src/main/drivers/rx/rx_sx127x.h

   1 /*
   2  * This file is part of Cleanflight and Betaflight.
   3  *
   4  * Cleanflight and Betaflight are free software. You can redistribute
   5  * this software and/or modify this software under the terms of the
   6  * GNU General Public License as published by the Free Software
   7  * Foundation, either version 3 of the License, or (at your option)
   8  * any later version.
   9  *
  10  * Cleanflight and Betaflight are distributed in the hope that they
  11  * will be useful, but WITHOUT ANY WARRANTY; without even the implied
  12  * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  13  * See the GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this software.
  17  *
  18  * If not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 /*
  22  * Based on https://github.com/ExpressLRS/ExpressLRS
  23  * Thanks to AlessandroAU, original creator of the ExpressLRS project.
  24  */
  25
  26 #pragma once
  27
  28 //SX127x_ModulationModes
  29 typedef enum {
  30     SX127x_OPMODE_FSK_OOK = 0x00,
  31     SX127x_OPMODE_LORA = 0x80,
  32     SX127X_ACCESS_SHARED_REG_OFF = 0x00,
  33     SX127X_ACCESS_SHARED_REG_ON = 0x40,
  34 } sx127xModulationMode_e;
  35
  36 //SX127x_RadioOPmodes
  37 typedef enum {
  38     SX127x_OPMODE_SLEEP = 0x00,
  39     SX127x_OPMODE_STANDBY = 0x01,
  40     SX127x_OPMODE_FSTX = 0x02,
  41     SX127x_OPMODE_TX = 0x03,
  42     SX127x_OPMODE_FSRX = 0x04,
  43     SX127x_OPMODE_RXCONTINUOUS = 0x05,
  44     SX127x_OPMODE_RXSINGLE = 0x06,
  45     SX127x_OPMODE_CAD = 0x07,
  46 } sx127xRadioOpMode_e;
  47
  48 //SX127x_Bandwidth
  49 typedef enum {
  50     SX127x_BW_7_80_KHZ = 0x00,
  51     SX127x_BW_10_40_KHZ = 0x10,
  52     SX127x_BW_15_60_KHZ = 0x20,
  53     SX127x_BW_20_80_KHZ = 0x30,
  54     SX127x_BW_31_25_KHZ = 0x40,
  55     SX127x_BW_41_70_KHZ = 0x50,
  56     SX127x_BW_62_50_KHZ = 0x60,
  57     SX127x_BW_125_00_KHZ = 0x70,
  58     SX127x_BW_250_00_KHZ = 0x80,
  59     SX127x_BW_500_00_KHZ = 0x90,
  60 } sx127xBandwidth_e;
  61
  62 //SX127x_SpreadingFactor
  63 typedef enum {
  64     SX127x_SF_6 = 0x60,
  65     SX127x_SF_7 = 0x70,
  66     SX127x_SF_8 = 0x80,
  67     SX127x_SF_9 = 0x90,
  68     SX127x_SF_10 = 0xA0,
  69     SX127x_SF_11 = 0xB0,
  70     SX127x_SF_12 = 0xC0,
  71 } sx127xSpreadingFactor_e;
  72
  73 //SX127x_CodingRate
  74 typedef enum {
  75     SX127x_CR_4_5 = 0x02,
  76     SX127x_CR_4_6 = 0x04,
  77     SX127x_CR_4_7 = 0x06,
  78     SX127x_CR_4_8 = 0x08,
  79 } sx127xCodingRate_e;
  80
  81 // SX127x series common registers
  82 #define SX127X_REG_FIFO 0x00
  83 #define SX127X_REG_OP_MODE 0x01
  84 #define SX127X_REG_FRF_MSB 0x06
  85 #define SX127X_REG_FRF_MID 0x07
  86 #define SX127X_REG_FRF_LSB 0x08
  87 #define SX127X_REG_PA_CONFIG 0x09
  88 #define SX127X_REG_PA_RAMP 0x0A
  89 #define SX127X_REG_OCP 0x0B
  90 #define SX127X_REG_LNA 0x0C
  91 #define SX127X_REG_FIFO_ADDR_PTR 0x0D
  92 #define SX127X_REG_FIFO_TX_BASE_ADDR 0x0E
  93 #define SX127X_REG_FIFO_RX_BASE_ADDR 0x0F
  94 #define SX127X_REG_FIFO_RX_CURRENT_ADDR 0x10
  95 #define SX127X_REG_IRQ_FLAGS_MASK 0x11
  96 #define SX127X_REG_IRQ_FLAGS 0x12
  97 #define SX127X_REG_RX_NB_BYTES 0x13
  98 #define SX127X_REG_RX_HEADER_CNT_VALUE_MSB 0x14
  99 #define SX127X_REG_RX_HEADER_CNT_VALUE_LSB 0x15
 100 #define SX127X_REG_RX_PACKET_CNT_VALUE_MSB 0x16
 101 #define SX127X_REG_RX_PACKET_CNT_VALUE_LSB 0x17
 102 #define SX127X_REG_MODEM_STAT 0x18
 103 #define SX127X_REG_PKT_SNR_VALUE 0x19
 104 #define SX127X_REG_PKT_RSSI_VALUE 0x1A
 105 #define SX127X_REG_RSSI_VALUE 0x1B
 106 #define SX127X_REG_HOP_CHANNEL 0x1C
 107 #define SX127X_REG_MODEM_CONFIG_1 0x1D
 108 #define SX127X_REG_MODEM_CONFIG_2 0x1E
 109 #define SX127X_REG_SYMB_TIMEOUT_LSB 0x1F
 110 #define SX127X_REG_PREAMBLE_MSB 0x20
 111 #define SX127X_REG_PREAMBLE_LSB 0x21
 112 #define SX127X_REG_PAYLOAD_LENGTH 0x22
 113 #define SX127X_REG_MAX_PAYLOAD_LENGTH 0x23
 114 #define SX127X_REG_HOP_PERIOD 0x24
 115 #define SX127X_REG_FIFO_RX_BYTE_ADDR 0x25
 116 #define SX127X_REG_FEI_MSB 0x28
 117 #define SX127X_REG_FEI_MID 0x29
 118 #define SX127X_REG_FEI_LSB 0x2A
 119 #define SX127X_REG_RSSI_WIDEBAND 0x2C
 120 #define SX127X_REG_DETECT_OPTIMIZE 0x31
 121 #define SX127X_REG_INVERT_IQ 0x33
 122 #define SX127X_REG_DETECTION_THRESHOLD 0x37
 123 #define SX127X_REG_SYNC_WORD 0x39
 124 #define SX127X_REG_DIO_MAPPING_1 0x40
 125 #define SX127X_REG_DIO_MAPPING_2 0x41
 126 #define SX127X_REG_VERSION 0x42
 127
 128 // SX127X_REG_PA_CONFIG
 129 #define SX127X_PA_SELECT_RFO 0x00    //  7     7     RFO pin output, power limited to +14 dBm
 130 #define SX127X_PA_SELECT_BOOST 0x80  //  7     7     PA_BOOST pin output, power limited to +20 dBm
 131 #define SX127X_OUTPUT_POWER 0x0F     //  3     0     output power: P_out = 17 - (15 - OUTPUT_POWER) [dBm] for PA_SELECT_BOOST
 132 #define SX127X_MAX_OUTPUT_POWER 0x70 //              Enable max output power
 133
 134 // SX127X_REG_OCP
 135 #define SX127X_OCP_OFF 0x00   //  5     5     PA overload current protection disabled
 136 #define SX127X_OCP_ON 0x20    //  5     5     PA overload current protection enabled
 137 #define SX127X_OCP_TRIM 0x0B  //  4     0     OCP current: I_max(OCP_TRIM = 0b1011) = 100 mA
 138 #define SX127X_OCP_150MA 0x12 //  4     0     OCP current: I_max(OCP_TRIM = 10010) = 150 mA
 139
 140 // SX127X_REG_LNA
 141 #define SX127X_LNA_GAIN_0 0x00    //  7     5     LNA gain setting:   not used
 142 #define SX127X_LNA_GAIN_1 0x20    //  7     5                         max gain
 143 #define SX127X_LNA_GAIN_2 0x40    //  7     5                         .
 144 #define SX127X_LNA_GAIN_3 0x60    //  7     5                         .
 145 #define SX127X_LNA_GAIN_4 0x80    //  7     5                         .
 146 #define SX127X_LNA_GAIN_5 0xA0    //  7     5                         .
 147 #define SX127X_LNA_GAIN_6 0xC0    //  7     5                         min gain
 148 #define SX127X_LNA_GAIN_7 0xE0    //  7     5                         not used
 149 #define SX127X_LNA_BOOST_OFF 0x00 //  1     0     default LNA current
 150 #define SX127X_LNA_BOOST_ON 0x03  //  1     0     150% LNA current
 151
 152 #define SX127X_TX_MODE_SINGLE 0x00 //  3     3     single TX
 153 #define SX127X_TX_MODE_CONT 0x08   //  3     3     continuous TX
 154 #define SX127X_RX_TIMEOUT_MSB 0x00 //  1     0
 155
 156 // SX127X_REG_SYMB_TIMEOUT_LSB
 157 #define SX127X_RX_TIMEOUT_LSB 0x64 //  7     0     10 bit RX operation timeout
 158
 159 // SX127X_REG_PREAMBLE_MSB + REG_PREAMBLE_LSB
 160 #define SX127X_PREAMBLE_LENGTH_MSB 0x00 //  7     0     2 byte preamble length setting: l_P = PREAMBLE_LENGTH + 4.25
 161 #define SX127X_PREAMBLE_LENGTH_LSB 0x08 //  7     0         where l_p = preamble length
 162 //#define SX127X_PREAMBLE_LENGTH_LSB                    0x04  //  7     0         where l_p = preamble length  //CHANGED
 163
 164 // SX127X_REG_DETECT_OPTIMIZE
 165 #define SX127X_DETECT_OPTIMIZE_SF_6 0x05    //  2     0     SF6 detection optimization
 166 #define SX127X_DETECT_OPTIMIZE_SF_7_12 0x03 //  2     0     SF7 to SF12 detection optimization
 167
 168 // SX127X_REG_DETECTION_THRESHOLD
 169 #define SX127X_DETECTION_THRESHOLD_SF_6 0x0C    //  7     0     SF6 detection threshold
 170 #define SX127X_DETECTION_THRESHOLD_SF_7_12 0x0A //  7     0     SF7 to SF12 detection threshold
 171
 172 // SX127X_REG_PA_DAC
 173 #define SX127X_PA_BOOST_OFF 0x04 //  2     0     PA_BOOST disabled
 174 #define SX127X_PA_BOOST_ON 0x07  //  2     0     +20 dBm on PA_BOOST when OUTPUT_POWER = 0b1111
 175
 176 // SX127X_REG_HOP_PERIOD
 177 #define SX127X_HOP_PERIOD_OFF 0x00 //  7     0     number of periods between frequency hops; 0 = disabled
 178 #define SX127X_HOP_PERIOD_MAX 0xFF //  7     0
 179
 180 // SX127X_REG_DIO_MAPPING_1
 181 #define SX127X_DIO0_RX_DONE 0x00             //  7     6
 182 #define SX127X_DIO0_TX_DONE 0x40             //  7     6
 183 #define SX127X_DIO0_CAD_DONE 0x80            //  7     6
 184 #define SX127X_DIO1_RX_TIMEOUT 0x00          //  5     4
 185 #define SX127X_DIO1_FHSS_CHANGE_CHANNEL 0x10 //  5     4
 186 #define SX127X_DIO1_CAD_DETECTED 0x20        //  5     4
 187
 188 // SX127X_REG_IRQ_FLAGS
 189 #define SX127X_CLEAR_IRQ_FLAG_RX_TIMEOUT 0x80          //  7     7     timeout
 190 #define SX127X_CLEAR_IRQ_FLAG_RX_DONE 0x40             //  6     6     packet reception complete
 191 #define SX127X_CLEAR_IRQ_FLAG_PAYLOAD_CRC_ERROR 0x20   //  5     5     payload CRC error
 192 #define SX127X_CLEAR_IRQ_FLAG_VALID_HEADER 0x10        //  4     4     valid header received
 193 #define SX127X_CLEAR_IRQ_FLAG_TX_DONE 0x08             //  3     3     payload transmission complete
 194 #define SX127X_CLEAR_IRQ_FLAG_CAD_DONE 0x04            //  2     2     CAD complete
 195 #define SX127X_CLEAR_IRQ_FLAG_FHSS_CHANGE_CHANNEL 0x02 //  1     1     FHSS change channel
 196 #define SX127X_CLEAR_IRQ_FLAG_CAD_DETECTED 0x01        //  0     0     valid LoRa signal detected during CAD operation
 197
 198 // SX127X_REG_IRQ_FLAGS_MASK
 199 #define SX127X_MASK_IRQ_FLAG_RX_TIMEOUT 0x7F          //  7     7     timeout
 200 #define SX127X_MASK_IRQ_FLAG_RX_DONE 0xBF             //  6     6     packet reception complete
 201 #define SX127X_MASK_IRQ_FLAG_PAYLOAD_CRC_ERROR 0xDF   //  5     5     payload CRC error
 202 #define SX127X_MASK_IRQ_FLAG_VALID_HEADER 0xEF        //  4     4     valid header received
 203 #define SX127X_MASK_IRQ_FLAG_TX_DONE 0xF7             //  3     3     payload transmission complete
 204 #define SX127X_MASK_IRQ_FLAG_CAD_DONE 0xFB            //  2     2     CAD complete
 205 #define SX127X_MASK_IRQ_FLAG_FHSS_CHANGE_CHANNEL 0xFD //  1     1     FHSS change channel
 206 #define SX127X_MASK_IRQ_FLAG_CAD_DETECTED 0xFE        //  0     0     valid LoRa signal detected during CAD operation
 207
 208 // SX127X_REG_FIFO_TX_BASE_ADDR
 209 #define SX127X_FIFO_TX_BASE_ADDR_MAX 0x00 //  7     0     allocate the entire FIFO buffer for TX only
 210
 211 // SX127X_REG_FIFO_RX_BASE_ADDR
 212 #define SX127X_FIFO_RX_BASE_ADDR_MAX 0x00 //  7     0     allocate the entire FIFO buffer for RX only
 213
 214 // SX127X_REG_SYNC_WORD
 215 //#define SX127X_SYNC_WORD 0xC8 //  200   0     default ExpressLRS sync word - 200Hz
 216 #define SX127X_SYNC_WORD 0x12         //  18    0     default LoRa sync word
 217 #define SX127X_SYNC_WORD_LORAWAN 0x34 //  52    0     sync word reserved for LoRaWAN networks
 218
 219 ///Added by Sandro
 220 #define SX127x_TXCONTINUOUSMODE_MASK 0xF7
 221 #define SX127x_TXCONTINUOUSMODE_ON 0x08
 222 #define SX127x_TXCONTINUOUSMODE_OFF 0x00
 223 #define SX127x_PPMOFFSET 0x27
 224
 225 ///// SX1278 Regs /////
 226 //SX1278 specific register map
 227 #define SX1278_REG_MODEM_CONFIG_3 0x26
 228 #define SX1278_REG_TCXO 0x4B
 229 #define SX1278_REG_PA_DAC 0x4D
 230 #define SX1278_REG_FORMER_TEMP 0x5D
 231 #define SX1278_REG_AGC_REF 0x61
 232 #define SX1278_REG_AGC_THRESH_1 0x62
 233 #define SX1278_REG_AGC_THRESH_2 0x63
 234 #define SX1278_REG_AGC_THRESH_3 0x64
 235 #define SX1278_REG_PLL 0x70
 236
 237 //SX1278 LoRa modem settings
 238 //SX1278_REG_OP_MODE                                                  MSB   LSB   DESCRIPTION
 239 #define SX1278_HIGH_FREQ 0x00 //  3     3     access HF test registers
 240 #define SX1278_LOW_FREQ 0x08  //  3     3     access LF test registers
 241
 242 //SX1278_REG_FRF_MSB + REG_FRF_MID + REG_FRF_LSB
 243 #define SX1278_FRF_MSB 0x6C //  7     0     carrier frequency setting: f_RF = (F(XOSC) * FRF)/2^19
 244 #define SX1278_FRF_MID 0x80 //  7     0         where F(XOSC) = 32 MHz
 245 #define SX1278_FRF_LSB 0x00 //  7     0               FRF = 3 byte value of FRF registers
 246
 247 //SX1278_REG_PA_CONFIG
 248 #define SX1278_MAX_POWER 0x70 //  6     4     max power: P_max = 10.8 + 0.6*MAX_POWER [dBm]; P_max(MAX_POWER = 0b111) = 15 dBm
 249 //#define SX1278_MAX_POWER                              0x10  //  6     4     changed
 250
 251 //SX1278_REG_LNA
 252 #define SX1278_LNA_BOOST_LF_OFF 0x00 //  4     3     default LNA current
 253
 254 #define SX1278_HEADER_EXPL_MODE 0x00 //  0     0     explicit header mode
 255 #define SX1278_HEADER_IMPL_MODE 0x01 //  0     0     implicit header mode
 256
 257 //SX1278_REG_MODEM_CONFIG_2
 258 #define SX1278_RX_CRC_MODE_OFF 0x00 //  2     2     CRC disabled
 259 #define SX1278_RX_CRC_MODE_ON 0x04  //  2     2     CRC enabled
 260
 261 //SX1278_REG_MODEM_CONFIG_3
 262 #define SX1278_LOW_DATA_RATE_OPT_OFF 0x00 //  3     3     low data rate optimization disabled
 263 #define SX1278_LOW_DATA_RATE_OPT_ON 0x08  //  3     3     low data rate optimization enabled
 264 #define SX1278_AGC_AUTO_OFF 0x00          //  2     2     LNA gain set by REG_LNA
 265 #define SX1278_AGC_AUTO_ON 0x04           //  2     2     LNA gain set by internal AGC loop
 266
 267 #define SX1276_HEADER_EXPL_MODE 0x00 //  0     0     explicit header mode
 268 #define SX1276_HEADER_IMPL_MODE 0x01 //  0     0     implicit header mode
 269
 270 #define SX127x_ERR_NONE 0x00
 271 #define SX127x_ERR_CHIP_NOT_FOUND 0x01
 272 #define SX127x_ERR_EEPROM_NOT_INITIALIZED 0x02
 273
 274 #define SX127x_ERR_PACKET_TOO_LONG 0x10
 275 #define SX127x_ERR_TX_TIMEOUT 0x11
 276
 277 #define SX127x_ERR_RX_TIMEOUT 0x20
 278 #define SX127x_ERR_CRC_MISMATCH 0x21
 279
 280 #define SX127x_ERR_INVALID_BANDWIDTH 0x30
 281 #define SX127x_ERR_INVALID_SPREADING_FACTOR 0x31
 282 #define SX127x_ERR_INVALID_CODING_RATE 0x32
 283 #define SX127x_ERR_INVALID_FREQUENCY 0x33
 284
 285 #define SX127x_ERR_INVALID_BIT_RANGE 0x40
 286
 287 #define SX127x_CHANNEL_FREE 0x50
 288 #define SX127x_PREAMBLE_DETECTED 0x51
 289
 290 #define SX127x_SPI_READ 0x00
 291 #define SX127x_SPI_WRITE 0x80
 292
 293 #define SX127x_MAX_POWER 0x0F //17dBm
 294
 295 #define SX127x_FREQ_STEP 61.03515625
 296
 297 #define SX127x_FREQ_CORRECTION_MAX ((int32_t)(100000 / SX127x_FREQ_STEP))
 298 #define SX127x_FREQ_CORRECTION_MIN ((int32_t)(-100000 / SX127x_FREQ_STEP))
 299
 300 bool sx127xInit(IO_t resetPin, IO_t busyPin);
 301 uint8_t sx127xISR(uint32_t *timeStamp);
 302 void sx127xWriteRegister(const uint8_t address, const uint8_t data);
 303 void sx127xWriteRegisterBurst(const uint8_t address, const uint8_t *data, const uint8_t length);
 304 uint8_t sx127xReadRegister(const uint8_t address);
 305 void sx127xReadRegisterBurst(const uint8_t address, uint8_t *data, const uint8_t length);
 306 uint8_t sx127xGetRegisterValue(const uint8_t reg, const uint8_t msb, const uint8_t lsb);
 307 uint8_t sx127xSetRegisterValue(const uint8_t reg, const uint8_t value, const uint8_t msb, const uint8_t lsb);
 308 void sx127xReadRegisterFIFO(uint8_t *data, const uint8_t length);
 309 void sx127xWriteRegisterFIFO(const uint8_t *data, const uint8_t length);
 310 void sx127xSetBandwidthCodingRate(const sx127xBandwidth_e bw, const sx127xCodingRate_e cr, const sx127xSpreadingFactor_e sf, const bool headerExplMode, const bool crcEnabled);
 311 void sx127xSetSyncWord(uint8_t syncWord);
 312 void sx127xSetMode(const sx127xRadioOpMode_e mode);
 313 void sx127xSetOutputPower(const uint8_t power);
 314 void sx127xSetPreambleLength(const uint8_t preambleLen);
 315 void sx127xSetSpreadingFactor(const sx127xSpreadingFactor_e sf);
 316 void sx127xSetFrequencyHZ(const uint32_t freq);
 317 void sx127xSetFrequencyReg(const uint32_t freq);
 318
 319 void sx127xTransmitData(const uint8_t *data, const uint8_t length);
 320 void sx127xReceiveData(uint8_t *data, const uint8_t length);
 321 void sx127xStartReceiving(void);
 322 void sx127xConfig(const sx127xBandwidth_e bw, const sx127xSpreadingFactor_e sf, const sx127xCodingRate_e cr, const uint32_t freq, const uint8_t preambleLen, const bool iqInverted);
 323
 324 uint32_t sx127xGetCurrBandwidth(const sx127xBandwidth_e bw);
 325 uint32_t sx127xGetCurrBandwidthNormalisedShifted(const sx127xBandwidth_e bw);
 326 void sx127xSetPPMoffsetReg(const int32_t offset, const uint32_t freq);
 327 int32_t sx127xGetFrequencyError(const sx127xBandwidth_e bw);
 328 void sx127xAdjustFrequency(int32_t offset, const uint32_t freq);
 329 uint8_t sx127xUnsignedGetLastPacketRSSI(void);
 330 int8_t sx127xGetLastPacketRSSI(void);
 331 int8_t sx127xGetCurrRSSI(void);
 332 int8_t sx127xGetLastPacketSNRRaw(void);
 333 uint8_t sx127xGetIrqFlags(void);
 334 void sx127xClearIrqFlags(void);
 335 uint8_t sx127xGetIrqReason(void);
 336 void sx127xGetLastPacketStats(int8_t *rssi, int8_t *snr);
 337
 338 void sx127xConfigLoraDefaults(const bool iqInverted);