5 - The NEWS file is more verbose.
9 - Autoconf 2.58 or greater is required.
13 - AR's `cru' flags are now set in a global ARFLAGS variable instead
14 of being hard-coded in each $(AR) invocation, so they can be
15 substituted from configure.ac. This has been requested by people
16 dealing with non-POSIX ar implementations.
18 - New warning option: -Woverride. This will warn about any user
19 target or variable definitions which override Automake
22 - Texinfo rules back up and restore info files when makeinfo fails.
24 - Texinfo rules now support the `html' target.
25 Running this requires Texinfo 4.0 or greater.
27 `html' is a new recursive target, so if your package mixes
28 hand-crafted `Makefile.in's with Automake-generated
29 `Makefile.in's, you should adjust the former to support (or
30 ignore) this target so that `make html' recurses successfully. If
31 you had a custom `html' rule in your `Makefile.am', it's better to
32 rename it as `html-local', otherwise your rule will override
33 Automake's new rule (you can check that by running `automake
34 -Woverride') and that will stop the recursion to subdirectories.
36 Last but not least, this `html' rule is declared PHONY, even when
37 overridden. Fortunately, it appears that few packages use a
38 non-PHONY `html' rule.
40 - Any file which is m4_included from configure.ac will appear as a
41 configure and Makefile.in dependency, and will be automatically
44 - The rules for rebuilding Makefiles and Makefile.ins will now
45 rebuild all Makefiles and all Makefile.ins at once when one of
46 configure's dependencies has changed. This is considerably faster
47 than previous implementations, where config.status and automake
48 were run separately in each directory (this still happens when you
49 change a Makefile.am locally, without touching configure.ac or
50 friends). Doing this also solves a longstanding issue: these
51 rebuild rules failed to work when adding new directories to the
52 tree, forcing you to run automake manually.
54 - For similar reasons, the rules to rebuild configure,
55 config.status, and aclocal.m4 are now defined in all directories.
56 Note that if you were using the CONFIG_STATUS_DEPENDENCIES and
57 CONFIGURE_DEPENDENCIES (undocumented) variables, you should better
58 define them in all directories. This is easily done using an
59 AC_SUBST (make sure you prefix these dependencies with
60 $(abs_top_srcdir) since this variable will appear at different
61 levels of the build tree).
63 - aclocal will now use `m4_include' instead of copying local m4
64 files into aclocal.m4. (Local m4 files are those you ship with
65 your project, other files will be copied as usual.)
67 Because m4_included files are automatically distributed, it means
68 for most projects there is no point in EXTRA_DISTing the list of
69 m4 files which are used. (You can probably get rid of
70 m4/Makefile.am if you had one.)
72 - aclocal will avoid touching aclocal.m4 when possible, so that
73 Autom4te's cache isn't needlessly invalidated. This behavior can
74 be switched off with the new `--force' option.
76 - aclocal now uses Autoconf's --trace to detect macros which are
77 actually used and will no longer include unused macros simply
78 because they where mentioned. This was often the case for macros
81 - New options no-dist and no-dist-gzip.
83 - compile, depcomp, elisp-comp, install-sh, mdate-sh, mkinstalldirs,
84 py-compile, and ylwrap, now all understand --version and --help.
86 - Automake will now recognize AC_CONFIG_LINKS so far as removing created
87 links as part of the distclean target and including source files in
90 - AM_PATH_PYTHON now supports ACTION-IF-FOUND and ACTION-IF-NOT-FOUND
91 argument. The latter can be used to override the default behavior
94 - Automake will exit with $? = 63 on version mismatch. (So does
95 Autoconf 2.58) missing knows this, and in this case it will
96 emulate the tools as if they were absent. Because older versions
97 of Automake and Autoconf did not use this exit code, this change
98 will only be useful in projects generated with future versions of
101 - When using AC_CONFIG_FILES with multiple input files, Automake
102 generates the first ".in" input file for which a ".am" exists.
103 (Former versions would try to use only the first input file.)
105 - lisp_DATA is now allowed. If you are using the empty ELCFILES
106 idiom to disable byte-compilation of lisp_LISP files, it is
107 recommended that you switch to using lisp_DATA. Note that
108 this is not strictly equivalent: lisp_DATA will install elisp
109 files even if emacs is not installed, while *_LISP do not
110 install anything unless emacs is found.
112 - Makefiles will prefer `mkdir -p' over mkinstalldirs if it is
113 available. This selection is achieved through the Makefile
114 variable $(mkdir_p) that is set by AM_INIT_AUTOMAKE to either
115 `mkdir -m 0755 -p --', `$(mkinstalldirs) -m 0755', or
116 `$(install_sh) -m 0755 -d'.
120 - Because `mkdir -p' is available on most platforms, and we can use
121 `install-sh -d' when it is not, the use of the mkinstalldirs
122 script is being phased out. `automake --add-missing' no longer
123 installs it, and if you remove mkinstalldirs from your package,
124 automake will define $(mkinstalldirs) as an alias for $(mkdir_p).
126 Gettext 1.12.1 still requires mkinstalldirs. Fortunately
127 gettextize and autopoint will install it when needed. Automake
128 will continue to define the $(mkinstalldirs) and to distribute
129 mkinstalldirs when this script is in the source tree.
131 - AM_PROG_CC_STDC is now empty. The content of this macro was
132 merged in AC_PROG_CC. If your code uses $am_cv_prog_cc_stdc, you
133 should adjust it to use $ac_cv_prog_cc_stdc instead. (This
134 renaming should be safe, even if you have to support several,
135 versions of Automake, because AC_PROG_CC defines this variable
136 since Autoconf 2.54.)
138 - Some users where using the undocumented ACLOCAL_M4_SOURCES
139 variable to override the aclocal.m4 dependencies computed
140 (inaccurately) by older versions of Automake. Because Automake
141 now tracks configure's m4 dependencies accurately (see m4_include
142 above), the use of ACLOCAL_M4_SOURCES should be considered
143 obsolete and will be flagged as such when running `automake
148 - Defining programs conditionally using Automake conditionals no
149 longer leads to a combinatorial explosion. The following
150 construct used to be troublesome when used with dozens of
165 Likewise for _SOURCES, _LDADD, and _LIBADD variables.
167 - Due to implementation constraints, previous versions of Automake
168 proscribed multiple conditional definitions of some variables
178 All _PROGRAMS, _LDADD, and _LIBADD variables were affected.
179 This restriction has been lifted, and these variables now
180 support multiple conditional definitions as do other variables.
182 - Cleanup the definitions of $(distdir) and $(top_distdir).
183 $(top_distdir) now points to the root of the distribution
184 directory created during `make dist', as it did in Automake 1.4,
185 not to the root of the build tree as it did in intervening
186 versions. Furthermore these two variables are now only defined in
187 the top level Makefile, and passed to sub-directories when running
190 - The --no-force option now correctly checks the Makefile.in's
191 dependencies before deciding not to update it.
193 - Do not assume that make files are called Makefile in cleaning rules.
195 - Update .info files in the source tree, not in the build tree. This
196 is what the GNU Coding Standard recommend. Only Automake 1.7.x
197 used to update these files in the build tree (previous versions did
198 it in the source tree too), and it caused several problems, varying
199 from mere annoyance to portability issues.
201 - COPYING, COPYING.LIB, and COPYING.LESSER are no longer overwritten
202 when --add-missing and --force-missing are used. For backward
203 compatibility --add-missing will continue to install COPYING (in
204 `gnu' strictness) when none of these three files exist, but this
205 use is deprecated: you should better choose a license yourself and
206 install it once for all in your source tree (and in your code
211 - The Automake manual is now distributed under the terms of the GNU FDL.
213 - Targets dist-gzip, dist-bzip2, dist-tarZ, dist-zip are always defined.
215 - core dumps are no longer removed by the cleaning rules. There are
216 at least three reasons for this:
217 1. These files should not be created by any build step,
218 so their removal do not fit any of the cleaning rules.
219 Actually, they may be precious to the developer.
220 2. If such file is created during a build, then it's clearly a
221 bug Automake should not hide. Not removing the file will
222 cause `make distcheck' to complain about its presence.
223 3. Operating systems have different naming conventions for
224 core dump files. A core file on one system might be a
225 completely legitimate data file on another system.
227 - RUNTESTFLAGS, CTAGSFLAGS, ETAGSFLAGS, JAVACFLAGS are no longer
228 defined by Automake. This means that any definition in the
229 environment will be used, unless overridden in the Makefile.am or
230 on the command line. The old behavior, where these variables were
231 defined empty in each Makefile, can be obtained by AC_SUBSTing or
232 AC_ARG_VARing each variable from configure.ac.
235 * Fix install-strip to work with nobase_ binaries.
236 * Fix renaming of #line directives in ylwrap.
237 * Rebuild with Autoconf 2.59. (1.7.8 was not installable with pdksh.)
240 * Remove spurious blank lines in cleaning rules introduced in 1.7.7.
241 * Fix detection of Debian's install-info, broken since version 1.5.
242 (Debian bug #213524).
243 * Honor -module if it appears in AM_LDFLAGS (i.e., relax name checking)
244 This was only done for libfoo_LDFLAGS and LDFLAGS in previous versions.
247 * The implementation of automake's --no-force option is unreliable,
248 so this option is ignored in this version. A real fix will appear in
249 Automake 1.8. (Debian Bug #206299)
250 * AM_PATH_PYTHON: really check the whole list of interpreters if no
251 argument is given. (PR/399)
252 * Do not warn about leading `_' in variable names, even with -Wportability.
253 * Support user redefinitions of TEXINFO_TEX.
254 * depcomp: support AIX Compiler version 6.
255 * Fix missing rebuilds during `make dist' with BSD make.
256 (Could produce tarballs containing out-of-date files.)
257 * Resurrect multilib support.
258 * Noteworthy manual updates:
259 - Extending aclocal: how to write m4 macros that won't trigger warnings
261 - A Shared Library: Rewrite and split into subsections.
264 * Fix depcomp's icc mode for ICC 7.1.
265 * Diagnose calls to AC_CONFIG_FILES and friends with not enough arguments.
266 * Fix maintainer-clean's removal of autom4te.cache in VPATH builds.
267 * Fix AM_PATH_LISPDIR to work with POSIXLY_CORRECT=1.
268 * Fix the location reported in some diagnostics related to AUTOMAKE_OPTIONS.
269 * Remove Latin-1 characters from elisp-comp.
270 * Update the manual's @dircategory to match the Free Software Directory.
273 * Update install-sh's license to remove an advertising clause.
275 * Fix a bug introduced in 1.7.4, related to BUILT_SOURCE handling,
276 that caused invalid Makefile.ins to be generated.
277 * Make sure AM_MAKE_INCLUDE doesn't fail when a `doit' file exists.
278 * New FAQ entry: renamed objects.
281 * Tweak the TAGS rule to support Exuberant Ctags (in addition to
282 the Emacs implementation)
283 * Fix output of aclocal.m4 dependencies in subdirectories.
284 * Use `mv -f' instead of `mv' in fastdep rules.
285 * Upgrade mdate-sh to work on OS/2.
286 * Don't byte-compile elisp files when ELCFILES is set empty.
287 (this documented feature was broken by 1.7.3)
288 * Diagnose trailing backslashes on last line of Makefile.am.
289 * Diagnose whitespace following trailing backslashes.
290 * Multiple tests are now correctly supported in DEJATOOL. (PR/388)
291 * Fix rebuilt rules for AC_CONFIG_FILES([Makefile:Makefile.in:Makefile.bot])
293 * `make install' will build `BUILT_SOURCES' first.
294 * Minor documentation fixes.
297 * Fix stamp files numbering (when using multiple AC_CONFIG_HEADERS).
298 * Query distutils for `pythondir' and `pythonexecdir', instead of
299 using an hardcoded path. This should allow builds on 64-bit
300 distributions that usually use lib64/ instead of lib/.
301 * AM_PATH_PYTHON will also search for python2.3.
302 * elisp files are now built all at once instead of one by one. Besides
303 incurring a speed-up, this is required to support interdependent elisp files.
305 - `make distcheck' will now work in `_inst/' and `_build' instead
306 of `=inst/' and `=build/'
307 - use `_dirstamp' when the file-system doesn't support `.dirstamp'
308 - install/uninstall `*.i[0-9][0-9]'-style info files
309 - more changes that affect only the Automake package (not its output)
310 * Fix some incompatibilities with upcoming perl-5.10.
311 * Properly quote AC_PACKAGE_TARNAME and AC_PACKAGE_VERSION when defining
314 - dashmstdout and dashXmstdout modes: don't use `-o /dev/null', this
315 is troublesome with gcc and Solaris compilers. (PR/385)
316 - makedepend mode: work with Libtool. (PR/385 too)
318 * better support for unusual gettext setups, such as multiple po/ directories
320 - Flag missing po/ and intl/ directories as warnings, not errors.
321 - Disable these warnings if po/ does not exist.
322 * Noteworthy manual updates:
324 - Document how AC_CONFIG_AUX_DIR interacts with missing files.
326 - Document `AM_YFLAGS = -d'. (PR/382)
329 * Fix installation and uninstallation of Info files built in subdirectories.
330 * Do not run `./configure --with-included-gettext' during `make distcheck'
331 if AM_GNU_GETTEXT([external]) is used.
332 * Correctly uninstall renamed man pages.
333 * Do not strip escaped newline in variables defined in one condition
334 and augmented in another condition.
335 * Fix ansi2knr rules for LIBOBJS sources.
336 * Clean all known Texinfo index files, not only those which appear to
337 be used, because we cannot know wich indexes are used in included files.
338 (PR/375, Debian Bug #168671)
339 * Honor only the first @setfilename seen in a Texinfo file.
340 * Treat "required file X not found" diagnostics as errors (exit status 1).
341 * Don't complain that a required file is not found when it is a Makefile
343 * Don't use single suffix inference rules when building `.info'-less
344 Info files, for the sake of Solaris make.
345 * The `check' target now depends on `$(BUILT_SOURCES)'. (PR/359)
346 * Recognize multiple inference rules such as `.a.b .c.d:'. (PR/371)
347 * Warn about multiple inference rules when -Wportability is used. (PR/372)
348 * Fix building of deansified files from subdirectories. (PR/370)
349 * Add missing `fi' in the .c->.obj rules.
350 * Improve install-sh to work even when names contain spaces or certain
351 (but not all) shell metachars.
352 * Fix the following spurious failures in the test suite:
353 depcomp2.test, gnits2.test, gnits3.test, python3.test, texinfo13.test
354 * Noteworthy manual updates:
355 - Augment the section about BUILT_SOURCES.
356 - Mention that AM_PROG_CC_STDC is a relic that is better avoided today.
359 * Honor `ansi2knr' for files built in subdirectories, or using per-targets
361 * Aclocal should now recognize macro names containing parentheses, e.g.
362 AC_DEFUN([AC_LANG_PREPROC(Fortran 90)], [...]).
363 * Erase *.sum and *.log files created by DejaGnu, during `make distclean'.
365 * Install Python files even if they were built. (PR/369)
366 * Have stamp-vti dependent upon configure instead of configure.ac, as the
367 version might not be defined in the latter. (PR/358)
368 * Reorder arguments passed to a couple of commands, so things works
369 when POSIXLY_CORRECT=1.
370 * Fix a regex that can cause Perl to segfault on large input.
372 * Fix distribution of packages that have some sources defined conditionally,
373 as in the `Conditional compilation using Automake conditionals' example
375 * Fix spurious test suite failures on IRIX.
376 * Don't report a required variable as undefined if it has been
377 defined conditionally for the "right" conditions.
378 * Fix cleaning of the /tmp subdirectory used by `make distcheck', in case
379 `make distcheck' fails.
380 * Fix distribution of included Makefile fragment, so we don't create
381 spurious directories in the distribution. (PR/366)
382 * Don't complain that a target lacks `.$(EXEEXT)' when it has it.
385 * Autoconf 2.54 is required.
386 * `aclocal' and `automake' will no longer warn about obsolete
387 configure macros. This is done by `autoconf -Wobsolete'.
388 * AM_CONFIG_HEADER, AM_SYS_POSIX_TERMIOS and
389 AM_HEADER_TIOCGWINSZ_NEEDS_SYS_IOCTL are obsolete (although still
390 supported). You should use AC_CONFIG_HEADERS, AC_SYS_POSIX_TERMIOS,
391 and AC_HEADER_TIOCGWINSZ instead. `autoupdate' can upgrade
392 `configure.ac' for you.
393 * Support for per-program and per-library `_CPPFLAGS'.
394 * New `ctags' target (builds CTAGS files).
395 * Support for -Wmumble and -Wno-mumble, where mumble is a warning category
396 (see `automake --help' or the manual for a list of them).
397 * Honor the WARNINGS environment variable.
398 * Omit the call to depcomp when using gcc3: call the compiler directly.
399 * A new option, std-options, tests that programs support --help and --version
400 when `make installcheck' is run. This is enabled by --gnits.
401 * Texinfo rules now support the `ps' and `pdf' targets.
402 * Info files are now created in the build directory, not the source directory.
403 * info_TEXINFOS supports files in subdirectories (this requires Texinfo 4.1
405 * `make distcheck' will enforce DESTDIR support by attempting
407 * `+=' can be used in conditionals, even if the augmented variable
408 was defined for another condition.
409 * Makefile fragments (inserted with `include') are always distributed.
410 * Use Autoconf's --trace interface to inspect configure.ac and get
411 a more accurate view of it.
412 * Add support for extending aclocal's default macro search path
413 using a `dirlist' file within the aclocal directory.
414 * automake --output-dir is deprecated.
415 * The part of the distcheck target that checks whether uninstall actually
416 removes all installed files has been moved in a separate target,
417 distuninstallcheck, so it can be overridden easily.
421 * Support for AM_INIT_GETTEXT([external])
422 * Bug fixes, including:
423 - Fix Automake's own `make install' so it works even if `ln' doesn't.
424 - nobase_ programs and scripts honor --program-transform correctly.
425 - Erase configure.lineno during `make distclean'.
426 - Erase YACC and LEX outputs during `make maintainer-clean'.
429 * Many bug fixes, including:
430 - Requiring the current version works.
431 - Fix "$@" portability issues (for Zsh).
432 - Fix output of dummy dependency files in presence of post-processed
434 - Don't compute dependencies in background to avoid races with libtool.
435 - Fix handling of _OBJECTS variables for targets sharing source variables.
436 - Check dependency mode for Java when AM_PROG_GCJ is used.
439 * automake --output-dir is deprecated
440 * Many bug fixes, including:
441 - Don't choke on AM_LDFLAGS definitions.
442 - Clean libtool objects from subdirectories.
443 - Allow configure variables with reserved suffix and unknown prefix
444 (e.g. AC_SUBST(mumble_LDFLAGS) when 'mumble' is not a target).
445 - Fix the definition of AUTOMAKE and ACLOCAL in configure.
448 * Autoconf 2.52 is required.
449 * automake no longer run libtoolize.
450 This is the job of autoreconf (from GNU Autoconf).
451 * `dist' generates all the archive flavors, as did `dist-all'.
452 * `dist-gzip' generates the Gzip tar file only.
453 * Combining Automake Makefile conditionals no longer lead to a combinatorial
454 explosion. Makefile.in's keep a reasonable size.
455 * AM_FUNC_ERROR_AT_LINE, AM_FUNC_STRTOD, AM_FUNC_OBSTACK, AM_PTRDIFF_T
456 are no longer shipped, since Autoconf 2.52 provides them (both as AM_
458 * `#line' of Lex and Yacc files are properly set.
459 * EXTRA_DIST can contain generated directories.
460 * Support for dot-less extensions in suffix rules.
461 * The part of the distcheck target that checks whether distclean actually
462 cleans all built files has been moved in a separate target, distcleancheck,
463 so it can be overridden easily.
464 * `make distcheck' will pass additional options defined in
465 $(DISTCHECK_CONFIGURE_FLAGS) to configure.
466 * Fixed CDPATH portability problems, in particular for MacOS X.
467 * Fixed handling of nobase_ targets.
468 * Fixed support of implicit rules leading to .lo objects.
469 * Fixed late inclusion of --add-missing files (e.g. depcomp) in DIST_COMMON
470 * Added uninstall-hook target
471 * `AC_INIT AM_INIT_AUTOMAKE(tarname,version)' is an obsolete construct.
472 You can now use `AC_INIT(pkgname,version) AM_INIT_AUTOMAKE' instead.
473 (Note that "pkgname" is not "tarname", see the manual for details.)
474 It is also possible to pass a list of global Automake options as
475 first argument to this new form of AM_INIT_AUTOMAKE.
476 * Compiler-based assembler is now called `CCAS'; people expected `AS'
477 to be a real assembler.
478 * AM_INIT_AUTOMAKE will set STRIP itself when it needs it. Adding
479 AC_CHECK_TOOL([STRIP], [strip]) manually is no longer required.
480 * aclocal and automake are also installed with the version number
481 appended, and some of the install directory names have changed.
482 This lets you have multiple versions installed simultaneously.
483 * Support for parsers and lexers in subdirectories.
486 * Support for `configure.ac'.
487 * Support for `else COND', `endif COND' and negated conditions `!COND'.
488 * `make dist-all' is much faster.
489 * Allows '@' AC_SUBSTs in macro names.
490 * Faster AM_INIT_AUTOMAKE (requires update of `missing' script)
491 * User-side dependency tracking. Developers no longer need GNU make
493 * Uses DIST_SUBDIRS in some situations when SUBDIRS is conditional
494 * Most files are correctly handled if they appear in subdirs
495 For instance, a _DATA file can appear in a subdir
496 * GNU tar is no longer required for `make dist'
497 * Added support for `dist_' and `nodist_' prefixes
498 * Added support for `nobase_' prefix
499 * Compiled Java support
500 * Support for per-executable and per-library compilation flags
504 * Added support for the Fortran 77 programming language.
505 * Re-indexed the Automake Texinfo manual.
506 * Added `AM_FOOFLAGS' variable for each compiler invocation;
507 e.g. AM_CFLAGS can be used in Makefile.am to set C compiler flags
508 * Support for latest autoconf, including support for objext
509 * Can now put `.' in SUBDIRS to control build order
510 * `include' command and `+=' support for macro assignment
511 * Dependency tracking no long susceptible to deleted header file problem
512 * Maintainer mode now a conditional. @MAINT@ is now an anachronism.
517 * Better Cygwin32 support
518 * Support for suffix rules with _SOURCES variables
519 * New options `readme-alpha' and `check-news'; Gnits mode sets these
520 * @LEXLIB@ no longer required when lex source seen
521 Lex support in `missing', and new lex macro. Update your missing script.
522 * Built-in support for assembly
523 * aclocal gives error if `AM_' macro not found
524 * Passed YFLAGS, not YACCFLAGS, to yacc
525 * AM_PROG_CC_STDC does not have to come before AC_PROG_CPP
526 * Dependencies computed as a side effect of compilation
527 * Preliminary support for Java
528 * DESTDIR support at "make install" time
529 * Improved ansi2knr support; you must use the latest ansi2knr.c (included)
533 * Better DejaGnu support
534 * Added no-installinfo option
535 * Added Emacs Lisp support
536 * Added --no-force option
537 * Included `aclocal' program
538 * Automake will now generate rules to regenerate aclocal.m4, if appropriate
539 * Now uses `AM_' macro names everywhere
540 * ansi2knr option can have directory prefix (eg `../lib/ansi2knr')
541 ansi2knr now works correctly on K&R sources
542 * Better C++, yacc, lex support
543 * Will compute _DEPENDENCIES variables automatically if not supplied
544 * Will interpolate $(...) and ${...} when examining contents of a variable
545 * .deps files now in build directory, not source directory; dependency
546 handling generally rewritten
547 * DATA, MANS and BUILT_SOURCES no longer included in distribution
548 * can now put config.h into a subdir
549 * Added dist-all target
550 * Support for install-info program (see texinfo 3.9)
551 * Support for "yacc -d"
552 * configure substitutions are automatically discovered and included
553 in generated Makefile.in
554 * Special --cygnus mode
555 * OMIT_DEPENDENCIES can now hold list of dependencies to be omitted
556 when making distribution. Some dependencies are auto-ignored.
557 * Changed how libraries are specified in _LIBRARIES variable
558 * Full libtool support, from Gord Matzigkeit
559 * No longer have to explicitly touch stamp-h when using AC_CONFIG_HEADER;
560 AM_CONFIG_HEADER handles it automatically
561 * Texinfo output files no longer need .info extension
562 * Added `missing' support
564 * Conditionals in Makefile.am, from Ian Taylor
568 * distcheck target runs install and installcheck targets
569 * Added preliminary support for DejaGnu.
574 * More libtool fixes from Gord Matzigkeit; libtool support is still
576 * Added support for jm_MAINTAINER_MODE
578 * New "distcheck" target
582 * mkinstalldirs and mdate-sh now appear in directory specified by
584 * Removed DIST_SUBDIRS, DIST_OTHER
585 * AC_ARG_PROGRAM only required when an actual program exists
586 * dist-hook target now run before distribution packaged up; idea from
587 Dieter Baron. Other hooks exist, too.
588 * Preliminary (unfinished) support for libtool
589 * Added short option names.
590 * Better "dist" support when gluing together multiple packages
594 * Documentation updates (many from François Pinard)
595 * strictness `normal' now renamed to `foreign'
596 * Renamed --install-missing to --add-missing
597 * Now handles AC_CONFIG_AUX_DIR
598 * Now handles TESTS macro
599 * DIST_OTHER renamed to EXTRA_DIST
600 * DIST_SUBDIRS is deprecated
601 * @ALLOCA@ and @LIBOBJS@ now work in _LDADD variables
602 * Better error messages in many cases
603 * Program names are canonicalized
604 * Added "check" prefix; from Gord Matzigkeit
608 * configure.in scanner knows about AC_PATH_XTRA, AC_OUTPUT ":" syntax
609 * Beginnings of a test suite
610 * Automatically adds -I options for $(srcdir), ".", and path to config.h
611 * Doesn't print anything when running
612 * Beginnings of MAINT_CHARSET support
613 * Can specify version in AUTOMAKE_OPTIONS
614 * Most errors recognizable by Emacs' M-x next-error
615 * Added --verbose option
616 * All "primary" variables now obsolete; use EXTRA_PRIMARY to supply
617 configure-generated names
618 * Required macros now distributed in aclocal.m4
620 * --strictness=gnu is default
624 * More sophisticated configure.in scanning; now understands ALLOCA and
625 LIBOBJS directly, handles AC_CONFIG_HEADER more precisely, etc.
626 * TEXINFOS and MANS now obsolete; use info_TEXINFOS and man_MANS instead.
627 * CONFIG_HEADER variable now obsolete
628 * Can handle multiple Texinfo sources
629 * Allow hierarchies deeper than 2. From Gord Matzigkeit.
630 * HEADERS variable no longer needed; now can put .h files directly into
631 foo_SOURCES variable.
632 * Automake automatically rebuilds files listed in AC_OUTPUT. The
633 corresponding ".in" files are included in the distribution.
636 * Added --gnu and --gnits options
637 * More standards checking
639 * Cleaned up 'dist' targets
640 * Added AUTOMAKE_OPTIONS variable and several options
641 * Now scans configure.in to get some information (preliminary)
644 * Works with Perl 4 again
647 * Added --install-missing option.
648 * Pretty-prints generated macros and rules
649 * Comments in Makefile.am are placed more intelligently in Makefile.in
650 * Generates .PHONY target
651 * Rule or macro in Makefile.am now overrides contents of Automake file
652 * Substantial cleanups from François Pinard
656 * Works with Perl 4 again.
659 * New uniform naming scheme.
660 * --strictness option
662 * '.c' files corresponding to '.y' or '.l' files are automatically
664 * Many bug fixes and cleanups
667 * Allow objects to be conditionally included in libraries via lib_LIBADD.
670 * Bug fixes in 'clean' code.
671 * Now generates 'installdirs' target.
672 * man page installation reworked.
673 * 'make dist' no longer re-creates all Makefile.in's.
676 * Reimplemented in Perl
677 * Added --amdir option (for debugging)
678 * Texinfo support cleaned up.
679 * Automatic de-ANSI-fication cleaned up.
680 * Cleaned up 'clean' targets.
683 * Automatic dependency tracking
685 * New variables DATA and PACKAGEDATA
686 * SCRIPTS installed using $(INSTALL_SCRIPT)
687 * No longer uses double-colon rules
689 * Changes in advance of internationalization
693 Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
694 Free Software Foundation, Inc.
696 This file is part of GNU Automake.
698 GNU Automake is free software; you can redistribute it and/or modify
699 it under the terms of the GNU General Public License as published by
700 the Free Software Foundation; either version 2, or (at your option)
703 GNU Automake is distributed in the hope that it will be useful,
704 but WITHOUT ANY WARRANTY; without even the implied warranty of
705 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
706 GNU General Public License for more details.
708 You should have received a copy of the GNU General Public License
709 along with GNU Automake; see the file COPYING. If not, write to
710 the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
711 Boston, MA 02111-1307, USA.