bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  22    MA 02110-1301, USA.  */
  23
  24 /*
  25 SECTION
  26         Relocations
  27
  28         BFD maintains relocations in much the same way it maintains
  29         symbols: they are left alone until required, then read in
  30         en-masse and translated into an internal form.  A common
  31         routine <<bfd_perform_relocation>> acts upon the
  32         canonical form to do the fixup.
  33
  34         Relocations are maintained on a per section basis,
  35         while symbols are maintained on a per BFD basis.
  36
  37         All that a back end has to do to fit the BFD interface is to create
  38         a <<struct reloc_cache_entry>> for each relocation
  39         in a particular section, and fill in the right bits of the structures.
  40
  41 @menu
  42 @* typedef arelent::
  43 @* howto manager::
  44 @end menu
  45
  46 */
  47
  48 /* DO compile in the reloc_code name table from libbfd.h.  */
  49 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  50
  51 #include "sysdep.h"
  52 #include "bfd.h"
  53 #include "bfdlink.h"
  54 #include "libbfd.h"
  55 /*
  56 DOCDD
  57 INODE
  58         typedef arelent, howto manager, Relocations, Relocations
  59
  60 SUBSECTION
  61         typedef arelent
  62
  63         This is the structure of a relocation entry:
  64
  65 CODE_FRAGMENT
  66 .
  67 .typedef enum bfd_reloc_status
  68 .{
  69 .  {* No errors detected.  *}
  70 .  bfd_reloc_ok,
  71 .
  72 .  {* The relocation was performed, but there was an overflow.  *}
  73 .  bfd_reloc_overflow,
  74 .
  75 .  {* The address to relocate was not within the section supplied.  *}
  76 .  bfd_reloc_outofrange,
  77 .
  78 .  {* Used by special functions.  *}
  79 .  bfd_reloc_continue,
  80 .
  81 .  {* Unsupported relocation size requested.  *}
  82 .  bfd_reloc_notsupported,
  83 .
  84 .  {* Unused.  *}
  85 .  bfd_reloc_other,
  86 .
  87 .  {* The symbol to relocate against was undefined.  *}
  88 .  bfd_reloc_undefined,
  89 .
  90 .  {* The relocation was performed, but may not be ok - presently
  91 .     generated only when linking i960 coff files with i960 b.out
  92 .     symbols.  If this type is returned, the error_message argument
  93 .     to bfd_perform_relocation will be set.  *}
  94 .  bfd_reloc_dangerous
  95 . }
  96 . bfd_reloc_status_type;
  97 .
  98 .
  99 .typedef struct reloc_cache_entry
 100 .{
 101 .  {* A pointer into the canonical table of pointers.  *}
 102 .  struct bfd_symbol **sym_ptr_ptr;
 103 .
 104 .  {* offset in section.  *}
 105 .  bfd_size_type address;
 106 .
 107 .  {* addend for relocation value.  *}
 108 .  bfd_vma addend;
 109 .
 110 .  {* Pointer to how to perform the required relocation.  *}
 111 .  reloc_howto_type *howto;
 112 .
 113 .}
 114 .arelent;
 115 .
 116 */
 117
 118 /*
 119 DESCRIPTION
 120
 121         Here is a description of each of the fields within an <<arelent>>:
 122
 123         o <<sym_ptr_ptr>>
 124
 125         The symbol table pointer points to a pointer to the symbol
 126         associated with the relocation request.  It is the pointer
 127         into the table returned by the back end's
 128         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 129         referenced through a pointer to a pointer so that tools like
 130         the linker can fix up all the symbols of the same name by
 131         modifying only one pointer. The relocation routine looks in
 132         the symbol and uses the base of the section the symbol is
 133         attached to and the value of the symbol as the initial
 134         relocation offset. If the symbol pointer is zero, then the
 135         section provided is looked up.
 136
 137         o <<address>>
 138
 139         The <<address>> field gives the offset in bytes from the base of
 140         the section data which owns the relocation record to the first
 141         byte of relocatable information. The actual data relocated
 142         will be relative to this point; for example, a relocation
 143         type which modifies the bottom two bytes of a four byte word
 144         would not touch the first byte pointed to in a big endian
 145         world.
 146
 147         o <<addend>>
 148
 149         The <<addend>> is a value provided by the back end to be added (!)
 150         to the relocation offset. Its interpretation is dependent upon
 151         the howto. For example, on the 68k the code:
 152
 153 |        char foo[];
 154 |        main()
 155 |                {
 156 |                return foo[0x12345678];
 157 |                }
 158
 159         Could be compiled into:
 160
 161 |        linkw fp,#-4
 162 |        moveb @@#12345678,d0
 163 |        extbl d0
 164 |        unlk fp
 165 |        rts
 166
 167         This could create a reloc pointing to <<foo>>, but leave the
 168         offset in the data, something like:
 169
 170 |RELOCATION RECORDS FOR [.text]:
 171 |offset   type      value
 172 |00000006 32        _foo
 173 |
 174 |00000000 4e56 fffc          ; linkw fp,#-4
 175 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 176 |0000000a 49c0               ; extbl d0
 177 |0000000c 4e5e               ; unlk fp
 178 |0000000e 4e75               ; rts
 179
 180         Using coff and an 88k, some instructions don't have enough
 181         space in them to represent the full address range, and
 182         pointers have to be loaded in two parts. So you'd get something like:
 183
 184 |        or.u     r13,r0,hi16(_foo+0x12345678)
 185 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 186 |        jmp      r1
 187
 188         This should create two relocs, both pointing to <<_foo>>, and with
 189         0x12340000 in their addend field. The data would consist of:
 190
 191 |RELOCATION RECORDS FOR [.text]:
 192 |offset   type      value
 193 |00000002 HVRT16    _foo+0x12340000
 194 |00000006 LVRT16    _foo+0x12340000
 195 |
 196 |00000000 5da05678           ; or.u r13,r0,0x5678
 197 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 198 |00000008 f400c001           ; jmp r1
 199
 200         The relocation routine digs out the value from the data, adds
 201         it to the addend to get the original offset, and then adds the
 202         value of <<_foo>>. Note that all 32 bits have to be kept around
 203         somewhere, to cope with carry from bit 15 to bit 16.
 204
 205         One further example is the sparc and the a.out format. The
 206         sparc has a similar problem to the 88k, in that some
 207         instructions don't have room for an entire offset, but on the
 208         sparc the parts are created in odd sized lumps. The designers of
 209         the a.out format chose to not use the data within the section
 210         for storing part of the offset; all the offset is kept within
 211         the reloc. Anything in the data should be ignored.
 212
 213 |        save %sp,-112,%sp
 214 |        sethi %hi(_foo+0x12345678),%g2
 215 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 216 |        ret
 217 |        restore
 218
 219         Both relocs contain a pointer to <<foo>>, and the offsets
 220         contain junk.
 221
 222 |RELOCATION RECORDS FOR [.text]:
 223 |offset   type      value
 224 |00000004 HI22      _foo+0x12345678
 225 |00000008 LO10      _foo+0x12345678
 226 |
 227 |00000000 9de3bf90     ; save %sp,-112,%sp
 228 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 229 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 230 |0000000c 81c7e008     ; ret
 231 |00000010 81e80000     ; restore
 232
 233         o <<howto>>
 234
 235         The <<howto>> field can be imagined as a
 236         relocation instruction. It is a pointer to a structure which
 237         contains information on what to do with all of the other
 238         information in the reloc record and data section. A back end
 239         would normally have a relocation instruction set and turn
 240         relocations into pointers to the correct structure on input -
 241         but it would be possible to create each howto field on demand.
 242
 243 */
 244
 245 /*
 246 SUBSUBSECTION
 247         <<enum complain_overflow>>
 248
 249         Indicates what sort of overflow checking should be done when
 250         performing a relocation.
 251
 252 CODE_FRAGMENT
 253 .
 254 .enum complain_overflow
 255 .{
 256 .  {* Do not complain on overflow.  *}
 257 .  complain_overflow_dont,
 258 .
 259 .  {* Complain if the value overflows when considered as a signed
 260 .     number one bit larger than the field.  ie. A bitfield of N bits
 261 .     is allowed to represent -2**n to 2**n-1.  *}
 262 .  complain_overflow_bitfield,
 263 .
 264 .  {* Complain if the value overflows when considered as a signed
 265 .     number.  *}
 266 .  complain_overflow_signed,
 267 .
 268 .  {* Complain if the value overflows when considered as an
 269 .     unsigned number.  *}
 270 .  complain_overflow_unsigned
 271 .};
 272
 273 */
 274
 275 /*
 276 SUBSUBSECTION
 277         <<reloc_howto_type>>
 278
 279         The <<reloc_howto_type>> is a structure which contains all the
 280         information that libbfd needs to know to tie up a back end's data.
 281
 282 CODE_FRAGMENT
 283 .struct bfd_symbol;             {* Forward declaration.  *}
 284 .
 285 .struct reloc_howto_struct
 286 .{
 287 .  {*  The type field has mainly a documentary use - the back end can
 288 .      do what it wants with it, though normally the back end's
 289 .      external idea of what a reloc number is stored
 290 .      in this field.  For example, a PC relative word relocation
 291 .      in a coff environment has the type 023 - because that's
 292 .      what the outside world calls a R_PCRWORD reloc.  *}
 293 .  unsigned int type;
 294 .
 295 .  {*  The value the final relocation is shifted right by.  This drops
 296 .      unwanted data from the relocation.  *}
 297 .  unsigned int rightshift;
 298 .
 299 .  {*  The size of the item to be relocated.  This is *not* a
 300 .      power-of-two measure.  To get the number of bytes operated
 301 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 302 .  int size;
 303 .
 304 .  {*  The number of bits in the item to be relocated.  This is used
 305 .      when doing overflow checking.  *}
 306 .  unsigned int bitsize;
 307 .
 308 .  {*  The relocation is relative to the field being relocated.  *}
 309 .  bfd_boolean pc_relative;
 310 .
 311 .  {*  The bit position of the reloc value in the destination.
 312 .      The relocated value is left shifted by this amount.  *}
 313 .  unsigned int bitpos;
 314 .
 315 .  {* What type of overflow error should be checked for when
 316 .     relocating.  *}
 317 .  enum complain_overflow complain_on_overflow;
 318 .
 319 .  {* If this field is non null, then the supplied function is
 320 .     called rather than the normal function.  This allows really
 321 .     strange relocation methods to be accommodated (e.g., i960 callj
 322 .     instructions).  *}
 323 .  bfd_reloc_status_type (*special_function)
 324 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 325 .     bfd *, char **);
 326 .
 327 .  {* The textual name of the relocation type.  *}
 328 .  char *name;
 329 .
 330 .  {* Some formats record a relocation addend in the section contents
 331 .     rather than with the relocation.  For ELF formats this is the
 332 .     distinction between USE_REL and USE_RELA (though the code checks
 333 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 334 .     addend is recorded with the section contents; when performing a
 335 .     partial link (ld -r) the section contents (the data) will be
 336 .     modified.  The value of this field is FALSE if addends are
 337 .     recorded with the relocation (in arelent.addend); when performing
 338 .     a partial link the relocation will be modified.
 339 .     All relocations for all ELF USE_RELA targets should set this field
 340 .     to FALSE (values of TRUE should be looked on with suspicion).
 341 .     However, the converse is not true: not all relocations of all ELF
 342 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 343 .     to each particular target.  For relocs that aren't used in partial
 344 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 345 .  bfd_boolean partial_inplace;
 346 .
 347 .  {* src_mask selects the part of the instruction (or data) to be used
 348 .     in the relocation sum.  If the target relocations don't have an
 349 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 350 .     dst_mask to extract the addend from the section contents.  If
 351 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 352 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 353 .     bogus as in those cases the value in the dst_mask part of the
 354 .     section contents should be treated as garbage.  *}
 355 .  bfd_vma src_mask;
 356 .
 357 .  {* dst_mask selects which parts of the instruction (or data) are
 358 .     replaced with a relocated value.  *}
 359 .  bfd_vma dst_mask;
 360 .
 361 .  {* When some formats create PC relative instructions, they leave
 362 .     the value of the pc of the place being relocated in the offset
 363 .     slot of the instruction, so that a PC relative relocation can
 364 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 365 .     Some formats leave the displacement part of an instruction
 366 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 367 .  bfd_boolean pcrel_offset;
 368 .};
 369 .
 370 */
 371
 372 /*
 373 FUNCTION
 374         The HOWTO Macro
 375
 376 DESCRIPTION
 377         The HOWTO define is horrible and will go away.
 378
 379 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 380 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 381
 382 DESCRIPTION
 383         And will be replaced with the totally magic way. But for the
 384         moment, we are compatible, so do it this way.
 385
 386 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 387 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 388 .         NAME, FALSE, 0, 0, IN)
 389 .
 390
 391 DESCRIPTION
 392         This is used to fill in an empty howto entry in an array.
 393
 394 .#define EMPTY_HOWTO(C) \
 395 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 396 .         NULL, FALSE, 0, 0, FALSE)
 397 .
 398
 399 DESCRIPTION
 400         Helper routine to turn a symbol into a relocation value.
 401
 402 .#define HOWTO_PREPARE(relocation, symbol)               \
 403 .  {                                                     \
 404 .    if (symbol != NULL)                                 \
 405 .      {                                                 \
 406 .        if (bfd_is_com_section (symbol->section))       \
 407 .          {                                             \
 408 .            relocation = 0;                             \
 409 .          }                                             \
 410 .        else                                            \
 411 .          {                                             \
 412 .            relocation = symbol->value;                 \
 413 .          }                                             \
 414 .      }                                                 \
 415 .  }
 416 .
 417 */
 418
 419 /*
 420 FUNCTION
 421         bfd_get_reloc_size
 422
 423 SYNOPSIS
 424         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 425
 426 DESCRIPTION
 427         For a reloc_howto_type that operates on a fixed number of bytes,
 428         this returns the number of bytes operated on.
 429  */
 430
 431 unsigned int
 432 bfd_get_reloc_size (reloc_howto_type *howto)
 433 {
 434   switch (howto->size)
 435     {
 436     case 0: return 1;
 437     case 1: return 2;
 438     case 2: return 4;
 439     case 3: return 0;
 440     case 4: return 8;
 441     case 8: return 16;
 442     case -2: return 4;
 443     default: abort ();
 444     }
 445 }
 446
 447 /*
 448 TYPEDEF
 449         arelent_chain
 450
 451 DESCRIPTION
 452
 453         How relocs are tied together in an <<asection>>:
 454
 455 .typedef struct relent_chain
 456 .{
 457 .  arelent relent;
 458 .  struct relent_chain *next;
 459 .}
 460 .arelent_chain;
 461 .
 462 */
 463
 464 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 465 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 466
 467 /*
 468 FUNCTION
 469         bfd_check_overflow
 470
 471 SYNOPSIS
 472         bfd_reloc_status_type bfd_check_overflow
 473           (enum complain_overflow how,
 474            unsigned int bitsize,
 475            unsigned int rightshift,
 476            unsigned int addrsize,
 477            bfd_vma relocation);
 478
 479 DESCRIPTION
 480         Perform overflow checking on @var{relocation} which has
 481         @var{bitsize} significant bits and will be shifted right by
 482         @var{rightshift} bits, on a machine with addresses containing
 483         @var{addrsize} significant bits.  The result is either of
 484         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 485
 486 */
 487
 488 bfd_reloc_status_type
 489 bfd_check_overflow (enum complain_overflow how,
 490                     unsigned int bitsize,
 491                     unsigned int rightshift,
 492                     unsigned int addrsize,
 493                     bfd_vma relocation)
 494 {
 495   bfd_vma fieldmask, addrmask, signmask, ss, a;
 496   bfd_reloc_status_type flag = bfd_reloc_ok;
 497
 498   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 499      we'll be permissive: extra bits in the field mask will
 500      automatically extend the address mask for purposes of the
 501      overflow check.  */
 502   fieldmask = N_ONES (bitsize);
 503   signmask = ~fieldmask;
 504   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 505   a = (relocation & addrmask) >> rightshift;;
 506
 507   switch (how)
 508     {
 509     case complain_overflow_dont:
 510       break;
 511
 512     case complain_overflow_signed:
 513       /* If any sign bits are set, all sign bits must be set.  That
 514          is, A must be a valid negative address after shifting.  */
 515       signmask = ~ (fieldmask >> 1);
 516       /* Fall thru */
 517
 518     case complain_overflow_bitfield:
 519       /* Bitfields are sometimes signed, sometimes unsigned.  We
 520          explicitly allow an address wrap too, which means a bitfield
 521          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 522          if the value has some, but not all, bits set outside the
 523          field.  */
 524       ss = a & signmask;
 525       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 526         flag = bfd_reloc_overflow;
 527       break;
 528
 529     case complain_overflow_unsigned:
 530       /* We have an overflow if the address does not fit in the field.  */
 531       if ((a & signmask) != 0)
 532         flag = bfd_reloc_overflow;
 533       break;
 534
 535     default:
 536       abort ();
 537     }
 538
 539   return flag;
 540 }
 541
 542 /*
 543 FUNCTION
 544         bfd_perform_relocation
 545
 546 SYNOPSIS
 547         bfd_reloc_status_type bfd_perform_relocation
 548           (bfd *abfd,
 549            arelent *reloc_entry,
 550            void *data,
 551            asection *input_section,
 552            bfd *output_bfd,
 553            char **error_message);
 554
 555 DESCRIPTION
 556         If @var{output_bfd} is supplied to this function, the
 557         generated image will be relocatable; the relocations are
 558         copied to the output file after they have been changed to
 559         reflect the new state of the world. There are two ways of
 560         reflecting the results of partial linkage in an output file:
 561         by modifying the output data in place, and by modifying the
 562         relocation record.  Some native formats (e.g., basic a.out and
 563         basic coff) have no way of specifying an addend in the
 564         relocation type, so the addend has to go in the output data.
 565         This is no big deal since in these formats the output data
 566         slot will always be big enough for the addend. Complex reloc
 567         types with addends were invented to solve just this problem.
 568         The @var{error_message} argument is set to an error message if
 569         this return @code{bfd_reloc_dangerous}.
 570
 571 */
 572
 573 bfd_reloc_status_type
 574 bfd_perform_relocation (bfd *abfd,
 575                         arelent *reloc_entry,
 576                         void *data,
 577                         asection *input_section,
 578                         bfd *output_bfd,
 579                         char **error_message)
 580 {
 581   bfd_vma relocation;
 582   bfd_reloc_status_type flag = bfd_reloc_ok;
 583   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 584   bfd_vma output_base = 0;
 585   reloc_howto_type *howto = reloc_entry->howto;
 586   asection *reloc_target_output_section;
 587   asymbol *symbol;
 588
 589   symbol = *(reloc_entry->sym_ptr_ptr);
 590   if (bfd_is_abs_section (symbol->section)
 591       && output_bfd != NULL)
 592     {
 593       reloc_entry->address += input_section->output_offset;
 594       return bfd_reloc_ok;
 595     }
 596
 597   /* If we are not producing relocatable output, return an error if
 598      the symbol is not defined.  An undefined weak symbol is
 599      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 600   if (bfd_is_und_section (symbol->section)
 601       && (symbol->flags & BSF_WEAK) == 0
 602       && output_bfd == NULL)
 603     flag = bfd_reloc_undefined;
 604
 605   /* If there is a function supplied to handle this relocation type,
 606      call it.  It'll return `bfd_reloc_continue' if further processing
 607      can be done.  */
 608   if (howto->special_function)
 609     {
 610       bfd_reloc_status_type cont;
 611       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 612                                       input_section, output_bfd,
 613                                       error_message);
 614       if (cont != bfd_reloc_continue)
 615         return cont;
 616     }
 617
 618   /* Is the address of the relocation really within the section?  */
 619   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 620     return bfd_reloc_outofrange;
 621
 622   /* Work out which section the relocation is targeted at and the
 623      initial relocation command value.  */
 624
 625   /* Get symbol value.  (Common symbols are special.)  */
 626   if (bfd_is_com_section (symbol->section))
 627     relocation = 0;
 628   else
 629     relocation = symbol->value;
 630
 631   reloc_target_output_section = symbol->section->output_section;
 632
 633   /* Convert input-section-relative symbol value to absolute.  */
 634   if ((output_bfd && ! howto->partial_inplace)
 635       || reloc_target_output_section == NULL)
 636     output_base = 0;
 637   else
 638     output_base = reloc_target_output_section->vma;
 639
 640   relocation += output_base + symbol->section->output_offset;
 641
 642   /* Add in supplied addend.  */
 643   relocation += reloc_entry->addend;
 644
 645   /* Here the variable relocation holds the final address of the
 646      symbol we are relocating against, plus any addend.  */
 647
 648   if (howto->pc_relative)
 649     {
 650       /* This is a PC relative relocation.  We want to set RELOCATION
 651          to the distance between the address of the symbol and the
 652          location.  RELOCATION is already the address of the symbol.
 653
 654          We start by subtracting the address of the section containing
 655          the location.
 656
 657          If pcrel_offset is set, we must further subtract the position
 658          of the location within the section.  Some targets arrange for
 659          the addend to be the negative of the position of the location
 660          within the section; for example, i386-aout does this.  For
 661          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 662          include the position of the location; for example, m88kbcs,
 663          or ELF.  For those targets, pcrel_offset is TRUE.
 664
 665          If we are producing relocatable output, then we must ensure
 666          that this reloc will be correctly computed when the final
 667          relocation is done.  If pcrel_offset is FALSE we want to wind
 668          up with the negative of the location within the section,
 669          which means we must adjust the existing addend by the change
 670          in the location within the section.  If pcrel_offset is TRUE
 671          we do not want to adjust the existing addend at all.
 672
 673          FIXME: This seems logical to me, but for the case of
 674          producing relocatable output it is not what the code
 675          actually does.  I don't want to change it, because it seems
 676          far too likely that something will break.  */
 677
 678       relocation -=
 679         input_section->output_section->vma + input_section->output_offset;
 680
 681       if (howto->pcrel_offset)
 682         relocation -= reloc_entry->address;
 683     }
 684
 685   if (output_bfd != NULL)
 686     {
 687       if (! howto->partial_inplace)
 688         {
 689           /* This is a partial relocation, and we want to apply the relocation
 690              to the reloc entry rather than the raw data. Modify the reloc
 691              inplace to reflect what we now know.  */
 692           reloc_entry->addend = relocation;
 693           reloc_entry->address += input_section->output_offset;
 694           return flag;
 695         }
 696       else
 697         {
 698           /* This is a partial relocation, but inplace, so modify the
 699              reloc record a bit.
 700
 701              If we've relocated with a symbol with a section, change
 702              into a ref to the section belonging to the symbol.  */
 703
 704           reloc_entry->address += input_section->output_offset;
 705
 706           /* WTF?? */
 707           if (abfd->xvec->flavour == bfd_target_coff_flavour
 708               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 709               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 710             {
 711               /* For m68k-coff, the addend was being subtracted twice during
 712                  relocation with -r.  Removing the line below this comment
 713                  fixes that problem; see PR 2953.
 714
 715 However, Ian wrote the following, regarding removing the line below,
 716 which explains why it is still enabled:  --djm
 717
 718 If you put a patch like that into BFD you need to check all the COFF
 719 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 720 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 721 problem in a different way.  There may very well be a reason that the
 722 code works as it does.
 723
 724 Hmmm.  The first obvious point is that bfd_perform_relocation should
 725 not have any tests that depend upon the flavour.  It's seem like
 726 entirely the wrong place for such a thing.  The second obvious point
 727 is that the current code ignores the reloc addend when producing
 728 relocatable output for COFF.  That's peculiar.  In fact, I really
 729 have no idea what the point of the line you want to remove is.
 730
 731 A typical COFF reloc subtracts the old value of the symbol and adds in
 732 the new value to the location in the object file (if it's a pc
 733 relative reloc it adds the difference between the symbol value and the
 734 location).  When relocating we need to preserve that property.
 735
 736 BFD handles this by setting the addend to the negative of the old
 737 value of the symbol.  Unfortunately it handles common symbols in a
 738 non-standard way (it doesn't subtract the old value) but that's a
 739 different story (we can't change it without losing backward
 740 compatibility with old object files) (coff-i386 does subtract the old
 741 value, to be compatible with existing coff-i386 targets, like SCO).
 742
 743 So everything works fine when not producing relocatable output.  When
 744 we are producing relocatable output, logically we should do exactly
 745 what we do when not producing relocatable output.  Therefore, your
 746 patch is correct.  In fact, it should probably always just set
 747 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 748 add the value into the object file.  This won't hurt the COFF code,
 749 which doesn't use the addend; I'm not sure what it will do to other
 750 formats (the thing to check for would be whether any formats both use
 751 the addend and set partial_inplace).
 752
 753 When I wanted to make coff-i386 produce relocatable output, I ran
 754 into the problem that you are running into: I wanted to remove that
 755 line.  Rather than risk it, I made the coff-i386 relocs use a special
 756 function; it's coff_i386_reloc in coff-i386.c.  The function
 757 specifically adds the addend field into the object file, knowing that
 758 bfd_perform_relocation is not going to.  If you remove that line, then
 759 coff-i386.c will wind up adding the addend field in twice.  It's
 760 trivial to fix; it just needs to be done.
 761
 762 The problem with removing the line is just that it may break some
 763 working code.  With BFD it's hard to be sure of anything.  The right
 764 way to deal with this is simply to build and test at least all the
 765 supported COFF targets.  It should be straightforward if time and disk
 766 space consuming.  For each target:
 767     1) build the linker
 768     2) generate some executable, and link it using -r (I would
 769        probably use paranoia.o and link against newlib/libc.a, which
 770        for all the supported targets would be available in
 771        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 772     3) make the change to reloc.c
 773     4) rebuild the linker
 774     5) repeat step 2
 775     6) if the resulting object files are the same, you have at least
 776        made it no worse
 777     7) if they are different you have to figure out which version is
 778        right
 779 */
 780               relocation -= reloc_entry->addend;
 781               reloc_entry->addend = 0;
 782             }
 783           else
 784             {
 785               reloc_entry->addend = relocation;
 786             }
 787         }
 788     }
 789   else
 790     {
 791       reloc_entry->addend = 0;
 792     }
 793
 794   /* FIXME: This overflow checking is incomplete, because the value
 795      might have overflowed before we get here.  For a correct check we
 796      need to compute the value in a size larger than bitsize, but we
 797      can't reasonably do that for a reloc the same size as a host
 798      machine word.
 799      FIXME: We should also do overflow checking on the result after
 800      adding in the value contained in the object file.  */
 801   if (howto->complain_on_overflow != complain_overflow_dont
 802       && flag == bfd_reloc_ok)
 803     flag = bfd_check_overflow (howto->complain_on_overflow,
 804                                howto->bitsize,
 805                                howto->rightshift,
 806                                bfd_arch_bits_per_address (abfd),
 807                                relocation);
 808
 809   /* Either we are relocating all the way, or we don't want to apply
 810      the relocation to the reloc entry (probably because there isn't
 811      any room in the output format to describe addends to relocs).  */
 812
 813   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 814      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 815      following program:
 816
 817      struct str
 818      {
 819        unsigned int i0;
 820      } s = { 0 };
 821
 822      int
 823      main ()
 824      {
 825        unsigned long x;
 826
 827        x = 0x100000000;
 828        x <<= (unsigned long) s.i0;
 829        if (x == 0)
 830          printf ("failed\n");
 831        else
 832          printf ("succeeded (%lx)\n", x);
 833      }
 834      */
 835
 836   relocation >>= (bfd_vma) howto->rightshift;
 837
 838   /* Shift everything up to where it's going to be used.  */
 839   relocation <<= (bfd_vma) howto->bitpos;
 840
 841   /* Wait for the day when all have the mask in them.  */
 842
 843   /* What we do:
 844      i instruction to be left alone
 845      o offset within instruction
 846      r relocation offset to apply
 847      S src mask
 848      D dst mask
 849      N ~dst mask
 850      A part 1
 851      B part 2
 852      R result
 853
 854      Do this:
 855      ((  i i i i i o o o o o  from bfd_get<size>
 856      and           S S S S S) to get the size offset we want
 857      +   r r r r r r r r r r) to get the final value to place
 858      and           D D D D D  to chop to right size
 859      -----------------------
 860      =             A A A A A
 861      And this:
 862      (   i i i i i o o o o o  from bfd_get<size>
 863      and N N N N N          ) get instruction
 864      -----------------------
 865      =   B B B B B
 866
 867      And then:
 868      (   B B B B B
 869      or            A A A A A)
 870      -----------------------
 871      =   R R R R R R R R R R  put into bfd_put<size>
 872      */
 873
 874 #define DOIT(x) \
 875   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 876
 877   switch (howto->size)
 878     {
 879     case 0:
 880       {
 881         char x = bfd_get_8 (abfd, (char *) data + octets);
 882         DOIT (x);
 883         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 884       }
 885       break;
 886
 887     case 1:
 888       {
 889         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 890         DOIT (x);
 891         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 892       }
 893       break;
 894     case 2:
 895       {
 896         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 897         DOIT (x);
 898         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 899       }
 900       break;
 901     case -2:
 902       {
 903         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 904         relocation = -relocation;
 905         DOIT (x);
 906         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 907       }
 908       break;
 909
 910     case -1:
 911       {
 912         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 913         relocation = -relocation;
 914         DOIT (x);
 915         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 916       }
 917       break;
 918
 919     case 3:
 920       /* Do nothing */
 921       break;
 922
 923     case 4:
 924 #ifdef BFD64
 925       {
 926         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 927         DOIT (x);
 928         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 929       }
 930 #else
 931       abort ();
 932 #endif
 933       break;
 934     default:
 935       return bfd_reloc_other;
 936     }
 937
 938   return flag;
 939 }
 940
 941 /*
 942 FUNCTION
 943         bfd_install_relocation
 944
 945 SYNOPSIS
 946         bfd_reloc_status_type bfd_install_relocation
 947           (bfd *abfd,
 948            arelent *reloc_entry,
 949            void *data, bfd_vma data_start,
 950            asection *input_section,
 951            char **error_message);
 952
 953 DESCRIPTION
 954         This looks remarkably like <<bfd_perform_relocation>>, except it
 955         does not expect that the section contents have been filled in.
 956         I.e., it's suitable for use when creating, rather than applying
 957         a relocation.
 958
 959         For now, this function should be considered reserved for the
 960         assembler.
 961 */
 962
 963 bfd_reloc_status_type
 964 bfd_install_relocation (bfd *abfd,
 965                         arelent *reloc_entry,
 966                         void *data_start,
 967                         bfd_vma data_start_offset,
 968                         asection *input_section,
 969                         char **error_message)
 970 {
 971   bfd_vma relocation;
 972   bfd_reloc_status_type flag = bfd_reloc_ok;
 973   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 974   bfd_vma output_base = 0;
 975   reloc_howto_type *howto = reloc_entry->howto;
 976   asection *reloc_target_output_section;
 977   asymbol *symbol;
 978   bfd_byte *data;
 979
 980   symbol = *(reloc_entry->sym_ptr_ptr);
 981   if (bfd_is_abs_section (symbol->section))
 982     {
 983       reloc_entry->address += input_section->output_offset;
 984       return bfd_reloc_ok;
 985     }
 986
 987   /* If there is a function supplied to handle this relocation type,
 988      call it.  It'll return `bfd_reloc_continue' if further processing
 989      can be done.  */
 990   if (howto->special_function)
 991     {
 992       bfd_reloc_status_type cont;
 993
 994       /* XXX - The special_function calls haven't been fixed up to deal
 995          with creating new relocations and section contents.  */
 996       cont = howto->special_function (abfd, reloc_entry, symbol,
 997                                       /* XXX - Non-portable! */
 998                                       ((bfd_byte *) data_start
 999                                        - data_start_offset),
1000                                       input_section, abfd, error_message);
1001       if (cont != bfd_reloc_continue)
1002         return cont;
1003     }
1004
1005   /* Is the address of the relocation really within the section?  */
1006   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1007     return bfd_reloc_outofrange;
1008
1009   /* Work out which section the relocation is targeted at and the
1010      initial relocation command value.  */
1011
1012   /* Get symbol value.  (Common symbols are special.)  */
1013   if (bfd_is_com_section (symbol->section))
1014     relocation = 0;
1015   else
1016     relocation = symbol->value;
1017
1018   reloc_target_output_section = symbol->section->output_section;
1019
1020   /* Convert input-section-relative symbol value to absolute.  */
1021   if (! howto->partial_inplace)
1022     output_base = 0;
1023   else
1024     output_base = reloc_target_output_section->vma;
1025
1026   relocation += output_base + symbol->section->output_offset;
1027
1028   /* Add in supplied addend.  */
1029   relocation += reloc_entry->addend;
1030
1031   /* Here the variable relocation holds the final address of the
1032      symbol we are relocating against, plus any addend.  */
1033
1034   if (howto->pc_relative)
1035     {
1036       /* This is a PC relative relocation.  We want to set RELOCATION
1037          to the distance between the address of the symbol and the
1038          location.  RELOCATION is already the address of the symbol.
1039
1040          We start by subtracting the address of the section containing
1041          the location.
1042
1043          If pcrel_offset is set, we must further subtract the position
1044          of the location within the section.  Some targets arrange for
1045          the addend to be the negative of the position of the location
1046          within the section; for example, i386-aout does this.  For
1047          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1048          include the position of the location; for example, m88kbcs,
1049          or ELF.  For those targets, pcrel_offset is TRUE.
1050
1051          If we are producing relocatable output, then we must ensure
1052          that this reloc will be correctly computed when the final
1053          relocation is done.  If pcrel_offset is FALSE we want to wind
1054          up with the negative of the location within the section,
1055          which means we must adjust the existing addend by the change
1056          in the location within the section.  If pcrel_offset is TRUE
1057          we do not want to adjust the existing addend at all.
1058
1059          FIXME: This seems logical to me, but for the case of
1060          producing relocatable output it is not what the code
1061          actually does.  I don't want to change it, because it seems
1062          far too likely that something will break.  */
1063
1064       relocation -=
1065         input_section->output_section->vma + input_section->output_offset;
1066
1067       if (howto->pcrel_offset && howto->partial_inplace)
1068         relocation -= reloc_entry->address;
1069     }
1070
1071   if (! howto->partial_inplace)
1072     {
1073       /* This is a partial relocation, and we want to apply the relocation
1074          to the reloc entry rather than the raw data. Modify the reloc
1075          inplace to reflect what we now know.  */
1076       reloc_entry->addend = relocation;
1077       reloc_entry->address += input_section->output_offset;
1078       return flag;
1079     }
1080   else
1081     {
1082       /* This is a partial relocation, but inplace, so modify the
1083          reloc record a bit.
1084
1085          If we've relocated with a symbol with a section, change
1086          into a ref to the section belonging to the symbol.  */
1087       reloc_entry->address += input_section->output_offset;
1088
1089       /* WTF?? */
1090       if (abfd->xvec->flavour == bfd_target_coff_flavour
1091           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1092           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1093         {
1094
1095           /* For m68k-coff, the addend was being subtracted twice during
1096              relocation with -r.  Removing the line below this comment
1097              fixes that problem; see PR 2953.
1098
1099 However, Ian wrote the following, regarding removing the line below,
1100 which explains why it is still enabled:  --djm
1101
1102 If you put a patch like that into BFD you need to check all the COFF
1103 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1104 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1105 problem in a different way.  There may very well be a reason that the
1106 code works as it does.
1107
1108 Hmmm.  The first obvious point is that bfd_install_relocation should
1109 not have any tests that depend upon the flavour.  It's seem like
1110 entirely the wrong place for such a thing.  The second obvious point
1111 is that the current code ignores the reloc addend when producing
1112 relocatable output for COFF.  That's peculiar.  In fact, I really
1113 have no idea what the point of the line you want to remove is.
1114
1115 A typical COFF reloc subtracts the old value of the symbol and adds in
1116 the new value to the location in the object file (if it's a pc
1117 relative reloc it adds the difference between the symbol value and the
1118 location).  When relocating we need to preserve that property.
1119
1120 BFD handles this by setting the addend to the negative of the old
1121 value of the symbol.  Unfortunately it handles common symbols in a
1122 non-standard way (it doesn't subtract the old value) but that's a
1123 different story (we can't change it without losing backward
1124 compatibility with old object files) (coff-i386 does subtract the old
1125 value, to be compatible with existing coff-i386 targets, like SCO).
1126
1127 So everything works fine when not producing relocatable output.  When
1128 we are producing relocatable output, logically we should do exactly
1129 what we do when not producing relocatable output.  Therefore, your
1130 patch is correct.  In fact, it should probably always just set
1131 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1132 add the value into the object file.  This won't hurt the COFF code,
1133 which doesn't use the addend; I'm not sure what it will do to other
1134 formats (the thing to check for would be whether any formats both use
1135 the addend and set partial_inplace).
1136
1137 When I wanted to make coff-i386 produce relocatable output, I ran
1138 into the problem that you are running into: I wanted to remove that
1139 line.  Rather than risk it, I made the coff-i386 relocs use a special
1140 function; it's coff_i386_reloc in coff-i386.c.  The function
1141 specifically adds the addend field into the object file, knowing that
1142 bfd_install_relocation is not going to.  If you remove that line, then
1143 coff-i386.c will wind up adding the addend field in twice.  It's
1144 trivial to fix; it just needs to be done.
1145
1146 The problem with removing the line is just that it may break some
1147 working code.  With BFD it's hard to be sure of anything.  The right
1148 way to deal with this is simply to build and test at least all the
1149 supported COFF targets.  It should be straightforward if time and disk
1150 space consuming.  For each target:
1151     1) build the linker
1152     2) generate some executable, and link it using -r (I would
1153        probably use paranoia.o and link against newlib/libc.a, which
1154        for all the supported targets would be available in
1155        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1156     3) make the change to reloc.c
1157     4) rebuild the linker
1158     5) repeat step 2
1159     6) if the resulting object files are the same, you have at least
1160        made it no worse
1161     7) if they are different you have to figure out which version is
1162        right.  */
1163           relocation -= reloc_entry->addend;
1164           /* FIXME: There should be no target specific code here...  */
1165           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1166             reloc_entry->addend = 0;
1167         }
1168       else
1169         {
1170           reloc_entry->addend = relocation;
1171         }
1172     }
1173
1174   /* FIXME: This overflow checking is incomplete, because the value
1175      might have overflowed before we get here.  For a correct check we
1176      need to compute the value in a size larger than bitsize, but we
1177      can't reasonably do that for a reloc the same size as a host
1178      machine word.
1179      FIXME: We should also do overflow checking on the result after
1180      adding in the value contained in the object file.  */
1181   if (howto->complain_on_overflow != complain_overflow_dont)
1182     flag = bfd_check_overflow (howto->complain_on_overflow,
1183                                howto->bitsize,
1184                                howto->rightshift,
1185                                bfd_arch_bits_per_address (abfd),
1186                                relocation);
1187
1188   /* Either we are relocating all the way, or we don't want to apply
1189      the relocation to the reloc entry (probably because there isn't
1190      any room in the output format to describe addends to relocs).  */
1191
1192   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1193      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1194      following program:
1195
1196      struct str
1197      {
1198        unsigned int i0;
1199      } s = { 0 };
1200
1201      int
1202      main ()
1203      {
1204        unsigned long x;
1205
1206        x = 0x100000000;
1207        x <<= (unsigned long) s.i0;
1208        if (x == 0)
1209          printf ("failed\n");
1210        else
1211          printf ("succeeded (%lx)\n", x);
1212      }
1213      */
1214
1215   relocation >>= (bfd_vma) howto->rightshift;
1216
1217   /* Shift everything up to where it's going to be used.  */
1218   relocation <<= (bfd_vma) howto->bitpos;
1219
1220   /* Wait for the day when all have the mask in them.  */
1221
1222   /* What we do:
1223      i instruction to be left alone
1224      o offset within instruction
1225      r relocation offset to apply
1226      S src mask
1227      D dst mask
1228      N ~dst mask
1229      A part 1
1230      B part 2
1231      R result
1232
1233      Do this:
1234      ((  i i i i i o o o o o  from bfd_get<size>
1235      and           S S S S S) to get the size offset we want
1236      +   r r r r r r r r r r) to get the final value to place
1237      and           D D D D D  to chop to right size
1238      -----------------------
1239      =             A A A A A
1240      And this:
1241      (   i i i i i o o o o o  from bfd_get<size>
1242      and N N N N N          ) get instruction
1243      -----------------------
1244      =   B B B B B
1245
1246      And then:
1247      (   B B B B B
1248      or            A A A A A)
1249      -----------------------
1250      =   R R R R R R R R R R  put into bfd_put<size>
1251      */
1252
1253 #define DOIT(x) \
1254   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1255
1256   data = (bfd_byte *) data_start + (octets - data_start_offset);
1257
1258   switch (howto->size)
1259     {
1260     case 0:
1261       {
1262         char x = bfd_get_8 (abfd, data);
1263         DOIT (x);
1264         bfd_put_8 (abfd, x, data);
1265       }
1266       break;
1267
1268     case 1:
1269       {
1270         short x = bfd_get_16 (abfd, data);
1271         DOIT (x);
1272         bfd_put_16 (abfd, (bfd_vma) x, data);
1273       }
1274       break;
1275     case 2:
1276       {
1277         long x = bfd_get_32 (abfd, data);
1278         DOIT (x);
1279         bfd_put_32 (abfd, (bfd_vma) x, data);
1280       }
1281       break;
1282     case -2:
1283       {
1284         long x = bfd_get_32 (abfd, data);
1285         relocation = -relocation;
1286         DOIT (x);
1287         bfd_put_32 (abfd, (bfd_vma) x, data);
1288       }
1289       break;
1290
1291     case 3:
1292       /* Do nothing */
1293       break;
1294
1295     case 4:
1296       {
1297         bfd_vma x = bfd_get_64 (abfd, data);
1298         DOIT (x);
1299         bfd_put_64 (abfd, x, data);
1300       }
1301       break;
1302     default:
1303       return bfd_reloc_other;
1304     }
1305
1306   return flag;
1307 }
1308
1309 /* This relocation routine is used by some of the backend linkers.
1310    They do not construct asymbol or arelent structures, so there is no
1311    reason for them to use bfd_perform_relocation.  Also,
1312    bfd_perform_relocation is so hacked up it is easier to write a new
1313    function than to try to deal with it.
1314
1315    This routine does a final relocation.  Whether it is useful for a
1316    relocatable link depends upon how the object format defines
1317    relocations.
1318
1319    FIXME: This routine ignores any special_function in the HOWTO,
1320    since the existing special_function values have been written for
1321    bfd_perform_relocation.
1322
1323    HOWTO is the reloc howto information.
1324    INPUT_BFD is the BFD which the reloc applies to.
1325    INPUT_SECTION is the section which the reloc applies to.
1326    CONTENTS is the contents of the section.
1327    ADDRESS is the address of the reloc within INPUT_SECTION.
1328    VALUE is the value of the symbol the reloc refers to.
1329    ADDEND is the addend of the reloc.  */
1330
1331 bfd_reloc_status_type
1332 _bfd_final_link_relocate (reloc_howto_type *howto,
1333                           bfd *input_bfd,
1334                           asection *input_section,
1335                           bfd_byte *contents,
1336                           bfd_vma address,
1337                           bfd_vma value,
1338                           bfd_vma addend)
1339 {
1340   bfd_vma relocation;
1341
1342   /* Sanity check the address.  */
1343   if (address > bfd_get_section_limit (input_bfd, input_section))
1344     return bfd_reloc_outofrange;
1345
1346   /* This function assumes that we are dealing with a basic relocation
1347      against a symbol.  We want to compute the value of the symbol to
1348      relocate to.  This is just VALUE, the value of the symbol, plus
1349      ADDEND, any addend associated with the reloc.  */
1350   relocation = value + addend;
1351
1352   /* If the relocation is PC relative, we want to set RELOCATION to
1353      the distance between the symbol (currently in RELOCATION) and the
1354      location we are relocating.  Some targets (e.g., i386-aout)
1355      arrange for the contents of the section to be the negative of the
1356      offset of the location within the section; for such targets
1357      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1358      simply leave the contents of the section as zero; for such
1359      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1360      need to subtract out the offset of the location within the
1361      section (which is just ADDRESS).  */
1362   if (howto->pc_relative)
1363     {
1364       relocation -= (input_section->output_section->vma
1365                      + input_section->output_offset);
1366       if (howto->pcrel_offset)
1367         relocation -= address;
1368     }
1369
1370   return _bfd_relocate_contents (howto, input_bfd, relocation,
1371                                  contents + address);
1372 }
1373
1374 /* Relocate a given location using a given value and howto.  */
1375
1376 bfd_reloc_status_type
1377 _bfd_relocate_contents (reloc_howto_type *howto,
1378                         bfd *input_bfd,
1379                         bfd_vma relocation,
1380                         bfd_byte *location)
1381 {
1382   int size;
1383   bfd_vma x = 0;
1384   bfd_reloc_status_type flag;
1385   unsigned int rightshift = howto->rightshift;
1386   unsigned int bitpos = howto->bitpos;
1387
1388   /* If the size is negative, negate RELOCATION.  This isn't very
1389      general.  */
1390   if (howto->size < 0)
1391     relocation = -relocation;
1392
1393   /* Get the value we are going to relocate.  */
1394   size = bfd_get_reloc_size (howto);
1395   switch (size)
1396     {
1397     default:
1398     case 0:
1399       abort ();
1400     case 1:
1401       x = bfd_get_8 (input_bfd, location);
1402       break;
1403     case 2:
1404       x = bfd_get_16 (input_bfd, location);
1405       break;
1406     case 4:
1407       x = bfd_get_32 (input_bfd, location);
1408       break;
1409     case 8:
1410 #ifdef BFD64
1411       x = bfd_get_64 (input_bfd, location);
1412 #else
1413       abort ();
1414 #endif
1415       break;
1416     }
1417
1418   /* Check for overflow.  FIXME: We may drop bits during the addition
1419      which we don't check for.  We must either check at every single
1420      operation, which would be tedious, or we must do the computations
1421      in a type larger than bfd_vma, which would be inefficient.  */
1422   flag = bfd_reloc_ok;
1423   if (howto->complain_on_overflow != complain_overflow_dont)
1424     {
1425       bfd_vma addrmask, fieldmask, signmask, ss;
1426       bfd_vma a, b, sum;
1427
1428       /* Get the values to be added together.  For signed and unsigned
1429          relocations, we assume that all values should be truncated to
1430          the size of an address.  For bitfields, all the bits matter.
1431          See also bfd_check_overflow.  */
1432       fieldmask = N_ONES (howto->bitsize);
1433       signmask = ~fieldmask;
1434       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1435                   | (fieldmask << rightshift));
1436       a = (relocation & addrmask) >> rightshift;
1437       b = (x & howto->src_mask & addrmask) >> bitpos;
1438       addrmask >>= rightshift;
1439
1440       switch (howto->complain_on_overflow)
1441         {
1442         case complain_overflow_signed:
1443           /* If any sign bits are set, all sign bits must be set.
1444              That is, A must be a valid negative address after
1445              shifting.  */
1446           signmask = ~(fieldmask >> 1);
1447           /* Fall thru */
1448
1449         case complain_overflow_bitfield:
1450           /* Much like the signed check, but for a field one bit
1451              wider.  We allow a bitfield to represent numbers in the
1452              range -2**n to 2**n-1, where n is the number of bits in the
1453              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1454              can't overflow, which is exactly what we want.  */
1455           ss = a & signmask;
1456           if (ss != 0 && ss != (addrmask & signmask))
1457             flag = bfd_reloc_overflow;
1458
1459           /* We only need this next bit of code if the sign bit of B
1460              is below the sign bit of A.  This would only happen if
1461              SRC_MASK had fewer bits than BITSIZE.  Note that if
1462              SRC_MASK has more bits than BITSIZE, we can get into
1463              trouble; we would need to verify that B is in range, as
1464              we do for A above.  */
1465           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1466           ss >>= bitpos;
1467
1468           /* Set all the bits above the sign bit.  */
1469           b = (b ^ ss) - ss;
1470
1471           /* Now we can do the addition.  */
1472           sum = a + b;
1473
1474           /* See if the result has the correct sign.  Bits above the
1475              sign bit are junk now; ignore them.  If the sum is
1476              positive, make sure we did not have all negative inputs;
1477              if the sum is negative, make sure we did not have all
1478              positive inputs.  The test below looks only at the sign
1479              bits, and it really just
1480                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1481
1482              We mask with addrmask here to explicitly allow an address
1483              wrap-around.  The Linux kernel relies on it, and it is
1484              the only way to write assembler code which can run when
1485              loaded at a location 0x80000000 away from the location at
1486              which it is linked.  */
1487           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1488             flag = bfd_reloc_overflow;
1489           break;
1490
1491         case complain_overflow_unsigned:
1492           /* Checking for an unsigned overflow is relatively easy:
1493              trim the addresses and add, and trim the result as well.
1494              Overflow is normally indicated when the result does not
1495              fit in the field.  However, we also need to consider the
1496              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1497              input is 0x80000000, and bfd_vma is only 32 bits; then we
1498              will get sum == 0, but there is an overflow, since the
1499              inputs did not fit in the field.  Instead of doing a
1500              separate test, we can check for this by or-ing in the
1501              operands when testing for the sum overflowing its final
1502              field.  */
1503           sum = (a + b) & addrmask;
1504           if ((a | b | sum) & signmask)
1505             flag = bfd_reloc_overflow;
1506           break;
1507
1508         default:
1509           abort ();
1510         }
1511     }
1512
1513   /* Put RELOCATION in the right bits.  */
1514   relocation >>= (bfd_vma) rightshift;
1515   relocation <<= (bfd_vma) bitpos;
1516
1517   /* Add RELOCATION to the right bits of X.  */
1518   x = ((x & ~howto->dst_mask)
1519        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1520
1521   /* Put the relocated value back in the object file.  */
1522   switch (size)
1523     {
1524     default:
1525       abort ();
1526     case 1:
1527       bfd_put_8 (input_bfd, x, location);
1528       break;
1529     case 2:
1530       bfd_put_16 (input_bfd, x, location);
1531       break;
1532     case 4:
1533       bfd_put_32 (input_bfd, x, location);
1534       break;
1535     case 8:
1536 #ifdef BFD64
1537       bfd_put_64 (input_bfd, x, location);
1538 #else
1539       abort ();
1540 #endif
1541       break;
1542     }
1543
1544   return flag;
1545 }
1546
1547 /* Clear a given location using a given howto, by applying a fixed relocation
1548    value and discarding any in-place addend.  This is used for fixed-up
1549    relocations against discarded symbols, to make ignorable debug or unwind
1550    information more obvious.  */
1551
1552 void
1553 _bfd_clear_contents (reloc_howto_type *howto,
1554                      bfd *input_bfd,
1555                      asection *input_section,
1556                      bfd_byte *location)
1557 {
1558   int size;
1559   bfd_vma x = 0;
1560
1561   /* Get the value we are going to relocate.  */
1562   size = bfd_get_reloc_size (howto);
1563   switch (size)
1564     {
1565     default:
1566     case 0:
1567       abort ();
1568     case 1:
1569       x = bfd_get_8 (input_bfd, location);
1570       break;
1571     case 2:
1572       x = bfd_get_16 (input_bfd, location);
1573       break;
1574     case 4:
1575       x = bfd_get_32 (input_bfd, location);
1576       break;
1577     case 8:
1578 #ifdef BFD64
1579       x = bfd_get_64 (input_bfd, location);
1580 #else
1581       abort ();
1582 #endif
1583       break;
1584     }
1585
1586   /* Zero out the unwanted bits of X.  */
1587   x &= ~howto->dst_mask;
1588
1589   /* For a range list, use 1 instead of 0 as placeholder.  0
1590      would terminate the list, hiding any later entries.  */
1591   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1592               ".debug_ranges") == 0
1593       && (howto->dst_mask & 1) != 0)
1594     x |= 1;
1595
1596   /* Put the relocated value back in the object file.  */
1597   switch (size)
1598     {
1599     default:
1600     case 0:
1601       abort ();
1602     case 1:
1603       bfd_put_8 (input_bfd, x, location);
1604       break;
1605     case 2:
1606       bfd_put_16 (input_bfd, x, location);
1607       break;
1608     case 4:
1609       bfd_put_32 (input_bfd, x, location);
1610       break;
1611     case 8:
1612 #ifdef BFD64
1613       bfd_put_64 (input_bfd, x, location);
1614 #else
1615       abort ();
1616 #endif
1617       break;
1618     }
1619 }
1620
1621 /*
1622 DOCDD
1623 INODE
1624         howto manager,  , typedef arelent, Relocations
1625
1626 SUBSECTION
1627         The howto manager
1628
1629         When an application wants to create a relocation, but doesn't
1630         know what the target machine might call it, it can find out by
1631         using this bit of code.
1632
1633 */
1634
1635 /*
1636 TYPEDEF
1637         bfd_reloc_code_type
1638
1639 DESCRIPTION
1640         The insides of a reloc code.  The idea is that, eventually, there
1641         will be one enumerator for every type of relocation we ever do.
1642         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1643         return a howto pointer.
1644
1645         This does mean that the application must determine the correct
1646         enumerator value; you can't get a howto pointer from a random set
1647         of attributes.
1648
1649 SENUM
1650    bfd_reloc_code_real
1651
1652 ENUM
1653   BFD_RELOC_64
1654 ENUMX
1655   BFD_RELOC_32
1656 ENUMX
1657   BFD_RELOC_26
1658 ENUMX
1659   BFD_RELOC_24
1660 ENUMX
1661   BFD_RELOC_16
1662 ENUMX
1663   BFD_RELOC_14
1664 ENUMX
1665   BFD_RELOC_8
1666 ENUMDOC
1667   Basic absolute relocations of N bits.
1668
1669 ENUM
1670   BFD_RELOC_64_PCREL
1671 ENUMX
1672   BFD_RELOC_32_PCREL
1673 ENUMX
1674   BFD_RELOC_24_PCREL
1675 ENUMX
1676   BFD_RELOC_16_PCREL
1677 ENUMX
1678   BFD_RELOC_12_PCREL
1679 ENUMX
1680   BFD_RELOC_8_PCREL
1681 ENUMDOC
1682   PC-relative relocations.  Sometimes these are relative to the address
1683 of the relocation itself; sometimes they are relative to the start of
1684 the section containing the relocation.  It depends on the specific target.
1685
1686 The 24-bit relocation is used in some Intel 960 configurations.
1687
1688 ENUM
1689   BFD_RELOC_32_SECREL
1690 ENUMDOC
1691   Section relative relocations.  Some targets need this for DWARF2.
1692
1693 ENUM
1694   BFD_RELOC_32_GOT_PCREL
1695 ENUMX
1696   BFD_RELOC_16_GOT_PCREL
1697 ENUMX
1698   BFD_RELOC_8_GOT_PCREL
1699 ENUMX
1700   BFD_RELOC_32_GOTOFF
1701 ENUMX
1702   BFD_RELOC_16_GOTOFF
1703 ENUMX
1704   BFD_RELOC_LO16_GOTOFF
1705 ENUMX
1706   BFD_RELOC_HI16_GOTOFF
1707 ENUMX
1708   BFD_RELOC_HI16_S_GOTOFF
1709 ENUMX
1710   BFD_RELOC_8_GOTOFF
1711 ENUMX
1712   BFD_RELOC_64_PLT_PCREL
1713 ENUMX
1714   BFD_RELOC_32_PLT_PCREL
1715 ENUMX
1716   BFD_RELOC_24_PLT_PCREL
1717 ENUMX
1718   BFD_RELOC_16_PLT_PCREL
1719 ENUMX
1720   BFD_RELOC_8_PLT_PCREL
1721 ENUMX
1722   BFD_RELOC_64_PLTOFF
1723 ENUMX
1724   BFD_RELOC_32_PLTOFF
1725 ENUMX
1726   BFD_RELOC_16_PLTOFF
1727 ENUMX
1728   BFD_RELOC_LO16_PLTOFF
1729 ENUMX
1730   BFD_RELOC_HI16_PLTOFF
1731 ENUMX
1732   BFD_RELOC_HI16_S_PLTOFF
1733 ENUMX
1734   BFD_RELOC_8_PLTOFF
1735 ENUMDOC
1736   For ELF.
1737
1738 ENUM
1739   BFD_RELOC_68K_GLOB_DAT
1740 ENUMX
1741   BFD_RELOC_68K_JMP_SLOT
1742 ENUMX
1743   BFD_RELOC_68K_RELATIVE
1744 ENUMX
1745   BFD_RELOC_68K_TLS_GD32
1746 ENUMX
1747   BFD_RELOC_68K_TLS_GD16
1748 ENUMX
1749   BFD_RELOC_68K_TLS_GD8
1750 ENUMX
1751   BFD_RELOC_68K_TLS_LDM32
1752 ENUMX
1753   BFD_RELOC_68K_TLS_LDM16
1754 ENUMX
1755   BFD_RELOC_68K_TLS_LDM8
1756 ENUMX
1757   BFD_RELOC_68K_TLS_LDO32
1758 ENUMX
1759   BFD_RELOC_68K_TLS_LDO16
1760 ENUMX
1761   BFD_RELOC_68K_TLS_LDO8
1762 ENUMX
1763   BFD_RELOC_68K_TLS_IE32
1764 ENUMX
1765   BFD_RELOC_68K_TLS_IE16
1766 ENUMX
1767   BFD_RELOC_68K_TLS_IE8
1768 ENUMX
1769   BFD_RELOC_68K_TLS_LE32
1770 ENUMX
1771   BFD_RELOC_68K_TLS_LE16
1772 ENUMX
1773   BFD_RELOC_68K_TLS_LE8
1774 ENUMDOC
1775   Relocations used by 68K ELF.
1776
1777 ENUM
1778   BFD_RELOC_32_BASEREL
1779 ENUMX
1780   BFD_RELOC_16_BASEREL
1781 ENUMX
1782   BFD_RELOC_LO16_BASEREL
1783 ENUMX
1784   BFD_RELOC_HI16_BASEREL
1785 ENUMX
1786   BFD_RELOC_HI16_S_BASEREL
1787 ENUMX
1788   BFD_RELOC_8_BASEREL
1789 ENUMX
1790   BFD_RELOC_RVA
1791 ENUMDOC
1792   Linkage-table relative.
1793
1794 ENUM
1795   BFD_RELOC_8_FFnn
1796 ENUMDOC
1797   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1798
1799 ENUM
1800   BFD_RELOC_32_PCREL_S2
1801 ENUMX
1802   BFD_RELOC_16_PCREL_S2
1803 ENUMX
1804   BFD_RELOC_23_PCREL_S2
1805 ENUMDOC
1806   These PC-relative relocations are stored as word displacements --
1807 i.e., byte displacements shifted right two bits.  The 30-bit word
1808 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1809 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1810 signed 16-bit displacement is used on the MIPS, and the 23-bit
1811 displacement is used on the Alpha.
1812
1813 ENUM
1814   BFD_RELOC_HI22
1815 ENUMX
1816   BFD_RELOC_LO10
1817 ENUMDOC
1818   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1819 the target word.  These are used on the SPARC.
1820
1821 ENUM
1822   BFD_RELOC_GPREL16
1823 ENUMX
1824   BFD_RELOC_GPREL32
1825 ENUMDOC
1826   For systems that allocate a Global Pointer register, these are
1827 displacements off that register.  These relocation types are
1828 handled specially, because the value the register will have is
1829 decided relatively late.
1830
1831 ENUM
1832   BFD_RELOC_I960_CALLJ
1833 ENUMDOC
1834   Reloc types used for i960/b.out.
1835
1836 ENUM
1837   BFD_RELOC_NONE
1838 ENUMX
1839   BFD_RELOC_SPARC_WDISP22
1840 ENUMX
1841   BFD_RELOC_SPARC22
1842 ENUMX
1843   BFD_RELOC_SPARC13
1844 ENUMX
1845   BFD_RELOC_SPARC_GOT10
1846 ENUMX
1847   BFD_RELOC_SPARC_GOT13
1848 ENUMX
1849   BFD_RELOC_SPARC_GOT22
1850 ENUMX
1851   BFD_RELOC_SPARC_PC10
1852 ENUMX
1853   BFD_RELOC_SPARC_PC22
1854 ENUMX
1855   BFD_RELOC_SPARC_WPLT30
1856 ENUMX
1857   BFD_RELOC_SPARC_COPY
1858 ENUMX
1859   BFD_RELOC_SPARC_GLOB_DAT
1860 ENUMX
1861   BFD_RELOC_SPARC_JMP_SLOT
1862 ENUMX
1863   BFD_RELOC_SPARC_RELATIVE
1864 ENUMX
1865   BFD_RELOC_SPARC_UA16
1866 ENUMX
1867   BFD_RELOC_SPARC_UA32
1868 ENUMX
1869   BFD_RELOC_SPARC_UA64
1870 ENUMX
1871   BFD_RELOC_SPARC_GOTDATA_HIX22
1872 ENUMX
1873   BFD_RELOC_SPARC_GOTDATA_LOX10
1874 ENUMX
1875   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1876 ENUMX
1877   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1878 ENUMX
1879   BFD_RELOC_SPARC_GOTDATA_OP
1880 ENUMX
1881   BFD_RELOC_SPARC_JMP_IREL
1882 ENUMX
1883   BFD_RELOC_SPARC_IRELATIVE
1884 ENUMDOC
1885   SPARC ELF relocations.  There is probably some overlap with other
1886   relocation types already defined.
1887
1888 ENUM
1889   BFD_RELOC_SPARC_BASE13
1890 ENUMX
1891   BFD_RELOC_SPARC_BASE22
1892 ENUMDOC
1893   I think these are specific to SPARC a.out (e.g., Sun 4).
1894
1895 ENUMEQ
1896   BFD_RELOC_SPARC_64
1897   BFD_RELOC_64
1898 ENUMX
1899   BFD_RELOC_SPARC_10
1900 ENUMX
1901   BFD_RELOC_SPARC_11
1902 ENUMX
1903   BFD_RELOC_SPARC_OLO10
1904 ENUMX
1905   BFD_RELOC_SPARC_HH22
1906 ENUMX
1907   BFD_RELOC_SPARC_HM10
1908 ENUMX
1909   BFD_RELOC_SPARC_LM22
1910 ENUMX
1911   BFD_RELOC_SPARC_PC_HH22
1912 ENUMX
1913   BFD_RELOC_SPARC_PC_HM10
1914 ENUMX
1915   BFD_RELOC_SPARC_PC_LM22
1916 ENUMX
1917   BFD_RELOC_SPARC_WDISP16
1918 ENUMX
1919   BFD_RELOC_SPARC_WDISP19
1920 ENUMX
1921   BFD_RELOC_SPARC_7
1922 ENUMX
1923   BFD_RELOC_SPARC_6
1924 ENUMX
1925   BFD_RELOC_SPARC_5
1926 ENUMEQX
1927   BFD_RELOC_SPARC_DISP64
1928   BFD_RELOC_64_PCREL
1929 ENUMX
1930   BFD_RELOC_SPARC_PLT32
1931 ENUMX
1932   BFD_RELOC_SPARC_PLT64
1933 ENUMX
1934   BFD_RELOC_SPARC_HIX22
1935 ENUMX
1936   BFD_RELOC_SPARC_LOX10
1937 ENUMX
1938   BFD_RELOC_SPARC_H44
1939 ENUMX
1940   BFD_RELOC_SPARC_M44
1941 ENUMX
1942   BFD_RELOC_SPARC_L44
1943 ENUMX
1944   BFD_RELOC_SPARC_REGISTER
1945 ENUMDOC
1946   SPARC64 relocations
1947
1948 ENUM
1949   BFD_RELOC_SPARC_REV32
1950 ENUMDOC
1951   SPARC little endian relocation
1952 ENUM
1953   BFD_RELOC_SPARC_TLS_GD_HI22
1954 ENUMX
1955   BFD_RELOC_SPARC_TLS_GD_LO10
1956 ENUMX
1957   BFD_RELOC_SPARC_TLS_GD_ADD
1958 ENUMX
1959   BFD_RELOC_SPARC_TLS_GD_CALL
1960 ENUMX
1961   BFD_RELOC_SPARC_TLS_LDM_HI22
1962 ENUMX
1963   BFD_RELOC_SPARC_TLS_LDM_LO10
1964 ENUMX
1965   BFD_RELOC_SPARC_TLS_LDM_ADD
1966 ENUMX
1967   BFD_RELOC_SPARC_TLS_LDM_CALL
1968 ENUMX
1969   BFD_RELOC_SPARC_TLS_LDO_HIX22
1970 ENUMX
1971   BFD_RELOC_SPARC_TLS_LDO_LOX10
1972 ENUMX
1973   BFD_RELOC_SPARC_TLS_LDO_ADD
1974 ENUMX
1975   BFD_RELOC_SPARC_TLS_IE_HI22
1976 ENUMX
1977   BFD_RELOC_SPARC_TLS_IE_LO10
1978 ENUMX
1979   BFD_RELOC_SPARC_TLS_IE_LD
1980 ENUMX
1981   BFD_RELOC_SPARC_TLS_IE_LDX
1982 ENUMX
1983   BFD_RELOC_SPARC_TLS_IE_ADD
1984 ENUMX
1985   BFD_RELOC_SPARC_TLS_LE_HIX22
1986 ENUMX
1987   BFD_RELOC_SPARC_TLS_LE_LOX10
1988 ENUMX
1989   BFD_RELOC_SPARC_TLS_DTPMOD32
1990 ENUMX
1991   BFD_RELOC_SPARC_TLS_DTPMOD64
1992 ENUMX
1993   BFD_RELOC_SPARC_TLS_DTPOFF32
1994 ENUMX
1995   BFD_RELOC_SPARC_TLS_DTPOFF64
1996 ENUMX
1997   BFD_RELOC_SPARC_TLS_TPOFF32
1998 ENUMX
1999   BFD_RELOC_SPARC_TLS_TPOFF64
2000 ENUMDOC
2001   SPARC TLS relocations
2002
2003 ENUM
2004   BFD_RELOC_SPU_IMM7
2005 ENUMX
2006   BFD_RELOC_SPU_IMM8
2007 ENUMX
2008   BFD_RELOC_SPU_IMM10
2009 ENUMX
2010   BFD_RELOC_SPU_IMM10W
2011 ENUMX
2012   BFD_RELOC_SPU_IMM16
2013 ENUMX
2014   BFD_RELOC_SPU_IMM16W
2015 ENUMX
2016   BFD_RELOC_SPU_IMM18
2017 ENUMX
2018   BFD_RELOC_SPU_PCREL9a
2019 ENUMX
2020   BFD_RELOC_SPU_PCREL9b
2021 ENUMX
2022   BFD_RELOC_SPU_PCREL16
2023 ENUMX
2024   BFD_RELOC_SPU_LO16
2025 ENUMX
2026   BFD_RELOC_SPU_HI16
2027 ENUMX
2028   BFD_RELOC_SPU_PPU32
2029 ENUMX
2030   BFD_RELOC_SPU_PPU64
2031 ENUMX
2032   BFD_RELOC_SPU_ADD_PIC
2033 ENUMDOC
2034   SPU Relocations.
2035
2036 ENUM
2037   BFD_RELOC_ALPHA_GPDISP_HI16
2038 ENUMDOC
2039   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2040      "addend" in some special way.
2041   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2042      writing; when reading, it will be the absolute section symbol.  The
2043      addend is the displacement in bytes of the "lda" instruction from
2044      the "ldah" instruction (which is at the address of this reloc).
2045 ENUM
2046   BFD_RELOC_ALPHA_GPDISP_LO16
2047 ENUMDOC
2048   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2049      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2050      relocations out, and is filled in with the file's GP value on
2051      reading, for convenience.
2052
2053 ENUM
2054   BFD_RELOC_ALPHA_GPDISP
2055 ENUMDOC
2056   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2057      relocation except that there is no accompanying GPDISP_LO16
2058      relocation.
2059
2060 ENUM
2061   BFD_RELOC_ALPHA_LITERAL
2062 ENUMX
2063   BFD_RELOC_ALPHA_ELF_LITERAL
2064 ENUMX
2065   BFD_RELOC_ALPHA_LITUSE
2066 ENUMDOC
2067   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2068      the assembler turns it into a LDQ instruction to load the address of
2069      the symbol, and then fills in a register in the real instruction.
2070
2071      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2072      section symbol.  The addend is ignored when writing, but is filled
2073      in with the file's GP value on reading, for convenience, as with the
2074      GPDISP_LO16 reloc.
2075
2076      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2077      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2078      but it generates output not based on the position within the .got
2079      section, but relative to the GP value chosen for the file during the
2080      final link stage.
2081
2082      The LITUSE reloc, on the instruction using the loaded address, gives
2083      information to the linker that it might be able to use to optimize
2084      away some literal section references.  The symbol is ignored (read
2085      as the absolute section symbol), and the "addend" indicates the type
2086      of instruction using the register:
2087               1 - "memory" fmt insn
2088               2 - byte-manipulation (byte offset reg)
2089               3 - jsr (target of branch)
2090
2091 ENUM
2092   BFD_RELOC_ALPHA_HINT
2093 ENUMDOC
2094   The HINT relocation indicates a value that should be filled into the
2095      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2096      prediction logic which may be provided on some processors.
2097
2098 ENUM
2099   BFD_RELOC_ALPHA_LINKAGE
2100 ENUMDOC
2101   The LINKAGE relocation outputs a linkage pair in the object file,
2102      which is filled by the linker.
2103
2104 ENUM
2105   BFD_RELOC_ALPHA_CODEADDR
2106 ENUMDOC
2107   The CODEADDR relocation outputs a STO_CA in the object file,
2108      which is filled by the linker.
2109
2110 ENUM
2111   BFD_RELOC_ALPHA_GPREL_HI16
2112 ENUMX
2113   BFD_RELOC_ALPHA_GPREL_LO16
2114 ENUMDOC
2115   The GPREL_HI/LO relocations together form a 32-bit offset from the
2116      GP register.
2117
2118 ENUM
2119   BFD_RELOC_ALPHA_BRSGP
2120 ENUMDOC
2121   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2122   share a common GP, and the target address is adjusted for
2123   STO_ALPHA_STD_GPLOAD.
2124
2125 ENUM
2126   BFD_RELOC_ALPHA_NOP
2127 ENUMDOC
2128   The NOP relocation outputs a NOP if the longword displacement
2129      between two procedure entry points is < 2^21.
2130
2131 ENUM
2132   BFD_RELOC_ALPHA_BSR
2133 ENUMDOC
2134   The BSR relocation outputs a BSR if the longword displacement
2135      between two procedure entry points is < 2^21.
2136
2137 ENUM
2138   BFD_RELOC_ALPHA_LDA
2139 ENUMDOC
2140   The LDA relocation outputs a LDA if the longword displacement
2141      between two procedure entry points is < 2^16.
2142
2143 ENUM
2144   BFD_RELOC_ALPHA_BOH
2145 ENUMDOC
2146   The BOH relocation outputs a BSR if the longword displacement
2147      between two procedure entry points is < 2^21, or else a hint.
2148
2149 ENUM
2150   BFD_RELOC_ALPHA_TLSGD
2151 ENUMX
2152   BFD_RELOC_ALPHA_TLSLDM
2153 ENUMX
2154   BFD_RELOC_ALPHA_DTPMOD64
2155 ENUMX
2156   BFD_RELOC_ALPHA_GOTDTPREL16
2157 ENUMX
2158   BFD_RELOC_ALPHA_DTPREL64
2159 ENUMX
2160   BFD_RELOC_ALPHA_DTPREL_HI16
2161 ENUMX
2162   BFD_RELOC_ALPHA_DTPREL_LO16
2163 ENUMX
2164   BFD_RELOC_ALPHA_DTPREL16
2165 ENUMX
2166   BFD_RELOC_ALPHA_GOTTPREL16
2167 ENUMX
2168   BFD_RELOC_ALPHA_TPREL64
2169 ENUMX
2170   BFD_RELOC_ALPHA_TPREL_HI16
2171 ENUMX
2172   BFD_RELOC_ALPHA_TPREL_LO16
2173 ENUMX
2174   BFD_RELOC_ALPHA_TPREL16
2175 ENUMDOC
2176   Alpha thread-local storage relocations.
2177
2178 ENUM
2179   BFD_RELOC_MIPS_JMP
2180 ENUMDOC
2181   Bits 27..2 of the relocation address shifted right 2 bits;
2182      simple reloc otherwise.
2183
2184 ENUM
2185   BFD_RELOC_MIPS16_JMP
2186 ENUMDOC
2187   The MIPS16 jump instruction.
2188
2189 ENUM
2190   BFD_RELOC_MIPS16_GPREL
2191 ENUMDOC
2192   MIPS16 GP relative reloc.
2193
2194 ENUM
2195   BFD_RELOC_HI16
2196 ENUMDOC
2197   High 16 bits of 32-bit value; simple reloc.
2198 ENUM
2199   BFD_RELOC_HI16_S
2200 ENUMDOC
2201   High 16 bits of 32-bit value but the low 16 bits will be sign
2202      extended and added to form the final result.  If the low 16
2203      bits form a negative number, we need to add one to the high value
2204      to compensate for the borrow when the low bits are added.
2205 ENUM
2206   BFD_RELOC_LO16
2207 ENUMDOC
2208   Low 16 bits.
2209
2210 ENUM
2211   BFD_RELOC_HI16_PCREL
2212 ENUMDOC
2213   High 16 bits of 32-bit pc-relative value
2214 ENUM
2215   BFD_RELOC_HI16_S_PCREL
2216 ENUMDOC
2217   High 16 bits of 32-bit pc-relative value, adjusted
2218 ENUM
2219   BFD_RELOC_LO16_PCREL
2220 ENUMDOC
2221   Low 16 bits of pc-relative value
2222
2223 ENUM
2224   BFD_RELOC_MIPS16_GOT16
2225 ENUMX
2226   BFD_RELOC_MIPS16_CALL16
2227 ENUMDOC
2228   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2229      16-bit immediate fields
2230 ENUM
2231   BFD_RELOC_MIPS16_HI16
2232 ENUMDOC
2233   MIPS16 high 16 bits of 32-bit value.
2234 ENUM
2235   BFD_RELOC_MIPS16_HI16_S
2236 ENUMDOC
2237   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2238      extended and added to form the final result.  If the low 16
2239      bits form a negative number, we need to add one to the high value
2240      to compensate for the borrow when the low bits are added.
2241 ENUM
2242   BFD_RELOC_MIPS16_LO16
2243 ENUMDOC
2244   MIPS16 low 16 bits.
2245
2246 ENUM
2247   BFD_RELOC_MIPS_LITERAL
2248 ENUMDOC
2249   Relocation against a MIPS literal section.
2250
2251 ENUM
2252   BFD_RELOC_MIPS_GOT16
2253 ENUMX
2254   BFD_RELOC_MIPS_CALL16
2255 ENUMX
2256   BFD_RELOC_MIPS_GOT_HI16
2257 ENUMX
2258   BFD_RELOC_MIPS_GOT_LO16
2259 ENUMX
2260   BFD_RELOC_MIPS_CALL_HI16
2261 ENUMX
2262   BFD_RELOC_MIPS_CALL_LO16
2263 ENUMX
2264   BFD_RELOC_MIPS_SUB
2265 ENUMX
2266   BFD_RELOC_MIPS_GOT_PAGE
2267 ENUMX
2268   BFD_RELOC_MIPS_GOT_OFST
2269 ENUMX
2270   BFD_RELOC_MIPS_GOT_DISP
2271 ENUMX
2272   BFD_RELOC_MIPS_SHIFT5
2273 ENUMX
2274   BFD_RELOC_MIPS_SHIFT6
2275 ENUMX
2276   BFD_RELOC_MIPS_INSERT_A
2277 ENUMX
2278   BFD_RELOC_MIPS_INSERT_B
2279 ENUMX
2280   BFD_RELOC_MIPS_DELETE
2281 ENUMX
2282   BFD_RELOC_MIPS_HIGHEST
2283 ENUMX
2284   BFD_RELOC_MIPS_HIGHER
2285 ENUMX
2286   BFD_RELOC_MIPS_SCN_DISP
2287 ENUMX
2288   BFD_RELOC_MIPS_REL16
2289 ENUMX
2290   BFD_RELOC_MIPS_RELGOT
2291 ENUMX
2292   BFD_RELOC_MIPS_JALR
2293 ENUMX
2294   BFD_RELOC_MIPS_TLS_DTPMOD32
2295 ENUMX
2296   BFD_RELOC_MIPS_TLS_DTPREL32
2297 ENUMX
2298   BFD_RELOC_MIPS_TLS_DTPMOD64
2299 ENUMX
2300   BFD_RELOC_MIPS_TLS_DTPREL64
2301 ENUMX
2302   BFD_RELOC_MIPS_TLS_GD
2303 ENUMX
2304   BFD_RELOC_MIPS_TLS_LDM
2305 ENUMX
2306   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2307 ENUMX
2308   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2309 ENUMX
2310   BFD_RELOC_MIPS_TLS_GOTTPREL
2311 ENUMX
2312   BFD_RELOC_MIPS_TLS_TPREL32
2313 ENUMX
2314   BFD_RELOC_MIPS_TLS_TPREL64
2315 ENUMX
2316   BFD_RELOC_MIPS_TLS_TPREL_HI16
2317 ENUMX
2318   BFD_RELOC_MIPS_TLS_TPREL_LO16
2319 ENUMDOC
2320   MIPS ELF relocations.
2321 COMMENT
2322
2323 ENUM
2324   BFD_RELOC_MIPS_COPY
2325 ENUMX
2326   BFD_RELOC_MIPS_JUMP_SLOT
2327 ENUMDOC
2328   MIPS ELF relocations (VxWorks and PLT extensions).
2329 COMMENT
2330
2331 ENUM
2332   BFD_RELOC_MOXIE_10_PCREL
2333 ENUMDOC
2334   Moxie ELF relocations.
2335 COMMENT
2336
2337 ENUM
2338   BFD_RELOC_FRV_LABEL16
2339 ENUMX
2340   BFD_RELOC_FRV_LABEL24
2341 ENUMX
2342   BFD_RELOC_FRV_LO16
2343 ENUMX
2344   BFD_RELOC_FRV_HI16
2345 ENUMX
2346   BFD_RELOC_FRV_GPREL12
2347 ENUMX
2348   BFD_RELOC_FRV_GPRELU12
2349 ENUMX
2350   BFD_RELOC_FRV_GPREL32
2351 ENUMX
2352   BFD_RELOC_FRV_GPRELHI
2353 ENUMX
2354   BFD_RELOC_FRV_GPRELLO
2355 ENUMX
2356   BFD_RELOC_FRV_GOT12
2357 ENUMX
2358   BFD_RELOC_FRV_GOTHI
2359 ENUMX
2360   BFD_RELOC_FRV_GOTLO
2361 ENUMX
2362   BFD_RELOC_FRV_FUNCDESC
2363 ENUMX
2364   BFD_RELOC_FRV_FUNCDESC_GOT12
2365 ENUMX
2366   BFD_RELOC_FRV_FUNCDESC_GOTHI
2367 ENUMX
2368   BFD_RELOC_FRV_FUNCDESC_GOTLO
2369 ENUMX
2370   BFD_RELOC_FRV_FUNCDESC_VALUE
2371 ENUMX
2372   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2373 ENUMX
2374   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2375 ENUMX
2376   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2377 ENUMX
2378   BFD_RELOC_FRV_GOTOFF12
2379 ENUMX
2380   BFD_RELOC_FRV_GOTOFFHI
2381 ENUMX
2382   BFD_RELOC_FRV_GOTOFFLO
2383 ENUMX
2384   BFD_RELOC_FRV_GETTLSOFF
2385 ENUMX
2386   BFD_RELOC_FRV_TLSDESC_VALUE
2387 ENUMX
2388   BFD_RELOC_FRV_GOTTLSDESC12
2389 ENUMX
2390   BFD_RELOC_FRV_GOTTLSDESCHI
2391 ENUMX
2392   BFD_RELOC_FRV_GOTTLSDESCLO
2393 ENUMX
2394   BFD_RELOC_FRV_TLSMOFF12
2395 ENUMX
2396   BFD_RELOC_FRV_TLSMOFFHI
2397 ENUMX
2398   BFD_RELOC_FRV_TLSMOFFLO
2399 ENUMX
2400   BFD_RELOC_FRV_GOTTLSOFF12
2401 ENUMX
2402   BFD_RELOC_FRV_GOTTLSOFFHI
2403 ENUMX
2404   BFD_RELOC_FRV_GOTTLSOFFLO
2405 ENUMX
2406   BFD_RELOC_FRV_TLSOFF
2407 ENUMX
2408   BFD_RELOC_FRV_TLSDESC_RELAX
2409 ENUMX
2410   BFD_RELOC_FRV_GETTLSOFF_RELAX
2411 ENUMX
2412   BFD_RELOC_FRV_TLSOFF_RELAX
2413 ENUMX
2414   BFD_RELOC_FRV_TLSMOFF
2415 ENUMDOC
2416   Fujitsu Frv Relocations.
2417 COMMENT
2418
2419 ENUM
2420   BFD_RELOC_MN10300_GOTOFF24
2421 ENUMDOC
2422   This is a 24bit GOT-relative reloc for the mn10300.
2423 ENUM
2424   BFD_RELOC_MN10300_GOT32
2425 ENUMDOC
2426   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2427   in the instruction.
2428 ENUM
2429   BFD_RELOC_MN10300_GOT24
2430 ENUMDOC
2431   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2432   in the instruction.
2433 ENUM
2434   BFD_RELOC_MN10300_GOT16
2435 ENUMDOC
2436   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2437   in the instruction.
2438 ENUM
2439   BFD_RELOC_MN10300_COPY
2440 ENUMDOC
2441   Copy symbol at runtime.
2442 ENUM
2443   BFD_RELOC_MN10300_GLOB_DAT
2444 ENUMDOC
2445   Create GOT entry.
2446 ENUM
2447   BFD_RELOC_MN10300_JMP_SLOT
2448 ENUMDOC
2449   Create PLT entry.
2450 ENUM
2451   BFD_RELOC_MN10300_RELATIVE
2452 ENUMDOC
2453   Adjust by program base.
2454 ENUM
2455   BFD_RELOC_MN10300_SYM_DIFF
2456 ENUMDOC
2457   Together with another reloc targeted at the same location,
2458   allows for a value that is the difference of two symbols
2459   in the same section.
2460 ENUM
2461   BFD_RELOC_MN10300_ALIGN
2462 ENUMDOC
2463   The addend of this reloc is an alignment power that must
2464   be honoured at the offset's location, regardless of linker
2465   relaxation.
2466 COMMENT
2467
2468 ENUM
2469   BFD_RELOC_386_GOT32
2470 ENUMX
2471   BFD_RELOC_386_PLT32
2472 ENUMX
2473   BFD_RELOC_386_COPY
2474 ENUMX
2475   BFD_RELOC_386_GLOB_DAT
2476 ENUMX
2477   BFD_RELOC_386_JUMP_SLOT
2478 ENUMX
2479   BFD_RELOC_386_RELATIVE
2480 ENUMX
2481   BFD_RELOC_386_GOTOFF
2482 ENUMX
2483   BFD_RELOC_386_GOTPC
2484 ENUMX
2485   BFD_RELOC_386_TLS_TPOFF
2486 ENUMX
2487   BFD_RELOC_386_TLS_IE
2488 ENUMX
2489   BFD_RELOC_386_TLS_GOTIE
2490 ENUMX
2491   BFD_RELOC_386_TLS_LE
2492 ENUMX
2493   BFD_RELOC_386_TLS_GD
2494 ENUMX
2495   BFD_RELOC_386_TLS_LDM
2496 ENUMX
2497   BFD_RELOC_386_TLS_LDO_32
2498 ENUMX
2499   BFD_RELOC_386_TLS_IE_32
2500 ENUMX
2501   BFD_RELOC_386_TLS_LE_32
2502 ENUMX
2503   BFD_RELOC_386_TLS_DTPMOD32
2504 ENUMX
2505   BFD_RELOC_386_TLS_DTPOFF32
2506 ENUMX
2507   BFD_RELOC_386_TLS_TPOFF32
2508 ENUMX
2509   BFD_RELOC_386_TLS_GOTDESC
2510 ENUMX
2511   BFD_RELOC_386_TLS_DESC_CALL
2512 ENUMX
2513   BFD_RELOC_386_TLS_DESC
2514 ENUMX
2515   BFD_RELOC_386_IRELATIVE
2516 ENUMDOC
2517   i386/elf relocations
2518
2519 ENUM
2520   BFD_RELOC_X86_64_GOT32
2521 ENUMX
2522   BFD_RELOC_X86_64_PLT32
2523 ENUMX
2524   BFD_RELOC_X86_64_COPY
2525 ENUMX
2526   BFD_RELOC_X86_64_GLOB_DAT
2527 ENUMX
2528   BFD_RELOC_X86_64_JUMP_SLOT
2529 ENUMX
2530   BFD_RELOC_X86_64_RELATIVE
2531 ENUMX
2532   BFD_RELOC_X86_64_GOTPCREL
2533 ENUMX
2534   BFD_RELOC_X86_64_32S
2535 ENUMX
2536   BFD_RELOC_X86_64_DTPMOD64
2537 ENUMX
2538   BFD_RELOC_X86_64_DTPOFF64
2539 ENUMX
2540   BFD_RELOC_X86_64_TPOFF64
2541 ENUMX
2542   BFD_RELOC_X86_64_TLSGD
2543 ENUMX
2544   BFD_RELOC_X86_64_TLSLD
2545 ENUMX
2546   BFD_RELOC_X86_64_DTPOFF32
2547 ENUMX
2548   BFD_RELOC_X86_64_GOTTPOFF
2549 ENUMX
2550   BFD_RELOC_X86_64_TPOFF32
2551 ENUMX
2552   BFD_RELOC_X86_64_GOTOFF64
2553 ENUMX
2554   BFD_RELOC_X86_64_GOTPC32
2555 ENUMX
2556   BFD_RELOC_X86_64_GOT64
2557 ENUMX
2558   BFD_RELOC_X86_64_GOTPCREL64
2559 ENUMX
2560   BFD_RELOC_X86_64_GOTPC64
2561 ENUMX
2562   BFD_RELOC_X86_64_GOTPLT64
2563 ENUMX
2564   BFD_RELOC_X86_64_PLTOFF64
2565 ENUMX
2566   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2567 ENUMX
2568   BFD_RELOC_X86_64_TLSDESC_CALL
2569 ENUMX
2570   BFD_RELOC_X86_64_TLSDESC
2571 ENUMX
2572   BFD_RELOC_X86_64_IRELATIVE
2573 ENUMDOC
2574   x86-64/elf relocations
2575
2576 ENUM
2577   BFD_RELOC_NS32K_IMM_8
2578 ENUMX
2579   BFD_RELOC_NS32K_IMM_16
2580 ENUMX
2581   BFD_RELOC_NS32K_IMM_32
2582 ENUMX
2583   BFD_RELOC_NS32K_IMM_8_PCREL
2584 ENUMX
2585   BFD_RELOC_NS32K_IMM_16_PCREL
2586 ENUMX
2587   BFD_RELOC_NS32K_IMM_32_PCREL
2588 ENUMX
2589   BFD_RELOC_NS32K_DISP_8
2590 ENUMX
2591   BFD_RELOC_NS32K_DISP_16
2592 ENUMX
2593   BFD_RELOC_NS32K_DISP_32
2594 ENUMX
2595   BFD_RELOC_NS32K_DISP_8_PCREL
2596 ENUMX
2597   BFD_RELOC_NS32K_DISP_16_PCREL
2598 ENUMX
2599   BFD_RELOC_NS32K_DISP_32_PCREL
2600 ENUMDOC
2601   ns32k relocations
2602
2603 ENUM
2604   BFD_RELOC_PDP11_DISP_8_PCREL
2605 ENUMX
2606   BFD_RELOC_PDP11_DISP_6_PCREL
2607 ENUMDOC
2608   PDP11 relocations
2609
2610 ENUM
2611   BFD_RELOC_PJ_CODE_HI16
2612 ENUMX
2613   BFD_RELOC_PJ_CODE_LO16
2614 ENUMX
2615   BFD_RELOC_PJ_CODE_DIR16
2616 ENUMX
2617   BFD_RELOC_PJ_CODE_DIR32
2618 ENUMX
2619   BFD_RELOC_PJ_CODE_REL16
2620 ENUMX
2621   BFD_RELOC_PJ_CODE_REL32
2622 ENUMDOC
2623   Picojava relocs.  Not all of these appear in object files.
2624
2625 ENUM
2626   BFD_RELOC_PPC_B26
2627 ENUMX
2628   BFD_RELOC_PPC_BA26
2629 ENUMX
2630   BFD_RELOC_PPC_TOC16
2631 ENUMX
2632   BFD_RELOC_PPC_B16
2633 ENUMX
2634   BFD_RELOC_PPC_B16_BRTAKEN
2635 ENUMX
2636   BFD_RELOC_PPC_B16_BRNTAKEN
2637 ENUMX
2638   BFD_RELOC_PPC_BA16
2639 ENUMX
2640   BFD_RELOC_PPC_BA16_BRTAKEN
2641 ENUMX
2642   BFD_RELOC_PPC_BA16_BRNTAKEN
2643 ENUMX
2644   BFD_RELOC_PPC_COPY
2645 ENUMX
2646   BFD_RELOC_PPC_GLOB_DAT
2647 ENUMX
2648   BFD_RELOC_PPC_JMP_SLOT
2649 ENUMX
2650   BFD_RELOC_PPC_RELATIVE
2651 ENUMX
2652   BFD_RELOC_PPC_LOCAL24PC
2653 ENUMX
2654   BFD_RELOC_PPC_EMB_NADDR32
2655 ENUMX
2656   BFD_RELOC_PPC_EMB_NADDR16
2657 ENUMX
2658   BFD_RELOC_PPC_EMB_NADDR16_LO
2659 ENUMX
2660   BFD_RELOC_PPC_EMB_NADDR16_HI
2661 ENUMX
2662   BFD_RELOC_PPC_EMB_NADDR16_HA
2663 ENUMX
2664   BFD_RELOC_PPC_EMB_SDAI16
2665 ENUMX
2666   BFD_RELOC_PPC_EMB_SDA2I16
2667 ENUMX
2668   BFD_RELOC_PPC_EMB_SDA2REL
2669 ENUMX
2670   BFD_RELOC_PPC_EMB_SDA21
2671 ENUMX
2672   BFD_RELOC_PPC_EMB_MRKREF
2673 ENUMX
2674   BFD_RELOC_PPC_EMB_RELSEC16
2675 ENUMX
2676   BFD_RELOC_PPC_EMB_RELST_LO
2677 ENUMX
2678   BFD_RELOC_PPC_EMB_RELST_HI
2679 ENUMX
2680   BFD_RELOC_PPC_EMB_RELST_HA
2681 ENUMX
2682   BFD_RELOC_PPC_EMB_BIT_FLD
2683 ENUMX
2684   BFD_RELOC_PPC_EMB_RELSDA
2685 ENUMX
2686   BFD_RELOC_PPC64_HIGHER
2687 ENUMX
2688   BFD_RELOC_PPC64_HIGHER_S
2689 ENUMX
2690   BFD_RELOC_PPC64_HIGHEST
2691 ENUMX
2692   BFD_RELOC_PPC64_HIGHEST_S
2693 ENUMX
2694   BFD_RELOC_PPC64_TOC16_LO
2695 ENUMX
2696   BFD_RELOC_PPC64_TOC16_HI
2697 ENUMX
2698   BFD_RELOC_PPC64_TOC16_HA
2699 ENUMX
2700   BFD_RELOC_PPC64_TOC
2701 ENUMX
2702   BFD_RELOC_PPC64_PLTGOT16
2703 ENUMX
2704   BFD_RELOC_PPC64_PLTGOT16_LO
2705 ENUMX
2706   BFD_RELOC_PPC64_PLTGOT16_HI
2707 ENUMX
2708   BFD_RELOC_PPC64_PLTGOT16_HA
2709 ENUMX
2710   BFD_RELOC_PPC64_ADDR16_DS
2711 ENUMX
2712   BFD_RELOC_PPC64_ADDR16_LO_DS
2713 ENUMX
2714   BFD_RELOC_PPC64_GOT16_DS
2715 ENUMX
2716   BFD_RELOC_PPC64_GOT16_LO_DS
2717 ENUMX
2718   BFD_RELOC_PPC64_PLT16_LO_DS
2719 ENUMX
2720   BFD_RELOC_PPC64_SECTOFF_DS
2721 ENUMX
2722   BFD_RELOC_PPC64_SECTOFF_LO_DS
2723 ENUMX
2724   BFD_RELOC_PPC64_TOC16_DS
2725 ENUMX
2726   BFD_RELOC_PPC64_TOC16_LO_DS
2727 ENUMX
2728   BFD_RELOC_PPC64_PLTGOT16_DS
2729 ENUMX
2730   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2731 ENUMDOC
2732   Power(rs6000) and PowerPC relocations.
2733
2734 ENUM
2735   BFD_RELOC_PPC_TLS
2736 ENUMX
2737   BFD_RELOC_PPC_TLSGD
2738 ENUMX
2739   BFD_RELOC_PPC_TLSLD
2740 ENUMX
2741   BFD_RELOC_PPC_DTPMOD
2742 ENUMX
2743   BFD_RELOC_PPC_TPREL16
2744 ENUMX
2745   BFD_RELOC_PPC_TPREL16_LO
2746 ENUMX
2747   BFD_RELOC_PPC_TPREL16_HI
2748 ENUMX
2749   BFD_RELOC_PPC_TPREL16_HA
2750 ENUMX
2751   BFD_RELOC_PPC_TPREL
2752 ENUMX
2753   BFD_RELOC_PPC_DTPREL16
2754 ENUMX
2755   BFD_RELOC_PPC_DTPREL16_LO
2756 ENUMX
2757   BFD_RELOC_PPC_DTPREL16_HI
2758 ENUMX
2759   BFD_RELOC_PPC_DTPREL16_HA
2760 ENUMX
2761   BFD_RELOC_PPC_DTPREL
2762 ENUMX
2763   BFD_RELOC_PPC_GOT_TLSGD16
2764 ENUMX
2765   BFD_RELOC_PPC_GOT_TLSGD16_LO
2766 ENUMX
2767   BFD_RELOC_PPC_GOT_TLSGD16_HI
2768 ENUMX
2769   BFD_RELOC_PPC_GOT_TLSGD16_HA
2770 ENUMX
2771   BFD_RELOC_PPC_GOT_TLSLD16
2772 ENUMX
2773   BFD_RELOC_PPC_GOT_TLSLD16_LO
2774 ENUMX
2775   BFD_RELOC_PPC_GOT_TLSLD16_HI
2776 ENUMX
2777   BFD_RELOC_PPC_GOT_TLSLD16_HA
2778 ENUMX
2779   BFD_RELOC_PPC_GOT_TPREL16
2780 ENUMX
2781   BFD_RELOC_PPC_GOT_TPREL16_LO
2782 ENUMX
2783   BFD_RELOC_PPC_GOT_TPREL16_HI
2784 ENUMX
2785   BFD_RELOC_PPC_GOT_TPREL16_HA
2786 ENUMX
2787   BFD_RELOC_PPC_GOT_DTPREL16
2788 ENUMX
2789   BFD_RELOC_PPC_GOT_DTPREL16_LO
2790 ENUMX
2791   BFD_RELOC_PPC_GOT_DTPREL16_HI
2792 ENUMX
2793   BFD_RELOC_PPC_GOT_DTPREL16_HA
2794 ENUMX
2795   BFD_RELOC_PPC64_TPREL16_DS
2796 ENUMX
2797   BFD_RELOC_PPC64_TPREL16_LO_DS
2798 ENUMX
2799   BFD_RELOC_PPC64_TPREL16_HIGHER
2800 ENUMX
2801   BFD_RELOC_PPC64_TPREL16_HIGHERA
2802 ENUMX
2803   BFD_RELOC_PPC64_TPREL16_HIGHEST
2804 ENUMX
2805   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2806 ENUMX
2807   BFD_RELOC_PPC64_DTPREL16_DS
2808 ENUMX
2809   BFD_RELOC_PPC64_DTPREL16_LO_DS
2810 ENUMX
2811   BFD_RELOC_PPC64_DTPREL16_HIGHER
2812 ENUMX
2813   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2814 ENUMX
2815   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2816 ENUMX
2817   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2818 ENUMDOC
2819   PowerPC and PowerPC64 thread-local storage relocations.
2820
2821 ENUM
2822   BFD_RELOC_I370_D12
2823 ENUMDOC
2824   IBM 370/390 relocations
2825
2826 ENUM
2827   BFD_RELOC_CTOR
2828 ENUMDOC
2829   The type of reloc used to build a constructor table - at the moment
2830   probably a 32 bit wide absolute relocation, but the target can choose.
2831   It generally does map to one of the other relocation types.
2832
2833 ENUM
2834   BFD_RELOC_ARM_PCREL_BRANCH
2835 ENUMDOC
2836   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2837   not stored in the instruction.
2838 ENUM
2839   BFD_RELOC_ARM_PCREL_BLX
2840 ENUMDOC
2841   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2842   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2843   field in the instruction.
2844 ENUM
2845   BFD_RELOC_THUMB_PCREL_BLX
2846 ENUMDOC
2847   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2848   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2849   field in the instruction.
2850 ENUM
2851   BFD_RELOC_ARM_PCREL_CALL
2852 ENUMDOC
2853   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2854 ENUM
2855   BFD_RELOC_ARM_PCREL_JUMP
2856 ENUMDOC
2857   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2858
2859 ENUM
2860   BFD_RELOC_THUMB_PCREL_BRANCH7
2861 ENUMX
2862   BFD_RELOC_THUMB_PCREL_BRANCH9
2863 ENUMX
2864   BFD_RELOC_THUMB_PCREL_BRANCH12
2865 ENUMX
2866   BFD_RELOC_THUMB_PCREL_BRANCH20
2867 ENUMX
2868   BFD_RELOC_THUMB_PCREL_BRANCH23
2869 ENUMX
2870   BFD_RELOC_THUMB_PCREL_BRANCH25
2871 ENUMDOC
2872   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2873   The lowest bit must be zero and is not stored in the instruction.
2874   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2875   "nn" one smaller in all cases.  Note further that BRANCH23
2876   corresponds to R_ARM_THM_CALL.
2877
2878 ENUM
2879   BFD_RELOC_ARM_OFFSET_IMM
2880 ENUMDOC
2881   12-bit immediate offset, used in ARM-format ldr and str instructions.
2882
2883 ENUM
2884   BFD_RELOC_ARM_THUMB_OFFSET
2885 ENUMDOC
2886   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2887
2888 ENUM
2889   BFD_RELOC_ARM_TARGET1
2890 ENUMDOC
2891   Pc-relative or absolute relocation depending on target.  Used for
2892   entries in .init_array sections.
2893 ENUM
2894   BFD_RELOC_ARM_ROSEGREL32
2895 ENUMDOC
2896   Read-only segment base relative address.
2897 ENUM
2898   BFD_RELOC_ARM_SBREL32
2899 ENUMDOC
2900   Data segment base relative address.
2901 ENUM
2902   BFD_RELOC_ARM_TARGET2
2903 ENUMDOC
2904   This reloc is used for references to RTTI data from exception handling
2905   tables.  The actual definition depends on the target.  It may be a
2906   pc-relative or some form of GOT-indirect relocation.
2907 ENUM
2908   BFD_RELOC_ARM_PREL31
2909 ENUMDOC
2910   31-bit PC relative address.
2911 ENUM
2912   BFD_RELOC_ARM_MOVW
2913 ENUMX
2914   BFD_RELOC_ARM_MOVT
2915 ENUMX
2916   BFD_RELOC_ARM_MOVW_PCREL
2917 ENUMX
2918   BFD_RELOC_ARM_MOVT_PCREL
2919 ENUMX
2920   BFD_RELOC_ARM_THUMB_MOVW
2921 ENUMX
2922   BFD_RELOC_ARM_THUMB_MOVT
2923 ENUMX
2924   BFD_RELOC_ARM_THUMB_MOVW_PCREL
2925 ENUMX
2926   BFD_RELOC_ARM_THUMB_MOVT_PCREL
2927 ENUMDOC
2928   Low and High halfword relocations for MOVW and MOVT instructions.
2929
2930 ENUM
2931   BFD_RELOC_ARM_JUMP_SLOT
2932 ENUMX
2933   BFD_RELOC_ARM_GLOB_DAT
2934 ENUMX
2935   BFD_RELOC_ARM_GOT32
2936 ENUMX
2937   BFD_RELOC_ARM_PLT32
2938 ENUMX
2939   BFD_RELOC_ARM_RELATIVE
2940 ENUMX
2941   BFD_RELOC_ARM_GOTOFF
2942 ENUMX
2943   BFD_RELOC_ARM_GOTPC
2944 ENUMX
2945   BFD_RELOC_ARM_GOT_PREL
2946 ENUMDOC
2947   Relocations for setting up GOTs and PLTs for shared libraries.
2948
2949 ENUM
2950   BFD_RELOC_ARM_TLS_GD32
2951 ENUMX
2952   BFD_RELOC_ARM_TLS_LDO32
2953 ENUMX
2954   BFD_RELOC_ARM_TLS_LDM32
2955 ENUMX
2956   BFD_RELOC_ARM_TLS_DTPOFF32
2957 ENUMX
2958   BFD_RELOC_ARM_TLS_DTPMOD32
2959 ENUMX
2960   BFD_RELOC_ARM_TLS_TPOFF32
2961 ENUMX
2962   BFD_RELOC_ARM_TLS_IE32
2963 ENUMX
2964   BFD_RELOC_ARM_TLS_LE32
2965 ENUMDOC
2966   ARM thread-local storage relocations.
2967
2968 ENUM
2969   BFD_RELOC_ARM_ALU_PC_G0_NC
2970 ENUMX
2971   BFD_RELOC_ARM_ALU_PC_G0
2972 ENUMX
2973   BFD_RELOC_ARM_ALU_PC_G1_NC
2974 ENUMX
2975   BFD_RELOC_ARM_ALU_PC_G1
2976 ENUMX
2977   BFD_RELOC_ARM_ALU_PC_G2
2978 ENUMX
2979   BFD_RELOC_ARM_LDR_PC_G0
2980 ENUMX
2981   BFD_RELOC_ARM_LDR_PC_G1
2982 ENUMX
2983   BFD_RELOC_ARM_LDR_PC_G2
2984 ENUMX
2985   BFD_RELOC_ARM_LDRS_PC_G0
2986 ENUMX
2987   BFD_RELOC_ARM_LDRS_PC_G1
2988 ENUMX
2989   BFD_RELOC_ARM_LDRS_PC_G2
2990 ENUMX
2991   BFD_RELOC_ARM_LDC_PC_G0
2992 ENUMX
2993   BFD_RELOC_ARM_LDC_PC_G1
2994 ENUMX
2995   BFD_RELOC_ARM_LDC_PC_G2
2996 ENUMX
2997   BFD_RELOC_ARM_ALU_SB_G0_NC
2998 ENUMX
2999   BFD_RELOC_ARM_ALU_SB_G0
3000 ENUMX
3001   BFD_RELOC_ARM_ALU_SB_G1_NC
3002 ENUMX
3003   BFD_RELOC_ARM_ALU_SB_G1
3004 ENUMX
3005   BFD_RELOC_ARM_ALU_SB_G2
3006 ENUMX
3007   BFD_RELOC_ARM_LDR_SB_G0
3008 ENUMX
3009   BFD_RELOC_ARM_LDR_SB_G1
3010 ENUMX
3011   BFD_RELOC_ARM_LDR_SB_G2
3012 ENUMX
3013   BFD_RELOC_ARM_LDRS_SB_G0
3014 ENUMX
3015   BFD_RELOC_ARM_LDRS_SB_G1
3016 ENUMX
3017   BFD_RELOC_ARM_LDRS_SB_G2
3018 ENUMX
3019   BFD_RELOC_ARM_LDC_SB_G0
3020 ENUMX
3021   BFD_RELOC_ARM_LDC_SB_G1
3022 ENUMX
3023   BFD_RELOC_ARM_LDC_SB_G2
3024 ENUMDOC
3025   ARM group relocations.
3026
3027 ENUM
3028   BFD_RELOC_ARM_V4BX
3029 ENUMDOC
3030   Annotation of BX instructions.
3031
3032 ENUM
3033   BFD_RELOC_ARM_IMMEDIATE
3034 ENUMX
3035   BFD_RELOC_ARM_ADRL_IMMEDIATE
3036 ENUMX
3037   BFD_RELOC_ARM_T32_IMMEDIATE
3038 ENUMX
3039   BFD_RELOC_ARM_T32_ADD_IMM
3040 ENUMX
3041   BFD_RELOC_ARM_T32_IMM12
3042 ENUMX
3043   BFD_RELOC_ARM_T32_ADD_PC12
3044 ENUMX
3045   BFD_RELOC_ARM_SHIFT_IMM
3046 ENUMX
3047   BFD_RELOC_ARM_SMC
3048 ENUMX
3049   BFD_RELOC_ARM_HVC
3050 ENUMX
3051   BFD_RELOC_ARM_SWI
3052 ENUMX
3053   BFD_RELOC_ARM_MULTI
3054 ENUMX
3055   BFD_RELOC_ARM_CP_OFF_IMM
3056 ENUMX
3057   BFD_RELOC_ARM_CP_OFF_IMM_S2
3058 ENUMX
3059   BFD_RELOC_ARM_T32_CP_OFF_IMM
3060 ENUMX
3061   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3062 ENUMX
3063   BFD_RELOC_ARM_ADR_IMM
3064 ENUMX
3065   BFD_RELOC_ARM_LDR_IMM
3066 ENUMX
3067   BFD_RELOC_ARM_LITERAL
3068 ENUMX
3069   BFD_RELOC_ARM_IN_POOL
3070 ENUMX
3071   BFD_RELOC_ARM_OFFSET_IMM8
3072 ENUMX
3073   BFD_RELOC_ARM_T32_OFFSET_U8
3074 ENUMX
3075   BFD_RELOC_ARM_T32_OFFSET_IMM
3076 ENUMX
3077   BFD_RELOC_ARM_HWLITERAL
3078 ENUMX
3079   BFD_RELOC_ARM_THUMB_ADD
3080 ENUMX
3081   BFD_RELOC_ARM_THUMB_IMM
3082 ENUMX
3083   BFD_RELOC_ARM_THUMB_SHIFT
3084 ENUMDOC
3085   These relocs are only used within the ARM assembler.  They are not
3086   (at present) written to any object files.
3087
3088 ENUM
3089   BFD_RELOC_SH_PCDISP8BY2
3090 ENUMX
3091   BFD_RELOC_SH_PCDISP12BY2
3092 ENUMX
3093   BFD_RELOC_SH_IMM3
3094 ENUMX
3095   BFD_RELOC_SH_IMM3U
3096 ENUMX
3097   BFD_RELOC_SH_DISP12
3098 ENUMX
3099   BFD_RELOC_SH_DISP12BY2
3100 ENUMX
3101   BFD_RELOC_SH_DISP12BY4
3102 ENUMX
3103   BFD_RELOC_SH_DISP12BY8
3104 ENUMX
3105   BFD_RELOC_SH_DISP20
3106 ENUMX
3107   BFD_RELOC_SH_DISP20BY8
3108 ENUMX
3109   BFD_RELOC_SH_IMM4
3110 ENUMX
3111   BFD_RELOC_SH_IMM4BY2
3112 ENUMX
3113   BFD_RELOC_SH_IMM4BY4
3114 ENUMX
3115   BFD_RELOC_SH_IMM8
3116 ENUMX
3117   BFD_RELOC_SH_IMM8BY2
3118 ENUMX
3119   BFD_RELOC_SH_IMM8BY4
3120 ENUMX
3121   BFD_RELOC_SH_PCRELIMM8BY2
3122 ENUMX
3123   BFD_RELOC_SH_PCRELIMM8BY4
3124 ENUMX
3125   BFD_RELOC_SH_SWITCH16
3126 ENUMX
3127   BFD_RELOC_SH_SWITCH32
3128 ENUMX
3129   BFD_RELOC_SH_USES
3130 ENUMX
3131   BFD_RELOC_SH_COUNT
3132 ENUMX
3133   BFD_RELOC_SH_ALIGN
3134 ENUMX
3135   BFD_RELOC_SH_CODE
3136 ENUMX
3137   BFD_RELOC_SH_DATA
3138 ENUMX
3139   BFD_RELOC_SH_LABEL
3140 ENUMX
3141   BFD_RELOC_SH_LOOP_START
3142 ENUMX
3143   BFD_RELOC_SH_LOOP_END
3144 ENUMX
3145   BFD_RELOC_SH_COPY
3146 ENUMX
3147   BFD_RELOC_SH_GLOB_DAT
3148 ENUMX
3149   BFD_RELOC_SH_JMP_SLOT
3150 ENUMX
3151   BFD_RELOC_SH_RELATIVE
3152 ENUMX
3153   BFD_RELOC_SH_GOTPC
3154 ENUMX
3155   BFD_RELOC_SH_GOT_LOW16
3156 ENUMX
3157   BFD_RELOC_SH_GOT_MEDLOW16
3158 ENUMX
3159   BFD_RELOC_SH_GOT_MEDHI16
3160 ENUMX
3161   BFD_RELOC_SH_GOT_HI16
3162 ENUMX
3163   BFD_RELOC_SH_GOTPLT_LOW16
3164 ENUMX
3165   BFD_RELOC_SH_GOTPLT_MEDLOW16
3166 ENUMX
3167   BFD_RELOC_SH_GOTPLT_MEDHI16
3168 ENUMX
3169   BFD_RELOC_SH_GOTPLT_HI16
3170 ENUMX
3171   BFD_RELOC_SH_PLT_LOW16
3172 ENUMX
3173   BFD_RELOC_SH_PLT_MEDLOW16
3174 ENUMX
3175   BFD_RELOC_SH_PLT_MEDHI16
3176 ENUMX
3177   BFD_RELOC_SH_PLT_HI16
3178 ENUMX
3179   BFD_RELOC_SH_GOTOFF_LOW16
3180 ENUMX
3181   BFD_RELOC_SH_GOTOFF_MEDLOW16
3182 ENUMX
3183   BFD_RELOC_SH_GOTOFF_MEDHI16
3184 ENUMX
3185   BFD_RELOC_SH_GOTOFF_HI16
3186 ENUMX
3187   BFD_RELOC_SH_GOTPC_LOW16
3188 ENUMX
3189   BFD_RELOC_SH_GOTPC_MEDLOW16
3190 ENUMX
3191   BFD_RELOC_SH_GOTPC_MEDHI16
3192 ENUMX
3193   BFD_RELOC_SH_GOTPC_HI16
3194 ENUMX
3195   BFD_RELOC_SH_COPY64
3196 ENUMX
3197   BFD_RELOC_SH_GLOB_DAT64
3198 ENUMX
3199   BFD_RELOC_SH_JMP_SLOT64
3200 ENUMX
3201   BFD_RELOC_SH_RELATIVE64
3202 ENUMX
3203   BFD_RELOC_SH_GOT10BY4
3204 ENUMX
3205   BFD_RELOC_SH_GOT10BY8
3206 ENUMX
3207   BFD_RELOC_SH_GOTPLT10BY4
3208 ENUMX
3209   BFD_RELOC_SH_GOTPLT10BY8
3210 ENUMX
3211   BFD_RELOC_SH_GOTPLT32
3212 ENUMX
3213   BFD_RELOC_SH_SHMEDIA_CODE
3214 ENUMX
3215   BFD_RELOC_SH_IMMU5
3216 ENUMX
3217   BFD_RELOC_SH_IMMS6
3218 ENUMX
3219   BFD_RELOC_SH_IMMS6BY32
3220 ENUMX
3221   BFD_RELOC_SH_IMMU6
3222 ENUMX
3223   BFD_RELOC_SH_IMMS10
3224 ENUMX
3225   BFD_RELOC_SH_IMMS10BY2
3226 ENUMX
3227   BFD_RELOC_SH_IMMS10BY4
3228 ENUMX
3229   BFD_RELOC_SH_IMMS10BY8
3230 ENUMX
3231   BFD_RELOC_SH_IMMS16
3232 ENUMX
3233   BFD_RELOC_SH_IMMU16
3234 ENUMX
3235   BFD_RELOC_SH_IMM_LOW16
3236 ENUMX
3237   BFD_RELOC_SH_IMM_LOW16_PCREL
3238 ENUMX
3239   BFD_RELOC_SH_IMM_MEDLOW16
3240 ENUMX
3241   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3242 ENUMX
3243   BFD_RELOC_SH_IMM_MEDHI16
3244 ENUMX
3245   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3246 ENUMX
3247   BFD_RELOC_SH_IMM_HI16
3248 ENUMX
3249   BFD_RELOC_SH_IMM_HI16_PCREL
3250 ENUMX
3251   BFD_RELOC_SH_PT_16
3252 ENUMX
3253   BFD_RELOC_SH_TLS_GD_32
3254 ENUMX
3255   BFD_RELOC_SH_TLS_LD_32
3256 ENUMX
3257   BFD_RELOC_SH_TLS_LDO_32
3258 ENUMX
3259   BFD_RELOC_SH_TLS_IE_32
3260 ENUMX
3261   BFD_RELOC_SH_TLS_LE_32
3262 ENUMX
3263   BFD_RELOC_SH_TLS_DTPMOD32
3264 ENUMX
3265   BFD_RELOC_SH_TLS_DTPOFF32
3266 ENUMX
3267   BFD_RELOC_SH_TLS_TPOFF32
3268 ENUMX
3269   BFD_RELOC_SH_GOT20
3270 ENUMX
3271   BFD_RELOC_SH_GOTOFF20
3272 ENUMX
3273   BFD_RELOC_SH_GOTFUNCDESC
3274 ENUMX
3275   BFD_RELOC_SH_GOTFUNCDESC20
3276 ENUMX
3277   BFD_RELOC_SH_GOTOFFFUNCDESC
3278 ENUMX
3279   BFD_RELOC_SH_GOTOFFFUNCDESC20
3280 ENUMX
3281   BFD_RELOC_SH_FUNCDESC
3282 ENUMDOC
3283   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3284
3285 ENUM
3286   BFD_RELOC_ARC_B22_PCREL
3287 ENUMDOC
3288   ARC Cores relocs.
3289   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3290   not stored in the instruction.  The high 20 bits are installed in bits 26
3291   through 7 of the instruction.
3292 ENUM
3293   BFD_RELOC_ARC_B26
3294 ENUMDOC
3295   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3296   stored in the instruction.  The high 24 bits are installed in bits 23
3297   through 0.
3298
3299 ENUM
3300   BFD_RELOC_BFIN_16_IMM
3301 ENUMDOC
3302   ADI Blackfin 16 bit immediate absolute reloc.
3303 ENUM
3304   BFD_RELOC_BFIN_16_HIGH
3305 ENUMDOC
3306   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3307 ENUM
3308   BFD_RELOC_BFIN_4_PCREL
3309 ENUMDOC
3310   ADI Blackfin 'a' part of LSETUP.
3311 ENUM
3312   BFD_RELOC_BFIN_5_PCREL
3313 ENUMDOC
3314   ADI Blackfin.
3315 ENUM
3316   BFD_RELOC_BFIN_16_LOW
3317 ENUMDOC
3318   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3319 ENUM
3320   BFD_RELOC_BFIN_10_PCREL
3321 ENUMDOC
3322   ADI Blackfin.
3323 ENUM
3324   BFD_RELOC_BFIN_11_PCREL
3325 ENUMDOC
3326   ADI Blackfin 'b' part of LSETUP.
3327 ENUM
3328   BFD_RELOC_BFIN_12_PCREL_JUMP
3329 ENUMDOC
3330   ADI Blackfin.
3331 ENUM
3332   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3333 ENUMDOC
3334   ADI Blackfin Short jump, pcrel.
3335 ENUM
3336   BFD_RELOC_BFIN_24_PCREL_CALL_X
3337 ENUMDOC
3338   ADI Blackfin Call.x not implemented.
3339 ENUM
3340   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3341 ENUMDOC
3342   ADI Blackfin Long Jump pcrel.
3343 ENUM
3344   BFD_RELOC_BFIN_GOT17M4
3345 ENUMX
3346   BFD_RELOC_BFIN_GOTHI
3347 ENUMX
3348   BFD_RELOC_BFIN_GOTLO
3349 ENUMX
3350   BFD_RELOC_BFIN_FUNCDESC
3351 ENUMX
3352   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3353 ENUMX
3354   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3355 ENUMX
3356   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3357 ENUMX
3358   BFD_RELOC_BFIN_FUNCDESC_VALUE
3359 ENUMX
3360   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3361 ENUMX
3362   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3363 ENUMX
3364   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3365 ENUMX
3366   BFD_RELOC_BFIN_GOTOFF17M4
3367 ENUMX
3368   BFD_RELOC_BFIN_GOTOFFHI
3369 ENUMX
3370   BFD_RELOC_BFIN_GOTOFFLO
3371 ENUMDOC
3372   ADI Blackfin FD-PIC relocations.
3373 ENUM
3374   BFD_RELOC_BFIN_GOT
3375 ENUMDOC
3376   ADI Blackfin GOT relocation.
3377 ENUM
3378   BFD_RELOC_BFIN_PLTPC
3379 ENUMDOC
3380   ADI Blackfin PLTPC relocation.
3381 ENUM
3382   BFD_ARELOC_BFIN_PUSH
3383 ENUMDOC
3384   ADI Blackfin arithmetic relocation.
3385 ENUM
3386   BFD_ARELOC_BFIN_CONST
3387 ENUMDOC
3388   ADI Blackfin arithmetic relocation.
3389 ENUM
3390   BFD_ARELOC_BFIN_ADD
3391 ENUMDOC
3392   ADI Blackfin arithmetic relocation.
3393 ENUM
3394   BFD_ARELOC_BFIN_SUB
3395 ENUMDOC
3396   ADI Blackfin arithmetic relocation.
3397 ENUM
3398   BFD_ARELOC_BFIN_MULT
3399 ENUMDOC
3400   ADI Blackfin arithmetic relocation.
3401 ENUM
3402   BFD_ARELOC_BFIN_DIV
3403 ENUMDOC
3404   ADI Blackfin arithmetic relocation.
3405 ENUM
3406   BFD_ARELOC_BFIN_MOD
3407 ENUMDOC
3408   ADI Blackfin arithmetic relocation.
3409 ENUM
3410   BFD_ARELOC_BFIN_LSHIFT
3411 ENUMDOC
3412   ADI Blackfin arithmetic relocation.
3413 ENUM
3414   BFD_ARELOC_BFIN_RSHIFT
3415 ENUMDOC
3416   ADI Blackfin arithmetic relocation.
3417 ENUM
3418   BFD_ARELOC_BFIN_AND
3419 ENUMDOC
3420   ADI Blackfin arithmetic relocation.
3421 ENUM
3422   BFD_ARELOC_BFIN_OR
3423 ENUMDOC
3424   ADI Blackfin arithmetic relocation.
3425 ENUM
3426   BFD_ARELOC_BFIN_XOR
3427 ENUMDOC
3428   ADI Blackfin arithmetic relocation.
3429 ENUM
3430   BFD_ARELOC_BFIN_LAND
3431 ENUMDOC
3432   ADI Blackfin arithmetic relocation.
3433 ENUM
3434   BFD_ARELOC_BFIN_LOR
3435 ENUMDOC
3436   ADI Blackfin arithmetic relocation.
3437 ENUM
3438   BFD_ARELOC_BFIN_LEN
3439 ENUMDOC
3440   ADI Blackfin arithmetic relocation.
3441 ENUM
3442   BFD_ARELOC_BFIN_NEG
3443 ENUMDOC
3444   ADI Blackfin arithmetic relocation.
3445 ENUM
3446   BFD_ARELOC_BFIN_COMP
3447 ENUMDOC
3448   ADI Blackfin arithmetic relocation.
3449 ENUM
3450   BFD_ARELOC_BFIN_PAGE
3451 ENUMDOC
3452   ADI Blackfin arithmetic relocation.
3453 ENUM
3454   BFD_ARELOC_BFIN_HWPAGE
3455 ENUMDOC
3456   ADI Blackfin arithmetic relocation.
3457 ENUM
3458   BFD_ARELOC_BFIN_ADDR
3459 ENUMDOC
3460   ADI Blackfin arithmetic relocation.
3461
3462 ENUM
3463   BFD_RELOC_D10V_10_PCREL_R
3464 ENUMDOC
3465   Mitsubishi D10V relocs.
3466   This is a 10-bit reloc with the right 2 bits
3467   assumed to be 0.
3468 ENUM
3469   BFD_RELOC_D10V_10_PCREL_L
3470 ENUMDOC
3471   Mitsubishi D10V relocs.
3472   This is a 10-bit reloc with the right 2 bits
3473   assumed to be 0.  This is the same as the previous reloc
3474   except it is in the left container, i.e.,
3475   shifted left 15 bits.
3476 ENUM
3477   BFD_RELOC_D10V_18
3478 ENUMDOC
3479   This is an 18-bit reloc with the right 2 bits
3480   assumed to be 0.
3481 ENUM
3482   BFD_RELOC_D10V_18_PCREL
3483 ENUMDOC
3484   This is an 18-bit reloc with the right 2 bits
3485   assumed to be 0.
3486
3487 ENUM
3488   BFD_RELOC_D30V_6
3489 ENUMDOC
3490   Mitsubishi D30V relocs.
3491   This is a 6-bit absolute reloc.
3492 ENUM
3493   BFD_RELOC_D30V_9_PCREL
3494 ENUMDOC
3495   This is a 6-bit pc-relative reloc with
3496   the right 3 bits assumed to be 0.
3497 ENUM
3498   BFD_RELOC_D30V_9_PCREL_R
3499 ENUMDOC
3500   This is a 6-bit pc-relative reloc with
3501   the right 3 bits assumed to be 0. Same
3502   as the previous reloc but on the right side
3503   of the container.
3504 ENUM
3505   BFD_RELOC_D30V_15
3506 ENUMDOC
3507   This is a 12-bit absolute reloc with the
3508   right 3 bitsassumed to be 0.
3509 ENUM
3510   BFD_RELOC_D30V_15_PCREL
3511 ENUMDOC
3512   This is a 12-bit pc-relative reloc with
3513   the right 3 bits assumed to be 0.
3514 ENUM
3515   BFD_RELOC_D30V_15_PCREL_R
3516 ENUMDOC
3517   This is a 12-bit pc-relative reloc with
3518   the right 3 bits assumed to be 0. Same
3519   as the previous reloc but on the right side
3520   of the container.
3521 ENUM
3522   BFD_RELOC_D30V_21
3523 ENUMDOC
3524   This is an 18-bit absolute reloc with
3525   the right 3 bits assumed to be 0.
3526 ENUM
3527   BFD_RELOC_D30V_21_PCREL
3528 ENUMDOC
3529   This is an 18-bit pc-relative reloc with
3530   the right 3 bits assumed to be 0.
3531 ENUM
3532   BFD_RELOC_D30V_21_PCREL_R
3533 ENUMDOC
3534   This is an 18-bit pc-relative reloc with
3535   the right 3 bits assumed to be 0. Same
3536   as the previous reloc but on the right side
3537   of the container.
3538 ENUM
3539   BFD_RELOC_D30V_32
3540 ENUMDOC
3541   This is a 32-bit absolute reloc.
3542 ENUM
3543   BFD_RELOC_D30V_32_PCREL
3544 ENUMDOC
3545   This is a 32-bit pc-relative reloc.
3546
3547 ENUM
3548   BFD_RELOC_DLX_HI16_S
3549 ENUMDOC
3550   DLX relocs
3551 ENUM
3552   BFD_RELOC_DLX_LO16
3553 ENUMDOC
3554   DLX relocs
3555 ENUM
3556   BFD_RELOC_DLX_JMP26
3557 ENUMDOC
3558   DLX relocs
3559
3560 ENUM
3561   BFD_RELOC_M32C_HI8
3562 ENUMX
3563   BFD_RELOC_M32C_RL_JUMP
3564 ENUMX
3565   BFD_RELOC_M32C_RL_1ADDR
3566 ENUMX
3567   BFD_RELOC_M32C_RL_2ADDR
3568 ENUMDOC
3569   Renesas M16C/M32C Relocations.
3570
3571 ENUM
3572   BFD_RELOC_M32R_24
3573 ENUMDOC
3574   Renesas M32R (formerly Mitsubishi M32R) relocs.
3575   This is a 24 bit absolute address.
3576 ENUM
3577   BFD_RELOC_M32R_10_PCREL
3578 ENUMDOC
3579   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3580 ENUM
3581   BFD_RELOC_M32R_18_PCREL
3582 ENUMDOC
3583   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3584 ENUM
3585   BFD_RELOC_M32R_26_PCREL
3586 ENUMDOC
3587   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3588 ENUM
3589   BFD_RELOC_M32R_HI16_ULO
3590 ENUMDOC
3591   This is a 16-bit reloc containing the high 16 bits of an address
3592   used when the lower 16 bits are treated as unsigned.
3593 ENUM
3594   BFD_RELOC_M32R_HI16_SLO
3595 ENUMDOC
3596   This is a 16-bit reloc containing the high 16 bits of an address
3597   used when the lower 16 bits are treated as signed.
3598 ENUM
3599   BFD_RELOC_M32R_LO16
3600 ENUMDOC
3601   This is a 16-bit reloc containing the lower 16 bits of an address.
3602 ENUM
3603   BFD_RELOC_M32R_SDA16
3604 ENUMDOC
3605   This is a 16-bit reloc containing the small data area offset for use in
3606   add3, load, and store instructions.
3607 ENUM
3608   BFD_RELOC_M32R_GOT24
3609 ENUMX
3610   BFD_RELOC_M32R_26_PLTREL
3611 ENUMX
3612   BFD_RELOC_M32R_COPY
3613 ENUMX
3614   BFD_RELOC_M32R_GLOB_DAT
3615 ENUMX
3616   BFD_RELOC_M32R_JMP_SLOT
3617 ENUMX
3618   BFD_RELOC_M32R_RELATIVE
3619 ENUMX
3620   BFD_RELOC_M32R_GOTOFF
3621 ENUMX
3622   BFD_RELOC_M32R_GOTOFF_HI_ULO
3623 ENUMX
3624   BFD_RELOC_M32R_GOTOFF_HI_SLO
3625 ENUMX
3626   BFD_RELOC_M32R_GOTOFF_LO
3627 ENUMX
3628   BFD_RELOC_M32R_GOTPC24
3629 ENUMX
3630   BFD_RELOC_M32R_GOT16_HI_ULO
3631 ENUMX
3632   BFD_RELOC_M32R_GOT16_HI_SLO
3633 ENUMX
3634   BFD_RELOC_M32R_GOT16_LO
3635 ENUMX
3636   BFD_RELOC_M32R_GOTPC_HI_ULO
3637 ENUMX
3638   BFD_RELOC_M32R_GOTPC_HI_SLO
3639 ENUMX
3640   BFD_RELOC_M32R_GOTPC_LO
3641 ENUMDOC
3642   For PIC.
3643
3644
3645 ENUM
3646   BFD_RELOC_V850_9_PCREL
3647 ENUMDOC
3648   This is a 9-bit reloc
3649 ENUM
3650   BFD_RELOC_V850_22_PCREL
3651 ENUMDOC
3652   This is a 22-bit reloc
3653
3654 ENUM
3655   BFD_RELOC_V850_SDA_16_16_OFFSET
3656 ENUMDOC
3657   This is a 16 bit offset from the short data area pointer.
3658 ENUM
3659   BFD_RELOC_V850_SDA_15_16_OFFSET
3660 ENUMDOC
3661   This is a 16 bit offset (of which only 15 bits are used) from the
3662   short data area pointer.
3663 ENUM
3664   BFD_RELOC_V850_ZDA_16_16_OFFSET
3665 ENUMDOC
3666   This is a 16 bit offset from the zero data area pointer.
3667 ENUM
3668   BFD_RELOC_V850_ZDA_15_16_OFFSET
3669 ENUMDOC
3670   This is a 16 bit offset (of which only 15 bits are used) from the
3671   zero data area pointer.
3672 ENUM
3673   BFD_RELOC_V850_TDA_6_8_OFFSET
3674 ENUMDOC
3675   This is an 8 bit offset (of which only 6 bits are used) from the
3676   tiny data area pointer.
3677 ENUM
3678   BFD_RELOC_V850_TDA_7_8_OFFSET
3679 ENUMDOC
3680   This is an 8bit offset (of which only 7 bits are used) from the tiny
3681   data area pointer.
3682 ENUM
3683   BFD_RELOC_V850_TDA_7_7_OFFSET
3684 ENUMDOC
3685   This is a 7 bit offset from the tiny data area pointer.
3686 ENUM
3687   BFD_RELOC_V850_TDA_16_16_OFFSET
3688 ENUMDOC
3689   This is a 16 bit offset from the tiny data area pointer.
3690 COMMENT
3691 ENUM
3692   BFD_RELOC_V850_TDA_4_5_OFFSET
3693 ENUMDOC
3694   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3695   data area pointer.
3696 ENUM
3697   BFD_RELOC_V850_TDA_4_4_OFFSET
3698 ENUMDOC
3699   This is a 4 bit offset from the tiny data area pointer.
3700 ENUM
3701   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3702 ENUMDOC
3703   This is a 16 bit offset from the short data area pointer, with the
3704   bits placed non-contiguously in the instruction.
3705 ENUM
3706   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3707 ENUMDOC
3708   This is a 16 bit offset from the zero data area pointer, with the
3709   bits placed non-contiguously in the instruction.
3710 ENUM
3711   BFD_RELOC_V850_CALLT_6_7_OFFSET
3712 ENUMDOC
3713   This is a 6 bit offset from the call table base pointer.
3714 ENUM
3715   BFD_RELOC_V850_CALLT_16_16_OFFSET
3716 ENUMDOC
3717   This is a 16 bit offset from the call table base pointer.
3718 ENUM
3719   BFD_RELOC_V850_LONGCALL
3720 ENUMDOC
3721   Used for relaxing indirect function calls.
3722 ENUM
3723   BFD_RELOC_V850_LONGJUMP
3724 ENUMDOC
3725   Used for relaxing indirect jumps.
3726 ENUM
3727   BFD_RELOC_V850_ALIGN
3728 ENUMDOC
3729   Used to maintain alignment whilst relaxing.
3730 ENUM
3731   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3732 ENUMDOC
3733   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3734   instructions.
3735 ENUM
3736   BFD_RELOC_V850_16_PCREL
3737 ENUMDOC
3738   This is a 16-bit reloc.
3739 ENUM
3740   BFD_RELOC_V850_17_PCREL
3741 ENUMDOC
3742   This is a 17-bit reloc.
3743 ENUM
3744   BFD_RELOC_V850_23
3745 ENUMDOC
3746   This is a 23-bit reloc.
3747 ENUM
3748   BFD_RELOC_V850_32_PCREL
3749 ENUMDOC
3750   This is a 32-bit reloc.
3751 ENUM
3752   BFD_RELOC_V850_32_ABS
3753 ENUMDOC
3754   This is a 32-bit reloc.
3755 ENUM
3756   BFD_RELOC_V850_16_SPLIT_OFFSET
3757 ENUMDOC
3758   This is a 16-bit reloc.
3759 ENUM
3760   BFD_RELOC_V850_16_S1
3761 ENUMDOC
3762   This is a 16-bit reloc.
3763 ENUM
3764   BFD_RELOC_V850_LO16_S1
3765 ENUMDOC
3766   Low 16 bits. 16 bit shifted by 1.
3767 ENUM
3768   BFD_RELOC_V850_CALLT_15_16_OFFSET
3769 ENUMDOC
3770   This is a 16 bit offset from the call table base pointer.
3771 ENUM
3772   BFD_RELOC_V850_32_GOTPCREL
3773 ENUMDOC
3774   DSO relocations.
3775 ENUM
3776   BFD_RELOC_V850_16_GOT
3777 ENUMDOC
3778   DSO relocations.
3779 ENUM
3780   BFD_RELOC_V850_32_GOT
3781 ENUMDOC
3782   DSO relocations.
3783 ENUM
3784   BFD_RELOC_V850_22_PLT_PCREL
3785 ENUMDOC
3786   DSO relocations.
3787 ENUM
3788   BFD_RELOC_V850_32_PLT_PCREL
3789 ENUMDOC
3790   DSO relocations.
3791 ENUM
3792   BFD_RELOC_V850_COPY
3793 ENUMDOC
3794   DSO relocations.
3795 ENUM
3796   BFD_RELOC_V850_GLOB_DAT
3797 ENUMDOC
3798   DSO relocations.
3799 ENUM
3800   BFD_RELOC_V850_JMP_SLOT
3801 ENUMDOC
3802   DSO relocations.
3803 ENUM
3804   BFD_RELOC_V850_RELATIVE
3805 ENUMDOC
3806   DSO relocations.
3807 ENUM
3808   BFD_RELOC_V850_16_GOTOFF
3809 ENUMDOC
3810   DSO relocations.
3811 ENUM
3812   BFD_RELOC_V850_32_GOTOFF
3813 ENUMDOC
3814   DSO relocations.
3815 ENUM
3816   BFD_RELOC_V850_CODE
3817 ENUMDOC
3818   start code.
3819 ENUM
3820   BFD_RELOC_V850_DATA
3821 ENUMDOC
3822   start data in text.
3823 ENUM
3824   BFD_RELOC_MN10300_32_PCREL
3825 ENUMDOC
3826   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3827   instruction.
3828 ENUM
3829   BFD_RELOC_MN10300_16_PCREL
3830 ENUMDOC
3831   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3832   instruction.
3833
3834 ENUM
3835   BFD_RELOC_TIC30_LDP
3836 ENUMDOC
3837   This is a 8bit DP reloc for the tms320c30, where the most
3838   significant 8 bits of a 24 bit word are placed into the least
3839   significant 8 bits of the opcode.
3840
3841 ENUM
3842   BFD_RELOC_TIC54X_PARTLS7
3843 ENUMDOC
3844   This is a 7bit reloc for the tms320c54x, where the least
3845   significant 7 bits of a 16 bit word are placed into the least
3846   significant 7 bits of the opcode.
3847
3848 ENUM
3849   BFD_RELOC_TIC54X_PARTMS9
3850 ENUMDOC
3851   This is a 9bit DP reloc for the tms320c54x, where the most
3852   significant 9 bits of a 16 bit word are placed into the least
3853   significant 9 bits of the opcode.
3854
3855 ENUM
3856   BFD_RELOC_TIC54X_23
3857 ENUMDOC
3858   This is an extended address 23-bit reloc for the tms320c54x.
3859
3860 ENUM
3861   BFD_RELOC_TIC54X_16_OF_23
3862 ENUMDOC
3863   This is a 16-bit reloc for the tms320c54x, where the least
3864   significant 16 bits of a 23-bit extended address are placed into
3865   the opcode.
3866
3867 ENUM
3868   BFD_RELOC_TIC54X_MS7_OF_23
3869 ENUMDOC
3870   This is a reloc for the tms320c54x, where the most
3871   significant 7 bits of a 23-bit extended address are placed into
3872   the opcode.
3873
3874 ENUM
3875   BFD_RELOC_C6000_PCR_S21
3876 ENUMX
3877   BFD_RELOC_C6000_PCR_S12
3878 ENUMX
3879   BFD_RELOC_C6000_PCR_S10
3880 ENUMX
3881   BFD_RELOC_C6000_PCR_S7
3882 ENUMX
3883   BFD_RELOC_C6000_ABS_S16
3884 ENUMX
3885   BFD_RELOC_C6000_ABS_L16
3886 ENUMX
3887   BFD_RELOC_C6000_ABS_H16
3888 ENUMX
3889   BFD_RELOC_C6000_SBR_U15_B
3890 ENUMX
3891   BFD_RELOC_C6000_SBR_U15_H
3892 ENUMX
3893   BFD_RELOC_C6000_SBR_U15_W
3894 ENUMX
3895   BFD_RELOC_C6000_SBR_S16
3896 ENUMX
3897   BFD_RELOC_C6000_SBR_L16_B
3898 ENUMX
3899   BFD_RELOC_C6000_SBR_L16_H
3900 ENUMX
3901   BFD_RELOC_C6000_SBR_L16_W
3902 ENUMX
3903   BFD_RELOC_C6000_SBR_H16_B
3904 ENUMX
3905   BFD_RELOC_C6000_SBR_H16_H
3906 ENUMX
3907   BFD_RELOC_C6000_SBR_H16_W
3908 ENUMX
3909   BFD_RELOC_C6000_SBR_GOT_U15_W
3910 ENUMX
3911   BFD_RELOC_C6000_SBR_GOT_L16_W
3912 ENUMX
3913   BFD_RELOC_C6000_SBR_GOT_H16_W
3914 ENUMX
3915   BFD_RELOC_C6000_DSBT_INDEX
3916 ENUMX
3917   BFD_RELOC_C6000_PREL31
3918 ENUMX
3919   BFD_RELOC_C6000_COPY
3920 ENUMX
3921   BFD_RELOC_C6000_ALIGN
3922 ENUMX
3923   BFD_RELOC_C6000_FPHEAD
3924 ENUMX
3925   BFD_RELOC_C6000_NOCMP
3926 ENUMDOC
3927   TMS320C6000 relocations.
3928
3929 ENUM
3930   BFD_RELOC_FR30_48
3931 ENUMDOC
3932   This is a 48 bit reloc for the FR30 that stores 32 bits.
3933 ENUM
3934   BFD_RELOC_FR30_20
3935 ENUMDOC
3936   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3937   two sections.
3938 ENUM
3939   BFD_RELOC_FR30_6_IN_4
3940 ENUMDOC
3941   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3942   4 bits.
3943 ENUM
3944   BFD_RELOC_FR30_8_IN_8
3945 ENUMDOC
3946   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3947   into 8 bits.
3948 ENUM
3949   BFD_RELOC_FR30_9_IN_8
3950 ENUMDOC
3951   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3952   into 8 bits.
3953 ENUM
3954   BFD_RELOC_FR30_10_IN_8
3955 ENUMDOC
3956   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3957   into 8 bits.
3958 ENUM
3959   BFD_RELOC_FR30_9_PCREL
3960 ENUMDOC
3961   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3962   short offset into 8 bits.
3963 ENUM
3964   BFD_RELOC_FR30_12_PCREL
3965 ENUMDOC
3966   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3967   short offset into 11 bits.
3968
3969 ENUM
3970   BFD_RELOC_MCORE_PCREL_IMM8BY4
3971 ENUMX
3972   BFD_RELOC_MCORE_PCREL_IMM11BY2
3973 ENUMX
3974   BFD_RELOC_MCORE_PCREL_IMM4BY2
3975 ENUMX
3976   BFD_RELOC_MCORE_PCREL_32
3977 ENUMX
3978   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3979 ENUMX
3980   BFD_RELOC_MCORE_RVA
3981 ENUMDOC
3982   Motorola Mcore relocations.
3983
3984 ENUM
3985   BFD_RELOC_MEP_8
3986 ENUMX
3987   BFD_RELOC_MEP_16
3988 ENUMX
3989   BFD_RELOC_MEP_32
3990 ENUMX
3991   BFD_RELOC_MEP_PCREL8A2
3992 ENUMX
3993   BFD_RELOC_MEP_PCREL12A2
3994 ENUMX
3995   BFD_RELOC_MEP_PCREL17A2
3996 ENUMX
3997   BFD_RELOC_MEP_PCREL24A2
3998 ENUMX
3999   BFD_RELOC_MEP_PCABS24A2
4000 ENUMX
4001   BFD_RELOC_MEP_LOW16
4002 ENUMX
4003   BFD_RELOC_MEP_HI16U
4004 ENUMX
4005   BFD_RELOC_MEP_HI16S
4006 ENUMX
4007   BFD_RELOC_MEP_GPREL
4008 ENUMX
4009   BFD_RELOC_MEP_TPREL
4010 ENUMX
4011   BFD_RELOC_MEP_TPREL7
4012 ENUMX
4013   BFD_RELOC_MEP_TPREL7A2
4014 ENUMX
4015   BFD_RELOC_MEP_TPREL7A4
4016 ENUMX
4017   BFD_RELOC_MEP_UIMM24
4018 ENUMX
4019   BFD_RELOC_MEP_ADDR24A4
4020 ENUMX
4021   BFD_RELOC_MEP_GNU_VTINHERIT
4022 ENUMX
4023   BFD_RELOC_MEP_GNU_VTENTRY
4024 ENUMDOC
4025   Toshiba Media Processor Relocations.
4026 COMMENT
4027
4028 ENUM
4029   BFD_RELOC_MMIX_GETA
4030 ENUMX
4031   BFD_RELOC_MMIX_GETA_1
4032 ENUMX
4033   BFD_RELOC_MMIX_GETA_2
4034 ENUMX
4035   BFD_RELOC_MMIX_GETA_3
4036 ENUMDOC
4037   These are relocations for the GETA instruction.
4038 ENUM
4039   BFD_RELOC_MMIX_CBRANCH
4040 ENUMX
4041   BFD_RELOC_MMIX_CBRANCH_J
4042 ENUMX
4043   BFD_RELOC_MMIX_CBRANCH_1
4044 ENUMX
4045   BFD_RELOC_MMIX_CBRANCH_2
4046 ENUMX
4047   BFD_RELOC_MMIX_CBRANCH_3
4048 ENUMDOC
4049   These are relocations for a conditional branch instruction.
4050 ENUM
4051   BFD_RELOC_MMIX_PUSHJ
4052 ENUMX
4053   BFD_RELOC_MMIX_PUSHJ_1
4054 ENUMX
4055   BFD_RELOC_MMIX_PUSHJ_2
4056 ENUMX
4057   BFD_RELOC_MMIX_PUSHJ_3
4058 ENUMX
4059   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4060 ENUMDOC
4061   These are relocations for the PUSHJ instruction.
4062 ENUM
4063   BFD_RELOC_MMIX_JMP
4064 ENUMX
4065   BFD_RELOC_MMIX_JMP_1
4066 ENUMX
4067   BFD_RELOC_MMIX_JMP_2
4068 ENUMX
4069   BFD_RELOC_MMIX_JMP_3
4070 ENUMDOC
4071   These are relocations for the JMP instruction.
4072 ENUM
4073   BFD_RELOC_MMIX_ADDR19
4074 ENUMDOC
4075   This is a relocation for a relative address as in a GETA instruction or
4076   a branch.
4077 ENUM
4078   BFD_RELOC_MMIX_ADDR27
4079 ENUMDOC
4080   This is a relocation for a relative address as in a JMP instruction.
4081 ENUM
4082   BFD_RELOC_MMIX_REG_OR_BYTE
4083 ENUMDOC
4084   This is a relocation for an instruction field that may be a general
4085   register or a value 0..255.
4086 ENUM
4087   BFD_RELOC_MMIX_REG
4088 ENUMDOC
4089   This is a relocation for an instruction field that may be a general
4090   register.
4091 ENUM
4092   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4093 ENUMDOC
4094   This is a relocation for two instruction fields holding a register and
4095   an offset, the equivalent of the relocation.
4096 ENUM
4097   BFD_RELOC_MMIX_LOCAL
4098 ENUMDOC
4099   This relocation is an assertion that the expression is not allocated as
4100   a global register.  It does not modify contents.
4101
4102 ENUM
4103   BFD_RELOC_AVR_7_PCREL
4104 ENUMDOC
4105   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4106   short offset into 7 bits.
4107 ENUM
4108   BFD_RELOC_AVR_13_PCREL
4109 ENUMDOC
4110   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4111   short offset into 12 bits.
4112 ENUM
4113   BFD_RELOC_AVR_16_PM
4114 ENUMDOC
4115   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4116   program memory address) into 16 bits.
4117 ENUM
4118   BFD_RELOC_AVR_LO8_LDI
4119 ENUMDOC
4120   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4121   data memory address) into 8 bit immediate value of LDI insn.
4122 ENUM
4123   BFD_RELOC_AVR_HI8_LDI
4124 ENUMDOC
4125   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4126   of data memory address) into 8 bit immediate value of LDI insn.
4127 ENUM
4128   BFD_RELOC_AVR_HH8_LDI
4129 ENUMDOC
4130   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4131   of program memory address) into 8 bit immediate value of LDI insn.
4132 ENUM
4133   BFD_RELOC_AVR_MS8_LDI
4134 ENUMDOC
4135   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4136   of 32 bit value) into 8 bit immediate value of LDI insn.
4137 ENUM
4138   BFD_RELOC_AVR_LO8_LDI_NEG
4139 ENUMDOC
4140   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4141   (usually data memory address) into 8 bit immediate value of SUBI insn.
4142 ENUM
4143   BFD_RELOC_AVR_HI8_LDI_NEG
4144 ENUMDOC
4145   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4146   (high 8 bit of data memory address) into 8 bit immediate value of
4147   SUBI insn.
4148 ENUM
4149   BFD_RELOC_AVR_HH8_LDI_NEG
4150 ENUMDOC
4151   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4152   (most high 8 bit of program memory address) into 8 bit immediate value
4153   of LDI or SUBI insn.
4154 ENUM
4155   BFD_RELOC_AVR_MS8_LDI_NEG
4156 ENUMDOC
4157   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4158   of 32 bit value) into 8 bit immediate value of LDI insn.
4159 ENUM
4160   BFD_RELOC_AVR_LO8_LDI_PM
4161 ENUMDOC
4162   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4163   command address) into 8 bit immediate value of LDI insn.
4164 ENUM
4165   BFD_RELOC_AVR_LO8_LDI_GS
4166 ENUMDOC
4167   This is a 16 bit reloc for the AVR that stores 8 bit value
4168   (command address) into 8 bit immediate value of LDI insn. If the address
4169   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4170   in the lower 128k.
4171 ENUM
4172   BFD_RELOC_AVR_HI8_LDI_PM
4173 ENUMDOC
4174   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4175   of command address) into 8 bit immediate value of LDI insn.
4176 ENUM
4177   BFD_RELOC_AVR_HI8_LDI_GS
4178 ENUMDOC
4179   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4180   of command address) into 8 bit immediate value of LDI insn.  If the address
4181   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4182   below 128k.
4183 ENUM
4184   BFD_RELOC_AVR_HH8_LDI_PM
4185 ENUMDOC
4186   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4187   of command address) into 8 bit immediate value of LDI insn.
4188 ENUM
4189   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4190 ENUMDOC
4191   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4192   (usually command address) into 8 bit immediate value of SUBI insn.
4193 ENUM
4194   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4195 ENUMDOC
4196   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4197   (high 8 bit of 16 bit command address) into 8 bit immediate value
4198   of SUBI insn.
4199 ENUM
4200   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4201 ENUMDOC
4202   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4203   (high 6 bit of 22 bit command address) into 8 bit immediate
4204   value of SUBI insn.
4205 ENUM
4206   BFD_RELOC_AVR_CALL
4207 ENUMDOC
4208   This is a 32 bit reloc for the AVR that stores 23 bit value
4209   into 22 bits.
4210 ENUM
4211   BFD_RELOC_AVR_LDI
4212 ENUMDOC
4213   This is a 16 bit reloc for the AVR that stores all needed bits
4214   for absolute addressing with ldi with overflow check to linktime
4215 ENUM
4216   BFD_RELOC_AVR_6
4217 ENUMDOC
4218   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4219   instructions
4220 ENUM
4221   BFD_RELOC_AVR_6_ADIW
4222 ENUMDOC
4223   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4224   instructions
4225
4226 ENUM
4227   BFD_RELOC_RX_NEG8
4228 ENUMX
4229   BFD_RELOC_RX_NEG16
4230 ENUMX
4231   BFD_RELOC_RX_NEG24
4232 ENUMX
4233   BFD_RELOC_RX_NEG32
4234 ENUMX
4235   BFD_RELOC_RX_16_OP
4236 ENUMX
4237   BFD_RELOC_RX_24_OP
4238 ENUMX
4239   BFD_RELOC_RX_32_OP
4240 ENUMX
4241   BFD_RELOC_RX_8U
4242 ENUMX
4243   BFD_RELOC_RX_16U
4244 ENUMX
4245   BFD_RELOC_RX_24U
4246 ENUMX
4247   BFD_RELOC_RX_DIR3U_PCREL
4248 ENUMX
4249   BFD_RELOC_RX_DIFF
4250 ENUMX
4251   BFD_RELOC_RX_GPRELB
4252 ENUMX
4253   BFD_RELOC_RX_GPRELW
4254 ENUMX
4255   BFD_RELOC_RX_GPRELL
4256 ENUMX
4257   BFD_RELOC_RX_SYM
4258 ENUMX
4259   BFD_RELOC_RX_OP_SUBTRACT
4260 ENUMX
4261   BFD_RELOC_RX_ABS8
4262 ENUMX
4263   BFD_RELOC_RX_ABS16
4264 ENUMX
4265   BFD_RELOC_RX_ABS32
4266 ENUMX
4267   BFD_RELOC_RX_ABS16U
4268 ENUMX
4269   BFD_RELOC_RX_ABS16UW
4270 ENUMX
4271   BFD_RELOC_RX_ABS16UL
4272 ENUMX
4273   BFD_RELOC_RX_RELAX
4274 ENUMDOC
4275   Renesas RX Relocations.
4276
4277 ENUM
4278   BFD_RELOC_390_12
4279 ENUMDOC
4280    Direct 12 bit.
4281 ENUM
4282   BFD_RELOC_390_GOT12
4283 ENUMDOC
4284   12 bit GOT offset.
4285 ENUM
4286   BFD_RELOC_390_PLT32
4287 ENUMDOC
4288   32 bit PC relative PLT address.
4289 ENUM
4290   BFD_RELOC_390_COPY
4291 ENUMDOC
4292   Copy symbol at runtime.
4293 ENUM
4294   BFD_RELOC_390_GLOB_DAT
4295 ENUMDOC
4296   Create GOT entry.
4297 ENUM
4298   BFD_RELOC_390_JMP_SLOT
4299 ENUMDOC
4300   Create PLT entry.
4301 ENUM
4302   BFD_RELOC_390_RELATIVE
4303 ENUMDOC
4304   Adjust by program base.
4305 ENUM
4306   BFD_RELOC_390_GOTPC
4307 ENUMDOC
4308   32 bit PC relative offset to GOT.
4309 ENUM
4310   BFD_RELOC_390_GOT16
4311 ENUMDOC
4312   16 bit GOT offset.
4313 ENUM
4314   BFD_RELOC_390_PC16DBL
4315 ENUMDOC
4316   PC relative 16 bit shifted by 1.
4317 ENUM
4318   BFD_RELOC_390_PLT16DBL
4319 ENUMDOC
4320   16 bit PC rel. PLT shifted by 1.
4321 ENUM
4322   BFD_RELOC_390_PC32DBL
4323 ENUMDOC
4324   PC relative 32 bit shifted by 1.
4325 ENUM
4326   BFD_RELOC_390_PLT32DBL
4327 ENUMDOC
4328   32 bit PC rel. PLT shifted by 1.
4329 ENUM
4330   BFD_RELOC_390_GOTPCDBL
4331 ENUMDOC
4332   32 bit PC rel. GOT shifted by 1.
4333 ENUM
4334   BFD_RELOC_390_GOT64
4335 ENUMDOC
4336   64 bit GOT offset.
4337 ENUM
4338   BFD_RELOC_390_PLT64
4339 ENUMDOC
4340   64 bit PC relative PLT address.
4341 ENUM
4342   BFD_RELOC_390_GOTENT
4343 ENUMDOC
4344   32 bit rel. offset to GOT entry.
4345 ENUM
4346   BFD_RELOC_390_GOTOFF64
4347 ENUMDOC
4348   64 bit offset to GOT.
4349 ENUM
4350   BFD_RELOC_390_GOTPLT12
4351 ENUMDOC
4352   12-bit offset to symbol-entry within GOT, with PLT handling.
4353 ENUM
4354   BFD_RELOC_390_GOTPLT16
4355 ENUMDOC
4356   16-bit offset to symbol-entry within GOT, with PLT handling.
4357 ENUM
4358   BFD_RELOC_390_GOTPLT32
4359 ENUMDOC
4360   32-bit offset to symbol-entry within GOT, with PLT handling.
4361 ENUM
4362   BFD_RELOC_390_GOTPLT64
4363 ENUMDOC
4364   64-bit offset to symbol-entry within GOT, with PLT handling.
4365 ENUM
4366   BFD_RELOC_390_GOTPLTENT
4367 ENUMDOC
4368   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4369 ENUM
4370   BFD_RELOC_390_PLTOFF16
4371 ENUMDOC
4372   16-bit rel. offset from the GOT to a PLT entry.
4373 ENUM
4374   BFD_RELOC_390_PLTOFF32
4375 ENUMDOC
4376   32-bit rel. offset from the GOT to a PLT entry.
4377 ENUM
4378   BFD_RELOC_390_PLTOFF64
4379 ENUMDOC
4380   64-bit rel. offset from the GOT to a PLT entry.
4381
4382 ENUM
4383   BFD_RELOC_390_TLS_LOAD
4384 ENUMX
4385   BFD_RELOC_390_TLS_GDCALL
4386 ENUMX
4387   BFD_RELOC_390_TLS_LDCALL
4388 ENUMX
4389   BFD_RELOC_390_TLS_GD32
4390 ENUMX
4391   BFD_RELOC_390_TLS_GD64
4392 ENUMX
4393   BFD_RELOC_390_TLS_GOTIE12
4394 ENUMX
4395   BFD_RELOC_390_TLS_GOTIE32
4396 ENUMX
4397   BFD_RELOC_390_TLS_GOTIE64
4398 ENUMX
4399   BFD_RELOC_390_TLS_LDM32
4400 ENUMX
4401   BFD_RELOC_390_TLS_LDM64
4402 ENUMX
4403   BFD_RELOC_390_TLS_IE32
4404 ENUMX
4405   BFD_RELOC_390_TLS_IE64
4406 ENUMX
4407   BFD_RELOC_390_TLS_IEENT
4408 ENUMX
4409   BFD_RELOC_390_TLS_LE32
4410 ENUMX
4411   BFD_RELOC_390_TLS_LE64
4412 ENUMX
4413   BFD_RELOC_390_TLS_LDO32
4414 ENUMX
4415   BFD_RELOC_390_TLS_LDO64
4416 ENUMX
4417   BFD_RELOC_390_TLS_DTPMOD
4418 ENUMX
4419   BFD_RELOC_390_TLS_DTPOFF
4420 ENUMX
4421   BFD_RELOC_390_TLS_TPOFF
4422 ENUMDOC
4423   s390 tls relocations.
4424
4425 ENUM
4426   BFD_RELOC_390_20
4427 ENUMX
4428   BFD_RELOC_390_GOT20
4429 ENUMX
4430   BFD_RELOC_390_GOTPLT20
4431 ENUMX
4432   BFD_RELOC_390_TLS_GOTIE20
4433 ENUMDOC
4434   Long displacement extension.
4435
4436 ENUM
4437   BFD_RELOC_SCORE_GPREL15
4438 ENUMDOC
4439   Score relocations
4440   Low 16 bit for load/store
4441 ENUM
4442   BFD_RELOC_SCORE_DUMMY2
4443 ENUMX
4444   BFD_RELOC_SCORE_JMP
4445 ENUMDOC
4446   This is a 24-bit reloc with the right 1 bit assumed to be 0
4447 ENUM
4448   BFD_RELOC_SCORE_BRANCH
4449 ENUMDOC
4450   This is a 19-bit reloc with the right 1 bit assumed to be 0
4451 ENUM
4452   BFD_RELOC_SCORE_IMM30
4453 ENUMDOC
4454   This is a 32-bit reloc for 48-bit instructions.
4455 ENUM
4456   BFD_RELOC_SCORE_IMM32
4457 ENUMDOC
4458   This is a 32-bit reloc for 48-bit instructions.
4459 ENUM
4460   BFD_RELOC_SCORE16_JMP
4461 ENUMDOC
4462   This is a 11-bit reloc with the right 1 bit assumed to be 0
4463 ENUM
4464   BFD_RELOC_SCORE16_BRANCH
4465 ENUMDOC
4466   This is a 8-bit reloc with the right 1 bit assumed to be 0
4467 ENUM
4468   BFD_RELOC_SCORE_BCMP
4469 ENUMDOC
4470    This is a 9-bit reloc with the right 1 bit assumed to be 0
4471 ENUM
4472   BFD_RELOC_SCORE_GOT15
4473 ENUMX
4474   BFD_RELOC_SCORE_GOT_LO16
4475 ENUMX
4476   BFD_RELOC_SCORE_CALL15
4477 ENUMX
4478   BFD_RELOC_SCORE_DUMMY_HI16
4479 ENUMDOC
4480   Undocumented Score relocs
4481
4482 ENUM
4483   BFD_RELOC_IP2K_FR9
4484 ENUMDOC
4485   Scenix IP2K - 9-bit register number / data address
4486 ENUM
4487   BFD_RELOC_IP2K_BANK
4488 ENUMDOC
4489   Scenix IP2K - 4-bit register/data bank number
4490 ENUM
4491   BFD_RELOC_IP2K_ADDR16CJP
4492 ENUMDOC
4493   Scenix IP2K - low 13 bits of instruction word address
4494 ENUM
4495   BFD_RELOC_IP2K_PAGE3
4496 ENUMDOC
4497   Scenix IP2K - high 3 bits of instruction word address
4498 ENUM
4499   BFD_RELOC_IP2K_LO8DATA
4500 ENUMX
4501   BFD_RELOC_IP2K_HI8DATA
4502 ENUMX
4503   BFD_RELOC_IP2K_EX8DATA
4504 ENUMDOC
4505   Scenix IP2K - ext/low/high 8 bits of data address
4506 ENUM
4507   BFD_RELOC_IP2K_LO8INSN
4508 ENUMX
4509   BFD_RELOC_IP2K_HI8INSN
4510 ENUMDOC
4511   Scenix IP2K - low/high 8 bits of instruction word address
4512 ENUM
4513   BFD_RELOC_IP2K_PC_SKIP
4514 ENUMDOC
4515   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4516 ENUM
4517   BFD_RELOC_IP2K_TEXT
4518 ENUMDOC
4519   Scenix IP2K - 16 bit word address in text section.
4520 ENUM
4521   BFD_RELOC_IP2K_FR_OFFSET
4522 ENUMDOC
4523   Scenix IP2K - 7-bit sp or dp offset
4524 ENUM
4525   BFD_RELOC_VPE4KMATH_DATA
4526 ENUMX
4527   BFD_RELOC_VPE4KMATH_INSN
4528 ENUMDOC
4529   Scenix VPE4K coprocessor - data/insn-space addressing
4530
4531 ENUM
4532   BFD_RELOC_VTABLE_INHERIT
4533 ENUMX
4534   BFD_RELOC_VTABLE_ENTRY
4535 ENUMDOC
4536   These two relocations are used by the linker to determine which of
4537   the entries in a C++ virtual function table are actually used.  When
4538   the --gc-sections option is given, the linker will zero out the entries
4539   that are not used, so that the code for those functions need not be
4540   included in the output.
4541
4542   VTABLE_INHERIT is a zero-space relocation used to describe to the
4543   linker the inheritance tree of a C++ virtual function table.  The
4544   relocation's symbol should be the parent class' vtable, and the
4545   relocation should be located at the child vtable.
4546
4547   VTABLE_ENTRY is a zero-space relocation that describes the use of a
4548   virtual function table entry.  The reloc's symbol should refer to the
4549   table of the class mentioned in the code.  Off of that base, an offset
4550   describes the entry that is being used.  For Rela hosts, this offset
4551   is stored in the reloc's addend.  For Rel hosts, we are forced to put
4552   this offset in the reloc's section offset.
4553
4554 ENUM
4555   BFD_RELOC_IA64_IMM14
4556 ENUMX
4557   BFD_RELOC_IA64_IMM22
4558 ENUMX
4559   BFD_RELOC_IA64_IMM64
4560 ENUMX
4561   BFD_RELOC_IA64_DIR32MSB
4562 ENUMX
4563   BFD_RELOC_IA64_DIR32LSB
4564 ENUMX
4565   BFD_RELOC_IA64_DIR64MSB
4566 ENUMX
4567   BFD_RELOC_IA64_DIR64LSB
4568 ENUMX
4569   BFD_RELOC_IA64_GPREL22
4570 ENUMX
4571   BFD_RELOC_IA64_GPREL64I
4572 ENUMX
4573   BFD_RELOC_IA64_GPREL32MSB
4574 ENUMX
4575   BFD_RELOC_IA64_GPREL32LSB
4576 ENUMX
4577   BFD_RELOC_IA64_GPREL64MSB
4578 ENUMX
4579   BFD_RELOC_IA64_GPREL64LSB
4580 ENUMX
4581   BFD_RELOC_IA64_LTOFF22
4582 ENUMX
4583   BFD_RELOC_IA64_LTOFF64I
4584 ENUMX
4585   BFD_RELOC_IA64_PLTOFF22
4586 ENUMX
4587   BFD_RELOC_IA64_PLTOFF64I
4588 ENUMX
4589   BFD_RELOC_IA64_PLTOFF64MSB
4590 ENUMX
4591   BFD_RELOC_IA64_PLTOFF64LSB
4592 ENUMX
4593   BFD_RELOC_IA64_FPTR64I
4594 ENUMX
4595   BFD_RELOC_IA64_FPTR32MSB
4596 ENUMX
4597   BFD_RELOC_IA64_FPTR32LSB
4598 ENUMX
4599   BFD_RELOC_IA64_FPTR64MSB
4600 ENUMX
4601   BFD_RELOC_IA64_FPTR64LSB
4602 ENUMX
4603   BFD_RELOC_IA64_PCREL21B
4604 ENUMX
4605   BFD_RELOC_IA64_PCREL21BI
4606 ENUMX
4607   BFD_RELOC_IA64_PCREL21M
4608 ENUMX
4609   BFD_RELOC_IA64_PCREL21F
4610 ENUMX
4611   BFD_RELOC_IA64_PCREL22
4612 ENUMX
4613   BFD_RELOC_IA64_PCREL60B
4614 ENUMX
4615   BFD_RELOC_IA64_PCREL64I
4616 ENUMX
4617   BFD_RELOC_IA64_PCREL32MSB
4618 ENUMX
4619   BFD_RELOC_IA64_PCREL32LSB
4620 ENUMX
4621   BFD_RELOC_IA64_PCREL64MSB
4622 ENUMX
4623   BFD_RELOC_IA64_PCREL64LSB
4624 ENUMX
4625   BFD_RELOC_IA64_LTOFF_FPTR22
4626 ENUMX
4627   BFD_RELOC_IA64_LTOFF_FPTR64I
4628 ENUMX
4629   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4630 ENUMX
4631   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4632 ENUMX
4633   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4634 ENUMX
4635   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4636 ENUMX
4637   BFD_RELOC_IA64_SEGREL32MSB
4638 ENUMX
4639   BFD_RELOC_IA64_SEGREL32LSB
4640 ENUMX
4641   BFD_RELOC_IA64_SEGREL64MSB
4642 ENUMX
4643   BFD_RELOC_IA64_SEGREL64LSB
4644 ENUMX
4645   BFD_RELOC_IA64_SECREL32MSB
4646 ENUMX
4647   BFD_RELOC_IA64_SECREL32LSB
4648 ENUMX
4649   BFD_RELOC_IA64_SECREL64MSB
4650 ENUMX
4651   BFD_RELOC_IA64_SECREL64LSB
4652 ENUMX
4653   BFD_RELOC_IA64_REL32MSB
4654 ENUMX
4655   BFD_RELOC_IA64_REL32LSB
4656 ENUMX
4657   BFD_RELOC_IA64_REL64MSB
4658 ENUMX
4659   BFD_RELOC_IA64_REL64LSB
4660 ENUMX
4661   BFD_RELOC_IA64_LTV32MSB
4662 ENUMX
4663   BFD_RELOC_IA64_LTV32LSB
4664 ENUMX
4665   BFD_RELOC_IA64_LTV64MSB
4666 ENUMX
4667   BFD_RELOC_IA64_LTV64LSB
4668 ENUMX
4669   BFD_RELOC_IA64_IPLTMSB
4670 ENUMX
4671   BFD_RELOC_IA64_IPLTLSB
4672 ENUMX
4673   BFD_RELOC_IA64_COPY
4674 ENUMX
4675   BFD_RELOC_IA64_LTOFF22X
4676 ENUMX
4677   BFD_RELOC_IA64_LDXMOV
4678 ENUMX
4679   BFD_RELOC_IA64_TPREL14
4680 ENUMX
4681   BFD_RELOC_IA64_TPREL22
4682 ENUMX
4683   BFD_RELOC_IA64_TPREL64I
4684 ENUMX
4685   BFD_RELOC_IA64_TPREL64MSB
4686 ENUMX
4687   BFD_RELOC_IA64_TPREL64LSB
4688 ENUMX
4689   BFD_RELOC_IA64_LTOFF_TPREL22
4690 ENUMX
4691   BFD_RELOC_IA64_DTPMOD64MSB
4692 ENUMX
4693   BFD_RELOC_IA64_DTPMOD64LSB
4694 ENUMX
4695   BFD_RELOC_IA64_LTOFF_DTPMOD22
4696 ENUMX
4697   BFD_RELOC_IA64_DTPREL14
4698 ENUMX
4699   BFD_RELOC_IA64_DTPREL22
4700 ENUMX
4701   BFD_RELOC_IA64_DTPREL64I
4702 ENUMX
4703   BFD_RELOC_IA64_DTPREL32MSB
4704 ENUMX
4705   BFD_RELOC_IA64_DTPREL32LSB
4706 ENUMX
4707   BFD_RELOC_IA64_DTPREL64MSB
4708 ENUMX
4709   BFD_RELOC_IA64_DTPREL64LSB
4710 ENUMX
4711   BFD_RELOC_IA64_LTOFF_DTPREL22
4712 ENUMDOC
4713   Intel IA64 Relocations.
4714
4715 ENUM
4716   BFD_RELOC_M68HC11_HI8
4717 ENUMDOC
4718   Motorola 68HC11 reloc.
4719   This is the 8 bit high part of an absolute address.
4720 ENUM
4721   BFD_RELOC_M68HC11_LO8
4722 ENUMDOC
4723   Motorola 68HC11 reloc.
4724   This is the 8 bit low part of an absolute address.
4725 ENUM
4726   BFD_RELOC_M68HC11_3B
4727 ENUMDOC
4728   Motorola 68HC11 reloc.
4729   This is the 3 bit of a value.
4730 ENUM
4731   BFD_RELOC_M68HC11_RL_JUMP
4732 ENUMDOC
4733   Motorola 68HC11 reloc.
4734   This reloc marks the beginning of a jump/call instruction.
4735   It is used for linker relaxation to correctly identify beginning
4736   of instruction and change some branches to use PC-relative
4737   addressing mode.
4738 ENUM
4739   BFD_RELOC_M68HC11_RL_GROUP
4740 ENUMDOC
4741   Motorola 68HC11 reloc.
4742   This reloc marks a group of several instructions that gcc generates
4743   and for which the linker relaxation pass can modify and/or remove
4744   some of them.
4745 ENUM
4746   BFD_RELOC_M68HC11_LO16
4747 ENUMDOC
4748   Motorola 68HC11 reloc.
4749   This is the 16-bit lower part of an address.  It is used for 'call'
4750   instruction to specify the symbol address without any special
4751   transformation (due to memory bank window).
4752 ENUM
4753   BFD_RELOC_M68HC11_PAGE
4754 ENUMDOC
4755   Motorola 68HC11 reloc.
4756   This is a 8-bit reloc that specifies the page number of an address.
4757   It is used by 'call' instruction to specify the page number of
4758   the symbol.
4759 ENUM
4760   BFD_RELOC_M68HC11_24
4761 ENUMDOC
4762   Motorola 68HC11 reloc.
4763   This is a 24-bit reloc that represents the address with a 16-bit
4764   value and a 8-bit page number.  The symbol address is transformed
4765   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4766 ENUM
4767   BFD_RELOC_M68HC12_5B
4768 ENUMDOC
4769   Motorola 68HC12 reloc.
4770   This is the 5 bits of a value.
4771
4772 ENUM
4773   BFD_RELOC_16C_NUM08
4774 ENUMX
4775   BFD_RELOC_16C_NUM08_C
4776 ENUMX
4777   BFD_RELOC_16C_NUM16
4778 ENUMX
4779   BFD_RELOC_16C_NUM16_C
4780 ENUMX
4781   BFD_RELOC_16C_NUM32
4782 ENUMX
4783   BFD_RELOC_16C_NUM32_C
4784 ENUMX
4785   BFD_RELOC_16C_DISP04
4786 ENUMX
4787   BFD_RELOC_16C_DISP04_C
4788 ENUMX
4789   BFD_RELOC_16C_DISP08
4790 ENUMX
4791   BFD_RELOC_16C_DISP08_C
4792 ENUMX
4793   BFD_RELOC_16C_DISP16
4794 ENUMX
4795   BFD_RELOC_16C_DISP16_C
4796 ENUMX
4797   BFD_RELOC_16C_DISP24
4798 ENUMX
4799   BFD_RELOC_16C_DISP24_C
4800 ENUMX
4801   BFD_RELOC_16C_DISP24a
4802 ENUMX
4803   BFD_RELOC_16C_DISP24a_C
4804 ENUMX
4805   BFD_RELOC_16C_REG04
4806 ENUMX
4807   BFD_RELOC_16C_REG04_C
4808 ENUMX
4809   BFD_RELOC_16C_REG04a
4810 ENUMX
4811   BFD_RELOC_16C_REG04a_C
4812 ENUMX
4813   BFD_RELOC_16C_REG14
4814 ENUMX
4815   BFD_RELOC_16C_REG14_C
4816 ENUMX
4817   BFD_RELOC_16C_REG16
4818 ENUMX
4819   BFD_RELOC_16C_REG16_C
4820 ENUMX
4821   BFD_RELOC_16C_REG20
4822 ENUMX
4823   BFD_RELOC_16C_REG20_C
4824 ENUMX
4825   BFD_RELOC_16C_ABS20
4826 ENUMX
4827   BFD_RELOC_16C_ABS20_C
4828 ENUMX
4829   BFD_RELOC_16C_ABS24
4830 ENUMX
4831   BFD_RELOC_16C_ABS24_C
4832 ENUMX
4833   BFD_RELOC_16C_IMM04
4834 ENUMX
4835   BFD_RELOC_16C_IMM04_C
4836 ENUMX
4837   BFD_RELOC_16C_IMM16
4838 ENUMX
4839   BFD_RELOC_16C_IMM16_C
4840 ENUMX
4841   BFD_RELOC_16C_IMM20
4842 ENUMX
4843   BFD_RELOC_16C_IMM20_C
4844 ENUMX
4845   BFD_RELOC_16C_IMM24
4846 ENUMX
4847   BFD_RELOC_16C_IMM24_C
4848 ENUMX
4849   BFD_RELOC_16C_IMM32
4850 ENUMX
4851   BFD_RELOC_16C_IMM32_C
4852 ENUMDOC
4853   NS CR16C Relocations.
4854
4855 ENUM
4856   BFD_RELOC_CR16_NUM8
4857 ENUMX
4858   BFD_RELOC_CR16_NUM16
4859 ENUMX
4860   BFD_RELOC_CR16_NUM32
4861 ENUMX
4862   BFD_RELOC_CR16_NUM32a
4863 ENUMX
4864   BFD_RELOC_CR16_REGREL0
4865 ENUMX
4866   BFD_RELOC_CR16_REGREL4
4867 ENUMX
4868   BFD_RELOC_CR16_REGREL4a
4869 ENUMX
4870   BFD_RELOC_CR16_REGREL14
4871 ENUMX
4872   BFD_RELOC_CR16_REGREL14a
4873 ENUMX
4874   BFD_RELOC_CR16_REGREL16
4875 ENUMX
4876   BFD_RELOC_CR16_REGREL20
4877 ENUMX
4878   BFD_RELOC_CR16_REGREL20a
4879 ENUMX
4880   BFD_RELOC_CR16_ABS20
4881 ENUMX
4882   BFD_RELOC_CR16_ABS24
4883 ENUMX
4884   BFD_RELOC_CR16_IMM4
4885 ENUMX
4886   BFD_RELOC_CR16_IMM8
4887 ENUMX
4888   BFD_RELOC_CR16_IMM16
4889 ENUMX
4890   BFD_RELOC_CR16_IMM20
4891 ENUMX
4892   BFD_RELOC_CR16_IMM24
4893 ENUMX
4894   BFD_RELOC_CR16_IMM32
4895 ENUMX
4896   BFD_RELOC_CR16_IMM32a
4897 ENUMX
4898   BFD_RELOC_CR16_DISP4
4899 ENUMX
4900   BFD_RELOC_CR16_DISP8
4901 ENUMX
4902   BFD_RELOC_CR16_DISP16
4903 ENUMX
4904   BFD_RELOC_CR16_DISP20
4905 ENUMX
4906   BFD_RELOC_CR16_DISP24
4907 ENUMX
4908   BFD_RELOC_CR16_DISP24a
4909 ENUMX
4910   BFD_RELOC_CR16_SWITCH8
4911 ENUMX
4912   BFD_RELOC_CR16_SWITCH16
4913 ENUMX
4914   BFD_RELOC_CR16_SWITCH32
4915 ENUMX
4916   BFD_RELOC_CR16_GOT_REGREL20
4917 ENUMX
4918   BFD_RELOC_CR16_GOTC_REGREL20
4919 ENUMX
4920   BFD_RELOC_CR16_GLOB_DAT
4921 ENUMDOC
4922   NS CR16 Relocations.
4923
4924 ENUM
4925   BFD_RELOC_CRX_REL4
4926 ENUMX
4927   BFD_RELOC_CRX_REL8
4928 ENUMX
4929   BFD_RELOC_CRX_REL8_CMP
4930 ENUMX
4931   BFD_RELOC_CRX_REL16
4932 ENUMX
4933   BFD_RELOC_CRX_REL24
4934 ENUMX
4935   BFD_RELOC_CRX_REL32
4936 ENUMX
4937   BFD_RELOC_CRX_REGREL12
4938 ENUMX
4939   BFD_RELOC_CRX_REGREL22
4940 ENUMX
4941   BFD_RELOC_CRX_REGREL28
4942 ENUMX
4943   BFD_RELOC_CRX_REGREL32
4944 ENUMX
4945   BFD_RELOC_CRX_ABS16
4946 ENUMX
4947   BFD_RELOC_CRX_ABS32
4948 ENUMX
4949   BFD_RELOC_CRX_NUM8
4950 ENUMX
4951   BFD_RELOC_CRX_NUM16
4952 ENUMX
4953   BFD_RELOC_CRX_NUM32
4954 ENUMX
4955   BFD_RELOC_CRX_IMM16
4956 ENUMX
4957   BFD_RELOC_CRX_IMM32
4958 ENUMX
4959   BFD_RELOC_CRX_SWITCH8
4960 ENUMX
4961   BFD_RELOC_CRX_SWITCH16
4962 ENUMX
4963   BFD_RELOC_CRX_SWITCH32
4964 ENUMDOC
4965   NS CRX Relocations.
4966
4967 ENUM
4968   BFD_RELOC_CRIS_BDISP8
4969 ENUMX
4970   BFD_RELOC_CRIS_UNSIGNED_5
4971 ENUMX
4972   BFD_RELOC_CRIS_SIGNED_6
4973 ENUMX
4974   BFD_RELOC_CRIS_UNSIGNED_6
4975 ENUMX
4976   BFD_RELOC_CRIS_SIGNED_8
4977 ENUMX
4978   BFD_RELOC_CRIS_UNSIGNED_8
4979 ENUMX
4980   BFD_RELOC_CRIS_SIGNED_16
4981 ENUMX
4982   BFD_RELOC_CRIS_UNSIGNED_16
4983 ENUMX
4984   BFD_RELOC_CRIS_LAPCQ_OFFSET
4985 ENUMX
4986   BFD_RELOC_CRIS_UNSIGNED_4
4987 ENUMDOC
4988   These relocs are only used within the CRIS assembler.  They are not
4989   (at present) written to any object files.
4990 ENUM
4991   BFD_RELOC_CRIS_COPY
4992 ENUMX
4993   BFD_RELOC_CRIS_GLOB_DAT
4994 ENUMX
4995   BFD_RELOC_CRIS_JUMP_SLOT
4996 ENUMX
4997   BFD_RELOC_CRIS_RELATIVE
4998 ENUMDOC
4999   Relocs used in ELF shared libraries for CRIS.
5000 ENUM
5001   BFD_RELOC_CRIS_32_GOT
5002 ENUMDOC
5003   32-bit offset to symbol-entry within GOT.
5004 ENUM
5005   BFD_RELOC_CRIS_16_GOT
5006 ENUMDOC
5007   16-bit offset to symbol-entry within GOT.
5008 ENUM
5009   BFD_RELOC_CRIS_32_GOTPLT
5010 ENUMDOC
5011   32-bit offset to symbol-entry within GOT, with PLT handling.
5012 ENUM
5013   BFD_RELOC_CRIS_16_GOTPLT
5014 ENUMDOC
5015   16-bit offset to symbol-entry within GOT, with PLT handling.
5016 ENUM
5017   BFD_RELOC_CRIS_32_GOTREL
5018 ENUMDOC
5019   32-bit offset to symbol, relative to GOT.
5020 ENUM
5021   BFD_RELOC_CRIS_32_PLT_GOTREL
5022 ENUMDOC
5023   32-bit offset to symbol with PLT entry, relative to GOT.
5024 ENUM
5025   BFD_RELOC_CRIS_32_PLT_PCREL
5026 ENUMDOC
5027   32-bit offset to symbol with PLT entry, relative to this relocation.
5028
5029 ENUM
5030   BFD_RELOC_CRIS_32_GOT_GD
5031 ENUMX
5032   BFD_RELOC_CRIS_16_GOT_GD
5033 ENUMX
5034   BFD_RELOC_CRIS_32_GD
5035 ENUMX
5036   BFD_RELOC_CRIS_DTP
5037 ENUMX
5038   BFD_RELOC_CRIS_32_DTPREL
5039 ENUMX
5040   BFD_RELOC_CRIS_16_DTPREL
5041 ENUMX
5042   BFD_RELOC_CRIS_32_GOT_TPREL
5043 ENUMX
5044   BFD_RELOC_CRIS_16_GOT_TPREL
5045 ENUMX
5046   BFD_RELOC_CRIS_32_TPREL
5047 ENUMX
5048   BFD_RELOC_CRIS_16_TPREL
5049 ENUMX
5050   BFD_RELOC_CRIS_DTPMOD
5051 ENUMX
5052   BFD_RELOC_CRIS_32_IE
5053 ENUMDOC
5054   Relocs used in TLS code for CRIS.
5055
5056 ENUM
5057   BFD_RELOC_860_COPY
5058 ENUMX
5059   BFD_RELOC_860_GLOB_DAT
5060 ENUMX
5061   BFD_RELOC_860_JUMP_SLOT
5062 ENUMX
5063   BFD_RELOC_860_RELATIVE
5064 ENUMX
5065   BFD_RELOC_860_PC26
5066 ENUMX
5067   BFD_RELOC_860_PLT26
5068 ENUMX
5069   BFD_RELOC_860_PC16
5070 ENUMX
5071   BFD_RELOC_860_LOW0
5072 ENUMX
5073   BFD_RELOC_860_SPLIT0
5074 ENUMX
5075   BFD_RELOC_860_LOW1
5076 ENUMX
5077   BFD_RELOC_860_SPLIT1
5078 ENUMX
5079   BFD_RELOC_860_LOW2
5080 ENUMX
5081   BFD_RELOC_860_SPLIT2
5082 ENUMX
5083   BFD_RELOC_860_LOW3
5084 ENUMX
5085   BFD_RELOC_860_LOGOT0
5086 ENUMX
5087   BFD_RELOC_860_SPGOT0
5088 ENUMX
5089   BFD_RELOC_860_LOGOT1
5090 ENUMX
5091   BFD_RELOC_860_SPGOT1
5092 ENUMX
5093   BFD_RELOC_860_LOGOTOFF0
5094 ENUMX
5095   BFD_RELOC_860_SPGOTOFF0
5096 ENUMX
5097   BFD_RELOC_860_LOGOTOFF1
5098 ENUMX
5099   BFD_RELOC_860_SPGOTOFF1
5100 ENUMX
5101   BFD_RELOC_860_LOGOTOFF2
5102 ENUMX
5103   BFD_RELOC_860_LOGOTOFF3
5104 ENUMX
5105   BFD_RELOC_860_LOPC
5106 ENUMX
5107   BFD_RELOC_860_HIGHADJ
5108 ENUMX
5109   BFD_RELOC_860_HAGOT
5110 ENUMX
5111   BFD_RELOC_860_HAGOTOFF
5112 ENUMX
5113   BFD_RELOC_860_HAPC
5114 ENUMX
5115   BFD_RELOC_860_HIGH
5116 ENUMX
5117   BFD_RELOC_860_HIGOT
5118 ENUMX
5119   BFD_RELOC_860_HIGOTOFF
5120 ENUMDOC
5121   Intel i860 Relocations.
5122
5123 ENUM
5124   BFD_RELOC_OPENRISC_ABS_26
5125 ENUMX
5126   BFD_RELOC_OPENRISC_REL_26
5127 ENUMDOC
5128   OpenRISC Relocations.
5129
5130 ENUM
5131   BFD_RELOC_H8_DIR16A8
5132 ENUMX
5133   BFD_RELOC_H8_DIR16R8
5134 ENUMX
5135   BFD_RELOC_H8_DIR24A8
5136 ENUMX
5137   BFD_RELOC_H8_DIR24R8
5138 ENUMX
5139   BFD_RELOC_H8_DIR32A16
5140 ENUMDOC
5141   H8 elf Relocations.
5142
5143 ENUM
5144   BFD_RELOC_XSTORMY16_REL_12
5145 ENUMX
5146   BFD_RELOC_XSTORMY16_12
5147 ENUMX
5148   BFD_RELOC_XSTORMY16_24
5149 ENUMX
5150   BFD_RELOC_XSTORMY16_FPTR16
5151 ENUMDOC
5152   Sony Xstormy16 Relocations.
5153
5154 ENUM
5155   BFD_RELOC_RELC
5156 ENUMDOC
5157   Self-describing complex relocations.
5158 COMMENT
5159
5160 ENUM
5161   BFD_RELOC_XC16X_PAG
5162 ENUMX
5163   BFD_RELOC_XC16X_POF
5164 ENUMX
5165   BFD_RELOC_XC16X_SEG
5166 ENUMX
5167   BFD_RELOC_XC16X_SOF
5168 ENUMDOC
5169   Infineon Relocations.
5170
5171 ENUM
5172   BFD_RELOC_VAX_GLOB_DAT
5173 ENUMX
5174   BFD_RELOC_VAX_JMP_SLOT
5175 ENUMX
5176   BFD_RELOC_VAX_RELATIVE
5177 ENUMDOC
5178   Relocations used by VAX ELF.
5179
5180 ENUM
5181   BFD_RELOC_MT_PC16
5182 ENUMDOC
5183   Morpho MT - 16 bit immediate relocation.
5184 ENUM
5185   BFD_RELOC_MT_HI16
5186 ENUMDOC
5187   Morpho MT - Hi 16 bits of an address.
5188 ENUM
5189   BFD_RELOC_MT_LO16
5190 ENUMDOC
5191   Morpho MT - Low 16 bits of an address.
5192 ENUM
5193   BFD_RELOC_MT_GNU_VTINHERIT
5194 ENUMDOC
5195   Morpho MT - Used to tell the linker which vtable entries are used.
5196 ENUM
5197   BFD_RELOC_MT_GNU_VTENTRY
5198 ENUMDOC
5199   Morpho MT - Used to tell the linker which vtable entries are used.
5200 ENUM
5201   BFD_RELOC_MT_PCINSN8
5202 ENUMDOC
5203   Morpho MT - 8 bit immediate relocation.
5204
5205 ENUM
5206   BFD_RELOC_MSP430_10_PCREL
5207 ENUMX
5208   BFD_RELOC_MSP430_16_PCREL
5209 ENUMX
5210   BFD_RELOC_MSP430_16
5211 ENUMX
5212   BFD_RELOC_MSP430_16_PCREL_BYTE
5213 ENUMX
5214   BFD_RELOC_MSP430_16_BYTE
5215 ENUMX
5216   BFD_RELOC_MSP430_2X_PCREL
5217 ENUMX
5218   BFD_RELOC_MSP430_RL_PCREL
5219 ENUMDOC
5220   msp430 specific relocation codes
5221
5222 ENUM
5223   BFD_RELOC_IQ2000_OFFSET_16
5224 ENUMX
5225   BFD_RELOC_IQ2000_OFFSET_21
5226 ENUMX
5227   BFD_RELOC_IQ2000_UHI16
5228 ENUMDOC
5229   IQ2000 Relocations.
5230
5231 ENUM
5232   BFD_RELOC_XTENSA_RTLD
5233 ENUMDOC
5234   Special Xtensa relocation used only by PLT entries in ELF shared
5235   objects to indicate that the runtime linker should set the value
5236   to one of its own internal functions or data structures.
5237 ENUM
5238   BFD_RELOC_XTENSA_GLOB_DAT
5239 ENUMX
5240   BFD_RELOC_XTENSA_JMP_SLOT
5241 ENUMX
5242   BFD_RELOC_XTENSA_RELATIVE
5243 ENUMDOC
5244   Xtensa relocations for ELF shared objects.
5245 ENUM
5246   BFD_RELOC_XTENSA_PLT
5247 ENUMDOC
5248   Xtensa relocation used in ELF object files for symbols that may require
5249   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
5250 ENUM
5251   BFD_RELOC_XTENSA_DIFF8
5252 ENUMX
5253   BFD_RELOC_XTENSA_DIFF16
5254 ENUMX
5255   BFD_RELOC_XTENSA_DIFF32
5256 ENUMDOC
5257   Xtensa relocations to mark the difference of two local symbols.
5258   These are only needed to support linker relaxation and can be ignored
5259   when not relaxing.  The field is set to the value of the difference
5260   assuming no relaxation.  The relocation encodes the position of the
5261   first symbol so the linker can determine whether to adjust the field
5262   value.
5263 ENUM
5264   BFD_RELOC_XTENSA_SLOT0_OP
5265 ENUMX
5266   BFD_RELOC_XTENSA_SLOT1_OP
5267 ENUMX
5268   BFD_RELOC_XTENSA_SLOT2_OP
5269 ENUMX
5270   BFD_RELOC_XTENSA_SLOT3_OP
5271 ENUMX
5272   BFD_RELOC_XTENSA_SLOT4_OP
5273 ENUMX
5274   BFD_RELOC_XTENSA_SLOT5_OP
5275 ENUMX
5276   BFD_RELOC_XTENSA_SLOT6_OP
5277 ENUMX
5278   BFD_RELOC_XTENSA_SLOT7_OP
5279 ENUMX
5280   BFD_RELOC_XTENSA_SLOT8_OP
5281 ENUMX
5282   BFD_RELOC_XTENSA_SLOT9_OP
5283 ENUMX
5284   BFD_RELOC_XTENSA_SLOT10_OP
5285 ENUMX
5286   BFD_RELOC_XTENSA_SLOT11_OP
5287 ENUMX
5288   BFD_RELOC_XTENSA_SLOT12_OP
5289 ENUMX
5290   BFD_RELOC_XTENSA_SLOT13_OP
5291 ENUMX
5292   BFD_RELOC_XTENSA_SLOT14_OP
5293 ENUMDOC
5294   Generic Xtensa relocations for instruction operands.  Only the slot
5295   number is encoded in the relocation.  The relocation applies to the
5296   last PC-relative immediate operand, or if there are no PC-relative
5297   immediates, to the last immediate operand.
5298 ENUM
5299   BFD_RELOC_XTENSA_SLOT0_ALT
5300 ENUMX
5301   BFD_RELOC_XTENSA_SLOT1_ALT
5302 ENUMX
5303   BFD_RELOC_XTENSA_SLOT2_ALT
5304 ENUMX
5305   BFD_RELOC_XTENSA_SLOT3_ALT
5306 ENUMX
5307   BFD_RELOC_XTENSA_SLOT4_ALT
5308 ENUMX
5309   BFD_RELOC_XTENSA_SLOT5_ALT
5310 ENUMX
5311   BFD_RELOC_XTENSA_SLOT6_ALT
5312 ENUMX
5313   BFD_RELOC_XTENSA_SLOT7_ALT
5314 ENUMX
5315   BFD_RELOC_XTENSA_SLOT8_ALT
5316 ENUMX
5317   BFD_RELOC_XTENSA_SLOT9_ALT
5318 ENUMX
5319   BFD_RELOC_XTENSA_SLOT10_ALT
5320 ENUMX
5321   BFD_RELOC_XTENSA_SLOT11_ALT
5322 ENUMX
5323   BFD_RELOC_XTENSA_SLOT12_ALT
5324 ENUMX
5325   BFD_RELOC_XTENSA_SLOT13_ALT
5326 ENUMX
5327   BFD_RELOC_XTENSA_SLOT14_ALT
5328 ENUMDOC
5329   Alternate Xtensa relocations.  Only the slot is encoded in the
5330   relocation.  The meaning of these relocations is opcode-specific.
5331 ENUM
5332   BFD_RELOC_XTENSA_OP0
5333 ENUMX
5334   BFD_RELOC_XTENSA_OP1
5335 ENUMX
5336   BFD_RELOC_XTENSA_OP2
5337 ENUMDOC
5338   Xtensa relocations for backward compatibility.  These have all been
5339   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
5340 ENUM
5341   BFD_RELOC_XTENSA_ASM_EXPAND
5342 ENUMDOC
5343   Xtensa relocation to mark that the assembler expanded the
5344   instructions from an original target.  The expansion size is
5345   encoded in the reloc size.
5346 ENUM
5347   BFD_RELOC_XTENSA_ASM_SIMPLIFY
5348 ENUMDOC
5349   Xtensa relocation to mark that the linker should simplify
5350   assembler-expanded instructions.  This is commonly used
5351   internally by the linker after analysis of a
5352   BFD_RELOC_XTENSA_ASM_EXPAND.
5353 ENUM
5354   BFD_RELOC_XTENSA_TLSDESC_FN
5355 ENUMX
5356   BFD_RELOC_XTENSA_TLSDESC_ARG
5357 ENUMX
5358   BFD_RELOC_XTENSA_TLS_DTPOFF
5359 ENUMX
5360   BFD_RELOC_XTENSA_TLS_TPOFF
5361 ENUMX
5362   BFD_RELOC_XTENSA_TLS_FUNC
5363 ENUMX
5364   BFD_RELOC_XTENSA_TLS_ARG
5365 ENUMX
5366   BFD_RELOC_XTENSA_TLS_CALL
5367 ENUMDOC
5368   Xtensa TLS relocations.
5369
5370 ENUM
5371   BFD_RELOC_Z80_DISP8
5372 ENUMDOC
5373   8 bit signed offset in (ix+d) or (iy+d).
5374
5375 ENUM
5376   BFD_RELOC_Z8K_DISP7
5377 ENUMDOC
5378   DJNZ offset.
5379 ENUM
5380   BFD_RELOC_Z8K_CALLR
5381 ENUMDOC
5382   CALR offset.
5383 ENUM
5384   BFD_RELOC_Z8K_IMM4L
5385 ENUMDOC
5386   4 bit value.
5387
5388 ENUM
5389    BFD_RELOC_LM32_CALL
5390 ENUMX
5391    BFD_RELOC_LM32_BRANCH
5392 ENUMX
5393    BFD_RELOC_LM32_16_GOT
5394 ENUMX
5395    BFD_RELOC_LM32_GOTOFF_HI16
5396 ENUMX
5397    BFD_RELOC_LM32_GOTOFF_LO16
5398 ENUMX
5399    BFD_RELOC_LM32_COPY
5400 ENUMX
5401    BFD_RELOC_LM32_GLOB_DAT
5402 ENUMX
5403    BFD_RELOC_LM32_JMP_SLOT
5404 ENUMX
5405    BFD_RELOC_LM32_RELATIVE
5406 ENUMDOC
5407  Lattice Mico32 relocations.
5408
5409 ENUM
5410   BFD_RELOC_MACH_O_SECTDIFF
5411 ENUMDOC
5412   Difference between two section addreses.  Must be followed by a
5413   BFD_RELOC_MACH_O_PAIR.
5414 ENUM
5415   BFD_RELOC_MACH_O_PAIR
5416 ENUMDOC
5417   Pair of relocation.  Contains the first symbol.
5418
5419 ENUM
5420   BFD_RELOC_MACH_O_X86_64_BRANCH32
5421 ENUMX
5422   BFD_RELOC_MACH_O_X86_64_BRANCH8
5423 ENUMDOC
5424   PCREL relocations.  They are marked as branch to create PLT entry if
5425   required.
5426 ENUM
5427   BFD_RELOC_MACH_O_X86_64_GOT
5428 ENUMDOC
5429   Used when referencing a GOT entry.
5430 ENUM
5431   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
5432 ENUMDOC
5433   Used when loading a GOT entry with movq.  It is specially marked so that
5434   the linker could optimize the movq to a leaq if possible.
5435 ENUM
5436   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
5437 ENUMDOC
5438   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
5439 ENUM
5440   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
5441 ENUMDOC
5442   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
5443 ENUM
5444   BFD_RELOC_MACH_O_X86_64_PCREL32_1
5445 ENUMDOC
5446   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
5447 ENUM
5448   BFD_RELOC_MACH_O_X86_64_PCREL32_2
5449 ENUMDOC
5450   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
5451 ENUM
5452   BFD_RELOC_MACH_O_X86_64_PCREL32_4
5453 ENUMDOC
5454   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
5455
5456 ENUM
5457   BFD_RELOC_MICROBLAZE_32_LO
5458 ENUMDOC
5459   This is a 32 bit reloc for the microblaze that stores the
5460   low 16 bits of a value
5461 ENUM
5462   BFD_RELOC_MICROBLAZE_32_LO_PCREL
5463 ENUMDOC
5464   This is a 32 bit pc-relative reloc for the microblaze that
5465   stores the low 16 bits of a value
5466 ENUM
5467   BFD_RELOC_MICROBLAZE_32_ROSDA
5468 ENUMDOC
5469   This is a 32 bit reloc for the microblaze that stores a
5470   value relative to the read-only small data area anchor
5471 ENUM
5472   BFD_RELOC_MICROBLAZE_32_RWSDA
5473 ENUMDOC
5474   This is a 32 bit reloc for the microblaze that stores a
5475   value relative to the read-write small data area anchor
5476 ENUM
5477   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
5478 ENUMDOC
5479   This is a 32 bit reloc for the microblaze to handle
5480   expressions of the form "Symbol Op Symbol"
5481 ENUM
5482   BFD_RELOC_MICROBLAZE_64_NONE
5483 ENUMDOC
5484   This is a 64 bit reloc that stores the 32 bit pc relative
5485   value in two words (with an imm instruction).  No relocation is
5486   done here - only used for relaxing
5487 ENUM
5488   BFD_RELOC_MICROBLAZE_64_GOTPC
5489 ENUMDOC
5490   This is a 64 bit reloc that stores the 32 bit pc relative
5491   value in two words (with an imm instruction).  The relocation is
5492   PC-relative GOT offset
5493 ENUM
5494   BFD_RELOC_MICROBLAZE_64_GOT
5495 ENUMDOC
5496   This is a 64 bit reloc that stores the 32 bit pc relative
5497   value in two words (with an imm instruction).  The relocation is
5498   GOT offset
5499 ENUM
5500   BFD_RELOC_MICROBLAZE_64_PLT
5501 ENUMDOC
5502   This is a 64 bit reloc that stores the 32 bit pc relative
5503   value in two words (with an imm instruction).  The relocation is
5504   PC-relative offset into PLT
5505 ENUM
5506   BFD_RELOC_MICROBLAZE_64_GOTOFF
5507 ENUMDOC
5508   This is a 64 bit reloc that stores the 32 bit GOT relative
5509   value in two words (with an imm instruction).  The relocation is
5510   relative offset from _GLOBAL_OFFSET_TABLE_
5511 ENUM
5512   BFD_RELOC_MICROBLAZE_32_GOTOFF
5513 ENUMDOC
5514   This is a 32 bit reloc that stores the 32 bit GOT relative
5515   value in a word.  The relocation is relative offset from
5516   _GLOBAL_OFFSET_TABLE_
5517 ENUM
5518   BFD_RELOC_MICROBLAZE_COPY
5519 ENUMDOC
5520   This is used to tell the dynamic linker to copy the value out of
5521   the dynamic object into the runtime process image.
5522
5523
5524 ENDSENUM
5525   BFD_RELOC_UNUSED
5526 CODE_FRAGMENT
5527 .
5528 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
5529 */
5530
5531 /*
5532 FUNCTION
5533         bfd_reloc_type_lookup
5534         bfd_reloc_name_lookup
5535
5536 SYNOPSIS
5537         reloc_howto_type *bfd_reloc_type_lookup
5538           (bfd *abfd, bfd_reloc_code_real_type code);
5539         reloc_howto_type *bfd_reloc_name_lookup
5540           (bfd *abfd, const char *reloc_name);
5541
5542 DESCRIPTION
5543         Return a pointer to a howto structure which, when
5544         invoked, will perform the relocation @var{code} on data from the
5545         architecture noted.
5546
5547 */
5548
5549 reloc_howto_type *
5550 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5551 {
5552   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
5553 }
5554
5555 reloc_howto_type *
5556 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
5557 {
5558   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
5559 }
5560
5561 static reloc_howto_type bfd_howto_32 =
5562 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
5563
5564 /*
5565 INTERNAL_FUNCTION
5566         bfd_default_reloc_type_lookup
5567
5568 SYNOPSIS
5569         reloc_howto_type *bfd_default_reloc_type_lookup
5570           (bfd *abfd, bfd_reloc_code_real_type  code);
5571
5572 DESCRIPTION
5573         Provides a default relocation lookup routine for any architecture.
5574
5575 */
5576
5577 reloc_howto_type *
5578 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5579 {
5580   switch (code)
5581     {
5582     case BFD_RELOC_CTOR:
5583       /* The type of reloc used in a ctor, which will be as wide as the
5584          address - so either a 64, 32, or 16 bitter.  */
5585       switch (bfd_arch_bits_per_address (abfd))
5586         {
5587         case 64:
5588           BFD_FAIL ();
5589         case 32:
5590           return &bfd_howto_32;
5591         case 16:
5592           BFD_FAIL ();
5593         default:
5594           BFD_FAIL ();
5595         }
5596     default:
5597       BFD_FAIL ();
5598     }
5599   return NULL;
5600 }
5601
5602 /*
5603 FUNCTION
5604         bfd_get_reloc_code_name
5605
5606 SYNOPSIS
5607         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
5608
5609 DESCRIPTION
5610         Provides a printable name for the supplied relocation code.
5611         Useful mainly for printing error messages.
5612 */
5613
5614 const char *
5615 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
5616 {
5617   if (code > BFD_RELOC_UNUSED)
5618     return 0;
5619   return bfd_reloc_code_real_names[code];
5620 }
5621
5622 /*
5623 INTERNAL_FUNCTION
5624         bfd_generic_relax_section
5625
5626 SYNOPSIS
5627         bfd_boolean bfd_generic_relax_section
5628           (bfd *abfd,
5629            asection *section,
5630            struct bfd_link_info *,
5631            bfd_boolean *);
5632
5633 DESCRIPTION
5634         Provides default handling for relaxing for back ends which
5635         don't do relaxing.
5636 */
5637
5638 bfd_boolean
5639 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
5640                            asection *section ATTRIBUTE_UNUSED,
5641                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
5642                            bfd_boolean *again)
5643 {
5644   if (link_info->relocatable)
5645     (*link_info->callbacks->einfo)
5646       (_("%P%F: --relax and -r may not be used together\n"));
5647
5648   *again = FALSE;
5649   return TRUE;
5650 }
5651
5652 /*
5653 INTERNAL_FUNCTION
5654         bfd_generic_gc_sections
5655
5656 SYNOPSIS
5657         bfd_boolean bfd_generic_gc_sections
5658           (bfd *, struct bfd_link_info *);
5659
5660 DESCRIPTION
5661         Provides default handling for relaxing for back ends which
5662         don't do section gc -- i.e., does nothing.
5663 */
5664
5665 bfd_boolean
5666 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
5667                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
5668 {
5669   return TRUE;
5670 }
5671
5672 /*
5673 INTERNAL_FUNCTION
5674         bfd_generic_merge_sections
5675
5676 SYNOPSIS
5677         bfd_boolean bfd_generic_merge_sections
5678           (bfd *, struct bfd_link_info *);
5679
5680 DESCRIPTION
5681         Provides default handling for SEC_MERGE section merging for back ends
5682         which don't have SEC_MERGE support -- i.e., does nothing.
5683 */
5684
5685 bfd_boolean
5686 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
5687                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
5688 {
5689   return TRUE;
5690 }
5691
5692 /*
5693 INTERNAL_FUNCTION
5694         bfd_generic_get_relocated_section_contents
5695
5696 SYNOPSIS
5697         bfd_byte *bfd_generic_get_relocated_section_contents
5698           (bfd *abfd,
5699            struct bfd_link_info *link_info,
5700            struct bfd_link_order *link_order,
5701            bfd_byte *data,
5702            bfd_boolean relocatable,
5703            asymbol **symbols);
5704
5705 DESCRIPTION
5706         Provides default handling of relocation effort for back ends
5707         which can't be bothered to do it efficiently.
5708
5709 */
5710
5711 bfd_byte *
5712 bfd_generic_get_relocated_section_contents (bfd *abfd,
5713                                             struct bfd_link_info *link_info,
5714                                             struct bfd_link_order *link_order,
5715                                             bfd_byte *data,
5716                                             bfd_boolean relocatable,
5717                                             asymbol **symbols)
5718 {
5719   bfd *input_bfd = link_order->u.indirect.section->owner;
5720   asection *input_section = link_order->u.indirect.section;
5721   long reloc_size;
5722   arelent **reloc_vector;
5723   long reloc_count;
5724
5725   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
5726   if (reloc_size < 0)
5727     return NULL;
5728
5729   /* Read in the section.  */
5730   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
5731     return NULL;
5732
5733   if (reloc_size == 0)
5734     return data;
5735
5736   reloc_vector = (arelent **) bfd_malloc (reloc_size);
5737   if (reloc_vector == NULL)
5738     return NULL;
5739
5740   reloc_count = bfd_canonicalize_reloc (input_bfd,
5741                                         input_section,
5742                                         reloc_vector,
5743                                         symbols);
5744   if (reloc_count < 0)
5745     goto error_return;
5746
5747   if (reloc_count > 0)
5748     {
5749       arelent **parent;
5750       for (parent = reloc_vector; *parent != NULL; parent++)
5751         {
5752           char *error_message = NULL;
5753           asymbol *symbol;
5754           bfd_reloc_status_type r;
5755
5756           symbol = *(*parent)->sym_ptr_ptr;
5757           if (symbol->section && elf_discarded_section (symbol->section))
5758             {
5759               bfd_byte *p;
5760               static reloc_howto_type none_howto
5761                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
5762                          "unused", FALSE, 0, 0, FALSE);
5763
5764               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
5765               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
5766                                    p);
5767               (*parent)->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;
5768               (*parent)->addend = 0;
5769               (*parent)->howto = &none_howto;
5770               r = bfd_reloc_ok;
5771             }
5772           else
5773             r = bfd_perform_relocation (input_bfd,
5774                                         *parent,
5775                                         data,
5776                                         input_section,
5777                                         relocatable ? abfd : NULL,
5778                                         &error_message);
5779
5780           if (relocatable)
5781             {
5782               asection *os = input_section->output_section;
5783
5784               /* A partial link, so keep the relocs.  */
5785               os->orelocation[os->reloc_count] = *parent;
5786               os->reloc_count++;
5787             }
5788
5789           if (r != bfd_reloc_ok)
5790             {
5791               switch (r)
5792                 {
5793                 case bfd_reloc_undefined:
5794                   if (!((*link_info->callbacks->undefined_symbol)
5795                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5796                          input_bfd, input_section, (*parent)->address,
5797                          TRUE)))
5798                     goto error_return;
5799                   break;
5800                 case bfd_reloc_dangerous:
5801                   BFD_ASSERT (error_message != NULL);
5802                   if (!((*link_info->callbacks->reloc_dangerous)
5803                         (link_info, error_message, input_bfd, input_section,
5804                          (*parent)->address)))
5805                     goto error_return;
5806                   break;
5807                 case bfd_reloc_overflow:
5808                   if (!((*link_info->callbacks->reloc_overflow)
5809                         (link_info, NULL,
5810                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5811                          (*parent)->howto->name, (*parent)->addend,
5812                          input_bfd, input_section, (*parent)->address)))
5813                     goto error_return;
5814                   break;
5815                 case bfd_reloc_outofrange:
5816                 default:
5817                   abort ();
5818                   break;
5819                 }
5820
5821             }
5822         }
5823     }
5824
5825   free (reloc_vector);
5826   return data;
5827
5828 error_return:
5829   free (reloc_vector);
5830   return NULL;
5831 }