t/test-lib.sh

   1 # Test framework for git.  See t/README for usage.
   2 #
   3 # Copyright (c) 2005 Junio C Hamano
   4 #
   5 # This program is free software: you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation, either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program.  If not, see http://www.gnu.org/licenses/ .
  17
  18 # Keep the original TERM for say_color
  19 ORIGINAL_TERM=$TERM
  20
  21 # Test the binaries we have just built.  The tests are kept in
  22 # t/ subdirectory and are run in 'trash directory' subdirectory.
  23 if test -z "$TEST_DIRECTORY"
  24 then
  25         # We allow tests to override this, in case they want to run tests
  26         # outside of t/, e.g. for running tests on the test library
  27         # itself.
  28         TEST_DIRECTORY=$(pwd)
  29 else
  30         # ensure that TEST_DIRECTORY is an absolute path so that it
  31         # is valid even if the current working directory is changed
  32         TEST_DIRECTORY=$(cd "$TEST_DIRECTORY" && pwd) || exit 1
  33 fi
  34 if test -z "$TEST_OUTPUT_DIRECTORY"
  35 then
  36         # Similarly, override this to store the test-results subdir
  37         # elsewhere
  38         TEST_OUTPUT_DIRECTORY=$TEST_DIRECTORY
  39 fi
  40 GIT_BUILD_DIR="$TEST_DIRECTORY"/..
  41
  42 ################################################################
  43 # It appears that people try to run tests without building...
  44 "$GIT_BUILD_DIR/git" >/dev/null
  45 if test $? != 1
  46 then
  47         echo >&2 'error: you do not seem to have built git yet.'
  48         exit 1
  49 fi
  50
  51 . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS
  52 export PERL_PATH SHELL_PATH
  53
  54 # if --tee was passed, write the output not only to the terminal, but
  55 # additionally to the file test-results/$BASENAME.out, too.
  56 case "$GIT_TEST_TEE_STARTED, $* " in
  57 done,*)
  58         # do not redirect again
  59         ;;
  60 *' --tee '*|*' --va'*)
  61         mkdir -p "$TEST_OUTPUT_DIRECTORY/test-results"
  62         BASE="$TEST_OUTPUT_DIRECTORY/test-results/$(basename "$0" .sh)"
  63         (GIT_TEST_TEE_STARTED=done ${SHELL_PATH} "$0" "$@" 2>&1;
  64          echo $? > $BASE.exit) | tee $BASE.out
  65         test "$(cat $BASE.exit)" = 0
  66         exit
  67         ;;
  68 esac
  69
  70 # For repeatability, reset the environment to known value.
  71 LANG=C
  72 LC_ALL=C
  73 PAGER=cat
  74 TZ=UTC
  75 TERM=dumb
  76 export LANG LC_ALL PAGER TERM TZ
  77 EDITOR=:
  78 # A call to "unset" with no arguments causes at least Solaris 10
  79 # /usr/xpg4/bin/sh and /bin/ksh to bail out.  So keep the unsets
  80 # deriving from the command substitution clustered with the other
  81 # ones.
  82 unset VISUAL EMAIL LANGUAGE COLUMNS $("$PERL_PATH" -e '
  83         my @env = keys %ENV;
  84         my $ok = join("|", qw(
  85                 TRACE
  86                 DEBUG
  87                 USE_LOOKUP
  88                 TEST
  89                 .*_TEST
  90                 PROVE
  91                 VALGRIND
  92                 UNZIP
  93                 PERF_
  94                 CURL_VERBOSE
  95         ));
  96         my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env);
  97         print join("\n", @vars);
  98 ')
  99 unset XDG_CONFIG_HOME
 100 unset GITPERLLIB
 101 GIT_AUTHOR_EMAIL=author@example.com
 102 GIT_AUTHOR_NAME='A U Thor'
 103 GIT_COMMITTER_EMAIL=committer@example.com
 104 GIT_COMMITTER_NAME='C O Mitter'
 105 GIT_MERGE_VERBOSITY=5
 106 GIT_MERGE_AUTOEDIT=no
 107 export GIT_MERGE_VERBOSITY GIT_MERGE_AUTOEDIT
 108 export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME
 109 export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME
 110 export EDITOR
 111
 112 # Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output
 113 GIT_TRACE_BARE=1
 114 export GIT_TRACE_BARE
 115
 116 if test -n "${TEST_GIT_INDEX_VERSION:+isset}"
 117 then
 118         GIT_INDEX_VERSION="$TEST_GIT_INDEX_VERSION"
 119         export GIT_INDEX_VERSION
 120 fi
 121
 122 # Add libc MALLOC and MALLOC_PERTURB test
 123 # only if we are not executing the test with valgrind
 124 if expr " $GIT_TEST_OPTS " : ".* --valgrind " >/dev/null ||
 125    test -n "$TEST_NO_MALLOC_CHECK"
 126 then
 127         setup_malloc_check () {
 128                 : nothing
 129         }
 130         teardown_malloc_check () {
 131                 : nothing
 132         }
 133 else
 134         setup_malloc_check () {
 135                 MALLOC_CHECK_=3 MALLOC_PERTURB_=165
 136                 export MALLOC_CHECK_ MALLOC_PERTURB_
 137         }
 138         teardown_malloc_check () {
 139                 unset MALLOC_CHECK_ MALLOC_PERTURB_
 140         }
 141 fi
 142
 143 : ${ASAN_OPTIONS=detect_leaks=0}
 144 export ASAN_OPTIONS
 145
 146 # Protect ourselves from common misconfiguration to export
 147 # CDPATH into the environment
 148 unset CDPATH
 149
 150 unset GREP_OPTIONS
 151 unset UNZIP
 152
 153 case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in
 154 1|2|true)
 155         echo "* warning: Some tests will not work if GIT_TRACE" \
 156                 "is set as to trace on STDERR ! *"
 157         echo "* warning: Please set GIT_TRACE to something" \
 158                 "other than 1, 2 or true ! *"
 159         ;;
 160 esac
 161
 162 # Convenience
 163 #
 164 # A regexp to match 5 and 40 hexdigits
 165 _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
 166 _x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
 167
 168 # Zero SHA-1
 169 _z40=0000000000000000000000000000000000000000
 170
 171 # Line feed
 172 LF='
 173 '
 174
 175 # UTF-8 ZERO WIDTH NON-JOINER, which HFS+ ignores
 176 # when case-folding filenames
 177 u200c=$(printf '\342\200\214')
 178
 179 export _x05 _x40 _z40 LF u200c
 180
 181 # Each test should start with something like this, after copyright notices:
 182 #
 183 # test_description='Description of this test...
 184 # This test checks if command xyzzy does the right thing...
 185 # '
 186 # . ./test-lib.sh
 187 test "x$ORIGINAL_TERM" != "xdumb" && (
 188                 TERM=$ORIGINAL_TERM &&
 189                 export TERM &&
 190                 test -t 1 &&
 191                 tput bold >/dev/null 2>&1 &&
 192                 tput setaf 1 >/dev/null 2>&1 &&
 193                 tput sgr0 >/dev/null 2>&1
 194         ) &&
 195         color=t
 196
 197 while test "$#" -ne 0
 198 do
 199         case "$1" in
 200         -d|--d|--de|--deb|--debu|--debug)
 201                 debug=t; shift ;;
 202         -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
 203                 immediate=t; shift ;;
 204         -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
 205                 GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
 206         -r)
 207                 shift; test "$#" -ne 0 || {
 208                         echo 'error: -r requires an argument' >&2;
 209                         exit 1;
 210                 }
 211                 run_list=$1; shift ;;
 212         --run=*)
 213                 run_list=$(expr "z$1" : 'z[^=]*=\(.*\)'); shift ;;
 214         -h|--h|--he|--hel|--help)
 215                 help=t; shift ;;
 216         -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
 217                 verbose=t; shift ;;
 218         --verbose-only=*)
 219                 verbose_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
 220                 shift ;;
 221         -q|--q|--qu|--qui|--quie|--quiet)
 222                 # Ignore --quiet under a TAP::Harness. Saying how many tests
 223                 # passed without the ok/not ok details is always an error.
 224                 test -z "$HARNESS_ACTIVE" && quiet=t; shift ;;
 225         --with-dashes)
 226                 with_dashes=t; shift ;;
 227         --no-color)
 228                 color=; shift ;;
 229         --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
 230                 valgrind=memcheck
 231                 shift ;;
 232         --valgrind=*)
 233                 valgrind=$(expr "z$1" : 'z[^=]*=\(.*\)')
 234                 shift ;;
 235         --valgrind-only=*)
 236                 valgrind_only=$(expr "z$1" : 'z[^=]*=\(.*\)')
 237                 shift ;;
 238         --tee)
 239                 shift ;; # was handled already
 240         --root=*)
 241                 root=$(expr "z$1" : 'z[^=]*=\(.*\)')
 242                 shift ;;
 243         -x)
 244                 trace=t
 245                 verbose=t
 246                 shift ;;
 247         *)
 248                 echo "error: unknown test option '$1'" >&2; exit 1 ;;
 249         esac
 250 done
 251
 252 if test -n "$valgrind_only"
 253 then
 254         test -z "$valgrind" && valgrind=memcheck
 255         test -z "$verbose" && verbose_only="$valgrind_only"
 256 elif test -n "$valgrind"
 257 then
 258         verbose=t
 259 fi
 260
 261 if test -n "$color"
 262 then
 263         say_color () {
 264                 (
 265                 TERM=$ORIGINAL_TERM
 266                 export TERM
 267                 case "$1" in
 268                 error)
 269                         tput bold; tput setaf 1;; # bold red
 270                 skip)
 271                         tput setaf 4;; # blue
 272                 warn)
 273                         tput setaf 3;; # brown/yellow
 274                 pass)
 275                         tput setaf 2;; # green
 276                 info)
 277                         tput setaf 6;; # cyan
 278                 *)
 279                         test -n "$quiet" && return;;
 280                 esac
 281                 shift
 282                 printf "%s" "$*"
 283                 tput sgr0
 284                 echo
 285                 )
 286         }
 287 else
 288         say_color() {
 289                 test -z "$1" && test -n "$quiet" && return
 290                 shift
 291                 printf "%s\n" "$*"
 292         }
 293 fi
 294
 295 error () {
 296         say_color error "error: $*"
 297         GIT_EXIT_OK=t
 298         exit 1
 299 }
 300
 301 say () {
 302         say_color info "$*"
 303 }
 304
 305 test "${test_description}" != "" ||
 306 error "Test script did not set test_description."
 307
 308 if test "$help" = "t"
 309 then
 310         printf '%s\n' "$test_description"
 311         exit 0
 312 fi
 313
 314 exec 5>&1
 315 exec 6<&0
 316 if test "$verbose" = "t"
 317 then
 318         exec 4>&2 3>&1
 319 else
 320         exec 4>/dev/null 3>/dev/null
 321 fi
 322
 323 test_failure=0
 324 test_count=0
 325 test_fixed=0
 326 test_broken=0
 327 test_success=0
 328
 329 test_external_has_tap=0
 330
 331 die () {
 332         code=$?
 333         if test -n "$GIT_EXIT_OK"
 334         then
 335                 exit $code
 336         else
 337                 echo >&5 "FATAL: Unexpected exit with code $code"
 338                 exit 1
 339         fi
 340 }
 341
 342 GIT_EXIT_OK=
 343 trap 'die' EXIT
 344
 345 # The user-facing functions are loaded from a separate file so that
 346 # test_perf subshells can have them too
 347 . "$TEST_DIRECTORY/test-lib-functions.sh"
 348
 349 # You are not expected to call test_ok_ and test_failure_ directly, use
 350 # the test_expect_* functions instead.
 351
 352 test_ok_ () {
 353         test_success=$(($test_success + 1))
 354         say_color "" "ok $test_count - $@"
 355 }
 356
 357 test_failure_ () {
 358         test_failure=$(($test_failure + 1))
 359         say_color error "not ok $test_count - $1"
 360         shift
 361         printf '%s\n' "$*" | sed -e 's/^/#      /'
 362         test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
 363 }
 364
 365 test_known_broken_ok_ () {
 366         test_fixed=$(($test_fixed+1))
 367         say_color error "ok $test_count - $@ # TODO known breakage vanished"
 368 }
 369
 370 test_known_broken_failure_ () {
 371         test_broken=$(($test_broken+1))
 372         say_color warn "not ok $test_count - $@ # TODO known breakage"
 373 }
 374
 375 test_debug () {
 376         test "$debug" = "" || eval "$1"
 377 }
 378
 379 match_pattern_list () {
 380         arg="$1"
 381         shift
 382         test -z "$*" && return 1
 383         for pattern_
 384         do
 385                 case "$arg" in
 386                 $pattern_)
 387                         return 0
 388                 esac
 389         done
 390         return 1
 391 }
 392
 393 match_test_selector_list () {
 394         title="$1"
 395         shift
 396         arg="$1"
 397         shift
 398         test -z "$1" && return 0
 399
 400         # Both commas and whitespace are accepted as separators.
 401         OLDIFS=$IFS
 402         IFS='   ,'
 403         set -- $1
 404         IFS=$OLDIFS
 405
 406         # If the first selector is negative we include by default.
 407         include=
 408         case "$1" in
 409                 !*) include=t ;;
 410         esac
 411
 412         for selector
 413         do
 414                 orig_selector=$selector
 415
 416                 positive=t
 417                 case "$selector" in
 418                         !*)
 419                                 positive=
 420                                 selector=${selector##?}
 421                                 ;;
 422                 esac
 423
 424                 test -z "$selector" && continue
 425
 426                 case "$selector" in
 427                         *-*)
 428                                 if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null
 429                                 then
 430                                         echo "error: $title: invalid non-numeric in range" \
 431                                                 "start: '$orig_selector'" >&2
 432                                         exit 1
 433                                 fi
 434                                 if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null
 435                                 then
 436                                         echo "error: $title: invalid non-numeric in range" \
 437                                                 "end: '$orig_selector'" >&2
 438                                         exit 1
 439                                 fi
 440                                 ;;
 441                         *)
 442                                 if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null
 443                                 then
 444                                         echo "error: $title: invalid non-numeric in test" \
 445                                                 "selector: '$orig_selector'" >&2
 446                                         exit 1
 447                                 fi
 448                 esac
 449
 450                 # Short cut for "obvious" cases
 451                 test -z "$include" && test -z "$positive" && continue
 452                 test -n "$include" && test -n "$positive" && continue
 453
 454                 case "$selector" in
 455                         -*)
 456                                 if test $arg -le ${selector#-}
 457                                 then
 458                                         include=$positive
 459                                 fi
 460                                 ;;
 461                         *-)
 462                                 if test $arg -ge ${selector%-}
 463                                 then
 464                                         include=$positive
 465                                 fi
 466                                 ;;
 467                         *-*)
 468                                 if test ${selector%%-*} -le $arg \
 469                                         && test $arg -le ${selector#*-}
 470                                 then
 471                                         include=$positive
 472                                 fi
 473                                 ;;
 474                         *)
 475                                 if test $arg -eq $selector
 476                                 then
 477                                         include=$positive
 478                                 fi
 479                                 ;;
 480                 esac
 481         done
 482
 483         test -n "$include"
 484 }
 485
 486 maybe_teardown_verbose () {
 487         test -z "$verbose_only" && return
 488         exec 4>/dev/null 3>/dev/null
 489         verbose=
 490 }
 491
 492 last_verbose=t
 493 maybe_setup_verbose () {
 494         test -z "$verbose_only" && return
 495         if match_pattern_list $test_count $verbose_only
 496         then
 497                 exec 4>&2 3>&1
 498                 # Emit a delimiting blank line when going from
 499                 # non-verbose to verbose.  Within verbose mode the
 500                 # delimiter is printed by test_expect_*.  The choice
 501                 # of the initial $last_verbose is such that before
 502                 # test 1, we do not print it.
 503                 test -z "$last_verbose" && echo >&3 ""
 504                 verbose=t
 505         else
 506                 exec 4>/dev/null 3>/dev/null
 507                 verbose=
 508         fi
 509         last_verbose=$verbose
 510 }
 511
 512 maybe_teardown_valgrind () {
 513         test -z "$GIT_VALGRIND" && return
 514         GIT_VALGRIND_ENABLED=
 515 }
 516
 517 maybe_setup_valgrind () {
 518         test -z "$GIT_VALGRIND" && return
 519         if test -z "$valgrind_only"
 520         then
 521                 GIT_VALGRIND_ENABLED=t
 522                 return
 523         fi
 524         GIT_VALGRIND_ENABLED=
 525         if match_pattern_list $test_count $valgrind_only
 526         then
 527                 GIT_VALGRIND_ENABLED=t
 528         fi
 529 }
 530
 531 # This is a separate function because some tests use
 532 # "return" to end a test_expect_success block early
 533 # (and we want to make sure we run any cleanup like
 534 # "set +x").
 535 test_eval_inner_ () {
 536         # Do not add anything extra (including LF) after '$*'
 537         eval "
 538                 test \"$trace\" = t && set -x
 539                 $*"
 540 }
 541
 542 test_eval_ () {
 543         # We run this block with stderr redirected to avoid extra cruft
 544         # during a "-x" trace. Once in "set -x" mode, we cannot prevent
 545         # the shell from printing the "set +x" to turn it off (nor the saving
 546         # of $? before that). But we can make sure that the output goes to
 547         # /dev/null.
 548         #
 549         # The test itself is run with stderr put back to &4 (so either to
 550         # /dev/null, or to the original stderr if --verbose was used).
 551         {
 552                 test_eval_inner_ "$@" </dev/null >&3 2>&4
 553                 test_eval_ret_=$?
 554                 if test "$trace" = t
 555                 then
 556                         set +x
 557                         if test "$test_eval_ret_" != 0
 558                         then
 559                                 say_color error >&4 "error: last command exited with \$?=$test_eval_ret_"
 560                         fi
 561                 fi
 562         } 2>/dev/null
 563         return $test_eval_ret_
 564 }
 565
 566 test_run_ () {
 567         test_cleanup=:
 568         expecting_failure=$2
 569         setup_malloc_check
 570         test_eval_ "$1"
 571         eval_ret=$?
 572         teardown_malloc_check
 573
 574         if test -z "$immediate" || test $eval_ret = 0 ||
 575            test -n "$expecting_failure" && test "$test_cleanup" != ":"
 576         then
 577                 setup_malloc_check
 578                 test_eval_ "$test_cleanup"
 579                 teardown_malloc_check
 580         fi
 581         if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"
 582         then
 583                 echo ""
 584         fi
 585         return "$eval_ret"
 586 }
 587
 588 test_start_ () {
 589         test_count=$(($test_count+1))
 590         maybe_setup_verbose
 591         maybe_setup_valgrind
 592 }
 593
 594 test_finish_ () {
 595         echo >&3 ""
 596         maybe_teardown_valgrind
 597         maybe_teardown_verbose
 598 }
 599
 600 test_skip () {
 601         to_skip=
 602         skipped_reason=
 603         if match_pattern_list $this_test.$test_count $GIT_SKIP_TESTS
 604         then
 605                 to_skip=t
 606                 skipped_reason="GIT_SKIP_TESTS"
 607         fi
 608         if test -z "$to_skip" && test -n "$test_prereq" &&
 609            ! test_have_prereq "$test_prereq"
 610         then
 611                 to_skip=t
 612
 613                 of_prereq=
 614                 if test "$missing_prereq" != "$test_prereq"
 615                 then
 616                         of_prereq=" of $test_prereq"
 617                 fi
 618                 skipped_reason="missing $missing_prereq${of_prereq}"
 619         fi
 620         if test -z "$to_skip" && test -n "$run_list" &&
 621                 ! match_test_selector_list '--run' $test_count "$run_list"
 622         then
 623                 to_skip=t
 624                 skipped_reason="--run"
 625         fi
 626
 627         case "$to_skip" in
 628         t)
 629                 say_color skip >&3 "skipping test: $@"
 630                 say_color skip "ok $test_count # skip $1 ($skipped_reason)"
 631                 : true
 632                 ;;
 633         *)
 634                 false
 635                 ;;
 636         esac
 637 }
 638
 639 # stub; perf-lib overrides it
 640 test_at_end_hook_ () {
 641         :
 642 }
 643
 644 test_done () {
 645         GIT_EXIT_OK=t
 646
 647         if test -z "$HARNESS_ACTIVE"
 648         then
 649                 test_results_dir="$TEST_OUTPUT_DIRECTORY/test-results"
 650                 mkdir -p "$test_results_dir"
 651                 base=${0##*/}
 652                 test_results_path="$test_results_dir/${base%.sh}-$$.counts"
 653
 654                 cat >>"$test_results_path" <<-EOF
 655                 total $test_count
 656                 success $test_success
 657                 fixed $test_fixed
 658                 broken $test_broken
 659                 failed $test_failure
 660
 661                 EOF
 662         fi
 663
 664         if test "$test_fixed" != 0
 665         then
 666                 say_color error "# $test_fixed known breakage(s) vanished; please update test(s)"
 667         fi
 668         if test "$test_broken" != 0
 669         then
 670                 say_color warn "# still have $test_broken known breakage(s)"
 671         fi
 672         if test "$test_broken" != 0 || test "$test_fixed" != 0
 673         then
 674                 test_remaining=$(( $test_count - $test_broken - $test_fixed ))
 675                 msg="remaining $test_remaining test(s)"
 676         else
 677                 test_remaining=$test_count
 678                 msg="$test_count test(s)"
 679         fi
 680         case "$test_failure" in
 681         0)
 682                 # Maybe print SKIP message
 683                 if test -n "$skip_all" && test $test_count -gt 0
 684                 then
 685                         error "Can't use skip_all after running some tests"
 686                 fi
 687                 test -z "$skip_all" || skip_all=" # SKIP $skip_all"
 688
 689                 if test $test_external_has_tap -eq 0
 690                 then
 691                         if test $test_remaining -gt 0
 692                         then
 693                                 say_color pass "# passed all $msg"
 694                         fi
 695                         say "1..$test_count$skip_all"
 696                 fi
 697
 698                 test -d "$remove_trash" &&
 699                 cd "$(dirname "$remove_trash")" &&
 700                 rm -rf "$(basename "$remove_trash")"
 701
 702                 test_at_end_hook_
 703
 704                 exit 0 ;;
 705
 706         *)
 707                 if test $test_external_has_tap -eq 0
 708                 then
 709                         say_color error "# failed $test_failure among $msg"
 710                         say "1..$test_count"
 711                 fi
 712
 713                 exit 1 ;;
 714
 715         esac
 716 }
 717
 718 if test -n "$valgrind"
 719 then
 720         make_symlink () {
 721                 test -h "$2" &&
 722                 test "$1" = "$(readlink "$2")" || {
 723                         # be super paranoid
 724                         if mkdir "$2".lock
 725                         then
 726                                 rm -f "$2" &&
 727                                 ln -s "$1" "$2" &&
 728                                 rm -r "$2".lock
 729                         else
 730                                 while test -d "$2".lock
 731                                 do
 732                                         say "Waiting for lock on $2."
 733                                         sleep 1
 734                                 done
 735                         fi
 736                 }
 737         }
 738
 739         make_valgrind_symlink () {
 740                 # handle only executables, unless they are shell libraries that
 741                 # need to be in the exec-path.
 742                 test -x "$1" ||
 743                 test "# " = "$(head -c 2 <"$1")" ||
 744                 return;
 745
 746                 base=$(basename "$1")
 747                 symlink_target=$GIT_BUILD_DIR/$base
 748                 # do not override scripts
 749                 if test -x "$symlink_target" &&
 750                     test ! -d "$symlink_target" &&
 751                     test "#!" != "$(head -c 2 < "$symlink_target")"
 752                 then
 753                         symlink_target=../valgrind.sh
 754                 fi
 755                 case "$base" in
 756                 *.sh|*.perl)
 757                         symlink_target=../unprocessed-script
 758                 esac
 759                 # create the link, or replace it if it is out of date
 760                 make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
 761         }
 762
 763         # override all git executables in TEST_DIRECTORY/..
 764         GIT_VALGRIND=$TEST_DIRECTORY/valgrind
 765         mkdir -p "$GIT_VALGRIND"/bin
 766         for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/test-*
 767         do
 768                 make_valgrind_symlink $file
 769         done
 770         # special-case the mergetools loadables
 771         make_symlink "$GIT_BUILD_DIR"/mergetools "$GIT_VALGRIND/bin/mergetools"
 772         OLDIFS=$IFS
 773         IFS=:
 774         for path in $PATH
 775         do
 776                 ls "$path"/git-* 2> /dev/null |
 777                 while read file
 778                 do
 779                         make_valgrind_symlink "$file"
 780                 done
 781         done
 782         IFS=$OLDIFS
 783         PATH=$GIT_VALGRIND/bin:$PATH
 784         GIT_EXEC_PATH=$GIT_VALGRIND/bin
 785         export GIT_VALGRIND
 786         GIT_VALGRIND_MODE="$valgrind"
 787         export GIT_VALGRIND_MODE
 788         GIT_VALGRIND_ENABLED=t
 789         test -n "$valgrind_only" && GIT_VALGRIND_ENABLED=
 790         export GIT_VALGRIND_ENABLED
 791 elif test -n "$GIT_TEST_INSTALLED"
 792 then
 793         GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path)  ||
 794         error "Cannot run git from $GIT_TEST_INSTALLED."
 795         PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR:$PATH
 796         GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH}
 797 else # normal case, use ../bin-wrappers only unless $with_dashes:
 798         git_bin_dir="$GIT_BUILD_DIR/bin-wrappers"
 799         if ! test -x "$git_bin_dir/git"
 800         then
 801                 if test -z "$with_dashes"
 802                 then
 803                         say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH"
 804                 fi
 805                 with_dashes=t
 806         fi
 807         PATH="$git_bin_dir:$PATH"
 808         GIT_EXEC_PATH=$GIT_BUILD_DIR
 809         if test -n "$with_dashes"
 810         then
 811                 PATH="$GIT_BUILD_DIR:$PATH"
 812         fi
 813 fi
 814 GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt
 815 GIT_CONFIG_NOSYSTEM=1
 816 GIT_ATTR_NOSYSTEM=1
 817 export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM
 818
 819 if test -z "$GIT_TEST_CMP"
 820 then
 821         if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT"
 822         then
 823                 GIT_TEST_CMP="$DIFF -c"
 824         else
 825                 GIT_TEST_CMP="$DIFF -u"
 826         fi
 827 fi
 828
 829 GITPERLLIB="$GIT_BUILD_DIR"/perl/blib/lib:"$GIT_BUILD_DIR"/perl/blib/arch/auto/Git
 830 export GITPERLLIB
 831 test -d "$GIT_BUILD_DIR"/templates/blt || {
 832         error "You haven't built things yet, have you?"
 833 }
 834
 835 if ! test -x "$GIT_BUILD_DIR"/test-chmtime
 836 then
 837         echo >&2 'You need to build test-chmtime:'
 838         echo >&2 'Run "make test-chmtime" in the source (toplevel) directory'
 839         exit 1
 840 fi
 841
 842 # Test repository
 843 TRASH_DIRECTORY="trash directory.$(basename "$0" .sh)"
 844 test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY"
 845 case "$TRASH_DIRECTORY" in
 846 /*) ;; # absolute path is good
 847  *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;;
 848 esac
 849 test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY
 850 rm -fr "$TRASH_DIRECTORY" || {
 851         GIT_EXIT_OK=t
 852         echo >&5 "FATAL: Cannot prepare test area"
 853         exit 1
 854 }
 855
 856 HOME="$TRASH_DIRECTORY"
 857 GNUPGHOME="$HOME/gnupg-home-not-used"
 858 export HOME GNUPGHOME
 859
 860 if test -z "$TEST_NO_CREATE_REPO"
 861 then
 862         test_create_repo "$TRASH_DIRECTORY"
 863 else
 864         mkdir -p "$TRASH_DIRECTORY"
 865 fi
 866 # Use -P to resolve symlinks in our working directory so that the cwd
 867 # in subprocesses like git equals our $PWD (for pathname comparisons).
 868 cd -P "$TRASH_DIRECTORY" || exit 1
 869
 870 this_test=${0##*/}
 871 this_test=${this_test%%-*}
 872 if match_pattern_list "$this_test" $GIT_SKIP_TESTS
 873 then
 874         say_color info >&3 "skipping test $this_test altogether"
 875         skip_all="skip all tests in $this_test"
 876         test_done
 877 fi
 878
 879 # Provide an implementation of the 'yes' utility
 880 yes () {
 881         if test $# = 0
 882         then
 883                 y=y
 884         else
 885                 y="$*"
 886         fi
 887
 888         while echo "$y"
 889         do
 890                 :
 891         done
 892 }
 893
 894 # Fix some commands on Windows
 895 case $(uname -s) in
 896 *MINGW*)
 897         # Windows has its own (incompatible) sort and find
 898         sort () {
 899                 /usr/bin/sort "$@"
 900         }
 901         find () {
 902                 /usr/bin/find "$@"
 903         }
 904         sum () {
 905                 md5sum "$@"
 906         }
 907         # git sees Windows-style pwd
 908         pwd () {
 909                 builtin pwd -W
 910         }
 911         # no POSIX permissions
 912         # backslashes in pathspec are converted to '/'
 913         # exec does not inherit the PID
 914         test_set_prereq MINGW
 915         test_set_prereq NATIVE_CRLF
 916         test_set_prereq SED_STRIPS_CR
 917         test_set_prereq GREP_STRIPS_CR
 918         GIT_TEST_CMP=mingw_test_cmp
 919         ;;
 920 *CYGWIN*)
 921         test_set_prereq POSIXPERM
 922         test_set_prereq EXECKEEPSPID
 923         test_set_prereq CYGWIN
 924         test_set_prereq SED_STRIPS_CR
 925         test_set_prereq GREP_STRIPS_CR
 926         ;;
 927 *)
 928         test_set_prereq POSIXPERM
 929         test_set_prereq BSLASHPSPEC
 930         test_set_prereq EXECKEEPSPID
 931         ;;
 932 esac
 933
 934 ( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1
 935 test -z "$NO_PERL" && test_set_prereq PERL
 936 test -z "$NO_PYTHON" && test_set_prereq PYTHON
 937 test -n "$USE_LIBPCRE" && test_set_prereq LIBPCRE
 938 test -z "$NO_GETTEXT" && test_set_prereq GETTEXT
 939
 940 # Can we rely on git's output in the C locale?
 941 if test -n "$GETTEXT_POISON"
 942 then
 943         GIT_GETTEXT_POISON=YesPlease
 944         export GIT_GETTEXT_POISON
 945         test_set_prereq GETTEXT_POISON
 946 else
 947         test_set_prereq C_LOCALE_OUTPUT
 948 fi
 949
 950 # Use this instead of test_cmp to compare files that contain expected and
 951 # actual output from git commands that can be translated.  When running
 952 # under GETTEXT_POISON this pretends that the command produced expected
 953 # results.
 954 test_i18ncmp () {
 955         test -n "$GETTEXT_POISON" || test_cmp "$@"
 956 }
 957
 958 # Use this instead of "grep expected-string actual" to see if the
 959 # output from a git command that can be translated either contains an
 960 # expected string, or does not contain an unwanted one.  When running
 961 # under GETTEXT_POISON this pretends that the command produced expected
 962 # results.
 963 test_i18ngrep () {
 964         if test -n "$GETTEXT_POISON"
 965         then
 966             : # pretend success
 967         elif test "x!" = "x$1"
 968         then
 969                 shift
 970                 ! grep "$@"
 971         else
 972                 grep "$@"
 973         fi
 974 }
 975
 976 test_lazy_prereq PIPE '
 977         # test whether the filesystem supports FIFOs
 978         case $(uname -s) in
 979         CYGWIN*)
 980                 false
 981                 ;;
 982         *)
 983                 rm -f testfifo && mkfifo testfifo
 984                 ;;
 985         esac
 986 '
 987
 988 test_lazy_prereq SYMLINKS '
 989         # test whether the filesystem supports symbolic links
 990         ln -s x y && test -h y
 991 '
 992
 993 test_lazy_prereq FILEMODE '
 994         test "$(git config --bool core.filemode)" = true
 995 '
 996
 997 test_lazy_prereq CASE_INSENSITIVE_FS '
 998         echo good >CamelCase &&
 999         echo bad >camelcase &&
1000         test "$(cat CamelCase)" != good
1001 '
1002
1003 test_lazy_prereq UTF8_NFD_TO_NFC '
1004         # check whether FS converts nfd unicode to nfc
1005         auml=$(printf "\303\244")
1006         aumlcdiar=$(printf "\141\314\210")
1007         >"$auml" &&
1008         case "$(echo *)" in
1009         "$aumlcdiar")
1010                 true ;;
1011         *)
1012                 false ;;
1013         esac
1014 '
1015
1016 test_lazy_prereq AUTOIDENT '
1017         sane_unset GIT_AUTHOR_NAME &&
1018         sane_unset GIT_AUTHOR_EMAIL &&
1019         git var GIT_AUTHOR_IDENT
1020 '
1021
1022 test_lazy_prereq EXPENSIVE '
1023         test -n "$GIT_TEST_LONG"
1024 '
1025
1026 test_lazy_prereq USR_BIN_TIME '
1027         test -x /usr/bin/time
1028 '
1029
1030 # When the tests are run as root, permission tests will report that
1031 # things are writable when they shouldn't be.
1032 test -w / || test_set_prereq SANITY
1033
1034 GIT_UNZIP=${GIT_UNZIP:-unzip}
1035 test_lazy_prereq UNZIP '
1036         "$GIT_UNZIP" -v
1037         test $? -ne 127
1038 '