Makefile

   1 #
   2 # Asterisk -- A telephony toolkit for Linux.
   3 #
   4 # Top level Makefile
   5 #
   6 # Copyright (C) 1999-2006, Digium, Inc.
   7 #
   8 # Mark Spencer <markster@digium.com>
   9 #
  10 # This program is free software, distributed under the terms of
  11 # the GNU General Public License
  12 #
  13
  14 # All Makefiles use the following variables:
  15 #
  16 # ASTCFLAGS - compiler options
  17 # ASTLDFLAGS - linker flags (not libraries)
  18 # LIBS - additional libraries, at top-level for all links,
  19 #      on a single object just for that object
  20 # SOLINK - linker flags used only for creating shared objects (.so files),
  21 #      used for all .so links
  22 #
  23 # Initial values for ASTCFLAGS and ASTLDFLAGS can be specified in the
  24 # environment when running make, as follows:
  25 #
  26 #       $ ASTCFLAGS="-Werror" make ...
  27 #
  28 # note that this is different from
  29 #
  30 #       $ make ASTCFLAGS="-Werror" ...
  31 #
  32 # If you need to pass compiler/linker flags as 'make' variables, please use
  33 #
  34 #       $ make COPTS="..." LDOPTS="..." ...
  35 #
  36 #
  37 # You can add the path of local module subdirs from the command line with
  38 #   make LOCAL_MOD_SUBDIRS= ....
  39
  40 export ASTTOPDIR                # Top level dir, used in subdirs' Makefiles
  41 export ASTERISKVERSION
  42 export ASTERISKVERSIONNUM
  43
  44 #--- values used for default paths
  45
  46 # DESTDIR is the staging (or final) directory where files are copied
  47 # during the install process. Define it before 'export', otherwise
  48 # export will set it to the empty string making ?= fail.
  49 # WARNING: do not put spaces or comments after the value.
  50 DESTDIR?=$(INSTALL_PATH)
  51 export DESTDIR
  52
  53 export INSTALL_PATH     # Additional prefix for the following paths
  54 export ASTETCDIR                # Path for config files
  55 export ASTVARRUNDIR
  56 export MODULES_DIR
  57 export ASTSPOOLDIR
  58 export ASTVARLIBDIR
  59 export ASTDATADIR
  60 export ASTDBDIR
  61 export ASTLOGDIR
  62 export ASTLIBDIR
  63 export ASTMANDIR
  64 export ASTHEADERDIR
  65 export ASTBINDIR
  66 export ASTSBINDIR
  67 export AGI_DIR
  68 export ASTCONFPATH
  69
  70 export OSARCH                   # Operating system
  71 export PROC                     # Processor type
  72
  73 export NOISY_BUILD              # Used in Makefile.rules
  74 export MENUSELECT_CFLAGS        # Options selected in menuselect.
  75 export AST_DEVMODE              # Set to "yes" for additional compiler
  76                                 # and runtime checks
  77
  78 export SOLINK                   # linker flags for shared objects
  79 export STATIC_BUILD             # Additional cflags, set to -static
  80                                 # for static builds. Probably
  81                                 # should go directly to ASTLDFLAGS
  82
  83 #--- paths to various commands
  84 export CC
  85 export CXX
  86 export AR
  87 export RANLIB
  88 export HOST_CC
  89 export INSTALL
  90 export STRIP
  91 export DOWNLOAD
  92 export AWK
  93 export GREP
  94 export ID
  95
  96 # even though we could use '-include makeopts' here, use a wildcard
  97 # lookup anyway, so that make won't try to build makeopts if it doesn't
  98 # exist (other rules will force it to be built if needed)
  99 ifneq ($(wildcard makeopts),)
 100   include makeopts
 101 endif
 102
 103 # Some build systems, such as the one in openwrt, like to pass custom target
 104 # CFLAGS and LDFLAGS in the COPTS and LDOPTS variables.
 105 ASTCFLAGS+=$(COPTS)
 106 ASTLDFLAGS+=$(LDOPTS)
 107
 108 #Uncomment this to see all build commands instead of 'quiet' output
 109 #NOISY_BUILD=yes
 110
 111 empty:=
 112 space:=$(empty) $(empty)
 113 ASTTOPDIR:=$(subst $(space),\$(space),$(CURDIR))
 114
 115 # Overwite config files on "make samples"
 116 OVERWRITE=y
 117
 118 # Include debug and macro symbols in the executables (-g) and profiling info (-pg)
 119 DEBUG=-g3
 120
 121
 122 # Define standard directories for various platforms
 123 # These apply if they are not redefined in asterisk.conf
 124 ifeq ($(OSARCH),SunOS)
 125   ASTETCDIR=/var/etc/asterisk
 126   ASTLIBDIR=/opt/asterisk/lib
 127   ASTVARLIBDIR=/var/opt/asterisk
 128   ASTDBDIR=$(ASTVARLIBDIR)
 129   ASTKEYDIR=$(ASTVARLIBDIR)
 130   ASTSPOOLDIR=/var/spool/asterisk
 131   ASTLOGDIR=/var/log/asterisk
 132   ASTHEADERDIR=/opt/asterisk/include
 133   ASTBINDIR=/opt/asterisk/bin
 134   ASTSBINDIR=/opt/asterisk/sbin
 135   ASTVARRUNDIR=/var/run/asterisk
 136   ASTMANDIR=/opt/asterisk/man
 137 else
 138   ASTETCDIR=$(sysconfdir)/asterisk
 139   ASTLIBDIR=$(libdir)/asterisk
 140   ASTHEADERDIR=$(includedir)/asterisk
 141   ASTBINDIR=$(bindir)
 142   ASTSBINDIR=$(sbindir)
 143   ASTSPOOLDIR=$(localstatedir)/spool/asterisk
 144   ASTLOGDIR=$(localstatedir)/log/asterisk
 145   ASTVARRUNDIR=$(localstatedir)/run
 146   ASTMANDIR=$(mandir)
 147 ifneq ($(findstring BSD,$(OSARCH)),)
 148   ASTVARLIBDIR=$(prefix)/share/asterisk
 149   ASTVARRUNDIR=$(localstatedir)/run/asterisk
 150   ASTDBDIR=$(localstatedir)/db/asterisk
 151 else
 152   ASTVARLIBDIR=$(localstatedir)/lib/asterisk
 153   ASTDBDIR=$(ASTVARLIBDIR)
 154 endif
 155   ASTKEYDIR=$(ASTVARLIBDIR)
 156 endif
 157 ifeq ($(ASTDATADIR),)
 158   ASTDATADIR:=$(ASTVARLIBDIR)
 159 endif
 160
 161 # Asterisk.conf is located in ASTETCDIR or by using the -C flag
 162 # when starting Asterisk
 163 ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
 164 MODULES_DIR=$(ASTLIBDIR)/modules
 165 AGI_DIR=$(ASTDATADIR)/agi-bin
 166
 167 # If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
 168 HTTP_DOCSDIR=/var/www/html
 169 # Determine by a grep 'ScriptAlias' of your Apache httpd.conf file
 170 HTTP_CGIDIR=/var/www/cgi-bin
 171
 172 # Uncomment this to use the older DSP routines
 173 #ASTCFLAGS+=-DOLD_DSP_ROUTINES
 174
 175 # If the file .asterisk.makeopts is present in your home directory, you can
 176 # include all of your favorite menuselect options so that every time you download
 177 # a new version of Asterisk, you don't have to run menuselect to set them.
 178 # The file /etc/asterisk.makeopts will also be included but can be overridden
 179 # by the file in your home directory.
 180
 181 GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
 182 USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
 183
 184 MOD_SUBDIR_CFLAGS=-I$(ASTTOPDIR)/include
 185 OTHER_SUBDIR_CFLAGS=-I$(ASTTOPDIR)/include
 186
 187 # Create OPTIONS variable, but probably we can assign directly to ASTCFLAGS
 188 OPTIONS=
 189
 190 ifeq ($(OSARCH),linux-gnu)
 191   ifeq ($(PROC),x86_64)
 192     # You must have GCC 3.4 to use k8, otherwise use athlon
 193     PROC=k8
 194     #PROC=athlon
 195   endif
 196
 197   ifeq ($(PROC),sparc64)
 198     #The problem with sparc is the best stuff is in newer versions of gcc (post 3.0) only.
 199     #This works for even old (2.96) versions of gcc and provides a small boost either way.
 200     #A ultrasparc cpu is really v9 but the stock debian stable 3.0 gcc doesn't support it.
 201     #So we go lowest common available by gcc and go a step down, still a step up from
 202     #the default as we now have a better instruction set to work with. - Belgarath
 203     PROC=ultrasparc
 204     OPTIONS+=$(shell if $(CC) -mtune=$(PROC) -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mtune=$(PROC)"; fi)
 205     OPTIONS+=$(shell if $(CC) -mcpu=v8 -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-mcpu=v8"; fi)
 206     OPTIONS+=-fomit-frame-pointer
 207   endif
 208
 209   ifeq ($(PROC),arm)
 210     # The Cirrus logic is the only heavily shipping arm processor with a real floating point unit
 211     ifeq ($(SUB_PROC),maverick)
 212       OPTIONS+=-fsigned-char -mcpu=ep9312
 213     else
 214       ifeq ($(SUB_PROC),xscale)
 215         OPTIONS+=-fsigned-char -mcpu=xscale
 216       else
 217         OPTIONS+=-fsigned-char
 218       endif
 219     endif
 220   endif
 221 endif
 222
 223 ifeq ($(findstring -save-temps,$(ASTCFLAGS)),)
 224 ASTCFLAGS+=-pipe
 225 endif
 226
 227 ASTCFLAGS+=-Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations $(DEBUG)
 228
 229 ASTCFLAGS+=-include $(ASTTOPDIR)/include/asterisk/autoconfig.h
 230
 231 ifeq ($(AST_DEVMODE),yes)
 232   ASTCFLAGS+=-Werror -Wunused -Wundef $(AST_DECLARATION_AFTER_STATEMENT) -Wmissing-format-attribute -Wformat-security #-Wformat=2
 233 endif
 234
 235 ifneq ($(findstring BSD,$(OSARCH)),)
 236   ASTCFLAGS+=-I/usr/local/include
 237   ASTLDFLAGS+=-L/usr/local/lib
 238 endif
 239
 240 ifneq ($(PROC),ultrasparc)
 241   ASTCFLAGS+=$(shell if $(CC) -march=$(PROC) -S -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-march=$(PROC)"; fi)
 242 endif
 243
 244 ifeq ($(PROC),ppc)
 245   ASTCFLAGS+=-fsigned-char
 246 endif
 247
 248 ifeq ($(OSARCH),FreeBSD)
 249   # -V is understood by BSD Make, not by GNU make.
 250   BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
 251   ASTCFLAGS+=$(shell if test $(BSDVERSION) -lt 500016 ; then echo "-D_THREAD_SAFE"; fi)
 252 endif
 253
 254 ifeq ($(OSARCH),NetBSD)
 255   ASTCFLAGS+=-pthread -I/usr/pkg/include
 256 endif
 257
 258 ifeq ($(OSARCH),OpenBSD)
 259   ASTCFLAGS+=-pthread
 260 endif
 261
 262 ifeq ($(OSARCH),SunOS)
 263   ASTCFLAGS+=-Wcast-align -DSOLARIS -I../include/solaris-compat -I/opt/ssl/include -I/usr/local/ssl/include -D_XPG4_2
 264 endif
 265
 266 ASTERISKVERSION:=$(shell GREP=$(GREP) AWK=$(AWK) build_tools/make_version .)
 267
 268 ifneq ($(wildcard .version),)
 269   ASTERISKVERSIONNUM:=$(shell $(AWK) -F. '{printf "%01d%02d%02d", $$1, $$2, $$3}' .version)
 270   RPMVERSION:=$(shell sed 's/[-\/:]/_/g' .version)
 271 else
 272   RPMVERSION=unknown
 273 endif
 274
 275 ifneq ($(wildcard .svn),)
 276   ASTERISKVERSIONNUM:=999999
 277 endif
 278
 279 # XXX MALLOC_DEBUG is probably unused, Makefile.moddir_rules adds the
 280 #       value directly to ASTCFLAGS
 281 ASTCFLAGS+=$(MALLOC_DEBUG)$(OPTIONS)
 282
 283 MOD_SUBDIRS:=channels pbx apps codecs formats cdr funcs tests main res $(LOCAL_MOD_SUBDIRS)
 284 OTHER_SUBDIRS:=utils agi
 285 SUBDIRS:=$(OTHER_SUBDIRS) $(MOD_SUBDIRS)
 286 SUBDIRS_INSTALL:=$(SUBDIRS:%=%-install)
 287 SUBDIRS_CLEAN:=$(SUBDIRS:%=%-clean)
 288 SUBDIRS_DIST_CLEAN:=$(SUBDIRS:%=%-dist-clean)
 289 SUBDIRS_UNINSTALL:=$(SUBDIRS:%=%-uninstall)
 290 MOD_SUBDIRS_EMBED_LDSCRIPT:=$(MOD_SUBDIRS:%=%-embed-ldscript)
 291 MOD_SUBDIRS_EMBED_LDFLAGS:=$(MOD_SUBDIRS:%=%-embed-ldflags)
 292 MOD_SUBDIRS_EMBED_LIBS:=$(MOD_SUBDIRS:%=%-embed-libs)
 293 MOD_SUBDIRS_MENUSELECT_TREE:=$(MOD_SUBDIRS:%=%-menuselect-tree)
 294
 295 ifneq ($(findstring darwin,$(OSARCH)),)
 296   ASTCFLAGS+=-D__Darwin__
 297   SOLINK=-dynamic -bundle -undefined suppress -force_flat_namespace
 298 else
 299 # These are used for all but Darwin
 300   SOLINK=-shared -Xlinker -x
 301   ifneq ($(findstring BSD,$(OSARCH)),)
 302     LDFLAGS+=-L/usr/local/lib
 303   endif
 304 endif
 305
 306 ifeq ($(OSARCH),SunOS)
 307   SOLINK=-shared -fpic -L/usr/local/ssl/lib -lrt
 308 endif
 309
 310 # comment to print directories during submakes
 311 #PRINT_DIR=yes
 312
 313 SILENTMAKE:=$(MAKE) --quiet --no-print-directory
 314 ifneq ($(PRINT_DIR)$(NOISY_BUILD),)
 315 SUBMAKE:=$(MAKE) --quiet
 316 else
 317 SUBMAKE:=$(MAKE) --quiet --no-print-directory
 318 endif
 319
 320 # This is used when generating the doxygen documentation
 321 ifneq ($(DOT),:)
 322   HAVEDOT=yes
 323 else
 324   HAVEDOT=no
 325 endif
 326
 327 # $(MAKE) is printed in several places, and we want it to be a
 328 # fixed size string. Define a variable whose name has also the
 329 # same size, so we can easily align text.
 330 ifeq ($(MAKE), gmake)
 331         mK="gmake"
 332 else
 333         mK=" make"
 334 endif
 335
 336 all: _all
 337         @echo " +--------- Asterisk Build Complete ---------+"
 338         @echo " + Asterisk has successfully been built, and +"
 339         @echo " + can be installed by running:              +"
 340         @echo " +                                           +"
 341         @echo " +               $(mK) install               +"
 342         @echo " +-------------------------------------------+"
 343
 344 _all: cleantest makeopts $(SUBDIRS)
 345
 346 makeopts: configure
 347         @echo "****"
 348         @echo "**** The configure script must be executed before running '$(MAKE)'."
 349         @echo "****               Please run \"./configure\"."
 350         @echo "****"
 351         @exit 1
 352
 353 menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts
 354         menuselect/menuselect --check-deps menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
 355
 356 $(MOD_SUBDIRS_EMBED_LDSCRIPT):
 357         @echo "EMBED_LDSCRIPTS+="`$(SILENTMAKE) -C $(@:-embed-ldscript=) SUBDIR=$(@:-embed-ldscript=) __embed_ldscript` >> makeopts.embed_rules
 358
 359 $(MOD_SUBDIRS_EMBED_LDFLAGS):
 360         @echo "EMBED_LDFLAGS+="`$(SILENTMAKE) -C $(@:-embed-ldflags=) SUBDIR=$(@:-embed-ldflags=) __embed_ldflags` >> makeopts.embed_rules
 361
 362 $(MOD_SUBDIRS_EMBED_LIBS):
 363         @echo "EMBED_LIBS+="`$(SILENTMAKE) -C $(@:-embed-libs=) SUBDIR=$(@:-embed-libs=) __embed_libs` >> makeopts.embed_rules
 364
 365 $(MOD_SUBDIRS_MENUSELECT_TREE):
 366         @$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) moduleinfo
 367         @$(SUBMAKE) -C $(@:-menuselect-tree=) SUBDIR=$(@:-menuselect-tree=) makeopts
 368
 369 makeopts.embed_rules: menuselect.makeopts
 370         @echo "Generating embedded module rules ..."
 371         @rm -f $@
 372         @$(MAKE) $(PRINT_DIR) $(MOD_SUBDIRS_EMBED_LDSCRIPT)
 373         @$(MAKE) $(PRINT_DIR) $(MOD_SUBDIRS_EMBED_LDFLAGS)
 374         @$(MAKE) $(PRINT_DIR) $(MOD_SUBDIRS_EMBED_LIBS)
 375
 376 $(SUBDIRS): main/version.c include/asterisk/version.h include/asterisk/build.h include/asterisk/buildopts.h defaults.h makeopts.embed_rules
 377
 378 ifeq ($(findstring $(OSARCH), mingw32 cygwin ),)
 379     # Non-windows:
 380     # ensure that all module subdirectories are processed before 'main' during
 381     # a parallel build, since if there are modules selected to be embedded the
 382     # directories containing them must be completed before the main Asterisk
 383     # binary can be built
 384 main: $(filter-out main,$(MOD_SUBDIRS))
 385 else
 386     # Windows: we need to build main (i.e. the asterisk dll) first,
 387     # followed by res, followed by the other directories, because
 388     # dll symbols must be resolved during linking and not at runtime.
 389 D1:= $(filter-out main,$(MOD_SUBDIRS))
 390 D1:= $(filter-out res,$(D1))
 391
 392 $(D1): res
 393 res:    main
 394 endif
 395
 396 $(MOD_SUBDIRS):
 397         @ASTCFLAGS="$(MOD_SUBDIR_CFLAGS) $(ASTCFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(MAKE) $(PRINT_DIR) --no-builtin-rules -C $@ SUBDIR=$@ all
 398
 399 $(OTHER_SUBDIRS):
 400         @ASTCFLAGS="$(OTHER_SUBDIR_CFLAGS) $(ASTCFLAGS)" ASTLDFLAGS="$(ASTLDFLAGS)" $(MAKE) $(PRINT_DIR) --no-builtin-rules -C $@ SUBDIR=$@ all
 401
 402 defaults.h: makeopts
 403         @build_tools/make_defaults_h > $@.tmp
 404         @cmp -s $@.tmp $@ || mv $@.tmp $@
 405         @rm -f $@.tmp
 406
 407 main/version.c:
 408         @build_tools/make_version_c > $@.tmp
 409         @cmp -s $@.tmp $@ || mv $@.tmp $@
 410         @rm -f $@.tmp
 411
 412 include/asterisk/version.h:
 413         @build_tools/make_version_h > $@.tmp
 414         @cmp -s $@.tmp $@ || mv $@.tmp $@
 415         @rm -f $@.tmp
 416
 417 include/asterisk/buildopts.h: menuselect.makeopts
 418         @build_tools/make_buildopts_h > $@.tmp
 419         @cmp -s $@.tmp $@ || mv $@.tmp $@
 420         @rm -f $@.tmp
 421
 422 include/asterisk/build.h:
 423         @build_tools/make_build_h > $@.tmp
 424         @cmp -s $@.tmp $@ || mv $@.tmp $@
 425         @rm -f $@.tmp
 426
 427 $(SUBDIRS_CLEAN):
 428         @$(MAKE) $(PRINT_DIR) -C $(@:-clean=) clean
 429
 430 $(SUBDIRS_DIST_CLEAN):
 431         @$(MAKE) $(PRINT_DIR) -C $(@:-dist-clean=) dist-clean
 432
 433 clean: $(SUBDIRS_CLEAN)
 434         rm -f defaults.h
 435         rm -f include/asterisk/build.h
 436         rm -f main/version.c
 437         rm -f include/asterisk/version.h
 438         @$(MAKE) -C menuselect clean
 439         cp -f .cleancount .lastclean
 440
 441 dist-clean: distclean
 442
 443 distclean: $(SUBDIRS_DIST_CLEAN) clean
 444         @$(MAKE) -C menuselect dist-clean
 445         @$(MAKE) -C sounds dist-clean
 446         rm -f menuselect.makeopts makeopts menuselect-tree menuselect.makedeps
 447         rm -f makeopts.embed_rules
 448         rm -f config.log config.status config.cache
 449         rm -rf autom4te.cache
 450         rm -f include/asterisk/autoconfig.h
 451         rm -f include/asterisk/buildopts.h
 452         rm -rf doc/api
 453         rm -f build_tools/menuselect-deps
 454
 455 datafiles: _all
 456         if [ x`$(ID) -un` = xroot ]; then CFLAGS="$(ASTCFLAGS)" sh build_tools/mkpkgconfig $(DESTDIR)/usr/lib/pkgconfig; fi
 457 # Should static HTTP be installed during make samples or even with its own target ala
 458 # webvoicemail?  There are portions here that *could* be customized but might also be
 459 # improved a lot.  I'll put it here for now.
 460         mkdir -p $(DESTDIR)$(ASTDATADIR)/static-http
 461         for x in static-http/*; do \
 462                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTDATADIR)/static-http ; \
 463         done
 464         if [ -d doc/tex/asterisk ] ; then \
 465                         mkdir -p $(DESTDIR)$(ASTDATADIR)/static-http/docs ; \
 466                         for n in doc/tex/asterisk/* ; do \
 467                                 $(INSTALL) -m 644 $$n $(DESTDIR)$(ASTDATADIR)/static-http/docs ; \
 468                         done \
 469         fi
 470         mkdir -p $(DESTDIR)$(ASTDATADIR)/images
 471         for x in images/*.jpg; do \
 472                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTDATADIR)/images ; \
 473         done
 474         mkdir -p $(DESTDIR)$(AGI_DIR)
 475         $(MAKE) -C sounds install
 476
 477 update:
 478         @if [ -d .svn ]; then \
 479                 echo "Updating from Subversion..." ; \
 480                 fromrev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
 481                 svn update | tee update.out; \
 482                 torev="`svn info | $(AWK) '/Revision: / {print $$2}'`"; \
 483                 echo "`date`  Updated from revision $${fromrev} to $${torev}." >> update.log; \
 484                 rm -f .version; \
 485                 if [ `grep -c ^C update.out` -gt 0 ]; then \
 486                         echo ; echo "The following files have conflicts:" ; \
 487                         grep ^C update.out | cut -b4- ; \
 488                 fi ; \
 489                 rm -f update.out; \
 490         else \
 491                 echo "Not under version control";  \
 492         fi
 493
 494 NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
 495 OLDHEADERS=$(filter-out $(NEWHEADERS),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
 496
 497 installdirs:
 498         mkdir -p $(DESTDIR)$(MODULES_DIR)
 499         mkdir -p $(DESTDIR)$(ASTSBINDIR)
 500         mkdir -p $(DESTDIR)$(ASTETCDIR)
 501         mkdir -p $(DESTDIR)$(ASTBINDIR)
 502         mkdir -p $(DESTDIR)$(ASTVARRUNDIR)
 503         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/voicemail
 504         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/dictate
 505         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/system
 506         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/tmp
 507         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/meetme
 508         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/monitor
 509
 510 bininstall: _all installdirs $(SUBDIRS_INSTALL)
 511         $(INSTALL) -m 755 main/asterisk $(DESTDIR)$(ASTSBINDIR)/
 512         $(LN) -sf asterisk $(DESTDIR)$(ASTSBINDIR)/rasterisk
 513         $(INSTALL) -m 755 contrib/scripts/astgenkey $(DESTDIR)$(ASTSBINDIR)/
 514         $(INSTALL) -m 755 contrib/scripts/autosupport $(DESTDIR)$(ASTSBINDIR)/
 515         if [ ! -f $(DESTDIR)$(ASTSBINDIR)/safe_asterisk ]; then \
 516                 cat contrib/scripts/safe_asterisk | sed 's|__ASTERISK_SBIN_DIR__|$(ASTSBINDIR)|;s|__ASTERISK_VARRUN_DIR__|$(ASTVARRUNDIR)|;' > $(DESTDIR)$(ASTSBINDIR)/safe_asterisk ;\
 517                 chmod 755 $(DESTDIR)$(ASTSBINDIR)/safe_asterisk;\
 518         fi
 519         $(INSTALL) -d $(DESTDIR)$(ASTHEADERDIR)
 520         $(INSTALL) -m 644 include/asterisk.h $(DESTDIR)$(includedir)
 521         $(INSTALL) -m 644 include/asterisk/*.h $(DESTDIR)$(ASTHEADERDIR)
 522         if [ -n "$(OLDHEADERS)" ]; then \
 523                 rm -f $(addprefix $(DESTDIR)$(ASTHEADERDIR)/,$(OLDHEADERS)) ;\
 524         fi
 525         mkdir -p $(DESTDIR)$(ASTLOGDIR)/cdr-csv
 526         mkdir -p $(DESTDIR)$(ASTLOGDIR)/cdr-custom
 527         mkdir -p $(DESTDIR)$(ASTDATADIR)/keys
 528         mkdir -p $(DESTDIR)$(ASTDATADIR)/firmware
 529         mkdir -p $(DESTDIR)$(ASTDATADIR)/firmware/iax
 530         mkdir -p $(DESTDIR)$(ASTMANDIR)/man8
 531         $(INSTALL) -m 644 keys/iaxtel.pub $(DESTDIR)$(ASTDATADIR)/keys
 532         $(INSTALL) -m 644 keys/freeworlddialup.pub $(DESTDIR)$(ASTDATADIR)/keys
 533         $(INSTALL) -m 644 doc/asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
 534         $(INSTALL) -m 644 contrib/scripts/astgenkey.8 $(DESTDIR)$(ASTMANDIR)/man8
 535         $(INSTALL) -m 644 contrib/scripts/autosupport.8 $(DESTDIR)$(ASTMANDIR)/man8
 536         $(INSTALL) -m 644 contrib/scripts/safe_asterisk.8 $(DESTDIR)$(ASTMANDIR)/man8
 537         if [ -f contrib/firmware/iax/iaxy.bin ] ; then \
 538                 $(INSTALL) -m 644 contrib/firmware/iax/iaxy.bin $(DESTDIR)$(ASTDATADIR)/firmware/iax/iaxy.bin; \
 539         fi
 540
 541 $(SUBDIRS_INSTALL):
 542         @DESTDIR="$(DESTDIR)" ASTSBINDIR="$(ASTSBINDIR)" $(MAKE) --quiet $(PRINT_DIR) -C $(@:-install=) install
 543
 544 NEWMODS:=$(foreach d,$(MOD_SUBDIRS),$(notdir $(wildcard $(d)/*.so)))
 545 OLDMODS=$(filter-out $(NEWMODS),$(notdir $(wildcard $(DESTDIR)$(MODULES_DIR)/*.so)))
 546
 547 oldmodcheck:
 548         @if [ -n "$(OLDMODS)" ]; then \
 549                 echo " WARNING WARNING WARNING" ;\
 550                 echo "" ;\
 551                 echo " Your Asterisk modules directory, located at" ;\
 552                 echo " $(DESTDIR)$(MODULES_DIR)" ;\
 553                 echo " contains modules that were not installed by this " ;\
 554                 echo " version of Asterisk. Please ensure that these" ;\
 555                 echo " modules are compatible with this version before" ;\
 556                 echo " attempting to run Asterisk." ;\
 557                 echo "" ;\
 558                 for f in $(OLDMODS); do \
 559                         echo "    $$f" ;\
 560                 done ;\
 561                 echo "" ;\
 562                 echo " WARNING WARNING WARNING" ;\
 563         fi
 564
 565 badshell:
 566 ifneq ($(findstring ~,$(DESTDIR)),)
 567         @echo "Your shell doesn't do ~ expansion when expected (specifically, when doing \"make install DESTDIR=~/path\")."
 568         @echo "Try replacing ~ with \$$HOME, as in \"make install DESTDIR=\$$HOME/path\"."
 569         @exit 1
 570 endif
 571
 572 install: badshell datafiles bininstall
 573         @if [ -x /usr/sbin/asterisk-post-install ]; then \
 574                 /usr/sbin/asterisk-post-install $(DESTDIR) . ; \
 575         fi
 576         @echo " +---- Asterisk Installation Complete -------+"
 577         @echo " +                                           +"
 578         @echo " +    YOU MUST READ THE SECURITY DOCUMENT    +"
 579         @echo " +                                           +"
 580         @echo " + Asterisk has successfully been installed. +"
 581         @echo " + If you would like to install the sample   +"
 582         @echo " + configuration files (overwriting any      +"
 583         @echo " + existing config files), run:              +"
 584         @echo " +                                           +"
 585         @echo " +               $(mK) samples               +"
 586         @echo " +                                           +"
 587         @echo " +-----------------  or ---------------------+"
 588         @echo " +                                           +"
 589         @echo " + You can go ahead and install the asterisk +"
 590         @echo " + program documentation now or later run:   +"
 591         @echo " +                                           +"
 592         @echo " +              $(mK) progdocs               +"
 593         @echo " +                                           +"
 594         @echo " + **Note** This requires that you have      +"
 595         @echo " + doxygen installed on your local system    +"
 596         @echo " +-------------------------------------------+"
 597         @$(MAKE) -s oldmodcheck
 598
 599 upgrade: bininstall
 600
 601 # XXX why *.adsi is installed first ?
 602 adsi:
 603         @echo Installing adsi config files...
 604         @mkdir -p $(DESTDIR)$(ASTETCDIR)
 605         @for x in configs/*.adsi; do \
 606                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
 607                 if [ -f $${dst} ] ; then \
 608                         echo "Overwriting $$x" ; \
 609                 else \
 610                         echo "Installing $$x" ; \
 611                 fi ; \
 612                 $(INSTALL) -m 644 $$x $(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x` ; \
 613         done
 614
 615 samples: adsi
 616         @echo Installing other config files...
 617         @mkdir -p $(DESTDIR)$(ASTETCDIR)
 618         @for x in configs/*.sample; do \
 619                 dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x .sample`" ;        \
 620                 if [ -f $${dst} ]; then \
 621                         if [ "$(OVERWRITE)" = "y" ]; then \
 622                                 if cmp -s $${dst} $$x ; then \
 623                                         echo "Config file $$x is unchanged"; \
 624                                         continue; \
 625                                 fi ; \
 626                                 mv -f $${dst} $${dst}.old ; \
 627                         else \
 628                                 echo "Skipping config file $$x"; \
 629                                 continue; \
 630                         fi ;\
 631                 fi ; \
 632                 echo "Installing file $$x"; \
 633                 $(INSTALL) -m 644 $$x $${dst} ;\
 634         done
 635         @if [ "$(OVERWRITE)" = "y" ] || [ ! -f $(DESTDIR)$(ASTCONFPATH) ]; then \
 636                 echo "Creating asterisk.conf"; \
 637                 ( \
 638                 echo "[directories](!) ; remove the (!) to enable this" ; \
 639                 echo "astetcdir => $(ASTETCDIR)" ; \
 640                 echo "astmoddir => $(MODULES_DIR)" ; \
 641                 echo "astvarlibdir => $(ASTVARLIBDIR)" ; \
 642                 echo "astdbdir => $(ASTDBDIR)" ; \
 643                 echo "astkeydir => $(ASTKEYDIR)" ; \
 644                 echo "astdatadir => $(ASTDATADIR)" ; \
 645                 echo "astagidir => $(AGI_DIR)" ; \
 646                 echo "astspooldir => $(ASTSPOOLDIR)" ; \
 647                 echo "astrundir => $(ASTVARRUNDIR)" ; \
 648                 echo "astlogdir => $(ASTLOGDIR)" ; \
 649                 echo "" ; \
 650                 echo ";[options]" ; \
 651                 echo ";verbose = 3" ; \
 652                 echo ";debug = 3" ; \
 653                 echo ";alwaysfork = yes ; same as -F at startup" ; \
 654                 echo ";nofork = yes ; same as -f at startup" ; \
 655                 echo ";quiet = yes ; same as -q at startup" ; \
 656                 echo ";timestamp = yes ; same as -T at startup" ; \
 657                 echo ";execincludes = yes ; support #exec in config files" ; \
 658                 echo ";console = yes ; Run as console (same as -c at startup)" ; \
 659                 echo ";highpriority = yes ; Run realtime priority (same as -p at startup)" ; \
 660                 echo ";initcrypto = yes ; Initialize crypto keys (same as -i at startup)" ; \
 661                 echo ";nocolor = yes ; Disable console colors" ; \
 662                 echo ";dontwarn = yes ; Disable some warnings" ; \
 663                 echo ";dumpcore = yes ; Dump core on crash (same as -g at startup)" ; \
 664                 echo ";languageprefix = yes ; Use the new sound prefix path syntax" ; \
 665                 echo ";internal_timing = yes" ; \
 666                 echo ";systemname = my_system_name ; prefix uniqueid with a system name for global uniqueness issues" ; \
 667                 echo ";autosystemname = yes ; automatically set systemname to hostname - uses 'localhost' on failure, or systemname if set" ; \
 668                 echo ";maxcalls = 10 ; Maximum amount of calls allowed" ; \
 669                 echo ";maxload = 0.9 ; Asterisk stops accepting new calls if the load average exceed this limit" ; \
 670                 echo ";maxfiles = 1000 ; Maximum amount of openfiles" ; \
 671                 echo ";minmemfree = 1 ; in MBs, Asterisk stops accepting new calls if the amount of free memory falls below this watermark" ; \
 672                 echo ";cache_record_files = yes ; Cache recorded sound files to another directory during recording" ; \
 673                 echo ";record_cache_dir = /tmp ; Specify cache directory (used in cnjunction with cache_record_files)" ; \
 674                 echo ";transmit_silence_during_record = yes ; Transmit SLINEAR silence while a channel is being recorded" ; \
 675                 echo ";transmit_silence = yes ; Transmit SLINEAR silence while a channel is being recorded or DTMF is being generated" ; \
 676                 echo ";transcode_via_sln = yes ; Build transcode paths via SLINEAR, instead of directly" ; \
 677                 echo ";runuser = asterisk ; The user to run as" ; \
 678                 echo ";rungroup = asterisk ; The group to run as" ; \
 679                 echo "dahdichanname = yes ; Set channel name as DAHDI" ; \
 680                 echo "" ; \
 681                 echo "; Changing the following lines may compromise your security." ; \
 682                 echo ";[files]" ; \
 683                 echo ";astctlpermissions = 0660" ; \
 684                 echo ";astctlowner = root" ; \
 685                 echo ";astctlgroup = apache" ; \
 686                 echo ";astctl = asterisk.ctl" ; \
 687                 echo "" ; \
 688                 echo "[compat]" ; \
 689                 echo "pbx_realtime=1.6" ; \
 690                 echo "res_agi=1.6" ; \
 691                 echo "app_set=1.6" ; \
 692                 ) > $(DESTDIR)$(ASTCONFPATH) ; \
 693         else \
 694                 echo "Skipping asterisk.conf creation"; \
 695         fi
 696         mkdir -p $(DESTDIR)$(ASTSPOOLDIR)/voicemail/default/1234/INBOX
 697         build_tools/make_sample_voicemail $(DESTDIR)/$(ASTDATADIR) $(DESTDIR)/$(ASTSPOOLDIR)
 698         @mkdir -p $(DESTDIR)$(ASTDATADIR)/phoneprov
 699         @for x in phoneprov/*; do \
 700                 dst="$(DESTDIR)$(ASTDATADIR)/$$x" ;     \
 701                 if [ -f $${dst} ]; then \
 702                         if [ "$(OVERWRITE)" = "y" ]; then \
 703                                 if cmp -s $${dst} $$x ; then \
 704                                         echo "Config file $$x is unchanged"; \
 705                                         continue; \
 706                                 fi ; \
 707                                 mv -f $${dst} $${dst}.old ; \
 708                         else \
 709                                 echo "Skipping config file $$x"; \
 710                                 continue; \
 711                         fi ;\
 712                 fi ; \
 713                 echo "Installing file $$x"; \
 714                 $(INSTALL) -m 644 $$x $${dst} ;\
 715         done
 716
 717 webvmail:
 718         @[ -d $(DESTDIR)$(HTTP_DOCSDIR)/ ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
 719         @[ -d $(DESTDIR)$(HTTP_CGIDIR) ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
 720         $(INSTALL) -m 4755 -o root -g root contrib/scripts/vmail.cgi $(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi
 721         mkdir -p $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk
 722         for x in images/*.gif; do \
 723                 $(INSTALL) -m 644 $$x $(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/; \
 724         done
 725         @echo " +--------- Asterisk Web Voicemail ----------+"
 726         @echo " +                                           +"
 727         @echo " + Asterisk Web Voicemail is installed in    +"
 728         @echo " + your cgi-bin directory:                   +"
 729         @echo " + $(DESTDIR)$(HTTP_CGIDIR)"
 730         @echo " + IT USES A SETUID ROOT PERL SCRIPT, SO     +"
 731         @echo " + IF YOU DON'T LIKE THAT, UNINSTALL IT!     +"
 732         @echo " +                                           +"
 733         @echo " + Other static items have been stored in:   +"
 734         @echo " + $(DESTDIR)$(HTTP_DOCSDIR)"
 735         @echo " +                                           +"
 736         @echo " + If these paths do not match your httpd    +"
 737         @echo " + installation, correct the definitions     +"
 738         @echo " + in your Makefile of HTTP_CGIDIR and       +"
 739         @echo " + HTTP_DOCSDIR                              +"
 740         @echo " +                                           +"
 741         @echo " +-------------------------------------------+"
 742
 743 spec:
 744         sed "s/^Version:.*/Version: $(RPMVERSION)/g" redhat/asterisk.spec > asterisk.spec ; \
 745
 746 rpm: __rpm
 747
 748 __rpm: main/version.c include/asterisk/version.h include/asterisk/buildopts.h spec
 749         rm -rf /tmp/asterisk ; \
 750         mkdir -p /tmp/asterisk/redhat/RPMS/i386 ; \
 751         $(MAKE) DESTDIR=/tmp/asterisk install ; \
 752         $(MAKE) DESTDIR=/tmp/asterisk samples ; \
 753         mkdir -p /tmp/asterisk/etc/rc.d/init.d ; \
 754         cp -f contrib/init.d/rc.redhat.asterisk /tmp/asterisk/etc/rc.d/init.d/asterisk ; \
 755         rpmbuild --rcfile /usr/lib/rpm/rpmrc:redhat/rpmrc -bb asterisk.spec
 756
 757 progdocs:
 758         (cat contrib/asterisk-ng-doxygen; echo "HAVE_DOT=$(HAVEDOT)"; \
 759         echo "PROJECT_NUMBER=$(ASTERISKVERSION)") | doxygen -
 760
 761 install-logrotate:
 762         if [ ! -d $(ASTETCDIR)/../logrotate.d ]; then \
 763                 mkdir $(ASTETCDIR)/../logrotate.d ; \
 764         fi
 765         sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
 766         install -m 0644 contrib/scripts/asterisk.logrotate.tmp $(ASTETCDIR)/../logrotate.d/asterisk
 767         rm -f contrib/scripts/asterisk.logrotate.tmp
 768
 769 config:
 770         @if [ "${OSARCH}" = "linux-gnu" ]; then \
 771                 if [ -f /etc/redhat-release -o -f /etc/fedora-release ]; then \
 772                         $(INSTALL) -m 755 contrib/init.d/rc.redhat.asterisk $(DESTDIR)/etc/rc.d/init.d/asterisk; \
 773                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
 774                 elif [ -f /etc/debian_version ]; then \
 775                         $(INSTALL) -m 755 contrib/init.d/rc.debian.asterisk $(DESTDIR)/etc/init.d/asterisk; \
 776                         if [ -z "$(DESTDIR)" ]; then /usr/sbin/update-rc.d asterisk start 50 2 3 4 5 . stop 91 2 3 4 5 .; fi; \
 777                 elif [ -f /etc/gentoo-release ]; then \
 778                         $(INSTALL) -m 755 contrib/init.d/rc.gentoo.asterisk $(DESTDIR)/etc/init.d/asterisk; \
 779                         if [ -z "$(DESTDIR)" ]; then /sbin/rc-update add asterisk default; fi; \
 780                 elif [ -f /etc/mandrake-release -o -f /etc/mandriva-release ]; then \
 781                         $(INSTALL) -m 755 contrib/init.d/rc.mandrake.asterisk $(DESTDIR)/etc/rc.d/init.d/asterisk; \
 782                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
 783                 elif [ -f /etc/SuSE-release -o -f /etc/novell-release ]; then \
 784                         $(INSTALL) -m 755 contrib/init.d/rc.suse.asterisk $(DESTDIR)/etc/init.d/asterisk; \
 785                         if [ -z "$(DESTDIR)" ]; then /sbin/chkconfig --add asterisk; fi; \
 786                 elif [ -f /etc/slackware-version ]; then \
 787                         echo "Slackware is not currently supported, although an init script does exist for it." \
 788                 else \
 789                         echo "We could not install init scripts for your distribution."; \
 790                 fi \
 791         else \
 792                 echo "We could not install init scripts for your operating system."; \
 793         fi
 794
 795 sounds:
 796         $(MAKE) -C sounds all
 797
 798 # If the cleancount has been changed, force a make clean.
 799 # .cleancount is the global clean count, and .lastclean is the
 800 # last clean count we had
 801
 802 cleantest:
 803         @cmp -s .cleancount .lastclean || $(MAKE) clean
 804
 805 $(SUBDIRS_UNINSTALL):
 806         @$(MAKE) $(PRINT_DIR) -C $(@:-uninstall=) uninstall
 807
 808 _uninstall: $(SUBDIRS_UNINSTALL)
 809         rm -f $(DESTDIR)$(MODULES_DIR)/*
 810         rm -f $(DESTDIR)$(ASTSBINDIR)/*asterisk*
 811         rm -f $(DESTDIR)$(ASTSBINDIR)/astgenkey
 812         rm -f $(DESTDIR)$(ASTSBINDIR)/autosupport
 813         rm -rf $(DESTDIR)$(ASTHEADERDIR)
 814         rm -rf $(DESTDIR)$(ASTDATADIR)/firmware
 815         rm -f $(DESTDIR)$(ASTMANDIR)/man8/asterisk.8
 816         rm -f $(DESTDIR)$(ASTMANDIR)/man8/astgenkey.8
 817         rm -f $(DESTDIR)$(ASTMANDIR)/man8/autosupport.8
 818         rm -f $(DESTDIR)$(ASTMANDIR)/man8/safe_asterisk.8
 819         $(MAKE) -C sounds uninstall
 820
 821 uninstall: _uninstall
 822         @echo " +--------- Asterisk Uninstall Complete -----+"
 823         @echo " + Asterisk binaries, sounds, man pages,     +"
 824         @echo " + headers, modules, and firmware builds,    +"
 825         @echo " + have all been uninstalled.                +"
 826         @echo " +                                           +"
 827         @echo " + To remove ALL traces of Asterisk,         +"
 828         @echo " + including configuration, spool            +"
 829         @echo " + directories, and logs, run the following  +"
 830         @echo " + command:                                  +"
 831         @echo " +                                           +"
 832         @echo " +            $(mK) uninstall-all            +"
 833         @echo " +-------------------------------------------+"
 834
 835 uninstall-all: _uninstall
 836         rm -rf $(DESTDIR)$(ASTLIBDIR)
 837         rm -rf $(DESTDIR)$(ASTVARLIBDIR)
 838         rm -rf $(DESTDIR)$(ASTDATADIR)
 839         rm -rf $(DESTDIR)$(ASTSPOOLDIR)
 840         rm -rf $(DESTDIR)$(ASTETCDIR)
 841         rm -rf $(DESTDIR)$(ASTLOGDIR)
 842
 843 menuconfig: menuselect
 844
 845 cmenuconfig: cmenuselect
 846
 847 gmenuconfig: gmenuselect
 848
 849 nmenuconfig: nmenuselect
 850
 851 menuselect: menuselect/cmenuselect menuselect/nmenuselect menuselect/gmenuselect
 852         @if [ -x menuselect/nmenuselect ]; then \
 853                 $(MAKE) nmenuselect; \
 854         elif [ -x menuselect/cmenuselect ]; then \
 855                 $(MAKE) cmenuselect; \
 856         elif [ -x menuselect/gmenuselect ]; then \
 857                 $(MAKE) gmenuselect; \
 858         else \
 859                 echo "No menuselect user interface found. Install ncurses,"; \
 860                 echo "newt or GTK libraries to build one and re-rerun"; \
 861                 echo "'make menuselect'."; \
 862         fi
 863
 864 cmenuselect: menuselect/cmenuselect menuselect-tree
 865         -@menuselect/cmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
 866
 867 gmenuselect: menuselect/gmenuselect menuselect-tree
 868         -@menuselect/gmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
 869
 870 nmenuselect: menuselect/nmenuselect menuselect-tree
 871         -@menuselect/nmenuselect menuselect.makeopts $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS) && (echo "menuselect changes saved!"; rm -f channels/h323/Makefile.ast main/asterisk) || echo "menuselect changes NOT saved!"
 872
 873 # options for make in menuselect/
 874 MAKE_MENUSELECT=CC="$(HOST_CC)" CXX="$(CXX)" LD="" AR="" RANLIB="" CFLAGS="" $(MAKE) -C menuselect CONFIGURE_SILENT="--silent"
 875
 876 menuselect/menuselect: menuselect/makeopts
 877         $(MAKE_MENUSELECT) menuselect
 878
 879 menuselect/cmenuselect: menuselect/makeopts
 880         $(MAKE_MENUSELECT) cmenuselect
 881
 882 menuselect/gmenuselect: menuselect/makeopts
 883         $(MAKE_MENUSELECT) gmenuselect
 884
 885 menuselect/nmenuselect: menuselect/makeopts
 886         $(MAKE_MENUSELECT) nmenuselect
 887
 888 menuselect/makeopts: makeopts
 889         $(MAKE_MENUSELECT) makeopts
 890
 891 menuselect-tree: $(foreach dir,$(filter-out main,$(MOD_SUBDIRS)),$(wildcard $(dir)/*.c) $(wildcard $(dir)/*.cc)) build_tools/cflags.xml build_tools/cflags-devmode.xml sounds/sounds.xml build_tools/embed_modules.xml configure
 892         @echo "Generating input for menuselect ..."
 893         @echo "<?xml version=\"1.0\"?>" > $@
 894         @echo >> $@
 895         @echo "<menu name=\"Asterisk Module and Build Option Selection\">" >> $@
 896         @for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SUBMAKE) -C $${dir} SUBDIR=$${dir} moduleinfo >> $@; done
 897         @cat build_tools/cflags.xml >> $@
 898         @for dir in $(sort $(filter-out main,$(MOD_SUBDIRS))); do $(SUBMAKE) -C $${dir} SUBDIR=$${dir} makeopts >> $@; done
 899         @if [ "${AST_DEVMODE}" = "yes" ]; then \
 900                 cat build_tools/cflags-devmode.xml >> $@; \
 901         fi
 902         @cat build_tools/embed_modules.xml >> $@
 903         @cat sounds/sounds.xml >> $@
 904         @echo "</menu>" >> $@
 905
 906 pdf: asterisk.pdf
 907 asterisk.pdf:
 908         $(MAKE) -C doc/tex asterisk.pdf
 909
 910 .PHONY: menuselect menuselect.makeopts main sounds clean dist-clean distclean all prereqs cleantest uninstall _uninstall uninstall-all pdf dont-optimize $(SUBDIRS_INSTALL) $(SUBDIRS_DIST_CLEAN) $(SUBDIRS_CLEAN) $(SUBDIRS_UNINSTALL) $(SUBDIRS) $(MOD_SUBDIRS_EMBED_LDSCRIPT) $(MOD_SUBDIRS_EMBED_LDFLAGS) $(MOD_SUBDIRS_EMBED_LIBS) badshell main/version.c include/asterisk/version.h installdirs