2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
30 #include "audio/audio.h"
36 #include "hpet_emul.h"
40 /* output Bochs bios info messages */
43 /* Show multiboot debug output */
44 //#define DEBUG_MULTIBOOT
46 #define BIOS_FILENAME "bios.bin"
47 #define VGABIOS_FILENAME "vgabios.bin"
48 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
50 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
52 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
53 #define ACPI_DATA_SIZE 0x10000
54 #define BIOS_CFG_IOPORT 0x510
55 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
56 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
60 static fdctrl_t
*floppy_controller
;
61 static RTCState
*rtc_state
;
63 static IOAPICState
*ioapic
;
64 static PCIDevice
*i440fx_state
;
66 typedef struct rom_reset_data
{
68 target_phys_addr_t addr
;
72 static void option_rom_reset(void *_rrd
)
74 RomResetData
*rrd
= _rrd
;
76 cpu_physical_memory_write_rom(rrd
->addr
, rrd
->data
, rrd
->size
);
79 static void option_rom_setup_reset(target_phys_addr_t addr
, unsigned size
)
81 RomResetData
*rrd
= qemu_malloc(sizeof *rrd
);
83 rrd
->data
= qemu_malloc(size
);
84 cpu_physical_memory_read(addr
, rrd
->data
, size
);
87 qemu_register_reset(option_rom_reset
, rrd
);
90 static void ioport80_write(void *opaque
, uint32_t addr
, uint32_t data
)
94 /* MSDOS compatibility mode FPU exception support */
95 static qemu_irq ferr_irq
;
96 /* XXX: add IGNNE support */
97 void cpu_set_ferr(CPUX86State
*s
)
99 qemu_irq_raise(ferr_irq
);
102 static void ioportF0_write(void *opaque
, uint32_t addr
, uint32_t data
)
104 qemu_irq_lower(ferr_irq
);
108 uint64_t cpu_get_tsc(CPUX86State
*env
)
110 /* Note: when using kqemu, it is more logical to return the host TSC
111 because kqemu does not trap the RDTSC instruction for
112 performance reasons */
114 if (env
->kqemu_enabled
) {
115 return cpu_get_real_ticks();
119 return cpu_get_ticks();
124 void cpu_smm_update(CPUState
*env
)
126 if (i440fx_state
&& env
== first_cpu
)
127 i440fx_set_smm(i440fx_state
, (env
->hflags
>> HF_SMM_SHIFT
) & 1);
132 int cpu_get_pic_interrupt(CPUState
*env
)
136 intno
= apic_get_interrupt(env
);
138 /* set irq request if a PIC irq is still pending */
139 /* XXX: improve that */
140 pic_update_irq(isa_pic
);
143 /* read the irq from the PIC */
144 if (!apic_accept_pic_intr(env
))
147 intno
= pic_read_irq(isa_pic
);
151 static void pic_irq_request(void *opaque
, int irq
, int level
)
153 CPUState
*env
= first_cpu
;
155 if (env
->apic_state
) {
157 if (apic_accept_pic_intr(env
))
158 apic_deliver_pic_intr(env
, level
);
163 cpu_interrupt(env
, CPU_INTERRUPT_HARD
);
165 cpu_reset_interrupt(env
, CPU_INTERRUPT_HARD
);
169 /* PC cmos mappings */
171 #define REG_EQUIPMENT_BYTE 0x14
173 static int cmos_get_fd_drive_type(int fd0
)
179 /* 1.44 Mb 3"5 drive */
183 /* 2.88 Mb 3"5 drive */
187 /* 1.2 Mb 5"5 drive */
197 static void cmos_init_hd(int type_ofs
, int info_ofs
, BlockDriverState
*hd
)
199 RTCState
*s
= rtc_state
;
200 int cylinders
, heads
, sectors
;
201 bdrv_get_geometry_hint(hd
, &cylinders
, &heads
, §ors
);
202 rtc_set_memory(s
, type_ofs
, 47);
203 rtc_set_memory(s
, info_ofs
, cylinders
);
204 rtc_set_memory(s
, info_ofs
+ 1, cylinders
>> 8);
205 rtc_set_memory(s
, info_ofs
+ 2, heads
);
206 rtc_set_memory(s
, info_ofs
+ 3, 0xff);
207 rtc_set_memory(s
, info_ofs
+ 4, 0xff);
208 rtc_set_memory(s
, info_ofs
+ 5, 0xc0 | ((heads
> 8) << 3));
209 rtc_set_memory(s
, info_ofs
+ 6, cylinders
);
210 rtc_set_memory(s
, info_ofs
+ 7, cylinders
>> 8);
211 rtc_set_memory(s
, info_ofs
+ 8, sectors
);
214 /* convert boot_device letter to something recognizable by the bios */
215 static int boot_device2nibble(char boot_device
)
217 switch(boot_device
) {
220 return 0x01; /* floppy boot */
222 return 0x02; /* hard drive boot */
224 return 0x03; /* CD-ROM boot */
226 return 0x04; /* Network boot */
231 /* copy/pasted from cmos_init, should be made a general function
232 and used there as well */
233 static int pc_boot_set(void *opaque
, const char *boot_device
)
235 Monitor
*mon
= cur_mon
;
236 #define PC_MAX_BOOT_DEVICES 3
237 RTCState
*s
= (RTCState
*)opaque
;
238 int nbds
, bds
[3] = { 0, };
241 nbds
= strlen(boot_device
);
242 if (nbds
> PC_MAX_BOOT_DEVICES
) {
243 monitor_printf(mon
, "Too many boot devices for PC\n");
246 for (i
= 0; i
< nbds
; i
++) {
247 bds
[i
] = boot_device2nibble(boot_device
[i
]);
249 monitor_printf(mon
, "Invalid boot device for PC: '%c'\n",
254 rtc_set_memory(s
, 0x3d, (bds
[1] << 4) | bds
[0]);
255 rtc_set_memory(s
, 0x38, (bds
[2] << 4));
259 /* hd_table must contain 4 block drivers */
260 static void cmos_init(ram_addr_t ram_size
, ram_addr_t above_4g_mem_size
,
261 const char *boot_device
, BlockDriverState
**hd_table
)
263 RTCState
*s
= rtc_state
;
264 int nbds
, bds
[3] = { 0, };
269 /* various important CMOS locations needed by PC/Bochs bios */
272 val
= 640; /* base memory in K */
273 rtc_set_memory(s
, 0x15, val
);
274 rtc_set_memory(s
, 0x16, val
>> 8);
276 val
= (ram_size
/ 1024) - 1024;
279 rtc_set_memory(s
, 0x17, val
);
280 rtc_set_memory(s
, 0x18, val
>> 8);
281 rtc_set_memory(s
, 0x30, val
);
282 rtc_set_memory(s
, 0x31, val
>> 8);
284 if (above_4g_mem_size
) {
285 rtc_set_memory(s
, 0x5b, (unsigned int)above_4g_mem_size
>> 16);
286 rtc_set_memory(s
, 0x5c, (unsigned int)above_4g_mem_size
>> 24);
287 rtc_set_memory(s
, 0x5d, (uint64_t)above_4g_mem_size
>> 32);
290 if (ram_size
> (16 * 1024 * 1024))
291 val
= (ram_size
/ 65536) - ((16 * 1024 * 1024) / 65536);
296 rtc_set_memory(s
, 0x34, val
);
297 rtc_set_memory(s
, 0x35, val
>> 8);
299 /* set the number of CPU */
300 rtc_set_memory(s
, 0x5f, smp_cpus
- 1);
302 /* set boot devices, and disable floppy signature check if requested */
303 #define PC_MAX_BOOT_DEVICES 3
304 nbds
= strlen(boot_device
);
305 if (nbds
> PC_MAX_BOOT_DEVICES
) {
306 fprintf(stderr
, "Too many boot devices for PC\n");
309 for (i
= 0; i
< nbds
; i
++) {
310 bds
[i
] = boot_device2nibble(boot_device
[i
]);
312 fprintf(stderr
, "Invalid boot device for PC: '%c'\n",
317 rtc_set_memory(s
, 0x3d, (bds
[1] << 4) | bds
[0]);
318 rtc_set_memory(s
, 0x38, (bds
[2] << 4) | (fd_bootchk
? 0x0 : 0x1));
322 fd0
= fdctrl_get_drive_type(floppy_controller
, 0);
323 fd1
= fdctrl_get_drive_type(floppy_controller
, 1);
325 val
= (cmos_get_fd_drive_type(fd0
) << 4) | cmos_get_fd_drive_type(fd1
);
326 rtc_set_memory(s
, 0x10, val
);
338 val
|= 0x01; /* 1 drive, ready for boot */
341 val
|= 0x41; /* 2 drives, ready for boot */
344 val
|= 0x02; /* FPU is there */
345 val
|= 0x04; /* PS/2 mouse installed */
346 rtc_set_memory(s
, REG_EQUIPMENT_BYTE
, val
);
350 rtc_set_memory(s
, 0x12, (hd_table
[0] ? 0xf0 : 0) | (hd_table
[1] ? 0x0f : 0));
352 cmos_init_hd(0x19, 0x1b, hd_table
[0]);
354 cmos_init_hd(0x1a, 0x24, hd_table
[1]);
357 for (i
= 0; i
< 4; i
++) {
359 int cylinders
, heads
, sectors
, translation
;
360 /* NOTE: bdrv_get_geometry_hint() returns the physical
361 geometry. It is always such that: 1 <= sects <= 63, 1
362 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
363 geometry can be different if a translation is done. */
364 translation
= bdrv_get_translation_hint(hd_table
[i
]);
365 if (translation
== BIOS_ATA_TRANSLATION_AUTO
) {
366 bdrv_get_geometry_hint(hd_table
[i
], &cylinders
, &heads
, §ors
);
367 if (cylinders
<= 1024 && heads
<= 16 && sectors
<= 63) {
368 /* No translation. */
371 /* LBA translation. */
377 val
|= translation
<< (i
* 2);
380 rtc_set_memory(s
, 0x39, val
);
383 void ioport_set_a20(int enable
)
385 /* XXX: send to all CPUs ? */
386 cpu_x86_set_a20(first_cpu
, enable
);
389 int ioport_get_a20(void)
391 return ((first_cpu
->a20_mask
>> 20) & 1);
394 static void ioport92_write(void *opaque
, uint32_t addr
, uint32_t val
)
396 ioport_set_a20((val
>> 1) & 1);
397 /* XXX: bit 0 is fast reset */
400 static uint32_t ioport92_read(void *opaque
, uint32_t addr
)
402 return ioport_get_a20() << 1;
405 /***********************************************************/
406 /* Bochs BIOS debug ports */
408 static void bochs_bios_write(void *opaque
, uint32_t addr
, uint32_t val
)
410 static const char shutdown_str
[8] = "Shutdown";
411 static int shutdown_index
= 0;
414 /* Bochs BIOS messages */
417 fprintf(stderr
, "BIOS panic at rombios.c, line %d\n", val
);
422 fprintf(stderr
, "%c", val
);
426 /* same as Bochs power off */
427 if (val
== shutdown_str
[shutdown_index
]) {
429 if (shutdown_index
== 8) {
431 qemu_system_shutdown_request();
438 /* LGPL'ed VGA BIOS messages */
441 fprintf(stderr
, "VGA BIOS panic, line %d\n", val
);
446 fprintf(stderr
, "%c", val
);
452 extern uint64_t node_cpumask
[MAX_NODES
];
454 static void *bochs_bios_init(void)
457 uint8_t *smbios_table
;
459 uint64_t *numa_fw_cfg
;
462 register_ioport_write(0x400, 1, 2, bochs_bios_write
, NULL
);
463 register_ioport_write(0x401, 1, 2, bochs_bios_write
, NULL
);
464 register_ioport_write(0x402, 1, 1, bochs_bios_write
, NULL
);
465 register_ioport_write(0x403, 1, 1, bochs_bios_write
, NULL
);
466 register_ioport_write(0x8900, 1, 1, bochs_bios_write
, NULL
);
468 register_ioport_write(0x501, 1, 2, bochs_bios_write
, NULL
);
469 register_ioport_write(0x502, 1, 2, bochs_bios_write
, NULL
);
470 register_ioport_write(0x500, 1, 1, bochs_bios_write
, NULL
);
471 register_ioport_write(0x503, 1, 1, bochs_bios_write
, NULL
);
473 fw_cfg
= fw_cfg_init(BIOS_CFG_IOPORT
, BIOS_CFG_IOPORT
+ 1, 0, 0);
475 fw_cfg_add_i32(fw_cfg
, FW_CFG_ID
, 1);
476 fw_cfg_add_i64(fw_cfg
, FW_CFG_RAM_SIZE
, (uint64_t)ram_size
);
477 fw_cfg_add_bytes(fw_cfg
, FW_CFG_ACPI_TABLES
, (uint8_t *)acpi_tables
,
480 smbios_table
= smbios_get_table(&smbios_len
);
482 fw_cfg_add_bytes(fw_cfg
, FW_CFG_SMBIOS_ENTRIES
,
483 smbios_table
, smbios_len
);
485 /* allocate memory for the NUMA channel: one (64bit) word for the number
486 * of nodes, one word for each VCPU->node and one word for each node to
487 * hold the amount of memory.
489 numa_fw_cfg
= qemu_mallocz((1 + smp_cpus
+ nb_numa_nodes
) * 8);
490 numa_fw_cfg
[0] = cpu_to_le64(nb_numa_nodes
);
491 for (i
= 0; i
< smp_cpus
; i
++) {
492 for (j
= 0; j
< nb_numa_nodes
; j
++) {
493 if (node_cpumask
[j
] & (1 << i
)) {
494 numa_fw_cfg
[i
+ 1] = cpu_to_le64(j
);
499 for (i
= 0; i
< nb_numa_nodes
; i
++) {
500 numa_fw_cfg
[smp_cpus
+ 1 + i
] = cpu_to_le64(node_mem
[i
]);
502 fw_cfg_add_bytes(fw_cfg
, FW_CFG_NUMA
, (uint8_t *)numa_fw_cfg
,
503 (1 + smp_cpus
+ nb_numa_nodes
) * 8);
508 /* Generate an initial boot sector which sets state and jump to
509 a specified vector */
510 static void generate_bootsect(target_phys_addr_t option_rom
,
511 uint32_t gpr
[8], uint16_t segs
[6], uint16_t ip
)
513 uint8_t rom
[512], *p
, *reloc
;
517 memset(rom
, 0, sizeof(rom
));
520 /* Make sure we have an option rom signature */
524 /* ROM size in sectors*/
529 *p
++ = 0x50; /* push ax */
530 *p
++ = 0x1e; /* push ds */
531 *p
++ = 0x31; *p
++ = 0xc0; /* xor ax, ax */
532 *p
++ = 0x8e; *p
++ = 0xd8; /* mov ax, ds */
534 *p
++ = 0xc7; *p
++ = 0x06; /* movvw _start,0x64 */
535 *p
++ = 0x64; *p
++ = 0x00;
537 *p
++ = 0x00; *p
++ = 0x00;
539 *p
++ = 0x8c; *p
++ = 0x0e; /* mov cs,0x66 */
540 *p
++ = 0x66; *p
++ = 0x00;
542 *p
++ = 0x1f; /* pop ds */
543 *p
++ = 0x58; /* pop ax */
544 *p
++ = 0xcb; /* lret */
549 *p
++ = 0xfa; /* CLI */
550 *p
++ = 0xfc; /* CLD */
552 for (i
= 0; i
< 6; i
++) {
553 if (i
== 1) /* Skip CS */
556 *p
++ = 0xb8; /* MOV AX,imm16 */
559 *p
++ = 0x8e; /* MOV <seg>,AX */
560 *p
++ = 0xc0 + (i
<< 3);
563 for (i
= 0; i
< 8; i
++) {
564 *p
++ = 0x66; /* 32-bit operand size */
565 *p
++ = 0xb8 + i
; /* MOV <reg>,imm32 */
572 *p
++ = 0xea; /* JMP FAR */
575 *p
++ = segs
[1]; /* CS */
580 for (i
= 0; i
< (sizeof(rom
) - 1); i
++)
582 rom
[sizeof(rom
) - 1] = -sum
;
584 cpu_physical_memory_write_rom(option_rom
, rom
, sizeof(rom
));
585 option_rom_setup_reset(option_rom
, sizeof (rom
));
588 static long get_file_size(FILE *f
)
592 /* XXX: on Unix systems, using fstat() probably makes more sense */
595 fseek(f
, 0, SEEK_END
);
597 fseek(f
, where
, SEEK_SET
);
602 #define MULTIBOOT_STRUCT_ADDR 0x9000
604 #if MULTIBOOT_STRUCT_ADDR > 0xf0000
605 #error multiboot struct needs to fit in 16 bit real mode
608 static int load_multiboot(void *fw_cfg
,
610 const char *kernel_filename
,
611 const char *initrd_filename
,
612 const char *kernel_cmdline
,
615 int i
, t
, is_multiboot
= 0;
617 uint32_t mh_entry_addr
;
618 uint32_t mh_load_addr
;
619 uint32_t mb_kernel_size
;
620 uint32_t mmap_addr
= MULTIBOOT_STRUCT_ADDR
;
621 uint32_t mb_bootinfo
= MULTIBOOT_STRUCT_ADDR
+ 0x500;
622 uint32_t mb_cmdline
= mb_bootinfo
+ 0x200;
625 /* Ok, let's see if it is a multiboot image.
626 The header is 12x32bit long, so the latest entry may be 8192 - 48. */
627 for (i
= 0; i
< (8192 - 48); i
+= 4) {
628 if (ldl_p(header
+i
) == 0x1BADB002) {
629 uint32_t checksum
= ldl_p(header
+i
+8);
630 flags
= ldl_p(header
+i
+4);
632 checksum
+= (uint32_t)0x1BADB002;
641 return 0; /* no multiboot */
643 #ifdef DEBUG_MULTIBOOT
644 fprintf(stderr
, "qemu: I believe we found a multiboot image!\n");
647 if (flags
& 0x00000004) { /* MULTIBOOT_HEADER_HAS_VBE */
648 fprintf(stderr
, "qemu: multiboot knows VBE. we don't.\n");
650 if (!(flags
& 0x00010000)) { /* MULTIBOOT_HEADER_HAS_ADDR */
654 kernel_size
= load_elf(kernel_filename
, 0, &elf_entry
, NULL
, NULL
);
655 if (kernel_size
< 0) {
656 fprintf(stderr
, "Error while loading elf kernel\n");
659 mh_load_addr
= mh_entry_addr
= elf_entry
;
660 mb_kernel_size
= kernel_size
;
662 #ifdef DEBUG_MULTIBOOT
663 fprintf(stderr
, "qemu: loading multiboot-elf kernel (%#x bytes) with entry %#zx\n",
664 mb_kernel_size
, (size_t)mh_entry_addr
);
667 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_ADDR. */
668 uint32_t mh_header_addr
= ldl_p(header
+i
+12);
669 mh_load_addr
= ldl_p(header
+i
+16);
670 #ifdef DEBUG_MULTIBOOT
671 uint32_t mh_load_end_addr
= ldl_p(header
+i
+20);
672 uint32_t mh_bss_end_addr
= ldl_p(header
+i
+24);
674 uint32_t mb_kernel_text_offset
= i
- (mh_header_addr
- mh_load_addr
);
676 mh_entry_addr
= ldl_p(header
+i
+28);
677 mb_kernel_size
= get_file_size(f
) - mb_kernel_text_offset
;
679 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_VBE.
680 uint32_t mh_mode_type = ldl_p(header+i+32);
681 uint32_t mh_width = ldl_p(header+i+36);
682 uint32_t mh_height = ldl_p(header+i+40);
683 uint32_t mh_depth = ldl_p(header+i+44); */
685 #ifdef DEBUG_MULTIBOOT
686 fprintf(stderr
, "multiboot: mh_header_addr = %#x\n", mh_header_addr
);
687 fprintf(stderr
, "multiboot: mh_load_addr = %#x\n", mh_load_addr
);
688 fprintf(stderr
, "multiboot: mh_load_end_addr = %#x\n", mh_load_end_addr
);
689 fprintf(stderr
, "multiboot: mh_bss_end_addr = %#x\n", mh_bss_end_addr
);
692 fseek(f
, mb_kernel_text_offset
, SEEK_SET
);
694 #ifdef DEBUG_MULTIBOOT
695 fprintf(stderr
, "qemu: loading multiboot kernel (%#x bytes) at %#x\n",
696 mb_kernel_size
, mh_load_addr
);
699 if (!fread_targphys_ok(mh_load_addr
, mb_kernel_size
, f
)) {
700 fprintf(stderr
, "qemu: read error on multiboot kernel '%s' (%#x)\n",
701 kernel_filename
, mb_kernel_size
);
707 /* blob size is only the kernel for now */
708 mb_mod_end
= mh_load_addr
+ mb_kernel_size
;
711 stl_phys(mb_bootinfo
+ 20, 0x0); /* mods_count */
712 if (initrd_filename
) {
713 uint32_t mb_mod_info
= mb_bootinfo
+ 0x100;
714 uint32_t mb_mod_cmdline
= mb_bootinfo
+ 0x300;
715 uint32_t mb_mod_start
= mh_load_addr
;
716 uint32_t mb_mod_length
= mb_kernel_size
;
719 int mb_mod_count
= 0;
722 next_initrd
= strchr(initrd_filename
, ',');
725 /* if a space comes after the module filename, treat everything
726 after that as parameters */
727 cpu_physical_memory_write(mb_mod_cmdline
, (uint8_t*)initrd_filename
,
728 strlen(initrd_filename
) + 1);
729 stl_phys(mb_mod_info
+ 8, mb_mod_cmdline
); /* string */
730 mb_mod_cmdline
+= strlen(initrd_filename
) + 1;
731 if ((next_space
= strchr(initrd_filename
, ' ')))
733 #ifdef DEBUG_MULTIBOOT
734 printf("multiboot loading module: %s\n", initrd_filename
);
736 f
= fopen(initrd_filename
, "rb");
738 mb_mod_start
= (mb_mod_start
+ mb_mod_length
+ (TARGET_PAGE_SIZE
- 1))
739 & (TARGET_PAGE_MASK
);
740 mb_mod_length
= get_file_size(f
);
741 mb_mod_end
= mb_mod_start
+ mb_mod_length
;
743 if (!fread_targphys_ok(mb_mod_start
, mb_mod_length
, f
)) {
744 fprintf(stderr
, "qemu: read error on multiboot module '%s' (%#x)\n",
745 initrd_filename
, mb_mod_length
);
750 stl_phys(mb_mod_info
+ 0, mb_mod_start
);
751 stl_phys(mb_mod_info
+ 4, mb_mod_start
+ mb_mod_length
);
752 #ifdef DEBUG_MULTIBOOT
753 printf("mod_start: %#x\nmod_end: %#x\n", mb_mod_start
,
754 mb_mod_start
+ mb_mod_length
);
756 stl_phys(mb_mod_info
+ 12, 0x0); /* reserved */
758 initrd_filename
= next_initrd
+1;
760 } while (next_initrd
);
761 stl_phys(mb_bootinfo
+ 20, mb_mod_count
); /* mods_count */
762 stl_phys(mb_bootinfo
+ 24, mb_bootinfo
+ 0x100); /* mods_addr */
765 /* Make sure we're getting kernel + modules back after reset */
766 option_rom_setup_reset(mh_load_addr
, mb_mod_end
- mh_load_addr
);
768 /* Commandline support */
769 stl_phys(mb_bootinfo
+ 16, mb_cmdline
);
770 t
= strlen(kernel_filename
);
771 cpu_physical_memory_write(mb_cmdline
, (uint8_t*)kernel_filename
, t
);
773 stb_phys(mb_cmdline
++, ' ');
774 t
= strlen(kernel_cmdline
) + 1;
775 cpu_physical_memory_write(mb_cmdline
, (uint8_t*)kernel_cmdline
, t
);
777 /* the kernel is where we want it to be now */
779 #define MULTIBOOT_FLAGS_MEMORY (1 << 0)
780 #define MULTIBOOT_FLAGS_BOOT_DEVICE (1 << 1)
781 #define MULTIBOOT_FLAGS_CMDLINE (1 << 2)
782 #define MULTIBOOT_FLAGS_MODULES (1 << 3)
783 #define MULTIBOOT_FLAGS_MMAP (1 << 6)
784 stl_phys(mb_bootinfo
, MULTIBOOT_FLAGS_MEMORY
785 | MULTIBOOT_FLAGS_BOOT_DEVICE
786 | MULTIBOOT_FLAGS_CMDLINE
787 | MULTIBOOT_FLAGS_MODULES
788 | MULTIBOOT_FLAGS_MMAP
);
789 stl_phys(mb_bootinfo
+ 4, 640); /* mem_lower */
790 stl_phys(mb_bootinfo
+ 8, ram_size
/ 1024); /* mem_upper */
791 stl_phys(mb_bootinfo
+ 12, 0x8001ffff); /* XXX: use the -boot switch? */
792 stl_phys(mb_bootinfo
+ 48, mmap_addr
); /* mmap_addr */
794 #ifdef DEBUG_MULTIBOOT
795 fprintf(stderr
, "multiboot: mh_entry_addr = %#x\n", mh_entry_addr
);
798 /* Pass variables to option rom */
799 fw_cfg_add_i32(fw_cfg
, FW_CFG_KERNEL_ADDR
, mh_entry_addr
);
800 fw_cfg_add_i32(fw_cfg
, FW_CFG_INITRD_ADDR
, mb_bootinfo
);
801 fw_cfg_add_i32(fw_cfg
, FW_CFG_INITRD_SIZE
, mmap_addr
);
803 /* Make sure we're getting the config space back after reset */
804 option_rom_setup_reset(mb_bootinfo
, 0x500);
806 option_rom
[nb_option_roms
] = "multiboot.bin";
809 return 1; /* yes, we are multiboot */
812 static void load_linux(void *fw_cfg
,
813 target_phys_addr_t option_rom
,
814 const char *kernel_filename
,
815 const char *initrd_filename
,
816 const char *kernel_cmdline
,
817 target_phys_addr_t max_ram_size
)
823 int setup_size
, kernel_size
, initrd_size
= 0, cmdline_size
;
825 uint8_t header
[8192];
826 target_phys_addr_t real_addr
, prot_addr
, cmdline_addr
, initrd_addr
= 0;
830 /* Align to 16 bytes as a paranoia measure */
831 cmdline_size
= (strlen(kernel_cmdline
)+16) & ~15;
833 /* load the kernel header */
834 f
= fopen(kernel_filename
, "rb");
835 if (!f
|| !(kernel_size
= get_file_size(f
)) ||
836 fread(header
, 1, MIN(ARRAY_SIZE(header
), kernel_size
), f
) !=
837 MIN(ARRAY_SIZE(header
), kernel_size
)) {
838 fprintf(stderr
, "qemu: could not load kernel '%s'\n",
843 /* kernel protocol version */
845 fprintf(stderr
, "header magic: %#x\n", ldl_p(header
+0x202));
847 if (ldl_p(header
+0x202) == 0x53726448)
848 protocol
= lduw_p(header
+0x206);
850 /* This looks like a multiboot kernel. If it is, let's stop
851 treating it like a Linux kernel. */
852 if (load_multiboot(fw_cfg
, f
, kernel_filename
,
853 initrd_filename
, kernel_cmdline
, header
))
858 if (protocol
< 0x200 || !(header
[0x211] & 0x01)) {
861 cmdline_addr
= 0x9a000 - cmdline_size
;
863 } else if (protocol
< 0x202) {
864 /* High but ancient kernel */
866 cmdline_addr
= 0x9a000 - cmdline_size
;
867 prot_addr
= 0x100000;
869 /* High and recent kernel */
871 cmdline_addr
= 0x20000;
872 prot_addr
= 0x100000;
877 "qemu: real_addr = 0x" TARGET_FMT_plx
"\n"
878 "qemu: cmdline_addr = 0x" TARGET_FMT_plx
"\n"
879 "qemu: prot_addr = 0x" TARGET_FMT_plx
"\n",
885 /* highest address for loading the initrd */
886 if (protocol
>= 0x203)
887 initrd_max
= ldl_p(header
+0x22c);
889 initrd_max
= 0x37ffffff;
891 if (initrd_max
>= max_ram_size
-ACPI_DATA_SIZE
)
892 initrd_max
= max_ram_size
-ACPI_DATA_SIZE
-1;
894 /* kernel command line */
895 pstrcpy_targphys(cmdline_addr
, 4096, kernel_cmdline
);
897 if (protocol
>= 0x202) {
898 stl_p(header
+0x228, cmdline_addr
);
900 stw_p(header
+0x20, 0xA33F);
901 stw_p(header
+0x22, cmdline_addr
-real_addr
);
904 /* handle vga= parameter */
905 vmode
= strstr(kernel_cmdline
, "vga=");
907 unsigned int video_mode
;
910 if (!strncmp(vmode
, "normal", 6)) {
912 } else if (!strncmp(vmode
, "ext", 3)) {
914 } else if (!strncmp(vmode
, "ask", 3)) {
917 video_mode
= strtol(vmode
, NULL
, 0);
919 stw_p(header
+0x1fa, video_mode
);
923 /* High nybble = B reserved for Qemu; low nybble is revision number.
924 If this code is substantially changed, you may want to consider
925 incrementing the revision. */
926 if (protocol
>= 0x200)
927 header
[0x210] = 0xB0;
930 if (protocol
>= 0x201) {
931 header
[0x211] |= 0x80; /* CAN_USE_HEAP */
932 stw_p(header
+0x224, cmdline_addr
-real_addr
-0x200);
936 if (initrd_filename
) {
937 if (protocol
< 0x200) {
938 fprintf(stderr
, "qemu: linux kernel too old to load a ram disk\n");
942 fi
= fopen(initrd_filename
, "rb");
944 fprintf(stderr
, "qemu: could not load initial ram disk '%s'\n",
949 initrd_size
= get_file_size(fi
);
950 initrd_addr
= (initrd_max
-initrd_size
) & ~4095;
952 if (!fread_targphys_ok(initrd_addr
, initrd_size
, fi
)) {
953 fprintf(stderr
, "qemu: read error on initial ram disk '%s'\n",
959 stl_p(header
+0x218, initrd_addr
);
960 stl_p(header
+0x21c, initrd_size
);
963 /* store the finalized header and load the rest of the kernel */
964 cpu_physical_memory_write(real_addr
, header
, ARRAY_SIZE(header
));
966 setup_size
= header
[0x1f1];
970 setup_size
= (setup_size
+1)*512;
971 /* Size of protected-mode code */
972 kernel_size
-= (setup_size
> ARRAY_SIZE(header
)) ? setup_size
: ARRAY_SIZE(header
);
974 /* In case we have read too much already, copy that over */
975 if (setup_size
< ARRAY_SIZE(header
)) {
976 cpu_physical_memory_write(prot_addr
, header
+ setup_size
, ARRAY_SIZE(header
) - setup_size
);
977 prot_addr
+= (ARRAY_SIZE(header
) - setup_size
);
978 setup_size
= ARRAY_SIZE(header
);
981 if (!fread_targphys_ok(real_addr
+ ARRAY_SIZE(header
),
982 setup_size
- ARRAY_SIZE(header
), f
) ||
983 !fread_targphys_ok(prot_addr
, kernel_size
, f
)) {
984 fprintf(stderr
, "qemu: read error on kernel '%s'\n",
990 /* generate bootsector to set up the initial register state */
991 real_seg
= real_addr
>> 4;
992 seg
[0] = seg
[2] = seg
[3] = seg
[4] = seg
[4] = real_seg
;
993 seg
[1] = real_seg
+0x20; /* CS */
994 memset(gpr
, 0, sizeof gpr
);
995 gpr
[4] = cmdline_addr
-real_addr
-16; /* SP (-16 is paranoia) */
997 option_rom_setup_reset(real_addr
, setup_size
);
998 option_rom_setup_reset(prot_addr
, kernel_size
);
999 option_rom_setup_reset(cmdline_addr
, cmdline_size
);
1000 if (initrd_filename
)
1001 option_rom_setup_reset(initrd_addr
, initrd_size
);
1003 generate_bootsect(option_rom
, gpr
, seg
, 0);
1006 static const int ide_iobase
[2] = { 0x1f0, 0x170 };
1007 static const int ide_iobase2
[2] = { 0x3f6, 0x376 };
1008 static const int ide_irq
[2] = { 14, 15 };
1010 #define NE2000_NB_MAX 6
1012 static int ne2000_io
[NE2000_NB_MAX
] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
1013 static int ne2000_irq
[NE2000_NB_MAX
] = { 9, 10, 11, 3, 4, 5 };
1015 static int serial_io
[MAX_SERIAL_PORTS
] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
1016 static int serial_irq
[MAX_SERIAL_PORTS
] = { 4, 3, 4, 3 };
1018 static int parallel_io
[MAX_PARALLEL_PORTS
] = { 0x378, 0x278, 0x3bc };
1019 static int parallel_irq
[MAX_PARALLEL_PORTS
] = { 7, 7, 7 };
1022 static void audio_init (PCIBus
*pci_bus
, qemu_irq
*pic
)
1026 for (c
= soundhw
; c
->name
; ++c
) {
1029 c
->init
.init_isa(pic
);
1032 c
->init
.init_pci(pci_bus
);
1040 static void pc_init_ne2k_isa(NICInfo
*nd
, qemu_irq
*pic
)
1042 static int nb_ne2k
= 0;
1044 if (nb_ne2k
== NE2000_NB_MAX
)
1046 isa_ne2000_init(ne2000_io
[nb_ne2k
], pic
[ne2000_irq
[nb_ne2k
]], nd
);
1050 static int load_option_rom(const char *oprom
, target_phys_addr_t start
,
1051 target_phys_addr_t end
)
1056 filename
= qemu_find_file(QEMU_FILE_TYPE_BIOS
, oprom
);
1058 size
= get_image_size(filename
);
1059 if (size
> 0 && start
+ size
> end
) {
1060 fprintf(stderr
, "Not enough space to load option rom '%s'\n",
1064 size
= load_image_targphys(filename
, start
, end
- start
);
1065 qemu_free(filename
);
1070 fprintf(stderr
, "Could not load option rom '%s'\n", oprom
);
1073 /* Round up optiom rom size to the next 2k boundary */
1074 size
= (size
+ 2047) & ~2047;
1075 option_rom_setup_reset(start
, size
);
1079 int cpu_is_bsp(CPUState
*env
)
1081 return env
->cpuid_apic_id
== 0;
1084 static CPUState
*pc_new_cpu(const char *cpu_model
)
1088 env
= cpu_init(cpu_model
);
1090 fprintf(stderr
, "Unable to find x86 CPU definition\n");
1093 if ((env
->cpuid_features
& CPUID_APIC
) || smp_cpus
> 1) {
1094 env
->cpuid_apic_id
= env
->cpu_index
;
1095 /* APIC reset callback resets cpu */
1098 qemu_register_reset((QEMUResetHandler
*)cpu_reset
, env
);
1105 COMPAT_0_10
, /* compatible with qemu 0.10.x */
1108 /* PC hardware initialisation */
1109 static void pc_init1(ram_addr_t ram_size
,
1110 const char *boot_device
,
1111 const char *kernel_filename
,
1112 const char *kernel_cmdline
,
1113 const char *initrd_filename
,
1114 const char *cpu_model
,
1119 int ret
, linux_boot
, i
;
1120 ram_addr_t ram_addr
, bios_offset
, option_rom_offset
;
1121 ram_addr_t below_4g_mem_size
, above_4g_mem_size
= 0;
1122 int bios_size
, isa_bios_size
, oprom_area_size
;
1125 int piix3_devfn
= -1;
1130 BlockDriverState
*hd
[MAX_IDE_BUS
* MAX_IDE_DEVS
];
1131 BlockDriverState
*fd
[MAX_FD
];
1132 int using_vga
= cirrus_vga_enabled
|| std_vga_enabled
|| vmsvga_enabled
;
1134 const char *virtio_blk_name
, *virtio_console_name
;
1136 if (ram_size
>= 0xe0000000 ) {
1137 above_4g_mem_size
= ram_size
- 0xe0000000;
1138 below_4g_mem_size
= 0xe0000000;
1140 below_4g_mem_size
= ram_size
;
1143 linux_boot
= (kernel_filename
!= NULL
);
1146 if (cpu_model
== NULL
) {
1147 #ifdef TARGET_X86_64
1148 cpu_model
= "qemu64";
1150 cpu_model
= "qemu32";
1154 for (i
= 0; i
< smp_cpus
; i
++) {
1155 env
= pc_new_cpu(cpu_model
);
1161 ram_addr
= qemu_ram_alloc(0xa0000);
1162 cpu_register_physical_memory(0, 0xa0000, ram_addr
);
1164 /* Allocate, even though we won't register, so we don't break the
1165 * phys_ram_base + PA assumption. This range includes vga (0xa0000 - 0xc0000),
1166 * and some bios areas, which will be registered later
1168 ram_addr
= qemu_ram_alloc(0x100000 - 0xa0000);
1169 ram_addr
= qemu_ram_alloc(below_4g_mem_size
- 0x100000);
1170 cpu_register_physical_memory(0x100000,
1171 below_4g_mem_size
- 0x100000,
1174 /* above 4giga memory allocation */
1175 if (above_4g_mem_size
> 0) {
1176 #if TARGET_PHYS_ADDR_BITS == 32
1177 hw_error("To much RAM for 32-bit physical address");
1179 ram_addr
= qemu_ram_alloc(above_4g_mem_size
);
1180 cpu_register_physical_memory(0x100000000ULL
,
1188 if (bios_name
== NULL
)
1189 bios_name
= BIOS_FILENAME
;
1190 filename
= qemu_find_file(QEMU_FILE_TYPE_BIOS
, bios_name
);
1192 bios_size
= get_image_size(filename
);
1196 if (bios_size
<= 0 ||
1197 (bios_size
% 65536) != 0) {
1200 bios_offset
= qemu_ram_alloc(bios_size
);
1201 ret
= load_image(filename
, qemu_get_ram_ptr(bios_offset
));
1202 if (ret
!= bios_size
) {
1204 fprintf(stderr
, "qemu: could not load PC BIOS '%s'\n", bios_name
);
1208 qemu_free(filename
);
1210 /* map the last 128KB of the BIOS in ISA space */
1211 isa_bios_size
= bios_size
;
1212 if (isa_bios_size
> (128 * 1024))
1213 isa_bios_size
= 128 * 1024;
1214 cpu_register_physical_memory(0x100000 - isa_bios_size
,
1216 (bios_offset
+ bios_size
- isa_bios_size
) | IO_MEM_ROM
);
1220 option_rom_offset
= qemu_ram_alloc(0x20000);
1221 oprom_area_size
= 0;
1222 cpu_register_physical_memory(0xc0000, 0x20000, option_rom_offset
);
1225 const char *vgabios_filename
;
1227 if (cirrus_vga_enabled
) {
1228 vgabios_filename
= VGABIOS_CIRRUS_FILENAME
;
1230 vgabios_filename
= VGABIOS_FILENAME
;
1232 oprom_area_size
= load_option_rom(vgabios_filename
, 0xc0000, 0xe0000);
1234 /* Although video roms can grow larger than 0x8000, the area between
1235 * 0xc0000 - 0xc8000 is reserved for them. It means we won't be looking
1236 * for any other kind of option rom inside this area */
1237 if (oprom_area_size
< 0x8000)
1238 oprom_area_size
= 0x8000;
1240 /* map all the bios at the top of memory */
1241 cpu_register_physical_memory((uint32_t)(-bios_size
),
1242 bios_size
, bios_offset
| IO_MEM_ROM
);
1244 fw_cfg
= bochs_bios_init();
1247 load_linux(fw_cfg
, 0xc0000 + oprom_area_size
,
1248 kernel_filename
, initrd_filename
, kernel_cmdline
, below_4g_mem_size
);
1249 oprom_area_size
+= 2048;
1252 for (i
= 0; i
< nb_option_roms
; i
++) {
1253 oprom_area_size
+= load_option_rom(option_rom
[i
], 0xc0000 + oprom_area_size
,
1257 for (i
= 0; i
< nb_nics
; i
++) {
1258 char nic_oprom
[1024];
1259 const char *model
= nd_table
[i
].model
;
1261 if (!nd_table
[i
].bootable
)
1266 snprintf(nic_oprom
, sizeof(nic_oprom
), "pxe-%s.bin", model
);
1268 oprom_area_size
+= load_option_rom(nic_oprom
, 0xc0000 + oprom_area_size
,
1272 cpu_irq
= qemu_allocate_irqs(pic_irq_request
, NULL
, 1);
1273 i8259
= i8259_init(cpu_irq
[0]);
1274 ferr_irq
= i8259
[13];
1277 pci_bus
= i440fx_init(&i440fx_state
, i8259
);
1278 piix3_devfn
= piix3_init(pci_bus
, -1);
1283 /* init basic PC hardware */
1284 register_ioport_write(0x80, 1, 1, ioport80_write
, NULL
);
1286 register_ioport_write(0xf0, 1, 1, ioportF0_write
, NULL
);
1288 if (cirrus_vga_enabled
) {
1290 pci_cirrus_vga_init(pci_bus
);
1292 isa_cirrus_vga_init();
1294 } else if (vmsvga_enabled
) {
1296 pci_vmsvga_init(pci_bus
);
1298 fprintf(stderr
, "%s: vmware_vga: no PCI bus\n", __FUNCTION__
);
1299 } else if (std_vga_enabled
) {
1301 pci_vga_init(pci_bus
, 0, 0);
1307 rtc_state
= rtc_init(0x70, i8259
[8], 2000);
1309 qemu_register_boot_set(pc_boot_set
, rtc_state
);
1311 register_ioport_read(0x92, 1, 1, ioport92_read
, NULL
);
1312 register_ioport_write(0x92, 1, 1, ioport92_write
, NULL
);
1315 ioapic
= ioapic_init();
1317 pit
= pit_init(0x40, i8259
[0]);
1323 pic_set_alt_irq_func(isa_pic
, ioapic_set_irq
, ioapic
);
1326 for(i
= 0; i
< MAX_SERIAL_PORTS
; i
++) {
1327 if (serial_hds
[i
]) {
1328 serial_init(serial_io
[i
], i8259
[serial_irq
[i
]], 115200,
1333 for(i
= 0; i
< MAX_PARALLEL_PORTS
; i
++) {
1334 if (parallel_hds
[i
]) {
1335 parallel_init(parallel_io
[i
], i8259
[parallel_irq
[i
]],
1340 watchdog_pc_init(pci_bus
);
1342 for(i
= 0; i
< nb_nics
; i
++) {
1343 NICInfo
*nd
= &nd_table
[i
];
1345 if (!pci_enabled
|| (nd
->model
&& strcmp(nd
->model
, "ne2k_isa") == 0))
1346 pc_init_ne2k_isa(nd
, i8259
);
1348 pci_nic_init(nd
, "ne2k_pci", NULL
);
1351 piix4_acpi_system_hot_add_init();
1353 if (drive_get_max_bus(IF_IDE
) >= MAX_IDE_BUS
) {
1354 fprintf(stderr
, "qemu: too many IDE bus\n");
1358 for(i
= 0; i
< MAX_IDE_BUS
* MAX_IDE_DEVS
; i
++) {
1359 index
= drive_get_index(IF_IDE
, i
/ MAX_IDE_DEVS
, i
% MAX_IDE_DEVS
);
1361 hd
[i
] = drives_table
[index
].bdrv
;
1367 pci_piix3_ide_init(pci_bus
, hd
, piix3_devfn
+ 1, i8259
);
1369 for(i
= 0; i
< MAX_IDE_BUS
; i
++) {
1370 isa_ide_init(ide_iobase
[i
], ide_iobase2
[i
], i8259
[ide_irq
[i
]],
1371 hd
[MAX_IDE_DEVS
* i
], hd
[MAX_IDE_DEVS
* i
+ 1]);
1375 i8042_init(i8259
[1], i8259
[12], 0x60);
1378 audio_init(pci_enabled
? pci_bus
: NULL
, i8259
);
1381 for(i
= 0; i
< MAX_FD
; i
++) {
1382 index
= drive_get_index(IF_FLOPPY
, 0, i
);
1384 fd
[i
] = drives_table
[index
].bdrv
;
1388 floppy_controller
= fdctrl_init(i8259
[6], 2, 0, 0x3f0, fd
);
1390 cmos_init(below_4g_mem_size
, above_4g_mem_size
, boot_device
, hd
);
1392 if (pci_enabled
&& usb_enabled
) {
1393 usb_uhci_piix3_init(pci_bus
, piix3_devfn
+ 2);
1396 if (pci_enabled
&& acpi_enabled
) {
1397 uint8_t *eeprom_buf
= qemu_mallocz(8 * 256); /* XXX: make this persistent */
1400 /* TODO: Populate SPD eeprom data. */
1401 smbus
= piix4_pm_init(pci_bus
, piix3_devfn
+ 3, 0xb100, i8259
[9]);
1402 for (i
= 0; i
< 8; i
++) {
1403 DeviceState
*eeprom
;
1404 eeprom
= qdev_create((BusState
*)smbus
, "smbus-eeprom");
1405 qdev_prop_set_uint32(eeprom
, "address", 0x50 + i
);
1406 qdev_prop_set_ptr(eeprom
, "data", eeprom_buf
+ (i
* 256));
1412 i440fx_init_memory_mappings(i440fx_state
);
1419 max_bus
= drive_get_max_bus(IF_SCSI
);
1420 for (bus
= 0; bus
<= max_bus
; bus
++) {
1421 pci_create_simple(pci_bus
, -1, "lsi53c895a");
1425 switch (compat_level
) {
1426 case COMPAT_DEFAULT
:
1428 virtio_blk_name
= "virtio-blk-pci";
1429 virtio_console_name
= "virtio-console-pci";
1433 virtio_blk_name
= "virtio-blk-pci-0-10";
1434 virtio_console_name
= "virtio-console-pci-0-10";
1438 /* Add virtio block devices */
1443 while ((index
= drive_get_index(IF_VIRTIO
, 0, unit_id
)) != -1) {
1444 pci_dev
= pci_create(virtio_blk_name
,
1445 drives_table
[index
].devaddr
);
1446 qdev_init(&pci_dev
->qdev
);
1451 /* Add virtio balloon device */
1452 if (pci_enabled
&& virtio_balloon
) {
1453 pci_dev
= pci_create("virtio-balloon-pci", virtio_balloon_devaddr
);
1454 qdev_init(&pci_dev
->qdev
);
1457 /* Add virtio console devices */
1459 for(i
= 0; i
< MAX_VIRTIO_CONSOLES
; i
++) {
1460 if (virtcon_hds
[i
]) {
1461 pci_create_simple(pci_bus
, -1, virtio_console_name
);
1467 static void pc_init_pci(ram_addr_t ram_size
,
1468 const char *boot_device
,
1469 const char *kernel_filename
,
1470 const char *kernel_cmdline
,
1471 const char *initrd_filename
,
1472 const char *cpu_model
)
1474 pc_init1(ram_size
, boot_device
,
1475 kernel_filename
, kernel_cmdline
,
1476 initrd_filename
, cpu_model
,
1480 static void pc_init_isa(ram_addr_t ram_size
,
1481 const char *boot_device
,
1482 const char *kernel_filename
,
1483 const char *kernel_cmdline
,
1484 const char *initrd_filename
,
1485 const char *cpu_model
)
1487 pc_init1(ram_size
, boot_device
,
1488 kernel_filename
, kernel_cmdline
,
1489 initrd_filename
, cpu_model
,
1493 static void pc_init_pci_0_10(ram_addr_t ram_size
,
1494 const char *boot_device
,
1495 const char *kernel_filename
,
1496 const char *kernel_cmdline
,
1497 const char *initrd_filename
,
1498 const char *cpu_model
)
1500 pc_init1(ram_size
, boot_device
,
1501 kernel_filename
, kernel_cmdline
,
1502 initrd_filename
, cpu_model
,
1506 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
1507 BIOS will read it and start S3 resume at POST Entry */
1508 void cmos_set_s3_resume(void)
1511 rtc_set_memory(rtc_state
, 0xF, 0xFE);
1514 static QEMUMachine pc_machine
= {
1516 .desc
= "Standard PC",
1517 .init
= pc_init_pci
,
1522 static QEMUMachine isapc_machine
= {
1524 .desc
= "ISA-only PC",
1525 .init
= pc_init_isa
,
1529 static QEMUMachine pc_0_10_machine
= {
1531 .desc
= "Standard PC compatible with qemu 0.10.x",
1532 .init
= pc_init_pci_0_10
,
1536 static void pc_machine_init(void)
1538 qemu_register_machine(&pc_machine
);
1539 qemu_register_machine(&isapc_machine
);
1541 /* For compatibility with 0.10.x */
1542 qemu_register_machine(&pc_0_10_machine
);
1545 machine_init(pc_machine_init
);