2 ; MGCP Configuration for Asterisk
8 ;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
9 ; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
10 ; MGCP channel. Defaults to "no". An enabled jitterbuffer will
11 ; be used only if the sending side can create and the receiving
12 ; side can not accept jitter. The MGCP channel can accept jitter,
13 ; thus an enabled jitterbuffer on the receive MGCP side will only
14 ; be used if the sending side can create jitter and jbforce is
17 ; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a MGCP
18 ; channel. Defaults to "no".
20 ; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
22 ; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
23 ; resynchronized. Useful to improve the quality of the voice, with
24 ; big jumps in/broken timestamps, usually sent from exotic devices
25 ; and programs. Defaults to 1000.
27 ; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a MGCP
28 ; channel. Two implementations are currently available - "fixed"
29 ; (with size always equals to jbmax-size) and "adaptive" (with
30 ; variable size, actually the new jb of IAX2). Defaults to fixed.
32 ; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
33 ;-----------------------------------------------------------------------------------
42 ;; The MGCP channel supports the following service codes:
44 ;; *67 - Calling Number Delivery Blocking
45 ;; *70 - Cancel Call Waiting
46 ;; *72 - Call Forwarding Activation
47 ;; *73 - Call Forwarding Deactivation
48 ;; *78 - Do Not Disturb Activation
49 ;; *79 - Do Not Disturb Deactivation
52 ; known to work with Swissvoice IP10s
56 ;callerid = "John Doe" <123>
57 ;callgroup=0 ; in the range from 0 to 63
58 ;pickupgroup=0 ; in the range from 0 to 63
61 ;transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer
62 ;callwaiting=yes ; this might be a cause of trouble for ip10s
69 ; Supporting the DPH100M requires defining DLINK_BUGGY_FIRMWARE in
70 ; chan_mgcp.c in addition to enabling the slowsequence mode due to
71 ; bugs in the D-Link firmware
75 ;dtmfmode=none ; DTMF Mode can be 'none', 'rfc2833', or 'inband' or
76 ; 'hybrid' which starts in none and moves to inband. Default is none.
77 ;slowsequence=yes ; The DPH100M does not follow MGCP standards for sequencing
80 ; known to work with wave7optics FTTH LMGs
82 ;accountcode = 1000 ; record this in cdr as account identification for billing
83 ;amaflags = billing ; record this in cdr as flagged for 'billing',
84 ; 'documentation', or 'omit'
87 ;wcardep = aaln/* ; enables wildcard endpoint and sets it to 'aaln/*'
88 ; another common format is '*'
89 ;callerid = "Duane Cox" <123> ; now lets setup line 1 using per endpoint configuration...
96 ;line => aaln/1 ; now lets save this config to line1 aka aaln/1
97 ;callerid = "Duane Cox" <456> ; now lets setup line 2
100 ;cancallforward = yes
104 ;line => aaln/2 ; now lets save this config to line2 aka aaln/2