bfd/coff-maxq.c

   1 /* BFD back-end for MAXQ COFF binaries.
   2    Copyright 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
   3
   4    Contributed by Vineet Sharma (vineets@noida.hcltech.com) Inderpreet S.
   5    (inderpreetb@noida.hcltech.com)
   6
   7    HCL Technologies Ltd.
   8
   9    This file is part of BFD, the Binary File Descriptor library.
  10
  11    This program is free software; you can redistribute it and/or modify it
  12    under the terms of the GNU General Public License as published by the Free
  13    Software Foundation; either version 3 of the License, or (at your option)
  14    any later version.
  15
  16    This program is distributed in the hope that it will be useful, but
  17    WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  18    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  19    for more details.
  20
  21    You should have received a copy of the GNU General Public License along
  22    with this program; if not, write to the Free Software Foundation, Inc.,
  23    51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
  24
  25 #include "sysdep.h"
  26 #include "bfd.h"
  27 #include "libbfd.h"
  28 #include "coff/maxq.h"
  29 #include "coff/internal.h"
  30 #include "libcoff.h"
  31 #include "libiberty.h"
  32
  33 #ifndef MAXQ20
  34 #define MAXQ20 1
  35 #endif
  36
  37 #define RTYPE2HOWTO(cache_ptr, dst)                                     \
  38   ((cache_ptr)->howto =                                                 \
  39    ((dst)->r_type < 48                                                  \
  40     ? howto_table + (((dst)->r_type==47) ? 6: ((dst)->r_type))          \
  41     : NULL))
  42
  43 #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2)
  44
  45 /* Code to swap in the reloc offset.  */
  46 #define SWAP_IN_RELOC_OFFSET    H_GET_16
  47 #define SWAP_OUT_RELOC_OFFSET   H_PUT_16
  48
  49 #define SHORT_JUMP              BFD_RELOC_16_PCREL_S2
  50 #define LONG_JUMP               BFD_RELOC_14
  51 #define ABSOLUTE_ADDR_FOR_DATA  BFD_RELOC_24
  52
  53 /* checks the range of short jump -127 to 128 */
  54 #define IS_SJUMP_RANGE(x) ((x > -128) && (x < 129))
  55 #define HIGH_WORD_MASK    0xff00
  56 #define LOW_WORD_MASK     0x00ff
  57
  58 static long
  59 get_symbol_value (asymbol *symbol)
  60 {
  61   long relocation = 0;
  62
  63   if (bfd_is_com_section (symbol->section))
  64     relocation = 0;
  65   else
  66     relocation = symbol->value +
  67       symbol->section->output_section->vma + symbol->section->output_offset;
  68
  69   return relocation;
  70 }
  71
  72 /* This function performs all the maxq relocations.
  73    FIXME:  The handling of the addend in the 'BFD_*'
  74    relocations types.  */
  75
  76 static bfd_reloc_status_type
  77 coff_maxq20_reloc (bfd *      abfd,
  78                    arelent *  reloc_entry,
  79                    asymbol *  symbol_in,
  80                    void *     data,
  81                    asection * input_section ATTRIBUTE_UNUSED,
  82                    bfd *      output_bfd    ATTRIBUTE_UNUSED,
  83                    char **    error_message ATTRIBUTE_UNUSED)
  84 {
  85   unsigned char *addr = NULL;
  86   unsigned long x = 0;
  87   long call_addr = 0;
  88   short addend = 0;
  89   long diff = 0;
  90
  91   /* If this is an undefined symbol, return error.  */
  92   if (symbol_in->section == &bfd_und_section
  93       && (symbol_in->flags & BSF_WEAK) == 0)
  94     return bfd_reloc_continue;
  95
  96   if (data && reloc_entry)
  97     {
  98       addr = (unsigned char *) data + reloc_entry->address;
  99       call_addr = call_addr - call_addr;
 100       call_addr = get_symbol_value (symbol_in);
 101
 102       /* Over here the value val stores the 8 bit/16 bit value. We will put a
 103          check if we are moving a 16 bit immediate value into an 8 bit
 104          register. In that case we will generate a Upper bytes into PFX[0]
 105          and move the lower 8 bits as SRC.  */
 106
 107       switch (reloc_entry->howto->type)
 108         {
 109           /* BFD_RELOC_16_PCREL_S2 47 Handles all the relative jumps and
 110              calls Note: Every relative jump or call is in words.  */
 111         case SHORT_JUMP:
 112           /* Handle any addend.  */
 113           addend = reloc_entry->addend;
 114
 115           if (addend > call_addr || addend > 0)
 116             call_addr = symbol_in->section->output_section->vma + addend;
 117           else if (addend < call_addr && addend > 0)
 118             call_addr = call_addr + addend;
 119           else if (addend < 0)
 120             call_addr = call_addr + addend;
 121
 122           diff = ((call_addr << 1) - (reloc_entry->address << 1));
 123
 124           if (!IS_SJUMP_RANGE (diff))
 125             {
 126               bfd_perror (_("Can't Make it a Short Jump"));
 127               return bfd_reloc_outofrange;
 128             }
 129
 130           x = bfd_get_16 (abfd, addr);
 131
 132           x = x & LOW_WORD_MASK;
 133           x = x | (diff << 8);
 134           bfd_put_16 (abfd, (bfd_vma) x, addr);
 135
 136           return bfd_reloc_ok;
 137
 138         case ABSOLUTE_ADDR_FOR_DATA:
 139         case LONG_JUMP:
 140           /* BFD_RELOC_14 Handles intersegment or long jumps which might be
 141              from code to code or code to data segment jumps. Note: When this
 142              fucntion is called by gas the section flags somehow do not
 143              contain the info about the section type(CODE or DATA). Thus the
 144              user needs to evoke the linker after assembling the files
 145              because the Code-Code relocs are word aligned but code-data are
 146              byte aligned.  */
 147           addend = (reloc_entry->addend - reloc_entry->addend);
 148
 149           /* Handle any addend.  */
 150           addend = reloc_entry->addend;
 151
 152           /* For relocation involving multiple file added becomes zero thus
 153              this fails - check for zero added. In another case when we try
 154              to add a stub to a file the addend shows the offset from the
 155              start od this file.  */
 156           addend = 0;
 157
 158           if (!bfd_is_com_section (symbol_in->section) &&
 159               ((symbol_in->flags & BSF_OLD_COMMON) == 0))
 160             {
 161               if (reloc_entry->addend > symbol_in->value)
 162                 addend = reloc_entry->addend - symbol_in->value;
 163
 164               if ((reloc_entry->addend < symbol_in->value)
 165                   && (reloc_entry->addend != 0))
 166                 addend = reloc_entry->addend - symbol_in->value;
 167
 168               if (reloc_entry->addend == symbol_in->value)
 169                 addend = 0;
 170             }
 171
 172           if (bfd_is_com_section (symbol_in->section) ||
 173               ((symbol_in->flags & BSF_OLD_COMMON) != 0))
 174             addend = reloc_entry->addend;
 175
 176           if (addend < 0
 177               &&  (call_addr < (long) (addend * (-1))))
 178             addend = 0;
 179
 180           call_addr += addend;
 181
 182           /* FIXME: This check does not work well with the assembler,
 183              linker needs to be run always.  */
 184           if ((symbol_in->section->flags & SEC_CODE) == SEC_CODE)
 185             {
 186               /* Convert it into words.  */
 187               call_addr = call_addr >> 1;
 188
 189               if (call_addr > 0xFFFF)   /* Intersegment Jump.  */
 190                 {
 191                   bfd_perror (_("Exceeds Long Jump Range"));
 192                   return bfd_reloc_outofrange;
 193                 }
 194             }
 195           else
 196             {
 197               /* case ABSOLUTE_ADDR_FOR_DATA : Resolves any code-data
 198                  segemnt relocs. These are NOT word aligned.  */
 199
 200               if (call_addr > 0xFFFF)   /* Intersegment Jump.  */
 201                 {
 202                   bfd_perror (_("Absolute address Exceeds 16 bit Range"));
 203                   return bfd_reloc_outofrange;
 204                 }
 205             }
 206
 207           x = bfd_get_32 (abfd, addr);
 208
 209           x = (x & 0xFF00FF00);
 210           x = (x | ((call_addr & HIGH_WORD_MASK) >> 8));
 211           x = (x | (call_addr & LOW_WORD_MASK) << 16);
 212
 213           bfd_put_32 (abfd, (bfd_vma) x, addr);
 214           return bfd_reloc_ok;
 215
 216         case BFD_RELOC_8:
 217           addend = (reloc_entry->addend - reloc_entry->addend);
 218
 219           if (!bfd_is_com_section (symbol_in->section) &&
 220               ((symbol_in->flags & BSF_OLD_COMMON) == 0))
 221             {
 222               if (reloc_entry->addend > symbol_in->value)
 223                 addend = reloc_entry->addend - symbol_in->value;
 224               if (reloc_entry->addend < symbol_in->value)
 225                 addend = reloc_entry->addend - symbol_in->value;
 226               if (reloc_entry->addend == symbol_in->value)
 227                 addend = 0;
 228             }
 229
 230           if (bfd_is_com_section (symbol_in->section) ||
 231               ((symbol_in->flags & BSF_OLD_COMMON) != 0))
 232             addend = reloc_entry->addend;
 233
 234           if (addend < 0
 235               && (call_addr < (long) (addend * (-1))))
 236             addend = 0;
 237
 238           if (call_addr + addend > 0xFF)
 239             {
 240               bfd_perror (_("Absolute address Exceeds 8 bit Range"));
 241               return bfd_reloc_outofrange;
 242             }
 243
 244           x = bfd_get_8 (abfd, addr);
 245           x = x & 0x00;
 246           x = x | (call_addr + addend);
 247
 248           bfd_put_8 (abfd, (bfd_vma) x, addr);
 249           return bfd_reloc_ok;
 250
 251         case BFD_RELOC_16:
 252           addend = (reloc_entry->addend - reloc_entry->addend);
 253           if (!bfd_is_com_section (symbol_in->section) &&
 254               ((symbol_in->flags & BSF_OLD_COMMON) == 0))
 255             {
 256               if (reloc_entry->addend > symbol_in->value)
 257                 addend = reloc_entry->addend - symbol_in->value;
 258
 259               if (reloc_entry->addend < symbol_in->value)
 260                 addend = reloc_entry->addend - symbol_in->value;
 261
 262               if (reloc_entry->addend == symbol_in->value)
 263                 addend = 0;
 264             }
 265
 266           if (bfd_is_com_section (symbol_in->section) ||
 267               ((symbol_in->flags & BSF_OLD_COMMON) != 0))
 268             addend = reloc_entry->addend;
 269
 270           if (addend < 0
 271               && (call_addr < (long) (addend * (-1))))
 272             addend = 0;
 273
 274           if ((call_addr + addend) > 0xFFFF)
 275             {
 276               bfd_perror (_("Absolute address Exceeds 16 bit Range"));
 277               return bfd_reloc_outofrange;
 278             }
 279           else
 280             {
 281               unsigned short val = (call_addr + addend);
 282
 283               x = bfd_get_16 (abfd, addr);
 284
 285               /* LE */
 286               x = (x & 0x0000); /* Flush garbage value.  */
 287               x = val;
 288               if ((symbol_in->section->flags & SEC_CODE) == SEC_CODE)
 289                 x = x >> 1;     /* Convert it into words.  */
 290             }
 291
 292           bfd_put_16 (abfd, (bfd_vma) x, addr);
 293           return bfd_reloc_ok;
 294
 295         case BFD_RELOC_32:
 296           addend = (reloc_entry->addend - reloc_entry->addend);
 297
 298           if (!bfd_is_com_section (symbol_in->section) &&
 299               ((symbol_in->flags & BSF_OLD_COMMON) == 0))
 300             {
 301               if (reloc_entry->addend > symbol_in->value)
 302                 addend = reloc_entry->addend - symbol_in->value;
 303               if (reloc_entry->addend < symbol_in->value)
 304                 addend = reloc_entry->addend - symbol_in->value;
 305               if (reloc_entry->addend == symbol_in->value)
 306                 addend = 0;
 307             }
 308
 309           if (bfd_is_com_section (symbol_in->section) ||
 310               ((symbol_in->flags & BSF_OLD_COMMON) != 0))
 311             addend = reloc_entry->addend;
 312
 313           if (addend < 0
 314               && (call_addr < (long) (addend * (-1))))
 315             addend = 0;
 316
 317           if ((call_addr + addend) < 0)
 318             {
 319               bfd_perror ("Absolute address Exceeds 32 bit Range");
 320               return bfd_reloc_outofrange;
 321             }
 322
 323           x = bfd_get_32 (abfd, addr);
 324           x = (x & 0x0000);     /* Flush garbage value.  */
 325           x = call_addr + addend;
 326           if ((symbol_in->section->flags & SEC_CODE) == SEC_CODE)
 327             x = x >> 1; /* Convert it into words.  */
 328
 329           bfd_put_32 (abfd, (bfd_vma) x, addr);
 330           return bfd_reloc_ok;
 331
 332         default:
 333           bfd_perror (_("Unrecognized Reloc Type"));
 334           return bfd_reloc_notsupported;
 335         }
 336     }
 337
 338   return bfd_reloc_notsupported;
 339 }
 340
 341 static reloc_howto_type howto_table[] =
 342 {
 343   EMPTY_HOWTO (0),
 344   EMPTY_HOWTO (1),
 345   {
 346    BFD_RELOC_32, 0, 1, 8, FALSE, 0, complain_overflow_bitfield,
 347    coff_maxq20_reloc, "32Bit", TRUE, 0x000000ff, 0x000000ff, TRUE
 348   },
 349   {
 350    SHORT_JUMP, 0, 1, 8, FALSE, 0, complain_overflow_bitfield,
 351    coff_maxq20_reloc, "SHORT_JMP", TRUE, 0x000000ff, 0x000000ff, TRUE
 352   },
 353   {
 354    ABSOLUTE_ADDR_FOR_DATA, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
 355    coff_maxq20_reloc, "INTERSEGMENT_RELOC", TRUE, 0x00000000, 0x00000000,
 356    FALSE
 357   },
 358   {
 359    BFD_RELOC_16, 0, 1, 8, FALSE, 0, complain_overflow_bitfield,
 360    coff_maxq20_reloc, "16Bit", TRUE, 0x000000ff, 0x000000ff, TRUE
 361   },
 362   {
 363    LONG_JUMP, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
 364    coff_maxq20_reloc, "LONG_JUMP", TRUE, 0x00000000, 0x00000000, FALSE
 365   },
 366   {
 367    BFD_RELOC_8, 0, 1, 8, FALSE, 0, complain_overflow_bitfield,
 368    coff_maxq20_reloc, "8bit", TRUE, 0x000000ff, 0x000000ff, TRUE
 369   },
 370   EMPTY_HOWTO (8),
 371   EMPTY_HOWTO (9),
 372   EMPTY_HOWTO (10),
 373 };
 374
 375 static reloc_howto_type *
 376 maxq_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
 377                         bfd_reloc_code_real_type code)
 378 {
 379   switch (code)
 380     {
 381       /* SHORT JUMP */
 382     case BFD_RELOC_16_PCREL_S2:
 383       return howto_table + 3;
 384
 385       /* INTERSEGMENT JUMP */
 386     case BFD_RELOC_24:
 387       return howto_table + 4;
 388
 389       /* BYTE RELOC */
 390     case BFD_RELOC_8:
 391       return howto_table + 7;
 392
 393       /* WORD RELOC */
 394     case BFD_RELOC_16:
 395       return howto_table + 5;
 396
 397       /* LONG RELOC */
 398     case BFD_RELOC_32:
 399       return howto_table + 2;
 400
 401       /* LONG JUMP */
 402     case BFD_RELOC_14:
 403       return howto_table + 6;
 404
 405     default:
 406       return NULL;
 407     }
 408 }
 409
 410 static reloc_howto_type *
 411 maxq_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED, const char *r_name)
 412 {
 413   unsigned int i;
 414
 415   for (i = 0; i < sizeof (howto_table) / sizeof (howto_table[0]); i++)
 416     if (howto_table[i].name != NULL
 417         && strcasecmp (howto_table[i].name, r_name) == 0)
 418       return &howto_table[i];
 419
 420   return NULL;
 421 }
 422
 423 #define coff_bfd_reloc_type_lookup maxq_reloc_type_lookup
 424 #define coff_bfd_reloc_name_lookup maxq_reloc_name_lookup
 425
 426 /* Perform any necessary magic to the addend in a reloc entry.  */
 427 #define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
 428  cache_ptr->addend =  ext_reloc.r_offset;
 429
 430 #ifndef bfd_pe_print_pdata
 431 #define bfd_pe_print_pdata      NULL
 432 #endif
 433
 434 #include "coffcode.h"
 435
 436 #ifndef TARGET_UNDERSCORE
 437 #define TARGET_UNDERSCORE 1
 438 #endif
 439
 440 #ifndef EXTRA_S_FLAGS
 441 #define EXTRA_S_FLAGS 0
 442 #endif
 443
 444 /* Forward declaration for use initialising alternative_target field.  */
 445 CREATE_LITTLE_COFF_TARGET_VEC (maxqcoff_vec, "coff-maxq", 0, EXTRA_S_FLAGS,
 446                                TARGET_UNDERSCORE, NULL, COFF_SWAP_TABLE);
 447