lib/install-sh

   1 #!/bin/sh
   2 # install - install a program, script, or datafile
   3
   4 scriptversion=2004-01-13.14
   5
   6 # This originates from X11R5 (mit/util/scripts/install.sh), which was
   7 # later released in X11R6 (xc/config/util/install.sh) with the
   8 # following copyright and license.
   9 #
  10 # Copyright (C) 1994 X Consortium
  11 #
  12 # Permission is hereby granted, free of charge, to any person obtaining a copy
  13 # of this software and associated documentation files (the "Software"), to
  14 # deal in the Software without restriction, including without limitation the
  15 # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
  16 # sell copies of the Software, and to permit persons to whom the Software is
  17 # furnished to do so, subject to the following conditions:
  18 #
  19 # The above copyright notice and this permission notice shall be included in
  20 # all copies or substantial portions of the Software.
  21 #
  22 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  23 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  24 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
  25 # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
  26 # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
  27 # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  28 #
  29 # Except as contained in this notice, the name of the X Consortium shall not
  30 # be used in advertising or otherwise to promote the sale, use or other deal-
  31 # ings in this Software without prior written authorization from the X Consor-
  32 # tium.
  33 #
  34 #
  35 # FSF changes to this file are in the public domain.
  36 #
  37 # Calling this script install-sh is preferred over install.sh, to prevent
  38 # `make' implicit rules from creating a file called install from it
  39 # when there is no Makefile.
  40 #
  41 # This script is compatible with the BSD install script, but was written
  42 # from scratch.  It can only install one file at a time, a restriction
  43 # shared with many OS's install programs.
  44
  45 # set DOITPROG to echo to test this script
  46
  47 # Don't use :- since 4.3BSD and earlier shells don't like it.
  48 doit="${DOITPROG-}"
  49
  50 # put in absolute paths if you don't have them in your path; or use env. vars.
  51
  52 mvprog="${MVPROG-mv}"
  53 cpprog="${CPPROG-cp}"
  54 chmodprog="${CHMODPROG-chmod}"
  55 chownprog="${CHOWNPROG-chown}"
  56 chgrpprog="${CHGRPPROG-chgrp}"
  57 stripprog="${STRIPPROG-strip}"
  58 rmprog="${RMPROG-rm}"
  59 mkdirprog="${MKDIRPROG-mkdir}"
  60
  61 transformbasename=
  62 transform_arg=
  63 instcmd="$mvprog"
  64 chmodcmd="$chmodprog 0755"
  65 chowncmd=
  66 chgrpcmd=
  67 stripcmd=
  68 rmcmd="$rmprog -f"
  69 mvcmd="$mvprog"
  70 src=
  71 dst=
  72 dir_arg=
  73
  74 usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
  75    or: $0 [OPTION]... SRCFILES... DIRECTORY
  76    or: $0 -d DIRECTORIES...
  77
  78 In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
  79 In the second, create the directory path DIR.
  80
  81 Options:
  82 -b=TRANSFORMBASENAME
  83 -c         copy source (using $cpprog) instead of moving (using $mvprog).
  84 -d         create directories instead of installing files.
  85 -g GROUP   $chgrp installed files to GROUP.
  86 -m MODE    $chmod installed files to MODE.
  87 -o USER    $chown installed files to USER.
  88 -s         strip installed files (using $stripprog).
  89 -t=TRANSFORM
  90 --help     display this help and exit.
  91 --version  display version info and exit.
  92
  93 Environment variables override the default commands:
  94   CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
  95 "
  96
  97 while test -n "$1"; do
  98   case $1 in
  99     -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
 100         shift
 101         continue;;
 102
 103     -c) instcmd=$cpprog
 104         shift
 105         continue;;
 106
 107     -d) dir_arg=true
 108         shift
 109         continue;;
 110
 111     -g) chgrpcmd="$chgrpprog $2"
 112         shift
 113         shift
 114         continue;;
 115
 116     --help) echo "$usage"; exit 0;;
 117
 118     -m) chmodcmd="$chmodprog $2"
 119         shift
 120         shift
 121         continue;;
 122
 123     -o) chowncmd="$chownprog $2"
 124         shift
 125         shift
 126         continue;;
 127
 128     -s) stripcmd=$stripprog
 129         shift
 130         continue;;
 131
 132     -t=*) transformarg=`echo $1 | sed 's/-t=//'`
 133         shift
 134         continue;;
 135
 136     --version) echo "$0 $scriptversion"; exit 0;;
 137
 138     *)  # When -d is used, all remaining arguments are directories to create.
 139         test -n "$dir_arg" && break
 140         # Otherwise, the last argument is the destination.  Remove it from $@.
 141         for arg
 142         do
 143           if test -n "$dstarg"; then
 144             # $@ is not empty: it contains at least $arg.
 145             set fnord "$@" "$dstarg"
 146             shift # fnord
 147           fi
 148           shift # arg
 149           dstarg=$arg
 150         done
 151         break;;
 152   esac
 153 done
 154
 155 if test -z "$1"; then
 156   if test -z "$dir_arg"; then
 157     echo "$0: no input file specified." >&2
 158     exit 1
 159   fi
 160   # It's OK to call `install-sh -d' without argument.
 161   # This can happen when creating conditional directories.
 162   exit 0
 163 fi
 164
 165 for src
 166 do
 167   # Protect names starting with `-'.
 168   case $src in
 169     -*) src=./$src ;;
 170   esac
 171
 172   if test -n "$dir_arg"; then
 173     dst=$src
 174     src=
 175
 176     if test -d "$dst"; then
 177       instcmd=:
 178       chmodcmd=
 179     else
 180       instcmd=$mkdirprog
 181     fi
 182   else
 183     # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
 184     # might cause directories to be created, which would be especially bad
 185     # if $src (and thus $dsttmp) contains '*'.
 186     if test ! -f "$src" && test ! -d "$src"; then
 187       echo "$0: $src does not exist." >&2
 188       exit 1
 189     fi
 190
 191     if test -z "$dstarg"; then
 192       echo "$0: no destination specified." >&2
 193       exit 1
 194     fi
 195
 196     dst=$dstarg
 197     # Protect names starting with `-'.
 198     case $dst in
 199       -*) dst=./$dst ;;
 200     esac
 201
 202     # If destination is a directory, append the input filename; won't work
 203     # if double slashes aren't ignored.
 204     if test -d "$dst"; then
 205       dst=$dst/`basename "$src"`
 206     fi
 207   fi
 208
 209   # This sed command emulates the dirname command.
 210   dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
 211
 212   # Make sure that the destination directory exists.
 213
 214   # Skip lots of stat calls in the usual case.
 215   if test ! -d "$dstdir"; then
 216     defaultIFS='
 217          '
 218     IFS="${IFS-$defaultIFS}"
 219
 220     oIFS=$IFS
 221     # Some sh's can't handle IFS=/ for some reason.
 222     IFS='%'
 223     set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
 224     IFS=$oIFS
 225
 226     pathcomp=
 227
 228     while test $# -ne 0 ; do
 229       pathcomp=$pathcomp$1
 230       shift
 231       test -d "$pathcomp" || $mkdirprog "$pathcomp"
 232       pathcomp=$pathcomp/
 233     done
 234   fi
 235
 236   if test -n "$dir_arg"; then
 237     $doit $instcmd "$dst" \
 238       && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
 239       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
 240       && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
 241       && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
 242
 243   else
 244     # If we're going to rename the final executable, determine the name now.
 245     if test -z "$transformarg"; then
 246       dstfile=`basename "$dst"`
 247     else
 248       dstfile=`basename "$dst" $transformbasename \
 249                | sed $transformarg`$transformbasename
 250     fi
 251
 252     # don't allow the sed command to completely eliminate the filename.
 253     test -z "$dstfile" && dstfile=`basename "$dst"`
 254
 255     # Make a couple of temp file names in the proper directory.
 256     dsttmp=$dstdir/_inst.$$_
 257     rmtmp=$dstdir/_rm.$$_
 258
 259     # Trap to clean up those temp files at exit.
 260     trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
 261     trap '(exit $?); exit' 1 2 13 15
 262
 263     # Move or copy the file name to the temp name
 264     $doit $instcmd "$src" "$dsttmp" &&
 265
 266     # and set any options; do chmod last to preserve setuid bits.
 267     #
 268     # If any of these fail, we abort the whole thing.  If we want to
 269     # ignore errors from any of these, just make sure not to ignore
 270     # errors from the above "$doit $instcmd $src $dsttmp" command.
 271     #
 272     { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
 273       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
 274       && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
 275       && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
 276
 277     # Now remove or move aside any old file at destination location.  We
 278     # try this two ways since rm can't unlink itself on some systems and
 279     # the destination file might be busy for other reasons.  In this case,
 280     # the final cleanup might fail but the new file should still install
 281     # successfully.
 282     {
 283       if test -f "$dstdir/$dstfile"; then
 284         $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
 285         || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
 286         || {
 287           echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
 288           (exit 1); exit
 289         }
 290       else
 291         :
 292       fi
 293     } &&
 294
 295     # Now rename the file to the real destination.
 296     $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
 297   fi || { (exit 1); exit; }
 298 done
 299
 300 # The final little trick to "correctly" pass the exit status to the exit trap.
 301 {
 302   (exit 0); exit
 303 }
 304
 305 # Local variables:
 306 # eval: (add-hook 'write-file-hooks 'time-stamp)
 307 # time-stamp-start: "scriptversion="
 308 # time-stamp-format: "%:y-%02m-%02d.%02H"
 309 # time-stamp-end: "$"
 310 # End: