* configure.ac, NEWS: Bump version to 1.9.2.
[automake.git] / lib / Automake / Makefile.in
blob83be0bb1070abcace6bb315dfcefddfe682a74d3
1 # Makefile.in generated by automake 1.9.2 from Makefile.am.
2 # @configure_input@
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13 # PARTICULAR PURPOSE.
15 @SET_MAKE@
17 srcdir = @srcdir@
18 top_srcdir = @top_srcdir@
19 VPATH = @srcdir@
20 pkgdatadir = $(datadir)/@PACKAGE@
21 pkglibdir = $(libdir)/@PACKAGE@
22 pkgincludedir = $(includedir)/@PACKAGE@
23 top_builddir = ../..
24 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
25 INSTALL = @INSTALL@
26 install_sh_DATA = $(install_sh) -c -m 644
27 install_sh_PROGRAM = $(install_sh) -c
28 install_sh_SCRIPT = $(install_sh) -c
29 INSTALL_HEADER = $(INSTALL_DATA)
30 transform = $(program_transform_name)
31 NORMAL_INSTALL = :
32 PRE_INSTALL = :
33 POST_INSTALL = :
34 NORMAL_UNINSTALL = :
35 PRE_UNINSTALL = :
36 POST_UNINSTALL = :
37 build_triplet = @build@
38 subdir = lib/Automake
39 DIST_COMMON = $(dist_perllib_DATA) $(srcdir)/Makefile.am \
40 $(srcdir)/Makefile.in
41 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42 am__aclocal_m4_deps = $(top_srcdir)/m4/amversion.m4 \
43 $(top_srcdir)/m4/auxdir.m4 $(top_srcdir)/m4/init.m4 \
44 $(top_srcdir)/m4/install-sh.m4 $(top_srcdir)/m4/lead-dot.m4 \
45 $(top_srcdir)/m4/missing.m4 $(top_srcdir)/m4/mkdirp.m4 \
46 $(top_srcdir)/m4/options.m4 $(top_srcdir)/m4/runlog.m4 \
47 $(top_srcdir)/m4/sanity.m4 $(top_srcdir)/m4/strip.m4 \
48 $(top_srcdir)/m4/tar.m4 $(top_srcdir)/configure.ac
49 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
50 $(ACLOCAL_M4)
51 mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
52 CONFIG_CLEAN_FILES =
53 SOURCES =
54 DIST_SOURCES =
55 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
56 html-recursive info-recursive install-data-recursive \
57 install-exec-recursive install-info-recursive \
58 install-recursive installcheck-recursive installdirs-recursive \
59 pdf-recursive ps-recursive uninstall-info-recursive \
60 uninstall-recursive
61 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
62 am__vpath_adj = case $$p in \
63 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
64 *) f=$$p;; \
65 esac;
66 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
67 am__installdirs = "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(perllibdir)"
68 dist_perllibDATA_INSTALL = $(INSTALL_DATA)
69 nodist_perllibDATA_INSTALL = $(INSTALL_DATA)
70 DATA = $(dist_perllib_DATA) $(nodist_perllib_DATA)
71 ETAGS = etags
72 CTAGS = ctags
73 DIST_SUBDIRS = $(SUBDIRS)
74 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
75 ACLOCAL = @ACLOCAL@
76 AMTAR = @AMTAR@
77 APIVERSION = @APIVERSION@
78 AUTOCONF = @AUTOCONF@
79 AUTOHEADER = @AUTOHEADER@
80 AUTOMAKE = @AUTOMAKE@
81 AWK = @AWK@
82 CYGPATH_W = @CYGPATH_W@
83 DEFS = @DEFS@
84 ECHO_C = @ECHO_C@
85 ECHO_N = @ECHO_N@
86 ECHO_T = @ECHO_T@
87 EGREP = @EGREP@
88 FGREP = @FGREP@
89 INSTALL_DATA = @INSTALL_DATA@
90 INSTALL_PROGRAM = @INSTALL_PROGRAM@
91 INSTALL_SCRIPT = @INSTALL_SCRIPT@
92 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
93 LIBOBJS = @LIBOBJS@
94 LIBS = @LIBS@
95 LN = @LN@
96 LTLIBOBJS = @LTLIBOBJS@
97 MAKEINFO = @MAKEINFO@
98 MODIFICATION_DELAY = @MODIFICATION_DELAY@
99 PACKAGE = @PACKAGE@
100 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
101 PACKAGE_NAME = @PACKAGE_NAME@
102 PACKAGE_STRING = @PACKAGE_STRING@
103 PACKAGE_TARNAME = @PACKAGE_TARNAME@
104 PACKAGE_VERSION = @PACKAGE_VERSION@
105 PATH_SEPARATOR = @PATH_SEPARATOR@
106 PERL = @PERL@
107 SET_MAKE = @SET_MAKE@
108 SHELL = @SHELL@
109 STRIP = @STRIP@
110 TEX = @TEX@
111 VERSION = @VERSION@
112 ac_ct_STRIP = @ac_ct_STRIP@
113 am__leading_dot = @am__leading_dot@
114 am__tar = @am__tar@
115 am__untar = @am__untar@
116 bindir = @bindir@
117 build = @build@
118 build_alias = @build_alias@
119 build_cpu = @build_cpu@
120 build_os = @build_os@
121 build_vendor = @build_vendor@
122 datadir = @datadir@
123 exec_prefix = @exec_prefix@
124 host_alias = @host_alias@
125 includedir = @includedir@
126 infodir = @infodir@
127 install_sh = @install_sh@
128 libdir = @libdir@
129 libexecdir = @libexecdir@
130 localstatedir = @localstatedir@
131 mandir = @mandir@
132 mkdir_p = @mkdir_p@
133 oldincludedir = @oldincludedir@
134 pkgvdatadir = @pkgvdatadir@
135 prefix = @prefix@
136 program_transform_name = @program_transform_name@
137 sbindir = @sbindir@
138 sharedstatedir = @sharedstatedir@
139 sysconfdir = @sysconfdir@
140 target_alias = @target_alias@
141 SUBDIRS = tests
142 perllibdir = $(pkgvdatadir)/Automake
143 dist_perllib_DATA = \
144 ChannelDefs.pm \
145 Channels.pm \
146 Condition.pm \
147 Configure_ac.pm \
148 DisjConditions.pm \
149 FileUtils.pm \
150 General.pm \
151 Item.pm \
152 ItemDef.pm \
153 Location.pm \
154 Options.pm \
155 Rule.pm \
156 RuleDef.pm \
157 Struct.pm \
158 Variable.pm \
159 VarDef.pm \
160 Version.pm \
161 XFile.pm \
162 Wrap.pm
164 nodist_perllib_DATA = \
165 Config.pm
167 CLEANFILES = $(nodist_perllib_DATA)
168 do_subst = in=`echo $@ | sed 's/\.[^.]*$$//'`; sed \
169 -e 's,[@]APIVERSION[@],$(APIVERSION),g' \
170 -e 's,[@]PACKAGE[@],$(PACKAGE),g' \
171 -e 's,[@]PERL[@],$(PERL),g' \
172 -e 's,[@]SHELL[@],$(SHELL),g' \
173 -e 's,[@]VERSION[@],$(VERSION),g' \
174 -e "s,[@]configure_input[@],Generated from $$in.in; do not edit by hand.,g" \
175 -e 's,[@]datadir[@],$(datadir),g'
177 EXTRA_DIST = Config.in
178 all: all-recursive
180 .SUFFIXES:
181 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
182 @for dep in $?; do \
183 case '$(am__configure_deps)' in \
184 *$$dep*) \
185 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
186 && exit 0; \
187 exit 1;; \
188 esac; \
189 done; \
190 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Automake/Makefile'; \
191 cd $(top_srcdir) && \
192 $(AUTOMAKE) --gnu lib/Automake/Makefile
193 .PRECIOUS: Makefile
194 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
195 @case '$?' in \
196 *config.status*) \
197 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
198 *) \
199 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
200 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
201 esac;
203 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
204 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
206 $(top_srcdir)/configure: $(am__configure_deps)
207 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
208 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
209 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
210 uninstall-info-am:
211 install-dist_perllibDATA: $(dist_perllib_DATA)
212 @$(NORMAL_INSTALL)
213 test -z "$(perllibdir)" || $(mkdir_p) "$(DESTDIR)$(perllibdir)"
214 @list='$(dist_perllib_DATA)'; for p in $$list; do \
215 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
216 f=$(am__strip_dir) \
217 echo " $(dist_perllibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(perllibdir)/$$f'"; \
218 $(dist_perllibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(perllibdir)/$$f"; \
219 done
221 uninstall-dist_perllibDATA:
222 @$(NORMAL_UNINSTALL)
223 @list='$(dist_perllib_DATA)'; for p in $$list; do \
224 f=$(am__strip_dir) \
225 echo " rm -f '$(DESTDIR)$(perllibdir)/$$f'"; \
226 rm -f "$(DESTDIR)$(perllibdir)/$$f"; \
227 done
228 install-nodist_perllibDATA: $(nodist_perllib_DATA)
229 @$(NORMAL_INSTALL)
230 test -z "$(perllibdir)" || $(mkdir_p) "$(DESTDIR)$(perllibdir)"
231 @list='$(nodist_perllib_DATA)'; for p in $$list; do \
232 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
233 f=$(am__strip_dir) \
234 echo " $(nodist_perllibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(perllibdir)/$$f'"; \
235 $(nodist_perllibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(perllibdir)/$$f"; \
236 done
238 uninstall-nodist_perllibDATA:
239 @$(NORMAL_UNINSTALL)
240 @list='$(nodist_perllib_DATA)'; for p in $$list; do \
241 f=$(am__strip_dir) \
242 echo " rm -f '$(DESTDIR)$(perllibdir)/$$f'"; \
243 rm -f "$(DESTDIR)$(perllibdir)/$$f"; \
244 done
246 # This directory's subdirectories are mostly independent; you can cd
247 # into them and run `make' without going through this Makefile.
248 # To change the values of `make' variables: instead of editing Makefiles,
249 # (1) if the variable is set in `config.status', edit `config.status'
250 # (which will cause the Makefiles to be regenerated when you run `make');
251 # (2) otherwise, pass the desired values on the `make' command line.
252 $(RECURSIVE_TARGETS):
253 @set fnord $$MAKEFLAGS; amf=$$2; \
254 dot_seen=no; \
255 target=`echo $@ | sed s/-recursive//`; \
256 list='$(SUBDIRS)'; for subdir in $$list; do \
257 echo "Making $$target in $$subdir"; \
258 if test "$$subdir" = "."; then \
259 dot_seen=yes; \
260 local_target="$$target-am"; \
261 else \
262 local_target="$$target"; \
263 fi; \
264 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
265 || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
266 done; \
267 if test "$$dot_seen" = "no"; then \
268 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
269 fi; test -z "$$fail"
271 mostlyclean-recursive clean-recursive distclean-recursive \
272 maintainer-clean-recursive:
273 @set fnord $$MAKEFLAGS; amf=$$2; \
274 dot_seen=no; \
275 case "$@" in \
276 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
277 *) list='$(SUBDIRS)' ;; \
278 esac; \
279 rev=''; for subdir in $$list; do \
280 if test "$$subdir" = "."; then :; else \
281 rev="$$subdir $$rev"; \
282 fi; \
283 done; \
284 rev="$$rev ."; \
285 target=`echo $@ | sed s/-recursive//`; \
286 for subdir in $$rev; do \
287 echo "Making $$target in $$subdir"; \
288 if test "$$subdir" = "."; then \
289 local_target="$$target-am"; \
290 else \
291 local_target="$$target"; \
292 fi; \
293 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
294 || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
295 done && test -z "$$fail"
296 tags-recursive:
297 list='$(SUBDIRS)'; for subdir in $$list; do \
298 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
299 done
300 ctags-recursive:
301 list='$(SUBDIRS)'; for subdir in $$list; do \
302 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
303 done
305 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
306 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
307 unique=`for i in $$list; do \
308 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
309 done | \
310 $(AWK) ' { files[$$0] = 1; } \
311 END { for (i in files) print i; }'`; \
312 mkid -fID $$unique
313 tags: TAGS
315 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
316 $(TAGS_FILES) $(LISP)
317 tags=; \
318 here=`pwd`; \
319 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
320 include_option=--etags-include; \
321 empty_fix=.; \
322 else \
323 include_option=--include; \
324 empty_fix=; \
325 fi; \
326 list='$(SUBDIRS)'; for subdir in $$list; do \
327 if test "$$subdir" = .; then :; else \
328 test ! -f $$subdir/TAGS || \
329 tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
330 fi; \
331 done; \
332 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
333 unique=`for i in $$list; do \
334 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
335 done | \
336 $(AWK) ' { files[$$0] = 1; } \
337 END { for (i in files) print i; }'`; \
338 if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
339 test -n "$$unique" || unique=$$empty_fix; \
340 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
341 $$tags $$unique; \
343 ctags: CTAGS
344 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
345 $(TAGS_FILES) $(LISP)
346 tags=; \
347 here=`pwd`; \
348 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
349 unique=`for i in $$list; do \
350 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
351 done | \
352 $(AWK) ' { files[$$0] = 1; } \
353 END { for (i in files) print i; }'`; \
354 test -z "$(CTAGS_ARGS)$$tags$$unique" \
355 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
356 $$tags $$unique
358 GTAGS:
359 here=`$(am__cd) $(top_builddir) && pwd` \
360 && cd $(top_srcdir) \
361 && gtags -i $(GTAGS_ARGS) $$here
363 distclean-tags:
364 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
366 distdir: $(DISTFILES)
367 @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
368 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
369 list='$(DISTFILES)'; for file in $$list; do \
370 case $$file in \
371 $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
372 $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
373 esac; \
374 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
375 dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
376 if test "$$dir" != "$$file" && test "$$dir" != "."; then \
377 dir="/$$dir"; \
378 $(mkdir_p) "$(distdir)$$dir"; \
379 else \
380 dir=''; \
381 fi; \
382 if test -d $$d/$$file; then \
383 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
384 cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
385 fi; \
386 cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
387 else \
388 test -f $(distdir)/$$file \
389 || cp -p $$d/$$file $(distdir)/$$file \
390 || exit 1; \
391 fi; \
392 done
393 list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
394 if test "$$subdir" = .; then :; else \
395 test -d "$(distdir)/$$subdir" \
396 || $(mkdir_p) "$(distdir)/$$subdir" \
397 || exit 1; \
398 distdir=`$(am__cd) $(distdir) && pwd`; \
399 top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
400 (cd $$subdir && \
401 $(MAKE) $(AM_MAKEFLAGS) \
402 top_distdir="$$top_distdir" \
403 distdir="$$distdir/$$subdir" \
404 distdir) \
405 || exit 1; \
406 fi; \
407 done
408 check-am: all-am
409 check: check-recursive
410 all-am: Makefile $(DATA)
411 installdirs: installdirs-recursive
412 installdirs-am:
413 for dir in "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(perllibdir)"; do \
414 test -z "$$dir" || $(mkdir_p) "$$dir"; \
415 done
416 install: install-recursive
417 install-exec: install-exec-recursive
418 install-data: install-data-recursive
419 uninstall: uninstall-recursive
421 install-am: all-am
422 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
424 installcheck: installcheck-recursive
425 install-strip:
426 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
427 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
428 `test -z '$(STRIP)' || \
429 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
430 mostlyclean-generic:
432 clean-generic:
433 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
435 distclean-generic:
436 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
438 maintainer-clean-generic:
439 @echo "This command is intended for maintainers to use"
440 @echo "it deletes files that may require special tools to rebuild."
441 clean: clean-recursive
443 clean-am: clean-generic mostlyclean-am
445 distclean: distclean-recursive
446 -rm -f Makefile
447 distclean-am: clean-am distclean-generic distclean-tags
449 dvi: dvi-recursive
451 dvi-am:
453 html: html-recursive
455 info: info-recursive
457 info-am:
459 install-data-am: install-dist_perllibDATA install-nodist_perllibDATA
461 install-exec-am:
463 install-info: install-info-recursive
465 install-man:
467 installcheck-am:
469 maintainer-clean: maintainer-clean-recursive
470 -rm -f Makefile
471 maintainer-clean-am: distclean-am maintainer-clean-generic
473 mostlyclean: mostlyclean-recursive
475 mostlyclean-am: mostlyclean-generic
477 pdf: pdf-recursive
479 pdf-am:
481 ps: ps-recursive
483 ps-am:
485 uninstall-am: uninstall-dist_perllibDATA uninstall-info-am \
486 uninstall-nodist_perllibDATA
488 uninstall-info: uninstall-info-recursive
490 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
491 clean clean-generic clean-recursive ctags ctags-recursive \
492 distclean distclean-generic distclean-recursive distclean-tags \
493 distdir dvi dvi-am html html-am info info-am install \
494 install-am install-data install-data-am \
495 install-dist_perllibDATA install-exec install-exec-am \
496 install-info install-info-am install-man \
497 install-nodist_perllibDATA install-strip installcheck \
498 installcheck-am installdirs installdirs-am maintainer-clean \
499 maintainer-clean-generic maintainer-clean-recursive \
500 mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
501 pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
502 uninstall-dist_perllibDATA uninstall-info-am \
503 uninstall-nodist_perllibDATA
506 Config.pm: Config.in Makefile
507 rm -f Config.tmp Config.pm
508 $(do_subst) $(srcdir)/Config.in >Config.tmp
509 chmod +x Config.tmp
510 chmod a-w Config.tmp
511 mv -f Config.tmp Config.pm
512 # Tell versions [3.59,3.63) of GNU make to not export all variables.
513 # Otherwise a system limit (for SysV at least) may be exceeded.
514 .NOEXPORT: