| blob | eb938bf33cbb5fdd91e4d1e5bc6e8e3f9ed9e287 |
1 2005-04-15 Maciej W. Rozycki <macro@linux-mips.org>
3 * config/tc-mips.c (normalize_constant_expr): Fix formatting.
5 2005-04-15 Jan Beulich <jbeulich@novell.com>
7 * config/obj-elf.c (obj_elf_struct): New.
8 (elf_pseudo_table). Use it for .offset and .struct.
10 2005-04-14 Bob Wilson <bob.wilson@acm.org>
11 Sterling Augustine <sterling@tensilica.com>
13 * config/tc-xtensa.c (get_aligned_diff): Handle target_size larger
14 than the section alignment.
16 2005-04-14 Bob Wilson <bob.wilson@acm.org>
17 H.J. Lu <hongjiu.lu@intel.com>
19 * config/tc-xtensa.h (struct xtensa_frag_type): Add lit_frchain field.
20 * config/tc-xtensa.c (xg_translate_sysreg_op,
21 xtensa_translate_old_userregs_ops,
22 xtensa_find_unaligned_branch_targets,
23 xtensa_find_unaligned_loops, xtensa_fix_close_loop_end_frags,
24 relax_frag_add_nop): Support 64-bit host.
25 (xtensa_mark_literal_pool_location, xtensa_move_literals): Use
26 tc_frag_data lit_frchain and lit_seg fields instead of fr_var.
28 2005-04-14 Mark Kettenis <kettenis@gnu.org>
30 * configure.tgt: Add support for OpenBSD/sparc ELF.
32 * configure.tgt: Set emulation for mips-*-openbsd*.
33 Remove broken mips-dec-openbsd* config.
34 * configure.in: Set default ABI for mips64-*-openbsd*.
35 * configure: Regenerate.
37 2005-04-14 Maciej W. Rozycki <macro@linux-mips.org>
39 * config/tc-mips.c (macro) [ldd_std]: Don't attempt the GP
40 optimization for constant addresses.
42 2005-04-14 Nick Clifton <nickc@redhat.com>
44 * as.c (main): Move parse_args before symbol_begin and frag_init
45 so that the hash table size can be set before it is used.
46 * hash.c: Use an unsigned long type for the size of the hash
47 tables.
48 * hash.h (set_gas_hash_table_size): Update the prototype.
50 2005-04-14 Alan Modra <amodra@bigpond.net.au>
52 * Makefile.am (NO_WERROR): Define. Use instead of -Wno-error.
53 * acinclude.m4: Include ../bfd/warning.m4.
54 * configure.in: Invoke AM_BINUTILS_WARNINGS.
55 * Makefile.in: Regenerate.
56 * configure: Regenerate.
57 * doc/Makefile.in: Regenerate.
59 2005-04-13 Maciej W. Rozycki <macro@linux-mips.org>
61 * config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
62 (normalize_address_expr): New function to sign-extend address
63 offsets that fit into 32 bits in 32-bit mode.
64 (macro_build_ldst_constoffset): Use normalize_address_expr()
65 instead of a handcoded sequence.
66 (load_register): Likewise. Report oversized numbers in a useful
67 way.
68 (macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
69 for constant addresses. Report oversized numbers in a useful way.
70 (mips_ip): Use normalize_address_expr() for addresses.
72 2005-04-12 Mark Kettenis <kettenis@gnu.org>
74 * config/tc-i386.c (output_insn): Handle VIA PadLock instructions
75 similar to other instructions now that they're marked as ImmExt.
77 2005-04-12 Nick Clifton <nickc@redhat.com>
79 * hash.c (DEFAULT_SIZE): Delete. Replace with:
80 (gas_hash_table_size): New static variable.
81 (set_gas_hash_table_size): New function: Records a requested size
82 for the hash tables.
83 (get_gas_hash_table_size): New function: Return a prime number
84 near the requested size of the hash table.
85 (hash_new): Use get_gas_hash_table_size.
86 * hash.h: Add a prototype for set_gas_hash_table_size.
87 * as.c (show_usage): Add description of new switches: --hash-size
88 and --reduce-memory-overheads.
89 (option_values): Add OPTION_HASH_TABLE_SIZE and
90 OPTION_REDUCE_MEMORY_OVERHEADS.
91 (std_longpopts): Add entries for the new options.
92 (parse_args): Handle the new options.
93 * Makefile.am: Add a dependency of as.c on hash.h.
94 * Makefile.in: Regenerate.
95 * doc/as.texinfo: Document the new switches.
96 * NEWS: Mention the new switches.
98 2005-04-12 Nick Clifton <nickc@redhat.com>
100 PR gas/818
101 * config/tc-hppa.c (pre_defined_registers): Fix %farg[0-3]
102 synonyms.
104 2005-04-12 Alan Modra <amodra@bigpond.net.au>
106 * Makefile.am: Run "make dep-am".
107 * Makefile.in: Regenerate.
109 2005-04-11 Sterling Augustine <sterling@tensilica.com>
110 Bob Wilson <bob.wilson@acm.org>
112 * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Fix typo.
114 2005-04-11 Mark Kettenis <kettenis@gnu.org>
116 * configure.tgt (generic_target): Add support for OpenBSD/i386 ELF.
118 2005-04-11 Jan Beulich <jbeulich@novell.com>
120 * NEWS: Mention these changes and their effects.
121 * macro.c (get_token): Use is_name_beginner/is_part_of_name/
122 is_name_ender.
123 (check_macro): Likewise.
124 (buffer_and_nest): Likewise. Permit multiple labels. Don't discard
125 labels together with the closing pseudo-op.
126 (macro_expand_body): Adjust comment. Range-check input before use.
127 Adjust mis-spelled diagnostic. Use is_name_beginner.
128 * read.c (try_macro): New.
129 (read_a_source_file): New static variable last_eol. Don't list
130 macro expansion lines more than once. Call try_macro.
131 (s_macro): Set section of line_label to absolute instead of undefined.
132 * doc/as.texinfo: Add information on the caveats of these changes.
134 2005-04-11 Alan Modra <amodra@bigpond.net.au>
136 * symbols.c (symbol_X_add_number): Change return type to "offsetT *".
137 * symbols.h (symbol_X_add_number): Update prototype.
139 2005-04-10 Eric Christopher <echristo@redhat.com>
141 * symbols.c (symbol_X_add_number): Fix warning.
143 2005-04-10 H.J. Lu <hongjiu.lu@intel.com>
145 * config/tc-m68k.c (md_begin): Support 64bit host.
146 (get_num): Support 64bit BFD on 32bit host.
148 2005-04-10 H.J. Lu <hongjiu.lu@intel.com>
150 * config/tc-mips.c (md_apply_fix3): Fix typos in BFD_RELOC_64.
152 2005-04-09 Alan Modra <amodra@bigpond.net.au>
154 * read.c (assign_symbol): Remove const from parm. Fix xcalloc
155 call. Don't do the COFF hacks for multi-emulation gas. Move
156 demand_empty_rest_of_line back to caller.
157 (s_set, equals): demand_empty_rest_of_line here.
159 PR gas/827
160 * as.h (rs_dummy): Define.
161 * symbols.c (symbol_X_add_number): New function.
162 * symbols.h (symbol_X_add_number): Declare.
163 * stabs.c (aout_process_stab): Tidy symbol frag setting.
164 * read.c (assign_symbol): New function, split out from s_set.
165 Use symbol_find_or_make. Leave fr_type of dummy frag as rs_dummy.
166 Fix COFF hacks for multi-emulation gas.
167 (s_set): Call assign_symbol. Remove "register" keyword.
168 (set_zero_frag): New function.
169 (pseudo_set): Always check for assignment to section syms.
170 Always set segment and frag of symbol, and likewise extern for
171 aout/bout. Handle assignment of sym=sym+/-const specially. Don't
172 special case exp.X_add_number non-zero for O_symbol expressions.
173 (equals): Use assign_symbol.
175 2005-04-08 Bob Wilson <bob.wilson@acm.org>
177 * config/tc-xtensa.c (xtensa_create_xproperty_segments): Skip
178 SEC_MERGE sections.
180 2005-04-06 H.J. Lu <hongjiu.lu@intel.com>
182 * config/tc-i386.c (tc_gen_reloc): Don't turn
183 BFD_RELOC_X86_64_32S into BFD_RELOC_32.
185 2005-04-06 Nick Clifton <nickc@redhat.com>
187 * po/rw.po: New translation: Kinyarwanda
188 * configure.in (ALL_LINGUAS): Add rw
189 * configure: Regenerate.
191 2005-04-05 Sterling Augustine <sterling@tensilica.com>
192 Bob Wilson <bob.wilson@acm.org>
194 * config/tc-xtensa.c (branch_align_power): New.
195 (xtensa_find_unaligned_branch_targets, get_aligned_diff,
196 future_alignment_required): Use branch_align_power to check section
197 alignment as well as xtensa_fetch_width when aligning branch targets.
199 2005-04-05 Bob Wilson <bob.wilson@acm.org>
201 * config/tc-xtensa.c: Warning fixes throughout.
202 (xtensa_fetch_width): Change to unsigned.
203 (assemble_nop, xtensa_find_unaligned_branch_targets,
204 xtensa_find_unaligned_loops, xg_assemble_vliw_tokens,
205 is_narrow_branch_guaranteed_in_range, xtensa_fix_close_loop_end_frags,
206 min_bytes_to_other_loop_end, unrelaxed_frag_min_size,
207 unrelaxed_frag_max_size, xtensa_fix_short_loop_frags,
208 count_insns_to_loop_end, unrelaxed_frag_min_insn_count,
209 get_text_align_max_fill_size, get_text_align_nop_count,
210 get_text_align_nth_nop_size, get_noop_aligned_address,
211 get_aligned_diff, convert_frag_align_next_opcode,
212 convert_frag_immed_finish_loop, xtensa_create_property_segments,
213 xtensa_create_xproperty_segments, xt_block_aligned_size): Clean up
214 types, avoiding size_t and using offsetT and addressT appropriately.
215 (get_text_align_power): Clean up types. Avoid incorrect bound.
216 (get_text_align_fill_size): Clean up types. Restructure for clarity.
218 2005-04-04 H.J. Lu <hongjiu.lu@intel.com>
220 * config/tc-ia64.c (start_unwind_section): Undo the change
221 of 2004-08-18.
222 (generate_unwind_image, dot_endp): Likewise.
224 2005-04-01 David Mosberger <davidm@hpl.hp.com>
226 * config/tc-ia64.c (ia64_handle_align): Move le_nop and
227 le_nop_stop arrays and initializers to file scope.
228 (md_begin): When generating code for anything other than
229 Itanium 1, use MMI instead of MFI NOP bundles as a filler.
231 2005-04-01 Jan Beulich <jbeulich@novell.com>
233 * config/tc-i386.c (output_imm): Also set sign flag for 64-bit push
234 immediates.
236 2005-04-01 Jan-Benedict Glaw <jbglaw@lug-owl.de>
238 * NEWS: Mention [fdgh]_floating.
239 * config/atof-vax.c: Fix some whitespace.
240 * config/tc-vax.c (md_pseudo_table): Add "[fdgh]_floating".
242 2005-04-01 Nick Clifton <nickc@redhat.com>
244 * configure.in: Add a check for <unistd.h> providing a prototype
245 for getopt() which is compatible with the one in
246 include/getopt.h. If so then define HAVE_DECL_GETOPT.
247 * configure: Regenerate.
248 * config.in (HAVE_DECL_GETOPT): Add.
250 2005-04-01 Jan Beulich <jbeulich@novell.com>
252 * config/tc-i386.c (s_bss): Call obj_elf_section_change_hook.
254 2005-04-01 Jan Beulich <jbeulich@novell.com>
256 * config/tc-i386.c (md_apply_fix3): Also handle BFD_RELOC_X86_64_32S.
257 (tc_gen_reloc): Handle BFD_RELOC_X86_64_32S in the default case.
259 2005-03-30 Julian Brown <julian@codesourcery.com>
261 * config/tc-arm.c (arm_adjust_symtab): Rename
262 bfd_elf32_is_arm_mapping_symbol_name to bfd_is_arm_mapping_symbol_name.
264 2005-03-30 Julian Brown <julian@codesourcery.com>
266 * config/tc-arm.c (mapping_state): Change documentation in function
267 comment to cross-reference spec instead. Change type of mapping symbols
268 to BSF_NO_TYPE.
269 (arm_adjust_symtab): Don't change type of mapping symbols here.
271 2005-03-30 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
273 * as.h [NEED_DECLARATION_FFS] (ffs): Prototype and alphabetize.
274 * config.in: Regenerate.
275 * configure: Regenerate.
276 * configure.in: Check for ffs decl and alphabetize.
278 2005-03-29 Daniel Jacobowitz <dan@codesourcery.com>
279 Phil Blundell <philb@gnu.org>
281 * config/tc-arm.c (arm_parse_reloc): Add TLS relocations.
282 (md_apply_fix3): Mark TLS symbols.
283 (tc_gen_reloc): Handle TLS relocations.
284 (arm_fix_adjustable): Ignore TLS relocations.
285 (s_arm_elf_cons): Support expressions after decorated symbols.
287 2005-03-29 Julian Brown <julian@codesourcery.com>
289 * config/tc-arm.c (marked_pr_dependency): New bitmap, bit N indicates
290 whether personality routine index N has been output for this section.
291 (mapping_state): tc_segment_info_data now struct not enum.
292 (arm_elf_change_section): Likewise, and marked_pr_dependency is now
293 handled on section change.
294 (create_unwind_entry): Previous code to output dependency removed.
295 (s_arm_unwind_fnend): Output dependency if it hasn't been done already
296 for this section.
297 * config/tc-arm.h (TC_SEGMENT_INFO_TYPE): Redefined as struct
298 arm_segment_info_type.
299 (arm_segment_info_type): New struct.
300 * testsuite/gas/arm/unwind.d: Update expected output.
302 2005-03-28 Sterling Augustine <sterling@tensilica.com>
303 Bob Wilson <bob.wilson@acm.org>
305 * config/tc-xtensa.c (do_align_targets): Update comment.
306 (xtensa_frob_label): Compute "freq" before possibly switching frags.
307 Insert a LOOP_END frag before every loop target, and do not overload
308 DESIRE_ALIGN_IF_TARGET frags with loop end information.
309 (xg_assemble_vliw_tokens): Use do_align_targets.
310 (xtensa_fix_target_frags): Remove code to convert a
311 DESIRE_ALIGN_IF_TARGET frag to a LOOP_END frag when there is a
312 negatable branch at the end of a loop.
313 (frag_can_negate_branch): Delete.
315 2005-03-28 David Mosberger <davidm@hpl.hp.com>
316 H.J. Lu <hongjiu.lu@intel.com>
318 PR 803
319 NEWS: Mention "-mtune=[itanium1|itanium2]".
321 * config/tc-ia64.c (md): Add tune.
322 (md_parse_option): Accepted "-mtune=[itanium1|itanium2]".
323 (md_show_usage): Add "-mtune=[itanium1|itanium2]".
324 (extra_goodness): Prefer M- and I-unit NOPs for itanium2. F and
325 B unit NOPs are discouraged for McKinley-derived cores.
326 (md_begin): Don't hardcode the "extra_goodness()" function in
327 the comment...
328 (ia64_init): Set md.tune to itanium2.
330 * doc/as.texinfo: Add -mtune=[itanium1|itanium2]".
331 * doc/c-ia64.texi: Likewise.
333 2005-03-27 Ian Lance Taylor <ian@airs.com>
335 * config/obj-coff.c (coff_frob_symbol): When crashing because of a
336 bad C_EFCN symbol, print its name.
338 2005-03-25 Bob Wilson <bob.wilson@acm.org>
340 * config/tc-xtensa.c (use_longcalls): Delete.
341 (xg_symbolic_immeds_fit): Check for direct calls and return TRUE if
342 the use_longcalls flag is set. Do this before checking the segment.
343 (xg_expand_assembly_insn): Rearrange to use new do_expand flag. Never
344 expand direct calls at this point.
345 (xtensa_set_frag_assembly_state): Set use_longcalls flag.
346 (xtensa_find_unmarked_state_frags): Likewise.
347 (md_assemble): Do not disable longcalls by setting is_specific_opcode.
348 (xg_assemble_vliw_tokens): Switch frags when use_longcalls changes.
349 (convert_frag_immed): Remove unnecessary check of is_specific_opcode.
350 * config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag.
352 2005-03-25 Hans-Peter Nilsson <hp@bitrange.com>
354 * config/tc-mmix.c, config/tc-mmix.h: Convert to ISO C90.
356 2005-03-25 Hans-Peter Nilsson <hp@axis.com>
358 * config/tc-cris.h: Convert to ISO C90.
359 * config/tc-cris.c: Ditto.
360 (md_estimate_size_before_relax): Remove obsolete comment for
361 parameter "segment_type".
362 (md_begin): Document reason for cast of hash_insert argument.
363 (md_atof): Correct type of parameter "type".
365 2005-03-24 Nick Clifton <nickc@redhat.com>
367 * write.h (bit_fix_new): Remove redundant prototype.
368 * config/atof-ieee.c: Convert to ISO-C90 and fix formatting.
369 * config/obj-aout.c: Convert to ISO-C90 and fix formatting.
370 * config/obj-aout.h: Convert to ISO-C90 and fix formatting.
371 * config/obj-bout.c: Convert to ISO-C90 and fix formatting.
372 * config/obj-bout.h: Convert to ISO-C90 and fix formatting.
373 * config/obj-ecoff.c: Convert to ISO-C90 and fix formatting.
374 * config/obj-ecoff.h: Convert to ISO-C90 and fix formatting.
375 * config/obj-som.c: Convert to ISO-C90 and fix formatting.
376 * config/obj-som.h: Convert to ISO-C90 and fix formatting.
377 * config/tc-a29k.c: Convert to ISO-C90 and fix formatting.
378 * config/tc-a29k.h: Convert to ISO-C90 and fix formatting.
379 * config/tc-alpha.c: Convert to ISO-C90 and fix formatting.
380 * config/tc-alpha.h: Convert to ISO-C90 and fix formatting.
381 * config/tc-arc.c: Convert to ISO-C90 and fix formatting.
382 * config/tc-arc.h: Convert to ISO-C90 and fix formatting.
383 * config/tc-d10v.c: Convert to ISO-C90 and fix formatting.
384 * config/tc-d10v.h: Convert to ISO-C90 and fix formatting.
385 * config/tc-d30v.c: Convert to ISO-C90 and fix formatting.
386 * config/tc-d30v.h: Convert to ISO-C90 and fix formatting.
387 * config/tc-dlx.c: Convert to ISO-C90 and fix formatting.
388 * config/tc-dlx.h: Convert to ISO-C90 and fix formatting.
389 * config/tc-fr30.c: Convert to ISO-C90 and fix formatting.
390 * config/tc-fr30.h: Convert to ISO-C90 and fix formatting.
391 * config/tc-h8500.c: Convert to ISO-C90 and fix formatting.
392 * config/tc-h8500.h: Convert to ISO-C90 and fix formatting.
393 * config/tc-i370.c: Convert to ISO-C90 and fix formatting.
394 * config/tc-i370.h: Convert to ISO-C90 and fix formatting.
395 * config/tc-i960.c: Convert to ISO-C90 and fix formatting.
396 * config/tc-ip2k.c: Convert to ISO-C90 and fix formatting.
397 * config/tc-ip2k.h: Convert to ISO-C90 and fix formatting.
398 * config/tc-m32r.c: Convert to ISO-C90 and fix formatting.
399 * config/tc-m32r.h: Convert to ISO-C90 and fix formatting.
400 * config/tc-m88k.c: Convert to ISO-C90 and fix formatting.
401 * config/tc-m88k.h: Convert to ISO-C90 and fix formatting.
402 * config/tc-mcore.c: Convert to ISO-C90 and fix formatting.
403 * config/tc-mcore.h: Convert to ISO-C90 and fix formatting.
404 * config/tc-mn10200.c: Convert to ISO-C90 and fix formatting.
405 * config/tc-ns32k.c: Convert to ISO-C90 and fix formatting.
406 * config/tc-ns32k.h: Convert to ISO-C90 and fix formatting.
407 * config/tc-openrisc.c: Convert to ISO-C90 and fix formatting.
408 * config/tc-openrisc.h: Convert to ISO-C90 and fix formatting.
409 * config/tc-or32.c: Convert to ISO-C90 and fix formatting.
410 * config/tc-or32.h: Convert to ISO-C90 and fix formatting.
411 * config/tc-pdp11.h: Convert to ISO-C90 and fix formatting.
412 * config/tc-pj.c: Convert to ISO-C90 and fix formatting.
413 * config/tc-pj.h: Convert to ISO-C90 and fix formatting.
414 * config/tc-tahoe.c: Convert to ISO-C90 and fix formatting.
415 * config/tc-tic80.c: Convert to ISO-C90 and fix formatting.
416 * config/tc-tic80.h: Convert to ISO-C90 and fix formatting.
417 * config/tc-v850.c: Convert to ISO-C90 and fix formatting.
418 * config/tc-v850.h: Convert to ISO-C90 and fix formatting.
419 * config/tc-w65.c: Convert to ISO-C90 and fix formatting.
420 * config/tc-w65.h: Convert to ISO-C90 and fix formatting.
421 * config/tc-xstormy16.c: Convert to ISO-C90 and fix formatting.
422 * config/tc-xstormy16.h: Convert to ISO-C90 and fix formatting.
424 2005-03-23 Jim Blandy <jimb@redhat.com>
426 * config/tc-arm.c (arm_adjust_symtab): Fetch elf_sym's binding
427 attributes properly.
429 2005-03-23 Mike Frysinger <vapier@gentoo.org>
430 Nick Clifton <nickc@redhat.com>
432 * configure.tgt: Accept any C library to accompany a GNU Linux
433 implementation, not just the GNU C library.
434 * configure.in: Likewise.
435 * configure: Regenerate.
437 2005-03-23 Nick Clifton <nickc@redhat.com>
439 * config/tc-tic30.c: Convert to ISO C90 formatting.
440 * config/tc-tic30.h: Convert to ISO C90 formatting.
441 * config/tc-pdp11.c: Convert to ISO C90 formatting.
442 * config/atof-vax.c: Convert to ISO C90 formatting.
444 2005-03-21 Maciej W. Rozycki <macro@mips.com>
446 * config/tc-mips.c (mips_frob_file): Sort BFD_RELOC_MIPS16_LO16
447 relocations correctly as well.
448 (mips_fix_adjustable): Don't make BFD_RELOC_MIPS16_LO16
449 relocations in mergeable sections section-relative either.
451 2005-03-21 Bob Wilson <bob.wilson@acm.org>
453 * config/tc-xtensa.c (md_apply_fix3): Recognize XTENSA_PLT relocations.
455 2005-03-21 Nick Clifton <nickc@redhat.com>
457 * config/tc-sh.c (sh_elf_final_processing): Fix compile time
458 warning by providing a prototype for sh_symbian_find_elf_flags.
460 * cgen.c (gas_cgen_parse_operand): Fix typo introduced by
461 previous delta.
463 2005-03-21 Alan Modra <amodra@bigpond.net.au>
465 * configure.tgt: Handle setting of bfd_gas for fmt=multi targets
466 along with other formats that set bfd_gas. Remove unnecessary
467 setting of bfd_gas. Delete strongarm cases in generic_target
468 switch.
470 2005-03-21 Alan Modra <amodra@bigpond.net.au>
472 PR gas/780
473 * config/tc-m68k.c (TRUNC, SEXT): Define.
474 (issbyte, isubyte, issword, isuword, isbyte, isword): Use the above.
475 (m68k_ip): Truncate or sign extend expressions as appropriate.
476 (get_num): Likewise.
477 (md_apply_fix3): Use SEXT.
479 2005-03-21 Alan Modra <amodra@bigpond.net.au>
481 * Makefile.am (OBJ_FORMAT_CFILES): Prune config/obj-vms.c.
482 (OBJ_FORMAT_HFILES): Prune config/obj-vms.h.
483 (obj-vms.o): Delete rule.
484 Run "make dep-am".
485 * Makefile.in: Regenerate.
486 * aclocal.m4: Regenerate.
487 * doc/Makefile.in: Regenerate.
488 * po/POTFILES.in: Regenerate.
490 2005-03-18 C Jaiprakash <cjaiprakash@noida.hcltech.com>
492 * config/tc-m68k.c (m68k_elf_final_processing): Set file specific
493 flag for coldfire v4e.
495 2005-03-17 Bob Wilson <bob.wilson@acm.org>
497 * config/tc-xtensa.c (xg_apply_tentative_value): Rename to
498 xg_apply_fix_value and return a value to indicate success.
499 (md_pcrel_from): Skip check of fx_done. Return 0 if not PC-relative.
500 (xtensa_force_relocation): Remove checks for VTABLE relocs.
501 (xtensa_validate_fix_sub): New.
502 (xtensa_fix_adjustable): Remove check for external or weak symbols.
503 (tc_gen_reloc): Move code to handle difference of symbols and code to
504 apply tentative fix values to ...
505 (md_apply_fix3): ...here. Enable standard overflow checks for simple
506 8, 16, and 32 bit relocations. Apply fixes for slot-specific
507 relocations when linkrelax flag is not set.
508 * config/tc-xtensa.h (xtensa_validate_fix_sub): Add prototype.
509 (TC_FORCE_RELOCATION_SUB_SAME, TC_VALIDATE_FIX_SUB): Define.
511 2005-03-17 Jan Beulich <jbeulich@novell.com>
513 * config/tc-i386.c (i386_scale): Beautify error message.
514 (Intel syntax comments): Update.
515 (struct intel_parser_s): Add fields in_offset, in_bracket, and
516 next_operand.
517 (intel_e04_1, intel_e05_1, intel_e05_1, intel_e09_1, intel_e10_1):
518 Remove declarations.
519 (intel_bracket_expr): Declare.
520 (i386_intel_operand): Initialize new intel_parser fields. Wrap most
521 of the function body in a loop allowing to split an operand into two.
522 Replace calls to malloc and checks of it returning non-NULL with
523 calls to xmalloc/xstrdup.
524 (intel_expr): SHORT no longer handled here. Add comment indicating
525 comparison ops need implementation.
526 (intel_e04, intel_e04_1): Combine, replace recursion with loop.
527 Check right operand of - does not specify a register when parsing
528 the address of a memory reference.
529 (intel_e05, intel_e05_1): Combine, replace recursion with loop.
530 Check operands do not specify a register when parsing the address of
531 a memory reference.
532 (intel_e06, intel_e06_1): Likewise.
533 (intel_e09, intel_e09_1): Combine, replace recursion with loop. Also
534 handle SHORT as well as unary + and -. Don't accept : except for
535 segment overrides or in direct far jump/call insns.
536 (intel_brack_expr): New.
537 (intel_e10, intel_e10_1): Combine, replace recursion with loop. Use
538 intel_brack_expr.
539 (intel_e11): Replace chain of if/else-if by switch, alloing fall-
540 through in certain cases. Use intel_brack_expr. Add new diagnostics.
541 Allow symbolic constants as register scale value.
542 (intel_get_token): Replace call to malloc and check of return value
543 with call to xmalloc. Change handling for FLAT to match MASM's.
544 (intel_putback_token): Don't try to back up/free current token if
545 that is T_NIL.
547 2005-03-16 Daniel Jacobowitz <dan@codesourcery.com>
549 * configure.tgt: Set emulation for arm-*-eabi*.
550 * config/tc-arm.c (meabi_flags): Check EABI_DEFAULT.
551 * config/te-armeabi.h: New file.
552 * config/te-armlinuxeabi.h (EABI_DEFAULT): Define.
553 * config/te-symbian.h: Include "te-armeabi.h".
555 2005-03-16 Nick Clifton <nickc@redhat.com>
557 * cgen.c (gas_cgen_parse_operand): Copy opinfo parameter into a
558 local variable in case it is clobbered by the setjmp.
560 2005-03-16 Nick Clifton <nickc@redhat.com>
561 Ben Elliston <bje@au.ibm.com>
563 * configure.in (werror): New switch: Add -Werror to the
564 compiler command line. Enabled by default. Disable via
565 --disable-werror.
566 * configure: Regenerate.
568 2005-03-16 Nick Clifton <nickc@redhat.com>
570 * config/obj-coff.h: Convert to ISO C90 formatting.
571 * config/obj-coff.c: Convert to ISO C90 formatting.
573 2005-03-15 Zack Weinberg <zack@codesourcery.com>
575 * config/tc-arm.c (do_mla): Rename to do_mlas, take second
576 is_mls parameter; do not diagnose Rm==Rd when is_mls.
577 (do_mla, do_mls, five_bit_unsigned_immediate, bfci_lsb_and_width)
578 (do_bfc, do_bfi, do_bfx, do_rbit, do_mov16, do_ldsttv4): New functions.
579 (insns): Add ARMv6T2 instructions:
580 bfc bfi mls movw movt rbit sbfx ubfx ldrht ldrsht ldrsbt strht.
581 (arm_archs): Add V6T2 variants.
583 2005-03-15 Nick Clifton <nickc@redhat.com>
585 * NEWS: Add cutoff for changes in 2.16 release.
587 2005-03-15 Jan Beulich <jbeulich@novell.com>
589 * expr.c (operand): Merge handling of unary + into that for unary
590 -, !, and ~.
592 2005-03-14 Eric Christopher <echristo@redhat.com>
594 * config/tc-mips.c: Include dw2gencfi.h.
595 (mips_cfi_frame_initial_instructions): New.
596 * config/tc-mips.h (TARGET_USE_CFIPOP): Define.
597 (tc_cfi_frame_initial_instructions): Ditto.
598 (DWARF2_DEFAULT_RETURN_COLUMN): Ditto.
599 (DWARF2_CIE_DATA_ALIGNMENT): Ditto.
600 * Makefile.am: Update dependencies.
601 * Makefile.in: Regenerate.
603 2005-03-15 Alan Modra <amodra@bigpond.net.au>
605 * po/es.po: Commit new Spanish translation.
607 2005-03-14 Alan Modra <amodra@bigpond.net.au>
609 * po/tr.po: Commit new Turkish translation.
611 2005-03-12 Zack Weinberg <zack@codesourcery.com>
613 * config/tc-arm.c (tinsns): Add ARMv6K instructions sev, wfe,
614 wfi, yield.
616 2005-03-11 Daniel Jacobowitz <dan@codesourcery.com>
618 * config-gas.com: Mark vax-vms as obsolete.
619 * configure.in: Remove fmt=vms support.
620 * config.in: Regenerate.
621 * configure: Regenerate.
622 * config/obj-vms.h, config/obj-vms.c, config/vms-conf.h: Remove.
624 2005-03-10 Sterling Augustine <sterling@tensilica.com>
625 Bob Wilson <bob.wilson@acm.org>
627 * config/tc-xtensa.c (finish_vinsn): Include the last instruction slot
628 when checking if xg_resolve_literals needs to be called.
629 * config/tc-xtensa.h: Fix spelling typo in a comment.
631 2005-03-10 Jan Beulich <jbeulich@novell.com>
633 * config/tc-tic54x.h (tic54x_macro_info): Change parameter type.
634 * config/tc-tic54x.c (tic54x_macro_info): Likewise. Replace hand-
635 crafted structure declarations with the types from macro.h.
637 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
639 * config/tc-mips.c (s_cpsetup): Use '__gnu_local_gp' instead of '_gp'
640 for -mno-shared optimization.
642 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
644 * config/tc-mips.c (MAX_VR4130_NOPS, MAX_DELAY_NOPS): New macros.
645 (MAX_NOPS): Bump to 4.
646 (mips_fix_vr4130): New variable.
647 (nops_for_vr4130): New function.
648 (nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS. Use
649 nops_for_vr4130 if working around VR4130 errata.
650 (OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
651 (md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
652 (md_parse_option): Handle them.
653 (md_show_usage): Print them.
654 * doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.
656 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
658 * config/tc-mips.c (append_insn): Remove cop_interlocks test from
659 branch delay code.
661 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
663 * config/tc-mips.h (mips_flush_pending_output): Delete.
664 (mips_emit_delays): Declare.
665 (md_flush_pending_output): Use mips_emit_delays.
666 * config/tc-mips.c (mips_no_prev_insn): Remove parameter; always forget
667 the previous instructions.
668 (md_begin, append_insn, md_parse_option): Update callers.
669 (mips_emit_delay): Remove parameter. Move INSNS != 0 code to
670 start_noreorder.
671 (mips_align, s_change_sec, s_cons, s_float_cons, s_gpword)
672 (s_gpdword): Update callers.
673 (start_noreorder, end_noreorder): New functions.
674 (macro, macro2, mips16_macro, s_mipsset): Use them instead of
675 manipulating mips_opts or prev_nop_frag directly.
676 (mips_flush_pending_output): Delete.
678 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
680 * config/tc-mips.c (mips_move_labels): New function, taken from...
681 (append_insn, mips_emit_delays): ...here.
683 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
685 * config/tc-mips.c (MAX_NOPS): New macro.
686 (history): Resize to 1 + MAX_NOPS.
687 (fix_vr4120_class): New enumeration.
688 (vr4120_conflicts): New variable.
689 (init_vr4120_conflicts): New function.
690 (md_begin): Call it.
691 (insn_uses_reg): Constify first argument.
692 (classify_vr4120_insn, insns_between, nops_for_insn, nops_for_sequence)
693 (nops_for_insn_or_target): New functions.
694 (append_insn): Use the new nops_for_* functions instead of inline
695 delay checks. Generalize prev_nop_frag handling to handle an
696 arbitrary history length. Insert nops into the history buffer
697 once the number of nops in prev_nop_frag is fixed.
698 (emit_delays): Use nops_for_insn instead of inline delay checks.
700 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
702 * config/tc-mips.c (append_insn): Remove now-redundant nops != 0
703 check from branch delay code. Remove unnecessary check for branches.
705 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
707 * config/tc-mips.c (dummy_opcode): Delete.
708 (nop_insn, mips16_nop_insn): New variables.
709 (NOP_INSN): New macro.
710 (insn_length, create_insn, install_insn, move_insn, add_fixed_insn)
711 (add_relaxed_insn, insert_into_history, emit_nop): New functions.
712 (md_begin): Initialize nop_insn and mips16_nop_insn.
713 (append_insn): Use the new emit_nop function to add nops, recording
714 them in the history buffer. Use add_fixed_insn or add_relaxed_insn
715 to reserve room for the instruction and install_insn to install the
716 final form. Use insert_into_history to record the instruction in
717 the history buffer. Use move_insn to do delay slot filling.
718 (mips_emit_delays): Use add_fixed_insn instead of the emit_nop macro.
719 (macro_build, mips16_macro_build, macro_build_lui, mips_ip)
720 (mips16_ip): Use create_insn to initialize mips_cl_insns.
722 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
724 * config/tc-mips.c (INSERT_BITS, EXTRACT_BITS, INSERT_OPERAND)
725 (EXTRACT_OPERAND, MIPS16_INSERT_OPERAND, MIPS16_EXTRACT_OPERAND): New.
726 (insn_uses_reg, reg_needs_delay, append_insn, macro_build)
727 (mips16_macro_build, macro_build_lui, mips16_macro, mips_ip)
728 (mips16_ip): Use the new macros instead of explicit masks and shifts.
730 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
732 * config/tc-mips.c (mips_cl_insn): Replace the valid_p, delay_slot_p
733 and extended_p fields with a single fixed_p field.
734 (append_insn, mips_no_prev_insn): Adjust accordingly.
736 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
738 * config/tc-mips.c (mips_cl_insn): Replace reloc_type array with
739 a single mips16_absolute_jump_p bit.
740 (append_insn): Adjust accordingly.
742 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
744 * config/tc-mips.h (mips_cl_insn): Move definition to...
745 * config/tc-mips.c (mips_cl_insn): ...here. Add new fields:
746 frag, where, fixp, reloc_type, valid_p, noreorder_p, delay_slot_p
747 and extended_p.
748 (history): New variable.
749 (prev_insn, prev_prev_insn, prev_insn_valid, prev_insn_frag)
750 (prev_insn_where, prev_insn_reloc_type, prev_insn_fixp)
751 (prev_insn_is_delay_slot, prev_insn_unreordered, prev_insn_extended)
752 (prev_prev_insn_unreordered): Delete.
753 (reg_needs_delay, append_insn, mips_no_prev_insn, mips_emit_delays)
754 (macro_start): Replace uses of prev_insn* with the equivalent history[]
755 field.
757 2005-03-08 Daniel Jacobowitz <dan@codesourcery.com>
759 * doc/Makefile.am: Update as.info dependencies.
760 * aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.
762 2005-03-08 Jan Beulich <jbeulich@novell.com>
764 * doc/as.texinfo: Add sentence to indicate redefining a macro is an
765 error, and point to .purgem documentation if someone really needs
766 re-definitions.
767 * NEWS: Mention macro redefinition is now an error.
769 2005-03-08 Jan Beulich <jbeulich@novell.com>
771 * config/tc-ia64.c (emit_one_bundle): Track last slot user insn was
772 emitted to. Add more precise diagnostics for non-fitting insns based
773 on that. Eliminate now superfluous special casing of MLX. Clear out
774 slot information when dropping an insn.
776 2005-03-08 Jan Beulich <jbeulich@novell.com>
778 * config/tc-ia64.c (parse_section_name): Rename to...
779 (cross_section): In addition to separating the name from the rest of
780 the arguments, also carry out the operation.
781 (dot_xdata): Use cross_section.
782 (dot_float_cons): Likewise.
783 (dot_xstringer): Likewise.
784 (dot_xdata_ua): Likewise.
785 (dot_float_cons_ua): Likewise. Pass float_cons, not stmt_float_cons.
787 2005-03-05 Alan Modra <amodra@bigpond.net.au>
789 * po/gas.pot: Regenerate.
791 2005-03-04 David Daney <ddaney@avtrex.com>
793 * config/tc-mips.c (macro_build_lui): Use '__gnu_local_gp'
794 instead of '_gp' for -mno-shared optimization.
795 (s_cpload): Ditto.
796 (s_abicalls): Document it in the comment.
797 (md_show_usage): Document the -mno-shared option.
799 2005-03-04 Richard Sandiford <rsandifo@redhat.com>
801 * config/tc-mips.c (mips_set_options): Add sym32 field.
802 (mips_opts): Initialize it.
803 (HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
804 (HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
805 (HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
806 (load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
807 when deciding whether to use a symbolic %highest/%higher expansion.
808 (macro): Likewise. Remove o64/n32 linux hack. Always use
809 ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
810 and "la". Handle constants separately from symbolic expressions in
811 the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
812 and using load_register to load the high part of the address.
813 (OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
814 (OPTION_ELF_BASE): Bump by 2.
815 (md_longopts): Add entries for -msym32 and -mno-sym32.
816 (md_parse_option): Handle them.
817 (usage): Document them.
818 (s_mipsset): Handle ".set sym32" and ".set nosym32".
819 (s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
820 HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
821 * doc/c-mips.texi: Document ".set sym32", ".set nosym32",
822 -msym32 and -mno-sym32.
824 2005-03-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
826 * config/tc-mips.c (load_address): Implement GP optimization
827 for 64bit address space non-PIC. Fix formatting.
828 (macro): Likewise. Simplify code.
829 (md_parse_option): Don't bail out if -G 0 is set for PIC code.
830 (mips_after_parse_args): Simplify code.
832 2005-03-03 Nick Clifton <nickc@redhat.com>
834 * expr.c (operand): Remove redundant code enclosed by #ifdef
835 RELAX_PAREN_GROUPING....#endif.
837 * config/tc-mn10200.c (tc_gen_reloc): Handle the case where the
838 reloc is the difference of two symbols defined in the same
839 section.
841 * config/tc-iq2000.c (line_comment_chars): Include the # character
842 as otherwise this breaks #APP/#NO_APP processing.
844 2005-03-03 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
846 * config/tc-arc.c(md_assemble): Remove dead code for handling
847 immediate indexing of ld and st .
849 2005-03-02 Daniel Jacobowitz <dan@codesourcery.com>
850 Joseph Myers <joseph@codesourcery.com>
852 * config/tc-mips.c (percent_op): Add %tlsgd, %tlsldm, %dtprel_hi,
853 %dtprel_lo, %tprel_hi, %tprel_lo, and %gottprel.
854 (parse_relocation): Check for a word break after a relocation
855 operator.
856 (md_apply_fix3): Handle TLS relocations, and mark thread-local
857 symbols.
859 2005-03-02 Alan Modra <amodra@bigpond.net.au>
861 * config/tc-ppc.c (ppc_fix_adjustable <ELF>): Remove bogus checks.
863 2005-03-02 Jan Beulich <jbeulich@novell.com>
865 * as.c (main): Use unlink_if_ordinary instead of unlink.
866 * messages.c (as_fatal): Likewise.
868 2005-03-02 Jan Beulich <jbeulich@novell.com>
870 * config/tc-i386.c (build_modrm_byte): Add lock prefix for cr8...15
871 accesses.
872 (parse_register): Allow cr8...15 in all modes.
874 2005-03-02 Jan Beulich <jbeulich@novell.com>
876 * config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
877 etc. like normal symbol references (T_ID).
879 2005-03-02 Alan Modra <amodra@bigpond.net.au>
881 * symbols.c (fb_label_name): Fix silly thinko in last change.
883 2005-03-02 Alan Modra <amodra@bigpond.net.au>
885 * expr.c (integer_constant): Remove TARGET_WORD_SIZE hack.
886 * config/tc-m68k.h (TARGET_WORD_SIZE): Delete.
888 * symbols.c (fb_label_name): Allow an augend of 2 for mmix.
890 2005-03-01 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
892 PR gas/708
893 * config/tc-arc.c (md_assemble): Initialize suffix for extension
894 suffixes also.
896 2005-03-01 Alan Modra <amodra@bigpond.net.au>
898 * config/obj-coff.c (fixup_segment): Delete sy_mri_common assertion.
900 * as.h (assert): Warning fix.
901 * expr.c (expr): Correct assertion.
902 * read.c (s_comm_internal): Remove assertion.
903 * write.c (relax_segment): Enable vma assertion only for BFD_ASSEMBLER.
904 (fixup_segment): Remove assertion.
905 * config/tc-dlx.c (machine_ip): Remove untrue assertions.
906 (md_apply_fix3): Likewise.
907 * config/tc-i370.c (md_begin): Correct assertion.
908 (i370_macro): Warning fix for assertion.
910 2005-03-01 Alan Modra <amodra@bigpond.net.au>
912 * configure.in (AC_C_BIGENDIAN): Invoke.
913 * configure: Regenerate.
914 * write.c (write_object_file <!BFD_ASSEMBLER>): Don't use sizeof
915 host variable to set string header size.
916 * config/obj-aout.c (obj_header_append): Don't use host structs.
917 (obj_symbol_to_chars): Likewise.
918 (obj_emit_strings): Likewise. Use the passed in output pointer.
919 * config/obj-aout.h (H_GET_FILE_SIZE): Include H_GET_LINENO_SIZE.
920 * config/obj-bout.c (obj_emit_relocations): Use md_reloc_size,
921 not sizeof host struct.
922 (obj_header_append, obj_symbol_to_chars): Don't use host structs.
923 (obj_emit_strings): Likewise.
924 * config/obj-bout.h (EXEC_BYTES_SIZE): Define.
925 (N_TXTOFF, H_GET_FILE_SIZE, H_GET_HEADER_SIZE): Use instead of
926 sizeof host struct.
927 (H_SET_SYMBOL_TABLE_SIZE): Hard code sym size rather than using
928 sizeof host struct.
929 (host_number_to_chars): Define.
930 * config/obj-hp300.c (hp300_header_append): Don't use sizeof
931 host internal struct to set header sizes.
932 * config/tc-i960.c (md_number_to_field): Warning fix.
933 (md_ri_to_chars): Use host byte order.
934 (get_cdisp, md_apply_fix3): Warning fix.
935 * config/tc-m68k.c (md_assemble): Don't use sizeof host short.
937 2005-02-28 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
939 * doc/c-arc.texi: Update documentation about ARC's extension
940 instructions.
942 2005-02-27 Svein E. Seldal <svein@dev.seldal.com>
944 * config/tc-tic4x.c (tic4x_gen_to_words): Changed mail
945 address for myself.
947 2005-02-23 Alan Modra <amodra@bigpond.net.au>
949 * cgen.c: Warning fixes.
950 * config/tc-arc.c: Likewise.
951 * config/tc-arm.c: Likewise.
952 * config/tc-avr.c: Likewise.
953 * config/tc-d10v.c: Likewise.
954 * config/tc-d30v.c: Likewise.
955 * config/tc-frv.c: Likewise.
956 * config/tc-frv.h: Likewise.
957 * config/tc-h8300.c: Likewise.
958 * config/tc-h8500.c: Likewise.
959 * config/tc-i370.c: Likewise.
960 * config/tc-i960.c: Likewise.
961 * config/tc-ia64.c: Likewise.
962 * config/tc-ip2k.c: Likewise.
963 * config/tc-m68hc11.c: Likewise.
964 * config/tc-maxq.c: Likewise.
965 * config/tc-mcore.c: Likewise.
966 * config/tc-mips.c: Likewise.
967 * config/tc-msp430.c: Likewise.
968 * config/tc-pj.c: Likewise.
969 * config/tc-ppc.c: Likewise.
970 * config/tc-ppc.h: Likewise.
971 * config/tc-s390.c: Likewise.
972 * config/tc-sh.c: Likewise.
973 * config/tc-sh64.c: Likewise.
974 * config/tc-tic4x.c: Likewise.
975 * config/tc-tic80.c: Likewise.
976 * config/tc-v850.c: Likewise.
977 * config/tc-vax.c: Likewise.
978 * config/tc-w65.c: Likewise.
979 * config/tc-xstormy16.c: Likewise.
980 * config/tc-z8k.c: Likewise.
982 2005-02-22 Catherine Moore <clm@cm00re.com>
984 * read.c (read_a_source_file): Reinstate TC_EQUAL_IN_INSN test.
985 * doc/internals.texi (TC_EQUAL_IN_INSN): Reinstate.
987 2005-02-22 Eric Christopher <echristo@redhat.com>
989 * config/tc-mips.c (struct proc): Change isym to
990 func_sym. New member func_end_sym.
991 (s_mips_ent): Update.
992 (s_mips_end): Ditto. Add code to compute function size.
994 2005-02-22 Alan Modra <amodra@bigpond.net.au>
996 * read.c: Warning fixes.
997 * config/obj-elf.c: Likewise.
999 2005-02-22 Maciej W. Rozycki <macro@mips.com>
1001 * config/tc-mips.c (append_insn): Call dwarf2_emit_insn() before
1002 emitting insn.
1004 2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
1006 * config/obj-coff.c (obj_coff_section): Replace SEC_SHARED with
1007 SEC_COFF_SHARED.
1009 * config/tc-tic54x.c (tic54x_bss): Replace SEC_BLOCK with
1010 SEC_TIC54X_BLOCK.
1011 (demand_empty_rest_of_line): Likewise.
1012 (tic54x_sblock): Likewise.
1013 (tic54x_clink): Replace with SEC_CLINK with SEC_TIC54X_CLINK.
1015 2005-02-21 Alan Modra <amodra@bigpond.net.au>
1017 * read.c (address_bytes): New function.
1018 (TC_ADDRESS_BYTES): Default for BSD_ASSEMBLER to address_bytes.
1019 (potable): Add "dc.a".
1020 (cons_worker): Handle "dc.a".
1021 * doc/internals.texi (TC_ADDRESS_BYTES): Document.
1023 2005-02-21 Alan Modra <amodra@bigpond.net.au>
1025 * input-file.c (input_file_open): Rearrange to avoid warning.
1027 2005-02-19 Alan Modra <amodra@bigpond.net.au>
1029 * config/tc-hppa.h (TC_EQUAL_IN_INSN): Delete.
1030 * read.c (read_a_source_file): Remove TC_EQUAL_IN_INSN test.
1031 * doc/internals.texi (TC_EQUAL_IN_INSN): Delete.
1033 2005-02-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1035 * config/tc-mips.c (macro_build_ldst_constoffset): Fail on $at
1036 uses after .set noat.
1037 (load_address): Likewise.
1038 (macro): Likewise. Don't try to avoid $at use by sacrificing
1039 the target register before it is stored, it won't work.
1041 2005-02-17 James E Wilson <wilson@specifixinc.com>
1043 * config/tc-ia64.c (emit_one_bundle): Stop filling a bundle if we
1044 see an instruction that specifies a template.
1046 2005-02-18 Alan Modra <amodra@bigpond.net.au>
1048 * config/tc-openrisc.c (openrisc_relax_frag): Delete unused function.
1049 * config/tc-sparc.c (sparc_ip): Make op_exp static to silence warnings.
1050 * config/tc-tic80.c (build_insn): Init insn[1] to silence warning.
1052 2005-02-17 H.J. Lu <hongjiu.lu@intel.com>
1054 * NEWS: Mention "-mhint.b=[ok|warning|error]".
1056 * config/tc-ia64.c (md): Add hint_b.
1057 (emit_one_bundle): Handle md.hint_b for "hint".
1058 (md_parse_option): Accepted "-mhint.b=[ok|warning|error]".
1059 (md_show_usage): Add "-mhint.b=[ok|warning|error]".
1060 (ia64_init): Set md.hint_b to error.
1061 (md_assemble): Handle md.hint_b for "hint.b".
1063 * doc/as.texinfo: Add "-mhint.b=[ok|warning|error]".
1064 * doc/c-ia64.texi: Likewise.
1066 2005-02-17 Alan Modra <amodra@bigpond.net.au>
1068 * tc.h (struct relax_type, relax_typeS): Move from here..
1069 * as.h: ..to here. Make rlx_forward and rlx_backward an offsetT.
1070 * ecoff.c (ecoff_new_file): Add appfile param.
1071 * ecoff.h (ecoff_new_file): Likewise.
1072 * itbl-lex.h: New file.
1073 * itbl-lex.l: Include itbl-lex.h.
1074 * itbl-parse.y: Likewise.
1075 (insntbl_line, yyparse, yylex): Move to itbl-lex.h.
1076 * read.c (s_app_file_string): Mark appfile possibly unused.
1077 * subsegs.c (seg_not_empty_p): Make sec possibly unused.
1078 * subsegs.h (struct seg_info_trash): Delete.
1079 (seg_info): Use segment_info_type instead.
1080 * config/obj-coff.c (struct filename_list): Make filename const char *.
1081 * config/obj-ecoff.h (obj_app_file): Pass app to ecoff_new_file.
1082 * config/obj-elf.c (elf_file_symbol): Similarly.
1083 * config/tc-a29k.c (md_apply_fix3): Make val a valueT. Don't use
1084 signed right shift.
1085 * config/tc-arc.c (md_operand): Warning fix.
1086 * config/tc-arm.c (arm_parse_reloc): Only define when OBJ_ELF.
1087 (md_begin): Rearrange #if defined OBJ_COFF || defined OBJ_ELF.
1088 * config/tc-cris.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Use do while.
1089 * config/tc-frv.c (frv_force_relocation): Warning fix.
1090 * config/tc-m68k.c (md_parse_option): Delete unused var.
1091 * config/tc-mcore.c (mylog2): Rename from log2 throughout.
1092 * config/tc-sparc.c: Likewise.
1093 (s_common): Warning fix.
1094 * config/tc-mips.c (append_insn): Use unsigned long long expressions.
1095 * config/tc-mmix.c (PUSHJSTUB_MAX, PUSHJSTUB_MIN): Define from
1096 addressT.
1097 * config/tc-s390.c (s390_insn): Delete test of unsigned >= 0.
1098 * config/tc-sh.c (sh_cfi_frame_initial_instructions,
1099 sh_regname_to_dw2regnum): Only define for OBJ_ELF.
1100 * config/tc-tic4x.c (tic4x_insert_reg): Use ISLOWER.
1101 (tic4x_do_align): Use TIC_NOP_OPCODE.
1102 * config/tc-tic4x.h (TIC_NOP_OPCODE): Rename from NOP_OPCODE.
1103 * config/tc-vax.c: Include netinet/in.h.
1104 (tc_headers_hook): Formatting.
1105 * config/tc-xstormy16.c (md_pcrel_from_section): Correct parens.
1107 2005-02-17 Jan Beulich <jbeulich@novell.com>
1109 * config/tc-ia64.c (ia64_parse_name): Don't advance 'name' when
1110 parsing inN, locN, outN. Set 'idx' to offset register number starts
1111 at. Don't handle numbers with leading zeroes or beyond 95. Remove
1112 pointless cast.
1114 2005-02-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1116 * config/tc-mips.c (load_address): Fix formatting.
1117 (macro): Don't use AT if .set noat is in effect. Fix formatting.
1118 Catch macros which are unexpandable without AT. Remove duplicate
1119 zeroing of used_at.
1120 (macro2): Remove duplicate zeroing of used_at.
1122 2005-02-16 Alan Modra <amodra@bigpond.net.au>
1124 * dw2gencfi.c (output_cie, output_fde): Use DW_CFA_nop rather
1125 than zero.
1127 2005-02-15 Nigel Stephens <nigel@mips.com>
1128 Maciej W. Rozycki <macro@mips.com>
1130 * config/tc-mips.c (reloc_needs_lo_p): Handle
1131 BFD_RELOC_MIPS16_HI16_S.
1132 (fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
1133 (append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
1134 and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
1135 complaints on.
1136 (mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
1137 BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
1138 Call my_getSmallExpression() to parse percent operators.
1139 (percent_op_match, mips_percent_op): Separate definitions.
1140 (mips16_percent_op): Define percent operators for the MIPS16 mode.
1141 (parse_relocation): Handle the MIPS16 mode using
1142 mips16_percent_op.
1143 (md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
1144 BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.
1146 2005-02-15 Jan Beulich <jbeulich@novell.com>
1148 * config/tc-ia64.c (md_apply_fix3): Call ia64_gen_real_reloc_type
1149 instead of explicitly dealing with the translation; exclude
1150 relocations that are already pcrel, however.
1152 2005-02-15 Jan Beulich <jbeulich@novell.com>
1154 * config/tc-ia64.c: Include limits.h (if available).
1155 (gr_values[0]): Set path to INT_MAX.
1156 (dot_reg_val): Don't allow changing value of r0. Limit range of
1157 general registers at r127.
1158 (specify_resource): Default resource index is -1. Don't set resource
1159 index (in case IA64_RS_RSE) without setting the specific flag.
1160 (note_register_values): Check operand is O_constant before tracking
1161 input value of moves. Add tracking for dep.z with constant inputs.
1162 (print_dependency): Resource index of specific resource may be zero.
1163 (check_dependencies): Likewise.
1165 2005-02-15 Jan Beulich <jbeulich@novell.com>
1167 * config/tc-ia64.c (parse_operands): New local variables reg1, reg2,
1168 reg_class. Check operands and emit diagnostics for illegal use of
1169 registers.
1171 2005-02-15 Jan Beulich <jbeulich@novell.com>
1173 * config/tc-ia64.c (ia64_gen_real_reloc_type): Define and initialize
1174 new variables type, suffix, and width. Handle
1175 BFD_RELOC_IA64_DIR(32|64)[LM]SB in FUNC_LT_FPTR_RELATIVE case.
1176 Handle BFD_RELOC_IA64_DIR64[LM]SB in FUNC_TP_RELATIVE case. Add
1177 FUNC_DTP_MODULE case. Handle BFD_RELOC_IA64_DIR32[LM]SB in
1178 FUNC_DTP_RELATIVE case. Return incoming relocation type if
1179 BFD_RELOC_IA64_IPLT[LM]SB in FUNC_IPLT_RELOC case. Generate warning
1180 if unable to translate relocation type, using the new variables.
1182 2005-02-15 Jan Beulich <jbeulich@novell.com>
1184 * config/tc-ia64.h (ia64_symbol_chars): Declare.
1185 (ty_symbol_chars): Define.
1186 * config/tc-ia64.c (ia64_symbol_chars): Define.
1188 2005-02-15 Jan Beulich <jbeulich@novell.com>
1190 * config/tc-ia64.c (ia64_parse_name): Only update next character if
1191 input_line_pointer was advanced.
1193 2005-02-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1195 * config/tc-sh.c (md_apply_fix3): Add parentheses around &
1196 within |.
1198 2005-02-13 Jan Beulich <jbeulich@novell.com>
1200 * config/tc-ia64.c (md_parse_option): Handle -xnone and -xdebugn.
1201 (md_show_usage): Add -xnone, -xdebugn, and -xdebugx. Relocate default
1202 indicator.
1203 (ia64_init): Set md.detect_dv.
1204 (ia64_start_line): New static variable warned. Warn only once when
1205 encountering explicit stops in automatic mode.
1206 * doc/c-ia64.texi: Describe -xnone, -xdebugn, and -xdebugx.
1207 * NEWS: Mention new default mode.
1209 2005-02-13 Jan Beulich <jbeulich@novell.com>
1211 * config/tc-ia64.c (dot_rot): Add comment that name strings should
1212 be freed when wiping out previous state. Canonicalize names before
1213 use. Free name string when detecting redefinition.
1214 (dot_pred_rel): Call generic expression parser to process arguments.
1215 Handle O_register case for individual predicates and O_subtract for
1216 ranges.
1217 (ia64_parse_name): Canonicalize name before looking it up in dynamic
1218 register hash.
1219 (ia64_canonicalize_symbol_name): Strip off all trailing # characters.
1220 Warn if multiple found, issue error if resulting symbol name has zero
1221 length.
1222 (dot_alias): Canonicalize name before use.
1224 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
1226 * config/tc-ia64.c (unwind_diagnostic): Return -1 for warning
1227 and 0 for error.
1228 (in_procedure): Return -1 for warning.
1229 (in_prologue): Likewise.
1230 (in_body): Likewise.
1232 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
1234 * config/tc-ia64.c (dot_xdata): Undo the last change.
1235 (dot_float_cons): Likewise.
1236 (dot_xstringer): Likewise.
1237 (dot_xdata_ua): Likewise.
1238 (dot_float_cons_ua): Likewise.
1240 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
1242 * NEWS: Mention "-munwind-check=[warning|error]".
1244 * config/tc-ia64.c (md): Add unwind_check.
1245 (unwind_diagnostic): New.
1246 (in_procedure): Call unwind_diagnostic when a directive isn't
1247 in procedure.
1248 (in_prologue): Call unwind_diagnostic when a directive isn't in
1249 prologue.
1250 (in_body): Call unwind_diagnostic when a directive isn't in
1251 body region.
1252 (dot_endp): Set md.unwind_check to error before calling
1253 in_procedure and restore it after. When the name is missing or
1254 couldn't be found, use the one from the last .proc if
1255 md.unwind_check isn't error. Warn if md.unwind_check is
1256 warning.
1257 (md_parse_option): Handle "-munwind-check=[warning|error]".
1258 (md_show_usage): Add "-munwind-check=[warning|error]".
1259 (ia64_init): Set md.unwind_check to warning.
1261 * doc/as.texinfo: Add "-munwind-check=[none|warning|error]".
1262 * doc/c-ia64.texi: Likewise.
1264 2005-02-11 Jan Beulich <jbeulich@novell.com>
1266 * config/tc-ia64.h (LEX_AT): Include LEX_BEGIN_NAME.
1267 (LEX_QM): Likewise.
1268 (ia64_parse_name): New third parameter.
1269 (md_parse_name): Pass third argument.
1270 * config/tc-ia64.c (pseudo_func): Placeholders use NULL as name.
1271 (md_operand): Handling of '@'-prefixed symbols moved from here...
1272 (ia64_parse_name): ...to here.
1274 2005-02-11 Jan Beulich <jbeulich@novell.com>
1276 * config/tc-ia64.c (md): Remove last_groups and group_idx.
1277 (errata_nop_necessary_p): Remove declaraction and definition.
1278 (emit_one_bundle): Don't call errata_nop_necessary_p. Don't
1279 update md.group_idx. Don't reset md.last_groups.
1281 2005-02-11 Jan Beulich <jbeulich@novell.com>
1283 * config/tc-ia64.c (parse_section_name): Handle non-quoted first
1284 argument.
1285 (dot_xdata): Free section name after use.
1286 (dot_float_cons): Likewise.
1287 (dot_xstringer): Likewise.
1288 (dot_xdata_ua): Likewise.
1289 (dot_float_cons_ua): Likewise.
1290 (md_pseudo_table): Add xdata16 and xdata16.ua.
1292 2005-02-10 H.J. Lu <hongjiu.lu@intel.com>
1294 * doc/all.texi: Add IA64.
1295 * doc/as.texinfo: Likewise.
1297 * doc/c-ia64.texi: Fix typos.
1299 2005-02-10 Julian Brown <julian@codesourcery.com>
1301 * config/tc-arm.c (do_t_ldmstm): Change BFD_RELOC_NONE to
1302 BFD_RELOC_UNUSED.
1303 (do_t_push_pop): Likewise.
1304 (md_assemble): Likewise.
1305 (md_apply_fix3): Handle BFD_RELOC_NONE correctly, make
1306 BFD_RELOC_UNUSED same as previous meaning of BFD_RELOC_NONE.
1307 (create_unwind_entry): Output dependency on the required personality
1308 routines.
1309 testsuite/gas/arm/unwind.d: Alter expected output to include
1310 dependency on __aeabi_unwind_cpp_pr[01].
1312 2005-02-07 Nathan Sidwell <nathan@codesourcery.com>
1314 * as.h (seg_not_empty_p): Return int, not bfd_boolean.
1315 * subsegs.c (seg_not_empty_p): Likewise.
1317 2005-02-07 Inderpreet Singh <inderpreetb@noida.hcltech.com>
1319 * config/tc-maxq.c (md_estimate_size_before_relax): Correct the
1320 relative jump calculation.
1321 <md_convert_frag) : Likewise.
1322 <output_disp): Likewise.
1324 2005-02-07 Hans-Peter Nilsson <hp@axis.com>
1326 * write.c (write_object_file): Recognize warning-symbol construct
1327 and skip object- and target- handling for the second symbol.
1329 2005-02-02 Jan Beulich <jbeulich@novell.com>
1331 * config/tc-ia64.c (dot_pred_rel): Update comment. Handle @-prefixed
1332 designators along with quoted ones. Free copy of quoted designator
1333 when done.
1335 2005-02-01 Ben Elliston <bje@au.ibm.com>
1337 * config/atof-ieee.c, config/obj-coff.c, config/obj-elf.c,
1338 config/obj-ieee.c, config/obj-som.c, config/obj-vms.c,
1339 config/tc-a29k.c, config/tc-alpha.c, config/tc-arc.c,
1340 config/tc-arm.c, config/tc-d30v.c, config/tc-dlx.c,
1341 config/tc-fr30.c, config/tc-h8300.c, config/tc-h8500.c,
1342 config/tc-i370.c, config/tc-i386.c, config/tc-i960.c,
1343 config/tc-ia64.c, config/tc-m32r.c, config/tc-m32r.h,
1344 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-mips.c,
1345 config/tc-mn10200.c, config/tc-msp430.c, config/tc-ns32k.c,
1346 config/tc-openrisc.c, config/tc-or32.c, config/tc-pdp11.c,
1347 config/tc-pj.c, config/tc-sparc.h, config/tc-tic54x.c,
1348 config/tc-tic80.c, config/tc-v850.c, config/tc-w65.c,
1349 config/tc-xtensa.c, config/tc-z8k.c, config/xtensa-relax.c: Remove
1350 #if 0'd code throughout.
1352 2005-01-31 Nick Clifton <nickc@redhat.com>
1354 * as.c (parse_args): Bump copyright date reported by --version to
1355 2005.
1357 2005-01-31 Nick Clifton <nickc@redhat.com>
1359 * configure.tgt: Remove obsolete targets m68k-lynxos, sparc-lynxos
1360 and vax-vms.
1362 2005-01-31 Jan Beulich <jbeulich@novell.com>
1364 * macro.c (buffer_and_nest): Allow 'from' being NULL; handle anything
1365 that can end with .endr in that case. Make requiring/permitting
1366 pseudo-ops without leading dot closer to the logic in read.c serving
1367 the same purpose.
1368 (expand_irp): Don't pass a mnemonic to buffer_and_nest as it will be
1369 ignored.
1371 2005-01-31 Jan Beulich <jbeulich@novell.com>
1373 * macro.c (do_formals): Adjust to no longer accept empty parameter
1374 names.
1375 (define_macro): Adjust to no longer accept empty macro name, garbage
1376 following the parameters, or macros that were previously defined.
1377 * read.c (s_bad_end): Declare.
1378 (potable): Add endm. Handler for endr and endm is s_bad_end.
1379 (s_bad_end): Rename from s_bad_endr. Adjust to handle both .endm
1380 and .endr.
1381 * read.h (s_bad_endr): Remove.
1383 2005-01-31 Jan Beulich <jbeulich@novell.com>
1385 * config/tc-ia64.c (parse_operands): Parse all specified operands,
1386 immediately discarding (but counting) those exceeding the maximum
1387 possible amount. Track whether output and input operand counts ever
1388 matched, and use this to better indicate which of the operands/
1389 operand types was wrong; specifically don't default to pointing to
1390 the first operand.
1392 2005-01-31 Jan Beulich <jbeulich@novell.com>
1394 * config/tc-ia64.c (unwind): Remove proc_end (now an automatic
1395 variable in dot_endp). Add body and insn. Make prologue,
1396 prologue_mask, body, and insn bitfields.
1397 (fixup_unw_records): Remove spurious new-lines from end of diagnostic
1398 messages.
1399 (in_procedure, in_prologue, in_body): New.
1400 (dot_fframe, dot_vframe, dot_vframesp, dot_vframepsp, dot_save,
1401 dot_restore, dot_restorereg, dot_restorereg_p, dot_handlerdata,
1402 dot_unwentry, dot_altrp, dot_savemem, dot_saveg, dot_savef, dot_saveb,
1403 dot_savegf, dot_spill, dot_spillreg, dot_spillmem, dot_spillreg_p,
1404 dot_spillmem_p, dot_label_state, dot_copy_state, dot_unwabi,
1405 dot_personality): Use the appropriate one of the above.
1406 (dot_proc): Clear unwind.proc_start; set to current location only if
1407 none of the entry points were valid. Check for non-zero-length entry
1408 point names. Check that entry points aren't defined, yet. Clear
1409 unwind.prologue, unwind.body, and unwind.insn.
1410 (dot_body): Call in_procedure. Check that first directive in procedure
1411 had no insns emitted before. Set unwind.body.
1412 (dot_prologue): Call in_procedure. Check that not already in prologue.
1413 Check that first directive in procedure had no insns emitted before.
1414 Clear unwind.body.
1415 (dot_endp): Call in_procedure. Declare proc_end. Check for non-zero-
1416 length entry point names. Check that entry points became defined.
1417 (md_assemble): Set unwind.insn once unwind.proc_start is defined.
1419 2005-01-31 Jan Beulich <jbeulich@novell.com>
1421 * config/tc-ia64.c (emit_one_bundle): Snapshot manual bundling state
1422 before actually using it. Don't generate an error in manual bundling
1423 mode when looking at an insn requiring slot 2 but not yet at slot 2.
1424 Don't generate an error in manual bundling mode when looking at an
1425 insn required to be last in its group but the required slot hasn't
1426 been reached, yet. Allow conversion from MII to MI;I for bundle
1427 consisting of only 2 insns with the stop between them. Suppress
1428 various meaningless errors resulting from detecting earlier ones.
1430 2005-01-31 Jan Beulich <jbeulich@novell.com>
1432 * config/tc-ia64.c (parse_operands): Also handle alloc without first
1433 input being ar.pfs.
1435 2005-01-28 Christian Groessler <chris@groessler.org>
1437 * config/tc-z8k.c (md_assemble): Improve error detection.
1439 2005-01-28 Jan Beulich <jbeulich@novell.com>
1441 * config/tc-ia64.c (ia64_estimate_size_before_relax): Allocate space
1442 for personality routine pointer only if there is one.
1443 (ia64_convert_frag): Likewise.
1444 (generate_unwind_image): Likewise.
1446 2005-01-27 Christian Groessler <chris@groessler.org>
1448 * config/tc-z8k.c (INSERT): Remove, not used anywhere.
1449 (md_apply_fix3): Make relative branches out of range an error
1450 instead of a warning. Display correct line number for out of
1451 range branches/calls/memory accesses.
1453 2005-01-27 Nathan Sidwell <nathan@codesourcery.com>
1455 * dwarf2dbg.c (dwarf2_finish): Correct logic for determining when
1456 to emit .debug_line and other debug sections.
1457 * as.h (seg_not_empty_p): Declare.
1458 * subsegs.c (seg_not_empty_p): New predicate.
1460 2005-01-27 Andrew Cagney <cagney@gnu.org>
1462 * configure: Regenerate to track ../gettext.m4 change.
1464 2005-01-27 Jan Beulich <jbeulich@novell.com>
1466 * config/tc-ia64.c (emit_one_bundle): Change "?imbf??" to "?ibmfxx".
1468 2005-01-27 Jan Beulich <jbeulich@novell.com>
1470 * config/tc-ia64.c (emit_one_bundle): Add late resolution of move
1471 to/from application registers dynamic insns.
1472 (md_assemble): Defer resolution of move to/from application registers
1473 dynamic insns when they can be issued on either the I- or M-units.
1475 2005-01-25 Alexandre Oliva <aoliva@redhat.com>
1477 * config/tc-frv.c (md_apply_fix3): Mark TLS symbols as such.
1478 2004-12-10 Alexandre Oliva <aoliva@redhat.com>
1479 * config/tc-frv.c (frv_pic_ptr): Add tlsmoff support.
1480 2004-11-10 Alexandre Oliva <aoliva@redhat.com>
1481 * cgen.c (gas_cgen_parse_operand): Handle
1482 CGEN_PARSE_OPERAND_SYMBOLIC.
1483 * config/tc-frv.c (md_cgen_lookup_reloc): Handle TLS relocations.
1484 (frv_force_relocation): Likewise. Fix handling of PIC
1485 relocations.
1486 (md_apply_fix3): Likewise.
1488 2005-01-21 Ben Elliston <bje@au.ibm.com>
1490 * as.h: Remove #if 0'd code.
1491 * atof-generic.c (atof_generic): Likewise.
1492 * ecoff.c (ecoff_directive_frame): Likewise.
1493 * frags.h (FRAG_APPEND_1_CHAR): Likewise.
1494 * itbl-ops.c (itbl_add_reg): Likewise.
1495 * listing.c (calc_hex): Likewise.
1496 * read.c (MASK_CHAR): Likewise.
1497 * subsegs.c (subsegs_print_statistics): Likewise.
1498 * symbols.c (indent): Likewise.
1499 * write.c (write_relocs): Likewise.
1500 (write_object_file): Likewise.
1501 (relax_frag): Likewise.
1503 2005-01-20 Nick Clifton <nickc@redhat.com>
1505 * as.c (std_longopts): Add an entry for "--a" in order to prevent
1506 getopt_long_only() from considering -a as an abbreviation for
1507 --alternate.
1508 (parse_args): Fix the parsing of -a=<file>.
1510 2005-01-20 Alan Modra <amodra@bigpond.net.au>
1512 PR gas/684
1513 * read.c (s_incbin): Adjust default count for skip. Check validity
1514 of count and skip rigorously.
1516 2005-01-19 Fred Fish <fnf@specifixinc.com>
1518 * config/tc-mips.c (dummy_opcode): Add init for new struct member.
1520 2005-01-19 Richard Sandiford <rsandifo@redhat.com>
1522 * read.c (convert_to_bignum): New function, split out from...
1523 (emit_expr): ...here. Handle the case where X_add_number is
1524 positive and the input value is negative.
1525 (output_big_sleb128): Fix setting of continuation bit. Check whether
1526 the final byte needs to be sign-extended. Fix size-shrinking loop.
1527 (emit_leb128_expr): When generating a signed leb128, see whether the
1528 sign of an O_constant's X_add_number matches the sign of the input
1529 value. Use a bignum if not.
1531 2005-01-17 Andrew Stubbs <andrew.stubbs@st.com>
1533 * tc-sh.c (md_begin,md_parse_option): Change arch_sh1_up to
1534 arch_sh_up in order to match the external name and make the
1535 testsuite's job easier.
1537 2005-01-14 H.J. Lu <hongjiu.lu@intel.com>
1539 PR 659
1540 * config/tc-i386.c (i386_scale): Disallow 0 scale.
1542 2005-01-12 Nick Clifton <nickc@redhat.com>
1544 * config/tc-iq2000.c (s_iq2000_set): Fix thinko parsing
1545 ignored_arguments array.
1547 2005-01-10 H.J. Lu <hongjiu.lu@intel.com>
1549 * write.c (write_object_file): Disallow a symbol equated to
1550 common symbol.
1552 2005-01-10 Inderpreet Singh <inderpreetb@noida.hcltech.com>
1554 * tc-maxq.c: Replace constants 10 and 20 with bfd_mach_maxq10 and
1555 bfd_mach_maxq20.
1556 (md_pseudo_table): Add new pseudo ops for maxq10 and maxq20.
1557 (maxq_target): New function: Set the machine type.
1559 2005-01-06 Paul Brook <paul@codesourcery.com>
1561 * config/tc-arm.c (FPU_DEFAULT): Define for TE_VXWORKS.
1562 (md_begin): Handle TE_VXWORKS for FP defaults.
1563 (md_apply_fix3): Correct rela offsets.
1564 (elf32_arm_target_format): Add VxWorks targets.
1566 2005-01-06 Paul Brook <paul@codesourcery.com>
1568 * configure.tgt: Set em=vxworks for *-*-vxworks.
1569 * config/te-vxworks.h: New File.
1571 2005-01-06 Paul Brook <paul@codesourcery.com>
1573 * config/tc-arm.c (arm_cpus): Correct arch field for arm1026ej-s.
1575 2005-01-04 Dmitry Diky <diwil@spec.ru>
1577 * config/tc-msp430.c (md_apply_fix3): Fix offset calculation for
1578 global label.
1580 2005-01-03 David Mosberger <davidm@hpl.hp.com>
1582 * config/tc-ia64.c (md): Add member "loc_directive_seen".
1583 (dot_loc): New function.
1584 (md_pseudo_table): Add entry to map .loc to dot_loc().
1585 (emit_one_bundle): Only call dwarf2_gen_line_info() if we have
1586 seen a .loc directive or we're generating DWARF2 debug info for
1587 assembly source.
1589 2004-12-29 Alan Modra <amodra@bigpond.net.au>
1591 PR gas/619
1592 * read.c (s_comm_internal): Don't zero end of name until size
1593 expression has been parsed.
1595 2004-12-25 Marek Michalkiewicz <marekm@amelek.gda.pl>
1597 * config/tc-avr.c (mcu_types): Move attiny{13,2313} from avr4 to avr2.
1599 2004-12-23 Tomer Levi <Tomer.Levi@nsc.com>
1601 * config/tc-crx.c: Support 'bcop' relaxation (dealt as in 'cmp&branch'
1602 case).
1604 2004-12-22 Ian Lance Taylor <ian@airs.com>
1606 * configure.tgt: New.
1607 * configure.in: Move setting of cpu_type, fmt, etc., to
1608 configure.tgt.
1609 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
1610 $(srcdir)/configure.tgt.
1611 * configure, Makefile.in: Rebuild.
1613 2004-12-22 Klaus Rudolph <lts-rudolph@gmx.de>
1615 * config/tc-avr.c: Add support for the new R_AVR_LDI, R_AVR_6 and
1616 R_AVR_6_ADIW relocs for the LDI, ADIW/SBIW and LDD/STD
1617 instructions.
1618 (avr_offset_expression): New function to parse offsets for LDI
1619 instructions.
1620 (avr_operand): Use it.
1621 (md_apply_fix3): Generate the relocs.
1623 2004-12-16 Andrew Stubbs <andrew.stubbs@st.com>
1625 * config/tc-sh64.c (shmedia_md_apply_fix3): Add missing
1626 BFD_RELOC_SH_IMMS10BY8 relocation.
1628 * config/tc-sh64.c (shmedia_build_Mytes): Emit an error message rather
1629 than just ignoring bad code.
1631 2004-12-16 Richard Sandiford <rsandifo@redhat.com>
1633 * config/tc-v850.c (handle_lo16): New function.
1634 (v850_reloc_prefix): Use it to check lo().
1635 (md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.
1637 2004-12-14 P.J. Darcy <darcypj@us.ibm.com>
1639 * configure.in: Add s390x-ibm-tpf support.
1640 * configure: Regenerate.
1642 2004-12-15 Jan Beulich <jbeulich@novell.com>
1644 * config/obj-elf.c (obj_elf_change_section): Only set type and
1645 attributes on new sections. Emit warning when type of re-declared
1646 section doesn't match.
1648 2004-12-15 Jan Beulich <jbeulich@novell.com>
1650 * dw2gencfi.c (dot.cfi.startproc): Clear cur_cfa_offset so
1651 '.cfi_startproc simple' doesn't inherit the old value.
1653 2004-12-15 Jan Beulich <jbeulich@novell.com>
1655 * dw2gencfi.c (output_cfi_insn): Adjust DW_CFA_def_cfa_sf generation
1656 to emit a signed and factored offset. Adjust DW_CFA_def_cfa_offset_sf
1657 generation to emit a factored offset.
1659 2004-12-10 Ian Lance Taylor <ian@wasabisystems.com>
1661 * config/tc-mips.c (macro) [M_LA_AB]: Give an error for a offset
1662 which is too large in the case of NO_PIC without 64-bit
1663 addresses.
1665 * config/tc-mips.c (mips_in_shared): New static variable.
1666 (macro_build_lui): Permit "_gp" if !mips_in_shared.
1667 (md_longopts): Add -mshared and -mno-shared.
1668 (md_parse_option): Handle OPTION_MSHARED and OPTION_MNO_SHARED.
1669 (s_cpload): Implement !mips_in_shared case.
1670 (s_cpsetup): Likewise.
1671 * doc/c-mips.texi (MIPS Opts): Document -mno-shared.
1672 * NEWS: Mention -mno-shared.
1674 2004-12-09 Paul Brook <paul@codesourcery.com>
1676 * config/tc-arm.c (s_arm_unwind_fnend): Use R_ARM_PREL31 relocation
1677 for function start.
1679 2004-12-09 Ian Lance Taylor <ian@wasabisystems.com>
1681 * config/tc-mips.c (append_insn): If we emit a nop during a relax
1682 sequence, increase the size of the sequence.
1684 * config/tc-mips.c (mips_cpu_info_table): Change "9000" entry to
1685 use CPU_RM9000.
1687 2004-12-07 Ben Elliston <bje@gnu.org>
1689 * read.c (s_align): Use an align_limit temporary to allay a GCC
1690 signed/unsigned comparison warning.
1692 2004-12-01 Mark Mitchell <mark@codesourcery.com>
1694 * Makefile.am (TARG_ENV_HFILES): Add te-armlinuxeabi.h.
1695 * configure.in: Use it for arm*-*-linux-gnueabi*.
1696 * config/tc-arm.c: Allow emulation file to set FPU_DEFAULT.
1697 * config/te-armlinuxeabi.h: New file.
1698 * Makefile.in: Regenerated.
1699 * aclocal.m4: Likewise.
1700 * configure: Likewise.
1701 * doc/Makefile.in: Regenerated.
1703 2004-12-02 Bob Wilson <bob.wilson@acm.org>
1705 * config/tc-xtensa.c (xtensa_switch_section_emit_state): Use subseg_set.
1706 (xtensa_restore_emit_state): Likewise.
1708 2004-12-02 Alan Modra <amodra@bigpond.net.au>
1710 * read.c (ALIGN_LIMIT): Define, increasing limit for BFD_ASSEMBLER.
1711 (s_align): Use it.
1713 2004-11-30 Tero Niemela <tero_niemela@yahoo.com>
1715 * Makefile.am: Change LOCALEDIR to $(datadir)/share.
1716 * Makefile.in: Regenerate.
1718 2004-11-29 Tomer Levi <Tomer.Levi@nsc.com>
1720 * config/tc-crx.c: Major code cleanup. Remove unused variables and
1721 functions, give functions a meaningful name, add comments.
1722 (check_range): New function - Replace operand size calculation
1723 with range checking.
1724 (assemble_insn): Update Algorithm, improve error issuing.
1725 (enum op_err): New.
1726 (process_label_constant): Bug fix regarding COP_BRANCH_INS relocation
1727 handling.
1729 2004-11-29 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
1731 * config/tc-m32r.c (md_pcrel_from_section): Fixed a pcrel relocte
1732 miss between different section in the same module.
1733 (tc_gen_reloc): Likewise.
1735 2004-11-25 Theodore A. Roth <troth@openavr.org>
1737 * gas/config/tc-avr.c (mcu_types): Add support for atmega165,
1738 atmega325, atmega3250, atmega645 and atmega6450.
1740 2004-11-25 Jan Beulich <jbeulich@novell.com>
1742 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
1743 permissible for the selected instruction suffix.
1744 (process_suffix): For DefaultSize instructions, suppressing the
1745 guessing of a 'q' suffix if the instruction doesn't support it is
1746 pointless, because only an 'l' suffix can be guessed in this place.
1748 2004-11-24 Nick Clifton <nickc@redhat.com>
1750 * config/tc-iq2000.c: Remove support for IQ10 processor.
1751 Convert to ISO C90 formatting.
1752 * config/tc-iq2000.h: Likewise.
1754 2004-11-23 Nick Clifton <nickc@redhat.com>
1756 * config/tc-mn10300.c (md_relax_table): More fixes to the offsets
1757 in this table. They should be correct now.
1759 2004-11-23 Jan Beulich <jbeulich@novell.com>
1761 * config/tc-i386.h (CpuMMX2): Declare. Artificial classifier to
1762 indicate the MMX extensions added by both SSE and 3DNow!A.
1763 (Cpu3dnowA): Declare.
1764 (CpuUnknownFlags): Update.
1765 * config/tc-i386.c (cpu_sub_arch_name): Declare.
1766 (cpu_arch): i586 and pentium do not imply MMX. i686 and pentiumpro do
1767 neither imply SSE nor MMX. k6 implies MMX. k6_2 additionally implies
1768 3DNow!. Athlon additionally implies 3DNow!A. Several new
1769 entries (those starting with a dot are for sub-arch specification).
1770 (set_cpu_arch): Handle sub-arch specifications.
1771 (parse_insn): Distinguish between instructions not supported because
1772 of insufficient CPU features and because of 64-bit mode.
1773 * doc/c-i386.texi: Describe enhanced .arch directive.
1775 2004-11-22 Bob Wilson <bob.wilson@acm.org>
1777 * config/tc-xtensa.c (xg_add_opcode_fix): Set fx_no_overflow.
1779 2004-11-22 Bob Wilson <bob.wilson@acm.org>
1781 * dwarf2dbg.c (dwarf2_finish): Don't write a .debug_line section
1782 without a corresponding .debug_info section.
1784 2004-11-22 Hans-Peter Nilsson <hp@axis.com>
1786 * read.c (potable): Add "error" and "warning".
1787 (s_errwarn): New function.
1788 * read.h (s_errwarn): Declare.
1789 * doc/as.texinfo (Error, Warning): Document .error and .warning.
1791 2004-11-22 Nick Clifton <nickc@redhat.com>
1793 * config/tc-tic54x.c (tic54x_adjust_symtab): Adjust call to
1794 c_dot_file_symbol.
1796 2004-11-19 Alan Modra <amodra@bigpond.net.au>
1798 * config/tc-msp430.c (struct rcodes_s, MSP430_RLC, msp430_rcodes,
1799 struct hcodes_s, msp430_hcodes): From include/opcode/msp430.h.
1801 2004-11-19 Alan Modra <amodra@bigpond.net.au>
1803 * config/obj-coff.c (c_dot_file_symbol): Add "app" param.
1804 (coff_adjust_symtab): Adjust call.
1805 (crawl_symbols): Likewise.
1806 * config/obj-coff.h (c_dot_file_symbol): Add "app" param.
1807 (obj_app_file): Adjust.
1809 2004-11-18 Inderpreet Singh <inderpreetb@nioda.hcltech.com>
1811 * configure.in: Enable bfd_assember for the MAXQ port.
1812 * configure: Regenerate.
1814 2004-11-12 Bob Wilson <bob.wilson@acm.org>
1815 Sterling Augustine <sterling@tensilica.com>
1817 * config/tc-xtensa.c (finish_vinsn): Clear pending instruction if
1818 there is a conflict.
1819 (check_t1_t2_reads_and_writes): Check for both reads and writes to
1820 interfaces that are related as determined by xtensa_interface_class_id.
1822 2004-11-12 Nick Clifton <nickc@redhat.com>
1824 * config/tc-mn10300.c (md_relax_table): Fix off by one negative
1825 offsets for conditional branches.
1827 2004-11-11 Bob Wilson <bob.wilson@acm.org>
1829 * config/tc-xtensa.c (MAX_IMMED6): Change value to 65.
1831 2004-11-10 Bob Wilson <bob.wilson@acm.org>
1833 * config/tc-xtensa.c (update_next_frag_state): Always add a NOP if
1834 relaxing at the end of a loop. Don't mark frags as UNREACHABLE or
1835 MAYBE_UNREACHABLE.
1836 (relax_frag_immed): Update call to update_next_frag_state.
1838 2004-11-10 Alan Modra <amodra@bigpond.net.au>
1840 * obj.h (struct format_ops <app_file>): Add int param.
1841 * read.h (s_app_file_string): Likewise.
1842 * read.c (s_app_file_string): Likewise.
1843 (s_app_file): Adjust s_app_file_string call.
1844 * config/tc-mips.c (s_mips_file): Likewise.
1845 * config/obj-coff.h (obj_app_file): Add app param.
1846 * config/obj-ecoff.h (obj_app_file): Likewise.
1847 * config/obj-multi.h (obj_app_file): Likewise.
1848 * config/obj-elf.h (elf_file_symbol): Likewise.
1849 * config/obj-elf.c (elf_file_symbol): Only emit one file symbol
1850 if called for # preprocessor lines.
1852 2004-11-08 H.J. Lu <hongjiu.lu@intel.com>
1854 PR 528
1855 * symbols.c (resolve_symbol_value): Convert weak symbols only
1856 for Windows PECOFF.
1857 (symbol_equated_reloc_p): Don't equate weaks when relocating
1858 only for Windows PECOFF.
1860 2004-11-08 Tomer Levi <Tomer.Levi@nsc.com>
1862 * config/tc-crx.c (print_insn): Check and set insn_addr.
1863 * config/tc-crx.h (md_frag_check): Define.
1865 2004-11-08 Inderpreet Singh <inderpreetb@nioda.hcltech.com>
1866 Vineet Sharma <vineets@noida.hcltech.com>
1868 * configure.in: Add support for new target maxq-coff.
1869 * configure: Regenerate.
1870 * NEWS: Mention new support.
1871 * config/tc-maxq.c: New file.
1872 * config/tc-maxq.h: New file.
1873 * config/obj-coff.h: Add support for maxq-coff.
1875 2004-11-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1877 * symbols.c (any_external_name): Define.
1878 (resolve_symbol_value): Convert weak symbols.
1879 (S_SET_EXTERNAL): Support any_external_name.
1880 (S_SET_NAME): Qualify parameter const.
1881 (symbol_equated_reloc_p): Equate to weaks when relocating.
1882 * symbols.h (S_SET_NAME): Qualfiy parameter const.
1883 * tc.h (any_external_name): Declare.
1884 * config/obj-coff.c ("coff/pe.h"): Include for BFD
1885 assemblers also.
1886 (weak_is_altname): Declare and define.
1887 (weak_name2altname): Same.
1888 (weak_altname2name): Same.
1889 (weak_uniquify): Same.
1890 (weak_altprefix): Define.
1891 (obj_coff_weak): Change .weak syntax and handling.
1892 (coff_frob_symbol): Fix PE weak symbol alternates.
1893 * config/obj-coff.h (USE_UNIQUE): Define.
1894 * config/tc-i386.c (md_apply_fix3): Assume weak symbols
1895 are in another segment.
1896 (tc_gen_reloc): Remove broken addend hack.
1897 doc/as.texinfo: Update.
1899 2004-11-05 Sterling Augustine <sterling@tensilica.com>
1901 * config/tc-xtensa.c (total_frag_text_expansion): New.
1902 (md_estimate_size_before_relax): Use it.
1903 (find_address_of_next_align_frag): Likewise.
1905 2004-11-05 Tomer Levi <Tomer.Levi@nsc.com>
1907 * config/tc-crx.c: Rename argument types.
1908 (processing_arg_number): Rename to 'cur_arg_num'.
1909 (get_number_of_bits): Rename to 'set_operand_size'.
1910 (get_operandtype): Rename to 'parse_operand', totally rewrite.
1911 (set_cons_rparams): Rename to 'set_operand', totally rewrite.
1912 (set_indexmode_parameters): Remove function, integrate its code into
1913 'set_operand'.
1914 (set_operand_size): Get rid of 'Operand Number' function parameter -
1915 use global variable 'cur_arg_num' instead.
1916 Use a local 'argument' pointer to reference the current argument.
1917 (parse_operand): Likewise.
1918 (set_operand): Likewise.
1919 (process_label_constant): Likewise.
1921 2004-11-04 Bob Wilson <bob.wilson@acm.org>
1923 * config/tc-xtensa.c: Remove XTENSA_SECTION_RENAME ifdefs.
1924 (add_section_rename): Delete. Inlined into...
1925 (build_section_rename): ...here. Use xstrdup instead of strdup.
1926 (xtensa_section_rename): Drop "const" from argument and return types.
1927 (md_show_usage): Indent to match show_usage().
1928 * config/tc-xtensa.h: Remove XTENSA_SECTION_RENAME ifdefs.
1929 (tc_canonicalize_section_name): Define.
1930 (md_elf_section_rename): Remove unused macro.
1931 * doc/as.texinfo (Overview): Document Xtensa --rename-section option.
1932 * doc/c-xtensa.texi (Xtensa Options): Likewise.
1933 (Frame Directive): Delete.
1935 2004-11-04 Daniel Jacobowitz <dan@debian.org>
1937 * configure.in: Remove arm-*-oabi and thumb-*-oabi.
1938 * config/tc-arm.c (target_oabi): Delete.
1939 (md_apply_fix3, elf32_arm_target_format): Remove target_oabi checks.
1940 (arm_opts): Remove moabi.
1941 * doc/as.texinfo (Overview): Remove documentation of -moabi.
1942 * doc/c-arm.texi (ARM Options): Likewise.
1943 * configure: Regenerated.
1945 2004-11-04 Hans-Peter Nilsson <hp@axis.com>
1947 * configure.in (crisv32): Recognize. AC_DEFINE_UNQUOTED
1948 DEFAULT_CRIS_ARCH. Handle crisv32-*-linux-gnu* like
1949 cris-*-linux-gnu* and crisv32-*-* like cris-*-*.
1950 * configure: Regenerate.
1951 * config/tc-cris.c (enum cris_archs): New.
1952 (cris_mach, cris_arch_from_string, s_cris_arch, get_sup_reg)
1953 (cris_insn_ver_valid_for_arch): New functions.
1954 (DEFAULT_CRIS_ARCH): New macro, default to cris_any_v0_v10.
1955 (cris_arch): New variable.
1956 (md_pseudo_table): New pseudo .arch.
1957 (err_for_dangerous_mul_placement): Initialize according to
1958 DEFAULT_CRIS_ARCH.
1959 (STATE_COND_BRANCH): Renamed from STATE_CONDITIONAL_BRANCH.
1960 All users changed.
1961 (STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON)
1962 (STATE_ABS_BRANCH_V32, STATE_LAPC, BRANCH_BF_V32, BRANCH_BB_V32)
1963 (BRANCH_WF_V32, BRANCH_WB_V32): New.
1964 (BRANCH_BF, BRANCH_BB, BRANCH_WF, BRANCH_WB): Don't undef after
1965 use in md_cris_relax_table.
1966 (md_cris_relax_table): Add entries for STATE_COND_BRANCH_V32,
1967 STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
1968 Update and improve head comment.
1969 (OPTION_PIC): Define in terms of previous option, OPTION_US.
1970 (OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): Similar.
1971 (OPTION_ARCH): New.
1972 (md_longopts): New option --march=...
1973 (cris_any_v0_v10_long_jump_size, crisv32_long_jump_size): New
1974 macros.
1975 (md_long_jump_size): Initialize in terms of DEFAULT_CRIS_ARCH.
1976 (HANDLE_RELAXABLE): New macro.
1977 (md_estimate_size_before_relax): Use HANDLE_RELAXABLE for common
1978 cases. Check for weak symbols and assume not relaxable. Handle
1979 STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON,
1980 STATE_ABS_BRANCH_V32, STATE_LAPC. Use new variable symbolP, not
1981 fragP->fr_symbol.
1982 (md_convert_frag): Handle STATE_COND_BRANCH_V32,
1983 STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
1984 (cris_create_short_jump): Adjust for CRISv32.
1985 (cris_relax_frag): Handle new states.
1986 (md_create_long_jump): Ditto. Emit error for common_v10_v32.
1987 (md_begin): Define symbols "..asm.arch.cris.v32",
1988 "..asm.arch.cris.v10", "..asm.arch.cris.common_v10_v32" and
1989 "..asm.arch.cris.any_v0_v10". Use cris_insn_ver_valid_for_arch
1990 when entering opcode table entry points.
1991 (md_assemble): Adjust branch handling for CRISv32. Handle LAPC
1992 relaxation. In fix_new_exp call for main insn, pass 1 for pcrel
1993 parameter for 8, 16 and 32-bit pc-relative insns and LAPC.
1994 (cris_process_instruction): Initialize out_insnp->insn_type to
1995 CRIS_INSN_NONE, not CRIS_INSN_NORMAL.
1996 <case ']', '[', 'A', 'd', 'Q', 'N', 'n', 'Y', 'U', 'u', 'T'>: New
1997 cases.
1998 <case 'm'>: Check that modified_char == '.'.
1999 <invalid operands>: Consume the rest of the line.
2000 When operands don't match, skip over subsequent insns with
2001 non-matching version specifier but same mnemonic.
2002 <immediate constant, case SIZE_SPEC_REG>: Immediate operands for
2003 special registers in CRISv32 are always 32 bit long.
2004 <immediate constant, case SIZE_FIELD_SIGNED, SIZE_FIELD_UNSIGNED>:
2005 New cases.
2006 (get_gen_reg): Only recognize "PC" when followed by "+]" for v32
2007 and compatible. Recognize "ACR" for v32, unless followed by "+".
2008 (get_spec_reg): Consider cris_arch when looking up register.
2009 (get_autoinc_prefix_or_indir_op): Don't recognize assignment for
2010 v32 or compatible.
2011 (get_3op_or_dip_prefix_op): Check for ']' after seeing '[rN+'.
2012 (cris_get_expression): Restore input_line_pointer if failing "early".
2013 (get_flags): Consider cris_arch and recognize flags accordingly.
2014 (branch_disp): Adjust for CRISv32.
2015 (gen_cond_branch_32): Similar. Emit error for common_v10_v32.
2016 (cris_number_to_imm): Use as_bad_where, not as_bad. Remove
2017 related FIXME. Don't insist on BFD_RELOC_32_PCREL fixup to be
2018 resolved. Don't enter zeros in object file for
2019 BFD_RELOC_32_PCREL.
2020 <case BFD_RELOC_CRIS_LAPCQ_OFFSET, BFD_RELOC_CRIS_SIGNED_16>
2021 <case BFD_RELOC_CRIS_SIGNED_8>: New case.
2022 (md_parse_option): Break out "return 1".
2023 <OPTION_ARCH> New case.
2024 (tc_gen_reloc): <case BFD_RELOC_CRIS_LAPCQ_OFFSET>
2025 <case BFD_RELOC_CRIS_SIGNED_16, BFD_RELOC_CRIS_SIGNED_8>
2026 <case BFD_RELOC_CRIS_UNSIGNED_8, BFD_RELOC_CRIS_UNSIGNED_16>
2027 <case BFD_RELOC_32_PCREL>: New cases.
2028 Addends for non-zero fx_pcrel are too in fx_offset.
2029 (md_show_usage): Show --march=<arch>.
2030 (md_apply_fix3): Adjust val for BFD_RELOC_CRIS_LAPCQ_OFFSET.
2031 (md_pcrel_from): BFD_RELOC_CRIS_LAPCQ_OFFSET is PC-relative too.
2032 (s_syntax) <struct syntaxes>: Properly constify member operand.
2033 * config/tc-cris.h (TARGET_MACH): Define.
2034 (cris_mach): Declare.
2035 * doc/as.texinfo (Overview) <CRIS>: Add --march=...
2036 * doc/c-cris.texi (CRIS-Symbols): New node for built-in symbols.
2037 (CRIS-Opts): Document --march=...
2038 (CRIS-Pseudos): Document .arch.
2040 2004-11-04 Jan Beulich <jbeulich@novell.com>
2042 * config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
2043 intel syntax and no register prefix, allow $ in symbol names when
2044 intel syntax.
2045 (set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
2046 (intel_float_operand): Add fourth return value indicating math control
2047 operations. Make classification more precise.
2048 (md_assemble): Complain if memory operand of mov[sz]x has no size
2049 specified.
2050 (parse_insn): Translate word operands to floating point instructions
2051 operating on integers as well as control instructions to short ones
2052 as expected by AT&T syntax. Translate 'd' suffix to short one only for
2053 floating point instructions operating on non-integer operands.
2054 (match_template): Remove fldcw special case. Adjust q-suffix handling
2055 to permit it on fild/fistp/fisttp in AT&T mode.
2056 (process_suffix): Don't guess DefaultSize insns' suffix from
2057 stackop_size for certain floating point control instructions. Guess
2058 suffix for branch and [ls][gi]dt based on flag_code. Split error
2059 messages for Intel and AT&T syntax, and make the condition more strict
2060 for the former. Adjust suppressing of generation of operand size
2061 overrides.
2062 (intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
2063 OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
2064 more error checking.
2065 * config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
2066 SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
2068 2004-11-03 Hans-Peter Nilsson <hp@axis.com>
2070 * symbols.c (colon) [!WORKING_DOT_WORD]: Don't declare
2071 md_short_jump_size, md_long_jump_size.
2072 * write.c [!WORKING_DOT_WORD]: Ditto.
2073 * tc.h [!WORKING_DOT_WORD]: Declare them here. Drop const
2074 qualifier.
2075 * config/tc-cris.h (md_short_jump_size, md_long_jump_size): Don't
2076 declare.
2077 * config/tc-cris.c (md_short_jump_size, md_long_jump_size): Drop
2078 const qualifier in these definitions.
2079 * config/tc-i370.c, config/tc-m68k.c, config/tc-pdp11.c,
2080 config/tc-s390.c, config/tc-tahoe.c, config/tc-vax.c: Ditto.
2082 2004-11-02 Nick Clifton <nickc@redhat.com>
2084 * dwarf2dbg.c (dwarf2_finish): Check for the existence of a file
2085 table before deciding to produce a .debug_line section to match up
2086 with a user provided .debug_info section.
2088 2004-10-28 Tomer Levi <Tomer.Levi@nsc.com>
2090 * config/tc-crx.c (getreg_image): Bug fix, a return value was
2091 mistakenly omitted from CRX_C_REGTYPE and CRX_CS_REGTYPE cases.
2093 2004-10-27 Tomer Levi <Tomer.Levi@nsc.com>
2095 * config/tc-crx.c: Remove global variable 'post_inc_mode'.
2096 (get_flags): New function.
2097 (get_number_of_bits): Edit comments, update numeric values to
2098 supported sizes.
2099 (process_label_constant): Don't support the colon
2100 format (SYMBOL:[s|m|l]).
2101 (set_cons_rparams): Support argument type 'arg_rbase'.
2102 (get_operandtype): Bug fix in 'rbase' operand type parsing.
2103 (handle_LoadStor): Bug fix, first handle post-increment mode.
2104 (getreg_image): Remove redundant code, update according to latest
2105 CRX spec.
2106 (print_constant): Bug fix relate to 3-word instructions.
2107 (assemble_insn): Bug fix, when matching instructions, verify also
2108 instruction type (not only mnemonic).
2109 Add various error checking.
2110 (preprocess_reglist): Support HI/LO and user registers.
2112 2004-10-25 David Mosberger-Tang <davidm@hpl.hp.com>
2114 * config/tc-ia64.c (fixup_unw_records): Don't let the "t" value
2115 in an epilogue directive go negative.
2117 2004-10-25 H.J. Lu <hongjiu.lu@intel.com>
2119 PR 474
2120 * config/tc-ia64.c (emit_one_bundle): Decrement md.num_slots_in_use
2121 after reporting template error during manual bundling. Reported
2122 by Michael Dupont, michaelx.dupont@intel.com.
2124 2004-10-25 Daniel Jacobowitz <dan@debian.org>
2126 * Makefile.am: Run dep-am.
2127 * aclocal.m4: Regenerate with automake 1.9.2.
2128 * Makefile.in: Regenerate with automake 1.9.2.
2129 * doc/Makefile.in: Likewise.
2131 * config/tc-arm.c: Include "dw2gencfi.h".
2132 (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
2133 New functions.
2134 * config/tc-arm.h (TARGET_USE_CFIPOP, DWARF2_DEFAULT_RETURN_COLUMN)
2135 (DWARF2_CIE_DATA_ALIGNMENT, tc_regname_to_dw2regnum)
2136 (tc_cfi_frame_initial_instructions): Define.
2137 (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
2138 Add prototypes.
2140 2004-10-21 Tomer Levi <Tomer.Levi@nsc.com>
2142 * config/tc-crx.c (assemble_insn): Check unsigned immediate
2143 operands validity.
2144 Update coprocessor id to be unsigned immediate.
2146 2004-10-18 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
2148 * config/tc-i386.c (O_secrel): Delete.
2149 (tc_pe_dwarf2_emit_offset): New function.
2150 * config/tc-i386.h (O_secrel): Define as O_md1.
2151 (TC_DWARF2_EMIT_OFFSET): Define.
2153 2004-10-18 Nick Clifton <nickc@redhat.com>
2155 * config/tc-xstormy16.c (xstormy16_cons_fix_new): Accept and
2156 ignore @fptr() directives for 4-byte fixups.
2158 2004-10-15 Alan Modra <amodra@bigpond.net.au>
2160 * Makefile.am: Run "make dep-am"
2161 * Makefile.in: Regenerate.
2163 2004-10-14 Bob Wilson <bob.wilson@acm.org>
2165 * doc/c-xtensa.texi (Xtensa Options, Absolute Literals Directive):
2166 Remove comments about placement of literal pools.
2167 (Literal Directive): Update description of literal placement.
2168 (Literal Prefix Directive): Remove statement that this does not apply
2169 to absolute-mode literals. Describe new section naming scheme.
2171 2004-10-12 Bob Wilson <bob.wilson@acm.org>
2173 * config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq.
2174 (is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode,
2175 is_windowed_return_opcode): Delete.
2176 (xtensa_frob_label): Use get_subseg_target_freq.
2177 (md_assemble): Inline call to is_entry_opcode.
2178 (xtensa_handle_align): Inline call to get_frag_is_literal.
2179 (relaxation_requirements): Inline call to is_jx_opcode.
2180 (emit_single_op): Inline call to is_movi_opcode.
2181 (xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn,
2182 get_frag_is_no_transform, is_entry_opcode, and
2183 set_frag_is_specific_opcode. Use get_subseg_total_freq.
2184 (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags,
2185 xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed):
2186 Inline calls to get_frag_is_no_transform.
2187 (next_instrs_are_b_retw): Inline call to is_windowed_return_opcode.
2188 (xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and
2189 get_frag_is_no_transform.
2190 (convert_frag_immed_finish_loop): Inline calls to get_expression_value
2191 and set_frag_is_no_transform.
2192 (get_expression_value): Delete.
2193 (subseg_map struct): Rename cur_total_freq to total_freq. Rename
2194 cur_target_freq to target_freq.
2195 (get_subseg_info): Split out code to create a new map entry into ...
2196 (add_subseg_info): ... this new function.
2197 (get_last_insn_flags): Check if get_subseg_info succeeded.
2198 (set_last_insn_flags): Call add_subseg_info if needed.
2199 (get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New.
2200 (xtensa_reorder_segments): Compute last_sec while counting sections.
2201 Remove call to get_last_sec.
2202 (get_last_sec): Delete.
2203 (cache_literal_section): Inline call to retrieve_literal_seg and its
2204 callees, seg_present and add_seg_list.
2205 (retrieve_literal_seg, seg_present, add_seg_list): Delete.
2206 (get_frag_is_insn, get_frag_is_no_transform,
2207 set_frag_is_specific_opcode, set_frag_is_no_transform): Delete.
2208 * config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15.
2210 2004-10-12 Bob Wilson <bob.wilson@acm.org>
2212 * config/tc-xtensa.c: Use ISO C90 formatting.
2213 * config/tc-xtensa.h: Likewise.
2214 * config/xtensa-istack.h: Likewise.
2215 * config/xtensa-relax.c: Likewise.
2216 * config/xtensa-relax.h: Likewise.
2218 2004-10-12 Paul Brook <paul@codesourcery.com>
2220 * config/tc-arm.c (md_begin): Change EF_ARM_EABI_VER3 to
2221 EF_ARM_EABI_VER4.
2222 (arm_eabis): Ditto.
2223 * doc/c-arm.texi: Document that we actually support -meabi=4, not
2224 -meabi=3.
2226 2004-10-08 Bob Wilson <bob.wilson@acm.org>
2228 * doc/as.texinfo (VTableEntry, VTableInherit): Add "directive" to index
2229 entries.
2230 (Acknowledgements): Use "GAS" instead of AS variable.
2232 2004-10-08 Daniel Jacobowitz <dan@debian.org>
2234 * config/tc-i386.c: Include "elf/x86-64.h".
2235 (i386_elf_section_type): New function.
2236 * config/tc-i386.h (md_elf_section_type): Define.
2237 (i386_elf_section_type): New prototype.
2239 2004-10-08 Linus Nielsen Feltzing <linus@haxx.se>
2241 * config/m68k-parse.h (enum m68k_register): New control register,
2242 MBAR2 (for MCF5249)
2243 * config/tc-m68k.c: Correct control register set for MCF5249.
2245 2004-10-07 Bob Wilson <bob.wilson@acm.org>
2246 Sterling Augustine <sterling@tensilica.com>
2248 * config/tc-xtensa.c (absolute_literals_supported): New global flag.
2249 (UNREACHABLE_MAX_WIDTH): Define.
2250 (XTENSA_FETCH_WIDTH): Delete.
2251 (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
2252 prefer_const16, prefer_l32r): New global variables.
2253 (LIT4_SECTION_NAME): Define.
2254 (lit4_state struct): Add lit4_seg_name and lit4_seg fields.
2255 (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
2256 (frag_flags struct): New.
2257 (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field.
2258 (subseg_map struct): Add cur_total_freq and cur_target_freq fields.
2259 (bitfield, bit_is_set, set_bit, clear_bit): Define.
2260 (MAX_FORMATS): Define.
2261 (op_placement_info struct, op_placement_table): New.
2262 (O_pltrel, O_hi16, O_lo16): Define.
2263 (directiveE enum): Rename directive_generics to directive_transform.
2264 Delete directive_relax. Add directive_schedule,
2265 directive_absolute_literals, and directive_last_directive.
2266 (directive_info): Rename "generics" to "transform". Delete "relax".
2267 Add "schedule" and "absolute-literals".
2268 (directive_state): Adjust entries to match changes in directive_info.
2269 (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
2270 (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
2271 xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
2272 (xtensa_j_opcode, xtensa_rsr_opcode): Delete.
2273 (align_only_targets, software_a0_b_retw_interlock,
2274 software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
2275 software_avoid_short_loop, software_avoid_close_loop_end,
2276 software_avoid_all_short_loops, specific_opcode): Delete.
2277 (warn_unaligned_branch_targets): New.
2278 (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
2279 workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
2280 (option_[no_]link_relax, option_[no_]transform,
2281 option_[no_]absolute_literals, option_warn_unaligned_targets,
2282 option_prefer_l32r, option_prefer_const16, option_target_hardware):
2283 New enum values.
2284 (option_[no_]align_only_targets, option_literal_section_name,
2285 option_text_section_name, option_data_section_name,
2286 option_bss_section_name, option_eb, option_el): Delete.
2287 (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
2288 warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
2289 and target-hardware. Delete entries for [no-]target-align-only,
2290 literal-section-name, text-section-name, data-section-name, and
2291 bss-section-name.
2292 (md_parse_option): Handle new options and remove old ones. Accept but
2293 ignore [no-]density options. Warn for [no-]generics and [no-]relax
2294 and treat them as [no-]transform.
2295 (md_show_usage): Add new options and remove old ones.
2296 (xtensa_setup_hw_workarounds): New.
2297 (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add
2298 "long", "short", "loc" and "frequency" entries.
2299 (use_generics): Rename to ...
2300 (use_transform): ... this function. Add past_xtensa_end check.
2301 (use_longcalls): Add past_xtensa_end check.
2302 (code_density_available, can_relax): Delete.
2303 (do_align_targets): New.
2304 (get_directive): Accept dashes in directive names. Warn about
2305 [no-]generics and [no-]relax directives and treat them as
2306 [no-]transform.
2307 (xtensa_begin_directive): Call md_flush_pending_output only for some
2308 directives. Check for directives inside instruction bundles. Warn
2309 about deprecated ".begin literal" usage. Warn and ignore [no-]density
2310 directives. Handle new directives. Check generating_literals flag
2311 for literal_prefix.
2312 (xtensa_end_directive): Check for directives inside instruction
2313 bundles. Warn and ignore [no-]density directives. Handle new
2314 directives. Call xtensa_set_frag_assembly_state.
2315 (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
2316 xtensa_dwarf2_emit_insn): New.
2317 (xtensa_literal_position): Call md_flush_pending_output. Do not check
2318 use_literal_section flag.
2319 (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute
2320 literals. Use xtensa_elf_cons to parse the expression.
2321 (xtensa_literal_prefix): Do not check use_literal_section. Support
2322 ".lit4" sections for absolute literals. Change prefix convention to
2323 replace ".text" (or ".t" in a linkonce section). No need to call
2324 subseg_set.
2325 (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
2326 (expression_end): Handle closing braces and colons.
2327 (PLT_SUFFIX, plt_suffix): Delete.
2328 (expression_maybe_register): Use new xtensa-isa.h functions. Use
2329 xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
2330 and O_hi16 expressions as well.
2331 (tokenize_arguments): Handle closing braces and colons.
2332 (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible"
2333 operands and paired register syntax.
2334 (get_invisible_operands): New.
2335 (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use
2336 new xtensa-isa.h functions.
2337 (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
2338 (xg_translate_idioms): Check if inside bundle. Use use_transform.
2339 Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density
2340 instructions. Use xtensa_translate_zero_immed.
2341 (operand_is_immed, operand_is_pcrel_label): Delete.
2342 (get_relaxable_immed): Use new xtensa-isa.h functions.
2343 (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h
2344 functions.
2345 (xtensa_print_insn_table, print_vliw_insn): New.
2346 (is_direct_call_opcode): Use new xtensa-isa.h functions.
2347 (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
2348 is_branch_or_jump_opcode): Delete.
2349 (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
2350 (opnum_to_reloc, reloc_to_opnum): Delete.
2351 (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
2352 xtensa-isa.h functions. Operate on one slot of an instruction.
2353 (xtensa_insnbuf_set_immediate_field, is_negatable_branch,
2354 xg_get_insn_size): Delete.
2355 (xg_get_build_instr_size): Use xg_get_single_size.
2356 (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
2357 xg_build_widen_table. Use xg_get_single_size.
2358 (xg_get_max_narrow_insn_size): Delete.
2359 (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
2360 xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use
2361 xg_get_single_size.
2362 (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and
2363 OP_OPERAND_LOW16U. Check xg_valid_literal_expression.
2364 (xg_expand_to_stack, xg_expand_narrow): Update calls to
2365 xg_build_widen_table. Use xg_get_single_size.
2366 (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to
2367 xg_check_operand.
2368 (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and
2369 treat weak symbols conservatively.
2370 (xg_check_operand): Use new xtensa-isa.h functions.
2371 (is_dnrange): Delete.
2372 (xg_assembly_relax): Inline previous calls to tinsn_copy.
2373 (xg_finish_frag): Specify separate relax states for the frag and slot0.
2374 (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
2375 xtensa-isa.h functions.
2376 (xg_instruction_matches_option_term, xg_instruction_matches_or_options,
2377 xg_instruction_matches_options): New.
2378 (xg_instruction_matches_rule): Handle O_register expressions. Call
2379 xg_instruction_matches_options.
2380 (transition_rule_cmp): New.
2381 (xg_instruction_match): Update call to xg_build_simplify_table.
2382 (xg_build_token_insn): Record loc fields.
2383 (xg_simplify_insn): Check is_specific_opcode field and
2384 density_supported flag.
2385 (xg_expand_assembly_insn): Skip checking code_density_available. Use
2386 new xtensa-isa.h functions. Call use_transform instead of can_relax.
2387 (xg_assemble_literal): Add error handling for O_big. Call
2388 record_alignment. Handle O_pltrel.
2389 (xg_valid_literal_expression): New.
2390 (xg_assemble_literal_space): Add slot parameter. Remove call to
2391 set_expr_symbol_offset. Add call to record_alignment. Update call to
2392 xg_finish_frag.
2393 (xg_emit_insn): Delete.
2394 (xg_emit_insn_to_buf): Add format parameter. Update calls to
2395 xg_add_opcode_fix and xtensa_insnbuf_to_chars.
2396 (xg_add_opcode_fix): Change opcode parameter to tinsn and add format
2397 and slot parameters. Handle new "alternate" relocations for absolute
2398 literals and CONST16 instructions. Check for bad uses of O_lo16 and
2399 O_hi16. Use new xtensa-isa.h functions.
2400 (xg_assemble_tokens): Delete.
2401 (is_register_writer): Use new xtensa-isa.h functions.
2402 (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
2403 old-style RSR from LCOUNT.
2404 (next_frag_opcode): Delete.
2405 (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
2406 update_next_frag_state): New.
2407 (update_next_frag_nop_state): Delete.
2408 (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
2409 (xtensa_mark_literal_pool_location): Check use_literal_section flag and
2410 the state of the absolute-literals directive. Add calls to
2411 record_alignment and xtensa_set_frag_assembly_state. Call
2412 xtensa_switch_to_non_abs_literal_fragment instead of
2413 xtensa_switch_to_literal_fragment.
2414 (build_nop): New.
2415 (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars.
2416 (get_expanded_loop_offset): Change check for undefined opcode to an
2417 assertion.
2418 (xtensa_set_frag_assembly_state, relaxable_section,
2419 xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
2420 xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
2421 (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1.
2422 Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes.
2423 Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
2424 (xtensa_init_fix_data): New.
2425 (xtensa_frob_label): Reset label symbol to the current frag. Check
2426 do_align_targets and generating_literals flag. Propagate frequency
2427 info to new alignment frag. Call xtensa_set_frag_assembly_state.
2428 (xtensa_unrecognized_line): New.
2429 (xtensa_flush_pending_output): Check if inside a bundle. Add a call
2430 to xtensa_set_frag_assembly_state.
2431 (error_reset_cur_vinsn): New.
2432 (md_assemble): Remove check for literal frag. Remove call to
2433 istack_init. Call use_transform instead of use_generics. Parse
2434 explicit instruction format specifiers. Move code for
2435 a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call
2436 error_reset_cur_vinsn on errors. Add call to get_invisible_operands.
2437 Add dwarf2_where call. Remote automatic alignment for ENTRY
2438 instructions. Move call to xtensa_clear_insn_labels to the end.
2439 Rearrange to handle bundles.
2440 (xtensa_cons_fix_new): Delete.
2441 (xtensa_handle_align): New.
2442 (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove
2443 assignment to is_no_density field.
2444 (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc
2445 instead of reloc_to_opnum. Handle "alternate" relocations.
2446 (xtensa_force_relocation, xtensa_check_inside_bundle,
2447 xtensa_elf_section_change_hook): New.
2448 (xtensa_symbol_new_hook): Delete.
2449 (xtensa_fix_adjustable): Check for difference of symbols with an
2450 offset. Check for external and weak symbols.
2451 (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
2452 (md_estimate_size_before_relax): Return expansion for the first slot.
2453 (tc_gen_reloc): Handle difference of symbols by producing
2454 XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
2455 into the output. Handle new XTENSA_SLOT*_OP relocs by storing the
2456 tentative values into the output when linkrelax is set.
2457 (XTENSA_PROP_SEC_NAME): Define.
2458 (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
2459 Create literal tables only if using literal sections. Create new
2460 property tables instead of old instruction tables. Check for unaligned
2461 branch targets and loops.
2462 (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
2463 new_resource_table, clear_resource_table, resize_resource_table,
2464 resources_available, reserve_resources, release_resources,
2465 opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
2466 resources_conflict, xg_find_narrowest_format, relaxation_requirements,
2467 bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
2468 (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end
2469 flag. Update checks for workaround options. Call
2470 xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
2471 (xtensa_cleanup_align_frags): Add special case for branch targets.
2472 Check for and mark unreachable frags.
2473 (xtensa_fix_target_frags): Remove use of align_only_targets flag.
2474 Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
2475 end of a zero-overhead loop body.
2476 (frag_can_negate_branch): Handle instructions with multiple slots.
2477 Use new xtensa-isa.h functions
2478 (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
2479 xtensa_mark_zcl_first_insns): New.
2480 (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
2481 transformations are disabled.
2482 (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle
2483 multislot instructions.
2484 (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
2485 Likewise. Also error if transformations are disabled.
2486 (unrelaxed_frag_max_size): New.
2487 (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
2488 xtensa-isa.h functions.
2489 (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
2490 xtensa_opcode_is_loop instead of is_loop_opcode.
2491 (get_text_align_power): Replace as_fatal with assertion.
2492 (get_text_align_fill_size): Iterate instead of using modulus when
2493 use_nops is false.
2494 (get_noop_aligned_address): Assert that this is for a machine-dependent
2495 RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop,
2496 xg_get_single_size, and frag_format_size.
2497 (get_widen_aligned_address): Rename to ...
2498 (get_aligned_diff): ... this function. Add max_diff parameter.
2499 Remove handling of rs_align/rs_align_code frags. Use
2500 next_frag_format_size, get_text_align_power, get_text_align_fill_size,
2501 next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff
2502 and pass it back to caller.
2503 (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new
2504 RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
2505 RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen.
2506 (relax_frag_text_align): Rename to ...
2507 (relax_frag_loop_align): ... this function. Assume loops can only be
2508 in the first slot of an instruction.
2509 (relax_frag_add_nop): Use assemble_nop instead of constructing an OR
2510 instruction. Remove call to frag_wane.
2511 (relax_frag_narrow): Rename to ...
2512 (relax_frag_for_align): ... this function. Extend to handle
2513 RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
2514 RELAX_NARROW for the first slot.
2515 (find_address_of_next_align_frag, bytes_to_stretch): New.
2516 (future_alignment_required): Use find_address_of_next_align_frag and
2517 bytes_to_stretch. Look ahead to subsequent frags to make smarter
2518 alignment decisions.
2519 (relax_frag_immed): Add format, slot, and estimate_only parameters.
2520 Check if transformations are enabled for b_j_loop_end workaround.
2521 Use new xtensa-isa.h functions and handle multislot instructions.
2522 Update call to xg_assembly_relax.
2523 (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
2524 RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
2525 frag types.
2526 (convert_frag_narrow): Add segP, format and slot parameters. Call
2527 convert_frag_immed for branch instructions. Adjust calls to
2528 tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use
2529 xg_get_single_size and xg_get_single_format.
2530 (convert_frag_fill_nop): New.
2531 (convert_frag_immed): Add format and slot parameters. Handle multislot
2532 instructions and use new xtensa-isa.h functions. Update calls to
2533 tinsn_immed_from_frag and xg_assembly_relax. Check if transformations
2534 enabled for b_j_loop_end workaround. Use build_nop instead of
2535 assemble_nop. Check is_specific_opcode flag. Check for unreachable
2536 frags. Use xg_get_single_size. Handle O_pltrel.
2537 (fix_new_exp_in_seg): Remove check for old plt flag.
2538 (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
2539 xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check
2540 for loop opcode to an assertion. Mark all frags up to the end of the
2541 loop as not transformable.
2542 (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
2543 (get_subseg_info): New.
2544 (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null
2545 check for dest_seg.
2546 (xtensa_switch_to_literal_fragment): Rewrite to handle absolute
2547 literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
2548 (xtensa_switch_to_non_abs_literal_fragment): New.
2549 (cache_literal_section): Add is_code parameter and pass it through to
2550 retrieve_literal_seg.
2551 (retrieve_literal_seg): Add is_code parameter and use it to set the
2552 flags on the literal section. Handle case where head parameter is 0.
2553 (get_frag_is_no_transform, set_frag_is_specific_opcode,
2554 set_frag_is_no_transform): New.
2555 (xtensa_create_property_segments): Add end_property_function parameter
2556 and pass it through to add_xt_block_frags. Call bfd_get_section_flags
2557 and skip SEC_DEBUGGING and !SEC_ALLOC sections.
2558 (xtensa_create_xproperty_segments, section_has_xproperty): New.
2559 (add_xt_block_frags): Add end_property_function parameter and call it
2560 if it is non-zero. Call xtensa_frag_flags_init.
2561 (xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
2562 get_frag_property_flags, frag_flags_to_number,
2563 xtensa_frag_flags_combinable, xt_block_aligned_size,
2564 xtensa_xt_block_combine, add_xt_prop_frags,
2565 init_op_placement_info_table, opcode_fits_format_slot,
2566 xg_get_single_size, xg_get_single_format): New.
2567 (istack_push): Inline call to tinsn_copy.
2568 (tinsn_copy): Delete.
2569 (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
2570 CONST16 opcodes. Handle O_big, O_illegal, and O_absent.
2571 (tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
2572 (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
2573 functions. Handle invisible operands.
2574 (tinsn_to_slotbuf): New.
2575 (tinsn_check_arguments): Use new xtensa-isa.h functions.
2576 (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn,
2577 vinsn_from_chars, and xg_free_vinsn.
2578 (tinsn_from_insnbuf): New.
2579 (tinsn_immed_from_frag): Add slot parameter and handle multislot
2580 instructions. Handle symbol differences.
2581 (get_num_stack_text_bytes): Use xg_get_single_size.
2582 (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
2583 xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
2584 get_expr_register, set_expr_symbol_offset_diff): New.
2585 * config/tc-xtensa.h (MAX_SLOTS): Define.
2586 (xtensa_relax_statesE): Move from tc-xtensa.c. Add
2587 RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
2588 RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
2589 RELAX_NONE types.
2590 (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
2591 (xtensa_frag_type struct): Add is_assembly_state_set,
2592 use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
2593 is_align, is_text_align, alignment, and is_first_loop_insn fields.
2594 Replace is_generics and is_relax fields by is_no_transform field.
2595 Delete is_text and is_longcalls fields. Change text_expansion and
2596 literal_expansion to arrays of MAX_SLOTS entries. Add arrays of
2597 per-slot information: literal_frags, slot_subtypes, slot_symbols,
2598 slot_sub_symbols, and slot_offsets. Add fr_prev field.
2599 (xtensa_fix_data struct): New.
2600 (xtensa_symfield_type struct): Delete plt field.
2601 (xtensa_block_info struct): Move definition to tc-xtensa.h. Add
2602 forward declaration here.
2603 (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec.
2604 (XTENSA_SECTION_RENAME): Undefine.
2605 (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
2606 tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
2607 HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
2608 (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
2609 (unit_num_copies_func, opcode_num_units_func,
2610 opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
2611 (resource_table struct): New.
2612 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
2613 (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
2614 literal_space, symbol, sub_symbol, offset, and literal_frag fields.
2615 (tinsn_copy): Delete prototype.
2616 (vliw_insn struct): New.
2617 * config/xtensa-relax.c (insn_pattern_struct): Add options field.
2618 (widen_spec_list): Add option conditions for density and boolean
2619 instructions. Add expansions using CONST16 and conditions for using
2620 CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for
2621 predicted branches.
2622 (simplify_spec_list): Add option conditions for density instructions.
2623 Add entry for NOP instruction.
2624 (append_transition): Add cmp function pointer parameter and use it to
2625 insert the new entry in order.
2626 (operand_function_LOW16U, operand_function_HI16U): New.
2627 (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
2628 OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
2629 (enter_opname, split_string): Use xstrdup instead of strdup.
2630 (init_insn_pattern): Initialize new options field.
2631 (clear_req_or_option_list, clear_req_option_list,
2632 clone_req_or_option_list, clone_req_option_list, parse_option_cond):
2633 New.
2634 (parse_insn_pattern): Parse option conditions.
2635 (transition_applies): New.
2636 (build_transition): Use new xtensa-isa.h functions. Fix incorrectly
2637 swapped last arguments in calls to append_constant_value_condition.
2638 Call clone_req_option_list. Add warning about invalid opcode.
2639 Handle LOW16U and HI16U function names.
2640 (build_transition_table): Add cmp parameter and use it in calls to
2641 append_transition. Use new xtensa-isa.h functions. Check
2642 transition_applies before adding entries.
2643 (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
2644 pass it through to build_transition_table.
2645 * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
2646 ReqOption, transition_cmp_fn): New types.
2647 (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
2648 (transition_rule struct): Add options field.
2649 * doc/as.texinfo (Overview): Update Xtensa options.
2650 * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
2651 --[no-]relax, and --[no-]generics options. Update descriptions of
2652 --text-section-literals and --[no-]longcalls. Add
2653 --[no-]absolute-literals and --[no-]transform.
2654 (Xtensa Syntax): Add description of syntax for FLIX instructions.
2655 Remove use of "generic" and "specific" terminology for opcodes.
2656 (Xtensa Registers): Generalize the syntax description to include
2657 user-defined register files.
2658 (Xtensa Automatic Alignment): Update.
2659 (Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
2660 (Xtensa Call Relaxation): Linker can now remove most of the overhead.
2661 (Xtensa Directives): Remove confusing rules about precedence.
2662 (Density Directive, Relax Directive): Delete.
2663 (Schedule Directive): New.
2664 (Generics Directive): Rename to ...
2665 (Transform Directive): ... this node.
2666 (Literal Directive): Update for absolute literals. Missing
2667 literal_position directive is now an error.
2668 (Literal Position Directive): Update for absolute literals.
2669 (Freeregs Directive): Delete.
2670 (Absolute Literals Directive): New.
2671 (Frame Directive): Minor editing.
2672 * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
2673 Update dependencies.
2674 * Makefile.in: Regenerate.
2676 2004-10-07 Richard Sandiford <rsandifo@redhat.com>
2678 * config/tc-mips.c (append_insn): Use fix_new rather than fix_new_exp
2679 to build the second and third fixups for a composite relocation.
2680 (macro_read_relocs): New function.
2681 (macro_build): Use it.
2682 (s_cpsetup): Pass all three composite relocation codes to macro_build.
2683 Simplify fragging code accordingly.
2684 (s_gpdword): Use fix_new rather than fix_new_exp for the second part
2685 of the composite relocation. Set fx_tcbit in both fixups.
2687 2004-10-07 Richard Sandiford <rsandifo@redhat.com>
2689 * config/tc-mips.c (append_insn): Set fx_tcbit for composite relocs.
2690 (md_apply_fix3): Don't treat composite relocs as done.
2692 2004-10-07 Jan Beulich <jbeulich@novell.com>
2694 * macro.c (macro_expand_body): When ELF, use .LL rather than LL as
2695 prefix for symbol names generated from the LOCAL macro directive.
2697 * dw2gencfi.c (select_cie_for_fde): When separating CIE out from
2698 FDE, treat a DW_CFA_remember_state as we do a DW_CFA_advance_loc.
2700 2004-10-07 Tomer Levi <Tomer.Levi@nsc.com>
2702 * config/tc-crx.c (preprocess_reglist): Handle Co-processor
2703 Special registers.
2704 (md_assemble): Add error checking for Co-Processor instructions.
2705 (get_cinv_parameters): Add 'b' option to invalidate the
2706 branch-target cache.
2708 2004-10-05 Paul Brook <paul@codesourcery.com>
2710 * config/tc-arm.c (unwind): New variable.
2711 (vfp_sp_encode_reg): New function.
2712 (vfp_sp_reg_required_here): Use it.
2713 (vfp_sp_reg_list, vfp_dp_reg_list): Remove.
2714 (vfp_parse_reg_list): New function.
2715 (s_arm_unwind_fnstart, s_arm_unwind_fnend, s_arm_unwind_cantunwind,
2716 s_arm_unwind_personality, s_arm_unwind_personalityindex,
2717 s_arm_unwind_handlerdata, s_arm_unwind_save, s_arm_unwind_movsp,
2718 s_arm_unwind_pad, s_arm_unwind_setfp, s_arm_unwind_raw): New
2719 functions.
2720 (md_pseudo_table): Add them.
2721 (do_vfp_reg2_from_sp2): Use vfp_parse_reg_list and vfp_sp_encode_reg.
2722 (do_vfp_sp2_from_reg2, vfp_sp_ldstm, vfp_dp_ldstm): Ditto.
2723 (set_section, add_unwind_adjustsp, flush_pending_unwind,
2724 finish_unwind_opcodes, start_unwind_section, create_unwind_entry,
2725 require_hashconst, add_unwind_opcode): New functions.
2726 * doc/c-arm.texi: Document unwinding opcodes.
2727 * NEWS: Mention the new feature.
2729 2004-10-04 Eric Christopher <echristo@redhat.com>
2731 * config/tc-mips.c (md_apply_fix3): Remove erroneous assert.
2733 2004-10-01 H.J. Lu <hongjiu.lu@intel.com>
2735 * config/tc-ppc.c (md_apply_fix3): Call S_SET_THREAD_LOCAL for
2736 TLS relocations.
2737 * config/tc-s390.c (md_apply_fix3): Likewise.
2738 * config/tc-sparc.c (md_apply_fix3): Likewise.
2740 2004-10-01 Paul Brook <paul@codesourcery.com>
2742 * config/tc-arm.c (arm_elf_section_type): New function.
2743 (arm_elf_change_section): Set section link for exidx sections.
2744 * config/tc-arm.h (arm_elf_section_type): Add prototype.
2745 (md_elf_section_type): Define.
2747 2004-10-01 Bill Farmer <Bill@the-farmers.freeserve.co.uk>
2749 * config/tc-pdp11.c (md_apply_fix3): Change to sign of the SOB
2750 instruction's offset.
2752 2004-10-01 Adam Nemet <anemet@lnxw.com>
2754 * (TARGET_FORMAT): Remove LynxOS COFF definition.
2756 2004-10-01 Ravi Ramaseshan <ravi.ramaseshan@codito.com>
2758 * config/tc-arc.c (tc_gen_reloc): Don't assume fixP->fx_addsy is an
2759 asymbol *, instead use symbol_get_bfdsym.
2761 2004-09-30 Linus Nielsen Feltzing <linus@haxx.se>
2763 * config/tc-m68k.c (select_control_regs): Add mcf5249.
2765 2004-09-30 Paul Brook <paul@codesourcery.com>
2767 * config/tc-arm.c (do_smi, do_nop): New functions.
2768 (insns): Add ARMv6ZK instructions.
2769 (md_apply_fix3): Handle BFD_RELOC_ARM_SMI.
2770 (tc_gen_reloc): Ditto.
2771 (arm_cpus): Add mpcore and arm1176.
2772 (arm_archs): Add armv6{k,z,zk}.
2773 * doc/c-arm.texi: Document new cores and architectures.
2775 2004-09-30 Nick Clifton <nickc@redhat.com>
2777 * config/tc-arm.c: Use ISO C90 formatting.
2779 2004-09-30 Vladimir Ivanov <vladitx@nucleusys.com>
2781 * config/tc-arm.c (mav_reg_required_here): Allow REG_TYPE_CN
2782 as alternative when REG_TYPE_MVF, REG_TYPE_MVD, REG_TYPE_MVFX or
2783 REG_TYPE_MVDX is expected.
2785 2004-09-29 Marc Bevand <m.bevand@gmail.com>
2787 * doc/c-i386.texi (i386-Mnemonics): Fix typo.
2789 2004-09-21 James E Wilson <wilson@specifixinc.com>
2791 * config/tc-ia64.c (ENCODED_PSP_OFFSET): New.
2792 (output_rp_psprel, output_pfs_psprel, output_preds_psprel,
2793 output_spill_base, output_unat_psprel, output_lc_psprel,
2794 output_fpsr_psprel, output_priunat_psprel, output_bsp_psprel,
2795 output_bsprestore_psprel, output_rnat_psprel, output_spill_psprel,
2796 output_spill_psprel_p): Use it.
2798 2004-09-20 Tomer Levi <Tomer.Levi@nsc.com>
2800 * config/tc-crx.c (handle_LoadStor): New function.
2801 Handle load/stor unique instructions before parsing.
2803 2004-09-17 Paul Brook <paul@codesourcery.com>
2805 * config/tc-arm.c (s_arm_rel31): New funciton.
2806 (md_pseudo_table): Add .rel31.
2807 (md_apply_fix3): Handle BFD_RELOC_ARM_TARGET2,
2808 BFD_RELOC_32_PCREL and BFD_RELOC_ARM_PREL31.
2809 (tc_gen_reloc): Handle BFD_RELOC_ARM_PREL31 and BFD_RELOC_ARM_TARGET2.
2810 (arm_fix_adjustable): Return 0 for BFD_RELOC_ARM_TARGET2.
2811 (arm_parse_reloc): Add (target2).
2813 2004-09-17 Alan Modra <amodra@bigpond.net.au>
2815 * Makefile.am: Run "make dep-am".
2816 * Makefile.in: Regenerate.
2817 * aclocal.m4: Regenerate.
2818 * configure: Regenerate.
2819 * doc/Makefile.in: Regenerate.
2820 * po/POTFILES.in: Regenerate.
2821 * po/gas.pot: Regenerate.
2823 2004-09-14 Hideki IWAMOTO <h-iwamoto@kit.hi-ho.ne.jp>
2825 * config/tc-mmix.c [!LLONG_MIN]: Correct #elsif to #elif.
2826 [!LLONG_MAX]: Ditto.
2828 2004-09-13 Paul Brook <paul@codesourcery.com>
2830 * config/tc-arm.c: Rename RELABS to TARGET1.
2832 2004-09-13 Alan Modra <amodra@bigpond.net.au>
2834 * messages.c (as_internal_value_out_of_range): Cast values passed
2835 to as_bad_where or as_warn_where to proper type.
2837 2004-09-11 Theodore A. Roth <troth@openavr.org>
2839 * config/tc-avr.c: Add support for
2840 atmega48, atmega88, atmega168, attiny13, attiny2313, at90can128.
2842 2004-09-09 Alan Modra <amodra@bigpond.net.au>
2844 * dw2gencfi.c (select_cie_for_fde): When separating CIE out
2845 from FDE, treat a CFI_escape as we do a DW_CFA_advance_loc.
2847 2004-09-08 Paul Brook <paul@codesourcery.com>
2849 * config/obj-elf.c (obj_elf_section_type): Handle init_array,
2850 fini_array and preinit_array section types.
2851 * config/tc-ia64.c (ia64_elf_section_type): Remove init_array
2852 and fini_array.
2853 * doc/as.texinfo: Document extra section types.
2855 2004-09-02 Mark Mitchell <mark@codesourcery.com>
2857 * Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
2858 * Makefile.in: Regenerated.
2859 * configure.in: Set em for arm*-*-symbianelf*.
2860 * configure: Regenerated.
2861 * config/tc-arm.c (elf32_arm_target_format): Use Symbian target
2862 vectors when appropriate.
2863 * config/te-symbian.h: New file.
2865 2004-09-03 Tomer Levi <Tomer.Levi@nsc.com>
2867 * config/tc-crx.c (gettrap): Exception vector can be case
2868 insensitive.
2869 (process_label_constant): Fix a 32-bit displacement bug in branch
2870 instructions.
2871 (get_operandtype) : Bug fix, wrong operand was used.
2872 (process_label_constant): Initialize relocation type to
2873 BFD_RELOC_NONE
2875 2004-09-01 Richard Earnshaw < reanrsha@arm.com>
2877 * tc-arm.c (arm_cpus, arm_fpus): Allow <cpu>-s as well as <cpu>s
2878 for synthesizable cores.
2880 * doc/c-arm.texi (ARM Options): Document canonical names of CPUs.
2882 2004-08-25 Dmitry Diky <diwil@spec.ru>
2884 * config/tc-msp430.c: Clean-up the code.
2885 (md_relax_table): New relax table.
2886 (mcu_types): Sort MCU types.
2887 (md_pseudo_table): Add .profiler pseudo handler.
2888 (pow2value): New function.
2889 (msp430_profiler): New function.
2890 (msp430_operands): Add new insns handlers.
2891 (msp430_srcoperand): Add register operand handler, allow complex
2892 expressions.
2893 (md_estimate_size_before_relax): Rewritten.
2894 (md_convert_frag): Rewritten.
2895 (msp430_relax_frag): New function.
2896 * config/tc-msp430.h (md_relax_frag): define macro
2897 * doc/c-msp430.texi: Update information.
2899 2004-08-24 Nick Clifton <nickc@redhat.com>
2901 * as.c (std_shortopts): Allow -g to take an optional argument.
2902 (parse_args): Pass any switch starting with -g on to the backend
2903 for parsing.
2905 2004-08-18 Mark Mitchell <mark@codesourcery.com>
2907 * configure.in (arm*-*-symbianelf*): New target.
2908 (arm*-*-eabi*): Likewise.
2909 * configure: Regenerated.
2911 2004-08-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
2912 * config/tc-mips.c (append_insn): Handle delay slots in branch likely
2913 correctly.
2915 2004-08-18 Jakub Jelinek <jakub@redhat.com>
2917 * config/tc-ia64.c (start_unwind_section): Add linkonce_empty
2918 argument, don't do anything if current section is not
2919 .gnu.linkonce.t.* and linkonce_empty is set.
2920 (generate_unwind_image, dot_endp): Adjust callers, call
2921 start_unwind_section (*, 1) if nothing will be put into the
2922 section.
2924 2004-08-17 Nick Clifton <nickc@redhat.com>
2926 * as.c (MD_DEBUG_FORMAT_SELECTOR): Provide default definition.
2927 (show_usage): Add -g.
2928 (std_longopts): Add --gen-debug. Alpha sort the table.
2929 (parse_args): Print an error message if a switch is not handled.
2930 Handle the -g switch, calling md_debug_format_selector() if
2931 necessary.
2932 * NEWS: Mention new feature.
2933 * doc/as.texinfo: Document new switch.
2934 * doc/internals.texi: Document behaviour of md_parse_option.
2936 * config/tc-arm.c (md_parse_option): Do not issue an error message
2937 if the switch is not recognised.
2938 * config/tc-m68k.c (md_parse_option): Likewise.
2939 * config/tc-pdp11.c (md_parse_option): Likewise.
2940 * config/tc-v850.c (md_parse_option): Likewise.
2942 * as.h: Fix up formatting.
2943 * tc.h: Likewise.
2945 2004-08-16 Nick Clifton <nickc@redhat.com>
2947 * macro.c (macro_set_alternate): Use ISO C90 formatting.
2949 * configure.in: Sort architecture based tables alphabetically.
2950 * configure: Regenerate.
2952 2004-08-16 Alan Modra <amodra@bigpond.net.au>
2954 * config/tc-ppc.c (tc_ppc_regname_to_dw2regnum <regnames>): Replace
2955 { "cc", 68 }, with { "cr", 70 }.
2957 2004-08-13 Jan Beulich <jbeulich@novell.com>
2958 Nick Clifton <nickc@redhat.com>
2960 * as.c: Add and handle new --alternate command line option.
2961 * macro.c (macro_set_alternate): New.
2962 * macro.h (macro_set_alternate): Declare.
2963 * read.c: Add and handle new .altmacro and .noaltmacro directives.
2964 * doc/as.texinfo: Document new command line option and pseudo-ops
2965 as well as insert documentation originating from gasp about
2966 alternate macro syntax.
2967 * NEWS: Mention new command line option and pseudo-ops.
2969 2004-08-10 Mark Mitchell <mark@codesourcery.com>
2971 * expr.c (operand): Handle the "~", "-", and "!" operators applied
2972 to bignums.
2974 2004-08-06 Paul Brook <paul@codesourcery.com>
2976 * config/tc-arm.c (md_apply_fix3, tc_gen_reloc, arm_parse_reloc):
2977 Handle new relocations.
2978 * include/elf/arm.h (elf_arm_reloc_type): Add new EABI relocations.
2980 2004-08-05 Bob Wilson <bob.wilson@acm.org>
2982 * write.c (relax_segment): Use was_address instead of address when
2983 setting fr_fix field for align frag due to backwards .org.
2985 2004-07-29 Alexandre Oliva <aoliva@redhat.com>
2987 Introduce SH2a support.
2988 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
2989 * config/tc-sh.c (get_specific): Change arch_sh2a_up to
2990 arch_sh2a_nofpu_up.
2991 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
2992 * config/tc-sh.c (md_parse_option): Add sh2a-nofpu ISA handling.
2993 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
2994 * config/tc-sh.c (sh_elf_final_processing): Move sh2a recognition
2995 to end of conditional expression.
2996 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
2997 * config/tc-sh.c: Add sh2a-nofpu support.
2998 2003-12-29 DJ Delorie <dj@redhat.com>
2999 * tc-sh.c: Add sh2a support.
3000 (parse_reg): Add tbr.
3001 (parse_at): Support @@(disp,tbr).
3002 (get_specific): Support sh2a opcodes.
3003 (insert4): New, for 4 byte relocs.
3004 (build_Mytes): Support sh2a opcodes.
3005 (md_apply_fix3_Mytes): Support sh2a opcodes.
3006 2003-12-02 Michael Snyder <msnyder@redhat.com>
3007 * config/tc-sh.c (md_parse_option): Handle sh2a.
3008 (sh_elf_final_processing): Ditto.
3010 2004-07-27 Jason Thorpe <thorpej@wasabisystems.com>
3012 * config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
3013 for TE_NetBSD.
3015 2004-07-27 Alan Modra <amodra@bigpond.net.au>
3017 * config/tc-ppc.c (ppc_frob_file_before_adjust): Warn if .toc too big.
3018 (ppc_arch): Expand comment.
3020 2004-07-27 Tomer Levi <Tomer.Levi@nsc.com>
3022 * config/tc-crx.c: Support evaluating the difference between two
3023 symbols.
3024 * config/tc-crx.h: Likewise.
3026 2004-07-26 H.J. Lu <hongjiu.lu@intel.com>
3028 * config/tc-ia64.c (start_unwind_section): Set the linked-to
3029 section.
3030 (ia64_elf_section_change_hook): Set the linked-to section for
3031 SHT_IA_64_UNWIND.
3033 2004-07-26 Dmitry Diky <diwil@spec.ru>
3035 * config/tc-msp430.c: Add new subtargets: msp430x1610,
3036 msp430x1611, msp430x1612, msp430x415, msp430x417, msp430xG437,
3037 msp430xG438, msp430xG439.
3039 2004-07-25 Daniel Jacobowitz <dan@debian.org>
3041 * doc/as.texinfo (Section, PushSection): Correct documentation
3042 for ELF.
3044 2004-07-21 Jan Beulich <jbeulich@novell.com>
3046 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
3047 permissible for the selected instruction suffix.
3048 (match_template): Don't permit 64-bit general purpose operands in
3049 32-bit mode.
3050 (finalize_imm): Permit 64-bit immediates.
3051 (build_modrm_byte): Don't treat 32-bit addressing in 64-bit mode
3052 specially except for the width of the used base and/or index
3053 registers. For 32-bit displacements, use sign-extended
3054 relocations only when using 64-bit addressing.
3055 Force zero displacement on rip-relative addressing when there is
3056 no other displacement.
3057 (i386_index_check): Don't treat 32-bit addressing in 64-bit mode
3058 specially except for the width of the used base and/or index
3059 registers.
3060 (parse_register): Disallow Reg64 registers in 32-bit mode.
3062 * config/tc-i386.c: For DefaultSize instructions, don't guess a 'q'
3063 suffix if the instruction doesn't support it.
3065 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org>
3067 * config/tc-mips.c (append_insn): Handle constant expressions with
3068 no associated relocation.
3069 (mips_ip): Cancel the expression after use for the Q format
3070 specifier.
3071 (parse_relocation): Return no relocation for unsupported
3072 operators.
3073 (my_getSmallExpression): Return no relocation if no relocation
3074 operators are used.
3076 2004-07-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3078 * config/obj-som.c (adjust_stab_sections): Add prototype.
3079 (obj_som_compiler, obj_som_version, obj_som_copyright,
3080 adjust_stab_sections): Add ATTRIBUTE_UNUSED to unused arguments.
3081 * config/tc-hppa.c (update_subspace): Likewise.
3082 (is_defined_subspace): Amplify comment.
3083 * config/obj-som.h (som_frob_file): Add prototype.
3085 2004-07-19 Christopher Faylor <cgf@timesys.com>
3086 H.J. Lu <hongjiu.lu@intel.com>
3088 * subsegs.c (section_symbol): Don't create a new segment when
3089 existing segment is undefined.
3091 2004-07-16 Richard Earnshaw <rearnsha@arm.com>
3093 * config/tc-arm.c: Include include/opcode/arm.h.
3094 (ARM_EXT_*, ARM_ARCH_*, ARM_ANY, ARM_ALL, COPROC_ANY): Delete.
3095 (FPU_FPA_EXT_* FPU_VFP_EXT_*, FPU_ANY, FPU_NONE, FPU_MAVERICK): Delete.
3096 (FPU_ARCH_*): Delete.
3097 * Makefile.am: Update dependencies.
3098 * Makefile.in: Regenerate.
3100 2004-07-15 Nick Clifton <nickc@redhat.com>
3102 * configure.in: Accept armbe as a big-endian arm configuration.
3103 * configure: Regenerate.
3105 2004-07-13 Thomas Nystrom <thn@saeab.se>
3107 * config/tc-i386.c (T_SHIFTOP): New constant.
3108 (intel_e05_1): Handle '&', '|' and T_SHIFTOP.
3109 (intel_el1): Handle '~'.
3110 (intel_get_token): Handle '<>', '&', '|' and '~'.
3112 2004-07-13 Nick Clifton <nickc@redhat.com>
3114 (md_assemble): Remove spurious newline from end of as_bad error
3115 message.
3116 (intel_e05_1): Likewise.
3117 (intel_e11): Likewise.
3118 (intel_match_token): Likewise.
3120 2004-07-11 Andreas Schwab <schwab@suse.de>
3122 * config/tc-m68k.c: Convert to C90. Remove redundant
3123 declarations. Indentation fixup.
3124 [M68KCOFF]: Include "obj-coff.h" instead of declaring
3125 obj_coff_section ourselves.
3127 2004-07-09 James E Wilson <wilson@specifixinc.com>
3129 * config/tc-ia64.c (default_big_endian): New.
3130 (dot_byteorder, md_begin): Use it.
3131 (md_parse_option): Set it.
3133 2004-07-09 Nick Clifton <nickc@redhat.com>
3135 * configure.in: Change sh-sybmian-elf to sh-*-symbianelf.
3136 * configure: Regenerate.
3137 * NEWS: Change sh-sybmian-elf to sh-*-symbianelf.
3138 * config/tc-sh.c (sh_elf_final_processing): Use renamed version of
3139 sh_find_elf_flags if necessary.
3141 2004-07-08 Richard Sandiford <rsandifo@redhat.com>
3143 * config/tc-mips.c (mips_fix_adjustable): If the full addend is
3144 going to be split into more than one in-place addend, return 0
3145 for relocations against mergeable sections. Associate comments
3146 with code.
3148 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com>
3150 * Makefile.am (CPU_TYPES): Add crx.
3151 (TARGET_CPU_CFILES): Add config/tc-crx.c.
3152 (TARGET_CPU_HFILES): Add config/tc-crx.h.
3153 (DEPTC_crx_elf): New target.
3154 (DEPOBJ_crx_elf): Likewise.
3155 (DEP_crx_elf): Likewise.
3156 * Makefile.in: Regenerate.
3157 * configure.in: Add crx* target.
3158 * configure: Regenerate.
3159 * config/tc-crx.c: New file.
3160 * config/tc-crx.h: New file.
3161 * NEWS: Mention new target.
3163 2004-07-06 Nick Clifton <nickc@redhat.com>
3165 * config.in: Undefine TARGET_SYMBIAN by default.
3166 * configure.in:
3167 * configure: Regenerate. Add sh-symbian-elf target. If
3168 selected define TARGET_SYMBIAN.
3169 * config/tc-sh.h (TARGET_FORMAT): Select a Symbian target
3170 format if TARGET_SYMBIAN has been defined.
3172 * output-file.c (output_file_create): Report the target format
3173 chosen when bfd_openw reports that it is invalid.
3175 * config/obj-coff.c (coff_pseudo_table): Only define the weak
3176 pseudo for BFD based assemblers.
3178 2004-07-05 Andrew Stubbs <andrew.stubbs@superh.com>
3180 gas:
3181 * config/tc-sh.c (md_assemble): Change isspace to ISSPACE.
3182 (md_parse_option): Remove redundant -isa testing.
3183 Make bfd_arch variable const.
3184 (md_show_usage): Make bfd_arch variable const.
3186 2004-07-03 James E Wilson <wilson@specifixinc.com>
3188 * config/tc-ia64.c (emit_one_bundle): Check and set insn_addr.
3189 * config/tc-ia64.h (md_frag_check): Define.
3191 2004-07-03 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
3193 * config/obj-coff.c (obj_coff_weak): New .weak syntax for PE weak
3194 externals.
3195 * doc/as.texinfo (Weak): Document PE weak symbols.
3197 2004-07-03 Richard Sandiford <rsandifo@redhat.com>
3199 * config/tc-mips.c (HAVE_IN_PLACE_ADDENDS): New macro.
3200 (reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
3201 (mips_frob_file): Rework so that only a single pass through the
3202 relocs is needed. Allow %lo()s to have higher offsets than their
3203 corresponding %hi()s or %got()s.
3205 2004-07-02 Nick Clifton <nickc@redhat.com>
3207 * config/tc-arm.c (md_apply_fix3:BFD_RELOC_ARM_IMMEDIATE): Do not
3208 allow values which have come from undefined symbols.
3209 Always consider this fixup to have been processed as a reloc
3210 cannot be generated for it.
3212 2004-07-02 Alan Modra <amodra@bigpond.net.au>
3214 * frags.h (struct frag): Add has_code and insn_addr fields.
3215 * write.c (cvt_frag_to_fill): Invoke md_frag_check.
3216 * config/tc-ppc.c (md_assemble): Check and set insn_addr.
3217 * config/tc-ppc.h (md_frag_check): Define.
3219 2004-06-28 Maciej W. Rozycki <macro@linux-mips.org>
3221 * doc/Makefile.am (info): Rename goal to...
3222 (info-local): ... this, to preserve implicit dependencies.
3223 * doc/Makefile.in: Regenerate with automake 1.8.5.
3225 2004-06-25 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
3227 * config/tc-m32r.c (md_convert_frag): Changed for @PLT.
3228 (m32r_cgen_record_fixup_exp): Changed for @GOTOFF, @GOT.
3229 (m32r_fix_adjustable): Changed for @GOTOFF, @GOT, @PLT.
3230 (tc_gen_reloc): Likewise.
3231 (m32r_end_of_match): Add for @GOTOFF, @GOT, @PLT.
3232 (m32r_parse_name): Likewise.
3233 (m32r_cgen_parse_fix_exp): Likewise.
3234 * config/tc-m32r.h (md_parse_name): Define for @GOTOFF, @GOT, @PLT.
3235 (O_PIC_reloc): Likewise.
3236 (TC_CGEN_PARSE_FIX_EXP): Likewise..
3237 * cgen.c (gas_cgen_parse_operand): Add TC_CGEN_PARSE_FIX_EXP
3238 for @GOTOFF, @GOT, @PLT.
3240 2004-06-21 Jan Beulich <jbeulich@novell.com>
3242 * gas/symbols.c: While discarding ordinary local absolute symbols
3243 when --strip-local-absolute is in effect, retain file symbols.
3245 2004-06-20 Andreas Schwab <schwab@suse.de>
3247 * config/tc-m68k.c (mri_chip): Replace current_chip, not augment.
3248 (md_parse_option): Likewise.
3250 2004-06-17 Jan Beulich <jbeulich@novell.com>
3252 * config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
3253 * config/te-netware.h: New file.
3254 * config/te-ppcnw.h: Delete: Obsolete.
3255 * configure.in: Eliminate ill NetWare targets. Make generic
3256 NetWare target use proper emulation.
3257 * Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
3258 reference to new te-netware.h.
3259 * configure: Regenerate.
3260 * Makefile.in: Regenerate.
3262 2004-06-15 Martin Schwidefsky <schwidefsky@de.ibm.com>
3264 * config/tc-s390.c (s390_insn): Avoid incorrect signed/unsigned
3265 comparison in .insn pseudo operation.
3267 2004-06-15 Alan Modra <amodra@bigpond.net.au>
3269 * config/obj-coff.c (coff_adjust_section_syms): Use
3270 bfd_get_section_size instead of bfd_get_section_size_before_reloc.
3271 (coff_frob_section): Likewise.
3272 * config/tc-mips.c (md_apply_fix3): Likewise.
3273 * config/obj-elf.c (elf_frob_file): Use bfd_set_section_size.
3274 (elf_frob_file_after_relocs): Likewise.
3276 2004-06-10 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3278 * config/tc-hppa.c (log2): Rename to exact_log2.
3279 (pa_next_subseg): Delete unused function.
3280 (create_new_space): Mark unused arguments with ATTRIBUTE_UNUSED.
3281 (create_new_subspace): Likewise.
3283 Bug gas/213
3284 * config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
3285 labels. Fix warning.
3287 2004-05-28 DJ Delorie <dj@redhat.com>
3289 * config/tc-mn10300.h (tc_fix_adjustable): Define.
3290 * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
3291 or non-merged symbols.
3293 2004-05-28 H.J. Lu <hongjiu.lu@intel.com>
3295 * config/tc-ia64.c (remove_marked_resource): Save, clear and
3296 restore the old slot when inserting srlz.i/srlz.d.
3298 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
3300 * Makefile.am: Regenerate dependecies.
3301 * Makefile.in: Regenerate.
3302 * config/tc-sh.c (valid_arch): Make unsigned.
3303 (preset_target_arch): Likewise.
3304 (md_begin): Use new architecture flags system.
3305 (get_specific): Likewise.
3306 (assemble_ppi): Likewise.
3307 (md_assemble): Likewise. Also fix error check for bad opcodes.
3308 (md_parse_option): Likewise. Also generate -isa values according
3309 to the table in bfd/cpu-sh.c instead of just constants. Also
3310 allow <arch>-up ISA variants.
3311 (sh_elf_final_processing): Replace if-else chain with a call to
3312 sh_find_elf_flags().
3313 * testsuite/gas/sh/arch: New directory.
3314 * testsuite/gas/sh/arch/arch.exp: New test script.
3315 * testsuite/gas/sh/arch/arch_expected.txt: New file.
3316 * testsuite/gas/sh/arch/sh.s: New file.
3317 * testsuite/gas/sh/arch/sh2.s: New file.
3318 * testsuite/gas/sh/arch/sh-dsp.s: New file.
3319 * testsuite/gas/sh/arch/sh2e.s: New file.
3320 * testsuite/gas/sh/arch/sh3-nommu.s: New file.
3321 * testsuite/gas/sh/arch/sh3.s: New file.
3322 * testsuite/gas/sh/arch/sh3-dsp.s: New file.
3323 * testsuite/gas/sh/arch/sh3e.s: New file.
3324 * testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
3325 * testsuite/gas/sh/arch/sh4-nofpu.s: New file.
3326 * testsuite/gas/sh/arch/sh4.s: New file.
3327 * testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
3328 * testsuite/gas/sh/arch/sh4al-dsp.s: New file.
3329 * testsuite/gas/sh/arch/sh4a.s: New file.
3331 2004-05-28 Peter Barada <peter@the-baradas.com>
3333 * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
3334 with zero offset into mode 2 addressing to save a word.
3336 2004-05-27 H.J. Lu <hongjiu.lu@intel.com>
3338 * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
3339 (ar_is_only_in_integer_unit): New.
3340 (ar_is_only_in_memory_unit): New.
3341 (generate_unwind_image): Silence gcc on 32bit host.
3342 (md_assemble): Use ar_is_only_in_integer_unit instead of
3343 ar_is_in_integer_unit. Check AR access.
3345 2004-05-27 Peter Barada <peter@the-baradas.com>
3347 * config/tc-m68k.c (md_begin): Sort the opcode table into
3348 alphabetical order.
3349 (m68k_compare_opcode): New function to do the sorting.
3351 2004-05-24 Peter Barada <peter@the-baradas.com>
3353 * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
3354 addressing on MIT style operands.
3355 * config/m68k-parse.y(yylex): Allow '-&' for predecrement
3356 w/mask addressing.
3357 * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
3358 operands.
3360 2004-05-23 Alan Modra <amodra@bigpond.net.au>
3362 * expr.c (operand, operator): Don't reject '++' and '--'.
3364 2004-05-20 Richard Sandiford <rsandifo@redhat.com>
3366 * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
3367 dwarf tables.
3369 2004-05-17 Adam Nemet <anemet@lnxw.com>
3371 * configure.in: Add ppc-*-lynxos*. Update i386-*-lynxos* to ELF.
3372 * configure: Regenerate.
3374 2004-05-13 Paul Brook <paul@codesourcery.com>
3376 * dw2gencfi.c (output_cie): Handle dwarf3 format CIE entries.
3378 2004-05-13 Joel Sherrill <joel@oarcorp.com>
3380 * configure.in (or32-*-rtems*): Switch to elf.
3381 * configure: Regenerate.
3383 2004-05-13 Nick Clifton <nickc@redhat.com>
3385 * po/fr.po: Updated French translation.
3387 2004-05-11 Nick Clifton <nickc@redhat.com>
3389 * doc/as.texinfo (Section): Document G and T flags to .section
3390 directive. Document the extra arguments that the G flag
3391 requires. Document the #tls flag.
3393 2004-05-11 H.J. Lu <hongjiu.lu@intel.com>
3395 * subsegs.c (section_symbol): Create a new section symbol if
3396 the existing one doesn't match.
3397 * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.
3399 2004-05-07 Richard Sandiford <rsandifo@redhat.com>
3401 * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
3402 to cope with VR4181A errata MD(1) and MD(4).
3404 2004-05-07 Brian Ford <ford@vss.fsi.com>
3406 * NEWS: Mention .secrel32 for pe[i]-i386.
3408 2004-05-07 Alexandre Oliva <aoliva@redhat.com>
3410 * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
3411 (HANDLE_ALIGN): New.
3413 2004-05-06 Daniel Jacobowitz <dan@debian.org>
3415 * Makefile.am (DIST_SUBDIRS): Define.
3416 * aclocal.m4: Regenerate with automake 1.8.4.
3417 * Makefile.in: Likewise.
3418 * doc/Makefile.in: Likewise.
3420 2004-05-06 David Mosberger-Tang <davidm@hpl.hp.com>
3422 * config/tc-ia64.c (dot_serialize): Declare.
3423 (dot_serialize): New function.
3424 (md_pseudo_table): Add ".serialize.data" and
3425 ".serialize.instruction" directives.
3427 2004-05-06 Nick Clifton <nickc@redhat.com>
3429 * messages (as_internal_value_out_of_range): Print a message about
3430 a value being out of range. Be consistent about whether the
3431 values are printed in decimal or hexadecimal.
3432 (as_warn_value_out_of_range): Generate a warning message about an
3433 out of range value.
3434 (as_bad_value_out_of_range): Generate an error message about an
3435 out of range value.
3436 * as.h: Prototype the new functions.
3437 * config/tc-alpha.c (insert_operand): Use new function.
3438 * config/tc-arc.c (arc_insert_operand): Likewise.
3439 * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
3440 * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
3441 * config/tc-ppc.c (ppc_insert_operand): Likewise.
3442 * config/tc-s390.c (s390_insert_operand): Likewise.
3443 * config/tc-v850.c (v850_insert_operand): Likewise.
3445 2004-05-05 Alexandre Oliva <aoliva@redhat.com>
3447 * configure.in: Set em=linux for frv-*-*linux*.
3448 * configure: Rebuilt.
3449 * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
3450 (frv_md_fdpic_enabled): New.
3451 * config/tc-frv.c (frv_md_fdpic_enabled): New.
3452 (DEFAULT_FDPIC): New.
3453 (frv_flags): Use DEFAULT_FDPIC.
3454 (frv_pic_flag): Likewise.
3455 (OPTION_NOPIC): New.
3456 (md_longopts): Add -mnopic.
3457 (md_parse_option): Handle it.
3458 (md_show_usage): Add -mfdpic and -mnopic.
3460 2004-05-05 Peter Barada <peter@the-baradas.com>
3462 * config/tc-m68k.c: Add find_cf_chip to print list of valid
3463 chips for invalid coldfire instructions, rename selectors
3464 for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
3465 add current_chip to track which chip is referred to(including save/restore),
3466 use current_chip to select control registers, not current_arch.
3467 (md_show_usage): Add new chips.
3468 * doc/c-m68k.texi: Document new command line switches.
3470 2004-05-05 Jakub Jelinek <jakub@redhat.com>
3472 * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
3473 (NOP_OPCODE): Define.
3474 (s390_align_code): Remove prototype.
3475 * tc-s390.c (s390_align_code): Remove.
3477 2004-05-04 H.J. Lu <hongjiu.lu@intel.com>
3479 * config/tc-ia64.c (make_unw_section_name): Removed.
3480 (start_unwind_section): New function.
3481 (generate_unwind_image): Take const segT instead of const
3482 char *.
3483 (dot_handlerdata): Adjusted.
3484 (dot_endp): Likewise.
3486 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
3488 * config/obj-elf.c (obj_elf_change_section): Allow the
3489 ".note.GNU-stack" section has SHF_EXECINSTR.
3491 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
3493 * config/obj-elf.c (get_section): Return bfd_boolean.
3494 (obj_elf_change_section): Call bfd_get_section_by_name_if
3495 instead of bfd_map_over_sections.
3497 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
3499 * config/obj-elf.c (get_section): New function.
3500 (obj_elf_change_section): Support multiple sections with same
3501 name.
3503 2004-04-30 Nick Clifton <nickc@redhat.com>
3505 * config/tc-arm.c (create_register_alias): Fix typo checking for
3506 case sensitive register aliases.
3507 (co_proc_number): Use error message string in all_reg_maps[]
3508 array.
3509 (cp_reg_required_here): Likewise.
3510 (fp_reg_required_here): Likewise.
3512 2004-04-29 Brian Ford <ford@vss.fsi.com>
3514 * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.
3516 2004-04-28 Chris Demetriou <cgd@broadcom.com>
3518 * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
3519 (load_address, macro, mips_ip, md_parse_option)
3520 (mips_force_relocation, mips_validate_fix, md_apply_fix3)
3521 (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
3522 embedded-PIC handling, and update comments.
3523 (SWITCH_TABLE): Remove.
3524 * config/tc-mips.h (DIFF_EXPR_OK): Delete.
3525 (enum mips_pic_level): Remove EMBEDDED_PIC.
3526 (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
3527 (TC_FORCE_RELOCATION): Update comment.
3528 * ecoff.c (ecoff_build_lineno): Add comment about some code that
3529 might be safe to remove now that MIPS embedded-PIC is gone.
3531 2004-04-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3533 * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
3534 call to obj_set_subsection_attributes.
3535 (obj_som_init_stab_section): Likewise.
3536 * config/tc-hppa.c (default_subspace_dict): Add comdat field.
3537 (pa_def_subspaces): Provide comdat default.
3538 (pa_subspace): Handle new "comdat" parameter. Set SEC_LINK_ONCE and
3539 not SEC_IS_COMMON if section is comdat, common or dup_common. Update
3540 calls to create_new_subspace and update_subspace to pass comdat flag.
3541 (create_new_subspace, update_subspace): Add new comdat argument. Use
3542 it in calls to obj_set_subsection_attributes.
3543 * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
3544 and use of comdat, common and dup_comm parameters.
3546 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
3548 * config/obj-elf.c (obj_elf_change_section): Check if the old
3549 group name is NULL before comparison.
3551 2004-04-23 Chris Demetriou <cgd@broadcom.com>
3553 * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.
3555 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3557 * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.
3559 2004-04-23 Chris Demetriou <cgd@broadcom.com>
3561 * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
3562 (OPTION_MEMBEDDED_PIC): Remove.
3563 (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
3564 (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
3565 (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
3566 (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
3567 (OPTION_ELF_BASE): Renumber.
3568 (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
3569 (md_show_usage): Remove mention of -membedded-pic.
3570 * doc/as.texinfo: Remove mention of -membedded-pic.
3572 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3574 * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
3575 * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
3576 a.out support.
3577 (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
3578 s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
3579 USE_GLOBAL_POINTER_OPT.
3581 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3583 * config/tc-mips.c (macro): One more use of load_delay_nop.
3585 2004-04-22 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
3587 * config/tc-mips.c (load_delay_nop): New function.
3588 (load_address, macro): Use load_delay_nop() to build a nop
3589 which can be omitted with gpr_interlocks.
3591 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3593 * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
3594 cop_interlocks): Remove superfluous CPU entries.
3596 2004-04-22 Paul Brook <paul@codesourcery.com>
3598 * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.
3600 2004-04-22 Peter Barada <peter@the-baradas.com>
3602 * NEWS: Added support for EMAC instructions and MAC/EMAC
3603 Motorola syntax.
3604 * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
3605 scale factor tokens, trailing_ampersand to mark mask addressing
3606 for MAC/EMAC instructions.
3607 * config/m68k-parse.y: Add options_ampersand clause, '<<',
3608 '>>'.
3609 (yylex): Handle '>', '<', and '&' following '+'.
3610 * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
3611 architectures in archs[].
3612 (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
3613 for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
3614 respectively.
3615 (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
3616 (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
3617 cases.
3618 Add EMAC operands to init_table[].
3620 2004-04-22 Bruno De Bus <bdebus@elis.ugent.be>
3622 * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
3623 state.
3624 (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
3625 * config/tc-arm.c (enum mstate): Delete from here.
3626 (mapping_state): Remove the static mapstate variable and instead
3627 store the state in the segment. This allows a per-section mapping
3628 state. Handle and ignore MAP_UNDEFINED states.
3629 (arm_elf_change_section): Get the current mapping state from the
3630 new section.
3631 (s_ltorg): Set the mapping state to MAP_DATA.
3632 (arm_cleanup): Use arm_elf_change_section to get the mapping state
3633 for each pool as it is emitted.
3635 2004-04-22 Nick Clifton <nickc@redhat.com>
3637 * config/tc-arm.h: Formatting tidy ups.
3639 2004-04-20 Chris Demetriou <cgd@broadcom.com>
3641 * NEWS: Note that MIPS -membedded-pic option is deprecated.
3643 2004-04-20 DJ Delorie <dj@redhat.com>
3645 * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
3646 * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
3647 [TE_PE] (O_secrel): Define.
3648 [TE_PE] (x86_pe_cons_fix_new): New.
3649 [TE_PE] (pe_directive_secrel): Likewise.
3650 (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.
3652 2004-04-19 Eric Christopher <echristo@redhat.com>
3654 * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
3655 of previous patch for fix in gcc.
3657 2004-04-19 Jakub Jelinek <jakub@redhat.com>
3659 * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.
3661 2004-04-19 Nathan Sidwell <nathan@codesourcery.com>
3663 * read.c (do_align): Call md_flush_pending_output, if defined.
3665 2004-04-16 Alan Modra <amodra@bigpond.net.au>
3667 * expr.c (operand): Correct checks for ++ and --.
3669 2004-04-14 H.J. Lu <hongjiu.lu@intel.com>
3671 * config/tc-generic.c: Add some comments.
3673 2004-04-14 Richard Sandiford <rsandifo@redhat.com>
3675 * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
3676 -{no-}mfix-vr4122-bugs.
3677 * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
3678 (append_insn, mips_emit_delays): Update accordingly.
3679 (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
3680 (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
3681 (md_parse_option): Update after above changes.
3682 (md_show_usage): Add -mfix-vr4120.
3684 2004-04-13 Bob Wilson <bob.wilson@acm.org>
3686 * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
3687 of .section directive; add a reference to the ELF .subsection
3688 directive.
3690 2004-04-13 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
3692 * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
3693 in parallel.
3695 2004-04-11 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3697 * Makefile.am: Remove mips from aout targets.
3698 * Makefile.in: Regenerate.
3699 * configure.in: Remove mips-dec-bsd* target.
3700 * configure: Regenerate.
3702 2004-04-07 Alan Modra <amodra@bigpond.net.au>
3704 PR 96
3705 * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
3706 to struct map_bfd. Adjust MAP macro, and define MAP32, MAP64.
3707 Update "mapping". Restrict some @ modifiers to 32 bit.
3709 2004-04-01 Asgari Jinia <asgarij@kpitcummins.com>
3710 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
3712 * config/tc-sh.c (dont_adjust_reloc_32): New variable.
3713 (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
3714 dont_adjust_reloc_32 is set.
3715 (md_longopts): Add option -renesas.
3716 (md_parse_option, md_show_usage): Likewise.
3717 * doc/c-sh.texi: Likewise.
3719 2004-04-01 Dave Korn <dk@artimi.com>
3721 * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
3722 hi16 and lo16 fixS structs.
3723 (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
3724 exactly the same way as for RELOC_DLX_REL16.
3725 (machine_ip): properly respect LO flag in the_insn and
3726 output RELOC_DLX_LO16 rather than RELOC_DLX_16.
3727 (md_apply_fix3): apply RELOC_DLX_LO16.
3729 2004-03-30 Stan Shebs <shebs@apple.com>
3731 Remove long-obsolete MPW support.
3732 * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
3733 * configure.in: Remove mention of ppc-*-mpw* config.
3734 * configure.in: Likewise.
3736 2004-03-30 Nick Clifton <nickc@redhat.com>
3738 * config/tc-arm.c (meabi_flags): Make its use conditional upon
3739 OBJ_ELF being defined.
3741 2004-03-27 Alan Modra <amodra@bigpond.net.au>
3743 * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
3745 2004-03-23 Paul Brook <paul@codesourcery.com>
3747 * config/tc-arm.c (meabi_flags): New variable.
3748 (arm_parse_eabi): New function.
3749 (md_begin): Set flags for EABI v3.
3750 (arm_eabis): Add.
3751 (arm_long_opts): Add meabi.
3752 * doc/as.texinfo <ARM>: Document -meabi.
3753 * doc/c-arm.texi: Ditto.
3755 2004-03-22 Bob Wilson <bob.wilson@acm.org>
3757 * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
3758 tables even when use_literal_section flag is not set.
3760 2004-03-22 Alan Modra <amodra@bigpond.net.au>
3762 * config/tc-sh.c: Remove trailing whitespace.
3764 2004-03-22 Hans-Peter Nilsson <hp@axis.com>
3766 * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
3767 --mul-bug-abort and the default behavior.
3768 * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
3769 (err_for_dangerous_mul_placement): New variable.
3770 (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
3771 macros.
3772 (md_cris_relax_table): Have placeholder for STATE_MUL.
3773 (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
3774 (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
3775 case doing nothing.
3776 (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
3777 STATE_BYTE)>: Ditto.
3778 (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
3779 alignment and position of this frag, emit error message if
3780 suspicious.
3781 (md_assemble): For a multiply insn and when checking it,
3782 transform the current frag into a special frag for that purpose.
3783 (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
3784 OPTION_MULBUG_ABORT_ON>: Handle new options.
3786 2004-03-19 Bob Wilson <bob.wilson@acm.org>
3788 * config/tc-xtensa.c (mark_literal_frags): New function.
3789 (xtensa_move_literals): Call mark_literal_frags for all literal
3790 segments, including init and fini literal segments.
3791 (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
3793 2004-03-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3795 * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
3796 (pa_comm): Set BSF_OBJECT in symbol flags.
3798 2004-03-19 Alan Modra <amodra@bigpond.net.au>
3800 * Makefile.am: Run "make dep-am".
3801 * Makefile.in: Regenerate.
3802 * doc/Makefile.in: Regenerate.
3803 * config.in: Regenerate.
3804 * po/gas.pot: Regenerate.
3806 2004-03-18 Nathan Sidwell <nathan@codesourcery.com>
3808 * read.c (read_a_source_file): Use demand_empty_rest_of_line.
3809 (demand_empty_rest_of_line): Issue an error here.
3810 (ignore_rest_of_line): Silently skip to end.
3811 (demand_copy_string): Issue an error, not warning.
3812 (equals): Likewise.
3813 * config/obj-elf.c (obj_elf_section_name): Likewise.
3814 (obj_elf_section): Likewise.
3815 * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
3816 (arc_extinst): Likewise.
3817 * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
3818 (dot_spill): Likewise.
3819 (dot_unwabi): Likewise.
3820 (dot_prologue): Likewise.
3822 * expr.c (operand): Reject ++ and --.
3823 (operator): Likewise.
3825 2004-03-17 Kaz Kojima <kkojima@rr.iij4u.or.jp>
3827 * config/tc-sh.c: Include dw2gencfi.h.
3828 (sh_cfi_frame_initial_instructions): New function.
3829 (sh_regname_to_dw2regnum): Likewise.
3830 * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
3831 file.
3832 (TARGET_USE_CFIPOP): Define.
3833 (tc_cfi_frame_initial_instructions): Likewise.
3834 (tc_regname_to_dw2regnum): Likewise.
3835 (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
3836 * Makefile.am: Update dependencies.
3837 * Makefile.in: Regenerate.
3839 2004-03-17 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
3841 * configure.in: Switch sh-*-rtems* to ELF. Add sh-*-rtemscoff*.
3842 * configure: Regenerate.
3844 2004-03-12 Bob Wilson <bob.wilson@acm.org>
3846 * read.c (s_leb128): Call md_flush_pending_output.
3848 2004-03-12 Michal Ludvig <mludvig@suse.cz>
3850 * config/tc-i386.c (output_insn): Handle PadLock instructions.
3851 * config/tc-i386.h (CpuPadLock): New define.
3852 (CpuUnknownFlags): Added CpuPadLock.
3854 2004-03-07 Andreas Schwab <schwab@suse.de>
3856 * doc/c-hppa.texi (HPPA Directives): Fix typo.
3858 2004-03-07 Richard Henderson <rth@redhat.com>
3860 * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
3861 (cfi_finish): Likewise for fde.
3863 2004-03-05 H.J. Lu <hongjiu.lu@intel.com>
3865 * config/tc-ia64.c (md_assemble): Properly handle NULL
3866 align_frag.
3867 (ia64_handle_align): Don't abort if failed to add a stop bit.
3869 2004-03-04 H.J. Lu <hongjiu.lu@intel.com>
3871 * Makefile.in: Regenerated.
3872 * aclocal.m4: Likewise.
3873 * configure: Likewise.
3874 * doc/Makefile.in: Likewise.
3876 2004-03-03 H.J. Lu <hongjiu.lu@intel.com>
3878 * config/tc-ia64.c (dot_align): New.
3879 (ia64_do_align): Make it static.
3880 (md_pseudo_table): Use "dot_align" for "align".
3881 (ia64_md_do_align): Don't set align_frag here.
3882 (ia64_handle_align): Add a stop bit to the previous bundle if
3883 needed.
3885 * config/tc-ia64.h (ia64_do_align): Removed.
3887 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com>
3889 * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
3890 -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
3891 (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
3892 the most general type or the user specifically requested it.
3893 (md_assemble): Add a new error message for when an instruction
3894 is understood, but is not allowed due to an -isa option.
3896 2004-03-02 H.J. Lu <hongjiu.lu@intel.com>
3898 * config/tc-ia64.c (align_frag): New.
3899 (md_assemble): Set the tc_frag_data field in align_frag for
3900 IA64_OPCODE_FIRST instructions.
3901 (ia64_md_do_align): Set align_frag.
3902 (ia64_handle_align): Add a stop bit if needed.
3904 * config/tc-ia64.h (TC_FRAG_TYPE): New.
3905 (TC_FRAG_INIT): New.
3907 2004-03-01 Richard Sandiford <rsandifo@redhat.com>
3909 * config/tc-frv.c (fr400_audio): New variable.
3910 (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
3911 (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
3912 (target_implements_insn_p): New function.
3913 (md_assemble): Report an error if the processor doesn't implement
3914 the instruction.
3916 2004-02-27 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
3918 * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
3919 (md_parse_option): Ditto.
3920 (OPTION_NO_SPECIAL_M32R): Added.
3921 (md_show_usage): Document it.
3922 (enable_speial_m32r): Changed a default value from 0 to 1.
3923 * doc/c-m32r.texi: Document the -no-bitinst option.
3925 2004-02-27 Nick Clifton <nickc@redhat.com>
3927 * config/tc-sh.c (get_operand): Revert previous delta.
3928 (tc_gen_reloc): Check for an unknown reloc type before processing
3929 the addend.
3931 2004-02-27 Hannes Reinecke <hare@suse.de>
3933 * config/tc-s390.c (s390_insn): Correct range check for opcode in
3934 .insn pseudo operation.
3936 2004-02-27 Anil Paranjpe <anilp1@kpitcummins.com>
3938 * config/tc-sh.c (get_operand): In case of #Imm, check has been
3939 added for wrong syntax.
3941 2004-02-26 Eric Christopher <echristo@redhat.com>
3943 * config/tc-mips.c (mips_dwarf2_addr_size): New.
3944 * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
3946 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com>
3948 * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
3949 nibble types to assembler.
3951 2004-02-25 Fred Fish <fnf@redhat.com>
3953 * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
3955 2004-02-20 James E Wilson <wilson@specifixinc.com>
3957 * config/tc-ia64.c (slot_index): New arg before_relax. Use instead of
3958 finalize_syms.
3959 (fixup_unw_records): New arg before_relax. Pass to slot_index.
3960 (ia64_estimate_size_before_relax): New.
3961 (ia64_convert_frag): Pass 0 to fixup_unw_records. Add comment.
3962 (generate_unwind_image): Pass 1 to fixup_unw_records.
3963 * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
3964 (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
3966 2004-02-19 Jakub Jelinek <jakub@redhat.com>
3968 * stabs.c (generate_asm_file): Avoid warning about use of
3969 uninitialized variable.
3971 2004-02-18 David Mosberger <davidm@hpl.hp.com>
3973 * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
3974 body, and endp, allow unwind records which do not have a "t"
3975 (time/instruction) field.
3977 2004-02-17 Petko Manolov <petkan@nucleusys.com>
3979 * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
3980 (do_mav_dspsc_2): Likewise.
3981 Fix accumulator registers move opcodes.
3983 2004-02-13 Hannes Reinecke <hare@suse.de>
3984 Jakub Jelinek <jakub@redhat.com>
3986 * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
3988 2004-02-10 Steve Ellcey <sje@cup.hp.com>
3990 * config/tc-ia64.h (ia64_frob_symbol): New declaration.
3991 (tc_frob_symbol): New macro definition.
3992 * config/tc-ia64.c (ia64_frob_symbol): New routine.
3994 2004-02-09 Daniel Jacobowitz <drow@mvista.com>
3996 * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
3997 read-only.
3999 2004-02-09 Nathan Sidwell <nathan@codesourcery.com>
4001 * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
4002 (TC_CASE_SENSITIVE): ... this.
4003 * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
4004 * doc/internals.texi (TC_CASE_SENSITIVE): Document.
4006 2004-02-06 James E Wilson <wilson@specifixinc.com>
4008 * config/tc-ia64.c (dot_endp): Delete call to output_endp.
4009 (generate_unwind_image): Re-add it here.
4011 2004-02-06 Nathan Sidwell <nathan@codesourcery.com>
4013 * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
4014 * read.h (SKIP_WHITESPACE): Turn into an expression.
4015 * read.c (read_a_source_file): A pseudo is removed by having a
4016 NULL handler.
4018 2004-02-05 James E Wilson <wilson@specifixinc.com>
4020 * config/tc-ia64.c (output_endp): New.
4021 (count_bits): Delete.
4022 (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
4023 endp unwind records.
4024 (fixup_unw_records): Handle endp unwind records. Delete code for
4025 shortening prologue regions not followed by a body record.
4026 (dot_endp): Call add_unwind_entry to emit endp unwind record.
4027 * config/tc-ia64.h (unw_record_type): Add endp.
4029 2004-02-03 James E Wilson <wilson@specifixinc.com>
4031 * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
4032 fill padding bytes with zeroes.
4033 (emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
4034 sets unwind_record slot_number and slot_frag fields.
4036 2004-02-02 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4038 * config/tc-mips.c (add_got_offset_hilo): New function.
4039 (macro): Use load_register() and add_got_offset_hilo() to load
4040 constants instead of hardcoding code sequences throughout.
4042 2004-01-28 H.J. Lu <hongjiu.lu@intel.com>
4044 * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
4046 2004-01-26 Bernardo Innocenti <bernie@develer.com>
4048 * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
4049 like m68k-elf.
4050 * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
4051 of hard-coded test for TARGET_OS=elf.
4053 2004-01-24 Chris Demetriou <cgd@broadcom.com>
4055 * config/tc-mips.c (hilo_interlocks): Change definition
4056 so that MIPS32, MIPS64 and later ISAs are included, along with
4057 the already-included machines. Update comments.
4059 2004-01-23 Daniel Jacobowitz <drow@mvista.com>
4061 * config/tc-arm.c (tc_gen_reloc): Improve error message for
4062 undefined local labels.
4064 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4066 * config/tc-mips.c (load_address, macro): Update comments about
4067 NewABI GP relaxation.
4069 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4071 * config/tc-mips.c (macro_build): Remove place and counter arguments.
4072 (mips_build_lui, macro_build_ldst_constoffset): Likewise.
4073 (mips16_macro_build, macro_build_jalr): Remove counter argument.
4074 (set_at, load_register, load_address, move_register): Likewise.
4075 (load_got_offset, add_got_offset): Likewise.
4076 Update all calls and tidy accordingly.
4078 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4080 * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
4081 (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
4082 (RELAX_USE_SECOND): Bump to 0x10000.
4083 (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
4084 (mips_macro_warning): New variable.
4085 (md_assemble): Wrap macro expansion in macro_start() and macro_end().
4086 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
4087 (relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
4088 of RELAX_ENCODE.
4089 (append_insn): Update mips_macro_warning.sizes.
4090 (macro_start, macro_warning, macro_end): New functions.
4091 (macro_build): Don't emit warnings here.
4092 (macro_build_lui, md_estimate_size_before_relax): ...or here.
4093 (md_convert_frag): Check for cases where one macro alternative
4094 needs a warning and the other doesn't. Emit a warning if the
4095 longer sequence was chosen.
4097 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4099 * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
4100 * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
4101 the first sequence, the size of the second sequence, and a flag
4102 that says whether we should warn.
4103 (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
4104 (RELAX_FIRST, RELAX_SECOND): New.
4105 (mips_relax): New variable.
4106 (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
4107 (append_insn): Remove "place" argument. Use mips_relax.sequence
4108 rather than "place" to check whether we're expanding the second
4109 alternative of a relaxable macro. Remove redundant check for
4110 branch relaxation. If generating a normal insn, and there
4111 is not enough room in the current frag, call relax_close_frag()
4112 to close it. Update mips_relax.sizes[]. Emit fixups for the
4113 second version of a relaxable macro. Record the first relaxable
4114 fixup in mips_relax. Remove tc_gen_reloc workaround.
4115 (macro_build): Remove all uses of "place". Use mips_relax.sequence
4116 in the same way as in append_insn.
4117 (mips16_macro_build): Remove "place" argument.
4118 (macro_build_lui): As for macro_build. Don't drop the add_symbol
4119 when generating the second version of a relaxable macro.
4120 (load_got_offset, add_got_offset): New functions.
4121 (load_address, macro): Use new relaxation machinery. Remove
4122 tc_gen_reloc workarounds.
4123 (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
4124 version of a relaxable macro is needed. Return -RELAX_SECOND if the
4125 first version is needed.
4126 (tc_gen_reloc): Remove relaxation handling.
4127 (md_convert_frag): Go through the fixups for a relaxable macro and
4128 mark those that belong to the unneeded alternative as done. If the
4129 second alternative is needed, adjust the fixup addresses to account
4130 for the deleted first alternative.
4132 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4134 * frags.h (frag_room): Declare.
4135 * frags.c (frag_room): New function.
4136 * doc/internals.texi: Document it.
4138 2004-01-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
4140 * config/tc-mips.c (append_insn): Don't do r3900 interlock
4141 optimization for -mtune=r3900, as this will break on other CPUs.
4143 2004-01-11 Tom Rix <tcrix@worldnet.att.net>
4145 * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
4146 be relaxed, use fixup.
4147 (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
4149 2004-01-19 Jakub Jelinek <jakub@redhat.com>
4151 * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
4152 precision operands.
4154 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4156 * config/tc-mips.c (append_insn): Properly detect variant frags
4157 that preclude swapping of relaxed branches. Correctly swap
4158 instructions between frags when dealing with relaxed branches.
4160 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4162 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
4163 throughout.
4164 * aclocal.m4: Regenerate.
4165 * configure: Regenerate.
4167 2004-01-12 Anil Paranjpe <anilp1@KPITCummins.com>
4169 * config/tc-h8300.c (build_bytes): Apply relaxation to bit
4170 manipulation insns.
4172 2004-01-12 Richard Sandiford <rsandifo@redhat.com>
4174 * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
4175 reloc, reserve space for the delay slot as well as the jalr itself.
4177 2004-01-09 Paul Brook <paul@codesourcery.com>
4179 * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
4180 (do_vfp_sp2_from_reg2): New function.
4181 (insns): Use them.
4182 (do_vfp_dp_from_reg2): Check return values properly.
4184 2004-01-08 Ian Lance Taylor <ian@wasabisystems.com>
4186 * config/tc-mips.c (warn_nops): Remove static variable.
4187 (macro): Remove test of warn_nops.
4188 (md_shortops): Remove 'n'.
4189 (md_parse_option): Remove 'n' case.
4190 (md_show_usage): Remove -n.
4191 * doc/as.texinfo (Overview): Remove MIPS -n option.
4192 * doc/c-mips.texi (MIPS Opts): Remove mention -n.
4193 * NEWS: Mention removal of MIPS -n option.
4195 * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
4196 (cop_interlocks): Check ISA level.
4197 (cop_mem_interlocks): Define.
4198 (reg_needs_delay): Check cop_interlocks rather than
4199 ISA_HAS_COPROC_DELAYS.
4200 (append_insn): Likewise. Use cop_mem_interlocks rather than
4201 directly checking mips_opts.isa.
4202 (mips_emit_delays): Likewise.
4204 2004-01-07 H.J. Lu <hongjiu.lu@intel.com>
4206 * config/tc-ia64.c (unwind): Move next_slot_number and
4207 next_slot_frag to ...
4208 (unw_rec_list): Here.
4209 (free_list_records): Removed.
4210 (output_unw_records): Likewise.
4211 (generate_unwind_image): Make it void.
4212 (alloc_record): Initialize next_slot_number and next_slot_frag.
4213 (slot_index): Take .org, .space and .align into account.
4214 (fixup_unw_records): Don't set slot_number to 0. Use
4215 list->next_slot_number and list->next_slot_frag instead of
4216 unwind.next_slot_number and unwind.next_slot_frag.
4217 (ia64_convert_frag): New.
4218 (generate_unwind_image): Generate a rs_machine_dependent frag
4219 for unwind record.
4220 (emit_one_bundle): Use list->next_slot_number and
4221 list->next_slot_frag instead of unwind.next_slot_number and
4222 unwind.next_slot_frag.
4224 * config/tc-ia64.h (md_convert_frag): Defined as
4225 ia64_convert_frag.
4226 (md_estimate_size_before_relax): Defined as (f)->fr_var.
4228 2004-01-06 Alexandre Oliva <aoliva@redhat.com>
4230 2003-12-19 Alexandre Oliva <aoliva@redhat.com>
4231 * config/tc-frv.h (md_apply_fix3): Don't define.
4232 * config/tc-frv.c (md_apply_fix3): New. Shift/truncate %hi/%lo
4233 operands.
4234 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
4235 2003-10-07 Alexandre Oliva <aoliva@redhat.com>
4236 * config/tc-frv.c (line_separator_chars): Add `!'.
4237 2003-09-19 Alexandre Oliva <aoliva@redhat.com>
4238 * config/tc-frv.c (md_assemble): Clear insn upfront.
4239 2003-09-18 Alexandre Oliva <aoliva@redhat.com>
4240 * config/tc-frv.c (OPTION_FDPIC): New macro.
4241 (md_longopts): Add mfdpic.
4242 (md_parse_option): Handle it.
4243 2003-08-04 Alexandre Oliva <aoliva@redhat.com>
4244 * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
4245 FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
4246 (frv_pic_ptr): Parse funcdesc.
4248 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4250 * doc/as.texinfo: Let texi2pod parse asconfig.texi and
4251 gasver.texi. Remove duplicate symbol definitions for texi2pod.
4253 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4255 * Makefile.am (Makefile): Move the dependency on
4256 $(BFDDIR)/configure.in to...
4257 (CONFIG_STATUS_DEPENDENCIES): ... here.
4258 (AUTOMAKE_OPTIONS): Require automake 1.8.
4259 * Makefile.in: Regenerate.
4260 * doc/Makefile.am (BASEDIR, BFDDIR): Define.
4261 (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
4262 $(BFDDIR)/configure.in here as well.
4263 * doc/Makefile.in: Regenerate.
4265 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4267 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
4268 * Makefile.in: Regenerate.
4269 * aclocal.m4: Regenerate.
4270 * doc/Makefile.am (install, install-info): Remove.
4271 (install-data-local): A new hook for install-info.
4272 (AUTOMAKE_OPTIONS): Require automake 1.8.
4273 * doc/Makefile.in: Regenerate.
4275 2004-01-02 Nutan Singh <nutan@kpitcummins.com>
4277 * doc/c-sh.texi: Update description about floating point behavior
4278 of SH family.
4280 2004-01-02 Bernardo Innocenti <bernie@develer.com>
4282 * configure.in: Add m68k-uClinux target.
4283 * configure: Regenerate.
4285 For older changes see ChangeLog-0203
4286 \f
4287 Local Variables:
4288 mode: change-log
4289 left-margin: 8
4290 fill-column: 74
4291 version-control: never
4292 End: