1 /* Target-dependent header for the MIPS architecture, for GDB, the GNU Debugger.
3 Copyright (C) 2002-2022 Free Software Foundation, Inc.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
28 /* All the possible MIPS ABIs. */
41 /* Return the MIPS ABI associated with GDBARCH. */
42 enum mips_abi
mips_abi (struct gdbarch
*gdbarch
);
44 /* Base and compressed MIPS ISA variations. */
47 ISA_MIPS
= -1, /* mips_compression_string depends on it. */
52 /* Corresponding MSYMBOL_TARGET_FLAG aliases. */
53 #define MSYMBOL_TARGET_FLAG_MIPS16 MSYMBOL_TARGET_FLAG_1
54 #define MSYMBOL_TARGET_FLAG_MICROMIPS MSYMBOL_TARGET_FLAG_2
56 /* Return the MIPS ISA's register size. Just a short cut to the BFD
57 architecture's word size. */
58 extern int mips_isa_regsize (struct gdbarch
*gdbarch
);
60 /* Return the current index for various MIPS registers. */
65 int fp_implementation_revision
;
66 int fp_control_status
;
67 int badvaddr
; /* Bad vaddr for addressing exception. */
68 int cause
; /* Describes last exception. */
69 int hi
; /* Multiply/divide temp. */
71 int dspacc
; /* SmartMIPS/DSP accumulators. */
72 int dspctl
; /* DSP control. */
74 extern const struct mips_regnum
*mips_regnum (struct gdbarch
*gdbarch
);
76 /* Some MIPS boards don't support floating point while others only
77 support single-precision floating-point operations. */
81 MIPS_FPU_DOUBLE
, /* Full double precision floating point. */
82 MIPS_FPU_SINGLE
, /* Single precision floating point (R4650). */
83 MIPS_FPU_NONE
/* No floating point. */
86 /* MIPS specific per-architecture information. */
87 struct mips_gdbarch_tdep
: gdbarch_tdep
89 /* from the elf header */
93 enum mips_abi mips_abi
{};
94 enum mips_abi found_abi
{};
95 enum mips_isa mips_isa
{};
96 enum mips_fpu_type mips_fpu_type
{};
97 int mips_last_arg_regnum
= 0;
98 int mips_last_fp_arg_regnum
= 0;
99 int default_mask_address_p
= 0;
100 /* Is the target using 64-bit raw integer registers but only
101 storing a left-aligned 32-bit value in each? */
102 int mips64_transfers_32bit_regs_p
= 0;
103 /* Indexes for various registers. IRIX and embedded have
104 different values. This contains the "public" fields. Don't
105 add any that do not need to be public. */
106 const struct mips_regnum
*regnum
= nullptr;
107 /* Register names table for the current register set. */
108 const char * const *mips_processor_reg_names
= nullptr;
110 /* The size of register data available from the target, if known.
111 This doesn't quite obsolete the manual
112 mips64_transfers_32bit_regs_p, since that is documented to force
113 left alignment even for big endian (very strange). */
114 int register_size_valid_p
= 0;
115 int register_size
= 0;
117 /* Return the expected next PC if FRAME is stopped at a syscall
119 CORE_ADDR (*syscall_next_pc
) (struct frame_info
*frame
) = nullptr;
122 /* Register numbers of various important registers. */
126 MIPS_ZERO_REGNUM
= 0, /* Read-only register, always 0. */
128 MIPS_V0_REGNUM
= 2, /* Function integer return value. */
129 MIPS_A0_REGNUM
= 4, /* Loc of first arg during a subr call. */
130 MIPS_S2_REGNUM
= 18, /* Contains return address in MIPS16 thunks. */
131 MIPS_T9_REGNUM
= 25, /* Contains address of callee in PIC. */
135 MIPS_PS_REGNUM
= 32, /* Contains processor status. */
136 MIPS_EMBED_LO_REGNUM
= 33,
137 MIPS_EMBED_HI_REGNUM
= 34,
138 MIPS_EMBED_BADVADDR_REGNUM
= 35,
139 MIPS_EMBED_CAUSE_REGNUM
= 36,
140 MIPS_EMBED_PC_REGNUM
= 37,
141 MIPS_EMBED_FP0_REGNUM
= 38,
142 MIPS_UNUSED_REGNUM
= 73, /* Never used, FIXME. */
143 MIPS_FIRST_EMBED_REGNUM
= 74, /* First CP0 register for embedded use. */
144 MIPS_PRID_REGNUM
= 89, /* Processor ID. */
145 MIPS_LAST_EMBED_REGNUM
= 89 /* Last one. */
148 /* Instruction sizes and other useful constants. */
151 MIPS_INSN16_SIZE
= 2,
152 MIPS_INSN32_SIZE
= 4,
153 /* The number of floating-point or integer registers. */
157 /* Single step based on where the current instruction will take us. */
158 extern std::vector
<CORE_ADDR
> mips_software_single_step
159 (struct regcache
*regcache
);
161 /* Strip the ISA (compression) bit off from ADDR. */
162 extern CORE_ADDR
mips_unmake_compact_addr (CORE_ADDR addr
);
164 /* Tell if the program counter value in MEMADDR is in a standard
166 extern int mips_pc_is_mips (CORE_ADDR memaddr
);
168 /* Tell if the program counter value in MEMADDR is in a MIPS16
170 extern int mips_pc_is_mips16 (struct gdbarch
*gdbarch
, CORE_ADDR memaddr
);
172 /* Tell if the program counter value in MEMADDR is in a microMIPS
174 extern int mips_pc_is_micromips (struct gdbarch
*gdbarch
, CORE_ADDR memaddr
);
176 /* Return the currently configured (or set) saved register size. */
177 extern unsigned int mips_abi_regsize (struct gdbarch
*gdbarch
);
179 /* Make PC the address of the next instruction to execute. */
180 extern void mips_write_pc (struct regcache
*regcache
, CORE_ADDR pc
);
182 /* Target descriptions which only indicate the size of general
184 extern struct target_desc
*mips_tdesc_gp32
;
185 extern struct target_desc
*mips_tdesc_gp64
;
187 /* Return non-zero if PC is in a MIPS SVR4 lazy binding stub section. */
190 in_mips_stubs_section (CORE_ADDR pc
)
192 return pc_in_section (pc
, ".MIPS.stubs");
195 #endif /* MIPS_TDEP_H */