2 ; MGCP Configuration for Asterisk
8 ; See qos.tex or Quality of Service section of asterisk.pdf for a description of these parameters.
9 ;tos=cs3 ; Sets TOS for signaling packets.
10 ;tos_audio=ef ; Sets TOS for RTP audio packets.
11 ;cos=3 ; Sets 802.1p priority for signaling packets.
12 ;cos_audio=5 ; Sets 802.1p priority for RTP audio packets.
14 ;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
15 ; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of a
16 ; MGCP channel. Defaults to "no". An enabled jitterbuffer will
17 ; be used only if the sending side can create and the receiving
18 ; side can not accept jitter. The MGCP channel can accept jitter,
19 ; thus an enabled jitterbuffer on the receive MGCP side will only
20 ; be used if the sending side can create jitter and jbforce is
23 ; jbforce = no ; Forces the use of a jitterbuffer on the receive side of a MGCP
24 ; channel. Defaults to "no".
26 ; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
28 ; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
29 ; resynchronized. Useful to improve the quality of the voice, with
30 ; big jumps in/broken timestamps, usually sent from exotic devices
31 ; and programs. Defaults to 1000.
33 ; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of a MGCP
34 ; channel. Two implementations are currently available - "fixed"
35 ; (with size always equals to jbmax-size) and "adaptive" (with
36 ; variable size, actually the new jb of IAX2). Defaults to fixed.
38 ; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
39 ;-----------------------------------------------------------------------------------
48 ;; The MGCP channel supports the following service codes:
50 ;; *67 - Calling Number Delivery Blocking
51 ;; *70 - Cancel Call Waiting
52 ;; *72 - Call Forwarding Activation
53 ;; *73 - Call Forwarding Deactivation
54 ;; *78 - Do Not Disturb Activation
55 ;; *79 - Do Not Disturb Deactivation
58 ; known to work with Swissvoice IP10s
62 ;callerid = "John Doe" <123>
63 ;callgroup=0 ; in the range from 0 to 63
64 ;pickupgroup=0 ; in the range from 0 to 63
67 ;transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to transfer
68 ;callwaiting=yes ; this might be a cause of trouble for ip10s
75 ; Supporting the DPH100M requires defining DLINK_BUGGY_FIRMWARE in
76 ; chan_mgcp.c in addition to enabling the slowsequence mode due to
77 ; bugs in the D-Link firmware
81 ;dtmfmode=none ; DTMF Mode can be 'none', 'rfc2833', or 'inband' or
82 ; 'hybrid' which starts in none and moves to inband. Default is none.
83 ;slowsequence=yes ; The DPH100M does not follow MGCP standards for sequencing
86 ; known to work with wave7optics FTTH LMGs
88 ;accountcode = 1000 ; record this in cdr as account identification for billing
89 ;amaflags = billing ; record this in cdr as flagged for 'billing',
90 ; 'documentation', or 'omit'
93 ;wcardep = aaln/* ; enables wildcard endpoint and sets it to 'aaln/*'
94 ; another common format is '*'
95 ;callerid = "Duane Cox" <123> ; now lets setup line 1 using per endpoint configuration...
102 ;line => aaln/1 ; now lets save this config to line1 aka aaln/1
103 ;callerid = "Duane Cox" <456> ; now lets setup line 2
106 ;cancallforward = yes
110 ;line => aaln/2 ; now lets save this config to line2 aka aaln/2