source/Makefile.in

   1 #########################################################################
   2 # Makefile.in for Samba - rewritten for autoconf support
   3 # Copyright Andrew Tridgell 1992-1998
   4 # Copyright (C) 2001 by Martin Pool <mbp@samba.org>
   5 # Copyright Andrew Bartlett 2002
   6 # Copyright (C) 2003 Anthony Liguori <aliguor@us.ibm.com>
   7 # Copyright (C) 2002-2003 Jelmer Vernooij <jelmer@samba.org>
   8 ###########################################################################
   9
  10 prefix=@prefix@
  11 exec_prefix=@exec_prefix@
  12 mandir=@mandir@
  13
  14 LIBS=@LIBS@
  15 CC=@CC@
  16 SHLD=@SHLD@
  17 CFLAGS=@CFLAGS@
  18 CPPFLAGS=@CPPFLAGS@
  19 EXEEXT=@EXEEXT@
  20 LDFLAGS=@LDFLAGS@
  21 LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@ @CFLAGS@
  22 WINBIND_NSS_LDSHFLAGS=@WINBIND_NSS_LDSHFLAGS@ @LDFLAGS@ @CFLAGS@
  23 AWK=@AWK@
  24 DYNEXP=@DYNEXP@
  25 PYTHON=@PYTHON@
  26 PERL=@PERL@
  27
  28 TERMLDFLAGS=@TERMLDFLAGS@
  29 TERMLIBS=@TERMLIBS@
  30 PRINTLIBS=@PRINTLIBS@
  31 AUTHLIBS=@AUTHLIBS@
  32 ACLLIBS=@ACLLIBS@
  33 PASSDBLIBS=@PASSDBLIBS@
  34 ADSLIBS=@ADSLIBS@
  35 KRB5LIBS=@KRB5_LIBS@
  36
  37 LINK=$(CC) $(FLAGS) $(LDFLAGS)
  38
  39 INSTALLCMD=@INSTALL@
  40 INSTALLCLIENTCMD_SH=@INSTALLCLIENTCMD_SH@
  41 INSTALLCLIENTCMD_A=@INSTALLCLIENTCMD_A@
  42
  43 VPATH=@srcdir@
  44 srcdir=@srcdir@
  45 builddir=@builddir@
  46 SHELL=/bin/sh
  47
  48 # XXX: Perhaps this should be @SHELL@ instead -- apparently autoconf
  49 # will search for a POSIX-compliant shell, and that might not be
  50 # /bin/sh on some platforms.  I guess it's not a big problem -- mbp
  51
  52 # See the autoconf manual "Installation Directory Variables" for a
  53 # discussion of thesubtle use of these variables.
  54
  55 BASEDIR= @prefix@
  56 BINDIR = @bindir@
  57 # sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
  58 SBINDIR = @sbindir@
  59 LIBDIR = @libdir@
  60 VFSLIBDIR = $(LIBDIR)/vfs
  61 PDBLIBDIR = $(LIBDIR)/pdb
  62 RPCLIBDIR = $(LIBDIR)/rpc
  63 CHARSETLIBDIR = $(LIBDIR)/charset
  64 AUTHLIBDIR = $(LIBDIR)/auth
  65 CONFIGDIR = @configdir@
  66 VARDIR = @localstatedir@
  67 MANDIR = @mandir@
  68
  69 # The permissions to give the executables
  70 INSTALLPERMS = 0755
  71
  72 # set these to where to find various files
  73 # These can be overridden by command line switches (see smbd(8))
  74 # or in smb.conf (see smb.conf(5))
  75 LOGFILEBASE = @logfilebase@
  76 CONFIGFILE = $(CONFIGDIR)/smb.conf
  77 LMHOSTSFILE = $(CONFIGDIR)/lmhosts
  78
  79 # This is where smbpasswd et al go
  80 PRIVATEDIR = @privatedir@
  81
  82 SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
  83 PRIVATE_DIR = $(PRIVATEDIR)
  84
  85 # This is where SWAT images and help files go
  86 SWATDIR = @swatdir@
  87
  88 # the directory where lock files go
  89 LOCKDIR = @lockdir@
  90
  91 # the directory where pid files go
  92 PIDDIR = @piddir@
  93 # man pages language(s)
  94 man_langs = "@manlangs@"
  95
  96 LIBSMBCLIENT=bin/libsmbclient.a @LIBSMBCLIENT_SHARED@
  97 LIBSMBCLIENT_MAJOR=0
  98 LIBSMBCLIENT_MINOR=1
  99
 100
 101 FLAGS1 = $(CFLAGS) @FLAGS1@ -Iinclude -I$(srcdir)/include -I$(srcdir)/ubiqx -I$(srcdir)/smbwrapper  -I. $(CPPFLAGS) -I$(srcdir)
 102 FLAGS2 =
 103 FLAGS3 =
 104 FLAGS4 =
 105 FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
 106 FLAGS  = $(ISA) $(FLAGS5)
 107 FLAGS32  = $(ISA32) $(FLAGS5)
 108
 109 PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATE_DIR)\"
 110 PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\"  -DSBINDIR=\"$(SBINDIR)\"
 111 PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" -DDRIVERFILE=\"$(DRIVERFILE)\"
 112 PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
 113 PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\"  -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\"
 114 PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \
 115               -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\"
 116 PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\"
 117 PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS)
 118
 119 # Note that all executable programs now provide for an optional executable suffix.
 120
 121 SBIN_PROGS = bin/smbd@EXEEXT@ bin/nmbd@EXEEXT@ bin/swat@EXEEXT@ \
 122         bin/wrepld@EXEEXT@ @EXTRA_SBIN_PROGS@
 123
 124 BIN_PROGS1 = bin/smbclient@EXEEXT@ bin/net@EXEEXT@ bin/smbspool@EXEEXT@ \
 125         bin/testparm@EXEEXT@ bin/testprns@EXEEXT@ bin/smbstatus@EXEEXT@
 126 BIN_PROGS2 = bin/smbcontrol@EXEEXT@ bin/smbtree@EXEEXT@ bin/tdbbackup@EXEEXT@ \
 127         bin/nmblookup@EXEEXT@ bin/pdbedit@EXEEXT@
 128 BIN_PROGS3 = bin/smbpasswd@EXEEXT@ bin/rpcclient@EXEEXT@ bin/smbcacls@EXEEXT@ \
 129         bin/profiles@EXEEXT@ bin/smbgroupedit@EXEEXT@ bin/ntlm_auth@EXEEXT@ \
 130         bin/editreg@EXEEXT@ bin/smbcquotas@EXEEXT@
 131
 132 TORTURE_PROGS = bin/smbtorture@EXEEXT@ bin/msgtest@EXEEXT@ \
 133         bin/masktest@EXEEXT@ bin/locktest@EXEEXT@ \
 134         bin/locktest2@EXEEXT@ bin/nsstest@EXEEXT@ bin/vfstest@EXEEXT@
 135
 136 BIN_PROGS = $(BIN_PROGS1) $(BIN_PROGS2) $(BIN_PROGS3) @EXTRA_BIN_PROGS@
 137
 138 EVERYTHING_PROGS = bin/debug2html@EXEEXT@ bin/smbfilter@EXEEXT@ bin/talloctort@EXEEXT@
 139
 140 SHLIBS = @SHLIB_PROGS@ @LIBSMBCLIENT@
 141
 142 SCRIPTS = $(srcdir)/script/smbtar $(srcdir)/script/addtosmbpass $(srcdir)/script/convert_smbpasswd \
 143           $(builddir)/script/findsmb
 144
 145 QUOTAOBJS=@QUOTAOBJS@
 146
 147 VFS_MODULES = @VFS_MODULES@
 148 PDB_MODULES = @PDB_MODULES@
 149 RPC_MODULES = @RPC_MODULES@
 150 CHARSET_MODULES = @CHARSET_MODULES@
 151 AUTH_MODULES = @AUTH_MODULES@
 152 MODULES = $(VFS_MODULES) $(PDB_MODULES) $(RPC_MODULES) $(CHARSET_MODULES) $(AUTH_MODULES)
 153
 154 ######################################################################
 155 # object file lists
 156 ######################################################################
 157
 158 TDBBASE_OBJ = tdb/tdb.o tdb/spinlock.o
 159 TDB_OBJ = $(TDBBASE_OBJ) tdb/tdbutil.o
 160
 161 LIB_OBJ = lib/charcnv.o lib/debug.o lib/fault.o \
 162           lib/getsmbpass.o lib/interface.o lib/md4.o \
 163           lib/interfaces.o lib/pidfile.o lib/replace.o \
 164           lib/signal.o lib/system.o lib/sendfile.o lib/time.o \
 165           lib/ufc.o lib/genrand.o lib/username.o \
 166           lib/util_getent.o lib/util_pw.o lib/access.o lib/smbrun.o \
 167           lib/bitmap.o lib/crc32.o lib/snprintf.o lib/dprintf.o \
 168           lib/xfile.o lib/wins_srv.o \
 169           lib/util_str.o lib/clobber.o lib/util_sid.o lib/util_uuid.o \
 170           lib/util_unistr.o lib/util_file.o lib/data_blob.o \
 171           lib/util.o lib/util_sock.o lib/util_sec.o \
 172           lib/talloc.o lib/hash.o lib/substitute.o lib/fsusage.o \
 173           lib/ms_fnmatch.o lib/select.o lib/messages.o \
 174           lib/tallocmsg.o lib/dmallocmsg.o \
 175           lib/md5.o lib/hmacmd5.o lib/iconv.o lib/smbpasswd.o \
 176           nsswitch/wb_client.o nsswitch/wb_common.o \
 177           lib/pam_errors.o intl/lang_tdb.o lib/account_pol.o \
 178           lib/adt_tree.o lib/gencache.o $(TDB_OBJ) \
 179           lib/module.o lib/genparser.o lib/genparser_samba.o \
 180           lib/ldap_escape.o @CHARSET_STATIC@
 181
 182 LIB_SMBD_OBJ = lib/system_smbd.o lib/util_smbd.o
 183
 184 READLINE_OBJ = lib/readline.o
 185
 186 POPT_LIB_OBJ = lib/popt_common.o
 187
 188 UBIQX_OBJ = ubiqx/ubi_BinTree.o ubiqx/ubi_Cache.o ubiqx/ubi_SplayTree.o \
 189             ubiqx/ubi_dLinkList.o ubiqx/ubi_sLinkList.o
 190
 191 PARAM_OBJ = dynconfig.o param/loadparm.o param/params.o
 192
 193 KRBCLIENT_OBJ = libads/kerberos.o
 194
 195 LIBADS_OBJ = libads/ldap.o libads/ldap_printer.o libads/sasl.o \
 196              libads/krb5_setpw.o libads/ldap_user.o \
 197              libads/ads_struct.o libads/ads_status.o \
 198              libads/disp_sec.o libads/ads_utils.o libads/ldap_utils.o \
 199              libads/ads_ldap.o libads/authdata.o
 200
 201 LIBADS_SERVER_OBJ = libads/util.o libads/kerberos_verify.o
 202
 203 SECRETS_OBJ = passdb/secrets.o
 204
 205 LIBNMB_OBJ = libsmb/unexpected.o libsmb/namecache.o libsmb/nmblib.o \
 206              libsmb/namequery.o
 207
 208 LIBNTLMSSP_OBJ = libsmb/ntlmssp.o libsmb/ntlmssp_parse.o libsmb/ntlmssp_sign.o
 209
 210 LIBSAMBA_OBJ = libsmb/nterr.o libsmb/smbdes.o libsmb/smbencrypt.o
 211
 212 LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
 213              libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
 214              libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
 215              libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
 216              libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
 217              libsmb/clistr.o libsmb/smb_signing.o \
 218              libsmb/cliquota.o libsmb/clifsinfo.o \
 219              libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
 220              libsmb/clioplock.o libsmb/errormap.o libsmb/clirap2.o \
 221              libsmb/passchange.o libsmb/doserr.o \
 222              libsmb/trustdom_cache.o \
 223              $(RPC_PARSE_OBJ1) $(LIBNTLMSSP_OBJ) $(LIBSAMBA_OBJ) $(LIBNMB_OBJ)
 224
 225 LIBMSRPC_OBJ = rpc_client/cli_lsarpc.o rpc_client/cli_samr.o \
 226                rpc_client/cli_netlogon.o rpc_client/cli_srvsvc.o \
 227                rpc_client/cli_wkssvc.o rpc_client/cli_dfs.o \
 228                rpc_client/cli_reg.o rpc_client/cli_pipe.o \
 229                rpc_client/cli_spoolss.o rpc_client/cli_spoolss_notify.o  \
 230                rpc_client/cli_ds.o rpc_client/cli_echo.o libsmb/namequery_dc.o
 231
 232 LIBMSRPC_SERVER_OBJ = libsmb/trusts_util.o
 233
 234 REGOBJS_OBJ = registry/reg_objects.o
 235 REGISTRY_OBJ = registry/reg_frontend.o registry/reg_cachehook.o registry/reg_printing.o \
 236                registry/reg_db.o
 237
 238 RPC_LSA_OBJ = rpc_server/srv_lsa.o rpc_server/srv_lsa_nt.o
 239
 240 RPC_NETLOG_OBJ = rpc_server/srv_netlog.o rpc_server/srv_netlog_nt.o
 241
 242 RPC_SAMR_OBJ = rpc_server/srv_samr.o rpc_server/srv_samr_nt.o \
 243                rpc_server/srv_samr_util.o
 244
 245 RPC_REG_OBJ =  rpc_server/srv_reg.o rpc_server/srv_reg_nt.o
 246
 247 RPC_SVC_OBJ = rpc_server/srv_srvsvc.o rpc_server/srv_srvsvc_nt.o
 248
 249 RPC_WKS_OBJ =  rpc_server/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o
 250
 251 RPC_DFS_OBJ =  rpc_server/srv_dfs.o rpc_server/srv_dfs_nt.o
 252 RPC_SPOOLSS_OBJ = rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o
 253
 254 RPC_PIPE_OBJ = rpc_server/srv_pipe_hnd.o rpc_server/srv_util.o \
 255                rpc_server/srv_pipe.o rpc_server/srv_lsa_hnd.o
 256
 257 RPC_ECHO_OBJ = rpc_server/srv_echo.o rpc_server/srv_echo_nt.o
 258
 259 RPC_SERVER_OBJ = @RPC_STATIC@ $(RPC_PIPE_OBJ)
 260
 261 # this includes only the low level parse code, not stuff
 262 # that requires knowledge of security contexts
 263 RPC_PARSE_OBJ1 = rpc_parse/parse_prs.o rpc_parse/parse_sec.o \
 264                  rpc_parse/parse_misc.o
 265
 266 RPC_PARSE_OBJ = rpc_parse/parse_lsa.o rpc_parse/parse_net.o \
 267                 rpc_parse/parse_reg.o rpc_parse/parse_rpc.o \
 268                 rpc_parse/parse_samr.o rpc_parse/parse_srv.o \
 269                 rpc_parse/parse_wks.o rpc_parse/parse_ds.o \
 270                 rpc_parse/parse_spoolss.o rpc_parse/parse_dfs.o \
 271                 rpc_parse/parse_echo.o \
 272                 $(REGOBJS_OBJ)
 273
 274
 275 RPC_CLIENT_OBJ = rpc_client/cli_pipe.o
 276
 277 LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o
 278
 279 PASSDB_GET_SET_OBJ = passdb/pdb_get_set.o
 280
 281 PASSDB_OBJ = $(PASSDB_GET_SET_OBJ) passdb/passdb.o passdb/pdb_interface.o \
 282                 passdb/machine_sid.o passdb/util_sam_sid.o passdb/pdb_compat.o \
 283                 passdb/privileges.o @LDAP_OBJ@ @PDB_STATIC@
 284
 285 XML_OBJ = modules/xml.o
 286 MYSQL_OBJ = modules/mysql.o
 287 DEVEL_HELP_OBJ = modules/developer.o
 288
 289 SAM_STATIC_MODULES = sam/sam_plugin.o sam/sam_skel.o sam/sam_ads.o
 290
 291 IDMAP_OBJ = sam/idmap.o sam/idmap_tdb.o sam/idmap_winbind.o
 292
 293 SAM_OBJ = sam/account.o sam/get_set_account.o sam/get_set_group.o \
 294                 sam/get_set_domain.o sam/interface.o $(SAM_STATIC_MODULES)
 295
 296 SAMTEST_OBJ = torture/samtest.o torture/cmd_sam.o $(PARAM_OBJ) $(SAM_OBJ) $(LIB_OBJ)  $(LIBSMB_OBJ) $(UBIQX_OBJ) $(READLINE_OBJ) lib/util_seaccess.o $(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(GROUPDB_OBJ)
 297
 298 GROUPDB_OBJ = groupdb/mapping.o
 299
 300 PROFILE_OBJ = profile/profile.o
 301 PROFILES_OBJ = utils/profiles.o
 302 EDITREG_OBJ = utils/editreg.o lib/snprintf.o
 303
 304 OPLOCK_OBJ = smbd/oplock.o smbd/oplock_irix.o smbd/oplock_linux.o
 305
 306 NOTIFY_OBJ = smbd/notify.o smbd/notify_hash.o smbd/notify_kernel.o
 307
 308 PLAINTEXT_AUTH_OBJ = auth/pampass.o auth/pass_check.o
 309
 310 UNIGRP_OBJ = libsmb/netlogon_unigrp.o
 311
 312 AUTH_BUILTIN_OBJ = auth/auth_builtin.o
 313 AUTH_DOMAIN_OBJ = auth/auth_domain.o
 314 AUTH_SAM_OBJ = auth/auth_sam.o
 315 AUTH_RHOSTS_OBJ = auth/auth_rhosts.o
 316 AUTH_SERVER_OBJ = auth/auth_server.o
 317 AUTH_UNIX_OBJ = auth/auth_unix.o
 318 AUTH_WINBIND_OBJ = auth/auth_winbind.o
 319
 320 AUTH_OBJ = auth/auth.o @AUTH_STATIC@ auth/auth_util.o auth/auth_compat.o \
 321                    auth/auth_ntlmssp.o \
 322            $(PLAINTEXT_AUTH_OBJ) $(UNIGRP_OBJ)
 323
 324 MANGLE_OBJ = smbd/mangle.o smbd/mangle_hash.o smbd/mangle_map.o smbd/mangle_hash2.o
 325
 326 SMBD_OBJ_MAIN = smbd/server.o
 327
 328 SMBD_OBJ_SRV = smbd/files.o smbd/chgpasswd.o smbd/connection.o \
 329                smbd/utmp.o smbd/session.o \
 330                smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o smbd/fileio.o \
 331                smbd/ipc.o smbd/lanman.o smbd/negprot.o \
 332                smbd/message.o smbd/nttrans.o smbd/pipes.o \
 333                smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
 334                smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
 335                smbd/blocking.o smbd/sec_ctx.o smbd/srvstr.o \
 336                smbd/vfs.o smbd/vfs-wrap.o smbd/statcache.o \
 337                smbd/posix_acls.o lib/sysacls.o lib/server_mutex.o \
 338                smbd/process.o smbd/service.o smbd/error.o \
 339                printing/printfsp.o lib/util_seaccess.o \
 340                smbd/build_options.o \
 341                smbd/change_trust_pw.o \
 342                $(MANGLE_OBJ) @VFS_STATIC@
 343
 344 SMBD_OBJ_BASE = $(PARAM_OBJ) $(SMBD_OBJ_SRV) $(MSDFS_OBJ) $(LIBSMB_OBJ) \
 345                 $(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) $(SECRETS_OBJ) $(UBIQX_OBJ) \
 346                 $(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
 347                 $(LIB_OBJ) $(PRINTBACKEND_OBJ) $(QUOTAOBJS) $(OPLOCK_OBJ) \
 348                 $(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ) \
 349                 $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) \
 350                 $(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(LIBADS_SERVER_OBJ) \
 351                 $(LIB_SMBD_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ) \
 352                 $(IDMAP_OBJ)
 353
 354
 355 PRINTING_OBJ = printing/pcap.o printing/print_svid.o \
 356                                 printing/print_cups.o printing/print_generic.o \
 357                                 printing/lpq_parse.o printing/load.o
 358
 359 PRINTBACKEND_OBJ = printing/printing.o printing/nt_printing.o printing/notify.o \
 360                 printing/printing_db.o
 361
 362 MSDFS_OBJ = msdfs/msdfs.o
 363
 364 SMBD_OBJ = $(SMBD_OBJ_BASE) $(SMBD_OBJ_MAIN)
 365 NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
 366             nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
 367             nmbd/nmbd_browsesync.o nmbd/nmbd_elections.o \
 368             nmbd/nmbd_incomingdgrams.o nmbd/nmbd_incomingrequests.o \
 369             nmbd/nmbd_lmhosts.o nmbd/nmbd_logonnames.o nmbd/nmbd_mynames.o \
 370             nmbd/nmbd_namelistdb.o nmbd/nmbd_namequery.o \
 371             nmbd/nmbd_nameregister.o nmbd/nmbd_namerelease.o \
 372             nmbd/nmbd_nodestatus.o nmbd/nmbd_packets.o \
 373             nmbd/nmbd_processlogon.o nmbd/nmbd_responserecordsdb.o \
 374             nmbd/nmbd_sendannounce.o nmbd/nmbd_serverlistdb.o \
 375             nmbd/nmbd_subnetdb.o nmbd/nmbd_winsproxy.o nmbd/nmbd_winsserver.o \
 376             nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o
 377
 378 NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(UBIQX_OBJ) \
 379            $(PROFILE_OBJ) $(LIB_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 380
 381 WREPL_OBJ1 = wrepld/server.o wrepld/process.o wrepld/parser.o wrepld/socket.o \
 382              wrepld/partners.o
 383
 384 WREPL_OBJ = $(WREPL_OBJ1)  $(PARAM_OBJ) $(UBIQX_OBJ) \
 385             $(PROFILE_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 386
 387 SWAT_OBJ1 = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
 388            web/swat.o web/neg_lang.o
 389
 390 SWAT_OBJ = $(SWAT_OBJ1) $(PARAM_OBJ) $(PRINTING_OBJ) $(LIBSMB_OBJ) \
 391                    $(LOCKING_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(KRBCLIENT_OBJ) \
 392            $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ) \
 393            $(POPT_LIB_OBJ)
 394
 395 SMBSH_OBJ = smbwrapper/smbsh.o smbwrapper/shared.o \
 396             $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 397
 398 STATUS_OBJ = utils/status.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 399              $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 400
 401 SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 402         $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ) \
 403         printing/notify.o printing/printing_db.o
 404
 405 SMBTREE_OBJ = utils/smbtree.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 406              $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(LIBSMB_OBJ) \
 407              $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ)
 408
 409 TESTPARM_OBJ = utils/testparm.o \
 410                $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 411
 412 TESTPRNS_OBJ = utils/testprns.o $(PARAM_OBJ) $(PRINTING_OBJ) $(UBIQX_OBJ) \
 413                $(LIB_OBJ)
 414
 415 SMBPASSWD_OBJ = utils/smbpasswd.o $(PARAM_OBJ) $(SECRETS_OBJ) \
 416                 $(LIBSMB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ)\
 417                 $(UBIQX_OBJ) $(LIB_OBJ) $(KRBCLIENT_OBJ) \
 418                 $(IDMAP_OBJ)
 419
 420 PDBEDIT_OBJ = utils/pdbedit.o $(PARAM_OBJ) $(PASSDB_OBJ) $(LIBSAMBA_OBJ) \
 421                 $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(SECRETS_OBJ) \
 422                 $(POPT_LIB_OBJ) $(IDMAP_OBJ)
 423
 424 SMBGROUPEDIT_OBJ = utils/smbgroupedit.o $(GROUPDB_OBJ) $(PARAM_OBJ) \
 425                 $(LIBSAMBA_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) $(IDMAP_OBJ)
 426
 427 RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
 428                  rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
 429                  rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
 430                  rpcclient/cmd_dfs.o rpcclient/cmd_reg.o \
 431                  rpcclient/display_sec.o rpcclient/cmd_ds.o \
 432                  rpcclient/cmd_echo.o
 433
 434 RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
 435              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 436              $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
 437              $(READLINE_OBJ) $(GROUPDB_OBJ) $(KRBCLIENT_OBJ) \
 438              $(LIBADS_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ) \
 439              $(IDMAP_OBJ)
 440
 441 PAM_WINBIND_OBJ = nsswitch/pam_winbind.po nsswitch/wb_common.po lib/snprintf.po
 442
 443 SMBW_OBJ1 = smbwrapper/smbw.o \
 444                 smbwrapper/smbw_dir.o smbwrapper/smbw_stat.o \
 445                 smbwrapper/realcalls.o smbwrapper/shared.o \
 446                 smbwrapper/smbw_cache.o
 447
 448 SMBW_OBJ = $(SMBW_OBJ1) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(PARAM_OBJ) \
 449                 $(UBIQX_OBJ) $(LIB_OBJ)
 450
 451 SMBWRAPPER_OBJ1 = smbwrapper/wrapped.o
 452
 453 SMBWRAPPER_OBJ = $(SMBW_OBJ) $(SMBWRAPPER_OBJ1)
 454
 455 LIBSMBCLIENT_OBJ = libsmb/libsmbclient.o libsmb/libsmb_compat.o \
 456                    libsmb/libsmb_cache.o $(PARAM_OBJ) $(LIB_OBJ) \
 457                    $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(UBIQX_OBJ)
 458
 459 # This shared library is intended for linking with unit test programs
 460 # to test Samba internals.  It's called libbigballofmud.so to
 461 # discourage casual usage.
 462
 463 LIBBIGBALLOFMUD_MAJOR = 0
 464
 465 LIBBIGBALLOFMUD_OBJ = $(PARAM_OBJ) $(LIB_OBJ) $(UBIQX_OBJ) $(SECRETS_OBJ) \
 466         $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
 467         $(GROUPDB_OBJ) $(KRBCLIENT_OBJ)
 468
 469 LIBBIGBALLOFMUD_PICOBJS = $(LIBBIGBALLOFMUD_OBJ:.o=.po)
 470
 471 CLIENT_OBJ1 = client/client.o client/clitar.o
 472
 473 CLIENT_OBJ = $(CLIENT_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 474              $(LIB_OBJ) $(KRBCLIENT_OBJ) \
 475              $(READLINE_OBJ) $(POPT_LIB_OBJ)
 476
 477 NET_OBJ1 = utils/net.o utils/net_ads.o utils/net_ads_cldap.o utils/net_help.o \
 478            utils/net_rap.o utils/net_rpc.o utils/net_rpc_samsync.o \
 479            utils/net_rpc_join.o utils/net_time.o utils/net_lookup.o \
 480            utils/net_cache.o
 481
 482 NET_OBJ = $(NET_OBJ1) $(PARAM_OBJ) $(SECRETS_OBJ) $(LIBSMB_OBJ) \
 483           $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
 484           $(KRBCLIENT_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 485           $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) \
 486           $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) $(POPT_LIB_OBJ) \
 487           $(IDMAP_OBJ)
 488
 489 CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 490           $(LIB_OBJ) $(KRBCLIENT_OBJ)
 491
 492 MOUNT_OBJ = client/smbmount.o \
 493              $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 494
 495 MNT_OBJ = client/smbmnt.o
 496
 497 UMOUNT_OBJ = client/smbumount.o
 498
 499 NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBNMB_OBJ) \
 500                $(LIB_OBJ) $(POPT_LIB_OBJ)
 501
 502 SMBTORTURE_OBJ1 = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
 503                 torture/denytest.o torture/mangle_test.o
 504
 505 SMBTORTURE_OBJ = $(SMBTORTURE_OBJ1) $(PARAM_OBJ) \
 506         $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 507
 508 MASKTEST_OBJ = torture/masktest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
 509                  $(UBIQX_OBJ) $(LIB_OBJ)
 510
 511 MSGTEST_OBJ = torture/msgtest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
 512                  $(UBIQX_OBJ) $(LIB_OBJ)
 513
 514 LOCKTEST_OBJ = torture/locktest.o $(PARAM_OBJ) $(LOCKING_OBJ) $(KRBCLIENT_OBJ) \
 515                            $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 516
 517 NSSTEST_OBJ = torture/nsstest.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
 518                  $(UBIQX_OBJ) $(LIB_OBJ)
 519
 520 VFSTEST_OBJ = torture/cmd_vfs.o torture/vfstest.o $(SMBD_OBJ_BASE) $(READLINE_OBJ)
 521
 522 VFS_AUDIT_OBJ = modules/vfs_audit.o
 523 VFS_EXTD_AUDIT_OBJ = modules/vfs_extd_audit.o
 524 VFS_RECYCLE_OBJ = modules/vfs_recycle.o
 525 VFS_NETATALK_OBJ = modules/vfs_netatalk.o
 526 VFS_FAKE_PERMS_OBJ = modules/vfs_fake_perms.o
 527
 528 LOCKTEST2_OBJ = torture/locktest2.o $(PARAM_OBJ) $(LOCKING_OBJ) $(LIBSMB_OBJ) \
 529                 $(KRBCLIENT_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 530
 531 SMBCACLS_OBJ = utils/smbcacls.o $(PARAM_OBJ) $(LOCKING_OBJ) $(LIBSMB_OBJ) \
 532                            $(KRBCLIENT_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) $(RPC_PARSE_OBJ) \
 533                            $(PASSDB_GET_SET_OBJ) $(LIBMSRPC_OBJ) $(SECRETS_OBJ) \
 534                            $(POPT_LIB_OBJ)
 535
 536 SMBCQUOTAS_OBJ = utils/smbcquotas.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
 537                 $(PARAM_OBJ) \
 538                 $(UBIQX_OBJ) $(LIB_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ) \
 539                 $(LIBMSRPC_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 540
 541 TALLOCTORT_OBJ = lib/talloctort.o $(PARAM_OBJ) $(LIB_OBJ) $(UBIQX_OBJ)
 542
 543 RPCTORTURE_OBJ = torture/rpctorture.o \
 544              rpcclient/display.o \
 545              rpcclient/cmd_lsarpc.o \
 546              rpcclient/cmd_wkssvc.o \
 547              rpcclient/cmd_samr.o \
 548              rpcclient/cmd_srvsvc.o \
 549              rpcclient/cmd_netlogon.o \
 550              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) $(KRBCLIENT_OBJ) \
 551              $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ)
 552
 553 DEBUG2HTML_OBJ = utils/debug2html.o ubiqx/debugparse.o
 554
 555 SMBFILTER_OBJ = utils/smbfilter.o $(PARAM_OBJ) $(LIBSMB_OBJ) \
 556                  $(UBIQX_OBJ) $(LIB_OBJ) $(KRBCLIENT_OBJ)
 557
 558 PROTO_OBJ = $(SMBD_OBJ_MAIN) \
 559             $(SMBD_OBJ_SRV) $(NMBD_OBJ1) $(SWAT_OBJ1) $(LIB_OBJ) $(LIBSMB_OBJ) \
 560             $(SMBW_OBJ1) $(SMBWRAPPER_OBJ1) $(SMBTORTURE_OBJ1) $(RPCCLIENT_OBJ1) \
 561             $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) $(RPC_CLIENT_OBJ) \
 562             $(RPC_PIPE_OBJ) $(RPC_PARSE_OBJ) $(KRBCLIENT_OBJ) \
 563             $(AUTH_OBJ) $(PARAM_OBJ) $(LOCKING_OBJ) $(SECRETS_OBJ) \
 564             $(PRINTING_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) $(NOTIFY_OBJ) \
 565             $(QUOTAOBJS) $(PASSDB_OBJ) $(GROUPDB_OBJ) $(MSDFS_OBJ) \
 566             $(READLINE_OBJ) $(PROFILE_OBJ) $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
 567             $(LIB_SMBD_OBJ) $(SAM_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ) \
 568             $(RPC_LSA_OBJ) $(RPC_NETLOG_OBJ) $(RPC_SAMR_OBJ) $(RPC_REG_OBJ) \
 569             $(RPC_SVC_OBJ) $(RPC_WKS_OBJ) $(RPC_DFS_OBJ) $(RPC_SPOOLSS_OBJ) \
 570             $(IDMAP_OBJ) $(RPC_ECHO_OBJ)
 571
 572 NSS_OBJ_0 = nsswitch/wins.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBSMB_OBJ) \
 573             $(LIB_OBJ) $(NSSWINS_OBJ)
 574
 575 NSS_OBJ = $(NSS_OBJ_0:.o=.po)
 576
 577 PICOBJS = $(SMBWRAPPER_OBJ:.o=.po)
 578 PICOBJS32 = $(SMBWRAPPER_OBJ:.o=.po32)
 579 LIBSMBCLIENT_PICOBJS = $(LIBSMBCLIENT_OBJ:.o=.po)
 580
 581 PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
 582                pam_smbpass/pam_smb_acct.o pam_smbpass/support.o \
 583                libsmb/smbencrypt.o libsmb/smbdes.o libsmb/nterr.o \
 584                $(PARAM_OBJ) $(LIB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
 585                $(SECRETS_OBJ) $(UBIQX_OBJ)
 586
 587 PAM_SMBPASS_PICOOBJ = $(PAM_SMBPASS_OBJ_0:.o=.po)
 588
 589 WINBINDD_OBJ1 = \
 590                 nsswitch/winbindd.o       \
 591                 nsswitch/winbindd_user.o  \
 592                 nsswitch/winbindd_group.o \
 593                 nsswitch/winbindd_idmap.o \
 594                 nsswitch/winbindd_idmap_tdb.o \
 595                 nsswitch/winbindd_idmap_ldap.o \
 596                 nsswitch/winbindd_util.o  \
 597                 nsswitch/winbindd_cache.o \
 598                 nsswitch/winbindd_pam.o   \
 599                 nsswitch/winbindd_sid.o   \
 600                 nsswitch/winbindd_misc.o  \
 601                 nsswitch/winbindd_cm.o \
 602                 nsswitch/winbindd_wins.o \
 603                 nsswitch/winbindd_rpc.o \
 604                 nsswitch/winbindd_ads.o \
 605                 nsswitch/winbindd_dual.o
 606
 607 WINBINDD_OBJ = \
 608                 $(WINBINDD_OBJ1) $(PASSDB_GET_SET_OBJ) \
 609                 $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 610                 $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) \
 611                 $(PROFILE_OBJ) $(UNIGRP_OBJ) $(IDMAP_OBJ) \
 612                 $(SECRETS_OBJ) $(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ) @LDAP_OBJ@
 613
 614 WBINFO_OBJ = nsswitch/wbinfo.o libsmb/smbencrypt.o libsmb/smbdes.o $(POPT_LIB_OBJ)
 615
 616 WINBIND_NSS_OBJ = nsswitch/wb_common.o @WINBIND_NSS_EXTRA_OBJS@
 617
 618 WINBIND_NSS_PICOBJS = $(WINBIND_NSS_OBJ:.o=.po)
 619
 620 POPT_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
 621           popt/popthelp.o popt/poptparse.o
 622
 623 TDBBACKUP_OBJ = tdb/tdbbackup.o $(TDBBASE_OBJ)
 624
 625 NTLM_AUTH_OBJ = utils/ntlm_auth.o $(LIBNTLMSSP_OBJ) $(LIBSAMBA_OBJ) $(POPT_LIB_OBJ)
 626
 627 ######################################################################
 628 # now the rules...
 629 ######################################################################
 630 all : SHOWFLAGS proto_exists $(SBIN_PROGS) $(BIN_PROGS) $(SHLIBS) \
 631         $(TORTURE_PROGS) $(MODULES) @EXTRA_ALL_TARGETS@
 632
 633 pam_smbpass : SHOWFLAGS bin/pam_smbpass.@SHLIBEXT@
 634
 635 smbwrapper : SHOWFLAGS @SMBWRAPPER@
 636
 637 torture : SHOWFLAGS $(TORTURE_PROGS)
 638
 639 smbtorture : SHOWFLAGS bin/smbtorture@EXEEXT@
 640
 641 masktest : SHOWFLAGS bin/masktest@EXEEXT@
 642
 643 msgtest : SHOWFLAGS bin/msgtest@EXEEXT@
 644
 645 locktest : SHOWFLAGS bin/locktest@EXEEXT@
 646
 647 smbcacls : SHOWFLAGS bin/smbcacls@EXEEXT@
 648
 649 smbcquotas : SHOWFLAGS bin/smbcquotas@EXEEXT@
 650
 651 locktest2 : SHOWFLAGS bin/locktest2@EXEEXT@
 652
 653 rpctorture : SHOWFLAGS bin/rpctorture@EXEEXT@
 654
 655 debug2html : SHOWFLAGS bin/debug2html@EXEEXT@
 656
 657 smbfilter : SHOWFLAGS bin/smbfilter@EXEEXT@
 658
 659 talloctort : SHOWFLAGS bin/talloctort@EXEEXT@
 660
 661 nsswitch : SHOWFLAGS bin/winbindd@EXEEXT@ bin/wbinfo@EXEEXT@ nsswitch/@WINBIND_NSS@.@SHLIBEXT@ nsswitch/pam_winbind.@SHLIBEXT@
 662
 663 wins : SHOWFLAGS nsswitch/libnss_wins.@SHLIBEXT@
 664
 665 modules: SHOWFLAGS proto_exists $(MODULES)
 666
 667 everything: all libsmbclient debug2html smbfilter talloctort
 668
 669 .SUFFIXES:
 670 .SUFFIXES: .c .o .po .po32 .lo
 671
 672 SHOWFLAGS:
 673         @echo "Using FLAGS = $(FLAGS)"
 674         @echo "      FLAGS32 = $(FLAGS32)"
 675         @echo "      LIBS = $(LIBS)"
 676         @echo "      LDSHFLAGS = $(LDSHFLAGS)"
 677         @echo "      LDFLAGS = $(LDFLAGS)"
 678
 679 MAKEDIR = || exec false; \
 680           if test -d "$$dir"; then :; else \
 681           echo mkdir "$$dir"; \
 682           mkdir -p "$$dir" >/dev/null 2>&1 || \
 683           test -d "$$dir" || \
 684           mkdir "$$dir" || \
 685           exec false; fi || exec false
 686
 687 .c.o:
 688         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 689          dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 690         @echo Compiling $*.c
 691         @$(CC) -I. -I$(srcdir) $(FLAGS) -c $< \
 692           -o $@
 693 @BROKEN_CC@     -mv `echo $@ | sed 's%^.*/%%g'` $@
 694
 695 # These dependencies are only approximately correct: we want to make
 696 # sure Samba's paths are updated if ./configure is re-run.  Really it
 697 # would be nice if "make prefix=/opt/samba all" also rebuilt things,
 698 # but since we also require "make install prefix=/opt/samba" *not* to
 699 # rebuild it's a bit hard.
 700
 701 dynconfig.o: dynconfig.c Makefile
 702         @$(MAKE) modules_clean
 703         @echo Compiling $*.c
 704         @$(CC) $(FLAGS) $(PATH_FLAGS) -c $< -o $@
 705
 706 dynconfig.po: dynconfig.c Makefile
 707         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 708           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 709         @echo Compiling $*.c with @PICFLAG@
 710         @$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
 711 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
 712 @POBAD_CC@      @mv $*.po.o $@
 713
 714 .c.po:
 715         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 716           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 717         @echo Compiling $*.c with @PICFLAG@
 718         @$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
 719 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
 720 @POBAD_CC@      @mv $*.po.o $@
 721
 722 # this is for IRIX
 723 .c.po32:
 724         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 725           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 726         @echo Compiling $*.c with @PICFLAG@ and -32
 727         @$(CC) -32 -I. -I$(srcdir) $(FLAGS32) $(PATH_FLAGS) @PICFLAG@ -c $< \
 728           -o $*.po32.o
 729 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po32$$%.o%'` $@.o
 730         @mv $*.po32.o $@
 731
 732 bin/.dummy:
 733         @if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
 734           dir=bin $(MAKEDIR); fi
 735         @: >> $@ || : > $@ # what a fancy emoticon!
 736
 737 bin/smbd@EXEEXT@: $(SMBD_OBJ) @BUILD_POPT@ bin/.dummy
 738         @echo Linking $@
 739         @$(CC) $(FLAGS) -o $@ $(SMBD_OBJ) $(ADSLIBS) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) \
 740           $(AUTHLIBS) $(ACLLIBS) $(PASSDBLIBS) $(LIBS) @POPTLIBS@
 741
 742 bin/nmbd@EXEEXT@: $(NMBD_OBJ) @BUILD_POPT@ bin/.dummy
 743         @echo Linking $@
 744         @$(CC) $(FLAGS) -o $@ $(NMBD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@ $(KRB5LIBS)
 745
 746 bin/wrepld@EXEEXT@: $(WREPL_OBJ) @BUILD_POPT@ bin/.dummy
 747         @echo Linking $@
 748         @$(CC) $(FLAGS) -o $@ $(WREPL_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@
 749
 750 bin/swat@EXEEXT@: $(SWAT_OBJ) @BUILD_POPT@ bin/.dummy
 751         @echo Linking $@
 752         @$(CC) $(FLAGS) -o $@ $(SWAT_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) \
 753           $(AUTHLIBS) $(LIBS) $(PASSDBLIBS)  @POPTLIBS@ $(KRB5LIBS)
 754
 755 bin/rpcclient@EXEEXT@: $(RPCCLIENT_OBJ) @BUILD_POPT@ bin/.dummy
 756         @echo Linking $@
 757         @$(CC) $(FLAGS) -o $@ $(PASSDBLIBS) $(RPCCLIENT_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @POPTLIBS@ $(ADSLIBS)
 758
 759 bin/smbclient@EXEEXT@: $(CLIENT_OBJ) @BUILD_POPT@ bin/.dummy
 760         @echo Linking $@
 761         @$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @POPTLIBS@ $(KRB5LIBS)
 762
 763 bin/net@EXEEXT@: $(NET_OBJ) @BUILD_POPT@ bin/.dummy
 764         @echo Linking $@
 765         @$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(ADSLIBS)
 766
 767 bin/profiles@EXEEXT@: $(PROFILES_OBJ) @BUILD_POPT@ bin/.dummy
 768         @echo Linking $@
 769         @$(CC) $(FLAGS) -o $@ $(PROFILES_OBJ) $(LDFLAGS) $(LIBS) @POPTLIBS@
 770
 771 bin/editreg@EXEEXT@: $(EDITREG_OBJ) @BUILD_POPT@ bin/.dummy
 772         @echo Linking $@
 773         @$(CC) $(FLAGS) -o $@ $(EDITREG_OBJ) $(LDFLAGS) $(LIBS) @POPTLIBS@
 774
 775 bin/smbspool@EXEEXT@: $(CUPS_OBJ) bin/.dummy
 776         @echo Linking $@
 777         @$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 778
 779 bin/smbmount@EXEEXT@: $(MOUNT_OBJ) bin/.dummy
 780         @echo Linking $@
 781         @$(CC) $(FLAGS) -o $@ $(MOUNT_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 782
 783 bin/smbmnt@EXEEXT@: $(MNT_OBJ) bin/.dummy
 784         @echo Linking $@
 785         @$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(LDFLAGS)
 786
 787 bin/smbumount@EXEEXT@: $(UMOUNT_OBJ) bin/.dummy
 788         @echo Linking $@
 789         @$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(LDFLAGS)
 790
 791 bin/testparm@EXEEXT@: $(TESTPARM_OBJ) @BUILD_POPT@ bin/.dummy
 792         @echo Linking $@
 793         @$(CC) $(FLAGS) -o $@ $(TESTPARM_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@
 794
 795 bin/testprns@EXEEXT@: $(TESTPRNS_OBJ) bin/.dummy
 796         @echo Linking $@
 797         @$(CC) $(FLAGS) -o $@ $(TESTPRNS_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) $(LIBS)
 798
 799 bin/smbstatus@EXEEXT@: $(STATUS_OBJ) @BUILD_POPT@ bin/.dummy
 800         @echo Linking $@
 801         @$(CC) $(FLAGS) -o $@ $(STATUS_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@
 802
 803 bin/smbcontrol@EXEEXT@: $(SMBCONTROL_OBJ) @BUILD_POPT@ bin/.dummy
 804         @echo Linking $@
 805         @$(CC) -DUSING_SMBCONTROL $(FLAGS) -o $@ $(SMBCONTROL_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@
 806
 807 bin/smbtree@EXEEXT@: $(SMBTREE_OBJ) @BUILD_POPT@ bin/.dummy
 808         @echo Linking $@
 809         @$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@ $(KRB5LIBS)
 810
 811 bin/smbpasswd@EXEEXT@: $(SMBPASSWD_OBJ) bin/.dummy
 812         @echo Linking $@
 813         @$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(PASSDBLIBS) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS)
 814
 815 bin/pdbedit@EXEEXT@: $(PDBEDIT_OBJ) @BUILD_POPT@ bin/.dummy
 816         @echo Linking $@
 817         @$(CC) $(FLAGS) -o $@ $(PASSDBLIBS) $(PDBEDIT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@
 818
 819 bin/samtest@EXEEXT@: $(SAMTEST_OBJ) @BUILD_POPT@ bin/.dummy
 820         @echo Linking $@
 821         @$(CC) $(FLAGS) -o $@ $(SAMTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(LIBS) @POPTLIBS@ $(PASSDBLIBS) $(ADSLIBS)
 822
 823 bin/smbgroupedit@EXEEXT@: $(SMBGROUPEDIT_OBJ) bin/.dummy
 824         @echo Linking $@
 825         @$(CC) $(FLAGS) -o $@ $(SMBGROUPEDIT_OBJ) $(PASSDBLIBS) $(LDFLAGS) $(DYNEXP) $(LIBS)
 826
 827 bin/nmblookup@EXEEXT@: $(NMBLOOKUP_OBJ) @BUILD_POPT@ bin/.dummy
 828         @echo Linking $@
 829         @$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @POPTLIBS@
 830
 831 bin/smbtorture@EXEEXT@: $(SMBTORTURE_OBJ) bin/.dummy
 832         @echo Linking $@
 833         @$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) $(KRB5LIBS)
 834
 835 bin/talloctort@EXEEXT@: $(TALLOCTORT_OBJ) bin/.dummy
 836         @echo Linking $@
 837         @$(CC) $(FLAGS) -o $@ $(TALLOCTORT_OBJ) $(LDFLAGS) $(LIBS)
 838
 839 bin/masktest@EXEEXT@: $(MASKTEST_OBJ) bin/.dummy
 840         @echo Linking $@
 841         @$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 842
 843 bin/msgtest@EXEEXT@: $(MSGTEST_OBJ) bin/.dummy
 844         @echo Linking $@
 845         @$(CC) $(FLAGS) -o $@ $(MSGTEST_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 846
 847 bin/smbcacls@EXEEXT@: $(SMBCACLS_OBJ) @BUILD_POPT@ bin/.dummy
 848         @echo Linking $@
 849         @$(CC) $(FLAGS) -o $@ $(SMBCACLS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(KRB5LIBS)
 850
 851 bin/smbcquotas@EXEEXT@: $(SMBCQUOTAS_OBJ) @BUILD_POPT@ bin/.dummy
 852         @echo Linking $@
 853         @$(CC) $(FLAGS) -o $@ $(SMBCQUOTAS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @POPTLIBS@ $(KRB5LIBS)
 854
 855 bin/locktest@EXEEXT@: $(LOCKTEST_OBJ) bin/.dummy
 856         @echo Linking $@
 857         @$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 858
 859 bin/nsstest@EXEEXT@: $(NSSTEST_OBJ) bin/.dummy
 860         @echo Linking $@
 861         @$(CC) $(FLAGS) -o $@ $(NSSTEST_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 862
 863 bin/vfstest@EXEEXT@: $(VFSTEST_OBJ) @BUILD_POPT@ bin/.dummy
 864         @echo Linking $@
 865         @$(CC) $(FLAGS) -o $@ $(VFSTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(PRINTLIBS) $(AUTHLIBS) $(ACLLIBS) $(LIBS) @POPTLIBS@ $(ADSLIBS)
 866
 867 bin/locktest2@EXEEXT@: $(LOCKTEST2_OBJ) bin/.dummy
 868         @echo Linking $@
 869         @$(CC) $(FLAGS) -o $@ $(LOCKTEST2_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 870
 871 bin/rpctorture@EXEEXT@: $(RPCTORTURE_OBJ) bin/.dummy
 872         @echo Linking $@
 873         @$(CC) $(FLAGS) -o $@ $(RPCTORTURE_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 874
 875 bin/debug2html@EXEEXT@: $(DEBUG2HTML_OBJ) bin/.dummy
 876         @echo Linking $@
 877         @$(CC) $(FLAGS) -o $@ $(DEBUG2HTML_OBJ) $(LDFLAGS) $(LIBS)
 878
 879 bin/smbfilter@EXEEXT@: $(SMBFILTER_OBJ) bin/.dummy
 880         @echo Linking $@
 881         @$(CC) $(FLAGS) -o $@ $(SMBFILTER_OBJ) $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 882
 883 bin/smbw_sample@EXEEXT@: $(SMBW_OBJ) utils/smbw_sample.o bin/.dummy
 884         @echo Linking $@
 885         @$(CC) $(FLAGS) -o $@ $(SMBW_OBJ) utils/smbw_sample.o $(LDFLAGS) $(LIBS) $(KRB5LIBS)
 886
 887 bin/smbsh@EXEEXT@: $(SMBSH_OBJ) bin/.dummy
 888         @echo Linking $@
 889         @$(CC) $(FLAGS) -o $@ $(SMBSH_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
 890
 891 bin/smbwrapper.@SHLIBEXT@: $(PICOBJS) bin/.dummy
 892         @echo Linking shared library $@
 893         @$(SHLD) $(LDSHFLAGS) -o $@ $(PICOBJS) $(LIBS) \
 894                 @SONAMEFLAG@`basename $@` $(KRB5LIBS)
 895
 896 bin/smbwrapper.32.@SHLIBEXT@: $(PICOBJS32)
 897         @echo Linking shared library $@
 898         @$(SHLD) -32 $(LDSHFLAGS) -o $@ $(PICOBJS32) $(LIBS) \
 899                 @SONAMEFLAG@`basename $@` $(KRB5LIBS)
 900
 901 bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS)
 902         @echo Linking libsmbclient shared library $@
 903         @$(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \
 904         $(KRB5LIBS) @SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR)
 905
 906 bin/libsmbclient.a: $(LIBSMBCLIENT_PICOBJS)
 907         @echo Linking libsmbclient non-shared library $@
 908         @-$(AR) -rc $@ $(LIBSMBCLIENT_PICOBJS)
 909
 910 bin/libbigballofmud.@SHLIBEXT@: $(LIBBIGBALLOFMUD_PICOBJS)
 911         @echo Linking bigballofmud shared library $@
 912         @$(SHLD) $(LDSHFLAGS) -o $@ $(LIBBIGBALLOFMUD_PICOBJS) $(LIBS) \
 913                 @SONAMEFLAG@`basename $@`.$(LIBBIGBALLOFMUD_MAJOR) $(PASSDBLIBS) $(ADSLIBS)
 914
 915 # It would be nice to build a static bigballofmud too, but when I try
 916 # I get linker errors about dl_open and similar things.  I'm not sure
 917 # if it can be fixed or if they just can't be called from a static
 918 # library.
 919
 920 libsmbclient: $(LIBSMBCLIENT)
 921
 922 bin/librpc_lsarpc.@SHLIBEXT@: $(RPC_LSA_OBJ)
 923         @echo "Linking $@"
 924         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_LSA_OBJ) -lc \
 925                 @SONAMEFLAG@`basename $@`
 926
 927 bin/librpc_samr.@SHLIBEXT@: $(RPC_SAMR_OBJ)
 928         @echo "Linking $@"
 929         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SAMR_OBJ) -lc \
 930                 @SONAMEFLAG@`basename $@`
 931
 932 bin/librpc_srvsvc.@SHLIBEXT@: $(RPC_SVC_OBJ)
 933         @echo "Linking $@"
 934         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SVC_OBJ) -lc \
 935                 @SONAMEFLAG@`basename $@`
 936
 937 bin/librpc_wkssvc.@SHLIBEXT@: $(RPC_WKS_OBJ)
 938         @echo "Linking $@"
 939         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_WKS_OBJ) -lc \
 940                 @SONAMEFLAG@`basename $@`
 941
 942 bin/librpc_NETLOGON.@SHLIBEXT@: $(RPC_NETLOG_OBJ)
 943         @echo "Linking $@"
 944         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_NETLOG_OBJ) -lc \
 945                 @SONAMEFLAG@`basename $@`
 946
 947 bin/librpc_winreg.@SHLIBEXT@: $(RPC_REG_OBJ)
 948         @echo "Linking $@"
 949         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_REG_OBJ) -lc \
 950                 @SONAMEFLAG@`basename $@`
 951
 952 bin/librpc_spoolss.@SHLIBEXT@: $(RPC_SPOOLSS_OBJ)
 953         @echo "Linking $@"
 954         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SPOOLSS_OBJ) -lc \
 955                 @SONAMEFLAG@`basename $@`
 956
 957 bin/librpc_netdfs.@SHLIBEXT@: $(RPC_DFS_OBJ)
 958         @echo "Linking $@"
 959         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_DFS_OBJ) -lc \
 960                 @SONAMEFLAG@`basename $@`
 961
 962 bin/librpc_echo.@SHLIBEXT@: $(RPC_ECHO_OBJ)
 963         @echo "Linking $@"
 964         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_ECHO_OBJ) -lc \
 965                 @SONAMEFLAG@`basename $@`
 966
 967 nsswitch/libnss_wins.@SHLIBEXT@: $(NSS_OBJ)
 968         @echo "Linking $@"
 969         @$(SHLD) $(LDSHFLAGS) -o $@ $(NSS_OBJ) -lc \
 970                 @SONAMEFLAG@`basename $@`
 971
 972 bin/winbindd@EXEEXT@: $(WINBINDD_OBJ) @BUILD_POPT@ bin/.dummy
 973         @echo Linking $@
 974         @$(LINK) -o $@ $(WINBINDD_OBJ) $(DYNEXP) $(LIBS) @POPTLIBS@ $(ADSLIBS) \
 975                 @LDAP_LIBS@
 976
 977 nsswitch/@WINBIND_NSS@.@SHLIBEXT@: $(WINBIND_NSS_PICOBJS)
 978         @echo "Linking $@"
 979         @$(SHLD) $(WINBIND_NSS_LDSHFLAGS) -o $@ $(WINBIND_NSS_PICOBJS) \
 980                 @WINBIND_NSS_EXTRA_LIBS@ @SONAMEFLAG@`basename $@`
 981
 982 nsswitch/pam_winbind.@SHLIBEXT@: $(PAM_WINBIND_OBJ) bin/.dummy
 983         @echo Linking $@
 984         @$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ) \
 985                 @SONAMEFLAG@`basename $@` -lpam
 986
 987 bin/rhosts.@SHLIBEXT@: $(AUTH_RHOSTS_OBJ)
 988         @echo "Building plugin $@"
 989         @$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_RHOSTS_OBJ) @SONAMEFLAG@`basename $@`
 990
 991 bin/builtin.@SHLIBEXT@: $(AUTH_BUILTIN_OBJ)
 992         @echo "Building plugin $@"
 993         @$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_BUILTIN_OBJ) @SONAMEFLAG@`basename $@`
 994
 995 bin/domain.@SHLIBEXT@: $(AUTH_DOMAIN_OBJ)
 996         @echo "Building plugin $@"
 997         @$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_DOMAIN_OBJ) @SONAMEFLAG@`basename $@`
 998
 999 bin/server.@SHLIBEXT@: $(AUTH_SERVER_OBJ)
1000         @echo "Building plugin $@"
1001         @$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_SERVER_OBJ) @SONAMEFLAG@`basename $@`
1002
1003 bin/winbind.@SHLIBEXT@: $(AUTH_WINBIND_OBJ)
1004         @echo "Building plugin $@"
1005         @$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_WINBIND_OBJ) @SONAMEFLAG@`basename $@`
1006
1007 bin/unix.@SHLIBEXT@: $(AUTH_UNIX_OBJ)
1008         @echo "Building plugin $@"
1009         @$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_UNIX_OBJ) @SONAMEFLAG@`basename $@`
1010
1011 bin/sam.@SHLIBEXT@: $(AUTH_SAM_OBJ)
1012         @echo "Building plugin $@"
1013         @$(SHLD) $(LDSHFLAGS) -o $@ $(AUTH_SAM_OBJ) @SONAMEFLAG@`basename $@`
1014
1015 bin/mysql.@SHLIBEXT@: $(MYSQL_OBJ)
1016         @echo "Building plugin $@"
1017         @$(SHLD) $(LDSHFLAGS) -o $@ $(MYSQL_OBJ) @MYSQL_LIBS@ \
1018                 @SONAMEFLAG@`basename $@`
1019
1020 bin/ldapsam.@SHLIBEXT@: passdb/pdb_ldap.o
1021         @echo "Building plugin $@"
1022         @$(SHLD) $(LDSHFLAGS) @LDAP_LIBS@ -o $@ passdb/pdb_ldap.o \
1023                 @SONAMEFLAG@`basename $@`
1024
1025 bin/tdbsam.@SHLIBEXT@: passdb/pdb_tdb.o
1026         @echo "Building plugin $@"
1027         @$(SHLD) $(LDSHFLAGS) -o $@ passdb/pdb_tdb.o \
1028                 @SONAMEFLAG@`basename $@`
1029
1030 bin/smbpasswd.@SHLIBEXT@: passdb/pdb_smbpasswd.o
1031         @echo "Building plugin $@"
1032         @$(SHLD) $(LDSHFLAGS) -o $@ passdb/pdb_smbpasswd.o \
1033                 @SONAMEFLAG@`basename $@`
1034
1035 bin/unixsam.@SHLIBEXT@: passdb/pdb_unix.o
1036         @echo "Building plugin $@"
1037         @$(SHLD) $(LDSHFLAGS) -o $@ passdb/pdb_unix.o \
1038                 @SONAMEFLAG@`basename $@`
1039
1040 bin/nisplussam.@SHLIBEXT@: passdb/pdb_nisplus.o
1041         @echo "Building plugin $@"
1042         @$(SHLD) $(LDSHFLAGS) -o $@ passdb/pdb_nisplus.o \
1043                 @SONAMEFLAG@`basename $@`
1044
1045 bin/weird.@SHLIBEXT@: $(DEVEL_HELP_OBJ)
1046         @echo "Building plugin $@"
1047         @$(SHLD) $(LDSHFLAGS) -o $@ $(DEVEL_HELP_OBJ) \
1048                 @SONAMEFLAG@`basename $@`
1049
1050 bin/xml.@SHLIBEXT@: $(XML_OBJ)
1051         @echo "Building plugin $@"
1052         @$(SHLD) $(LDSHFLAGS) -o $@ $(XML_OBJ) @XML_LIBS@ \
1053                 @SONAMEFLAG@`basename $@`
1054
1055 bin/audit.@SHLIBEXT@: $(VFS_AUDIT_OBJ)
1056         @echo "Building plugin $@"
1057         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_AUDIT_OBJ) \
1058                 @SONAMEFLAG@`basename $@`
1059
1060 bin/extd_audit.@SHLIBEXT@: $(VFS_EXTD_AUDIT_OBJ)
1061         @echo "Building plugin $@"
1062         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_EXTD_AUDIT_OBJ) \
1063                 @SONAMEFLAG@`basename $@`
1064
1065 bin/recycle.@SHLIBEXT@: $(VFS_RECYCLE_OBJ)
1066         @echo "Building plugin $@"
1067         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_RECYCLE_OBJ) \
1068                 @SONAMEFLAG@`basename $@`
1069
1070 bin/netatalk.@SHLIBEXT@: $(VFS_NETATALK_OBJ)
1071         @echo "Building plugin $@"
1072         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_NETATALK_OBJ) \
1073                 @SONAMEFLAG@`basename $@`
1074
1075 bin/fake_perms.@SHLIBEXT@: $(VFS_FAKE_PERMS_OBJ)
1076         @echo "Building plugin $@"
1077         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_FAKE_PERMS_OBJ) \
1078                 @SONAMEFLAG@`basename $@`
1079
1080 bin/wbinfo@EXEEXT@: $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
1081                 $(UBIQX_OBJ) $(SECRETS_OBJ) @BUILD_POPT@ bin/.dummy
1082         @echo Linking $@
1083         @$(LINK) -o $@ $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
1084                 $(UBIQX_OBJ) $(SECRETS_OBJ) $(LIBS) @POPTLIBS@
1085
1086 bin/ntlm_auth@EXEEXT@: $(NTLM_AUTH_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
1087                 $(UBIQX_OBJ) @BUILD_POPT@ bin/.dummy
1088         @echo Linking $@
1089         @$(LINK) -o $@ $(NTLM_AUTH_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
1090                 $(UBIQX_OBJ) $(LIBS) @POPTLIBS@
1091
1092 bin/pam_smbpass.@SHLIBEXT@: $(PAM_SMBPASS_PICOOBJ)
1093         @echo "Linking shared library $@"
1094         @$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(DYNEXP) $(LIBS) -lc
1095
1096 bin/libmsrpc.a: $(LIBMSRPC_PICOBJ)
1097         @-$(AR) -rc $@ $(LIBMSRPC_PICOBJ)
1098
1099 bin/tdbbackup@EXEEXT@: $(TDBBACKUP_OBJ) bin/.dummy
1100         @echo Linking $@
1101         @$(CC) $(FLAGS) -o $@ $(TDBBACKUP_OBJ)
1102
1103 bin/t_strcmp@EXEEXT@: bin/libbigballofmud.@SHLIBEXT@ torture/t_strcmp.o
1104         $(CC) $(FLAGS) -o $@ $(LIBS) torture/t_strcmp.o -L ./bin -lbigballofmud
1105
1106 bin/t_stringoverflow@EXEEXT@: bin/libbigballofmud.@SHLIBEXT@ torture/t_stringoverflow.o
1107         $(CC) $(FLAGS) -o $@ torture/t_stringoverflow.o -L./bin -lbigballofmud
1108
1109 bin/t_doschar@EXEEXT@: bin/libbigballofmud.@SHLIBEXT@ torture/t_doschar.o
1110         $(CC) $(FLAGS) -o $@ $(LIBS) torture/t_doschar.o -L ./bin -lbigballofmud
1111
1112 bin/t_push_ucs2@EXEEXT@: bin/libbigballofmud.@SHLIBEXT@ torture/t_push_ucs2.o
1113         $(CC) $(FLAGS) -o $@ $(LIBS) torture/t_push_ucs2.o -L ./bin -lbigballofmud
1114
1115 install: installbin installman installscripts installdat installswat installmodules installclientlib
1116
1117 # DESTDIR is used here to prevent packagers wasting their time
1118 # duplicating the Makefile. Remove it and you will have the privelege
1119 # of package each samba release for muliple versions of multiple
1120 # distributions and operating systems, or at least supplying patches
1121 # to all the packaging files required for this, prior to committing
1122 # the removal of DESTDIR. Do not remove it even though you think it
1123 # is not used
1124
1125 installdirs:
1126         @$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(PRIVATEDIR) $(DESTDIR)$(VFSLIBDIR) $(DESTDIR)$(PDBLIBDIR) $(DESTDIR)$(PIDDIR) $(DESTDIR)$(LOCKDIR)
1127
1128 installservers: all installdirs
1129         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
1130
1131 installbin: all installdirs
1132         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
1133         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(BIN_PROGS)
1134
1135
1136 installmodules: all modules installdirs
1137         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(VFSLIBDIR) $(VFS_MODULES)
1138         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(PDBLIBDIR) $(PDB_MODULES)
1139         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(RPCLIBDIR) $(RPC_MODULES)
1140         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(CHARSETLIBDIR) $(CHARSET_MODULES)
1141         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(AUTHLIBDIR) $(AUTH_MODULES)
1142
1143 installscripts: installdirs
1144         @$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
1145
1146 installdat: installdirs
1147         @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir)
1148
1149 installswat: installdirs
1150         @$(SHELL) $(srcdir)/script/installswat.sh $(DESTDIR)$(SWATDIR) $(srcdir)
1151
1152 installclientlib: libsmbclient
1153         -$(INSTALLCLIENTCMD_SH) bin/libsmbclient.@SHLIBEXT@ $(DESTDIR)${prefix}/lib
1154         -$(INSTALLCLIENTCMD_A) bin/libsmbclient.a $(DESTDIR)${prefix}/lib
1155         @$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)${prefix}/include
1156         -$(INSTALLCMD) $(srcdir)/include/libsmbclient.h $(DESTDIR)${prefix}/include
1157
1158 # Python extensions
1159
1160 PYTHON_OBJS = $(PARAM_OBJ) $(LIB_OBJ) $(LIBSMB_OBJ) $(RPC_PARSE_OBJ) \
1161         $(UBIQX_OBJ) $(LIBMSRPC_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
1162         $(SECRETS_OBJ) $(KRBCLIENT_OBJ)
1163
1164 python_ext: $(PYTHON_OBJS)
1165         @if test -z "$(PYTHON)"; then \
1166                 echo Use the option --with-python to configure python; \
1167                 exit 1; fi
1168         PYTHON_OBJS="$(PYTHON_OBJS)" PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS) $(FLAGS)" \
1169         LIBS="$(LIBS) $(PASSDBLIBS) $(KRB5LIBS)" \
1170                 $(PYTHON) python/setup.py build
1171
1172 python_install: $(PYTHON_OBJS)
1173         @if test -z "$(PYTHON)"; then \
1174                 echo Use the option --with-python to configure python; \
1175                 exit 1; fi
1176         PYTHON_OBJS="$(PYTHON_OBJS)" PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS)" \
1177         LIBS="$(LIBS)" \
1178                 $(PYTHON) python/setup.py install
1179
1180 python_clean:
1181         @-if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi
1182
1183 # revert to the previously installed version
1184 revert:
1185         @$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS)
1186         @$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(BIN_PROGS) $(SCRIPTS)
1187
1188 installman:
1189         @$(SHELL) $(srcdir)/script/installman.sh $(DESTDIR)$(MANDIR) $(srcdir) $(man_langs) "@ROFF@"
1190
1191 .PHONY: showlayout
1192
1193 showlayout:
1194         @echo "Samba will be installed into:"
1195         @echo "  basedir: $(BASEDIR)"
1196         @echo "  bindir:  $(BINDIR)"
1197         @echo "  sbindir: $(SBINDIR)"
1198         @echo "  libdir:  $(LIBDIR)"
1199         @echo "  vardir:  $(VARDIR)"
1200         @echo "  mandir:  $(MANDIR)"
1201
1202
1203 uninstall: uninstallman uninstallbin uninstallscripts
1204
1205 uninstallman:
1206         @$(SHELL) $(srcdir)/script/uninstallman.sh $(DESTDIR)$(MANDIR) $(srcdir) $(man_langs)
1207
1208 uninstallbin:
1209         @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(SBIN_PROGS)
1210         @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(BIN_PROGS)
1211
1212 uninstallmodules:
1213         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(VFSLIBDIR) $(DESTDIR)$(VFS_MODULES)
1214         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(PDBLIBDIR) $(DESTDIR)$(PDB_MODULES)
1215         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(RPCLIBDIR) $(DESTDIR)$(RPC_MODULES)
1216         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(CHARSETLIBDIR) $(DESTDIR)$(CHARSET_MODULES)
1217         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(AUTHLIBDIR) $(DESTDIR)$(AUTH_MODULES)
1218
1219 uninstallscripts:
1220         @$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
1221
1222 # Toplevel clean files
1223 TOPFILES=dynconfig.o dynconfig.po
1224
1225 clean: delheaders python_clean
1226         -rm -f core */*~ *~ */*.o */*.po */*.po32 */*.@SHLIBEXT@ \
1227                 $(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(MODULES) $(TORTURE_PROGS) \
1228                 $(LIBSMBCLIENT) $(EVERYTHING_PROGS) .headers.stamp
1229
1230 # This is quite ugly actually.. But we need to make
1231 # sure the changes to include/config.h are used.
1232 modules_clean:
1233         @-rm -f @MODULES_CLEAN@ auth/auth.o passdb/pdb_interface.o rpc_server/srv_pipe_hnd.o lib/iconv.o smbd/vfs.o
1234
1235 # Making this target will just make sure that the prototype files
1236 # exist, not necessarily that they are up to date.  Since they're
1237 # removed by "make clean" this will always be run when you do anything
1238 # afterwards.
1239 proto_exists: include/proto.h include/wrepld_proto.h include/build_env.h \
1240         nsswitch/winbindd_proto.h web/swat_proto.h \
1241         client/client_proto.h utils/net_proto.h \
1242         include/tdbsam2_parse_info.h
1243
1244 delheaders:
1245         @echo Removing prototype headers
1246         @/bin/rm -f $(srcdir)/include/proto.h $(srcdir)/include/build_env.h
1247         @/bin/rm -f $(srcdir)/include/wrepld_proto.h $(srcdir)/nsswitch/winbindd_proto.h
1248         @/bin/rm -f $(srcdir)/web/swat_proto.h
1249         @/bin/rm -f $(srcdir)/client/client_proto.h $(srcdir)/utils/net_proto.h
1250         @/bin/rm -f $(srcdir)/include/tdbsam2_parse_info.h
1251
1252         @/bin/rm -f include/proto.h include/build_env.h include/wrepld_proto.h \
1253                     nsswitch/winbindd_proto.h web/swat_proto.h \
1254                     client/client_proto.h utils/net_proto.h \
1255                     include/tdbsam2_parse_info.h
1256
1257 include/proto.h:
1258         @echo Building include/proto.h
1259         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1260           -h _PROTO_H_ $(builddir)/include/proto.h \
1261           $(PROTO_OBJ)
1262
1263 include/build_env.h:
1264         @echo Building include/build_env.h
1265         @cd $(srcdir) && $(SHELL) script/build_env.sh $(srcdir) $(builddir) $(CC) > $(builddir)/include/build_env.h
1266
1267 include/wrepld_proto.h:
1268         @echo Building include/wrepld_proto.h
1269         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1270           -h _WREPLD_PROTO_H_ $(builddir)/include/wrepld_proto.h \
1271           $(WREPL_OBJ1)
1272
1273 nsswitch/winbindd_proto.h:
1274         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1275           -h _WINBINDD_PROTO_H_ nsswitch/winbindd_proto.h \
1276           $(WINBINDD_OBJ1)
1277
1278 web/swat_proto.h:
1279         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1280           -h _SWAT_PROTO_H_ web/swat_proto.h \
1281           $(SWAT_OBJ1)
1282
1283 client/client_proto.h:
1284         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1285           -h _CLIENT_PROTO_H_ client/client_proto.h \
1286           $(CLIENT_OBJ1)
1287
1288 utils/net_proto.h:
1289         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1290           -h _CLIENT_PROTO_H_ utils/net_proto.h \
1291           $(NET_OBJ1)
1292
1293 include/tdbsam2_parse_info.h:
1294         @if test -n "$(PERL)"; then \
1295                 cd $(srcdir) && @PERL@ -w script/genstruct.pl \
1296                 -o include/tdbsam2_parse_info.h $(CC) -E -O2 -g \
1297                 include/tdbsam2.h; \
1298         else \
1299                 echo Unable to build $@, continuing; \
1300         fi
1301
1302 # "make headers" or "make proto" calls a subshell because we need to
1303 # make sure these commands are executed in sequence even for a
1304 # parallel make.
1305 headers:
1306         $(MAKE) delheaders; \
1307         $(MAKE) include/proto.h; \
1308         $(MAKE) include/build_env.h; \
1309         $(MAKE) include/wrepld_proto.h; \
1310         $(MAKE) nsswitch/winbindd_proto.h; \
1311         $(MAKE) web/swat_proto.h; \
1312         $(MAKE) client/client_proto.h; \
1313         $(MAKE) utils/net_proto.h; \
1314         $(MAKE) include/tdbsam2_parse_info.h
1315
1316 proto: headers
1317
1318 .PHONY: headers proto
1319
1320 etags:
1321         etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
1322
1323 ctags:
1324         ctags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
1325
1326 realclean: clean delheaders
1327         -rm -f config.log bin/.dummy script/findsmb
1328
1329 distclean: realclean
1330         -rm -f include/stamp-h
1331         -rm -f include/config.h Makefile
1332         -rm -f config.status config.cache so_locations
1333         -rm -rf .deps
1334
1335 # this target is really just for my use. It only works on a limited
1336 # range of machines and is used to produce a list of potentially
1337 # dead (ie. unused) functions in the code. (tridge)
1338 finddead:
1339         nm */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
1340         nm */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
1341         comm -13 nmused.txt nmfns.txt
1342
1343
1344 # when configure.in is updated, reconfigure
1345 $(srcdir)/configure: $(srcdir)/configure.in
1346         @echo "WARNING: you need to rerun ./autogen.sh"
1347
1348 config.status: $(srcdir)/configure
1349         @echo "WARNING: you need to run ./configure"
1350
1351 Makefile: $(srcdir)/Makefile.in config.status
1352         @echo "WARNING: you need to run ./config.status"
1353
1354 ######################################################################
1355 # Samba Testing Framework
1356
1357 # FIXME: LD_LIBRARY_PATH is not portable, but in the absence of
1358 # libtool I don't know a better way to do it.  Perhaps we should fix
1359 # libbigballofmud to link statically?
1360
1361 check: check-programs
1362         LD_LIBRARY_PATH="`pwd`/bin:$$LD_LIBRARY_PATH" \
1363         PATH="`pwd`/bin:$$PATH" \
1364         python stf/standardcheck.py
1365
1366 # These are called by the test suite and need to be built before
1367 # running it.  For the time being we don't build all of BIN_PROGS,
1368 # because they're not all needed.
1369 check-programs: bin/t_strcmp bin/t_push_ucs2 bin/smbcontrol