1 /* BFD back-end for WDC 65816 COFF binaries.
2 Copyright 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
3 2006, 2007 Free Software Foundation, Inc.
4 Written by Steve Chamberlain, <sac@cygnus.com>.
6 This file is part of BFD, the Binary File Descriptor library.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 3 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
21 MA 02110-1301, USA. */
28 #include "coff/internal.h"
31 static int select_reloc
PARAMS ((reloc_howto_type
*));
32 static void rtype2howto
PARAMS ((arelent
*, struct internal_reloc
*));
33 static void reloc_processing
PARAMS ((arelent
*, struct internal_reloc
*, asymbol
**, bfd
*, asection
*));
34 static int w65_reloc16_estimate
PARAMS ((bfd
*, asection
*, arelent
*, unsigned int, struct bfd_link_info
*));
35 static void w65_reloc16_extra_cases
PARAMS ((bfd
*,struct bfd_link_info
*, struct bfd_link_order
*, arelent
*, bfd_byte
*, unsigned int *, unsigned int *));
37 #define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
38 static reloc_howto_type howto_table
[] =
40 HOWTO (R_W65_ABS8
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, "abs8", TRUE
, 0x000000ff, 0x000000ff, FALSE
),
41 HOWTO (R_W65_ABS16
, 1, 0, 16, FALSE
, 0, complain_overflow_bitfield
, 0, "abs16", TRUE
, 0x0000ffff, 0x0000ffff, FALSE
),
42 HOWTO (R_W65_ABS24
, 0, 2, 32, FALSE
, 0, complain_overflow_bitfield
, 0, "abs24", TRUE
, 0x00ffffff, 0x00ffffff, FALSE
),
43 HOWTO (R_W65_ABS8S8
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, ">abs8", TRUE
, 0x000000ff, 0x000000ff, FALSE
),
44 HOWTO (R_W65_ABS8S16
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, "^abs8", TRUE
, 0x000000ff, 0x000000ff, FALSE
),
45 HOWTO (R_W65_ABS16S8
, 1, 0, 16, FALSE
, 0, complain_overflow_bitfield
, 0, ">abs16", TRUE
, 0x0000ffff, 0x0000ffff, FALSE
),
46 HOWTO (R_W65_ABS16S16
,1, 0, 16, FALSE
, 0, complain_overflow_bitfield
, 0, "^abs16", TRUE
, 0x0000ffff, 0x0000ffff, FALSE
),
47 HOWTO (R_W65_PCR8
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, "pcrel8", TRUE
, 0x000000ff, 0x000000ff, TRUE
),
48 HOWTO (R_W65_PCR16
, 1, 0, 16, FALSE
, 0, complain_overflow_bitfield
, 0, "pcrel16", TRUE
, 0x0000ffff, 0x0000ffff, TRUE
),
49 HOWTO (R_W65_DP
, 0, 0, 8, FALSE
, 0, complain_overflow_bitfield
, 0, "dp", TRUE
, 0x000000ff, 0x000000ff, FALSE
),
52 /* Turn a howto into a reloc number. */
54 #define SELECT_RELOC(x,howto) \
55 { x.r_type = select_reloc(howto); }
57 #define BADMAG(x) (W65BADMAG(x))
58 #define W65 1 /* Customize coffcode.h */
59 #define __A_MAGIC_SET__
61 /* Code to swap in the reloc */
62 #define SWAP_IN_RELOC_OFFSET H_GET_32
63 #define SWAP_OUT_RELOC_OFFSET H_PUT_32
64 #define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
65 dst->r_stuff[0] = 'S'; \
66 dst->r_stuff[1] = 'C';
70 reloc_howto_type
*howto
;
75 /* Code to turn a r_type into a howto ptr, uses the above howto table. */
78 rtype2howto (internal
, dst
)
80 struct internal_reloc
*dst
;
82 internal
->howto
= howto_table
+ dst
->r_type
- 1;
85 #define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
87 /* Perform any necessary magic to the addend in a reloc entry. */
89 #define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
90 cache_ptr->addend = ext_reloc.r_offset;
92 #define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
93 reloc_processing(relent, reloc, symbols, abfd, section)
96 reloc_processing (relent
, reloc
, symbols
, abfd
, section
)
98 struct internal_reloc
*reloc
;
103 relent
->address
= reloc
->r_vaddr
;
104 rtype2howto (relent
, reloc
);
106 if (((int) reloc
->r_symndx
) > 0)
107 relent
->sym_ptr_ptr
= symbols
+ obj_convert (abfd
)[reloc
->r_symndx
];
109 relent
->sym_ptr_ptr
= (asymbol
**) bfd_abs_section_ptr
->symbol_ptr_ptr
;
111 relent
->addend
= reloc
->r_offset
;
113 relent
->address
-= section
->vma
;
114 /* relent->section = 0;*/
118 w65_reloc16_estimate (abfd
, input_section
, reloc
, shrink
, link_info
)
120 asection
*input_section
;
123 struct bfd_link_info
*link_info
;
129 /* The address of the thing to be relocated will have moved back by
130 the size of the shrink - but we don't change reloc->address here,
131 since we need it to know where the relocation lives in the source
134 /* reloc->address -= shrink; conceptual */
136 bfd_vma address
= reloc
->address
- shrink
;
138 switch (reloc
->howto
->type
)
145 /* Thing is a move one byte. */
147 value
= bfd_coff_reloc16_get_value (reloc
, link_info
, input_section
);
151 /* Change the reloc type from 16bit, possible 8 to 8bit
153 reloc
->howto
= reloc
->howto
+ 1;
154 /* The place to relc moves back by one. */
155 /* This will be two bytes smaller in the long run. */
157 bfd_perform_slip (abfd
, 2, input_section
, address
);
161 /* This is the 24 bit branch which could become an 8 bitter,
162 the relocation points to the first byte of the insn, not the
166 value
= bfd_coff_reloc16_get_value (reloc
, link_info
, input_section
);
168 dot
= input_section
->output_section
->vma
+
169 input_section
->output_offset
+ address
;
171 /* See if the address we're looking at within 127 bytes of where
172 we are, if so then we can use a small branch rather than the
173 jump we were going to. */
176 if (-120 < (long) gap
&& (long) gap
< 120)
178 /* Change the reloc type from 24bit, possible 8 to 8bit
180 reloc
->howto
= reloc
->howto
+ 1;
181 /* This will be two bytes smaller in the long run. */
183 bfd_perform_slip (abfd
, 2, input_section
, address
);
188 value
= bfd_coff_reloc16_get_value (reloc
, link_info
, input_section
);
190 dot
= input_section
->output_section
->vma
+
191 input_section
->output_offset
+ address
;
193 /* See if the address we're looking at within 127 bytes of where
194 we are, if so then we can use a small branch rather than the
195 jump we were going to. */
196 gap
= value
- (dot
- shrink
);
198 if (-120 < (long) gap
&& (long) gap
< 120)
200 /* Change the reloc type from 16bit, possible 8 to 8bit
202 reloc
->howto
= reloc
->howto
+ 1;
203 /* The place to relc moves back by one. */
205 /* This will be two bytes smaller in the long run. */
207 bfd_perform_slip (abfd
, 2, input_section
, address
);
215 /* First phase of a relaxing link. */
219 R_MOV16B1 R_MOV16B2 mov.b with 16bit or 8 bit address
220 R_JMP1 R_JMP2 jmp or pcrel branch
221 R_JMPL1 R_JMPL_B8 24jmp or pcrel branch
222 R_MOV24B1 R_MOV24B2 24 or 8 bit reloc for mov.b */
225 w65_reloc16_extra_cases (abfd
, link_info
, link_order
, reloc
, data
, src_ptr
,
228 struct bfd_link_info
*link_info
;
229 struct bfd_link_order
*link_order
;
232 unsigned int *src_ptr
;
233 unsigned int *dst_ptr
;
235 unsigned int src_address
= *src_ptr
;
236 unsigned int dst_address
= *dst_ptr
;
237 asection
*input_section
= link_order
->u
.indirect
.section
;
239 switch (reloc
->howto
->type
)
244 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
246 bfd_put_8 (abfd
, gap
, data
+ dst_address
);
254 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
257 bfd_put_8 (abfd
, gap
, data
+ dst_address
);
265 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
268 bfd_put_8 (abfd
, gap
, data
+ dst_address
);
276 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
279 bfd_put_16 (abfd
, (bfd_vma
) gap
, data
+ dst_address
);
286 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
289 bfd_put_16 (abfd
, (bfd_vma
) gap
, data
+ dst_address
);
296 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
299 bfd_put_16 (abfd
, (bfd_vma
) gap
, data
+ dst_address
);
307 unsigned int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
309 bfd_put_16 (abfd
, (bfd_vma
) gap
, data
+ dst_address
);
310 bfd_put_8 (abfd
, gap
>> 16, data
+dst_address
+ 2);
318 int gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
320 bfd_vma dot
= (dst_address
321 + input_section
->output_offset
322 + input_section
->output_section
->vma
);
325 if (gap
< -128 || gap
> 127)
327 if (! ((*link_info
->callbacks
->reloc_overflow
)
329 bfd_asymbol_name (*reloc
->sym_ptr_ptr
),
330 reloc
->howto
->name
, reloc
->addend
, input_section
->owner
,
331 input_section
, reloc
->address
)))
334 bfd_put_8 (abfd
, gap
, data
+ dst_address
);
342 bfd_vma gap
= bfd_coff_reloc16_get_value (reloc
, link_info
,
344 bfd_vma dot
= (dst_address
345 + input_section
->output_offset
346 + input_section
->output_section
->vma
);
348 /* This wraps within the page, so ignore the relativeness, look at the
350 if ((gap
& 0xf0000) != (dot
& 0xf0000))
352 if (! ((*link_info
->callbacks
->reloc_overflow
)
354 bfd_asymbol_name (*reloc
->sym_ptr_ptr
),
355 reloc
->howto
->name
, reloc
->addend
, input_section
->owner
,
356 input_section
, reloc
->address
)))
361 bfd_put_16 (abfd
, gap
, data
+ dst_address
);
367 printf (_("ignoring reloc %s\n"), reloc
->howto
->name
);
371 *src_ptr
= src_address
;
372 *dst_ptr
= dst_address
;
375 #define coff_reloc16_extra_cases w65_reloc16_extra_cases
376 #define coff_reloc16_estimate w65_reloc16_estimate
378 #include "coffcode.h"
380 #undef coff_bfd_get_relocated_section_contents
381 #undef coff_bfd_relax_section
382 #define coff_bfd_get_relocated_section_contents \
383 bfd_coff_reloc16_get_relocated_section_contents
384 #define coff_bfd_relax_section bfd_coff_reloc16_relax_section
386 CREATE_LITTLE_COFF_TARGET_VEC (w65_vec
, "coff-w65", BFD_IS_RELAXABLE
, 0, '_', NULL
, COFF_SWAP_TABLE
)