1 2007-09-19 Nick Clifton <nickc@redhat.com>
3 * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
6 2007-09-19 Bob Wilson <bob.wilson@acm.org>
8 * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
10 2007-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
12 * config/bfin-parse.y (asm_1): Slightly improve error messages
15 2007-09-18 Alan Modra <amodra@bigpond.net.au>
18 * read.c (emit_expr): Only use long long if required and available.
20 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
22 * config/tc-i386.c (baseindex): Removed.
23 (build_modrm_byte): Check reg_num for RIP register instead of
25 (i386_index_check): Likewise.
27 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
30 * config/obj-coff.c (obj_coff_endef): Remove checking size of
31 def_symbol_in_progress.
33 2007-09-17 Evandro Menezes <evandro@yahoo.com>
36 * read.c (emit_expr): Use unsigned long long values in warning
37 message about truncated expressions.
39 2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
41 * config/tc-i386.c (intel_e04): Revert the last change.
43 2007-09-17 Nick Clifton <nickc@redhat.com>
45 * po/es.po: Updated Spanish translation.
47 2007-09-15 H.J. Lu <hongjiu.lu@intel.com>
50 * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
53 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
55 * config/tc-i386.c (build_modrm_byte): Adjust comment line
58 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
60 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
63 2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
65 * config/tc-i386.c (build_modrm_byte): Adjust indentation.
67 2007-09-14 Michael Meissner <michael.meissner@amd.com>
68 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
69 Tony Linthicum <tony.linthicum@amd.com>
71 * NEWS: Add SSE5 support to NEWS file.
73 * config/tc-i386.h (drex_byte): Add fields to allow process_drex
74 and build_modrm_byte to communicate.
75 (DREX_OC0): New SSE5 macro.
76 (DREX_OC0_MASK): Ditto.
78 (DREX_OC1_MASK): Ditto.
79 (DREX_XMEM_X1_X2_X2): Ditto.
80 (DREX_X1_XMEM_X2_X2): Ditto.
81 (DREX_X1_XMEM_X2_X1: Ditto.
82 (DREX_X1_X2_XMEM_X1: Ditto.
83 (DREX_XMEM_X1_X2): Ditto.
84 (DREX_X1_XMEM_X2): Ditto.
85 (drex_byte): New structure to describe the DREX byte.
87 * config/tc-i386.c (process_drex): New function to handle SSE5
89 (build_modrm_byte): Use the information cached away in
90 process_drex in the case of DREX instructions.
91 (i386_insn): Add drex field.
92 (pi): Add debugging of drex field.
93 (md_assemble): Treat SSE5 like SSE3 in instructions with an
94 immediate byte. Move REX field to DREX if this is a DREX
96 (process_operands): Add SSE5 support.
97 (build_modrm_byte): Ditto.
100 (i386_align_code): Ditto.
102 2007-09-12 Jan Beulich <jbeulich@novell.com>
104 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
105 after generic operand swapping, and swap only the immediate operands.
107 2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
109 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
110 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
112 2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
114 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
117 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
119 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
120 (cpu_flags_check_cpu64): This. Inline.
121 (uints_all_zero): New.
122 (uints_set): Likewise
123 (uints_equal): Likewise
124 (UINTS_ALL_ZERO): Likewise
125 (UINTS_SET): Likewise
126 (UINTS_CLEAR): Likewise
127 (UINTS_EQUAL): Likewise
128 (cpu_flags_and): Likewise.
129 (cpu_flags_or): Likewise.
130 (operand_type_and): Likewise.
131 (operand_type_or): Likewise.
132 (operand_type_xor): Likewise.
133 (cpu_flags_not): Inline and use switch instead of loop.
134 (cpu_flags_match): Updated.
135 (operand_type_match): Likewise.
136 (smallest_imm_type): Likewise.
137 (set_cpu_arch): Likewise.
139 (md_assemble): Likewise.
140 (parse_insn): Likewise.
141 (optimize_imm): Likewise.
142 (match_template): Likewise.
143 (process_suffix): Likewise.
144 (update_imm): Likewise.
145 (finalize_imm): Likewise.
146 (process_operands): Likewise.
147 (build_modrm_byte): Likewise.
148 (i386_immediate): Likewise.
149 (i386_displacement): Likewise.
150 (i386_index_check): Likewise.
151 (i386_operand): Likewise.
152 (i386_target_format): Likewise.
153 (intel_e11): Likewise.
154 (operand_type): Remove implicitregister.
155 (operand_type_check): Updated. Inline.
156 (cpu_flags_all_zero): Removed.
157 (operand_type_all_zero): Likewise.
158 (i386_array_biop): Likewise.
159 (cpu_flags_biop): Likewise.
160 (operand_type_biop): Likewise.
162 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
164 * Makefile.am: Run "make dep-am".
165 * Makefile.in: Regenerate.
167 2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
169 * configure.in (AC_CHECK_HEADERS): Add limits.h.
170 * configure: Regenerated.
171 * config.in: Likewise.
173 * config/tc-i386.c: Include "opcodes/i386-init.h".
174 (_i386_insn): Use i386_operand_type for types.
175 (cpu_arch_flags): Updated to new types with bitfield.
176 (cpu_arch_tune_flags): Likewise.
177 (cpu_arch_isa_flags): Likewise.
178 (cpu_arch): Likewise.
179 (i386_align_code): Likewise.
180 (set_code_flag): Likewise.
181 (set_16bit_gcc_code_flag): Likewise.
182 (set_cpu_arch): Likewise.
183 (md_assemble): Likewise.
184 (parse_insn): Likewise.
185 (process_operands): Likewise.
186 (output_branch): Likewise.
187 (output_jump): Likewise.
188 (parse_real_register): Likewise.
189 (mode_from_disp_size): Likewise.
190 (smallest_imm_type): Likewise.
192 (type_names): Likewise.
195 (swap_2_operands): Likewise.
196 (optimize_imm): Likewise.
197 (optimize_disp): Likewise.
198 (match_template): Likewise.
199 (check_string): Likewise.
200 (process_suffix): Likewise.
201 (check_byte_reg): Likewise.
202 (check_long_reg): Likewise.
203 (check_qword_reg): Likewise.
204 (check_word_reg): Likewise.
205 (finalize_imm): Likewise.
206 (build_modrm_byte): Likewise.
207 (output_insn): Likewise.
208 (disp_size): Likewise.
209 (imm_size): Likewise.
210 (output_disp): Likewise.
211 (output_imm): Likewise.
213 (i386_immediate): Likewise.
214 (i386_displacement): Likewise.
215 (i386_index_check): Likewise.
216 (i386_operand): Likewise.
217 (parse_real_register): Likewise.
218 (i386_intel_operand): Likewise.
219 (intel_e09): Likewise.
220 (intel_bracket_expr): Likewise.
221 (intel_e11): Likewise.
222 (cpu_arch_flags_not): New.
223 (cpu_flags_check_x64): Likewise.
224 (cpu_flags_all_zero): Likewise.
225 (cpu_flags_not): Likewise.
226 (i386_cpu_flags_biop): Likewise.
227 (cpu_flags_biop): Likewise.
228 (cpu_flags_match); Likewise.
232 (reg16_inoutportreg): Likewise.
236 (disp16_32): Likewise.
238 (baseindex): Likewise.
246 (imm16_32): Likewise.
247 (imm16_32s): Likewise.
248 (imm16_32_32s): Likewise.
249 (operand_type): Likewise.
250 (operand_type_check): Likewise.
251 (operand_type_match): Likewise.
252 (operand_type_register_match): Likewise.
253 (update_imm): Likewise.
254 (set_code_flag): Also update cpu_arch_flags_not.
255 (set_16bit_gcc_code_flag): Likewise.
256 (md_begin): Likewise.
257 (parse_insn): Use cpu_flags_check_x64 to check 64bit support.
258 Use cpu_flags_match to match instructions.
259 (i386_target_format): Update cpu_arch_isa_flags and
260 cpu_arch_tune_flags to i386_cpu_flags type with bitfield.
261 (smallest_imm_type): Check cpu_arch_tune to tune for i486.
262 (match_template): Don't initialize overlap0, overlap1,
263 overlap2, overlap3 and operand_types.
264 (process_suffix): Handle crc32 with 64bit register.
266 (CONSISTENT_REGISTER_MATCH): Likewise.
268 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags
271 2007-09-06 H.J. Lu <hongjiu.lu@intel.com>
273 * config/tc-i386.c (match_template): Handle invlpga, vmload,
274 vmrun and vmsave in SVME.
275 (process_suffix): Likewise.
277 2007-09-05 H.J. Lu <hongjiu.lu@intel.com>
279 * config/tc-i386.c (i386_index_check): Don't use RegRex
280 on the reg_type field.
281 (parse_real_register): Use `||' instead of `|'.
283 2007-09-04 H.J. Lu <hongjiu.lu@intel.com>
285 * config/tc-i386.c (process_operands): Remove segment override
286 check on SVME instructions.
287 (i386_index_check): Remove memory operand check on SVME
290 2007-09-04 Alan Modra <amodra@bigpond.net.au>
292 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc".
293 (md_assemble): Update init of insn. Use insn.reloc instead of
294 calculating from flag.
295 (get_imm): Set reloc rather than flag.
296 (calcop): Formatting.
298 2007-08-29 Daniel Jacobowitz <dan@codesourcery.com>
300 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives.
302 2007-08-28 Daniel Jacobowitz <dan@codesourcery.com>
304 * doc/c-arc.texi: Fix typo.
306 2007-08-28 H.J. Lu <hongjiu.lu@intel.com>
308 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in
311 2007-08-28 Nathan Sidwell <nathan@codesourcery.com>
313 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers.
314 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2.
316 (m68k_cpus): Adjust 5407 entry.
318 2007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com>
320 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers.
321 (m68k_cpus): Define 51QE cpu.
323 2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
324 Joseph Myers <joseph@codesourcery.com>
326 * as.c (main): Flush stderr before printing listings to ensure
327 consistent output order across platforms.
329 2007-08-28 Robert Sebastian Gerus <arachnist@gmail.com>
331 * configure.tgt: Add support for i[3-7]86-*-dragonfly*.
333 2007-08-24 Joseph Myers <joseph@codesourcery.com>
334 Paul Brook <paul@codesourcery.com>
337 * as.h (remap_debug_filename, add_debug_prefix_map): Declare.
338 * as.c (show_usage): Document --debug-prefix-map option.
339 (parse_args): Handle --debug-prefix-map.
340 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths.
341 * stabs.c (stabs_generate_asm_file): Remap debug paths.
342 * Makefile.am (GAS_CFILES): Add remap.c
343 (GENERIC_OBJS): Add remap.o.
344 Regenerate dependencies.
345 * Makefile.in: Regenerate.
346 * doc/as.texinfo (--debug-prefix-map): Document.
348 2007-08-24 Aurelien Jarno <aurel32@debian.org>
350 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long
351 before printing them.
353 2007-08-24 Anders Waldenborg <anders@0x63.nu>
354 Alan Modra <amodra@bigpond.net.au>
356 * config/tc-i386.c (lex_got): Don't scan past a comma.
358 2007-08-23 Ben Elliston <bje@au.ibm.com>
360 * config/tc-ppc.c (parse_cpu): Handle "750cl".
361 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7".
362 (md_show_usage): Document -m750cl.
363 (md_assemble): Handle two delimiters in succession (eg. `),').
364 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl.
365 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests.
366 * testsuite/gas/ppc/ppc750ps.s: New file.
367 * testsuite/gas/ppc/ppc750ps.d: Likewise.
369 2007-08-23 Ben Elliston <bje@au.ibm.com>
371 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars.
373 2007-08-17 Alan Modra <amodra@bigpond.net.au>
376 * config/tc-i386.c (x86_cons): Complain about invalid @got etc.
378 (i386_immediate): Detect and complain about more cases of
379 invalid immediate expressions. Return failure rather than
380 converting them to zero.
381 (i386_displacement): Likewise.
383 2007-08-17 Alan Modra <amodra@bigpond.net.au>
385 * po/Make-in: Add --msgid-bugs-address to xgettext invocation.
387 2007-08-14 Andreas Schwab <schwab@suse.de>
389 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is
392 2007-08-12 Matthias Klose <doko@ubuntu.com>
394 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include
395 $(top_srcdir)/../../bfd/doc.
396 * doc/Makefile.in: Regenerate.
398 2007-08-10 Nick Clifton <nickc@redhat.com>
400 * NEWS: Add a marker for the 2.18 features.
402 2007-08-09 Paul Brook <paul@codesourcery.com>
404 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment.
406 2007-08-09 H.J. Lu <hongjiu.lu@intel.com>
408 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb.
410 2007-07-29 H.J. Lu <hongjiu.lu@intel.com>
412 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert
413 DWORD memory to Reg64 in Intel synax.
414 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to
415 Reg32 in Intel syntax.
417 2007-07-25 Sterling Augustine <sterling@tensilica.com>
419 * config/tc-xtensa.c (xtensa_extui_opcode): New.
420 (xg_expand_assembly_insn): Check for invalid extui operands.
421 (md_begin): Initialize xtensa_extui_opcode.
423 2007-07-24 Nick Clifton <nickc@redhat.com>
425 * config/tc-mep.h (skip_whitespace): Remove definition.
427 2007-07-23 H.J. Lu <hongjiu.lu@intel.com>
429 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386.
432 (f32_patt): Remove f32_15.
433 (f16_patt): Likewise.
434 (i386_align_code): Updated to alt_long_patt for 64bit by
437 * config/tc-i386.h (processor_type): Add PROCESSOR_I386.
439 2007-07-23 Evandro Menezes <evandro.menezes@amd.com>
441 * config/tc-i386.c (i386_align_code): Enable alignment up to
442 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment
445 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31.
447 2007-07-20 Nick Clifton <nickc@redhat.com>
449 * app.c (do_scrub_chars): Provide a one character buffer to hold a
450 pushed back newline at the end of an unterminated quoted string.
452 2007-07-14 Nick Clifton <nickc@redhat.com>
454 * config/tc-arm.c (create_register_alias): Return a boolean rather
456 Check the return value of insert_reg_alias and do not continue to
457 create aliases once an insertion has failed.
458 (s_unreq): Delete the all-upper-case and all-lower-case
459 alternatives as well.
461 2007-07-12 Kai Tietz <kai.tietz@onevision.com>
463 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma.
466 2007-07-11 Daniel Jacobowitz <dan@codesourcery.com>
468 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use
471 2007-07-04 Richard Sandiford <richard@codesourcery.com>
473 * config/tc-mips.c (mips_cpu_info_table): Add new entries for
474 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2.
475 Deprecate *x and *fx.
476 * doc/c-mips.texi: Document the new CPU arguments. Deprecate
479 2007-07-04 H.J. Lu <hongjiu.lu@intel.com>
481 * config/obj-coff.h (x86_64_target_format): Renamed to ...
482 (i386_target_format): This
483 (TARGET_FORMAT): Use i386_target_format.
485 * config/tc-i386.c (x86_64_target_format): Removed.
486 (i386_target_format): Handle PE formats.
488 2007-07-04 Nick Clifton <nickc@redhat.com>
490 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order
491 to get the right length of printed value.
493 2007-07-03 Nick Clifton <nickc@redhat.com>
495 * COPYING: Replace with GPLv3 text.
496 * app.c: Update copyright notice to refer to GPLv3.
497 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h,
498 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h,
499 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h,
500 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h,
501 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c,
502 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c,
503 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c,
504 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c,
505 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h,
506 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h,
507 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h,
508 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y,
509 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y,
510 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c,
511 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h,
512 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c,
513 config/obj-evax.h, config/obj-multi.h, config/obj-som.c,
514 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h,
515 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c,
516 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
517 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c,
518 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h,
519 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c,
520 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h,
521 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c,
522 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h,
523 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c,
524 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h,
525 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c,
526 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h,
527 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c,
528 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h,
529 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c,
530 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h,
531 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
532 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h,
533 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c,
534 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h,
535 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
536 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
537 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c,
538 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h,
539 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c,
540 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h,
541 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h,
542 config/tc-s390.c, config/tc-s390.h, config/tc-score.c,
543 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h,
544 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c,
545 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
546 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
547 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
548 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c,
549 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h,
550 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c,
551 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h,
552 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
553 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h,
554 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h,
555 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h,
556 config/xtensa-relax.c, config/xtensa-relax.h: Likewise.
558 * flonum-mult.c: Likewise, and also correct typo referring to
559 non-existant GNU Assembler General Public License.
560 * config/tc-m68851.h: Likewise.
561 * NEWS: Mention the new license. Also note where the 2.17 release
563 * config/e-crisaout.c: Add copyright header.
564 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c,
565 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c,
566 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h,
567 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h,
568 config/te-generic.h, config/te-gnu.h, config/te-go32.h,
569 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h,
570 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h,
571 config/te-linux.h, config/te-lnews.h, config/te-lynx.h,
572 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h,
573 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h,
574 config/te-pep.h, config/te-psos.h, config/te-riscix.h,
575 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h,
576 config/te-wince-pe.h: Likewise.
578 2007-07-03 Nathan Sidwell <nathan@codesourcery.com>
580 * config/tc-m68k.c (m68k_ip): Add j & K operand types.
581 (install_operand): Add E encoding.
582 (md_begin): Check and skip initial '.' arg character.
583 (get_num): Add 0..511 case.
585 2007-07-03 Alan Modra <amodra@bigpond.net.au>
588 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF.
589 * config/obj-elf.h (obj_ecoff_set_ext): Comment.
591 2007-07-03 Mikkel Lauritsen <renard@nospam.dk>
594 * app.c (do_scrub_chars <state 5>): Check for output buffer full
597 2007-07-02 Joseph Myers <joseph@codesourcery.com>
599 * config/tc-mips.c (s_dtprelword, s_dtpreldword,
600 s_dtprel_internal): New.
601 (mips_pseudo_table): Add .dtprelword and .dtpreldword.
602 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and
603 BFD_RELOC_MIPS_TLS_DTPREL64.
605 2007-07-02 Alan Modra <amodra@bigpond.net.au>
607 * Makefile.am: Run "make dep-am".
608 * Makefile.in: Regenerate.
609 * aclocal.m4: Regenerate.
610 * config.in: Regenerate.
611 * doc/Makefile.in: Regenerate.
612 * po/POTFILES.in: Regenerate.
613 * po/gas.pot: Regenerate.
615 2007-07-02 Alan Modra <amodra@bigpond.net.au>
617 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning
618 coff section flag values to bfd section flag.
620 2007-06-30 H.J. Lu <hongjiu.lu@intel.com>
622 * aclocal.m4: Regenerated.
623 * doc/Makefile.in: Likewise.
624 * Makefile.in: Likewise.
626 2007-06-29 Joseph Myers <joseph@codesourcery.com>
628 * as.c (main): Only call create_obj_attrs_section if IS_ELF.
630 2007-06-29 Joseph Myers <joseph@codesourcery.com>
632 * as.c (create_obj_attrs_section): New.
633 (main): Call create_obj_attrs_section for ELF.
634 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char,
635 skip_past_comma, s_vendor_attribute): New.
636 (potable): Add gnu_attribute for ELF.
637 * read.h (s_vendor_attribute): Declare.
638 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper
639 round s_vendor_attribute.
640 (aeabi_set_public_attributes): Update for new attributes
642 (arm_md_end): Remove attributes contents setting now done
645 2007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com>
647 * Makefile.am: Add CR16 related entry.
648 * Makefile.in: Regenerate.
649 * config/tc-cr16.h: New file
650 * config/tc-cr16.c: New file
651 * doc/c-cr16.texi: New file for cr16
652 * doc/all.texi: Entry for cr16
653 * doc/Makefile.am: Added c-cr16.texi
654 * doc/Makefile.in: Regenerate
655 * doc/as.texinfo: Entry for CR16 target
656 * NEWS: Announce the support for the new target.
658 2007-06-26 Paul Brook <paul@codesourcery.com>
660 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs
662 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1.
664 2007-06-25 H.J. Lu <hongjiu.lu@intel.com>
666 * config/tc-i386.c (process_operands): Replace regKludge
669 2007-06-25 Richard Sandiford <richard@codesourcery.com>
671 * config/tc-mips.h (TC_SYMFIELD_TYPE): New.
672 * config/tc-mips.c (append_insn): Record which symbols have
673 R_MIPS16_26 relocations against them.
674 (mips_fix_adjustable): Don't reduce relocations against such symbols.
676 2007-06-22 Sterling Augustine <sterling@tensilica.com>
678 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules.
679 (frag_format_size): Handle RELAX_IMMED_STEP3.
680 (xtensa_relax_frag, md_convert_frag): Likewise.
681 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3.
682 (RELAX_IMMED_MAXSTEPS): Adjust.
683 * config/xtensa-relax.c (widen_spec_list): Add transitions from
684 wide branches to branch-over-jumps.
685 (build_transition): Handle wide branches in transition patterns.
687 2007-06-22 H.J. Lu <hongjiu.lu@intel.com>
689 * config/tc-i386.c (disp_size): New.
690 (imm_size): Likewise.
691 (output_disp): Use disp_size and imm_size.
692 (output_imm): Use imm_size.
694 2007-06-19 Sterling Augustine <sterling@tensilica.com>
696 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about
697 use of literal_frag field.
698 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag
699 in the literal_frag field.
700 (xtensa_move_literals): Use it here instead of searching. Update
701 literal_frag field with new value.
703 2007-06-14 Paul Brook <paul@codesourcery.com>
705 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and
706 narrow shift by immediate.
708 2007-06-14 H.J. Lu <hongjiu.lu@intel.com>
710 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd.
712 * acinclude.m4: Don't include m4 files.
713 (BFD_BINARY_FOPEN): Removed.
714 Remove libtool kludge.
716 * Makefile.in: Regenerated.
717 * doc/Makefile.in: Likewise.
718 * aclocal.m4: Likewise.
719 * configure: Likewise.
721 2007-06-11 Sterling Augustine <sterling@tensilica.com>
722 Bob Wilson <bob.wilson@acm.org>
724 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to...
725 (XTENSA_PROP_NO_TRANSFORM): ...this.
726 (frag_flags_struct): Move is_no_transform out of the insn sub-struct.
727 (xtensa_mark_frags_for_org): New.
728 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org.
729 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org.
730 (get_frag_property_flags): Adjust reference to is_no_transform flag.
731 (xtensa_frag_flags_combinable): Likewise.
732 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM.
733 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG.
735 2007-06-06 Paul Brook <paul@codesourcery.com>
737 * config/tc-arm.c (s_align): Pad code sections appropriately.
739 2007-06-05 Paul Brook <paul@codesourcery.com>
741 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes.
743 2007-06-05 Nick Clifton <nickc@redhat.com>
746 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array.
748 2007-06-05 Alan Modra <amodra@bigpond.net.au>
750 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle
752 (tc_gen_reloc): Abort if neither addsy or subsy is set.
753 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs.
754 * config/tc-spu.h (md_operand): Handle @ppu without sym.
756 2007-05-31 Paul Brook <paul@codesourcery.com>
758 * config/tc-arm.c (insns): Allow strex on M profile cores.
760 2007-05-29 David S. Miller <davem@davemloft.net>
761 Jakub Jelinek <jakub@redhat.com>
764 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks
765 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19.
767 2007-05-29 Alan Modra <amodra@bigpond.net.au>
769 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros.
771 2007-05-29 Alan Modra <amodra@bigpond.net.au>
773 * config/tc-ppc.c: Convert to ISO C.
774 * config/tc-ppc.c: Likewise.
776 2007-05-29 Alan Modra <amodra@bigpond.net.au>
778 * write.h (EXEC_MACHINE_TYPE): Delete.
779 (string_byte_count, section_alignment): Delete.
781 2007-05-28 Nathan Sidwell <nathan@codesourcery.com>
783 * app.c (do_scrub_chars): Cope with \ at end of buffer.
785 2007-05-26 Alan Modra <amodra@bigpond.net.au>
787 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in
788 top 32 bits of 64 bit value if so doing results in passing
789 range check. Rewrite sign extension fudges similarly. Enable
790 fudges for powerpc64 too. Report user value if range check
791 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE
792 range rather than value, also to report user value on failure.
794 2007-03-25 Paul Brook <paul@codesourcery.com>
796 * config/tc-arm.c (T2_SUBS_PC_LR): Define.
797 (do_t_add_sub): Correctly encode subs pc, lr, #const.
798 (do_t_mov_cmp): Correctly encode movs pc, lr.
800 2007-05-24 Steve Ellcey <sje@cup.hp.com>
802 * Makefile.in: Regnerate.
803 * configure: Regenerate.
804 * aclocal.m4: Regenerate.
805 * doc/Makefile.in: Regenerate.
807 2007-05-22 Bob Wilson <bob.wilson@acm.org>
809 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements
810 and index entries about automatic alignment of ENTRY instructions.
812 2007-05-22 Nick Clifton <nickc@redhat.com>
814 * doc/as.texinfo: Use @copying around the copyright notice.
816 2007-05-18 Joseph Myers <joseph@codesourcery.com>
818 * config/tc-mips.c (s_mipsset): Use generic s_set for directives
821 2007-05-17 H.J. Lu <hongjiu.lu@intel.com>
824 2003-06-05 Michal Ludvig <mludvig@suse.cz>
825 * doc/as.texinfo: Document new directives: .cfi_restore,
826 .cfi_undefined, .cfi_same_value, .cfi_return_column,
827 .cfi_remember_state and .cfi_restore_state.
829 2007-05-17 Nathan Sidwell <nathan@codesourcery.com>
831 * config/tc-m68k.c (md_apply_fix): Show value of out of range
832 fixups in error message.
833 (md_conver_frag_1): Propagate the fix source location and use
834 as_bad_where rather than fatal, for better error messages.
836 2007-05-16 Paul Brook <paul@codesourcery.com>
838 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr.
840 2007-05-15 Mark Shinwell <shinwell@codesourcery.com>
842 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables.
844 2007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr>
847 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct
848 addend is stored for relocs against weak symbols.
849 (md_apply_fix): So not loose track of addend for relocs against
852 2007-05-14 Thiemo Seufer <ths@mips.com>
854 * config/tc-mips.c (md_parse_option): Fix parsing of -O option.
856 2007-05-14 Mei Ligang <ligang@sunnorth.com.cn>
858 * config/tc-score.c (data_op2, validate_immediate): Fix bug for
859 addri, addri.c, subi, and subi.c when immediate number is hex.
860 (score_insns): Remove subis and subis.c.
861 (do_sub_rdi16): Delete.
863 2007-05-11 Alan Modra <amodra@bigpond.net.au>
865 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call
867 (md_assemble): Tidy use of insn.flag.
868 (get_imm): Likewise. Handle uppercase input too.
869 (spu_cons): New function.
870 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs.
871 (TC_FORCE_RELOCATION): Don't resolve them either.
873 2007-05-05 Mark Shinwell <shinwell@codesourcery.com>
875 * config/tc-arm.c (md_apply_fix): Generate more accurate
876 diagnostic when 8-bit immediate range is exceeded for
877 BFD_RELOC_ARM_OFFSET_IMM8.
879 2007-05-04 Alan Modra <amodra@bigpond.net.au>
882 * config/tc-i386.c (lex_got): Don't replace the reloc token with
883 a space if we already have a space.
885 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
887 * config/tc-i386.c (match_template): Don't explicitly check
888 suffix for crc32 in Intel mode.
889 (process_suffix): Issue an error for crc32 if the operand size
892 2007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr>
893 Nick Clifton <nickc@redhat.com>
896 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols.
897 (tc_gen_reloc): Adjust the addend of relocs against weak symbols.
898 (md_apply_fix): Put zero values into the frags referencing weak
901 2007-05-02 Alan Modra <amodra@bigpond.net.au>
904 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for
907 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
909 * config/tc-i386.c (match_template): Check suffix for crc32 in
911 (process_suffix): Default the suffix of 8bit crc32 to
913 (check_byte_reg): Skip check for 8bit crc32.
915 2007-04-30 H.J. Lu <hongjiu.lu@intel.com>
917 * config/tc-i386.c (md_assemble): Use register_prefix in
918 error/warning message.
919 (check_byte_reg): Likewise.
920 (check_long_reg): Likewise.
921 (check_qword_reg): Likewise.
922 (check_word_reg): Likewise.
923 (process_operands): Likewise.
925 2007-04-30 Alan Modra <amodra@bigpond.net.au>
928 * config/tc-ppc.c (ppc_insert_operand): Disable range check if
931 2007-04-28 Thiemo Seufer <ths@networkno.de>
933 * config/tc-mips.c: Fix comment.
935 2007-04-26 Anatoly Sokolov <aesok@post.ru>
937 * config/tc-avr.c (mcu_types): Add support for atmega8hva and
938 atmega16hva devices. Move at90usb82 device to 'avr5' architecture.
939 * doc/c-avr.texi: Document new devices.
941 2007-04-24 Alan Modra <amodra@bigpond.net.au>
943 * Makefile.am: Run "make dep-am".
944 * Makefile.in: Regenerate.
946 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
948 * config/tc-m68k.c (mcf54455_ctrl): New.
949 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New.
950 (m68k_archs): Add isac.
951 (m68k_cpus): Add 54455 family.
952 (m68k_ip): Split Bg into Bb, Bs, Bg.
953 (m68k_elf_final_processing): Add ISA_C.
954 * doc/c-m68k.texi (M680x0 Options): Add isac.
956 2007-04-22 Alan Modra <amodra@bigpond.net.au>
958 * read.c (read_a_source_file): Skip multiple spaces to
959 cover hack in mmix md_start_line_hook which overwrites a
960 colon with a space. Delete sermon and needless assertion.
962 2007-04-21 Alan Modra <amodra@bigpond.net.au>
964 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned.
965 (md_atof): Make number_of_chars unsigned. Revert last change.
966 * config/tc-or32.c (md_apply_fix): Delete bogus assertions.
967 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF.
968 * config/tc-sh.h (md_optimize_expr): Likewise.
969 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus
971 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise.
973 2007-04-21 Nick Clifton <nickc@redhat.com>
975 * config/atof-vax.c (md_atof): Fix comparison inside know().
977 * config/tc-ia64.c (emit_one_bundle): Fix typo.
979 2007-04-21 Alan Modra <amodra@bigpond.net.au>
981 * expr.c (expr): Assert on rankarg, not rank which can be unsigned.
982 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion.
983 Don't skip over NUL char.
984 (pseudo_set): Set X_op for registers to O_register.
985 * symbols.c (symbol_clone): Remove assertion that sym is defined.
986 (resolve_symbol_value): Resolve O_register symbols.
987 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab.
988 Instead find st(0) by hash lookup.
989 * config/tc-ppc.c (ppc_macro): Warning fix.
991 * as.h (ENABLE_CHECKING): Default define to 0.
992 (know): Assert if ENABLE_CHECKING.
993 (struct relax_type): Remove superfluous declaration.
994 * configure.in (--enable-checking): New.
995 * configure: Regenerate.
996 * config.in: Regenerate.
997 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING.
998 Check for duplicate powerpc_operands entries.
1000 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
1002 * config/tc-m68k.c (mcf5253_ctrl): New.
1003 (mcf52223_ctrl): New.
1004 (m68k_cpus): Add 5253, 52221, 52223.
1006 * config/m68k-parse.h (RAMBAR_ALT): New.
1007 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New.
1008 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl,
1009 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl,
1010 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl,
1011 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for
1013 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT.
1014 (m68k_cpus): Adjust 5206, 5206e & 5307 entries.
1015 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it
1016 to control register mapping.
1018 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1020 * messages.c (as_internal_value_out_of_range): Fix typo in
1021 error message. Return after printing domain error.
1022 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits
1023 in max when shifting right.
1025 2007-04-20 Alan Modra <amodra@bigpond.net.au>
1027 * messages.c (as_internal_value_out_of_range): Extend to report
1028 errors for values with invalid low bits set.
1029 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm
1030 fields. Check that operands and opcode fields are disjoint.
1031 (ppc_insert_operand): Check operands using mask rather than bit
1032 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust
1034 (md_apply_fix): Adjust for struct powerpc_operand change.
1036 2007-04-19 Paul Brook <paul@codesourcery.com>
1038 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on
1039 Thumb-1. Add sanity check for bogus relaxations.
1041 2007-04-19 Paul Brook <paul@codesourcery.com>
1043 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1.
1045 2007-04-19 Alan Modra <amodra@bigpond.net.au>
1047 * Makefile.am: Run "make dep-am".
1048 * Makefile.in: Regenerate.
1050 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
1052 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe.
1054 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1056 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4.
1058 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1060 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4.
1061 (match_template): Handle operand size for crc32 in SSE4.2.
1062 (process_suffix): Handle operand type for crc32 in SSE4.2.
1063 (output_insn): Support SSE4.2.
1065 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
1067 * config/tc-i386.c (cpu_arch): Add .sse4.1.
1068 (process_operands): Adjust implicit operand for blendvpd,
1069 blendvps and pblendvb in SSE4.1.
1070 (output_insn): Support SSE4.1.
1072 2007-04-18 Paul Brook <paul@codesourcery.com>
1074 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible.
1076 2007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1078 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead
1079 of as_warn_where for misaligned data.
1081 2007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1083 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle
1086 2007-04-14 Steve Ellcey <sje@cup.hp.com>
1088 * Makefile.am: Add ACLOCAL_AMFLAGS.
1089 * Makefile.in: Regenerate.
1091 2007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1093 * config/tc-sh.c (align_test_frag_offset_fixed_p): New.
1094 (sh_optimize_expr): Likewise.
1095 * config/tc-sh.h (md_optimize_expr): Define.
1096 (sh_optimize_expr): Prototype.
1098 2007-04-06 Matt Thomas <matt@netbsd.org>
1100 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp)
1101 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed
1102 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise.
1104 2007-04-04 Kazu Hirata <kazu@codesourcery.com>
1106 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a.
1108 2007-04-04 Paul Brook <paul@codesourcery.com>
1110 * config/tc-arm.c (do_neon_ext): Enforce immediate range.
1111 (insns): Use I15 for vext.
1113 2007-04-04 Paul Brook <paul@codesourcery.com>
1115 * configure.tgt: Loosen checks for arm uclinux eabi targets.
1117 2007-04-02 Sterling Augustine <sterling@tensilica.com>
1119 * config/tc-xtensa.c (xtensa_flush_pending_output): Check
1120 outputting_stabs_line_debug.
1122 2007-03-26 Anatoly Sokolov <aesok@post.ru>
1124 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82,
1125 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p
1127 * doc/c-avr.texi: Document new devices.
1129 2007-04-02 Richard Sandiford <richard@codesourcery.com>
1131 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options.
1132 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document.
1133 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic.
1135 2007-03-30 Sterling Augustine <sterling@tensilica.com>
1136 Bob Wilson <bob.wilson@acm.org>
1138 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument.
1139 Do not check is_loop_target flag.
1140 (xtensa_frob_label): Adjust calls to xtensa_move_labels.
1141 (xg_assemble_vliw_tokens): Likewise. Also avoid calling
1142 xtensa_move_labels for alignment of loop opcodes.
1144 2007-03-30 H.J. Lu <hongjiu.lu@intel.com>
1146 * config/tc-i386.c (process_suffix): Reindent a bit.
1148 2007-03-30 Paul Brook <paul@codesourcery.com>
1150 * config/tc-arm.c (encode_thumb2_ldmstm): New function.
1151 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm.
1152 (do_t_push_pop): Use encode_thumb2_ldmstm.
1154 2007-03-29 DJ Delorie <dj@redhat.com>
1156 * config/tc-m32c.c (rl_for, relaxable): Protect argument.
1157 (md_relax_table): Add entries for ADJNZ macros.
1158 (M32C_Macros): Add ADJNZ macros.
1159 (subtype_mappings): Add entries for ADJNZ macros.
1160 (insn_to_subtype): Check for adjnz and sbjnz insns.
1161 (md_estimate_size_before_relax): Pass insn to insn_to_subtype.
1162 (md_convert_frag): Convert adjnz and sbjnz.
1164 2007-03-29 Nick Clifton <nickc@redhat.com>
1166 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long
1168 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field
1169 using ITBL_NUMBER_OF_PROCESSORS.
1170 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS.
1172 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
1174 * config/tc-i386.c (build_modrm_byte): For instructions with 2
1175 register operands, encode destination in i.rm.regmem if its
1178 2007-03-28 Richard Sandiford <richard@codesourcery.com>
1179 Phil Edwards <phil@codesourcery.com>
1181 * doc/as.texinfo: Put the contents after the title page rather
1182 than at the end of the document.
1184 2007-03-27 Alan Modra <amodra@bigpond.net.au>
1186 * NEWS: Mention ".reloc".
1188 2007-03-26 Sterling Augustine <sterling@tensilica.com>
1190 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms
1191 in FLIX instructions.
1193 2007-03-26 Julian Brown <julian@codesourcery.com>
1195 * config/tc-arm.c (arm_it): Add immisfloat field.
1196 (parse_qfloat_immediate): Disallow integer syntax for floating-point
1197 immediates. Fix hex immediates, handle 0.0 and -0.0 specially.
1198 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a
1200 (neon_cmode_for_move_imm): Reject non-float immediates for float
1202 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm.
1204 2007-03-26 Julian Brown <julian@codesourcery.com>
1206 * doc/c-arm.texi: Add documentation for .dn/.qn directives.
1208 2007-03-26 Alan Modra <amodra@bigpond.net.au>
1210 * doc/as.texinfo (Reloc): Document.
1211 * read.c (potable): Add "reloc".
1212 (s_reloc): New function.
1213 * write.c (reloc_list): New global var.
1214 (resolve_reloc_expr_symbols): New function.
1215 (write_object_file): Call it.
1216 (write_relocs): Process reloc_list.
1217 * write.h (struct reloc_list): New.
1218 (reloc_list): Declare.
1220 2007-03-24 Paul Brook <paul@codesourcery.com>
1222 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes.
1224 2007-03-24 Paul Brook <paul@codesourcery.com>
1225 Mark Shinwell <shinwell@codesourcery.com>
1227 * config/tc-arm.c (operand_parse_code): Add OP_oRRw.
1228 (parse_operands): Don't expect comma if first operand missing.
1230 (do_srs): Encode register number, checking it is r13. Update comment.
1231 (insns): Update SRS entries to take a register.
1233 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
1235 * config/tc-i386.c (md_begin): Allow '.' in mnemonic.
1237 2007-03-23 Mark Shinwell <shinwell@codesourcery.com>
1239 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that
1240 attempt to jump to the next instruction into NOPs.
1242 2007-03-23 Alan Modra <amodra@bigpond.net.au>
1244 * config/tc-spu.c: Don't include opcode/spu.h.
1245 (md_assemble): Set tc_fix_data.insn_tag and arg_format.
1246 (md_apply_fix): Adjust.
1247 * config/tc-spu.h: Include opcode/spu.h.
1248 (struct tc_fix_info): New.
1249 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust.
1250 (TC_FORCE_RELOCATION): Define.
1252 2007-03-22 Joseph Myers <joseph@codesourcery.com>
1254 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version.
1256 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1258 * config/tc-i386.c (process_suffix): Check 0x90 instead of
1259 xchg for xchg %rax,%rax.
1261 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1263 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY
1264 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively.
1266 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1269 * config/tc-i386.c (match_template): Properly handle 64bit mode
1272 2007-03-21 Anton Ertl <anton@mips.complang.tuw>
1275 * config/tc-alpha.c (emit_ustX): Fix ustq code generation.
1277 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
1279 * Makefile.am: Run dep-am.
1280 * Makefile.in: Regenerated.
1282 * config/tc-i386.c: Don't include "opcodes/i386-opc.h".
1284 * config/tc-i386.h: Include "opcodes/i386-opc.h".
1285 (NOP_OPCODE): Removed.
1286 (template): Likewise.
1288 2007-03-21 Andreas Schwab <schwab@suse.de>
1290 * config/tc-i386.h (NOP_OPCODE): Restore.
1292 2007-03-18 Mark Shinwell <shinwell@codesourcery.com>
1294 * config/tc-arm.c (do_mul): Don't warn about overlapping
1295 Rd and Rm operands when assembling for v6 or above.
1296 Correctly capitalize register names in the messages.
1297 (do_mlas): Likewise. Delete spurious blank line.
1299 2007-03-16 Kazu Hirata <kazu@codesourcery.com>
1301 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa.
1303 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1305 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan
1307 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE
1310 2007-03-15 Alexandre Oliva <aoliva@redhat.com>
1313 * app.c (do_scrub_chars): PUT after setting states.
1315 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1317 * Makefile.am: Run "make dep-am".
1318 * Makefile.in: Regenerated.
1320 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of
1322 (md_begin): Check reg_name != NULL for the last entry in
1325 * config/tc-i386.h: Move many entries to opcode/i386.h and
1328 * configure.in (need_opcodes): Set true for i386.
1329 * configure: Regenerated.
1331 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
1333 * Makefile.am (REPORT_BUGS_TO): Removed.
1334 (INCLUDES): Remove -DREPORT_BUGS_TO.
1335 * Makefile.in: Regenerated.
1337 * configure.in (--with-bugurl): Removed.
1338 * configure: Regenerated.
1340 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi.
1341 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc.
1342 (TEXI2DVI): Likewise.
1343 (gasver.texi): Removed.
1344 (MOSTLYCLEANFILES): Remove gasver.texi.
1345 (as.1): Don't depend on gasver.texi.
1346 * doc/Makefile.in: Regenerated.
1348 * doc/as.texi: Include bfdver.texi instead of gasver.texi.
1350 2007-03-14 Daniel Jacobowitz <dan@codesourcery.com>
1352 * config/tc-arm.c (arm_copy_symbol_attributes): New.
1353 * config/tc-arm.h (arm_copy_symbol_attributes): Declare.
1354 (TC_COPY_SYMBOL_ATTRIBUTES): Define.
1355 * gas/symbols.c (copy_symbol_attributes): Use
1356 TC_COPY_SYMBOL_ATTRIBUTES.
1358 2007-03-14 Paul Brook <paul@codesourcery.com>
1360 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding.
1362 2007-03-14 Alan Modra <amodra@bigpond.net.au>
1365 * write.c (relax_segment): Insert extra alignment padding
1366 to break infinite relax loop when given impossible
1367 gcc_except_table assembly.
1369 2007-03-12 H.J. Lu <hongjiu.lu@intel.com>
1371 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX
1372 on i.tm.base_opcode.
1373 (match_template): Likewise.
1374 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32.
1376 * config/tc-i386.h (Opcode_D): New.
1377 (Opcode_FloatR): Likewise.
1378 (Opcode_FloatD): Likewise.
1381 (FloatMF): Likewise.
1385 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1387 * app.c (do_scrub_chars): Recognize comments after # line "file".
1388 * read.c (get_linefile_number): New.
1389 (s_app_line): Accept ill-formed .linefile lines as comments.
1391 2007-03-09 Alan Modra <amodra@bigpond.net.au>
1393 * config/tc-i386.h (WORKING_DOT_WORD): Define.
1395 2007-03-09 Alexandre Oliva <aoliva@redhat.com>
1397 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile.
1398 * as.h (new_logical_line_flags): New.
1399 * input-scrub.c (new_logical_line): Turned into wrapper for...
1400 (new_logical_line_flags): this. Handle flags.
1401 * read.c (potable): Add linefile. Adjust appline argument.
1402 (s_app_file): Fake .appfiles no more.
1403 (s_app_line): For .linefile, accept file name and flags.
1405 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1407 * symbols.c (symbol_relc_make_sym): Comment typo fixes.
1409 2007-03-08 Alan Modra <amodra@bigpond.net.au>
1411 * Makefile.am: Run "make dep-am".
1412 * Makefile.in: Regenerate.
1413 * po/POTFILES.in: Regenerate.
1415 2007-03-07 Joseph Myers <joseph@codesourcery.com>
1417 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of
1419 * doc/Makefile.am (gasver.texi): Define BUGURL.
1420 * doc/as.texinfo: Use BUGURL.
1421 * Makefile.in, configure, doc/Makefile.in: Regenerate.
1423 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
1425 * config/tc-s390.c (md_parse_option): z9-ec option added.
1427 2007-03-02 Paul Brook <paul@codesourcery.com>
1429 * config/tc-arm.c (relax_immediate): Always return positive values.
1430 (relaxed_symbol_addr): New function.
1431 (relax_adr, relax_branch): Use it.
1432 (arm_relax_frag): Pass strect argument. Adjust infinite loop check.
1434 2007-03-01 Joseph Myers <joseph@codesourcery.com>
1436 * as.c (parse_args): Update copyright date.
1438 2007-02-28 Nathan Sidwell <nathan@codesourcery.com>
1440 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf.
1442 2007-02-28 Nick Clifton <nickc@redhat.com>
1445 * config/tc-d10v.c (do_assemble): Do not generate error messages,
1446 just return -1 whenever a problem is encountered.
1447 (md_assemble): If do_assemble returns -1 generate a non-fatal
1448 error message and return.
1451 * config/tc-msp430.c (line_separator_char): Change to '{'.
1453 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1455 * config/tc-m68hc11.c (fixup24): Correct fixup size.
1456 (build_jump_insn): Likewise.
1457 (build_insn): Likewise.
1458 (s_m68hc11_relax): Likewise.
1460 2007-02-27 Alan Modra <amodra@bigpond.net.au>
1462 * config/obj-elf.c (elf_frob_file): frag_wane any new frags.
1464 2007-02-25 Mark Shinwell <shinwell@codesourcery.com>
1466 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad.
1468 2007-02-23 Alan Modra <amodra@bigpond.net.au>
1470 * config/tc-mn10300.c (md_convert_frag): Correct fixup size.
1471 (md_assemble): Likewise.
1473 2007-02-22 Alan Modra <amodra@bigpond.net.au>
1475 * write.c (size_seg): Always clear SEC_RELOC here.
1476 (install_reloc): New function, extracted from..
1477 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code
1478 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when
1479 testing frag size. Set SEC_RELOC here.
1481 2007-02-21 Alan Modra <amodra@bigpond.net.au>
1484 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define.
1486 2007-02-20 Thiemo Seufer <ths@mips.com>
1488 * doc/c-mips.texi: Document 74kc, 74kf, 74kx.
1490 2007-02-20 Thiemo Seufer <ths@mips.com>
1492 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations.
1494 2007-02-20 Thiemo Seufer <ths@mips.com>
1495 Chao-Ying Fu <fu@mips.com>
1497 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2,
1498 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support.
1499 (macro_build): Add case '2'.
1500 (macro): Expand M_BALIGN to nop, packrl.ph or balign.
1501 (validate_mips_insn): Add support for balign instruction.
1502 (mips_ip): Handle DSP R2 instructions. Support balign instruction.
1503 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE,
1504 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2
1505 command line options.
1506 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives.
1507 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output.
1508 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2,
1509 .set dspr2, .set nodspr2.
1511 2007-02-20 Nathan Sidwell <nathan@codesourcery.com>
1513 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New.
1514 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225.
1516 2007-02-18 Alan Modra <amodra@bigpond.net.au>
1518 * write.c (TC_FX_SIZE_SLACK): Define.
1519 (write_relocs): Reinstate check for fixup within frag.
1520 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define.
1521 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define.
1522 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define.
1523 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define.
1524 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define.
1526 2007-02-17 Mark Mitchell <mark@codesourcery.com>
1527 Nathan Sidwell <nathan@codesourcery.com>
1528 Vladimir Prus <vladimir@codesourcery.com
1529 Joseph Myers <joseph@codesourcery.com>
1531 * configure.in (--with-bugurl): New option.
1532 * configure: Regenerate.
1533 * dep-in.sed: Remove bin-bugs.h.
1534 * Makefile.am (REPORT_BUGS_TO): Define.
1535 (INCLUDES): Define REPORT_BUGS_TO.
1536 (DEP_INCLUDES): Likewise.
1537 ($(OBJS)): No longer depend on bin-bugs.h.
1538 * Makefile.in: Regenerate.
1539 * doc/Makefile.in: Regenerate.
1540 * as.c (show_usage): Don't print empty REPORT_BUGS_TO.
1541 * as.h: Remove include of bin-bugs.h.
1543 2007-02-17 Alan Modra <amodra@bigpond.net.au>
1545 * write.c: White space fixes.
1546 (fixup_segment): Move symbol_mri_common_p adjustments..
1547 (write_relocs): ..and symbol_equated_reloc_p adjustments..
1548 (adjust_reloc_syms): ..to here.
1550 2007-02-16 Alan Modra <amodra@bigpond.net.au>
1552 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than
1553 xmalloc, memset. Don't bother assigning NULL to known zero mem.
1554 (subseg_set_rest): Remove unnecessary cast.
1555 * write.c: Include libbfd.h. Replace PTR with void * throughout.
1556 Remove unnecessary forward declarations and casts.
1557 (set_symtab): Delete extern bfd_alloc.
1558 (fixup_segment): Move.
1560 2007-02-15 Nathan Sidwell <nathan@codesourcery.com>
1562 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID.
1563 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names.
1564 (mcf5475_ctrl, mcf5485_ctrl): New.
1565 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families.
1566 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling.
1567 (init_table): Add asid, mmubar, adjust rombar0.
1569 2007-02-14 Alan Modra <amodra@bigpond.net.au>
1571 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete.
1572 * config/tc-i386.c: Wrap overly long lines, whitespace fixes.
1573 (process_operands): Move old Seg2ShortForm and Seg3ShortForm
1574 code, and test for these insns using a combination of
1575 opcode_modifier and operand_types.
1577 2007-02-07 Paul Brook <paul@codesourcery.com>
1579 * configure.tgt: Add arm*-*-uclinux-*eabi.
1581 2007-02-05 Dave Brolley <brolley@redhat.com>
1582 Richard Sandiford <rsandifo@redhat.com>
1583 DJ Delorie <dj@redhat.com>
1584 Stan Cox <scox@redhat.com>
1585 Jim Blandy <jimb@redhat.com>
1586 Nick Clifton <nickc@redhat.com>
1587 Jim Wilson <wilson@redhat.com>
1588 Frank Ch. Eigler <fche@redhat.com>
1589 Graydon Hoare <graydon@redhat.com>
1590 Ben Elliston <bje@redhat.com>
1591 John Healy <jhealy@redhat.com>
1592 Richard Henderson <rth@redhat.com>
1594 * Makefile.am (CPU_TYPES): Add mep.
1595 (TARGET_CPU_CFILES): Add tc-mep.c.
1596 (TARGET_CPU_HFILES): Add tc-mep.h.
1597 (DEPTC_mep_elf): New variable.
1598 (DEPTC_mep_coff): Likewise.
1599 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise.
1600 * configure.in: Support mep.
1601 * configure.tgt: Likewise.
1602 * config/tc-mep.c: New file.
1603 * config/obj-elf.c: New file.
1604 * config/tc-mep.c: New file.
1605 * config/tc-mep.h: New file.
1606 * testsuite/gas/mep: New testsuite with content.
1607 * Makefile.in: Regenerate.
1608 * configure: Regenerate.
1610 2007-02-05 Dave Brolley <brolley@redhat.com>
1612 * cgen.c (gas_cgen_install_complex_reloc): Removed.
1613 (complex_reloc_installation_howto): Removed.
1615 2007-02-05 Dave Brolley <brolley@redhat.com>
1616 Graydon Hoare <graydon@redhat.com>
1617 DJ Delorie <dj@redhat.com>
1618 Catherine Moore <clm@redhat.com>
1619 Michael Chastain <chastain@redhat.com>
1620 Frank Ch. Eigler <fche@redhat.com>
1622 * symbols.c (use_complex_relocs_for): New, to decide
1623 when to use complex relocs. Add signed RELC support.
1624 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally
1625 encode expression symbols as mangled complex relocation symbols (when
1626 compiled with -DOBJ_COMPLEX_RELOC).
1627 (symbol_relc_make_sym,value,expr): New traversal/conversion routines.
1628 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call
1629 encode_addend with new args. Modify to get start, length from
1630 ifield whenever it is set. Also change condition on which
1631 self-describing relocs are encoded. Add hook into
1632 gas_cgen_encode_addend.
1633 (queue_fixup_recursively): Add signed RELC support. Change from masked
1634 expr to trunc flag. Restore assignment of sub-field value to
1635 temporary in fixups array. Reflect changed meaning of last arg to
1636 queue_fixup_recursively.
1637 (fixup): Add cgen_maybe_multi_ifield member.
1638 (make_right_shifted_expr): New function.
1639 (queue_fixup): Change to recursive function that fragments
1640 fixups if operand has a multi-ifield.
1641 (gas_cgen_parse_operand): Add RELC code to wrap expressions in
1642 symbols, call weak_operand_overflow_check, and fragment call
1643 queue_fixup with operand fields.
1644 (gas_cgen_finish_insn) Modify to manage ifield pointer.
1645 (weak_operand_overflow_check): New function to try to select
1647 (gas_cgen_encode_addend): New function for relc.
1648 (gas_cgen_install_complex_reloc): Likewise.
1649 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc.
1650 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add
1651 cgen_maybe_multi_ifield field to fx_cgen substructure.
1652 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32.
1653 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes.
1655 2007-02-03 DJ Delorie <dj@delorie.com>
1657 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3
1659 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define.
1660 (m32c_cons_fix_new): Prototype.
1662 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1664 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init.
1665 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise.
1667 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1669 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New.
1670 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table.
1671 (map_suffix_reloc_to_operator): New.
1672 (map_operator_to_reloc): New.
1673 (expression_maybe_register): Fix incorrect test of return value from
1674 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator.
1675 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc.
1677 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1679 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field.
1680 (tinsn_get_tok): Delete prototype.
1681 * config/tc-xtensa.c (tinsn_get_tok): Delete.
1683 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1685 * config/xtensa-relax.h (struct build_instr): Delete id field.
1686 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL
1688 (append_literal_op, append_label_op): Remove litnum/labnum arguments;
1689 set op_data fields to zero.
1690 (parse_id_constant): Delete.
1691 (build_transition): Remove code to handle numbered literals and labels.
1693 2007-02-02 Bob Wilson <bob.wilson@acm.org>
1695 * config/xtensa-relax.c (build_transition): Remove code after as_fatal.
1696 (build_transition_table): Likewise.
1698 2007-02-01 Bob Wilson <bob.wilson@acm.org>
1700 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of
1702 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove.
1704 2007-02-02 Alan Modra <amodra@bigpond.net.au>
1706 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move.
1707 (struct fix <fx_plt>): Rename to tcbit2.
1708 * write.c (fix_new_internal): Adjust.
1709 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1710 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1711 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1712 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1713 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1714 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1715 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1716 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise.
1717 * config/tc-msp430.c (msp430_force_relocation_local): Likewise.
1718 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt.
1719 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt.
1720 Instead, compare fx_r_type.
1721 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use
1722 fx_tcbit in place of fx_plt.
1723 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define.
1724 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference
1727 2007-01-30 Nick Clifton <nickc@redhat.com>
1729 * as.c (main): Mark symbols created via the --defsym command line
1730 option as volatile so that they can be overridden later on by a
1731 .set directive. This maintains compatibility with the behaviour
1732 of earlier versions of the assembler.
1733 * doc/as.texinfo (--defsym): Document that the defined symbol's
1734 value can be overridden via a .set directive.
1736 2007-01-28 H.J. Lu <hongjiu.lu@intel.com>
1738 * config/tc-i386.c (swap_imm_operands): Renamed to ...
1739 (swap_2_operands): This. Take 2 ints.
1740 (md_assemble): Updated.
1741 (swap_operands): Call swap_2_operands to swap 2 operands.
1743 2007-01-24 DJ Delorie <dj@redhat.com>
1745 * config/tc-m32c.c (md_pseudo_table): Add .3byte.
1747 2007-01-22 Nick Clifton <nickc@redhat.com>
1750 * tc-score.c: Remove unnecessary uses of _().
1751 Make the err_msg[] a file level local array in order to save
1753 Remove unnecessary sprintf()s.
1755 2007-01-18 Mei Ligang <ligang@sunnorth.com.cn>
1758 * config/tc-score.c : Using _() for const string.
1759 Do not assign inst.error with a local string pointer.
1760 (md_section_align): Pad section.
1762 2007-01-13 H.J. Lu <hongjiu.lu@intel.com>
1764 * config/tc-i386.c (build_modrm_byte): Check number of operands
1765 when procssing memory/register operand.
1767 2007-01-12 Nick Clifton <nickc@redhat.com>
1770 * macro.c (expand_irp): Do not ignore spaces inside quoted
1773 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1775 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1776 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1777 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete.
1778 (TC_FORCE_RELOCATION): Define.
1779 (TC_FORCE_RELOCATION_LOCAL): Define.
1780 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust.
1782 2007-01-12 Alan Modra <amodra@bigpond.net.au>
1784 * input-file.c (input_file_open): Check fgets return.
1786 2007-01-11 Paul Brook <paul@codesourcery.com>
1788 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs.
1790 2007-01-11 Nick Clifton <nickc@redhat.com>
1793 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt
1796 * config/tc-mcore.c (md_number_to_chars): Use
1797 number_to_chars_{big|little}endian.
1799 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
1801 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an
1802 architecture by itself.
1803 (m68k_ip): Don't issue a warning for tbl instructions on fido.
1804 (m68k_elf_final_processing): Treat Fido as an architecture by
1807 2007-01-08 Kai Tietz <kai.tietz@onevision.com>
1809 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
1811 2007-01-05 H.J. Lu <hongjiu.lu@intel.com>
1813 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax
1814 depending on allow_naked_reg.
1816 2007-01-04 Paul Brook <paul@codesourcery.com>
1818 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form.
1820 2007-01-04 H.J. Lu <hongjiu.lu@intel.com>
1823 * config/tc-i386.c (register_prefix): New.
1824 (set_intel_syntax): Set set_intel_syntax to "" if register
1825 prefix isn't needed.
1826 (check_byte_reg): Use register_prefix for error message.
1827 (check_long_reg): Likewise.
1828 (check_qword_reg): Likewise.
1829 (check_word_reg): Likewise.
1831 2007-01-04 Julian Brown <julian@codesourcery.com>
1833 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM.
1834 (do_neon_qshl_imm): Likewise.
1835 (do_neon_rshl): New function. Handle rounding variants of
1836 v{q}shl-by-register.
1837 (insns): Use do_neon_rshl for vrshl, vqrshl.
1839 2007-01-04 Paul Brook <paul@codesourcery.com>
1841 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt
1844 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1846 * config/tc-i386.c (swap_operands): Remove branches.
1848 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1850 * config/tc-i386.c: Update copyright year.
1851 * config/tc-i386.h: Likewise.
1853 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1855 * config/tc-i386.c (smallest_imm_type): Return unsigned int
1858 2007-01-03 H.J. Lu <hongjiu.lu@intel.com>
1860 * config/tc-i386.c: Convert to ISO C90 formatting
1861 * config/tc-i386.h: Likewise.
1863 2007-01-03 David Daney <ddaney@avtrex.com>
1865 * config/tc-mips.c (md_show_usage): Clean up -mno-shared
1868 For older changes see ChangeLog-2006
1874 version-control: never