| blob | f2f9adbe52295e1639262a7daa78ffc9a429994f |
1 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
3 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
4 name of the libtool directory.
5 * Makefile.in: Rebuild.
7 2000-02-24 Nick Clifton <nickc@cygnus.com>
9 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
10 (cgen_clear_signed_overflow_ok): New function.
11 (cgen_signed_overflow_ok_p): New function.
13 2000-02-23 Andrew Haley <aph@cygnus.com>
15 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
16 m32r-ibld.c,m32r-opc.h: Rebuild.
18 2000-02-23 Linas Vepstas <linas@linas.org>
20 * i370-dis.c, i370-opc.c: New.
22 * disassemble.c (ARCH_i370): Define.
23 (disassembler): Handle it.
25 * Makefile.am: Add support for Linux/IBM 370.
26 * configure.in: Likewise.
28 * Makefile.in: Regenerate.
29 * configure: Likewise.
31 2000-02-22 Chandra Chavva <cchavva@cygnus.com>
33 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
34 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
35 procedure.
37 1999-12-30 Andrew Haley <aph@cygnus.com>
39 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
40 force gp32 to zero.
41 * mips-opc.c (G6): New define.
42 (mips_builtin_op): Add "move" definition for -gp32.
44 2000-02-22 Ian Lance Taylor <ian@zembu.com>
46 From Grant Erickson <gerickso@Brocade.COM>:
47 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
49 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
51 * dis-buf.c (buffer_read_memory): Change `length' param and all int
52 vars to unsigned.
54 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
56 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
57 (print_insn_ppi): Likewise.
58 (print_insn_shx): Use info->mach to select appropriate insn set.
59 Add support for sh-dsp. Remove FD_REG_N support.
60 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
61 (sh_arg_type): Likewise. Remove FD_REG_N.
62 (sh_dsp_reg_nums): New enum.
63 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
64 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
65 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
66 (arch_sh3_dsp_up): Likewise.
67 (sh_opcode_info): New field: arch.
68 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
69 D_REG_N. Fill in arch field. Add sh-dsp insns.
71 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
73 * arm-dis.c: Change flavor name from atpcs-special to
74 special-atpcs to prevent name conflict in gdb.
75 (get_arm_regname_num_options, set_arm_regname_option,
76 get_arm_regnames): New functions. API to access the several
77 flavor of register names. Note: Used by gdb.
78 (print_insn_thumb): Use the register name entry from the currently
79 selected flavor for LR and PC.
81 2000-02-10 Nick Clifton <nickc@cygnus.com>
83 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
84 classes.
85 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
86 "mulsh.h" instructions.
87 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
88 classes.
89 (print_insn_mcore): Add support for little endian targets.
90 Add support for MULSH and OPSR classes.
92 2000-02-07 Nick Clifton <nickc@cygnus.com>
94 * arm-dis.c (parse_arm_diassembler_option): Rename again.
95 Previous delat did not take.
97 2000-02-03 Timothy Wall <twall@redhat.com>
99 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
100 to adjust target address bounds checking and calculate the
101 appropriate octet offset into data.
103 2000-01-27 Nick Clifton <nickc@redhat.com>
105 * arm-dis.c: (parse_disassembler_option): Rename to
106 parse_arm_disassembler_option and allow to be exported.
108 * disassemble.c (disassembler_usage): New function: Print out any
109 target specific disassembler options.
110 Call arm_disassembler_options() if the ARM architecture is being
111 supported.
113 * arm-dis.c (NUM_ELEM): Define this macro if not already
114 defined.
115 (arm_regname): New struct type for ARM register names.
116 (arm_toggle_regnames): Delete.
117 (parse_disassembler_option): Use register name structure.
118 (print_insn): New function: Combines duplicate code found in
119 print_insn_big_arm and print_insn_little_arm.
120 (print_insn_big_arm): Call print_insn.
121 (print_insn_little_arm): Call print_insn.
122 (print_arm_disassembler_options): Display list of supported,
123 ARM specific disassembler options.
125 2000-01-27 Thomas de Lellis <tdel@windriver.com>
127 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
128 ARM_STT_16BIT flag as Thumb code symbols.
130 * arm-dis.c (printf_insn_little_arm): Ditto.
132 2000-01-25 Thomas de Lellis <tdel@windriver.com>
134 * arm-dis.c (printf_insn_thumb): Prevent double dumping
135 of raw thumb instructions.
137 2000-01-20 Nick Clifton <nickc@cygnus.com>
139 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
141 2000-01-03 Nick Clifton <nickc@cygnus.com>
143 * arm-dis.c (streq): New macro.
144 (strneq): New macro.
145 (force_thumb): ew local variable.
146 (parse_disassembler_option): New function: Parse a single, ARM
147 specific disassembler command line switch.
148 (parse_disassembler_option): Call parse_disassembler_option to
149 parse individual command line switches.
150 (print_insn_big_arm): Check force_thumb.
151 (print_insn_little_arm): Check force_thumb.
153 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
155 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
157 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
159 * m10300-opc.c, m10300-dis.c: Add am33 support.
161 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
163 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
164 (print_insn_hppa): Handle 'B' operand.
166 1999-11-22 Nick Clifton <nickc@cygnus.com>
168 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
170 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
172 * mips-opc.c (I5): New.
173 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
174 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
175 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
177 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
179 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
180 * arm-opc.h (print_insn_arm): Added comment documenting
181 the 'X' format just added to arm-dis.c.
183 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
185 * mips-opc.c (la): Create a version that just uses addiu directly.
186 (dla): Expand to daddiu if possible.
188 1999-11-11 Nick Clifton <nickc@cygnus.com>
190 * mips-opc.c: Add ssnop pattern.
192 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
194 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
196 1999-10-29 Nick Clifton <nickc@cygnus.com>
198 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
199 (d30v_format_tab): Define the SHORT_AR format.
201 1999-10-28 Nick Clifton <nickc@cygnus.com>
203 * mcore-dis.c: Remove spurious code introduced in previous delta.
205 1999-10-27 Scott Bambrough <scottb@netwinder.org>
207 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
209 1999-10-18 Michael Meissner <meissner@cygnus.com>
211 * alpha-opc.c (alpha_operands): Fill in missing initializer.
212 (alpha_num_operands): Convert to unsigned.
213 (alpha_num_opcodes): Ditto.
214 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
215 (insert_rca): Ditto.
216 (insert_za): Ditto.
217 (insert_zb): Ditto.
218 (insert_zc): Ditto.
219 (extract_bdisp): Ditto.
220 (extract_jhint): Ditto.
221 (extract_ev6hwjhint): Ditto.
223 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
225 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
226 'co', '@'.
228 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
230 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
232 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
234 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
235 rac/rachi instructions.
236 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
237 slae, st and st2w.
239 1999-10-04 Doug Evans <devans@casey.cygnus.com>
241 * fr30-asm.c,fr30-desc.h: Rebuild.
242 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
243 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
245 1999-09-29 Nick Clifton <nickc@cygnus.com>
247 * sh-opc.h: Fix bit patterns for several load and store
248 instructions.
250 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
252 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
253 cleaner code using completer prefixes. Add 'Y'.
255 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
257 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
259 * hppa-dis.c (extract_22): New function.
261 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
263 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
265 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
267 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
269 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
271 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
273 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
275 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
277 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
279 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
281 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
283 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
284 operand.
286 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
288 * hppa-dis.c: (print_insn_hppa): Add missing break after
289 FP register case.
291 * hppa-dis.c: Finish constifying various completers, register
292 names, etc etc.
294 1999-09-14 Michael Meissner <meissner@cygnus.com>
296 * configure.in (Canonicalization of target names): Remove adding
297 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
298 generates $ac_config_sub with a ${CONFIG_SHELL} already.
299 * configure: Regenerate.
301 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
303 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
305 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
307 1999-09-07 Nick Clifton <nickc@cygnus.com>
309 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
310 names for the mulu and muls patterns.
312 1999-09-04 Steve Chamberlain <sac@pobox.com>
314 * pj-opc.c: New file.
315 * pj-dis.c: New file.
316 * disassemble.c (disassembler): Handle bfd_arch_pj.
317 * configure.in: Handle bfd_pj_arch.
318 * Makefile.am: Rebuild dependencies.
319 (CFILES): Add pj-dis.c and pj-opc.c.
320 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
321 * configure, Makefile.in: Rebuild.
323 1999-09-04 H.J. Lu <hjl@gnu.org>
325 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
327 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
329 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
331 1999-08-04 Doug Evans <devans@casey.cygnus.com>
333 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
334 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
335 * m32r-opinst.c: Rebuild.
337 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
339 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
340 register args by 'f'.
342 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
344 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
345 extract_10U_store): New.
346 (print_insn_hppa): Add new completers.
348 * hppa-dis.c (signed_unsigned_names,mix_half_names,
349 saturation_names): New.
350 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
352 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
354 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
356 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
357 to decide to print a space.
359 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
361 * i386-dis.c: Add AMD athlon instruction support.
363 1999-08-10 Ian Lance Taylor <ian@zembu.com>
365 From Wally Iimura <iimura@microunity.com>:
366 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
367 overflow at end of address space.
368 (generic_print_address): Use sprintf_vma.
370 1999-08-08 Ian Lance Taylor <ian@zembu.com>
372 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
373 MKDEP. Rebuild dependencies.
374 * Makefile.in: Rebuild.
376 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
378 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
379 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
380 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
381 (print_insn_hppa): Add 64 bit condition completers.
383 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
385 * hppa-dis.c (print_insn_hppa): Change condition args to use
386 '?' prefix.
388 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
390 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
391 code.
393 1999-07-21 Ian Lance Taylor <ian@zembu.com>
395 From Mark Elbrecht:
396 * configure.bat: Remove; obsolete.
398 1999-07-11 Ian Lance Taylor <ian@zembu.com>
400 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
401 (generic_strcat_address): Add cast to avoid warning.
402 * i386-dis.c: Initialize all structure fields to avoid warnings.
403 Add ATTRIBUTE_UNUSED as appropriate.
405 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
407 * sparc-dis.c (print_insn_sparc): Differentiate between
408 addition and oring when guessing symbol for comment.
410 1999-07-05 Nick Clifton <nickc@cygnus.com>
412 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
413 constant.
415 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
417 * i386-dis.c: Mention intel mode specials in macro char comment.
419 1999-06-21 Ian Lance Taylor <ian@zembu.com>
421 * alpha-dis.c: Don't include <stdlib.h>.
422 * arm-dis.c: Include "sysdep.h".
423 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
424 "sysdep.h".
425 * Makefile.am: Rebuild dependencies.
426 * Makefile.in: Rebuild.
428 1999-06-16 Nick Clifton <nickc@cygnus.com>
430 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
431 SWIs.
433 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
435 * arm-dis.c (arm_regnames): Turn into a pointer to a register
436 name set.
437 (arm_regnames_standard): New variable: Array of ARM register
438 names according to ARM instruction set nomenclature.
439 (arm_regnames_apcs): New variable: Array of ARM register names
440 according to ARM Procedure Call Standard.
441 (arm_regnames_raw): New variable: Array of ARM register names
442 using just 'r' and the register number.
443 (arm_toggle_regnames): New function: Toggle the chosen register set
444 naming scheme.
445 (parse_disassembler_options): New function: Parse any target
446 disassembler command line options.
447 (print_insn_big_arm): Call parse_disassembler_options if any
448 are defined.
449 (print_insn_little_arm): Call parse_disassembler_options if any
450 are defined.
452 1999-06-13 Ian Lance Taylor <ian@zembu.com>
454 * i386-dis.c (FWAIT_OPCODE): Define.
455 (used_prefixes): New static variable.
456 (fetch_data): Don't print an error message if we have already
457 fetched some bytes successfully.
458 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
459 (prefix_name): New static function.
460 (print_insn_i386): If setjmp fails, indicating a data error, but
461 we have managed to fetch some bytes, print the first one as a
462 prefix or a .byte pseudo-op. If fwait is followed by a non
463 floating point instruction, print the first prefix. Set
464 used_prefixes when prefixes are used. If any prefixes were not
465 used after disassembling the instruction, print the first prefix
466 instead of printing the instruction.
467 (putop): Set used_prefixes when prefixes are used.
468 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
469 (OP_DIR, OP_SIMD_Suffix): Likewise.
471 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
473 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
474 Support signx %reg, clruw %reg.
476 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
478 * sparc-opc.c: Add aliases Solaris as supports.
480 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
482 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
483 * Makefile.in: Regenerated.
485 1999-06-03 Philip Blundell <philb@gnu.org>
487 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
488 when target is PC-relative.
490 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
492 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
493 MOVE MACSR,CCR.
495 * m68k-dis.c (fetch_arg): Add places `n', `o'.
497 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
498 Add mcf5206e to appropriate instructions.
499 Add alias for MAC, MSAC.
501 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
502 `N'.
504 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
505 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
507 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
509 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
511 * i386-dis.c (Ed): Define.
512 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
513 (Rw): Remove.
514 (OP_rm): Rename to OP_Rd.
515 (ONE): Remove.
516 (OP_ONE): Remove.
517 (putop): Add const to template and p.
518 (print_insn_x86): Delete.
519 (print_insn_i386): Merge old function print_insn_x86. Add const
520 to dp.
521 (struct dis386): Add const to name.
522 (dis386_att, dis386_intel): Add const.
523 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
524 (names32, names16, names8, names_seg, index16): Add const.
525 (grps, prefix_user_table, float_reg): Add const.
526 (float_mem_att, float_mem_intel): Add const.
527 (oappend): Add const to s.
528 (OP_REG): Add const to s.
529 (ptr_reg): Add const to s.
530 (dofloat): Add const to dp.
531 (OP_C): Don't skip modrm, it's now done in OP_Rd.
532 (OP_D): Ditto.
533 (OP_T): Ditto.
534 (OP_Rd): Check for valid mod. Call Op_E to print.
535 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
536 (OP_MS): Check for valid mod. Call Op_EM to print.
537 (OP_3DNowSuffix): Set obufp and use oappend rather than
538 strcat. Call BadOp() for errors.
539 (OP_SIMD_Suffix): Likewise.
540 (BadOp): New function.
542 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
544 * i386-dis.c (dis386_intel): Remove macro chars, except for
545 jEcxz. Change cWtR and cRtd to cW and cR.
546 (dis386_twobyte_intel): Remove macro chars here too.
547 (putop): Handle R and W macros for intel mode.
549 * i386-dis.c (SIMD_Fixup): New function.
550 (dis386_twobyte_att): Use it on movlps and movhps, and change
551 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
552 (dis386_twobyte_intel): Same here.
554 * i386-dis.c (Av): Remove.
555 (Ap): remove lptr.
556 (lptr): Remove.
557 (OPSIMD): Define.
558 (OP_SIMD_Suffix): New function.
559 (OP_DIR): Remove dead code.
560 (eAX_reg..eDI_reg): Renumber.
561 (onebyte_has_modrm): Table numbering comments.
562 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
563 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
564 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
565 and handle SIMD cmp insns in OP_SIMD_Suffix.
566 (info->bytes_per_line): Bump from 5 to 6.
567 (OP_None): Remove.
568 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
569 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
571 PIII SIMD support from Doug Ledford <dledford@redhat.com>
572 * i386-dis.c (XM, EX, None): Define.
573 (OP_XMM, OP_EX, OP_None): New functions.
574 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
575 (GRP14): Rename to GRPAMD.
576 (GRP*): Add USE_GROUPS flag.
577 (PREGRP*): Define.
578 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
579 (twobyte_has_modrm): Add SIMD entries.
580 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
581 (grps): Add SIMD insns.
582 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
583 oappend repz if uses_f3_prefix. Add code to handle new groups for
584 SIMD insns.
586 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
587 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
588 operand from Av to Jv.
590 1999-05-07 Nick Clifton <nickc@cygnus.com>
592 * mcore-dis.c (print_insn_mcore): Use .short to display
593 unidentified instructions, not .word.
595 1999-04-26 Tom Tromey <tromey@cygnus.com>
597 * aclocal.m4, configure: Updated for new version of libtool.
599 1999-04-14 Doug Evans <devans@casey.cygnus.com>
601 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
602 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
604 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
606 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
607 instructions.
609 1999-04-10 Doug Evans <devans@casey.cygnus.com>
611 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
612 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
614 1999-04-06 Ian Lance Taylor <ian@zembu.com>
616 * opintl.h (LC_MESSAGES): Never define.
618 1999-04-04 Ian Lance Taylor <ian@zembu.com>
620 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
621 (separator_char, scale_char): Likewise.
622 (print_insn_x86): Likewise.
623 (print_insn_i386): Likewise. Add declaration.
625 1999-03-26 Doug Evans <devans@casey.cygnus.com>
627 * fr30-dis.c: Rebuild.
628 * m32r-dis.c: Rebuild.
630 1999-03-23 Ian Lance Taylor <ian@zembu.com>
632 * m68k-opc.c: Change compare instructions to use "@s" rather than
633 ";s" when used with an immediate operand.
635 1999-03-22 Doug Evans <devans@casey.cygnus.com>
637 * cgen-opc.c (cgen_set_cpu): Delete.
638 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
639 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
640 Rebuild.
641 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
642 Rebuild.
643 * po/opcodes.pot: Rebuild.
645 1999-03-16 Martin Hunt <hunt@cygnus.com>
647 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
649 1999-03-11 Doug Evans <devans@casey.cygnus.com>
651 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
652 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
653 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
654 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
655 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
656 * m32r-opinst.c: Rebuild.
658 1999-02-25 Doug Evans <devans@casey.cygnus.com>
660 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
661 (cgen_hw_lookup_by_num): Rewrite.
662 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
663 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
664 * m32r-opinst.c: Rebuild.
666 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
668 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
669 (insert_jhint): Fix insertion mask.
670 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
672 1999-02-10 Doug Evans <devans@casey.cygnus.com>
674 * Makefile.in: Rebuild.
676 1999-02-09 Doug Evans <devans@casey.cygnus.com>
678 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
679 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
680 * Makefile.am: Remove references to them.
681 (HFILES): Add fr30-desc.h,m32r-desc.h.
682 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
683 m32r-opinst.c.
684 (ALL_MACHINES): Update.
685 * configure.in: Redo handling of cgen_files.
686 (bfd_i960_arch): Delete i960c-*.lo files.
687 * configure: Regenerate.
688 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
689 (hash_insn_array): Rewrite.
690 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
691 (hash_insn_array): Rewrite.
692 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
693 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
694 (cgen_lookup_get_insn_operands): Ditto.
695 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
696 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
697 * po/POTFILES.in: Rebuild.
698 * po/opcodes.pot: Rebuild.
700 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
702 * Makefile.am: Rebuild dependencies.
703 (HFILES): Add fr30-opc.h.
704 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
705 * Makefile.in: Rebuild.
707 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
708 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
709 AC_PROG_INSTALL.
710 * acconfig.h: Remove.
711 * configure: Rebuild with current autoconf/automake.
712 * aclocal.m4: Likewise.
713 * config.in: Likewise.
714 * Makefile.in: Likewise.
716 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
718 * m68k-opc.c: Correct move (not movew) to status word on 5200.
720 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
722 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
723 * i386-dis.c (x_mode): Define.
724 (dis386): Remove.
725 (dis386_att): New.
726 (dis386_intel): New.
727 (dis386_twobyte): Remove.
728 (dis386_twobyte_att): New.
729 (dis386_twobyte_intel): New.
730 (print_insn_x86): Use new arrays.
731 (float_mem): Remove.
732 (float_mem_intel): New.
733 (float_mem_att): New.
734 (dofloat): Use new float_mem arrays.
735 (print_insn_i386_att): New.
736 (print_insn_i386_intel): New.
737 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
738 (putop): Handle intel syntax.
739 (OP_indirE): Handle intel syntax.
740 (OP_E): Handle intel syntax.
741 (OP_I): Handle intel syntax.
742 (OP_sI): Handle intel syntax.
743 (OP_OFF): Handle intel syntax.
747 1999-01-27 Doug Evans <devans@casey.cygnus.com>
749 * fr30-opc.h,fr30-opc.c: Rebuild.
750 * i960c-opc.h,i960c-opc.c: Rebuild.
751 * m32r-opc.c: Rebuild.
753 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
755 * hppa-dis.c: revert HP merge changes until HP gives us
756 an updated file.
758 1999-01-19 Nick Clifton <nickc@cygnus.com>
760 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
761 offsets as well as symbloic address.
763 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
765 * hppa-dis.c: fix comments and some indentation.
767 1999-01-12 Doug Evans <devans@casey.cygnus.com>
769 * fr30-opc.c,i960c-opc.c: Regenerate.
771 1999-01-11 Doug Evans <devans@casey.cygnus.com>
773 * fr30-opc.c: Regenerate.
775 1999-01-06 Doug Evans <devans@casey.cygnus.com>
777 * m32r-dis.c: Regenerate.
779 1999-01-05 Doug Evans <devans@casey.cygnus.com>
781 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
782 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
783 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
785 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
787 * configure.in: Require autoconf 2.12.1 or higher.
789 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
791 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
793 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
795 * fr30-opc.c: Regenerated.
797 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
799 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
801 1998-12-15 Dave Brolley <brolley@cygnus.com>
803 * fr30-opc.c,fr30-opc.h: Regenerated.
805 1998-12-14 Dave Brolley <brolley@cygnus.com>
807 * fr30-opc.c,fr30-opc.h: Regenerated.
809 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
811 * fr30-opc.c,fr30-opc.h: Regenerated.
813 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
815 * m32r-opc.c: Regenerate.
817 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
819 * dis-buf.c (generic_strcat_address): reformat to GNU coding
820 conventions. change sprintf call to an sprintf_vma call.
822 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
824 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
826 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
828 The following changes were made by
829 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
830 David Taylor <taylor@texas.cygnus.com>, and
831 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
832 merge in changes by HP; HP did not create ChangeLog entries.
834 * dis-buf.c (generic_strcat_address): new function.
836 * hppa-dis.c: Changes to improve hppa disassembly.
837 Changed formatting in : reg_names, fp_reg_names,control_reg,
838 New variables : sign_extension_names, deposit_names, conversion_names
839 float_test_names, compare_cond_names_double, add_cond_names_double,
840 logical_cond_names_double, unit_cond_names_double,
841 branch_push_pop_names, saturation_names, shift_names, mix_names,
842 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
843 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
844 (fput_const): renamed as fput_hex_const
845 (print_insn_hppa):
846 - use the macros fputs_filtered and
847 fput_decimal_const whenever possible; calls to sign_extend require
848 2 params -- add a missing second param of 0.
849 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
850 architecture version number of current machine. HP folks are
851 trying to handle situation where the target program was compiled
852 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
853 visa versa.
854 - added new cases : 'g', 'B', 'm'
855 - added cases specifically for PA 2.0
856 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
857 - calls to fput_const become calls to fput_hex_const
859 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
861 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
862 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
863 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
864 * Makefile.in: Rebuilt.
865 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
866 i960-dis.c to ta.
867 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
868 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
870 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
872 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
874 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
876 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
878 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
879 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
881 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
883 * fr30-opc.c: Regenerate.
885 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
887 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
889 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
891 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
893 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
895 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
897 1998-11-30 Doug Evans <devans@casey.cygnus.com>
899 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
900 CGEN_INSN_BASE_VALUE.
901 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
902 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
904 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
906 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
908 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
910 * fr30-asm.c,fr30-dis.c: Regenerated.
912 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
914 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
916 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
918 * fr30-opc.c: Regenerated.
920 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
922 * fr30-opc.c: Regenerated.
923 * fr30-opc.h: Regenerated.
924 * fr30-dis.c: Regenerated.
925 * fr30-asm.c: Regenerated.
927 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
929 * mips-opc.c (sync.p,sync.l): Swap insn values.
931 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
933 * fr30-opc.c: Regenerate.
935 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
937 * fr30-opc.c: Regenerated.
938 * fr30-opc.h: Regenerated.
940 1998-11-18 Doug Evans <devans@casey.cygnus.com>
942 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
943 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
945 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
947 * fr30-opc.c: Regenerated.
949 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
951 * fr30-opc.c: Regenerated.
952 * fr30-opc.h: Regenerated.
953 * fr30-dis.c: Regenerated.
954 * fr30-asm.c: Regenerated.
956 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
958 * po/opcodes.pot: Regenerated.
959 * fr30-opc.c: Regenerated.
960 * fr30-opc.h: Regenerated.
961 * fr30-dis.c: Regenerated.
962 * fr30-asm.c: Regenerated.
964 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
966 * disassemble.c (disassembler): Add support for FR30 target.
968 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
970 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
971 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
973 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
975 * po/opcodes.pot: Regenerate.
976 * po/POTFILES.in: Regenerate.
977 * fr30-opc.c: Regenerate.
978 * fr30-opc.h: Regenerate.
980 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
982 * m32r-asm.c: Regenerate.
984 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
986 * configure.in: Added case for bfd_fr30_arch.
987 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
988 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
989 (CLEANFILES): Added stamp-fr30.
990 (FR30_DEPS): Added.
991 * fr30-asm.c: New file.
992 * fr30-dis.c: New file.
993 * fr30-opc.c: New file.
994 * fr30-opc.h: New file.
995 * po/POTFILES.in: Regenerated
996 * po/opcodes.pot: Regenerated
998 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
1000 * configure.in: detect cygwin* instead of cygwin32*
1001 * configure: regenerate
1003 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
1005 * mips-opc.c (IS_M): Added.
1007 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
1009 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1011 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
1013 * m32r-opc.h,m32r-opc.c: Regenerate.
1015 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1017 * i386-dis.c (OP_3DNowSuffix): New static function.
1018 (OPSUF): Define.
1019 (GRP14): Define.
1020 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1021 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1022 (insn_codep): New static variable.
1023 (print_insn_x86): Init insn_codep after prefixes.
1024 (grps): Add GRP14 entries for prefetch, prefetchw.
1025 (OP_REG): Reformat.
1027 From Jeff B Epler <jepler@usgs.gov>
1028 * i386-dis.c (Suffix3DNow): New table.
1030 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
1032 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1034 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
1036 * d10v-dis.c (print_operand): If num is nonzero, then
1037 add OPERAND_ACC1, not OPERAND_ACC0.
1039 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
1041 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1042 insns.
1044 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1046 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1047 class.
1049 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1051 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1053 1998-09-09 Michael Meissner <meissner@cygnus.com>
1055 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1056 to/from SPRs.
1058 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1060 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1061 object files.
1062 (print_insn_little_arm): Detect Thumb symbols in elf object
1063 files.
1065 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1067 * alpha-dis.c (print_insn_alpha): Use the machine type to
1068 decide which PALcode set to include.
1070 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1072 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1074 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1076 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1077 MSUB and MSUBS instructions.
1079 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1081 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1082 operand name macros.
1084 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1086 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1087 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1088 +, -, and d for ColdFire.
1090 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1091 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1092 (extract_mbe): Likewise.
1094 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1096 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1098 * m10300-opc.c: First cut at UDF instructions.
1100 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1102 * m32r-opc.c: Regenerate (remove semantic descriptions).
1104 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1106 * arm-dis.c (print_insn_big_arm): Fix indentation.
1107 (print_insn_little_arm): Likewise.
1109 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1111 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1112 attributes.
1113 (print_insn_little_arm): Likewise.
1115 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1117 Move all global state data into opcode table struct, and treat
1118 opcode table as something that is "opened/closed".
1119 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1120 (cgen_asm_init): Delete.
1121 (cgen_set_parse_operand_fn): New function.
1122 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1123 (cgen_dis_init): Delete.
1124 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1125 (cgen_current_{opcode_table_mach,endian}): Delete.
1126 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1128 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1130 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1131 instructions.
1133 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1135 * m10300-opc.c: Add entries for "no_match_operands" field in
1136 the opcode table.
1138 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1140 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1142 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1144 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1146 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1148 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1149 the first prefix.
1150 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1151 than `fnstsw %eax'.
1152 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1153 will be masked later.
1155 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1157 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1159 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1161 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1163 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1165 * m10300-dis.c: Only recognize instructions from the currently
1166 selected machine.
1167 * m10300-opc.c: Add field indicating the particular variant of
1168 the mn10300 each instruction is available on.
1170 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1172 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1173 * Makefile.am: Rebuild dependencies.
1174 (CFILES): Add vax-dis.c.
1175 (ALL_MACHINES): Add vax-dis.lo.
1176 * aclocal.m4: Rebuild with current libtool.
1177 * configure, Makefile.in: Rebuild.
1179 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1181 * vax-dis.c: New file, from work by Pauline Middelink
1182 <middelin@polyware.iaf.nl>.
1183 * disassemble.c (ARCH_vax): Define if ARCH_all.
1184 (disassembler): Add case for ARCH_vax.
1185 * makefile.vms: Support compilation on vms/vax.
1187 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1189 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1190 related to sign extension and the size of ints.
1192 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1194 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1195 instructions. Support (sp) addressing mode by expanding it into
1196 (0,sp).
1198 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1200 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1202 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1204 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1206 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1208 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1209 sysexit.
1211 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1213 * mips-dis.c (print_insn_little_mips): Previously, instruction
1214 printing references the symbol table to determine whether the
1215 instruction resides in a block regular instructions or mips16
1216 instructions. However, when the disassembler gets used in other
1217 environments where the symbol table is not present, we no longer
1218 rely in the symbol table, rather, use the low bit of the
1219 instructions address to guess. There should be no change for usage
1220 of the disassembler in host based programs, gdb, objdump.
1221 (print_insn_big_mips): ditto.
1222 (print_insn_mips): ditto
1224 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1226 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1228 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1230 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1232 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1234 * i386-dis.c (index16): Add '%' to register names. Use ','
1235 instead of '+'.
1237 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1239 * i386-dis.c: Don't print opcode suffix when we can figure out the
1240 size (and gas can!) by register operands, or from the default
1241 size.
1242 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1243 macro to 'E'.
1244 (dis386, dis386_twobyte, grps): Use new suffix macros.
1245 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1246 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1247 order of cmps operands to agree with Intel docs. Correct operand
1248 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1249 agree with Intel docs.
1250 (print_insn_x86): Print orphan fwait before other prefixes.
1251 Return correct byte count for orphan fwait with prefixes. Don't
1252 print `bound' operands in reverse order.
1253 (ckprefix): Stop accumulating prefixes if we get fwait.
1254 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1256 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1258 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1259 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1261 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1263 Fix problems when bfd_vma is wider than long.
1264 * i386-dis.c: Make op_address and start_pc unsigned.
1265 (set_op): Make parameter unsigned.
1266 (print_insn_x86): Cast to bfd_vma when passing a value to
1267 print_address_func.
1268 * ns32k-dis.c (CORE_ADDR): Don't define.
1269 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1270 bfd_scan_vma to read back address.
1271 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1272 to format it.
1273 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1274 (NEXTULONG): New definition.
1275 (print_insn_m68k): Avoid overflow when computing third argument of
1276 print_insn_arg.
1277 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1278 Use disp instead of val to store offset values.
1279 (print_indexed): Use base_disp instead of word to store base
1280 displacement, to avoid overflow.
1281 * m10300-dis.c (disassemble): Cast value to long when computing
1282 pc-relative address, to get correct sign extension.
1284 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1286 * m32r-opc.c: Regenerate.
1288 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1290 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1291 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1293 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1295 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1297 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1299 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1300 functions to void.
1301 (OP_DSreg): Rename from OP_DSSI.
1302 (OP_ESreg): Rename from OP_ESDI.
1303 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1304 (DSBX): Define.
1305 (append_seg): Rename from append_prefix.
1306 (ptr_reg): New function.
1307 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1308 Add DSBX for xlat.
1309 (PREFIX_ADDR): Rename from PREFIX_ADR.
1310 (float_reg): Add non-broken opcodes for people who don't want
1311 UNIXWARE_COMPAT.
1313 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1315 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1316 68000/68008/68010.
1318 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1320 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1322 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1324 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1325 0; produce error message for shifts of size 32 (or 64 for 64-bit
1326 shifts), because the hardware doesn't support them.
1328 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1330 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1331 LONG_2, LONG_2b formats to use this new operand.
1333 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1335 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1337 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1339 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1340 endian data support.
1342 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1344 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1345 and SHORT_B3b formats to use Rb instead of Ra.
1347 Add FLAG_MUL16 to MUL2XH opcode.
1349 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1350 to existing 1.1.1 parallelisation prohibition procedure.
1352 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1354 * m32r-asm.c,m32r-dis.c: Regenerate.
1356 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1358 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1359 with a shift count of 0.
1361 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1363 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1364 (cgen_hw_lookup_by_num): New function.
1366 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1368 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1370 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1372 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1373 as big-endian on SPARClite.
1375 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1377 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1379 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1381 * po/Make-in (install-info): New target.
1383 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1385 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1386 * configure: Rebuild.
1388 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1390 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1391 variety of ISA2 instructions to set bottom ten bits of trap code.
1393 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1395 * Makefile.am (config.status): Add explicit target so that
1396 config.status depends upon bfd/configure.in.
1397 * Makefile.in: Rebuild.
1399 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1401 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1402 instructions to set bottom ten bits of break code.
1403 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1404 for above optional argument.
1406 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1408 * makefile.vms: Run dec c with /nodebug.
1410 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1412 * Makefile.in: Rebuilt.
1413 * Makefile.am: Regenerated dependencies with mkdep.
1415 * opintl.h (_): Define as dgettext.
1417 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1419 * cgen-asm.c: Internationalised.
1420 * m32r-asm.c: Internationalised.
1421 * m32r-dis.c: Internationalised.
1422 * m32r-opc.c: Internationalised.
1424 * aclocal.m4: Regenerated.
1425 * configure: Regenerated.
1426 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1427 * Makefile.in: Rebuild.
1428 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1429 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1431 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1433 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1434 after AC_PROG_CC.
1435 * aclocal.m4, configure: Rebuild with current tools.
1437 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1439 * opintl.h: New file - contains internationalisation macros used
1440 by source files in this directory.
1441 * po/: New subdirectory - contains internationalisation files.
1442 * po/Make-in: New file - Makefile constructor.
1443 * po/POTFILES.in: New file - list of files in opcodes directory
1444 that should be scan for internationalisation macros.
1445 * po/opcodes.pot: New file - list of internationisation strings
1446 found in files mentioned in po/POTFILES.in.
1447 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1448 entry. Add intl directory to include paths.
1449 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1450 HAVE_STRCPY, HAVE_LC_MESSAGES
1451 * configure.in: Add rule to build Makefile in po subdirectory.
1452 * Makefile.in: Rebuilt.
1453 * aclocal.m4: Rebuilt.
1454 * config.in: Rebuilt.
1455 * configure: Rebuilt.
1456 * alpha-opc.c: Internationalised.
1457 * arc-dis.c: Internationalised.
1458 * arc-opc.c: Internationalised.
1459 * arm-dis.c: Internationalised.
1460 * cgen-asm.c: Internationalised.
1461 * d30v-dis.c: Internationalised.
1462 * dis-buf.c: Internationalised.
1463 * h8300-dis.c: Internationalised.
1464 * h8500-dis.c: Internationalised.
1465 * i386-dis.c: Internationalised.
1466 * m10200-dis.c: Internationalised.
1467 * m10300-dis.c: Internationalised.
1468 * m68k-dis.c: Internationalised.
1469 * m88k-dis.c: Internationalised.
1470 * mips-dis.c: Internationalised.
1471 * ns32k-dis.c: Internationalised.
1472 * opintl.h: Internationalised.
1473 * ppc-opc.c: Internationalised.
1474 * sparc-dis.c: Internationalised.
1475 * v850-dis.c: Internationalised.
1476 * v850-opc.c: Internationalised.
1478 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1480 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1481 (asm_hash_table_entries): New variable.
1482 (cgen_asm_init): Free asm_hash_table_entries.
1483 (hash_insn_array,hash_insn_list): New functions.
1484 (build_asm_hash_table): Use them. Hash macro insns as well.
1485 (cgen_asm_lookup_insn): Update.
1486 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1487 (dis_hash_table_entries): New variable.
1488 (cgen_dis_init): Free dis_hash_table_entries.
1489 (hash_insn_array,hash_insn_list): New functions.
1490 (build_dis_hash_table): Use them. Hash macro insns as well.
1491 (cgen_dis_lookup_insn): Update.
1492 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1493 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1494 (cgen_macro_insn_count): New function.
1495 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1497 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1499 * i386-dis.c (OP_DSSI): Print segment override.
1501 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1503 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1504 operator.
1506 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1508 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1509 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1510 * configure.in: Define and substitute WIN32LDFLAGS and
1511 WIN32LIBADD.
1512 * aclocal.m4: Rebuild with new libtool.
1513 * configure, Makefile.in: Rebuild.
1515 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1517 * m32r-opc.c: Regenerate.
1519 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1521 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1522 before trying to copy it.
1523 * Makefile.in: Rebuild.
1525 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1527 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1529 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1531 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1532 from an arbitrary valid buffer instead of fetching them on demand
1533 using fetch_data().
1534 (invalid_float): use bit_extract_simple() instead of bit_extract().
1536 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1538 From H.J. Lu <hjl@gnu.org>:
1539 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1540 to Ev for both.
1542 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1544 * Branched binutils 2.9.
1546 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1548 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1549 disassembling last 4 bytes of a section.
1551 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1553 Fix some gcc -Wall warnings:
1554 * arc-dis.c (print_insn): Add casts to avoid warnings.
1555 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1556 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1557 * m10200-dis.c (disassemble): Likewise.
1558 * m10300-dis.c (disassemble): Likewise.
1559 * ns32k-dis.c (print_insn_ns32k): Likewise.
1560 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1561 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1562 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1563 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1564 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1565 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1566 * tic80-dis.c (print_one_instruction): Likewise.
1567 * w65-dis.c (print_operand): Likewise.
1568 * z8k-dis.c (fetch_data): Likewise.
1569 * a29k-dis.c: Add return type for find_byte_func_type.
1570 * arc-opc.c: Include <stdio.h>. Remove declarations of
1571 insert_multshift and extract_multshift.
1572 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1573 conditionals.
1574 (extract_value): Fully parenthesize expression.
1575 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1576 * h8500-opc.h (h8500_table): Fully bracket initializer.
1577 * w65-opc.h (optable): Likewise.
1578 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1579 * i386-dis.c (OP_E): Initialize local variables.
1580 * m10200-dis.c (print_insn_mn10200): Likewise.
1581 * mips-dis.c (print_insn_mips16): Likewise.
1582 * sh-dis.c (print_insn_shx): Likewise.
1583 * v850-dis.c (print_insn_v850): Likewise.
1584 * ns32k-dis.c (print_insn_arg): Declare.
1585 (get_displacement, invalid_float): Declare.
1586 (list_search, sign_extend, flip_bytes): Declare return type.
1587 (get_displacement): Likewise.
1588 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1589 string.
1590 (print_insn_ns32k): Make i unsigned.
1591 (invalid_float): Make static. Declare type of val.
1592 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1593 on each for iteration.
1594 * tic30-dis.c (get_indirect_operand): Likewise.
1595 * z8k-dis.c (print_insn_z8001): Declare return type.
1596 (print_insn_z8002): Likewise.
1597 (unparse_instr): Fix sprintf format strings.
1599 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1601 * mips-opc.c: Add "sync.l" and "sync.p".
1603 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1605 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1606 default m68k variant to recognize.
1608 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1609 (ctrl, cobr, mem, ea): Likewise.
1610 (print_addr): Likewise. Remove cast.
1611 (ea): Cast argument of print_addr to bfd_vma.
1613 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1614 variable value.
1615 (cgen_parse_unsigned_integer): Likewise.
1616 (cgen_parse_address): Likewise.
1618 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1620 * i960-dis.c (ctrl): Add full braces to structure initialization.
1621 (cobr, mem, reg): Likewise.
1622 (ea): Correct parenthesization in expression.
1624 * cgen-asm.c: Include <ctype.h>.
1625 (build_asm_hash_table): Remove unused local variable i.
1626 (cgen_parse_keyword): Add casts to avoid warnings.
1628 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1629 symbol. Fix indentation.
1630 (print_insn_little_arm): Likewise.
1632 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1634 * configure.in: Use AM_DISABLE_SHARED.
1635 * aclocal.m4, configure: Rebuild with libtool 1.2.
1637 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1639 These patches are courtesy of Jonathan Walton and Tony Thompson
1640 (athompso@cambridge.arm.com).
1642 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1643 relative addresses.
1645 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1646 both the offset and the label closest to the destination.
1648 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1650 * m32r-opc.h: Regenerate.
1652 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1654 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1656 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1658 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1659 assume that info->symbols is non-empty.
1661 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1663 * alpha-opc.c (cvtqs) There is no such thing.
1664 (cvttq): Missing most of the /*d variants.
1666 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1668 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1669 delayed branches or jumps.
1671 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1673 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1674 to *info->symbols.
1675 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1676 * tic30-dis.c (print_branch): Likewise.
1678 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1680 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1681 saved_symbol code as it is no longer needed.
1683 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1685 * cgen-asm.c: Include symcat.h.
1686 * cgen-dis.c,cgen-opc.c: Ditto.
1687 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1689 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1691 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1693 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1695 * m32r-opc.[ch]: Regenerate.
1697 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1699 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1700 arguments. Don't perform validation here.
1701 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1703 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1705 * m32r-opc.c: Regenerate.
1707 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1709 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1710 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1712 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1714 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1716 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1718 * configure.in: Get the version number from BFD.
1719 * configure: Rebuild.
1721 From H.J. Lu <hjl@gnu.org>:
1722 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1723 * Makefile.in: Rebuild.
1725 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1727 * m32r-opc.c: Regenerate.
1728 * m32r-opc.h: Regenerate.
1730 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1732 * m32r-opc.c: Regenerate.
1734 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1736 Fix rac to accept only a0:
1737 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1738 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1739 Introduce OPERAND_GPR.
1740 * d10v-dis.c (print_operand): Likewise.
1742 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1744 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1745 (cgen_hw_lookup): Make result const.
1746 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1748 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1750 * configure, aclocal.m4: Rebuild with new libtool.
1752 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1754 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1755 instructions use a PC relative branch, not absolute.
1757 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1759 * configure.in: Set libtool_enable_shared rather than
1760 libtool_shared. Remove diversion hack.
1761 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1763 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1765 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1766 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1768 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1770 * tic30-dis.c: New file.
1771 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1772 * configure.in: Handle bfd_tic30_arch.
1773 * Makefile.am: Rebuild dependencies.
1774 (CFILES): Add tic30-dis.c
1775 (ALL_MACHINES): Add tic30-dis.lo.
1776 * configure, Makefile.in: Rebuild.
1778 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1780 * m32r-opc.h (HAVE_CPU_M32R): Define.
1782 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1784 * v850-opc.c (insertion routines): If both alignment and size is
1785 wrong then report this.
1787 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1789 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1790 Only recognize instructions for the current target_processor.
1792 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1794 * d10v-dis.c (PC_MASK): Correct value.
1795 (print_operand): If there's a reloc, don't calculate the
1796 address because they could be in different sections.
1798 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1800 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1801 instruction after the 4650's "mul" instruction; nobody's using the
1802 4010 these days. If object files someday indicate which processor
1803 variant they're intended for, we can do a better job at this.
1805 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1807 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1808 table provided entry size. Use CGEN_INSN_MNEMONIC.
1809 (cgen_parse_keyword): Rewrite.
1810 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1811 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1812 * cgen-opc.c: Clean up pass over `struct foo' usage.
1813 (cgen_keyword_lookup_value): Handle "" entry.
1814 (cgen_keyword_add): Likewise.
1816 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1818 * mips-opc.c: Add FP_D to s.d instruction flags.
1820 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1822 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1824 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1826 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1827 PC relative offset forms before the 15 bit forms. An assembler command
1828 line option now chooses the default.
1830 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1832 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1833 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1835 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1837 * configure: Only build libopcodes shared if --enable-shared's value
1838 was `yes', or was set to `*opcodes*'.
1839 * aclocal.m4: Likewise.
1840 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1841 original source of this bit of code. It's not clear what the best fix
1842 would be, though.
1844 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1846 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1847 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1848 offset forms before the 15 bit forms, to default to the long forms.
1850 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1852 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1854 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1856 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1857 symbol if none is present.
1858 (print_insn_big_arm): Prevent examination of stored symbol if
1859 none is present.
1861 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1863 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1865 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1867 * disassemble.c: Remove disasm_symaddr() function.
1869 * arm-dis.c: Use info->symbol instead of info->flags to determine
1870 if disassmbly should be in Thumb or Arm mode.
1872 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1874 * arm-dis.c: Add support for disassembling Thumb opcodes.
1875 (print_insn_thumb): New function.
1877 * disassemble.c (disasm_symaddr): New function.
1879 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1880 (thumb_opcodes): Table of Thumb opcodes.
1882 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1884 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1886 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1887 and 'v' as operand types.
1889 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1891 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1892 <olivier.carmona@di.epfl.ch>.
1893 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1894 which has a two word opcode with a one word argument.
1896 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1898 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1899 unsigned, not signed.
1900 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1902 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1904 * d10v-dis.c (print_operand):
1905 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1907 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1909 * d10v-opc.c (OPERAND_FLAG): Split into:
1910 (OPERAND_FFLAG, OPERAND_CFLAG) .
1911 (FSRC): Split into:
1912 (FFSRC, CFSRC).
1914 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1916 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1917 field for all INSN_MACRO's.
1918 * mips16-opc.c: same
1920 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1922 * mips-opc.c (sync,cache): These are 3900 insns.
1924 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1926 sh-opc.h (sh_table): Remove ftst/nan.
1928 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1930 * mips-opc.c (ffc, ffs): Fix mask.
1932 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1934 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1935 control registers.
1937 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1939 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1940 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1942 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1944 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1945 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1947 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1949 * v850-dis.c (disassemble): Replace // with /* ... */
1951 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1953 * sparc-opc.c: Add wr & rd for v9a asr's.
1954 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1955 (v9a_asr_reg_names): New variable.
1956 Patch from David Miller <davem@vger.rutgers.edu>.
1958 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1960 * sparc-opc.c (v9notv9a): New insn type.
1961 (IMPDEP): Move to the end to not conflict with edge8 et al.
1962 Patch from David Miller <davem@vger.rutgers.edu>.
1964 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1966 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1968 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1970 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1972 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1974 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1975 of disassemble_info structure to determine if an overlay address
1976 has a matching symbol in low memory.
1978 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1979 new symbol_at_address_func field in disassemble_info structure.
1981 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1983 * v850-opc.c (extract_d22): Use signed arithmatic.
1985 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1987 * mips-opc.c: Three op mult is not an ISA insn.
1989 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1991 * mips-opc.c: Fix formatting.
1993 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1995 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1996 than assuming that char is signed. Explicitly sign extend 16 bit
1997 values, rather than assuming that short is 16 bits.
1998 (OP_sI, OP_J, OP_DIR): Likewise.
2000 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2002 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2003 system registers.
2005 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2007 * v850-opc.c: Fix typo in comment.
2009 * v850-dis.c (disassemble): Add test of processor type when
2010 determining opcodes.
2012 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2014 * configure.in: Use a diversion to set enable_shared before the
2015 arguments are parsed.
2016 * configure: Rebuild.
2018 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2020 * m68k-opc.c (TBL1): Use ! rather than `.
2021 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2023 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2025 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2027 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2029 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2030 for mcf5200.
2032 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2033 * aclocal.m4: Rebuild with new libtool.
2034 * configure: Rebuild.
2036 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2038 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2040 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2042 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2044 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2046 * v850-opc.c (v850_opcodes): Further rearrangements.
2048 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2050 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2052 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2054 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2055 parser to work.
2057 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2059 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2061 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2063 * v850-opc.c: Initialise processors field of v850_opcode structure.
2065 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2067 Merge changes from Martin Hunt:
2069 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2071 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2072 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2073 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2075 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2077 * d30v-dis.c (print_insn): First operand of d*i (delayed
2078 branch) instructions is relative.
2080 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2081 (d30v_operand_table): Add IMM6S3 type.
2082 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2084 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2085 and cmp instructions.
2087 * d30v-opc.c: Correct entries for repeat*, and sat*.
2088 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2089 types. Correct several formats.
2091 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2093 * d30v-opc.c (pre_defined_registers): Change control registers.
2095 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2096 SHORT_C2. Manual was incorrect.
2098 * d30v-dis.c (lookup_opcode): Return value now indicates
2099 if an opcode has a short and a long form. Used for deciding
2100 to append a ".s" or ".l".
2101 (print_insn): Append a ".s" to an instruction if it is
2102 the short form and ".l" if it is a long form. Do not append
2103 anything if the instruction has only one possible size.
2105 * d30v-opc.c: Change mulx2h to require an even register.
2106 New form: SHORT_A2; a SHORT_A form that needs an even
2107 register as the first operand.
2109 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2110 instruction was not being disassembled if there were an odd
2111 number of instructions.
2113 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2115 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2117 * v850-dis.c (disassemble): Improved display of register lists.
2119 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2121 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2122 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2123 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2124 fandnot1s, fandnot2s.
2126 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2128 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2130 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2132 * cgen-asm.c (cgen_parse_address): New argument resultp.
2133 All callers updated.
2134 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2136 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2138 * mn10200-dis.c (disassemble): PC relative instructions are
2139 relative to the next instruction, not the current instruction.
2141 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2143 * v850-dis.c (disassemble): Only signed extend values that are not
2144 returned by extract functions.
2145 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2147 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2149 * v850-opc.c: Update comments. Remove use of
2150 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2152 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2154 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2156 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2158 * configure: Rebuilt with latest devo autoconf for NT support.
2160 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2162 * v850-dis.c (disassemble): Use curly brace syntax for register
2163 lists.
2165 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2166 where r0 is being used as a destination register.
2168 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2170 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2172 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2174 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2176 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2178 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2179 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2180 opcodes..
2182 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2184 * configure (cgen_files): Add support for v850e target.
2185 * configure.in (cgen_files): Add support for v850e target.
2187 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2189 * configure (cgen_files): Add support for v850ea target.
2190 * configure.in (cgen_files): Add support for v850ea target.
2192 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2194 * configure.in (bfd_arc_arch): Add.
2195 * configure: Rebuild.
2196 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2197 * Makefile.in: Rebuild.
2198 * arc-dis.c, arc-opc.c: New files.
2199 * disassemble.c (ARCH_all): Define ARCH_arc.
2200 (disassembler): Add ARC support.
2202 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2204 * v850-dis.c (disassemble): Add support for v850EA instructions.
2206 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2207 (v850_opcodes): Add v850EA instructions.
2209 * v850-dis.c (disassemble): Add support for v850E instructions.
2211 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2212 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2213 insert_spe, extract_spe): New Functions.
2214 (v850_opcodes): Add v850E instructions.
2216 * v850-opc.c: Reorganised and re-layed out to improve readability
2217 and portability.
2219 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2221 * configure: Rebuild with autoconf 2.12.1.
2223 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2225 * aclocal.m4, configure: Rebuild with new automake patches.
2227 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2229 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2230 * acinclude.m4: Just include acinclude.m4 from BFD.
2231 * aclocal.m4, configure: Rebuild.
2233 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2235 * Makefile.am: New file, based on old Makefile.in.
2236 * acconfig.h: New file.
2237 * acinclude.m4: New file.
2238 * stamp-h.in: New file.
2239 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2240 Removed shared library handling; now handled by libtool. Replace
2241 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2242 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2243 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2244 handling in AC_OUTPUT.
2245 * dep-in.sed: Change .o to .lo.
2246 * Makefile.in: Now built with automake.
2247 * aclocal.m4: Now built with aclocal.
2248 * config.in, configure: Rebuild.
2250 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2252 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2254 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2256 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2257 Make array const.
2258 * sparc-dis.c (sorted_opcodes): New static local.
2259 (struct opcode_hash): `opcode' is pointer to const element.
2260 (build_hash): First arg is now table of sorted pointers.
2261 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2262 (compare_opcodes): Update.
2264 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2266 * cgen-opc.c: #include <ctype.h>.
2267 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2268 Handle case insensitive hashing.
2269 (hash_keyword_value): Change type of `value' to unsigned int.
2271 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2273 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2274 precision FP, mark it as such. Likewise for double precision
2275 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2276 possible.
2278 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2280 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2281 negating it.
2282 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2283 nesting depth when all the macros are expanded.
2285 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2287 * sparc-opc.c: The fcmp v9a instructions take an integer register
2288 as a destination, not a floating point register. From Christian
2289 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2291 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2293 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2294 syntax. From Roman Hodek
2295 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2297 * i386-dis.c (twobyte_has_modrm): Fix pand.
2299 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2301 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2303 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2305 * arm-dis.c: Add prototypes for arm_decode_shift and
2306 print_insn_arm.
2308 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2310 * mips-opc.c: Add r3900 insns.
2312 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2314 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2315 print delay slot instructions on the same line. When using a PC
2316 relative load, add a comment with the value being loaded if it can
2317 be obtained.
2319 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2321 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2322 to pushS/popS for segment regs and byte constant so that
2323 pushw/popw printed when in 16 bit data mode.
2325 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2326 print cbtw, cwtd in 16 bit data mode.
2327 * i386-dis.c (putop): extra case W to support above.
2329 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2330 address size prefix in 16 bit address mode.
2332 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2334 * sh-dis.c: Reindent. Rename local variable fprintf to
2335 fprintf_fn.
2337 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2339 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2341 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2343 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2344 field membership.
2345 * mips16-opc.c (mip16_opcodes): same.
2347 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2349 * m68k-opc.c (moveb): Change $d to %d.
2351 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2353 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2354 (twobyte_has_modrm): Likewise.
2355 (grps): Likewise.
2356 (OP_MMX, OP_EM, OP_MS): New static functions.
2358 * i386-dis.c: Revert patch of April 4. The output now matches
2359 what gcc generates.
2361 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2363 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2364 of $simm16.
2366 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2368 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2370 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2372 * Makefile.in (install): Depend upon installdirs.
2373 (installdirs): New target.
2375 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2377 From Thomas Graichen <graichen@rzpd.de>:
2378 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2379 * configure: Rebuild.
2381 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2383 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2384 Delete string{,s}.h support.
2386 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2388 * cgen-asm.c (cgen_parse_operand_fn): New global.
2389 (cgen_parse_{{,un}signed_integer,address}): Update call to
2390 cgen_parse_operand_fn.
2391 (cgen_init_parse_operand): New function.
2392 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2393 from cgen_asm_init_parse.
2394 (m32r_cgen_assemble_insn): New operand `errmsg'.
2395 Delete call to as_bad, return error message to caller.
2396 (m32r_cgen_asm_hash_keywords): #if 0 out.
2398 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2400 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2401 not data register.
2402 [case 'J']: Fix typo in register name.
2404 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2406 * configure.in: Substitute SHLIB_LIBS.
2407 * configure: Rebuild.
2408 * Makefile.in (SHLIB_LIBS): New variable.
2409 ($(SHLIB)): Use $(SHLIB_LIBS).
2411 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2413 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2415 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2417 * disassemble.c (disassembler): Handle m32r.
2419 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2421 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2422 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2423 * Makefile.in (CFILES): Add them.
2424 (ALL_MACHINES): Add them.
2425 (dependencies): Regenerate.
2426 * configure.in (cgen_files): New variable.
2427 (bfd_m32r_arch): Add entry.
2428 * configure: Regenerate.
2430 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2432 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2433 * configure: Rebuild.
2435 * Makefile.in: Rebuild dependencies.
2437 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2439 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2440 fdivp.
2442 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2444 * Branched binutils 2.8.
2446 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2448 * m10200-dis.c: Rename from mn10200-dis.c.
2449 * m10200-opc.c: Rename from mn10200-opc.c.
2450 * m10300-dis.c: Rename from mn10300-dis.c
2451 * m10300-opc.c: Rename from mn10300-opc.c.
2452 * Makefile.in: Update accordingly.
2454 * mips16-opc.c: Add mul and dmul macros.
2456 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2458 * makefile.vms: Update CFLAGS, add clean target.
2460 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2462 * mips-opc.c: Add "wait". From Ralf Baechle
2463 <ralf@gnu.ai.mit.edu>.
2465 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2466 * configure, config.in: Rebuild.
2467 * sysdep.h: Include <stdlib.h> if it exists.
2468 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2469 <string.h>.
2470 * Makefile.in: Rebuild dependencies.
2472 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2474 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2475 Andrew Bray <andy@madhouse.demon.co.uk>.
2477 * mips-opc.c: Add cast when setting mips_opcodes.
2479 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2481 * v850-dis.c (disassemble): Fix sign extension problem.
2482 * v850-opc.c (extract_d*): Fix sign extension problems to make
2483 disassembly calculate branch offsets correctly.
2485 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2487 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2489 * mips-opc.c: Add dctr and dctw.
2491 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2493 * d30v-dis.c (print_insn): Change the way signed constants
2494 are displayed.
2496 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2498 * Makefile.in (BFD_H): New variable.
2499 (HFILES): New variable.
2500 (CFILES): Add all C files.
2501 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2502 Delete old dependencies, and build new ones.
2503 * dep-in.sed: New file.
2505 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2507 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2509 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2511 * mn10200-opc.c: Change "trap" to "syscall".
2512 * mn10300-opc.c: Add new "syscall" instruction.
2514 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2516 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2517 mulul insns on the coldfire.
2519 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2521 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2522 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2523 (print_insn_little_arm): Likewise.
2525 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2527 Based on patches from H.J. Lu <hjl@lucon.org>:
2528 * i386-dis.c (fetch_data): Add prototype.
2529 * m68k-dis.c (fetch_data): Add prototype.
2530 (dummy_print_address): Add prototype. Make static.
2531 * ppc-opc.c (valid_bo): Add prototype.
2532 * sparc-dis.c (build_hash_table): Add prototype.
2533 (is_delayed_branch, compute_arch_mask): Add prototypes.
2534 (print_insn_sparc): Make several local variables const.
2535 (compare_opcodes): Change arguments to const PTR. Add prototype.
2536 * sparc-opc.c (arg): Change name field to be const.
2537 (lookup_name, lookup_value): Add prototypes. Change table and
2538 name parameters to be const.
2539 (sparc_encode_asi): Change name parameter to be const.
2540 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2541 (sparc_encode_sparclet_cpreg): Likewise.
2542 (sparc_decode_asi): Change return type to be const.
2543 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2544 (sparc_decode_sparclet_cpreg): Likewise.
2546 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2548 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2549 Solaris doesn't like the combined options, and the -f is
2550 unnecessary.
2551 (stamp-tshlink, install): Likewise.
2553 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2555 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2556 as relaxable.
2558 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2560 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2562 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2564 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2565 the mc68000.
2567 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2569 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2571 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2573 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2575 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2577 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2579 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2581 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2582 floatformat_to_double to make portable.
2583 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2584 precision float.
2586 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2588 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2589 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2591 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2593 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2594 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2596 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2598 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2599 (OFF_SL_BR_SCALED): ... to this, and added the flag
2600 TIC80_OPERAND_BASEREL to the flags word.
2601 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2602 OFF_SL_BR_SCALED.
2604 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2606 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2607 Change mips_opcodes from const array to a pointer,
2608 and change bfd_mips_num_opcodes from const int to int,
2609 so that we can increase the size of the mips opcodes table
2610 dynamically.
2612 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2614 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2615 store BITNUM values in the table in one's complement form
2616 to match behavior when assembler is given a raw numeric
2617 value for a BITNUM operand.
2618 * tic80-dis.c (print_operand_bitnum): Ditto.
2620 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2622 * d30v-opc.c: Removed references to FLAG_X.
2624 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2626 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2628 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2630 * Makefile.in: Added d30v object files.
2631 * configure: (bfd_d30v_arch) Rebuilt.
2632 * configure.in: (bfd_d30v_arch) Added new case.
2633 * d30v-dis.c: New file.
2634 * d30v-opc.c: New file.
2635 * disassemble.c (disassembler) Add entry for d30v.
2637 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2639 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2640 representations for the floating point BITNUM values.
2642 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2644 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2645 in the table in one's complement form, as they appear in the
2646 actual instruction.
2647 (tic80_symbol_to_value): Use macros to access predefined
2648 symbol fields.
2649 (tic80_value_to_symbol): Ditto.
2650 (tic80_next_predefined_symbol): New function.
2651 * tic80-dis.c (print_operand_bitnum): Remove code that did
2652 one's complement for BITNUM values.
2654 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2656 * makefile.vms: Remove 8 bit characters. Update to latest
2657 gcc release.
2659 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2661 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2663 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2665 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2666 (IMM24_PCREL): Likewise.
2668 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2670 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2671 address for an extended PC relative instruction that is not a
2672 branch.
2674 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2676 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2677 bytes_per_line.
2679 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2681 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2682 (tic80_opcodes): Sort entries so that long immediate forms
2683 come after short immediate forms, making it easier for
2684 assembler to select the right one for a given operand.
2686 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2688 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2689 display_endian.
2690 (print_insn_mips16): Likewise.
2692 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2694 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2695 a symbol class that restricts translation to just that
2696 class (general register, condition code, etc).
2698 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2700 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2701 and REG_DEST_E for register operands that have to be
2702 an even numbered register. Add REG_FPA for operands that
2703 are one of the floating point accumulator registers.
2704 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2705 (tic80_opcodes): Change entries that need even numbered
2706 register operands to use the new operand table entries.
2707 Add "or" entries that are identical to "or.tt" entries.
2709 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2711 * mips16-opc.c: Add new cases of exit instruction for
2712 disassembler.
2713 * mips-dis.c (print_mips16_insn_arg): Display floating point
2714 registers in operands of exit instruction. Print `$' before
2715 register names in operands of entry and exit instructions.
2717 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2719 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2720 pairs for all predefined symbols recognized by the assembler.
2721 Also used by the disassembling routines.
2722 (tic80_symbol_to_value): New function.
2723 (tic80_value_to_symbol): New function.
2724 * tic80-dis.c (print_operand_control_register,
2725 print_operand_condition_code, print_operand_bitnum):
2726 Remove private tables and use tic80_value_to_symbol function.
2728 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2730 * d10v-dis.c (print_operand): Change address printing
2731 to correctly handle PC wrapping. Fixes PR11490.
2733 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2735 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2736 branches relaxable.
2738 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2740 * mips-dis.c (print_insn_mips16): Set insn_info information.
2741 (print_mips16_insn_arg): Likewise.
2743 * mips-dis.c (print_insn_mips16): Better handling of an extend
2744 opcode followed by an instruction which can not be extended.
2746 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2748 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2749 coldfire moveb instruction to not allow an address register as
2750 destination. Although the documentation does not indicate that
2751 this is invalid, experiments uncovered unexpected behavior.
2752 Added a comment explaining the situation. Thanks to Andreas
2753 Schwab for pointing this out to me.
2755 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2757 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2758 entries are presorted so that entries with the same mnemonic are
2759 adjacent to each other in the table. Sort the entries for each
2760 instruction so that this is true.
2762 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2764 * m68k-dis.c: Include <libiberty.h>.
2765 (print_insn_m68k): Sort the opcode table on the most significant
2766 nibble of the opcode.
2768 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2770 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2771 "vsub", "vst", "xnor", and "xor" instructions.
2772 (V_a1): Renamed from V_a, msb of accumulator reg number.
2773 (V_a0): Add macro, lsb of accumulator reg number.
2775 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2777 * tic80-dis.c (print_insn_tic80): Broke excessively long
2778 function up into several smaller ones and arranged for
2779 the instruction printing function to be callable recursively
2780 to print vector instructions that have both a load and a
2781 math instruction packed into a single opcode.
2782 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2783 to explain why it comes after the other vector opcodes.
2785 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2787 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2788 move insns to handle immediate operands.
2790 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2792 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2793 fix operand mask in the "moveml" entries for the coldfire.
2795 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2797 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2798 New macros for building vector instruction opcodes.
2799 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2800 FMT_LI, which were unused. The field is now a flags field.
2801 Remove some opcodes that are possible, but illegal, such
2802 as long immediate instructions with doubles for immediate
2803 values. Add "vadd" and "vld" instructions.
2805 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2807 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2808 the order more logical. Move the shift alias instructions ("rotl",
2809 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2810 interspersed with the regular sr.x and sl.x instructions. Add
2811 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2812 "sub", "subu", "swcr", and "trap".
2814 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2816 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2817 (OFF_SL_PC): Renamed from OFF_SL.
2818 (OFF_SS_BR): New operand type for base relative operand.
2819 (OFF_SL_BR): New operand type for base relative operand.
2820 (REG_BASE): New operand type for base register operand.
2821 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2822 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2823 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2824 instructions.
2825 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2826 10 char field, padded with spaces on rhs, rather than a string
2827 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2828 than old TIC80_OPERAND_RELATIVE. Add support for new
2829 TIC80_OPERAND_BASEREL flag bit.
2831 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2833 * tic80-dis.c (print_insn_tic80): Print floating point operands
2834 as floats.
2835 * tic80-opc.c (SPFI): Add single precision floating point
2836 immediate operand type.
2837 (ROTATE): Add rotate operand type for shifts.
2838 (ENDMASK): Add for shifts.
2839 (n): Macro for the 'n' bit.
2840 (i): Macro for the 'i' bit.
2841 (PD): Macro for the 'PD' field.
2842 (P2): Macro for the 'P2' field.
2843 (P1): Macro for the 'P1' field.
2844 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2845 "fcmp", and "fdiv".
2847 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2849 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2850 adding in current address for pc-relative operands.
2852 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2854 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2855 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2856 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2857 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2858 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2859 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2860 (REG_SCALED, LSI_SCALED): New operand types.
2861 (E): New macro for 'E' bit at bit 27.
2862 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2863 opcodes, including the various size flavors (b,h,w,d) for
2864 the direct load and store instructions.
2866 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2868 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2869 in an instruction.
2870 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2871 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2872 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2873 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2874 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2875 masks with "MASK_* & ~M_*" to get the M bit reset.
2876 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2878 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2880 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2881 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2882 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2883 form.
2884 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2885 CC, SICR, and LICR table entries.
2886 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2887 "bcnd", and "brcr" opcodes.
2889 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2891 * ppc-opc.c (powerpc_operands): Make comment match the
2892 actual fields (no shift field).
2893 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2894 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2895 partial implementation, work in progress.
2896 * tic80-opc.c (tic80_operands): Begin construction operands table.
2897 (tic80_opcodes): Continue populating opcodes table and start
2898 filling in the operand indices.
2899 (tic80_num_opcodes): Add this.
2901 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2903 * m68k-opc.c: Add #B case for moveq.
2905 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2907 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2908 before they are used.
2910 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2912 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2913 for "breakpoint" instruction.
2915 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2917 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2918 (dep): Use ALL_CFLAGS rather than CFLAGS.
2920 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2922 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2923 flag.
2925 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2927 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2928 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2930 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2932 * mips16-opc.c: Add "abs".
2934 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2936 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2937 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2938 (disassembler): Add bfd_arch_tic80 support to set disassemble
2939 to print_insn_tic80.
2940 * tic80-dis.c (print_insn_tic80): Add stub.
2942 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2944 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2945 * configure: Regenerate with autoconf.
2946 * tic80-dis.c: Add file.
2947 * tic80-opc.c: Add file.
2949 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2951 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2953 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2955 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2956 (mn10200_opcodes): Use it for some logicals and btst insns.
2957 Add "break" and "trap" instructions.
2959 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2961 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2963 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2965 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2966 relative load or add now depends upon whether the instruction is
2967 in a delay slot.
2969 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2971 * mn10200-dis.c: Finish writing disassembler.
2972 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2973 Fix mask for "jmp (an)".
2975 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2976 handle endianness issues for mn10300.
2978 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2980 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2982 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2983 instruction. Fix opcode field for "movb (imm24),dn".
2985 * mn10200-opc.c (mn10200_operands): Fix insertion position
2986 for DI operand.
2988 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2990 * mn10200-opc.c: Create mn10200 opcode table.
2991 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2992 but moving along nicely.
2994 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2996 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2998 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3000 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3001 specifiers for fmovem* instructions.
3003 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3005 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3007 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3009 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3010 with dsrl.
3012 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3014 * mn10300-opc.c: Add some comments explaining the various
3015 operands and such.
3017 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3019 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3021 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3022 specifiers.
3024 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3025 operand specifiers in fmovm* instructions.
3027 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3029 * ppc-opc.c (insert_li): Give an error if the offset has the two
3030 least significant bits set.
3032 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3034 * mips-dis.c (print_insn_mips16): Separate the instruction from
3035 the arguments with a tab, not a space.
3037 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3039 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3040 register prefix.
3042 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3043 mov am,(imm32,sp).
3045 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3047 * configure: Rebuild with autoconf 2.12.
3049 Add support for mips16 (16 bit MIPS implementation):
3050 * mips16-opc.c: New file.
3051 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3052 (mips16_reg_names): New static array.
3053 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3054 after seeing a 16 bit symbol.
3055 (print_insn_little_mips): Likewise.
3056 (print_insn_mips16): New static function.
3057 (print_mips16_insn_arg): New static function.
3058 * mips-opc.c: Add jalx instruction.
3059 * Makefile.in (mips16-opc.o): New target.
3060 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3061 * configure: Rebuild.
3063 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3065 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3066 operand specifiers in *save, *restore and movem* instructions.
3068 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3069 the coldfire.
3071 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3072 register operands for immediate arithmetic, not, neg, negx, and
3073 set according to condition instructions.
3075 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3076 specifier of the effective-address operand in immediate forms of
3077 arithmetic instructions. The specifier for the immediate operand
3078 notes how and where the constant will be stored.
3080 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3082 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3083 opcode.
3085 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3086 register prefix.
3088 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3090 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3092 * mn10300-dis.c (disassemble): Handle register lists.
3094 * mn10300-opc.c: Fix handling of register list operand for
3095 "call", "ret", and "rets" instructions.
3097 * mn10300-dis.c (disassemble): Print PC-relative and memory
3098 addresses symbolically if possible.
3099 * mn10300-opc.c: Distinguish between absolute memory addresses,
3100 pc-relative offsets & random immediates.
3102 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3103 in 7 byte insns.
3104 (disassemble): Handle SPLIT and EXTENDED operands.
3106 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3108 * mn10300-dis.c: Rough cut at printing some operands.
3110 * mn10300-dis.c: Start working on disassembler support.
3111 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3113 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3114 list.
3115 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3117 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3119 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3121 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3123 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3124 register argument is calls and jmp instructions.
3126 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3128 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3129 getx operand. Fix opcode for mulqu imm,dn.
3131 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3133 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3134 in MN10300_OPERAND_SPLIT operands for how many bits
3135 appear in the basic insn word. Add IMM32_HIGH24,
3136 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3137 (mn10300_opcodes): Use new operands as needed.
3139 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3140 for bset, bclr, btst instructions.
3141 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3143 * mn10300-opc.c (mn10300_operands): Remove many redundant
3144 operands. Update opcode table as appropriate.
3145 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3146 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3148 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3150 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3151 operands (for indexed load/stores). Fix bitpos for DI
3152 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3153 few instructions that insert immediates/displacements in the
3154 middle of the instruction. Add IMM8E for 8 bit immediate in
3155 the extended part of an instruction.
3156 (mn10300_operands): Use new opcodes as appropriate.
3158 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3160 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3161 sequential so the assembler never parallelizes it with
3162 other instructions.
3164 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3166 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3167 a data/address register that appears in register field 0
3168 and register field 1.
3169 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3171 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3173 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3174 standard disassembly.
3176 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3177 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3178 Recategorize PALcode instructions.
3180 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3182 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3184 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3186 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3187 there are no operand types.
3189 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3191 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3192 changed.
3193 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3195 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3197 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3199 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3201 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3202 and sst.w instructions.
3204 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3205 "bCC"instructions).
3207 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3209 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3210 and the arguments.
3212 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3214 * ppc-opc.c (PPCPWR2): Define.
3215 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3216 it.
3218 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3220 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3221 field for movhu instruction.
3223 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3224 cast value to "long" not "signed long" to keep hpux10
3225 compiler quiet.
3227 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3229 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3230 for mov (abs16),DN.
3232 * mn10300-opc.c (FMT*): Remove definitions.
3234 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3235 for shift-by-register opcodes.
3237 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3238 into [AD][MN][01] for encoding the position of the register
3239 in the opcode.
3241 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3243 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3244 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3246 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3248 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3249 Fix various typos. Add "PAREN" operand.
3250 (MEM, MEM2): Define.
3251 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3252 operands. Fix several typos.
3254 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3255 changes.
3257 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3259 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3260 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3261 at this time.
3262 (mn10300_opcodes): Break opcode format out into its own field.
3263 Update many operand fields to deal with signed vs unsigned
3264 issues. Fix one or two typos in the "mov" instruction
3265 opcode, mask and/or operand fields.
3267 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3269 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3270 m68851 wasn't reset.
3272 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3274 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3275 all opcodes. Very rough cut at operands for all opcodes.
3277 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3278 opcode table.
3280 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3282 * mn10200-opc.c, mn10300-opc.c: New files.
3283 * mn10200-dis.c, mn10300-dis.c: New files.
3284 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3285 * disassemble.c: Break mn10x00 support into 10200 and 10300
3286 support.
3287 * configure.in: Likewise.
3288 * configure: Rebuilt.
3290 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3292 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3294 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3296 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3297 MN10x00 processors.
3298 * disassemble (ARCH_mn10x00): Define.
3299 (disassembler): Handle bfd_arch_mn10x00.
3300 * configure.in: Recognize bfd_mn10x00_arch.
3301 * configure: Rebuilt.
3303 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3305 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3306 accordingly. Don't declare functions using op_rtn.
3308 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3310 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3311 params to be more standard.
3312 * (disassemble): Print absolute addresses and symbolic names for
3313 branch and jump targets.
3314 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3315 bit operands.
3316 * (v850_opcodes): Add breakpoint insn.
3318 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3320 * m68k-opc.c: Move the fmovemx data register cases before the
3321 other cases, so that they get recognized before the data register
3322 does gets treated as a degenerate register list.
3324 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3326 * mips-opc.c: Add a case for "div" and "divu" with two registers
3327 and a destination of $0.
3329 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3331 * mips-dis.c (print_insn_arg): Add prototype.
3332 (_print_insn_mips): Ditto.
3334 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3336 * mips-dis.c (print_insn_arg): Print condition code registers as
3337 $fccN.
3339 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3341 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3343 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3345 * v850-dis.c (disassemble): Make static. Provide prototype.
3347 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3349 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3350 in range checks.
3352 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3354 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3355 ']' characters into the output stream.
3356 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3357 Add "memop" field to all opcodes (for the disassembler).
3358 Reorder opcodes so that "nop" comes before "mov" and "jr"
3359 comes before "jarl".
3361 * v850-dis.c (print_insn_v850): Fix typo in last change.
3363 * v850-dis.c (print_insn_v850): Properly handle disassembling
3364 a two byte insn at the end of a memory region when the memory
3365 region's size is only two byte aligned.
3367 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3369 * v850-dis.c (v850_reg_names): Define.
3370 (v850_sreg_names, v850_cc_names): Likewise.
3371 (disassemble): Very rough cut at printing operands (unformatted).
3373 * v850-opc.c (BOP_MASK): Fix.
3374 (v850_opcodes): Fix mask for jarl and jr.
3376 * v850-dis.c: New file. Skeleton for disassembler support.
3377 * Makefile.in Remove v850 references, they're not needed here.
3378 * configure.in: Add v850-dis.o when building v850 toolchains.
3379 * configure: Rebuilt.
3380 * disassemble.c (disassembler): Call v850 disassembler.
3382 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3383 (insert_d8_6, extract_d8_6): New functions.
3384 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3385 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3386 Add D8_6.
3387 (IF4A, IF4B): Use "D7" instead of "D7S".
3388 (IF4C, IF4D): Use "D8_7" instead of "D8".
3389 (IF4E, IF4F): New. Use "D8_6".
3390 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3391 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3393 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3394 (v850_operands): Change D16 to D16_15, use special insert/extract
3395 routines. New new D16 that uses the generic insert/extract code.
3396 (IF7A, IF7B): Use D16_15.
3397 (IF7C, IF7D): New. Use D16.
3398 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3400 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3401 message. Issue an error if the branch offset is odd.
3403 * v850-opc.c: Add notes about needing special insert/extract
3404 for all the load/store insns, except "ld.b" and "st.b".
3406 * v850-opc.c (insert_d22, extract_d22): New functions.
3407 (v850_operands): Use insert_d22 and extract_d22 for
3408 D22 operands.
3409 (insert_d9): Fix range check.
3411 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3413 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3414 and set bits field to D9 and D22 operands.
3416 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3418 * v850-opc.c (v850_operands): Define SR2 operand.
3419 (v850_opcodes): "ldsr" uses R1,SR2.
3421 * v850-opc.c (v850_opcodes): Fix opcode specs for
3422 sld.w, sst.b, sst.h, sst.w, and nop.
3424 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3426 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3427 end of the opcode table.
3429 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3431 * d10v-opc.c (pre_defined_registers): Added register pairs,
3432 "r0-r1", "r2-r3", etc.
3434 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3436 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3437 Create I16U for an unsigned 16bit mmediate operand.
3438 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3440 * v850-opc.c (v850_operands): Define EP operand.
3441 (IF4A, IF4B, IF4C, IF4D): Use EP.
3443 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3444 with immediate operand, "movhi". Tweak "ldsr".
3446 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3447 correct. Get sld.[bhw] and sst.[bhw] closer.
3449 * v850-opc.c (v850_operands): "not" is a two byte insn
3451 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3453 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3455 * v850-opc.c (two): Get order of words correct.
3457 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3459 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3460 register source and destination operands.
3461 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3463 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3464 same thinko in "trap" opcode.
3466 * v850-opc.c (v850_opcodes): Add initializer for size field
3467 on all opcodes.
3469 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3470 Add D8 for 8-bit unsigned field in short load/store insns.
3471 (IF4A, IF4D): These both need two registers.
3472 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3473 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3474 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3475 for "ldsr" and "stsr".
3476 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3477 is unsigned.
3479 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3480 short store word (sst.w).
3482 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3484 * v850-opc.c (v850_operands): Added insert and extract fields,
3485 pointers to functions that handle unusual operand encodings.
3487 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3489 * v850-opc.c (v850_opcodes): Enable "trap".
3491 * v850-opc.c (v850_opcodes): Fix order of displacement
3492 and register for "set1", "clr1", "not1", and "tst1".
3494 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3496 * v850-opc.c (v850_operands): Add "B3" support.
3497 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3498 and "tst1".
3500 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3502 * v850-opc.c: Close unterminated comment.
3504 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3506 * v850-opc.c (v850_operands): Add flags field.
3507 (v850_opcodes): add move opcodes.
3509 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3511 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3512 * configure: (bfd_v850v_arch) Add new case.
3513 * configure.in: (bfd_v850_arch) Add new case.
3514 * v850-opc.c: New file.
3516 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3518 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3520 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3522 * d10v-opc.c: Add additional information to the opcode
3523 table to help determinine which instructions can be done
3524 in parallel.
3526 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3528 * mpw-make.sed: Update editing of include pathnames to be
3529 more general.
3531 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3533 * arm-opc.h: Added "bx" instruction definition.
3535 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3537 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3539 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3541 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3543 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3545 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3547 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3549 * makefile.vms: Update for alpha-opc changes.
3551 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3553 * i386-dis.c (print_insn_i386): Actually return the correct value.
3554 (ONE, OP_ONE): #ifdef out; not used.
3556 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3558 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3559 Changed subi operand type to treat 0 as 16.
3561 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3563 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3564 <rose@netcom.com>.
3566 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3568 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3569 memory transfer instructions. Add new format string entries %h and %s.
3570 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3571 formats %h and %s.
3573 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3575 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3576 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3578 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3580 * alpha-dis.c (print_insn_alpha_osf): Remove.
3581 (print_insn_alpha_vms): Remove.
3582 (print_insn_alpha): Make globally visible. Chose the register
3583 names based on info->flavour.
3584 * disassemble.c: Always return print_insn_alpha for the alpha.
3586 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3588 * d10v-dis.c (dis_long): Handle unknown opcodes.
3590 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3592 * d10v-opc.c: Changes to support signed and unsigned numbers.
3593 All instructions with the same name that have long and short forms
3594 now end in ".l" or ".s". Divs added.
3595 * d10v-dis.c: Changes to support signed and unsigned numbers.
3597 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3599 * d10v-dis.c: Change all functions to use info->print_address_func.
3601 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3603 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3604 move ccr/sr insns more strict so that the disassembler only
3605 selects them when the addressing mode is data register.
3607 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3608 * d10v-opc.c (pre_defined_registers): Declare.
3609 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3610 to pick a better name for the registers.
3612 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3614 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3615 operands for fexpand and fpmerge. From Christian Kuehnke
3616 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3618 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3620 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3621 print routine. Take new regnames and cpumask arguments.
3622 Kill the environment variable nonsense.
3623 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3624 (print_insn_alpha_vms): New function. Do VMS style regnames.
3625 * disassemble.c (disassembler): Test bfd flavour to pick
3626 between OSF and VMS routines. Default to OSF.
3628 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3630 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3631 * configure: Rebuild.
3632 * Makefile.in (install): Use @INSTALL_SHLIB@.
3634 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3636 * configure: (bfd_d10v_arch) Add new case.
3637 * configure.in: (bfd_d10v_arch) Add new case.
3638 * d10v-dis.c: New file.
3639 * d10v-opc.c: New file.
3640 * disassemble.c (disassembler) Add entry for d10v.
3642 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3644 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3645 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3647 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3649 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3650 distinguish between variants of the instruction set.
3651 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3652 distinguish between variants of the instruction set.
3654 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3656 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3657 the 8086 instruction set.
3658 * i386-dis.c: General cleanups. Make most things static. Add
3659 prototypes. Get rid of static variables aflags and dflags. Pass
3660 them as args (to almost everything).
3662 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3664 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3666 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3668 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3669 if the next arg is marked with SRC_IN_DST. Gross.
3671 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3672 we're looking for and find EXR.
3674 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3675 if we're looking for KBIT and we don't find it.
3677 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3678 for L_3 and L_2.
3680 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3681 3bit immediate operands.
3683 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3685 * Released binutils 2.7.
3687 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3688 <kkaempf@progis.ac-net.de>.
3690 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3692 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3694 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3696 * sparc-dis.c (print_insn_sparclite): New routine to print
3697 sparclite instructions.
3699 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3701 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3703 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3705 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3706 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3707 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3709 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3711 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3712 Use autoconf-set values.
3713 (docdir, oldincludedir): Removed.
3714 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3716 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3718 * alpha-opc.c: New file.
3719 * alpha-opc.h: Remove.
3720 * alpha-dis.c: Complete rewrite to use new opcode table.
3721 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3722 * configure: Rebuild with autoconf 2.10.
3723 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3724 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3725 alpha-opc.h.
3726 (alpha-opc.o): New target.
3728 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3730 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3731 Set imm_added_to_rs1 even if the source and destination register
3732 are not the same.
3734 * sparc-opc.c: Add some two operand forms of the wr instruction.
3736 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3738 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3739 to just "mode".
3741 * disassemble.c (disassembler): Handle H8/S.
3742 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3744 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3746 * sparc-opc.c: Add beq/teq as aliases for be/te.
3748 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3749 <sergei@msil.sps.mot.com>.
3751 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3753 * makefile.vms: New file.
3755 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3757 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3759 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3760 regardless of plen.
3762 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3764 * i386-dis.c (OP_OFF): Call append_prefix.
3766 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3768 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3769 unsigned long to silence a warning from the Solaris PowerPC
3770 compiler.
3772 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3774 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3776 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3778 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3779 (X_IMM13): Delete.
3780 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3781 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3782 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3783 cpush, cpusha, cpull sparclet insns.
3785 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3787 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3789 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3791 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3792 Set F_FLOAT on other floating point instructions.
3794 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3796 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3797 registers.
3798 (powerpc_opcodes): Add 860/821 specific SPRs.
3800 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3802 * configure.in: Permit --enable-shared to specify a list of
3803 directories. Set and substitute BFD_PICLIST.
3804 * configure: Rebuild.
3805 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3806 uses. Set to @BFD_PICLIST@.
3808 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3810 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3811 not "abs", which may be needed for the absolute in something
3812 like btst #0,@10:8. Print L_3 immediates separately from other
3813 immediates. Change ABSMOV reference to ABS8MEM.
3815 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3817 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3818 (current_arch_mask): New static global.
3819 (compute_arch_mask): New static function.
3820 (print_insn_sparc): Delete sparc_v9_p. New static local
3821 current_mach. Resort opcode table if current_mach changes.
3822 Generalize "insn not supported" test.
3823 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3824 Delete test for v9/!v9.
3825 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3826 (v6notlet): Define.
3827 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3828 (brfcx): Renamed to FBRX.
3829 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3830 coprocessor mnemonics are not supported on the sparclet).
3831 (condf): Renamed to CONDF.
3832 (SLCBCC2): Delete F_ALIAS flag.
3834 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3836 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3837 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3839 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3841 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3842 that the shared library version number is set correctly.
3844 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3846 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3847 Miles Bader <miles@gnu.ai.mit.edu>.
3848 * configure: Rebuild.
3850 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3852 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3853 malloc.
3855 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3857 * configure: Rebuild with autoconf 2.8.
3859 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3861 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3862 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3864 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3866 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3867 since they appear as targets in Makefile.in.
3868 * configure: Rebuild.
3870 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3872 * mpw-make.sed: Edit out shared library support bits.
3874 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3876 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3877 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3878 (sparc_opcodes): Add sparclet insns.
3879 (sparclet_cpreg_table): New static local.
3880 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3881 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3883 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3885 * i386-dis.c (index16): New static variable.
3886 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3887 other way around.
3888 (OP_indirE): Return result of OP_E.
3889 (OP_E): Check for 16 bit addressing mode, and disassemble
3890 correctly. Optimised 32 bit case a little. Don't print
3891 "(base,index,scale)" when sib specifies only an offset.
3893 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3895 * configure.in: Set and substitute SHLIB_DEP.
3896 * configure: Rebuild.
3897 * Makefile.in (SHLIB_DEP): New variable.
3898 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3899 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3900 COMMON_SHLIB, add them to piclist with appropriate modifications.
3901 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3902 here: just use piclist.
3904 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3906 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3907 (print_insn_sparc): Rewrite v9/not-v9 tests.
3908 (compare_opcodes): Likewise.
3909 * sparc-opc.c (MASK_<ARCH>): Define.
3910 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3911 (sparclet,v6notv9): Define.
3912 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3913 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3915 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3917 * configure.in: Call AC_PROG_CC before configure.host.
3918 * configure: Rebuild.
3920 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3922 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3924 * i386-dis.c (onebyte_has_modrm): New static array.
3925 (twobyte_has_modrm): New static array.
3926 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3928 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3930 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3931 $(SHLINK).
3933 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3935 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3936 doesn't conflict.
3938 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3940 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3941 m68010up, not just m68020up | cpu32.
3943 * Makefile.in (SONAME): New variable.
3944 ($(SHLINK)): Make a link to the transformed name, as well.
3945 (stamp-tshlink): New target.
3946 (install): Skip stamp-tshlink during install.
3948 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3950 * configure.in: Call AC_ARG_PROGRAM.
3951 * configure: Rebuild.
3952 * Makefile.in (program_transform_name): New variable.
3953 (install): Transform library name before installing it.
3955 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3957 * i960-dis.c (mem): Add HX dcinva instruction.
3959 Support for building as a shared library, based on patches from
3960 Alan Modra <alan@spri.levels.unisa.edu.au>:
3961 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3962 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3963 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3964 * configure: Rebuild.
3965 * Makefile.in (ALLLIBS): New variable.
3966 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3967 (COMMON_SHLIB, SHLINK): New variables.
3968 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3969 (STAGESTUFF): Remove variable.
3970 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3971 (stamp-piclist, piclist): New targets.
3972 ($(SHLIB), $(SHLINK)): New targets.
3973 ($(OFILES)): Depend upon stamp-picdir.
3974 (disassemble.o): Build twice if PICFLAG is set.
3975 (MOSTLYCLEAN): Add pic/*.o.
3976 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3977 (distclean): Remove pic and stamp-picdir.
3978 (install): Install shared libraries.
3979 (stamp-picdir): New target.
3981 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3983 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3984 Print unknown instruction as "unknown", rather than in hex.
3986 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3988 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3990 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3992 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3994 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3996 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3997 when necessary. From Ulrich Drepper
3998 <drepper@myware.rz.uni-karlsruhe.de>.
4000 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4002 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4003 sparc_num_opcodes. Update architecture enum values.
4004 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4005 (sparc_opcode_lookup_arch): New function.
4006 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4007 (sparc_opcodes): Add v9a shutdown insn.
4009 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4011 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4012 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4013 architecture.
4014 (print_insn_sparc64): Deleted.
4015 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4016 print_insn_sparc.
4018 * sparc-opc.c (architecture_pname): Add v9a.
4020 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4022 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4023 incorrectly defined as 0x16 when it should be 0x15.
4024 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4025 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4026 excb (exception barrier) which is defined in the Alpha
4027 Architecture Handbook version 2.
4028 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4029 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4030 disassembled as or, for example.
4032 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4034 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4035 (_print_insn_mips): Change i from int to unsigned int.
4037 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4039 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4040 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4042 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4044 * i386-dis.c: Added Pentium Pro instructions.
4046 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4048 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4049 being for Power2.
4051 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4053 * sh-opc.h (sh_nibble_type): Added REG_B.
4054 (sh_arg_type): Added A_REG_B.
4055 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4056 and stc.l opcodes.
4057 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4059 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4061 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4063 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4065 * Makefile.in (distclean): Remove stamp-h. From Ronald
4066 F. Guilmette <rfg@monkeys.com>.
4068 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4070 From David Mosberger-Tang <davidm@azstarnet.com>:
4071 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4072 instruction.
4074 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4076 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4077 (sh_table): Added many SH3 opcodes.
4078 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4080 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4082 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4083 (subco,subco.): Mark this PPC, not PPCCOM.
4085 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4087 * configure: Rebuild with autoconf 2.7.
4089 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4091 * configure: Rebuild with autoconf 2.6.
4093 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4095 * configure.in: Sort list of architectures. Accept but do nothing
4096 for alliant, convex, pyramid, romp, and tahoe.
4098 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4100 * a29k-dis.c (print_special): Change num to unsigned int.
4102 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4104 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4105 shifting it.
4107 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4109 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4110 * configure: Rebuilt.
4112 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4114 * configure.in: Add case for bfd_i860_arch.
4115 * configure: Rebuild.
4117 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4119 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4120 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4121 (NEXTDOUBLE): Likewise.
4122 (print_insn_m68k): Don't match fmoveml if there is more than one
4123 register in the list.
4124 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4126 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4128 * m68k-opc.c: Use #W rather than #w.
4129 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4131 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4133 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4134 and likewise for all the dbxx opcodes.
4136 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4138 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4140 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4142 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4143 the VR4100 specific instructions to the mips_opcodes structure.
4145 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4147 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4148 ugly Metrowerks bug in CW6, is fixed in CW7.
4150 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4152 * ppc-opc.c (whole file): Add flags for common/any support.
4154 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4156 * Makefile.in (BISON): Remove macro.
4157 (FLAGS_TO_PASS): Remove BISON.
4159 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4161 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4163 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4164 instructions that take no args by looking at the match mask.
4165 (print_insn_arg): Always print "%" before register names.
4166 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4167 [case '_']: Don't print "@#" before address.
4168 [case 'J']: Use "%s" as format string, not register name.
4169 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4171 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4173 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4174 name correctly.
4176 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4178 From David Mosberger-Tang <davidm@azstarnet.com>
4180 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4181 (alpha_insn_set): added definitions for VAX floating point
4182 instructions (Unix compilers don't generate these, but handcoded
4183 assembly might still use them).
4185 * alpha-dis.c (print_insn_alpha): added support for disassembling
4186 the miscellaneous instructions in the Alpha instruction set.
4188 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4190 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4191 no longer create sysdep.h, sed ppc-opc.c to work around a
4192 serious Metrowerks C bug.
4193 * mpw-make.in: Remove.
4194 * mpw-make.sed: New file, used by mpw-configure to edit
4195 Makefile.in into an MPW makefile.
4197 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4199 * Makefile.in (maintainer-clean): New synonym for realclean.
4201 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4203 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4204 which use '0', '1', and '2' instead. Specify the proper size for
4205 a pmove immediate operand. Correct the pmovefd patterns to be
4206 moves to a register, not from a register.
4207 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4209 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4211 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4212 %psr, %wim, %tbr as F_NOTV9.
4214 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4216 * Makefile.in (Makefile): Just rebuild Makefile when running
4217 config.status.
4218 (config.h, stamp-h): New targets.
4219 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4220 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4221 rebuilding config.h.
4222 * configure: Rebuild.
4224 * mips-opc.c: Change unaligned loads and stores with "t,A"
4225 operands to use "t,A(b)".
4227 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4229 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4231 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4233 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4234 until 3 instead of until 2.
4236 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4238 * Makefile.in (ALL_CFLAGS): Define.
4239 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4240 (MOSTLYCLEAN): Add config.log.
4241 (distclean): Don't remove config.log.
4242 * configure.in: Substitute HDEFINES.
4243 * configure: Rebuild.
4245 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4247 * sh-opc.h (sh_arg_type): Add F_FR0.
4248 (sh_table, case fmac): Add F_FR0 as first argument.
4250 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4252 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4254 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4256 * sparc-dis.c: Remove all references to NO_V9.
4258 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4260 * aclocal.m4: Just include ../bfd/aclocal.m4.
4261 * configure: Rebuild.
4263 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4265 * sparc-dis.c (X_DISP19): Define.
4266 (print_insn, case 'G'): Use it.
4267 (print_insn, case 'L'): Sign extend displacement.
4269 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4271 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4272 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4273 host_makefile_frag or frags.
4274 * aclocal.m4: New file.
4275 * configure: Rebuild.
4276 * Makefile.in (INSTALL): Set to @INSTALL@.
4277 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4278 (INSTALL_DATA): Set to @INSTALL_DATA@.
4279 (AR): Set to @AR@.
4280 (AR_FLAGS): Set to rc rather than qc.
4281 (CC): Define as @CC@.
4282 (CFLAGS): Set to @CFLAGS@.
4283 (@host_makefile_frag@): Remove.
4284 (config.status): Remove dependency upon @frags@.
4286 * configure.in: ../bfd/config.bfd now just sets shell variables.
4287 Use them rather than looking through target Makefile fragments.
4288 * configure: Rebuild.
4290 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4292 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4294 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4296 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4297 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4298 sparc64 insns.
4300 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4301 (lookup_{name,value}): New functions.
4302 (prefetch_table): New static local.
4303 (sparc_{encode,decode}_prefetch): New functions.
4304 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4306 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4308 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4309 instructions.
4311 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4313 * sh-dis.c: Correct comment on first line of file.
4315 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4317 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4319 * sparc-opc.c (asi, membar): New static locals.
4320 (sparc_{encode,decode}_{asi,membar}): New functions.
4321 (sparc_opcodes, membar insn): Fix.
4322 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4323 Support decoding of membar masks.
4324 (X_MEMBAR): Define.
4326 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4328 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4330 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4332 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4333 and likewise for the other branches. Add bhs as an alias for bcc,
4334 and likewise for the size variants. Add dbhs as an alias for
4335 dbcc.
4337 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4339 * sh-opc.h (FP sts instructions): Update to match reality.
4341 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4343 * m68k-dis.c: (fpcr_names): Add % before all register names.
4344 (reg_names): Likewise.
4345 (print_insn_arg): Don't explicitly print % before register names.
4346 Add % before register names in static array names. In case 'r',
4347 print data registers as `@(Dn)', not `Dn@'. When printing a
4348 memory address, don't print @# before it.
4349 (print_indexed): Change base_disp and outer_disp from int to
4350 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4351 syntax. Sign extend 8 byte displacement correctly.
4352 (print_base): Print using MIT syntax. Print zpc when appropriate.
4353 Change parameter disp from int to bfd_vma.
4355 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4356 for jsr.
4358 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4360 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4361 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4362 * sh-opc.h (sh_arg_type): Add new operand types.
4363 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4365 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4367 * Makefile.in (distclean): Remove generated file config.h.
4369 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4371 * Makefile.in (distclean): Remove generated file config.h.
4373 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4375 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4376 Clean up tables.
4377 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4378 (opcode): Remove.
4379 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4380 rather than numopcodes. Use m68k_opcodes rather than removed
4381 opcode function. Don't check F_ALIAS.
4382 (print_insn_arg): Change first parameter to be const char *.
4383 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4384 (m68k-opc.o): New target.
4385 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4386 * configure: Rebuild.
4388 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4390 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4391 (opcode_bits, opcode_hash_table): New variables.
4392 (opcodes_initialized): Renamed from opcodes_sorted.
4393 (build_hash_table): New function.
4394 (is_delayed_branch): Use hash table.
4395 (print_insn): Renamed from print_insn_sparc, made static.
4396 Build and use hash table. If !sparc64, ignore sparc64 insns,
4397 and vice-versa if sparc64.
4398 (print_insn_sparc, print_insn_sparc64): New functions.
4399 (compare_opcodes): Move sparc64 opcodes to end.
4400 Print commutative insns with constant second.
4401 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4403 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4405 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4406 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4407 avoids printing a delay slot in a delay slot.
4408 * sh-opc.h (sh_table): Fully bracket last entry.
4410 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4412 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4414 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4416 * configure.in: Get host_makefile_frag from ${srcdir}.
4418 * configure.in: Autoconfiscated. Check for string[s].h. Create
4419 config.h from config.in. Don't set up sysdep.h link.
4420 * sysdep.h: New file.
4421 * configure, config.in: New files, generated from configure.in.
4422 * Makefile.in: Updated to be processed autoconf-style.
4423 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4424 (Makefile): Depend on config.status.
4425 (config.status): New rule.
4426 * configure.bat: Update Makefile substitutions.
4428 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4430 * mips-opc.c (L1): Define.
4431 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4432 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4433 and wb.
4435 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4437 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4438 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4439 have multiple add units but only a single logical unit.
4441 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4442 shifted by 18, without any insertion or extraction function.
4443 (insert_cr, extract_cr): Remove.
4445 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4447 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4448 register names.
4450 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4452 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4453 * sh-opc.h: Add copyright.
4455 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4457 * Makefile.in (crunch-m68k): Delete extra target accidentally
4458 checked in a while ago.
4460 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4462 * sh-opc.h (sh_table): Add SH3 support.
4464 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4466 * sh-opc.h: Added bsrf and braf.
4468 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4470 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4471 bogus [ls]fm{ea,fd} patterns.
4473 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4474 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4475 initialize it from memory. Make function static.
4476 (print_insn_{big,little}_arm): New functions.
4477 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4478 the correct endianness.
4480 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4482 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4483 enum list.
4485 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4487 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4488 17th, so that it builds again using GCC as the compiler.
4490 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4492 * mips-dis.c (print_insn_little_mips): Cast return value from
4493 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4494 expects an unsigned long, and that might be fewer words of
4495 argument storage (e.g., if bfd_vma is long long on a 32-bit
4496 machine).
4497 (print_insn_big_mips): Likewise with bfd_getb32 value.
4498 (_print_insn_mips): Now static.
4500 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4502 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4503 gcc memory hog problem with initializer is fixed.
4505 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4507 Merge in support for Mac MPW as a host.
4508 (Old change descriptions retained for informational value.)
4510 * mpw-config.in (archname): Compute from the config.
4511 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4513 * mpw-config.in (target_arch): Compute from canonical target.
4514 (m68k, mips, powerpc, sparc): Add architectures.
4515 * mpw-make.in (disassemble.c.o): Add.
4516 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4518 * mpw-config.in (BFD_MACHINES): Set to a default value.
4519 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4521 * mpw-make.in (CSEARCH): Add extra-include to search path.
4523 * mpw-config.in (varargs.h): Don't create.
4524 (sysdep.h): Create using forward-include.
4525 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4527 * mpw-config.in: New file, MPW version of configure.in.
4528 * mpw-make.in: New file, MPW version of Makefile.in.
4530 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4532 * alpha-dis.c (print_insn_alpha): Put empty statement after
4533 default label.
4535 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4537 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4538 (low_sign_extend): Likewise.
4539 (get_field): Delete unused function.
4540 (set_field, deposit_14, deposit_21): Likewise.
4542 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4544 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4545 (guy@netapp.com).
4547 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4549 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4551 * alpha-opc.h (OSF_ASMCODE): define
4552 print pal-code names as defined in App C of the
4553 Alpha Architecture Reference Manual
4555 * alpha-dis.c: cleaned up output
4556 print stylized code forms as defined in App A.4.3 of the
4557 Alpha Architecture Reference Manual
4559 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4561 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4562 `rfe'.
4563 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4564 'N', and 'M'.
4566 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4568 * m68k-dis.c (opcode): New function. Returns address of opcode
4569 table entry given index, even if the opcode table was split to
4570 work around gcc bugs.
4571 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4572 directly.
4573 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4574 (reg_names): Now const.
4575 (print_insn_arg): Arrays cacheFieldName and names now const.
4576 (print_indexed): Array scales now const.
4578 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4580 * ppc-opc.c: Sort recently added instructions by minor opcode
4581 number within major opcode number.
4583 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4585 * hppa-dis.c: Include libhppa.h.
4587 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4589 * mips-opc.c: Change dli to use M_DLI, and add dla.
4591 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4593 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4595 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4597 * mips-opc.c: Add r4650 mul instruction.
4599 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4601 * mips-opc.c: Add uld and usd macros for unaligned double load and
4602 store.
4604 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4606 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4607 mfdcr, mtdcr, icbt, iccci.
4609 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4611 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4612 signed char fields to shorts, more portable.
4614 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4616 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4617 char fields as signed chars, since they may have negative values.
4619 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4621 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4622 (mycroft@netbsd.org).
4624 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4626 From "Logg, Ed" <elogg@ea.com>:
4627 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4628 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4629 value.
4631 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4633 * ppc-opc.c: Changes based on patch from David Edelsohn
4634 <edelsohn@mhpcc.edu>.
4635 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4636 SPR.
4637 (FXM_MASK): Define.
4638 (insert_tbr): New static function.
4639 (extract_tbr): New static function.
4640 (XFXFXM_MASK, XFXM): Define.
4641 (XSPRBAT_MASK, XSPRG_MASK): Define.
4642 (powerpc_opcodes): Add instructions to access special registers by
4643 name. Add mtcr and mftbu.
4645 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4647 * mips-opc.c (P3): Define.
4648 (mips_opcodes): Add mad and madu.
4650 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4652 * configure.in: Add W65 support.
4653 * disassemble.c: Likewise.
4654 * w65-opc.h, w65-dis.c: New files.
4656 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4658 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4659 immediates.
4661 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4663 * mips-opc.c: Add dli as a synonym for li.
4665 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4667 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4668 print something for reserved opcode values, even if it won't
4669 assemble again.
4671 * mips-dis.c (_print_insn_mips): When initializing, shift right
4672 and mask, to avoid sign extension problems on the Alpha.
4674 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4675 control registers.
4677 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4679 * sh-opc.h (mov.l gbr): Get direction right.
4680 * sh-dis.c (print_insn_shx): New function.
4681 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4682 print opcodes with right byte order.
4684 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4686 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4687 to avoid conflicts with getopt.
4689 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4691 * hppa-dis.c (print_insn_hppa): Read the instruction using
4692 bfd_getb32, so that it works on a little endian or 64 bit host.
4693 Remove unused local variable op.
4695 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4697 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4698 addu does not work correctly if -mips3.
4700 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4702 * a29k-dis.c (print_special): Add special register names defined
4703 on 29030, 29040 and 29050.
4704 (print_insn): Handle new operand type 'I'.
4706 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4708 * Makefile.in (INSTALL): Use top level install.sh script.
4710 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4712 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4713 that it works on a little endian host.
4715 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4717 * configure.in: Use ${config_shell} when running config.bfd.
4719 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4721 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4723 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4725 * a29k-dis.c (print_insn): Print the opcode.
4727 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4729 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4731 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4733 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4735 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4737 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4738 which store a value into memory.
4740 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4742 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4743 * arm-dis.c, arm-opc.h: New files.
4745 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4747 * Makefile.in (ns32k-dis.o): Add dependency.
4748 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4749 string, not as array of chars.
4751 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4753 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4755 * sparc-opc.c: Added sparclite extended FP operations, and
4756 versions of v9 impdep* instructions permitting specification of
4757 the OPF field.
4759 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4761 * i960-dis.c (reg_names): Now const.
4762 (struct sparse_tabent): New type, copied from array type in mem
4763 function.
4764 (ctrl): Local static array ctrl_tab now const.
4765 (cobr): Local static array cobr_tab now const.
4766 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4767 static variable mem_tab no longer explicitly initialized. Changed
4768 mem_init to const array of struct sparse_tabent.
4769 (reg): Local static variable reg_tab no longer explicitly
4770 initialized. Changed reg_init to const array of struct
4771 sparse_tabent.
4772 (ea): Local static array scale_tab now const.
4774 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4775 (REG_MAX): Updated.
4777 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4779 * configure.bat: the disassember needs to be enabled for
4780 "objdump -d" to work in djgpp.
4782 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4784 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4785 (invalid_float): Enabled general version, doesn't require running
4786 on ns32k host. Changed to take char* argument, and test for
4787 explicitly specified sizes, instead of using sizeof() on host CPU
4788 types.
4789 (INVALID_FLOAT): Cast first argument.
4790 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4791 list_P032, list_M032): Now const.
4792 (optlist, list_search): Made appropriate arguments now point to
4793 const.
4794 (print_insn_arg): Changed static array of one-character-string
4795 pointers into a static const array of characters; fixed sprintf
4796 statement accordingly.
4798 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4800 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4801 from distribution. A ns32k-dis.c from a previous distribution has
4802 been brought up to date and supports the new interface.
4804 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4806 * configure.in: add bfd_ns32k_arch target support.
4808 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4809 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4811 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4813 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4814 disassembly right.
4816 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4818 * h8300-dis.c, mips-dis.c: Don't use true and false.
4820 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4822 * configure.in: Change --with-targets to --enable-targets.
4824 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4826 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4827 opcodes to the first instruction with that opcode, to speed
4828 disassembly of large files. From ralphc@pyramid.com (Ralph
4829 Campbell).
4831 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4833 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4835 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4837 * configure.bat: update to latest makefile.in
4839 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4841 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4842 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4843 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4844 slot insn is in a delay slot.
4845 * z8k-opc.h: (resflg): Fix patterns.
4846 * h8500-opc.h Fix CR insn patterns.
4848 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4850 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4851 "cmpl" before POWER versions, so that gas -many uses them.
4853 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4855 * disassemble.c: New file.
4856 * Makefile.in (OFILES): Add disassemble.o.
4857 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4858 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4859 binutils/configure.in.
4861 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4862 opcode being examined.
4864 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4866 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4867 (insert_ral, insert_ram, insert_ras): New functions.
4868 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4869 RAS for store with update.
4871 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4873 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4874 (edelsohn@npac.syr.edu).
4876 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4878 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4879 immediate argument.
4881 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4883 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4885 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4887 * ppc-opc.c (powerpc_operands): The signedp field has been
4888 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4889 instead. Add new operand SISIGNOPT.
4890 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4891 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4892 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4893 than signedp field.
4895 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4897 * i386-dis.c (struct private): Renamed to dis_private. `private'
4898 is a reserved word for dynix cc.
4900 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4902 * configure.in: Change error message to refer to bfd/config.bfd
4903 rather than bfd/configure.in.
4905 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4907 * ppc-opc.c: Define POWER2 as short alias flag.
4908 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4909 fsqrt.
4911 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4913 * i960-dis.c (print_insn_i960): Don't read a second word for
4914 opcodes 0, 1, 2 and 3.
4916 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4918 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4920 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4922 * m68881-ext.c: Removed; no longer used.
4923 * Makefile.in: Changed accordingly.
4925 * m68k-dis.c (ext_format_68881): Don't declare.
4926 (print_insn_m68k): If an instruction uses place 'i', it uses at
4927 least four fixed bytes.
4928 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4929 extended float, convert to double using floatformat_to_double, not
4930 ieee_extended_to_double, and fetch the data before converting it.
4932 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4934 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4935 davidj@ICSI.Berkeley.EDU (David Johnson).
4937 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4939 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4940 PowerPC uses bdnz[l][a].
4942 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4944 * dis-buf.c, i386-dis.c: Include sysdep.h.
4946 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4948 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4950 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4951 by Motorola PowerPC 601 with PPC_OPCODE_601.
4952 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4953 Disassemble Motorola PowerPC 601 instructions as well as normal
4954 PowerPC instructions.
4956 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4958 * i960-dis.c (reg, mem): Just use a static array instead of
4959 calling xmalloc.
4961 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4963 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4964 condition name index if this is for a negated condition.
4966 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4967 Floating point format for 'H' operand is backwards from normal
4968 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4969 operands (fmpyadd and fmpysub), handle bizarre register
4970 translation correctly for single precision format.
4972 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4973 or 'I' operands if the next format specifier is 'M' (fcmp
4974 condition completer).
4976 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4978 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4979 single number giving a bitmask for the MB and ME fields of an M
4980 form instruction. Change NB to accept 32, and turn it into 0;
4981 also turn 0 into 32 when disassembling. Seperated SH from NB.
4982 (insert_mbe, extract_mbe): New functions.
4983 (insert_nb, extract_nb): New functions.
4984 (SC_MASK): Mask out SA and LK bits.
4985 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4986 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4987 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4988 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4989 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4990 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4991 (powerpc_macros): Define table of macro definitions.
4992 (powerpc_num_macros): Define.
4994 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4995 if PPC_OPERAND_NEXT is set.
4997 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4999 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5000 char. Retrieve contents using bfd_getl32 instead of shifting.
5002 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5004 * ppc-opc.c: New file. Opcode table for PowerPC, including
5005 opcodes for POWER (RS/6000).
5006 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5007 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5008 (CFILES): Add ppc-dis.c.
5009 (ppc-dis.o, ppc-opc.o): New targets.
5010 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5012 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5014 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5015 No space before 'u', 'f', or 'N'.
5017 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5019 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5020 farther than we should.
5022 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5024 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5026 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5028 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5030 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5031 needs it, to prevent reading past the end of a section.
5033 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5035 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5036 Removed t,A case for la; always use t,A(b) case.
5038 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5040 From Ted Lemen <mellon@pepper.ncd.com>
5041 * mips-dis.c (print_insn_arg): Handle 'k'.
5042 * mips-opc.c: Make cache use k, not t.
5044 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5046 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5047 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5048 FLOAT_FORMAT_CODE to put out floating point register names.
5050 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5052 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5054 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5056 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5058 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5060 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5061 larger than 32. Moved dsxx32 variants first for disassembler.
5063 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5065 * z8kgen.c, z8k-opc.h: Add full lda information.
5067 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5069 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5070 movb instructions. Any necessary space will be emitted by
5071 the code to handle nullification completers.
5073 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5075 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5077 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5079 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5080 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5082 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5084 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5086 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5088 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5089 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5091 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5093 * m88k-dis.c (m88kdis): comment change. Remove space after
5094 printing mnemonic.
5095 (printop): handle new arg types DEC and XREG for m88110.
5097 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5099 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5100 type for absolute branch addresses. Delete special
5101 "ble" and "be" code in 'W' operand code.
5103 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5105 * mips-opc.c: Set hazard information correctly for branch
5106 likely instructions.
5108 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5110 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5111 info->fprintf_func for printing and info->print_address_func for
5112 address output.
5114 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5116 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5118 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5120 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5121 Corrected second case of "b" for disassembler.
5123 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5125 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5126 to BFD swapping routines to correspond to BFD name changes.
5128 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5130 * mips-opc.c: Change div machine instruction to be z,s,t rather
5131 than s,t. Change div macro to be d,v,t rather than d,s,t.
5132 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5133 rem and remu which generates only the corresponding div
5134 instruction. This is for compatibility with the MIPS assembler,
5135 which only generates the simple machine instruction when an
5136 explicit destination of $0 is used.
5137 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5139 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5141 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5142 WR_31 hazard for bal, bgezal, bltzal.
5144 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5146 * hppa-dis.c (print_insn_hppa): Use print function
5147 from within the disassemble_info, not fprintf_filtered.
5149 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5151 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5152 Law, law@cs.utah.edu.)
5154 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5156 * mips-opc.c ("absu"): Removed.
5157 ("dabs"): Added.
5159 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5161 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5162 Changed hazard information to distinguish between memory load
5163 delays and coprocessor load delays.
5165 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5167 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5169 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5171 * configure.in: Don't pass cpu to config.bfd.
5173 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5175 * m88k-dis.c (m88kdis): Make class unsigned.
5177 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5179 * alpha-dis.c (print_insn_alpha): One branch format case was
5180 missing the instruction name.
5182 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5184 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5185 Add the arch-specific auxiliary files.
5186 (OFILES): Remove the arch-specific auxiliary files
5187 and use BFD_MACHINES instead of DIS_LIBS.
5188 * configure.in: Set BFD_MACHINES based on --with-targets option.
5190 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5192 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5193 for swc1.
5195 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5197 * sparc-opc.c: Change CONST to const to deal with gcc
5198 -Dconst=__const -traditional.
5200 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5202 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5203 coprocessor instructions out of #if 0, and made them use new
5204 argument type "C".
5206 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5208 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5210 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5212 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5213 instruction, for use by the disassembler.
5215 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5216 hand-coded sign extensions that depended on 32-bit host ints.
5217 FIXME, we still depend on big-endian host bitfield ordering.
5218 (sparc_print_insn): Set the insn_info_valid field, and the
5219 other fields that describe the instruction being printed.
5221 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5223 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5224 `jmp' instead of just one of them.
5226 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5228 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5229 (fput_fp_reg_r): Renamed from fput_reg_r.
5230 (fput_fp_reg): New function.
5231 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5233 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5235 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5237 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5239 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5241 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5242 don't output a space.
5244 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5246 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5248 * mips-opc.c: New file, containing opcode table from
5249 ../include/opcode/mips.h.
5250 * Makefile.in: Add it.
5252 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5254 * m88k-dis.c: New file, moved in from gdb and changed to use the
5255 new dis-asm.h disassembler interface.
5256 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5257 (m88k-dis.o): New target.
5259 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5261 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5262 argument string const char * to correspond to opcode/mips.h.
5264 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5266 * mips-dis.c: Updated to account for name changes in new version
5267 of opcode/mips.h.
5268 * Makefile.in: Added header file dependencies.
5270 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5272 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5274 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5276 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5277 extend, rather than shifts.
5279 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5281 * Makefile.in: Undo 15 June change.
5283 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5285 * m68k-dis.c (print_insn_arg): Change return value to byte count
5286 or error code.
5287 * m68k-dis.c: Re-write to detect invalid operands before
5288 printing anything, so we can handle this the same way we
5289 handle invalid opcodes.
5291 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5293 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5295 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5297 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5298 header files.
5300 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5302 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5304 * configure.in: Do make sysdep.h link.
5305 * Makefile.in: Search ../include. Don't search ../bfd.
5307 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5309 Changes from Jeff Law, law@cs.utah.edu:
5310 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5311 Do not print a space before the completers specified by
5312 'a' and 'd'.
5314 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5316 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5317 defined, since gdb has been fixed.
5319 Changes from Jeff Law, law@cs.utah.edu:
5320 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5321 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5322 be a *disassemble_info, not a *FILE.
5323 * hppa-dis.c: Support 'd', '!', and 'a'.
5324 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5325 * hppa-dis.c: Delete cases which are no longer needed.
5327 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5329 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5331 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5333 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5334 H8/300-H opcodes.
5336 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5338 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5339 * configure.in: No longer need to configure to get sysdep.h.
5341 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5343 * Patches from Jeffrey Law <law@cs.utah.edu>.
5344 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5345 templates for 1.1 FP computational instructions.
5347 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5349 * h8500-dis.c (print_insn_h8500): Address argument is type
5350 bfd_vma.
5351 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5352 Ditto.
5354 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5355 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5357 * sparc-dis.c (compare_opcodes): Move static declaration to
5358 top-level.
5360 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5362 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5363 instruction, remove unimp hack from 'l' argument.
5365 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5367 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5368 happy.
5370 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5372 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5373 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5374 instructions.
5376 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5378 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5379 arrays of string pointers to 2-d arrays of chars, to save
5380 space.
5382 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5384 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5385 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5387 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5389 * hppa-dis.c: New file from Utah, adapted to new disassembler
5390 calling interface.
5391 * Makefile.in: Include it.
5393 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5395 * sh-dis.c, sh-opc.h: New files.
5397 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5399 * alpha-dis.c, alpha-opc.h: New files.
5401 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5403 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5404 value.
5406 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5408 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5410 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5412 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5413 const.
5415 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5417 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5418 and double percent signs a few places.
5420 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5422 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5423 Use info->print_address_func not print_address.
5425 * dis-buf.c (generic_print_address): New function.
5427 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5429 * Makefile.in: Add sparc-dis.c.
5430 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5431 From GDB:
5432 Add `add' instruction to the set that get checked
5433 for a preceding `sethi' in order to print an absolute address.
5434 * (print_insn): Disassembly prefers real instructions.
5435 (is_delayed_branch): Speed up.
5436 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5437 Still missing some float ops, and needs testing.
5438 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5439 F_ALIAS. Use printf, not fprintf, when not passing a file
5440 pointer...
5441 (compare_opcodes): Check that identical instructions have
5442 identical opcodes, complain otherwise.
5443 From binutils:
5444 * New 'm' arg.
5445 * Include reg_names.
5446 From neither:
5447 Use dis-asm.h/read_memory_func interface.
5449 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5451 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5452 deliberately return non-zero to setjmp from longjmp. Otherwise
5453 this code fails to compile.
5455 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5457 * m68k-dis.c: Fix prototype for fetch_arg().
5459 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5461 * dis-buf.c: New file, for new read_memory_func interface.
5462 Makefile.in (OFILES): Include it.
5463 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5464 Use new read_memory_func interface.
5466 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5468 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5469 * h8500-opc.h: Fix couple of opcodes.
5471 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5473 * Makefile.in: add dvi & installcheck targets
5475 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5477 * Makefile.in: Update for h8500-dis.c.
5479 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5481 * h8500-dis.c, h8500-opc.h: New files
5483 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5485 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5486 ../include/dis-asm.h.
5487 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5488 and ../gdb/m68k-pinsn.c).
5489 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5490 and ../gdb/i386-pinsn.c).
5491 * m68881-ext.c: New file. Moved definition of
5492 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5493 * Makefile.in: Adjust for new files.
5494 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5495 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5496 can be dis-assembled.
5498 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5500 * mips-dis.c (print_insn_arg): Now returns void.
5502 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5504 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5505 files that use the macros.
5507 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5509 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5510 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5511 (CFILES): Added mips-dis.c.
5513 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5515 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5516 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5518 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5520 * Makefile.in: Improve *clean rules.
5521 * configure.in: Allow a default host.
5523 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5525 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5526 files include other sysdep files
5528 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5530 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5532 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5534 * configure.in: For host support, use ../bfd/configure.host
5535 so it stays in sync with the ../bfd/hosts database.
5537 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5539 * configure.in: use cpu-vendor-os triple instead of nested cases
5541 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5543 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5544 *always* the wrong one.
5546 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5548 * z8kgen.c: added copyright info
5550 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5552 * z8k-dis.c (unparse_instr): prettier tabs
5553 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5555 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5557 * configure.in: Add ncr* configuration.
5558 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5559 picayune ANSI compilers happy.
5561 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5563 * configure.in (i386): Make i386 and i486 synonymous for now.
5564 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5566 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5568 * Makefile.in (install): Fix typo.
5570 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5572 * Makefile.in (make): Remove obsolete crud.
5573 (sparc-opc.o): Avoid Sun Make VPATH bug.
5575 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5577 * Makefile.in: since there are no SUBDIRS, remove rule and
5578 references of subdir_do.
5580 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5582 * Makefile.in (install): Get the library name right here too.
5583 Don't install bfd.h, since it's unrelated to this library. No
5584 subdirs to recurse into, either.
5585 (CFILES): The source file has a .c suffix, not .o.
5587 * sparc-opc.c: New file, moved from BFD.
5588 * Makefile.in (OFILES): Build it.
5590 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5592 * z8k-dis.c: fixed forward refferences of some declarations.
5594 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5596 * Makefile.in: get the name of the library right
5598 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5600 * z8k-dis.c: knows how to disassemble z8k stuff
5601 * z8k-opc.h: new file full of z8000 opcodes
5603 \f
5604 Local Variables:
5605 version-control: never
5606 End: