1 /* BFD back-end for WDC 65816 COFF binaries.
2 Copyright 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004
3 Free Software Foundation, Inc.
4 Written by Steve Chamberlain, <sac@cygnus.com>.
6 This file is part of BFD, the Binary File Descriptor library.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
27 #include "coff/internal.h"
30 static int select_reloc
PARAMS ((reloc_howto_type
*));
31 static void rtype2howto
PARAMS ((arelent
*, struct internal_reloc
*));
32 static void reloc_processing
PARAMS ((arelent
*, struct internal_reloc
*, asymbol
**, bfd
*, asection
*));
33 static int w65_reloc16_estimate
PARAMS ((bfd
*, asection
*, arelent
*, unsigned int, struct bfd_link_info
*));
34 static void w65_reloc16_extra_cases
PARAMS ((bfd
*,struct bfd_link_info
*, struct bfd_link_order
*, arelent
*, bfd_byte
*, unsigned int *, unsigned int *));
36 #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
37 static reloc_howto_type howto_table
[] =
39 HOWTO (R_W65_ABS8
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, "abs8", TRUE
, 0x000000ff, 0x000000ff, FALSE
),
40 HOWTO (R_W65_ABS16
, 1, 0, 16, FALSE
, 0, complain_overflow_bitfield
, 0, "abs16", TRUE
, 0x0000ffff, 0x0000ffff, FALSE
),
41 HOWTO (R_W65_ABS24
, 0, 2, 32, FALSE
, 0, complain_overflow_bitfield
, 0, "abs24", TRUE
, 0x00ffffff, 0x00ffffff, FALSE
),
42 HOWTO (R_W65_ABS8S8
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, ">abs8", TRUE
, 0x000000ff, 0x000000ff, FALSE
),
43 HOWTO (R_W65_ABS8S16
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, "^abs8", TRUE
, 0x000000ff, 0x000000ff, FALSE
),
44 HOWTO (R_W65_ABS16S8
, 1, 0, 16, FALSE
, 0, complain_overflow_bitfield
, 0, ">abs16", TRUE
, 0x0000ffff, 0x0000ffff, FALSE
),
45 HOWTO (R_W65_ABS16S16
,1, 0, 16, FALSE
, 0, complain_overflow_bitfield
, 0, "^abs16", TRUE
, 0x0000ffff, 0x0000ffff, FALSE
),
46 HOWTO (R_W65_PCR8
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, "pcrel8", TRUE
, 0x000000ff, 0x000000ff, TRUE
),
47 HOWTO (R_W65_PCR16
, 1, 0, 16, FALSE
, 0, complain_overflow_bitfield
, 0, "pcrel16", TRUE
, 0x0000ffff, 0x0000ffff, TRUE
),
48 HOWTO (R_W65_DP
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, "dp", TRUE
, 0x000000ff, 0x000000ff, FALSE
),
51 /* Turn a howto into a reloc number. */
53 #define SELECT_RELOC(x,howto) \
54 { x.r_type = select_reloc(howto); }
56 #define BADMAG(x) (W65BADMAG(x))
57 #define W65 1 /* Customize coffcode.h */
58 #define __A_MAGIC_SET__
60 /* Code to swap in the reloc */
61 #define SWAP_IN_RELOC_OFFSET H_GET_32
62 #define SWAP_OUT_RELOC_OFFSET H_PUT_32
63 #define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
64 dst->r_stuff[0] = 'S'; \
65 dst->r_stuff[1] = 'C';
69 reloc_howto_type
*howto
;
74 /* Code to turn a r_type into a howto ptr, uses the above howto table. */
77 rtype2howto (internal
, dst
)
79 struct internal_reloc
*dst
;
81 internal
->howto
= howto_table
+ dst
->r_type
- 1;
84 #define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
86 /* Perform any necessary magic to the addend in a reloc entry. */
88 #define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
89 cache_ptr->addend = ext_reloc.r_offset;
91 #define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
92 reloc_processing(relent, reloc, symbols, abfd, section)
95 reloc_processing (relent
, reloc
, symbols
, abfd
, section
)
97 struct internal_reloc
*reloc
;
102 relent
->address
= reloc
->r_vaddr
;
103 rtype2howto (relent
, reloc
);
105 if (((int) reloc
->r_symndx
) > 0)
106 relent
->sym_ptr_ptr
= symbols
+ obj_convert (abfd
)[reloc
->r_symndx
];
108 relent
->sym_ptr_ptr
= (asymbol
**)&(bfd_abs_symbol
);
110 relent
->addend
= reloc
->r_offset
;
112 relent
->address
-= section
->vma
;
113 /* relent->section = 0;*/
117 w65_reloc16_estimate (abfd
, input_section
, reloc
, shrink
, link_info
)
119 asection
*input_section
;
122 struct bfd_link_info
*link_info
;
128 /* The address of the thing to be relocated will have moved back by
129 the size of the shrink - but we don't change reloc->address here,
130 since we need it to know where the relocation lives in the source
133 /* reloc->address -= shrink; conceptual */
135 bfd_vma address
= reloc
->address
- shrink
;
137 switch (reloc
->howto
->type
)
144 /* Thing is a move one byte. */
146 value
= bfd_coff_reloc16_get_value (reloc
, link_info
, input_section
);
150 /* Change the reloc type from 16bit, possible 8 to 8bit
152 reloc
->howto
= reloc
->howto
+ 1;
153 /* The place to relc moves back by one. */
154 /* This will be two bytes smaller in the long run. */
156 bfd_perform_slip (abfd
, 2, input_section
, address
);
160 /* This is the 24 bit branch which could become an 8 bitter,
161 the relocation points to the first byte of the insn, not the
165 value
= bfd_coff_reloc16_get_value (reloc
, link_info
, input_section
);
167 dot
= input_section
->output_section
->vma
+
168 input_section
->output_offset
+ address
;
170 /* See if the address we're looking at within 127 bytes of where
171 we are, if so then we can use a small branch rather than the
172 jump we were going to. */
175 if (-120 < (long) gap
&& (long) gap
< 120)
177 /* Change the reloc type from 24bit, possible 8 to 8bit
179 reloc
->howto
= reloc
->howto
+ 1;
180 /* This will be two bytes smaller in the long run. */
182 bfd_perform_slip (abfd
, 2, input_section
, address
);
187 value
= bfd_coff_reloc16_get_value (reloc
, link_info
, input_section
);
189 dot
= input_section
->output_section
->vma
+
190 input_section
->output_offset
+ address
;
192 /* See if the address we're looking at within 127 bytes of where
193 we are, if so then we can use a small branch rather than the
194 jump we were going to. */
195 gap
= value
- (dot
- shrink
);
197 if (-120 < (long) gap
&& (long) gap
< 120)
199 /* Change the reloc type from 16bit, possible 8 to 8bit
201 reloc
->howto
= reloc
->howto
+ 1;
202 /* The place to relc moves back by one. */
204 /* This will be two bytes smaller in the long run. */
206 bfd_perform_slip (abfd
, 2, input_section
, address
);
214 /* First phase of a relaxing link. */
218 R_MOV16B1 R_MOV16B2 mov.b with 16bit or 8 bit address
219 R_JMP1 R_JMP2 jmp or pcrel branch
220 R_JMPL1 R_JMPL_B8 24jmp or pcrel branch
221 R_MOV24B1 R_MOV24B2 24 or 8 bit reloc for mov.b */
224 w65_reloc16_extra_cases (abfd
, link_info
, link_order
, reloc
, data
, src_ptr
,
227 struct bfd_link_info
*link_info
;
228 struct bfd_link_order
*link_order
;
231 unsigned int *src_ptr
;
232 unsigned int *dst_ptr
;
234 unsigned int src_address
= *src_ptr
;
235 unsigned int dst_address
= *dst_ptr
;
236 asection
*input_section
= link_order
->u
.indirect
.section
;
238 switch (reloc
->howto
->type
)
243 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
245 bfd_put_8 (abfd
, gap
, data
+ dst_address
);
253 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
256 bfd_put_8 (abfd
, gap
, data
+ dst_address
);
264 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
267 bfd_put_8 (abfd
, gap
, data
+ dst_address
);
275 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
278 bfd_put_16 (abfd
, (bfd_vma
) gap
, data
+ dst_address
);
285 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
288 bfd_put_16 (abfd
, (bfd_vma
) gap
, data
+ dst_address
);
295 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
298 bfd_put_16 (abfd
, (bfd_vma
) gap
, data
+ dst_address
);
306 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
308 bfd_put_16 (abfd
, (bfd_vma
) gap
, data
+ dst_address
);
309 bfd_put_8 (abfd
, gap
>> 16, data
+dst_address
+ 2);
317 int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
319 bfd_vma dot
= link_order
->offset
321 + link_order
->u
.indirect
.section
->output_section
->vma
;
324 if (gap
< -128 || gap
> 127)
326 if (! ((*link_info
->callbacks
->reloc_overflow
)
328 bfd_asymbol_name (*reloc
->sym_ptr_ptr
),
329 reloc
->howto
->name
, reloc
->addend
, input_section
->owner
,
330 input_section
, reloc
->address
)))
333 bfd_put_8 (abfd
, gap
, data
+ dst_address
);
341 bfd_vma gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
343 bfd_vma dot
= link_order
->offset
345 + link_order
->u
.indirect
.section
->output_section
->vma
;
347 /* This wraps within the page, so ignore the relativeness, look at the
349 if ((gap
& 0xf0000) != (dot
& 0xf0000))
351 if (! ((*link_info
->callbacks
->reloc_overflow
)
353 bfd_asymbol_name (*reloc
->sym_ptr_ptr
),
354 reloc
->howto
->name
, reloc
->addend
, input_section
->owner
,
355 input_section
, reloc
->address
)))
360 bfd_put_16 (abfd
, gap
, data
+ dst_address
);
366 printf (_("ignoring reloc %s\n"), reloc
->howto
->name
);
370 *src_ptr
= src_address
;
371 *dst_ptr
= dst_address
;
374 #define coff_reloc16_extra_cases w65_reloc16_extra_cases
375 #define coff_reloc16_estimate w65_reloc16_estimate
377 #include "coffcode.h"
379 #undef coff_bfd_get_relocated_section_contents
380 #undef coff_bfd_relax_section
381 #define coff_bfd_get_relocated_section_contents \
382 bfd_coff_reloc16_get_relocated_section_contents
383 #define coff_bfd_relax_section bfd_coff_reloc16_relax_section
385 CREATE_LITTLE_COFF_TARGET_VEC (w65_vec
, "coff-w65", BFD_IS_RELAXABLE
, 0, '_', NULL
, COFF_SWAP_TABLE
)