bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  22    MA 02110-1301, USA.  */
  23
  24 /*
  25 SECTION
  26         Relocations
  27
  28         BFD maintains relocations in much the same way it maintains
  29         symbols: they are left alone until required, then read in
  30         en-masse and translated into an internal form.  A common
  31         routine <<bfd_perform_relocation>> acts upon the
  32         canonical form to do the fixup.
  33
  34         Relocations are maintained on a per section basis,
  35         while symbols are maintained on a per BFD basis.
  36
  37         All that a back end has to do to fit the BFD interface is to create
  38         a <<struct reloc_cache_entry>> for each relocation
  39         in a particular section, and fill in the right bits of the structures.
  40
  41 @menu
  42 @* typedef arelent::
  43 @* howto manager::
  44 @end menu
  45
  46 */
  47
  48 /* DO compile in the reloc_code name table from libbfd.h.  */
  49 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  50
  51 #include "sysdep.h"
  52 #include "bfd.h"
  53 #include "bfdlink.h"
  54 #include "libbfd.h"
  55 /*
  56 DOCDD
  57 INODE
  58         typedef arelent, howto manager, Relocations, Relocations
  59
  60 SUBSECTION
  61         typedef arelent
  62
  63         This is the structure of a relocation entry:
  64
  65 CODE_FRAGMENT
  66 .
  67 .typedef enum bfd_reloc_status
  68 .{
  69 .  {* No errors detected.  *}
  70 .  bfd_reloc_ok,
  71 .
  72 .  {* The relocation was performed, but there was an overflow.  *}
  73 .  bfd_reloc_overflow,
  74 .
  75 .  {* The address to relocate was not within the section supplied.  *}
  76 .  bfd_reloc_outofrange,
  77 .
  78 .  {* Used by special functions.  *}
  79 .  bfd_reloc_continue,
  80 .
  81 .  {* Unsupported relocation size requested.  *}
  82 .  bfd_reloc_notsupported,
  83 .
  84 .  {* Unused.  *}
  85 .  bfd_reloc_other,
  86 .
  87 .  {* The symbol to relocate against was undefined.  *}
  88 .  bfd_reloc_undefined,
  89 .
  90 .  {* The relocation was performed, but may not be ok - presently
  91 .     generated only when linking i960 coff files with i960 b.out
  92 .     symbols.  If this type is returned, the error_message argument
  93 .     to bfd_perform_relocation will be set.  *}
  94 .  bfd_reloc_dangerous
  95 . }
  96 . bfd_reloc_status_type;
  97 .
  98 .
  99 .typedef struct reloc_cache_entry
 100 .{
 101 .  {* A pointer into the canonical table of pointers.  *}
 102 .  struct bfd_symbol **sym_ptr_ptr;
 103 .
 104 .  {* offset in section.  *}
 105 .  bfd_size_type address;
 106 .
 107 .  {* addend for relocation value.  *}
 108 .  bfd_vma addend;
 109 .
 110 .  {* Pointer to how to perform the required relocation.  *}
 111 .  reloc_howto_type *howto;
 112 .
 113 .}
 114 .arelent;
 115 .
 116 */
 117
 118 /*
 119 DESCRIPTION
 120
 121         Here is a description of each of the fields within an <<arelent>>:
 122
 123         o <<sym_ptr_ptr>>
 124
 125         The symbol table pointer points to a pointer to the symbol
 126         associated with the relocation request.  It is the pointer
 127         into the table returned by the back end's
 128         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 129         referenced through a pointer to a pointer so that tools like
 130         the linker can fix up all the symbols of the same name by
 131         modifying only one pointer. The relocation routine looks in
 132         the symbol and uses the base of the section the symbol is
 133         attached to and the value of the symbol as the initial
 134         relocation offset. If the symbol pointer is zero, then the
 135         section provided is looked up.
 136
 137         o <<address>>
 138
 139         The <<address>> field gives the offset in bytes from the base of
 140         the section data which owns the relocation record to the first
 141         byte of relocatable information. The actual data relocated
 142         will be relative to this point; for example, a relocation
 143         type which modifies the bottom two bytes of a four byte word
 144         would not touch the first byte pointed to in a big endian
 145         world.
 146
 147         o <<addend>>
 148
 149         The <<addend>> is a value provided by the back end to be added (!)
 150         to the relocation offset. Its interpretation is dependent upon
 151         the howto. For example, on the 68k the code:
 152
 153 |        char foo[];
 154 |        main()
 155 |                {
 156 |                return foo[0x12345678];
 157 |                }
 158
 159         Could be compiled into:
 160
 161 |        linkw fp,#-4
 162 |        moveb @@#12345678,d0
 163 |        extbl d0
 164 |        unlk fp
 165 |        rts
 166
 167         This could create a reloc pointing to <<foo>>, but leave the
 168         offset in the data, something like:
 169
 170 |RELOCATION RECORDS FOR [.text]:
 171 |offset   type      value
 172 |00000006 32        _foo
 173 |
 174 |00000000 4e56 fffc          ; linkw fp,#-4
 175 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 176 |0000000a 49c0               ; extbl d0
 177 |0000000c 4e5e               ; unlk fp
 178 |0000000e 4e75               ; rts
 179
 180         Using coff and an 88k, some instructions don't have enough
 181         space in them to represent the full address range, and
 182         pointers have to be loaded in two parts. So you'd get something like:
 183
 184 |        or.u     r13,r0,hi16(_foo+0x12345678)
 185 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 186 |        jmp      r1
 187
 188         This should create two relocs, both pointing to <<_foo>>, and with
 189         0x12340000 in their addend field. The data would consist of:
 190
 191 |RELOCATION RECORDS FOR [.text]:
 192 |offset   type      value
 193 |00000002 HVRT16    _foo+0x12340000
 194 |00000006 LVRT16    _foo+0x12340000
 195 |
 196 |00000000 5da05678           ; or.u r13,r0,0x5678
 197 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 198 |00000008 f400c001           ; jmp r1
 199
 200         The relocation routine digs out the value from the data, adds
 201         it to the addend to get the original offset, and then adds the
 202         value of <<_foo>>. Note that all 32 bits have to be kept around
 203         somewhere, to cope with carry from bit 15 to bit 16.
 204
 205         One further example is the sparc and the a.out format. The
 206         sparc has a similar problem to the 88k, in that some
 207         instructions don't have room for an entire offset, but on the
 208         sparc the parts are created in odd sized lumps. The designers of
 209         the a.out format chose to not use the data within the section
 210         for storing part of the offset; all the offset is kept within
 211         the reloc. Anything in the data should be ignored.
 212
 213 |        save %sp,-112,%sp
 214 |        sethi %hi(_foo+0x12345678),%g2
 215 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 216 |        ret
 217 |        restore
 218
 219         Both relocs contain a pointer to <<foo>>, and the offsets
 220         contain junk.
 221
 222 |RELOCATION RECORDS FOR [.text]:
 223 |offset   type      value
 224 |00000004 HI22      _foo+0x12345678
 225 |00000008 LO10      _foo+0x12345678
 226 |
 227 |00000000 9de3bf90     ; save %sp,-112,%sp
 228 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 229 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 230 |0000000c 81c7e008     ; ret
 231 |00000010 81e80000     ; restore
 232
 233         o <<howto>>
 234
 235         The <<howto>> field can be imagined as a
 236         relocation instruction. It is a pointer to a structure which
 237         contains information on what to do with all of the other
 238         information in the reloc record and data section. A back end
 239         would normally have a relocation instruction set and turn
 240         relocations into pointers to the correct structure on input -
 241         but it would be possible to create each howto field on demand.
 242
 243 */
 244
 245 /*
 246 SUBSUBSECTION
 247         <<enum complain_overflow>>
 248
 249         Indicates what sort of overflow checking should be done when
 250         performing a relocation.
 251
 252 CODE_FRAGMENT
 253 .
 254 .enum complain_overflow
 255 .{
 256 .  {* Do not complain on overflow.  *}
 257 .  complain_overflow_dont,
 258 .
 259 .  {* Complain if the value overflows when considered as a signed
 260 .     number one bit larger than the field.  ie. A bitfield of N bits
 261 .     is allowed to represent -2**n to 2**n-1.  *}
 262 .  complain_overflow_bitfield,
 263 .
 264 .  {* Complain if the value overflows when considered as a signed
 265 .     number.  *}
 266 .  complain_overflow_signed,
 267 .
 268 .  {* Complain if the value overflows when considered as an
 269 .     unsigned number.  *}
 270 .  complain_overflow_unsigned
 271 .};
 272
 273 */
 274
 275 /*
 276 SUBSUBSECTION
 277         <<reloc_howto_type>>
 278
 279         The <<reloc_howto_type>> is a structure which contains all the
 280         information that libbfd needs to know to tie up a back end's data.
 281
 282 CODE_FRAGMENT
 283 .struct bfd_symbol;             {* Forward declaration.  *}
 284 .
 285 .struct reloc_howto_struct
 286 .{
 287 .  {*  The type field has mainly a documentary use - the back end can
 288 .      do what it wants with it, though normally the back end's
 289 .      external idea of what a reloc number is stored
 290 .      in this field.  For example, a PC relative word relocation
 291 .      in a coff environment has the type 023 - because that's
 292 .      what the outside world calls a R_PCRWORD reloc.  *}
 293 .  unsigned int type;
 294 .
 295 .  {*  The value the final relocation is shifted right by.  This drops
 296 .      unwanted data from the relocation.  *}
 297 .  unsigned int rightshift;
 298 .
 299 .  {*  The size of the item to be relocated.  This is *not* a
 300 .      power-of-two measure.  To get the number of bytes operated
 301 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 302 .  int size;
 303 .
 304 .  {*  The number of bits in the item to be relocated.  This is used
 305 .      when doing overflow checking.  *}
 306 .  unsigned int bitsize;
 307 .
 308 .  {*  Notes that the relocation is relative to the location in the
 309 .      data section of the addend.  The relocation function will
 310 .      subtract from the relocation value the address of the location
 311 .      being relocated.  *}
 312 .  bfd_boolean pc_relative;
 313 .
 314 .  {*  The bit position of the reloc value in the destination.
 315 .      The relocated value is left shifted by this amount.  *}
 316 .  unsigned int bitpos;
 317 .
 318 .  {* What type of overflow error should be checked for when
 319 .     relocating.  *}
 320 .  enum complain_overflow complain_on_overflow;
 321 .
 322 .  {* If this field is non null, then the supplied function is
 323 .     called rather than the normal function.  This allows really
 324 .     strange relocation methods to be accommodated (e.g., i960 callj
 325 .     instructions).  *}
 326 .  bfd_reloc_status_type (*special_function)
 327 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 328 .     bfd *, char **);
 329 .
 330 .  {* The textual name of the relocation type.  *}
 331 .  char *name;
 332 .
 333 .  {* Some formats record a relocation addend in the section contents
 334 .     rather than with the relocation.  For ELF formats this is the
 335 .     distinction between USE_REL and USE_RELA (though the code checks
 336 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 337 .     addend is recorded with the section contents; when performing a
 338 .     partial link (ld -r) the section contents (the data) will be
 339 .     modified.  The value of this field is FALSE if addends are
 340 .     recorded with the relocation (in arelent.addend); when performing
 341 .     a partial link the relocation will be modified.
 342 .     All relocations for all ELF USE_RELA targets should set this field
 343 .     to FALSE (values of TRUE should be looked on with suspicion).
 344 .     However, the converse is not true: not all relocations of all ELF
 345 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 346 .     to each particular target.  For relocs that aren't used in partial
 347 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 348 .  bfd_boolean partial_inplace;
 349 .
 350 .  {* src_mask selects the part of the instruction (or data) to be used
 351 .     in the relocation sum.  If the target relocations don't have an
 352 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 353 .     dst_mask to extract the addend from the section contents.  If
 354 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 355 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 356 .     bogus as in those cases the value in the dst_mask part of the
 357 .     section contents should be treated as garbage.  *}
 358 .  bfd_vma src_mask;
 359 .
 360 .  {* dst_mask selects which parts of the instruction (or data) are
 361 .     replaced with a relocated value.  *}
 362 .  bfd_vma dst_mask;
 363 .
 364 .  {* When some formats create PC relative instructions, they leave
 365 .     the value of the pc of the place being relocated in the offset
 366 .     slot of the instruction, so that a PC relative relocation can
 367 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 368 .     Some formats leave the displacement part of an instruction
 369 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 370 .  bfd_boolean pcrel_offset;
 371 .};
 372 .
 373 */
 374
 375 /*
 376 FUNCTION
 377         The HOWTO Macro
 378
 379 DESCRIPTION
 380         The HOWTO define is horrible and will go away.
 381
 382 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 383 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 384
 385 DESCRIPTION
 386         And will be replaced with the totally magic way. But for the
 387         moment, we are compatible, so do it this way.
 388
 389 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 390 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 391 .         NAME, FALSE, 0, 0, IN)
 392 .
 393
 394 DESCRIPTION
 395         This is used to fill in an empty howto entry in an array.
 396
 397 .#define EMPTY_HOWTO(C) \
 398 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 399 .         NULL, FALSE, 0, 0, FALSE)
 400 .
 401
 402 DESCRIPTION
 403         Helper routine to turn a symbol into a relocation value.
 404
 405 .#define HOWTO_PREPARE(relocation, symbol)               \
 406 .  {                                                     \
 407 .    if (symbol != NULL)                                 \
 408 .      {                                                 \
 409 .        if (bfd_is_com_section (symbol->section))       \
 410 .          {                                             \
 411 .            relocation = 0;                             \
 412 .          }                                             \
 413 .        else                                            \
 414 .          {                                             \
 415 .            relocation = symbol->value;                 \
 416 .          }                                             \
 417 .      }                                                 \
 418 .  }
 419 .
 420 */
 421
 422 /*
 423 FUNCTION
 424         bfd_get_reloc_size
 425
 426 SYNOPSIS
 427         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 428
 429 DESCRIPTION
 430         For a reloc_howto_type that operates on a fixed number of bytes,
 431         this returns the number of bytes operated on.
 432  */
 433
 434 unsigned int
 435 bfd_get_reloc_size (reloc_howto_type *howto)
 436 {
 437   switch (howto->size)
 438     {
 439     case 0: return 1;
 440     case 1: return 2;
 441     case 2: return 4;
 442     case 3: return 0;
 443     case 4: return 8;
 444     case 8: return 16;
 445     case -2: return 4;
 446     default: abort ();
 447     }
 448 }
 449
 450 /*
 451 TYPEDEF
 452         arelent_chain
 453
 454 DESCRIPTION
 455
 456         How relocs are tied together in an <<asection>>:
 457
 458 .typedef struct relent_chain
 459 .{
 460 .  arelent relent;
 461 .  struct relent_chain *next;
 462 .}
 463 .arelent_chain;
 464 .
 465 */
 466
 467 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 468 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 469
 470 /*
 471 FUNCTION
 472         bfd_check_overflow
 473
 474 SYNOPSIS
 475         bfd_reloc_status_type bfd_check_overflow
 476           (enum complain_overflow how,
 477            unsigned int bitsize,
 478            unsigned int rightshift,
 479            unsigned int addrsize,
 480            bfd_vma relocation);
 481
 482 DESCRIPTION
 483         Perform overflow checking on @var{relocation} which has
 484         @var{bitsize} significant bits and will be shifted right by
 485         @var{rightshift} bits, on a machine with addresses containing
 486         @var{addrsize} significant bits.  The result is either of
 487         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 488
 489 */
 490
 491 bfd_reloc_status_type
 492 bfd_check_overflow (enum complain_overflow how,
 493                     unsigned int bitsize,
 494                     unsigned int rightshift,
 495                     unsigned int addrsize,
 496                     bfd_vma relocation)
 497 {
 498   bfd_vma fieldmask, addrmask, signmask, ss, a;
 499   bfd_reloc_status_type flag = bfd_reloc_ok;
 500
 501   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 502      we'll be permissive: extra bits in the field mask will
 503      automatically extend the address mask for purposes of the
 504      overflow check.  */
 505   fieldmask = N_ONES (bitsize);
 506   signmask = ~fieldmask;
 507   addrmask = N_ONES (addrsize) | fieldmask;
 508   a = (relocation & addrmask) >> rightshift;;
 509
 510   switch (how)
 511     {
 512     case complain_overflow_dont:
 513       break;
 514
 515     case complain_overflow_signed:
 516       /* If any sign bits are set, all sign bits must be set.  That
 517          is, A must be a valid negative address after shifting.  */
 518       signmask = ~ (fieldmask >> 1);
 519       /* Fall thru */
 520
 521     case complain_overflow_bitfield:
 522       /* Bitfields are sometimes signed, sometimes unsigned.  We
 523          explicitly allow an address wrap too, which means a bitfield
 524          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 525          if the value has some, but not all, bits set outside the
 526          field.  */
 527       ss = a & signmask;
 528       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 529         flag = bfd_reloc_overflow;
 530       break;
 531
 532     case complain_overflow_unsigned:
 533       /* We have an overflow if the address does not fit in the field.  */
 534       if ((a & signmask) != 0)
 535         flag = bfd_reloc_overflow;
 536       break;
 537
 538     default:
 539       abort ();
 540     }
 541
 542   return flag;
 543 }
 544
 545 /*
 546 FUNCTION
 547         bfd_perform_relocation
 548
 549 SYNOPSIS
 550         bfd_reloc_status_type bfd_perform_relocation
 551           (bfd *abfd,
 552            arelent *reloc_entry,
 553            void *data,
 554            asection *input_section,
 555            bfd *output_bfd,
 556            char **error_message);
 557
 558 DESCRIPTION
 559         If @var{output_bfd} is supplied to this function, the
 560         generated image will be relocatable; the relocations are
 561         copied to the output file after they have been changed to
 562         reflect the new state of the world. There are two ways of
 563         reflecting the results of partial linkage in an output file:
 564         by modifying the output data in place, and by modifying the
 565         relocation record.  Some native formats (e.g., basic a.out and
 566         basic coff) have no way of specifying an addend in the
 567         relocation type, so the addend has to go in the output data.
 568         This is no big deal since in these formats the output data
 569         slot will always be big enough for the addend. Complex reloc
 570         types with addends were invented to solve just this problem.
 571         The @var{error_message} argument is set to an error message if
 572         this return @code{bfd_reloc_dangerous}.
 573
 574 */
 575
 576 bfd_reloc_status_type
 577 bfd_perform_relocation (bfd *abfd,
 578                         arelent *reloc_entry,
 579                         void *data,
 580                         asection *input_section,
 581                         bfd *output_bfd,
 582                         char **error_message)
 583 {
 584   bfd_vma relocation;
 585   bfd_reloc_status_type flag = bfd_reloc_ok;
 586   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 587   bfd_vma output_base = 0;
 588   reloc_howto_type *howto = reloc_entry->howto;
 589   asection *reloc_target_output_section;
 590   asymbol *symbol;
 591
 592   symbol = *(reloc_entry->sym_ptr_ptr);
 593   if (bfd_is_abs_section (symbol->section)
 594       && output_bfd != NULL)
 595     {
 596       reloc_entry->address += input_section->output_offset;
 597       return bfd_reloc_ok;
 598     }
 599
 600   /* If we are not producing relocatable output, return an error if
 601      the symbol is not defined.  An undefined weak symbol is
 602      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 603   if (bfd_is_und_section (symbol->section)
 604       && (symbol->flags & BSF_WEAK) == 0
 605       && output_bfd == NULL)
 606     flag = bfd_reloc_undefined;
 607
 608   /* If there is a function supplied to handle this relocation type,
 609      call it.  It'll return `bfd_reloc_continue' if further processing
 610      can be done.  */
 611   if (howto->special_function)
 612     {
 613       bfd_reloc_status_type cont;
 614       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 615                                       input_section, output_bfd,
 616                                       error_message);
 617       if (cont != bfd_reloc_continue)
 618         return cont;
 619     }
 620
 621   /* Is the address of the relocation really within the section?  */
 622   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 623     return bfd_reloc_outofrange;
 624
 625   /* Work out which section the relocation is targeted at and the
 626      initial relocation command value.  */
 627
 628   /* Get symbol value.  (Common symbols are special.)  */
 629   if (bfd_is_com_section (symbol->section))
 630     relocation = 0;
 631   else
 632     relocation = symbol->value;
 633
 634   reloc_target_output_section = symbol->section->output_section;
 635
 636   /* Convert input-section-relative symbol value to absolute.  */
 637   if ((output_bfd && ! howto->partial_inplace)
 638       || reloc_target_output_section == NULL)
 639     output_base = 0;
 640   else
 641     output_base = reloc_target_output_section->vma;
 642
 643   relocation += output_base + symbol->section->output_offset;
 644
 645   /* Add in supplied addend.  */
 646   relocation += reloc_entry->addend;
 647
 648   /* Here the variable relocation holds the final address of the
 649      symbol we are relocating against, plus any addend.  */
 650
 651   if (howto->pc_relative)
 652     {
 653       /* This is a PC relative relocation.  We want to set RELOCATION
 654          to the distance between the address of the symbol and the
 655          location.  RELOCATION is already the address of the symbol.
 656
 657          We start by subtracting the address of the section containing
 658          the location.
 659
 660          If pcrel_offset is set, we must further subtract the position
 661          of the location within the section.  Some targets arrange for
 662          the addend to be the negative of the position of the location
 663          within the section; for example, i386-aout does this.  For
 664          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 665          include the position of the location; for example, m88kbcs,
 666          or ELF.  For those targets, pcrel_offset is TRUE.
 667
 668          If we are producing relocatable output, then we must ensure
 669          that this reloc will be correctly computed when the final
 670          relocation is done.  If pcrel_offset is FALSE we want to wind
 671          up with the negative of the location within the section,
 672          which means we must adjust the existing addend by the change
 673          in the location within the section.  If pcrel_offset is TRUE
 674          we do not want to adjust the existing addend at all.
 675
 676          FIXME: This seems logical to me, but for the case of
 677          producing relocatable output it is not what the code
 678          actually does.  I don't want to change it, because it seems
 679          far too likely that something will break.  */
 680
 681       relocation -=
 682         input_section->output_section->vma + input_section->output_offset;
 683
 684       if (howto->pcrel_offset)
 685         relocation -= reloc_entry->address;
 686     }
 687
 688   if (output_bfd != NULL)
 689     {
 690       if (! howto->partial_inplace)
 691         {
 692           /* This is a partial relocation, and we want to apply the relocation
 693              to the reloc entry rather than the raw data. Modify the reloc
 694              inplace to reflect what we now know.  */
 695           reloc_entry->addend = relocation;
 696           reloc_entry->address += input_section->output_offset;
 697           return flag;
 698         }
 699       else
 700         {
 701           /* This is a partial relocation, but inplace, so modify the
 702              reloc record a bit.
 703
 704              If we've relocated with a symbol with a section, change
 705              into a ref to the section belonging to the symbol.  */
 706
 707           reloc_entry->address += input_section->output_offset;
 708
 709           /* WTF?? */
 710           if (abfd->xvec->flavour == bfd_target_coff_flavour
 711               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 712               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 713             {
 714               /* For m68k-coff, the addend was being subtracted twice during
 715                  relocation with -r.  Removing the line below this comment
 716                  fixes that problem; see PR 2953.
 717
 718 However, Ian wrote the following, regarding removing the line below,
 719 which explains why it is still enabled:  --djm
 720
 721 If you put a patch like that into BFD you need to check all the COFF
 722 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 723 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 724 problem in a different way.  There may very well be a reason that the
 725 code works as it does.
 726
 727 Hmmm.  The first obvious point is that bfd_perform_relocation should
 728 not have any tests that depend upon the flavour.  It's seem like
 729 entirely the wrong place for such a thing.  The second obvious point
 730 is that the current code ignores the reloc addend when producing
 731 relocatable output for COFF.  That's peculiar.  In fact, I really
 732 have no idea what the point of the line you want to remove is.
 733
 734 A typical COFF reloc subtracts the old value of the symbol and adds in
 735 the new value to the location in the object file (if it's a pc
 736 relative reloc it adds the difference between the symbol value and the
 737 location).  When relocating we need to preserve that property.
 738
 739 BFD handles this by setting the addend to the negative of the old
 740 value of the symbol.  Unfortunately it handles common symbols in a
 741 non-standard way (it doesn't subtract the old value) but that's a
 742 different story (we can't change it without losing backward
 743 compatibility with old object files) (coff-i386 does subtract the old
 744 value, to be compatible with existing coff-i386 targets, like SCO).
 745
 746 So everything works fine when not producing relocatable output.  When
 747 we are producing relocatable output, logically we should do exactly
 748 what we do when not producing relocatable output.  Therefore, your
 749 patch is correct.  In fact, it should probably always just set
 750 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 751 add the value into the object file.  This won't hurt the COFF code,
 752 which doesn't use the addend; I'm not sure what it will do to other
 753 formats (the thing to check for would be whether any formats both use
 754 the addend and set partial_inplace).
 755
 756 When I wanted to make coff-i386 produce relocatable output, I ran
 757 into the problem that you are running into: I wanted to remove that
 758 line.  Rather than risk it, I made the coff-i386 relocs use a special
 759 function; it's coff_i386_reloc in coff-i386.c.  The function
 760 specifically adds the addend field into the object file, knowing that
 761 bfd_perform_relocation is not going to.  If you remove that line, then
 762 coff-i386.c will wind up adding the addend field in twice.  It's
 763 trivial to fix; it just needs to be done.
 764
 765 The problem with removing the line is just that it may break some
 766 working code.  With BFD it's hard to be sure of anything.  The right
 767 way to deal with this is simply to build and test at least all the
 768 supported COFF targets.  It should be straightforward if time and disk
 769 space consuming.  For each target:
 770     1) build the linker
 771     2) generate some executable, and link it using -r (I would
 772        probably use paranoia.o and link against newlib/libc.a, which
 773        for all the supported targets would be available in
 774        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 775     3) make the change to reloc.c
 776     4) rebuild the linker
 777     5) repeat step 2
 778     6) if the resulting object files are the same, you have at least
 779        made it no worse
 780     7) if they are different you have to figure out which version is
 781        right
 782 */
 783               relocation -= reloc_entry->addend;
 784               reloc_entry->addend = 0;
 785             }
 786           else
 787             {
 788               reloc_entry->addend = relocation;
 789             }
 790         }
 791     }
 792   else
 793     {
 794       reloc_entry->addend = 0;
 795     }
 796
 797   /* FIXME: This overflow checking is incomplete, because the value
 798      might have overflowed before we get here.  For a correct check we
 799      need to compute the value in a size larger than bitsize, but we
 800      can't reasonably do that for a reloc the same size as a host
 801      machine word.
 802      FIXME: We should also do overflow checking on the result after
 803      adding in the value contained in the object file.  */
 804   if (howto->complain_on_overflow != complain_overflow_dont
 805       && flag == bfd_reloc_ok)
 806     flag = bfd_check_overflow (howto->complain_on_overflow,
 807                                howto->bitsize,
 808                                howto->rightshift,
 809                                bfd_arch_bits_per_address (abfd),
 810                                relocation);
 811
 812   /* Either we are relocating all the way, or we don't want to apply
 813      the relocation to the reloc entry (probably because there isn't
 814      any room in the output format to describe addends to relocs).  */
 815
 816   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 817      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 818      following program:
 819
 820      struct str
 821      {
 822        unsigned int i0;
 823      } s = { 0 };
 824
 825      int
 826      main ()
 827      {
 828        unsigned long x;
 829
 830        x = 0x100000000;
 831        x <<= (unsigned long) s.i0;
 832        if (x == 0)
 833          printf ("failed\n");
 834        else
 835          printf ("succeeded (%lx)\n", x);
 836      }
 837      */
 838
 839   relocation >>= (bfd_vma) howto->rightshift;
 840
 841   /* Shift everything up to where it's going to be used.  */
 842   relocation <<= (bfd_vma) howto->bitpos;
 843
 844   /* Wait for the day when all have the mask in them.  */
 845
 846   /* What we do:
 847      i instruction to be left alone
 848      o offset within instruction
 849      r relocation offset to apply
 850      S src mask
 851      D dst mask
 852      N ~dst mask
 853      A part 1
 854      B part 2
 855      R result
 856
 857      Do this:
 858      ((  i i i i i o o o o o  from bfd_get<size>
 859      and           S S S S S) to get the size offset we want
 860      +   r r r r r r r r r r) to get the final value to place
 861      and           D D D D D  to chop to right size
 862      -----------------------
 863      =             A A A A A
 864      And this:
 865      (   i i i i i o o o o o  from bfd_get<size>
 866      and N N N N N          ) get instruction
 867      -----------------------
 868      =   B B B B B
 869
 870      And then:
 871      (   B B B B B
 872      or            A A A A A)
 873      -----------------------
 874      =   R R R R R R R R R R  put into bfd_put<size>
 875      */
 876
 877 #define DOIT(x) \
 878   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 879
 880   switch (howto->size)
 881     {
 882     case 0:
 883       {
 884         char x = bfd_get_8 (abfd, (char *) data + octets);
 885         DOIT (x);
 886         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 887       }
 888       break;
 889
 890     case 1:
 891       {
 892         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 893         DOIT (x);
 894         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 895       }
 896       break;
 897     case 2:
 898       {
 899         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 900         DOIT (x);
 901         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 902       }
 903       break;
 904     case -2:
 905       {
 906         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case -1:
 914       {
 915         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 916         relocation = -relocation;
 917         DOIT (x);
 918         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 919       }
 920       break;
 921
 922     case 3:
 923       /* Do nothing */
 924       break;
 925
 926     case 4:
 927 #ifdef BFD64
 928       {
 929         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 930         DOIT (x);
 931         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 932       }
 933 #else
 934       abort ();
 935 #endif
 936       break;
 937     default:
 938       return bfd_reloc_other;
 939     }
 940
 941   return flag;
 942 }
 943
 944 /*
 945 FUNCTION
 946         bfd_install_relocation
 947
 948 SYNOPSIS
 949         bfd_reloc_status_type bfd_install_relocation
 950           (bfd *abfd,
 951            arelent *reloc_entry,
 952            void *data, bfd_vma data_start,
 953            asection *input_section,
 954            char **error_message);
 955
 956 DESCRIPTION
 957         This looks remarkably like <<bfd_perform_relocation>>, except it
 958         does not expect that the section contents have been filled in.
 959         I.e., it's suitable for use when creating, rather than applying
 960         a relocation.
 961
 962         For now, this function should be considered reserved for the
 963         assembler.
 964 */
 965
 966 bfd_reloc_status_type
 967 bfd_install_relocation (bfd *abfd,
 968                         arelent *reloc_entry,
 969                         void *data_start,
 970                         bfd_vma data_start_offset,
 971                         asection *input_section,
 972                         char **error_message)
 973 {
 974   bfd_vma relocation;
 975   bfd_reloc_status_type flag = bfd_reloc_ok;
 976   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 977   bfd_vma output_base = 0;
 978   reloc_howto_type *howto = reloc_entry->howto;
 979   asection *reloc_target_output_section;
 980   asymbol *symbol;
 981   bfd_byte *data;
 982
 983   symbol = *(reloc_entry->sym_ptr_ptr);
 984   if (bfd_is_abs_section (symbol->section))
 985     {
 986       reloc_entry->address += input_section->output_offset;
 987       return bfd_reloc_ok;
 988     }
 989
 990   /* If there is a function supplied to handle this relocation type,
 991      call it.  It'll return `bfd_reloc_continue' if further processing
 992      can be done.  */
 993   if (howto->special_function)
 994     {
 995       bfd_reloc_status_type cont;
 996
 997       /* XXX - The special_function calls haven't been fixed up to deal
 998          with creating new relocations and section contents.  */
 999       cont = howto->special_function (abfd, reloc_entry, symbol,
1000                                       /* XXX - Non-portable! */
1001                                       ((bfd_byte *) data_start
1002                                        - data_start_offset),
1003                                       input_section, abfd, error_message);
1004       if (cont != bfd_reloc_continue)
1005         return cont;
1006     }
1007
1008   /* Is the address of the relocation really within the section?  */
1009   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1010     return bfd_reloc_outofrange;
1011
1012   /* Work out which section the relocation is targeted at and the
1013      initial relocation command value.  */
1014
1015   /* Get symbol value.  (Common symbols are special.)  */
1016   if (bfd_is_com_section (symbol->section))
1017     relocation = 0;
1018   else
1019     relocation = symbol->value;
1020
1021   reloc_target_output_section = symbol->section->output_section;
1022
1023   /* Convert input-section-relative symbol value to absolute.  */
1024   if (! howto->partial_inplace)
1025     output_base = 0;
1026   else
1027     output_base = reloc_target_output_section->vma;
1028
1029   relocation += output_base + symbol->section->output_offset;
1030
1031   /* Add in supplied addend.  */
1032   relocation += reloc_entry->addend;
1033
1034   /* Here the variable relocation holds the final address of the
1035      symbol we are relocating against, plus any addend.  */
1036
1037   if (howto->pc_relative)
1038     {
1039       /* This is a PC relative relocation.  We want to set RELOCATION
1040          to the distance between the address of the symbol and the
1041          location.  RELOCATION is already the address of the symbol.
1042
1043          We start by subtracting the address of the section containing
1044          the location.
1045
1046          If pcrel_offset is set, we must further subtract the position
1047          of the location within the section.  Some targets arrange for
1048          the addend to be the negative of the position of the location
1049          within the section; for example, i386-aout does this.  For
1050          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1051          include the position of the location; for example, m88kbcs,
1052          or ELF.  For those targets, pcrel_offset is TRUE.
1053
1054          If we are producing relocatable output, then we must ensure
1055          that this reloc will be correctly computed when the final
1056          relocation is done.  If pcrel_offset is FALSE we want to wind
1057          up with the negative of the location within the section,
1058          which means we must adjust the existing addend by the change
1059          in the location within the section.  If pcrel_offset is TRUE
1060          we do not want to adjust the existing addend at all.
1061
1062          FIXME: This seems logical to me, but for the case of
1063          producing relocatable output it is not what the code
1064          actually does.  I don't want to change it, because it seems
1065          far too likely that something will break.  */
1066
1067       relocation -=
1068         input_section->output_section->vma + input_section->output_offset;
1069
1070       if (howto->pcrel_offset && howto->partial_inplace)
1071         relocation -= reloc_entry->address;
1072     }
1073
1074   if (! howto->partial_inplace)
1075     {
1076       /* This is a partial relocation, and we want to apply the relocation
1077          to the reloc entry rather than the raw data. Modify the reloc
1078          inplace to reflect what we now know.  */
1079       reloc_entry->addend = relocation;
1080       reloc_entry->address += input_section->output_offset;
1081       return flag;
1082     }
1083   else
1084     {
1085       /* This is a partial relocation, but inplace, so modify the
1086          reloc record a bit.
1087
1088          If we've relocated with a symbol with a section, change
1089          into a ref to the section belonging to the symbol.  */
1090       reloc_entry->address += input_section->output_offset;
1091
1092       /* WTF?? */
1093       if (abfd->xvec->flavour == bfd_target_coff_flavour
1094           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1095           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1096         {
1097
1098           /* For m68k-coff, the addend was being subtracted twice during
1099              relocation with -r.  Removing the line below this comment
1100              fixes that problem; see PR 2953.
1101
1102 However, Ian wrote the following, regarding removing the line below,
1103 which explains why it is still enabled:  --djm
1104
1105 If you put a patch like that into BFD you need to check all the COFF
1106 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1107 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1108 problem in a different way.  There may very well be a reason that the
1109 code works as it does.
1110
1111 Hmmm.  The first obvious point is that bfd_install_relocation should
1112 not have any tests that depend upon the flavour.  It's seem like
1113 entirely the wrong place for such a thing.  The second obvious point
1114 is that the current code ignores the reloc addend when producing
1115 relocatable output for COFF.  That's peculiar.  In fact, I really
1116 have no idea what the point of the line you want to remove is.
1117
1118 A typical COFF reloc subtracts the old value of the symbol and adds in
1119 the new value to the location in the object file (if it's a pc
1120 relative reloc it adds the difference between the symbol value and the
1121 location).  When relocating we need to preserve that property.
1122
1123 BFD handles this by setting the addend to the negative of the old
1124 value of the symbol.  Unfortunately it handles common symbols in a
1125 non-standard way (it doesn't subtract the old value) but that's a
1126 different story (we can't change it without losing backward
1127 compatibility with old object files) (coff-i386 does subtract the old
1128 value, to be compatible with existing coff-i386 targets, like SCO).
1129
1130 So everything works fine when not producing relocatable output.  When
1131 we are producing relocatable output, logically we should do exactly
1132 what we do when not producing relocatable output.  Therefore, your
1133 patch is correct.  In fact, it should probably always just set
1134 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1135 add the value into the object file.  This won't hurt the COFF code,
1136 which doesn't use the addend; I'm not sure what it will do to other
1137 formats (the thing to check for would be whether any formats both use
1138 the addend and set partial_inplace).
1139
1140 When I wanted to make coff-i386 produce relocatable output, I ran
1141 into the problem that you are running into: I wanted to remove that
1142 line.  Rather than risk it, I made the coff-i386 relocs use a special
1143 function; it's coff_i386_reloc in coff-i386.c.  The function
1144 specifically adds the addend field into the object file, knowing that
1145 bfd_install_relocation is not going to.  If you remove that line, then
1146 coff-i386.c will wind up adding the addend field in twice.  It's
1147 trivial to fix; it just needs to be done.
1148
1149 The problem with removing the line is just that it may break some
1150 working code.  With BFD it's hard to be sure of anything.  The right
1151 way to deal with this is simply to build and test at least all the
1152 supported COFF targets.  It should be straightforward if time and disk
1153 space consuming.  For each target:
1154     1) build the linker
1155     2) generate some executable, and link it using -r (I would
1156        probably use paranoia.o and link against newlib/libc.a, which
1157        for all the supported targets would be available in
1158        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1159     3) make the change to reloc.c
1160     4) rebuild the linker
1161     5) repeat step 2
1162     6) if the resulting object files are the same, you have at least
1163        made it no worse
1164     7) if they are different you have to figure out which version is
1165        right.  */
1166           relocation -= reloc_entry->addend;
1167           /* FIXME: There should be no target specific code here...  */
1168           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1169             reloc_entry->addend = 0;
1170         }
1171       else
1172         {
1173           reloc_entry->addend = relocation;
1174         }
1175     }
1176
1177   /* FIXME: This overflow checking is incomplete, because the value
1178      might have overflowed before we get here.  For a correct check we
1179      need to compute the value in a size larger than bitsize, but we
1180      can't reasonably do that for a reloc the same size as a host
1181      machine word.
1182      FIXME: We should also do overflow checking on the result after
1183      adding in the value contained in the object file.  */
1184   if (howto->complain_on_overflow != complain_overflow_dont)
1185     flag = bfd_check_overflow (howto->complain_on_overflow,
1186                                howto->bitsize,
1187                                howto->rightshift,
1188                                bfd_arch_bits_per_address (abfd),
1189                                relocation);
1190
1191   /* Either we are relocating all the way, or we don't want to apply
1192      the relocation to the reloc entry (probably because there isn't
1193      any room in the output format to describe addends to relocs).  */
1194
1195   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1196      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1197      following program:
1198
1199      struct str
1200      {
1201        unsigned int i0;
1202      } s = { 0 };
1203
1204      int
1205      main ()
1206      {
1207        unsigned long x;
1208
1209        x = 0x100000000;
1210        x <<= (unsigned long) s.i0;
1211        if (x == 0)
1212          printf ("failed\n");
1213        else
1214          printf ("succeeded (%lx)\n", x);
1215      }
1216      */
1217
1218   relocation >>= (bfd_vma) howto->rightshift;
1219
1220   /* Shift everything up to where it's going to be used.  */
1221   relocation <<= (bfd_vma) howto->bitpos;
1222
1223   /* Wait for the day when all have the mask in them.  */
1224
1225   /* What we do:
1226      i instruction to be left alone
1227      o offset within instruction
1228      r relocation offset to apply
1229      S src mask
1230      D dst mask
1231      N ~dst mask
1232      A part 1
1233      B part 2
1234      R result
1235
1236      Do this:
1237      ((  i i i i i o o o o o  from bfd_get<size>
1238      and           S S S S S) to get the size offset we want
1239      +   r r r r r r r r r r) to get the final value to place
1240      and           D D D D D  to chop to right size
1241      -----------------------
1242      =             A A A A A
1243      And this:
1244      (   i i i i i o o o o o  from bfd_get<size>
1245      and N N N N N          ) get instruction
1246      -----------------------
1247      =   B B B B B
1248
1249      And then:
1250      (   B B B B B
1251      or            A A A A A)
1252      -----------------------
1253      =   R R R R R R R R R R  put into bfd_put<size>
1254      */
1255
1256 #define DOIT(x) \
1257   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1258
1259   data = (bfd_byte *) data_start + (octets - data_start_offset);
1260
1261   switch (howto->size)
1262     {
1263     case 0:
1264       {
1265         char x = bfd_get_8 (abfd, data);
1266         DOIT (x);
1267         bfd_put_8 (abfd, x, data);
1268       }
1269       break;
1270
1271     case 1:
1272       {
1273         short x = bfd_get_16 (abfd, data);
1274         DOIT (x);
1275         bfd_put_16 (abfd, (bfd_vma) x, data);
1276       }
1277       break;
1278     case 2:
1279       {
1280         long x = bfd_get_32 (abfd, data);
1281         DOIT (x);
1282         bfd_put_32 (abfd, (bfd_vma) x, data);
1283       }
1284       break;
1285     case -2:
1286       {
1287         long x = bfd_get_32 (abfd, data);
1288         relocation = -relocation;
1289         DOIT (x);
1290         bfd_put_32 (abfd, (bfd_vma) x, data);
1291       }
1292       break;
1293
1294     case 3:
1295       /* Do nothing */
1296       break;
1297
1298     case 4:
1299       {
1300         bfd_vma x = bfd_get_64 (abfd, data);
1301         DOIT (x);
1302         bfd_put_64 (abfd, x, data);
1303       }
1304       break;
1305     default:
1306       return bfd_reloc_other;
1307     }
1308
1309   return flag;
1310 }
1311
1312 /* This relocation routine is used by some of the backend linkers.
1313    They do not construct asymbol or arelent structures, so there is no
1314    reason for them to use bfd_perform_relocation.  Also,
1315    bfd_perform_relocation is so hacked up it is easier to write a new
1316    function than to try to deal with it.
1317
1318    This routine does a final relocation.  Whether it is useful for a
1319    relocatable link depends upon how the object format defines
1320    relocations.
1321
1322    FIXME: This routine ignores any special_function in the HOWTO,
1323    since the existing special_function values have been written for
1324    bfd_perform_relocation.
1325
1326    HOWTO is the reloc howto information.
1327    INPUT_BFD is the BFD which the reloc applies to.
1328    INPUT_SECTION is the section which the reloc applies to.
1329    CONTENTS is the contents of the section.
1330    ADDRESS is the address of the reloc within INPUT_SECTION.
1331    VALUE is the value of the symbol the reloc refers to.
1332    ADDEND is the addend of the reloc.  */
1333
1334 bfd_reloc_status_type
1335 _bfd_final_link_relocate (reloc_howto_type *howto,
1336                           bfd *input_bfd,
1337                           asection *input_section,
1338                           bfd_byte *contents,
1339                           bfd_vma address,
1340                           bfd_vma value,
1341                           bfd_vma addend)
1342 {
1343   bfd_vma relocation;
1344
1345   /* Sanity check the address.  */
1346   if (address > bfd_get_section_limit (input_bfd, input_section))
1347     return bfd_reloc_outofrange;
1348
1349   /* This function assumes that we are dealing with a basic relocation
1350      against a symbol.  We want to compute the value of the symbol to
1351      relocate to.  This is just VALUE, the value of the symbol, plus
1352      ADDEND, any addend associated with the reloc.  */
1353   relocation = value + addend;
1354
1355   /* If the relocation is PC relative, we want to set RELOCATION to
1356      the distance between the symbol (currently in RELOCATION) and the
1357      location we are relocating.  Some targets (e.g., i386-aout)
1358      arrange for the contents of the section to be the negative of the
1359      offset of the location within the section; for such targets
1360      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1361      simply leave the contents of the section as zero; for such
1362      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1363      need to subtract out the offset of the location within the
1364      section (which is just ADDRESS).  */
1365   if (howto->pc_relative)
1366     {
1367       relocation -= (input_section->output_section->vma
1368                      + input_section->output_offset);
1369       if (howto->pcrel_offset)
1370         relocation -= address;
1371     }
1372
1373   return _bfd_relocate_contents (howto, input_bfd, relocation,
1374                                  contents + address);
1375 }
1376
1377 /* Relocate a given location using a given value and howto.  */
1378
1379 bfd_reloc_status_type
1380 _bfd_relocate_contents (reloc_howto_type *howto,
1381                         bfd *input_bfd,
1382                         bfd_vma relocation,
1383                         bfd_byte *location)
1384 {
1385   int size;
1386   bfd_vma x = 0;
1387   bfd_reloc_status_type flag;
1388   unsigned int rightshift = howto->rightshift;
1389   unsigned int bitpos = howto->bitpos;
1390
1391   /* If the size is negative, negate RELOCATION.  This isn't very
1392      general.  */
1393   if (howto->size < 0)
1394     relocation = -relocation;
1395
1396   /* Get the value we are going to relocate.  */
1397   size = bfd_get_reloc_size (howto);
1398   switch (size)
1399     {
1400     default:
1401     case 0:
1402       abort ();
1403     case 1:
1404       x = bfd_get_8 (input_bfd, location);
1405       break;
1406     case 2:
1407       x = bfd_get_16 (input_bfd, location);
1408       break;
1409     case 4:
1410       x = bfd_get_32 (input_bfd, location);
1411       break;
1412     case 8:
1413 #ifdef BFD64
1414       x = bfd_get_64 (input_bfd, location);
1415 #else
1416       abort ();
1417 #endif
1418       break;
1419     }
1420
1421   /* Check for overflow.  FIXME: We may drop bits during the addition
1422      which we don't check for.  We must either check at every single
1423      operation, which would be tedious, or we must do the computations
1424      in a type larger than bfd_vma, which would be inefficient.  */
1425   flag = bfd_reloc_ok;
1426   if (howto->complain_on_overflow != complain_overflow_dont)
1427     {
1428       bfd_vma addrmask, fieldmask, signmask, ss;
1429       bfd_vma a, b, sum;
1430
1431       /* Get the values to be added together.  For signed and unsigned
1432          relocations, we assume that all values should be truncated to
1433          the size of an address.  For bitfields, all the bits matter.
1434          See also bfd_check_overflow.  */
1435       fieldmask = N_ONES (howto->bitsize);
1436       signmask = ~fieldmask;
1437       addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
1438       a = (relocation & addrmask) >> rightshift;
1439       b = (x & howto->src_mask & addrmask) >> bitpos;
1440
1441       switch (howto->complain_on_overflow)
1442         {
1443         case complain_overflow_signed:
1444           /* If any sign bits are set, all sign bits must be set.
1445              That is, A must be a valid negative address after
1446              shifting.  */
1447           signmask = ~(fieldmask >> 1);
1448           /* Fall thru */
1449
1450         case complain_overflow_bitfield:
1451           /* Much like the signed check, but for a field one bit
1452              wider.  We allow a bitfield to represent numbers in the
1453              range -2**n to 2**n-1, where n is the number of bits in the
1454              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1455              can't overflow, which is exactly what we want.  */
1456           ss = a & signmask;
1457           if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
1458             flag = bfd_reloc_overflow;
1459
1460           /* We only need this next bit of code if the sign bit of B
1461              is below the sign bit of A.  This would only happen if
1462              SRC_MASK had fewer bits than BITSIZE.  Note that if
1463              SRC_MASK has more bits than BITSIZE, we can get into
1464              trouble; we would need to verify that B is in range, as
1465              we do for A above.  */
1466           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1467           ss >>= bitpos;
1468
1469           /* Set all the bits above the sign bit.  */
1470           b = (b ^ ss) - ss;
1471
1472           /* Now we can do the addition.  */
1473           sum = a + b;
1474
1475           /* See if the result has the correct sign.  Bits above the
1476              sign bit are junk now; ignore them.  If the sum is
1477              positive, make sure we did not have all negative inputs;
1478              if the sum is negative, make sure we did not have all
1479              positive inputs.  The test below looks only at the sign
1480              bits, and it really just
1481                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1482
1483              We mask with addrmask here to explicitly allow an address
1484              wrap-around.  The Linux kernel relies on it, and it is
1485              the only way to write assembler code which can run when
1486              loaded at a location 0x80000000 away from the location at
1487              which it is linked.  */
1488           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1489             flag = bfd_reloc_overflow;
1490           break;
1491
1492         case complain_overflow_unsigned:
1493           /* Checking for an unsigned overflow is relatively easy:
1494              trim the addresses and add, and trim the result as well.
1495              Overflow is normally indicated when the result does not
1496              fit in the field.  However, we also need to consider the
1497              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1498              input is 0x80000000, and bfd_vma is only 32 bits; then we
1499              will get sum == 0, but there is an overflow, since the
1500              inputs did not fit in the field.  Instead of doing a
1501              separate test, we can check for this by or-ing in the
1502              operands when testing for the sum overflowing its final
1503              field.  */
1504           sum = (a + b) & addrmask;
1505           if ((a | b | sum) & signmask)
1506             flag = bfd_reloc_overflow;
1507           break;
1508
1509         default:
1510           abort ();
1511         }
1512     }
1513
1514   /* Put RELOCATION in the right bits.  */
1515   relocation >>= (bfd_vma) rightshift;
1516   relocation <<= (bfd_vma) bitpos;
1517
1518   /* Add RELOCATION to the right bits of X.  */
1519   x = ((x & ~howto->dst_mask)
1520        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1521
1522   /* Put the relocated value back in the object file.  */
1523   switch (size)
1524     {
1525     default:
1526       abort ();
1527     case 1:
1528       bfd_put_8 (input_bfd, x, location);
1529       break;
1530     case 2:
1531       bfd_put_16 (input_bfd, x, location);
1532       break;
1533     case 4:
1534       bfd_put_32 (input_bfd, x, location);
1535       break;
1536     case 8:
1537 #ifdef BFD64
1538       bfd_put_64 (input_bfd, x, location);
1539 #else
1540       abort ();
1541 #endif
1542       break;
1543     }
1544
1545   return flag;
1546 }
1547
1548 /* Clear a given location using a given howto, by applying a relocation value
1549    of zero and discarding any in-place addend.  This is used for fixed-up
1550    relocations against discarded symbols, to make ignorable debug or unwind
1551    information more obvious.  */
1552
1553 void
1554 _bfd_clear_contents (reloc_howto_type *howto,
1555                      bfd *input_bfd,
1556                      bfd_byte *location)
1557 {
1558   int size;
1559   bfd_vma x = 0;
1560
1561   /* Get the value we are going to relocate.  */
1562   size = bfd_get_reloc_size (howto);
1563   switch (size)
1564     {
1565     default:
1566     case 0:
1567       abort ();
1568     case 1:
1569       x = bfd_get_8 (input_bfd, location);
1570       break;
1571     case 2:
1572       x = bfd_get_16 (input_bfd, location);
1573       break;
1574     case 4:
1575       x = bfd_get_32 (input_bfd, location);
1576       break;
1577     case 8:
1578 #ifdef BFD64
1579       x = bfd_get_64 (input_bfd, location);
1580 #else
1581       abort ();
1582 #endif
1583       break;
1584     }
1585
1586   /* Zero out the unwanted bits of X.  */
1587   x &= ~howto->dst_mask;
1588
1589   /* Put the relocated value back in the object file.  */
1590   switch (size)
1591     {
1592     default:
1593     case 0:
1594       abort ();
1595     case 1:
1596       bfd_put_8 (input_bfd, x, location);
1597       break;
1598     case 2:
1599       bfd_put_16 (input_bfd, x, location);
1600       break;
1601     case 4:
1602       bfd_put_32 (input_bfd, x, location);
1603       break;
1604     case 8:
1605 #ifdef BFD64
1606       bfd_put_64 (input_bfd, x, location);
1607 #else
1608       abort ();
1609 #endif
1610       break;
1611     }
1612 }
1613
1614 /*
1615 DOCDD
1616 INODE
1617         howto manager,  , typedef arelent, Relocations
1618
1619 SUBSECTION
1620         The howto manager
1621
1622         When an application wants to create a relocation, but doesn't
1623         know what the target machine might call it, it can find out by
1624         using this bit of code.
1625
1626 */
1627
1628 /*
1629 TYPEDEF
1630         bfd_reloc_code_type
1631
1632 DESCRIPTION
1633         The insides of a reloc code.  The idea is that, eventually, there
1634         will be one enumerator for every type of relocation we ever do.
1635         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1636         return a howto pointer.
1637
1638         This does mean that the application must determine the correct
1639         enumerator value; you can't get a howto pointer from a random set
1640         of attributes.
1641
1642 SENUM
1643    bfd_reloc_code_real
1644
1645 ENUM
1646   BFD_RELOC_64
1647 ENUMX
1648   BFD_RELOC_32
1649 ENUMX
1650   BFD_RELOC_26
1651 ENUMX
1652   BFD_RELOC_24
1653 ENUMX
1654   BFD_RELOC_16
1655 ENUMX
1656   BFD_RELOC_14
1657 ENUMX
1658   BFD_RELOC_8
1659 ENUMDOC
1660   Basic absolute relocations of N bits.
1661
1662 ENUM
1663   BFD_RELOC_64_PCREL
1664 ENUMX
1665   BFD_RELOC_32_PCREL
1666 ENUMX
1667   BFD_RELOC_24_PCREL
1668 ENUMX
1669   BFD_RELOC_16_PCREL
1670 ENUMX
1671   BFD_RELOC_12_PCREL
1672 ENUMX
1673   BFD_RELOC_8_PCREL
1674 ENUMDOC
1675   PC-relative relocations.  Sometimes these are relative to the address
1676 of the relocation itself; sometimes they are relative to the start of
1677 the section containing the relocation.  It depends on the specific target.
1678
1679 The 24-bit relocation is used in some Intel 960 configurations.
1680
1681 ENUM
1682   BFD_RELOC_32_SECREL
1683 ENUMDOC
1684   Section relative relocations.  Some targets need this for DWARF2.
1685
1686 ENUM
1687   BFD_RELOC_32_GOT_PCREL
1688 ENUMX
1689   BFD_RELOC_16_GOT_PCREL
1690 ENUMX
1691   BFD_RELOC_8_GOT_PCREL
1692 ENUMX
1693   BFD_RELOC_32_GOTOFF
1694 ENUMX
1695   BFD_RELOC_16_GOTOFF
1696 ENUMX
1697   BFD_RELOC_LO16_GOTOFF
1698 ENUMX
1699   BFD_RELOC_HI16_GOTOFF
1700 ENUMX
1701   BFD_RELOC_HI16_S_GOTOFF
1702 ENUMX
1703   BFD_RELOC_8_GOTOFF
1704 ENUMX
1705   BFD_RELOC_64_PLT_PCREL
1706 ENUMX
1707   BFD_RELOC_32_PLT_PCREL
1708 ENUMX
1709   BFD_RELOC_24_PLT_PCREL
1710 ENUMX
1711   BFD_RELOC_16_PLT_PCREL
1712 ENUMX
1713   BFD_RELOC_8_PLT_PCREL
1714 ENUMX
1715   BFD_RELOC_64_PLTOFF
1716 ENUMX
1717   BFD_RELOC_32_PLTOFF
1718 ENUMX
1719   BFD_RELOC_16_PLTOFF
1720 ENUMX
1721   BFD_RELOC_LO16_PLTOFF
1722 ENUMX
1723   BFD_RELOC_HI16_PLTOFF
1724 ENUMX
1725   BFD_RELOC_HI16_S_PLTOFF
1726 ENUMX
1727   BFD_RELOC_8_PLTOFF
1728 ENUMDOC
1729   For ELF.
1730
1731 ENUM
1732   BFD_RELOC_68K_GLOB_DAT
1733 ENUMX
1734   BFD_RELOC_68K_JMP_SLOT
1735 ENUMX
1736   BFD_RELOC_68K_RELATIVE
1737 ENUMX
1738   BFD_RELOC_68K_TLS_GD32
1739 ENUMX
1740   BFD_RELOC_68K_TLS_GD16
1741 ENUMX
1742   BFD_RELOC_68K_TLS_GD8
1743 ENUMX
1744   BFD_RELOC_68K_TLS_LDM32
1745 ENUMX
1746   BFD_RELOC_68K_TLS_LDM16
1747 ENUMX
1748   BFD_RELOC_68K_TLS_LDM8
1749 ENUMX
1750   BFD_RELOC_68K_TLS_LDO32
1751 ENUMX
1752   BFD_RELOC_68K_TLS_LDO16
1753 ENUMX
1754   BFD_RELOC_68K_TLS_LDO8
1755 ENUMX
1756   BFD_RELOC_68K_TLS_IE32
1757 ENUMX
1758   BFD_RELOC_68K_TLS_IE16
1759 ENUMX
1760   BFD_RELOC_68K_TLS_IE8
1761 ENUMX
1762   BFD_RELOC_68K_TLS_LE32
1763 ENUMX
1764   BFD_RELOC_68K_TLS_LE16
1765 ENUMX
1766   BFD_RELOC_68K_TLS_LE8
1767 ENUMDOC
1768   Relocations used by 68K ELF.
1769
1770 ENUM
1771   BFD_RELOC_32_BASEREL
1772 ENUMX
1773   BFD_RELOC_16_BASEREL
1774 ENUMX
1775   BFD_RELOC_LO16_BASEREL
1776 ENUMX
1777   BFD_RELOC_HI16_BASEREL
1778 ENUMX
1779   BFD_RELOC_HI16_S_BASEREL
1780 ENUMX
1781   BFD_RELOC_8_BASEREL
1782 ENUMX
1783   BFD_RELOC_RVA
1784 ENUMDOC
1785   Linkage-table relative.
1786
1787 ENUM
1788   BFD_RELOC_8_FFnn
1789 ENUMDOC
1790   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1791
1792 ENUM
1793   BFD_RELOC_32_PCREL_S2
1794 ENUMX
1795   BFD_RELOC_16_PCREL_S2
1796 ENUMX
1797   BFD_RELOC_23_PCREL_S2
1798 ENUMDOC
1799   These PC-relative relocations are stored as word displacements --
1800 i.e., byte displacements shifted right two bits.  The 30-bit word
1801 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1802 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1803 signed 16-bit displacement is used on the MIPS, and the 23-bit
1804 displacement is used on the Alpha.
1805
1806 ENUM
1807   BFD_RELOC_HI22
1808 ENUMX
1809   BFD_RELOC_LO10
1810 ENUMDOC
1811   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1812 the target word.  These are used on the SPARC.
1813
1814 ENUM
1815   BFD_RELOC_GPREL16
1816 ENUMX
1817   BFD_RELOC_GPREL32
1818 ENUMDOC
1819   For systems that allocate a Global Pointer register, these are
1820 displacements off that register.  These relocation types are
1821 handled specially, because the value the register will have is
1822 decided relatively late.
1823
1824 ENUM
1825   BFD_RELOC_I960_CALLJ
1826 ENUMDOC
1827   Reloc types used for i960/b.out.
1828
1829 ENUM
1830   BFD_RELOC_NONE
1831 ENUMX
1832   BFD_RELOC_SPARC_WDISP22
1833 ENUMX
1834   BFD_RELOC_SPARC22
1835 ENUMX
1836   BFD_RELOC_SPARC13
1837 ENUMX
1838   BFD_RELOC_SPARC_GOT10
1839 ENUMX
1840   BFD_RELOC_SPARC_GOT13
1841 ENUMX
1842   BFD_RELOC_SPARC_GOT22
1843 ENUMX
1844   BFD_RELOC_SPARC_PC10
1845 ENUMX
1846   BFD_RELOC_SPARC_PC22
1847 ENUMX
1848   BFD_RELOC_SPARC_WPLT30
1849 ENUMX
1850   BFD_RELOC_SPARC_COPY
1851 ENUMX
1852   BFD_RELOC_SPARC_GLOB_DAT
1853 ENUMX
1854   BFD_RELOC_SPARC_JMP_SLOT
1855 ENUMX
1856   BFD_RELOC_SPARC_RELATIVE
1857 ENUMX
1858   BFD_RELOC_SPARC_UA16
1859 ENUMX
1860   BFD_RELOC_SPARC_UA32
1861 ENUMX
1862   BFD_RELOC_SPARC_UA64
1863 ENUMX
1864   BFD_RELOC_SPARC_GOTDATA_HIX22
1865 ENUMX
1866   BFD_RELOC_SPARC_GOTDATA_LOX10
1867 ENUMX
1868   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1869 ENUMX
1870   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1871 ENUMX
1872   BFD_RELOC_SPARC_GOTDATA_OP
1873 ENUMDOC
1874   SPARC ELF relocations.  There is probably some overlap with other
1875   relocation types already defined.
1876
1877 ENUM
1878   BFD_RELOC_SPARC_BASE13
1879 ENUMX
1880   BFD_RELOC_SPARC_BASE22
1881 ENUMDOC
1882   I think these are specific to SPARC a.out (e.g., Sun 4).
1883
1884 ENUMEQ
1885   BFD_RELOC_SPARC_64
1886   BFD_RELOC_64
1887 ENUMX
1888   BFD_RELOC_SPARC_10
1889 ENUMX
1890   BFD_RELOC_SPARC_11
1891 ENUMX
1892   BFD_RELOC_SPARC_OLO10
1893 ENUMX
1894   BFD_RELOC_SPARC_HH22
1895 ENUMX
1896   BFD_RELOC_SPARC_HM10
1897 ENUMX
1898   BFD_RELOC_SPARC_LM22
1899 ENUMX
1900   BFD_RELOC_SPARC_PC_HH22
1901 ENUMX
1902   BFD_RELOC_SPARC_PC_HM10
1903 ENUMX
1904   BFD_RELOC_SPARC_PC_LM22
1905 ENUMX
1906   BFD_RELOC_SPARC_WDISP16
1907 ENUMX
1908   BFD_RELOC_SPARC_WDISP19
1909 ENUMX
1910   BFD_RELOC_SPARC_7
1911 ENUMX
1912   BFD_RELOC_SPARC_6
1913 ENUMX
1914   BFD_RELOC_SPARC_5
1915 ENUMEQX
1916   BFD_RELOC_SPARC_DISP64
1917   BFD_RELOC_64_PCREL
1918 ENUMX
1919   BFD_RELOC_SPARC_PLT32
1920 ENUMX
1921   BFD_RELOC_SPARC_PLT64
1922 ENUMX
1923   BFD_RELOC_SPARC_HIX22
1924 ENUMX
1925   BFD_RELOC_SPARC_LOX10
1926 ENUMX
1927   BFD_RELOC_SPARC_H44
1928 ENUMX
1929   BFD_RELOC_SPARC_M44
1930 ENUMX
1931   BFD_RELOC_SPARC_L44
1932 ENUMX
1933   BFD_RELOC_SPARC_REGISTER
1934 ENUMDOC
1935   SPARC64 relocations
1936
1937 ENUM
1938   BFD_RELOC_SPARC_REV32
1939 ENUMDOC
1940   SPARC little endian relocation
1941 ENUM
1942   BFD_RELOC_SPARC_TLS_GD_HI22
1943 ENUMX
1944   BFD_RELOC_SPARC_TLS_GD_LO10
1945 ENUMX
1946   BFD_RELOC_SPARC_TLS_GD_ADD
1947 ENUMX
1948   BFD_RELOC_SPARC_TLS_GD_CALL
1949 ENUMX
1950   BFD_RELOC_SPARC_TLS_LDM_HI22
1951 ENUMX
1952   BFD_RELOC_SPARC_TLS_LDM_LO10
1953 ENUMX
1954   BFD_RELOC_SPARC_TLS_LDM_ADD
1955 ENUMX
1956   BFD_RELOC_SPARC_TLS_LDM_CALL
1957 ENUMX
1958   BFD_RELOC_SPARC_TLS_LDO_HIX22
1959 ENUMX
1960   BFD_RELOC_SPARC_TLS_LDO_LOX10
1961 ENUMX
1962   BFD_RELOC_SPARC_TLS_LDO_ADD
1963 ENUMX
1964   BFD_RELOC_SPARC_TLS_IE_HI22
1965 ENUMX
1966   BFD_RELOC_SPARC_TLS_IE_LO10
1967 ENUMX
1968   BFD_RELOC_SPARC_TLS_IE_LD
1969 ENUMX
1970   BFD_RELOC_SPARC_TLS_IE_LDX
1971 ENUMX
1972   BFD_RELOC_SPARC_TLS_IE_ADD
1973 ENUMX
1974   BFD_RELOC_SPARC_TLS_LE_HIX22
1975 ENUMX
1976   BFD_RELOC_SPARC_TLS_LE_LOX10
1977 ENUMX
1978   BFD_RELOC_SPARC_TLS_DTPMOD32
1979 ENUMX
1980   BFD_RELOC_SPARC_TLS_DTPMOD64
1981 ENUMX
1982   BFD_RELOC_SPARC_TLS_DTPOFF32
1983 ENUMX
1984   BFD_RELOC_SPARC_TLS_DTPOFF64
1985 ENUMX
1986   BFD_RELOC_SPARC_TLS_TPOFF32
1987 ENUMX
1988   BFD_RELOC_SPARC_TLS_TPOFF64
1989 ENUMDOC
1990   SPARC TLS relocations
1991
1992 ENUM
1993   BFD_RELOC_SPU_IMM7
1994 ENUMX
1995   BFD_RELOC_SPU_IMM8
1996 ENUMX
1997   BFD_RELOC_SPU_IMM10
1998 ENUMX
1999   BFD_RELOC_SPU_IMM10W
2000 ENUMX
2001   BFD_RELOC_SPU_IMM16
2002 ENUMX
2003   BFD_RELOC_SPU_IMM16W
2004 ENUMX
2005   BFD_RELOC_SPU_IMM18
2006 ENUMX
2007   BFD_RELOC_SPU_PCREL9a
2008 ENUMX
2009   BFD_RELOC_SPU_PCREL9b
2010 ENUMX
2011   BFD_RELOC_SPU_PCREL16
2012 ENUMX
2013   BFD_RELOC_SPU_LO16
2014 ENUMX
2015   BFD_RELOC_SPU_HI16
2016 ENUMX
2017   BFD_RELOC_SPU_PPU32
2018 ENUMX
2019   BFD_RELOC_SPU_PPU64
2020 ENUMDOC
2021   SPU Relocations.
2022
2023 ENUM
2024   BFD_RELOC_ALPHA_GPDISP_HI16
2025 ENUMDOC
2026   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2027      "addend" in some special way.
2028   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2029      writing; when reading, it will be the absolute section symbol.  The
2030      addend is the displacement in bytes of the "lda" instruction from
2031      the "ldah" instruction (which is at the address of this reloc).
2032 ENUM
2033   BFD_RELOC_ALPHA_GPDISP_LO16
2034 ENUMDOC
2035   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2036      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2037      relocations out, and is filled in with the file's GP value on
2038      reading, for convenience.
2039
2040 ENUM
2041   BFD_RELOC_ALPHA_GPDISP
2042 ENUMDOC
2043   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2044      relocation except that there is no accompanying GPDISP_LO16
2045      relocation.
2046
2047 ENUM
2048   BFD_RELOC_ALPHA_LITERAL
2049 ENUMX
2050   BFD_RELOC_ALPHA_ELF_LITERAL
2051 ENUMX
2052   BFD_RELOC_ALPHA_LITUSE
2053 ENUMDOC
2054   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2055      the assembler turns it into a LDQ instruction to load the address of
2056      the symbol, and then fills in a register in the real instruction.
2057
2058      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2059      section symbol.  The addend is ignored when writing, but is filled
2060      in with the file's GP value on reading, for convenience, as with the
2061      GPDISP_LO16 reloc.
2062
2063      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2064      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2065      but it generates output not based on the position within the .got
2066      section, but relative to the GP value chosen for the file during the
2067      final link stage.
2068
2069      The LITUSE reloc, on the instruction using the loaded address, gives
2070      information to the linker that it might be able to use to optimize
2071      away some literal section references.  The symbol is ignored (read
2072      as the absolute section symbol), and the "addend" indicates the type
2073      of instruction using the register:
2074               1 - "memory" fmt insn
2075               2 - byte-manipulation (byte offset reg)
2076               3 - jsr (target of branch)
2077
2078 ENUM
2079   BFD_RELOC_ALPHA_HINT
2080 ENUMDOC
2081   The HINT relocation indicates a value that should be filled into the
2082      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2083      prediction logic which may be provided on some processors.
2084
2085 ENUM
2086   BFD_RELOC_ALPHA_LINKAGE
2087 ENUMDOC
2088   The LINKAGE relocation outputs a linkage pair in the object file,
2089      which is filled by the linker.
2090
2091 ENUM
2092   BFD_RELOC_ALPHA_CODEADDR
2093 ENUMDOC
2094   The CODEADDR relocation outputs a STO_CA in the object file,
2095      which is filled by the linker.
2096
2097 ENUM
2098   BFD_RELOC_ALPHA_GPREL_HI16
2099 ENUMX
2100   BFD_RELOC_ALPHA_GPREL_LO16
2101 ENUMDOC
2102   The GPREL_HI/LO relocations together form a 32-bit offset from the
2103      GP register.
2104
2105 ENUM
2106   BFD_RELOC_ALPHA_BRSGP
2107 ENUMDOC
2108   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2109   share a common GP, and the target address is adjusted for
2110   STO_ALPHA_STD_GPLOAD.
2111
2112 ENUM
2113   BFD_RELOC_ALPHA_NOP
2114 ENUMDOC
2115   The NOP relocation outputs a NOP if the longword displacement
2116      between two procedure entry points is < 2^21.
2117
2118 ENUM
2119   BFD_RELOC_ALPHA_BSR
2120 ENUMDOC
2121   The BSR relocation outputs a BSR if the longword displacement
2122      between two procedure entry points is < 2^21.
2123
2124 ENUM
2125   BFD_RELOC_ALPHA_LDA
2126 ENUMDOC
2127   The LDA relocation outputs a LDA if the longword displacement
2128      between two procedure entry points is < 2^16.
2129
2130 ENUM
2131   BFD_RELOC_ALPHA_BOH
2132 ENUMDOC
2133   The BOH relocation outputs a BSR if the longword displacement
2134      between two procedure entry points is < 2^21, or else a hint.
2135
2136 ENUM
2137   BFD_RELOC_ALPHA_TLSGD
2138 ENUMX
2139   BFD_RELOC_ALPHA_TLSLDM
2140 ENUMX
2141   BFD_RELOC_ALPHA_DTPMOD64
2142 ENUMX
2143   BFD_RELOC_ALPHA_GOTDTPREL16
2144 ENUMX
2145   BFD_RELOC_ALPHA_DTPREL64
2146 ENUMX
2147   BFD_RELOC_ALPHA_DTPREL_HI16
2148 ENUMX
2149   BFD_RELOC_ALPHA_DTPREL_LO16
2150 ENUMX
2151   BFD_RELOC_ALPHA_DTPREL16
2152 ENUMX
2153   BFD_RELOC_ALPHA_GOTTPREL16
2154 ENUMX
2155   BFD_RELOC_ALPHA_TPREL64
2156 ENUMX
2157   BFD_RELOC_ALPHA_TPREL_HI16
2158 ENUMX
2159   BFD_RELOC_ALPHA_TPREL_LO16
2160 ENUMX
2161   BFD_RELOC_ALPHA_TPREL16
2162 ENUMDOC
2163   Alpha thread-local storage relocations.
2164
2165 ENUM
2166   BFD_RELOC_MIPS_JMP
2167 ENUMDOC
2168   Bits 27..2 of the relocation address shifted right 2 bits;
2169      simple reloc otherwise.
2170
2171 ENUM
2172   BFD_RELOC_MIPS16_JMP
2173 ENUMDOC
2174   The MIPS16 jump instruction.
2175
2176 ENUM
2177   BFD_RELOC_MIPS16_GPREL
2178 ENUMDOC
2179   MIPS16 GP relative reloc.
2180
2181 ENUM
2182   BFD_RELOC_HI16
2183 ENUMDOC
2184   High 16 bits of 32-bit value; simple reloc.
2185 ENUM
2186   BFD_RELOC_HI16_S
2187 ENUMDOC
2188   High 16 bits of 32-bit value but the low 16 bits will be sign
2189      extended and added to form the final result.  If the low 16
2190      bits form a negative number, we need to add one to the high value
2191      to compensate for the borrow when the low bits are added.
2192 ENUM
2193   BFD_RELOC_LO16
2194 ENUMDOC
2195   Low 16 bits.
2196
2197 ENUM
2198   BFD_RELOC_HI16_PCREL
2199 ENUMDOC
2200   High 16 bits of 32-bit pc-relative value
2201 ENUM
2202   BFD_RELOC_HI16_S_PCREL
2203 ENUMDOC
2204   High 16 bits of 32-bit pc-relative value, adjusted
2205 ENUM
2206   BFD_RELOC_LO16_PCREL
2207 ENUMDOC
2208   Low 16 bits of pc-relative value
2209
2210 ENUM
2211   BFD_RELOC_MIPS16_GOT16
2212 ENUMX
2213   BFD_RELOC_MIPS16_CALL16
2214 ENUMDOC
2215   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2216      16-bit immediate fields
2217 ENUM
2218   BFD_RELOC_MIPS16_HI16
2219 ENUMDOC
2220   MIPS16 high 16 bits of 32-bit value.
2221 ENUM
2222   BFD_RELOC_MIPS16_HI16_S
2223 ENUMDOC
2224   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2225      extended and added to form the final result.  If the low 16
2226      bits form a negative number, we need to add one to the high value
2227      to compensate for the borrow when the low bits are added.
2228 ENUM
2229   BFD_RELOC_MIPS16_LO16
2230 ENUMDOC
2231   MIPS16 low 16 bits.
2232
2233 ENUM
2234   BFD_RELOC_MIPS_LITERAL
2235 ENUMDOC
2236   Relocation against a MIPS literal section.
2237
2238 ENUM
2239   BFD_RELOC_MIPS_GOT16
2240 ENUMX
2241   BFD_RELOC_MIPS_CALL16
2242 ENUMX
2243   BFD_RELOC_MIPS_GOT_HI16
2244 ENUMX
2245   BFD_RELOC_MIPS_GOT_LO16
2246 ENUMX
2247   BFD_RELOC_MIPS_CALL_HI16
2248 ENUMX
2249   BFD_RELOC_MIPS_CALL_LO16
2250 ENUMX
2251   BFD_RELOC_MIPS_SUB
2252 ENUMX
2253   BFD_RELOC_MIPS_GOT_PAGE
2254 ENUMX
2255   BFD_RELOC_MIPS_GOT_OFST
2256 ENUMX
2257   BFD_RELOC_MIPS_GOT_DISP
2258 ENUMX
2259   BFD_RELOC_MIPS_SHIFT5
2260 ENUMX
2261   BFD_RELOC_MIPS_SHIFT6
2262 ENUMX
2263   BFD_RELOC_MIPS_INSERT_A
2264 ENUMX
2265   BFD_RELOC_MIPS_INSERT_B
2266 ENUMX
2267   BFD_RELOC_MIPS_DELETE
2268 ENUMX
2269   BFD_RELOC_MIPS_HIGHEST
2270 ENUMX
2271   BFD_RELOC_MIPS_HIGHER
2272 ENUMX
2273   BFD_RELOC_MIPS_SCN_DISP
2274 ENUMX
2275   BFD_RELOC_MIPS_REL16
2276 ENUMX
2277   BFD_RELOC_MIPS_RELGOT
2278 ENUMX
2279   BFD_RELOC_MIPS_JALR
2280 ENUMX
2281   BFD_RELOC_MIPS_TLS_DTPMOD32
2282 ENUMX
2283   BFD_RELOC_MIPS_TLS_DTPREL32
2284 ENUMX
2285   BFD_RELOC_MIPS_TLS_DTPMOD64
2286 ENUMX
2287   BFD_RELOC_MIPS_TLS_DTPREL64
2288 ENUMX
2289   BFD_RELOC_MIPS_TLS_GD
2290 ENUMX
2291   BFD_RELOC_MIPS_TLS_LDM
2292 ENUMX
2293   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2294 ENUMX
2295   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2296 ENUMX
2297   BFD_RELOC_MIPS_TLS_GOTTPREL
2298 ENUMX
2299   BFD_RELOC_MIPS_TLS_TPREL32
2300 ENUMX
2301   BFD_RELOC_MIPS_TLS_TPREL64
2302 ENUMX
2303   BFD_RELOC_MIPS_TLS_TPREL_HI16
2304 ENUMX
2305   BFD_RELOC_MIPS_TLS_TPREL_LO16
2306 ENUMDOC
2307   MIPS ELF relocations.
2308 COMMENT
2309
2310 ENUM
2311   BFD_RELOC_MIPS_COPY
2312 ENUMX
2313   BFD_RELOC_MIPS_JUMP_SLOT
2314 ENUMDOC
2315   MIPS ELF relocations (VxWorks and PLT extensions).
2316 COMMENT
2317
2318 ENUM
2319   BFD_RELOC_FRV_LABEL16
2320 ENUMX
2321   BFD_RELOC_FRV_LABEL24
2322 ENUMX
2323   BFD_RELOC_FRV_LO16
2324 ENUMX
2325   BFD_RELOC_FRV_HI16
2326 ENUMX
2327   BFD_RELOC_FRV_GPREL12
2328 ENUMX
2329   BFD_RELOC_FRV_GPRELU12
2330 ENUMX
2331   BFD_RELOC_FRV_GPREL32
2332 ENUMX
2333   BFD_RELOC_FRV_GPRELHI
2334 ENUMX
2335   BFD_RELOC_FRV_GPRELLO
2336 ENUMX
2337   BFD_RELOC_FRV_GOT12
2338 ENUMX
2339   BFD_RELOC_FRV_GOTHI
2340 ENUMX
2341   BFD_RELOC_FRV_GOTLO
2342 ENUMX
2343   BFD_RELOC_FRV_FUNCDESC
2344 ENUMX
2345   BFD_RELOC_FRV_FUNCDESC_GOT12
2346 ENUMX
2347   BFD_RELOC_FRV_FUNCDESC_GOTHI
2348 ENUMX
2349   BFD_RELOC_FRV_FUNCDESC_GOTLO
2350 ENUMX
2351   BFD_RELOC_FRV_FUNCDESC_VALUE
2352 ENUMX
2353   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2354 ENUMX
2355   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2356 ENUMX
2357   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2358 ENUMX
2359   BFD_RELOC_FRV_GOTOFF12
2360 ENUMX
2361   BFD_RELOC_FRV_GOTOFFHI
2362 ENUMX
2363   BFD_RELOC_FRV_GOTOFFLO
2364 ENUMX
2365   BFD_RELOC_FRV_GETTLSOFF
2366 ENUMX
2367   BFD_RELOC_FRV_TLSDESC_VALUE
2368 ENUMX
2369   BFD_RELOC_FRV_GOTTLSDESC12
2370 ENUMX
2371   BFD_RELOC_FRV_GOTTLSDESCHI
2372 ENUMX
2373   BFD_RELOC_FRV_GOTTLSDESCLO
2374 ENUMX
2375   BFD_RELOC_FRV_TLSMOFF12
2376 ENUMX
2377   BFD_RELOC_FRV_TLSMOFFHI
2378 ENUMX
2379   BFD_RELOC_FRV_TLSMOFFLO
2380 ENUMX
2381   BFD_RELOC_FRV_GOTTLSOFF12
2382 ENUMX
2383   BFD_RELOC_FRV_GOTTLSOFFHI
2384 ENUMX
2385   BFD_RELOC_FRV_GOTTLSOFFLO
2386 ENUMX
2387   BFD_RELOC_FRV_TLSOFF
2388 ENUMX
2389   BFD_RELOC_FRV_TLSDESC_RELAX
2390 ENUMX
2391   BFD_RELOC_FRV_GETTLSOFF_RELAX
2392 ENUMX
2393   BFD_RELOC_FRV_TLSOFF_RELAX
2394 ENUMX
2395   BFD_RELOC_FRV_TLSMOFF
2396 ENUMDOC
2397   Fujitsu Frv Relocations.
2398 COMMENT
2399
2400 ENUM
2401   BFD_RELOC_MN10300_GOTOFF24
2402 ENUMDOC
2403   This is a 24bit GOT-relative reloc for the mn10300.
2404 ENUM
2405   BFD_RELOC_MN10300_GOT32
2406 ENUMDOC
2407   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2408   in the instruction.
2409 ENUM
2410   BFD_RELOC_MN10300_GOT24
2411 ENUMDOC
2412   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2413   in the instruction.
2414 ENUM
2415   BFD_RELOC_MN10300_GOT16
2416 ENUMDOC
2417   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2418   in the instruction.
2419 ENUM
2420   BFD_RELOC_MN10300_COPY
2421 ENUMDOC
2422   Copy symbol at runtime.
2423 ENUM
2424   BFD_RELOC_MN10300_GLOB_DAT
2425 ENUMDOC
2426   Create GOT entry.
2427 ENUM
2428   BFD_RELOC_MN10300_JMP_SLOT
2429 ENUMDOC
2430   Create PLT entry.
2431 ENUM
2432   BFD_RELOC_MN10300_RELATIVE
2433 ENUMDOC
2434   Adjust by program base.
2435 ENUM
2436   BFD_RELOC_MN10300_SYM_DIFF
2437 ENUMDOC
2438   Together with another reloc targeted at the same location,
2439   allows for a value that is the difference of two symbols
2440   in the same section.
2441 ENUM
2442   BFD_RELOC_MN10300_ALIGN
2443 ENUMDOC
2444   The addend of this reloc is an alignment power that must
2445   be honoured at the offset's location, regardless of linker
2446   relaxation.
2447 COMMENT
2448
2449 ENUM
2450   BFD_RELOC_386_GOT32
2451 ENUMX
2452   BFD_RELOC_386_PLT32
2453 ENUMX
2454   BFD_RELOC_386_COPY
2455 ENUMX
2456   BFD_RELOC_386_GLOB_DAT
2457 ENUMX
2458   BFD_RELOC_386_JUMP_SLOT
2459 ENUMX
2460   BFD_RELOC_386_RELATIVE
2461 ENUMX
2462   BFD_RELOC_386_GOTOFF
2463 ENUMX
2464   BFD_RELOC_386_GOTPC
2465 ENUMX
2466   BFD_RELOC_386_TLS_TPOFF
2467 ENUMX
2468   BFD_RELOC_386_TLS_IE
2469 ENUMX
2470   BFD_RELOC_386_TLS_GOTIE
2471 ENUMX
2472   BFD_RELOC_386_TLS_LE
2473 ENUMX
2474   BFD_RELOC_386_TLS_GD
2475 ENUMX
2476   BFD_RELOC_386_TLS_LDM
2477 ENUMX
2478   BFD_RELOC_386_TLS_LDO_32
2479 ENUMX
2480   BFD_RELOC_386_TLS_IE_32
2481 ENUMX
2482   BFD_RELOC_386_TLS_LE_32
2483 ENUMX
2484   BFD_RELOC_386_TLS_DTPMOD32
2485 ENUMX
2486   BFD_RELOC_386_TLS_DTPOFF32
2487 ENUMX
2488   BFD_RELOC_386_TLS_TPOFF32
2489 ENUMX
2490   BFD_RELOC_386_TLS_GOTDESC
2491 ENUMX
2492   BFD_RELOC_386_TLS_DESC_CALL
2493 ENUMX
2494   BFD_RELOC_386_TLS_DESC
2495 ENUMDOC
2496   i386/elf relocations
2497
2498 ENUM
2499   BFD_RELOC_X86_64_GOT32
2500 ENUMX
2501   BFD_RELOC_X86_64_PLT32
2502 ENUMX
2503   BFD_RELOC_X86_64_COPY
2504 ENUMX
2505   BFD_RELOC_X86_64_GLOB_DAT
2506 ENUMX
2507   BFD_RELOC_X86_64_JUMP_SLOT
2508 ENUMX
2509   BFD_RELOC_X86_64_RELATIVE
2510 ENUMX
2511   BFD_RELOC_X86_64_GOTPCREL
2512 ENUMX
2513   BFD_RELOC_X86_64_32S
2514 ENUMX
2515   BFD_RELOC_X86_64_DTPMOD64
2516 ENUMX
2517   BFD_RELOC_X86_64_DTPOFF64
2518 ENUMX
2519   BFD_RELOC_X86_64_TPOFF64
2520 ENUMX
2521   BFD_RELOC_X86_64_TLSGD
2522 ENUMX
2523   BFD_RELOC_X86_64_TLSLD
2524 ENUMX
2525   BFD_RELOC_X86_64_DTPOFF32
2526 ENUMX
2527   BFD_RELOC_X86_64_GOTTPOFF
2528 ENUMX
2529   BFD_RELOC_X86_64_TPOFF32
2530 ENUMX
2531   BFD_RELOC_X86_64_GOTOFF64
2532 ENUMX
2533   BFD_RELOC_X86_64_GOTPC32
2534 ENUMX
2535   BFD_RELOC_X86_64_GOT64
2536 ENUMX
2537   BFD_RELOC_X86_64_GOTPCREL64
2538 ENUMX
2539   BFD_RELOC_X86_64_GOTPC64
2540 ENUMX
2541   BFD_RELOC_X86_64_GOTPLT64
2542 ENUMX
2543   BFD_RELOC_X86_64_PLTOFF64
2544 ENUMX
2545   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2546 ENUMX
2547   BFD_RELOC_X86_64_TLSDESC_CALL
2548 ENUMX
2549   BFD_RELOC_X86_64_TLSDESC
2550 ENUMDOC
2551   x86-64/elf relocations
2552
2553 ENUM
2554   BFD_RELOC_NS32K_IMM_8
2555 ENUMX
2556   BFD_RELOC_NS32K_IMM_16
2557 ENUMX
2558   BFD_RELOC_NS32K_IMM_32
2559 ENUMX
2560   BFD_RELOC_NS32K_IMM_8_PCREL
2561 ENUMX
2562   BFD_RELOC_NS32K_IMM_16_PCREL
2563 ENUMX
2564   BFD_RELOC_NS32K_IMM_32_PCREL
2565 ENUMX
2566   BFD_RELOC_NS32K_DISP_8
2567 ENUMX
2568   BFD_RELOC_NS32K_DISP_16
2569 ENUMX
2570   BFD_RELOC_NS32K_DISP_32
2571 ENUMX
2572   BFD_RELOC_NS32K_DISP_8_PCREL
2573 ENUMX
2574   BFD_RELOC_NS32K_DISP_16_PCREL
2575 ENUMX
2576   BFD_RELOC_NS32K_DISP_32_PCREL
2577 ENUMDOC
2578   ns32k relocations
2579
2580 ENUM
2581   BFD_RELOC_PDP11_DISP_8_PCREL
2582 ENUMX
2583   BFD_RELOC_PDP11_DISP_6_PCREL
2584 ENUMDOC
2585   PDP11 relocations
2586
2587 ENUM
2588   BFD_RELOC_PJ_CODE_HI16
2589 ENUMX
2590   BFD_RELOC_PJ_CODE_LO16
2591 ENUMX
2592   BFD_RELOC_PJ_CODE_DIR16
2593 ENUMX
2594   BFD_RELOC_PJ_CODE_DIR32
2595 ENUMX
2596   BFD_RELOC_PJ_CODE_REL16
2597 ENUMX
2598   BFD_RELOC_PJ_CODE_REL32
2599 ENUMDOC
2600   Picojava relocs.  Not all of these appear in object files.
2601
2602 ENUM
2603   BFD_RELOC_PPC_B26
2604 ENUMX
2605   BFD_RELOC_PPC_BA26
2606 ENUMX
2607   BFD_RELOC_PPC_TOC16
2608 ENUMX
2609   BFD_RELOC_PPC_B16
2610 ENUMX
2611   BFD_RELOC_PPC_B16_BRTAKEN
2612 ENUMX
2613   BFD_RELOC_PPC_B16_BRNTAKEN
2614 ENUMX
2615   BFD_RELOC_PPC_BA16
2616 ENUMX
2617   BFD_RELOC_PPC_BA16_BRTAKEN
2618 ENUMX
2619   BFD_RELOC_PPC_BA16_BRNTAKEN
2620 ENUMX
2621   BFD_RELOC_PPC_COPY
2622 ENUMX
2623   BFD_RELOC_PPC_GLOB_DAT
2624 ENUMX
2625   BFD_RELOC_PPC_JMP_SLOT
2626 ENUMX
2627   BFD_RELOC_PPC_RELATIVE
2628 ENUMX
2629   BFD_RELOC_PPC_LOCAL24PC
2630 ENUMX
2631   BFD_RELOC_PPC_EMB_NADDR32
2632 ENUMX
2633   BFD_RELOC_PPC_EMB_NADDR16
2634 ENUMX
2635   BFD_RELOC_PPC_EMB_NADDR16_LO
2636 ENUMX
2637   BFD_RELOC_PPC_EMB_NADDR16_HI
2638 ENUMX
2639   BFD_RELOC_PPC_EMB_NADDR16_HA
2640 ENUMX
2641   BFD_RELOC_PPC_EMB_SDAI16
2642 ENUMX
2643   BFD_RELOC_PPC_EMB_SDA2I16
2644 ENUMX
2645   BFD_RELOC_PPC_EMB_SDA2REL
2646 ENUMX
2647   BFD_RELOC_PPC_EMB_SDA21
2648 ENUMX
2649   BFD_RELOC_PPC_EMB_MRKREF
2650 ENUMX
2651   BFD_RELOC_PPC_EMB_RELSEC16
2652 ENUMX
2653   BFD_RELOC_PPC_EMB_RELST_LO
2654 ENUMX
2655   BFD_RELOC_PPC_EMB_RELST_HI
2656 ENUMX
2657   BFD_RELOC_PPC_EMB_RELST_HA
2658 ENUMX
2659   BFD_RELOC_PPC_EMB_BIT_FLD
2660 ENUMX
2661   BFD_RELOC_PPC_EMB_RELSDA
2662 ENUMX
2663   BFD_RELOC_PPC64_HIGHER
2664 ENUMX
2665   BFD_RELOC_PPC64_HIGHER_S
2666 ENUMX
2667   BFD_RELOC_PPC64_HIGHEST
2668 ENUMX
2669   BFD_RELOC_PPC64_HIGHEST_S
2670 ENUMX
2671   BFD_RELOC_PPC64_TOC16_LO
2672 ENUMX
2673   BFD_RELOC_PPC64_TOC16_HI
2674 ENUMX
2675   BFD_RELOC_PPC64_TOC16_HA
2676 ENUMX
2677   BFD_RELOC_PPC64_TOC
2678 ENUMX
2679   BFD_RELOC_PPC64_PLTGOT16
2680 ENUMX
2681   BFD_RELOC_PPC64_PLTGOT16_LO
2682 ENUMX
2683   BFD_RELOC_PPC64_PLTGOT16_HI
2684 ENUMX
2685   BFD_RELOC_PPC64_PLTGOT16_HA
2686 ENUMX
2687   BFD_RELOC_PPC64_ADDR16_DS
2688 ENUMX
2689   BFD_RELOC_PPC64_ADDR16_LO_DS
2690 ENUMX
2691   BFD_RELOC_PPC64_GOT16_DS
2692 ENUMX
2693   BFD_RELOC_PPC64_GOT16_LO_DS
2694 ENUMX
2695   BFD_RELOC_PPC64_PLT16_LO_DS
2696 ENUMX
2697   BFD_RELOC_PPC64_SECTOFF_DS
2698 ENUMX
2699   BFD_RELOC_PPC64_SECTOFF_LO_DS
2700 ENUMX
2701   BFD_RELOC_PPC64_TOC16_DS
2702 ENUMX
2703   BFD_RELOC_PPC64_TOC16_LO_DS
2704 ENUMX
2705   BFD_RELOC_PPC64_PLTGOT16_DS
2706 ENUMX
2707   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2708 ENUMDOC
2709   Power(rs6000) and PowerPC relocations.
2710
2711 ENUM
2712   BFD_RELOC_PPC_TLS
2713 ENUMX
2714   BFD_RELOC_PPC_TLSGD
2715 ENUMX
2716   BFD_RELOC_PPC_TLSLD
2717 ENUMX
2718   BFD_RELOC_PPC_DTPMOD
2719 ENUMX
2720   BFD_RELOC_PPC_TPREL16
2721 ENUMX
2722   BFD_RELOC_PPC_TPREL16_LO
2723 ENUMX
2724   BFD_RELOC_PPC_TPREL16_HI
2725 ENUMX
2726   BFD_RELOC_PPC_TPREL16_HA
2727 ENUMX
2728   BFD_RELOC_PPC_TPREL
2729 ENUMX
2730   BFD_RELOC_PPC_DTPREL16
2731 ENUMX
2732   BFD_RELOC_PPC_DTPREL16_LO
2733 ENUMX
2734   BFD_RELOC_PPC_DTPREL16_HI
2735 ENUMX
2736   BFD_RELOC_PPC_DTPREL16_HA
2737 ENUMX
2738   BFD_RELOC_PPC_DTPREL
2739 ENUMX
2740   BFD_RELOC_PPC_GOT_TLSGD16
2741 ENUMX
2742   BFD_RELOC_PPC_GOT_TLSGD16_LO
2743 ENUMX
2744   BFD_RELOC_PPC_GOT_TLSGD16_HI
2745 ENUMX
2746   BFD_RELOC_PPC_GOT_TLSGD16_HA
2747 ENUMX
2748   BFD_RELOC_PPC_GOT_TLSLD16
2749 ENUMX
2750   BFD_RELOC_PPC_GOT_TLSLD16_LO
2751 ENUMX
2752   BFD_RELOC_PPC_GOT_TLSLD16_HI
2753 ENUMX
2754   BFD_RELOC_PPC_GOT_TLSLD16_HA
2755 ENUMX
2756   BFD_RELOC_PPC_GOT_TPREL16
2757 ENUMX
2758   BFD_RELOC_PPC_GOT_TPREL16_LO
2759 ENUMX
2760   BFD_RELOC_PPC_GOT_TPREL16_HI
2761 ENUMX
2762   BFD_RELOC_PPC_GOT_TPREL16_HA
2763 ENUMX
2764   BFD_RELOC_PPC_GOT_DTPREL16
2765 ENUMX
2766   BFD_RELOC_PPC_GOT_DTPREL16_LO
2767 ENUMX
2768   BFD_RELOC_PPC_GOT_DTPREL16_HI
2769 ENUMX
2770   BFD_RELOC_PPC_GOT_DTPREL16_HA
2771 ENUMX
2772   BFD_RELOC_PPC64_TPREL16_DS
2773 ENUMX
2774   BFD_RELOC_PPC64_TPREL16_LO_DS
2775 ENUMX
2776   BFD_RELOC_PPC64_TPREL16_HIGHER
2777 ENUMX
2778   BFD_RELOC_PPC64_TPREL16_HIGHERA
2779 ENUMX
2780   BFD_RELOC_PPC64_TPREL16_HIGHEST
2781 ENUMX
2782   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2783 ENUMX
2784   BFD_RELOC_PPC64_DTPREL16_DS
2785 ENUMX
2786   BFD_RELOC_PPC64_DTPREL16_LO_DS
2787 ENUMX
2788   BFD_RELOC_PPC64_DTPREL16_HIGHER
2789 ENUMX
2790   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2791 ENUMX
2792   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2793 ENUMX
2794   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2795 ENUMDOC
2796   PowerPC and PowerPC64 thread-local storage relocations.
2797
2798 ENUM
2799   BFD_RELOC_I370_D12
2800 ENUMDOC
2801   IBM 370/390 relocations
2802
2803 ENUM
2804   BFD_RELOC_CTOR
2805 ENUMDOC
2806   The type of reloc used to build a constructor table - at the moment
2807   probably a 32 bit wide absolute relocation, but the target can choose.
2808   It generally does map to one of the other relocation types.
2809
2810 ENUM
2811   BFD_RELOC_ARM_PCREL_BRANCH
2812 ENUMDOC
2813   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2814   not stored in the instruction.
2815 ENUM
2816   BFD_RELOC_ARM_PCREL_BLX
2817 ENUMDOC
2818   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2819   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2820   field in the instruction.
2821 ENUM
2822   BFD_RELOC_THUMB_PCREL_BLX
2823 ENUMDOC
2824   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2825   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2826   field in the instruction.
2827 ENUM
2828   BFD_RELOC_ARM_PCREL_CALL
2829 ENUMDOC
2830   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2831 ENUM
2832   BFD_RELOC_ARM_PCREL_JUMP
2833 ENUMDOC
2834   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2835
2836 ENUM
2837   BFD_RELOC_THUMB_PCREL_BRANCH7
2838 ENUMX
2839   BFD_RELOC_THUMB_PCREL_BRANCH9
2840 ENUMX
2841   BFD_RELOC_THUMB_PCREL_BRANCH12
2842 ENUMX
2843   BFD_RELOC_THUMB_PCREL_BRANCH20
2844 ENUMX
2845   BFD_RELOC_THUMB_PCREL_BRANCH23
2846 ENUMX
2847   BFD_RELOC_THUMB_PCREL_BRANCH25
2848 ENUMDOC
2849   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2850   The lowest bit must be zero and is not stored in the instruction.
2851   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2852   "nn" one smaller in all cases.  Note further that BRANCH23
2853   corresponds to R_ARM_THM_CALL.
2854
2855 ENUM
2856   BFD_RELOC_ARM_OFFSET_IMM
2857 ENUMDOC
2858   12-bit immediate offset, used in ARM-format ldr and str instructions.
2859
2860 ENUM
2861   BFD_RELOC_ARM_THUMB_OFFSET
2862 ENUMDOC
2863   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2864
2865 ENUM
2866   BFD_RELOC_ARM_TARGET1
2867 ENUMDOC
2868   Pc-relative or absolute relocation depending on target.  Used for
2869   entries in .init_array sections.
2870 ENUM
2871   BFD_RELOC_ARM_ROSEGREL32
2872 ENUMDOC
2873   Read-only segment base relative address.
2874 ENUM
2875   BFD_RELOC_ARM_SBREL32
2876 ENUMDOC
2877   Data segment base relative address.
2878 ENUM
2879   BFD_RELOC_ARM_TARGET2
2880 ENUMDOC
2881   This reloc is used for references to RTTI data from exception handling
2882   tables.  The actual definition depends on the target.  It may be a
2883   pc-relative or some form of GOT-indirect relocation.
2884 ENUM
2885   BFD_RELOC_ARM_PREL31
2886 ENUMDOC
2887   31-bit PC relative address.
2888 ENUM
2889   BFD_RELOC_ARM_MOVW
2890 ENUMX
2891   BFD_RELOC_ARM_MOVT
2892 ENUMX
2893   BFD_RELOC_ARM_MOVW_PCREL
2894 ENUMX
2895   BFD_RELOC_ARM_MOVT_PCREL
2896 ENUMX
2897   BFD_RELOC_ARM_THUMB_MOVW
2898 ENUMX
2899   BFD_RELOC_ARM_THUMB_MOVT
2900 ENUMX
2901   BFD_RELOC_ARM_THUMB_MOVW_PCREL
2902 ENUMX
2903   BFD_RELOC_ARM_THUMB_MOVT_PCREL
2904 ENUMDOC
2905   Low and High halfword relocations for MOVW and MOVT instructions.
2906
2907 ENUM
2908   BFD_RELOC_ARM_JUMP_SLOT
2909 ENUMX
2910   BFD_RELOC_ARM_GLOB_DAT
2911 ENUMX
2912   BFD_RELOC_ARM_GOT32
2913 ENUMX
2914   BFD_RELOC_ARM_PLT32
2915 ENUMX
2916   BFD_RELOC_ARM_RELATIVE
2917 ENUMX
2918   BFD_RELOC_ARM_GOTOFF
2919 ENUMX
2920   BFD_RELOC_ARM_GOTPC
2921 ENUMDOC
2922   Relocations for setting up GOTs and PLTs for shared libraries.
2923
2924 ENUM
2925   BFD_RELOC_ARM_TLS_GD32
2926 ENUMX
2927   BFD_RELOC_ARM_TLS_LDO32
2928 ENUMX
2929   BFD_RELOC_ARM_TLS_LDM32
2930 ENUMX
2931   BFD_RELOC_ARM_TLS_DTPOFF32
2932 ENUMX
2933   BFD_RELOC_ARM_TLS_DTPMOD32
2934 ENUMX
2935   BFD_RELOC_ARM_TLS_TPOFF32
2936 ENUMX
2937   BFD_RELOC_ARM_TLS_IE32
2938 ENUMX
2939   BFD_RELOC_ARM_TLS_LE32
2940 ENUMDOC
2941   ARM thread-local storage relocations.
2942
2943 ENUM
2944   BFD_RELOC_ARM_ALU_PC_G0_NC
2945 ENUMX
2946   BFD_RELOC_ARM_ALU_PC_G0
2947 ENUMX
2948   BFD_RELOC_ARM_ALU_PC_G1_NC
2949 ENUMX
2950   BFD_RELOC_ARM_ALU_PC_G1
2951 ENUMX
2952   BFD_RELOC_ARM_ALU_PC_G2
2953 ENUMX
2954   BFD_RELOC_ARM_LDR_PC_G0
2955 ENUMX
2956   BFD_RELOC_ARM_LDR_PC_G1
2957 ENUMX
2958   BFD_RELOC_ARM_LDR_PC_G2
2959 ENUMX
2960   BFD_RELOC_ARM_LDRS_PC_G0
2961 ENUMX
2962   BFD_RELOC_ARM_LDRS_PC_G1
2963 ENUMX
2964   BFD_RELOC_ARM_LDRS_PC_G2
2965 ENUMX
2966   BFD_RELOC_ARM_LDC_PC_G0
2967 ENUMX
2968   BFD_RELOC_ARM_LDC_PC_G1
2969 ENUMX
2970   BFD_RELOC_ARM_LDC_PC_G2
2971 ENUMX
2972   BFD_RELOC_ARM_ALU_SB_G0_NC
2973 ENUMX
2974   BFD_RELOC_ARM_ALU_SB_G0
2975 ENUMX
2976   BFD_RELOC_ARM_ALU_SB_G1_NC
2977 ENUMX
2978   BFD_RELOC_ARM_ALU_SB_G1
2979 ENUMX
2980   BFD_RELOC_ARM_ALU_SB_G2
2981 ENUMX
2982   BFD_RELOC_ARM_LDR_SB_G0
2983 ENUMX
2984   BFD_RELOC_ARM_LDR_SB_G1
2985 ENUMX
2986   BFD_RELOC_ARM_LDR_SB_G2
2987 ENUMX
2988   BFD_RELOC_ARM_LDRS_SB_G0
2989 ENUMX
2990   BFD_RELOC_ARM_LDRS_SB_G1
2991 ENUMX
2992   BFD_RELOC_ARM_LDRS_SB_G2
2993 ENUMX
2994   BFD_RELOC_ARM_LDC_SB_G0
2995 ENUMX
2996   BFD_RELOC_ARM_LDC_SB_G1
2997 ENUMX
2998   BFD_RELOC_ARM_LDC_SB_G2
2999 ENUMDOC
3000   ARM group relocations.
3001
3002 ENUM
3003   BFD_RELOC_ARM_V4BX
3004 ENUMDOC
3005   Annotation of BX instructions.
3006
3007 ENUM
3008   BFD_RELOC_ARM_IMMEDIATE
3009 ENUMX
3010   BFD_RELOC_ARM_ADRL_IMMEDIATE
3011 ENUMX
3012   BFD_RELOC_ARM_T32_IMMEDIATE
3013 ENUMX
3014   BFD_RELOC_ARM_T32_ADD_IMM
3015 ENUMX
3016   BFD_RELOC_ARM_T32_IMM12
3017 ENUMX
3018   BFD_RELOC_ARM_T32_ADD_PC12
3019 ENUMX
3020   BFD_RELOC_ARM_SHIFT_IMM
3021 ENUMX
3022   BFD_RELOC_ARM_SMC
3023 ENUMX
3024   BFD_RELOC_ARM_SWI
3025 ENUMX
3026   BFD_RELOC_ARM_MULTI
3027 ENUMX
3028   BFD_RELOC_ARM_CP_OFF_IMM
3029 ENUMX
3030   BFD_RELOC_ARM_CP_OFF_IMM_S2
3031 ENUMX
3032   BFD_RELOC_ARM_T32_CP_OFF_IMM
3033 ENUMX
3034   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3035 ENUMX
3036   BFD_RELOC_ARM_ADR_IMM
3037 ENUMX
3038   BFD_RELOC_ARM_LDR_IMM
3039 ENUMX
3040   BFD_RELOC_ARM_LITERAL
3041 ENUMX
3042   BFD_RELOC_ARM_IN_POOL
3043 ENUMX
3044   BFD_RELOC_ARM_OFFSET_IMM8
3045 ENUMX
3046   BFD_RELOC_ARM_T32_OFFSET_U8
3047 ENUMX
3048   BFD_RELOC_ARM_T32_OFFSET_IMM
3049 ENUMX
3050   BFD_RELOC_ARM_HWLITERAL
3051 ENUMX
3052   BFD_RELOC_ARM_THUMB_ADD
3053 ENUMX
3054   BFD_RELOC_ARM_THUMB_IMM
3055 ENUMX
3056   BFD_RELOC_ARM_THUMB_SHIFT
3057 ENUMDOC
3058   These relocs are only used within the ARM assembler.  They are not
3059   (at present) written to any object files.
3060
3061 ENUM
3062   BFD_RELOC_SH_PCDISP8BY2
3063 ENUMX
3064   BFD_RELOC_SH_PCDISP12BY2
3065 ENUMX
3066   BFD_RELOC_SH_IMM3
3067 ENUMX
3068   BFD_RELOC_SH_IMM3U
3069 ENUMX
3070   BFD_RELOC_SH_DISP12
3071 ENUMX
3072   BFD_RELOC_SH_DISP12BY2
3073 ENUMX
3074   BFD_RELOC_SH_DISP12BY4
3075 ENUMX
3076   BFD_RELOC_SH_DISP12BY8
3077 ENUMX
3078   BFD_RELOC_SH_DISP20
3079 ENUMX
3080   BFD_RELOC_SH_DISP20BY8
3081 ENUMX
3082   BFD_RELOC_SH_IMM4
3083 ENUMX
3084   BFD_RELOC_SH_IMM4BY2
3085 ENUMX
3086   BFD_RELOC_SH_IMM4BY4
3087 ENUMX
3088   BFD_RELOC_SH_IMM8
3089 ENUMX
3090   BFD_RELOC_SH_IMM8BY2
3091 ENUMX
3092   BFD_RELOC_SH_IMM8BY4
3093 ENUMX
3094   BFD_RELOC_SH_PCRELIMM8BY2
3095 ENUMX
3096   BFD_RELOC_SH_PCRELIMM8BY4
3097 ENUMX
3098   BFD_RELOC_SH_SWITCH16
3099 ENUMX
3100   BFD_RELOC_SH_SWITCH32
3101 ENUMX
3102   BFD_RELOC_SH_USES
3103 ENUMX
3104   BFD_RELOC_SH_COUNT
3105 ENUMX
3106   BFD_RELOC_SH_ALIGN
3107 ENUMX
3108   BFD_RELOC_SH_CODE
3109 ENUMX
3110   BFD_RELOC_SH_DATA
3111 ENUMX
3112   BFD_RELOC_SH_LABEL
3113 ENUMX
3114   BFD_RELOC_SH_LOOP_START
3115 ENUMX
3116   BFD_RELOC_SH_LOOP_END
3117 ENUMX
3118   BFD_RELOC_SH_COPY
3119 ENUMX
3120   BFD_RELOC_SH_GLOB_DAT
3121 ENUMX
3122   BFD_RELOC_SH_JMP_SLOT
3123 ENUMX
3124   BFD_RELOC_SH_RELATIVE
3125 ENUMX
3126   BFD_RELOC_SH_GOTPC
3127 ENUMX
3128   BFD_RELOC_SH_GOT_LOW16
3129 ENUMX
3130   BFD_RELOC_SH_GOT_MEDLOW16
3131 ENUMX
3132   BFD_RELOC_SH_GOT_MEDHI16
3133 ENUMX
3134   BFD_RELOC_SH_GOT_HI16
3135 ENUMX
3136   BFD_RELOC_SH_GOTPLT_LOW16
3137 ENUMX
3138   BFD_RELOC_SH_GOTPLT_MEDLOW16
3139 ENUMX
3140   BFD_RELOC_SH_GOTPLT_MEDHI16
3141 ENUMX
3142   BFD_RELOC_SH_GOTPLT_HI16
3143 ENUMX
3144   BFD_RELOC_SH_PLT_LOW16
3145 ENUMX
3146   BFD_RELOC_SH_PLT_MEDLOW16
3147 ENUMX
3148   BFD_RELOC_SH_PLT_MEDHI16
3149 ENUMX
3150   BFD_RELOC_SH_PLT_HI16
3151 ENUMX
3152   BFD_RELOC_SH_GOTOFF_LOW16
3153 ENUMX
3154   BFD_RELOC_SH_GOTOFF_MEDLOW16
3155 ENUMX
3156   BFD_RELOC_SH_GOTOFF_MEDHI16
3157 ENUMX
3158   BFD_RELOC_SH_GOTOFF_HI16
3159 ENUMX
3160   BFD_RELOC_SH_GOTPC_LOW16
3161 ENUMX
3162   BFD_RELOC_SH_GOTPC_MEDLOW16
3163 ENUMX
3164   BFD_RELOC_SH_GOTPC_MEDHI16
3165 ENUMX
3166   BFD_RELOC_SH_GOTPC_HI16
3167 ENUMX
3168   BFD_RELOC_SH_COPY64
3169 ENUMX
3170   BFD_RELOC_SH_GLOB_DAT64
3171 ENUMX
3172   BFD_RELOC_SH_JMP_SLOT64
3173 ENUMX
3174   BFD_RELOC_SH_RELATIVE64
3175 ENUMX
3176   BFD_RELOC_SH_GOT10BY4
3177 ENUMX
3178   BFD_RELOC_SH_GOT10BY8
3179 ENUMX
3180   BFD_RELOC_SH_GOTPLT10BY4
3181 ENUMX
3182   BFD_RELOC_SH_GOTPLT10BY8
3183 ENUMX
3184   BFD_RELOC_SH_GOTPLT32
3185 ENUMX
3186   BFD_RELOC_SH_SHMEDIA_CODE
3187 ENUMX
3188   BFD_RELOC_SH_IMMU5
3189 ENUMX
3190   BFD_RELOC_SH_IMMS6
3191 ENUMX
3192   BFD_RELOC_SH_IMMS6BY32
3193 ENUMX
3194   BFD_RELOC_SH_IMMU6
3195 ENUMX
3196   BFD_RELOC_SH_IMMS10
3197 ENUMX
3198   BFD_RELOC_SH_IMMS10BY2
3199 ENUMX
3200   BFD_RELOC_SH_IMMS10BY4
3201 ENUMX
3202   BFD_RELOC_SH_IMMS10BY8
3203 ENUMX
3204   BFD_RELOC_SH_IMMS16
3205 ENUMX
3206   BFD_RELOC_SH_IMMU16
3207 ENUMX
3208   BFD_RELOC_SH_IMM_LOW16
3209 ENUMX
3210   BFD_RELOC_SH_IMM_LOW16_PCREL
3211 ENUMX
3212   BFD_RELOC_SH_IMM_MEDLOW16
3213 ENUMX
3214   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3215 ENUMX
3216   BFD_RELOC_SH_IMM_MEDHI16
3217 ENUMX
3218   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3219 ENUMX
3220   BFD_RELOC_SH_IMM_HI16
3221 ENUMX
3222   BFD_RELOC_SH_IMM_HI16_PCREL
3223 ENUMX
3224   BFD_RELOC_SH_PT_16
3225 ENUMX
3226   BFD_RELOC_SH_TLS_GD_32
3227 ENUMX
3228   BFD_RELOC_SH_TLS_LD_32
3229 ENUMX
3230   BFD_RELOC_SH_TLS_LDO_32
3231 ENUMX
3232   BFD_RELOC_SH_TLS_IE_32
3233 ENUMX
3234   BFD_RELOC_SH_TLS_LE_32
3235 ENUMX
3236   BFD_RELOC_SH_TLS_DTPMOD32
3237 ENUMX
3238   BFD_RELOC_SH_TLS_DTPOFF32
3239 ENUMX
3240   BFD_RELOC_SH_TLS_TPOFF32
3241 ENUMDOC
3242   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3243
3244 ENUM
3245   BFD_RELOC_ARC_B22_PCREL
3246 ENUMDOC
3247   ARC Cores relocs.
3248   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3249   not stored in the instruction.  The high 20 bits are installed in bits 26
3250   through 7 of the instruction.
3251 ENUM
3252   BFD_RELOC_ARC_B26
3253 ENUMDOC
3254   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3255   stored in the instruction.  The high 24 bits are installed in bits 23
3256   through 0.
3257
3258 ENUM
3259   BFD_RELOC_BFIN_16_IMM
3260 ENUMDOC
3261   ADI Blackfin 16 bit immediate absolute reloc.
3262 ENUM
3263   BFD_RELOC_BFIN_16_HIGH
3264 ENUMDOC
3265   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3266 ENUM
3267   BFD_RELOC_BFIN_4_PCREL
3268 ENUMDOC
3269   ADI Blackfin 'a' part of LSETUP.
3270 ENUM
3271   BFD_RELOC_BFIN_5_PCREL
3272 ENUMDOC
3273   ADI Blackfin.
3274 ENUM
3275   BFD_RELOC_BFIN_16_LOW
3276 ENUMDOC
3277   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3278 ENUM
3279   BFD_RELOC_BFIN_10_PCREL
3280 ENUMDOC
3281   ADI Blackfin.
3282 ENUM
3283   BFD_RELOC_BFIN_11_PCREL
3284 ENUMDOC
3285   ADI Blackfin 'b' part of LSETUP.
3286 ENUM
3287   BFD_RELOC_BFIN_12_PCREL_JUMP
3288 ENUMDOC
3289   ADI Blackfin.
3290 ENUM
3291   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3292 ENUMDOC
3293   ADI Blackfin Short jump, pcrel.
3294 ENUM
3295   BFD_RELOC_BFIN_24_PCREL_CALL_X
3296 ENUMDOC
3297   ADI Blackfin Call.x not implemented.
3298 ENUM
3299   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3300 ENUMDOC
3301   ADI Blackfin Long Jump pcrel.
3302 ENUM
3303   BFD_RELOC_BFIN_GOT17M4
3304 ENUMX
3305   BFD_RELOC_BFIN_GOTHI
3306 ENUMX
3307   BFD_RELOC_BFIN_GOTLO
3308 ENUMX
3309   BFD_RELOC_BFIN_FUNCDESC
3310 ENUMX
3311   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3312 ENUMX
3313   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3314 ENUMX
3315   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3316 ENUMX
3317   BFD_RELOC_BFIN_FUNCDESC_VALUE
3318 ENUMX
3319   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3320 ENUMX
3321   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3322 ENUMX
3323   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3324 ENUMX
3325   BFD_RELOC_BFIN_GOTOFF17M4
3326 ENUMX
3327   BFD_RELOC_BFIN_GOTOFFHI
3328 ENUMX
3329   BFD_RELOC_BFIN_GOTOFFLO
3330 ENUMDOC
3331   ADI Blackfin FD-PIC relocations.
3332 ENUM
3333   BFD_RELOC_BFIN_GOT
3334 ENUMDOC
3335   ADI Blackfin GOT relocation.
3336 ENUM
3337   BFD_RELOC_BFIN_PLTPC
3338 ENUMDOC
3339   ADI Blackfin PLTPC relocation.
3340 ENUM
3341   BFD_ARELOC_BFIN_PUSH
3342 ENUMDOC
3343   ADI Blackfin arithmetic relocation.
3344 ENUM
3345   BFD_ARELOC_BFIN_CONST
3346 ENUMDOC
3347   ADI Blackfin arithmetic relocation.
3348 ENUM
3349   BFD_ARELOC_BFIN_ADD
3350 ENUMDOC
3351   ADI Blackfin arithmetic relocation.
3352 ENUM
3353   BFD_ARELOC_BFIN_SUB
3354 ENUMDOC
3355   ADI Blackfin arithmetic relocation.
3356 ENUM
3357   BFD_ARELOC_BFIN_MULT
3358 ENUMDOC
3359   ADI Blackfin arithmetic relocation.
3360 ENUM
3361   BFD_ARELOC_BFIN_DIV
3362 ENUMDOC
3363   ADI Blackfin arithmetic relocation.
3364 ENUM
3365   BFD_ARELOC_BFIN_MOD
3366 ENUMDOC
3367   ADI Blackfin arithmetic relocation.
3368 ENUM
3369   BFD_ARELOC_BFIN_LSHIFT
3370 ENUMDOC
3371   ADI Blackfin arithmetic relocation.
3372 ENUM
3373   BFD_ARELOC_BFIN_RSHIFT
3374 ENUMDOC
3375   ADI Blackfin arithmetic relocation.
3376 ENUM
3377   BFD_ARELOC_BFIN_AND
3378 ENUMDOC
3379   ADI Blackfin arithmetic relocation.
3380 ENUM
3381   BFD_ARELOC_BFIN_OR
3382 ENUMDOC
3383   ADI Blackfin arithmetic relocation.
3384 ENUM
3385   BFD_ARELOC_BFIN_XOR
3386 ENUMDOC
3387   ADI Blackfin arithmetic relocation.
3388 ENUM
3389   BFD_ARELOC_BFIN_LAND
3390 ENUMDOC
3391   ADI Blackfin arithmetic relocation.
3392 ENUM
3393   BFD_ARELOC_BFIN_LOR
3394 ENUMDOC
3395   ADI Blackfin arithmetic relocation.
3396 ENUM
3397   BFD_ARELOC_BFIN_LEN
3398 ENUMDOC
3399   ADI Blackfin arithmetic relocation.
3400 ENUM
3401   BFD_ARELOC_BFIN_NEG
3402 ENUMDOC
3403   ADI Blackfin arithmetic relocation.
3404 ENUM
3405   BFD_ARELOC_BFIN_COMP
3406 ENUMDOC
3407   ADI Blackfin arithmetic relocation.
3408 ENUM
3409   BFD_ARELOC_BFIN_PAGE
3410 ENUMDOC
3411   ADI Blackfin arithmetic relocation.
3412 ENUM
3413   BFD_ARELOC_BFIN_HWPAGE
3414 ENUMDOC
3415   ADI Blackfin arithmetic relocation.
3416 ENUM
3417   BFD_ARELOC_BFIN_ADDR
3418 ENUMDOC
3419   ADI Blackfin arithmetic relocation.
3420
3421 ENUM
3422   BFD_RELOC_D10V_10_PCREL_R
3423 ENUMDOC
3424   Mitsubishi D10V relocs.
3425   This is a 10-bit reloc with the right 2 bits
3426   assumed to be 0.
3427 ENUM
3428   BFD_RELOC_D10V_10_PCREL_L
3429 ENUMDOC
3430   Mitsubishi D10V relocs.
3431   This is a 10-bit reloc with the right 2 bits
3432   assumed to be 0.  This is the same as the previous reloc
3433   except it is in the left container, i.e.,
3434   shifted left 15 bits.
3435 ENUM
3436   BFD_RELOC_D10V_18
3437 ENUMDOC
3438   This is an 18-bit reloc with the right 2 bits
3439   assumed to be 0.
3440 ENUM
3441   BFD_RELOC_D10V_18_PCREL
3442 ENUMDOC
3443   This is an 18-bit reloc with the right 2 bits
3444   assumed to be 0.
3445
3446 ENUM
3447   BFD_RELOC_D30V_6
3448 ENUMDOC
3449   Mitsubishi D30V relocs.
3450   This is a 6-bit absolute reloc.
3451 ENUM
3452   BFD_RELOC_D30V_9_PCREL
3453 ENUMDOC
3454   This is a 6-bit pc-relative reloc with
3455   the right 3 bits assumed to be 0.
3456 ENUM
3457   BFD_RELOC_D30V_9_PCREL_R
3458 ENUMDOC
3459   This is a 6-bit pc-relative reloc with
3460   the right 3 bits assumed to be 0. Same
3461   as the previous reloc but on the right side
3462   of the container.
3463 ENUM
3464   BFD_RELOC_D30V_15
3465 ENUMDOC
3466   This is a 12-bit absolute reloc with the
3467   right 3 bitsassumed to be 0.
3468 ENUM
3469   BFD_RELOC_D30V_15_PCREL
3470 ENUMDOC
3471   This is a 12-bit pc-relative reloc with
3472   the right 3 bits assumed to be 0.
3473 ENUM
3474   BFD_RELOC_D30V_15_PCREL_R
3475 ENUMDOC
3476   This is a 12-bit pc-relative reloc with
3477   the right 3 bits assumed to be 0. Same
3478   as the previous reloc but on the right side
3479   of the container.
3480 ENUM
3481   BFD_RELOC_D30V_21
3482 ENUMDOC
3483   This is an 18-bit absolute reloc with
3484   the right 3 bits assumed to be 0.
3485 ENUM
3486   BFD_RELOC_D30V_21_PCREL
3487 ENUMDOC
3488   This is an 18-bit pc-relative reloc with
3489   the right 3 bits assumed to be 0.
3490 ENUM
3491   BFD_RELOC_D30V_21_PCREL_R
3492 ENUMDOC
3493   This is an 18-bit pc-relative reloc with
3494   the right 3 bits assumed to be 0. Same
3495   as the previous reloc but on the right side
3496   of the container.
3497 ENUM
3498   BFD_RELOC_D30V_32
3499 ENUMDOC
3500   This is a 32-bit absolute reloc.
3501 ENUM
3502   BFD_RELOC_D30V_32_PCREL
3503 ENUMDOC
3504   This is a 32-bit pc-relative reloc.
3505
3506 ENUM
3507   BFD_RELOC_DLX_HI16_S
3508 ENUMDOC
3509   DLX relocs
3510 ENUM
3511   BFD_RELOC_DLX_LO16
3512 ENUMDOC
3513   DLX relocs
3514 ENUM
3515   BFD_RELOC_DLX_JMP26
3516 ENUMDOC
3517   DLX relocs
3518
3519 ENUM
3520   BFD_RELOC_M32C_HI8
3521 ENUMX
3522   BFD_RELOC_M32C_RL_JUMP
3523 ENUMX
3524   BFD_RELOC_M32C_RL_1ADDR
3525 ENUMX
3526   BFD_RELOC_M32C_RL_2ADDR
3527 ENUMDOC
3528   Renesas M16C/M32C Relocations.
3529
3530 ENUM
3531   BFD_RELOC_M32R_24
3532 ENUMDOC
3533   Renesas M32R (formerly Mitsubishi M32R) relocs.
3534   This is a 24 bit absolute address.
3535 ENUM
3536   BFD_RELOC_M32R_10_PCREL
3537 ENUMDOC
3538   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3539 ENUM
3540   BFD_RELOC_M32R_18_PCREL
3541 ENUMDOC
3542   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3543 ENUM
3544   BFD_RELOC_M32R_26_PCREL
3545 ENUMDOC
3546   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3547 ENUM
3548   BFD_RELOC_M32R_HI16_ULO
3549 ENUMDOC
3550   This is a 16-bit reloc containing the high 16 bits of an address
3551   used when the lower 16 bits are treated as unsigned.
3552 ENUM
3553   BFD_RELOC_M32R_HI16_SLO
3554 ENUMDOC
3555   This is a 16-bit reloc containing the high 16 bits of an address
3556   used when the lower 16 bits are treated as signed.
3557 ENUM
3558   BFD_RELOC_M32R_LO16
3559 ENUMDOC
3560   This is a 16-bit reloc containing the lower 16 bits of an address.
3561 ENUM
3562   BFD_RELOC_M32R_SDA16
3563 ENUMDOC
3564   This is a 16-bit reloc containing the small data area offset for use in
3565   add3, load, and store instructions.
3566 ENUM
3567   BFD_RELOC_M32R_GOT24
3568 ENUMX
3569   BFD_RELOC_M32R_26_PLTREL
3570 ENUMX
3571   BFD_RELOC_M32R_COPY
3572 ENUMX
3573   BFD_RELOC_M32R_GLOB_DAT
3574 ENUMX
3575   BFD_RELOC_M32R_JMP_SLOT
3576 ENUMX
3577   BFD_RELOC_M32R_RELATIVE
3578 ENUMX
3579   BFD_RELOC_M32R_GOTOFF
3580 ENUMX
3581   BFD_RELOC_M32R_GOTOFF_HI_ULO
3582 ENUMX
3583   BFD_RELOC_M32R_GOTOFF_HI_SLO
3584 ENUMX
3585   BFD_RELOC_M32R_GOTOFF_LO
3586 ENUMX
3587   BFD_RELOC_M32R_GOTPC24
3588 ENUMX
3589   BFD_RELOC_M32R_GOT16_HI_ULO
3590 ENUMX
3591   BFD_RELOC_M32R_GOT16_HI_SLO
3592 ENUMX
3593   BFD_RELOC_M32R_GOT16_LO
3594 ENUMX
3595   BFD_RELOC_M32R_GOTPC_HI_ULO
3596 ENUMX
3597   BFD_RELOC_M32R_GOTPC_HI_SLO
3598 ENUMX
3599   BFD_RELOC_M32R_GOTPC_LO
3600 ENUMDOC
3601   For PIC.
3602
3603
3604 ENUM
3605   BFD_RELOC_V850_9_PCREL
3606 ENUMDOC
3607   This is a 9-bit reloc
3608 ENUM
3609   BFD_RELOC_V850_22_PCREL
3610 ENUMDOC
3611   This is a 22-bit reloc
3612
3613 ENUM
3614   BFD_RELOC_V850_SDA_16_16_OFFSET
3615 ENUMDOC
3616   This is a 16 bit offset from the short data area pointer.
3617 ENUM
3618   BFD_RELOC_V850_SDA_15_16_OFFSET
3619 ENUMDOC
3620   This is a 16 bit offset (of which only 15 bits are used) from the
3621   short data area pointer.
3622 ENUM
3623   BFD_RELOC_V850_ZDA_16_16_OFFSET
3624 ENUMDOC
3625   This is a 16 bit offset from the zero data area pointer.
3626 ENUM
3627   BFD_RELOC_V850_ZDA_15_16_OFFSET
3628 ENUMDOC
3629   This is a 16 bit offset (of which only 15 bits are used) from the
3630   zero data area pointer.
3631 ENUM
3632   BFD_RELOC_V850_TDA_6_8_OFFSET
3633 ENUMDOC
3634   This is an 8 bit offset (of which only 6 bits are used) from the
3635   tiny data area pointer.
3636 ENUM
3637   BFD_RELOC_V850_TDA_7_8_OFFSET
3638 ENUMDOC
3639   This is an 8bit offset (of which only 7 bits are used) from the tiny
3640   data area pointer.
3641 ENUM
3642   BFD_RELOC_V850_TDA_7_7_OFFSET
3643 ENUMDOC
3644   This is a 7 bit offset from the tiny data area pointer.
3645 ENUM
3646   BFD_RELOC_V850_TDA_16_16_OFFSET
3647 ENUMDOC
3648   This is a 16 bit offset from the tiny data area pointer.
3649 COMMENT
3650 ENUM
3651   BFD_RELOC_V850_TDA_4_5_OFFSET
3652 ENUMDOC
3653   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3654   data area pointer.
3655 ENUM
3656   BFD_RELOC_V850_TDA_4_4_OFFSET
3657 ENUMDOC
3658   This is a 4 bit offset from the tiny data area pointer.
3659 ENUM
3660   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3661 ENUMDOC
3662   This is a 16 bit offset from the short data area pointer, with the
3663   bits placed non-contiguously in the instruction.
3664 ENUM
3665   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3666 ENUMDOC
3667   This is a 16 bit offset from the zero data area pointer, with the
3668   bits placed non-contiguously in the instruction.
3669 ENUM
3670   BFD_RELOC_V850_CALLT_6_7_OFFSET
3671 ENUMDOC
3672   This is a 6 bit offset from the call table base pointer.
3673 ENUM
3674   BFD_RELOC_V850_CALLT_16_16_OFFSET
3675 ENUMDOC
3676   This is a 16 bit offset from the call table base pointer.
3677 ENUM
3678   BFD_RELOC_V850_LONGCALL
3679 ENUMDOC
3680   Used for relaxing indirect function calls.
3681 ENUM
3682   BFD_RELOC_V850_LONGJUMP
3683 ENUMDOC
3684   Used for relaxing indirect jumps.
3685 ENUM
3686   BFD_RELOC_V850_ALIGN
3687 ENUMDOC
3688   Used to maintain alignment whilst relaxing.
3689 ENUM
3690   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3691 ENUMDOC
3692   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3693   instructions.
3694 ENUM
3695   BFD_RELOC_MN10300_32_PCREL
3696 ENUMDOC
3697   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3698   instruction.
3699 ENUM
3700   BFD_RELOC_MN10300_16_PCREL
3701 ENUMDOC
3702   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3703   instruction.
3704
3705 ENUM
3706   BFD_RELOC_TIC30_LDP
3707 ENUMDOC
3708   This is a 8bit DP reloc for the tms320c30, where the most
3709   significant 8 bits of a 24 bit word are placed into the least
3710   significant 8 bits of the opcode.
3711
3712 ENUM
3713   BFD_RELOC_TIC54X_PARTLS7
3714 ENUMDOC
3715   This is a 7bit reloc for the tms320c54x, where the least
3716   significant 7 bits of a 16 bit word are placed into the least
3717   significant 7 bits of the opcode.
3718
3719 ENUM
3720   BFD_RELOC_TIC54X_PARTMS9
3721 ENUMDOC
3722   This is a 9bit DP reloc for the tms320c54x, where the most
3723   significant 9 bits of a 16 bit word are placed into the least
3724   significant 9 bits of the opcode.
3725
3726 ENUM
3727   BFD_RELOC_TIC54X_23
3728 ENUMDOC
3729   This is an extended address 23-bit reloc for the tms320c54x.
3730
3731 ENUM
3732   BFD_RELOC_TIC54X_16_OF_23
3733 ENUMDOC
3734   This is a 16-bit reloc for the tms320c54x, where the least
3735   significant 16 bits of a 23-bit extended address are placed into
3736   the opcode.
3737
3738 ENUM
3739   BFD_RELOC_TIC54X_MS7_OF_23
3740 ENUMDOC
3741   This is a reloc for the tms320c54x, where the most
3742   significant 7 bits of a 23-bit extended address are placed into
3743   the opcode.
3744
3745 ENUM
3746   BFD_RELOC_FR30_48
3747 ENUMDOC
3748   This is a 48 bit reloc for the FR30 that stores 32 bits.
3749 ENUM
3750   BFD_RELOC_FR30_20
3751 ENUMDOC
3752   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3753   two sections.
3754 ENUM
3755   BFD_RELOC_FR30_6_IN_4
3756 ENUMDOC
3757   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3758   4 bits.
3759 ENUM
3760   BFD_RELOC_FR30_8_IN_8
3761 ENUMDOC
3762   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3763   into 8 bits.
3764 ENUM
3765   BFD_RELOC_FR30_9_IN_8
3766 ENUMDOC
3767   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3768   into 8 bits.
3769 ENUM
3770   BFD_RELOC_FR30_10_IN_8
3771 ENUMDOC
3772   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3773   into 8 bits.
3774 ENUM
3775   BFD_RELOC_FR30_9_PCREL
3776 ENUMDOC
3777   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3778   short offset into 8 bits.
3779 ENUM
3780   BFD_RELOC_FR30_12_PCREL
3781 ENUMDOC
3782   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3783   short offset into 11 bits.
3784
3785 ENUM
3786   BFD_RELOC_MCORE_PCREL_IMM8BY4
3787 ENUMX
3788   BFD_RELOC_MCORE_PCREL_IMM11BY2
3789 ENUMX
3790   BFD_RELOC_MCORE_PCREL_IMM4BY2
3791 ENUMX
3792   BFD_RELOC_MCORE_PCREL_32
3793 ENUMX
3794   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3795 ENUMX
3796   BFD_RELOC_MCORE_RVA
3797 ENUMDOC
3798   Motorola Mcore relocations.
3799
3800 ENUM
3801   BFD_RELOC_MEP_8
3802 ENUMX
3803   BFD_RELOC_MEP_16
3804 ENUMX
3805   BFD_RELOC_MEP_32
3806 ENUMX
3807   BFD_RELOC_MEP_PCREL8A2
3808 ENUMX
3809   BFD_RELOC_MEP_PCREL12A2
3810 ENUMX
3811   BFD_RELOC_MEP_PCREL17A2
3812 ENUMX
3813   BFD_RELOC_MEP_PCREL24A2
3814 ENUMX
3815   BFD_RELOC_MEP_PCABS24A2
3816 ENUMX
3817   BFD_RELOC_MEP_LOW16
3818 ENUMX
3819   BFD_RELOC_MEP_HI16U
3820 ENUMX
3821   BFD_RELOC_MEP_HI16S
3822 ENUMX
3823   BFD_RELOC_MEP_GPREL
3824 ENUMX
3825   BFD_RELOC_MEP_TPREL
3826 ENUMX
3827   BFD_RELOC_MEP_TPREL7
3828 ENUMX
3829   BFD_RELOC_MEP_TPREL7A2
3830 ENUMX
3831   BFD_RELOC_MEP_TPREL7A4
3832 ENUMX
3833   BFD_RELOC_MEP_UIMM24
3834 ENUMX
3835   BFD_RELOC_MEP_ADDR24A4
3836 ENUMX
3837   BFD_RELOC_MEP_GNU_VTINHERIT
3838 ENUMX
3839   BFD_RELOC_MEP_GNU_VTENTRY
3840 ENUMDOC
3841   Toshiba Media Processor Relocations.
3842 COMMENT
3843
3844 ENUM
3845   BFD_RELOC_MMIX_GETA
3846 ENUMX
3847   BFD_RELOC_MMIX_GETA_1
3848 ENUMX
3849   BFD_RELOC_MMIX_GETA_2
3850 ENUMX
3851   BFD_RELOC_MMIX_GETA_3
3852 ENUMDOC
3853   These are relocations for the GETA instruction.
3854 ENUM
3855   BFD_RELOC_MMIX_CBRANCH
3856 ENUMX
3857   BFD_RELOC_MMIX_CBRANCH_J
3858 ENUMX
3859   BFD_RELOC_MMIX_CBRANCH_1
3860 ENUMX
3861   BFD_RELOC_MMIX_CBRANCH_2
3862 ENUMX
3863   BFD_RELOC_MMIX_CBRANCH_3
3864 ENUMDOC
3865   These are relocations for a conditional branch instruction.
3866 ENUM
3867   BFD_RELOC_MMIX_PUSHJ
3868 ENUMX
3869   BFD_RELOC_MMIX_PUSHJ_1
3870 ENUMX
3871   BFD_RELOC_MMIX_PUSHJ_2
3872 ENUMX
3873   BFD_RELOC_MMIX_PUSHJ_3
3874 ENUMX
3875   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
3876 ENUMDOC
3877   These are relocations for the PUSHJ instruction.
3878 ENUM
3879   BFD_RELOC_MMIX_JMP
3880 ENUMX
3881   BFD_RELOC_MMIX_JMP_1
3882 ENUMX
3883   BFD_RELOC_MMIX_JMP_2
3884 ENUMX
3885   BFD_RELOC_MMIX_JMP_3
3886 ENUMDOC
3887   These are relocations for the JMP instruction.
3888 ENUM
3889   BFD_RELOC_MMIX_ADDR19
3890 ENUMDOC
3891   This is a relocation for a relative address as in a GETA instruction or
3892   a branch.
3893 ENUM
3894   BFD_RELOC_MMIX_ADDR27
3895 ENUMDOC
3896   This is a relocation for a relative address as in a JMP instruction.
3897 ENUM
3898   BFD_RELOC_MMIX_REG_OR_BYTE
3899 ENUMDOC
3900   This is a relocation for an instruction field that may be a general
3901   register or a value 0..255.
3902 ENUM
3903   BFD_RELOC_MMIX_REG
3904 ENUMDOC
3905   This is a relocation for an instruction field that may be a general
3906   register.
3907 ENUM
3908   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
3909 ENUMDOC
3910   This is a relocation for two instruction fields holding a register and
3911   an offset, the equivalent of the relocation.
3912 ENUM
3913   BFD_RELOC_MMIX_LOCAL
3914 ENUMDOC
3915   This relocation is an assertion that the expression is not allocated as
3916   a global register.  It does not modify contents.
3917
3918 ENUM
3919   BFD_RELOC_AVR_7_PCREL
3920 ENUMDOC
3921   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
3922   short offset into 7 bits.
3923 ENUM
3924   BFD_RELOC_AVR_13_PCREL
3925 ENUMDOC
3926   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
3927   short offset into 12 bits.
3928 ENUM
3929   BFD_RELOC_AVR_16_PM
3930 ENUMDOC
3931   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
3932   program memory address) into 16 bits.
3933 ENUM
3934   BFD_RELOC_AVR_LO8_LDI
3935 ENUMDOC
3936   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3937   data memory address) into 8 bit immediate value of LDI insn.
3938 ENUM
3939   BFD_RELOC_AVR_HI8_LDI
3940 ENUMDOC
3941   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3942   of data memory address) into 8 bit immediate value of LDI insn.
3943 ENUM
3944   BFD_RELOC_AVR_HH8_LDI
3945 ENUMDOC
3946   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3947   of program memory address) into 8 bit immediate value of LDI insn.
3948 ENUM
3949   BFD_RELOC_AVR_MS8_LDI
3950 ENUMDOC
3951   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3952   of 32 bit value) into 8 bit immediate value of LDI insn.
3953 ENUM
3954   BFD_RELOC_AVR_LO8_LDI_NEG
3955 ENUMDOC
3956   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3957   (usually data memory address) into 8 bit immediate value of SUBI insn.
3958 ENUM
3959   BFD_RELOC_AVR_HI8_LDI_NEG
3960 ENUMDOC
3961   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3962   (high 8 bit of data memory address) into 8 bit immediate value of
3963   SUBI insn.
3964 ENUM
3965   BFD_RELOC_AVR_HH8_LDI_NEG
3966 ENUMDOC
3967   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3968   (most high 8 bit of program memory address) into 8 bit immediate value
3969   of LDI or SUBI insn.
3970 ENUM
3971   BFD_RELOC_AVR_MS8_LDI_NEG
3972 ENUMDOC
3973   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
3974   of 32 bit value) into 8 bit immediate value of LDI insn.
3975 ENUM
3976   BFD_RELOC_AVR_LO8_LDI_PM
3977 ENUMDOC
3978   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3979   command address) into 8 bit immediate value of LDI insn.
3980 ENUM
3981   BFD_RELOC_AVR_LO8_LDI_GS
3982 ENUMDOC
3983   This is a 16 bit reloc for the AVR that stores 8 bit value
3984   (command address) into 8 bit immediate value of LDI insn. If the address
3985   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
3986   in the lower 128k.
3987 ENUM
3988   BFD_RELOC_AVR_HI8_LDI_PM
3989 ENUMDOC
3990   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3991   of command address) into 8 bit immediate value of LDI insn.
3992 ENUM
3993   BFD_RELOC_AVR_HI8_LDI_GS
3994 ENUMDOC
3995   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3996   of command address) into 8 bit immediate value of LDI insn.  If the address
3997   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
3998   below 128k.
3999 ENUM
4000   BFD_RELOC_AVR_HH8_LDI_PM
4001 ENUMDOC
4002   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4003   of command address) into 8 bit immediate value of LDI insn.
4004 ENUM
4005   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4006 ENUMDOC
4007   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4008   (usually command address) into 8 bit immediate value of SUBI insn.
4009 ENUM
4010   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4011 ENUMDOC
4012   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4013   (high 8 bit of 16 bit command address) into 8 bit immediate value
4014   of SUBI insn.
4015 ENUM
4016   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4017 ENUMDOC
4018   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4019   (high 6 bit of 22 bit command address) into 8 bit immediate
4020   value of SUBI insn.
4021 ENUM
4022   BFD_RELOC_AVR_CALL
4023 ENUMDOC
4024   This is a 32 bit reloc for the AVR that stores 23 bit value
4025   into 22 bits.
4026 ENUM
4027   BFD_RELOC_AVR_LDI
4028 ENUMDOC
4029   This is a 16 bit reloc for the AVR that stores all needed bits
4030   for absolute addressing with ldi with overflow check to linktime
4031 ENUM
4032   BFD_RELOC_AVR_6
4033 ENUMDOC
4034   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4035   instructions
4036 ENUM
4037   BFD_RELOC_AVR_6_ADIW
4038 ENUMDOC
4039   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4040   instructions
4041
4042 ENUM
4043   BFD_RELOC_390_12
4044 ENUMDOC
4045    Direct 12 bit.
4046 ENUM
4047   BFD_RELOC_390_GOT12
4048 ENUMDOC
4049   12 bit GOT offset.
4050 ENUM
4051   BFD_RELOC_390_PLT32
4052 ENUMDOC
4053   32 bit PC relative PLT address.
4054 ENUM
4055   BFD_RELOC_390_COPY
4056 ENUMDOC
4057   Copy symbol at runtime.
4058 ENUM
4059   BFD_RELOC_390_GLOB_DAT
4060 ENUMDOC
4061   Create GOT entry.
4062 ENUM
4063   BFD_RELOC_390_JMP_SLOT
4064 ENUMDOC
4065   Create PLT entry.
4066 ENUM
4067   BFD_RELOC_390_RELATIVE
4068 ENUMDOC
4069   Adjust by program base.
4070 ENUM
4071   BFD_RELOC_390_GOTPC
4072 ENUMDOC
4073   32 bit PC relative offset to GOT.
4074 ENUM
4075   BFD_RELOC_390_GOT16
4076 ENUMDOC
4077   16 bit GOT offset.
4078 ENUM
4079   BFD_RELOC_390_PC16DBL
4080 ENUMDOC
4081   PC relative 16 bit shifted by 1.
4082 ENUM
4083   BFD_RELOC_390_PLT16DBL
4084 ENUMDOC
4085   16 bit PC rel. PLT shifted by 1.
4086 ENUM
4087   BFD_RELOC_390_PC32DBL
4088 ENUMDOC
4089   PC relative 32 bit shifted by 1.
4090 ENUM
4091   BFD_RELOC_390_PLT32DBL
4092 ENUMDOC
4093   32 bit PC rel. PLT shifted by 1.
4094 ENUM
4095   BFD_RELOC_390_GOTPCDBL
4096 ENUMDOC
4097   32 bit PC rel. GOT shifted by 1.
4098 ENUM
4099   BFD_RELOC_390_GOT64
4100 ENUMDOC
4101   64 bit GOT offset.
4102 ENUM
4103   BFD_RELOC_390_PLT64
4104 ENUMDOC
4105   64 bit PC relative PLT address.
4106 ENUM
4107   BFD_RELOC_390_GOTENT
4108 ENUMDOC
4109   32 bit rel. offset to GOT entry.
4110 ENUM
4111   BFD_RELOC_390_GOTOFF64
4112 ENUMDOC
4113   64 bit offset to GOT.
4114 ENUM
4115   BFD_RELOC_390_GOTPLT12
4116 ENUMDOC
4117   12-bit offset to symbol-entry within GOT, with PLT handling.
4118 ENUM
4119   BFD_RELOC_390_GOTPLT16
4120 ENUMDOC
4121   16-bit offset to symbol-entry within GOT, with PLT handling.
4122 ENUM
4123   BFD_RELOC_390_GOTPLT32
4124 ENUMDOC
4125   32-bit offset to symbol-entry within GOT, with PLT handling.
4126 ENUM
4127   BFD_RELOC_390_GOTPLT64
4128 ENUMDOC
4129   64-bit offset to symbol-entry within GOT, with PLT handling.
4130 ENUM
4131   BFD_RELOC_390_GOTPLTENT
4132 ENUMDOC
4133   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4134 ENUM
4135   BFD_RELOC_390_PLTOFF16
4136 ENUMDOC
4137   16-bit rel. offset from the GOT to a PLT entry.
4138 ENUM
4139   BFD_RELOC_390_PLTOFF32
4140 ENUMDOC
4141   32-bit rel. offset from the GOT to a PLT entry.
4142 ENUM
4143   BFD_RELOC_390_PLTOFF64
4144 ENUMDOC
4145   64-bit rel. offset from the GOT to a PLT entry.
4146
4147 ENUM
4148   BFD_RELOC_390_TLS_LOAD
4149 ENUMX
4150   BFD_RELOC_390_TLS_GDCALL
4151 ENUMX
4152   BFD_RELOC_390_TLS_LDCALL
4153 ENUMX
4154   BFD_RELOC_390_TLS_GD32
4155 ENUMX
4156   BFD_RELOC_390_TLS_GD64
4157 ENUMX
4158   BFD_RELOC_390_TLS_GOTIE12
4159 ENUMX
4160   BFD_RELOC_390_TLS_GOTIE32
4161 ENUMX
4162   BFD_RELOC_390_TLS_GOTIE64
4163 ENUMX
4164   BFD_RELOC_390_TLS_LDM32
4165 ENUMX
4166   BFD_RELOC_390_TLS_LDM64
4167 ENUMX
4168   BFD_RELOC_390_TLS_IE32
4169 ENUMX
4170   BFD_RELOC_390_TLS_IE64
4171 ENUMX
4172   BFD_RELOC_390_TLS_IEENT
4173 ENUMX
4174   BFD_RELOC_390_TLS_LE32
4175 ENUMX
4176   BFD_RELOC_390_TLS_LE64
4177 ENUMX
4178   BFD_RELOC_390_TLS_LDO32
4179 ENUMX
4180   BFD_RELOC_390_TLS_LDO64
4181 ENUMX
4182   BFD_RELOC_390_TLS_DTPMOD
4183 ENUMX
4184   BFD_RELOC_390_TLS_DTPOFF
4185 ENUMX
4186   BFD_RELOC_390_TLS_TPOFF
4187 ENUMDOC
4188   s390 tls relocations.
4189
4190 ENUM
4191   BFD_RELOC_390_20
4192 ENUMX
4193   BFD_RELOC_390_GOT20
4194 ENUMX
4195   BFD_RELOC_390_GOTPLT20
4196 ENUMX
4197   BFD_RELOC_390_TLS_GOTIE20
4198 ENUMDOC
4199   Long displacement extension.
4200
4201 ENUM
4202   BFD_RELOC_SCORE_GPREL15
4203 ENUMDOC
4204   Score relocations
4205   Low 16 bit for load/store
4206 ENUM
4207   BFD_RELOC_SCORE_DUMMY2
4208 ENUMX
4209   BFD_RELOC_SCORE_JMP
4210 ENUMDOC
4211   This is a 24-bit reloc with the right 1 bit assumed to be 0
4212 ENUM
4213   BFD_RELOC_SCORE_BRANCH
4214 ENUMDOC
4215   This is a 19-bit reloc with the right 1 bit assumed to be 0
4216 ENUM
4217   BFD_RELOC_SCORE_IMM30
4218 ENUMDOC
4219   This is a 32-bit reloc for 48-bit instructions.
4220 ENUM
4221   BFD_RELOC_SCORE_IMM32
4222 ENUMDOC
4223   This is a 32-bit reloc for 48-bit instructions.
4224 ENUM
4225   BFD_RELOC_SCORE16_JMP
4226 ENUMDOC
4227   This is a 11-bit reloc with the right 1 bit assumed to be 0
4228 ENUM
4229   BFD_RELOC_SCORE16_BRANCH
4230 ENUMDOC
4231   This is a 8-bit reloc with the right 1 bit assumed to be 0
4232 ENUM
4233   BFD_RELOC_SCORE_BCMP
4234 ENUMDOC
4235    This is a 9-bit reloc with the right 1 bit assumed to be 0
4236 ENUM
4237   BFD_RELOC_SCORE_GOT15
4238 ENUMX
4239   BFD_RELOC_SCORE_GOT_LO16
4240 ENUMX
4241   BFD_RELOC_SCORE_CALL15
4242 ENUMX
4243   BFD_RELOC_SCORE_DUMMY_HI16
4244 ENUMDOC
4245   Undocumented Score relocs
4246
4247 ENUM
4248   BFD_RELOC_IP2K_FR9
4249 ENUMDOC
4250   Scenix IP2K - 9-bit register number / data address
4251 ENUM
4252   BFD_RELOC_IP2K_BANK
4253 ENUMDOC
4254   Scenix IP2K - 4-bit register/data bank number
4255 ENUM
4256   BFD_RELOC_IP2K_ADDR16CJP
4257 ENUMDOC
4258   Scenix IP2K - low 13 bits of instruction word address
4259 ENUM
4260   BFD_RELOC_IP2K_PAGE3
4261 ENUMDOC
4262   Scenix IP2K - high 3 bits of instruction word address
4263 ENUM
4264   BFD_RELOC_IP2K_LO8DATA
4265 ENUMX
4266   BFD_RELOC_IP2K_HI8DATA
4267 ENUMX
4268   BFD_RELOC_IP2K_EX8DATA
4269 ENUMDOC
4270   Scenix IP2K - ext/low/high 8 bits of data address
4271 ENUM
4272   BFD_RELOC_IP2K_LO8INSN
4273 ENUMX
4274   BFD_RELOC_IP2K_HI8INSN
4275 ENUMDOC
4276   Scenix IP2K - low/high 8 bits of instruction word address
4277 ENUM
4278   BFD_RELOC_IP2K_PC_SKIP
4279 ENUMDOC
4280   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4281 ENUM
4282   BFD_RELOC_IP2K_TEXT
4283 ENUMDOC
4284   Scenix IP2K - 16 bit word address in text section.
4285 ENUM
4286   BFD_RELOC_IP2K_FR_OFFSET
4287 ENUMDOC
4288   Scenix IP2K - 7-bit sp or dp offset
4289 ENUM
4290   BFD_RELOC_VPE4KMATH_DATA
4291 ENUMX
4292   BFD_RELOC_VPE4KMATH_INSN
4293 ENUMDOC
4294   Scenix VPE4K coprocessor - data/insn-space addressing
4295
4296 ENUM
4297   BFD_RELOC_VTABLE_INHERIT
4298 ENUMX
4299   BFD_RELOC_VTABLE_ENTRY
4300 ENUMDOC
4301   These two relocations are used by the linker to determine which of
4302   the entries in a C++ virtual function table are actually used.  When
4303   the --gc-sections option is given, the linker will zero out the entries
4304   that are not used, so that the code for those functions need not be
4305   included in the output.
4306
4307   VTABLE_INHERIT is a zero-space relocation used to describe to the
4308   linker the inheritance tree of a C++ virtual function table.  The
4309   relocation's symbol should be the parent class' vtable, and the
4310   relocation should be located at the child vtable.
4311
4312   VTABLE_ENTRY is a zero-space relocation that describes the use of a
4313   virtual function table entry.  The reloc's symbol should refer to the
4314   table of the class mentioned in the code.  Off of that base, an offset
4315   describes the entry that is being used.  For Rela hosts, this offset
4316   is stored in the reloc's addend.  For Rel hosts, we are forced to put
4317   this offset in the reloc's section offset.
4318
4319 ENUM
4320   BFD_RELOC_IA64_IMM14
4321 ENUMX
4322   BFD_RELOC_IA64_IMM22
4323 ENUMX
4324   BFD_RELOC_IA64_IMM64
4325 ENUMX
4326   BFD_RELOC_IA64_DIR32MSB
4327 ENUMX
4328   BFD_RELOC_IA64_DIR32LSB
4329 ENUMX
4330   BFD_RELOC_IA64_DIR64MSB
4331 ENUMX
4332   BFD_RELOC_IA64_DIR64LSB
4333 ENUMX
4334   BFD_RELOC_IA64_GPREL22
4335 ENUMX
4336   BFD_RELOC_IA64_GPREL64I
4337 ENUMX
4338   BFD_RELOC_IA64_GPREL32MSB
4339 ENUMX
4340   BFD_RELOC_IA64_GPREL32LSB
4341 ENUMX
4342   BFD_RELOC_IA64_GPREL64MSB
4343 ENUMX
4344   BFD_RELOC_IA64_GPREL64LSB
4345 ENUMX
4346   BFD_RELOC_IA64_LTOFF22
4347 ENUMX
4348   BFD_RELOC_IA64_LTOFF64I
4349 ENUMX
4350   BFD_RELOC_IA64_PLTOFF22
4351 ENUMX
4352   BFD_RELOC_IA64_PLTOFF64I
4353 ENUMX
4354   BFD_RELOC_IA64_PLTOFF64MSB
4355 ENUMX
4356   BFD_RELOC_IA64_PLTOFF64LSB
4357 ENUMX
4358   BFD_RELOC_IA64_FPTR64I
4359 ENUMX
4360   BFD_RELOC_IA64_FPTR32MSB
4361 ENUMX
4362   BFD_RELOC_IA64_FPTR32LSB
4363 ENUMX
4364   BFD_RELOC_IA64_FPTR64MSB
4365 ENUMX
4366   BFD_RELOC_IA64_FPTR64LSB
4367 ENUMX
4368   BFD_RELOC_IA64_PCREL21B
4369 ENUMX
4370   BFD_RELOC_IA64_PCREL21BI
4371 ENUMX
4372   BFD_RELOC_IA64_PCREL21M
4373 ENUMX
4374   BFD_RELOC_IA64_PCREL21F
4375 ENUMX
4376   BFD_RELOC_IA64_PCREL22
4377 ENUMX
4378   BFD_RELOC_IA64_PCREL60B
4379 ENUMX
4380   BFD_RELOC_IA64_PCREL64I
4381 ENUMX
4382   BFD_RELOC_IA64_PCREL32MSB
4383 ENUMX
4384   BFD_RELOC_IA64_PCREL32LSB
4385 ENUMX
4386   BFD_RELOC_IA64_PCREL64MSB
4387 ENUMX
4388   BFD_RELOC_IA64_PCREL64LSB
4389 ENUMX
4390   BFD_RELOC_IA64_LTOFF_FPTR22
4391 ENUMX
4392   BFD_RELOC_IA64_LTOFF_FPTR64I
4393 ENUMX
4394   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4395 ENUMX
4396   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4397 ENUMX
4398   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4399 ENUMX
4400   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4401 ENUMX
4402   BFD_RELOC_IA64_SEGREL32MSB
4403 ENUMX
4404   BFD_RELOC_IA64_SEGREL32LSB
4405 ENUMX
4406   BFD_RELOC_IA64_SEGREL64MSB
4407 ENUMX
4408   BFD_RELOC_IA64_SEGREL64LSB
4409 ENUMX
4410   BFD_RELOC_IA64_SECREL32MSB
4411 ENUMX
4412   BFD_RELOC_IA64_SECREL32LSB
4413 ENUMX
4414   BFD_RELOC_IA64_SECREL64MSB
4415 ENUMX
4416   BFD_RELOC_IA64_SECREL64LSB
4417 ENUMX
4418   BFD_RELOC_IA64_REL32MSB
4419 ENUMX
4420   BFD_RELOC_IA64_REL32LSB
4421 ENUMX
4422   BFD_RELOC_IA64_REL64MSB
4423 ENUMX
4424   BFD_RELOC_IA64_REL64LSB
4425 ENUMX
4426   BFD_RELOC_IA64_LTV32MSB
4427 ENUMX
4428   BFD_RELOC_IA64_LTV32LSB
4429 ENUMX
4430   BFD_RELOC_IA64_LTV64MSB
4431 ENUMX
4432   BFD_RELOC_IA64_LTV64LSB
4433 ENUMX
4434   BFD_RELOC_IA64_IPLTMSB
4435 ENUMX
4436   BFD_RELOC_IA64_IPLTLSB
4437 ENUMX
4438   BFD_RELOC_IA64_COPY
4439 ENUMX
4440   BFD_RELOC_IA64_LTOFF22X
4441 ENUMX
4442   BFD_RELOC_IA64_LDXMOV
4443 ENUMX
4444   BFD_RELOC_IA64_TPREL14
4445 ENUMX
4446   BFD_RELOC_IA64_TPREL22
4447 ENUMX
4448   BFD_RELOC_IA64_TPREL64I
4449 ENUMX
4450   BFD_RELOC_IA64_TPREL64MSB
4451 ENUMX
4452   BFD_RELOC_IA64_TPREL64LSB
4453 ENUMX
4454   BFD_RELOC_IA64_LTOFF_TPREL22
4455 ENUMX
4456   BFD_RELOC_IA64_DTPMOD64MSB
4457 ENUMX
4458   BFD_RELOC_IA64_DTPMOD64LSB
4459 ENUMX
4460   BFD_RELOC_IA64_LTOFF_DTPMOD22
4461 ENUMX
4462   BFD_RELOC_IA64_DTPREL14
4463 ENUMX
4464   BFD_RELOC_IA64_DTPREL22
4465 ENUMX
4466   BFD_RELOC_IA64_DTPREL64I
4467 ENUMX
4468   BFD_RELOC_IA64_DTPREL32MSB
4469 ENUMX
4470   BFD_RELOC_IA64_DTPREL32LSB
4471 ENUMX
4472   BFD_RELOC_IA64_DTPREL64MSB
4473 ENUMX
4474   BFD_RELOC_IA64_DTPREL64LSB
4475 ENUMX
4476   BFD_RELOC_IA64_LTOFF_DTPREL22
4477 ENUMDOC
4478   Intel IA64 Relocations.
4479
4480 ENUM
4481   BFD_RELOC_M68HC11_HI8
4482 ENUMDOC
4483   Motorola 68HC11 reloc.
4484   This is the 8 bit high part of an absolute address.
4485 ENUM
4486   BFD_RELOC_M68HC11_LO8
4487 ENUMDOC
4488   Motorola 68HC11 reloc.
4489   This is the 8 bit low part of an absolute address.
4490 ENUM
4491   BFD_RELOC_M68HC11_3B
4492 ENUMDOC
4493   Motorola 68HC11 reloc.
4494   This is the 3 bit of a value.
4495 ENUM
4496   BFD_RELOC_M68HC11_RL_JUMP
4497 ENUMDOC
4498   Motorola 68HC11 reloc.
4499   This reloc marks the beginning of a jump/call instruction.
4500   It is used for linker relaxation to correctly identify beginning
4501   of instruction and change some branches to use PC-relative
4502   addressing mode.
4503 ENUM
4504   BFD_RELOC_M68HC11_RL_GROUP
4505 ENUMDOC
4506   Motorola 68HC11 reloc.
4507   This reloc marks a group of several instructions that gcc generates
4508   and for which the linker relaxation pass can modify and/or remove
4509   some of them.
4510 ENUM
4511   BFD_RELOC_M68HC11_LO16
4512 ENUMDOC
4513   Motorola 68HC11 reloc.
4514   This is the 16-bit lower part of an address.  It is used for 'call'
4515   instruction to specify the symbol address without any special
4516   transformation (due to memory bank window).
4517 ENUM
4518   BFD_RELOC_M68HC11_PAGE
4519 ENUMDOC
4520   Motorola 68HC11 reloc.
4521   This is a 8-bit reloc that specifies the page number of an address.
4522   It is used by 'call' instruction to specify the page number of
4523   the symbol.
4524 ENUM
4525   BFD_RELOC_M68HC11_24
4526 ENUMDOC
4527   Motorola 68HC11 reloc.
4528   This is a 24-bit reloc that represents the address with a 16-bit
4529   value and a 8-bit page number.  The symbol address is transformed
4530   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4531 ENUM
4532   BFD_RELOC_M68HC12_5B
4533 ENUMDOC
4534   Motorola 68HC12 reloc.
4535   This is the 5 bits of a value.
4536
4537 ENUM
4538   BFD_RELOC_16C_NUM08
4539 ENUMX
4540   BFD_RELOC_16C_NUM08_C
4541 ENUMX
4542   BFD_RELOC_16C_NUM16
4543 ENUMX
4544   BFD_RELOC_16C_NUM16_C
4545 ENUMX
4546   BFD_RELOC_16C_NUM32
4547 ENUMX
4548   BFD_RELOC_16C_NUM32_C
4549 ENUMX
4550   BFD_RELOC_16C_DISP04
4551 ENUMX
4552   BFD_RELOC_16C_DISP04_C
4553 ENUMX
4554   BFD_RELOC_16C_DISP08
4555 ENUMX
4556   BFD_RELOC_16C_DISP08_C
4557 ENUMX
4558   BFD_RELOC_16C_DISP16
4559 ENUMX
4560   BFD_RELOC_16C_DISP16_C
4561 ENUMX
4562   BFD_RELOC_16C_DISP24
4563 ENUMX
4564   BFD_RELOC_16C_DISP24_C
4565 ENUMX
4566   BFD_RELOC_16C_DISP24a
4567 ENUMX
4568   BFD_RELOC_16C_DISP24a_C
4569 ENUMX
4570   BFD_RELOC_16C_REG04
4571 ENUMX
4572   BFD_RELOC_16C_REG04_C
4573 ENUMX
4574   BFD_RELOC_16C_REG04a
4575 ENUMX
4576   BFD_RELOC_16C_REG04a_C
4577 ENUMX
4578   BFD_RELOC_16C_REG14
4579 ENUMX
4580   BFD_RELOC_16C_REG14_C
4581 ENUMX
4582   BFD_RELOC_16C_REG16
4583 ENUMX
4584   BFD_RELOC_16C_REG16_C
4585 ENUMX
4586   BFD_RELOC_16C_REG20
4587 ENUMX
4588   BFD_RELOC_16C_REG20_C
4589 ENUMX
4590   BFD_RELOC_16C_ABS20
4591 ENUMX
4592   BFD_RELOC_16C_ABS20_C
4593 ENUMX
4594   BFD_RELOC_16C_ABS24
4595 ENUMX
4596   BFD_RELOC_16C_ABS24_C
4597 ENUMX
4598   BFD_RELOC_16C_IMM04
4599 ENUMX
4600   BFD_RELOC_16C_IMM04_C
4601 ENUMX
4602   BFD_RELOC_16C_IMM16
4603 ENUMX
4604   BFD_RELOC_16C_IMM16_C
4605 ENUMX
4606   BFD_RELOC_16C_IMM20
4607 ENUMX
4608   BFD_RELOC_16C_IMM20_C
4609 ENUMX
4610   BFD_RELOC_16C_IMM24
4611 ENUMX
4612   BFD_RELOC_16C_IMM24_C
4613 ENUMX
4614   BFD_RELOC_16C_IMM32
4615 ENUMX
4616   BFD_RELOC_16C_IMM32_C
4617 ENUMDOC
4618   NS CR16C Relocations.
4619
4620 ENUM
4621   BFD_RELOC_CR16_NUM8
4622 ENUMX
4623   BFD_RELOC_CR16_NUM16
4624 ENUMX
4625   BFD_RELOC_CR16_NUM32
4626 ENUMX
4627   BFD_RELOC_CR16_NUM32a
4628 ENUMX
4629   BFD_RELOC_CR16_REGREL0
4630 ENUMX
4631   BFD_RELOC_CR16_REGREL4
4632 ENUMX
4633   BFD_RELOC_CR16_REGREL4a
4634 ENUMX
4635   BFD_RELOC_CR16_REGREL14
4636 ENUMX
4637   BFD_RELOC_CR16_REGREL14a
4638 ENUMX
4639   BFD_RELOC_CR16_REGREL16
4640 ENUMX
4641   BFD_RELOC_CR16_REGREL20
4642 ENUMX
4643   BFD_RELOC_CR16_REGREL20a
4644 ENUMX
4645   BFD_RELOC_CR16_ABS20
4646 ENUMX
4647   BFD_RELOC_CR16_ABS24
4648 ENUMX
4649   BFD_RELOC_CR16_IMM4
4650 ENUMX
4651   BFD_RELOC_CR16_IMM8
4652 ENUMX
4653   BFD_RELOC_CR16_IMM16
4654 ENUMX
4655   BFD_RELOC_CR16_IMM20
4656 ENUMX
4657   BFD_RELOC_CR16_IMM24
4658 ENUMX
4659   BFD_RELOC_CR16_IMM32
4660 ENUMX
4661   BFD_RELOC_CR16_IMM32a
4662 ENUMX
4663   BFD_RELOC_CR16_DISP4
4664 ENUMX
4665   BFD_RELOC_CR16_DISP8
4666 ENUMX
4667   BFD_RELOC_CR16_DISP16
4668 ENUMX
4669   BFD_RELOC_CR16_DISP20
4670 ENUMX
4671   BFD_RELOC_CR16_DISP24
4672 ENUMX
4673   BFD_RELOC_CR16_DISP24a
4674 ENUMX
4675   BFD_RELOC_CR16_SWITCH8
4676 ENUMX
4677   BFD_RELOC_CR16_SWITCH16
4678 ENUMX
4679   BFD_RELOC_CR16_SWITCH32
4680 ENUMX
4681   BFD_RELOC_CR16_GOT_REGREL20
4682 ENUMX
4683   BFD_RELOC_CR16_GOTC_REGREL20
4684 ENUMX
4685   BFD_RELOC_CR16_GLOB_DAT
4686 ENUMDOC
4687   NS CR16 Relocations.
4688
4689 ENUM
4690   BFD_RELOC_CRX_REL4
4691 ENUMX
4692   BFD_RELOC_CRX_REL8
4693 ENUMX
4694   BFD_RELOC_CRX_REL8_CMP
4695 ENUMX
4696   BFD_RELOC_CRX_REL16
4697 ENUMX
4698   BFD_RELOC_CRX_REL24
4699 ENUMX
4700   BFD_RELOC_CRX_REL32
4701 ENUMX
4702   BFD_RELOC_CRX_REGREL12
4703 ENUMX
4704   BFD_RELOC_CRX_REGREL22
4705 ENUMX
4706   BFD_RELOC_CRX_REGREL28
4707 ENUMX
4708   BFD_RELOC_CRX_REGREL32
4709 ENUMX
4710   BFD_RELOC_CRX_ABS16
4711 ENUMX
4712   BFD_RELOC_CRX_ABS32
4713 ENUMX
4714   BFD_RELOC_CRX_NUM8
4715 ENUMX
4716   BFD_RELOC_CRX_NUM16
4717 ENUMX
4718   BFD_RELOC_CRX_NUM32
4719 ENUMX
4720   BFD_RELOC_CRX_IMM16
4721 ENUMX
4722   BFD_RELOC_CRX_IMM32
4723 ENUMX
4724   BFD_RELOC_CRX_SWITCH8
4725 ENUMX
4726   BFD_RELOC_CRX_SWITCH16
4727 ENUMX
4728   BFD_RELOC_CRX_SWITCH32
4729 ENUMDOC
4730   NS CRX Relocations.
4731
4732 ENUM
4733   BFD_RELOC_CRIS_BDISP8
4734 ENUMX
4735   BFD_RELOC_CRIS_UNSIGNED_5
4736 ENUMX
4737   BFD_RELOC_CRIS_SIGNED_6
4738 ENUMX
4739   BFD_RELOC_CRIS_UNSIGNED_6
4740 ENUMX
4741   BFD_RELOC_CRIS_SIGNED_8
4742 ENUMX
4743   BFD_RELOC_CRIS_UNSIGNED_8
4744 ENUMX
4745   BFD_RELOC_CRIS_SIGNED_16
4746 ENUMX
4747   BFD_RELOC_CRIS_UNSIGNED_16
4748 ENUMX
4749   BFD_RELOC_CRIS_LAPCQ_OFFSET
4750 ENUMX
4751   BFD_RELOC_CRIS_UNSIGNED_4
4752 ENUMDOC
4753   These relocs are only used within the CRIS assembler.  They are not
4754   (at present) written to any object files.
4755 ENUM
4756   BFD_RELOC_CRIS_COPY
4757 ENUMX
4758   BFD_RELOC_CRIS_GLOB_DAT
4759 ENUMX
4760   BFD_RELOC_CRIS_JUMP_SLOT
4761 ENUMX
4762   BFD_RELOC_CRIS_RELATIVE
4763 ENUMDOC
4764   Relocs used in ELF shared libraries for CRIS.
4765 ENUM
4766   BFD_RELOC_CRIS_32_GOT
4767 ENUMDOC
4768   32-bit offset to symbol-entry within GOT.
4769 ENUM
4770   BFD_RELOC_CRIS_16_GOT
4771 ENUMDOC
4772   16-bit offset to symbol-entry within GOT.
4773 ENUM
4774   BFD_RELOC_CRIS_32_GOTPLT
4775 ENUMDOC
4776   32-bit offset to symbol-entry within GOT, with PLT handling.
4777 ENUM
4778   BFD_RELOC_CRIS_16_GOTPLT
4779 ENUMDOC
4780   16-bit offset to symbol-entry within GOT, with PLT handling.
4781 ENUM
4782   BFD_RELOC_CRIS_32_GOTREL
4783 ENUMDOC
4784   32-bit offset to symbol, relative to GOT.
4785 ENUM
4786   BFD_RELOC_CRIS_32_PLT_GOTREL
4787 ENUMDOC
4788   32-bit offset to symbol with PLT entry, relative to GOT.
4789 ENUM
4790   BFD_RELOC_CRIS_32_PLT_PCREL
4791 ENUMDOC
4792   32-bit offset to symbol with PLT entry, relative to this relocation.
4793
4794 ENUM
4795   BFD_RELOC_CRIS_32_GOT_GD
4796 ENUMX
4797   BFD_RELOC_CRIS_16_GOT_GD
4798 ENUMX
4799   BFD_RELOC_CRIS_32_GD
4800 ENUMX
4801   BFD_RELOC_CRIS_DTP
4802 ENUMX
4803   BFD_RELOC_CRIS_32_DTPREL
4804 ENUMX
4805   BFD_RELOC_CRIS_16_DTPREL
4806 ENUMX
4807   BFD_RELOC_CRIS_32_GOT_TPREL
4808 ENUMX
4809   BFD_RELOC_CRIS_16_GOT_TPREL
4810 ENUMX
4811   BFD_RELOC_CRIS_32_TPREL
4812 ENUMX
4813   BFD_RELOC_CRIS_16_TPREL
4814 ENUMX
4815   BFD_RELOC_CRIS_DTPMOD
4816 ENUMX
4817   BFD_RELOC_CRIS_32_IE
4818 ENUMDOC
4819   Relocs used in TLS code for CRIS.
4820
4821 ENUM
4822   BFD_RELOC_860_COPY
4823 ENUMX
4824   BFD_RELOC_860_GLOB_DAT
4825 ENUMX
4826   BFD_RELOC_860_JUMP_SLOT
4827 ENUMX
4828   BFD_RELOC_860_RELATIVE
4829 ENUMX
4830   BFD_RELOC_860_PC26
4831 ENUMX
4832   BFD_RELOC_860_PLT26
4833 ENUMX
4834   BFD_RELOC_860_PC16
4835 ENUMX
4836   BFD_RELOC_860_LOW0
4837 ENUMX
4838   BFD_RELOC_860_SPLIT0
4839 ENUMX
4840   BFD_RELOC_860_LOW1
4841 ENUMX
4842   BFD_RELOC_860_SPLIT1
4843 ENUMX
4844   BFD_RELOC_860_LOW2
4845 ENUMX
4846   BFD_RELOC_860_SPLIT2
4847 ENUMX
4848   BFD_RELOC_860_LOW3
4849 ENUMX
4850   BFD_RELOC_860_LOGOT0
4851 ENUMX
4852   BFD_RELOC_860_SPGOT0
4853 ENUMX
4854   BFD_RELOC_860_LOGOT1
4855 ENUMX
4856   BFD_RELOC_860_SPGOT1
4857 ENUMX
4858   BFD_RELOC_860_LOGOTOFF0
4859 ENUMX
4860   BFD_RELOC_860_SPGOTOFF0
4861 ENUMX
4862   BFD_RELOC_860_LOGOTOFF1
4863 ENUMX
4864   BFD_RELOC_860_SPGOTOFF1
4865 ENUMX
4866   BFD_RELOC_860_LOGOTOFF2
4867 ENUMX
4868   BFD_RELOC_860_LOGOTOFF3
4869 ENUMX
4870   BFD_RELOC_860_LOPC
4871 ENUMX
4872   BFD_RELOC_860_HIGHADJ
4873 ENUMX
4874   BFD_RELOC_860_HAGOT
4875 ENUMX
4876   BFD_RELOC_860_HAGOTOFF
4877 ENUMX
4878   BFD_RELOC_860_HAPC
4879 ENUMX
4880   BFD_RELOC_860_HIGH
4881 ENUMX
4882   BFD_RELOC_860_HIGOT
4883 ENUMX
4884   BFD_RELOC_860_HIGOTOFF
4885 ENUMDOC
4886   Intel i860 Relocations.
4887
4888 ENUM
4889   BFD_RELOC_OPENRISC_ABS_26
4890 ENUMX
4891   BFD_RELOC_OPENRISC_REL_26
4892 ENUMDOC
4893   OpenRISC Relocations.
4894
4895 ENUM
4896   BFD_RELOC_H8_DIR16A8
4897 ENUMX
4898   BFD_RELOC_H8_DIR16R8
4899 ENUMX
4900   BFD_RELOC_H8_DIR24A8
4901 ENUMX
4902   BFD_RELOC_H8_DIR24R8
4903 ENUMX
4904   BFD_RELOC_H8_DIR32A16
4905 ENUMDOC
4906   H8 elf Relocations.
4907
4908 ENUM
4909   BFD_RELOC_XSTORMY16_REL_12
4910 ENUMX
4911   BFD_RELOC_XSTORMY16_12
4912 ENUMX
4913   BFD_RELOC_XSTORMY16_24
4914 ENUMX
4915   BFD_RELOC_XSTORMY16_FPTR16
4916 ENUMDOC
4917   Sony Xstormy16 Relocations.
4918
4919 ENUM
4920   BFD_RELOC_RELC
4921 ENUMDOC
4922   Self-describing complex relocations.
4923 COMMENT
4924
4925 ENUM
4926   BFD_RELOC_XC16X_PAG
4927 ENUMX
4928   BFD_RELOC_XC16X_POF
4929 ENUMX
4930   BFD_RELOC_XC16X_SEG
4931 ENUMX
4932   BFD_RELOC_XC16X_SOF
4933 ENUMDOC
4934   Infineon Relocations.
4935
4936 ENUM
4937   BFD_RELOC_VAX_GLOB_DAT
4938 ENUMX
4939   BFD_RELOC_VAX_JMP_SLOT
4940 ENUMX
4941   BFD_RELOC_VAX_RELATIVE
4942 ENUMDOC
4943   Relocations used by VAX ELF.
4944
4945 ENUM
4946   BFD_RELOC_MT_PC16
4947 ENUMDOC
4948   Morpho MT - 16 bit immediate relocation.
4949 ENUM
4950   BFD_RELOC_MT_HI16
4951 ENUMDOC
4952   Morpho MT - Hi 16 bits of an address.
4953 ENUM
4954   BFD_RELOC_MT_LO16
4955 ENUMDOC
4956   Morpho MT - Low 16 bits of an address.
4957 ENUM
4958   BFD_RELOC_MT_GNU_VTINHERIT
4959 ENUMDOC
4960   Morpho MT - Used to tell the linker which vtable entries are used.
4961 ENUM
4962   BFD_RELOC_MT_GNU_VTENTRY
4963 ENUMDOC
4964   Morpho MT - Used to tell the linker which vtable entries are used.
4965 ENUM
4966   BFD_RELOC_MT_PCINSN8
4967 ENUMDOC
4968   Morpho MT - 8 bit immediate relocation.
4969
4970 ENUM
4971   BFD_RELOC_MSP430_10_PCREL
4972 ENUMX
4973   BFD_RELOC_MSP430_16_PCREL
4974 ENUMX
4975   BFD_RELOC_MSP430_16
4976 ENUMX
4977   BFD_RELOC_MSP430_16_PCREL_BYTE
4978 ENUMX
4979   BFD_RELOC_MSP430_16_BYTE
4980 ENUMX
4981   BFD_RELOC_MSP430_2X_PCREL
4982 ENUMX
4983   BFD_RELOC_MSP430_RL_PCREL
4984 ENUMDOC
4985   msp430 specific relocation codes
4986
4987 ENUM
4988   BFD_RELOC_IQ2000_OFFSET_16
4989 ENUMX
4990   BFD_RELOC_IQ2000_OFFSET_21
4991 ENUMX
4992   BFD_RELOC_IQ2000_UHI16
4993 ENUMDOC
4994   IQ2000 Relocations.
4995
4996 ENUM
4997   BFD_RELOC_XTENSA_RTLD
4998 ENUMDOC
4999   Special Xtensa relocation used only by PLT entries in ELF shared
5000   objects to indicate that the runtime linker should set the value
5001   to one of its own internal functions or data structures.
5002 ENUM
5003   BFD_RELOC_XTENSA_GLOB_DAT
5004 ENUMX
5005   BFD_RELOC_XTENSA_JMP_SLOT
5006 ENUMX
5007   BFD_RELOC_XTENSA_RELATIVE
5008 ENUMDOC
5009   Xtensa relocations for ELF shared objects.
5010 ENUM
5011   BFD_RELOC_XTENSA_PLT
5012 ENUMDOC
5013   Xtensa relocation used in ELF object files for symbols that may require
5014   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
5015 ENUM
5016   BFD_RELOC_XTENSA_DIFF8
5017 ENUMX
5018   BFD_RELOC_XTENSA_DIFF16
5019 ENUMX
5020   BFD_RELOC_XTENSA_DIFF32
5021 ENUMDOC
5022   Xtensa relocations to mark the difference of two local symbols.
5023   These are only needed to support linker relaxation and can be ignored
5024   when not relaxing.  The field is set to the value of the difference
5025   assuming no relaxation.  The relocation encodes the position of the
5026   first symbol so the linker can determine whether to adjust the field
5027   value.
5028 ENUM
5029   BFD_RELOC_XTENSA_SLOT0_OP
5030 ENUMX
5031   BFD_RELOC_XTENSA_SLOT1_OP
5032 ENUMX
5033   BFD_RELOC_XTENSA_SLOT2_OP
5034 ENUMX
5035   BFD_RELOC_XTENSA_SLOT3_OP
5036 ENUMX
5037   BFD_RELOC_XTENSA_SLOT4_OP
5038 ENUMX
5039   BFD_RELOC_XTENSA_SLOT5_OP
5040 ENUMX
5041   BFD_RELOC_XTENSA_SLOT6_OP
5042 ENUMX
5043   BFD_RELOC_XTENSA_SLOT7_OP
5044 ENUMX
5045   BFD_RELOC_XTENSA_SLOT8_OP
5046 ENUMX
5047   BFD_RELOC_XTENSA_SLOT9_OP
5048 ENUMX
5049   BFD_RELOC_XTENSA_SLOT10_OP
5050 ENUMX
5051   BFD_RELOC_XTENSA_SLOT11_OP
5052 ENUMX
5053   BFD_RELOC_XTENSA_SLOT12_OP
5054 ENUMX
5055   BFD_RELOC_XTENSA_SLOT13_OP
5056 ENUMX
5057   BFD_RELOC_XTENSA_SLOT14_OP
5058 ENUMDOC
5059   Generic Xtensa relocations for instruction operands.  Only the slot
5060   number is encoded in the relocation.  The relocation applies to the
5061   last PC-relative immediate operand, or if there are no PC-relative
5062   immediates, to the last immediate operand.
5063 ENUM
5064   BFD_RELOC_XTENSA_SLOT0_ALT
5065 ENUMX
5066   BFD_RELOC_XTENSA_SLOT1_ALT
5067 ENUMX
5068   BFD_RELOC_XTENSA_SLOT2_ALT
5069 ENUMX
5070   BFD_RELOC_XTENSA_SLOT3_ALT
5071 ENUMX
5072   BFD_RELOC_XTENSA_SLOT4_ALT
5073 ENUMX
5074   BFD_RELOC_XTENSA_SLOT5_ALT
5075 ENUMX
5076   BFD_RELOC_XTENSA_SLOT6_ALT
5077 ENUMX
5078   BFD_RELOC_XTENSA_SLOT7_ALT
5079 ENUMX
5080   BFD_RELOC_XTENSA_SLOT8_ALT
5081 ENUMX
5082   BFD_RELOC_XTENSA_SLOT9_ALT
5083 ENUMX
5084   BFD_RELOC_XTENSA_SLOT10_ALT
5085 ENUMX
5086   BFD_RELOC_XTENSA_SLOT11_ALT
5087 ENUMX
5088   BFD_RELOC_XTENSA_SLOT12_ALT
5089 ENUMX
5090   BFD_RELOC_XTENSA_SLOT13_ALT
5091 ENUMX
5092   BFD_RELOC_XTENSA_SLOT14_ALT
5093 ENUMDOC
5094   Alternate Xtensa relocations.  Only the slot is encoded in the
5095   relocation.  The meaning of these relocations is opcode-specific.
5096 ENUM
5097   BFD_RELOC_XTENSA_OP0
5098 ENUMX
5099   BFD_RELOC_XTENSA_OP1
5100 ENUMX
5101   BFD_RELOC_XTENSA_OP2
5102 ENUMDOC
5103   Xtensa relocations for backward compatibility.  These have all been
5104   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
5105 ENUM
5106   BFD_RELOC_XTENSA_ASM_EXPAND
5107 ENUMDOC
5108   Xtensa relocation to mark that the assembler expanded the
5109   instructions from an original target.  The expansion size is
5110   encoded in the reloc size.
5111 ENUM
5112   BFD_RELOC_XTENSA_ASM_SIMPLIFY
5113 ENUMDOC
5114   Xtensa relocation to mark that the linker should simplify
5115   assembler-expanded instructions.  This is commonly used
5116   internally by the linker after analysis of a
5117   BFD_RELOC_XTENSA_ASM_EXPAND.
5118 ENUM
5119   BFD_RELOC_XTENSA_TLSDESC_FN
5120 ENUMX
5121   BFD_RELOC_XTENSA_TLSDESC_ARG
5122 ENUMX
5123   BFD_RELOC_XTENSA_TLS_DTPOFF
5124 ENUMX
5125   BFD_RELOC_XTENSA_TLS_TPOFF
5126 ENUMX
5127   BFD_RELOC_XTENSA_TLS_FUNC
5128 ENUMX
5129   BFD_RELOC_XTENSA_TLS_ARG
5130 ENUMX
5131   BFD_RELOC_XTENSA_TLS_CALL
5132 ENUMDOC
5133   Xtensa TLS relocations.
5134
5135 ENUM
5136   BFD_RELOC_Z80_DISP8
5137 ENUMDOC
5138   8 bit signed offset in (ix+d) or (iy+d).
5139
5140 ENUM
5141   BFD_RELOC_Z8K_DISP7
5142 ENUMDOC
5143   DJNZ offset.
5144 ENUM
5145   BFD_RELOC_Z8K_CALLR
5146 ENUMDOC
5147   CALR offset.
5148 ENUM
5149   BFD_RELOC_Z8K_IMM4L
5150 ENUMDOC
5151   4 bit value.
5152
5153 ENUM
5154    BFD_RELOC_LM32_CALL
5155 ENUMX
5156    BFD_RELOC_LM32_BRANCH
5157 ENUMX
5158    BFD_RELOC_LM32_16_GOT
5159 ENUMX
5160    BFD_RELOC_LM32_GOTOFF_HI16
5161 ENUMX
5162    BFD_RELOC_LM32_GOTOFF_LO16
5163 ENUMX
5164    BFD_RELOC_LM32_COPY
5165 ENUMX
5166    BFD_RELOC_LM32_GLOB_DAT
5167 ENUMX
5168    BFD_RELOC_LM32_JMP_SLOT
5169 ENUMX
5170    BFD_RELOC_LM32_RELATIVE
5171 ENUMDOC
5172  Lattice Mico32 relocations.
5173
5174 ENDSENUM
5175   BFD_RELOC_UNUSED
5176 CODE_FRAGMENT
5177 .
5178 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
5179 */
5180
5181 /*
5182 FUNCTION
5183         bfd_reloc_type_lookup
5184         bfd_reloc_name_lookup
5185
5186 SYNOPSIS
5187         reloc_howto_type *bfd_reloc_type_lookup
5188           (bfd *abfd, bfd_reloc_code_real_type code);
5189         reloc_howto_type *bfd_reloc_name_lookup
5190           (bfd *abfd, const char *reloc_name);
5191
5192 DESCRIPTION
5193         Return a pointer to a howto structure which, when
5194         invoked, will perform the relocation @var{code} on data from the
5195         architecture noted.
5196
5197 */
5198
5199 reloc_howto_type *
5200 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5201 {
5202   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
5203 }
5204
5205 reloc_howto_type *
5206 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
5207 {
5208   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
5209 }
5210
5211 static reloc_howto_type bfd_howto_32 =
5212 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
5213
5214 /*
5215 INTERNAL_FUNCTION
5216         bfd_default_reloc_type_lookup
5217
5218 SYNOPSIS
5219         reloc_howto_type *bfd_default_reloc_type_lookup
5220           (bfd *abfd, bfd_reloc_code_real_type  code);
5221
5222 DESCRIPTION
5223         Provides a default relocation lookup routine for any architecture.
5224
5225 */
5226
5227 reloc_howto_type *
5228 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5229 {
5230   switch (code)
5231     {
5232     case BFD_RELOC_CTOR:
5233       /* The type of reloc used in a ctor, which will be as wide as the
5234          address - so either a 64, 32, or 16 bitter.  */
5235       switch (bfd_get_arch_info (abfd)->bits_per_address)
5236         {
5237         case 64:
5238           BFD_FAIL ();
5239         case 32:
5240           return &bfd_howto_32;
5241         case 16:
5242           BFD_FAIL ();
5243         default:
5244           BFD_FAIL ();
5245         }
5246     default:
5247       BFD_FAIL ();
5248     }
5249   return NULL;
5250 }
5251
5252 /*
5253 FUNCTION
5254         bfd_get_reloc_code_name
5255
5256 SYNOPSIS
5257         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
5258
5259 DESCRIPTION
5260         Provides a printable name for the supplied relocation code.
5261         Useful mainly for printing error messages.
5262 */
5263
5264 const char *
5265 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
5266 {
5267   if (code > BFD_RELOC_UNUSED)
5268     return 0;
5269   return bfd_reloc_code_real_names[code];
5270 }
5271
5272 /*
5273 INTERNAL_FUNCTION
5274         bfd_generic_relax_section
5275
5276 SYNOPSIS
5277         bfd_boolean bfd_generic_relax_section
5278           (bfd *abfd,
5279            asection *section,
5280            struct bfd_link_info *,
5281            bfd_boolean *);
5282
5283 DESCRIPTION
5284         Provides default handling for relaxing for back ends which
5285         don't do relaxing.
5286 */
5287
5288 bfd_boolean
5289 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
5290                            asection *section ATTRIBUTE_UNUSED,
5291                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
5292                            bfd_boolean *again)
5293 {
5294   *again = FALSE;
5295   return TRUE;
5296 }
5297
5298 /*
5299 INTERNAL_FUNCTION
5300         bfd_generic_gc_sections
5301
5302 SYNOPSIS
5303         bfd_boolean bfd_generic_gc_sections
5304           (bfd *, struct bfd_link_info *);
5305
5306 DESCRIPTION
5307         Provides default handling for relaxing for back ends which
5308         don't do section gc -- i.e., does nothing.
5309 */
5310
5311 bfd_boolean
5312 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
5313                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
5314 {
5315   return TRUE;
5316 }
5317
5318 /*
5319 INTERNAL_FUNCTION
5320         bfd_generic_merge_sections
5321
5322 SYNOPSIS
5323         bfd_boolean bfd_generic_merge_sections
5324           (bfd *, struct bfd_link_info *);
5325
5326 DESCRIPTION
5327         Provides default handling for SEC_MERGE section merging for back ends
5328         which don't have SEC_MERGE support -- i.e., does nothing.
5329 */
5330
5331 bfd_boolean
5332 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
5333                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
5334 {
5335   return TRUE;
5336 }
5337
5338 /*
5339 INTERNAL_FUNCTION
5340         bfd_generic_get_relocated_section_contents
5341
5342 SYNOPSIS
5343         bfd_byte *bfd_generic_get_relocated_section_contents
5344           (bfd *abfd,
5345            struct bfd_link_info *link_info,
5346            struct bfd_link_order *link_order,
5347            bfd_byte *data,
5348            bfd_boolean relocatable,
5349            asymbol **symbols);
5350
5351 DESCRIPTION
5352         Provides default handling of relocation effort for back ends
5353         which can't be bothered to do it efficiently.
5354
5355 */
5356
5357 bfd_byte *
5358 bfd_generic_get_relocated_section_contents (bfd *abfd,
5359                                             struct bfd_link_info *link_info,
5360                                             struct bfd_link_order *link_order,
5361                                             bfd_byte *data,
5362                                             bfd_boolean relocatable,
5363                                             asymbol **symbols)
5364 {
5365   bfd *input_bfd = link_order->u.indirect.section->owner;
5366   asection *input_section = link_order->u.indirect.section;
5367   long reloc_size;
5368   arelent **reloc_vector;
5369   long reloc_count;
5370   bfd_size_type sz;
5371
5372   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
5373   if (reloc_size < 0)
5374     return NULL;
5375
5376   /* Read in the section.  */
5377   sz = input_section->rawsize ? input_section->rawsize : input_section->size;
5378   if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
5379     return NULL;
5380
5381   if (reloc_size == 0)
5382     return data;
5383
5384   reloc_vector = bfd_malloc (reloc_size);
5385   if (reloc_vector == NULL)
5386     return NULL;
5387
5388   reloc_count = bfd_canonicalize_reloc (input_bfd,
5389                                         input_section,
5390                                         reloc_vector,
5391                                         symbols);
5392   if (reloc_count < 0)
5393     goto error_return;
5394
5395   if (reloc_count > 0)
5396     {
5397       arelent **parent;
5398       for (parent = reloc_vector; *parent != NULL; parent++)
5399         {
5400           char *error_message = NULL;
5401           asymbol *symbol;
5402           bfd_reloc_status_type r;
5403
5404           symbol = *(*parent)->sym_ptr_ptr;
5405           if (symbol->section && elf_discarded_section (symbol->section))
5406             {
5407               bfd_byte *p;
5408               static reloc_howto_type none_howto
5409                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
5410                          "unused", FALSE, 0, 0, FALSE);
5411
5412               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
5413               _bfd_clear_contents ((*parent)->howto, input_bfd, p);
5414               (*parent)->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;
5415               (*parent)->addend = 0;
5416               (*parent)->howto = &none_howto;
5417               r = bfd_reloc_ok;
5418             }
5419           else
5420             r = bfd_perform_relocation (input_bfd,
5421                                         *parent,
5422                                         data,
5423                                         input_section,
5424                                         relocatable ? abfd : NULL,
5425                                         &error_message);
5426
5427           if (relocatable)
5428             {
5429               asection *os = input_section->output_section;
5430
5431               /* A partial link, so keep the relocs.  */
5432               os->orelocation[os->reloc_count] = *parent;
5433               os->reloc_count++;
5434             }
5435
5436           if (r != bfd_reloc_ok)
5437             {
5438               switch (r)
5439                 {
5440                 case bfd_reloc_undefined:
5441                   if (!((*link_info->callbacks->undefined_symbol)
5442                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5443                          input_bfd, input_section, (*parent)->address,
5444                          TRUE)))
5445                     goto error_return;
5446                   break;
5447                 case bfd_reloc_dangerous:
5448                   BFD_ASSERT (error_message != NULL);
5449                   if (!((*link_info->callbacks->reloc_dangerous)
5450                         (link_info, error_message, input_bfd, input_section,
5451                          (*parent)->address)))
5452                     goto error_return;
5453                   break;
5454                 case bfd_reloc_overflow:
5455                   if (!((*link_info->callbacks->reloc_overflow)
5456                         (link_info, NULL,
5457                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5458                          (*parent)->howto->name, (*parent)->addend,
5459                          input_bfd, input_section, (*parent)->address)))
5460                     goto error_return;
5461                   break;
5462                 case bfd_reloc_outofrange:
5463                 default:
5464                   abort ();
5465                   break;
5466                 }
5467
5468             }
5469         }
5470     }
5471
5472   free (reloc_vector);
5473   return data;
5474
5475 error_return:
5476   free (reloc_vector);
5477   return NULL;
5478 }