1 #include "git-compat-util.h"
3 #include "pack-revindex.h"
4 #include "object-file.h"
5 #include "object-store.h"
10 #include "csum-file.h"
12 struct revindex_entry
{
18 * Pack index for existing packs give us easy access to the offsets into
19 * corresponding pack file where each object's data starts, but the entries
20 * do not store the size of the compressed representation (uncompressed
21 * size is easily available by examining the pack entry header). It is
22 * also rather expensive to find the sha1 for an object given its offset.
24 * The pack index file is sorted by object name mapping to offset;
25 * this revindex array is a list of offset/index_nr pairs
26 * ordered by offset, so if you know the offset of an object, next offset
27 * is where its packed representation ends and the index_nr can be used to
28 * get the object sha1 from the main index.
32 * This is a least-significant-digit radix sort.
34 * It sorts each of the "n" items in "entries" by its offset field. The "max"
35 * parameter must be at least as large as the largest offset in the array,
36 * and lets us quit the sort early.
38 static void sort_revindex(struct revindex_entry
*entries
, unsigned n
, off_t max
)
41 * We use a "digit" size of 16 bits. That keeps our memory
42 * usage reasonable, and we can generally (for a 4G or smaller
43 * packfile) quit after two rounds of radix-sorting.
45 #define DIGIT_SIZE (16)
46 #define BUCKETS (1 << DIGIT_SIZE)
48 * We want to know the bucket that a[i] will go into when we are using
49 * the digit that is N bits from the (least significant) end.
51 #define BUCKET_FOR(a, i, bits) (((a)[(i)].offset >> (bits)) & (BUCKETS-1))
54 * We need O(n) temporary storage. Rather than do an extra copy of the
55 * partial results into "entries", we sort back and forth between the
56 * real array and temporary storage. In each iteration of the loop, we
57 * keep track of them with alias pointers, always sorting from "from"
60 struct revindex_entry
*tmp
, *from
, *to
;
64 ALLOC_ARRAY(pos
, BUCKETS
);
70 * If (max >> bits) is zero, then we know that the radix digit we are
71 * on (and any higher) will be zero for all entries, and our loop will
72 * be a no-op, as everybody lands in the same zero-th bucket.
74 for (bits
= 0; max
>> bits
; bits
+= DIGIT_SIZE
) {
77 memset(pos
, 0, BUCKETS
* sizeof(*pos
));
80 * We want pos[i] to store the index of the last element that
81 * will go in bucket "i" (actually one past the last element).
82 * To do this, we first count the items that will go in each
83 * bucket, which gives us a relative offset from the last
84 * bucket. We can then cumulatively add the index from the
85 * previous bucket to get the true index.
87 for (i
= 0; i
< n
; i
++)
88 pos
[BUCKET_FOR(from
, i
, bits
)]++;
89 for (i
= 1; i
< BUCKETS
; i
++)
93 * Now we can drop the elements into their correct buckets (in
94 * our temporary array). We iterate the pos counter backwards
95 * to avoid using an extra index to count up. And since we are
96 * going backwards there, we must also go backwards through the
97 * array itself, to keep the sort stable.
99 * Note that we use an unsigned iterator to make sure we can
100 * handle 2^32-1 objects, even on a 32-bit system. But this
101 * means we cannot use the more obvious "i >= 0" loop condition
102 * for counting backwards, and must instead check for
103 * wrap-around with UINT_MAX.
105 for (i
= n
- 1; i
!= UINT_MAX
; i
--)
106 to
[--pos
[BUCKET_FOR(from
, i
, bits
)]] = from
[i
];
109 * Now "to" contains the most sorted list, so we swap "from" and
110 * "to" for the next iteration.
116 * If we ended with our data in the original array, great. If not,
117 * we have to move it back from the temporary storage.
120 COPY_ARRAY(entries
, tmp
, n
);
130 * Ordered list of offsets of objects in the pack.
132 static void create_pack_revindex(struct packed_git
*p
)
134 const unsigned num_ent
= p
->num_objects
;
136 const char *index
= p
->index_data
;
137 const unsigned hashsz
= the_hash_algo
->rawsz
;
139 ALLOC_ARRAY(p
->revindex
, num_ent
+ 1);
142 if (p
->index_version
> 1) {
143 const uint32_t *off_32
=
144 (uint32_t *)(index
+ 8 + (size_t)p
->num_objects
* (hashsz
+ 4));
145 const uint32_t *off_64
= off_32
+ p
->num_objects
;
146 for (i
= 0; i
< num_ent
; i
++) {
147 const uint32_t off
= ntohl(*off_32
++);
148 if (!(off
& 0x80000000)) {
149 p
->revindex
[i
].offset
= off
;
151 p
->revindex
[i
].offset
= get_be64(off_64
);
154 p
->revindex
[i
].nr
= i
;
157 for (i
= 0; i
< num_ent
; i
++) {
158 const uint32_t hl
= *((uint32_t *)(index
+ (hashsz
+ 4) * i
));
159 p
->revindex
[i
].offset
= ntohl(hl
);
160 p
->revindex
[i
].nr
= i
;
165 * This knows the pack format -- the hash trailer
166 * follows immediately after the last object data.
168 p
->revindex
[num_ent
].offset
= p
->pack_size
- hashsz
;
169 p
->revindex
[num_ent
].nr
= -1;
170 sort_revindex(p
->revindex
, num_ent
, p
->pack_size
);
173 static int create_pack_revindex_in_memory(struct packed_git
*p
)
175 if (git_env_bool(GIT_TEST_REV_INDEX_DIE_IN_MEMORY
, 0))
176 die("dying as requested by '%s'",
177 GIT_TEST_REV_INDEX_DIE_IN_MEMORY
);
178 if (open_pack_index(p
))
180 create_pack_revindex(p
);
184 static char *pack_revindex_filename(struct packed_git
*p
)
187 if (!strip_suffix(p
->pack_name
, ".pack", &len
))
188 BUG("pack_name does not end in .pack");
189 return xstrfmt("%.*s.rev", (int)len
, p
->pack_name
);
192 #define RIDX_HEADER_SIZE (12)
193 #define RIDX_MIN_SIZE (RIDX_HEADER_SIZE + (2 * the_hash_algo->rawsz))
195 struct revindex_header
{
201 static int load_revindex_from_disk(char *revindex_name
,
202 uint32_t num_objects
,
203 const uint32_t **data_p
, size_t *len_p
)
208 size_t revindex_size
;
209 struct revindex_header
*hdr
;
211 if (git_env_bool(GIT_TEST_REV_INDEX_DIE_ON_DISK
, 0))
212 die("dying as requested by '%s'", GIT_TEST_REV_INDEX_DIE_ON_DISK
);
214 fd
= git_open(revindex_name
);
217 /* "No file" means return 1. */
221 if (fstat(fd
, &st
)) {
222 ret
= error_errno(_("failed to read %s"), revindex_name
);
226 revindex_size
= xsize_t(st
.st_size
);
228 if (revindex_size
< RIDX_MIN_SIZE
) {
229 ret
= error(_("reverse-index file %s is too small"), revindex_name
);
233 if (revindex_size
- RIDX_MIN_SIZE
!= st_mult(sizeof(uint32_t), num_objects
)) {
234 ret
= error(_("reverse-index file %s is corrupt"), revindex_name
);
238 data
= xmmap(NULL
, revindex_size
, PROT_READ
, MAP_PRIVATE
, fd
, 0);
241 if (ntohl(hdr
->signature
) != RIDX_SIGNATURE
) {
242 ret
= error(_("reverse-index file %s has unknown signature"), revindex_name
);
245 if (ntohl(hdr
->version
) != 1) {
246 ret
= error(_("reverse-index file %s has unsupported version %"PRIu32
),
247 revindex_name
, ntohl(hdr
->version
));
250 if (!(ntohl(hdr
->hash_id
) == 1 || ntohl(hdr
->hash_id
) == 2)) {
251 ret
= error(_("reverse-index file %s has unsupported hash id %"PRIu32
),
252 revindex_name
, ntohl(hdr
->hash_id
));
259 munmap(data
, revindex_size
);
261 *len_p
= revindex_size
;
262 *data_p
= (const uint32_t *)data
;
270 int load_pack_revindex_from_disk(struct packed_git
*p
)
274 if (open_pack_index(p
))
277 revindex_name
= pack_revindex_filename(p
);
279 ret
= load_revindex_from_disk(revindex_name
,
286 p
->revindex_data
= (const uint32_t *)((const char *)p
->revindex_map
+ RIDX_HEADER_SIZE
);
293 int load_pack_revindex(struct repository
*r
, struct packed_git
*p
)
295 if (p
->revindex
|| p
->revindex_data
)
298 prepare_repo_settings(r
);
300 if (r
->settings
.pack_read_reverse_index
&&
301 !load_pack_revindex_from_disk(p
))
303 else if (!create_pack_revindex_in_memory(p
))
309 * verify_pack_revindex verifies that the on-disk rev-index for the given
310 * pack-file is the same that would be created if written from scratch.
312 * A negative number is returned on error.
314 int verify_pack_revindex(struct packed_git
*p
)
318 /* Do not bother checking if not initialized. */
319 if (!p
->revindex_map
|| !p
->revindex_data
)
322 if (!hashfile_checksum_valid((const unsigned char *)p
->revindex_map
, p
->revindex_size
)) {
323 error(_("invalid checksum"));
327 /* This may fail due to a broken .idx. */
328 if (create_pack_revindex_in_memory(p
))
331 for (size_t i
= 0; i
< p
->num_objects
; i
++) {
332 uint32_t nr
= p
->revindex
[i
].nr
;
333 uint32_t rev_val
= get_be32(p
->revindex_data
+ i
);
336 error(_("invalid rev-index position at %"PRIu64
": %"PRIu32
" != %"PRIu32
""),
337 (uint64_t)i
, nr
, rev_val
);
345 int load_midx_revindex(struct multi_pack_index
*m
)
347 struct strbuf revindex_name
= STRBUF_INIT
;
350 if (m
->revindex_data
)
353 if (m
->chunk_revindex
) {
355 * If the MIDX `m` has a `RIDX` chunk, then use its contents for
356 * the reverse index instead of trying to load a separate `.rev`
359 * Note that we do *not* set `m->revindex_map` here, since we do
360 * not want to accidentally call munmap() in the middle of the
363 trace2_data_string("load_midx_revindex", the_repository
,
365 m
->revindex_data
= (const uint32_t *)m
->chunk_revindex
;
369 trace2_data_string("load_midx_revindex", the_repository
,
372 get_midx_rev_filename(&revindex_name
, m
);
374 ret
= load_revindex_from_disk(revindex_name
.buf
,
381 m
->revindex_data
= (const uint32_t *)((const char *)m
->revindex_map
+ RIDX_HEADER_SIZE
);
384 strbuf_release(&revindex_name
);
388 int close_midx_revindex(struct multi_pack_index
*m
)
390 if (!m
|| !m
->revindex_map
)
393 munmap((void*)m
->revindex_map
, m
->revindex_len
);
395 m
->revindex_map
= NULL
;
396 m
->revindex_data
= NULL
;
402 int offset_to_pack_pos(struct packed_git
*p
, off_t ofs
, uint32_t *pos
)
406 if (load_pack_revindex(the_repository
, p
) < 0)
410 hi
= p
->num_objects
+ 1;
413 const unsigned mi
= lo
+ (hi
- lo
) / 2;
414 off_t got
= pack_pos_to_offset(p
, mi
);
419 } else if (ofs
< got
)
425 error("bad offset for revindex");
429 uint32_t pack_pos_to_index(struct packed_git
*p
, uint32_t pos
)
431 if (!(p
->revindex
|| p
->revindex_data
))
432 BUG("pack_pos_to_index: reverse index not yet loaded");
433 if (p
->num_objects
<= pos
)
434 BUG("pack_pos_to_index: out-of-bounds object at %"PRIu32
, pos
);
437 return p
->revindex
[pos
].nr
;
439 return get_be32(p
->revindex_data
+ pos
);
442 off_t
pack_pos_to_offset(struct packed_git
*p
, uint32_t pos
)
444 if (!(p
->revindex
|| p
->revindex_data
))
445 BUG("pack_pos_to_index: reverse index not yet loaded");
446 if (p
->num_objects
< pos
)
447 BUG("pack_pos_to_offset: out-of-bounds object at %"PRIu32
, pos
);
450 return p
->revindex
[pos
].offset
;
451 else if (pos
== p
->num_objects
)
452 return p
->pack_size
- the_hash_algo
->rawsz
;
454 return nth_packed_object_offset(p
, pack_pos_to_index(p
, pos
));
457 uint32_t pack_pos_to_midx(struct multi_pack_index
*m
, uint32_t pos
)
459 if (!m
->revindex_data
)
460 BUG("pack_pos_to_midx: reverse index not yet loaded");
461 if (m
->num_objects
<= pos
)
462 BUG("pack_pos_to_midx: out-of-bounds object at %"PRIu32
, pos
);
463 return get_be32(m
->revindex_data
+ pos
);
466 struct midx_pack_key
{
470 uint32_t preferred_pack
;
471 struct multi_pack_index
*midx
;
474 static int midx_pack_order_cmp(const void *va
, const void *vb
)
476 const struct midx_pack_key
*key
= va
;
477 struct multi_pack_index
*midx
= key
->midx
;
479 uint32_t versus
= pack_pos_to_midx(midx
, (uint32_t*)vb
- (const uint32_t *)midx
->revindex_data
);
480 uint32_t versus_pack
= nth_midxed_pack_int_id(midx
, versus
);
483 uint32_t key_preferred
= key
->pack
== key
->preferred_pack
;
484 uint32_t versus_preferred
= versus_pack
== key
->preferred_pack
;
487 * First, compare the preferred-ness, noting that the preferred pack
490 if (key_preferred
&& !versus_preferred
)
492 else if (!key_preferred
&& versus_preferred
)
495 /* Then, break ties first by comparing the pack IDs. */
496 if (key
->pack
< versus_pack
)
498 else if (key
->pack
> versus_pack
)
501 /* Finally, break ties by comparing offsets within a pack. */
502 versus_offset
= nth_midxed_offset(midx
, versus
);
503 if (key
->offset
< versus_offset
)
505 else if (key
->offset
> versus_offset
)
511 int midx_to_pack_pos(struct multi_pack_index
*m
, uint32_t at
, uint32_t *pos
)
513 struct midx_pack_key key
;
516 if (!m
->revindex_data
)
517 BUG("midx_to_pack_pos: reverse index not yet loaded");
518 if (m
->num_objects
<= at
)
519 BUG("midx_to_pack_pos: out-of-bounds object at %"PRIu32
, at
);
521 key
.pack
= nth_midxed_pack_int_id(m
, at
);
522 key
.offset
= nth_midxed_offset(m
, at
);
525 * The preferred pack sorts first, so determine its identifier by
526 * looking at the first object in pseudo-pack order.
528 * Note that if no --preferred-pack is explicitly given when writing a
529 * multi-pack index, then whichever pack has the lowest identifier
530 * implicitly is preferred (and includes all its objects, since ties are
531 * broken first by pack identifier).
533 key
.preferred_pack
= nth_midxed_pack_int_id(m
, pack_pos_to_midx(m
, 0));
535 found
= bsearch(&key
, m
->revindex_data
, m
->num_objects
,
536 sizeof(*m
->revindex_data
), midx_pack_order_cmp
);
539 return error("bad offset for revindex");
541 *pos
= found
- m
->revindex_data
;