* Makefile.am (BFD32_BACKENDS): Remove elfarmqnx-nabi.lo,
[binutils.git] / bfd / coff-stgo32.c
blob5d867ea40b923e7fb7552934278fcd34126e215c
1 /* BFD back-end for Intel 386 COFF files (DJGPP variant with a stub).
2 Copyright 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
3 Written by Robert Hoehne.
5 This file is part of BFD, the Binary File Descriptor library.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
21 /* This file handles now also stubbed coff images. The stub is a small
22 DOS executable program before the coff image to load it in memory
23 and execute it. This is needed, because DOS cannot run coff files.
25 All the functions below are called by the corresponding functions
26 from coffswap.h.
27 The only thing what they do is to adjust the information stored in
28 the COFF file which are offset into the file.
29 This is needed, because DJGPP uses a very special way to load and run
30 the coff image. It loads the image in memory and assumes then, that the
31 image had no stub by using the filepointers as pointers in the coff
32 image and NOT in the file.
34 To be compatible with any existing executables I have fixed this
35 here and NOT in the DJGPP startup code.
38 #define TARGET_SYM go32stubbedcoff_vec
39 #define TARGET_NAME "coff-go32-exe"
40 #define TARGET_UNDERSCORE '_'
41 #define COFF_GO32_EXE
42 #define COFF_LONG_SECTION_NAMES
43 #define COFF_SUPPORT_GNU_LINKONCE
44 #define COFF_LONG_FILENAMES
46 #define COFF_SECTION_ALIGNMENT_ENTRIES \
47 { COFF_SECTION_NAME_EXACT_MATCH (".data"), \
48 COFF_ALIGNMENT_FIELD_EMPTY, COFF_ALIGNMENT_FIELD_EMPTY, 4 }, \
49 { COFF_SECTION_NAME_EXACT_MATCH (".text"), \
50 COFF_ALIGNMENT_FIELD_EMPTY, COFF_ALIGNMENT_FIELD_EMPTY, 4 }, \
51 { COFF_SECTION_NAME_PARTIAL_MATCH (".debug"), \
52 COFF_ALIGNMENT_FIELD_EMPTY, COFF_ALIGNMENT_FIELD_EMPTY, 0 }, \
53 { COFF_SECTION_NAME_PARTIAL_MATCH (".gnu.linkonce.wi"), \
54 COFF_ALIGNMENT_FIELD_EMPTY, COFF_ALIGNMENT_FIELD_EMPTY, 0 }
56 #include "bfd.h"
58 /* At first the prototypes */
60 static void
61 adjust_filehdr_in_post PARAMS ((bfd * abfd, PTR src, PTR dst));
62 static void
63 adjust_filehdr_out_pre PARAMS ((bfd * abfd, PTR in, PTR out));
64 static void
65 adjust_filehdr_out_post PARAMS ((bfd * abfd, PTR in, PTR out));
67 static void
68 adjust_scnhdr_in_post PARAMS ((bfd * abfd, PTR ext, PTR in));
69 static void
70 adjust_scnhdr_out_pre PARAMS ((bfd * abfd, PTR in, PTR out));
71 static void
72 adjust_scnhdr_out_post PARAMS ((bfd * abfd, PTR in, PTR out));
74 static void
75 adjust_aux_in_post PARAMS ((bfd * abfd, PTR ext1, int type, int class, int indx,
76 int numaux, PTR in1));
77 static void
78 adjust_aux_out_pre PARAMS ((bfd * abfd, PTR inp, int type, int class, int indx,
79 int numaux, PTR extp));
80 static void
81 adjust_aux_out_post PARAMS ((bfd * abfd, PTR inp, int type, int class, int indx,
82 int numaux, PTR extp));
84 static void
85 create_go32_stub PARAMS ((bfd * abfd));
88 All that ..._PRE and ...POST functions are called from the corresponding
89 coff_swap... functions. The ...PRE functions are called at the beginning
90 of the function and the ...POST functions at the end of the swap routines.
93 #define COFF_ADJUST_FILEHDR_IN_POST adjust_filehdr_in_post
94 #define COFF_ADJUST_FILEHDR_OUT_PRE adjust_filehdr_out_pre
95 #define COFF_ADJUST_FILEHDR_OUT_POST adjust_filehdr_out_post
97 #define COFF_ADJUST_SCNHDR_IN_POST adjust_scnhdr_in_post
98 #define COFF_ADJUST_SCNHDR_OUT_PRE adjust_scnhdr_out_pre
99 #define COFF_ADJUST_SCNHDR_OUT_POST adjust_scnhdr_out_post
101 #define COFF_ADJUST_AUX_IN_POST adjust_aux_in_post
102 #define COFF_ADJUST_AUX_OUT_PRE adjust_aux_out_pre
103 #define COFF_ADJUST_AUX_OUT_POST adjust_aux_out_post
105 static boolean
106 go32_stubbed_coff_bfd_copy_private_bfd_data PARAMS ((bfd * ibfd, bfd * obfd));
108 #define coff_bfd_copy_private_bfd_data go32_stubbed_coff_bfd_copy_private_bfd_data
110 #include "coff-i386.c"
112 /* I hold in the usrdata the stub */
113 #define bfd_coff_go32stub bfd_usrdata
115 /* This macro is used, because I cannot assume the endianess of the
116 host system */
117 #define _H(index) (H_GET_16 (abfd, (header+index*2)))
119 /* These bytes are a 2048-byte DOS executable, which loads the COFF
120 image into memory and then runs it. It is called 'stub' */
122 static unsigned char stub_bytes[STUBSIZE] =
124 #include "go32stub.h"
128 I have not commented each swap function below, because the
129 technique is in any function the same. For the ...in function,
130 all the pointers are adjusted by adding STUBSIZE and for the
131 ...out function, it is subtracted first and after calling the
132 standard swap function it is reset to the old value */
134 /* This macro is used for adjusting the filepointers, which
135 is done only, if the pointer is nonzero */
137 #define ADJUST_VAL(val,diff) \
138 if (val != 0) val += diff
140 static void
141 adjust_filehdr_in_post (abfd, src, dst)
142 bfd *abfd;
143 PTR src;
144 PTR dst;
146 FILHDR *filehdr_src = (FILHDR *) src;
147 struct internal_filehdr *filehdr_dst = (struct internal_filehdr *) dst;
149 ADJUST_VAL (filehdr_dst->f_symptr, STUBSIZE);
151 /* Save now the stub to be used later */
152 bfd_coff_go32stub (abfd) = (PTR) bfd_alloc (abfd, (bfd_size_type) STUBSIZE);
154 /* Since this function returns no status, I do not set here
155 any bfd_error_...
156 That means, before the use of bfd_coff_go32stub (), this value
157 should be checked if it is != NULL */
158 if (bfd_coff_go32stub (abfd) == NULL)
159 return;
160 memcpy (bfd_coff_go32stub (abfd), filehdr_src->stub, STUBSIZE);
163 static void
164 adjust_filehdr_out_pre (abfd, in, out)
165 bfd *abfd;
166 PTR in;
167 PTR out;
169 struct internal_filehdr *filehdr_in = (struct internal_filehdr *) in;
170 FILHDR *filehdr_out = (FILHDR *) out;
172 /* Generate the stub */
173 create_go32_stub (abfd);
175 /* Copy the stub to the file header */
176 if (bfd_coff_go32stub (abfd) != NULL)
177 memcpy (filehdr_out->stub, bfd_coff_go32stub (abfd), STUBSIZE);
178 else
179 /* use the default */
180 memcpy (filehdr_out->stub, stub_bytes, STUBSIZE);
182 ADJUST_VAL (filehdr_in->f_symptr, -STUBSIZE);
185 static void
186 adjust_filehdr_out_post (abfd, in, out)
187 bfd *abfd ATTRIBUTE_UNUSED;
188 PTR in;
189 PTR out ATTRIBUTE_UNUSED;
191 struct internal_filehdr *filehdr_in = (struct internal_filehdr *) in;
192 /* undo the above change */
193 ADJUST_VAL (filehdr_in->f_symptr, STUBSIZE);
196 static void
197 adjust_scnhdr_in_post (abfd, ext, in)
198 bfd *abfd ATTRIBUTE_UNUSED;
199 PTR ext ATTRIBUTE_UNUSED;
200 PTR in;
202 struct internal_scnhdr *scnhdr_int = (struct internal_scnhdr *) in;
204 ADJUST_VAL (scnhdr_int->s_scnptr, STUBSIZE);
205 ADJUST_VAL (scnhdr_int->s_relptr, STUBSIZE);
206 ADJUST_VAL (scnhdr_int->s_lnnoptr, STUBSIZE);
209 static void
210 adjust_scnhdr_out_pre (abfd, in, out)
211 bfd *abfd ATTRIBUTE_UNUSED;
212 PTR in;
213 PTR out ATTRIBUTE_UNUSED;
215 struct internal_scnhdr *scnhdr_int = (struct internal_scnhdr *) in;
217 ADJUST_VAL (scnhdr_int->s_scnptr, -STUBSIZE);
218 ADJUST_VAL (scnhdr_int->s_relptr, -STUBSIZE);
219 ADJUST_VAL (scnhdr_int->s_lnnoptr, -STUBSIZE);
222 static void
223 adjust_scnhdr_out_post (abfd, in, out)
224 bfd *abfd ATTRIBUTE_UNUSED;
225 PTR in;
226 PTR out ATTRIBUTE_UNUSED;
228 struct internal_scnhdr *scnhdr_int = (struct internal_scnhdr *) in;
230 ADJUST_VAL (scnhdr_int->s_scnptr, STUBSIZE);
231 ADJUST_VAL (scnhdr_int->s_relptr, STUBSIZE);
232 ADJUST_VAL (scnhdr_int->s_lnnoptr, STUBSIZE);
235 static void
236 adjust_aux_in_post (abfd, ext1, type, class, indx, numaux, in1)
237 bfd *abfd ATTRIBUTE_UNUSED;
238 PTR ext1 ATTRIBUTE_UNUSED;
239 int type;
240 int class;
241 int indx ATTRIBUTE_UNUSED;
242 int numaux ATTRIBUTE_UNUSED;
243 PTR in1;
245 union internal_auxent *in = (union internal_auxent *) in1;
247 if (class == C_BLOCK || class == C_FCN || ISFCN (type) || ISTAG (class))
249 ADJUST_VAL (in->x_sym.x_fcnary.x_fcn.x_lnnoptr, STUBSIZE);
253 static void
254 adjust_aux_out_pre (abfd, inp, type, class, indx, numaux, extp)
255 bfd *abfd ATTRIBUTE_UNUSED;
256 PTR inp;
257 int type;
258 int class;
259 int indx ATTRIBUTE_UNUSED;
260 int numaux ATTRIBUTE_UNUSED;
261 PTR extp ATTRIBUTE_UNUSED;
263 union internal_auxent *in = (union internal_auxent *) inp;
265 if (class == C_BLOCK || class == C_FCN || ISFCN (type) || ISTAG (class))
267 ADJUST_VAL (in->x_sym.x_fcnary.x_fcn.x_lnnoptr, -STUBSIZE);
271 static void
272 adjust_aux_out_post (abfd, inp, type, class, indx, numaux, extp)
273 bfd *abfd ATTRIBUTE_UNUSED;
274 PTR inp;
275 int type;
276 int class;
277 int indx ATTRIBUTE_UNUSED;
278 int numaux ATTRIBUTE_UNUSED;
279 PTR extp ATTRIBUTE_UNUSED;
281 union internal_auxent *in = (union internal_auxent *) inp;
283 if (class == C_BLOCK || class == C_FCN || ISFCN (type) || ISTAG (class))
285 ADJUST_VAL (in->x_sym.x_fcnary.x_fcn.x_lnnoptr, STUBSIZE);
290 That's the function, which creates the stub. There are
291 different cases from where the stub is taken.
292 At first the environment variable $(GO32STUB) is checked and then
293 $(STUB) if it was not set.
294 If it exists and points to a valid stub the stub is taken from
295 that file. This file can be also a whole executable file, because
296 the stub is computed from the exe information at the start of that
297 file.
299 If there was any error, the standard stub (compiled in this file)
300 is taken.
303 static void
304 create_go32_stub (abfd)
305 bfd *abfd;
307 /* Do it only once */
308 if (bfd_coff_go32stub (abfd) == NULL)
310 char *stub;
311 struct stat st;
312 int f;
313 unsigned char header[10];
314 char magic[8];
315 unsigned long coff_start;
316 long exe_start;
318 /* Check at first the environment variable $(GO32STUB) */
319 stub = getenv ("GO32STUB");
320 /* Now check the environment variable $(STUB) */
321 if (stub == NULL)
322 stub = getenv ("STUB");
323 if (stub == NULL)
324 goto stub_end;
325 if (stat (stub, &st) != 0)
326 goto stub_end;
327 #ifdef O_BINARY
328 f = open (stub, O_RDONLY | O_BINARY);
329 #else
330 f = open (stub, O_RDONLY);
331 #endif
332 if (f < 0)
333 goto stub_end;
334 if (read (f, &header, sizeof (header)) < 0)
336 close (f);
337 goto stub_end;
339 if (_H (0) != 0x5a4d) /* it is not an exe file */
341 close (f);
342 goto stub_end;
344 /* Compute the size of the stub (it is every thing up
345 to the beginning of the coff image) */
346 coff_start = (long) _H (2) * 512L;
347 if (_H (1))
348 coff_start += (long) _H (1) - 512L;
350 /* Currently there is only a fixed stub size of 2048 bytes
351 supported */
352 if (coff_start != 2048)
354 close (f);
355 goto stub_end;
357 exe_start = _H (4) * 16;
358 if ((long) lseek (f, exe_start, SEEK_SET) != exe_start)
360 close (f);
361 goto stub_end;
363 if (read (f, &magic, 8) != 8)
365 close (f);
366 goto stub_end;
368 if (memcmp (magic, "go32stub", 8) != 0)
370 close (f);
371 goto stub_end;
373 /* Now we found a correct stub (hopefully) */
374 bfd_coff_go32stub (abfd)
375 = (PTR) bfd_alloc (abfd, (bfd_size_type) coff_start);
376 if (bfd_coff_go32stub (abfd) == NULL)
378 close (f);
379 return;
381 lseek (f, 0L, SEEK_SET);
382 if ((unsigned long) read (f, bfd_coff_go32stub (abfd), coff_start)
383 != coff_start)
385 bfd_release (abfd, bfd_coff_go32stub (abfd));
386 bfd_coff_go32stub (abfd) = NULL;
388 close (f);
390 stub_end:
391 /* There was something wrong above, so use now the standard builtin
392 stub */
393 if (bfd_coff_go32stub (abfd) == NULL)
395 bfd_coff_go32stub (abfd)
396 = (PTR) bfd_alloc (abfd, (bfd_size_type) STUBSIZE);
397 if (bfd_coff_go32stub (abfd) == NULL)
399 return;
402 memcpy (bfd_coff_go32stub (abfd), stub_bytes, STUBSIZE);
406 /* If ibfd was a stubbed coff image, copy the stub from that bfd
407 to the new obfd.
410 static boolean
411 go32_stubbed_coff_bfd_copy_private_bfd_data (ibfd, obfd)
412 bfd *ibfd;
413 bfd *obfd;
415 /* check if both are the same targets */
416 if (ibfd->xvec != obfd->xvec)
417 return true;
419 /* check if both have a valid stub */
420 if (bfd_coff_go32stub (ibfd) == NULL
421 || bfd_coff_go32stub (obfd) == NULL)
422 return true;
424 /* Now copy the stub */
425 memcpy (bfd_coff_go32stub (obfd), bfd_coff_go32stub (ibfd), STUBSIZE);
427 return true;