Makefile

   1 # Makefile for QEMU.
   2
   3 ifneq ($(wildcard config-host.mak),)
   4 # Put the all: rule here so that config-host.mak can contain dependencies.
   5 all: build-all
   6 include config-host.mak
   7 include $(SRC_PATH)/rules.mak
   8 config-host.mak: configure
   9         @echo $@ is out-of-date, running configure
  10         @sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
  11 else
  12 config-host.mak:
  13         @echo "Please call configure before running make!"
  14         @exit 1
  15 endif
  16
  17 # Don't try to regenerate Makefile or configure
  18 # We don't generate any of them
  19 Makefile: ;
  20 configure: ;
  21
  22 .PHONY: all clean cscope distclean dvi html info install install-doc \
  23         recurse-all speed tar tarbin test build-all
  24
  25 VPATH=$(SRC_PATH):$(SRC_PATH)/hw
  26
  27 LIBS+=-lz $(LIBS_TOOLS)
  28
  29 ifdef BUILD_DOCS
  30 DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8
  31 else
  32 DOCS=
  33 endif
  34
  35 SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
  36 SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
  37
  38 config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
  39         $(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep "=y$$" | sort -u > $@,"  GEN  $@")
  40
  41 -include config-all-devices.mak
  42
  43 build-all: config-host.h config-all-devices.h $(DOCS) $(TOOLS)
  44         $(call quiet-command, $(MAKE) $(SUBDIR_MAKEFLAGS) recurse-all,)
  45
  46 config-host.h: config-host.h-timestamp
  47 config-host.h-timestamp: config-host.mak
  48
  49 config-all-devices.h: config-all-devices.h-timestamp
  50 config-all-devices.h-timestamp: config-all-devices.mak
  51
  52 SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
  53
  54 subdir-%: config-host.h config-all-devices.h
  55         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
  56
  57 $(filter %-softmmu,$(SUBDIR_RULES)): libqemu_common.a
  58
  59 $(filter %-user,$(SUBDIR_RULES)): libuser.a
  60
  61 libuser.a:
  62         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C libuser V="$(V)" TARGET_DIR="libuser/" all,)
  63
  64 ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
  65 romsubdir-%:
  66         $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
  67
  68 ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
  69
  70 recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
  71
  72 #######################################################################
  73 # block-obj-y is code used by both qemu system emulation and qemu-img
  74
  75 block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
  76 block-obj-y += nbd.o block.o aio.o aes.o osdep.o
  77 block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
  78 block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
  79
  80 block-nested-y += cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
  81 block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
  82 block-nested-y += parallels.o nbd.o
  83 block-nested-$(CONFIG_WIN32) += raw-win32.o
  84 block-nested-$(CONFIG_POSIX) += raw-posix.o
  85 block-nested-$(CONFIG_CURL) += curl.o
  86
  87 block-obj-y +=  $(addprefix block/, $(block-nested-y))
  88
  89 net-obj-y = net.o
  90 net-nested-y = queue.o
  91 net-obj-y += $(addprefix net/, $(net-nested-y))
  92
  93 ######################################################################
  94 # libqemu_common.a: Target independent part of system emulation. The
  95 # long term path is to suppress *all* target specific code in case of
  96 # system emulation, i.e. a single QEMU executable should support all
  97 # CPUs and machines.
  98
  99 obj-y = $(block-obj-y)
 100 obj-y += $(net-obj-y)
 101 obj-y += readline.o console.o
 102
 103 obj-y += tcg-runtime.o host-utils.o
 104 obj-y += irq.o ioport.o
 105 obj-$(CONFIG_PTIMER) += ptimer.o
 106 obj-$(CONFIG_MAX7310) += max7310.o
 107 obj-$(CONFIG_WM8750) += wm8750.o
 108 obj-$(CONFIG_TWL92230) += twl92230.o
 109 obj-$(CONFIG_TSC2005) += tsc2005.o
 110 obj-$(CONFIG_LM832X) += lm832x.o
 111 obj-$(CONFIG_TMP105) += tmp105.o
 112 obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
 113 obj-$(CONFIG_SSD0303) += ssd0303.o
 114 obj-$(CONFIG_SSD0323) += ssd0323.o
 115 obj-$(CONFIG_ADS7846) += ads7846.o
 116 obj-$(CONFIG_MAX111X) += max111x.o
 117 obj-y += i2c.o smbus.o smbus_eeprom.o
 118 obj-y += eeprom93xx.o
 119 obj-y += scsi-disk.o cdrom.o
 120 obj-y += scsi-generic.o scsi-bus.o
 121 obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
 122 obj-y += usb-serial.o usb-net.o usb-bus.o
 123 obj-$(CONFIG_SSI) += ssi.o
 124 obj-$(CONFIG_SSI_SD) += ssi-sd.o
 125 obj-$(CONFIG_SD) += sd.o
 126 obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
 127 obj-y += bt-hci-csr.o
 128 obj-y += buffered_file.o migration.o migration-tcp.o qemu-sockets.o
 129 obj-y += qemu-char.o aio.o net-checksum.o savevm.o
 130 obj-y += msmouse.o ps2.o
 131 obj-y += qdev.o qdev-properties.o
 132 obj-y += qint.o qstring.o qdict.o qlist.o qemu-config.o
 133
 134 obj-$(CONFIG_BRLAPI) += baum.o
 135 obj-$(CONFIG_WIN32) += tap-win32.o
 136 obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
 137
 138 audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
 139
 140 audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
 141 audio-obj-$(CONFIG_SDL) += sdlaudio.o
 142 audio-obj-$(CONFIG_OSS) += ossaudio.o
 143 audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
 144 audio-obj-$(CONFIG_ALSA) += alsaaudio.o
 145 audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
 146 audio-obj-$(CONFIG_FMOD) += fmodaudio.o
 147 audio-obj-$(CONFIG_ESD) += esdaudio.o
 148 audio-obj-$(CONFIG_PA) += paaudio.o
 149 audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o
 150 audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
 151 audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
 152 audio-obj-y += wavcapture.o
 153 obj-y += $(addprefix audio/, $(audio-obj-y))
 154
 155 obj-y += keymaps.o
 156 obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
 157 obj-$(CONFIG_CURSES) += curses.o
 158 obj-y += vnc.o acl.o d3des.o
 159 obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
 160 obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
 161 obj-$(CONFIG_COCOA) += cocoa.o
 162 obj-$(CONFIG_IOTHREAD) += qemu-thread.o
 163
 164 slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
 165 slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
 166 slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
 167 obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
 168
 169 # xen backend driver support
 170 obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o
 171 obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o
 172
 173 QEMU_CFLAGS+=$(CURL_CFLAGS)
 174
 175 cocoa.o: cocoa.m
 176
 177 keymaps.o: keymaps.c keymaps.h
 178
 179 sdl_zoom.o: sdl_zoom.c sdl_zoom.h sdl_zoom_template.h
 180
 181 sdl.o: sdl.c keymaps.h sdl_keysym.h sdl_zoom.h
 182
 183 sdl.o audio/sdlaudio.o sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
 184
 185 acl.o: acl.h acl.c
 186
 187 vnc.h: vnc-tls.h vnc-auth-vencrypt.h vnc-auth-sasl.h keymaps.h
 188
 189 vnc.o: vnc.c vnc.h vnc_keysym.h vnchextile.h d3des.c d3des.h acl.h
 190
 191 vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
 192
 193 vnc-tls.o: vnc-tls.c vnc.h
 194
 195 vnc-auth-vencrypt.o: vnc-auth-vencrypt.c vnc.h
 196
 197 vnc-auth-sasl.o: vnc-auth-sasl.c vnc.h
 198
 199 curses.o: curses.c keymaps.h curses_keys.h
 200
 201 bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
 202
 203 libqemu_common.a: $(obj-y)
 204
 205 ######################################################################
 206
 207 qemu-img.o: qemu-img-cmds.h
 208
 209 qemu-img$(EXESUF): qemu-img.o qemu-tool.o $(block-obj-y)
 210
 211 qemu-nbd$(EXESUF):  qemu-nbd.o qemu-tool.o $(block-obj-y)
 212
 213 qemu-io$(EXESUF):  qemu-io.o qemu-tool.o cmd.o $(block-obj-y)
 214
 215 qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
 216         $(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $@")
 217
 218 check-qint: check-qint.o qint.o qemu-malloc.o
 219 check-qstring: check-qstring.o qstring.o qemu-malloc.o
 220 check-qdict: check-qdict.o qdict.o qint.o qstring.o qemu-malloc.o
 221 check-qlist: check-qlist.o qlist.o qint.o qemu-malloc.o
 222
 223 clean:
 224 # avoid old build problems by removing potentially incorrect old files
 225         rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
 226         rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
 227         rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d
 228         rm -f qemu-img-cmds.h
 229         $(MAKE) -C tests clean
 230         for d in $(ALL_SUBDIRS) libhw32 libhw64 libuser; do \
 231         $(MAKE) -C $$d $@ || exit 1 ; \
 232         done
 233
 234 distclean: clean
 235         rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi
 236         rm -f config-all-devices.mak config-all-devices.h*
 237         rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
 238         for d in $(TARGET_DIRS) libhw32 libhw64 libuser; do \
 239         rm -rf $$d || exit 1 ; \
 240         done
 241
 242 KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  modifiers  no  pt-br  sv \
 243 ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
 244 common  de-ch  es     fo  fr-ca  hu     ja  mk  nl-be      pt  sl     tr
 245
 246 ifdef INSTALL_BLOBS
 247 BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin ppc_rom.bin \
 248 video.x openbios-sparc32 openbios-sparc64 openbios-ppc \
 249 pxe-ne2k_pci.bin pxe-rtl8139.bin pxe-pcnet.bin pxe-e1000.bin \
 250 bamboo.dtb petalogix-s3adsp1800.dtb \
 251 multiboot.bin
 252 else
 253 BLOBS=
 254 endif
 255
 256 install-doc: $(DOCS)
 257         $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
 258         $(INSTALL_DATA) qemu-doc.html  qemu-tech.html "$(DESTDIR)$(docdir)"
 259 ifdef CONFIG_POSIX
 260         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
 261         $(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
 262         $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
 263         $(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
 264 endif
 265
 266 install: all $(if $(BUILD_DOCS),install-doc)
 267         $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
 268 ifneq ($(TOOLS),)
 269         $(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
 270 endif
 271 ifneq ($(BLOBS),)
 272         $(INSTALL_DIR) "$(DESTDIR)$(datadir)"
 273         set -e; for x in $(BLOBS); do \
 274                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
 275         done
 276 endif
 277         $(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
 278         set -e; for x in $(KEYMAPS); do \
 279                 $(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
 280         done
 281         for d in $(TARGET_DIRS); do \
 282         $(MAKE) -C $$d $@ || exit 1 ; \
 283         done
 284
 285 # various test targets
 286 test speed: all
 287         $(MAKE) -C tests $@
 288
 289 .PHONY: TAGS
 290 TAGS:
 291         find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
 292
 293 cscope:
 294         rm -f ./cscope.*
 295         find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files
 296         cscope -b
 297
 298 # documentation
 299 %.html: %.texi
 300         $(call quiet-command,texi2html -I=. -monolithic -number $<,"  GEN   $@")
 301
 302 %.info: %.texi
 303         $(call quiet-command,makeinfo -I . $< -o $@,"  GEN   $@")
 304
 305 %.dvi: %.texi
 306         $(call quiet-command,texi2dvi -I . $<,"  GEN   $@")
 307
 308 qemu-options.texi: $(SRC_PATH)/qemu-options.hx
 309         $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
 310
 311 qemu-monitor.texi: $(SRC_PATH)/qemu-monitor.hx
 312         $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
 313
 314 qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
 315         $(call quiet-command,sh $(SRC_PATH)/hxtool -t < $< > $@,"  GEN   $@")
 316
 317 qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
 318         $(call quiet-command, \
 319           perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu.pod && \
 320           pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
 321           "  GEN   $@")
 322
 323 qemu-img.1: qemu-img.texi qemu-img-cmds.texi
 324         $(call quiet-command, \
 325           perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-img.pod && \
 326           pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
 327           "  GEN   $@")
 328
 329 qemu-nbd.8: qemu-nbd.texi
 330         $(call quiet-command, \
 331           perl -Ww -- $(SRC_PATH)/texi2pod.pl $< qemu-nbd.pod && \
 332           pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
 333           "  GEN   $@")
 334
 335 info: qemu-doc.info qemu-tech.info
 336
 337 dvi: qemu-doc.dvi qemu-tech.dvi
 338
 339 html: qemu-doc.html qemu-tech.html
 340
 341 qemu-doc.dvi qemu-doc.html qemu-doc.info: qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-monitor.texi qemu-img-cmds.texi
 342
 343 VERSION ?= $(shell cat VERSION)
 344 FILE = qemu-$(VERSION)
 345
 346 # tar release (use 'make -k tar' on a checkouted tree)
 347 tar:
 348         rm -rf /tmp/$(FILE)
 349         cp -r . /tmp/$(FILE)
 350         cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
 351         rm -rf /tmp/$(FILE)
 352
 353 # generate a binary distribution
 354 tarbin:
 355         cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
 356         $(bindir)/qemu \
 357         $(bindir)/qemu-system-x86_64 \
 358         $(bindir)/qemu-system-arm \
 359         $(bindir)/qemu-system-cris \
 360         $(bindir)/qemu-system-m68k \
 361         $(bindir)/qemu-system-microblaze \
 362         $(bindir)/qemu-system-mips \
 363         $(bindir)/qemu-system-mipsel \
 364         $(bindir)/qemu-system-mips64 \
 365         $(bindir)/qemu-system-mips64el \
 366         $(bindir)/qemu-system-ppc \
 367         $(bindir)/qemu-system-ppcemb \
 368         $(bindir)/qemu-system-ppc64 \
 369         $(bindir)/qemu-system-sh4 \
 370         $(bindir)/qemu-system-sh4eb \
 371         $(bindir)/qemu-system-sparc \
 372         $(bindir)/qemu-i386 \
 373         $(bindir)/qemu-x86_64 \
 374         $(bindir)/qemu-alpha \
 375         $(bindir)/qemu-arm \
 376         $(bindir)/qemu-armeb \
 377         $(bindir)/qemu-cris \
 378         $(bindir)/qemu-m68k \
 379         $(bindir)/qemu-microblaze \
 380         $(bindir)/qemu-mips \
 381         $(bindir)/qemu-mipsel \
 382         $(bindir)/qemu-ppc \
 383         $(bindir)/qemu-ppc64 \
 384         $(bindir)/qemu-ppc64abi32 \
 385         $(bindir)/qemu-sh4 \
 386         $(bindir)/qemu-sh4eb \
 387         $(bindir)/qemu-sparc \
 388         $(bindir)/qemu-sparc64 \
 389         $(bindir)/qemu-sparc32plus \
 390         $(bindir)/qemu-img \
 391         $(bindir)/qemu-nbd \
 392         $(datadir)/bios.bin \
 393         $(datadir)/vgabios.bin \
 394         $(datadir)/vgabios-cirrus.bin \
 395         $(datadir)/ppc_rom.bin \
 396         $(datadir)/video.x \
 397         $(datadir)/openbios-sparc32 \
 398         $(datadir)/openbios-sparc64 \
 399         $(datadir)/openbios-ppc \
 400         $(datadir)/pxe-ne2k_pci.bin \
 401         $(datadir)/pxe-rtl8139.bin \
 402         $(datadir)/pxe-pcnet.bin \
 403         $(datadir)/pxe-e1000.bin \
 404         $(docdir)/qemu-doc.html \
 405         $(docdir)/qemu-tech.html \
 406         $(mandir)/man1/qemu.1 \
 407         $(mandir)/man1/qemu-img.1 \
 408         $(mandir)/man8/qemu-nbd.8
 409
 410 # Include automatically generated dependency files
 411 -include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d)