eepro100: Clean code which sets the PCI device id
[armpft.git] / hw / i2c.c
blob547377213b409736d7b9012a5280dae672178855
1 /*
2 * QEMU I2C bus interface.
4 * Copyright (c) 2007 CodeSourcery.
5 * Written by Paul Brook
7 * This code is licenced under the LGPL.
8 */
10 #include "i2c.h"
12 struct i2c_bus
14 BusState qbus;
15 i2c_slave *current_dev;
16 i2c_slave *dev;
17 int saved_address;
20 static struct BusInfo i2c_bus_info = {
21 .name = "I2C",
22 .size = sizeof(i2c_bus),
23 .props = (Property[]) {
24 DEFINE_PROP_UINT32("address", struct i2c_slave, address, 0),
25 DEFINE_PROP_END_OF_LIST(),
29 static void i2c_bus_save(QEMUFile *f, void *opaque)
31 i2c_bus *bus = (i2c_bus *)opaque;
33 qemu_put_byte(f, bus->current_dev ? bus->current_dev->address : -1);
36 static int i2c_bus_load(QEMUFile *f, void *opaque, int version_id)
38 i2c_bus *bus = (i2c_bus *)opaque;
40 if (version_id != 1)
41 return -EINVAL;
43 /* The bus is loaded before attached devices, so load and save the
44 current device id. Devices will check themselves as loaded. */
45 bus->saved_address = (int8_t) qemu_get_byte(f);
46 bus->current_dev = NULL;
48 return 0;
51 /* Create a new I2C bus. */
52 i2c_bus *i2c_init_bus(DeviceState *parent, const char *name)
54 i2c_bus *bus;
56 bus = FROM_QBUS(i2c_bus, qbus_create(&i2c_bus_info, parent, name));
57 register_savevm("i2c_bus", -1, 1, i2c_bus_save, i2c_bus_load, bus);
58 return bus;
61 void i2c_set_slave_address(i2c_slave *dev, int address)
63 dev->address = address;
66 /* Return nonzero if bus is busy. */
67 int i2c_bus_busy(i2c_bus *bus)
69 return bus->current_dev != NULL;
72 /* Returns non-zero if the address is not valid. */
73 /* TODO: Make this handle multiple masters. */
74 int i2c_start_transfer(i2c_bus *bus, int address, int recv)
76 DeviceState *qdev;
77 i2c_slave *slave = NULL;
79 LIST_FOREACH(qdev, &bus->qbus.children, sibling) {
80 slave = I2C_SLAVE_FROM_QDEV(qdev);
81 if (slave->address == address)
82 break;
85 if (!slave)
86 return 1;
88 /* If the bus is already busy, assume this is a repeated
89 start condition. */
90 bus->current_dev = slave;
91 slave->info->event(slave, recv ? I2C_START_RECV : I2C_START_SEND);
92 return 0;
95 void i2c_end_transfer(i2c_bus *bus)
97 i2c_slave *dev = bus->current_dev;
99 if (!dev)
100 return;
102 dev->info->event(dev, I2C_FINISH);
104 bus->current_dev = NULL;
107 int i2c_send(i2c_bus *bus, uint8_t data)
109 i2c_slave *dev = bus->current_dev;
111 if (!dev)
112 return -1;
114 return dev->info->send(dev, data);
117 int i2c_recv(i2c_bus *bus)
119 i2c_slave *dev = bus->current_dev;
121 if (!dev)
122 return -1;
124 return dev->info->recv(dev);
127 void i2c_nack(i2c_bus *bus)
129 i2c_slave *dev = bus->current_dev;
131 if (!dev)
132 return;
134 dev->info->event(dev, I2C_NACK);
137 void i2c_slave_save(QEMUFile *f, i2c_slave *dev)
139 qemu_put_byte(f, dev->address);
142 void i2c_slave_load(QEMUFile *f, i2c_slave *dev)
144 i2c_bus *bus;
145 bus = FROM_QBUS(i2c_bus, qdev_get_parent_bus(&dev->qdev));
146 dev->address = qemu_get_byte(f);
147 if (bus->saved_address == dev->address) {
148 bus->current_dev = dev;
152 static int i2c_slave_qdev_init(DeviceState *dev, DeviceInfo *base)
154 I2CSlaveInfo *info = container_of(base, I2CSlaveInfo, qdev);
155 i2c_slave *s = I2C_SLAVE_FROM_QDEV(dev);
157 s->info = info;
159 return info->init(s);
162 void i2c_register_slave(I2CSlaveInfo *info)
164 assert(info->qdev.size >= sizeof(i2c_slave));
165 info->qdev.init = i2c_slave_qdev_init;
166 info->qdev.bus_info = &i2c_bus_info;
167 qdev_register(&info->qdev);
170 DeviceState *i2c_create_slave(i2c_bus *bus, const char *name, int addr)
172 DeviceState *dev;
174 dev = qdev_create(&bus->qbus, name);
175 qdev_prop_set_uint32(dev, "address", addr);
176 qdev_init(dev);
177 return dev;