include/opcode/ppc.h

   1 /* ppc.h -- Header file for PowerPC opcode table
   2    Copyright 1994, 1995, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
   3    Free Software Foundation, Inc.
   4    Written by Ian Lance Taylor, Cygnus Support
   5
   6 This file is part of GDB, GAS, and the GNU binutils.
   7
   8 GDB, GAS, and the GNU binutils are free software; you can redistribute
   9 them and/or modify them under the terms of the GNU General Public
  10 License as published by the Free Software Foundation; either version
  11 1, or (at your option) any later version.
  12
  13 GDB, GAS, and the GNU binutils are distributed in the hope that they
  14 will be useful, but WITHOUT ANY WARRANTY; without even the implied
  15 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
  16 the GNU General Public License for more details.
  17
  18 You should have received a copy of the GNU General Public License
  19 along with this file; see the file COPYING.  If not, write to the Free
  20 Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.  */
  21
  22 #ifndef PPC_H
  23 #define PPC_H
  24
  25 /* The opcode table is an array of struct powerpc_opcode.  */
  26
  27 struct powerpc_opcode
  28 {
  29   /* The opcode name.  */
  30   const char *name;
  31
  32   /* The opcode itself.  Those bits which will be filled in with
  33      operands are zeroes.  */
  34   unsigned long opcode;
  35
  36   /* The opcode mask.  This is used by the disassembler.  This is a
  37      mask containing ones indicating those bits which must match the
  38      opcode field, and zeroes indicating those bits which need not
  39      match (and are presumably filled in by operands).  */
  40   unsigned long mask;
  41
  42   /* One bit flags for the opcode.  These are used to indicate which
  43      specific processors support the instructions.  The defined values
  44      are listed below.  */
  45   unsigned long flags;
  46
  47   /* An array of operand codes.  Each code is an index into the
  48      operand table.  They appear in the order which the operands must
  49      appear in assembly code, and are terminated by a zero.  */
  50   unsigned char operands[8];
  51 };
  52
  53 /* The table itself is sorted by major opcode number, and is otherwise
  54    in the order in which the disassembler should consider
  55    instructions.  */
  56 extern const struct powerpc_opcode powerpc_opcodes[];
  57 extern const int powerpc_num_opcodes;
  58
  59 /* Values defined for the flags field of a struct powerpc_opcode.  */
  60
  61 /* Opcode is defined for the PowerPC architecture.  */
  62 #define PPC_OPCODE_PPC                   1
  63
  64 /* Opcode is defined for the POWER (RS/6000) architecture.  */
  65 #define PPC_OPCODE_POWER                 2
  66
  67 /* Opcode is defined for the POWER2 (Rios 2) architecture.  */
  68 #define PPC_OPCODE_POWER2                4
  69
  70 /* Opcode is only defined on 32 bit architectures.  */
  71 #define PPC_OPCODE_32                    8
  72
  73 /* Opcode is only defined on 64 bit architectures.  */
  74 #define PPC_OPCODE_64                 0x10
  75
  76 /* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
  77    is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
  78    but it also supports many additional POWER instructions.  */
  79 #define PPC_OPCODE_601                0x20
  80
  81 /* Opcode is supported in both the Power and PowerPC architectures
  82    (ie, compiler's -mcpu=common or assembler's -mcom).  */
  83 #define PPC_OPCODE_COMMON             0x40
  84
  85 /* Opcode is supported for any Power or PowerPC platform (this is
  86    for the assembler's -many option, and it eliminates duplicates).  */
  87 #define PPC_OPCODE_ANY                0x80
  88
  89 /* Opcode is supported as part of the 64-bit bridge.  */
  90 #define PPC_OPCODE_64_BRIDGE         0x100
  91
  92 /* Opcode is supported by Altivec Vector Unit */
  93 #define PPC_OPCODE_ALTIVEC           0x200
  94
  95 /* Opcode is supported by PowerPC 403 processor.  */
  96 #define PPC_OPCODE_403               0x400
  97
  98 /* Opcode is supported by PowerPC BookE processor.  */
  99 #define PPC_OPCODE_BOOKE             0x800
 100
 101 /* Opcode is only supported by 64-bit PowerPC BookE processor.  */
 102 #define PPC_OPCODE_BOOKE64          0x1000
 103
 104 /* Opcode is supported by PowerPC 440 processor.  */
 105 #define PPC_OPCODE_440              0x2000
 106
 107 /* Opcode is only supported by Power4 architecture.  */
 108 #define PPC_OPCODE_POWER4           0x4000
 109
 110 /* Opcode isn't supported by Power4 architecture.  */
 111 #define PPC_OPCODE_NOPOWER4         0x8000
 112
 113 /* Opcode is only supported by POWERPC Classic architecture.  */
 114 #define PPC_OPCODE_CLASSIC         0x10000
 115
 116 /* Opcode is only supported by e500x2 Core.  */
 117 #define PPC_OPCODE_SPE             0x20000
 118
 119 /* Opcode is supported by e500x2 Integer select APU.  */
 120 #define PPC_OPCODE_ISEL            0x40000
 121
 122 /* Opcode is an e500 SPE floating point instruction.  */
 123 #define PPC_OPCODE_EFS             0x80000
 124
 125 /* Opcode is supported by branch locking APU.  */
 126 #define PPC_OPCODE_BRLOCK         0x100000
 127
 128 /* Opcode is supported by performance monitor APU.  */
 129 #define PPC_OPCODE_PMR            0x200000
 130
 131 /* Opcode is supported by cache locking APU.  */
 132 #define PPC_OPCODE_CACHELCK       0x400000
 133
 134 /* Opcode is supported by machine check APU.  */
 135 #define PPC_OPCODE_RFMCI          0x800000
 136
 137 /* Opcode is only supported by Power5 architecture.  */
 138 #define PPC_OPCODE_POWER5        0x1000000
 139
 140 /* Opcode is supported by PowerPC e300 family.  */
 141 #define PPC_OPCODE_E300          0x2000000
 142
 143 /* Opcode is only supported by Power6 architecture.  */
 144 #define PPC_OPCODE_POWER6        0x4000000
 145
 146 /* Opcode is only supported by PowerPC Cell family.  */
 147 #define PPC_OPCODE_CELL          0x8000000
 148
 149 /* A macro to extract the major opcode from an instruction.  */
 150 #define PPC_OP(i) (((i) >> 26) & 0x3f)
 151 \f
 152 /* The operands table is an array of struct powerpc_operand.  */
 153
 154 struct powerpc_operand
 155 {
 156   /* The number of bits in the operand.  */
 157   int bits;
 158
 159   /* How far the operand is left shifted in the instruction.  */
 160   int shift;
 161
 162   /* Insertion function.  This is used by the assembler.  To insert an
 163      operand value into an instruction, check this field.
 164
 165      If it is NULL, execute
 166          i |= (op & ((1 << o->bits) - 1)) << o->shift;
 167      (i is the instruction which we are filling in, o is a pointer to
 168      this structure, and op is the opcode value; this assumes twos
 169      complement arithmetic).
 170
 171      If this field is not NULL, then simply call it with the
 172      instruction and the operand value.  It will return the new value
 173      of the instruction.  If the ERRMSG argument is not NULL, then if
 174      the operand value is illegal, *ERRMSG will be set to a warning
 175      string (the operand will be inserted in any case).  If the
 176      operand value is legal, *ERRMSG will be unchanged (most operands
 177      can accept any value).  */
 178   unsigned long (*insert)
 179     (unsigned long instruction, long op, int dialect, const char **errmsg);
 180
 181   /* Extraction function.  This is used by the disassembler.  To
 182      extract this operand type from an instruction, check this field.
 183
 184      If it is NULL, compute
 185          op = ((i) >> o->shift) & ((1 << o->bits) - 1);
 186          if ((o->flags & PPC_OPERAND_SIGNED) != 0
 187              && (op & (1 << (o->bits - 1))) != 0)
 188            op -= 1 << o->bits;
 189      (i is the instruction, o is a pointer to this structure, and op
 190      is the result; this assumes twos complement arithmetic).
 191
 192      If this field is not NULL, then simply call it with the
 193      instruction value.  It will return the value of the operand.  If
 194      the INVALID argument is not NULL, *INVALID will be set to
 195      non-zero if this operand type can not actually be extracted from
 196      this operand (i.e., the instruction does not match).  If the
 197      operand is valid, *INVALID will not be changed.  */
 198   long (*extract) (unsigned long instruction, int dialect, int *invalid);
 199
 200   /* One bit syntax flags.  */
 201   unsigned long flags;
 202 };
 203
 204 /* Elements in the table are retrieved by indexing with values from
 205    the operands field of the powerpc_opcodes table.  */
 206
 207 extern const struct powerpc_operand powerpc_operands[];
 208
 209 /* Values defined for the flags field of a struct powerpc_operand.  */
 210
 211 /* This operand takes signed values.  */
 212 #define PPC_OPERAND_SIGNED (01)
 213
 214 /* This operand takes signed values, but also accepts a full positive
 215    range of values when running in 32 bit mode.  That is, if bits is
 216    16, it takes any value from -0x8000 to 0xffff.  In 64 bit mode,
 217    this flag is ignored.  */
 218 #define PPC_OPERAND_SIGNOPT (02)
 219
 220 /* This operand does not actually exist in the assembler input.  This
 221    is used to support extended mnemonics such as mr, for which two
 222    operands fields are identical.  The assembler should call the
 223    insert function with any op value.  The disassembler should call
 224    the extract function, ignore the return value, and check the value
 225    placed in the valid argument.  */
 226 #define PPC_OPERAND_FAKE (04)
 227
 228 /* The next operand should be wrapped in parentheses rather than
 229    separated from this one by a comma.  This is used for the load and
 230    store instructions which want their operands to look like
 231        reg,displacement(reg)
 232    */
 233 #define PPC_OPERAND_PARENS (010)
 234
 235 /* This operand may use the symbolic names for the CR fields, which
 236    are
 237        lt  0    gt  1   eq  2   so  3   un  3
 238        cr0 0    cr1 1   cr2 2   cr3 3
 239        cr4 4    cr5 5   cr6 6   cr7 7
 240    These may be combined arithmetically, as in cr2*4+gt.  These are
 241    only supported on the PowerPC, not the POWER.  */
 242 #define PPC_OPERAND_CR (020)
 243
 244 /* This operand names a register.  The disassembler uses this to print
 245    register names with a leading 'r'.  */
 246 #define PPC_OPERAND_GPR (040)
 247
 248 /* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0.  */
 249 #define PPC_OPERAND_GPR_0 (0100)
 250
 251 /* This operand names a floating point register.  The disassembler
 252    prints these with a leading 'f'.  */
 253 #define PPC_OPERAND_FPR (0200)
 254
 255 /* This operand is a relative branch displacement.  The disassembler
 256    prints these symbolically if possible.  */
 257 #define PPC_OPERAND_RELATIVE (0400)
 258
 259 /* This operand is an absolute branch address.  The disassembler
 260    prints these symbolically if possible.  */
 261 #define PPC_OPERAND_ABSOLUTE (01000)
 262
 263 /* This operand is optional, and is zero if omitted.  This is used for
 264    example, in the optional BF field in the comparison instructions.  The
 265    assembler must count the number of operands remaining on the line,
 266    and the number of operands remaining for the opcode, and decide
 267    whether this operand is present or not.  The disassembler should
 268    print this operand out only if it is not zero.  */
 269 #define PPC_OPERAND_OPTIONAL (02000)
 270
 271 /* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
 272    is omitted, then for the next operand use this operand value plus
 273    1, ignoring the next operand field for the opcode.  This wretched
 274    hack is needed because the Power rotate instructions can take
 275    either 4 or 5 operands.  The disassembler should print this operand
 276    out regardless of the PPC_OPERAND_OPTIONAL field.  */
 277 #define PPC_OPERAND_NEXT (04000)
 278
 279 /* This operand should be regarded as a negative number for the
 280    purposes of overflow checking (i.e., the normal most negative
 281    number is disallowed and one more than the normal most positive
 282    number is allowed).  This flag will only be set for a signed
 283    operand.  */
 284 #define PPC_OPERAND_NEGATIVE (010000)
 285
 286 /* This operand names a vector unit register.  The disassembler
 287    prints these with a leading 'v'.  */
 288 #define PPC_OPERAND_VR (020000)
 289
 290 /* This operand is for the DS field in a DS form instruction.  */
 291 #define PPC_OPERAND_DS (040000)
 292
 293 /* This operand is for the DQ field in a DQ form instruction.  */
 294 #define PPC_OPERAND_DQ (0100000)
 295 \f
 296 /* The POWER and PowerPC assemblers use a few macros.  We keep them
 297    with the operands table for simplicity.  The macro table is an
 298    array of struct powerpc_macro.  */
 299
 300 struct powerpc_macro
 301 {
 302   /* The macro name.  */
 303   const char *name;
 304
 305   /* The number of operands the macro takes.  */
 306   unsigned int operands;
 307
 308   /* One bit flags for the opcode.  These are used to indicate which
 309      specific processors support the instructions.  The values are the
 310      same as those for the struct powerpc_opcode flags field.  */
 311   unsigned long flags;
 312
 313   /* A format string to turn the macro into a normal instruction.
 314      Each %N in the string is replaced with operand number N (zero
 315      based).  */
 316   const char *format;
 317 };
 318
 319 extern const struct powerpc_macro powerpc_macros[];
 320 extern const int powerpc_num_macros;
 321
 322 #endif /* PPC_H */