gas/config/tc-i960.h

   1 /* tc-i960.h - Basic 80960 instruction formats.
   2    Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999,
   3    2000
   4    Free Software Foundation, Inc.
   5
   6    This file is part of GAS, the GNU Assembler.
   7
   8    GAS is free software; you can redistribute it and/or modify
   9    it under the terms of the GNU General Public License as
  10    published by the Free Software Foundation; either version 2,
  11    or (at your option) any later version.
  12
  13    GAS is distributed in the hope that it will be useful, but
  14    WITHOUT ANY WARRANTY; without even the implied warranty of
  15    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
  16    the GNU General Public License for more details.
  17
  18    You should have received a copy of the GNU General Public License
  19    along with GAS; see the file COPYING.  If not, write to the Free
  20    Software Foundation, 59 Temple Place - Suite 330, Boston, MA
  21    02111-1307, USA.  */
  22
  23 #ifndef TC_I960
  24 #define TC_I960 1
  25
  26 #ifdef OBJ_ELF
  27 #define TARGET_FORMAT "elf32-i960"
  28 #define TARGET_ARCH bfd_arch_i960
  29 #endif
  30
  31 #define TARGET_BYTES_BIG_ENDIAN 0
  32
  33 #define WORKING_DOT_WORD
  34
  35 /*
  36  * The 'COJ' instructions are actually COBR instructions with the 'b' in
  37  * the mnemonic replaced by a 'j';  they are ALWAYS "de-optimized" if necessary:
  38  * if the displacement will not fit in 13 bits, the assembler will replace them
  39  * with the corresponding compare and branch instructions.
  40  *
  41  * All of the 'MEMn' instructions are the same format; the 'n' in the name
  42  * indicates the default index scale factor (the size of the datum operated on).
  43  *
  44  * The FBRA formats are not actually an instruction format.  They are the
  45  * "convenience directives" for branching on floating-point comparisons,
  46  * each of which generates 2 instructions (a 'bno' and one other branch).
  47  *
  48  * The CALLJ format is not actually an instruction format.  It indicates that
  49  * the instruction generated (a CTRL-format 'call') should have its relocation
  50  * specially flagged for link-time replacement with a 'bal' or 'calls' if
  51  * appropriate.
  52  */
  53
  54 /* tailor gas */
  55 #define SYMBOLS_NEED_BACKPOINTERS
  56 #define LOCAL_LABELS_FB 1
  57 #define BITFIELD_CONS_EXPRESSIONS
  58
  59 /* tailor the coff format */
  60 #define BFD_ARCH                                bfd_arch_i960
  61 #define COFF_FLAGS                              F_AR32WR
  62 #define COFF_MAGIC                              I960ROMAGIC
  63 #define OBJ_COFF_SECTION_HEADER_HAS_ALIGNMENT
  64 #define OBJ_COFF_MAX_AUXENTRIES                 (2)
  65 #define TC_COUNT_RELOC(FIXP)                    (!(FIXP)->fx_done)
  66 #define TC_COFF_FIX2RTYPE(FIXP)                 tc_coff_fix2rtype(FIXP)
  67 #define TC_COFF_SIZEMACHDEP(FRAGP)              tc_coff_sizemachdep(FRAGP)
  68 #define TC_COFF_SET_MACHINE(HDRS)               tc_headers_hook (HDRS)
  69 extern void tc_headers_hook ();
  70 extern short tc_coff_fix2rtype ();
  71 extern int tc_coff_sizemachdep ();
  72
  73 /* MEANING OF 'n_other' in the symbol record.
  74  *
  75  * If non-zero, the 'n_other' fields indicates either a leaf procedure or
  76  * a system procedure, as follows:
  77  *
  78  *      1 <= n_other <= 32 :
  79  *              The symbol is the entry point to a system procedure.
  80  *              'n_value' is the address of the entry, as for any other
  81  *              procedure.  The system procedure number (which can be used in
  82  *              a 'calls' instruction) is (n_other-1).  These entries come from
  83  *              '.sysproc' directives.
  84  *
  85  *      n_other == N_CALLNAME
  86  *              the symbol is the 'call' entry point to a leaf procedure.
  87  *              The *next* symbol in the symbol table must be the corresponding
  88  *              'bal' entry point to the procedure (see following).  These
  89  *              entries come from '.leafproc' directives in which two different
  90  *              symbols are specified (the first one is represented here).
  91  *
  92  *
  93  *      n_other == N_BALNAME
  94  *              the symbol is the 'bal' entry point to a leaf procedure.
  95  *              These entries result from '.leafproc' directives in which only
  96  *              one symbol is specified, or in which the same symbol is
  97  *              specified twice.
  98  *
  99  * Note that an N_CALLNAME entry *must* have a corresponding N_BALNAME entry,
 100  * but not every N_BALNAME entry must have an N_CALLNAME entry.
 101  */
 102 #define N_CALLNAME      ((char)-1)
 103 #define N_BALNAME       ((char)-2)
 104
 105 /* i960 uses a custom relocation record.  */
 106
 107 /* let obj-aout.h know */
 108 #define CUSTOM_RELOC_FORMAT 1
 109 /* let aout_gnu.h know */
 110 #define N_RELOCATION_INFO_DECLARED 1
 111 struct relocation_info
 112   {
 113     int r_address;              /* File address of item to be relocated */
 114     unsigned
 115       r_index:24,               /* Index of symbol on which relocation is based*/
 116       r_pcrel:1,                /* 1 => relocate PC-relative; else absolute
 117                                  *      On i960, pc-relative implies 24-bit
 118                                  *      address, absolute implies 32-bit.
 119                                  */
 120       r_length:2,               /* Number of bytes to relocate:
 121                                  *      0 => 1 byte
 122                                  *      1 => 2 bytes
 123                                  *      2 => 4 bytes -- only value used for i960
 124                                  */
 125       r_extern:1, r_bsr:1,      /* Something for the GNU NS32K assembler */
 126       r_disp:1,                 /* Something for the GNU NS32K assembler */
 127       r_callj:1,                /* 1 if relocation target is an i960 'callj' */
 128       nuthin:1;                 /* Unused                               */
 129   };
 130
 131 #ifdef OBJ_COFF
 132
 133 /* We store the bal information in the sy_tc field.  */
 134 #define TC_SYMFIELD_TYPE symbolS *
 135
 136 #define TC_ADJUST_RELOC_COUNT(FIXP,COUNT) \
 137   { fixS *tcfixp = (FIXP); \
 138     for (;tcfixp;tcfixp=tcfixp->fx_next) \
 139       if (tcfixp->fx_tcbit && tcfixp->fx_addsy != 0) \
 140         ++(COUNT); \
 141   }
 142 #endif
 143
 144 extern int i960_validate_fix PARAMS ((struct fix *, segT, symbolS **));
 145 #define TC_VALIDATE_FIX(FIXP,SEGTYPE,LABEL) \
 146         if (i960_validate_fix (FIXP, SEGTYPE, &add_symbolP) != 0) goto LABEL
 147
 148 #ifdef OBJ_ELF
 149 #define TC_RELOC_RTSYM_LOC_FIXUP(FIX)  \
 150   ((FIX)->fx_addsy == NULL \
 151    || (! S_IS_EXTERNAL ((FIX)->fx_addsy) \
 152        && ! S_IS_WEAK ((FIX)->fx_addsy) \
 153        && S_IS_DEFINED ((FIX)->fx_addsy) \
 154        && ! S_IS_COMMON ((FIX)->fx_addsy)))
 155 #endif
 156
 157 #ifndef OBJ_ELF
 158 #define tc_fix_adjustable(FIXP)         ((FIXP)->fx_bsr == 0)
 159 /* This arranges for gas/write.c to not apply a relocation if
 160    tc_fix_adjustable() says it is not adjustable.  */
 161 #define TC_FIX_ADJUSTABLE(fixP) tc_fix_adjustable (fixP)
 162 #else
 163 #define tc_fix_adjustable(FIXP)                                         \
 164   ((FIXP)->fx_bsr == 0                                                  \
 165    && ! S_IS_EXTERNAL ((FIXP)->fx_addsy)                                \
 166    && ! S_IS_WEAK ((FIXP)->fx_addsy))
 167 #endif
 168
 169 extern void brtab_emit PARAMS ((void));
 170 #define md_end()        brtab_emit ()
 171
 172 extern void reloc_callj ();
 173
 174 extern void tc_set_bal_of_call PARAMS ((symbolS *, symbolS *));
 175
 176 extern struct symbol *tc_get_bal_of_call PARAMS ((symbolS *));
 177
 178 extern void i960_handle_align ();
 179 #define HANDLE_ALIGN(FRAG)      i960_handle_align (FRAG)
 180 #define NEED_FX_R_TYPE
 181 #define NO_RELOC -1
 182
 183 #define md_operand(x)
 184
 185 extern const struct relax_type md_relax_table[];
 186 #define TC_GENERIC_RELAX_TABLE md_relax_table
 187
 188 #define LINKER_RELAXING_SHRINKS_ONLY
 189
 190 #define TC_FIX_TYPE struct { unsigned bsr : 1; }
 191 #define fx_bsr tc_fix_data.bsr
 192 #define TC_INIT_FIX_DATA(F)     ((F)->tc_fix_data.bsr = 0)
 193
 194 #endif