source3/Makefile.in

   1 #########################################################################
   2 # Makefile.in for Samba - rewritten for autoconf support
   3 # Copyright Andrew Tridgell 1992-1998
   4 # Copyright (C) 2001 by Martin Pool <mbp@samba.org>
   5 # Copyright Andrew Barteltt 2002
   6 ###########################################################################
   7
   8 prefix=@prefix@
   9 exec_prefix=@exec_prefix@
  10 mandir=@mandir@
  11
  12 LIBS=@LIBS@
  13 CC=@CC@
  14 SHLD=@SHLD@
  15 CFLAGS=@CFLAGS@
  16 CPPFLAGS=@CPPFLAGS@
  17 EXEEXT=@EXEEXT@
  18 LDFLAGS=@LDFLAGS@
  19 LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@ @CFLAGS@
  20 AWK=@AWK@
  21 DYNEXP=@DYNEXP@
  22 PYTHON=@PYTHON@
  23
  24 TERMLDFLAGS=@TERMLDFLAGS@
  25 TERMLIBS=@TERMLIBS@
  26 PRINTLIBS=@PRINTLIBS@
  27 AUTHLIBS=@AUTHLIBS@
  28
  29 LINK=$(CC) $(FLAGS) $(LDFLAGS)
  30
  31 INSTALLCMD=@INSTALL@
  32
  33 VPATH=@srcdir@
  34 srcdir=@srcdir@
  35 builddir=@builddir@
  36 SHELL=/bin/sh
  37
  38 # XXX: Perhaps this should be @SHELL@ instead -- apparently autoconf
  39 # will search for a POSIX-compliant shell, and that might not be
  40 # /bin/sh on some platforms.  I guess it's not a big problem -- mbp
  41
  42 # See the autoconf manual "Installation Directory Variables" for a
  43 # discussion of thesubtle use of these variables.
  44
  45 BASEDIR= @prefix@
  46 BINDIR = @bindir@
  47 # sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
  48 SBINDIR = @sbindir@
  49 LIBDIR = @libdir@
  50 VFSLIBDIR = $(LIBDIR)/vfs
  51 PDBLIBDIR = $(LIBDIR)/pdb
  52 CONFIGDIR = @configdir@
  53 VARDIR = @localstatedir@
  54 MANDIR = @mandir@
  55
  56 # The permissions to give the executables
  57 INSTALLPERMS = 0755
  58
  59 # set these to where to find various files
  60 # These can be overridden by command line switches (see smbd(8))
  61 # or in smb.conf (see smb.conf(5))
  62 LOGFILEBASE = @logfilebase@
  63 CONFIGFILE = $(CONFIGDIR)/smb.conf
  64 LMHOSTSFILE = $(CONFIGDIR)/lmhosts
  65
  66 # This is where smbpasswd et al go
  67 PRIVATEDIR = @privatedir@
  68
  69 SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
  70 PRIVATE_DIR = $(PRIVATEDIR)
  71
  72 # This is where SWAT images and help files go
  73 SWATDIR = @swatdir@
  74
  75 # the directory where lock files go
  76 LOCKDIR = @lockdir@
  77
  78 # the directory where pid files go
  79 PIDDIR = @piddir@
  80 # man pages language(s)
  81 man_langs = "@manlangs@"
  82
  83 LIBSMBCLIENT_MAJOR=0
  84 LIBSMBCLIENT_MINOR=1
  85
  86
  87 FLAGS1 = $(CFLAGS) @FLAGS1@ -Iinclude -I$(srcdir)/include -I$(srcdir)/ubiqx -I$(srcdir)/smbwrapper  -I. $(CPPFLAGS) -I$(srcdir)
  88 FLAGS2 =
  89 FLAGS3 =
  90 FLAGS4 =
  91 FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
  92 FLAGS  = $(ISA) $(FLAGS5)
  93 FLAGS32  = $(ISA32) $(FLAGS5)
  94
  95 PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATE_DIR)\"
  96 PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\"  -DSBINDIR=\"$(SBINDIR)\"
  97 PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" -DDRIVERFILE=\"$(DRIVERFILE)\"
  98 PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
  99 PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\"  -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\"
 100 PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" -DLOGFILEBASE=\"$(LOGFILEBASE)\"
 101 PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\"
 102 PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS)
 103
 104 # Note that all executable programs now provide for an optional executable suffix.
 105
 106 SBIN_PROGS = bin/smbd@EXEEXT@ bin/nmbd@EXEEXT@ bin/swat@EXEEXT@ \
 107         bin/wrepld@EXEEXT@ @EXTRA_SBIN_PROGS@
 108
 109 BIN_PROGS1 = bin/smbclient@EXEEXT@ bin/net@EXEEXT@ bin/smbspool@EXEEXT@ \
 110         bin/testparm@EXEEXT@ bin/testprns@EXEEXT@ bin/smbstatus@EXEEXT@
 111 BIN_PROGS2 = bin/smbcontrol@EXEEXT@ bin/smbtree@EXEEXT@ bin/tdbbackup@EXEEXT@ \
 112         bin/nmblookup@EXEEXT@ bin/pdbedit@EXEEXT@
 113 BIN_PROGS3 = bin/smbpasswd@EXEEXT@ bin/rpcclient@EXEEXT@ bin/smbcacls@EXEEXT@ \
 114         bin/profiles@EXEEXT@ bin/smbgroupedit@EXEEXT@
 115
 116 TORTURE_PROGS = bin/smbtorture@EXEEXT@ bin/msgtest@EXEEXT@ \
 117         bin/masktest@EXEEXT@ bin/locktest@EXEEXT@ \
 118         bin/locktest2@EXEEXT@ bin/nsstest@EXEEXT@ bin/vfstest@EXEEXT@
 119
 120 BIN_PROGS = $(BIN_PROGS1) $(BIN_PROGS2) $(BIN_PROGS3) @EXTRA_BIN_PROGS@
 121
 122 SHLIBS = @SHLIB_PROGS@ @LIBSMBCLIENT@
 123
 124 SCRIPTS = $(srcdir)/script/smbtar $(srcdir)/script/addtosmbpass $(srcdir)/script/convert_smbpasswd \
 125           $(builddir)/script/findsmb
 126
 127 QUOTAOBJS=@QUOTAOBJS@
 128
 129 VFS_MODULES = bin/vfs_audit.@SHLIBEXT@ bin/vfs_recycle.@SHLIBEXT@ bin/vfs_netatalk.@SHLIBEXT@
 130 PDB_MODULES = @MODULE_MYSQL@ @MODULE_XML@
 131
 132 ######################################################################
 133 # object file lists
 134 ######################################################################
 135
 136 TDBBASE_OBJ = tdb/tdb.o tdb/spinlock.o
 137 TDB_OBJ = $(TDBBASE_OBJ) tdb/tdbutil.o
 138
 139 LIB_OBJ = lib/charcnv.o lib/debug.o lib/fault.o \
 140           lib/getsmbpass.o lib/interface.o lib/md4.o \
 141           lib/interfaces.o lib/pidfile.o lib/replace.o \
 142           lib/signal.o lib/system.o lib/sendfile.o lib/time.o \
 143           lib/ufc.o lib/genrand.o lib/username.o \
 144           lib/util_getent.o lib/util_pw.o lib/access.o lib/smbrun.o \
 145           lib/bitmap.o lib/crc32.o lib/snprintf.o lib/dprintf.o \
 146           lib/xfile.o lib/wins_srv.o \
 147           lib/util_str.o lib/util_sid.o lib/util_uuid.o \
 148           lib/util_unistr.o lib/util_file.o lib/data_blob.o \
 149           lib/util.o lib/util_sock.o lib/util_sec.o \
 150           lib/talloc.o lib/hash.o lib/substitute.o lib/fsusage.o \
 151           lib/ms_fnmatch.o lib/select.o lib/messages.o \
 152           lib/tallocmsg.o lib/dmallocmsg.o \
 153           lib/md5.o lib/hmacmd5.o lib/iconv.o lib/smbpasswd.o \
 154           nsswitch/wb_client.o nsswitch/wb_common.o \
 155           lib/pam_errors.o intl/lang_tdb.o lib/account_pol.o \
 156           lib/adt_tree.o lib/gencache.o $(TDB_OBJ)
 157
 158 LIB_SMBD_OBJ = lib/system_smbd.o lib/util_smbd.o
 159
 160 READLINE_OBJ = lib/readline.o
 161
 162 POPT_LIB_OBJ = lib/popt_common.o
 163
 164 UBIQX_OBJ = ubiqx/ubi_BinTree.o ubiqx/ubi_Cache.o ubiqx/ubi_SplayTree.o \
 165             ubiqx/ubi_dLinkList.o ubiqx/ubi_sLinkList.o ubiqx/debugparse.o
 166
 167 PARAM_OBJ = param/loadparm.o param/params.o dynconfig.o
 168
 169 LIBADS_OBJ = libads/ldap.o libads/ldap_printer.o libads/sasl.o \
 170              libads/krb5_setpw.o libads/kerberos.o libads/ldap_user.o \
 171              libads/ads_struct.o libads/ads_status.o \
 172              libads/disp_sec.o libads/ads_utils.o libads/ldap_utils.o \
 173              libads/ads_ldap.o
 174
 175 LIBADS_SERVER_OBJ = libads/util.o libads/kerberos_verify.o
 176
 177 SECRETS_OBJ = passdb/secrets.o
 178
 179 LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
 180              libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
 181              libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
 182              libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
 183              libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
 184              libsmb/namequery.o libsmb/nmblib.o libsmb/clistr.o \
 185              libsmb/nterr.o libsmb/smbdes.o libsmb/smbencrypt.o \
 186              libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
 187              libsmb/clioplock.o libsmb/errormap.o libsmb/clirap2.o \
 188              libsmb/passchange.o libsmb/unexpected.o libsmb/doserr.o \
 189              libsmb/namecache.o $(RPC_PARSE_OBJ1)
 190
 191 LIBMSRPC_OBJ = rpc_client/cli_lsarpc.o rpc_client/cli_samr.o \
 192                rpc_client/cli_netlogon.o rpc_client/cli_srvsvc.o \
 193                rpc_client/cli_wkssvc.o rpc_client/cli_dfs.o \
 194                rpc_client/cli_reg.o rpc_client/cli_pipe.o \
 195                rpc_client/cli_spoolss.o rpc_client/cli_spoolss_notify.o  \
 196                rpc_client/cli_ds.o libsmb/namequery_dc.o
 197
 198 LIBMSRPC_SERVER_OBJ = libsmb/trust_passwd.o
 199
 200 LIBMSRPC_PICOBJ = $(LIBMSRPC_OBJ:.o=.po)
 201
 202 REGOBJS_OBJ = registry/reg_objects.o
 203 REGISTRY_OBJ = registry/reg_frontend.o registry/reg_cachehook.o registry/reg_printing.o \
 204                registry/reg_db.o
 205
 206 RPC_SERVER_OBJ = rpc_server/srv_lsa.o rpc_server/srv_lsa_nt.o \
 207                  rpc_server/srv_lsa_hnd.o rpc_server/srv_netlog.o rpc_server/srv_netlog_nt.o \
 208                  rpc_server/srv_pipe_hnd.o rpc_server/srv_reg.o rpc_server/srv_reg_nt.o \
 209                  rpc_server/srv_samr.o rpc_server/srv_samr_nt.o rpc_server/srv_samr_util.o \
 210                  rpc_server/srv_srvsvc.o rpc_server/srv_srvsvc_nt.o \
 211                  rpc_server/srv_util.o rpc_server/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o \
 212                  rpc_server/srv_pipe.o rpc_server/srv_dfs.o rpc_server/srv_dfs_nt.o \
 213                  rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o
 214
 215 # this includes only the low level parse code, not stuff
 216 # that requires knowledge of security contexts
 217 RPC_PARSE_OBJ1 = rpc_parse/parse_prs.o rpc_parse/parse_sec.o \
 218                  rpc_parse/parse_misc.o
 219
 220 RPC_PARSE_OBJ = rpc_parse/parse_lsa.o rpc_parse/parse_net.o \
 221                 rpc_parse/parse_reg.o rpc_parse/parse_rpc.o \
 222                 rpc_parse/parse_samr.o rpc_parse/parse_srv.o \
 223                 rpc_parse/parse_wks.o rpc_parse/parse_ds.o \
 224                 rpc_parse/parse_spoolss.o rpc_parse/parse_dfs.o \
 225                 $(REGOBJS_OBJ)
 226
 227
 228 RPC_CLIENT_OBJ = rpc_client/cli_pipe.o
 229
 230 LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o
 231
 232 PASSDB_GET_SET_OBJ = passdb/pdb_get_set.o
 233
 234 PASSDB_OBJ = $(PASSDB_GET_SET_OBJ) passdb/passdb.o passdb/pdb_interface.o \
 235                 passdb/machine_sid.o passdb/pdb_smbpasswd.o \
 236                 passdb/pdb_tdb.o passdb/pdb_ldap.o passdb/pdb_plugin.o \
 237                 passdb/pdb_unix.o passdb/util_sam_sid.o \
 238                 passdb/pdb_compat.o passdb/pdb_nisplus.o
 239
 240 PDB_XML_OBJ = passdb/pdb_xml.o
 241 PDB_MYSQL_OBJ = passdb/pdb_mysql.o
 242
 243 GROUPDB_OBJ = groupdb/mapping.o
 244
 245 # passdb/smbpass.o passdb/ldap.o passdb/nispass.o
 246
 247 PROFILE_OBJ = profile/profile.o
 248
 249 OPLOCK_OBJ = smbd/oplock.o smbd/oplock_irix.o smbd/oplock_linux.o
 250
 251 NOTIFY_OBJ = smbd/notify.o smbd/notify_hash.o smbd/notify_kernel.o
 252
 253 PLAINTEXT_AUTH_OBJ = auth/pampass.o auth/pass_check.o
 254
 255 UNIGRP_OBJ = libsmb/netlogon_unigrp.o
 256
 257 AUTH_OBJ = auth/auth.o auth/auth_sam.o auth/auth_server.o auth/auth_domain.o \
 258            auth/auth_rhosts.o auth/auth_unix.o auth/auth_util.o auth/auth_winbind.o \
 259            auth/auth_builtin.o auth/auth_compat.o \
 260            $(PLAINTEXT_AUTH_OBJ) $(UNIGRP_OBJ)
 261
 262 MANGLE_OBJ = smbd/mangle.o smbd/mangle_hash.o smbd/mangle_map.o smbd/mangle_hash2.o
 263
 264 SMBD_OBJ_MAIN = smbd/server.o
 265
 266 SMBD_OBJ_SRV = smbd/files.o smbd/chgpasswd.o smbd/connection.o \
 267                smbd/utmp.o smbd/session.o \
 268                smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o smbd/fileio.o \
 269                smbd/ipc.o smbd/lanman.o smbd/negprot.o \
 270                smbd/message.o smbd/nttrans.o smbd/pipes.o \
 271                smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
 272                smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
 273                smbd/blocking.o smbd/sec_ctx.o \
 274                smbd/vfs.o smbd/vfs-wrap.o smbd/statcache.o \
 275                smbd/posix_acls.o lib/sysacls.o lib/server_mutex.o \
 276                smbd/process.o smbd/service.o smbd/error.o \
 277                printing/printfsp.o lib/util_seaccess.o smbd/srvstr.o \
 278                smbd/build_options.o \
 279                smbd/change_trust_pw.o \
 280                $(MANGLE_OBJ)
 281
 282 SMBD_OBJ_BASE = $(SMBD_OBJ_SRV) $(MSDFS_OBJ) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 283                 $(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) $(SECRETS_OBJ) \
 284                 $(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
 285                 $(LIB_OBJ) $(PRINTBACKEND_OBJ) $(QUOTAOBJS) $(OPLOCK_OBJ) \
 286                 $(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ) \
 287                 $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) \
 288                 $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
 289                 $(LIB_SMBD_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ)
 290
 291
 292 PRINTING_OBJ = printing/pcap.o printing/print_svid.o \
 293                                 printing/print_cups.o printing/print_generic.o \
 294                                 printing/lpq_parse.o printing/load.o
 295
 296 PRINTBACKEND_OBJ = printing/printing.o printing/nt_printing.o printing/notify.o \
 297                 printing/printing_db.o
 298
 299 MSDFS_OBJ = msdfs/msdfs.o
 300
 301 SMBD_OBJ = $(SMBD_OBJ_MAIN) $(SMBD_OBJ_BASE)
 302
 303 NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
 304             nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
 305             nmbd/nmbd_browsesync.o nmbd/nmbd_elections.o \
 306             nmbd/nmbd_incomingdgrams.o nmbd/nmbd_incomingrequests.o \
 307             nmbd/nmbd_lmhosts.o nmbd/nmbd_logonnames.o nmbd/nmbd_mynames.o \
 308             nmbd/nmbd_namelistdb.o nmbd/nmbd_namequery.o \
 309             nmbd/nmbd_nameregister.o nmbd/nmbd_namerelease.o \
 310             nmbd/nmbd_nodestatus.o nmbd/nmbd_packets.o \
 311             nmbd/nmbd_processlogon.o nmbd/nmbd_responserecordsdb.o \
 312             nmbd/nmbd_sendannounce.o nmbd/nmbd_serverlistdb.o \
 313             nmbd/nmbd_subnetdb.o nmbd/nmbd_winsproxy.o nmbd/nmbd_winsserver.o \
 314             nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o
 315
 316 NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 317            $(PROFILE_OBJ) $(LIB_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 318
 319 WREPL_OBJ1 = wrepld/server.o wrepld/process.o wrepld/parser.o wrepld/socket.o \
 320              wrepld/partners.o
 321
 322 WREPL_OBJ = $(WREPL_OBJ1)  $(PARAM_OBJ) $(UBIQX_OBJ) \
 323             $(PROFILE_OBJ) $(LIB_OBJ)
 324
 325 SWAT_OBJ1 = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
 326            web/swat.o web/neg_lang.o
 327
 328 SWAT_OBJ = $(SWAT_OBJ1) $(PRINTING_OBJ) $(LIBSMB_OBJ) $(LOCKING_OBJ) \
 329            $(PARAM_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) \
 330            $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ)
 331
 332 SMBSH_OBJ = smbwrapper/smbsh.o smbwrapper/shared.o \
 333             $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 334
 335 STATUS_OBJ = utils/status.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 336              $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 337
 338 SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 339         $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) printing/notify.o \
 340         printing/printing_db.o
 341
 342 SMBTREE_OBJ = utils/smbtree.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 343              $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(LIBSMB_OBJ)
 344
 345 TESTPARM_OBJ = utils/testparm.o \
 346                $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 347
 348 TESTPRNS_OBJ = utils/testprns.o $(PARAM_OBJ) $(PRINTING_OBJ) $(UBIQX_OBJ) \
 349                $(LIB_OBJ)
 350
 351 SMBPASSWD_OBJ = utils/smbpasswd.o $(PARAM_OBJ) $(SECRETS_OBJ) \
 352                 $(LIBSMB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ)\
 353                 $(UBIQX_OBJ) $(LIB_OBJ)
 354
 355 PDBEDIT_OBJ = utils/pdbedit.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(PASSDB_OBJ) \
 356                 $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(SECRETS_OBJ) \
 357                 $(POPT_LIB_OBJ)
 358
 359 SMBGROUPEDIT_OBJ = utils/smbgroupedit.o $(GROUPDB_OBJ) $(PARAM_OBJ) \
 360                 $(LIBSMB_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 361
 362 RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
 363                  rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
 364                  rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
 365                  rpcclient/cmd_dfs.o rpcclient/cmd_reg.o \
 366                  rpcclient/display_sec.o rpcclient/cmd_ds.o
 367
 368 RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
 369              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 370              $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
 371              $(READLINE_OBJ) $(GROUPDB_OBJ) \
 372              $(LIBADS_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 373
 374 PAM_WINBIND_OBJ = nsswitch/pam_winbind.po nsswitch/wb_common.po lib/snprintf.po
 375
 376 SMBW_OBJ1 = smbwrapper/smbw.o \
 377                 smbwrapper/smbw_dir.o smbwrapper/smbw_stat.o \
 378                 smbwrapper/realcalls.o smbwrapper/shared.o \
 379                 smbwrapper/smbw_cache.o
 380
 381 SMBW_OBJ = $(SMBW_OBJ1) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 382                 $(UBIQX_OBJ) $(LIB_OBJ)
 383
 384 SMBWRAPPER_OBJ1 = smbwrapper/wrapped.o
 385
 386 SMBWRAPPER_OBJ = $(SMBW_OBJ) $(SMBWRAPPER_OBJ1)
 387
 388 LIBSMBCLIENT_OBJ = libsmb/libsmbclient.o libsmb/libsmb_compat.o \
 389                    libsmb/libsmb_cache.o $(LIB_OBJ) \
 390                    $(LIBSMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ)
 391
 392 # This shared library is intended for linking with unit test programs
 393 # to test Samba internals.  It's called libbigballofmud.so to
 394 # discourage casual usage.
 395
 396 LIBBIGBALLOFMUD_MAJOR = 0
 397
 398 LIBBIGBALLOFMUD_OBJ = $(LIB_OBJ) $(UBIQX_OBJ) $(PARAM_OBJ) $(SECRETS_OBJ) \
 399         $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
 400         $(GROUPDB_OBJ)
 401
 402 LIBBIGBALLOFMUD_PICOBJS = $(LIBBIGBALLOFMUD_OBJ:.o=.po)
 403
 404 CLIENT_OBJ1 = client/client.o client/clitar.o
 405
 406 CLIENT_OBJ = $(CLIENT_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 407              $(READLINE_OBJ) $(POPT_LIB_OBJ)
 408
 409 NET_OBJ1 = utils/net.o utils/net_ads.o utils/net_ads_cldap.o utils/net_help.o \
 410            utils/net_rap.o utils/net_rpc.o utils/net_rpc_samsync.o \
 411            utils/net_rpc_join.o utils/net_time.o utils/net_lookup.o \
 412            utils/net_cache.o
 413
 414 NET_OBJ = $(NET_OBJ1) $(SECRETS_OBJ) $(LIBSMB_OBJ) \
 415           $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
 416           $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 417           $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) \
 418           $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) $(POPT_LIB_OBJ)
 419
 420 CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 421
 422 MOUNT_OBJ = client/smbmount.o \
 423              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 424
 425 MNT_OBJ = client/smbmnt.o
 426
 427 UMOUNT_OBJ = client/smbumount.o
 428
 429 NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(UBIQX_OBJ) \
 430                 $(LIBSMB_OBJ) $(LIB_OBJ)
 431
 432 SMBTORTURE_OBJ1 = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
 433                 torture/denytest.o torture/mangle_test.o
 434
 435 SMBTORTURE_OBJ = $(SMBTORTURE_OBJ1) \
 436         $(LIBSMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 437
 438 MASKTEST_OBJ = torture/masktest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 439                  $(UBIQX_OBJ) $(LIB_OBJ)
 440
 441 MSGTEST_OBJ = torture/msgtest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 442                  $(UBIQX_OBJ) $(LIB_OBJ)
 443
 444 LOCKTEST_OBJ = torture/locktest.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 445                  $(UBIQX_OBJ) $(LIB_OBJ)
 446
 447 NSSTEST_OBJ = torture/nsstest.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 448                  $(UBIQX_OBJ) $(LIB_OBJ)
 449
 450 VFSTEST_OBJ = torture/cmd_vfs.o torture/vfstest.o $(SMBD_OBJ_BASE) $(READLINE_OBJ)
 451
 452 VFS_AUDIT_OBJ = modules/vfs_audit.o
 453 VFS_RECYCLE_OBJ = modules/vfs_recycle.o
 454 VFS_NETATALK_OBJ = modules/vfs_netatalk.o
 455
 456 LOCKTEST2_OBJ = torture/locktest2.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 457                  $(UBIQX_OBJ) $(LIB_OBJ)
 458
 459 SMBCACLS_OBJ = utils/smbcacls.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 460                  $(UBIQX_OBJ) $(LIB_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ) \
 461                  $(LIBMSRPC_OBJ) $(SECRETS_OBJ)
 462
 463 TALLOCTORT_OBJ = lib/talloctort.o  $(LIB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ)
 464
 465 RPCTORTURE_OBJ = torture/rpctorture.o \
 466              rpcclient/display.o \
 467              rpcclient/cmd_lsarpc.o \
 468              rpcclient/cmd_wkssvc.o \
 469              rpcclient/cmd_samr.o \
 470              rpcclient/cmd_srvsvc.o \
 471              rpcclient/cmd_netlogon.o \
 472              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 473              $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ)
 474
 475 DEBUG2HTML_OBJ = utils/debug2html.o ubiqx/debugparse.o
 476
 477 SMBFILTER_OBJ = utils/smbfilter.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 478                  $(UBIQX_OBJ) $(LIB_OBJ)
 479
 480 PROTO_OBJ = $(SMBD_OBJ_MAIN) \
 481             $(SMBD_OBJ_SRV) $(NMBD_OBJ1) $(SWAT_OBJ1) $(LIB_OBJ) $(LIBSMB_OBJ) \
 482             $(SMBW_OBJ1) $(SMBWRAPPER_OBJ1) $(SMBTORTURE_OBJ1) $(RPCCLIENT_OBJ1) \
 483             $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) $(RPC_CLIENT_OBJ) \
 484             $(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) \
 485             $(AUTH_OBJ) $(PARAM_OBJ) $(LOCKING_OBJ) $(SECRETS_OBJ) \
 486             $(PRINTING_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) $(NOTIFY_OBJ) \
 487             $(QUOTAOBJS) $(PASSDB_OBJ) $(GROUPDB_OBJ) $(MSDFS_OBJ) \
 488             $(READLINE_OBJ) $(PROFILE_OBJ) $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
 489             $(LIB_SMBD_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ)
 490
 491 NSS_OBJ_0 = nsswitch/wins.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBSMB_OBJ) \
 492             $(LIB_OBJ) $(NSSWINS_OBJ)
 493
 494 NSS_OBJ = $(NSS_OBJ_0:.o=.po)
 495
 496 PICOBJS = $(SMBWRAPPER_OBJ:.o=.po)
 497 PICOBJS32 = $(SMBWRAPPER_OBJ:.o=.po32)
 498 LIBSMBCLIENT_PICOBJS = $(LIBSMBCLIENT_OBJ:.o=.po)
 499
 500 PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
 501                pam_smbpass/pam_smb_acct.o pam_smbpass/support.o \
 502                libsmb/smbencrypt.o libsmb/smbdes.o libsmb/nterr.o \
 503                $(PARAM_OBJ) $(LIB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
 504                $(SECRETS_OBJ) $(UBIQX_OBJ)
 505
 506 PAM_SMBPASS_PICOOBJ = $(PAM_SMBPASS_OBJ_0:.o=.po)
 507
 508 WINBINDD_OBJ1 = \
 509                 nsswitch/winbindd.o       \
 510                 nsswitch/winbindd_user.o  \
 511                 nsswitch/winbindd_group.o \
 512                 nsswitch/winbindd_idmap.o \
 513                 nsswitch/winbindd_util.o  \
 514                 nsswitch/winbindd_cache.o \
 515                 nsswitch/winbindd_pam.o   \
 516                 nsswitch/winbindd_sid.o   \
 517                 nsswitch/winbindd_misc.o  \
 518                 nsswitch/winbindd_cm.o \
 519                 nsswitch/winbindd_wins.o \
 520                 nsswitch/winbindd_rpc.o \
 521                 nsswitch/winbindd_ads.o \
 522                 nsswitch/winbindd_dual.o
 523
 524 WINBINDD_OBJ = \
 525                 $(WINBINDD_OBJ1) $(PASSDB_GET_SET_OBJ) \
 526                 $(LIBNMB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 527                 $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) \
 528                 $(PROFILE_OBJ) $(UNIGRP_OBJ) \
 529                 $(SECRETS_OBJ) $(LIBADS_OBJ)
 530
 531 WBINFO_OBJ = nsswitch/wbinfo.o libsmb/smbencrypt.o libsmb/smbdes.o
 532
 533 WINBIND_NSS_OBJ = nsswitch/winbind_nss.o nsswitch/wb_common.o @WINBIND_NSS_EXTRA_OBJS@
 534
 535 WINBIND_NSS_PICOBJS = $(WINBIND_NSS_OBJ:.o=.po)
 536
 537 POPT_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
 538           popt/popthelp.o popt/poptparse.o
 539
 540 TDBBACKUP_OBJ = tdb/tdbbackup.o $(TDBBASE_OBJ)
 541
 542 ######################################################################
 543 # now the rules...
 544 ######################################################################
 545 all : SHOWFLAGS proto_exists $(SBIN_PROGS) $(BIN_PROGS) $(SHLIBS) \
 546         @EXTRA_ALL_TARGETS@
 547
 548 pam_smbpass : SHOWFLAGS bin/pam_smbpass.@SHLIBEXT@
 549
 550 smbwrapper : SHOWFLAGS @SMBWRAPPER@
 551
 552 torture : SHOWFLAGS $(TORTURE_PROGS)
 553
 554 smbtorture : SHOWFLAGS bin/smbtorture@EXEEXT@
 555
 556 masktest : SHOWFLAGS bin/masktest@EXEEXT@
 557
 558 msgtest : SHOWFLAGS bin/msgtest@EXEEXT@
 559
 560 locktest : SHOWFLAGS bin/locktest@EXEEXT@
 561
 562 smbcacls : SHOWFLAGS bin/smbcacls@EXEEXT@
 563
 564 locktest2 : SHOWFLAGS bin/locktest2@EXEEXT@
 565
 566 rpctorture : SHOWFLAGS bin/rpctorture@EXEEXT@
 567
 568 debug2html : SHOWFLAGS bin/debug2html@EXEEXT@
 569
 570 smbfilter : SHOWFLAGS bin/smbfilter@EXEEXT@
 571
 572 talloctort : SHOWFLAGS bin/talloctort@EXEEXT@
 573
 574 nsswitch : SHOWFLAGS bin/winbindd@EXEEXT@ bin/wbinfo@EXEEXT@ nsswitch/libnss_winbind.so nsswitch/pam_winbind.so
 575
 576 wins : SHOWFLAGS nsswitch/libnss_wins.@SHLIBEXT@
 577
 578 modules: SHOWFLAGS proto_exists $(VFS_MODULES) $(PDB_MODULES)
 579
 580 everything: all libsmbclient debug2html smbfilter talloctort modules
 581
 582 .SUFFIXES:
 583 .SUFFIXES: .c .o .po .po32 .lo
 584
 585 SHOWFLAGS:
 586         @echo "Using FLAGS = $(FLAGS)"
 587         @echo "      FLAGS32 = $(FLAGS32)"
 588         @echo "      LIBS = $(LIBS)"
 589         @echo "      LDSHFLAGS = $(LDSHFLAGS)"
 590         @echo "      LDFLAGS = $(LDFLAGS)"
 591
 592 MAKEDIR = || exec false; \
 593           if test -d "$$dir"; then :; else \
 594           echo mkdir "$$dir"; \
 595           mkdir -p "$$dir" >/dev/null 2>&1 || \
 596           test -d "$$dir" || \
 597           mkdir "$$dir" || \
 598           exec false; fi || exec false
 599
 600 .c.o:
 601         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 602          dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 603         @echo Compiling $*.c
 604         @$(CC) -I. -I$(srcdir) $(FLAGS) -c $< \
 605           -o $@
 606 @BROKEN_CC@     -mv `echo $@ | sed 's%^.*/%%g'` $@
 607
 608 # These dependencies are only approximately correct: we want to make
 609 # sure Samba's paths are updated if ./configure is re-run.  Really it
 610 # would be nice if "make prefix=/opt/samba all" also rebuilt things,
 611 # but since we also require "make install prefix=/opt/samba" *not* to
 612 # rebuild it's a bit hard.
 613
 614 dynconfig.o: dynconfig.c Makefile
 615         @echo Compiling $*.c
 616         @$(CC) $(FLAGS) $(PATH_FLAGS) -c $< -o $@
 617
 618 dynconfig.po: dynconfig.c Makefile
 619         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 620           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 621         @echo Compiling $*.c with @PICFLAG@
 622         @$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
 623 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
 624 @POBAD_CC@      @mv $*.po.o $@
 625
 626 .c.po:
 627         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 628           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 629         @echo Compiling $*.c with @PICFLAG@
 630         @$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
 631 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
 632 @POBAD_CC@      @mv $*.po.o $@
 633
 634 # this is for IRIX
 635 .c.po32:
 636         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 637           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 638         @echo Compiling $*.c with @PICFLAG@ and -32
 639         @$(CC) -32 -I. -I$(srcdir) $(FLAGS32) $(PATH_FLAGS) @PICFLAG@ -c $< \
 640           -o $*.po32.o
 641 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po32$$%.o%'` $@.o
 642         @mv $*.po32.o $@
 643
 644 bin/.dummy:
 645         @if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
 646           dir=bin $(MAKEDIR); fi
 647         @: >> $@ || : > $@ # what a fancy emoticon!
 648
 649 bin/smbd@EXEEXT@: $(SMBD_OBJ) @BUILD_POPT@ bin/.dummy
 650         @echo Linking $@
 651         @$(CC) $(FLAGS) -o $@ $(SMBD_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) \
 652           $(AUTHLIBS) $(LIBS) @BUILD_POPT@
 653
 654 bin/nmbd@EXEEXT@: $(NMBD_OBJ) @BUILD_POPT@ bin/.dummy
 655         @echo Linking $@
 656         @$(CC) $(FLAGS) -o $@ $(NMBD_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 657
 658 bin/wrepld@EXEEXT@: $(WREPL_OBJ) bin/.dummy
 659         @echo Linking $@
 660         @$(CC) $(FLAGS) -o $@ $(WREPL_OBJ) $(LDFLAGS) $(LIBS)
 661
 662 bin/swat@EXEEXT@: $(SWAT_OBJ) bin/.dummy
 663         @echo Linking $@
 664         @$(CC) $(FLAGS) -o $@ $(SWAT_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) \
 665           $(AUTHLIBS) $(LIBS)
 666
 667 bin/rpcclient@EXEEXT@: $(RPCCLIENT_OBJ) @BUILD_POPT@ bin/.dummy
 668         @echo Linking $@
 669         @$(CC) $(FLAGS) -o $@ $(RPCCLIENT_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @BUILD_POPT@
 670
 671 bin/smbclient@EXEEXT@: $(CLIENT_OBJ) @BUILD_POPT@ bin/.dummy
 672         @echo Linking $@
 673         @$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @BUILD_POPT@
 674
 675 bin/net@EXEEXT@: $(NET_OBJ) @BUILD_POPT@ bin/.dummy
 676         @echo Linking $@
 677         @$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 678
 679 bin/profiles@EXEEXT@: utils/profiles.o bin/.dummy
 680         @echo Linking $@
 681         @$(CC) $(FLAGS) -o $@ utils/profiles.o $(LDFLAGS) $(LIBS)
 682
 683 bin/smbspool@EXEEXT@: $(CUPS_OBJ) bin/.dummy
 684         @echo Linking $@
 685         @$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(LDFLAGS) $(LIBS)
 686
 687 bin/smbmount@EXEEXT@: $(MOUNT_OBJ) bin/.dummy
 688         @echo Linking $@
 689         @$(CC) $(FLAGS) -o $@ $(MOUNT_OBJ) $(LDFLAGS) $(LIBS)
 690
 691 bin/smbmnt@EXEEXT@: $(MNT_OBJ) bin/.dummy
 692         @echo Linking $@
 693         @$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(LDFLAGS)
 694
 695 bin/smbumount@EXEEXT@: $(UMOUNT_OBJ) bin/.dummy
 696         @echo Linking $@
 697         @$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(LDFLAGS)
 698
 699 bin/testparm@EXEEXT@: $(TESTPARM_OBJ) @BUILD_POPT@ bin/.dummy
 700         @echo Linking $@
 701         @$(CC) $(FLAGS) -o $@ $(TESTPARM_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 702
 703 bin/testprns@EXEEXT@: $(TESTPRNS_OBJ) bin/.dummy
 704         @echo Linking $@
 705         @$(CC) $(FLAGS) -o $@ $(TESTPRNS_OBJ) $(LDFLAGS) $(PRINTLIBS) $(LIBS)
 706
 707 bin/smbstatus@EXEEXT@: $(STATUS_OBJ) @BUILD_POPT@ bin/.dummy
 708         @echo Linking $@
 709         @$(CC) $(FLAGS) -o $@ $(STATUS_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 710
 711 bin/smbcontrol@EXEEXT@: $(SMBCONTROL_OBJ) bin/.dummy
 712         @echo Linking $@
 713         @$(CC) -DUSING_SMBCONTROL $(FLAGS) -o $@ $(SMBCONTROL_OBJ) $(LDFLAGS) $(LIBS)
 714
 715 bin/smbtree@EXEEXT@: $(SMBTREE_OBJ) bin/.dummy
 716         @echo Linking $@
 717         @$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(LIBS)
 718
 719 bin/smbpasswd@EXEEXT@: $(SMBPASSWD_OBJ) bin/.dummy
 720         @echo Linking $@
 721         @$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
 722
 723 bin/pdbedit@EXEEXT@: $(PDBEDIT_OBJ) @BUILD_POPT@ bin/.dummy
 724         @echo Linking $@
 725         @$(CC) $(FLAGS) -o $@ $(PDBEDIT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @BUILD_POPT@
 726
 727 bin/smbgroupedit@EXEEXT@: $(SMBGROUPEDIT_OBJ) bin/.dummy
 728         @echo Linking $@
 729         @$(CC) $(FLAGS) -o $@ $(SMBGROUPEDIT_OBJ) $(LDFLAGS) $(LIBS)
 730
 731 bin/nmblookup@EXEEXT@: $(NMBLOOKUP_OBJ) bin/.dummy
 732         @echo Linking $@
 733         @$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(LIBS)
 734
 735 bin/smbtorture@EXEEXT@: $(SMBTORTURE_OBJ) bin/.dummy
 736         @echo Linking $@
 737         @$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJ) $(LDFLAGS) $(LIBS)
 738
 739 bin/talloctort@EXEEXT@: $(TALLOCTORT_OBJ) bin/.dummy
 740         @echo Linking $@
 741         @$(CC) $(FLAGS) -o $@ $(TALLOCTORT_OBJ) $(LDFLAGS) $(LIBS)
 742
 743 bin/masktest@EXEEXT@: $(MASKTEST_OBJ) bin/.dummy
 744         @echo Linking $@
 745         @$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(LIBS)
 746
 747 bin/msgtest@EXEEXT@: $(MSGTEST_OBJ) bin/.dummy
 748         @echo Linking $@
 749         @$(CC) $(FLAGS) -o $@ $(MSGTEST_OBJ) $(LDFLAGS) $(LIBS)
 750
 751 bin/smbcacls@EXEEXT@: $(SMBCACLS_OBJ) bin/.dummy
 752         @echo Linking $@
 753         @$(CC) $(FLAGS) -o $@ $(SMBCACLS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS)
 754
 755 bin/locktest@EXEEXT@: $(LOCKTEST_OBJ) bin/.dummy
 756         @echo Linking $@
 757         @$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(LIBS)
 758
 759 bin/nsstest@EXEEXT@: $(NSSTEST_OBJ) bin/.dummy
 760         @echo Linking $@
 761         @$(CC) $(FLAGS) -o $@ $(NSSTEST_OBJ) $(LDFLAGS) $(LIBS)
 762
 763 bin/vfstest@EXEEXT@: $(VFSTEST_OBJ) @BUILD_POPT@ bin/.dummy
 764         @echo Linking $@
 765         @$(CC) $(FLAGS) -o $@ $(VFSTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(PRINTLIBS) $(AUTHLIBS) $(LIBS) @BUILD_POPT@
 766
 767 bin/locktest2@EXEEXT@: $(LOCKTEST2_OBJ) bin/.dummy
 768         @echo Linking $@
 769         @$(CC) $(FLAGS) -o $@ $(LOCKTEST2_OBJ) $(LDFLAGS) $(LIBS)
 770
 771 bin/rpctorture@EXEEXT@: $(RPCTORTURE_OBJ) bin/.dummy
 772         @echo Linking $@
 773         @$(CC) $(FLAGS) -o $@ $(RPCTORTURE_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS)
 774
 775 bin/debug2html@EXEEXT@: $(DEBUG2HTML_OBJ) bin/.dummy
 776         @echo Linking $@
 777         @$(CC) $(FLAGS) -o $@ $(DEBUG2HTML_OBJ) $(LDFLAGS) $(LIBS)
 778
 779 bin/smbfilter@EXEEXT@: $(SMBFILTER_OBJ) bin/.dummy
 780         @echo Linking $@
 781         @$(CC) $(FLAGS) -o $@ $(SMBFILTER_OBJ) $(LDFLAGS) $(LIBS)
 782
 783 bin/smbw_sample@EXEEXT@: $(SMBW_OBJ) utils/smbw_sample.o bin/.dummy
 784         @echo Linking $@
 785         @$(CC) $(FLAGS) -o $@ $(SMBW_OBJ) utils/smbw_sample.o $(LDFLAGS) $(LIBS)
 786
 787 bin/smbsh@EXEEXT@: $(SMBSH_OBJ) bin/.dummy
 788         @echo Linking $@
 789         @$(CC) $(FLAGS) -o $@ $(SMBSH_OBJ) $(LDFLAGS) $(LIBS)
 790
 791 bin/smbwrapper.@SHLIBEXT@: $(PICOBJS) bin/.dummy
 792         @echo Linking shared library $@
 793         @$(SHLD) $(LDSHFLAGS) -o $@ $(PICOBJS) $(LIBS) \
 794                 @SONAMEFLAG@`basename $@`
 795
 796 bin/smbwrapper.32.@SHLIBEXT@: $(PICOBJS32)
 797         @echo Linking shared library $@
 798         @$(SHLD) -32 $(LDSHFLAGS) -o $@ $(PICOBJS32) $(LIBS) \
 799                 @SONAMEFLAG@`basename $@`
 800
 801 bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS)
 802         @echo Linking libsmbclient shared library $@
 803         $(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \
 804                 @SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR)
 805
 806 bin/libsmbclient.a: $(LIBSMBCLIENT_PICOBJS)
 807         @echo Linking libsmbclient non-shared library $@
 808         -$(AR) -rc $@ $(LIBSMBCLIENT_PICOBJS)
 809
 810 bin/libbigballofmud.@SHLIBEXT@: $(LIBBIGBALLOFMUD_PICOBJS)
 811         @echo Linking bigballofmud shared library $@
 812         $(SHLD) $(LDSHFLAGS) -o $@ $(LIBBIGBALLOFMUD_PICOBJS) $(LIBS) \
 813                 @SONAMEFLAG@`basename $@`.$(LIBBIGBALLOFMUD_MAJOR)
 814
 815 libsmbclient: bin/libsmbclient.a bin/libsmbclient.@SHLIBEXT@
 816
 817 nsswitch/libnss_wins.@SHLIBEXT@: $(NSS_OBJ)
 818         @echo "Linking $@"
 819         @$(SHLD) $(LDSHFLAGS) -o $@ $(NSS_OBJ) -lc \
 820                 @SONAMEFLAG@`basename $@`
 821
 822 bin/winbindd@EXEEXT@: $(WINBINDD_OBJ) bin/.dummy
 823         @echo Linking $@
 824         @$(LINK) -o $@ $(WINBINDD_OBJ) $(DYNEXP) $(LIBS)
 825
 826 nsswitch/libns_winbind.@SHLIBEXT@: $(WINBIND_NSS_PICOBJS)
 827         @echo "Linking $@"
 828         @$(SHLD) @LDSHFLAGS@ -o $@ $(WINBIND_NSS_PICOBJS) @WINBIND_NSS_EXTRA_LIBS@ \
 829                 @SONAMEFLAG@`basename $@`
 830
 831 nsswitch/libnss_winbind.@SHLIBEXT@: $(WINBIND_NSS_PICOBJS)
 832         @echo "Linking $@"
 833         @$(SHLD) $(LDSHFLAGS) -o $@ $(WINBIND_NSS_PICOBJS) @WINBIND_NSS_EXTRA_LIBS@ \
 834                 @SONAMEFLAG@`basename $@`
 835
 836 nsswitch/pam_winbind.@SHLIBEXT@: $(PAM_WINBIND_OBJ) bin/.dummy
 837         @echo Linking $@
 838         @$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ) \
 839                 @SONAMEFLAG@`basename $@` -lpam
 840
 841 bin/pdb_mysql.@SHLIBEXT@: $(PDB_MYSQL_OBJ)
 842         @echo "Building plugin $@"
 843         @$(SHLD) $(LDSHFLAGS) -o $@ $(PDB_MYSQL_OBJ) @MYSQL_LIBS@ \
 844                 @SONAMEFLAG@`basename $@`
 845
 846 bin/pdb_xml.@SHLIBEXT@: $(PDB_XML_OBJ)
 847         @echo "Building plugin $@"
 848         @$(SHLD) $(LDSHFLAGS) -o $@ $(PDB_XML_OBJ) @XML_LIBS@ \
 849                 @SONAMEFLAG@`basename $@`
 850
 851 bin/vfs_audit.@SHLIBEXT@: $(VFS_AUDIT_OBJ)
 852         @echo "Building plugin $@"
 853         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_AUDIT_OBJ) \
 854                 @SONAMEFLAG@`basename $@`
 855
 856 bin/vfs_recycle.@SHLIBEXT@: $(VFS_RECYCLE_OBJ)
 857         @echo "Building plugin $@"
 858         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_RECYCLE_OBJ) \
 859                 @SONAMEFLAG@`basename $@`
 860
 861 bin/vfs_netatalk.@SHLIBEXT@: $(VFS_NETATALK_OBJ)
 862         @echo "Building plugin $@"
 863         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_NETATALK_OBJ) \
 864                 @SONAMEFLAG@`basename $@`
 865
 866 bin/wbinfo@EXEEXT@: $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 867                 $(UBIQX_OBJ) $(SECRETS_OBJ) @BUILD_POPT@ bin/.dummy
 868         @echo Linking $@
 869         @$(LINK) -o $@ $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 870                 $(UBIQX_OBJ) $(SECRETS_OBJ) $(LIBS) @BUILD_POPT@
 871
 872 bin/pam_smbpass.@SHLIBEXT@: $(PAM_SMBPASS_PICOOBJ)
 873         @echo "Linking shared library $@"
 874         $(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(DYNEXP) $(LIBS) -lc
 875
 876 bin/libmsrpc.a: $(LIBMSRPC_PICOBJ)
 877         -$(AR) -rc $@ $(LIBMSRPC_PICOBJ)
 878
 879 bin/tdbbackup@EXEEXT@: $(TDBBACKUP_OBJ) bin/.dummy
 880         @echo Linking $@
 881         @$(CC) $(FLAGS) -o $@ $(TDBBACKUP_OBJ)
 882
 883 install: installbin installman installscripts installdat installswat
 884
 885 install-everything: install installmodules
 886
 887 # DESTDIR is used here to prevent packagers wasting their time
 888 # duplicating the Makefile. Remove it and you will have the privelege
 889 # of package each samba release for muliple versions of multiple
 890 # distributions and operating systems, or at least supplying patches
 891 # to all the packaging files required for this, prior to committing
 892 # the removal of DESTDIR. Do not remove it even though you think it
 893 # is not used
 894
 895 installdirs:
 896         @$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(PRIVATEDIR) $(DESTDIR)$(VFSLIBDIR) $(DESTDIR)$(PDBLIBDIR) $(DESTDIR)$(PIDDIR) $(DESTDIR)$(LOCKDIR)
 897
 898 installservers: all installdirs
 899         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
 900
 901 installbin: all installdirs
 902         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
 903         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(BIN_PROGS)
 904
 905 installmodules: all installdirs
 906         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(VFSLIBDIR) $(VFS_MODULES)
 907         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(PDBLIBDIR) $(PDB_MODULES)
 908
 909 installscripts: installdirs
 910         @$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
 911
 912 installdat: installdirs
 913         @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir)
 914
 915 installswat: installdirs
 916         @$(SHELL) $(srcdir)/script/installswat.sh $(DESTDIR)$(SWATDIR) $(srcdir)
 917
 918 installclientlib:
 919         -$(INSTALLCMD) bin/libsmbclient.@SHLIBEXT@ $(DESTDIR)${prefix}/lib
 920         -$(INSTALLCMD) -d $(DESTDIR)${prefix}/include
 921         -$(INSTALLCMD) include/libsmbclient.h $(DESTDIR)${prefix}/include
 922
 923 # Python extensions
 924
 925 PYTHON_OBJS = $(LIB_OBJ) $(LIBSMB_OBJ) $(RPC_PARSE_OBJ) $(UBIQX_OBJ) \
 926         $(PARAM_OBJ) $(LIBMSRPC_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) $(SECRETS_OBJ)
 927
 928 PY_SPOOLSS_PROTO_OBJ = python/py_spoolss.o \
 929                 python/py_spoolss_printers.o python/py_spoolss_printers_conv.o\
 930                 python/py_spoolss_forms.o python/py_spoolss_forms_conv.o \
 931                 python/py_spoolss_ports.o python/py_spoolss_ports_conv.o \
 932                 python/py_spoolss_drivers.o python/py_spoolss_drivers_conv.o \
 933                 python/py_spoolss_jobs.o python/py_spoolss_jobs_conv.o \
 934                 python/py_spoolss_printerdata.o
 935
 936 PY_LSA_PROTO_OBJ = python/py_lsa.o
 937
 938 PY_COMMON_PROTO_OBJ = python/py_common.c python/py_ntsec.c
 939
 940 python_proto: python_spoolss_proto python_lsa_proto python_common_proto
 941
 942 python_spoolss_proto:
 943         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
 944                 -h _PY_SPOOLSS_PROTO_H python/py_spoolss_proto.h \
 945                 $(PY_SPOOLSS_PROTO_OBJ)
 946
 947 python_lsa_proto:
 948         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
 949                 -h _PY_LSA_PROTO_H python/py_lsa_proto.h \
 950                 $(PY_LSA_PROTO_OBJ)
 951
 952 python_common_proto:
 953         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
 954                 -h _PY_COMMON_PROTO_H python/py_common_proto.h \
 955                 $(PY_COMMON_PROTO_OBJ)
 956
 957 python_ext: $(PYTHON_OBJS)
 958         @if test -z "$(PYTHON)"; then \
 959                 echo Use the option --with-python to configure python; \
 960                 exit 1; fi
 961         PYTHON_OBJS="$(PYTHON_OBJS)" PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS) $(FLAGS)" \
 962         LIBS="$(LIBS)" \
 963                 $(PYTHON) python/setup.py build
 964
 965 python_install: $(PYTHON_OBJS)
 966         @if test -z "$(PYTHON)"; then \
 967                 echo Use the option --with-python to configure python; \
 968                 exit 1; fi
 969         PYTHON_OBJS="$(PYTHON_OBJS)" PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS)" \
 970         LIBS="$(LIBS)" \
 971                 $(PYTHON) python/setup.py install
 972
 973 python_clean:
 974         @if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi
 975
 976 # revert to the previously installed version
 977 revert:
 978         @$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS)
 979         @$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(BIN_PROGS) $(SCRIPTS)
 980
 981 installman:
 982         @$(SHELL) $(srcdir)/script/installman.sh $(DESTDIR)$(MANDIR) $(srcdir) $(man_langs) "@ROFF@"
 983
 984 .PHONY: showlayout
 985
 986 showlayout:
 987         @echo "Samba will be installed into:"
 988         @echo "  basedir: $(BASEDIR)"
 989         @echo "  bindir:  $(BINDIR)"
 990         @echo "  sbindir: $(SBINDIR)"
 991         @echo "  libdir:  $(LIBDIR)"
 992         @echo "  vardir:  $(VARDIR)"
 993         @echo "  mandir:  $(MANDIR)"
 994
 995
 996 uninstall: uninstallman uninstallbin uninstallscripts
 997
 998 uninstallman:
 999         @$(SHELL) $(srcdir)/script/uninstallman.sh $(DESTDIR)$(MANDIR) $(srcdir) $(man_langs)
1000
1001 uninstallbin:
1002         @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(SBIN_PROGS)
1003         @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(BIN_PROGS)
1004
1005 uninstallmodules:
1006         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(PDBLIBDIR) $(DESTDIR)$(VFS_MODULES)
1007         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(VFSLIBDIR) $(DESTDIR)$(PDB_MODULES)
1008
1009 uninstallscripts:
1010         @$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
1011
1012 # Toplevel clean files
1013 TOPFILES=dynconfig.o dynconfig.po
1014
1015 clean: delheaders python_clean
1016         -rm -f core */*~ *~ */*.o */*.po */*.po32 */*.@SHLIBEXT@ \
1017                 $(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(VFS_MODULES) $(PDB_MODULES) $(TORTURE_PROGS) .headers.stamp
1018
1019 # Making this target will just make sure that the prototype files
1020 # exist, not necessarily that they are up to date.  Since they're
1021 # removed by "make clean" this will always be run when you do anything
1022 # afterwards.
1023 proto_exists: include/proto.h include/wrepld_proto.h include/build_env.h \
1024         nsswitch/winbindd_proto.h web/swat_proto.h \
1025         client/client_proto.h utils/net_proto.h
1026
1027 delheaders:
1028         @echo Removing prototype headers
1029         @/bin/rm -f $(srcdir)/include/proto.h $(srcdir)/include/build_env.h
1030         @/bin/rm -f $(srcdir)/include/wrepld_proto.h $(srcdir)/nsswitch/winbindd_proto.h
1031         @/bin/rm -f $(srcdir)/web/swat_proto.h
1032         @/bin/rm -f $(srcdir)/client/client_proto.h $(srcdir)/utils/net_proto.h
1033
1034         @/bin/rm -f include/proto.h include/build_env.h include/wrepld_proto.h \
1035                     nsswitch/winbindd_proto.h web/swat_proto.h \
1036                     client/client_proto.h utils/net_proto.h
1037
1038 include/proto.h:
1039         @echo Building include/proto.h
1040         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1041           -h _PROTO_H_ $(builddir)/include/proto.h \
1042           $(PROTO_OBJ)
1043
1044 include/build_env.h:
1045         @echo Building include/build_env.h
1046         @cd $(srcdir) && $(SHELL) script/build_env.sh $(srcdir) $(builddir) $(CC) > $(builddir)/include/build_env.h
1047
1048 include/wrepld_proto.h:
1049         @echo Building include/wrepld_proto.h
1050         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1051           -h _WREPLD_PROTO_H_ $(builddir)/include/wrepld_proto.h \
1052           $(WREPL_OBJ1)
1053
1054 nsswitch/winbindd_proto.h:
1055         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1056           -h _WINBINDD_PROTO_H_ nsswitch/winbindd_proto.h \
1057           $(WINBINDD_OBJ1)
1058
1059 web/swat_proto.h:
1060         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1061           -h _SWAT_PROTO_H_ web/swat_proto.h \
1062           $(SWAT_OBJ1)
1063
1064 client/client_proto.h:
1065         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1066           -h _CLIENT_PROTO_H_ client/client_proto.h \
1067           $(CLIENT_OBJ1)
1068
1069 utils/net_proto.h:
1070         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1071           -h _CLIENT_PROTO_H_ utils/net_proto.h \
1072           $(NET_OBJ1)
1073
1074 # "make headers" or "make proto" calls a subshell because we need to
1075 # make sure these commands are executed in sequence even for a
1076 # parallel make.
1077 headers:
1078         $(MAKE) delheaders; \
1079         $(MAKE) include/proto.h; \
1080         $(MAKE) include/build_env.h; \
1081         $(MAKE) include/wrepld_proto.h; \
1082         $(MAKE) nsswitch/winbindd_proto.h; \
1083         $(MAKE) web/swat_proto.h; \
1084         $(MAKE) client/client_proto.h; \
1085         $(MAKE) utils/net_proto.h
1086
1087 proto: headers
1088
1089 .PHONY: headers proto
1090
1091 etags:
1092         etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
1093
1094 ctags:
1095         ctags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
1096
1097 realclean: clean delheaders
1098         -rm -f config.log $(BIN_PROGS) $(SBIN_PROGS) bin/.dummy script/findsmb
1099
1100 distclean: realclean
1101         -rm -f include/stamp-h
1102         -rm -f include/config.h Makefile
1103         -rm -f config.status config.cache so_locations
1104         -rm -rf .deps
1105
1106 # this target is really just for my use. It only works on a limited
1107 # range of machines and is used to produce a list of potentially
1108 # dead (ie. unused) functions in the code. (tridge)
1109 finddead:
1110         nm */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
1111         nm */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
1112         comm -13 nmused.txt nmfns.txt
1113
1114
1115 # when configure.in is updated, reconfigure
1116 $(srcdir)/configure: $(srcdir)/configure.in
1117         @echo "WARNING: you need to rerun autoconf"
1118
1119 config.status: $(srcdir)/configure
1120         @echo "WARNING: you need to run configure"
1121
1122 Makefile: $(srcdir)/Makefile.in config.status
1123         @echo "WARNING: you need to run ./config.status"
1124
1125 test_prefix=/tmp/test-samba
1126 # Run regression suite using the external "satyr" framework
1127 check:
1128         @echo "** Sorry, samba self-test without installation does not work "
1129         @echo "** yet.  Please try specifying a scratch directory to"
1130         @echo "**       ./configure --prefix DIR"
1131         @echo "** then run \"make install installcheck\""
1132         exit 1
1133
1134 #       -rm -rf $(test_prefix)/lib
1135 #       mkdir $(test_prefix)/lib -p ./testdir
1136 #       PATH=$(builddir)/bin:$(PATH) \
1137 #       SATYR_SUITEDIR=../testsuite/build_farm/ prefix=$(test_prefix) \
1138 #       testdir=./testdir $(SHELL) satyr
1139
1140 # Run regression suite on the installed version.
1141
1142 # `installcheck'
1143 #      Perform installation tests (if any).  The user must build and
1144 #      install the program before running the tests.  You should not
1145 #      assume that `$(bindir)' is in the search path.
1146
1147 dangerous-installcheck:
1148         mkdir -p $(BASEDIR)/lib
1149         mkdir -p $(BASEDIR)/var
1150         PATH=$(BINDIR):$(SBINDIR):$(PATH) \
1151         SATYR_DISCOURAGE=1 \
1152         SATYR_SUITEDIR=../testsuite/satyr/ prefix=$(BASEDIR) \
1153         LIBSMB_PROG=$(SBINDIR)/smbd \
1154         testdir=./testdir $(SHELL) satyr