Makefile

   1 ###############################################################################
   2 # "THE BEER-WARE LICENSE" (Revision 42):
   3 # <msmith@FreeBSD.ORG> wrote this file. As long as you retain this notice you
   4 # can do whatever you want with this stuff. If we meet some day, and you think
   5 # this stuff is worth it, you can buy me a beer in return
   6 ###############################################################################
   7 #
   8 # Makefile for building the cleanflight firmware.
   9 #
  10 # Invoke this with 'make help' to see the list of supported targets.
  11 #
  12
  13 ###############################################################################
  14
  15
  16 # Things that the user might override on the commandline
  17 #
  18
  19 # The target to build, see VALID_TARGETS below
  20 TARGET          ?= NAZE
  21
  22 # Compile-time options
  23 OPTIONS         ?=
  24
  25 # compile for OpenPilot BootLoader support
  26 OPBL ?=no
  27
  28 # Debugger optons, must be empty or GDB
  29 DEBUG ?=
  30
  31 # Serial port/Device for flashing
  32 SERIAL_DEVICE   ?= $(firstword $(wildcard /dev/ttyUSB*) no-port-found)
  33
  34 # Flash size (KB).  Some low-end chips actually have more flash than advertised, use this to override.
  35 FLASH_SIZE ?=
  36
  37 ###############################################################################
  38 # Things that need to be maintained as the source changes
  39 #
  40
  41 FORKNAME                         = betaflight
  42
  43 CC3D_TARGETS = CC3D CC3D_OPBL
  44
  45 VALID_TARGETS    = NAZE NAZE32PRO OLIMEXINO STM32F3DISCOVERY CHEBUZZF3 $(CC3D_TARGETS) CJMCU EUSTM32F103RC SPRACINGF3 PORT103R SPARKY ALIENFLIGHTF1 ALIENFLIGHTF3 COLIBRI_RACE LUX_RACE MOTOLAB RMDO IRCFUSIONF3 AFROMINI SPRACINGF3MINI
  46
  47 # Valid targets for OP VCP support
  48 VCP_VALID_TARGETS = $(CC3D_TARGETS)
  49
  50 # Valid targets for OP BootLoader support
  51 OPBL_VALID_TARGETS = CC3D_OPBL
  52
  53 64K_TARGETS  = CJMCU
  54 128K_TARGETS = ALIENFLIGHTF1 $(CC3D_TARGETS) NAZE OLIMEXINO RMDO AFROMINI
  55 256K_TARGETS = EUSTM32F103RC PORT103R STM32F3DISCOVERY CHEBUZZF3 NAZE32PRO SPRACINGF3 IRCFUSIONF3 SPARKY ALIENFLIGHTF3 COLIBRI_RACE LUX_RACE MOTOLAB SPRACINGF3MINI
  56
  57 F3_TARGETS = STM32F3DISCOVERY CHEBUZZF3 NAZE32PRO SPRACINGF3 IRCFUSIONF3 SPARKY ALIENFLIGHTF3 COLIBRI_RACE LUX_RACE MOTOLAB RMDO SPRACINGF3MINI
  58
  59
  60 # Configure default flash sizes for the targets
  61 ifeq ($(FLASH_SIZE),)
  62 ifeq ($(TARGET),$(filter $(TARGET),$(64K_TARGETS)))
  63 FLASH_SIZE = 64
  64 else ifeq ($(TARGET),$(filter $(TARGET),$(128K_TARGETS)))
  65 FLASH_SIZE = 128
  66 else ifeq ($(TARGET),$(filter $(TARGET),$(256K_TARGETS)))
  67 FLASH_SIZE = 256
  68 else
  69 $(error FLASH_SIZE not configured for target $(TARGET))
  70 endif
  71 endif
  72
  73 REVISION = $(shell git log -1 --format="%h")
  74
  75 FC_VER_MAJOR := $(shell grep " FC_VERSION_MAJOR" src/main/version.h | awk '{print $$3}' )
  76 FC_VER_MINOR := $(shell grep " FC_VERSION_MINOR" src/main/version.h | awk '{print $$3}' )
  77 FC_VER_PATCH := $(shell grep " FC_VERSION_PATCH" src/main/version.h | awk '{print $$3}' )
  78
  79 FC_VER := $(FC_VER_MAJOR).$(FC_VER_MINOR).$(FC_VER_PATCH)
  80
  81 # Working directories
  82 ROOT             := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST))))
  83 SRC_DIR          = $(ROOT)/src/main
  84 OBJECT_DIR       = $(ROOT)/obj/main
  85 BIN_DIR          = $(ROOT)/obj
  86 CMSIS_DIR        = $(ROOT)/lib/main/CMSIS
  87 INCLUDE_DIRS     = $(SRC_DIR)
  88 LINKER_DIR       = $(ROOT)/src/main/target
  89
  90 # Search path for sources
  91 VPATH           := $(SRC_DIR):$(SRC_DIR)/startup
  92 USBFS_DIR       = $(ROOT)/lib/main/STM32_USB-FS-Device_Driver
  93 USBPERIPH_SRC = $(notdir $(wildcard $(USBFS_DIR)/src/*.c))
  94 FATFS_DIR       = $(ROOT)/lib/main/FatFS
  95 FATFS_SRC = $(notdir $(wildcard $(FATFS_DIR)/*.c))
  96
  97 ifeq ($(TARGET),$(filter $(TARGET),$(F3_TARGETS)))
  98
  99 CSOURCES        := $(shell find $(SRC_DIR) -name '*.c')
 100
 101 STDPERIPH_DIR   = $(ROOT)/lib/main/STM32F30x_StdPeriph_Driver
 102
 103 STDPERIPH_SRC = $(notdir $(wildcard $(STDPERIPH_DIR)/src/*.c))
 104
 105 EXCLUDES        = stm32f30x_crc.c \
 106                 stm32f30x_can.c
 107
 108 STDPERIPH_SRC := $(filter-out ${EXCLUDES}, $(STDPERIPH_SRC))
 109
 110 DEVICE_STDPERIPH_SRC = \
 111                 $(STDPERIPH_SRC)
 112
 113
 114 VPATH           := $(VPATH):$(CMSIS_DIR)/CM1/CoreSupport:$(CMSIS_DIR)/CM1/DeviceSupport/ST/STM32F30x
 115 CMSIS_SRC        = $(notdir $(wildcard $(CMSIS_DIR)/CM1/CoreSupport/*.c \
 116                            $(CMSIS_DIR)/CM1/DeviceSupport/ST/STM32F30x/*.c))
 117
 118 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 119                    $(STDPERIPH_DIR)/inc \
 120                    $(CMSIS_DIR)/CM1/CoreSupport \
 121                    $(CMSIS_DIR)/CM1/DeviceSupport/ST/STM32F30x
 122
 123 ifneq ($(TARGET),$(filter $(TARGET),SPRACINGF3 IRCFUSIONF3))
 124 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 125                    $(USBFS_DIR)/inc \
 126                    $(ROOT)/src/main/vcp
 127
 128 VPATH := $(VPATH):$(USBFS_DIR)/src
 129
 130 DEVICE_STDPERIPH_SRC := $(DEVICE_STDPERIPH_SRC)\
 131                    $(USBPERIPH_SRC)
 132
 133 endif
 134
 135 ifeq ($(TARGET),SPRACINGF3MINI)
 136 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 137                    $(FATFS_DIR) \
 138
 139 VPATH := $(VPATH):$(FATFS_DIR)
 140 endif
 141
 142 LD_SCRIPT        = $(LINKER_DIR)/stm32_flash_f303_$(FLASH_SIZE)k.ld
 143
 144 ARCH_FLAGS       = -mthumb -mcpu=cortex-m4 -mfloat-abi=hard -mfpu=fpv4-sp-d16 -fsingle-precision-constant -Wdouble-promotion
 145 DEVICE_FLAGS = -DSTM32F303xC -DSTM32F303
 146 TARGET_FLAGS = -D$(TARGET)
 147 ifeq ($(TARGET),CHEBUZZF3)
 148 # CHEBUZZ is a VARIANT of STM32F3DISCOVERY
 149 TARGET_FLAGS := $(TARGET_FLAGS) -DSTM32F3DISCOVERY
 150 endif
 151
 152 ifeq ($(TARGET),$(filter $(TARGET),RMDO IRCFUSIONF3))
 153 # RMDO and IRCFUSIONF3 are a VARIANT of SPRACINGF3
 154 TARGET_FLAGS := $(TARGET_FLAGS) -DSPRACINGF3
 155 endif
 156
 157 else ifeq ($(TARGET),$(filter $(TARGET),EUSTM32F103RC PORT103R))
 158
 159
 160 STDPERIPH_DIR    = $(ROOT)/lib/main/STM32F10x_StdPeriph_Driver
 161
 162 STDPERIPH_SRC = $(notdir $(wildcard $(STDPERIPH_DIR)/src/*.c))
 163
 164 EXCLUDES        = stm32f10x_crc.c \
 165                 stm32f10x_cec.c \
 166                 stm32f10x_can.c
 167
 168 STDPERIPH_SRC := $(filter-out ${EXCLUDES}, $(STDPERIPH_SRC))
 169
 170 # Search path and source files for the CMSIS sources
 171 VPATH           := $(VPATH):$(CMSIS_DIR)/CM3/CoreSupport:$(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x
 172 CMSIS_SRC        = $(notdir $(wildcard $(CMSIS_DIR)/CM3/CoreSupport/*.c \
 173                            $(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x/*.c))
 174
 175 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 176                    $(STDPERIPH_DIR)/inc \
 177                    $(CMSIS_DIR)/CM3/CoreSupport \
 178                    $(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x \
 179
 180 LD_SCRIPT        = $(LINKER_DIR)/stm32_flash_f103_$(FLASH_SIZE)k.ld
 181
 182 ARCH_FLAGS       = -mthumb -mcpu=cortex-m3
 183 TARGET_FLAGS = -D$(TARGET) -pedantic
 184 DEVICE_FLAGS = -DSTM32F10X_HD -DSTM32F10X
 185
 186 DEVICE_STDPERIPH_SRC = $(STDPERIPH_SRC)
 187
 188 else
 189
 190 STDPERIPH_DIR    = $(ROOT)/lib/main/STM32F10x_StdPeriph_Driver
 191
 192 STDPERIPH_SRC = $(notdir $(wildcard $(STDPERIPH_DIR)/src/*.c))
 193
 194 EXCLUDES        = stm32f10x_crc.c \
 195                 stm32f10x_cec.c \
 196                 stm32f10x_can.c
 197
 198 STDPERIPH_SRC := $(filter-out ${EXCLUDES}, $(STDPERIPH_SRC))
 199
 200 # Search path and source files for the CMSIS sources
 201 VPATH           := $(VPATH):$(CMSIS_DIR)/CM3/CoreSupport:$(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x
 202 CMSIS_SRC        = $(notdir $(wildcard $(CMSIS_DIR)/CM3/CoreSupport/*.c \
 203                            $(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x/*.c))
 204
 205 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 206                    $(STDPERIPH_DIR)/inc \
 207                    $(CMSIS_DIR)/CM3/CoreSupport \
 208                    $(CMSIS_DIR)/CM3/DeviceSupport/ST/STM32F10x \
 209
 210 DEVICE_STDPERIPH_SRC = $(STDPERIPH_SRC)
 211
 212 ifeq ($(TARGET),$(filter $(TARGET), $(VCP_VALID_TARGETS)))
 213 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 214                    $(USBFS_DIR)/inc \
 215                    $(ROOT)/src/main/vcp
 216
 217 VPATH := $(VPATH):$(USBFS_DIR)/src
 218
 219 DEVICE_STDPERIPH_SRC := $(DEVICE_STDPERIPH_SRC) \
 220                    $(USBPERIPH_SRC)
 221
 222 endif
 223
 224 LD_SCRIPT        = $(LINKER_DIR)/stm32_flash_f103_$(FLASH_SIZE)k.ld
 225
 226 ARCH_FLAGS       = -mthumb -mcpu=cortex-m3
 227 TARGET_FLAGS = -D$(TARGET) -pedantic
 228 DEVICE_FLAGS = -DSTM32F10X_MD -DSTM32F10X
 229
 230 endif
 231
 232 ifneq ($(FLASH_SIZE),)
 233 DEVICE_FLAGS := $(DEVICE_FLAGS) -DFLASH_SIZE=$(FLASH_SIZE)
 234 endif
 235
 236 TARGET_DIR = $(ROOT)/src/main/target/$(TARGET)
 237 TARGET_SRC = $(notdir $(wildcard $(TARGET_DIR)/*.c))
 238
 239 ifeq ($(TARGET),ALIENFLIGHTF1)
 240 # ALIENFLIGHTF1 is a VARIANT of NAZE
 241 TARGET_FLAGS := $(TARGET_FLAGS) -DNAZE -DALIENFLIGHT
 242 TARGET_DIR = $(ROOT)/src/main/target/NAZE
 243 endif
 244
 245 ifeq ($(TARGET),$(filter $(TARGET), $(CC3D_TARGETS)))
 246 TARGET_FLAGS := $(TARGET_FLAGS) -DCC3D
 247 TARGET_DIR = $(ROOT)/src/main/target/CC3D
 248 endif
 249
 250 ifneq ($(filter $(TARGET),$(OPBL_VALID_TARGETS)),)
 251 OPBL=yes
 252 endif
 253
 254 ifeq ($(OPBL),yes)
 255 ifneq ($(filter $(TARGET),$(OPBL_VALID_TARGETS)),)
 256 TARGET_FLAGS := -DOPBL $(TARGET_FLAGS)
 257 LD_SCRIPT        = $(LINKER_DIR)/stm32_flash_f103_$(FLASH_SIZE)k_opbl.ld
 258 .DEFAULT_GOAL := binary
 259 else
 260 $(error OPBL specified with a unsupported target)
 261 endif
 262 endif
 263
 264 ifeq ($(TARGET),AFROMINI)
 265 # AFROMINI is a VARIANT of NAZE being recognized as rev4, but needs to use rev5 config
 266 TARGET_FLAGS := $(TARGET_FLAGS) -DNAZE -DAFROMINI
 267 TARGET_DIR = $(ROOT)/src/main/target/NAZE
 268 endif
 269
 270 INCLUDE_DIRS := $(INCLUDE_DIRS) \
 271                     $(TARGET_DIR)
 272
 273 VPATH           := $(VPATH):$(TARGET_DIR)
 274
 275 COMMON_SRC = build_config.c \
 276                    debug.c \
 277                    version.c \
 278                    $(TARGET_SRC) \
 279                    config/config.c \
 280                    config/runtime_config.c \
 281                    common/maths.c \
 282                    common/printf.c \
 283                    common/typeconversion.c \
 284                    common/encoding.c \
 285                    common/filter.c \
 286                    scheduler.c \
 287                    main.c \
 288                    mw.c \
 289                    flight/altitudehold.c \
 290                    flight/failsafe.c \
 291                    flight/pid.c \
 292                    flight/imu.c \
 293                    flight/mixer.c \
 294                    drivers/bus_i2c_soft.c \
 295                    drivers/serial.c \
 296                    drivers/sound_beeper.c \
 297                    drivers/system.c \
 298                    drivers/gyro_sync.c \
 299                    drivers/dma.c \
 300                    drivers/buf_writer.c \
 301                    io/beeper.c \
 302                    io/rc_controls.c \
 303                    io/rc_curves.c \
 304                    io/serial.c \
 305                    io/serial_1wire.c \
 306                    io/serial_cli.c \
 307                    io/serial_msp.c \
 308                    io/statusindicator.c \
 309                    rx/rx.c \
 310                    rx/pwm.c \
 311                    rx/msp.c \
 312                    rx/sbus.c \
 313                    rx/sumd.c \
 314                    rx/sumh.c \
 315                    rx/spektrum.c \
 316                    rx/xbus.c \
 317                    rx/ibus.c \
 318            rx/jetiexbus.c \
 319                    sensors/acceleration.c \
 320                    sensors/battery.c \
 321                    sensors/boardalignment.c \
 322                    sensors/compass.c \
 323                    sensors/gyro.c \
 324                    sensors/initialisation.c \
 325                    $(CMSIS_SRC) \
 326                    $(DEVICE_STDPERIPH_SRC)
 327
 328 HIGHEND_SRC = \
 329                    flight/navigation.c \
 330                    flight/gps_conversion.c \
 331                    common/colorconversion.c \
 332                    io/gps.c \
 333                    io/ledstrip.c \
 334                    io/display.c \
 335                    telemetry/telemetry.c \
 336                    telemetry/frsky.c \
 337                    telemetry/hott.c \
 338                    telemetry/smartport.c \
 339                    telemetry/ltm.c \
 340                    sensors/sonar.c \
 341                    sensors/barometer.c \
 342                    blackbox/blackbox.c \
 343                    blackbox/blackbox_io.c
 344
 345 VCP_SRC = \
 346                    vcp/hw_config.c \
 347                    vcp/stm32_it.c \
 348                    vcp/usb_desc.c \
 349                    vcp/usb_endp.c \
 350                    vcp/usb_istr.c \
 351                    vcp/usb_prop.c \
 352                    vcp/usb_pwr.c \
 353                    drivers/serial_usb_vcp.c
 354
 355 NAZE_SRC = startup_stm32f10x_md_gcc.S \
 356                    drivers/accgyro_adxl345.c \
 357                    drivers/accgyro_bma280.c \
 358                    drivers/accgyro_l3g4200d.c \
 359                    drivers/accgyro_mma845x.c \
 360                    drivers/accgyro_mpu.c \
 361                    drivers/accgyro_mpu3050.c \
 362                    drivers/accgyro_mpu6050.c \
 363                    drivers/accgyro_mpu6500.c \
 364                    drivers/accgyro_spi_mpu6500.c \
 365                    drivers/adc.c \
 366                    drivers/adc_stm32f10x.c \
 367                    drivers/barometer_bmp085.c \
 368                    drivers/barometer_bmp280.c \
 369                    drivers/barometer_ms5611.c \
 370                    drivers/barometer_bmp280.c \
 371                    drivers/bus_spi.c \
 372                    drivers/bus_i2c_stm32f10x.c \
 373                    drivers/compass_hmc5883l.c \
 374                    drivers/display_ug2864hsweg01.h \
 375                    drivers/flash_m25p16.c \
 376                    drivers/gpio_stm32f10x.c \
 377                    drivers/inverter.c \
 378                    drivers/light_led_stm32f10x.c \
 379                    drivers/light_ws2811strip.c \
 380                    drivers/light_ws2811strip_stm32f10x.c \
 381                    drivers/sonar_hcsr04.c \
 382                    drivers/pwm_mapping.c \
 383                    drivers/pwm_output.c \
 384                    drivers/pwm_rx.c \
 385                    drivers/serial_softserial.c \
 386                    drivers/serial_uart.c \
 387                    drivers/serial_uart_stm32f10x.c \
 388                    drivers/sound_beeper_stm32f10x.c \
 389                    drivers/system_stm32f10x.c \
 390                    drivers/timer.c \
 391                    drivers/timer_stm32f10x.c \
 392                    io/flashfs.c \
 393                    hardware_revision.c \
 394                    $(HIGHEND_SRC) \
 395                    $(COMMON_SRC)
 396
 397 ALIENFLIGHTF1_SRC = $(NAZE_SRC)
 398
 399 AFROMINI_SRC = $(NAZE_SRC)
 400
 401 EUSTM32F103RC_SRC = startup_stm32f10x_hd_gcc.S \
 402                    drivers/accgyro_adxl345.c \
 403                    drivers/accgyro_bma280.c \
 404                    drivers/accgyro_l3g4200d.c \
 405                    drivers/accgyro_mma845x.c \
 406                    drivers/accgyro_mpu.c \
 407                    drivers/accgyro_mpu3050.c \
 408                    drivers/accgyro_mpu6050.c \
 409                    drivers/accgyro_spi_mpu6000.c \
 410                    drivers/accgyro_spi_mpu6500.c \
 411                    drivers/adc.c \
 412                    drivers/adc_stm32f10x.c \
 413                    drivers/barometer_bmp085.c \
 414                    drivers/barometer_bmp280.c \
 415                    drivers/barometer_ms5611.c \
 416                    drivers/bus_i2c_stm32f10x.c \
 417                    drivers/bus_spi.c \
 418                    drivers/compass_ak8975.c \
 419                    drivers/compass_hmc5883l.c \
 420                    drivers/display_ug2864hsweg01.c \
 421                    drivers/flash_m25p16.c \
 422                    drivers/gpio_stm32f10x.c \
 423                    drivers/inverter.c \
 424                    drivers/light_led_stm32f10x.c \
 425                    drivers/light_ws2811strip.c \
 426                    drivers/light_ws2811strip_stm32f10x.c \
 427                    drivers/pwm_mapping.c \
 428                    drivers/pwm_output.c \
 429                    drivers/pwm_rx.c \
 430                    drivers/serial_softserial.c \
 431                    drivers/serial_uart.c \
 432                    drivers/serial_uart_stm32f10x.c \
 433                    drivers/sonar_hcsr04.c \
 434                    drivers/sound_beeper_stm32f10x.c \
 435                    drivers/system_stm32f10x.c \
 436                    drivers/timer.c \
 437                    drivers/timer_stm32f10x.c \
 438                    io/flashfs.c \
 439                    $(HIGHEND_SRC) \
 440                    $(COMMON_SRC)
 441
 442 PORT103R_SRC = $(EUSTM32F103RC_SRC)
 443
 444 OLIMEXINO_SRC = startup_stm32f10x_md_gcc.S \
 445                    drivers/accgyro_mpu.c \
 446                    drivers/accgyro_mpu6050.c \
 447                    drivers/adc.c \
 448                    drivers/adc_stm32f10x.c \
 449                    drivers/barometer_bmp085.c \
 450                    drivers/barometer_bmp280.c \
 451                    drivers/bus_i2c_stm32f10x.c \
 452                    drivers/bus_spi.c \
 453                    drivers/compass_hmc5883l.c \
 454                    drivers/gpio_stm32f10x.c \
 455                    drivers/light_led_stm32f10x.c \
 456                    drivers/light_ws2811strip.c \
 457                    drivers/light_ws2811strip_stm32f10x.c \
 458                    drivers/pwm_mapping.c \
 459                    drivers/pwm_output.c \
 460                    drivers/pwm_rx.c \
 461                    drivers/serial_softserial.c \
 462                    drivers/serial_uart.c \
 463                    drivers/serial_uart_stm32f10x.c \
 464                    drivers/sonar_hcsr04.c \
 465                    drivers/sound_beeper_stm32f10x.c \
 466                    drivers/system_stm32f10x.c \
 467                    drivers/timer.c \
 468                    drivers/timer_stm32f10x.c \
 469                    $(HIGHEND_SRC) \
 470                    $(COMMON_SRC)
 471
 472 CJMCU_SRC = \
 473                    startup_stm32f10x_md_gcc.S \
 474                    drivers/adc.c \
 475                    drivers/adc_stm32f10x.c \
 476                    drivers/accgyro_mpu.c \
 477                    drivers/accgyro_mpu6050.c \
 478                    drivers/bus_i2c_stm32f10x.c \
 479                    drivers/compass_hmc5883l.c \
 480                    drivers/gpio_stm32f10x.c \
 481                    drivers/light_led_stm32f10x.c \
 482                    drivers/pwm_mapping.c \
 483                    drivers/pwm_output.c \
 484                    drivers/pwm_rx.c \
 485                    drivers/serial_uart.c \
 486                    drivers/serial_uart_stm32f10x.c \
 487                    drivers/sound_beeper_stm32f10x.c \
 488                    drivers/system_stm32f10x.c \
 489                    drivers/timer.c \
 490                    drivers/timer_stm32f10x.c \
 491                    hardware_revision.c \
 492                    flight/gtune.c \
 493                    blackbox/blackbox.c \
 494                    blackbox/blackbox_io.c \
 495                    $(COMMON_SRC)
 496
 497 CC3D_SRC = \
 498                    startup_stm32f10x_md_gcc.S \
 499                    drivers/accgyro_mpu.c \
 500                    drivers/accgyro_spi_mpu6000.c \
 501                    drivers/adc.c \
 502                    drivers/adc_stm32f10x.c \
 503                    drivers/barometer_bmp085.c \
 504                    drivers/barometer_bmp280.c \
 505                    drivers/barometer_ms5611.c \
 506                    drivers/bus_spi.c \
 507                    drivers/bus_i2c_stm32f10x.c \
 508                    drivers/compass_hmc5883l.c \
 509                    drivers/display_ug2864hsweg01.c \
 510                    drivers/flash_m25p16.c \
 511                    drivers/gpio_stm32f10x.c \
 512                    drivers/inverter.c \
 513                    drivers/light_led_stm32f10x.c \
 514                    drivers/light_ws2811strip.c \
 515                    drivers/light_ws2811strip_stm32f10x.c \
 516                    drivers/pwm_mapping.c \
 517                    drivers/pwm_output.c \
 518                    drivers/pwm_rx.c \
 519                    drivers/serial_softserial.c \
 520                    drivers/serial_uart.c \
 521                    drivers/serial_uart_stm32f10x.c \
 522                    drivers/sonar_hcsr04.c \
 523                    drivers/sound_beeper_stm32f10x.c \
 524                    drivers/system_stm32f10x.c \
 525                    drivers/timer.c \
 526                    drivers/timer_stm32f10x.c \
 527                    io/flashfs.c \
 528                    $(HIGHEND_SRC) \
 529                    $(COMMON_SRC) \
 530                    $(VCP_SRC)
 531
 532 STM32F30x_COMMON_SRC = \
 533                    startup_stm32f30x_md_gcc.S \
 534                    drivers/adc.c \
 535                    drivers/adc_stm32f30x.c \
 536                    drivers/bus_i2c_stm32f30x.c \
 537                    drivers/bus_spi.c \
 538                    drivers/display_ug2864hsweg01.h \
 539                    drivers/gpio_stm32f30x.c \
 540                    drivers/light_led_stm32f30x.c \
 541                    drivers/pwm_mapping.c \
 542                    drivers/pwm_output.c \
 543                    drivers/pwm_rx.c \
 544                    drivers/serial_uart.c \
 545                    drivers/serial_uart_stm32f30x.c \
 546                    drivers/sound_beeper_stm32f30x.c \
 547                    drivers/system_stm32f30x.c \
 548                    drivers/timer.c \
 549                    drivers/timer_stm32f30x.c
 550
 551 NAZE32PRO_SRC = \
 552                    $(STM32F30x_COMMON_SRC) \
 553                    $(HIGHEND_SRC) \
 554                    $(COMMON_SRC) \
 555                    $(VCP_SRC)
 556
 557 STM32F3DISCOVERY_COMMON_SRC = \
 558                    $(STM32F30x_COMMON_SRC) \
 559                    drivers/light_ws2811strip.c \
 560                    drivers/light_ws2811strip_stm32f30x.c \
 561                    drivers/accgyro_l3gd20.c \
 562                    drivers/accgyro_l3gd20.c \
 563                    drivers/accgyro_lsm303dlhc.c \
 564                    drivers/compass_hmc5883l.c \
 565                    $(VCP_SRC)
 566
 567 STM32F3DISCOVERY_SRC = \
 568                    $(STM32F3DISCOVERY_COMMON_SRC) \
 569                    drivers/accgyro_adxl345.c \
 570                    drivers/accgyro_bma280.c \
 571                    drivers/accgyro_mma845x.c \
 572                    drivers/accgyro_mpu.c \
 573                    drivers/accgyro_mpu3050.c \
 574                    drivers/accgyro_mpu6050.c \
 575                    drivers/accgyro_l3g4200d.c \
 576                    drivers/barometer_ms5611.c \
 577                    drivers/barometer_bmp280.c \
 578                    drivers/compass_ak8975.c \
 579                    drivers/sdcard.c \
 580                    drivers/sdcard_standard.c \
 581                    io/asyncfatfs/asyncfatfs.c \
 582                    io/asyncfatfs/fat_standard.c \
 583                    $(HIGHEND_SRC) \
 584                    $(COMMON_SRC)
 585
 586 CHEBUZZF3_SRC = \
 587                    $(STM32F3DISCOVERY_SRC) \
 588                    $(HIGHEND_SRC) \
 589                    $(COMMON_SRC)
 590
 591 COLIBRI_RACE_SRC = \
 592                    $(STM32F30x_COMMON_SRC) \
 593                    io/i2c_bst.c \
 594                    drivers/bus_bst_stm32f30x.c \
 595                    drivers/accgyro_mpu.c \
 596                    drivers/accgyro_mpu6500.c \
 597                    drivers/accgyro_spi_mpu6500.c \
 598                    drivers/accgyro_mpu6500.c \
 599                    drivers/barometer_ms5611.c \
 600                    drivers/compass_ak8975.c \
 601                    drivers/compass_hmc5883l.c \
 602                    drivers/display_ug2864hsweg01.c \
 603                    drivers/light_ws2811strip.c \
 604                    drivers/light_ws2811strip_stm32f30x.c \
 605                    drivers/serial_usb_vcp.c \
 606                    $(HIGHEND_SRC) \
 607                    $(COMMON_SRC) \
 608                    $(VCP_SRC)
 609
 610 LUX_RACE_SRC = \
 611                    $(STM32F30x_COMMON_SRC) \
 612                    drivers/accgyro_mpu.c \
 613                    drivers/accgyro_mpu6500.c \
 614                    drivers/accgyro_spi_mpu6500.c \
 615                    drivers/accgyro_mpu6500.c \
 616                    drivers/light_ws2811strip.c \
 617                    drivers/light_ws2811strip_stm32f30x.c \
 618                    drivers/serial_usb_vcp.c \
 619                    $(HIGHEND_SRC) \
 620                    $(COMMON_SRC) \
 621                    $(VCP_SRC)
 622
 623 SPARKY_SRC = \
 624                    $(STM32F30x_COMMON_SRC) \
 625                    drivers/display_ug2864hsweg01.c \
 626                    drivers/accgyro_mpu.c \
 627                    drivers/accgyro_mpu6050.c \
 628                    drivers/barometer_ms5611.c \
 629                    drivers/barometer_bmp280.c \
 630                    drivers/compass_ak8975.c \
 631                    drivers/light_ws2811strip.c \
 632                    drivers/light_ws2811strip_stm32f30x.c \
 633                    drivers/serial_usb_vcp.c \
 634                    $(HIGHEND_SRC) \
 635                    $(COMMON_SRC) \
 636                    $(VCP_SRC)
 637
 638 ALIENFLIGHTF3_SRC = \
 639                    $(STM32F30x_COMMON_SRC) \
 640                    drivers/accgyro_mpu.c \
 641                    drivers/accgyro_mpu6050.c \
 642                    drivers/accgyro_mpu.c \
 643                    drivers/accgyro_mpu6500.c \
 644                    drivers/accgyro_spi_mpu6500.c \
 645                    drivers/compass_ak8963.c \
 646                    hardware_revision.c \
 647                    drivers/serial_usb_vcp.c \
 648                    drivers/sonar_hcsr04.c \
 649                    $(HIGHEND_SRC) \
 650                    $(COMMON_SRC) \
 651                    $(VCP_SRC)
 652
 653 RMDO_SRC = \
 654                    $(STM32F30x_COMMON_SRC) \
 655                    drivers/accgyro_mpu.c \
 656                    drivers/accgyro_mpu6050.c \
 657                    drivers/barometer_bmp280.c \
 658                    drivers/display_ug2864hsweg01.h \
 659                    drivers/flash_m25p16.c \
 660                    drivers/light_ws2811strip.c \
 661                    drivers/light_ws2811strip_stm32f30x.c \
 662                    drivers/serial_softserial.c \
 663                    drivers/sonar_hcsr04.c \
 664                    io/flashfs.c \
 665                    $(HIGHEND_SRC) \
 666                    $(COMMON_SRC)
 667
 668 SPRACINGF3_SRC = \
 669                    $(STM32F30x_COMMON_SRC) \
 670                    drivers/accgyro_mpu.c \
 671                    drivers/accgyro_mpu6050.c \
 672                    drivers/barometer_ms5611.c \
 673                    drivers/compass_ak8975.c \
 674                    drivers/barometer_bmp085.c \
 675                    drivers/barometer_bmp280.c \
 676                    drivers/compass_hmc5883l.c \
 677                    drivers/display_ug2864hsweg01.h \
 678                    drivers/flash_m25p16.c \
 679                    drivers/light_ws2811strip.c \
 680                    drivers/light_ws2811strip_stm32f30x.c \
 681                    drivers/serial_softserial.c \
 682                    drivers/sonar_hcsr04.c \
 683                    io/flashfs.c \
 684                    $(HIGHEND_SRC) \
 685                    $(COMMON_SRC)
 686
 687 IRCFUSIONF3_SRC = \
 688                    $(STM32F30x_COMMON_SRC) \
 689                    drivers/accgyro_mpu.c \
 690                    drivers/accgyro_mpu6050.c \
 691                    drivers/barometer_ms5611.c \
 692                    drivers/compass_ak8975.c \
 693                    drivers/barometer_bmp085.c \
 694                    drivers/barometer_bmp280.c \
 695                    drivers/compass_hmc5883l.c \
 696                    drivers/display_ug2864hsweg01.h \
 697                    drivers/flash_m25p16.c \
 698                    drivers/light_ws2811strip.c \
 699                    drivers/light_ws2811strip_stm32f30x.c \
 700                    drivers/serial_softserial.c \
 701                    drivers/sonar_hcsr04.c \
 702                    io/flashfs.c \
 703                    $(HIGHEND_SRC) \
 704                    $(COMMON_SRC)
 705
 706 MOTOLAB_SRC = \
 707                    $(STM32F30x_COMMON_SRC) \
 708                    drivers/accgyro_mpu.c \
 709                    drivers/display_ug2864hsweg01.c \
 710                    drivers/accgyro_mpu6050.c \
 711                    drivers/accgyro_spi_mpu6000.c \
 712                    drivers/barometer_ms5611.c \
 713                    drivers/compass_hmc5883l.c \
 714                    drivers/light_ws2811strip.c \
 715                    drivers/light_ws2811strip_stm32f30x.c \
 716                    drivers/serial_softserial.c \
 717                    drivers/serial_usb_vcp.c \
 718                    drivers/flash_m25p16.c \
 719                    io/flashfs.c \
 720                    $(HIGHEND_SRC) \
 721                    $(COMMON_SRC) \
 722                    $(VCP_SRC)
 723
 724 SPRACINGF3MINI_SRC       = \
 725                    $(STM32F30x_COMMON_SRC) \
 726                    drivers/accgyro_mpu.c \
 727                    drivers/accgyro_mpu6500.c \
 728                    drivers/barometer_bmp280.c \
 729                    drivers/compass_ak8975.c \
 730                    drivers/compass_hmc5883l.c \
 731                    drivers/display_ug2864hsweg01.h \
 732                    drivers/flash_m25p16.c \
 733                    drivers/light_ws2811strip.c \
 734                    drivers/light_ws2811strip_stm32f30x.c \
 735                    drivers/serial_softserial.c \
 736                    drivers/serial_usb_vcp.c \
 737                    drivers/sonar_hcsr04.c \
 738                    drivers/sdcard.c \
 739                    drivers/sdcard_standard.c \
 740                    drivers/transponder_ir.c \
 741                    drivers/transponder_ir_stm32f30x.c \
 742                    io/asyncfatfs/asyncfatfs.c \
 743                    io/asyncfatfs/fat_standard.c \
 744                    io/transponder_ir.c \
 745                    $(HIGHEND_SRC) \
 746                    $(COMMON_SRC) \
 747                    $(VCP_SRC)
 748 #                  $(FATFS_SRC)
 749
 750 # Search path and source files for the ST stdperiph library
 751 VPATH           := $(VPATH):$(STDPERIPH_DIR)/src
 752
 753 ###############################################################################
 754 # Things that might need changing to use different tools
 755 #
 756
 757 # Tool names
 758 CC               = arm-none-eabi-gcc
 759 OBJCOPY          = arm-none-eabi-objcopy
 760 SIZE             = arm-none-eabi-size
 761
 762 #
 763 # Tool options.
 764 #
 765
 766 ifeq ($(DEBUG),GDB)
 767 OPTIMIZE         = -O0
 768 LTO_FLAGS        = $(OPTIMIZE)
 769 else
 770 OPTIMIZE         = -Os
 771 LTO_FLAGS        = -flto -fuse-linker-plugin $(OPTIMIZE)
 772 endif
 773
 774 DEBUG_FLAGS      = -ggdb3 -DDEBUG
 775
 776 CFLAGS           = $(ARCH_FLAGS) \
 777                    $(LTO_FLAGS) \
 778                    $(addprefix -D,$(OPTIONS)) \
 779                    $(addprefix -I,$(INCLUDE_DIRS)) \
 780                    $(DEBUG_FLAGS) \
 781                    -std=gnu99 \
 782                    -Wall -Wextra -Wunsafe-loop-optimizations -Wdouble-promotion \
 783                    -ffunction-sections \
 784                    -fdata-sections \
 785                    $(DEVICE_FLAGS) \
 786                    -DUSE_STDPERIPH_DRIVER \
 787                    $(TARGET_FLAGS) \
 788                    -D'__FORKNAME__="$(FORKNAME)"' \
 789                    -D'__TARGET__="$(TARGET)"' \
 790                    -D'__REVISION__="$(REVISION)"' \
 791                    -save-temps=obj \
 792                    -MMD -MP
 793
 794 ASFLAGS          = $(ARCH_FLAGS) \
 795                    -x assembler-with-cpp \
 796                    $(addprefix -I,$(INCLUDE_DIRS)) \
 797                   -MMD -MP
 798
 799 LDFLAGS          = -lm \
 800                    -nostartfiles \
 801                    --specs=nano.specs \
 802                    -lc \
 803                    -lnosys \
 804                    $(ARCH_FLAGS) \
 805                    $(LTO_FLAGS) \
 806                    $(DEBUG_FLAGS) \
 807                    -static \
 808                    -Wl,-gc-sections,-Map,$(TARGET_MAP) \
 809                    -Wl,-L$(LINKER_DIR) \
 810            -Wl,--cref \
 811                    -T$(LD_SCRIPT)
 812
 813 ###############################################################################
 814 # No user-serviceable parts below
 815 ###############################################################################
 816
 817 CPPCHECK         = cppcheck $(CSOURCES) --enable=all --platform=unix64 \
 818                    --std=c99 --inline-suppr --quiet --force \
 819                    $(addprefix -I,$(INCLUDE_DIRS)) \
 820                    -I/usr/include -I/usr/include/linux
 821
 822 #
 823 # Things we will build
 824 #
 825 ifeq ($(filter $(TARGET),$(VALID_TARGETS)),)
 826 $(error Target '$(TARGET)' is not valid, must be one of $(VALID_TARGETS))
 827 endif
 828
 829 CC3D_OPBL_SRC     = $(CC3D_SRC)
 830
 831 TARGET_BIN       = $(BIN_DIR)/$(FORKNAME)_$(FC_VER)_$(TARGET).bin
 832 TARGET_HEX       = $(BIN_DIR)/$(FORKNAME)_$(FC_VER)_$(TARGET).hex
 833 TARGET_ELF       = $(OBJECT_DIR)/$(FORKNAME)_$(TARGET).elf
 834 TARGET_OBJS      = $(addsuffix .o,$(addprefix $(OBJECT_DIR)/$(TARGET)/,$(basename $($(TARGET)_SRC))))
 835 TARGET_DEPS      = $(addsuffix .d,$(addprefix $(OBJECT_DIR)/$(TARGET)/,$(basename $($(TARGET)_SRC))))
 836 TARGET_MAP       = $(OBJECT_DIR)/$(FORKNAME)_$(TARGET).map
 837
 838
 839 ifeq ($(OPBL),yes)
 840 CLEAN_ARTIFACTS := $(TARGET_BIN)
 841 else
 842 CLEAN_ARTIFACTS := $(TARGET_HEX)
 843 endif
 844 CLEAN_ARTIFACTS += $(TARGET_ELF) $(TARGET_OBJS) $(TARGET_MAP)
 845
 846 # List of buildable ELF files and their object dependencies.
 847 # It would be nice to compute these lists, but that seems to be just beyond make.
 848
 849 $(TARGET_HEX): $(TARGET_ELF)
 850         $(OBJCOPY) -O ihex --set-start 0x8000000 $< $@
 851
 852 $(TARGET_BIN): $(TARGET_ELF)
 853         $(OBJCOPY) -O binary $< $@
 854
 855 $(TARGET_ELF):  $(TARGET_OBJS)
 856         $(CC) -o $@ $^ $(LDFLAGS)
 857         $(SIZE) $(TARGET_ELF)
 858
 859 # Compile
 860 $(OBJECT_DIR)/$(TARGET)/%.o: %.c
 861         @mkdir -p $(dir $@)
 862         @echo %% $(notdir $<)
 863         @$(CC) -c -o $@ $(CFLAGS) $<
 864
 865 # Assemble
 866 $(OBJECT_DIR)/$(TARGET)/%.o: %.s
 867         @mkdir -p $(dir $@)
 868         @echo %% $(notdir $<)
 869         @$(CC) -c -o $@ $(ASFLAGS) $<
 870
 871 $(OBJECT_DIR)/$(TARGET)/%.o: %.S
 872         @mkdir -p $(dir $@)
 873         @echo %% $(notdir $<)
 874         @$(CC) -c -o $@ $(ASFLAGS) $<
 875
 876
 877 ## all         : default task; compile C code, build firmware
 878 all: binary
 879
 880 ## clean       : clean up all temporary / machine-generated files
 881 clean:
 882         rm -f $(CLEAN_ARTIFACTS)
 883         rm -rf $(OBJECT_DIR)/$(TARGET)
 884         cd src/test && $(MAKE) clean || true
 885
 886 flash_$(TARGET): $(TARGET_HEX)
 887         stty -F $(SERIAL_DEVICE) raw speed 115200 -crtscts cs8 -parenb -cstopb -ixon
 888         echo -n 'R' >$(SERIAL_DEVICE)
 889         stm32flash -w $(TARGET_HEX) -v -g 0x0 -b 115200 $(SERIAL_DEVICE)
 890
 891 ## flash       : flash firmware (.hex) onto flight controller
 892 flash: flash_$(TARGET)
 893
 894 st-flash_$(TARGET): $(TARGET_BIN)
 895         st-flash --reset write $< 0x08000000
 896
 897 ## st-flash    : flash firmware (.bin) onto flight controller
 898 st-flash: st-flash_$(TARGET)
 899
 900 binary: $(TARGET_BIN)
 901 hex:    $(TARGET_HEX)
 902
 903 unbrick_$(TARGET): $(TARGET_HEX)
 904         stty -F $(SERIAL_DEVICE) raw speed 115200 -crtscts cs8 -parenb -cstopb -ixon
 905         stm32flash -w $(TARGET_HEX) -v -g 0x0 -b 115200 $(SERIAL_DEVICE)
 906
 907 ## unbrick     : unbrick flight controller
 908 unbrick: unbrick_$(TARGET)
 909
 910 ## cppcheck    : run static analysis on C source code
 911 cppcheck: $(CSOURCES)
 912         $(CPPCHECK)
 913
 914 cppcheck-result.xml: $(CSOURCES)
 915         $(CPPCHECK) --xml-version=2 2> cppcheck-result.xml
 916
 917 ## help        : print this help message and exit
 918 help: Makefile
 919         @echo ""
 920         @echo "Makefile for the $(FORKNAME) firmware"
 921         @echo ""
 922         @echo "Usage:"
 923         @echo "        make [TARGET=<target>] [OPTIONS=\"<options>\"]"
 924         @echo ""
 925         @echo "Valid TARGET values are: $(VALID_TARGETS)"
 926         @echo ""
 927         @sed -n 's/^## //p' $<
 928
 929 ## test        : run the cleanflight test suite
 930 test:
 931         cd src/test && $(MAKE) test || true
 932
 933 # rebuild everything when makefile changes
 934 $(TARGET_OBJS) : Makefile
 935
 936 # include auto-generated dependencies
 937 -include $(TARGET_DEPS)