1 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (MOD_VEX_51): Renamed to ...
8 2009-12-14 Nick Clifton <nickc@redhat.com>
11 * arm-dis.c (arm_opcodes): Specify %R in cases where using r15
12 results in unpredictable behaviour.
13 (print_insn_arm): Handle %R.
15 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
17 * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
19 (print_insn): Don't set vex.w here.
21 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
23 * i386-dis.c (print_insn): Set vex.w to 0.
25 2009-12-11 Quentin Neill <quentin.neill@amd.com>
27 * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
28 to avoid fetching ahead for the immediate bytes when OP_E_memory
29 has already been called. Fix indentation.
31 2009-12-11 Nick Clifton <nickc@redhat.com>
33 * Makefile.in: Regenerate.
34 * configure: Regenerate.
35 * arm-dis.c: Fix shadowed variable warnings.
36 * cgen-opc.c: Likewise.
37 * cr16-dis.c: Likewise.
38 * crx-dis.c: Likewise.
39 * d30v-dis.c: Likewise.
40 * fr30-dis.c: Likewise.
41 * frv-opc.c: Likewise.
42 * h8500-dis.c: Likewise.
43 * i386-dis.c: Likewise.
44 * i960-dis.c: Likewise.
45 * ia64-gen.c: Likewise.
46 * ia64-opc.c: Likewise.
47 * m32c-asm.c: Likewise.
48 * m32c-dis.c: Likewise.
49 * m68k-dis.c: Likewise.
50 * maxq-dis.c: Likewise.
51 * mcore-dis.c: Likewise.
52 * mep-asm.c: Likewise.
53 * microblaze-dis.c: Likewise.
54 * mmix-dis.c: Likewise.
55 * ns32k-dis.c: Likewise.
56 * or32-opc.c: Likewise.
57 * s390-dis.c: Likewise.
58 * sh64-dis.c: Likewise.
59 * spu-dis.c: Likewise.
60 * tic30-dis.c: Likewise.
62 2009-12-09 Nick Clifton <nickc@redhat.com>
65 * arm-dis.c (print_insn_arm): Mark insns that use the PC in
66 post-indexed addressing as unpredictable.
68 2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
70 * i386-dis.c (FXSAVE_Fixup): New.
72 (mod_table): Use FXSAVE on fxsave and fxrstor.
74 * i386-opc.tbl: Add fxsave64 and fxrstor64.
75 * i386-tbl.h: Regenerated.
77 2009-12-02 Nick Clifton <nickc@redhat.com>
78 Richard Earnshaw <rearnsha@arm.com>
81 * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
84 2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
87 * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
90 2009-11-17 Quentin Neill <quentin.neill@amd.com>
91 Sebastian Pop <sebastian.pop@amd.com>
93 * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
94 decoding the second source operand from the immediate byte.
95 (OP_EX_VexW): Pass an extra integer to identify the second
96 and third source arguments.
98 2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
100 * i386-opc.tbl: Add IsLockable to cmpxch16b.
101 * i386-tbl.h: Regenerated.
103 2009-11-19 Nick Clifton <nickc@redhat.com>
106 * arm-dis.c (print_insn_arm): Do not print an offset of zero when
107 decoding Immediaate Offset addressing.
109 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
112 * i386-dis.c (get_vex_imm8): Do not increment codep.
113 Avoid incrementing bytes_before_imm when OP_E_memory
114 has already forwarded the codep pointer.
115 (OP_EX_VexW): Increment codep to skip mod/rm byte.
117 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
119 * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
120 (VEX_LEN_XOP_08_A1): Removed.
121 (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
123 (vex_len_table): Same.
124 * i386-gen.c (CPU_CVT16_FLAGS): Removed.
125 (cpu_flags): Remove field for CpuCVT16.
126 * i386-opc.h (CpuCVT16): Removed.
127 (i386_cpu_flags): Remove bitfield cpucvt16.
128 (i386-opc.tbl): Remove CVT16 instructions.
129 * i386-init.h: Regenerated.
130 * i386-tbl.h: Regenerated.
132 2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
133 Quentin Neill <quentin.neill@amd.com>
135 * i386-dis.c (OP_Vex_2src_1): New.
136 (OP_Vex_2src_2): New.
140 (VEX_LEN_XOP_08_A0): Added.
141 (VEX_LEN_XOP_08_A1): Added.
142 (VEX_LEN_XOP_09_80): Added.
143 (VEX_LEN_XOP_09_81): Added.
144 (xop_table): Added an entry for XOP_08. Handle xop instructions.
145 (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
146 VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
147 (get_valid_dis386): Handle XOP_08.
149 * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
150 (cpu_flags): Add CpuXOP and CpuCVT16.
151 (opcode_modifiers): Add XOP08, Vex2Sources.
152 * i386-opc.h (CpuXOP): Added.
154 (i386_cpu_flags): Add cpuxop and cpucvt16.
156 (Vex2Sources): Added.
157 (i386_opcode_modifier): Add xop08, vex2sources.
158 * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
159 * i386-init.h: Regenerated.
160 * i386-tbl.h: Regenerated.
162 2009-11-17 Nick Clifton <nickc@redhat.com>
165 * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
166 instruction variants. Add pattern for MRS variant that was being
168 (arm_decode_shift): Place error message in a comment.
169 (print_insn_arm): Note that writing back to the PC is
171 Only print 'p' variants of cmp/cmn/teq/tst instructions if
172 decoding for pre-V6 architectures.
174 2009-11-17 Edward Nevill <edward.nevill@arm.com>
176 * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
178 2009-11-14 Doug Evans <dje@sebabeach.org>
180 * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
182 * Makefile.in: Regenerate.
184 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
186 * i386-dis.c (OP_E_extended): Removed.
188 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
190 * i386-dis.c (print_insn): Check rex_ignored.
192 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
194 * i386-dis.c (ckprefix): Updated to return 0 if number of
195 prefixes > 14 and record the last position for each prefix.
196 (lock_prefix): Removed.
197 (data_prefix): Likewise.
198 (addr_prefix): Likewise.
199 (repz_prefix): Likewise.
200 (repnz_prefix): Likewise.
201 (last_lock_prefix): New.
202 (last_repz_prefix): Likewise.
203 (last_repnz_prefix): Likewise.
204 (last_data_prefix): Likewise.
205 (last_addr_prefix): Likewise.
206 (last_rex_prefix): Likewise.
207 (last_seg_prefix): Likewise.
208 (MAX_CODE_LENGTH): Likewise.
209 (ADDR16_PREFIX): Likewise.
210 (ADDR32_PREFIX): Likewise.
211 (DATA16_PREFIX): Likewise.
212 (DATA32_PREFIX): Likewise.
213 (REP_PREFIX): Likewise.
214 (seg_prefix): Likewise.
215 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
216 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
217 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
218 (get_valid_dis386): Updated.
220 (OP_Monitor): Likewise.
221 (REP_Fixup): Likewise.
222 (print_insn): Display all prefixes.
223 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
224 (intel_operand_size): Likewise.
225 (OP_E_register): Likewise.
228 (OP_IMREG): Likewise.
232 (CRC32_Fixup): Likewise.
233 (MOVBE_Fixup): Likewise.
234 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
236 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
237 used_prefixes only if it is used.
239 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
241 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
242 or, sbb, sub, xor and xchg with register only operands.
243 * i386-tbl.h: Regenerated.
245 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
247 * i386-gen.c (opcode_modifiers): Add IsLockable.
249 * i386-opc.h (IsLockable): New.
250 (i386_opcode_modifier): Add islockable.
252 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
253 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
255 * i386-tbl.h: Regenerated.
257 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
259 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
260 generic coprocessor instructions for FPA loads and stores.
261 (print_insn_coprocessor): Remove %C support. Display address for
262 PC-relative offsets in %A.
264 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
266 * i386-dis.c (all_prefixes): New.
267 (ckprefix): Set all_prefixes.
268 (print_insn): Print all_prefixes instead of lock_prefix,
269 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
271 2009-11-11 Nick Clifton <nickc@redhat.com>
274 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
275 (print_insn_arm): Extend %s format control code to check for
276 unpredictable addressing modes. Add support for %S format control
277 code which suppresses this check.
278 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
279 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
280 PRE_BIT_SET): New macros.
281 (print_insn_coprocessor): Use the new macros instead of magic
283 (print_arm_address): Likewise.
284 (pirnt_insn_arm): Likewise.
285 (print_insn_thumb32): Likewise.
287 2009-11-11 Nick Clifton <nickc@redhat.com>
289 * po/id.po: Updated Indonesian translation.
291 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
293 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
295 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
297 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
298 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
299 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
301 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
304 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
305 Quentin Neill <quentin.neill@amd.com>
307 * opcodes/i386-dis.c (OP_LWPCB_E): New.
310 (USE_XOP_8F_TABLE): New.
312 (REG_XOP_LWPCB): New.
316 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
317 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
319 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
320 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
321 to access to the vex_table.
325 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
326 (cpu_flags): Add CpuLWP.
327 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
328 * opcodes/i386-opc.h (CpuLWP): New.
329 (i386_cpu_flags): Add bit cpulwp.
333 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
334 * opcodes/i386-opc.tbl (llwpcb): Added.
338 2009-11-04 DJ Delorie <dj@redhat.com>
340 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
341 (mvtcp, mvfcp, opecp): Remove.
342 * rx-decode.c: Regenerate.
343 * rx-dis.c (cpen): Remove.
345 2009-11-03 Doug Evans <dje@sebabeach.org>
347 * m32c-desc.c: Regenerate.
348 * mep-desc.c: Regenerate.
350 2009-11-02 Paul Brook <paul@codesourcery.com>
352 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
353 Add VFPv4 instructions.
355 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
357 * i386-dis.c (OP_VEX_FMA): Removed.
359 (Vex128FMA): Removed.
360 (prefix_table): First source operand of FMA4 insns is decoded
361 with Vex not with VexFMA.
362 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
363 when vex.w is set. Third source operand is decoded with
365 2009-10-27 Alan Modra <amodra@bigpond.net.au>
367 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
368 * Makefile.in: Regenerate.
369 * po/POTFILES.in: Regenerate.
371 2009-10-23 Doug Evans <dje@sebabeach.org>
373 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
374 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
375 * cgen-bitset.c: Update.
376 * fr30-desc.h: Regenerate.
377 * frv-desc.h: Regenerate.
378 * ip2k-desc.h: Regenerate.
379 * iq2000-desc.h: Regenerate.
380 * lm32-desc.h: Regenerate.
381 * m32c-desc.h: Regenerate.
382 * m32c-opc.h: Regenerate.
383 * m32r-desc.h: Regenerate.
384 * mep-desc.h: Regenerate.
385 * mt-desc.h: Regenerate.
386 * openrisc-desc.h: Regenerate.
387 * xc16x-desc.h: Regenerate.
388 * xstormy16-desc.h: Regenerate.
390 2009-10-22 DJ Delorie <dj@redhat.com>
392 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
393 * rx-decode.c: Regenerated.
395 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
398 * i386-dis.c: Document LB, LS and LV macros.
399 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
400 with the 64-bit displacement or immediate operand.
401 (putop): Handle LB, LS and LV macros.
403 2009-10-18 Doug Evans <dje@sebabeach.org>
405 * lm32-opinst.c: Regenerate.
406 * m32c-desc.c: Regenerate.
407 * m32r-opinst.c: Regenerate.
408 * openrisc-ibld.c: Regenerate.
409 * xc16x-desc.c: Regenerate.
410 * xc16x-desc.h: Regenerate.
412 2009-10-17 Doug Evans <dje@sebabeach.org>
414 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
415 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
416 sorted alphabetically.
417 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
418 stamp-* rules are sorted alphabetically.
419 * Makefile.in: Regenerate.
421 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
423 * i386-opc.h: Use enum instead of nested macros.
425 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
427 * i386-dis.c: Simplify enums.
429 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
430 Ineiev <ineiev@gmail.com>
433 * i386-dis.c: Use enum instead of nested macros.
435 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
437 * i386-dis.c (MAX_BYTEMODE): Removed.
439 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
442 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
444 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
446 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
449 2009-10-07 Michael Eager <eager@eagercon.com>
451 * microblaze-dis.c: Add include for microblaze-dis.h,
452 eliminate local extern decls.
453 * microblaze-dis.h: New.
455 2009-10-06 Nick Clifton <nickc@redhat.com>
457 * po/fi.po: Updated Finnish translation.
459 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
461 * opc2c.c: Include "libiberty.h" and <errno.h>.
462 (orig_filename): Constify.
463 (dump_lines): Fix line number directive.
464 (main): Set orig_filename to basename of input file. Use
467 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
468 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
469 instead of $(EXEEXT).
470 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
471 $(LINK_FOR_BUILD). Link with libiberty.
472 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
473 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
474 * Makefile.in: Regenerated.
475 * rx-decode.c: Regenerated.
477 2009-10-03 Paul Reed <paulreed@paddedcell.com>
479 * arm-dis.c (print_insn): Check symtab_size not *symtab.
481 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
483 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
484 * i386-tbl.h: Regenerated.
486 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
488 * ppc-dis.c (ppc_opts): Add "476" entry.
489 * ppc-opc.c (PPC476): Define.
490 (powerpc_opcodes): Update mnemonics where required for 476.
492 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
494 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
495 * ppc-dis.c (ppc_opts): Likewise.
496 Rename "ppca2" to "a2".
498 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
500 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
502 2009-09-29 DJ Delorie <dj@redhat.com>
504 * Makefile.am: Add RX files.
505 * configure.in: Add support for RX target.
506 * disassemble.c: Likewise.
507 * Makefile.in: Regenerate.
508 * configure: Regenerate.
510 * rx-decode.c: New file.
511 * rx-decode.opc: New file.
512 * rx-dis.c: New file.
514 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
516 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
517 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
519 2009-09-25 Michael Eager <eager@eagercon.com>
521 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
522 microblaze_decode_insn): Add declarations.
523 (get_delay_slots_microblaze): Remove.
525 2009-09-25 Martin Thuresson <martint@google.com>
527 Update sources to make arc and arm targets compile cleanly with
529 * arc-dis.c Fix casts.
530 * arc-ext.c: Add casts.
531 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
534 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
536 * i386-gen.c (opcode_modifiers): Remove Vex256.
537 (set_bitfield): Handle XXX=V.
539 * i386-opc.h (Vex): Update comments.
542 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
544 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
545 * i386-tbl.h: Regenerated.
547 2009-09-23 Nick Clifton <nickc@redhat.com>
549 * po/fr.po: Updated French translation.
551 2009-09-21 Ben Elliston <bje@au.ibm.com>
552 Peter Bergner <bergner@vnet.ibm.com>
554 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
555 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
556 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
557 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
559 (ERAT_T): New operand.
560 (XWC_MASK): New mask.
564 2009-09-18 Nick Clifton <nickc@redhat.com>
566 * po/es.po: Updated Spanish translation.
567 * po/vi.po: Updated Vietnamese translation.
569 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
571 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
574 2009-09-14 Nick Clifton <nickc@redhat.com>
576 * po/nl.po: Updated Dutch translation.
578 2009-09-11 Nick Clifton <nickc@redhat.com>
580 * po/opcodes.pot: Updated by the Translation project.
582 2009-09-11 Martin Thuresson <martint@google.com>
584 Updated sources to compile cleanly with -Wc++-compat:
585 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
586 * ldcref.c: Add casts.
587 * ldctor.c: Add casts.
589 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
590 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
591 * ldlang.h (enum statement_enum): Move to top level.
592 * ldmain.c: Add casts.
593 * ldwrite.c: Add casts.
594 * lexsup.c: Add casts. (enum control_enum): Move to top level.
595 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
597 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
599 * s390-dis.c (print_insn_s390): Avoid 'long long'.
601 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
603 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
604 (print_insn_s390): Signextend and shift pcrel operands before printing.
606 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
608 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
609 VEX_LEN_AE_R_X_M_0 in comments.
611 2009-09-08 DJ Delorie <dj@redhat.com>
613 * mep-opc.c: Regenerate.
615 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
617 * z8kgen.c (struct op): Replace unused flavor with id.
618 (opt): Remove extra xorb entry.
619 (func): Use id field as fallback.
620 (sub): Return new string, caller changed.
621 (internal): Allocate end marker. Assign unique id before sorting.
622 (gas): Likewise. Fix loop end condition.
623 * z8k-opc.h: Regenerate.
625 2009-09-08 Alan Modra <amodra@bigpond.net.au>
627 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
629 2009-09-07 Alan Modra <amodra@bigpond.net.au>
631 * z8kgen.c (func): Fix thinko last patch.
633 2009-09-07 Alan Modra <amodra@bigpond.net.au>
635 * z8kgen.c (func): Stabilize qsort of identically named entries.
636 * z8k-opc.h: Regenerate.
638 2009-09-07 Tristan Gingold <gingold@adacore.com>
640 * po/opcodes.pot: Regenerate.
642 2009-09-07 Alan Modra <amodra@bigpond.net.au>
644 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
645 * configure: Regenerate.
646 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
647 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
648 (i386-gen, ia64-gen, z8kgen): ..here.
649 * Makefile.in: Regenerate.
651 2009-09-07 Tristan Gingold <gingold@adacore.com>
653 * z8k-opc.h: Regenerate.
655 2009-09-05 Martin Thuresson <martin@mtme.org>
657 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
658 * m88k-dis.c (m88kdis): Rename variable class to in_class.
659 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
660 Rename argument class to symbol_class.
662 2009-09-04 Jie Zhang <jie.zhang@analog.com>
664 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
665 to the new encoding of DBGA, DBGAH, and DBGAL.
666 (_print_insn_bfin): Likewise.
668 2009-09-03 Jie Zhang <jie.zhang@analog.com>
670 * bfin-dis.c (_print_insn_bfin): Don't declare.
671 (print_insn_bfin): Don't declare.
672 (dregs_pair): Remove.
673 (ignore_bits): Remove.
676 2009-09-03 Jie Zhang <jie.zhang@analog.com>
678 * bfin-dis.c (IS_DREG): Define.
684 (decode_REGMV_0): Check illegal register move instructions.
686 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
688 * Makefile.am (BUILD_LIBINTL): New variable.
689 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
690 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
691 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
692 * Makefile.in: Regenerate.
694 2009-09-01 DJ Delorie <dj@redhat.com>
696 * mep-asm.c: Regenerate.
697 * mep-desc.c: Regenerate.
698 * mep-opc.c: Regenerate.
700 2009-09-01 Tristan Gingold <gingold@adacore.com>
702 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
703 dependencies. Remove unused FORMAT variable.
704 * configure.com: New file to create build.com DCL script for
705 Itanium VMS or Alpha VMS.
707 2009-08-29 Martin Thuresson <martin@mtme.org>
709 * cris-dis.c (bytes_to_skip): Update code to use new name.
710 * i386-dis.c (putop): Update code to use new name.
711 * i386-gen.c (process_i386_opcodes): Update code to use
713 * i386-opc.h (struct template): Rename struct template to
714 insn_template. Update code accordingly.
715 * i386-tbl.h (i386_optab): Update type to use new name.
716 * ia64-dis.c (print_insn_ia64): Rename variable template
718 * tic30-dis.c (struct instruction, get_tic30_instruction):
719 Update code to use new name.
720 * tic54x-dis.c (has_lkaddr, get_insn_size)
721 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
722 Update code to use new name.
723 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
724 Update type to new name.
725 * z8kgen.c (internal, gas): Rename variable new to new_op.
727 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
729 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
730 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
731 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
732 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
733 * Makefile.in: Regenerated.
735 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
737 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
738 [INSTALL_LIBBFD]: ... here, ...
739 [INSTALL_LIBBFD]: ... and empty overrides here.
740 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
741 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
742 * Makefile.in: Regenerate.
743 * configure: Regenerate.
745 2009-08-26 Philippe De Muyter <phdm@macqel.be>
747 * m68k-dis.c (print_insn_arg): Add movecr register names for
748 coldfire v4e families.
750 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
752 * Makefile.am (SUBDIRS): Build '.' before 'po'.
753 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
754 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
755 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
756 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
757 (i386-gen.o): New rule.
758 ($(srcdir)/i386-init.h): Adjust.
759 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
760 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
761 (ia64-gen.o): New rule.
762 (ia64_asmtab_deps): New variable.
763 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
764 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
765 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
767 (s390-opc.tab): Adjust.
768 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
770 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
771 * Makefile.in: Regenerate.
772 * z8kgen.c (gas): Avoid '/*' in comment.
773 * z8k-opc.h (func): Regenerate.
775 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
777 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
778 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
779 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
780 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
782 (LIBOPCODES_CFILES): New variable, adding to
783 TARGET_LIBOPCODES_CFILES also non-target library sources.
784 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
786 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
787 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
788 * Makefile.in: Regenerate.
789 * po/POTFILES.in: Regenerate.
791 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
793 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
794 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
795 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
796 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
797 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
798 is built shared even if it is not to be installed.
799 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
800 (install_libopcodes, uninstall_libopcodes): Remove.
801 (AM_CPPFLAGS): Renamed from ...
802 (INCLUDES): ... this.
803 * Makefile.in: Regenerate.
805 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
806 1.11, foreign, no-dist.
807 (MKDEP, m32c_opc_h): Remove variables.
808 (disassemble.lo): Rewrite using automake-style dependency
809 tracking rules; only list the dependency upon the primary source
810 file, but no included headers.
811 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
812 (i386-gen.o, ia64-gen.o): Remove dependency statements.
813 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
814 ensure all dependency fragments are included in the Makefile.
815 (s390-opc.lo): Depend on s390-opc.tab.
816 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
817 (mkdep section): Remove.
818 * Makefile.in: Regenerate.
819 * po/POTFILES.in: Regenerate.
821 * Makefile.am (install-pdf, install-html): Remove.
822 * Makefile.in: Regenerate.
824 * Makefile.in: Regenerate.
825 * aclocal.m4: Likewise.
826 * config.in: Likewise.
827 * configure: Likewise.
829 2009-08-06 Michael Eager <eager@eagercon.com>
831 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
832 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
833 * Makefile.in: Regenerate.
834 * configure.in: Add bfd_microblaze_arch target.
835 * configure: Regenerate.
836 * disassemble.c: Define ARCH_microblaze, return
837 print_insn_microblaze().
838 * microblaze-dis.c: New MicroBlaze disassembler.
839 * microblaze-opc.h: New MicroBlaze opcode definitions.
840 * microblaze-opcm.h: New MicroBlaze opcode types.
842 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
844 * configure.in: Handle bfd_l1om_arch.
845 * disassemble.c (disassembler): Likewise.
847 * configure: Regenerated.
849 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
850 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
852 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
854 (cpu_flags): Add CpuL1OM.
855 (set_bitfield): Take an argument to set the value field.
856 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
857 (process_i386_opcode_modifier): Updated.
858 (process_i386_operand_type): Likewise.
859 * i386-init.h: Regenerated.
860 * i386-tbl.h: Likewise.
862 * i386-opc.h (CpuL1OM): New.
864 (i386_cpu_flags): Add cpul1om.
866 2009-07-24 Jan Beulich <jbeulich@novell.com>
868 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
870 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
871 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
872 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
873 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
875 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
877 * i386-opc.tbl: Qualify floating point instructions by their
878 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
879 and fsincos to be avilable only on 387. Fix fstsw ax to be
880 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
882 * i386-init.h, i386-tbl.h: Regenerate.
884 2009-07-20 Nick Clifton <nickc@redhat.com>
887 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
888 offset or indexed based addressing mode 3.
890 2009-07-14 Nick Clifton <nickc@redhat.com>
893 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
895 (arm_decode_shift): Catch illegal register based shifts.
896 (print_insn_arm): Properly handle negative register r0
897 post-indexed addressing.
899 2009-07-10 Doug Kwan <dougkwan@google.com>
901 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
902 lower 32 bits of long types to make hexadecimal output consistent
903 on both 32-bit and 64-bit hosts.
905 2009-07-10 Alan Modra <amodra@bigpond.net.au>
907 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
908 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
909 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
910 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
911 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
912 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
913 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
914 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
915 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
916 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
917 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
918 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
920 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
922 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
924 2009-07-07 Nick Clifton <nickc@redhat.com>
927 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
930 2009-07-06 DJ Delorie <dj@redhat.com>
932 * mep-desc.c: Regenerate.
933 * mep-desc.h: Regenerate.
934 * mep-opc.c: Regenerate.
935 * mep-opc.h: Regenerate.
937 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
939 * i386-opc.h (CpuFMA4): Add CpuFMA4.
940 (i386_cpu_flags): New.
941 * i386-gen.c: Add CPU_FMA4_FLAGS.
942 * i386-opc.tbl: Add FMA4 instructions.
943 * i386-tbl.h: Regenerate.
944 * i386-init.h: Regenerate.
945 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
946 (OP_XMM_VexW): Ditto.
948 (VEXI4_Fixup): Ditto.
949 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
950 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
951 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
952 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
953 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
954 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
955 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
956 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
957 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
958 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
959 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
960 (get_vex_imm8): New. handle FMA4.
961 (OP_EX_VexReg): Ditto.
963 2009-06-30 Nick Clifton <nickc@redhat.com>
966 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
967 LFM and SFM instructions as comments,.
968 Improve consistency of formatting for instructions displayed as
969 comments and decimal values displayed with their hexadecimal
973 2009-06-29 Nick Clifton <nickc@redhat.com>
976 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
977 boundary between variaant and generic coprocessor instuctions.
978 (coprocessor): Use it.
979 Fix architecture version of MCRR and MRRC instructions.
980 (arm_opcdes): Fix patterns for STRB and STRH instructions.
981 (print_insn_coprocessor): Check architecture and extension masks.
982 Print a hexadecimal version of any decimal constant that is
983 outside of the range of -16 to +32.
984 (print_arm_address): Add a return value of the offset used in the
985 adress, if it is worth printing a hexadecimal version of it.
986 (print_insn_neon): Print a hexadecimal version of any decimal
987 constant that is outside of the range of -16 to +32.
988 (print_insn_arm): Likewise.
989 (print_insn_thumb16): Likewise.
990 (print_insn_thumb32): Likewise.
993 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
994 of an undefined instruction.
995 (arm_opcodes): Use it.
996 (thumb_opcod): Use it.
997 (thumb32_opc): Use it.
999 2009-06-23 DJ Delorie <dj@redhat.com>
1001 * mep-desc.c: Regenerate.
1002 * mep-desc.h: Regenerate.
1003 * mep-dis.c: Regenerate.
1004 * mep-ibld.c: Regenerate.
1005 * mep-opc.c: Regenerate.
1007 * mep-asm.c: Regenerate.
1008 * mep-opc.c: Regenerate.
1009 * mep-opc.h: Regenerate.
1011 2009-06-22 Nick Clifton <nickc@redhat.com>
1013 * po/fi.po: Updated Finish translation.
1015 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1017 * m32c-asm.c: Regenerate.
1019 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1021 * score-dis.c (print_insn_score48, print_insn_score32): Move default
1022 case label to proper lexical block.
1023 * score7-dis.c (print_insn_score32): Likewise.
1025 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
1027 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1028 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1029 * s390-opc.txt (nopr, nop): Use new instruction format.
1031 2009-06-18 Nick Clifton <nickc@redhat.com>
1034 * arm-dis.c (print_insn_coprocessor): Check that a user specified
1035 ARM architecture supports the matched instruction.
1036 (print_insn_arm): Likewise.
1037 (select_arm_features): New function. Fills in the fields of an
1038 arm_feature_set structure based on a given arm machine number.
1039 (print_insn): Initialise an arm_feature_set structure.
1041 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
1043 * vax-dis.c (is_function_entry): Return success for synthetic
1045 (is_plt_tail): New function.
1046 (print_insn_vax): Decode PLT entry offset longword.
1048 2009-06-15 Nick Clifton <nickc@redhat.com>
1051 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1055 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1057 2009-06-15 Nick Clifton <nickc@redhat.com>
1060 * arm-dis.c (print_insn): Ignore is_data if the user has requested
1061 the disassembly of data as well as instructions.
1063 2009-06-11 Doug Evans <dje@sebabeach.org>
1065 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1067 2009-06-11 Anthony Green <green@moxielogic.com>
1069 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1070 (moxie_form3_opc_info): Add branch instructions.
1071 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1072 encoded instructions.
1074 2009-06-06 Anthony Green <green@moxielogic.com>
1076 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1077 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1079 2009-06-04 Alan Modra <amodra@bigpond.net.au>
1081 * dep-in.sed: Don't use \n in replacement part of s command.
1082 * Makefile.am (DEP1): LC_ALL for uniq.
1083 * Makefile.in: Regenerate.
1085 2009-06-02 Nick Clifton <nickc@redhat.com>
1087 * po/nl.po: Updated Dutch translation.
1089 2009-06-02 Tristan Gingold <gingold@adacore.com>
1091 * ia64-gen.c (parse_resource_users, print_dependency_table,
1092 add_dis_table_ent, finish_distable, insert_bit_table_ent,
1093 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1094 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1095 insert_completer_entry, print_completer_entry, print_completer_table,
1096 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1098 2009-05-28 DJ Delorie <dj@redhat.com>
1100 * mep-asm.c: Regenerate.
1101 * mep-desc.c: Regenerate.
1103 2009-05-26 DJ Delorie <dj@redhat.com>
1105 * mep-asm.c: Regenerate.
1106 * mep-desc.c: Regenerate.
1107 * mep-desc.h: Regenerate.
1108 * mep-dis.c: Regenerate.
1109 * mep-ibld.c: Regenerate.
1110 * mep-opc.c: Regenerate.
1111 * mep-opc.h: Regenerate.
1113 2009-05-26 Nick Clifton <nickc@redhat.com>
1115 * po/id.po: Updated Indonesian translation.
1116 * po/opcodes.pot: Updated template file.
1118 2009-05-26 Alan Modra <amodra@bigpond.net.au>
1120 * dep-in.sed: Don't modify .o to .lo here. Output one filename
1121 per line with all lines having continuation backslash. Prefix
1122 first line with "A", following lines with "B".
1123 * Makefile.am (DEP): Don't use dep.sed here.
1124 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
1125 dep.sed here on dependencies, sort and uniq.
1126 * Makefile.in: Regenerate.
1128 2009-05-25 Tristan Gingold <gingold@adacore.com>
1130 * makefile.vms (OPT): New variable.
1131 (CFLAGS): Update compilation flags.
1133 2009-05-22 DJ Delorie <dj@redhat.com>
1135 * mep-asm.c: Regenerate.
1136 * mep-desc.c: Regenerate.
1137 * mep-desc.h: Regenerate.
1138 * mep-dis.c: Regenerate.
1139 * mep-ibld.c: Regenerate.
1140 * mep-opc.c: Regenerate.
1141 * mep-opc.h: Regenerate.
1143 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1145 * i386-opc.h (Cpusse5): Delete.
1146 (i386_cpu_flags): Delete.
1147 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1148 * i386-opc.tbl: Remove SSE5 instructions.
1149 * i386-tbl.h: Regenerate.
1150 * i386-init.h: Regenerate.
1151 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1152 (print_drex_arg): Delete.
1155 (OP_DREX_ICMP): Delete.
1156 (OP_DREX_FCMP): Delete.
1158 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1160 2009-05-22 Alan Modra <amodra@bigpond.net.au>
1162 * Makefile.am: Run "make dep-am".
1163 * Makefile.in: Regenerate.
1164 * po/POTFILES.in: Regenerate.
1166 2009-05-19 DJ Delorie <dj@redhat.com>
1168 * mep-asm.c: Regenerate.
1169 * mep-opc.c: Regenerate.
1171 2009-04-30 DJ Delorie <dj@redhat.com>
1173 * mep-asm.c: Regenerate.
1174 * mep-desc.c: Regenerate.
1175 * mep-desc.h: Regenerate.
1176 * mep-dis.c: Regenerate.
1177 * mep-ibld.c: Regenerate.
1178 * mep-opc.c: Regenerate.
1179 * mep-opc.h: Regenerate.
1181 2009-04-17 DJ Delorie <dj@redhat.com
1183 * mep-desc.c: Regenerate.
1184 * mep-ibld.c: Regenerate.
1185 * mep-opc.c: Regenerate.
1186 * mep-opc.h: Regenerate.
1188 2009-04-15 Anthony Green <green@moxielogic.com>
1190 * moxie-opc.c, moxie-dis.c: Created.
1191 * Makefile.am: Build the moxie source files.
1192 * configure.in: Add moxie support.
1193 * Makefile.in, configure: Rebuilt.
1194 * disassemble.c (disassembler): Add moxie support.
1195 (ARCH_moxie): Define.
1197 2009-04-15 Jan Beulich <jbeulich@novell.com>
1199 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1201 (pshab, pshaw, pshad, pshaq): Likewise.
1202 * i386-tbl.h: Re-generate.
1204 2009-04-08 DJ Delorie <dj@redhat.com
1206 * mep-asm.c: Regenerate.
1207 * mep-desc.c: Regenerate.
1208 * mep-desc.h: Regenerate.
1209 * mep-dis.c: Regenerate.
1210 * mep-ibld.c: Regenerate.
1211 * mep-opc.c: Regenerate.
1212 * mep-opc.h: Regenerate.
1214 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1216 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1217 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1218 Reorder entries so the extended mnemonics are listed before tlbilx.
1220 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1222 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1224 (print_insn_powerpc): Make sure we only deprecate instructions using
1225 the original dialect and not a modified dialect due to -Many handling.
1226 Move the handling of the condition register and default operands to
1227 the end of the if/else if/else chain.
1228 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1229 instructions from newer processors are listed before older ones.
1230 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1231 that have instructions with conflicting opcodes.
1233 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1235 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1238 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1240 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1242 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1244 * arm-dis.c (print_insn): Also check section matches in backwards
1245 search for mapping symbol.
1247 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1249 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1251 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1253 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1254 * Makefile.am: Run "make dep-am".
1255 * Makefile.in: Regenerate.
1256 * openrisc-opc.c: Regenerate.
1258 2009-03-10 Nick Clifton <nickc@redhat.com>
1260 * po/id.po: Updated Indonesian translation.
1262 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1264 * ppc-dis.c: Include "opintl.h".
1265 (struct ppc_mopt, ppc_opts): New.
1266 (ppc_parse_cpu): New function.
1267 (powerpc_init_dialect): Use it.
1268 (print_ppc_disassembler_options): Dump options from ppc_opts.
1269 Internationalize message.
1271 2009-03-06 Nick Clifton <nickc@redhat.com>
1273 * po/es.po: Updated Spanish translation.
1275 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1278 * configure.in: Test for ld --as-needed support. Link shared
1279 libopcodes against libm.
1280 * configure: Regenerate.
1282 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1284 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1285 instructions from newer processors are listed before older ones.
1287 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1289 * Makefile.am: Run "make dep-am".
1290 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1292 * Makefile.in: Regenerate.
1294 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1296 * score7-dis.c: New file.
1297 * Makefile.am: Add dependencies for score7-dis.c.
1298 * Makefile.in: Regenerate.
1299 * configure.in: Add score7-dis to score files.
1300 * configure: Regenerate.
1301 * score-dis.c: Add support for score7 architecture.
1302 * score-opc.h: Likewise.
1304 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1306 * configure: Regenerate.
1308 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1310 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1312 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1314 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1315 the power7 and the isel instructions.
1316 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1317 (insert_dm, extract_dm): Likewise.
1318 (XB6): Update comment to include XX2 form.
1319 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1320 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1321 (RemoveXX3DM): Delete.
1322 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1323 "mftgpr">: Deprecate for POWER7.
1324 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1325 "frsqrte.">: Deprecate the three operand form and enable the two
1326 operand form for POWER7 and later.
1327 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1328 <"waitsrv", "waitimpl">: Add extended opcodes.
1329 <"ldbrx", "stdbrx">: Enable for POWER7.
1330 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1331 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1332 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1333 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1334 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1335 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1336 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1337 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1338 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1339 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1340 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1341 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1342 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1343 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1344 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1345 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1346 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1347 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1348 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1349 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1350 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1351 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1352 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1353 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1354 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1355 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1356 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1357 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1358 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1359 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1360 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1361 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1362 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1363 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1364 "xxspltw", "xxswapd">: Add VSX opcodes.
1366 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1368 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1369 (operand_types): Remove Vex_Imm4.
1371 * i386-opc.h (Vex_Imm4): Removed.
1373 (i386_operand_type): Remove vex_imm4.
1375 * i386-opc.tbl: Remove Vex_Imm4 comments.
1376 * i386-init.h: Regenerated.
1377 * i386-tbl.h: Likewise.
1379 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1381 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1382 vq{r}shr{u}n.s64 insnstructions.
1384 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1386 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1387 operand to be a float point register (FRT/FRS).
1389 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1391 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1392 dmfc2 and dmtc2 before the architecture-level variants.
1394 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1396 * fr30-opc.c: Regenerate.
1397 * frv-opc.c: Regenerate.
1398 * ip2k-opc.c: Regenerate.
1399 * iq2000-opc.c: Regenerate.
1400 * lm32-opc.c: Regenerate.
1401 * m32c-opc.c: Regenerate.
1402 * m32r-opc.c: Regenerate.
1403 * mep-opc.c: Regenerate.
1404 * mt-opc.c: Regenerate.
1405 * xc16x-opc.c: Regenerate.
1406 * xstormy16-opc.c: Regenerate.
1407 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1410 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1412 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1414 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1416 * ppc-opc.c: Update copyright year.
1417 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1418 ordering for POWER4 and later and use the correct Server ordering.
1420 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1422 AVX Programming Reference (January, 2009)
1423 * i386-dis.c (PREFIX_VEX_3A44): New.
1424 (VEX_LEN_3A44_P_2): Likewise.
1425 (PREFIX_VEX_3A48): Updated.
1426 (VEX_LEN_3A4C_P_2): Likewise.
1427 (prefix_table): Add PREFIX_VEX_3A44.
1428 (vex_table): Likewise.
1429 (vex_len_table): Add VEX_LEN_3A44_P_2.
1431 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1432 * i386-tbl.h: Regenerated.
1434 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1436 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1437 (mips_arch_choices): Add XLR entry.
1438 * mips-opc.c (XLR): Define.
1439 (mips_builtin_opcodes): Add XLR instructions.
1441 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1443 * Makefile.am: Add install-pdf target.
1444 * po/Make-in: Add install-pdf target.
1445 * Makefile.in: Regenerate.
1447 2009-02-02 DJ Delorie <dj@redhat.com>
1449 * mep-asm.c: Regenerate.
1450 * mep-desc.c: Regenerate.
1451 * mep-desc.h: Regenerate.
1452 * mep-dis.c: Regenerate.
1453 * mep-ibld.c: Regenerate.
1454 * mep-opc.c: Regenerate.
1455 * mep-opc.h: Regenerate.
1457 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1459 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1462 2009-01-28 Chao-ying Fu <fu@mips.com>
1464 * mips-opc.c (suxc1): Add the flag of FP_D.
1466 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1468 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1469 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1470 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1471 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1472 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1473 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1474 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1475 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1477 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1479 * configure.in (commonbfdlib): Delete.
1480 (SHARED_LIBADD): Add pic libiberty if such is available.
1481 * configure: Regenerate.
1482 * po/POTFILES.in: Regenerate.
1484 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1486 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1487 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1488 operand form and enable the four operand form for POWER6 and later.
1489 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1490 three operand form for POWER6 and later.
1492 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1494 * bfin-dis.c (OUTS): Use "%s" as format string.
1496 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1498 * i386-gen.c (cpu_flag_init): Remove a white space.
1499 (operand_type_init): Likewise.
1501 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1503 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1504 * i386-tbl.h: Regenerated.
1506 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1508 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1509 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1510 subS, xorS and cmpS.
1512 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1514 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1515 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1516 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1517 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1520 (set_bitfield): Take an argument, lineno. Don't report lineno
1521 on error if it is -1.
1522 (process_i386_cpu_flag): Take an argument, lineno.
1523 (process_i386_opcode_modifier): Likewise.
1524 (process_i386_operand_type): Likewise.
1525 (output_i386_opcode): Likewise.
1526 (opcode_hash_entry): Add lineno.
1527 (process_i386_opcodes): Updated.
1528 (process_i386_registers): Likewise.
1529 (process_i386_initializers): Likewise.
1531 * i386-opc.h (CpuP4): Removed.
1535 (CpuSYSCALL): Likewise.
1537 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1538 cpuclflush and cpusyscall.
1540 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1542 * i386-init.h: Regenerated.
1543 * i386-tbl.h: Likewise.
1545 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1547 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1548 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1549 (cpu_flags): Add CpuRdtscp.
1550 (set_bitfield): Remove CpuSledgehammer check.
1552 * i386-opc.h (CpuRdtscp): New.
1554 (i386_cpu_flags): Add cpurdtscp.
1556 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1557 * i386-init.h: Regenerated.
1558 * i386-tbl.h: Likewise.
1560 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1562 * ppc-opc.c (PPCNONE): Define.
1564 (powerpc_opcodes): Initialize the new "deprecated" field.
1566 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1568 AVX Programming Reference (December, 2008)
1569 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1570 (VEX_LEN_E7_P_2_M_0): Likewise.
1571 (VEX_LEN_2C_P_1): Updated.
1572 (VEX_LEN_E8_P_2): Likewise.
1573 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1574 (mod_table): Likewise.
1576 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1577 * i386-tbl.h: Regenerated.
1579 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1581 * i386-gen.c (process_copyright): Update for 2009.
1583 * i386-init.h: Regenerated.
1584 * i386-tbl.h: Likewise.
1586 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1588 AVX Programming Reference (December, 2008)
1589 * i386-dis.c (OP_VEX_FMA): Removed.
1590 (OP_EX_VexW): Likewise.
1591 (OP_EX_VexImmW): Likewise.
1592 (OP_XMM_VexW): Likewise.
1593 (VEXI4_Fixup): Likewise.
1594 (VPERMIL2_Fixup): Likewise.
1597 (Vex128FMA): Likewise.
1599 (EXdVexW): Likewise.
1600 (EXqVexW): Likewise.
1601 (EXVexImmW): Likewise.
1603 (VPERMIL2): Likewise.
1604 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1605 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1606 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1607 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1608 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1609 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1610 (get_vex_imm8): Likewise.
1611 (OP_EX_VexReg): Likewise.
1612 vpermil2_op): Likewise.
1614 (vex_w_dq_mode): Likewise.
1615 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1616 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1617 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1619 (PREFIX_VEX_38DB): Likewise.
1620 (PREFIX_VEX_3A4A): Likewise.
1621 (PREFIX_VEX_3A60): Likewise.
1622 (PREFIX_VEX_3ADF): Likewise.
1623 (VEX_LEN_3ADF_P_2): Likewise.
1624 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1625 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1626 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1627 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1628 PREFIX_VEX_3896...PREFIX_VEX_389F,
1629 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1630 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1631 (vex_table): Likewise.
1632 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1633 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1634 (putop): Support "%XW".
1635 (intel_operand_size): Handle vex_w_dq_mode.
1637 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1639 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1640 instructions. Add new FMA instructions.
1641 * i386-tbl.h: Regenerated.
1643 2009-01-02 Matthias Klose <doko@ubuntu.com>
1645 * or32-opc.c (or32_print_register, or32_print_immediate,
1646 disassemble_insn): Don't rely on undefined sprintf behaviour.
1648 For older changes see ChangeLog-2008
1654 version-control: never