Makefile

   1 #
   2 # Asterisk -- A telephony toolkit for Linux.
   3 #
   4 # Top level Makefile
   5 #
   6 # Copyright (C) 1999-2006, Digium, Inc.
   7 #
   8 # Mark Spencer <markster@digium.com>
   9 #
  10 # This program is free software, distributed under the terms of
  11 # the GNU General Public License
  12 #
  13
  14 # All Makefiles use the following variables:
  15 #
  16 # ASTCFLAGS - compiler options
  17 # ASTLDFLAGS - linker flags (not libraries)
  18 # LIBS - additional libraries, at top-level for all links,
  19 #      on a single object just for that object
  20 # SOLINK - linker flags used only for creating shared objects (.so files),
  21 #      used for all .so links
  22 #
  23 # Initial values for ASTCFLAGS and ASTLDFLAGS can be specified in the
  24 # environment when running make, as follows:
  25 #
  26 #       $ ASTCFLAGS="-Werror" make ...
  27 #
  28 # note that this is different from
  29 #
  30 #       $ make ASTCFLAGS="-Werror" ...
  31 #
  32 # If you need to pass compiler/linker flags as 'make' variables, please use
  33 #
  34 #       $ make COPTS="..." LDOPTS="..." ...
  35 #
  36 #
  37 # You can add the path of local module subdirs from the command line with
  38 #   make LOCAL_MOD_SUBDIRS= ....
  39
  40 export ASTTOPDIR                # Top level dir, used in subdirs' Makefiles
  41 export ASTERISKVERSION
  42 export ASTERISKVERSIONNUM
  43
  44 #--- values used for default paths
  45
  46 # DESTDIR is the staging (or final) directory where files are copied
  47 # during the install process. Define it before 'export', otherwise
  48 # export will set it to the empty string making ?= fail.
  49 # WARNING: do not put spaces or comments after the value.
  50 DESTDIR?=$(INSTALL_PATH)
  51 export DESTDIR
  52
  53 export INSTALL_PATH     # Additional prefix for the following paths
  54 export ASTETCDIR                # Path for config files
  55 export ASTVARRUNDIR
  56 export MODULES_DIR
  57 export ASTSPOOLDIR
  58 export ASTVARLIBDIR
  59 export ASTDATADIR
  60 export ASTDBDIR
  61 export ASTLOGDIR
  62 export ASTLIBDIR
  63 export ASTMANDIR
  64 export ASTHEADERDIR
  65 export ASTBINDIR
  66 export ASTSBINDIR
  67 export AGI_DIR
  68 export ASTCONFPATH
  69
  70 export OSARCH                   # Operating system
  71 export PROC                     # Processor type
  72
  73 export NOISY_BUILD              # Used in Makefile.rules
  74 export MENUSELECT_CFLAGS        # Options selected in menuselect.
  75 export AST_DEVMODE              # Set to "yes" for additional compiler
  76                                 # and runtime checks
  77
  78 export SOLINK                   # linker flags for shared objects
  79 export STATIC_BUILD             # Additional cflags, set to -static
  80                                 # for static builds. Probably
  81                                 # should go directly to ASTLDFLAGS
  82
  83 #--- paths to various commands
  84 export CC
  85 export CXX
  86 export AR
  87 export RANLIB
  88 export HOST_CC
  89 export INSTALL
  90 export STRIP
  91 export DOWNLOAD
  92 export AWK
  93 export GREP
  94 export ID
  95
  96 # even though we could use '-include makeopts' here, use a wildcard
  97 # lookup anyway, so that make won't try to build makeopts if it doesn't
  98 # exist (other rules will force it to be built if needed)
  99 ifneq ($(wildcard makeopts),)
 100   include makeopts
 101 endif
 102
 103 # Some build systems, such as the one in openwrt, like to pass custom target
 104 # CFLAGS and LDFLAGS in the COPTS and LDOPTS variables.
 105 ASTCFLAGS+=$(COPTS)
 106 ASTLDFLAGS+=$(LDOPTS)
 107
 108 #Uncomment this to see all build commands instead of 'quiet' output
 109 #NOISY_BUILD=yes
 110
 111 empty:=
 112 space:=$(empty) $(empty)
 113 ASTTOPDIR:=$(subst $(space),\$(space),$(CURDIR))
 114
 115 # Overwite config files on "make samples"
 116 OVERWRITE=y
 117
 118 # Include debug and macro symbols in the executables (-g) and profiling info (-pg)
 119 DEBUG=-g3
 120
 121
 122 # Define standard directories for various platforms
 123 # These apply if they are not redefined in asterisk.conf
 124 ifeq ($(OSARCH),SunOS)
 125   ASTETCDIR=/var/etc/asterisk
 126   ASTLIBDIR=/opt/asterisk/lib
 127   ASTVARLIBDIR=/var/opt/asterisk
 128   ASTDBDIR=$(ASTVARLIBDIR)
 129   ASTKEYDIR=$(ASTVARLIBDIR)
 130   ASTSPOOLDIR=/var/spool/asterisk
 131   ASTLOGDIR=/var/log/asterisk
 132   ASTHEADERDIR=/opt/asterisk/include
 133   ASTBINDIR=/opt/asterisk/bin
 134   ASTSBINDIR=/opt/asterisk/sbin
 135   ASTVARRUNDIR=/var/run/asterisk
 136   ASTMANDIR=/opt/asterisk/man
 137 else
 138   ASTETCDIR=$(sysconfdir)/asterisk
 139   ASTLIBDIR=$(libdir)/asterisk
 140   ASTHEADERDIR=$(includedir)/asterisk
 141   ASTBINDIR=$(bindir)
 142   ASTSBINDIR=$(sbindir)
 143   ASTSPOOLDIR=$(localstatedir)/spool/asterisk
 144   ASTLOGDIR=$(localstatedir)/log/asterisk
 145   ASTVARRUNDIR=$(localstatedir)/run
 146   ASTMANDIR=$(mandir)
 147 ifneq ($(findstring BSD,$(OSARCH)),)
 148   ASTVARLIBDIR=$(prefix)/share/asterisk
 149   ASTVARRUNDIR=$(localstatedir)/run/asterisk
 150   ASTDBDIR=$(localstatedir)/db/asterisk
 151 else
 152   ASTVARLIBDIR=$(localstatedir)/lib/asterisk
 153   ASTDBDIR=$(ASTVARLIBDIR)
 154 endif
 155   ASTKEYDIR=$(ASTVARLIBDIR)
 156 endif
 157 ifeq ($(ASTDATADIR),)
 158   ASTDATADIR:=$(ASTVARLIBDIR)
 159 endif
 160
 161 # Asterisk.conf is located in ASTETCDIR or by using the -C flag
 162 # when starting Asterisk
 163 ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
 164 MODULES_DIR=$(ASTLIBDIR)/modules
 165 AGI_DIR=$(ASTDATADIR)/agi-bin
 166
 167 # If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
 168 HTTP_DOCSDIR=/var/www/html
 169 # Determine by a grep 'ScriptAlias' of your Apache httpd.conf file
 170 HTTP_CGIDIR=/var/www/cgi-bin
 171
 172 # Uncomment this to use the older DSP routines
 173 #ASTCFLAGS+=-DOLD_DSP_ROUTINES
 174
 175 # If the file .asterisk.makeopts is present in your home directory, you can
 176 # include all of your favorite menuselect options so that every time you download
 177 # a new version of Asterisk, you don't have to run menuselect to set them.
 178 # The file /etc/asterisk.makeopts will also be included but can be overridden
 179 # by the file in your home directory.
 180
 181 GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
 182 USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
 183
 184 MOD_SUBDIR_CFLAGS=-I$(ASTTOPDIR)/include
 185 OTHER_SUBDIR_CFLAGS=-I$(ASTTOPDIR)/include
 186
 187 # Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
 188 OPTIONS=
 189
 190 ifeq ($(OSARCH),linux-gnu)
 191   ifeq ($(PROC),x86_64)
 192     # You must have GCC 3.4 to use k8, otherwise use athlon
 193     PROC=k8
 194     #PROC=athlon
 195   endif
 196
 197   ifeq ($(PROC),sparc64)
 198     #The problem with sparc is the best stuff is in newer versions of gcc (post 3.0) only.
 199     #This works for even old (2.96) versions of gcc and provides a small boost either way.
 200     #A ultrasparc cpu is really v9 but the stock debian stable 3.0 gcc doesn't support it.
 201     #So we go lowest common available by gcc and go a step down, still a step up from
 202     #the default as we now have a better instruction set to work with. - Belgarath
 203     PROC=ultrasparc
 204     OPTIONS+=$(shell if $(CC) -mtune=$(PROC) -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mtune=$(PROC)"; fi)
 205     OPTIONS+=$(shell if $(CC) -mcpu=v8 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mcpu=v8"; fi)
 206     OPTIONS+=-fomit-frame-pointer
 207   endif
 208
 209   ifeq ($(PROC),arm)
 210     # The Cirrus logic is the only heavily shipping arm processor with a real floating point unit
 211     ifeq ($(SUB_PROC),maverick)
 212       OPTIONS+=-fsigned-char -mcpu=ep9312
 213     else
 214       ifeq ($(SUB_PROC),xscale)
 215         OPTIONS+=-fsigned-char -mcpu=xscale
 216       else
 217         OPTIONS+=-fsigned-char
 218       endif
 219     endif
 220   endif
 221 endif
 222
 223 ifeq ($(findstring -save-temps,$(ASTCFLAGS)),)
 224   ifeq ($(findstring -pipe,$(ASTCFLAGS)),)
 225     ASTCFLAGS+=-pipe
 226   endif
 227 endif
 228
 229 ifeq ($(findstring -Wall,$(ASTCFLAGS)),)
 230   ASTCFLAGS+=-Wall
 231 endif
 232
 233 ASTCFLAGS+=-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(DEBUG)
 234
 235 ASTCFLAGS+=-include $(ASTTOPDIR)/include/asterisk/autoconfig.h
 236
 237 ifeq ($(AST_DEVMODE),yes)
 238   ASTCFLAGS+=-Werror -Wunused -Wundef $(AST_DECLARATION_AFTER_STATEMENT) -Wmissing-format-attribute -Wformat-security #-Wformat=2
 239 endif
 240
 241 ifneq ($(findstring BSD,$(OSARCH)),)
 242   ASTCFLAGS+=-I/usr/local/include
 243   ASTLDFLAGS+=-L/usr/local/lib
 244 endif
 245
 246 ifeq ($(findstring -march,$(ASTCFLAGS)),)
 247   ifneq ($(PROC),ultrasparc)
 248     ASTCFLAGS+=$(shell if $(CC) -march=$(PROC) -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-march=$(PROC)"; fi)
 249   endif
 250 endif
 251
 252 ifeq ($(PROC),ppc)
 253   ASTCFLAGS+=-fsigned-char
 254 endif
 255
 256 ifeq ($(OSARCH),FreeBSD)
 257   # -V is understood by BSD Make, not by GNU make.
 258   BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
 259   ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
 260 endif
 261
 262 ifeq ($(OSARCH),NetBSD)
 263   ASTCFLAGS+=-pthread -I/usr/pkg/include
 264 endif
 265
 266 ifeq ($(OSARCH),OpenBSD)
 267   ASTCFLAGS+=-pthread
 268 endif
 269
 270 ifeq ($(OSARCH),SunOS)
 271   ASTCFLAGS+=-Wcast-align -DSOLARIS -I../include/solaris-compat -I/opt/ssl/include -I/usr/local/ssl/include -D_XPG4_2
 272 endif
 273
 274 ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) build_tools/make_version .)
 275
 276 ifneq ($(wildcard .version),)
 277   ASTERISKVERSIONNUM:=$(shell $(AWK) -F. '{printf "%01d%02d%02d", $$1, $$2, $$3}' .version)
 278   RPMVERSION:=$(shell sed 's/[-\/:]/_/g' .version)
 279 else
 280   RPMVERSION=unknown
 281 endif
 282
 283 ifneq ($(wildcard .svn),)
 284   ASTERISKVERSIONNUM:=999999
 285 endif
 286
 287 # XXX MALLOC_DEBUG is probably unused, Makefile.moddir_rules adds the
 288 #       value directly to ASTCFLAGS
 289 ASTCFLAGS+=$(MALLOC_DEBUG)$(OPTIONS)
 290
 291 MOD_SUBDIRS:=channels pbx apps codecs formats cdr funcs tests main res $(LOCAL_MOD_SUBDIRS)
 292 OTHER_SUBDIRS:=utils agi
 293 SUBDIRS:=$(OTHER_SUBDIRS) $(MOD_SUBDIRS)
 294 SUBDIRS_INSTALL:=$(SUBDIRS:%=%-install)
 295 SUBDIRS_CLEAN:=$(SUBDIRS:%=%-clean)
 296 SUBDIRS_DIST_CLEAN:=$(SUBDIRS:%=%-dist-clean)
 297 SUBDIRS_UNINSTALL:=$(SUBDIRS:%=%-uninstall)
 298 MOD_SUBDIRS_EMBED_LDSCRIPT:=$(MOD_SUBDIRS:%=%-embed-ldscript)
 299 MOD_SUBDIRS_EMBED_LDFLAGS:=$(MOD_SUBDIRS:%=%-embed-ldflags)
 300 MOD_SUBDIRS_EMBED_LIBS:=$(MOD_SUBDIRS:%=%-embed-libs)
 301 MOD_SUBDIRS_MENUSELECT_TREE:=$(MOD_SUBDIRS:%=%-menuselect-tree)
 302
 303 ifneq ($(findstring darwin,$(OSARCH)),)
 304   ASTCFLAGS+=-D__Darwin__
 305   SOLINK=-dynamic -bundle -undefined suppress -force_flat_namespace
 306 else
 307 # These are used for all but Darwin
 308   SOLINK=-shared -Xlinker -x
 309   ifneq ($(findstring BSD,$(OSARCH)),)
 310     LDFLAGS+=-L/usr/local/lib
 311   endif
 312 endif
 313
 314 ifeq ($(OSARCH),SunOS)
 315   SOLINK=-shared -fpic -L/usr/local/ssl/lib -lrt
 316 endif
 317
 318 # comment to print directories during submakes
 319 #PRINT_DIR=yes
 320
 321 SILENTMAKE:=$(MAKE) --quiet --no-print-directory
 322 ifneq ($(PRINT_DIR)$(NOISY_BUILD),)
 323 SUBMAKE:=$(MAKE)
 324 else
 325 SUBMAKE:=$(MAKE) --quiet --no-print-directory
 326 endif
 327
 328 # This is used when generating the doxygen documentation
 329 ifneq ($(DOT),:)
 330   HAVEDOT=yes
 331 else
 332   HAVEDOT=no
 333 endif
 334
 335 # $(MAKE) is printed in several places, and we want it to be a
 336 # fixed size string. Define a variable whose name has also the
 337 # same size, so we can easily align text.
 338 ifeq ($(MAKE), gmake)
 339         mK="gmake"
 340 else
 341         mK=" make"
 342 endif
 343
 344 all: _all
 345         @echo " +--------- Asterisk Build Complete ---------+"
 346         @echo " + Asterisk has successfully been built, and +"
 347         @echo " + can be installed by running:              +"
 348         @echo " +                                           +"
 349         @echo " +               $(mK) install               +"
 350         @echo " +-------------------------------------------+"
 351
 352 _all: cleantest makeopts $(SUBDIRS)
 353
 354 makeopts: configure
 355         @echo "****"
 356         @echo "**** The configure script must be executed before running '$(MAKE)'."
 357         @echo "****               Please run \"./configure\"."
 358         @echo "****"
 359         @exit 1
 360
 361 menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts
 362         menuselect/menuselect --check-deps menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
 363
 364 $(MOD_SUBDIRS_EMBED_LDSCRIPT):
 365         @echo "EMBED_LDSCRIPTS+="`$(SILENTMAKE) -C $(@:-embed-ldscript=) SUBDIR=$(@:-embed-ldscript=) __embed_ldscript` >> makeopts.embed_rules
 366
 367 $(MOD_SUBDIRS_EMBED_LDFLAGS):
 368         @echo "EMBED_LDFLAGS+="`$(SILENTMAKE) -C $(@:-embed-ldflags=) SUBDIR=$(@:-embed-ldflags=) __embed_ldflags` >> makeopts.embed_rules
 369
 370 $(MOD_SUBDIRS_EMBED_LIBS):
 371         @echo "EMBED_LIBS+="`$(SILENTMAKE) -C $(@:-embed-libs=) SUBDIR=$(@:-embed-libs=) __embed_libs` >> makeopts.embed_rules
 372
 373 $(MOD_SUBDIRS_MENUSELECT_TREE):
 374         @$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) moduleinfo
 375         @$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) makeopts
 376
 377 makeopts.embed_rules: menuselect.makeopts
 378         @echo "Generating embedded module rules ..."
 379         @rm -f $@
 380         @$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDSCRIPT)
 381         @$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LDFLAGS)
 382         @$(SUBMAKE) $(MOD_SUBDIRS_EMBED_LIBS)
 383
 384 $(SUBDIRS): main/version.c include/asterisk/version.h include/asterisk/build.h include/asterisk/buildopts.h defaults.h makeopts.embed_rules
 385
 386 ifeq ($(findstring $(OSARCH), mingw32 cygwin ),)
 387     # Non-windows:
 388     # ensure that all module subdirectories are processed before 'main' during
 389     # a parallel build, since if there are modules selected to be embedded the
 390     # directories containing them must be completed before the main Asterisk
 391     # binary can be built
 392 main: $(filter-out main,$(MOD_SUBDIRS))
 393 else
 394     # Windows: we need to build main (i.e. the asterisk dll) first,
 395     # followed by res, followed by the other directories, because
 396     # dll symbols must be resolved during linking and not at runtime.
 397 D1:= $(filter-out main,$(MOD_SUBDIRS))
 398 D1:= $(filter-out res,$(D1))
 399
 400 $(D1): res
 401 res:    main
 402 endif
 403
 404 $(MOD_SUBDIRS):
 405         @ASTCFLAGS="$(MOD_SUBDIR_CFLAGS) $(ASTCFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
 406
 407 $(OTHER_SUBDIRS):
 408         @ASTCFLAGS="$(OTHER_SUBDIR_CFLAGS) $(ASTCFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(SUBMAKE) --no-builtin-rules -C $@ SUBDIR=$@ all
 409
 410 defaults.h: makeopts
 411         @build_tools/make_defaults_h > $@.tmp
 412         @cmp -s $@.tmp $@ || mv $@.tmp $@
 413         @rm -f $@.tmp
 414
 415 main/version.c: FORCE
 416         @build_tools/make_version_c > $@.tmp
 417         @cmp -s $@.tmp $@ || mv $@.tmp $@
 418         @rm -f $@.tmp
 419
 420 include/asterisk/version.h: FORCE
 421         @build_tools/make_version_h > $@.tmp
 422         @cmp -s $@.tmp $@ || mv $@.tmp $@
 423         @rm -f $@.tmp
 424
 425 include/asterisk/buildopts.h: menuselect.makeopts
 426         @build_tools/make_buildopts_h > $@.tmp
 427         @cmp -s $@.tmp $@ || mv $@.tmp $@
 428         @rm -f $@.tmp
 429
 430 include/asterisk/build.h:
 431         @build_tools/make_build_h > $@.tmp
 432         @cmp -s $@.tmp $@ || mv $@.tmp $@
 433         @rm -f $@.tmp
 434
 435 $(SUBDIRS_CLEAN):
 436         @$(SUBMAKE) -C $(@:-clean=) clean
 437
 438 $(SUBDIRS_DIST_CLEAN):
 439         @$(SUBMAKE) -C $(@:-dist-clean=) dist-clean
 440
 441 clean: $(SUBDIRS_CLEAN)
 442         rm -f defaults.h
 443         rm -f include/asterisk/build.h
 444         rm -f main/version.c
 445         rm -f include/asterisk/version.h
 446         @$(MAKE) -C menuselect clean
 447         cp -f .cleancount .lastclean
 448
 449 dist-clean: distclean
 450
 451 distclean: $(SUBDIRS_DIST_CLEAN) clean
 452         @$(MAKE) -C menuselect dist-clean
 453         @$(MAKE) -C sounds dist-clean
 454         rm -f menuselect.makeopts makeopts menuselect-tree menuselect.makedeps
 455         rm -f makeopts.embed_rules
 456         rm -f config.log config.status config.cache
 457         rm -rf autom4te.cache
 458         rm -f include/asterisk/autoconfig.h
 459         rm -f include/asterisk/buildopts.h
 460         rm -rf doc/api
 461         rm -f build_tools/menuselect-deps
 462
 463 datafiles: _all
 464         if [ x`$(ID) -un` = xroot ]; then CFLAGS="$(ASTCFLAGS)" sh build_tools/mkpkgconfig $(DESTDIR)/usr/lib/pkgconfig; fi
 465 # Should static HTTP be installed during make samples or even with its own target ala
 466 # webvoicemail?  There are portions here that *could* be customized but might also be
 467 # improved a lot.  I'll put it here for now.
 468         mkdir -p $(DESTDIR)$(ASTDATADIR)/static-http
 469         for x in static-http/*; do \
 470                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTDATADIR)/static-http ; \
 471         done
 472         if [ -d doc/tex/asterisk ] ; then \
 473                         mkdir -p $(DESTDIR)$(ASTDATADIR)/static-http/docs ; \
 474                         for n in doc/tex/asterisk/* ; do \
 475                                 $(INSTALL) -m 644 $$n $(DESTDIR)$(ASTDATADIR)/static-http/docs ; \
 476                         done \
 477         fi
 478         mkdir -p $(DESTDIR)$(ASTDATADIR)/images
 479         for x in images/*.jpg; do \
 480                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTDATADIR)/images ; \
 481         done
 482         mkdir -p $(DESTDIR)$(AGI_DIR)
 483         $(MAKE) -C sounds install
 484
 485 update:
 486         @if [ -d .svn ]; then \
 487                 echo "Updating from Subversion..." ; \
 488                 fromrev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
 489                 svn update | tee update.out; \
 490                 torev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
 491                 echo "`date`  Updated from revision $${fromrev} to $${torev}." >> update.log; \
 492                 rm -f .version; \
 493                 if [ `grep -c ^C update.out` -gt 0 ]; then \
 494                         echo ; echo "The following files have conflicts:" ; \
 495                         grep ^C update.out | cut -b4- ; \
 496                 fi ; \
 497                 rm -f update.out; \
 498         else \
 499                 echo "Not under version control";  \
 500         fi
 501
 502 NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
 503 OLDHEADERS=$(filter-out $(NEWHEADERS),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
 504
 505 installdirs:
 506         mkdir -p $(DESTDIR)$(MODULES_DIR)
 507         mkdir -p $(DESTDIR)$(ASTSBINDIR)
 508         mkdir -p $(DESTDIR)$(ASTETCDIR)
 509         mkdir -p $(DESTDIR)$(ASTBINDIR)
 510         mkdir -p $(DESTDIR)$(ASTVARRUNDIR)
 511         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/voicemail
 512         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/dictate
 513         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/system
 514         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/tmp
 515         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/meetme
 516         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/monitor
 517
 518 bininstall: _all installdirs $(SUBDIRS_INSTALL)
 519         $(INSTALL) -m 755 main/asterisk $(DESTDIR)$(ASTSBINDIR)/
 520         $(LN) -sf asterisk $(DESTDIR)$(ASTSBINDIR)/rasterisk
 521         $(INSTALL) -m 755 contrib/scripts/astgenkey $(DESTDIR)$(ASTSBINDIR)/
 522         $(INSTALL) -m 755 contrib/scripts/autosupport $(DESTDIR)$(ASTSBINDIR)/
 523         if [ ! -f $(DESTDIR)$(ASTSBINDIR)/safe_asterisk ]; then \
 524                 cat contrib/scripts/safe_asterisk | sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)$(ASTSBINDIR)/safe_asterisk ;\
 525                 chmod 755 $(DESTDIR)$(ASTSBINDIR)/safe_asterisk;\
 526         fi
 527         $(INSTALL) -d $(DESTDIR)$(ASTHEADERDIR)
 528         $(INSTALL) -m 644 include/asterisk.h $(DESTDIR)$(includedir)
 529         $(INSTALL) -m 644 include/asterisk/*.h $(DESTDIR)$(ASTHEADERDIR)
 530         if [ -n "$(OLDHEADERS)" ]; then \
 531                 rm -f $(addprefix $(DESTDIR)$(ASTHEADERDIR)/,$(OLDHEADERS)) ;\
 532         fi
 533         mkdir -p $(DESTDIR)$(ASTLOGDIR)/cdr-csv
 534         mkdir -p $(DESTDIR)$(ASTLOGDIR)/cdr-custom
 535         mkdir -p $(DESTDIR)$(ASTDATADIR)/keys
 536         mkdir -p $(DESTDIR)$(ASTDATADIR)/firmware
 537         mkdir -p $(DESTDIR)$(ASTDATADIR)/firmware/iax
 538         mkdir -p $(DESTDIR)$(ASTMANDIR)/man8
 539         $(INSTALL) -m 644 keys/iaxtel.pub $(DESTDIR)$(ASTDATADIR)/keys
 540         $(INSTALL) -m 644 keys/freeworlddialup.pub $(DESTDIR)$(ASTDATADIR)/keys
 541         $(INSTALL) -m 644 doc/asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
 542         $(INSTALL) -m 644 contrib/scripts/astgenkey.8 $(DESTDIR)$(ASTMANDIR)/man8
 543         $(INSTALL) -m 644 contrib/scripts/autosupport.8 $(DESTDIR)$(ASTMANDIR)/man8
 544         $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
 545         if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
 546                 $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin $(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin; \
 547         fi
 548
 549 $(SUBDIRS_INSTALL):
 550         @DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" $(SUBMAKE) -C $(@:-install=) install
 551
 552 NEWMODS:=$(foreach d,$(MOD_SUBDIRS),$(notdir $(wildcard $(d)/*.so)))
 553 OLDMODS=$(filter-out $(NEWMODS),$(notdir $(wildcard $(DESTDIR)$(MODULES_DIR)/*.so)))
 554
 555 oldmodcheck:
 556         @if [ -n "$(OLDMODS)" ]; then \
 557                 echo " WARNING WARNING WARNING" ;\
 558                 echo "" ;\
 559                 echo " Your Asterisk modules directory, located at" ;\
 560                 echo " $(DESTDIR)$(MODULES_DIR)" ;\
 561                 echo " contains modules that were not installed by this " ;\
 562                 echo " version of Asterisk. Please ensure that these" ;\
 563                 echo " modules are compatible with this version before" ;\
 564                 echo " attempting to run Asterisk." ;\
 565                 echo "" ;\
 566                 for f in $(OLDMODS); do \
 567                         echo "    $$f" ;\
 568                 done ;\
 569                 echo "" ;\
 570                 echo " WARNING WARNING WARNING" ;\
 571         fi
 572
 573 badshell:
 574 ifneq ($(findstring ~,$(DESTDIR)),)
 575         @echo "Your shell doesn't do ~ expansion when expected (specifically, when doing \"make install DESTDIR=~/path\")."
 576         @echo "Try replacing ~ with \$$HOME, as in \"make install DESTDIR=\$$HOME/path\"."
 577         @exit 1
 578 endif
 579
 580 install: badshell datafiles bininstall
 581         @if [ -x /usr/sbin/asterisk-post-install ]; then \
 582                 /usr/sbin/asterisk-post-install $(DESTDIR) . ; \
 583         fi
 584         @echo " +---- Asterisk Installation Complete -------+"
 585         @echo " +                                           +"
 586         @echo " +    YOU MUST READ THE SECURITY DOCUMENT    +"
 587         @echo " +                                           +"
 588         @echo " + Asterisk has successfully been installed. +"
 589         @echo " + If you would like to install the sample   +"
 590         @echo " + configuration files (overwriting any      +"
 591         @echo " + existing config files), run:              +"
 592         @echo " +                                           +"
 593         @echo " +               $(mK) samples               +"
 594         @echo " +                                           +"
 595         @echo " +-----------------  or ---------------------+"
 596         @echo " +                                           +"
 597         @echo " + You can go ahead and install the asterisk +"
 598         @echo " + program documentation now or later run:   +"
 599         @echo " +                                           +"
 600         @echo " +              $(mK) progdocs               +"
 601         @echo " +                                           +"
 602         @echo " + **Note** This requires that you have      +"
 603         @echo " + doxygen installed on your local system    +"
 604         @echo " +-------------------------------------------+"
 605         @$(MAKE) -s oldmodcheck
 606
 607 upgrade: bininstall
 608
 609 # XXX why *.adsi is installed first ?
 610 adsi:
 611         @echo Installing adsi config files...
 612         @mkdir -p $(DESTDIR)$(ASTETCDIR)
 613         @for x in configs/*.adsi; do \
 614                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
 615                 if [ -f $${dst} ] ; then \
 616                         echo "Overwriting $$x" ; \
 617                 else \
 618                         echo "Installing $$x" ; \
 619                 fi ; \
 620                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x` ; \
 621         done
 622
 623 samples: adsi
 624         @echo Installing other config files...
 625         @mkdir -p $(DESTDIR)$(ASTETCDIR)
 626         @for x in configs/*.sample; do \
 627                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x .sample`" ;        \
 628                 if [ -f $${dst} ]; then \
 629                         if [ "$(OVERWRITE)" = "y" ]; then \
 630                                 if cmp -s $${dst} $$x ; then \
 631                                         echo "Config file $$x is unchanged"; \
 632                                         continue; \
 633                                 fi ; \
 634                                 mv -f $${dst} $${dst}.old ; \
 635                         else \
 636                                 echo "Skipping config file $$x"; \
 637                                 continue; \
 638                         fi ;\
 639                 fi ; \
 640                 echo "Installing file $$x"; \
 641                 $(INSTALL) -m 644 $$x $${dst} ;\
 642         done
 643         @if [ "$(OVERWRITE)" = "y" ] || [ ! -f $(DESTDIR)$(ASTCONFPATH) ]; then \
 644                 echo "Creating asterisk.conf"; \
 645                 ( \
 646                 echo "[directories](!) ; remove the (!) to enable this" ; \
 647                 echo "astetcdir => $(ASTETCDIR)" ; \
 648                 echo "astmoddir => $(MODULES_DIR)" ; \
 649                 echo "astvarlibdir => $(ASTVARLIBDIR)" ; \
 650                 echo "astdbdir => $(ASTDBDIR)" ; \
 651                 echo "astkeydir => $(ASTKEYDIR)" ; \
 652                 echo "astdatadir => $(ASTDATADIR)" ; \
 653                 echo "astagidir => $(AGI_DIR)" ; \
 654                 echo "astspooldir => $(ASTSPOOLDIR)" ; \
 655                 echo "astrundir => $(ASTVARRUNDIR)" ; \
 656                 echo "astlogdir => $(ASTLOGDIR)" ; \
 657                 echo "" ; \
 658                 echo ";[options]" ; \
 659                 echo ";verbose = 3" ; \
 660                 echo ";debug = 3" ; \
 661                 echo ";alwaysfork = yes ; same as -F at startup" ; \
 662                 echo ";nofork = yes ; same as -f at startup" ; \
 663                 echo ";quiet = yes ; same as -q at startup" ; \
 664                 echo ";timestamp = yes ; same as -T at startup" ; \
 665                 echo ";execincludes = yes ; support #exec in config files" ; \
 666                 echo ";console = yes ; Run as console (same as -c at startup)" ; \
 667                 echo ";highpriority = yes ; Run realtime priority (same as -p at startup)" ; \
 668                 echo ";initcrypto = yes ; Initialize crypto keys (same as -i at startup)" ; \
 669                 echo ";nocolor = yes ; Disable console colors" ; \
 670                 echo ";dontwarn = yes ; Disable some warnings" ; \
 671                 echo ";dumpcore = yes ; Dump core on crash (same as -g at startup)" ; \
 672                 echo ";languageprefix = yes ; Use the new sound prefix path syntax" ; \
 673                 echo ";internal_timing = yes" ; \
 674                 echo ";systemname = my_system_name ; prefix uniqueid with a system name for global uniqueness issues" ; \
 675                 echo ";autosystemname = yes ; automatically set systemname to hostname - uses 'localhost' on failure, or systemname if set" ; \
 676                 echo ";maxcalls = 10 ; Maximum amount of calls allowed" ; \
 677                 echo ";maxload = 0.9 ; Asterisk stops accepting new calls if the load average exceed this limit" ; \
 678                 echo ";maxfiles = 1000 ; Maximum amount of openfiles" ; \
 679                 echo ";minmemfree = 1 ; in MBs, Asterisk stops accepting new calls if the amount of free memory falls below this watermark" ; \
 680                 echo ";cache_record_files = yes ; Cache recorded sound files to another directory during recording" ; \
 681                 echo ";record_cache_dir = /tmp ; Specify cache directory (used in cnjunction with cache_record_files)" ; \
 682                 echo ";transmit_silence_during_record = yes ; Transmit SLINEAR silence while a channel is being recorded" ; \
 683                 echo ";transmit_silence = yes ; Transmit SLINEAR silence while a channel is being recorded or DTMF is being generated" ; \
 684                 echo ";transcode_via_sln = yes ; Build transcode paths via SLINEAR, instead of directly" ; \
 685                 echo ";runuser = asterisk ; The user to run as" ; \
 686                 echo ";rungroup = asterisk ; The group to run as" ; \
 687                 echo "" ; \
 688                 echo "; Changing the following lines may compromise your security." ; \
 689                 echo ";[files]" ; \
 690                 echo ";astctlpermissions = 0660" ; \
 691                 echo ";astctlowner = root" ; \
 692                 echo ";astctlgroup = apache" ; \
 693                 echo ";astctl = asterisk.ctl" ; \
 694                 echo "" ; \
 695                 echo "[compat]" ; \
 696                 echo "pbx_realtime=1.6" ; \
 697                 echo "res_agi=1.6" ; \
 698                 echo "app_set=1.6" ; \
 699                 ) > $(DESTDIR)$(ASTCONFPATH) ; \
 700         else \
 701                 echo "Skipping asterisk.conf creation"; \
 702         fi
 703         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX
 704         build_tools/make_sample_voicemail $(DESTDIR)/$(ASTDATADIR) $(DESTDIR)/$(ASTSPOOLDIR)
 705         @mkdir -p $(DESTDIR)$(ASTDATADIR)/phoneprov
 706         @for x in phoneprov/*; do \
 707                 dst="$(DESTDIR)$(ASTDATADIR)/$$x" ;     \
 708                 if [ -f $${dst} ]; then \
 709                         if [ "$(OVERWRITE)" = "y" ]; then \
 710                                 if cmp -s $${dst} $$x ; then \
 711                                         echo "Config file $$x is unchanged"; \
 712                                         continue; \
 713                                 fi ; \
 714                                 mv -f $${dst} $${dst}.old ; \
 715                         else \
 716                                 echo "Skipping config file $$x"; \
 717                                 continue; \
 718                         fi ;\
 719                 fi ; \
 720                 echo "Installing file $$x"; \
 721                 $(INSTALL) -m 644 $$x $${dst} ;\
 722         done
 723
 724 webvmail:
 725         @[ -d $(DESTDIR)$(HTTP_DOCSDIR)/ ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
 726         @[ -d $(DESTDIR)$(HTTP_CGIDIR) ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
 727         $(INSTALL) -m 4755 -o root -g root contrib/scripts/vmail.cgi $(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi
 728         mkdir -p $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk
 729         for x in images/*.gif; do \
 730                 $(INSTALL) -m 644 $$x $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/; \
 731         done
 732         @echo " +--------- Asterisk Web Voicemail ----------+"
 733         @echo " +                                           +"
 734         @echo " + Asterisk Web Voicemail is installed in    +"
 735         @echo " + your cgi-bin directory:                   +"
 736         @echo " + $(DESTDIR)$(HTTP_CGIDIR)"
 737         @echo " + IT USES A SETUID ROOT PERL SCRIPT, SO     +"
 738         @echo " + IF YOU DON'T LIKE THAT, UNINSTALL IT!     +"
 739         @echo " +                                           +"
 740         @echo " + Other static items have been stored in:   +"
 741         @echo " + $(DESTDIR)$(HTTP_DOCSDIR)"
 742         @echo " +                                           +"
 743         @echo " + If these paths do not match your httpd    +"
 744         @echo " + installation, correct the definitions     +"
 745         @echo " + in your Makefile of HTTP_CGIDIR and       +"
 746         @echo " + HTTP_DOCSDIR                              +"
 747         @echo " +                                           +"
 748         @echo " +-------------------------------------------+"
 749
 750 spec:
 751         sed "s/^Version:.*/Version: $(RPMVERSION)/g" redhat/asterisk.spec > asterisk.spec ; \
 752
 753 rpm: __rpm
 754
 755 __rpm: main/version.c include/asterisk/version.h include/asterisk/buildopts.h spec
 756         rm -rf /tmp/asterisk ; \
 757         mkdir -p /tmp/asterisk/redhat/RPMS/i386 ; \
 758         $(MAKE) DESTDIR=/tmp/asterisk install ; \
 759         $(MAKE) DESTDIR=/tmp/asterisk samples ; \
 760         mkdir -p /tmp/asterisk/etc/rc.d/init.d ; \
 761         cp -f contrib/init.d/rc.redhat.asterisk /tmp/asterisk/etc/rc.d/init.d/asterisk ; \
 762         rpmbuild --rcfile /usr/lib/rpm/rpmrc:redhat/rpmrc -bb asterisk.spec
 763
 764 progdocs:
 765         (cat contrib/asterisk-ng-doxygen; echo "HAVE_DOT=$(HAVEDOT)"; \
 766         echo "PROJECT_NUMBER=$(ASTERISKVERSION)") | doxygen -
 767
 768 install-logrotate:
 769         if [ ! -d $(ASTETCDIR)/../logrotate.d ]; then \
 770                 mkdir $(ASTETCDIR)/../logrotate.d ; \
 771         fi
 772         sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
 773         install -m 0644 contrib/scripts/asterisk.logrotate.tmp $(ASTETCDIR)/../logrotate.d/asterisk
 774         rm -f contrib/scripts/asterisk.logrotate.tmp
 775
 776 config:
 777         @if [ "${OSARCH}" = "linux-gnu" ]; then \
 778                 if [ -f /etc/redhat-release -o -f /etc/fedora-release ]; then \
 779                         $(INSTALL) -m 755 contrib/init.d/rc.redhat.asterisk $(DESTDIR)/etc/rc.d/init.d/asterisk; \
 780                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
 781                 elif [ -f /etc/debian_version ]; then \
 782                         $(INSTALL) -m 755 contrib/init.d/rc.debian.asterisk $(DESTDIR)/etc/init.d/asterisk; \
 783                         if [ -z "$(DESTDIR)" ]; then /usr/sbin/update-rc.d asterisk start 50 2 3 4 5 . stop 91 2 3 4 5 .; fi; \
 784                 elif [ -f /etc/gentoo-release ]; then \
 785                         $(INSTALL) -m 755 contrib/init.d/rc.gentoo.asterisk $(DESTDIR)/etc/init.d/asterisk; \
 786                         if [ -z "$(DESTDIR)" ]; then /sbin/rc-update add asterisk default; fi; \
 787                 elif [ -f /etc/mandrake-release -o -f /etc/mandriva-release ]; then \
 788                         $(INSTALL) -m 755 contrib/init.d/rc.mandriva.asterisk $(DESTDIR)/etc/rc.d/init.d/asterisk; \
 789                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
 790                 elif [ -f /etc/SuSE-release -o -f /etc/novell-release ]; then \
 791                         $(INSTALL) -m 755 contrib/init.d/rc.suse.asterisk $(DESTDIR)/etc/init.d/asterisk; \
 792                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
 793                 elif [ -f /etc/slackware-version ]; then \
 794                         echo "Slackware is not currently supported, although an init script does exist for it." \
 795                 else \
 796                         echo "We could not install init scripts for your distribution."; \
 797                 fi \
 798         else \
 799                 echo "We could not install init scripts for your operating system."; \
 800         fi
 801
 802 sounds:
 803         $(MAKE) -C sounds all
 804
 805 # If the cleancount has been changed, force a make clean.
 806 # .cleancount is the global clean count, and .lastclean is the
 807 # last clean count we had
 808
 809 cleantest:
 810         @cmp -s .cleancount .lastclean || $(MAKE) clean
 811
 812 $(SUBDIRS_UNINSTALL):
 813         @$(SUBMAKE) -C $(@:-uninstall=) uninstall
 814
 815 _uninstall: $(SUBDIRS_UNINSTALL)
 816         rm -f $(DESTDIR)$(MODULES_DIR)/*
 817         rm -f $(DESTDIR)$(ASTSBINDIR)/*asterisk*
 818         rm -f $(DESTDIR)$(ASTSBINDIR)/astgenkey
 819         rm -f $(DESTDIR)$(ASTSBINDIR)/autosupport
 820         rm -rf $(DESTDIR)$(ASTHEADERDIR)
 821         rm -rf $(DESTDIR)$(ASTDATADIR)/firmware
 822         rm -f $(DESTDIR)$(ASTMANDIR)/man8/asterisk.8
 823         rm -f $(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8
 824         rm -f $(DESTDIR)$(ASTMANDIR)/man8/autosupport.8
 825         rm -f $(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8
 826         $(MAKE) -C sounds uninstall
 827
 828 uninstall: _uninstall
 829         @echo " +--------- Asterisk Uninstall Complete -----+"
 830         @echo " + Asterisk binaries, sounds, man pages,     +"
 831         @echo " + headers, modules, and firmware builds,    +"
 832         @echo " + have all been uninstalled.                +"
 833         @echo " +                                           +"
 834         @echo " + To remove ALL traces of Asterisk,         +"
 835         @echo " + including configuration, spool            +"
 836         @echo " + directories, and logs, run the following  +"
 837         @echo " + command:                                  +"
 838         @echo " +                                           +"
 839         @echo " +            $(mK) uninstall-all            +"
 840         @echo " +-------------------------------------------+"
 841
 842 uninstall-all: _uninstall
 843         rm -rf $(DESTDIR)$(ASTLIBDIR)
 844         rm -rf $(DESTDIR)$(ASTVARLIBDIR)
 845         rm -rf $(DESTDIR)$(ASTDATADIR)
 846         rm -rf $(DESTDIR)$(ASTSPOOLDIR)
 847         rm -rf $(DESTDIR)$(ASTETCDIR)
 848         rm -rf $(DESTDIR)$(ASTLOGDIR)
 849
 850 menuconfig: menuselect
 851
 852 cmenuconfig: cmenuselect
 853
 854 gmenuconfig: gmenuselect
 855
 856 nmenuconfig: nmenuselect
 857
 858 menuselect: menuselect/cmenuselect menuselect/nmenuselect menuselect/gmenuselect
 859         @if [ -x menuselect/nmenuselect ]; then \
 860                 $(MAKE) nmenuselect; \
 861         elif [ -x menuselect/cmenuselect ]; then \
 862                 $(MAKE) cmenuselect; \
 863         elif [ -x menuselect/gmenuselect ]; then \
 864                 $(MAKE) gmenuselect; \
 865         else \
 866                 echo "No menuselect user interface found. Install ncurses,"; \
 867                 echo "newt or GTK libraries to build one and re-rerun"; \
 868                 echo "'make menuselect'."; \
 869         fi
 870
 871 cmenuselect: menuselect/cmenuselect menuselect-tree
 872         -@menuselect/cmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
 873
 874 gmenuselect: menuselect/gmenuselect menuselect-tree
 875         -@menuselect/gmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
 876
 877 nmenuselect: menuselect/nmenuselect menuselect-tree
 878         -@menuselect/nmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
 879
 880 # options for make in menuselect/
 881 MAKE_MENUSELECT=CC="$(HOST_CC)" CXX="$(CXX)" LD="" AR="" RANLIB="" CFLAGS="" $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
 882
 883 menuselect/menuselect: menuselect/makeopts
 884         $(MAKE_MENUSELECT) menuselect
 885
 886 menuselect/cmenuselect: menuselect/makeopts
 887         $(MAKE_MENUSELECT) cmenuselect
 888
 889 menuselect/gmenuselect: menuselect/makeopts
 890         $(MAKE_MENUSELECT) gmenuselect
 891
 892 menuselect/nmenuselect: menuselect/makeopts
 893         $(MAKE_MENUSELECT) nmenuselect
 894
 895 menuselect/makeopts: makeopts
 896         $(MAKE_MENUSELECT) makeopts
 897
 898 menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml build_tools/embed_modules.xml configure
 899         @echo "Generating input for menuselect ..."
 900         @echo "<?xml version=\"1.0\"?>" > $@
 901         @echo >> $@
 902         @echo "<menu name=\"Asterisk Module and Build Option Selection\">" >> $@
 903         @for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SUBMAKE) -C $${dir} SUBDIR=$${dir} moduleinfo >> $@; done
 904         @cat build_tools/cflags.xml >> $@
 905         @for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SUBMAKE) -C $${dir} SUBDIR=$${dir} makeopts >> $@; done
 906         @if [ "${AST_DEVMODE}" = "yes" ]; then \
 907                 cat build_tools/cflags-devmode.xml >> $@; \
 908         fi
 909         @cat build_tools/embed_modules.xml >> $@
 910         @cat sounds/sounds.xml >> $@
 911         @echo "</menu>" >> $@
 912
 913 pdf: asterisk.pdf
 914 asterisk.pdf:
 915         $(MAKE) -C doc/tex asterisk.pdf
 916
 917 .PHONY: menuselect menuselect.makeopts main sounds clean dist-clean distclean all prereqs cleantest uninstall _uninstall uninstall-all pdf dont-optimize $(SUBDIRS_INSTALL) $(SUBDIRS_DIST_CLEAN) $(SUBDIRS_CLEAN) $(SUBDIRS_UNINSTALL) $(SUBDIRS) $(MOD_SUBDIRS_EMBED_LDSCRIPT) $(MOD_SUBDIRS_EMBED_LDFLAGS) $(MOD_SUBDIRS_EMBED_LIBS) badshell installdirs
 918
 919 FORCE:
 920