
5043 ENUMX
5044   BFD_RELOC_MSP430_2X_PCREL
5045 ENUMX
5046   BFD_RELOC_MSP430_RL_PCREL
5047 ENUMDOC
5048   msp430 specific relocation codes
5049
5050 ENUM
5051   BFD_RELOC_IQ2000_OFFSET_16
5052 ENUMX
5053   BFD_RELOC_IQ2000_OFFSET_21
5054 ENUMX
5055   BFD_RELOC_IQ2000_UHI16
5056 ENUMDOC
5057   IQ2000 Relocations.
5058
5059 ENUM
5060   BFD_RELOC_XTENSA_RTLD
5061 ENUMDOC
5062   Special Xtensa relocation used only by PLT entries in ELF shared
5063   objects to indicate that the runtime linker should set the value
5064   to one of its own internal functions or data structures.
5065 ENUM
5066   BFD_RELOC_XTENSA_GLOB_DAT
5067 ENUMX
5068   BFD_RELOC_XTENSA_JMP_SLOT
5069 ENUMX
5070   BFD_RELOC_XTENSA_RELATIVE
5071 ENUMDOC
5072   Xtensa relocations for ELF shared objects.
5073 ENUM
5074   BFD_RELOC_XTENSA_PLT
5075 ENUMDOC
5076   Xtensa relocation used in ELF object files for symbols that may require
5077   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
5078 ENUM
5079   BFD_RELOC_XTENSA_DIFF8
5080 ENUMX
5081   BFD_RELOC_XTENSA_DIFF16
5082 ENUMX
5083   BFD_RELOC_XTENSA_DIFF32
5084 ENUMDOC
5085   Xtensa relocations to mark the difference of two local symbols.
5086   These are only needed to support linker relaxation and can be ignored
5087   when not relaxing.  The field is set to the value of the difference
5088   assuming no relaxation.  The relocation encodes the position of the
5089   first symbol so the linker can determine whether to adjust the field
5090   value.
5091 ENUM
5092   BFD_RELOC_XTENSA_SLOT0_OP
5093 ENUMX
5094   BFD_RELOC_XTENSA_SLOT1_OP
5095 ENUMX
5096   BFD_RELOC_XTENSA_SLOT2_OP
5097 ENUMX
5098   BFD_RELOC_XTENSA_SLOT3_OP
5099 ENUMX
5100   BFD_RELOC_XTENSA_SLOT4_OP
5101 ENUMX
5102   BFD_RELOC_XTENSA_SLOT5_OP
5103 ENUMX
5104   BFD_RELOC_XTENSA_SLOT6_OP
5105 ENUMX
5106   BFD_RELOC_XTENSA_SLOT7_OP
5107 ENUMX
5108   BFD_RELOC_XTENSA_SLOT8_OP
5109 ENUMX
5110   BFD_RELOC_XTENSA_SLOT9_OP
5111 ENUMX
5112   BFD_RELOC_XTENSA_SLOT10_OP
5113 ENUMX
5114   BFD_RELOC_XTENSA_SLOT11_OP
5115 ENUMX
5116   BFD_RELOC_XTENSA_SLOT12_OP
5117 ENUMX
5118   BFD_RELOC_XTENSA_SLOT13_OP
5119 ENUMX
5120   BFD_RELOC_XTENSA_SLOT14_OP
5121 ENUMDOC
5122   Generic Xtensa relocations for instruction operands.  Only the slot
5123   number is encoded in the relocation.  The relocation applies to the
5124   last PC-relative immediate operand, or if there are no PC-relative
5125   immediates, to the last immediate operand.
5126 ENUM
5127   BFD_RELOC_XTENSA_SLOT0_ALT
5128 ENUMX
5129   BFD_RELOC_XTENSA_SLOT1_ALT
5130 ENUMX
5131   BFD_RELOC_XTENSA_SLOT2_ALT
5132 ENUMX
5133   BFD_RELOC_XTENSA_SLOT3_ALT
5134 ENUMX
5135   BFD_RELOC_XTENSA_SLOT4_ALT
5136 ENUMX
5137   BFD_RELOC_XTENSA_SLOT5_ALT
5138 ENUMX
5139   BFD_RELOC_XTENSA_SLOT6_ALT
5140 ENUMX
5141   BFD_RELOC_XTENSA_SLOT7_ALT
5142 ENUMX
5143   BFD_RELOC_XTENSA_SLOT8_ALT
5144 ENUMX
5145   BFD_RELOC_XTENSA_SLOT9_ALT
5146 ENUMX
5147   BFD_RELOC_XTENSA_SLOT10_ALT
5148 ENUMX
5149   BFD_RELOC_XTENSA_SLOT11_ALT
5150 ENUMX
5151   BFD_RELOC_XTENSA_SLOT12_ALT
5152 ENUMX
5153   BFD_RELOC_XTENSA_SLOT13_ALT
5154 ENUMX
5155   BFD_RELOC_XTENSA_SLOT14_ALT
5156 ENUMDOC
5157   Alternate Xtensa relocations.  Only the slot is encoded in the
5158   relocation.  The meaning of these relocations is opcode-specific.
5159 ENUM
5160   BFD_RELOC_XTENSA_OP0
5161 ENUMX
5162   BFD_RELOC_XTENSA_OP1
5163 ENUMX
5164   BFD_RELOC_XTENSA_OP2
5165 ENUMDOC
5166   Xtensa relocations for backward compatibility.  These have all been
5167   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
5168 ENUM
5169   BFD_RELOC_XTENSA_ASM_EXPAND
5170 ENUMDOC
5171   Xtensa relocation to mark that the assembler expanded the
5172   instructions from an original target.  The expansion size is
5173   encoded in the reloc size.
5174 ENUM
5175   BFD_RELOC_XTENSA_ASM_SIMPLIFY
5176 ENUMDOC
5177   Xtensa relocation to mark that the linker should simplify
5178   assembler-expanded instructions.  This is commonly used
5179   internally by the linker after analysis of a
5180   BFD_RELOC_XTENSA_ASM_EXPAND.
5181 ENUM
5182   BFD_RELOC_XTENSA_TLSDESC_FN
5183 ENUMX
5184   BFD_RELOC_XTENSA_TLSDESC_ARG
5185 ENUMX
5186   BFD_RELOC_XTENSA_TLS_DTPOFF
5187 ENUMX
5188   BFD_RELOC_XTENSA_TLS_TPOFF
5189 ENUMX
5190   BFD_RELOC_XTENSA_TLS_FUNC
5191 ENUMX
5192   BFD_RELOC_XTENSA_TLS_ARG
5193 ENUMX
5194   BFD_RELOC_XTENSA_TLS_CALL
5195 ENUMDOC
5196   Xtensa TLS relocations.
5197
5198 ENUM
5199   BFD_RELOC_Z80_DISP8
5200 ENUMDOC
5201   8 bit signed offset in (ix+d) or (iy+d).
5202
5203 ENUM
5204   BFD_RELOC_Z8K_DISP7
5205 ENUMDOC
5206   DJNZ offset.
5207 ENUM
5208   BFD_RELOC_Z8K_CALLR
5209 ENUMDOC
5210   CALR offset.
5211 ENUM
5212   BFD_RELOC_Z8K_IMM4L
5213 ENUMDOC
5214   4 bit value.
5215
5216 ENUM
5217    BFD_RELOC_LM32_CALL
5218 ENUMX
5219    BFD_RELOC_LM32_BRANCH
5220 ENUMX
5221    BFD_RELOC_LM32_16_GOT
5222 ENUMX
5223    BFD_RELOC_LM32_GOTOFF_HI16
5224 ENUMX
5225    BFD_RELOC_LM32_GOTOFF_LO16
5226 ENUMX
5227    BFD_RELOC_LM32_COPY
5228 ENUMX
5229    BFD_RELOC_LM32_GLOB_DAT
5230 ENUMX
5231    BFD_RELOC_LM32_JMP_SLOT
5232 ENUMX
5233    BFD_RELOC_LM32_RELATIVE
5234 ENUMDOC
5235  Lattice Mico32 relocations.
5236
5237 ENUM
5238    BFD_RELOC_MACH_O_SECTDIFF
5239 ENUMDOC
5240    Difference between two section addreses.  Must be followed by a
5241    BFD_RELOC_MACH_O_PAIR.
5242 ENUM
5243    BFD_RELOC_MACH_O_PAIR
5244 ENUMDOC
5245  Mach-O generic relocations.
5246
5247 ENUM
5248   BFD_RELOC_MICROBLAZE_32_LO
5249 ENUMDOC
5250   This is a 32 bit reloc for the microblaze that stores the
5251   low 16 bits of a value
5252 ENUM
5253   BFD_RELOC_MICROBLAZE_32_LO_PCREL
5254 ENUMDOC
5255   This is a 32 bit pc-relative reloc for the microblaze that
5256   stores the low 16 bits of a value
5257 ENUM
5258   BFD_RELOC_MICROBLAZE_32_ROSDA
5259 ENUMDOC
5260   This is a 32 bit reloc for the microblaze that stores a
5261   value relative to the read-only small data area anchor
5262 ENUM
5263   BFD_RELOC_MICROBLAZE_32_RWSDA
5264 ENUMDOC
5265   This is a 32 bit reloc for the microblaze that stores a
5266   value relative to the read-write small data area anchor
5267 ENUM
5268   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
5269 ENUMDOC
5270   This is a 32 bit reloc for the microblaze to handle
5271   expressions of the form "Symbol Op Symbol"
5272 ENUM
5273   BFD_RELOC_MICROBLAZE_64_NONE
5274 ENUMDOC
5275   This is a 64 bit reloc that stores the 32 bit pc relative
5276   value in two words (with an imm instruction).  No relocation is
5277   done here - only used for relaxing
5278 ENUM
5279   BFD_RELOC_MICROBLAZE_64_GOTPC
5280 ENUMDOC
5281   This is a 64 bit reloc that stores the 32 bit pc relative
5282   value in two words (with an imm instruction).  The relocation is
5283   PC-relative GOT offset
5284 ENUM
5285   BFD_RELOC_MICROBLAZE_64_GOT
5286 ENUMDOC
5287   This is a 64 bit reloc that stores the 32 bit pc relative
5288   value in two words (with an imm instruction).  The relocation is
5289   GOT offset
5290 ENUM
5291   BFD_RELOC_MICROBLAZE_64_PLT
5292 ENUMDOC
5293   This is a 64 bit reloc that stores the 32 bit pc relative
5294   value in two words (with an imm instruction).  The relocation is
5295   PC-relative offset into PLT
5296 ENUM
5297   BFD_RELOC_MICROBLAZE_64_GOTOFF
5298 ENUMDOC
5299   This is a 64 bit reloc that stores the 32 bit GOT relative
5300   value in two words (with an imm instruction).  The relocation is
5301   relative offset from _GLOBAL_OFFSET_TABLE_
5302 ENUM
5303   BFD_RELOC_MICROBLAZE_32_GOTOFF
5304 ENUMDOC
5305   This is a 32 bit reloc that stores the 32 bit GOT relative
5306   value in a word.  The relocation is relative offset from
5307   _GLOBAL_OFFSET_TABLE_
5308 ENUM
5309   BFD_RELOC_MICROBLAZE_COPY
5310 ENUMDOC
5311   This is used to tell the dynamic linker to copy the value out of
5312   the dynamic object into the runtime process image.
5313
5314
5315 ENDSENUM
5316   BFD_RELOC_UNUSED
5317 CODE_FRAGMENT
5318 .
5319 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
5320 */
5321
5322 /*
5323 FUNCTION
5324         bfd_reloc_type_lookup
5325         bfd_reloc_name_lookup
5326
5327 SYNOPSIS
5328         reloc_howto_type *bfd_reloc_type_lookup
5329           (bfd *abfd, bfd_reloc_code_real_type code);
5330         reloc_howto_type *bfd_reloc_name_lookup
5331           (bfd *abfd, const char *reloc_name);
5332
5333 DESCRIPTION
5334         Return a pointer to a howto structure which, when
5335         invoked, will perform the relocation @var{code} on data from the
5336         architecture noted.
5337
5338 */
5339
5340 reloc_howto_type *
5341 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5342 {
5343   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
5344 }
5345
5346 reloc_howto_type *
5347 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
5348 {
5349   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
5350 }
5351
5352 static reloc_howto_type bfd_howto_32 =
5353 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
5354
5355 /*
5356 INTERNAL_FUNCTION
5357         bfd_default_reloc_type_lookup
5358
5359 SYNOPSIS
5360         reloc_howto_type *bfd_default_reloc_type_lookup
5361           (bfd *abfd, bfd_reloc_code_real_type  code);
5362
5363 DESCRIPTION
5364         Provides a default relocation lookup routine for any architecture.
5365
5366 */
5367
5368 reloc_howto_type *
5369 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5370 {
5371   switch (code)
5372     {
5373     case BFD_RELOC_CTOR:
5374       /* The type of reloc used in a ctor, which will be as wide as the
5375          address - so either a 64, 32, or 16 bitter.  */
5376       switch (bfd_get_arch_info (abfd)->bits_per_address)
5377         {
5378         case 64:
5379           BFD_FAIL ();
5380         case 32:
5381           return &bfd_howto_32;
5382         case 16:
5383           BFD_FAIL ();
5384         default:
5385           BFD_FAIL ();
5386         }
5387     default:
5388       BFD_FAIL ();
5389     }
5390   return NULL;
5391 }
5392
5393 /*
5394 FUNCTION
5395         bfd_get_reloc_code_name
5396
5397 SYNOPSIS
5398         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
5399
5400 DESCRIPTION
5401         Provides a printable name for the supplied relocation code.
5402         Useful mainly for printing error messages.
5403 */
5404
5405 const char *
5406 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
5407 {
5408   if (code > BFD_RELOC_UNUSED)
5409     return 0;
5410   return bfd_reloc_code_real_names[code];
5411 }
5412
5413 /*
5414 INTERNAL_FUNCTION
5415         bfd_generic_relax_section
5416
5417 SYNOPSIS
5418         bfd_boolean bfd_generic_relax_section
5419           (bfd *abfd,
5420            asection *section,
5421            struct bfd_link_info *,
5422            bfd_boolean *);
5423
5424 DESCRIPTION
5425         Provides default handling for relaxing for back ends which
5426         don't do relaxing.
5427 */
5428
5429 bfd_boolean
5430 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
5431                            asection *section ATTRIBUTE_UNUSED,
5432                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
5433                            bfd_boolean *again)
5434 {
5435   if (link_info->relocatable)
5436     (*link_info->callbacks->einfo)
5437       (_("%P%F: --relax and -r may not be used together\n"));
5438
5439   *again = FALSE;
5440   return TRUE;
5441 }
5442
5443 /*
5444 INTERNAL_FUNCTION
5445         bfd_generic_gc_sections
5446
5447 SYNOPSIS
5448         bfd_boolean bfd_generic_gc_sections
5449           (bfd *, struct bfd_link_info *);
5450
5451 DESCRIPTION
5452         Provides default handling for relaxing for back ends which
5453         don't do section gc -- i.e., does nothing.
5454 */
5455
5456 bfd_boolean
5457 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
5458                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
5459 {
5460   return TRUE;
5461 }
5462
5463 /*
5464 INTERNAL_FUNCTION
5465         bfd_generic_merge_sections
5466
5467 SYNOPSIS
5468         bfd_boolean bfd_generic_merge_sections
5469           (bfd *, struct bfd_link_info *);
5470
5471 DESCRIPTION
5472         Provides default handling for SEC_MERGE section merging for back ends
5473         which don't have SEC_MERGE support -- i.e., does nothing.
5474 */
5475
5476 bfd_boolean
5477 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
5478                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
5479 {
5480   return TRUE;
5481 }
5482
5483 /*
5484 INTERNAL_FUNCTION
5485         bfd_generic_get_relocated_section_contents
5486
5487 SYNOPSIS
5488         bfd_byte *bfd_generic_get_relocated_section_contents
5489           (bfd *abfd,
5490            struct bfd_link_info *link_info,
5491            struct bfd_link_order *link_order,
5492            bfd_byte *data,
5493            bfd_boolean relocatable,
5494            asymbol **symbols);
5495
5496 DESCRIPTION
5497         Provides default handling of relocation effort for back ends
5498         which can't be bothered to do it efficiently.
5499
5500 */
5501
5502 bfd_byte *
5503 bfd_generic_get_relocated_section_contents (bfd *abfd,
5504                                             struct bfd_link_info *link_info,
5505                                             struct bfd_link_order *link_order,
5506                                             bfd_byte *data,
5507                                             bfd_boolean relocatable,
5508                                             asymbol **symbols)
5509 {
5510   bfd *input_bfd = link_order->u.indirect.section->owner;
5511   asection *input_section = link_order->u.indirect.section;
5512   long reloc_size;
5513   arelent **reloc_vector;
5514   long reloc_count;
5515   bfd_size_type sz;
5516
5517   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
5518   if (reloc_size < 0)
5519     return NULL;
5520
5521   /* Read in the section.  */
5522   sz = input_section->rawsize ? input_section->rawsize : input_section->size;
5523   if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
5524     return NULL;
5525
5526   if (reloc_size == 0)
5527     return data;
5528
5529   reloc_vector = (arelent **) bfd_malloc (reloc_size);
5530   if (reloc_vector == NULL)
5531     return NULL;
5532
5533   reloc_count = bfd_canonicalize_reloc (input_bfd,
5534                                         input_section,
5535                                         reloc_vector,
5536                                         symbols);
5537   if (reloc_count < 0)
5538     goto error_return;
5539
5540   if (reloc_count > 0)
5541     {
5542       arelent **parent;
5543       for (parent = reloc_vector; *parent != NULL; parent++)
5544         {
5545           char *error_message = NULL;
5546           asymbol *symbol;
5547           bfd_reloc_status_type r;
5548
5549           symbol = *(*parent)->sym_ptr_ptr;
5550           if (symbol->section && elf_discarded_section (symbol->section))
5551             {
5552               bfd_byte *p;
5553               static reloc_howto_type none_howto
5554                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
5555                          "unused", FALSE, 0, 0, FALSE);
5556
5557               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
5558               _bfd_clear_contents ((*parent)->howto, input_bfd, p);
5559               (*parent)->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;
5560               (*parent)->addend = 0;
5561               (*parent)->howto = &none_howto;
5562               r = bfd_reloc_ok;
5563             }
5564           else
5565             r = bfd_perform_relocation (input_bfd,
5566                                         *parent,
5567                                         data,
5568                                         input_section,
5569                                         relocatable ? abfd : NULL,
5570                                         &error_message);
5571
5572           if (relocatable)
5573             {
5574               asection *os = input_section->output_section;
5575
5576               /* A partial link, so keep the relocs.  */
5577               os->orelocation[os->reloc_count] = *parent;
5578               os->reloc_count++;
5579             }
5580
5581           if (r != bfd_reloc_ok)
5582             {
5583               switch (r)
5584                 {
5585                 case bfd_reloc_undefined:
5586                   if (!((*link_info->callbacks->undefined_symbol)
5587                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5588                          input_bfd, input_section, (*parent)->address,
5589                          TRUE)))
5590                     goto error_return;
5591                   break;
5592                 case bfd_reloc_dangerous:
5593                   BFD_ASSERT (error_message != NULL);
5594                   if (!((*link_info->callbacks->reloc_dangerous)
5595                         (link_info, error_message, input_bfd, input_section,
5596                          (*parent)->address)))
5597                     goto error_return;
5598                   break;
5599                 case bfd_reloc_overflow:
5600                   if (!((*link_info->callbacks->reloc_overflow)
5601                         (link_info, NULL,
5602                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5603                          (*parent)->howto->name, (*parent)->addend,
5604                          input_bfd, input_section, (*parent)->address)))
5605                     goto error_return;
5606                   break;
5607                 case bfd_reloc_outofrange:
5608                 default:
5609                   abort ();
5610                   break;
5611                 }
5612
5613             }
5614         }
5615     }
5616
5617   free (reloc_vector);
5618   return data;
5619
5620 error_return:
5621   free (reloc_vector);
5622   return NULL;
5623 }