1 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
3 * doc/c-arc.texi: Fix typo.
5 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
7 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
10 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
12 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
13 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
15 (m68k_cpus): Adjust 5407 entry.
17 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
19 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
20 (m68k_cpus): Define 51QE cpu.
22 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
23 Joseph Myers <joseph@codesourcery.com>
25 * as.c (main): Flush stderr before printing listings to ensure
26 consistent output order across platforms.
28 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
30 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
32 2007-08-24 Joseph Myers <joseph@codesourcery.com>
33 Paul Brook <paul@codesourcery.com>
36 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
37 * as.c (show_usage): Document --debug-prefix-map option.
38 (parse_args): Handle --debug-prefix-map.
39 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
40 * stabs.c (stabs_generate_asm_file): Remap debug paths.
41 * Makefile.am (GAS_CFILES): Add remap.c
42 (GENERIC_OBJS): Add remap.o.
43 Regenerate dependencies.
44 * Makefile.in: Regenerate.
45 * doc/as.texinfo (--debug-prefix-map): Document.
47 2007-08-24 Aurelien Jarno <aurel32@debian.org>
49 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
52 2007-08-24 Anders Waldenborg <anders@0x63.nu>
53 Alan Modra <amodra@bigpond.net.au>
55 * config/tc-i386.c (lex_got): Don't scan past a comma.
57 2007-08-23 Ben Elliston <bje@au.ibm.com>
59 * config/tc-ppc.c (parse_cpu): Handle "750cl".
60 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
61 (md_show_usage): Document -m750cl.
62 (md_assemble): Handle two delimiters in succession (eg. `),').
63 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
64 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
65 * testsuite/gas/ppc/ppc750ps.s: New file.
66 * testsuite/gas/ppc/ppc750ps.d: Likewise.
68 2007-08-23 Ben Elliston <bje@au.ibm.com>
70 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
72 2007-08-17 Alan Modra <amodra@bigpond.net.au>
75 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
77 (i386_immediate): Detect and complain about more cases of
78 invalid immediate expressions. Return failure rather than
79 converting them to zero.
80 (i386_displacement): Likewise.
82 2007-08-17 Alan Modra <amodra@bigpond.net.au>
84 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
86 2007-08-14 Andreas Schwab <schwab@suse.de>
88 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
91 2007-08-12 Matthias Klose <doko@ubuntu.com>
93 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
94 $(top_srcdir)/../../bfd/doc.
95 * doc/Makefile.in: Regenerate.
97 2007-08-10 Nick Clifton <nickc@redhat.com>
99 * NEWS: Add a marker for the 2.18 features.
101 2007-08-09 Paul Brook <paul@codesourcery.com>
103 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
105 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
107 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
109 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
111 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
112 DWORD memory to Reg64 in Intel synax.
113 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
114 Reg32 in Intel syntax.
116 2007-07-25 Sterling Augustine <sterling@tensilica.com>
118 * config/tc-xtensa.c (xtensa_extui_opcode): New.
119 (xg_expand_assembly_insn): Check for invalid extui operands.
120 (md_begin): Initialize xtensa_extui_opcode.
122 2007-07-24 Nick Clifton <nickc@redhat.com>
124 * config/tc-mep.h (skip_whitespace): Remove definition.
126 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
128 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
131 (f32_patt): Remove f32_15.
132 (f16_patt): Likewise.
133 (i386_align_code): Updated to alt_long_patt for 64bit by
136 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
138 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
140 * config/tc-i386.c (i386_align_code): Enable alignment up to
141 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
144 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
146 2007-07-20 Nick Clifton <nickc@redhat.com>
148 * app.c (do_scrub_chars): Provide a one character buffer to hold a
149 pushed back newline at the end of an unterminated quoted string.
151 2007-07-14 Nick Clifton <nickc@redhat.com>
153 * config/tc-arm.c (create_register_alias): Return a boolean rather
155 Check the return value of insert_reg_alias and do not continue to
156 create aliases once an insertion has failed.
157 (s_unreq): Delete the all-upper-case and all-lower-case
158 alternatives as well.
160 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
162 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
165 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
167 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
170 2007-07-04 Richard Sandiford <richard@codesourcery.com>
172 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
173 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
174 Deprecate *x and *fx.
175 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
178 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
180 * config/obj-coff.h (x86_64_target_format): Renamed to ...
181 (i386_target_format): This
182 (TARGET_FORMAT): Use i386_target_format.
184 * config/tc-i386.c (x86_64_target_format): Removed.
185 (i386_target_format): Handle PE formats.
187 2007-07-04 Nick Clifton <nickc@redhat.com>
189 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
190 to get the right length of printed value.
192 2007-07-03 Nick Clifton <nickc@redhat.com>
194 * COPYING: Replace with GPLv3 text.
195 * app.c: Update copyright notice to refer to GPLv3.
196 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
197 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
198 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
199 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
200 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
201 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
202 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
203 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
204 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
205 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
206 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
207 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
208 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
209 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
210 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
211 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
212 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
213 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
214 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
215 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
216 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
217 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
218 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
219 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
220 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
221 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
222 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
223 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
224 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
225 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
226 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
227 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
228 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
229 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
230 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
231 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
232 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
233 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
234 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
235 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
236 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
237 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
238 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
239 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
240 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
241 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
242 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
243 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
244 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
245 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
246 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
247 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
248 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
249 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
250 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
251 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
252 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
253 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
254 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
255 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
257 * flonum-mult.c: Likewise, and also correct typo referring to
258 non-existant GNU Assembler General Public License.
259 * config/tc-m68851.h: Likewise.
260 * NEWS: Mention the new license. Also note where the 2.17 release
262 * config/e-crisaout.c: Add copyright header.
263 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
264 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
265 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
266 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
267 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
268 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
269 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
270 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
271 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
272 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
273 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
274 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
275 config/te-wince-pe.h: Likewise.
277 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
279 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
280 (install_operand): Add E encoding.
281 (md_begin): Check and skip initial '.' arg character.
282 (get_num): Add 0..511 case.
284 2007-07-03 Alan Modra <amodra@bigpond.net.au>
287 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
288 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
290 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
293 * app.c (do_scrub_chars <state 5>): Check for output buffer full
296 2007-07-02 Joseph Myers <joseph@codesourcery.com>
298 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
299 s_dtprel_internal): New.
300 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
301 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
302 BFD_RELOC_MIPS_TLS_DTPREL64.
304 2007-07-02 Alan Modra <amodra@bigpond.net.au>
306 * Makefile.am: Run "make dep-am".
307 * Makefile.in: Regenerate.
308 * aclocal.m4: Regenerate.
309 * config.in: Regenerate.
310 * doc/Makefile.in: Regenerate.
311 * po/POTFILES.in: Regenerate.
312 * po/gas.pot: Regenerate.
314 2007-07-02 Alan Modra <amodra@bigpond.net.au>
316 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
317 coff section flag values to bfd section flag.
319 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
321 * aclocal.m4: Regenerated.
322 * doc/Makefile.in: Likewise.
323 * Makefile.in: Likewise.
325 2007-06-29 Joseph Myers <joseph@codesourcery.com>
327 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
329 2007-06-29 Joseph Myers <joseph@codesourcery.com>
331 * as.c (create_obj_attrs_section): New.
332 (main): Call create_obj_attrs_section for ELF.
333 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
334 skip_past_comma, s_vendor_attribute): New.
335 (potable): Add gnu_attribute for ELF.
336 * read.h (s_vendor_attribute): Declare.
337 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
338 round s_vendor_attribute.
339 (aeabi_set_public_attributes): Update for new attributes
341 (arm_md_end): Remove attributes contents setting now done
344 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
346 * Makefile.am: Add CR16 related entry.
347 * Makefile.in: Regenerate.
348 * config/tc-cr16.h: New file
349 * config/tc-cr16.c: New file
350 * doc/c-cr16.texi: New file for cr16
351 * doc/all.texi: Entry for cr16
352 * doc/Makefile.am: Added c-cr16.texi
353 * doc/Makefile.in: Regenerate
354 * doc/as.texinfo: Entry for CR16 target
355 * NEWS: Announce the support for the new target.
357 2007-06-26 Paul Brook <paul@codesourcery.com>
359 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
361 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
363 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
365 * config/tc-i386.c (process_operands): Replace regKludge
368 2007-06-25 Richard Sandiford <richard@codesourcery.com>
370 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
371 * config/tc-mips.c (append_insn): Record which symbols have
372 R_MIPS16_26 relocations against them.
373 (mips_fix_adjustable): Don't reduce relocations against such symbols.
375 2007-06-22 Sterling Augustine <sterling@tensilica.com>
377 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
378 (frag_format_size): Handle RELAX_IMMED_STEP3.
379 (xtensa_relax_frag, md_convert_frag): Likewise.
380 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
381 (RELAX_IMMED_MAXSTEPS): Adjust.
382 * config/xtensa-relax.c (widen_spec_list): Add transitions from
383 wide branches to branch-over-jumps.
384 (build_transition): Handle wide branches in transition patterns.
386 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
388 * config/tc-i386.c (disp_size): New.
389 (imm_size): Likewise.
390 (output_disp): Use disp_size and imm_size.
391 (output_imm): Use imm_size.
393 2007-06-19 Sterling Augustine <sterling@tensilica.com>
395 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
396 use of literal_frag field.
397 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
398 in the literal_frag field.
399 (xtensa_move_literals): Use it here instead of searching. Update
400 literal_frag field with new value.
402 2007-06-14 Paul Brook <paul@codesourcery.com>
404 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
405 narrow shift by immediate.
407 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
409 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
411 * acinclude.m4: Don't include m4 files.
412 (BFD_BINARY_FOPEN): Removed.
413 Remove libtool kludge.
415 * Makefile.in: Regenerated.
416 * doc/Makefile.in: Likewise.
417 * aclocal.m4: Likewise.
418 * configure: Likewise.
420 2007-06-11 Sterling Augustine <sterling@tensilica.com>
421 Bob Wilson <bob.wilson@acm.org>
423 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
424 (XTENSA_PROP_NO_TRANSFORM): ...this.
425 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
426 (xtensa_mark_frags_for_org): New.
427 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
428 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
429 (get_frag_property_flags): Adjust reference to is_no_transform flag.
430 (xtensa_frag_flags_combinable): Likewise.
431 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
432 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
434 2007-06-06 Paul Brook <paul@codesourcery.com>
436 * config/tc-arm.c (s_align): Pad code sections appropriately.
438 2007-06-05 Paul Brook <paul@codesourcery.com>
440 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
442 2007-06-05 Nick Clifton <nickc@redhat.com>
445 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
447 2007-06-05 Alan Modra <amodra@bigpond.net.au>
449 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
451 (tc_gen_reloc): Abort if neither addsy or subsy is set.
452 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
453 * config/tc-spu.h (md_operand): Handle @ppu without sym.
455 2007-05-31 Paul Brook <paul@codesourcery.com>
457 * config/tc-arm.c (insns): Allow strex on M profile cores.
459 2007-05-29 David S. Miller <davem@davemloft.net>
460 Jakub Jelinek <jakub@redhat.com>
463 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
464 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
466 2007-05-29 Alan Modra <amodra@bigpond.net.au>
468 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
470 2007-05-29 Alan Modra <amodra@bigpond.net.au>
472 * config/tc-ppc.c: Convert to ISO C.
473 * config/tc-ppc.c: Likewise.
475 2007-05-29 Alan Modra <amodra@bigpond.net.au>
477 * write.h (EXEC_MACHINE_TYPE): Delete.
478 (string_byte_count, section_alignment): Delete.
480 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
482 * app.c (do_scrub_chars): Cope with \ at end of buffer.
484 2007-05-26 Alan Modra <amodra@bigpond.net.au>
486 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
487 top 32 bits of 64 bit value if so doing results in passing
488 range check. Rewrite sign extension fudges similarly. Enable
489 fudges for powerpc64 too. Report user value if range check
490 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
491 range rather than value, also to report user value on failure.
493 2007-03-25 Paul Brook <paul@codesourcery.com>
495 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
496 (do_t_add_sub): Correctly encode subs pc, lr, #const.
497 (do_t_mov_cmp): Correctly encode movs pc, lr.
499 2007-05-24 Steve Ellcey <sje@cup.hp.com>
501 * Makefile.in: Regnerate.
502 * configure: Regenerate.
503 * aclocal.m4: Regenerate.
504 * doc/Makefile.in: Regenerate.
506 2007-05-22 Bob Wilson <bob.wilson@acm.org>
508 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
509 and index entries about automatic alignment of ENTRY instructions.
511 2007-05-22 Nick Clifton <nickc@redhat.com>
513 * doc/as.texinfo: Use @copying around the copyright notice.
515 2007-05-18 Joseph Myers <joseph@codesourcery.com>
517 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
520 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
523 2003-06-05 Michal Ludvig <mludvig@suse.cz>
524 * doc/as.texinfo: Document new directives: .cfi_restore,
525 .cfi_undefined, .cfi_same_value, .cfi_return_column,
526 .cfi_remember_state and .cfi_restore_state.
528 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
530 * config/tc-m68k.c (md_apply_fix): Show value of out of range
531 fixups in error message.
532 (md_conver_frag_1): Propagate the fix source location and use
533 as_bad_where rather than fatal, for better error messages.
535 2007-05-16 Paul Brook <paul@codesourcery.com>
537 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
539 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
541 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
543 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
546 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
547 addend is stored for relocs against weak symbols.
548 (md_apply_fix): So not loose track of addend for relocs against
551 2007-05-14 Thiemo Seufer <ths@mips.com>
553 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
555 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
557 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
558 addri, addri.c, subi, and subi.c when immediate number is hex.
559 (score_insns): Remove subis and subis.c.
560 (do_sub_rdi16): Delete.
562 2007-05-11 Alan Modra <amodra@bigpond.net.au>
564 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
566 (md_assemble): Tidy use of insn.flag.
567 (get_imm): Likewise. Handle uppercase input too.
568 (spu_cons): New function.
569 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
570 (TC_FORCE_RELOCATION): Don't resolve them either.
572 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
574 * config/tc-arm.c (md_apply_fix): Generate more accurate
575 diagnostic when 8-bit immediate range is exceeded for
576 BFD_RELOC_ARM_OFFSET_IMM8.
578 2007-05-04 Alan Modra <amodra@bigpond.net.au>
581 * config/tc-i386.c (lex_got): Don't replace the reloc token with
582 a space if we already have a space.
584 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
586 * config/tc-i386.c (match_template): Don't explicitly check
587 suffix for crc32 in Intel mode.
588 (process_suffix): Issue an error for crc32 if the operand size
591 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
592 Nick Clifton <nickc@redhat.com>
595 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
596 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
597 (md_apply_fix): Put zero values into the frags referencing weak
600 2007-05-02 Alan Modra <amodra@bigpond.net.au>
603 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
606 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
608 * config/tc-i386.c (match_template): Check suffix for crc32 in
610 (process_suffix): Default the suffix of 8bit crc32 to
612 (check_byte_reg): Skip check for 8bit crc32.
614 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
616 * config/tc-i386.c (md_assemble): Use register_prefix in
617 error/warning message.
618 (check_byte_reg): Likewise.
619 (check_long_reg): Likewise.
620 (check_qword_reg): Likewise.
621 (check_word_reg): Likewise.
622 (process_operands): Likewise.
624 2007-04-30 Alan Modra <amodra@bigpond.net.au>
627 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
630 2007-04-28 Thiemo Seufer <ths@networkno.de>
632 * config/tc-mips.c: Fix comment.
634 2007-04-26 Anatoly Sokolov <aesok@post.ru>
636 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
637 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
638 * doc/c-avr.texi: Document new devices.
640 2007-04-24 Alan Modra <amodra@bigpond.net.au>
642 * Makefile.am: Run "make dep-am".
643 * Makefile.in: Regenerate.
645 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
647 * config/tc-m68k.c (mcf54455_ctrl): New.
648 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
649 (m68k_archs): Add isac.
650 (m68k_cpus): Add 54455 family.
651 (m68k_ip): Split Bg into Bb, Bs, Bg.
652 (m68k_elf_final_processing): Add ISA_C.
653 * doc/c-m68k.texi (M680x0 Options): Add isac.
655 2007-04-22 Alan Modra <amodra@bigpond.net.au>
657 * read.c (read_a_source_file): Skip multiple spaces to
658 cover hack in mmix md_start_line_hook which overwrites a
659 colon with a space. Delete sermon and needless assertion.
661 2007-04-21 Alan Modra <amodra@bigpond.net.au>
663 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
664 (md_atof): Make number_of_chars unsigned. Revert last change.
665 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
666 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
667 * config/tc-sh.h (md_optimize_expr): Likewise.
668 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
670 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
672 2007-04-21 Nick Clifton <nickc@redhat.com>
674 * config/atof-vax.c (md_atof): Fix comparison inside know().
676 * config/tc-ia64.c (emit_one_bundle): Fix typo.
678 2007-04-21 Alan Modra <amodra@bigpond.net.au>
680 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
681 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
682 Don't skip over NUL char.
683 (pseudo_set): Set X_op for registers to O_register.
684 * symbols.c (symbol_clone): Remove assertion that sym is defined.
685 (resolve_symbol_value): Resolve O_register symbols.
686 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
687 Instead find st(0) by hash lookup.
688 * config/tc-ppc.c (ppc_macro): Warning fix.
690 * as.h (ENABLE_CHECKING): Default define to 0.
691 (know): Assert if ENABLE_CHECKING.
692 (struct relax_type): Remove superfluous declaration.
693 * configure.in (--enable-checking): New.
694 * configure: Regenerate.
695 * config.in: Regenerate.
696 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
697 Check for duplicate powerpc_operands entries.
699 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
701 * config/tc-m68k.c (mcf5253_ctrl): New.
702 (mcf52223_ctrl): New.
703 (m68k_cpus): Add 5253, 52221, 52223.
705 * config/m68k-parse.h (RAMBAR_ALT): New.
706 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
707 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
708 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
709 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
710 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
712 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
713 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
714 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
715 to control register mapping.
717 2007-04-20 Alan Modra <amodra@bigpond.net.au>
719 * messages.c (as_internal_value_out_of_range): Fix typo in
720 error message. Return after printing domain error.
721 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
722 in max when shifting right.
724 2007-04-20 Alan Modra <amodra@bigpond.net.au>
726 * messages.c (as_internal_value_out_of_range): Extend to report
727 errors for values with invalid low bits set.
728 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
729 fields. Check that operands and opcode fields are disjoint.
730 (ppc_insert_operand): Check operands using mask rather than bit
731 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
733 (md_apply_fix): Adjust for struct powerpc_operand change.
735 2007-04-19 Paul Brook <paul@codesourcery.com>
737 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
738 Thumb-1. Add sanity check for bogus relaxations.
740 2007-04-19 Paul Brook <paul@codesourcery.com>
742 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
744 2007-04-19 Alan Modra <amodra@bigpond.net.au>
746 * Makefile.am: Run "make dep-am".
747 * Makefile.in: Regenerate.
749 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
751 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
753 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
755 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
757 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
759 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
760 (match_template): Handle operand size for crc32 in SSE4.2.
761 (process_suffix): Handle operand type for crc32 in SSE4.2.
762 (output_insn): Support SSE4.2.
764 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
766 * config/tc-i386.c (cpu_arch): Add .sse4.1.
767 (process_operands): Adjust implicit operand for blendvpd,
768 blendvps and pblendvb in SSE4.1.
769 (output_insn): Support SSE4.1.
771 2007-04-18 Paul Brook <paul@codesourcery.com>
773 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
775 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
777 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
778 of as_warn_where for misaligned data.
780 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
782 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
785 2007-04-14 Steve Ellcey <sje@cup.hp.com>
787 * Makefile.am: Add ACLOCAL_AMFLAGS.
788 * Makefile.in: Regenerate.
790 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
792 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
793 (sh_optimize_expr): Likewise.
794 * config/tc-sh.h (md_optimize_expr): Define.
795 (sh_optimize_expr): Prototype.
797 2007-04-06 Matt Thomas <matt@netbsd.org>
799 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
800 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
801 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
803 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
805 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
807 2007-04-04 Paul Brook <paul@codesourcery.com>
809 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
810 (insns): Use I15 for vext.
812 2007-04-04 Paul Brook <paul@codesourcery.com>
814 * configure.tgt: Loosen checks for arm uclinux eabi targets.
816 2007-04-02 Sterling Augustine <sterling@tensilica.com>
818 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
819 outputting_stabs_line_debug.
821 2007-03-26 Anatoly Sokolov <aesok@post.ru>
823 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
824 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
826 * doc/c-avr.texi: Document new devices.
828 2007-04-02 Richard Sandiford <richard@codesourcery.com>
830 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
831 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
832 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
834 2007-03-30 Sterling Augustine <sterling@tensilica.com>
835 Bob Wilson <bob.wilson@acm.org>
837 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
838 Do not check is_loop_target flag.
839 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
840 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
841 xtensa_move_labels for alignment of loop opcodes.
843 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
845 * config/tc-i386.c (process_suffix): Reindent a bit.
847 2007-03-30 Paul Brook <paul@codesourcery.com>
849 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
850 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
851 (do_t_push_pop): Use encode_thumb2_ldmstm.
853 2007-03-29 DJ Delorie <dj@redhat.com>
855 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
856 (md_relax_table): Add entries for ADJNZ macros.
857 (M32C_Macros): Add ADJNZ macros.
858 (subtype_mappings): Add entries for ADJNZ macros.
859 (insn_to_subtype): Check for adjnz and sbjnz insns.
860 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
861 (md_convert_frag): Convert adjnz and sbjnz.
863 2007-03-29 Nick Clifton <nickc@redhat.com>
865 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
867 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
868 using ITBL_NUMBER_OF_PROCESSORS.
869 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
871 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
873 * config/tc-i386.c (build_modrm_byte): For instructions with 2
874 register operands, encode destination in i.rm.regmem if its
877 2007-03-28 Richard Sandiford <richard@codesourcery.com>
878 Phil Edwards <phil@codesourcery.com>
880 * doc/as.texinfo: Put the contents after the title page rather
881 than at the end of the document.
883 2007-03-27 Alan Modra <amodra@bigpond.net.au>
885 * NEWS: Mention ".reloc".
887 2007-03-26 Sterling Augustine <sterling@tensilica.com>
889 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
890 in FLIX instructions.
892 2007-03-26 Julian Brown <julian@codesourcery.com>
894 * config/tc-arm.c (arm_it): Add immisfloat field.
895 (parse_qfloat_immediate): Disallow integer syntax for floating-point
896 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
897 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
899 (neon_cmode_for_move_imm): Reject non-float immediates for float
901 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
903 2007-03-26 Julian Brown <julian@codesourcery.com>
905 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
907 2007-03-26 Alan Modra <amodra@bigpond.net.au>
909 * doc/as.texinfo (Reloc): Document.
910 * read.c (potable): Add "reloc".
911 (s_reloc): New function.
912 * write.c (reloc_list): New global var.
913 (resolve_reloc_expr_symbols): New function.
914 (write_object_file): Call it.
915 (write_relocs): Process reloc_list.
916 * write.h (struct reloc_list): New.
917 (reloc_list): Declare.
919 2007-03-24 Paul Brook <paul@codesourcery.com>
921 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
923 2007-03-24 Paul Brook <paul@codesourcery.com>
924 Mark Shinwell <shinwell@codesourcery.com>
926 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
927 (parse_operands): Don't expect comma if first operand missing.
929 (do_srs): Encode register number, checking it is r13. Update comment.
930 (insns): Update SRS entries to take a register.
932 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
934 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
936 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
938 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
939 attempt to jump to the next instruction into NOPs.
941 2007-03-23 Alan Modra <amodra@bigpond.net.au>
943 * config/tc-spu.c: Don't include opcode/spu.h.
944 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
945 (md_apply_fix): Adjust.
946 * config/tc-spu.h: Include opcode/spu.h.
947 (struct tc_fix_info): New.
948 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
949 (TC_FORCE_RELOCATION): Define.
951 2007-03-22 Joseph Myers <joseph@codesourcery.com>
953 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
955 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
957 * config/tc-i386.c (process_suffix): Check 0x90 instead of
958 xchg for xchg %rax,%rax.
960 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
962 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
963 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
965 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
968 * config/tc-i386.c (match_template): Properly handle 64bit mode
971 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
974 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
976 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
978 * Makefile.am: Run dep-am.
979 * Makefile.in: Regenerated.
981 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
983 * config/tc-i386.h: Include "opcodes/i386-opc.h".
984 (NOP_OPCODE): Removed.
985 (template): Likewise.
987 2007-03-21 Andreas Schwab <schwab@suse.de>
989 * config/tc-i386.h (NOP_OPCODE): Restore.
991 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
993 * config/tc-arm.c (do_mul): Don't warn about overlapping
994 Rd and Rm operands when assembling for v6 or above.
995 Correctly capitalize register names in the messages.
996 (do_mlas): Likewise. Delete spurious blank line.
998 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1000 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1002 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1004 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1006 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1009 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1012 * app.c (do_scrub_chars): PUT after setting states.
1014 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1016 * Makefile.am: Run "make dep-am".
1017 * Makefile.in: Regenerated.
1019 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1021 (md_begin): Check reg_name != NULL for the last entry in
1024 * config/tc-i386.h: Move many entries to opcode/i386.h and
1027 * configure.in (need_opcodes): Set true for i386.
1028 * configure: Regenerated.
1030 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1032 * Makefile.am (REPORT_BUGS_TO): Removed.
1033 (INCLUDES): Remove -DREPORT_BUGS_TO.
1034 * Makefile.in: Regenerated.
1036 * configure.in (--with-bugurl): Removed.
1037 * configure: Regenerated.
1039 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1040 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1041 (TEXI2DVI): Likewise.
1042 (gasver.texi): Removed.
1043 (MOSTLYCLEANFILES): Remove gasver.texi.
1044 (as.1): Don't depend on gasver.texi.
1045 * doc/Makefile.in: Regenerated.
1047 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1049 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1051 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1052 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1053 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1054 * gas/symbols.c (copy_symbol_attributes): Use
1055 TC_COPY_SYMBOL_ATTRIBUTES.
1057 2007-03-14 Paul Brook <paul@codesourcery.com>
1059 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1061 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1064 * write.c (relax_segment): Insert extra alignment padding
1065 to break infinite relax loop when given impossible
1066 gcc_except_table assembly.
1068 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1070 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1071 on i.tm.base_opcode.
1072 (match_template): Likewise.
1073 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1075 * config/tc-i386.h (Opcode_D): New.
1076 (Opcode_FloatR): Likewise.
1077 (Opcode_FloatD): Likewise.
1080 (FloatMF): Likewise.
1084 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1086 * app.c (do_scrub_chars): Recognize comments after # line "file".
1087 * read.c (get_linefile_number): New.
1088 (s_app_line): Accept ill-formed .linefile lines as comments.
1090 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1092 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1094 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1096 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1097 * as.h (new_logical_line_flags): New.
1098 * input-scrub.c (new_logical_line): Turned into wrapper for...
1099 (new_logical_line_flags): this. Handle flags.
1100 * read.c (potable): Add linefile. Adjust appline argument.
1101 (s_app_file): Fake .appfiles no more.
1102 (s_app_line): For .linefile, accept file name and flags.
1104 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1106 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1108 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1110 * Makefile.am: Run "make dep-am".
1111 * Makefile.in: Regenerate.
1112 * po/POTFILES.in: Regenerate.
1114 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1116 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1118 * doc/Makefile.am (gasver.texi): Define BUGURL.
1119 * doc/as.texinfo: Use BUGURL.
1120 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1122 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1124 * config/tc-s390.c (md_parse_option): z9-ec option added.
1126 2007-03-02 Paul Brook <paul@codesourcery.com>
1128 * config/tc-arm.c (relax_immediate): Always return positive values.
1129 (relaxed_symbol_addr): New function.
1130 (relax_adr, relax_branch): Use it.
1131 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1133 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1135 * as.c (parse_args): Update copyright date.
1137 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1139 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1141 2007-02-28 Nick Clifton <nickc@redhat.com>
1144 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1145 just return -1 whenever a problem is encountered.
1146 (md_assemble): If do_assemble returns -1 generate a non-fatal
1147 error message and return.
1150 * config/tc-msp430.c (line_separator_char): Change to '{'.
1152 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1154 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1155 (build_jump_insn): Likewise.
1156 (build_insn): Likewise.
1157 (s_m68hc11_relax): Likewise.
1159 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1161 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1163 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1165 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1167 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1169 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1170 (md_assemble): Likewise.
1172 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1174 * write.c (size_seg): Always clear SEC_RELOC here.
1175 (install_reloc): New function, extracted from..
1176 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1177 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1178 testing frag size. Set SEC_RELOC here.
1180 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1183 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1185 2007-02-20 Thiemo Seufer <ths@mips.com>
1187 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1189 2007-02-20 Thiemo Seufer <ths@mips.com>
1191 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1193 2007-02-20 Thiemo Seufer <ths@mips.com>
1194 Chao-Ying Fu <fu@mips.com>
1196 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1197 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1198 (macro_build): Add case '2'.
1199 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1200 (validate_mips_insn): Add support for balign instruction.
1201 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1202 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1203 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1204 command line options.
1205 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1206 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1207 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1208 .set dspr2, .set nodspr2.
1210 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1212 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1213 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1215 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1217 * write.c (TC_FX_SIZE_SLACK): Define.
1218 (write_relocs): Reinstate check for fixup within frag.
1219 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1220 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1221 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1222 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1223 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1225 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1226 Nathan Sidwell <nathan@codesourcery.com>
1227 Vladimir Prus <vladimir@codesourcery.com
1228 Joseph Myers <joseph@codesourcery.com>
1230 * configure.in (--with-bugurl): New option.
1231 * configure: Regenerate.
1232 * dep-in.sed: Remove bin-bugs.h.
1233 * Makefile.am (REPORT_BUGS_TO): Define.
1234 (INCLUDES): Define REPORT_BUGS_TO.
1235 (DEP_INCLUDES): Likewise.
1236 ($(OBJS)): No longer depend on bin-bugs.h.
1237 * Makefile.in: Regenerate.
1238 * doc/Makefile.in: Regenerate.
1239 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1240 * as.h: Remove include of bin-bugs.h.
1242 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1244 * write.c: White space fixes.
1245 (fixup_segment): Move symbol_mri_common_p adjustments..
1246 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1247 (adjust_reloc_syms): ..to here.
1249 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1251 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1252 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1253 (subseg_set_rest): Remove unnecessary cast.
1254 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1255 Remove unnecessary forward declarations and casts.
1256 (set_symtab): Delete extern bfd_alloc.
1257 (fixup_segment): Move.
1259 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1261 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1262 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1263 (mcf5475_ctrl, mcf5485_ctrl): New.
1264 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1265 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1266 (init_table): Add asid, mmubar, adjust rombar0.
1268 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1270 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1271 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1272 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1273 code, and test for these insns using a combination of
1274 opcode_modifier and operand_types.
1276 2007-02-07 Paul Brook <paul@codesourcery.com>
1278 * configure.tgt: Add arm*-*-uclinux-*eabi.
1280 2007-02-05 Dave Brolley <brolley@redhat.com>
1281 Richard Sandiford <rsandifo@redhat.com>
1282 DJ Delorie <dj@redhat.com>
1283 Stan Cox <scox@redhat.com>
1284 Jim Blandy <jimb@redhat.com>
1285 Nick Clifton <nickc@redhat.com>
1286 Jim Wilson <wilson@redhat.com>
1287 Frank Ch. Eigler <fche@redhat.com>
1288 Graydon Hoare <graydon@redhat.com>
1289 Ben Elliston <bje@redhat.com>
1290 John Healy <jhealy@redhat.com>
1291 Richard Henderson <rth@redhat.com>
1293 * Makefile.am (CPU_TYPES): Add mep.
1294 (TARGET_CPU_CFILES): Add tc-mep.c.
1295 (TARGET_CPU_HFILES): Add tc-mep.h.
1296 (DEPTC_mep_elf): New variable.
1297 (DEPTC_mep_coff): Likewise.
1298 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1299 * configure.in: Support mep.
1300 * configure.tgt: Likewise.
1301 * config/tc-mep.c: New file.
1302 * config/obj-elf.c: New file.
1303 * config/tc-mep.c: New file.
1304 * config/tc-mep.h: New file.
1305 * testsuite/gas/mep: New testsuite with content.
1306 * Makefile.in: Regenerate.
1307 * configure: Regenerate.
1309 2007-02-05 Dave Brolley <brolley@redhat.com>
1311 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1312 (complex_reloc_installation_howto): Removed.
1314 2007-02-05 Dave Brolley <brolley@redhat.com>
1315 Graydon Hoare <graydon@redhat.com>
1316 DJ Delorie <dj@redhat.com>
1317 Catherine Moore <clm@redhat.com>
1318 Michael Chastain <chastain@redhat.com>
1319 Frank Ch. Eigler <fche@redhat.com>
1321 * symbols.c (use_complex_relocs_for): New, to decide
1322 when to use complex relocs. Add signed RELC support.
1323 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1324 encode expression symbols as mangled complex relocation symbols (when
1325 compiled with -DOBJ_COMPLEX_RELOC).
1326 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1327 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1328 encode_addend with new args. Modify to get start, length from
1329 ifield whenever it is set. Also change condition on which
1330 self-describing relocs are encoded. Add hook into
1331 gas_cgen_encode_addend.
1332 (queue_fixup_recursively): Add signed RELC support. Change from masked
1333 expr to trunc flag. Restore assignment of sub-field value to
1334 temporary in fixups array. Reflect changed meaning of last arg to
1335 queue_fixup_recursively.
1336 (fixup): Add cgen_maybe_multi_ifield member.
1337 (make_right_shifted_expr): New function.
1338 (queue_fixup): Change to recursive function that fragments
1339 fixups if operand has a multi-ifield.
1340 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1341 symbols, call weak_operand_overflow_check, and fragment call
1342 queue_fixup with operand fields.
1343 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1344 (weak_operand_overflow_check): New function to try to select
1346 (gas_cgen_encode_addend): New function for relc.
1347 (gas_cgen_install_complex_reloc): Likewise.
1348 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1349 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1350 cgen_maybe_multi_ifield field to fx_cgen substructure.
1351 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1352 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1354 2007-02-03 DJ Delorie <dj@delorie.com>
1356 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1358 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1359 (m32c_cons_fix_new): Prototype.
1361 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1363 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1364 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1366 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1368 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1369 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1370 (map_suffix_reloc_to_operator): New.
1371 (map_operator_to_reloc): New.
1372 (expression_maybe_register): Fix incorrect test of return value from
1373 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1374 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1376 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1378 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1379 (tinsn_get_tok): Delete prototype.
1380 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1382 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1384 * config/xtensa-relax.h (struct build_instr): Delete id field.
1385 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1387 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1388 set op_data fields to zero.
1389 (parse_id_constant): Delete.
1390 (build_transition): Remove code to handle numbered literals and labels.
1392 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1394 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1395 (build_transition_table): Likewise.
1397 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1399 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1401 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1403 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1405 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1406 (struct fix <fx_plt>): Rename to tcbit2.
1407 * write.c (fix_new_internal): Adjust.
1408 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1409 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1410 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1411 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1412 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1413 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1414 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1415 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1416 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1417 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1418 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1419 Instead, compare fx_r_type.
1420 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1421 fx_tcbit in place of fx_plt.
1422 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1423 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1426 2007-01-30 Nick Clifton <nickc@redhat.com>
1428 * as.c (main): Mark symbols created via the --defsym command line
1429 option as volatile so that they can be overridden later on by a
1430 .set directive. This maintains compatibility with the behaviour
1431 of earlier versions of the assembler.
1432 * doc/as.texinfo (--defsym): Document that the defined symbol's
1433 value can be overridden via a .set directive.
1435 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1437 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1438 (swap_2_operands): This. Take 2 ints.
1439 (md_assemble): Updated.
1440 (swap_operands): Call swap_2_operands to swap 2 operands.
1442 2007-01-24 DJ Delorie <dj@redhat.com>
1444 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1446 2007-01-22 Nick Clifton <nickc@redhat.com>
1449 * tc-score.c: Remove unnecessary uses of _().
1450 Make the err_msg[] a file level local array in order to save
1452 Remove unnecessary sprintf()s.
1454 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1457 * config/tc-score.c : Using _() for const string.
1458 Do not assign inst.error with a local string pointer.
1459 (md_section_align): Pad section.
1461 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1463 * config/tc-i386.c (build_modrm_byte): Check number of operands
1464 when procssing memory/register operand.
1466 2007-01-12 Nick Clifton <nickc@redhat.com>
1469 * macro.c (expand_irp): Do not ignore spaces inside quoted
1472 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1474 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1475 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1476 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1477 (TC_FORCE_RELOCATION): Define.
1478 (TC_FORCE_RELOCATION_LOCAL): Define.
1479 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1481 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1483 * input-file.c (input_file_open): Check fgets return.
1485 2007-01-11 Paul Brook <paul@codesourcery.com>
1487 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1489 2007-01-11 Nick Clifton <nickc@redhat.com>
1492 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1495 * config/tc-mcore.c (md_number_to_chars): Use
1496 number_to_chars_{big|little}endian.
1498 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1500 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1501 architecture by itself.
1502 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1503 (m68k_elf_final_processing): Treat Fido as an architecture by
1506 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1508 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1510 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1512 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1513 depending on allow_naked_reg.
1515 2007-01-04 Paul Brook <paul@codesourcery.com>
1517 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1519 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1522 * config/tc-i386.c (register_prefix): New.
1523 (set_intel_syntax): Set set_intel_syntax to "" if register
1524 prefix isn't needed.
1525 (check_byte_reg): Use register_prefix for error message.
1526 (check_long_reg): Likewise.
1527 (check_qword_reg): Likewise.
1528 (check_word_reg): Likewise.
1530 2007-01-04 Julian Brown <julian@codesourcery.com>
1532 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1533 (do_neon_qshl_imm): Likewise.
1534 (do_neon_rshl): New function. Handle rounding variants of
1535 v{q}shl-by-register.
1536 (insns): Use do_neon_rshl for vrshl, vqrshl.
1538 2007-01-04 Paul Brook <paul@codesourcery.com>
1540 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1543 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1545 * config/tc-i386.c (swap_operands): Remove branches.
1547 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1549 * config/tc-i386.c: Update copyright year.
1550 * config/tc-i386.h: Likewise.
1552 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1554 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1557 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1559 * config/tc-i386.c: Convert to ISO C90 formatting
1560 * config/tc-i386.h: Likewise.
1562 2007-01-03 David Daney <ddaney@avtrex.com>
1564 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1567 For older changes see ChangeLog-2006
1573 version-control: never