| blob | 454e9e0f2047035a4bd41a52dfc8f3ae04a6bd58 |
1 /* PowerPC-specific support for 32-bit ELF
2 Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
3 2004, 2005 Free Software Foundation, Inc.
4 Written by Ian Lance Taylor, Cygnus Support.
6 This file is part of BFD, the Binary File Descriptor library.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the
20 Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor,
21 Boston, MA 02110-1301, USA. */
23 /* This file is based on a preliminary PowerPC ELF ABI. The
24 information may not match the final PowerPC ELF ABI. It includes
25 suggestions from the in-progress Embedded PowerPC ABI, and that
26 information may also not match. */
37 /* RELA relocations are used here. */
39 static bfd_reloc_status_type ppc_elf_addr16_ha_reloc
41 static bfd_reloc_status_type ppc_elf_unhandled_reloc
44 /* Branch prediction bit for branch taken relocs. */
45 #define BRANCH_PREDICT_BIT 0x200000
46 /* Mask to set RA in memory instructions. */
47 #define RA_REGISTER_MASK 0x001f0000
48 /* Value to shift register by to insert RA. */
49 #define RA_REGISTER_SHIFT 16
51 /* The name of the dynamic interpreter. This is put in the .interp
52 section. */
55 /* For old-style PLT. */
56 /* The number of single-slot PLT entries (the rest use two slots). */
57 #define PLT_NUM_SINGLE_ENTRIES 8192
59 /* For new-style .glink and .plt. */
60 #define GLINK_PLTRESOLVE 16*4
61 #define GLINK_ENTRY_SIZE 4*4
63 /* VxWorks uses its own plt layout, filled in by the static linker. */
65 /* The standard VxWorks PLT entry. */
66 #define VXWORKS_PLT_ENTRY_SIZE 32
67 static const bfd_vma ppc_elf_vxworks_plt_entry
69 {
78 };
79 static const bfd_vma ppc_elf_vxworks_pic_plt_entry
81 {
90 };
92 /* The initial VxWorks PLT entry. */
93 #define VXWORKS_PLT_INITIAL_ENTRY_SIZE 32
94 static const bfd_vma ppc_elf_vxworks_plt0_entry
96 {
105 };
106 static const bfd_vma ppc_elf_vxworks_pic_plt0_entry
108 {
117 };
119 /* For executables, we have some additional relocations in
120 .rela.plt.unloaded, for the kernel loader. */
122 /* The number of non-JMP_SLOT relocations per PLT0 slot. */
123 #define VXWORKS_PLT_NON_JMP_SLOT_RELOCS 3
124 /* The number of relocations in the PLTResolve slot. */
125 #define VXWORKS_PLTRESOLVE_RELOCS 2
126 /* The number of relocations in the PLTResolve slot when when creating
127 a shared library. */
128 #define VXWORKS_PLTRESOLVE_RELOCS_SHLIB 0
130 /* Some instructions. */
131 #define ADDIS_11_11 0x3d6b0000
132 #define ADDIS_11_30 0x3d7e0000
133 #define ADDIS_12_12 0x3d8c0000
134 #define ADDI_11_11 0x396b0000
135 #define ADD_0_11_11 0x7c0b5a14
136 #define ADD_11_0_11 0x7d605a14
137 #define B 0x48000000
138 #define BCL_20_31 0x429f0005
139 #define BCTR 0x4e800420
140 #define LIS_11 0x3d600000
141 #define LIS_12 0x3d800000
142 #define LWZU_0_12 0x840c0000
143 #define LWZ_0_12 0x800c0000
144 #define LWZ_11_11 0x816b0000
145 #define LWZ_11_30 0x817e0000
146 #define LWZ_12_12 0x818c0000
147 #define MFLR_0 0x7c0802a6
148 #define MFLR_12 0x7d8802a6
149 #define MTCTR_0 0x7c0903a6
150 #define MTCTR_11 0x7d6903a6
151 #define MTLR_0 0x7c0803a6
152 #define NOP 0x60000000
153 #define SUB_11_11_12 0x7d6c5850
155 /* Offset of tp and dtp pointers from start of TLS block. */
156 #define TP_OFFSET 0x7000
157 #define DTP_OFFSET 0x8000
158 \f
162 /* This reloc does nothing. */
177 /* A standard 32 bit relocation. */
192 /* An absolute 26 bit branch; the lower two bits must be zero.
193 FIXME: we don't check that, we just clear them. */
208 /* A standard 16 bit relocation. */
223 /* A 16 bit relocation without overflow. */
238 /* The high order 16 bits of an address. */
253 /* The high order 16 bits of an address, plus 1 if the contents of
254 the low 16 bits, treated as a signed number, is negative. */
269 /* An absolute 16 bit branch; the lower two bits must be zero.
270 FIXME: we don't check that, we just clear them. */
285 /* An absolute 16 bit branch, for which bit 10 should be set to
286 indicate that the branch is expected to be taken. The lower two
287 bits must be zero. */
302 /* An absolute 16 bit branch, for which bit 10 should be set to
303 indicate that the branch is not expected to be taken. The lower
304 two bits must be zero. */
319 /* A relative 26 bit branch; the lower two bits must be zero. */
334 /* A relative 16 bit branch; the lower two bits must be zero. */
349 /* A relative 16 bit branch. Bit 10 should be set to indicate that
350 the branch is expected to be taken. The lower two bits must be
351 zero. */
366 /* A relative 16 bit branch. Bit 10 should be set to indicate that
367 the branch is not expected to be taken. The lower two bits must
368 be zero. */
383 /* Like R_PPC_ADDR16, but referring to the GOT table entry for the
384 symbol. */
399 /* Like R_PPC_ADDR16_LO, but referring to the GOT table entry for
400 the symbol. */
415 /* Like R_PPC_ADDR16_HI, but referring to the GOT table entry for
416 the symbol. */
431 /* Like R_PPC_ADDR16_HA, but referring to the GOT table entry for
432 the symbol. */
447 /* Like R_PPC_REL24, but referring to the procedure linkage table
448 entry for the symbol. */
463 /* This is used only by the dynamic linker. The symbol should exist
464 both in the object being run and in some shared library. The
465 dynamic linker copies the data addressed by the symbol from the
466 shared library into the object, because the object being
467 run has to have the data at some particular address. */
482 /* Like R_PPC_ADDR32, but used when setting global offset table
483 entries. */
498 /* Marks a procedure linkage table entry for a symbol. */
513 /* Used only by the dynamic linker. When the object is run, this
514 longword is set to the load address of the object, plus the
515 addend. */
530 /* Like R_PPC_REL24, but uses the value of the symbol within the
531 object rather than the final value. Normally used for
532 _GLOBAL_OFFSET_TABLE_. */
547 /* Like R_PPC_ADDR32, but may be unaligned. */
562 /* Like R_PPC_ADDR16, but may be unaligned. */
577 /* 32-bit PC relative */
592 /* 32-bit relocation to the symbol's procedure linkage table.
593 FIXME: not supported. */
608 /* 32-bit PC relative relocation to the symbol's procedure linkage table.
609 FIXME: not supported. */
624 /* Like R_PPC_ADDR16_LO, but referring to the PLT table entry for
625 the symbol. */
640 /* Like R_PPC_ADDR16_HI, but referring to the PLT table entry for
641 the symbol. */
656 /* Like R_PPC_ADDR16_HA, but referring to the PLT table entry for
657 the symbol. */
672 /* A sign-extended 16 bit value relative to _SDA_BASE_, for use with
673 small data items. */
688 /* 16-bit section relative relocation. */
703 /* 16-bit lower half section relative relocation. */
718 /* 16-bit upper half section relative relocation. */
733 /* 16-bit upper half adjusted section relative relocation. */
748 /* Marker reloc for TLS. */
763 /* Computes the load module index of the load module that contains the
764 definition of its TLS sym. */
779 /* Computes a dtv-relative displacement, the difference between the value
780 of sym+add and the base address of the thread-local storage block that
781 contains the definition of sym, minus 0x8000. */
796 /* A 16 bit dtprel reloc. */
811 /* Like DTPREL16, but no overflow. */
826 /* Like DTPREL16_LO, but next higher group of 16 bits. */
841 /* Like DTPREL16_HI, but adjust for low 16 bits. */
856 /* Computes a tp-relative displacement, the difference between the value of
857 sym+add and the value of the thread pointer (r13). */
872 /* A 16 bit tprel reloc. */
887 /* Like TPREL16, but no overflow. */
902 /* Like TPREL16_LO, but next higher group of 16 bits. */
917 /* Like TPREL16_HI, but adjust for low 16 bits. */
932 /* Allocates two contiguous entries in the GOT to hold a tls_index structure,
933 with values (sym+add)@dtpmod and (sym+add)@dtprel, and computes the offset
934 to the first entry. */
949 /* Like GOT_TLSGD16, but no overflow. */
964 /* Like GOT_TLSGD16_LO, but next higher group of 16 bits. */
979 /* Like GOT_TLSGD16_HI, but adjust for low 16 bits. */
994 /* Allocates two contiguous entries in the GOT to hold a tls_index structure,
995 with values (sym+add)@dtpmod and zero, and computes the offset to the
996 first entry. */
1011 /* Like GOT_TLSLD16, but no overflow. */
1026 /* Like GOT_TLSLD16_LO, but next higher group of 16 bits. */
1041 /* Like GOT_TLSLD16_HI, but adjust for low 16 bits. */
1056 /* Allocates an entry in the GOT with value (sym+add)@dtprel, and computes
1057 the offset to the entry. */
1072 /* Like GOT_DTPREL16, but no overflow. */
1087 /* Like GOT_DTPREL16_LO, but next higher group of 16 bits. */
1102 /* Like GOT_DTPREL16_HI, but adjust for low 16 bits. */
1117 /* Allocates an entry in the GOT with value (sym+add)@tprel, and computes the
1118 offset to the entry. */
1133 /* Like GOT_TPREL16, but no overflow. */
1148 /* Like GOT_TPREL16_LO, but next higher group of 16 bits. */
1163 /* Like GOT_TPREL16_HI, but adjust for low 16 bits. */
1178 /* The remaining relocs are from the Embedded ELF ABI, and are not
1179 in the SVR4 ELF ABI. */
1181 /* 32 bit value resulting from the addend minus the symbol. */
1196 /* 16 bit value resulting from the addend minus the symbol. */
1211 /* 16 bit value resulting from the addend minus the symbol. */
1226 /* The high order 16 bits of the addend minus the symbol. */
1241 /* The high order 16 bits of the result of the addend minus the address,
1242 plus 1 if the contents of the low 16 bits, treated as a signed number,
1243 is negative. */
1258 /* 16 bit value resulting from allocating a 4 byte word to hold an
1259 address in the .sdata section, and returning the offset from
1260 _SDA_BASE_ for that relocation. */
1275 /* 16 bit value resulting from allocating a 4 byte word to hold an
1276 address in the .sdata2 section, and returning the offset from
1277 _SDA2_BASE_ for that relocation. */
1292 /* A sign-extended 16 bit value relative to _SDA2_BASE_, for use with
1293 small data items. */
1308 /* Relocate against either _SDA_BASE_ or _SDA2_BASE_, filling in the 16 bit
1309 signed offset from the appropriate base, and filling in the register
1310 field with the appropriate register (0, 2, or 13). */
1325 /* Relocation not handled: R_PPC_EMB_MRKREF */
1326 /* Relocation not handled: R_PPC_EMB_RELSEC16 */
1327 /* Relocation not handled: R_PPC_EMB_RELST_LO */
1328 /* Relocation not handled: R_PPC_EMB_RELST_HI */
1329 /* Relocation not handled: R_PPC_EMB_RELST_HA */
1330 /* Relocation not handled: R_PPC_EMB_BIT_FLD */
1332 /* PC relative relocation against either _SDA_BASE_ or _SDA2_BASE_, filling
1333 in the 16 bit signed offset from the appropriate base, and filling in the
1334 register field with the appropriate register (0, 2, or 13). */
1349 /* A 16 bit relative relocation. */
1364 /* A 16 bit relative relocation without overflow. */
1379 /* The high order 16 bits of a relative address. */
1394 /* The high order 16 bits of a relative address, plus 1 if the contents of
1395 the low 16 bits, treated as a signed number, is negative. */
1410 /* GNU extension to record C++ vtable hierarchy. */
1425 /* GNU extension to record C++ vtable member usage. */
1440 /* Phony reloc to handle AIX style TOC entries. */
1454 };
1455 \f
1456 /* Initialize the ppc_elf_howto_table, so that linear accesses can be done. */
1458 static void
1460 {
1465 i++)
1466 {
1472 }
1473 }
1477 bfd_reloc_code_real_type code)
1478 {
1481 /* Initialize howto table if not already done. */
1486 {
1575 }
1578 };
1580 /* Set the howto pointer for a PowerPC ELF reloc. */
1582 static void
1586 {
1587 /* Initialize howto table if not already done. */
1593 }
1595 /* Handle the R_PPC_ADDR16_HA and R_PPC_REL16_HA relocs. */
1597 static bfd_reloc_status_type
1605 {
1606 bfd_vma relocation;
1609 {
1612 }
1619 else
1631 }
1633 static bfd_reloc_status_type
1641 {
1642 /* If this is a relocatable link (output_bfd test tells us), just
1643 call the generic function. Any adjustment will be done at final
1644 link time. */
1650 {
1655 }
1657 }
1658 \f
1659 /* Sections created by the linker. */
1662 {
1663 /* Pointer to the bfd section. */
1665 /* Section name. */
1667 /* Associated bss section name. */
1669 /* Associated symbol name. */
1671 /* Value of symbol. */
1672 bfd_vma sym_val;
1675 /* Linked list of allocated pointer entries. This hangs off of the
1676 symbol lists, and provides allows us to return different pointers,
1677 based on different addend's. */
1680 {
1681 /* next allocated pointer for this symbol */
1683 /* offset of pointer from beginning of section */
1684 bfd_vma offset;
1685 /* addend used */
1686 bfd_vma addend;
1687 /* which linker section this is */
1691 struct ppc_elf_obj_tdata
1692 {
1695 /* A mapping from local symbols to offsets into the various linker
1696 sections added. This is index by the symbol index. */
1698 };
1700 #define ppc_elf_tdata(bfd) \
1701 ((struct ppc_elf_obj_tdata *) (bfd)->tdata.any)
1703 #define elf_local_ptr_offsets(bfd) \
1704 (ppc_elf_tdata (bfd)->linker_section_pointers)
1706 /* Override the generic function because we store some extras. */
1708 static bfd_boolean
1710 {
1716 }
1718 /* Fix bad default arch selected for a 32 bit input bfd when the
1719 default is 64 bit. */
1721 static bfd_boolean
1723 {
1725 {
1729 {
1730 /* Relies on arch after 64 bit default being 32 bit default. */
1733 }
1734 }
1736 }
1738 /* Function to set whether a module needs the -mrelocatable bit set. */
1740 static bfd_boolean
1742 {
1749 }
1751 /* Support for core dump NOTE sections. */
1753 static bfd_boolean
1755 {
1760 {
1765 /* pr_cursig */
1768 /* pr_pid */
1771 /* pr_reg */
1776 }
1778 /* Make a ".reg/999" section. */
1781 }
1783 static bfd_boolean
1785 {
1787 {
1796 }
1798 /* Note that for some reason, a spurious space is tacked
1799 onto the end of the args in some (at least one anyway)
1800 implementations, so strip it off if it exists. */
1802 {
1808 }
1811 }
1813 /* Return address for Ith PLT stub in section PLT, for relocation REL
1814 or (bfd_vma) -1 if it should not be included. */
1816 static bfd_vma
1820 {
1822 }
1824 /* Handle a PowerPC specific section when reading an object file. This
1825 is called when bfd_section_from_shdr finds a section with an unknown
1826 type. */
1828 static bfd_boolean
1833 {
1835 flagword flags;
1850 }
1852 /* Set up any other section flags and such that may be necessary. */
1854 static bfd_boolean
1858 {
1866 }
1868 /* If we have .sbss2 or .PPC.EMB.sbss0 output sections, we
1869 need to bump up the number of section headers. */
1871 static int
1873 {
1886 }
1888 /* Add extra PPC sections -- Note, for now, make .sbss2 and
1889 .PPC.EMB.sbss0 a normal section, and not a bss section so
1890 that the linker doesn't crater when trying to make more than
1891 2 sections. */
1894 {
1905 };
1907 /* This is what we want for new plt/got. */
1913 {
1916 /* See if this is one of the special sections. */
1923 {
1927 }
1930 }
1931 \f
1932 /* Very simple linked list structure for recording apuinfo values. */
1934 {
1937 }
1938 apuinfo_list;
1943 static void
1945 {
1947 }
1949 static void
1951 {
1955 {
1959 }
1968 }
1970 static unsigned
1972 {
1977 entry;
1982 }
1986 {
1992 ;
1995 }
1997 static void
1999 {
2003 {
2007 }
2010 }
2015 /* Scan the input BFDs and create a linked list of
2016 the APUinfo values that will need to be emitted. */
2018 static void
2020 {
2025 bfd_size_type output_section_size;
2035 /* Scan the input bfds, looking for apuinfo sections. */
2040 {
2043 {
2046 }
2047 }
2049 /* We need at least one input sections
2050 in order to make merging worthwhile. */
2054 /* Just make sure that the output section exists as well. */
2059 /* Allocate a buffer for the contents of the input sections. */
2067 /* Read in the input sections contents. */
2069 {
2079 {
2082 }
2086 {
2089 }
2091 /* Process the contents of the section. */
2095 /* Verify the contents of the header. Note - we have to
2096 extract the values this way in order to allow for a
2097 host whose endian-ness is different from the target. */
2109 /* Get the number of bytes used for apuinfo entries. */
2114 /* Make sure that we do not run off the end of the section. */
2118 /* Scan the apuinfo section, building a list of apuinfo numbers. */
2122 /* Update the offset. */
2124 }
2128 /* Compute the size of the output section. */
2138 fail:
2143 }
2145 /* Prevent the output section from accumulating the input sections'
2146 contents. We have already stored this in our linked list structure. */
2148 static bfd_boolean
2152 {
2155 }
2157 /* Finally we can generate the output section. */
2159 static void
2161 {
2166 bfd_size_type length;
2181 {
2185 }
2187 /* Create the apuinfo header. */
2196 {
2199 }
2210 }
2211 \f
2212 /* The following functions are specific to the ELF linker, while
2213 functions above are used generally. They appear in this file more
2214 or less in the order in which they are called. eg.
2215 ppc_elf_check_relocs is called early in the link process,
2216 ppc_elf_finish_dynamic_sections is one of the last functions
2217 called. */
2219 /* The PPC linker needs to keep track of the number of relocs that it
2220 decides to copy as dynamic relocs in check_relocs for each symbol.
2221 This is so that it can later discard them if they are found to be
2222 unnecessary. We store the information in a field extending the
2223 regular ELF linker hash table. */
2225 struct ppc_elf_dyn_relocs
2226 {
2229 /* The input section of the reloc. */
2232 /* Total number of relocs copied for the input section. */
2233 bfd_size_type count;
2235 /* Number of pc-relative relocs copied for the input section. */
2236 bfd_size_type pc_count;
2237 };
2239 /* Track PLT entries needed for a given symbol. We might need more
2240 than one glink entry per symbol. */
2241 struct plt_entry
2242 {
2245 /* -fPIC uses multiple GOT sections, one per file, called ".got2".
2246 This field stores the offset into .got2 used to initialise the
2247 GOT pointer reg. It will always be at least 32768 (and for
2248 current gcc this is the only offset used). */
2249 bfd_vma addend;
2251 /* The .got2 section. */
2254 /* PLT refcount or offset. */
2255 union
2256 {
2257 bfd_signed_vma refcount;
2258 bfd_vma offset;
2261 /* .glink stub offset. */
2262 bfd_vma glink_offset;
2263 };
2265 /* Of those relocs that might be copied as dynamic relocs, this macro
2266 selects those that must be copied when linking a shared library,
2267 even when the symbol is local. */
2269 #define MUST_BE_DYN_RELOC(RTYPE) \
2270 ((RTYPE) != R_PPC_REL24 \
2271 && (RTYPE) != R_PPC_REL14 \
2272 && (RTYPE) != R_PPC_REL14_BRTAKEN \
2273 && (RTYPE) != R_PPC_REL14_BRNTAKEN \
2274 && (RTYPE) != R_PPC_REL32)
2276 /* If ELIMINATE_COPY_RELOCS is non-zero, the linker will try to avoid
2277 copying dynamic variables from a shared lib into an app's dynbss
2278 section, and instead use a dynamic relocation to point into the
2279 shared lib. */
2280 #define ELIMINATE_COPY_RELOCS 1
2282 /* PPC ELF linker hash entry. */
2284 struct ppc_elf_link_hash_entry
2285 {
2288 /* If this symbol is used in the linker created sections, the processor
2289 specific backend uses this field to map the field into the offset
2290 from the beginning of the section. */
2293 /* Track dynamic relocs copied for this symbol. */
2296 /* Contexts in which symbol is used in the GOT (or TOC).
2297 TLS_GD .. TLS_TLS bits are or'd into the mask as the
2298 corresponding relocs are encountered during check_relocs.
2299 tls_optimize clears TLS_GD .. TLS_TPREL when optimizing to
2300 indicate the corresponding GOT entry type is not needed. */
2309 /* Nonzero if we have seen a small data relocation referring to this
2310 symbol. */
2312 };
2314 #define ppc_elf_hash_entry(ent) ((struct ppc_elf_link_hash_entry *) (ent))
2316 /* PPC ELF linker hash table. */
2318 struct ppc_elf_link_hash_table
2319 {
2322 /* Short-cuts to get to dynamic linker sections. */
2335 /* Shortcut to .__tls_get_addr. */
2338 /* TLS local dynamic got entry handling. */
2340 bfd_signed_vma refcount;
2341 bfd_vma offset;
2344 /* Offset of PltResolve function in glink. */
2345 bfd_vma glink_pltresolve;
2347 /* Size of reserved GOT entries. */
2349 /* Non-zero if allocating the header left a gap. */
2352 /* Whether to use new plt/got layout or not. */
2356 /* Small local sym to section mapping cache. */
2359 /* The (unloaded but important) .rela.plt.unloaded on VxWorks. */
2362 /* The .got.plt section (VxWorks only)*/
2365 /* Short-cuts to frequently used symbols on VxWorks targets. */
2368 /* True if the target system is VxWorks. */
2371 /* The size of PLT entries. */
2373 /* The distance between adjacent PLT slots. */
2375 /* The size of the first PLT entry. */
2377 };
2379 /* Get the PPC ELF linker hash table from a link_info structure. */
2381 #define ppc_elf_hash_table(p) \
2382 ((struct ppc_elf_link_hash_table *) (p)->hash)
2384 /* Create an entry in a PPC ELF linker hash table. */
2390 {
2391 /* Allocate the structure if it has not already been allocated by a
2392 subclass. */
2394 {
2399 }
2401 /* Call the allocation method of the superclass. */
2404 {
2408 }
2411 }
2413 /* Create a PPC ELF linker hash table. */
2417 {
2425 ppc_elf_link_hash_newfunc))
2426 {
2429 }
2451 }
2453 /* Create .got and the related sections. */
2455 static bfd_boolean
2457 {
2460 flagword flags;
2471 {
2475 }
2476 else
2477 {
2478 /* The powerpc .got has a blrl instruction in it. Mark it
2479 executable. */
2484 }
2494 }
2496 /* We have to create .dynsbss and .rela.sbss here so that they get mapped
2497 to output sections (just like _bfd_elf_create_dynamic_sections has
2498 to create .dynbss and .rela.bss). */
2500 static bfd_boolean
2502 {
2505 flagword flags;
2533 {
2540 }
2542 /* Create the section for VxWorks static plt relocations. */
2544 {
2554 }
2563 }
2565 /* Copy the extra info we tack onto an elf_link_hash_entry. */
2567 static void
2571 {
2573 bfd_signed_vma tmp;
2579 {
2581 {
2588 /* Add reloc counts against the weak sym to the strong sym
2589 list. Merge any entries against the same section. */
2591 {
2596 {
2601 }
2604 }
2606 }
2610 }
2615 /* If called to transfer flags for a weakdef during processing
2616 of elf_adjust_dynamic_symbol, don't copy non_got_ref.
2617 We clear it ourselves for ELIMINATE_COPY_RELOCS. */
2628 /* If we were called to copy over info for a weak sym, that's all. */
2632 /* Copy over the GOT refcount entries that we may have already seen to
2633 the symbol which just became indirect. */
2636 {
2639 }
2640 else
2643 /* And plt entries. */
2645 {
2647 {
2652 {
2657 {
2661 }
2664 }
2666 }
2670 }
2673 {
2678 }
2679 else
2681 }
2683 /* Return 1 if target is one of ours. */
2685 static bfd_boolean
2687 {
2692 }
2694 /* Hook called by the linker routine which adds symbols from an object
2695 file. We use it to put .comm items in .sbss, and not .bss. */
2697 static bfd_boolean
2705 {
2710 {
2711 /* Common symbols less than or equal to -G nn bytes are automatically
2712 put into .sbss. */
2717 {
2725 flags);
2728 }
2732 }
2735 }
2736 \f
2737 /* Create a special linker section. */
2739 static bfd_boolean
2742 flagword flags,
2744 {
2751 /* Record the first bfd that needs the special sections. */
2757 flags);
2764 }
2766 /* Find a linker generated pointer with a given addend and type. */
2769 elf_find_pointer_linker_section
2771 bfd_vma addend,
2773 {
2779 }
2781 /* Allocate a pointer to live in a linker created section. */
2783 static bfd_boolean
2788 {
2792 bfd_size_type amt;
2796 /* Is this a global symbol? */
2798 {
2801 /* Has this symbol already been allocated? If so, our work is done. */
2805 lsect))
2809 }
2810 else
2811 {
2812 /* Allocation of a pointer to a local symbol. */
2815 /* Allocate a table to hold the local symbols if first time. */
2817 {
2828 }
2830 /* Has this symbol already been allocated? If so, our work is done. */
2833 lsect))
2837 }
2839 /* Allocate space for a pointer in the linker section, and allocate
2840 a new pointer record from internal memory. */
2856 #ifdef DEBUG
2861 #endif
2864 }
2866 static bfd_boolean
2871 {
2876 {
2884 }
2890 }
2892 static bfd_boolean
2895 {
2904 {
2914 }
2917 }
2921 {
2930 }
2932 static void
2934 {
2937 abfd,
2940 }
2942 /* Look through the relocs for a section during the first phase, and
2943 allocate space in the global offset table or procedure linkage
2944 table. */
2946 static bfd_boolean
2951 {
2962 /* Don't do anything special with non-loaded, non-alloced sections.
2963 In particular, any relocs in such sections should not affect GOT
2964 and PLT reference counting (ie. we don't allow them to create GOT
2965 or PLT entries), there's no possibility or desire to optimize TLS
2966 relocs, and there's not much point in propagating relocs to shared
2967 libs that the dynamic linker won't relocate. */
2971 #ifdef DEBUG
2974 #endif
2976 /* Initialize howto table if not already done. */
2988 {
2997 else
2998 {
3003 }
3005 /* If a relocation refers to _GLOBAL_OFFSET_TABLE_, create the .got.
3006 This shows up in particular in an R_PPC_ADDR32 in the eabi
3007 startup code. */
3011 {
3017 }
3021 {
3051 dogottls:
3053 /* Fall thru */
3055 /* GOT16 relocations */
3060 /* This symbol requires a global offset table entry. */
3062 {
3067 }
3069 {
3072 }
3073 else
3074 /* This is a global offset table entry for a local symbol. */
3079 /* Indirect .sdata relocation. */
3082 {
3085 }
3095 /* Indirect .sdata2 relocation. */
3098 {
3101 }
3121 {
3124 }
3126 {
3128 /* We may need a copy reloc. */
3130 }
3139 #ifdef DEBUG
3141 #endif
3142 /* This symbol requires a procedure linkage table entry. We
3143 actually build the entry in finish_dynamic_symbol,
3144 because this might be a case of linking PIC code without
3145 linking in any dynamic objects, in which case we don't
3146 need to generate a procedure linkage table after all. */
3149 {
3150 /* It does not make sense to have a procedure linkage
3151 table entry for a local symbol. */
3154 abfd,
3155 sec,
3160 }
3161 else
3162 {
3168 }
3171 /* The following relocations don't need to propagate the
3172 relocation if linking a shared object since they are
3173 section relative. */
3192 /* These are just markers. */
3199 /* These should only appear in dynamic objects. */
3206 /* These aren't handled yet. We'll report an error later. */
3215 /* This refers only to functions defined in the shared library. */
3221 /* This relocation describes the C++ object vtable hierarchy.
3222 Reconstruct it for later use during GC. */
3228 /* This relocation describes which C++ vtable entries are actually
3229 used. Record for later use during GC. */
3235 /* We shouldn't really be seeing these. */
3241 /* Nor these. */
3260 {
3261 /* Old -fPIC gcc code has .long LCTOC1-LCFx just before
3262 the start of a function, which assembles to a REL32
3263 reference to .got2. If we detect one of these, then
3264 force the old PLT layout because the linker cannot
3265 reliably deduce the GOT pointer value needed for
3266 PLT call stubs. */
3270 r_symndx);
3273 }
3274 /* fall through */
3283 {
3286 }
3287 /* fall through */
3301 {
3302 /* We may need a plt entry if the symbol turns out to be
3303 a function defined in a dynamic object. */
3307 /* We may need a copy reloc too. */
3309 }
3311 dodyn:
3312 /* If we are creating a shared library, and this is a reloc
3313 against a global symbol, or a non PC relative reloc
3314 against a local symbol, then we need to copy the reloc
3315 into the shared library. However, if we are linking with
3316 -Bsymbolic, we do not need to copy a reloc against a
3317 global symbol which is defined in an object we are
3318 including in the link (i.e., DEF_REGULAR is set). At
3319 this point we have not seen all the input files, so it is
3320 possible that DEF_REGULAR is not set now but will be set
3321 later (it is never cleared). In case of a weak definition,
3322 DEF_REGULAR may be cleared later by a strong definition in
3323 a shared library. We account for that possibility below by
3324 storing information in the dyn_relocs field of the hash
3325 table entry. A similar situation occurs when creating
3326 shared libraries and symbol visibility changes render the
3327 symbol local.
3329 If on the other hand, we are creating an executable, we
3330 may need to keep relocations for symbols satisfied by a
3331 dynamic library if we manage to avoid copy relocs for the
3332 symbol. */
3339 || (ELIMINATE_COPY_RELOCS
3344 {
3348 #ifdef DEBUG
3350 "ppc_elf_check_relocs needs to "
3354 #endif
3356 {
3359 name = (bfd_elf_string_from_elf_section
3374 {
3375 flagword flags;
3381 name,
3382 flags);
3387 }
3389 }
3391 /* If this is a global symbol, we count the number of
3392 relocations we need for this symbol. */
3394 {
3396 }
3397 else
3398 {
3399 /* Track dynamic relocs needed for local syms too.
3400 We really need local syms available to do this
3401 easily. Oh well. */
3411 }
3415 {
3424 }
3429 }
3432 }
3433 }
3436 }
3437 \f
3438 /* Merge backend specific data from an object file to the output
3439 object file when linking. */
3441 static bfd_boolean
3443 {
3444 flagword old_flags;
3445 flagword new_flags;
3446 bfd_boolean error;
3452 /* Check if we have the same endianess. */
3459 {
3460 /* First call, no flags set. */
3463 }
3465 /* Compatible flags are ok. */
3467 ;
3469 /* Incompatible flags. */
3470 else
3471 {
3472 /* Warn about -mrelocatable mismatch. Allow -mrelocatable-lib
3473 to be linked with either. */
3477 {
3482 }
3485 {
3490 }
3492 /* The output is -mrelocatable-lib iff both the input files are. */
3496 /* The output is -mrelocatable iff it can't be -mrelocatable-lib,
3497 but each input file is either -mrelocatable or -mrelocatable-lib. */
3503 /* Do not warn about eabi vs. V.4 mismatch, just or in the bit if
3504 any module uses it. */
3510 /* Warn about any other mismatches. */
3512 {
3518 }
3521 {
3524 }
3525 }
3528 }
3529 \f
3530 /* Choose which PLT scheme to use, and set .plt flags appropriately.
3531 Returns -1 on error, 0 for old PLT, 1 for new PLT. */
3532 int
3536 {
3538 flagword flags;
3545 {
3546 /* The VxWorks PLT is a loaded section with contents. */
3553 }
3555 {
3559 /* The new PLT is a loaded section. */
3564 /* The new GOT is not executable. */
3568 }
3569 else
3570 {
3571 /* Stop an unused .glink section from affecting .text alignment. */
3575 }
3577 }
3578 \f
3579 /* Return the section that should be marked against GC for a given
3580 relocation. */
3588 {
3590 {
3592 {
3599 {
3609 }
3610 }
3611 }
3612 else
3616 }
3618 /* Update the got, plt and dynamic reloc reference counts for the
3619 section being removed. */
3621 static bfd_boolean
3626 {
3647 {
3654 {
3666 {
3667 /* Everything must go for SEC. */
3670 }
3671 }
3675 {
3681 /* Fall thru */
3700 {
3703 }
3705 {
3708 }
3718 /* Fall thru */
3741 {
3746 }
3751 }
3752 }
3754 }
3755 \f
3756 /* Set htab->tls_get_addr and call the generic ELF tls_setup function. */
3758 asection *
3760 {
3767 {
3770 }
3775 }
3777 /* Run through all the TLS relocs looking for optimization
3778 opportunities. */
3780 bfd_boolean
3783 {
3793 {
3799 {
3803 /* Read the relocations. */
3812 {
3818 bfd_boolean is_local;
3822 {
3830 }
3839 {
3844 /* These relocs should never be against a symbol
3845 defined in a shared lib. Leave them alone if
3846 that turns out to be the case. */
3852 /* LD -> LE */
3863 /* GD -> LE */
3865 else
3866 /* GD -> IE */
3878 {
3879 /* IE -> LE */
3883 }
3884 else
3894 {
3898 }
3905 }
3908 {
3910 {
3911 /* We managed to get rid of a got entry. */
3914 }
3916 }
3917 else
3918 {
3924 {
3931 {
3935 }
3936 }
3942 {
3943 /* We managed to get rid of a got entry. */
3946 }
3949 }
3953 }
3957 }
3961 {
3964 else
3966 }
3967 }
3969 }
3970 \f
3971 /* Adjust a symbol defined by a dynamic object and referenced by a
3972 regular object. The current definition is in some section of the
3973 dynamic object, but we're not including those sections. We have to
3974 change the definition to something the rest of the link can
3975 understand. */
3977 static bfd_boolean
3980 {
3985 #ifdef DEBUG
3988 #endif
3990 /* Make sure we know what is going on here. */
3999 /* Deal with function syms. */
4002 {
4003 /* Clear procedure linkage table information for any symbol that
4004 won't need a .plt entry. */
4013 {
4014 /* A PLT entry is not required/allowed when:
4016 1. We are not using ld.so; because then the PLT entry
4017 can't be set up, so we can't use one. In this case,
4018 ppc_elf_adjust_dynamic_symbol won't even be called.
4020 2. GC has rendered the entry unused.
4022 3. We know for certain that a call to this symbol
4023 will go to this object, or will remain undefined. */
4026 }
4028 }
4029 else
4032 /* If this is a weak symbol, and there is a real definition, the
4033 processor independent code will have arranged for us to see the
4034 real definition first, and we can just use the same value. */
4036 {
4044 }
4046 /* This is a reference to a symbol defined by a dynamic object which
4047 is not a function. */
4049 /* First, a fudge for old shared libs that export some symbols they
4050 should not. */
4054 {
4055 /* These symbols will be defined later, as if they were defined in
4056 a linker script. We don't want to use a definition in a shared
4057 object. */
4065 }
4067 /* If we are creating a shared library, we must presume that the
4068 only references to the symbol are via the global offset table.
4069 For such cases we need not do anything here; the relocations will
4070 be handled correctly by relocate_section. */
4074 /* If there are no references to this symbol that do not use the
4075 GOT, we don't need to generate a copy reloc. */
4079 /* If we didn't find any dynamic relocs in read-only sections, then we'll
4080 be keeping the dynamic relocs and avoiding the copy reloc. We can't
4081 do this if there are any small data relocations. */
4084 {
4087 {
4091 }
4094 {
4097 }
4098 }
4100 /* We must allocate the symbol in our .dynbss section, which will
4101 become part of the .bss section of the executable. There will be
4102 an entry for this symbol in the .dynsym section. The dynamic
4103 object will contain position independent code, so all references
4104 from the dynamic object to this symbol will go through the global
4105 offset table. The dynamic linker will use the .dynsym entry to
4106 determine the address it must put in the global offset table, so
4107 both the dynamic object and the regular object will refer to the
4108 same memory location for the variable.
4110 Of course, if the symbol is referenced using SDAREL relocs, we
4111 must instead allocate it in .sbss. */
4115 else
4119 /* We must generate a R_PPC_COPY reloc to tell the dynamic linker to
4120 copy the initial value out of the dynamic object and into the
4121 runtime process image. We need to remember the offset into the
4122 .rela.bss section we are going to use. */
4124 {
4129 else
4134 }
4136 /* We need to figure out the alignment required for this symbol. I
4137 have no idea how ELF linkers handle this. */
4142 /* Apply the required alignment. */
4145 {
4148 }
4150 /* Define the symbol as being at this point in the section. */
4154 /* Increment the section size to make room for the symbol. */
4158 }
4159 \f
4160 /* Allocate NEED contiguous space in .got, and return the offset.
4161 Handles allocation of the got header when crossing 32k. */
4163 static bfd_vma
4165 {
4166 bfd_vma where;
4173 {
4176 }
4178 {
4181 }
4182 else
4183 {
4186 {
4189 }
4192 }
4194 }
4196 /* Allocate space in associated reloc sections for dynamic relocs. */
4198 static bfd_boolean
4200 {
4210 /* When warning symbols are created, they **replace** the "real"
4211 entry in the hash table, thus we never get to see the real
4212 symbol in a hash traversal. So look at it now. */
4217 {
4224 {
4225 /* Make sure this symbol is output as a dynamic symbol. */
4228 {
4231 }
4235 {
4239 {
4241 {
4244 }
4249 {
4252 }
4256 {
4259 }
4261 }
4262 else
4263 {
4265 {
4266 /* If this is the first .plt entry, make room
4267 for the special first entry. */
4271 /* The PowerPC PLT is actually composed of two
4272 parts, the first part is 2 words (for a load
4273 and a jump), and then there is a remaining
4274 word available at the end. */
4281 /* If this symbol is not defined in a regular
4282 file, and we are not generating a shared
4283 library, then set the symbol to this location
4284 in the .plt. This is required to make
4285 function pointers compare as equal between
4286 the normal executable and the shared library. */
4289 {
4292 }
4294 /* Make room for this entry. */
4296 /* After the 8192nd entry, room for two entries
4297 is allocated. */
4303 }
4305 }
4307 /* We also need to make an entry in the .rela.plt section. */
4309 {
4313 {
4314 /* Allocate space for the unloaded relocations. */
4316 {
4319 {
4323 }
4328 }
4330 /* Every PLT entry has an associated GOT entry in
4331 .got.plt. */
4333 }
4335 }
4336 }
4337 else
4341 {
4344 }
4345 }
4346 }
4347 else
4348 {
4351 }
4355 {
4356 /* Make sure this symbol is output as a dynamic symbol. */
4359 {
4362 }
4366 /* If just an LD reloc, we'll just use htab->tlsld_got.offset. */
4368 else
4369 {
4370 bfd_boolean dyn;
4373 {
4382 }
4383 else
4391 {
4392 /* All the entries we allocated need relocs.
4393 Except LD only needs one. */
4397 }
4398 }
4399 }
4400 else
4406 /* In the shared -Bsymbolic case, discard space allocated for
4407 dynamic pc-relative relocs against symbols which turn out to be
4408 defined in regular objects. For the normal shared case, discard
4409 space for relocs that have become local due to symbol visibility
4410 changes. */
4413 {
4414 /* Relocs that use pc_count are those that appear on a call insn,
4415 or certain REL relocs (see MUST_BE_DYN_RELOC) that can be
4416 generated via assembly. We want calls to protected symbols to
4417 resolve directly to the function rather than going via the plt.
4418 If people want function pointer comparisons to work as expected
4419 then they should avoid writing weird assembly. */
4421 {
4425 {
4430 else
4432 }
4433 }
4435 /* Also discard relocs on undefined weak syms with non-default
4436 visibility. */
4441 /* Make sure undefined weak symbols are output as a dynamic symbol
4442 in PIEs. */
4448 {
4451 }
4452 }
4454 {
4455 /* For the non-shared case, discard space for relocs against
4456 symbols which turn out to need copy relocs or are not
4457 dynamic. */
4462 {
4463 /* Make sure this symbol is output as a dynamic symbol.
4464 Undefined weak syms won't yet be marked as dynamic. */
4467 {
4470 }
4472 /* If that succeeded, we know we'll be keeping all the
4473 relocs. */
4476 }
4480 keep: ;
4481 }
4483 /* Finally, allocate space. */
4485 {
4488 }
4491 }
4493 /* Find any dynamic relocs that apply to read-only sections. */
4495 static bfd_boolean
4497 {
4507 {
4513 {
4516 /* Not an error, just cut short the traversal. */
4518 }
4519 }
4521 }
4523 /* Set the sizes of the dynamic sections. */
4525 static bfd_boolean
4528 {
4531 bfd_boolean relocs;
4534 #ifdef DEBUG
4536 #endif
4542 {
4543 /* Set the contents of the .interp section to the interpreter. */
4545 {
4550 }
4551 }
4555 else
4558 /* Set up .got offsets for local syms, and space for local dynamic
4559 relocs. */
4561 {
4565 bfd_size_type locsymcount;
4572 {
4579 {
4582 {
4583 /* Input section has been discarded, either because
4584 it is a copy of a linkonce section or due to
4585 linker script /DISCARD/, so we'll be discarding
4586 the relocs too. */
4587 }
4589 {
4596 }
4597 }
4598 }
4610 {
4612 {
4613 /* If just an LD reloc, we'll just use
4614 htab->tlsld_got.offset. */
4617 }
4618 else
4619 {
4622 {
4629 }
4630 else
4636 }
4637 }
4638 else
4640 }
4643 {
4647 }
4648 else
4652 {
4653 /* Save the GOT and PLT symbols in the hash table for easy access.
4654 Mark them as having relocations; they might not, but we won't
4655 know for sure until we build the GOT in finish_dynamic_symbol. */
4667 /* If the PLT is executable then give the symbol function type. */
4670 }
4672 /* Allocate space for global sym dynamic relocs. */
4676 {
4679 /* If we haven't allocated the header, do so now. When we get here,
4680 for old plt/got the got size will be 0 to 32764 (not allocated),
4681 or 32780 to 65536 (header allocated). For new plt/got, the
4682 corresponding ranges are 0 to 32768 and 32780 to 65536. */
4684 {
4689 }
4692 }
4695 {
4697 /* Space for the branch table. */
4699 /* Pad out to align the start of PLTresolve. */
4702 }
4704 /* We've now determined the sizes of the various dynamic sections.
4705 Allocate memory for them. */
4708 {
4721 {
4722 /* We'd like to strip these sections if they aren't needed, but if
4723 we've exported dynamic symbols from them we must leave them.
4724 It's too late to tell BFD to get rid of the symbols. */
4727 /* Strip this section if we don't need it; see the
4728 comment below. */
4729 }
4732 {
4733 /* Strip these too. */
4734 }
4736 {
4738 {
4739 /* Remember whether there are any relocation sections. */
4742 /* We use the reloc_count field as a counter if we need
4743 to copy relocs into the output file. */
4745 }
4746 }
4747 else
4748 {
4749 /* It's not one of our sections, so don't allocate space. */
4751 }
4754 {
4755 /* If we don't need this section, strip it from the
4756 output file. This is mostly to handle .rela.bss and
4757 .rela.plt. We must create both sections in
4758 create_dynamic_sections, because they must be created
4759 before the linker maps input sections to output
4760 sections. The linker does that before
4761 adjust_dynamic_symbol is called, and it is that
4762 function which decides whether anything needs to go
4763 into these sections. */
4766 }
4771 /* Allocate memory for the section contents. */
4775 }
4778 {
4779 /* Add some entries to the .dynamic section. We fill in the
4780 values later, in ppc_elf_finish_dynamic_sections, but we
4781 must add the entries now so that we get the correct size for
4782 the .dynamic section. The DT_DEBUG entry is filled in by the
4783 dynamic linker and used by the debugger. */
4784 #define add_dynamic_entry(TAG, VAL) \
4785 _bfd_elf_add_dynamic_entry (info, TAG, VAL)
4788 {
4791 }
4794 {
4800 }
4803 {
4806 }
4809 {
4814 }
4816 /* If any dynamic relocs apply to a read-only section, then we
4817 need a DT_TEXTREL entry. */
4820 info);
4823 {
4826 }
4827 }
4828 #undef add_dynamic_entry
4831 }
4832 \f
4833 #define ARRAY_SIZE(a) (sizeof (a) / sizeof ((a)[0]))
4836 {
4845 };
4848 {
4853 };
4855 static bfd_boolean
4860 {
4861 struct one_fixup
4862 {
4865 bfd_vma toff;
4866 bfd_vma trampoff;
4867 };
4875 bfd_boolean changed;
4877 bfd_size_type trampoff;
4882 /* Nothing to do if there are no relocations, and no need to do
4883 anything with non-alloc sections. */
4890 /* Space for a branch around any trampolines. */
4895 /* Get a copy of the native relocations. */
4906 {
4918 {
4933 }
4935 /* Get the value of the symbol referred to by the reloc. */
4937 {
4938 /* A local symbol. */
4941 /* Read this BFD's local symbols. */
4943 {
4951 }
4959 else
4964 }
4965 else
4966 {
4967 /* Global symbol handling. */
4982 {
4986 {
4988 {
4991 }
4992 else
4993 {
4996 }
4997 }
4998 }
5000 ;
5003 {
5006 }
5007 else
5011 }
5013 /* If the branch and target are in the same section, you have
5014 no hope of adding stubs. We'll error out later should the
5015 branch overflow. */
5019 /* There probably isn't any reason to handle symbols in
5020 SEC_MERGE sections; SEC_MERGE doesn't seem a likely
5021 attribute for a code section, and we are only looking at
5022 branches. However, implement it correctly here as a
5023 reference for other target relax_section functions. */
5025 {
5026 /* At this stage in linking, no SEC_MERGE symbol has been
5027 adjusted, so all references to such symbols need to be
5028 passed through _bfd_merged_section_offset. (Later, in
5029 relocate_section, all SEC_MERGE symbols *except* for
5030 section symbols have been adjusted.)
5032 gas may reduce relocations against symbols in SEC_MERGE
5033 sections to a relocation against the section symbol when
5034 the original addend was zero. When the reloc is against
5035 a section symbol we should include the addend in the
5036 offset passed to _bfd_merged_section_offset, since the
5037 location of interest is the original symbol. On the
5038 other hand, an access to "sym+addend" where "sym" is not
5039 a section symbol should not include the addend; Such an
5040 access is presumed to be an offset from "sym"; The
5041 location of interest is just "sym". */
5047 toff);
5051 }
5052 /* PLTREL24 addends are special. */
5061 /* If the branch is in range, no need to do anything. */
5065 /* Look for an existing fixup to this address. */
5071 {
5077 /* Oh dear, we can't reach a trampoline. Don't try to add
5078 one. We'll report an error later. */
5082 {
5086 }
5087 else
5088 {
5092 }
5101 /* Hijack the old relocation. Since we need two
5102 relocations for this use a "composite" reloc. */
5104 stub_rtype);
5107 /* Record the fixup so we don't do it again this section. */
5116 }
5117 else
5118 {
5123 /* Nop out the reloc, since we're finalizing things here. */
5125 }
5127 /* Get the section contents. */
5129 {
5130 /* Get cached copy if it exists. */
5133 else
5134 {
5135 /* Go get them off disk. */
5138 }
5139 }
5141 /* Fix up the existing branch to hit the trampoline. */
5144 {
5162 }
5163 }
5165 /* Write out the trampolines. */
5168 {
5171 bfd_vma val;
5174 do
5175 {
5179 }
5187 /* Branch around the trampolines. */
5195 {
5198 }
5199 else
5200 {
5203 }
5207 {
5209 i++;
5213 }
5215 }
5219 {
5222 else
5223 {
5224 /* Cache the symbols for elf_link_input_bfd. */
5226 }
5227 }
5231 {
5234 else
5235 {
5236 /* Cache the section contents for elf_link_input_bfd. */
5238 }
5239 }
5242 {
5245 else
5247 }
5252 error_return:
5262 }
5263 \f
5264 /* Set _SDA_BASE_, _SDA2_BASE, and sbss start and end syms. They are
5265 set here rather than via PROVIDE in the default linker script,
5266 because using PROVIDE inside an output section statement results in
5267 unnecessary output sections. Using PROVIDE outside an output section
5268 statement runs the risk of section alignment affecting where the
5269 section starts. */
5271 void
5273 {
5277 bfd_vma val;
5282 {
5294 {
5295 /* VxWorks executables are relocatable, so the sdata base symbols
5296 must be section-relative. */
5299 }
5300 else
5301 {
5304 }
5307 }
5308 }
5310 /* What to do when ld finds relocations against symbols defined in
5311 discarded sections. */
5313 static unsigned int
5315 {
5323 }
5324 \f
5325 /* Fill in the address for a pointer generated in a linker section. */
5327 static bfd_vma
5331 bfd_vma relocation,
5333 {
5339 {
5340 /* Handle global symbol. */
5346 }
5347 else
5348 {
5349 /* Handle local symbol. */
5354 }
5358 lsect);
5361 /* Offset will always be a multiple of four, so use the bottom bit
5362 as a "written" flag. */
5364 {
5369 }
5375 #ifdef DEBUG
5379 #endif
5381 /* Subtract out the addend, because it will get added back in by the normal
5382 processing. */
5384 }
5386 /* The RELOCATE_SECTION function is called by the ELF backend linker
5387 to handle the relocations for a section.
5389 The relocs are always passed as Rela structures; if the section
5390 actually uses Rel structures, the r_addend field will always be
5391 zero.
5393 This function is responsible for adjust the section contents as
5394 necessary, and (if using Rela relocs and generating a
5395 relocatable output file) adjusting the reloc addend as
5396 necessary.
5398 This function does not have to worry about setting the reloc
5399 address or the reloc symbol index.
5401 LOCAL_SYMS is a pointer to the swapped in local symbols.
5403 LOCAL_SECTIONS is an array giving the section in the input file
5404 corresponding to the st_shndx field of each local symbol.
5406 The global hash table entry for the global symbols can be found
5407 via elf_sym_hashes (input_bfd).
5409 When generating relocatable output, this function must handle
5410 STB_LOCAL/STT_SECTION symbols specially. The output symbol is
5411 going to be the section symbol corresponding to the output
5412 section, which means that the addend must be adjusted
5413 accordingly. */
5415 static bfd_boolean
5424 {
5430 Elf_Internal_Rela outrel;
5436 #ifdef DEBUG
5442 #endif
5447 {
5454 {
5460 {
5461 /* R_PPC_PLTREL24 is rather special. If non-zero, the
5462 addend specifies the GOT pointer offset within .got2. */
5464 }
5465 }
5467 }
5469 /* Initialize howto table if not already done. */
5480 {
5482 bfd_vma addend;
5483 bfd_reloc_status_type r;
5490 bfd_vma relocation;
5492 bfd_boolean unresolved_reloc;
5493 bfd_boolean warned;
5505 {
5511 }
5512 else
5513 {
5520 }
5522 /* TLS optimizations. Replace instruction sequences and relocs
5523 based on information we collected in tls_optimize. We edit
5524 RELOCS so that --emit-relocs will output something sensible
5525 for the final instruction stream. */
5529 {
5533 {
5537 }
5538 }
5540 /* Ensure reloc mapping code below stays sane. */
5551 {
5559 {
5560 bfd_vma insn;
5567 }
5573 {
5582 else
5585 /* add -> addi. */
5591 /* load and store indexed -> dform. */
5595 /* ldx, ldux, stdx, stdux -> ld, ldu, std, stdu. */
5600 /* lwax -> lwa. */
5602 else
5608 /* Was PPC_TLS which sits on insn boundary, now
5609 PPC_TPREL16_LO which is at insn+2. */
5611 }
5624 {
5625 tls_gdld_hi:
5629 else
5630 {
5634 }
5636 }
5649 {
5650 tls_get_addr_check:
5652 {
5657 bfd_vma offset;
5659 /* The next instruction should be a call to
5660 __tls_get_addr. Peek at the reloc to be sure. */
5678 /* OK, it checks out. Replace the call. */
5683 {
5684 /* IE */
5692 }
5693 else
5694 {
5695 /* LE */
5699 {
5700 /* Was an LD reloc. */
5704 }
5708 R_PPC_TPREL16_LO);
5710 }
5714 {
5715 /* We changed the symbol on an LD reloc. Start over
5716 in order to get h, sym, sec etc. right. */
5717 rel--;
5719 }
5720 }
5721 }
5723 }
5725 /* Handle other relocations that tweak non-addend part of insn. */
5728 {
5732 /* Branch taken prediction relocations. */
5736 /* Fall thru */
5738 /* Branch not taken prediction relocations. */
5749 /* Invert 'y' bit if not the default. */
5755 }
5763 {
5780 /* GOT16 relocations. Like an ADDR16 using the symbol's
5781 address in the GOT as relocation value instead of the
5782 symbol's value itself. Also, create a GOT entry for the
5783 symbol and put the symbol value there. */
5816 dogot:
5817 {
5818 /* Relocation is to the entry for this symbol in the global
5819 offset table. */
5820 bfd_vma off;
5833 {
5834 bfd_boolean dyn;
5839 /* This is actually a static link, or it is a
5840 -Bsymbolic link and the symbol is defined
5841 locally, or the symbol was forced to be local
5842 because of a version file. */
5843 ;
5844 else
5845 {
5848 }
5850 }
5851 else
5852 {
5856 }
5858 /* The offset must always be a multiple of 4. We use the
5859 least significant bit to record whether we have already
5860 processed this entry. */
5864 else
5865 {
5876 /* We might have multiple got entries for this sym.
5877 Initialize them all. */
5878 do
5879 {
5883 {
5886 }
5888 {
5891 }
5893 {
5896 }
5898 {
5901 }
5903 /* Generate relocs for the dynamic linker. */
5908 {
5914 {
5917 {
5924 outrel.r_info
5926 }
5927 }
5934 else
5937 {
5941 }
5946 }
5948 /* Init the .got section contents if we're not
5949 emitting a reloc. */
5950 else
5951 {
5957 {
5963 {
5967 }
5968 }
5971 }
5976 }
5981 }
5987 {
5989 {
5995 {
5999 {
6002 }
6003 }
6004 }
6005 }
6010 /* Addends on got relocations don't make much sense.
6011 x+off@got is actually x@got+off, and since the got is
6012 generated by a hash table traversal, the value in the
6013 got at entry m+n bears little relation to the entry m. */
6017 input_bfd,
6018 input_section,
6021 sym_name);
6022 }
6025 /* Relocations that need no special processing. */
6027 /* It makes no sense to point a local relocation
6028 at a symbol not in this object. */
6030 {
6033 input_bfd,
6034 input_section,
6036 TRUE))
6039 }
6049 /* Relocations that may need to be propagated if this is a shared
6050 object. */
6056 /* The TPREL16 relocs shouldn't really be used in shared
6057 libs as they will result in DT_TEXTREL being set, but
6058 support them anyway. */
6085 /* If these relocations are not to a named symbol, they can be
6086 handled right here, no need to bother the dynamic linker. */
6090 /* fall through */
6092 /* Relocations that always need to be propagated if this is a shared
6093 object. */
6105 /* r_symndx will be zero only for relocs against symbols
6106 from removed linkonce sections, or sections discarded by
6107 a linker script. */
6108 dodyn:
6111 /* Fall thru. */
6115 /* Fall thru. */
6123 || (ELIMINATE_COPY_RELOCS
6130 {
6133 #ifdef DEBUG
6138 #endif
6140 /* When generating a shared object, these relocations
6141 are copied into the output file to be resolved at run
6142 time. */
6144 {
6147 name = (bfd_elf_string_from_elf_section
6156 input_section),
6161 }
6177 {
6181 }
6182 else
6183 {
6188 else
6189 {
6195 {
6198 }
6199 else
6200 {
6203 /* We are turning this relocation into one
6204 against a section symbol. It would be
6205 proper to subtract the symbol's value,
6206 osec->vma, from the emitted reloc addend,
6207 but ld.so expects buggy relocs. */
6211 #ifdef DEBUG
6216 #endif
6217 }
6220 }
6221 }
6230 /* This reloc will be computed at runtime. We clear the memory
6231 so that it contains predictable value. */
6235 {
6239 }
6240 }
6245 {
6252 else
6257 }
6260 /* Fall thru */
6266 /* Fall thru */
6269 relax32:
6270 {
6277 /* We're clearing the bits for R_PPC_ADDR16_HA
6278 and R_PPC_ADDR16_LO here. */
6282 /* t0 is HA, t1 is LO */
6289 }
6292 /* Indirect .sdata relocation. */
6295 relocation
6300 /* Indirect .sdata2 relocation. */
6303 relocation
6308 /* Handle the TOC16 reloc. We want to use the offset within the .got
6309 section, not the actual VMA. This is appropriate when generating
6310 an embedded ELF object, for which the .got section acts like the
6311 AIX .toc section. */
6322 /* Relocation is to the entry for this symbol in the
6323 procedure linkage table. */
6324 {
6330 {
6331 /* We didn't make a PLT entry for this symbol. This
6332 happens when statically linking PIC code, or when
6333 using -Bsymbolic. */
6335 }
6342 else
6346 }
6349 /* Relocate against _SDA_BASE_. */
6351 {
6360 {
6364 input_bfd,
6365 sym_name,
6367 name);
6368 }
6370 }
6373 /* Relocate against _SDA2_BASE_. */
6375 {
6382 {
6386 input_bfd,
6387 sym_name,
6389 name);
6394 }
6396 }
6399 /* Relocate against either _SDA_BASE_, _SDA2_BASE_, or 0. */
6402 {
6412 {
6415 }
6419 {
6422 }
6426 {
6428 }
6430 else
6431 {
6435 input_bfd,
6436 sym_name,
6438 name);
6443 }
6450 }
6451 }
6454 /* Relocate against the beginning of the section. */
6463 /* Negative relocations. */
6489 input_bfd,
6491 sym_name);
6496 }
6498 /* Do any further special processing. */
6500 {
6517 /* It's just possible that this symbol is a weak symbol
6518 that's not actually defined anywhere. In that case,
6519 'sec' would be NULL, and we should leave the symbol
6520 alone (it will be set to zero elsewhere in the link). */
6522 /* Add 0x10000 if sign bit in 0:15 is set.
6523 Bits 0:15 are not used. */
6526 }
6528 #ifdef DEBUG
6533 sym_name,
6534 r_symndx,
6537 #endif
6542 {
6545 input_bfd,
6546 input_section,
6549 sym_name);
6551 }
6554 input_bfd,
6555 input_section,
6556 contents,
6558 relocation,
6559 addend);
6562 {
6564 {
6570 {
6571 /* Assume this is a call protected by other code that
6572 detect the symbol is undefined. If this is the case,
6573 we can safely ignore the overflow. If not, the
6574 program is hosed anyway, and a little warning isn't
6575 going to help. */
6578 }
6582 sym_name,
6585 input_bfd,
6586 input_section,
6589 }
6590 else
6591 {
6597 }
6598 }
6599 }
6601 #ifdef DEBUG
6603 #endif
6606 }
6607 \f
6608 #define PPC_LO(v) ((v) & 0xffff)
6609 #define PPC_HI(v) (((v) >> 16) & 0xffff)
6610 #define PPC_HA(v) PPC_HI ((v) + 0x8000)
6612 /* Finish up dynamic symbol handling. We set the contents of various
6613 dynamic sections here. */
6615 static bfd_boolean
6620 {
6623 bfd_boolean doneone;
6625 #ifdef DEBUG
6628 #endif
6636 {
6638 {
6639 Elf_Internal_Rela rela;
6641 bfd_vma reloc_index;
6645 else
6646 {
6652 }
6654 /* This symbol has an entry in the procedure linkage table.
6655 Set it up. */
6657 {
6658 bfd_vma got_offset;
6661 /* The first three entries in .got.plt are reserved. */
6664 /* Use the right PLT. */
6668 /* Fill in the .plt on VxWorks. */
6670 {
6680 }
6681 else
6682 {
6683 bfd_vma got_loc = (got_offset
6696 }
6703 /* This instruction is an immediate load. The value loaded is
6704 the byte offset of the R_PPC_JMP_SLOT relocation from the
6705 start of the .rela.plt section. The value is stored in the
6706 low-order 16 bits of the load instruction. */
6707 /* NOTE: It appears that this is now an index rather than a
6708 prescaled offset. */
6712 /* This instruction is a PC-relative branch whose target is
6713 the start of the PLT section. The address of this branch
6714 instruction is 20 bytes beyond the start of this PLT entry.
6715 The address is encoded in bits 6-29, inclusive. The value
6716 stored is right-shifted by two bits, permitting a 26-bit
6717 offset. */
6727 /* Fill in the GOT entry corresponding to this PLT slot with
6728 the address immediately after the the "bctr" instruction
6729 in this PLT entry. */
6736 {
6737 /* Fill in a couple of entries in .rela.plt.unloaded. */
6743 /* Provide the @ha relocation for the first instruction. */
6748 R_PPC_ADDR16_HA);
6753 /* Provide the @l relocation for the second instruction. */
6758 R_PPC_ADDR16_LO);
6763 /* Provide a relocation for the GOT entry corresponding to this
6764 PLT slot. Point it at the middle of the .plt entry. */
6769 R_PPC_ADDR32);
6772 }
6774 /* VxWorks uses non-standard semantics for R_PPC_JMP_SLOT.
6775 In particular, the offset for the relocation is not the
6776 address of the PLT entry for this function, as specified
6777 by the ABI. Instead, the offset is set to the address of
6778 the GOT slot for this function. See EABI 4.4.4.1. */
6783 }
6784 else
6785 {
6790 {
6791 /* We don't need to fill in the .plt. The ppc dynamic
6792 linker will fill it in. */
6793 }
6794 else
6795 {
6801 }
6802 }
6804 /* Fill in the entry in the .rela.plt section. */
6813 {
6814 /* Mark the symbol as undefined, rather than as defined in
6815 the .plt section. Leave the value alone. */
6817 /* If the symbol is weak, we do need to clear the value.
6818 Otherwise, the PLT entry would provide a definition for
6819 the symbol even if the symbol wasn't defined anywhere,
6820 and so the symbol would never be NULL. */
6823 }
6825 }
6828 {
6829 bfd_vma plt;
6838 {
6853 {
6862 }
6863 else
6864 {
6873 }
6874 }
6875 else
6876 {
6886 /* We only need one non-PIC glink stub. */
6888 }
6889 }
6890 else
6892 }
6895 {
6897 Elf_Internal_Rela rela;
6900 /* This symbols needs a copy reloc. Set it up. */
6902 #ifdef DEBUG
6904 #endif
6910 else
6921 }
6923 #ifdef DEBUG
6925 #endif
6927 /* Mark some specially defined symbols as absolute. */
6936 }
6937 \f
6938 static enum elf_reloc_type_class
6940 {
6942 {
6953 }
6954 }
6955 \f
6956 /* Finish up the dynamic sections. */
6958 static bfd_boolean
6961 {
6965 bfd_vma got;
6968 #ifdef DEBUG
6970 #endif
6977 else
6987 {
6995 {
6996 Elf_Internal_Dyn dyn;
7002 {
7006 else
7026 {
7030 }
7035 }
7038 }
7039 }
7041 /* Add a blrl instruction at _GLOBAL_OFFSET_TABLE_-4 so that a function can
7042 easily find the address of the _GLOBAL_OFFSET_TABLE_. */
7044 {
7046 bfd_vma val;
7058 }
7060 /* Fill in the first entry in the VxWorks procedure linkage table. */
7062 {
7063 /* Use the right PLT. */
7069 {
7070 bfd_vma got_value =
7080 }
7081 else
7082 {
7085 }
7094 {
7095 Elf_Internal_Rela rela;
7100 /* Output the @ha relocation for the first instruction. */
7109 /* Output the @l relocation for the second instruction. */
7118 /* Fix up the remaining relocations. They may have the wrong
7119 symbol index for _G_O_T_ or _P_L_T_ depending on the order
7120 in which symbols were output. */
7122 {
7123 Elf_Internal_Rela rel;
7139 }
7140 }
7141 }
7144 {
7147 bfd_vma res0;
7150 /*
7151 * PIC glink code is the following:
7152 *
7153 * # ith PLT code stub.
7154 * addis 11,30,(plt+(i-1)*4-got)@ha
7155 * lwz 11,(plt+(i-1)*4-got)@l(11)
7156 * mtctr 11
7157 * bctr
7158 *
7159 * # A table of branches, one for each plt entry.
7160 * # The idea is that the plt call stub loads ctr (and r11) with these
7161 * # addresses, so (r11 - res_0) gives the plt index * 4.
7162 * res_0: b PLTresolve
7163 * res_1: b PLTresolve
7164 * .
7165 * # Some number of entries towards the end can be nops
7166 * res_n_m3: nop
7167 * res_n_m2: nop
7168 * res_n_m1:
7169 *
7170 * PLTresolve:
7171 * addis 11,11,(1f-res_0)@ha
7172 * mflr 0
7173 * bcl 20,31,1f
7174 * 1: addi 11,11,(1b-res_0)@l
7175 * mflr 12
7176 * mtlr 0
7177 * sub 11,11,12 # r11 = index * 4
7178 * addis 12,12,(got+4-1b)@ha
7179 * lwz 0,(got+4-1b)@l(12) # got[1] address of dl_runtime_resolve
7180 * lwz 12,(got+8-1b)@l(12) # got[2] contains the map address
7181 * mtctr 0
7182 * add 0,11,11
7183 * add 11,0,11 # r11 = index * 12 = reloc offset.
7184 * bctr
7185 */
7187 {
7188 ADDIS_11_11,
7189 MFLR_0,
7190 BCL_20_31,
7191 ADDI_11_11,
7192 MFLR_12,
7193 MTLR_0,
7194 SUB_11_11_12,
7195 ADDIS_12_12,
7196 LWZ_0_12,
7197 LWZ_12_12,
7198 MTCTR_0,
7199 ADD_0_11_11,
7200 ADD_11_0_11,
7201 BCTR,
7202 NOP,
7203 NOP
7204 };
7207 {
7208 LIS_12,
7209 ADDIS_11_11,
7210 LWZ_0_12,
7211 ADDI_11_11,
7212 MTCTR_0,
7213 ADD_0_11_11,
7214 LWZ_12_12,
7215 ADD_11_0_11,
7216 BCTR,
7217 NOP,
7218 NOP,
7219 NOP,
7220 NOP,
7221 NOP,
7222 NOP,
7223 NOP
7224 };
7231 /* Build the branch table, one for each plt entry (less one),
7232 and perhaps some padding. */
7238 {
7241 }
7243 {
7246 }
7252 /* Last comes the PLTresolve stub. */
7254 {
7255 bfd_vma bcl;
7258 {
7261 }
7275 {
7280 }
7281 else
7282 {
7287 }
7288 }
7289 else
7290 {
7292 {
7295 }
7305 {
7310 }
7311 else
7312 {
7317 }
7318 }
7319 }
7322 }
7323 \f
7324 #define TARGET_LITTLE_SYM bfd_elf32_powerpcle_vec
7326 #define TARGET_BIG_SYM bfd_elf32_powerpc_vec
7328 #define ELF_ARCH bfd_arch_powerpc
7329 #define ELF_MACHINE_CODE EM_PPC
7330 #ifdef __QNXTARGET__
7331 #define ELF_MAXPAGESIZE 0x1000
7332 #else
7333 #define ELF_MAXPAGESIZE 0x10000
7334 #endif
7335 #define ELF_MINPAGESIZE 0x1000
7336 #define elf_info_to_howto ppc_elf_info_to_howto
7338 #ifdef EM_CYGNUS_POWERPC
7339 #define ELF_MACHINE_ALT1 EM_CYGNUS_POWERPC
7340 #endif
7342 #ifdef EM_PPC_OLD
7343 #define ELF_MACHINE_ALT2 EM_PPC_OLD
7344 #endif
7346 #define elf_backend_plt_not_loaded 1
7347 #define elf_backend_can_gc_sections 1
7348 #define elf_backend_can_refcount 1
7349 #define elf_backend_rela_normal 1
7351 #define bfd_elf32_mkobject ppc_elf_mkobject
7352 #define bfd_elf32_bfd_merge_private_bfd_data ppc_elf_merge_private_bfd_data
7353 #define bfd_elf32_bfd_relax_section ppc_elf_relax_section
7354 #define bfd_elf32_bfd_reloc_type_lookup ppc_elf_reloc_type_lookup
7355 #define bfd_elf32_bfd_set_private_flags ppc_elf_set_private_flags
7356 #define bfd_elf32_bfd_link_hash_table_create ppc_elf_link_hash_table_create
7358 #define elf_backend_object_p ppc_elf_object_p
7359 #define elf_backend_gc_mark_hook ppc_elf_gc_mark_hook
7360 #define elf_backend_gc_sweep_hook ppc_elf_gc_sweep_hook
7361 #define elf_backend_section_from_shdr ppc_elf_section_from_shdr
7362 #define elf_backend_relocate_section ppc_elf_relocate_section
7363 #define elf_backend_create_dynamic_sections ppc_elf_create_dynamic_sections
7364 #define elf_backend_check_relocs ppc_elf_check_relocs
7365 #define elf_backend_copy_indirect_symbol ppc_elf_copy_indirect_symbol
7366 #define elf_backend_adjust_dynamic_symbol ppc_elf_adjust_dynamic_symbol
7367 #define elf_backend_add_symbol_hook ppc_elf_add_symbol_hook
7368 #define elf_backend_size_dynamic_sections ppc_elf_size_dynamic_sections
7369 #define elf_backend_finish_dynamic_symbol ppc_elf_finish_dynamic_symbol
7370 #define elf_backend_finish_dynamic_sections ppc_elf_finish_dynamic_sections
7371 #define elf_backend_fake_sections ppc_elf_fake_sections
7372 #define elf_backend_additional_program_headers ppc_elf_additional_program_headers
7373 #define elf_backend_grok_prstatus ppc_elf_grok_prstatus
7374 #define elf_backend_grok_psinfo ppc_elf_grok_psinfo
7375 #define elf_backend_reloc_type_class ppc_elf_reloc_type_class
7376 #define elf_backend_begin_write_processing ppc_elf_begin_write_processing
7377 #define elf_backend_final_write_processing ppc_elf_final_write_processing
7378 #define elf_backend_write_section ppc_elf_write_section
7379 #define elf_backend_get_sec_type_attr ppc_elf_get_sec_type_attr
7380 #define elf_backend_plt_sym_val ppc_elf_plt_sym_val
7381 #define elf_backend_action_discarded ppc_elf_action_discarded
7385 /* VxWorks Target */
7387 #undef TARGET_LITTLE_SYM
7388 #undef TARGET_LITTLE_NAME
7390 #undef TARGET_BIG_SYM
7391 #define TARGET_BIG_SYM bfd_elf32_powerpc_vxworks_vec
7392 #undef TARGET_BIG_NAME
7395 /* VxWorks uses the elf default section flags for .plt. */
7398 {
7406 }
7408 /* Like ppc_elf_link_hash_table_create, but overrides
7409 appropriately for VxWorks. */
7412 {
7417 {
7424 }
7426 }
7428 /* Tweak magic VxWorks symbols as they are loaded. */
7429 static bfd_boolean
7437 {
7439 valp))
7443 }
7445 /* Tweak magic VxWorks symbols as they are written to the output file. */
7446 static bfd_boolean
7448 ATTRIBUTE_UNUSED,
7453 ATTRIBUTE_UNUSED)
7454 {
7455 /* Ignore the first dummy symbol. */
7460 }
7462 static void
7464 {
7467 }
7469 /* On VxWorks, we emit relocations against _PROCEDURE_LINKAGE_TABLE_, so
7470 define it. */
7471 #undef elf_backend_want_plt_sym
7472 #define elf_backend_want_plt_sym 1
7473 #undef elf_backend_want_got_plt
7474 #define elf_backend_want_got_plt 1
7475 #undef elf_backend_got_symbol_offset
7476 #define elf_backend_got_symbol_offset 0
7477 #undef elf_backend_plt_not_loaded
7478 #define elf_backend_plt_not_loaded 0
7479 #undef elf_backend_plt_readonly
7480 #define elf_backend_plt_readonly 1
7481 #undef elf_backend_got_header_size
7482 #define elf_backend_got_header_size 12
7484 #undef bfd_elf32_bfd_link_hash_table_create
7485 #define bfd_elf32_bfd_link_hash_table_create \
7486 ppc_elf_vxworks_link_hash_table_create
7487 #undef elf_backend_add_symbol_hook
7488 #define elf_backend_add_symbol_hook \
7489 ppc_elf_vxworks_add_symbol_hook
7490 #undef elf_backend_link_output_symbol_hook
7491 #define elf_backend_link_output_symbol_hook \
7492 elf_i386_vxworks_link_output_symbol_hook
7493 #undef elf_backend_final_write_processing
7494 #define elf_backend_final_write_processing \
7495 ppc_elf_vxworks_final_write_processing
7496 #undef elf_backend_get_sec_type_attr
7497 #define elf_backend_get_sec_type_attr \
7498 ppc_elf_vxworks_get_sec_type_attr
7499 #undef elf_backend_emit_relocs
7500 #define elf_backend_emit_relocs \
7501 elf_vxworks_emit_relocs
7503 #undef elf32_bed
7504 #define elf32_bed ppc_elf_vxworks_bed