src/config/SPEEDYBEEF7V3/config.h

   1 /*
   2  * This file is part of Betaflight.
   3  *
   4  * Betaflight is free software. You can redistribute this software
   5  * and/or modify this software under the terms of the GNU General
   6  * Public License as published by the Free Software Foundation,
   7  * either version 3 of the License, or (at your option) any later
   8  * version.
   9  *
  10  * Betaflight is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  13  *
  14  * See the GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public
  17  * License along with this software.
  18  *
  19  * If not, see <http://www.gnu.org/licenses/>.
  20  */
  21
  22 #pragma once
  23
  24 #define FC_TARGET_MCU     STM32F7X2
  25
  26 #define BOARD_NAME        SPEEDYBEEF7V3
  27 #define MANUFACTURER_ID   SPBE
  28
  29 #define USE_GYRO
  30 #define USE_ACC
  31 #define USE_ACCGYRO_BMI270
  32 #define USE_BARO_BMP280
  33 #define USE_SDCARD
  34 #define USE_MAX7456
  35
  36 #define BEEPER_PIN           PC13
  37 #define MOTOR1_PIN           PA15
  38 #define MOTOR2_PIN           PB3
  39 #define MOTOR3_PIN           PB4
  40 #define MOTOR4_PIN           PB6
  41 #define MOTOR5_PIN           PB7
  42 #define MOTOR6_PIN           PB5
  43 #define MOTOR7_PIN           PB0
  44 #define MOTOR8_PIN           PB1
  45 #define RX_PPM_PIN           PA3
  46 #define LED_STRIP_PIN        PC8
  47 #define UART1_TX_PIN         PA9
  48 #define UART2_TX_PIN         PA2
  49 #define UART3_TX_PIN         PB10
  50 #define UART6_TX_PIN         PC6
  51 #define UART1_RX_PIN         PA10
  52 #define UART2_RX_PIN         PA3
  53 #define UART3_RX_PIN         PB11
  54 #define UART4_RX_PIN         PA1
  55 #define UART6_RX_PIN         PC7
  56 #define I2C1_SCL_PIN         PB8
  57 #define I2C1_SDA_PIN         PB9
  58 #define LED0_PIN             PA14
  59 #define LED1_PIN             PA13
  60 #define SPI1_SCK_PIN         PA5
  61 #define SPI2_SCK_PIN         PB13
  62 #define SPI3_SCK_PIN         PC10
  63 #define SPI1_MISO_PIN        PA6
  64 #define SPI2_MISO_PIN        PB14
  65 #define SPI3_MISO_PIN        PC11
  66 #define SPI1_MOSI_PIN        PA7
  67 #define SPI2_MOSI_PIN        PB15
  68 #define SPI3_MOSI_PIN        PC12
  69 #define CAMERA_CONTROL_PIN   PA0
  70 #define ADC_VBAT_PIN         PC2
  71 #define ADC_RSSI_PIN         PC0
  72 #define ADC_CURR_PIN         PC1
  73 #define SDCARD_CS_PIN        PD2
  74 #define PINIO1_PIN           PC9
  75 #define FLASH_CS_PIN         PD2
  76 #define MAX7456_SPI_CS_PIN   PB12
  77 #define GYRO_1_EXTI_PIN      PC4
  78 #define GYRO_2_EXTI_PIN      PC3
  79 #define GYRO_1_CS_PIN        PB2
  80 #define GYRO_2_CS_PIN        PC15
  81
  82 #define TIMER_PIN_MAPPING \
  83     TIMER_PIN_MAP( 0, PA15, 1,  0) \
  84     TIMER_PIN_MAP( 1, PB3 , 1,  0) \
  85     TIMER_PIN_MAP( 2, PB4 , 1,  0) \
  86     TIMER_PIN_MAP( 3, PB6 , 1,  0) \
  87     TIMER_PIN_MAP( 4, PB7 , 1,  0) \
  88     TIMER_PIN_MAP( 5, PB5 , 1,  0) \
  89     TIMER_PIN_MAP( 6, PB0 , 2,  0) \
  90     TIMER_PIN_MAP( 7, PB1 , 2,  0) \
  91     TIMER_PIN_MAP( 8, PC8 , 2,  0) \
  92     TIMER_PIN_MAP( 9, PA3 , 3, -1) \
  93     TIMER_PIN_MAP(10, PA0 , 2,  0)
  94
  95
  96 #define SPI3_TX_DMA_OPT     0
  97 #define ADC1_DMA_OPT        0
  98
  99 //TODO #define GYRO_TO_USE SECOND
 100 //TODO #define MAG_BUSTYPE I2C
 101 #define MAG_I2C_INSTANCE (I2CDEV_1)
 102 #define USE_BARO
 103 #define BARO_I2C_INSTANCE (I2CDEV_1)
 104
 105 #define DEFAULT_BLACKBOX_DEVICE     BLACKBOX_DEVICE_SDCARD
 106 #define ENABLE_DSHOT_DMAR DSHOT_DMAR_ON
 107 #define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
 108 #define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
 109 #define DEFAULT_VOLTAGE_METER_SCALE 110
 110 #define DEFAULT_CURRENT_METER_SCALE 490
 111 #define BEEPER_INVERTED
 112 #define USE_SDCARD_SPI
 113 #define SDCARD_SPI_INSTANCE SPI3
 114 #define MAX7456_SPI_INSTANCE SPI2
 115 //TODO #define PINIO_CONFIG 129,1,1,1
 116 //TODO #define PINIO_BOX 0,255,255,255
 117 #define FLASH_SPI_INSTANCE SPI3
 118 #define USE_SPI_GYRO
 119 #define GYRO_1_SPI_INSTANCE SPI1
 120 #define GYRO_1_ALIGN CW270_DEG_FLIP
 121 #define GYRO_1_ALIGN_PITCH 1800
 122 #define GYRO_1_ALIGN_YAW 2700
 123 #define GYRO_2_SPI_INSTANCE SPI1
 124 #define GYRO_2_ALIGN CW0_DEG_FLIP
 125 #define GYRO_2_ALIGN_PITCH 1800