2 # Some generic MIPS tests
5 # When adding a new test to this file
, try to
do the following things
:
7 #
* If testing assembly and disassembly of code
, don
't forget to test
8 # the actual bit encodings of the instructions (using the
9 # --show-raw-insn flag to objdump).
11 # * Try to run the test for as many architectures as appropriate,
12 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
13 # along with the output from a call to "mips_arch_list_matching."
15 # * Be sure to compare the test output before and after your testsuite
16 # changes, to verify that existing and new tests were run as expected.
17 # Look for expect ERROR messages in the testsuite .log file to make sure
18 # the new expect code did not contain errors.
20 # To add support for a new CPU to this file, add an appropriate entry
21 # to the sequence of "mips_arch_create" function calls below, and test
22 # the result. The new CPU should automatically be used when running
23 # various tests. If the new CPU is the default CPU for any tool
24 # targets, make sure the call to "mips_arch_create" reflects that fact.
27 # "LOSE" marks information about tests which fail at a particular point
28 # in time, but which are not XFAILed. Either they used to pass
29 # and indicate either regressions or the need to tweak the tests to keep
30 # up the with code, or they are new tests and it is unknown whether or not
31 # they should pass as-is for the given object formats.
34 # The functions below create and manipulate an "architecture data
35 # array" which contains entries for each MIPS architecture (or CPU)
36 # known to these tests. The array contains the following information
37 # for each architecture, indexed by the name of the architecture
38 # described by the entry:
40 # displayname: The name of the entry to be used for pretty-printing.
42 # gprsize: The size in bits of General Purpose Registers provided by
43 # the architecture (must be 32 or 64).
45 # props: A list of text strings which are associated with the
46 # architecture. These include the architecture name as well as
47 # information about what instructions the CPU supports. When matching
48 # based on properties, an additional property is added to the normal
49 # property list, "gpr<gprsize>" so that tests can match CPUs which
50 # have GPRs of a specific size. The following properties are most
51 # useful when matching properties for generic (i.e., not CPU-specific)
54 # mips1, mips2, mips3, mips4, mips5, mips32, mips64
55 # The architecture includes the instructions defined
59 # The architecture interlocks GPRs accesses. (That is,
60 # there are no load delay slots.)
62 # mips3d The architecture includes the MIPS-3D ASE.
64 # ror The architecture includes hardware rotate instructions.
67 # The architecture provides 32- or 64-bit General Purpose
70 # as_flags: The assembler flags used when assembling tests for this
73 # objdump_flags: The objdump flags used when disassembling tests for
76 # Most entries in the architecture array will have values in all of
77 # the fields above. One entry, "default" represents the default CPU
78 # based on the target of the assembler being built. If always has
79 # empty "as_flags" and "objdump_flags."
83 # This function initializes the architecture data array ("mips_arches")
85 proc mips_arch_init {} {
88 # Catch becuase the variable won't be
set the first time through.
89 catch
{unset mips_arches
}
92 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
93 #
(optional
:) DEFAULT_FOR_TARGETS
95 # This function creates a new entry in the architecture data array
,
96 #
for the architecture or CPU named ARCH
, and fills in the entry
97 # according to the rest of the arguments.
99 # The new entry
's property list is initialized to contain ARCH, any
100 # properties specified by PROPS, and the properties associated with
101 # the entry specified by EXTENDS. (The new architecture is considered
102 # to extend the capabilities provided by that architecture.)
104 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
105 # this architecture is the default architecture. If "istarget" returns
106 # true for any of the targets in the list, a "default" entry will be
107 # added to the architecture array which indicates that ARCH is the default
109 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
110 {default_for_targets {}}} {
113 if { [info exists mips_arches($arch)] } {
114 error "mips_arch_create: arch \"$arch\" already exists"
116 if { $gprsize != 32 && $gprsize != 64 } {
117 error "mips_arch_create: invalid GPR size $gprsize"
120 set archdata(displayname) $arch
121 set archdata(gprsize) $gprsize
122 set archdata(as_flags) $as_flags
123 set archdata(objdump_flags) $objdump_flags
124 set archdata(props) $arch
125 eval lappend archdata(props) $props
126 if { [string length $extends] != 0 } {
127 eval lappend archdata(props) [mips_arch_properties $extends 0]
130 set mips_arches($arch) [array get archdata]
132 # Set as default if appropriate.
133 foreach target $default_for_targets {
134 if { [istarget $target] } {
135 if { [info exists mips_arches(default)] } {
136 error "mips_arch_create: default arch already exists"
139 set archdata(displayname) "default = $arch"
140 set archdata(as_flags) ""
141 set archdata(objdump_flags) ""
143 set mips_arches(default) [array get archdata]
151 # This function returns the list of all names of entries in the
152 # architecture data array (including the default entry, if a default
154 proc mips_arch_list_all {} {
156 return [lsort -dictionary [array names mips_arches]]
159 # mips_arch_data ARCH
161 # This function returns the information associated with ARCH
162 # in the architecture data array, in "array get" form.
163 proc mips_arch_data {arch} {
166 if { ! [info exists mips_arches($arch)] } {
167 error "mips_arch_data: unknown arch \"$arch\""
169 return $mips_arches($arch)
172 # mips_arch_displayname ARCH
174 # This function returns the printable name associated with ARCH in
175 # the architecture data array.
176 proc mips_arch_displayname {arch} {
177 array set archdata [mips_arch_data $arch]
178 return $archdata(displayname)
181 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
183 # This function returns the property list associated with ARCH in the
184 # architecture data array. If INCLUDE_GPRSIZE is non-zero, an additional
185 # "gpr32" or "gpr64" property will be returned as part of the list based
186 # on the architecture's GPR size.
187 proc mips_arch_properties
{arch
{include_gprsize
1}} {
188 array
set archdata
[mips_arch_data $arch
]
189 set props $archdata
(props
)
190 if { $include_gprsize
} {
191 lappend props gpr$archdata
(gprsize
)
196 # mips_arch_as_flags ARCH
198 # This function returns the assembler flags associated with ARCH in
199 # the architecture data array.
200 proc mips_arch_as_flags
{arch
} {
201 array
set archdata
[mips_arch_data $arch
]
202 return $archdata
(as_flags
)
205 # mips_arch_objdump_flags ARCH
207 # This function returns the objdump disassembly flags associated with
208 # ARCH in the architecture data array.
209 proc mips_arch_objdump_flags
{arch
} {
210 array
set archdata
[mips_arch_data $arch
]
211 return $archdata
(objdump_flags
)
214 # mips_arch_matches ARCH PROPMATCHLIST
216 # This function returns non
-zero
if ARCH matches the
set of properties
217 # described by PROPMATCHLIST. Each entry in PROPMATCHLIST can either
218 # be the
name of a
property which must be matched
, or
"!" followed by
219 # the
name of a
property which must not be matched. ARCH matches
220 # PROPMATCHLIST
if and only
if all of the conditions specified by
221 # PROPMATCHLIST are satisfied.
222 proc mips_arch_matches
{arch propmatchlist
} {
223 foreach pm $propmatchlist
{
224 if { [string match
{!*} $pm
] } {
227 set p
[string range $pm
1 end
]
229 # fail
if not present.
234 set loc
[lsearch
-exact
[mips_arch_properties $arch
] $p
]
236 # required
-absent and found
, or required
-present and not found
: fail.
237 if { ($inverted
&& $loc
!= -1) ||
(! $inverted
&& $loc
== -1) } {
244 # mips_arch_list_matching
ARGS
246 # This function returns a list of all architectures which match
247 # the conditions described by its arguments. Its arguments are
248 # taken as a list and used as the PROPMATCHLIST in a
call to
249 #
"mips_arch_matches" for each known architecture.
250 proc mips_arch_list_matching
{args} {
252 foreach arch
[mips_arch_list_all
] {
253 #
For now
, don
't match default arch until we know what its
254 # properties actually are.
255 if { [string compare $arch default] == 0
256 && [string length [mips_arch_properties default]] == 0} {
259 if { [mips_arch_matches $arch $args] } {
267 # The functions below facilitate running various types of tests.
269 # run_dump_test_arch NAME ARCH
271 # Invoke "run_dump_test" for test NAME, with extra assembler and
272 # disassembler flags to test architecture ARCH.
273 proc run_dump_test_arch { name arch } {
276 if [catch {run_dump_test $name \
277 "{name {([mips_arch_displayname $arch])}}
278 {objdump {[mips_arch_objdump_flags $arch]}}
279 {as {[mips_arch_as_flags $arch]}}"} rv] {
281 untested "$subdir/$name ($arch)"
285 # run_dump_test_arches NAME ARCH_LIST
287 # Invoke "run_dump_test_arch" for test NAME, for each architecture
288 # listed in ARCH_LIST.
289 proc run_dump_test_arches { name arch_list } {
290 foreach arch $arch_list {
291 run_dump_test_arch "$name" "$arch"
295 # run_list_test NAME OPTS (optional): TESTNAME
297 # Assemble the file "NAME.d" and compare the assembler standard error
298 # output against the regular expressions given in the file "NAME.l".
299 # The assembler is passed the flags given in OPTS. If TESTNAME is
300 # provided, it will be used as the name of the test.
301 proc run_list_test { name opts {testname {}} } {
303 if { [string length $testname] == 0 } then {
304 set testname "MIPS $name"
306 set file $srcdir/$subdir/$name
307 gas_run ${name}.s $opts ">&dump.out"
308 if { [regexp_diff "dump.out" "${file}.l"] } then {
310 verbose "output is [file_contents "dump.out"]" 2
316 # run_list_test_arch NAME OPTS ARCH
318 # Invoke "run_list_test" for test NAME with options OPTS, with extra
319 # assembler flags to test architecture ARCH.
320 proc run_list_test_arch { name opts arch } {
323 set testname "MIPS $name ([mips_arch_displayname $arch])"
324 if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \
331 # run_list_test_arches NAME OPTS ARCH_LIST
333 # Invoke "run_list_test_arch" for test NAME with options OPTS, for each
334 # architecture listed in ARCH_LIST.
335 proc run_list_test_arches { name opts arch_list } {
336 foreach arch $arch_list {
337 run_list_test_arch "$name" "$opts" "$arch"
342 # Create the architecture data array by providing data for all
343 # known architectures.
345 # Note that several targets pick default CPU based on ABI. We
346 # can't easily handle that
; do NOT list those targets as defaulting
347 # to
any architecture.
349 mips_arch_create mips1
32 {} {} \
350 { -march
=mips1
-mtune
=mips1
} { -mmips
:3000 }
351 mips_arch_create mips2
32 mips1
{ gpr_ilocks
} \
352 { -march
=mips2
-mtune
=mips2
} { -mmips
:6000 }
353 mips_arch_create mips3
64 mips2
{} \
354 { -march
=mips3
-mtune
=mips3
} { -mmips
:4000 }
355 mips_arch_create mips4
64 mips3
{} \
356 { -march
=mips4
-mtune
=mips4
} { -mmips
:8000 }
357 mips_arch_create mips5
64 mips4
{} \
358 { -march
=mips5
-mtune
=mips5
} { -mmips
:mips5
}
359 mips_arch_create mips32
32 mips2
{} \
360 { -march
=mips32
-mtune
=mips32
} { -mmips
:isa32
} \
361 { mipsisa32
-*-* mipsisa32el
-*-* }
362 mips_arch_create mips32r2
32 mips32
{ ror
} \
363 { -march
=mips32r2
-mtune
=mips32r2
} \
365 { mipsisa32r2
-*-* mipsisa32r2el
-*-* }
366 mips_arch_create mips64
64 mips5
{ mips32
} \
367 { -march
=mips64
-mtune
=mips64
} { -mmips
:isa64
} \
368 { mipsisa64
-*-* mipsisa64el
-*-* }
369 mips_arch_create mips64r2
64 mips64
{ mips32r2 ror
} \
370 { -march
=mips64r2
-mtune
=mips64r2
} \
372 { mipsisa64r2
-*-* mipsisa64r2el
-*-* }
373 mips_arch_create r3000
32 mips1
{} \
374 { -march
=r3000
-mtune
=r3000
} { -mmips
:3000 }
375 mips_arch_create r3900
32 mips1
{ gpr_ilocks
} \
376 { -march
=r3900
-mtune
=r3900
} { -mmips
:3900 } \
377 { mipstx39
-*-* mipstx39el
-*-* }
378 mips_arch_create r4000
64 mips3
{} \
379 { -march
=r4000
-mtune
=r4000
} { -mmips
:4000 }
380 mips_arch_create vr5400
64 mips4
{ ror
} \
381 { -march
=vr5400
-mtune
=vr5400
} { -mmips
:5400 }
382 mips_arch_create sb1
64 mips64
{ mips3d
} \
383 { -march
=sb1
-mtune
=sb1
} { -mmips
:sb1
} \
384 { mipsisa64sb1
-*-* mipsisa64sb1el
-*-* }
387 # And now begin the actual tests
! VxWorks uses RELA rather than REL
388 # relocations
, so most of the generic dump tests will not work there.
390 if { [istarget mips
*-*-vxworks
*] } {
391 run_dump_test
"vxworks1"
392 run_dump_test
"vxworks1-xgot"
393 run_dump_test
"vxworks1-el"
394 run_dump_test
"vxworks1-xgot-el"
395 } elseif
{ [istarget mips
*-*-*] } {
397 set elf
[expr
[istarget
*-*-elf
*] ||
[istarget
*-*-irix5
*] ||
[istarget
*-*-irix6
* ] ||
[istarget
*-*-linux
*] ||
[istarget
*-*-netbsd
*] ]
398 set ecoff
[expr
[istarget
*-*-ecoff
*] ||
[istarget
*-*-ultrix
*] ||
[istarget
*-*-irix\
[1-4\
]*] ]
399 set aout
[expr
[istarget
*-*-bsd
*] ||
[istarget
*-*-openbsd
*] ]
400 set ilocks
[istarget mipstx39
*-*-*]
401 set gpr_ilocks
[expr
[istarget mipstx39
*-*-*]]
402 set addr32
[expr
[istarget mipstx39
*-*-*] ||
[istarget mips
-*-linux
*] ||
[istarget mipsel
-*-linux
*]]
403 set has_newabi
[expr
[istarget
*-*-irix6
*] ||
[istarget mips64
*-*-linux
*]]
405 if { [istarget
"mips*-*-*linux*"] } then {
410 if [istarget mips
*el
-*-*] {
416 run_dump_test_arches
"abs" [mips_arch_list_matching mips1]
417 run_dump_test_arches
"add" [mips_arch_list_matching mips1]
418 run_dump_test_arches
"and" [mips_arch_list_matching mips1]
419 run_dump_test
"break20"
420 run_dump_test
"trap20"
422 # LOSE
: As of
2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
423 # See http
://sources.redhat.com
/ml
/binutils
/2001-10/msg00418.html
for
424 # more information. Not sure
if the fixes there are correct
; should
425 # branches to external labels be allowed
for ECOFF?
426 # XXX FIXME
: the following tests require
-mips2 disasm
for
427 # branch
-likely instructions. They should be split.
428 run_dump_test_arches
"beq" [mips_arch_list_matching mips2]
429 run_dump_test_arches
"bge" [mips_arch_list_matching mips2]
430 run_dump_test_arches
"bgeu" [mips_arch_list_matching mips2]
431 run_dump_test_arches
"blt" [mips_arch_list_matching mips2]
432 run_dump_test_arches
"bltu" [mips_arch_list_matching mips2]
433 run_dump_test_arches
"branch-misc-1" [mips_arch_list_matching mips1]
434 run_dump_test_arches
"branch-misc-2" [mips_arch_list_matching mips1]
435 run_dump_test_arches
"branch-misc-2pic" [mips_arch_list_matching mips1]
436 run_dump_test_arches
"branch-misc-2-64" [mips_arch_list_matching mips3]
437 run_dump_test_arches
"branch-misc-2pic-64" [mips_arch_list_matching mips3]
438 run_dump_test
"branch-misc-3"
439 run_dump_test
"branch-swap"
442 run_dump_test
"div-ilocks"
447 run_dump_test_arches
"dli" [mips_arch_list_matching mips3]
450 run_dump_test_arches
"elf-jal" [mips_arch_list_matching mips1]
454 if $elf
{ run_dump_test
"jal-svr4pic" }
455 if $elf
{ run_dump_test
"jal-xgot" }
456 run_list_test_arches
"jal-range" "-32" [mips_arch_list_matching mips1]
457 if $has_newabi
{ run_dump_test
"jal-newabi" }
458 if !$aout
{ run_dump_test
"la" }
459 if $elf
{ run_dump_test
"la-svr4pic" }
460 if $elf
{ run_dump_test
"la-xgot" }
461 if $elf
{ run_dump_test
"lca-svr4pic" }
462 if $elf
{ run_dump_test
"lca-xgot" }
464 # XXX FIXME
: Has mips2 and later insns with mips1 disassemblies.
465 #
(Should split and
then use appropriate arch lists.
)
466 run_dump_test_arches
"lb" [mips_arch_list_matching !mips2]
469 run_dump_test_arches
"lb-svr4pic" [mips_arch_list_matching !gpr_ilocks]
470 run_dump_test_arches
"lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
473 # Both versions specify the cpu
, so we can run both regardless of
474 # the interlocking in the configured default cpu.
475 run_dump_test
"lb-xgot"
476 run_dump_test
"lb-xgot-ilocks"
483 run_dump_test
"ld-ilocks"
485 run_dump_test
"ld-ilocks-addr32"
489 if $elf
{ run_dump_test
"ld-svr4pic" }
490 if $elf
{ run_dump_test
"ld-xgot" }
491 run_dump_test_arches
"li" [mips_arch_list_matching mips1]
492 if !$aout
{ run_dump_test
"lifloat" }
493 if $elf
{ run_dump_test
"lif-svr4pic" }
494 if $elf
{ run_dump_test
"lif-xgot" }
495 run_dump_test_arches
"mips4" [mips_arch_list_matching mips4]
496 run_dump_test_arches
"mips5" [mips_arch_list_matching mips5]
498 run_dump_test
"mul-ilocks"
503 run_dump_test_arches
"rol" [mips_arch_list_matching !ror]
504 run_dump_test_arches
"rol-hw" [mips_arch_list_matching ror]
506 run_dump_test_arches
"rol64" [mips_arch_list_matching gpr64 !ror]
507 run_dump_test_arches
"rol64-hw" [mips_arch_list_matching gpr64 ror]
509 if !$aout
{ run_dump_test
"sb" }
510 run_dump_test
"trunc"
511 if !$aout
{ run_dump_test
"ulh" }
512 run_dump_test_arches
"ulh2-eb" [mips_arch_list_matching mips1]
513 run_dump_test_arches
"ulh2-el" [mips_arch_list_matching mips1]
514 if $elf
{ run_dump_test
"ulh-svr4pic" }
515 if $elf
{ run_dump_test
"ulh-xgot" }
523 run_dump_test_arches
"ulw2-eb" [mips_arch_list_matching !gpr_ilocks]
524 run_dump_test_arches
"ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
525 run_dump_test_arches
"ulw2-el" [mips_arch_list_matching !gpr_ilocks]
526 run_dump_test_arches
"ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
528 run_dump_test_arches
"uld2-eb" [mips_arch_list_matching mips3]
529 run_dump_test_arches
"uld2-el" [mips_arch_list_matching mips3]
531 # The mips16 test can only be run
on ELF
, because only ELF
532 # supports the necessary mips16 reloc.
533 if { $elf
&& !$no_mips16
} {
534 run_dump_test
"mips16"
535 run_dump_test
"mips16-64"
536 # Check MIPS16e extensions
537 run_dump_test_arches
"mips16e" [mips_arch_list_matching mips32]
538 # Check jalx handling
539 run_dump_test
"mips16-jalx"
540 run_dump_test
"mips-jalx"
541 # Check MIPS16 HI16
/LO16 relocations
542 run_dump_test
"mips16-hilo"
544 run_dump_test
"mips16-hilo-n32"
547 run_list_test
"mips-no-jalx" "-32"
548 run_dump_test
"delay"
549 run_dump_test
"nodelay"
550 run_dump_test
"mips4010"
551 run_dump_test
"mips4650"
552 run_dump_test
"mips4100"
553 run_dump_test
"vr4111"
554 run_dump_test
"vr4120"
555 run_dump_test
"vr4120-2"
556 run_dump_test
"vr4130"
557 run_dump_test
"vr5400"
558 run_dump_test
"vr5500"
559 run_dump_test
"rm7000"
560 run_dump_test
"perfcount"
561 run_dump_test
"lineno"
564 run_dump_test_arches
"mips32" [mips_arch_list_matching mips32]
566 run_dump_test_arches
"mips32-sf32" [mips_arch_list_matching mips32]
568 run_dump_test_arches
"mips32r2" [mips_arch_list_matching mips32r2]
569 run_list_test_arches
"mips32r2-ill" "-32" \
570 [mips_arch_list_matching mips32r2 gpr32
]
571 run_list_test_arches
"mips32r2-ill-fp64" "-mabi=o64" \
572 [mips_arch_list_matching mips32r2 gpr64
]
574 run_dump_test_arches
"mips64" [mips_arch_list_matching mips64]
576 run_dump_test_arches
"mips64r2" [mips_arch_list_matching mips64r2]
577 run_list_test_arches
"mips64r2-ill" "" [mips_arch_list_matching mips64r2]
579 run_dump_test
"set-arch"
582 run_dump_test
"mips64-mips3d"
583 run_dump_test_arches
"mips64-mips3d-incl" [mips_arch_list_matching mips3d]
585 run_dump_test
"mips64-mdmx"
586 run_dump_test
"sb1-ext-mdmx"
587 run_dump_test
"sb1-ext-ps"
590 run_dump_test
"relax"
591 run_dump_test
"relax-swap1-mips1"
592 run_dump_test
"relax-swap1-mips2"
593 run_dump_test
"relax-swap2"
595 run_list_test
"illegal" "-32"
596 run_list_test
"baddata1" "-32"
598 # LOSE
: As of
2002-02-08, the next
4 tests fail
for target mips
-ecoff.
599 # It
's unknown whether they _should_ pass as-is, or whether different
600 # variants are needed for ELF and ECOFF.
601 run_dump_test "mips-gp32-fp32"
602 run_dump_test "mips-gp32-fp64"
603 run_dump_test "mips-gp64-fp32"
604 run_dump_test "mips-gp64-fp64"
607 # Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file
608 # containing 4650-specific instructions with -m4650 and -mcpu=4650,
609 # and verify that they're the same. Specifically
, we
're checking
610 # that the EF_MIPS_MACH field is set, and that the 4650 'mul
'
611 # instruction does get used. In previous versions of GAS,
612 # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
613 run_dump_test
"elf_e_flags1"
614 run_dump_test
"elf_e_flags2"
615 run_dump_test
"elf_e_flags3"
616 run_dump_test
"elf_e_flags4"
618 # Check EF_MIPS_ARCH markings
for each supported architecture.
619 run_dump_test
"elf_arch_mips1"
620 run_dump_test
"elf_arch_mips2"
621 run_dump_test
"elf_arch_mips3"
622 run_dump_test
"elf_arch_mips4"
623 run_dump_test
"elf_arch_mips5"
624 run_dump_test
"elf_arch_mips32"
625 run_dump_test
"elf_arch_mips32r2"
626 run_dump_test
"elf_arch_mips64"
627 run_dump_test
"elf_arch_mips64r2"
629 # Verify that ASE markings are handled properly.
630 if { !$no_mips16
} { run_dump_test
"elf_ase_mips16" }
632 run_dump_test
"mips-gp32-fp32-pic"
633 run_dump_test
"mips-gp32-fp64-pic"
634 run_dump_test
"mips-gp64-fp32-pic"
635 run_dump_test
"mips-gp64-fp64-pic"
637 run_dump_test
"mips-abi32"
638 run_dump_test
"mips-abi32-pic"
639 run_dump_test
"mips-abi32-pic2"
641 run_dump_test
"elf${el}-rel"
642 run_dump_test_arches
"elf${el}-rel2" [mips_arch_list_matching gpr64]
643 run_dump_test
"e32${el}-rel2"
644 run_dump_test
"elf${el}-rel3"
645 run_dump_test_arches
"elf-rel4" [mips_arch_list_matching gpr64]
646 run_dump_test
"e32-rel4"
647 run_dump_test
"elf-rel5"
648 run_dump_test
"elf-rel6"
650 run_dump_test
"elf-rel6-n32"
651 run_dump_test
"elf-rel6-n64"
653 run_dump_test
"elf-rel7"
654 run_dump_test
"elf-rel8"
655 run_dump_test
"elf-rel9"
657 run_dump_test
"elf-rel10"
658 run_dump_test
"elf-rel11"
660 run_dump_test
"elf-rel12"
661 run_dump_test
"elf-rel13"
662 run_dump_test
"elf-rel14"
665 run_dump_test
"elf-rel15"
666 run_dump_test
"elf-rel16"
668 run_dump_test
"elf-rel-got-n32"
669 run_dump_test
"elf-rel-xgot-n32"
670 run_dump_test
"elf-rel-got-n64"
671 run_dump_test
"elf-rel-xgot-n64"
673 run_dump_test
"elf-rel17"
675 run_dump_test
"elf-rel18"
677 run_dump_test
"elf-rel19"
678 run_dump_test
"elf-rel20"
680 run_dump_test
"elf-rel21"
681 run_dump_test
"elf-rel22"
682 run_dump_test
"elf-rel23"
683 run_dump_test
"elf-rel23a"
684 run_dump_test
"elf-rel23b"
685 run_dump_test
"elf-rel24"
688 run_dump_test
"elf-rel25"
689 run_dump_test
"elf-rel25a"
692 run_dump_test
"${tmips}mips${el}16-e"
693 run_dump_test
"${tmips}mips${el}16-f"
695 run_dump_test
"elf-consthilo"
696 run_dump_test
"expr1"
698 run_list_test
"tls-ill" "-32"
699 run_dump_test
"tls-o32"
703 run_dump_test
"n32-consec"
706 # tests of objdump
's ability to disassemble using different
708 run_dump_test "gpr-names-numeric"
709 run_dump_test "gpr-names-32"
710 run_dump_test "gpr-names-n32"
711 run_dump_test "gpr-names-64"
713 run_dump_test "fpr-names-numeric"
714 run_dump_test "fpr-names-32"
715 run_dump_test "fpr-names-n32"
716 run_dump_test "fpr-names-64"
718 run_dump_test "cp0-names-numeric"
719 run_dump_test "cp0-names-mips32"
720 run_dump_test "cp0-names-mips32r2"
721 run_dump_test "cp0-names-mips64"
722 run_dump_test "cp0-names-mips64r2"
723 run_dump_test "cp0-names-sb1"
725 run_dump_test "cp0sel-names-numeric"
726 run_dump_test "cp0sel-names-mips32"
727 run_dump_test "cp0sel-names-mips32r2"
728 run_dump_test "cp0sel-names-mips64"
729 run_dump_test "cp0sel-names-mips64r2"
730 run_dump_test "cp0sel-names-sb1"
732 run_dump_test "hwr-names-numeric"
733 run_dump_test "hwr-names-mips32r2"
734 run_dump_test "hwr-names-mips64r2"
736 run_dump_test "ldstla-32"
737 run_dump_test "ldstla-32-mips3"
738 run_dump_test "ldstla-32-shared"
739 run_dump_test "ldstla-32-mips3-shared"
740 run_list_test "ldstla-32-1" "-mabi=32" \
741 "MIPS ld-st-la bad constants (ABI o32)"
742 run_list_test "ldstla-32-mips3-1" "-mabi=32" \
743 "MIPS ld-st-la bad constants (ABI o32, mips3)"
744 run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
745 "MIPS ld-st-la bad constants (ABI o32, shared)"
746 run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
747 "MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
748 run_dump_test "ldstla-eabi64"
750 run_dump_test "ldstla-n64"
751 run_dump_test "ldstla-n64-shared"
752 run_dump_test "ldstla-n64-sym32"
755 run_dump_test "macro-warn-1"
756 run_dump_test "macro-warn-2"
757 run_dump_test "macro-warn-3"
758 run_dump_test "macro-warn-4"
760 run_dump_test "macro-warn-1-n32"
761 run_dump_test "macro-warn-2-n32"
764 run_dump_test "noat-1"
765 run_list_test "noat-2" ""
766 run_list_test "noat-3" ""
767 run_list_test "noat-4" ""
768 run_list_test "noat-5" ""
769 run_list_test "noat-6" ""
770 run_list_test "noat-7" ""
772 run_dump_test_arches "smartmips" [mips_arch_list_matching mips32 !gpr64]
773 run_dump_test_arches "mips32-dsp" [mips_arch_list_matching mips32r2]
774 run_dump_test_arches "mips64-dsp" [mips_arch_list_matching mips64r2]
775 run_dump_test_arches "mips32-mt" [mips_arch_list_matching mips32r2 !gpr64]
777 if { $elf && !$no_mips16 } {
778 run_dump_test "mips16-dwarf2"
780 run_dump_test "mips16-dwarf2-n32"
784 run_dump_test "mips16e-jrc"
785 run_dump_test "mips16e-save"
786 run_dump_test "mips16e-64"
787 run_list_test "mips16e-64" "-march=mips32 -32"
789 run_dump_test "vxworks1"
790 run_dump_test "vxworks1-xgot"
791 run_dump_test "vxworks1-el"
792 run_dump_test "vxworks1-xgot-el"
794 run_dump_test "noreorder"