Makefile

   1 ###############################################################################
   2 # "THE BEER-WARE LICENSE" (Revision 42):
   3 # <msmith@FreeBSD.ORG> wrote this file. As long as you retain this notice you
   4 # can do whatever you want with this stuff. If we meet some day, and you think
   5 # this stuff is worth it, you can buy me a beer in return
   6 ###############################################################################
   7 #
   8 # Makefile for building the cleanflight firmware.
   9 #
  10 # Invoke this with 'make help' to see the list of supported targets.
  11 #
  12
  13 ###############################################################################
  14
  15
  16 # Things that the user might override on the commandline
  17 #
  18
  19 # The target to build, see VALID_TARGETS below
  20 TARGET          ?= NAZE
  21
  22 # Compile-time options
  23 OPTIONS         ?=
  24
  25 # compile for OpenPilot BootLoader support
  26 OPBL ?=no
  27
  28 # Debugger optons, must be empty or GDB
  29 DEBUG ?=
  30
  31 # Serial port/Device for flashing
  32 SERIAL_DEVICE   ?= $(firstword $(wildcard /dev/ttyUSB*) no-port-found)
  33
  34 # Flash size (KB).  Some low-end chips actually have more flash than advertised, use this to override.
  35 FLASH_SIZE ?=
  36
  37 ###############################################################################
  38 # Things that need to be maintained as the source changes
  39 #
  40
  41 FORKNAME                         = betaflight
  42
  43 CC3D_TARGETS = CC3D CC3D_OPBL
  44
  45 VALID_TARGETS    = NAZE NAZE32PRO OLIMEXINO STM32F3DISCOVERY CHEBUZZF3 $(CC3D_TARGETS) CJMCU EUSTM32F103RC SPRACINGF3 PORT103R SPARKY ALIENFLIGHTF1 ALIENFLIGHTF3 COLIBRI_RACE LUX_RACE MOTOLAB RMDO IRCFUSIONF3 AFROMINI SPRACINGF3MINI SPRACINGF3EVO DOGE
  46
  47 # Valid targets for OP VCP support
  48 VCP_VALID_TARGETS = $(CC3D_TARGETS)
  49
  50 # Valid targets for OP BootLoader support
  51 OPBL_VALID_TARGETS = CC3D_OPBL
  52
  53 64K_TARGETS  = CJMCU
  54 128K_TARGETS = ALIENFLIGHTF1 $(CC3D_TARGETS) NAZE OLIMEXINO RMDO AFROMINI
  55 256K_TARGETS = EUSTM32F103RC PORT103R STM32F3DISCOVERY CHEBUZZF3 NAZE32PRO SPRACINGF3 IRCFUSIONF3 SPARKY ALIENFLIGHTF3 COLIBRI_RACE LUX_RACE MOTOLAB SPRACINGF3MINI SPRACINGF3EVO DOGE
  56
  57 F3_TARGETS = STM32F3DISCOVERY CHEBUZZF3 NAZE32PRO SPRACINGF3 IRCFUSIONF3 SPARKY ALIENFLIGHTF3 COLIBRI_RACE LUX_RACE MOTOLAB RMDO SPRACINGF3MINI SPRACINGF3EVO DOGE
  58
  59
  60 # Configure default flash sizes for the targets
  61 ifeq ($(FLASH_SIZE),)
  62 ifeq ($(TARGET),$(filter $(TARGET),$(64K_TARGETS)))
  63 FLASH_SIZE = 64
  64 else ifeq ($(TARGET),$(filter $(TARGET),$(128K_TARGETS)))
  65 FLASH_SIZE = 128
  66 else ifeq ($(TARGET),$(filter $(TARGET),$(256K_TARGETS)))
  67 FLASH_SIZE = 256
  68 else
  69 $(error FLASH_SIZE not configured for target $(TARGET))
  70 endif
  71 endif
  72
  73 REVISION = $(shell git log -1 --format="%h")
  74
  75 FC_VER_MAJOR := $(shell grep " FC_VERSION_MAJOR" src/main/version.h | awk '{print $$3}' )
  76 FC_VER_MINOR := $(shell grep " FC_VERSION_MINOR" src/main/version.h | awk '{print $$3}' )
  77 FC_VER_PATCH := $(shell grep " FC_VERSION_PATCH" src/main/version.h | awk '{print $$3}' )
  78
  79 FC_VER := $(FC_VER_MAJOR).$(FC_VER_MINOR).$(FC_VER_PATCH)
  80
  81 # Working directories
  82 ROOT             := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST))))
  83 SRC_DIR          = $(ROOT)/src/main
  84 OBJECT_DIR       = $(ROOT)/obj/main
  85 BIN_DIR          = $(ROOT)/obj
  86 CMSIS_DIR        = $(ROOT)/lib/main/CMSIS
  87 INCLUDE_DIRS     = $(SRC_DIR)
  88 LINKER_DIR       = $(ROOT)/src/main/target
  89
  90 # Search path for sources
  91 VPATH           := $(SRC_DIR):$(SRC_DIR)/startup
  92 USBFS_DIR       = $(ROOT)/lib/main/STM32_USB-FS-Device_Driver
  93 USBPERIPH_SRC = $(notdir $(wildcard $(USBFS_DIR)/src/*.c))
  94 FATFS_DIR       = $(ROOT)/lib/main/FatFS
  95 FATFS_SRC = $(notdir $(wildcard $(FATFS_DIR)/*.c))
  96
  97 ifeq ($(TARGET),$(filter $(TARGET),$(F3_TARGETS)))
  98
  99 CSOURCES        := $(shell find $(SRC_DIR) -name '*.c')
 100
 101 STDPERIPH_DIR   = $(ROOT)/lib/main/STM32F30x_StdPeriph_Driver
 102
 103 STDPERIPH_SRC = $(notdir $(wildcard $(STDPERIPH_DIR)/src/*.c))
 104
 105 EXCLUDES        = stm32f30x_crc.c \
 106                 stm32f30x_can.c
 107
 108 STDPERIPH_SRC := $(filter-out ${EXCLUDES}, $(STDPERIPH_SRC))
 109
 110 DEVICE_STDPERIPH_SRC = \
 111                 $(STDPERIPH_SRC)
 112
 113
 114 VPATH           := $(VPATH):$(CMSIS_DIR)/CM1/CoreSupport:$(CMSIS_DIR)/CM1/DeviceSupport/ST/STM32F30x
 115 CMSIS_SRC        = $(notdir $(wildcard $(CMSIS_DIR)/CM1/CoreSupport/*.c \
 116                            $(CMSIS_DIR)/CM1/DeviceSupport/ST/STM32F30x/*.c))
 117
 118 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 119                    $(STDPERIPH_DIR)/inc \
 120                    $(CMSIS_DIR)/CM1/CoreSupport \
 121                    $(CMSIS_DIR)/CM1/DeviceSupport/ST/STM32F30x
 122
 123 ifneq ($(TARGET),$(filter $(TARGET),SPRACINGF3 IRCFUSIONF3))
 124 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 125                    $(USBFS_DIR)/inc \
 126                    $(ROOT)/src/main/vcp
 127
 128 VPATH := $(VPATH):$(USBFS_DIR)/src
 129
 130 DEVICE_STDPERIPH_SRC := $(DEVICE_STDPERIPH_SRC)\
 131                    $(USBPERIPH_SRC)
 132
 133 endif
 134
 135 ifeq ($(TARGET),SPRACINGF3MINI)
 136 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 137                    $(FATFS_DIR) \
 138
 139 VPATH := $(VPATH):$(FATFS_DIR)
 140 endif
 141
 142 LD_SCRIPT        = $(LINKER_DIR)/stm32_flash_f303_$(FLASH_SIZE)k.ld
 143
 144 ARCH_FLAGS       = -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -fsingle-precision-constant -Wdouble-promotion
 145 DEVICE_FLAGS = -DSTM32F303xC -DSTM32F303
 146 TARGET_FLAGS = -D$(TARGET)
 147 ifeq ($(TARGET),CHEBUZZF3)
 148 # CHEBUZZ is a VARIANT of STM32F3DISCOVERY
 149 TARGET_FLAGS := $(TARGET_FLAGS) -DSTM32F3DISCOVERY
 150 endif
 151
 152 ifeq ($(TARGET),$(filter $(TARGET),RMDO IRCFUSIONF3))
 153 # RMDO and IRCFUSIONF3 are a VARIANT of SPRACINGF3
 154 TARGET_FLAGS := $(TARGET_FLAGS) -DSPRACINGF3
 155 endif
 156
 157 else ifeq ($(TARGET),$(filter $(TARGET),EUSTM32F103RC PORT103R))
 158
 159
 160 STDPERIPH_DIR    = $(ROOT)/lib/main/STM32F10x_StdPeriph_Driver
 161
 162 STDPERIPH_SRC = $(notdir $(wildcard $(STDPERIPH_DIR)/src/*.c))
 163
 164 EXCLUDES        = stm32f10x_crc.c \
 165                 stm32f10x_cec.c \
 166                 stm32f10x_can.c
 167
 168 STDPERIPH_SRC := $(filter-out ${EXCLUDES}, $(STDPERIPH_SRC))
 169
 170 # Search path and source files for the CMSIS sources
 171 VPATH           := $(VPATH):$(CMSIS_DIR)/CM3/CoreSupport:$(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x
 172 CMSIS_SRC        = $(notdir $(wildcard $(CMSIS_DIR)/CM3/CoreSupport/*.c \
 173                            $(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x/*.c))
 174
 175 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 176                    $(STDPERIPH_DIR)/inc \
 177                    $(CMSIS_DIR)/CM3/CoreSupport \
 178                    $(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x \
 179
 180 LD_SCRIPT        = $(LINKER_DIR)/stm32_flash_f103_$(FLASH_SIZE)k.ld
 181
 182 ARCH_FLAGS       = -mthumb -mcpu=cortex-m3
 183 TARGET_FLAGS = -D$(TARGET) -pedantic
 184 DEVICE_FLAGS = -DSTM32F10X_HD -DSTM32F10X
 185
 186 DEVICE_STDPERIPH_SRC = $(STDPERIPH_SRC)
 187
 188 else
 189
 190 STDPERIPH_DIR    = $(ROOT)/lib/main/STM32F10x_StdPeriph_Driver
 191
 192 STDPERIPH_SRC = $(notdir $(wildcard $(STDPERIPH_DIR)/src/*.c))
 193
 194 EXCLUDES        = stm32f10x_crc.c \
 195                 stm32f10x_cec.c \
 196                 stm32f10x_can.c
 197
 198 STDPERIPH_SRC := $(filter-out ${EXCLUDES}, $(STDPERIPH_SRC))
 199
 200 # Search path and source files for the CMSIS sources
 201 VPATH           := $(VPATH):$(CMSIS_DIR)/CM3/CoreSupport:$(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x
 202 CMSIS_SRC        = $(notdir $(wildcard $(CMSIS_DIR)/CM3/CoreSupport/*.c \
 203                            $(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x/*.c))
 204
 205 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 206                    $(STDPERIPH_DIR)/inc \
 207                    $(CMSIS_DIR)/CM3/CoreSupport \
 208                    $(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x \
 209
 210 DEVICE_STDPERIPH_SRC = $(STDPERIPH_SRC)
 211
 212 ifeq ($(TARGET),$(filter $(TARGET), $(VCP_VALID_TARGETS)))
 213 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 214                    $(USBFS_DIR)/inc \
 215                    $(ROOT)/src/main/vcp
 216
 217 VPATH := $(VPATH):$(USBFS_DIR)/src
 218
 219 DEVICE_STDPERIPH_SRC := $(DEVICE_STDPERIPH_SRC) \
 220                    $(USBPERIPH_SRC)
 221
 222 endif
 223
 224 LD_SCRIPT        = $(LINKER_DIR)/stm32_flash_f103_$(FLASH_SIZE)k.ld
 225
 226 ARCH_FLAGS       = -mthumb -mcpu=cortex-m3
 227 TARGET_FLAGS = -D$(TARGET) -pedantic
 228 DEVICE_FLAGS = -DSTM32F10X_MD -DSTM32F10X
 229
 230 endif
 231
 232 ifneq ($(FLASH_SIZE),)
 233 DEVICE_FLAGS := $(DEVICE_FLAGS) -DFLASH_SIZE=$(FLASH_SIZE)
 234 endif
 235
 236 TARGET_DIR = $(ROOT)/src/main/target/$(TARGET)
 237 TARGET_SRC = $(notdir $(wildcard $(TARGET_DIR)/*.c))
 238
 239 ifeq ($(TARGET),ALIENFLIGHTF1)
 240 # ALIENFLIGHTF1 is a VARIANT of NAZE
 241 TARGET_FLAGS := $(TARGET_FLAGS) -DNAZE -DALIENFLIGHT
 242 TARGET_DIR = $(ROOT)/src/main/target/NAZE
 243 endif
 244
 245 ifeq ($(TARGET),$(filter $(TARGET), $(CC3D_TARGETS)))
 246 TARGET_FLAGS := $(TARGET_FLAGS) -DCC3D
 247 TARGET_DIR = $(ROOT)/src/main/target/CC3D
 248 endif
 249
 250 ifneq ($(filter $(TARGET),$(OPBL_VALID_TARGETS)),)
 251 OPBL=yes
 252 endif
 253
 254 ifeq ($(OPBL),yes)
 255 ifneq ($(filter $(TARGET),$(OPBL_VALID_TARGETS)),)
 256 TARGET_FLAGS := -DOPBL $(TARGET_FLAGS)
 257 LD_SCRIPT        = $(LINKER_DIR)/stm32_flash_f103_$(FLASH_SIZE)k_opbl.ld
 258 .DEFAULT_GOAL := binary
 259 else
 260 $(error OPBL specified with a unsupported target)
 261 endif
 262 endif
 263
 264 ifeq ($(TARGET),AFROMINI)
 265 # AFROMINI is a VARIANT of NAZE being recognized as rev4, but needs to use rev5 config
 266 TARGET_FLAGS := $(TARGET_FLAGS) -DNAZE -DAFROMINI
 267 TARGET_DIR = $(ROOT)/src/main/target/NAZE
 268 endif
 269
 270 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 271                     $(TARGET_DIR)
 272
 273 VPATH           := $(VPATH):$(TARGET_DIR)
 274
 275 COMMON_SRC = build_config.c \
 276                    debug.c \
 277                    version.c \
 278                    $(TARGET_SRC) \
 279                    config/config.c \
 280                    config/runtime_config.c \
 281                    common/maths.c \
 282                    common/printf.c \
 283                    common/typeconversion.c \
 284                    common/encoding.c \
 285                    common/filter.c \
 286                    scheduler.c \
 287                    scheduler_tasks.c \
 288                    main.c \
 289                    mw.c \
 290                    flight/altitudehold.c \
 291                    flight/failsafe.c \
 292                    flight/pid.c \
 293                    flight/imu.c \
 294                    flight/mixer.c \
 295                    drivers/bus_i2c_soft.c \
 296                    drivers/serial.c \
 297                    drivers/sound_beeper.c \
 298                    drivers/system.c \
 299                    drivers/gyro_sync.c \
 300                    drivers/dma.c \
 301                    drivers/buf_writer.c \
 302                    io/beeper.c \
 303                    io/rc_controls.c \
 304                    io/rc_curves.c \
 305                    io/serial.c \
 306                    io/serial_4way.c \
 307                    io/serial_4way_avrootloader.c \
 308                    io/serial_4way_stk500v2.c \
 309                    io/serial_cli.c \
 310                    io/serial_msp.c \
 311                    io/statusindicator.c \
 312                    rx/rx.c \
 313                    rx/pwm.c \
 314                    rx/msp.c \
 315                    rx/sbus.c \
 316                    rx/sumd.c \
 317                    rx/sumh.c \
 318                    rx/spektrum.c \
 319                    rx/xbus.c \
 320                    rx/ibus.c \
 321            rx/jetiexbus.c \
 322                    sensors/acceleration.c \
 323                    sensors/battery.c \
 324                    sensors/boardalignment.c \
 325                    sensors/compass.c \
 326                    sensors/gyro.c \
 327                    sensors/initialisation.c \
 328                    $(CMSIS_SRC) \
 329                    $(DEVICE_STDPERIPH_SRC)
 330
 331 HIGHEND_SRC = \
 332                    flight/gtune.c \
 333                    flight/navigation.c \
 334                    flight/gps_conversion.c \
 335                    common/colorconversion.c \
 336                    io/gps.c \
 337                    io/ledstrip.c \
 338                    io/display.c \
 339                    telemetry/telemetry.c \
 340                    telemetry/frsky.c \
 341                    telemetry/hott.c \
 342                    telemetry/smartport.c \
 343                    telemetry/ltm.c \
 344                    sensors/sonar.c \
 345                    sensors/barometer.c \
 346                    blackbox/blackbox.c \
 347                    blackbox/blackbox_io.c
 348
 349 VCP_SRC = \
 350                    vcp/hw_config.c \
 351                    vcp/stm32_it.c \
 352                    vcp/usb_desc.c \
 353                    vcp/usb_endp.c \
 354                    vcp/usb_istr.c \
 355                    vcp/usb_prop.c \
 356                    vcp/usb_pwr.c \
 357                    drivers/serial_usb_vcp.c \
 358                    drivers/usb_io.c
 359
 360 NAZE_SRC = startup_stm32f10x_md_gcc.S \
 361                    drivers/accgyro_adxl345.c \
 362                    drivers/accgyro_bma280.c \
 363                    drivers/accgyro_l3g4200d.c \
 364                    drivers/accgyro_mma845x.c \
 365                    drivers/accgyro_mpu.c \
 366                    drivers/accgyro_mpu3050.c \
 367                    drivers/accgyro_mpu6050.c \
 368                    drivers/accgyro_mpu6500.c \
 369                    drivers/accgyro_spi_mpu6500.c \
 370                    drivers/adc.c \
 371                    drivers/adc_stm32f10x.c \
 372                    drivers/barometer_bmp085.c \
 373                    drivers/barometer_bmp280.c \
 374                    drivers/barometer_ms5611.c \
 375                    drivers/barometer_bmp280.c \
 376                    drivers/bus_spi.c \
 377                    drivers/bus_i2c_stm32f10x.c \
 378                    drivers/compass_hmc5883l.c \
 379                    drivers/display_ug2864hsweg01.h \
 380                    drivers/flash_m25p16.c \
 381                    drivers/gpio_stm32f10x.c \
 382                    drivers/inverter.c \
 383                    drivers/light_led_stm32f10x.c \
 384                    drivers/light_ws2811strip.c \
 385                    drivers/light_ws2811strip_stm32f10x.c \
 386                    drivers/sonar_hcsr04.c \
 387                    drivers/pwm_mapping.c \
 388                    drivers/pwm_output.c \
 389                    drivers/pwm_rx.c \
 390                    drivers/serial_softserial.c \
 391                    drivers/serial_uart.c \
 392                    drivers/serial_uart_stm32f10x.c \
 393                    drivers/sound_beeper_stm32f10x.c \
 394                    drivers/system_stm32f10x.c \
 395                    drivers/timer.c \
 396                    drivers/timer_stm32f10x.c \
 397                    io/flashfs.c \
 398                    hardware_revision.c \
 399                    $(HIGHEND_SRC) \
 400                    $(COMMON_SRC)
 401
 402 ALIENFLIGHTF1_SRC = $(NAZE_SRC)
 403
 404 AFROMINI_SRC = $(NAZE_SRC)
 405
 406 EUSTM32F103RC_SRC = startup_stm32f10x_hd_gcc.S \
 407                    drivers/accgyro_adxl345.c \
 408                    drivers/accgyro_bma280.c \
 409                    drivers/accgyro_l3g4200d.c \
 410                    drivers/accgyro_mma845x.c \
 411                    drivers/accgyro_mpu.c \
 412                    drivers/accgyro_mpu3050.c \
 413                    drivers/accgyro_mpu6050.c \
 414                    drivers/accgyro_spi_mpu6000.c \
 415                    drivers/accgyro_spi_mpu6500.c \
 416                    drivers/adc.c \
 417                    drivers/adc_stm32f10x.c \
 418                    drivers/barometer_bmp085.c \
 419                    drivers/barometer_bmp280.c \
 420                    drivers/barometer_ms5611.c \
 421                    drivers/bus_i2c_stm32f10x.c \
 422                    drivers/bus_spi.c \
 423                    drivers/compass_ak8975.c \
 424                    drivers/compass_hmc5883l.c \
 425                    drivers/display_ug2864hsweg01.c \
 426                    drivers/flash_m25p16.c \
 427                    drivers/gpio_stm32f10x.c \
 428                    drivers/inverter.c \
 429                    drivers/light_led_stm32f10x.c \
 430                    drivers/light_ws2811strip.c \
 431                    drivers/light_ws2811strip_stm32f10x.c \
 432                    drivers/pwm_mapping.c \
 433                    drivers/pwm_output.c \
 434                    drivers/pwm_rx.c \
 435                    drivers/serial_softserial.c \
 436                    drivers/serial_uart.c \
 437                    drivers/serial_uart_stm32f10x.c \
 438                    drivers/sonar_hcsr04.c \
 439                    drivers/sound_beeper_stm32f10x.c \
 440                    drivers/system_stm32f10x.c \
 441                    drivers/timer.c \
 442                    drivers/timer_stm32f10x.c \
 443                    io/flashfs.c \
 444                    $(HIGHEND_SRC) \
 445                    $(COMMON_SRC)
 446
 447 PORT103R_SRC = $(EUSTM32F103RC_SRC)
 448
 449 OLIMEXINO_SRC = startup_stm32f10x_md_gcc.S \
 450                    drivers/accgyro_mpu.c \
 451                    drivers/accgyro_mpu6050.c \
 452                    drivers/adc.c \
 453                    drivers/adc_stm32f10x.c \
 454                    drivers/barometer_bmp085.c \
 455                    drivers/barometer_bmp280.c \
 456                    drivers/bus_i2c_stm32f10x.c \
 457                    drivers/bus_spi.c \
 458                    drivers/compass_hmc5883l.c \
 459                    drivers/gpio_stm32f10x.c \
 460                    drivers/light_led_stm32f10x.c \
 461                    drivers/light_ws2811strip.c \
 462                    drivers/light_ws2811strip_stm32f10x.c \
 463                    drivers/pwm_mapping.c \
 464                    drivers/pwm_output.c \
 465                    drivers/pwm_rx.c \
 466                    drivers/serial_softserial.c \
 467                    drivers/serial_uart.c \
 468                    drivers/serial_uart_stm32f10x.c \
 469                    drivers/sonar_hcsr04.c \
 470                    drivers/sound_beeper_stm32f10x.c \
 471                    drivers/system_stm32f10x.c \
 472                    drivers/timer.c \
 473                    drivers/timer_stm32f10x.c \
 474                    $(HIGHEND_SRC) \
 475                    $(COMMON_SRC)
 476
 477 CJMCU_SRC = \
 478                    startup_stm32f10x_md_gcc.S \
 479                    drivers/adc.c \
 480                    drivers/adc_stm32f10x.c \
 481                    drivers/accgyro_mpu.c \
 482                    drivers/accgyro_mpu6050.c \
 483                    drivers/bus_i2c_stm32f10x.c \
 484                    drivers/compass_hmc5883l.c \
 485                    drivers/gpio_stm32f10x.c \
 486                    drivers/light_led_stm32f10x.c \
 487                    drivers/pwm_mapping.c \
 488                    drivers/pwm_output.c \
 489                    drivers/pwm_rx.c \
 490                    drivers/serial_uart.c \
 491                    drivers/serial_uart_stm32f10x.c \
 492                    drivers/sound_beeper_stm32f10x.c \
 493                    drivers/system_stm32f10x.c \
 494                    drivers/timer.c \
 495                    drivers/timer_stm32f10x.c \
 496                    hardware_revision.c \
 497                    flight/gtune.c \
 498                    blackbox/blackbox.c \
 499                    blackbox/blackbox_io.c \
 500                    $(COMMON_SRC)
 501
 502 CC3D_SRC = \
 503                    startup_stm32f10x_md_gcc.S \
 504                    drivers/accgyro_mpu.c \
 505                    drivers/accgyro_spi_mpu6000.c \
 506                    drivers/adc.c \
 507                    drivers/adc_stm32f10x.c \
 508                    drivers/barometer_bmp085.c \
 509                    drivers/barometer_bmp280.c \
 510                    drivers/barometer_ms5611.c \
 511                    drivers/bus_spi.c \
 512                    drivers/bus_i2c_stm32f10x.c \
 513                    drivers/compass_hmc5883l.c \
 514                    drivers/display_ug2864hsweg01.c \
 515                    drivers/flash_m25p16.c \
 516                    drivers/gpio_stm32f10x.c \
 517                    drivers/inverter.c \
 518                    drivers/light_led_stm32f10x.c \
 519                    drivers/light_ws2811strip.c \
 520                    drivers/light_ws2811strip_stm32f10x.c \
 521                    drivers/pwm_mapping.c \
 522                    drivers/pwm_output.c \
 523                    drivers/pwm_rx.c \
 524                    drivers/serial_softserial.c \
 525                    drivers/serial_uart.c \
 526                    drivers/serial_uart_stm32f10x.c \
 527                    drivers/sonar_hcsr04.c \
 528                    drivers/sound_beeper_stm32f10x.c \
 529                    drivers/system_stm32f10x.c \
 530                    drivers/timer.c \
 531                    drivers/timer_stm32f10x.c \
 532                    io/flashfs.c \
 533                    $(HIGHEND_SRC) \
 534                    $(COMMON_SRC) \
 535                    $(VCP_SRC)
 536
 537 STM32F30x_COMMON_SRC = \
 538                    startup_stm32f30x_md_gcc.S \
 539                    drivers/adc.c \
 540                    drivers/adc_stm32f30x.c \
 541                    drivers/bus_i2c_stm32f30x.c \
 542                    drivers/bus_spi.c \
 543                    drivers/display_ug2864hsweg01.h \
 544                    drivers/gpio_stm32f30x.c \
 545                    drivers/light_led_stm32f30x.c \
 546                    drivers/pwm_mapping.c \
 547                    drivers/pwm_output.c \
 548                    drivers/pwm_rx.c \
 549                    drivers/serial_uart.c \
 550                    drivers/serial_uart_stm32f30x.c \
 551                    drivers/sound_beeper_stm32f30x.c \
 552                    drivers/system_stm32f30x.c \
 553                    drivers/timer.c \
 554                    drivers/timer_stm32f30x.c
 555
 556 NAZE32PRO_SRC = \
 557                    $(STM32F30x_COMMON_SRC) \
 558                    $(HIGHEND_SRC) \
 559                    $(COMMON_SRC) \
 560                    $(VCP_SRC)
 561
 562 STM32F3DISCOVERY_COMMON_SRC = \
 563                    $(STM32F30x_COMMON_SRC) \
 564                    drivers/light_ws2811strip.c \
 565                    drivers/light_ws2811strip_stm32f30x.c \
 566                    drivers/accgyro_l3gd20.c \
 567                    drivers/accgyro_l3gd20.c \
 568                    drivers/accgyro_lsm303dlhc.c \
 569                    drivers/compass_hmc5883l.c \
 570                    $(VCP_SRC)
 571
 572 STM32F3DISCOVERY_SRC = \
 573                    $(STM32F3DISCOVERY_COMMON_SRC) \
 574                    drivers/accgyro_adxl345.c \
 575                    drivers/accgyro_bma280.c \
 576                    drivers/accgyro_mma845x.c \
 577                    drivers/accgyro_mpu.c \
 578                    drivers/accgyro_mpu3050.c \
 579                    drivers/accgyro_mpu6050.c \
 580                    drivers/accgyro_l3g4200d.c \
 581                    drivers/barometer_ms5611.c \
 582                    drivers/barometer_bmp280.c \
 583                    drivers/compass_ak8975.c \
 584                    drivers/sdcard.c \
 585                    drivers/sdcard_standard.c \
 586                    io/asyncfatfs/asyncfatfs.c \
 587                    io/asyncfatfs/fat_standard.c \
 588                    $(HIGHEND_SRC) \
 589                    $(COMMON_SRC)
 590
 591 CHEBUZZF3_SRC = \
 592                    $(STM32F3DISCOVERY_SRC) \
 593                    $(HIGHEND_SRC) \
 594                    $(COMMON_SRC)
 595
 596 COLIBRI_RACE_SRC = \
 597                    $(STM32F30x_COMMON_SRC) \
 598                    io/i2c_bst.c \
 599                    drivers/bus_bst_stm32f30x.c \
 600                    drivers/accgyro_mpu.c \
 601                    drivers/accgyro_mpu6500.c \
 602                    drivers/accgyro_spi_mpu6000.c \
 603                    drivers/accgyro_spi_mpu6500.c \
 604                    drivers/accgyro_mpu6500.c \
 605                    drivers/barometer_ms5611.c \
 606                    drivers/compass_ak8963.c \
 607                    drivers/compass_ak8975.c \
 608                    drivers/compass_hmc5883l.c \
 609                    drivers/display_ug2864hsweg01.c \
 610                    drivers/light_ws2811strip.c \
 611                    drivers/light_ws2811strip_stm32f30x.c \
 612                    drivers/serial_usb_vcp.c \
 613                    $(HIGHEND_SRC) \
 614                    $(COMMON_SRC) \
 615                    $(VCP_SRC)
 616
 617 LUX_RACE_SRC = \
 618                    $(STM32F30x_COMMON_SRC) \
 619                    drivers/accgyro_mpu.c \
 620                    drivers/accgyro_mpu6500.c \
 621                    drivers/accgyro_spi_mpu6500.c \
 622                    drivers/accgyro_mpu6500.c \
 623                    drivers/light_ws2811strip.c \
 624                    drivers/light_ws2811strip_stm32f30x.c \
 625                    drivers/serial_usb_vcp.c \
 626                    $(HIGHEND_SRC) \
 627                    $(COMMON_SRC) \
 628                    $(VCP_SRC)
 629
 630 DOGE_SRC = \
 631                    $(STM32F30x_COMMON_SRC) \
 632                    drivers/accgyro_mpu.c \
 633                    drivers/accgyro_mpu6500.c \
 634                    drivers/accgyro_spi_mpu6500.c \
 635                    drivers/barometer_bmp280.c \
 636                    drivers/barometer_spi_bmp280.c \
 637                    drivers/light_ws2811strip.c \
 638                    drivers/light_ws2811strip_stm32f30x.c \
 639                    drivers/serial_usb_vcp.c \
 640                    $(HIGHEND_SRC) \
 641                    $(COMMON_SRC) \
 642                    $(VCP_SRC)
 643
 644 SPARKY_SRC = \
 645                    $(STM32F30x_COMMON_SRC) \
 646                    drivers/display_ug2864hsweg01.c \
 647                    drivers/accgyro_mpu.c \
 648                    drivers/accgyro_mpu6050.c \
 649                    drivers/barometer_ms5611.c \
 650                    drivers/barometer_bmp280.c \
 651                    drivers/compass_ak8975.c \
 652                    drivers/light_ws2811strip.c \
 653                    drivers/light_ws2811strip_stm32f30x.c \
 654                    drivers/serial_usb_vcp.c \
 655                    $(HIGHEND_SRC) \
 656                    $(COMMON_SRC) \
 657                    $(VCP_SRC)
 658
 659 ALIENFLIGHTF3_SRC = \
 660                    $(STM32F30x_COMMON_SRC) \
 661                    drivers/accgyro_mpu.c \
 662                    drivers/accgyro_mpu6050.c \
 663                    drivers/accgyro_mpu.c \
 664                    drivers/accgyro_mpu6500.c \
 665                    drivers/accgyro_spi_mpu6500.c \
 666                    drivers/compass_ak8963.c \
 667                    hardware_revision.c \
 668                    drivers/serial_usb_vcp.c \
 669                    drivers/sonar_hcsr04.c \
 670                    $(HIGHEND_SRC) \
 671                    $(COMMON_SRC) \
 672                    $(VCP_SRC)
 673
 674 RMDO_SRC = \
 675                    $(STM32F30x_COMMON_SRC) \
 676                    drivers/accgyro_mpu.c \
 677                    drivers/accgyro_mpu6050.c \
 678                    drivers/barometer_bmp280.c \
 679                    drivers/display_ug2864hsweg01.h \
 680                    drivers/flash_m25p16.c \
 681                    drivers/light_ws2811strip.c \
 682                    drivers/light_ws2811strip_stm32f30x.c \
 683                    drivers/serial_softserial.c \
 684                    drivers/sonar_hcsr04.c \
 685                    io/flashfs.c \
 686                    $(HIGHEND_SRC) \
 687                    $(COMMON_SRC)
 688
 689 SPRACINGF3_SRC = \
 690                    $(STM32F30x_COMMON_SRC) \
 691                    drivers/accgyro_mpu.c \
 692                    drivers/accgyro_mpu6050.c \
 693                    drivers/barometer_ms5611.c \
 694                    drivers/compass_ak8975.c \
 695                    drivers/barometer_bmp085.c \
 696                    drivers/barometer_bmp280.c \
 697                    drivers/compass_hmc5883l.c \
 698                    drivers/display_ug2864hsweg01.h \
 699                    drivers/flash_m25p16.c \
 700                    drivers/light_ws2811strip.c \
 701                    drivers/light_ws2811strip_stm32f30x.c \
 702                    drivers/serial_softserial.c \
 703                    drivers/sonar_hcsr04.c \
 704                    io/flashfs.c \
 705                    $(HIGHEND_SRC) \
 706                    $(COMMON_SRC)
 707
 708 IRCFUSIONF3_SRC = \
 709                    $(STM32F30x_COMMON_SRC) \
 710                    drivers/accgyro_mpu.c \
 711                    drivers/accgyro_mpu6050.c \
 712                    drivers/barometer_ms5611.c \
 713                    drivers/compass_ak8975.c \
 714                    drivers/barometer_bmp085.c \
 715                    drivers/barometer_bmp280.c \
 716                    drivers/compass_hmc5883l.c \
 717                    drivers/display_ug2864hsweg01.h \
 718                    drivers/flash_m25p16.c \
 719                    drivers/light_ws2811strip.c \
 720                    drivers/light_ws2811strip_stm32f30x.c \
 721                    drivers/serial_softserial.c \
 722                    drivers/sonar_hcsr04.c \
 723                    io/flashfs.c \
 724                    $(HIGHEND_SRC) \
 725                    $(COMMON_SRC)
 726
 727 SPRACINGF3EVO_SRC        = \
 728                    $(STM32F30x_COMMON_SRC) \
 729                    drivers/accgyro_mpu.c \
 730                    drivers/accgyro_mpu6500.c \
 731                    drivers/accgyro_spi_mpu6500.c \
 732                    drivers/barometer_bmp280.c \
 733                    drivers/compass_ak8963.c \
 734                    drivers/display_ug2864hsweg01.h \
 735                    drivers/light_ws2811strip.c \
 736                    drivers/light_ws2811strip_stm32f30x.c \
 737                    drivers/serial_usb_vcp.c \
 738                    drivers/sdcard.c \
 739                    drivers/sdcard_standard.c \
 740                    drivers/transponder_ir.c \
 741                    drivers/transponder_ir_stm32f30x.c \
 742                    io/asyncfatfs/asyncfatfs.c \
 743                    io/asyncfatfs/fat_standard.c \
 744                    io/transponder_ir.c \
 745                    $(HIGHEND_SRC) \
 746                    $(COMMON_SRC) \
 747                    $(VCP_SRC)
 748
 749 MOTOLAB_SRC = \
 750                    $(STM32F30x_COMMON_SRC) \
 751                    drivers/accgyro_mpu.c \
 752                    drivers/display_ug2864hsweg01.c \
 753                    drivers/accgyro_mpu6050.c \
 754                    drivers/accgyro_spi_mpu6000.c \
 755                    drivers/barometer_ms5611.c \
 756                    drivers/compass_hmc5883l.c \
 757                    drivers/light_ws2811strip.c \
 758                    drivers/light_ws2811strip_stm32f30x.c \
 759                    drivers/serial_softserial.c \
 760                    drivers/serial_usb_vcp.c \
 761                    drivers/flash_m25p16.c \
 762                    io/flashfs.c \
 763                    $(HIGHEND_SRC) \
 764                    $(COMMON_SRC) \
 765                    $(VCP_SRC)
 766
 767 SPRACINGF3MINI_SRC       = \
 768                    $(STM32F30x_COMMON_SRC) \
 769                    drivers/accgyro_mpu.c \
 770                    drivers/accgyro_mpu6500.c \
 771                    drivers/barometer_bmp280.c \
 772                    drivers/compass_ak8975.c \
 773                    drivers/compass_hmc5883l.c \
 774                    drivers/display_ug2864hsweg01.h \
 775                    drivers/flash_m25p16.c \
 776                    drivers/light_ws2811strip.c \
 777                    drivers/light_ws2811strip_stm32f30x.c \
 778                    drivers/serial_softserial.c \
 779                    drivers/serial_usb_vcp.c \
 780                    drivers/sonar_hcsr04.c \
 781                    drivers/sdcard.c \
 782                    drivers/sdcard_standard.c \
 783                    drivers/transponder_ir.c \
 784                    drivers/transponder_ir_stm32f30x.c \
 785                    io/asyncfatfs/asyncfatfs.c \
 786                    io/asyncfatfs/fat_standard.c \
 787                    io/transponder_ir.c \
 788                    $(HIGHEND_SRC) \
 789                    $(COMMON_SRC) \
 790                    $(VCP_SRC)
 791 #                  $(FATFS_SRC)
 792
 793 # Search path and source files for the ST stdperiph library
 794 VPATH           := $(VPATH):$(STDPERIPH_DIR)/src
 795
 796 ###############################################################################
 797 # Things that might need changing to use different tools
 798 #
 799
 800 # Tool names
 801 CC               = arm-none-eabi-gcc
 802 OBJCOPY          = arm-none-eabi-objcopy
 803 SIZE             = arm-none-eabi-size
 804
 805 #
 806 # Tool options.
 807 #
 808
 809 ifeq ($(DEBUG),GDB)
 810 OPTIMIZE         = -O0
 811 LTO_FLAGS        = $(OPTIMIZE)
 812 else
 813 OPTIMIZE         = -Os
 814 LTO_FLAGS        = -flto -fuse-linker-plugin $(OPTIMIZE)
 815 endif
 816
 817 DEBUG_FLAGS      = -ggdb3 -DDEBUG
 818
 819 CFLAGS           = $(ARCH_FLAGS) \
 820                    $(LTO_FLAGS) \
 821                    $(addprefix -D,$(OPTIONS)) \
 822                    $(addprefix -I,$(INCLUDE_DIRS)) \
 823                    $(DEBUG_FLAGS) \
 824                    -std=gnu99 \
 825                    -Wall -Wextra -Wunsafe-loop-optimizations -Wdouble-promotion \
 826                    -ffunction-sections \
 827                    -fdata-sections \
 828                    $(DEVICE_FLAGS) \
 829                    -DUSE_STDPERIPH_DRIVER \
 830                    $(TARGET_FLAGS) \
 831                    -D'__FORKNAME__="$(FORKNAME)"' \
 832                    -D'__TARGET__="$(TARGET)"' \
 833                    -D'__REVISION__="$(REVISION)"' \
 834                    -save-temps=obj \
 835                    -MMD -MP
 836
 837 ASFLAGS          = $(ARCH_FLAGS) \
 838                    -x assembler-with-cpp \
 839                    $(addprefix -I,$(INCLUDE_DIRS)) \
 840                   -MMD -MP
 841
 842 LDFLAGS          = -lm \
 843                    -nostartfiles \
 844                    --specs=nano.specs \
 845                    -lc \
 846                    -lnosys \
 847                    $(ARCH_FLAGS) \
 848                    $(LTO_FLAGS) \
 849                    $(DEBUG_FLAGS) \
 850                    -static \
 851                    -Wl,-gc-sections,-Map,$(TARGET_MAP) \
 852                    -Wl,-L$(LINKER_DIR) \
 853            -Wl,--cref \
 854                    -T$(LD_SCRIPT)
 855
 856 ###############################################################################
 857 # No user-serviceable parts below
 858 ###############################################################################
 859
 860 CPPCHECK         = cppcheck $(CSOURCES) --enable=all --platform=unix64 \
 861                    --std=c99 --inline-suppr --quiet --force \
 862                    $(addprefix -I,$(INCLUDE_DIRS)) \
 863                    -I/usr/include -I/usr/include/linux
 864
 865 #
 866 # Things we will build
 867 #
 868 ifeq ($(filter $(TARGET),$(VALID_TARGETS)),)
 869 $(error Target '$(TARGET)' is not valid, must be one of $(VALID_TARGETS))
 870 endif
 871
 872 CC3D_OPBL_SRC     = $(CC3D_SRC)
 873
 874 TARGET_BIN       = $(BIN_DIR)/$(FORKNAME)_$(FC_VER)_$(TARGET).bin
 875 TARGET_HEX       = $(BIN_DIR)/$(FORKNAME)_$(FC_VER)_$(TARGET).hex
 876 TARGET_ELF       = $(OBJECT_DIR)/$(FORKNAME)_$(TARGET).elf
 877 TARGET_OBJS      = $(addsuffix .o,$(addprefix $(OBJECT_DIR)/$(TARGET)/,$(basename $($(TARGET)_SRC))))
 878 TARGET_DEPS      = $(addsuffix .d,$(addprefix $(OBJECT_DIR)/$(TARGET)/,$(basename $($(TARGET)_SRC))))
 879 TARGET_MAP       = $(OBJECT_DIR)/$(FORKNAME)_$(TARGET).map
 880
 881
 882 CLEAN_ARTIFACTS := $(TARGET_BIN)
 883 CLEAN_ARTIFACTS += $(TARGET_HEX)
 884 CLEAN_ARTIFACTS += $(TARGET_ELF) $(TARGET_OBJS) $(TARGET_MAP)
 885
 886 # List of buildable ELF files and their object dependencies.
 887 # It would be nice to compute these lists, but that seems to be just beyond make.
 888
 889 $(TARGET_HEX): $(TARGET_ELF)
 890         $(OBJCOPY) -O ihex --set-start 0x8000000 $< $@
 891
 892 $(TARGET_BIN): $(TARGET_ELF)
 893         $(OBJCOPY) -O binary $< $@
 894
 895 $(TARGET_ELF):  $(TARGET_OBJS)
 896         $(CC) -o $@ $^ $(LDFLAGS)
 897         $(SIZE) $(TARGET_ELF)
 898
 899 # Compile
 900 $(OBJECT_DIR)/$(TARGET)/%.o: %.c
 901         @mkdir -p $(dir $@)
 902         @echo %% $(notdir $<)
 903         @$(CC) -c -o $@ $(CFLAGS) $<
 904
 905 # Assemble
 906 $(OBJECT_DIR)/$(TARGET)/%.o: %.s
 907         @mkdir -p $(dir $@)
 908         @echo %% $(notdir $<)
 909         @$(CC) -c -o $@ $(ASFLAGS) $<
 910
 911 $(OBJECT_DIR)/$(TARGET)/%.o: %.S
 912         @mkdir -p $(dir $@)
 913         @echo %% $(notdir $<)
 914         @$(CC) -c -o $@ $(ASFLAGS) $<
 915
 916
 917 ## all         : default task; compile C code, build firmware
 918 all: binary
 919
 920 ## clean       : clean up all temporary / machine-generated files
 921 clean:
 922         rm -f $(CLEAN_ARTIFACTS)
 923         rm -rf $(OBJECT_DIR)/$(TARGET)
 924         cd src/test && $(MAKE) clean || true
 925
 926 flash_$(TARGET): $(TARGET_HEX)
 927         stty -F $(SERIAL_DEVICE) raw speed 115200 -crtscts cs8 -parenb -cstopb -ixon
 928         echo -n 'R' >$(SERIAL_DEVICE)
 929         stm32flash -w $(TARGET_HEX) -v -g 0x0 -b 115200 $(SERIAL_DEVICE)
 930
 931 ## flash       : flash firmware (.hex) onto flight controller
 932 flash: flash_$(TARGET)
 933
 934 st-flash_$(TARGET): $(TARGET_BIN)
 935         st-flash --reset write $< 0x08000000
 936
 937 ## st-flash    : flash firmware (.bin) onto flight controller
 938 st-flash: st-flash_$(TARGET)
 939
 940 binary: $(TARGET_BIN)
 941 hex:    $(TARGET_HEX)
 942
 943 unbrick_$(TARGET): $(TARGET_HEX)
 944         stty -F $(SERIAL_DEVICE) raw speed 115200 -crtscts cs8 -parenb -cstopb -ixon
 945         stm32flash -w $(TARGET_HEX) -v -g 0x0 -b 115200 $(SERIAL_DEVICE)
 946
 947 ## unbrick     : unbrick flight controller
 948 unbrick: unbrick_$(TARGET)
 949
 950 ## cppcheck    : run static analysis on C source code
 951 cppcheck: $(CSOURCES)
 952         $(CPPCHECK)
 953
 954 cppcheck-result.xml: $(CSOURCES)
 955         $(CPPCHECK) --xml-version=2 2> cppcheck-result.xml
 956
 957 ## help        : print this help message and exit
 958 help: Makefile
 959         @echo ""
 960         @echo "Makefile for the $(FORKNAME) firmware"
 961         @echo ""
 962         @echo "Usage:"
 963         @echo "        make [TARGET=<target>] [OPTIONS=\"<options>\"]"
 964         @echo ""
 965         @echo "Valid TARGET values are: $(VALID_TARGETS)"
 966         @echo ""
 967         @sed -n 's/^## //p' $<
 968
 969 ## test        : run the cleanflight test suite
 970 test:
 971         cd src/test && $(MAKE) test || true
 972
 973 # rebuild everything when makefile changes
 974 $(TARGET_OBJS) : Makefile
 975
 976 # include auto-generated dependencies
 977 -include $(TARGET_DEPS)