3 Copyright (C) 1999-2002 Paul Davis
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29 #include <boost/shared_ptr.hpp>
31 #include <glibmm/main.h>
33 #include "midi++/mmc.h"
34 #include "midi++/port.h"
35 #include "midi++/manager.h"
36 #include "pbd/error.h"
37 #include "pbd/pthread_utils.h"
39 #include "ardour/configuration.h"
40 #include "ardour/debug.h"
41 #include "ardour/audioengine.h"
42 #include "ardour/session.h"
43 #include "ardour/audio_track.h"
44 #include "ardour/midi_track.h"
45 #include "ardour/midi_ui.h"
46 #include "ardour/audio_diskstream.h"
47 #include "ardour/slave.h"
48 #include "ardour/cycles.h"
49 #include "ardour/timecode.h"
54 using namespace ARDOUR
;
63 boost::shared_ptr
<RouteList
> r
= routes
.reader ();
65 for (RouteList::iterator i
= r
->begin(); i
!= r
->end(); ++i
) {
66 MidiTrack
*track
= dynamic_cast<MidiTrack
*>((*i
).get());
75 Session::setup_midi_control ()
77 outbound_mtc_timecode_frame
= 0;
78 next_quarter_frame_to_send
= 0;
80 /* Set up the qtr frame message */
93 Session::spp_start (Parser
&, nframes_t
/*timestamp*/)
95 if (Config
->get_mmc_control() && (!config
.get_external_sync() || config
.get_sync_source() != JACK
)) {
96 request_transport_speed (1.0);
101 Session::spp_continue (Parser
& ignored
, nframes_t timestamp
)
103 spp_start (ignored
, timestamp
);
107 Session::spp_stop (Parser
&, nframes_t
/*timestamp*/)
109 if (Config
->get_mmc_control()) {
115 Session::mmc_deferred_play (MIDI::MachineControl
&/*mmc*/)
117 if (Config
->get_mmc_control() && (!config
.get_external_sync() || (config
.get_sync_source() != JACK
))) {
118 request_transport_speed (1.0);
123 Session::mmc_record_pause (MIDI::MachineControl
&/*mmc*/)
125 if (Config
->get_mmc_control()) {
126 maybe_enable_record();
131 Session::mmc_record_strobe (MIDI::MachineControl
&/*mmc*/)
133 if (!Config
->get_mmc_control()) {
137 /* record strobe does an implicit "Play" command */
139 if (_transport_speed
!= 1.0) {
141 /* start_transport() will move from Enabled->Recording, so we
142 don't need to do anything here except enable recording.
143 its not the same as maybe_enable_record() though, because
144 that *can* switch to Recording, which we do not want.
147 save_state ("", true);
148 g_atomic_int_set (&_record_status
, Enabled
);
149 RecordStateChanged (); /* EMIT SIGNAL */
151 request_transport_speed (1.0);
160 Session::mmc_record_exit (MIDI::MachineControl
&/*mmc*/)
162 if (Config
->get_mmc_control()) {
163 disable_record (false);
168 Session::mmc_stop (MIDI::MachineControl
&/*mmc*/)
170 if (Config
->get_mmc_control()) {
176 Session::mmc_pause (MIDI::MachineControl
&/*mmc*/)
178 if (Config
->get_mmc_control()) {
180 /* We support RECORD_PAUSE, so the spec says that
181 we must interpret PAUSE like RECORD_PAUSE if
185 if (actively_recording()) {
186 maybe_enable_record ();
193 static bool step_queued
= false;
196 Session::mmc_step (MIDI::MachineControl
&/*mmc*/, int steps
)
198 if (!Config
->get_mmc_control()) {
203 struct timeval diff
= { 0, 0 };
205 gettimeofday (&now
, 0);
207 timersub (&now
, &last_mmc_step
, &diff
);
209 gettimeofday (&now
, 0);
210 timersub (&now
, &last_mmc_step
, &diff
);
212 if (last_mmc_step
.tv_sec
!= 0 && (diff
.tv_usec
+ (diff
.tv_sec
* 1000000)) < _engine
.usecs_per_cycle()) {
216 double diff_secs
= diff
.tv_sec
+ (diff
.tv_usec
/ 1000000.0);
217 double cur_speed
= (((steps
* 0.5) * timecode_frames_per_second()) / diff_secs
) / timecode_frames_per_second();
219 if (_transport_speed
== 0 || cur_speed
* _transport_speed
< 0) {
220 /* change direction */
221 step_speed
= cur_speed
;
223 step_speed
= (0.6 * step_speed
) + (0.4 * cur_speed
);
229 cerr
<< "delta = " << diff_secs
230 << " ct = " << _transport_speed
231 << " steps = " << steps
232 << " new speed = " << cur_speed
233 << " speed = " << step_speed
237 request_transport_speed (step_speed
);
241 if (midi_control_ui
) {
242 RefPtr
<TimeoutSource
> tsrc
= TimeoutSource::create (100);
243 tsrc
->connect (sigc::mem_fun (*this, &Session::mmc_step_timeout
));
244 tsrc
->attach (midi_control_ui
->main_loop()->get_context());
251 Session::mmc_rewind (MIDI::MachineControl
&/*mmc*/)
253 if (Config
->get_mmc_control()) {
254 request_transport_speed(-8.0f
);
259 Session::mmc_fast_forward (MIDI::MachineControl
&/*mmc*/)
261 if (Config
->get_mmc_control()) {
262 request_transport_speed(8.0f
);
267 Session::mmc_locate (MIDI::MachineControl
&/*mmc*/, const MIDI::byte
* mmc_tc
)
269 if (!Config
->get_mmc_control()) {
273 nframes_t target_frame
;
274 Timecode::Time timecode
;
276 timecode
.hours
= mmc_tc
[0] & 0xf;
277 timecode
.minutes
= mmc_tc
[1];
278 timecode
.seconds
= mmc_tc
[2];
279 timecode
.frames
= mmc_tc
[3];
280 timecode
.rate
= timecode_frames_per_second();
281 timecode
.drop
= timecode_drop_frames();
283 // Also takes timecode offset into account:
284 timecode_to_sample( timecode
, target_frame
, true /* use_offset */, false /* use_subframes */ );
286 if (target_frame
> max_frames
) {
287 target_frame
= max_frames
;
290 /* Some (all?) MTC/MMC devices do not send a full MTC frame
291 at the end of a locate, instead sending only an MMC
292 locate command. This causes the current position
293 of an MTC slave to become out of date. Catch this.
296 MTC_Slave
* mtcs
= dynamic_cast<MTC_Slave
*> (_slave
);
299 // cerr << "Locate *with* MTC slave\n";
300 mtcs
->handle_locate (mmc_tc
);
302 // cerr << "Locate without MTC slave\n";
303 request_locate (target_frame
, false);
308 Session::mmc_shuttle (MIDI::MachineControl
&/*mmc*/, float speed
, bool forw
)
310 if (!Config
->get_mmc_control()) {
314 if (Config
->get_shuttle_speed_threshold() >= 0 && speed
> Config
->get_shuttle_speed_threshold()) {
315 speed
*= Config
->get_shuttle_speed_factor();
319 request_transport_speed (speed
);
321 request_transport_speed (-speed
);
326 Session::mmc_record_enable (MIDI::MachineControl
&mmc
, size_t trk
, bool enabled
)
328 if (Config
->get_mmc_control()) {
330 RouteList::iterator i
;
331 boost::shared_ptr
<RouteList
> r
= routes
.reader();
333 for (i
= r
->begin(); i
!= r
->end(); ++i
) {
336 if ((at
= dynamic_cast<AudioTrack
*>((*i
).get())) != 0) {
337 if (trk
== at
->remote_control_id()) {
338 at
->set_record_enable (enabled
, &mmc
);
346 /** Send MTC Full Frame message (complete Timecode time) for the start of this cycle.
347 * This resets the MTC code, the next quarter frame message that is sent will be
348 * the first one with the beginning of this cycle as the new start point.
349 * @param t time to send.
352 Session::send_full_time_code (nframes64_t
const t
)
354 /* This function could easily send at a given frame offset, but would
355 * that be useful? Does ardour do sub-block accurate locating? [DR] */
358 Timecode::Time timecode
;
360 _send_timecode_update
= false;
362 if (!session_send_mtc
|| _slave
) {
366 // Get timecode time for the given time
367 sample_to_timecode (t
, timecode
, true /* use_offset */, false /* no subframes */);
369 transmitting_timecode_time
= timecode
;
370 outbound_mtc_timecode_frame
= t
;
372 // I don't understand this bit yet.. [DR]
373 if (((mtc_timecode_bits
>> 5) != MIDI::MTC_25_FPS
) && (transmitting_timecode_time
.frames
% 2)) {
374 // start MTC quarter frame transmission on an even frame
375 Timecode::increment (transmitting_timecode_time
, config
.get_subframes_per_frame());
376 outbound_mtc_timecode_frame
+= (nframes_t
) _frames_per_timecode_frame
;
379 // Compensate for audio latency
380 outbound_mtc_timecode_frame
+= _worst_output_latency
;
381 next_quarter_frame_to_send
= 0;
383 // Sync slave to the same Timecode time as we are on
391 msg
[5] = mtc_timecode_bits
| timecode
.hours
;
392 msg
[6] = timecode
.minutes
;
393 msg
[7] = timecode
.seconds
;
394 msg
[8] = timecode
.frames
;
396 // Send message at offset 0, sent time is for the start of this cycle
397 if (MIDI::Manager::instance()->mtc_output_port()->midimsg (msg
, sizeof (msg
), 0)) {
398 error
<< _("Session: could not send full MIDI time code") << endmsg
;
405 /** Send MTC (quarter-frame) messages for this cycle.
406 * Must be called exactly once per cycle from the audio thread. Realtime safe.
407 * This function assumes the state of full Timecode is sane, eg. the slave is
408 * expecting quarter frame messages and has the right frame of reference (any
409 * full MTC Timecode time messages that needed to be sent should have been sent
410 * earlier already this cycle by send_full_time_code)
413 Session::send_midi_time_code_for_cycle(nframes_t nframes
)
415 if (_slave
|| !session_send_mtc
|| transmitting_timecode_time
.negative
|| (next_quarter_frame_to_send
< 0)) {
416 // cerr << "(MTC) Not sending MTC\n";
420 assert (next_quarter_frame_to_send
>= 0);
421 assert (next_quarter_frame_to_send
<= 7);
423 /* Duration of one quarter frame */
424 nframes_t quarter_frame_duration
= ((nframes_t
) _frames_per_timecode_frame
) >> 2;
426 DEBUG_TRACE (DEBUG::MTC
, string_compose ("TF %1 SF %2 NQ %3 FD %4\n", _transport_frame
, outbound_mtc_timecode_frame
,
427 next_quarter_frame_to_send
, quarter_frame_duration
));
429 assert((outbound_mtc_timecode_frame
+ (next_quarter_frame_to_send
* quarter_frame_duration
))
430 >= _transport_frame
);
433 // Send quarter frames for this cycle
434 while (_transport_frame
+ nframes
> (outbound_mtc_timecode_frame
+
435 (next_quarter_frame_to_send
* quarter_frame_duration
))) {
437 DEBUG_TRACE (DEBUG::MTC
, string_compose ("next frame to send: %1\n", next_quarter_frame_to_send
));
439 switch (next_quarter_frame_to_send
) {
441 mtc_msg
[1] = 0x00 | (transmitting_timecode_time
.frames
& 0xf);
444 mtc_msg
[1] = 0x10 | ((transmitting_timecode_time
.frames
& 0xf0) >> 4);
447 mtc_msg
[1] = 0x20 | (transmitting_timecode_time
.seconds
& 0xf);
450 mtc_msg
[1] = 0x30 | ((transmitting_timecode_time
.seconds
& 0xf0) >> 4);
453 mtc_msg
[1] = 0x40 | (transmitting_timecode_time
.minutes
& 0xf);
456 mtc_msg
[1] = 0x50 | ((transmitting_timecode_time
.minutes
& 0xf0) >> 4);
459 mtc_msg
[1] = 0x60 | ((mtc_timecode_bits
|transmitting_timecode_time
.hours
) & 0xf);
462 mtc_msg
[1] = 0x70 | (((mtc_timecode_bits
|transmitting_timecode_time
.hours
) & 0xf0) >> 4);
466 const nframes_t msg_time
= (outbound_mtc_timecode_frame
467 + (quarter_frame_duration
* next_quarter_frame_to_send
));
469 // This message must fall within this block or something is broken
470 assert(msg_time
>= _transport_frame
);
471 assert(msg_time
< _transport_frame
+ nframes
);
473 nframes_t out_stamp
= msg_time
- _transport_frame
;
474 assert(out_stamp
< nframes
);
476 if (MIDI::Manager::instance()->mtc_output_port()->midimsg (mtc_msg
, 2, out_stamp
)) {
477 error
<< string_compose(_("Session: cannot send quarter-frame MTC message (%1)"), strerror (errno
))
484 DEBUG_STR_APPEND(foo
,"sending ");
485 DEBUG_STR_APPEND(foo
, transmitting_timecode_time
);
486 DEBUG_TRACE (DEBUG::MTC
, string_compose ("%1 qfm = %2, stamp = %3\n", DEBUG_STR(foo
).str(), next_quarter_frame_to_send
,
490 // Increment quarter frame counter
491 next_quarter_frame_to_send
++;
493 if (next_quarter_frame_to_send
>= 8) {
494 // Wrap quarter frame counter
495 next_quarter_frame_to_send
= 0;
496 // Increment timecode time twice
497 Timecode::increment( transmitting_timecode_time
, config
.get_subframes_per_frame() );
498 Timecode::increment( transmitting_timecode_time
, config
.get_subframes_per_frame() );
499 // Re-calculate timing of first quarter frame
500 //timecode_to_sample( transmitting_timecode_time, outbound_mtc_timecode_frame, true /* use_offset */, false );
501 outbound_mtc_timecode_frame
+= 8 * quarter_frame_duration
;
508 /***********************************************************************
510 **********************************************************************/
514 Session::mmc_step_timeout ()
519 gettimeofday (&now
, 0);
521 timersub (&now
, &last_mmc_step
, &diff
);
522 diff_usecs
= diff
.tv_sec
* 1000000 + diff
.tv_usec
;
524 if (diff_usecs
> 1000000.0 || fabs (_transport_speed
) < 0.0000001) {
525 /* too long or too slow, stop transport */
526 request_transport_speed (0.0);
531 if (diff_usecs
< 250000.0) {
532 /* too short, just keep going */
538 request_transport_speed (_transport_speed
* 0.75);
542 /*---------------------------------------------------------------------------
544 ---------------------------------------------------------------------------*/
547 Session::start_midi_thread ()
549 midi_control_ui
= new MidiControlUI (*this);
550 midi_control_ui
->run ();
555 Session::terminate_midi_thread ()
557 if (midi_control_ui
) {
558 midi_control_ui
->quit ();