source/Makefile.in

   1 #########################################################################
   2 # Makefile.in for Samba - rewritten for autoconf support
   3 # Copyright Andrew Tridgell 1992-1998
   4 # Copyright (C) 2001 by Martin Pool <mbp@samba.org>
   5 # Copyright Andrew Bartlett 2002
   6 # Copyright (C) 2003 Anthony Liguori <aliguor@us.ibm.com>
   7 # Copyright (C) 2002-2003 Jelmer Vernooij <jelmer@samba.org>
   8 ###########################################################################
   9
  10 prefix=@prefix@
  11 exec_prefix=@exec_prefix@
  12 mandir=@mandir@
  13
  14 LIBS=@LIBS@
  15 CC=@CC@
  16 SHLD=@SHLD@
  17 CFLAGS=@CFLAGS@
  18 CPPFLAGS=@CPPFLAGS@
  19 EXEEXT=@EXEEXT@
  20 LDFLAGS=@LDFLAGS@
  21 LDSHFLAGS=@LDSHFLAGS@ @LDFLAGS@ @CFLAGS@
  22 WINBIND_NSS_LDSHFLAGS=@WINBIND_NSS_LDSHFLAGS@ @LDFLAGS@ @CFLAGS@
  23 AWK=@AWK@
  24 DYNEXP=@DYNEXP@
  25 PYTHON=@PYTHON@
  26
  27 TERMLDFLAGS=@TERMLDFLAGS@
  28 TERMLIBS=@TERMLIBS@
  29 PRINTLIBS=@PRINTLIBS@
  30 AUTHLIBS=@AUTHLIBS@
  31 ACLLIBS=@ACLLIBS@
  32
  33 LINK=$(CC) $(FLAGS) $(LDFLAGS)
  34
  35 INSTALLCMD=@INSTALL@
  36 INSTALLCLIENTCMD_SH=@INSTALLCLIENTCMD_SH@
  37 INSTALLCLIENTCMD_A=@INSTALLCLIENTCMD_A@
  38
  39 VPATH=@srcdir@
  40 srcdir=@srcdir@
  41 builddir=@builddir@
  42 SHELL=/bin/sh
  43
  44 # XXX: Perhaps this should be @SHELL@ instead -- apparently autoconf
  45 # will search for a POSIX-compliant shell, and that might not be
  46 # /bin/sh on some platforms.  I guess it's not a big problem -- mbp
  47
  48 # See the autoconf manual "Installation Directory Variables" for a
  49 # discussion of thesubtle use of these variables.
  50
  51 BASEDIR= @prefix@
  52 BINDIR = @bindir@
  53 # sbindir is mapped to bindir when compiling SAMBA in 2.0.x compatibility mode.
  54 SBINDIR = @sbindir@
  55 LIBDIR = @libdir@
  56 VFSLIBDIR = $(LIBDIR)/vfs
  57 PDBLIBDIR = $(LIBDIR)/pdb
  58 RPCLIBDIR = $(LIBDIR)/rpc
  59 CHARSETLIBDIR = $(LIBDIR)/charset
  60 AUTHLIBDIR = $(LIBDIR)/auth
  61 CONFIGDIR = @configdir@
  62 VARDIR = @localstatedir@
  63 MANDIR = @mandir@
  64
  65 # The permissions to give the executables
  66 INSTALLPERMS = 0755
  67
  68 # set these to where to find various files
  69 # These can be overridden by command line switches (see smbd(8))
  70 # or in smb.conf (see smb.conf(5))
  71 LOGFILEBASE = @logfilebase@
  72 CONFIGFILE = $(CONFIGDIR)/smb.conf
  73 LMHOSTSFILE = $(CONFIGDIR)/lmhosts
  74
  75 # This is where smbpasswd et al go
  76 PRIVATEDIR = @privatedir@
  77
  78 SMB_PASSWD_FILE = $(PRIVATEDIR)/smbpasswd
  79 PRIVATE_DIR = $(PRIVATEDIR)
  80
  81 # This is where SWAT images and help files go
  82 SWATDIR = @swatdir@
  83
  84 # the directory where lock files go
  85 LOCKDIR = @lockdir@
  86
  87 # the directory where pid files go
  88 PIDDIR = @piddir@
  89 # man pages language(s)
  90 man_langs = "@manlangs@"
  91
  92 LIBSMBCLIENT=bin/libsmbclient.a @LIBSMBCLIENT_SHARED@
  93 LIBSMBCLIENT_MAJOR=0
  94 LIBSMBCLIENT_MINOR=1
  95
  96
  97 FLAGS1 = $(CFLAGS) @FLAGS1@ -Iinclude -I$(srcdir)/include -I$(srcdir)/ubiqx -I$(srcdir)/smbwrapper  -I. $(CPPFLAGS) -I$(srcdir)
  98 FLAGS2 =
  99 FLAGS3 =
 100 FLAGS4 =
 101 FLAGS5 = $(FLAGS1) $(FLAGS2) $(FLAGS3) $(FLAGS4)
 102 FLAGS  = $(ISA) $(FLAGS5)
 103 FLAGS32  = $(ISA32) $(FLAGS5)
 104
 105 PASSWD_FLAGS = -DSMB_PASSWD_FILE=\"$(SMB_PASSWD_FILE)\" -DPRIVATE_DIR=\"$(PRIVATE_DIR)\"
 106 PATH_FLAGS1 = -DCONFIGFILE=\"$(CONFIGFILE)\"  -DSBINDIR=\"$(SBINDIR)\"
 107 PATH_FLAGS2 = $(PATH_FLAGS1) -DBINDIR=\"$(BINDIR)\" -DDRIVERFILE=\"$(DRIVERFILE)\"
 108 PATH_FLAGS3 = $(PATH_FLAGS2) -DLMHOSTSFILE=\"$(LMHOSTSFILE)\"
 109 PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\"  -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\"
 110 PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \
 111               -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\"
 112 PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\"
 113 PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS)
 114
 115 # Note that all executable programs now provide for an optional executable suffix.
 116
 117 SBIN_PROGS = bin/smbd@EXEEXT@ bin/nmbd@EXEEXT@ bin/swat@EXEEXT@ \
 118         bin/wrepld@EXEEXT@ @EXTRA_SBIN_PROGS@
 119
 120 BIN_PROGS1 = bin/smbclient@EXEEXT@ bin/net@EXEEXT@ bin/smbspool@EXEEXT@ \
 121         bin/testparm@EXEEXT@ bin/testprns@EXEEXT@ bin/smbstatus@EXEEXT@
 122 BIN_PROGS2 = bin/smbcontrol@EXEEXT@ bin/smbtree@EXEEXT@ bin/tdbbackup@EXEEXT@ \
 123         bin/nmblookup@EXEEXT@ bin/pdbedit@EXEEXT@
 124 BIN_PROGS3 = bin/smbpasswd@EXEEXT@ bin/rpcclient@EXEEXT@ bin/smbcacls@EXEEXT@ \
 125         bin/profiles@EXEEXT@ bin/smbgroupedit@EXEEXT@ bin/ntlm_auth@EXEEXT@
 126
 127 TORTURE_PROGS = bin/smbtorture@EXEEXT@ bin/msgtest@EXEEXT@ \
 128         bin/masktest@EXEEXT@ bin/locktest@EXEEXT@ \
 129         bin/locktest2@EXEEXT@ bin/nsstest@EXEEXT@ bin/vfstest@EXEEXT@
 130
 131 BIN_PROGS = $(BIN_PROGS1) $(BIN_PROGS2) $(BIN_PROGS3) @EXTRA_BIN_PROGS@
 132
 133 EVERYTHING_PROGS = bin/debug2html@EXEEXT@ bin/smbfilter@EXEEXT@ bin/talloctort@EXEEXT@
 134
 135 SHLIBS = @SHLIB_PROGS@ @LIBSMBCLIENT@
 136
 137 SCRIPTS = $(srcdir)/script/smbtar $(srcdir)/script/addtosmbpass $(srcdir)/script/convert_smbpasswd \
 138           $(builddir)/script/findsmb
 139
 140 QUOTAOBJS=@QUOTAOBJS@
 141
 142 VFS_MODULES = bin/vfs_audit.@SHLIBEXT@ bin/vfs_extd_audit.@SHLIBEXT@ bin/vfs_recycle.@SHLIBEXT@ bin/vfs_netatalk.@SHLIBEXT@
 143 PDB_MODULES = @MODULE_MYSQL@ @MODULE_XML@
 144
 145 ######################################################################
 146 # object file lists
 147 ######################################################################
 148
 149 TDBBASE_OBJ = tdb/tdb.o tdb/spinlock.o
 150 TDB_OBJ = $(TDBBASE_OBJ) tdb/tdbutil.o
 151
 152 LIB_OBJ = lib/charcnv.o lib/debug.o lib/fault.o \
 153           lib/getsmbpass.o lib/interface.o lib/md4.o \
 154           lib/interfaces.o lib/pidfile.o lib/replace.o \
 155           lib/signal.o lib/system.o lib/sendfile.o lib/time.o \
 156           lib/ufc.o lib/genrand.o lib/username.o \
 157           lib/util_getent.o lib/util_pw.o lib/access.o lib/smbrun.o \
 158           lib/bitmap.o lib/crc32.o lib/snprintf.o lib/dprintf.o \
 159           lib/xfile.o lib/wins_srv.o \
 160           lib/util_str.o lib/clobber.o lib/util_sid.o lib/util_uuid.o \
 161           lib/util_unistr.o lib/util_file.o lib/data_blob.o \
 162           lib/util.o lib/util_sock.o lib/util_sec.o \
 163           lib/talloc.o lib/hash.o lib/substitute.o lib/fsusage.o \
 164           lib/ms_fnmatch.o lib/select.o lib/messages.o \
 165           lib/tallocmsg.o lib/dmallocmsg.o \
 166           lib/md5.o lib/hmacmd5.o lib/iconv.o lib/smbpasswd.o \
 167           nsswitch/wb_client.o nsswitch/wb_common.o \
 168           lib/pam_errors.o intl/lang_tdb.o lib/account_pol.o \
 169           lib/adt_tree.o lib/gencache.o $(TDB_OBJ) \
 170           lib/module.o lib/ldap_escape.o
 171
 172 LIB_SMBD_OBJ = lib/system_smbd.o lib/util_smbd.o
 173
 174 READLINE_OBJ = lib/readline.o
 175
 176 POPT_LIB_OBJ = lib/popt_common.o
 177
 178 UBIQX_OBJ = ubiqx/ubi_BinTree.o ubiqx/ubi_Cache.o ubiqx/ubi_SplayTree.o \
 179             ubiqx/ubi_dLinkList.o ubiqx/ubi_sLinkList.o
 180
 181 PARAM_OBJ = dynconfig.o param/loadparm.o param/params.o
 182
 183 KRBCLIENT_OBJ = libads/kerberos.o
 184
 185 LIBADS_OBJ = libads/ldap.o libads/ldap_printer.o libads/sasl.o \
 186              libads/krb5_setpw.o libads/ldap_user.o \
 187              libads/ads_struct.o libads/ads_status.o \
 188              libads/disp_sec.o libads/ads_utils.o libads/ldap_utils.o \
 189              libads/ads_ldap.o
 190
 191 LIBADS_SERVER_OBJ = libads/util.o libads/kerberos_verify.o
 192
 193 SECRETS_OBJ = passdb/secrets.o
 194
 195 LIBNMB_OBJ = libsmb/unexpected.o libsmb/namecache.o libsmb/nmblib.o \
 196              libsmb/namequery.o
 197
 198 LIBNTLMSSP_OBJ = libsmb/ntlmssp.o libsmb/ntlmssp_parse.o libsmb/ntlmssp_sign.o
 199
 200 LIBSAMBA_OBJ = libsmb/nterr.o libsmb/smbdes.o libsmb/smbencrypt.o
 201
 202 LIBSMB_OBJ = libsmb/clientgen.o libsmb/cliconnect.o libsmb/clifile.o \
 203              libsmb/clikrb5.o libsmb/clispnego.o libsmb/asn1.o \
 204              libsmb/clirap.o libsmb/clierror.o libsmb/climessage.o \
 205              libsmb/clireadwrite.o libsmb/clilist.o libsmb/cliprint.o \
 206              libsmb/clitrans.o libsmb/clisecdesc.o libsmb/clidgram.o \
 207              libsmb/clistr.o libsmb/smb_signing.o \
 208              libsmb/smberr.o libsmb/credentials.o libsmb/pwd_cache.o \
 209              libsmb/clioplock.o libsmb/errormap.o libsmb/clirap2.o \
 210              libsmb/passchange.o libsmb/doserr.o \
 211              $(RPC_PARSE_OBJ1) $(LIBNTLMSSP_OBJ) $(LIBSAMBA_OBJ) $(LIBNMB_OBJ)
 212
 213 LIBMSRPC_OBJ = rpc_client/cli_lsarpc.o rpc_client/cli_samr.o \
 214                rpc_client/cli_netlogon.o rpc_client/cli_srvsvc.o \
 215                rpc_client/cli_wkssvc.o rpc_client/cli_dfs.o \
 216                rpc_client/cli_reg.o rpc_client/cli_pipe.o \
 217                rpc_client/cli_spoolss.o rpc_client/cli_spoolss_notify.o  \
 218                rpc_client/cli_ds.o rpc_client/cli_echo.o libsmb/namequery_dc.o
 219
 220 LIBMSRPC_SERVER_OBJ = libsmb/trust_passwd.o
 221
 222 REGOBJS_OBJ = registry/reg_objects.o
 223 REGISTRY_OBJ = registry/reg_frontend.o registry/reg_cachehook.o registry/reg_printing.o \
 224                registry/reg_db.o
 225
 226 RPC_LSA_OBJ = rpc_server/srv_lsa.o rpc_server/srv_lsa_nt.o
 227
 228 RPC_NETLOG_OBJ = rpc_server/srv_netlog.o rpc_server/srv_netlog_nt.o
 229
 230 RPC_SAMR_OBJ = rpc_server/srv_samr.o rpc_server/srv_samr_nt.o \
 231                rpc_server/srv_samr_util.o
 232
 233 RPC_REG_OBJ =  rpc_server/srv_reg.o rpc_server/srv_reg_nt.o
 234
 235 RPC_SVC_OBJ = rpc_server/srv_srvsvc.o rpc_server/srv_srvsvc_nt.o
 236
 237 RPC_WKS_OBJ =  rpc_server/srv_wkssvc.o rpc_server/srv_wkssvc_nt.o
 238
 239 RPC_DFS_OBJ =  rpc_server/srv_dfs.o rpc_server/srv_dfs_nt.o
 240
 241 RPC_SPOOLSS_OBJ = rpc_server/srv_spoolss.o rpc_server/srv_spoolss_nt.o
 242
 243 RPC_ECHO_OBJ = rpc_server/srv_echo.o rpc_server/srv_echo_nt.o
 244
 245 RPC_PIPE_OBJ = rpc_server/srv_pipe_hnd.o rpc_server/srv_util.o \
 246                rpc_server/srv_pipe.o rpc_server/srv_lsa_hnd.o
 247
 248 # These are like they are to avoid a dependency on GNU MAKE
 249 @LSA_DYNAMIC_YES@RPC_MODULES1 = bin/librpc_lsarpc.@SHLIBEXT@
 250 @NETLOG_DYNAMIC_YES@RPC_MODULES2 = bin/librpc_NETLOGON.@SHLIBEXT@
 251 @SAMR_DYNAMIC_YES@RPC_MODULES3 = bin/librpc_samr.@SHLIBEXT@
 252 @SVC_DYNAMIC_YES@RPC_MODULES4 = bin/librpc_srvsvc.@SHLIBEXT@
 253 @WKS_DYNAMIC_YES@RPC_MODULES5 = bin/librpc_wkssvc.@SHLIBEXT@
 254 @REG_DYNAMIC_YES@RPC_MODULES6 = bin/librpc_winreg.@SHLIBEXT@
 255 @SPOOLSS_DYNAMIC_YES@RPC_MODULES7 = bin/librpc_spoolss.@SHLIBEXT@
 256 @DFS_DYNAMIC_YES@RPC_MODULES8 = bin/librpc_netdfs.@SHLIBEXT@
 257 @ECHO_DYNAMIC_YES@RPC_MODULES9 = bin/librpc_echo.@SHLIBEXT@
 258 RPC_MODULES = $(RPC_MODULES1) $(RPC_MODULES2) $(RPC_MODULES3) $(RPC_MODULES4) \
 259         $(RPC_MODULES5) $(RPC_MODULES6) $(RPC_MODULES7) $(RPC_MODULES8) \
 260         $(RPC_MODULES9)
 261
 262 @LSA_DYNAMIC_NO@RPC_PIPE_OBJ1 = $(RPC_LSA_OBJ)
 263 @NETLOG_DYNAMIC_NO@RPC_PIPE_OBJ2 = $(RPC_NETLOG_OBJ)
 264 @SAMR_DYNAMIC_NO@RPC_PIPE_OBJ3 = $(RPC_SAMR_OBJ)
 265 @SVC_DYNAMIC_NO@RPC_PIPE_OBJ4 = $(RPC_SVC_OBJ)
 266 @WKS_DYNAMIC_NO@RPC_PIPE_OBJ5 = $(RPC_WKS_OBJ)
 267 @REG_DYNAMIC_NO@RPC_PIPE_OBJ6 = $(RPC_REG_OBJ)
 268 @SPOOLSS_DYNAMIC_NO@RPC_PIPE_OBJ7 = $(RPC_SPOOLSS_OBJ)
 269 @DFS_DYNAMIC_NO@RPC_PIPE_OBJ8 = $(RPC_DFS_OBJ)
 270 @ECHO_DYNAMIC_NO@RPC_PIPE_OBJ9 = $(RPC_ECHO_OBJ)
 271 RPC_SERVER_OBJ = $(RPC_PIPE_OBJ1) $(RPC_PIPE_OBJ2) $(RPC_PIPE_OBJ3) \
 272         $(RPC_PIPE_OBJ4) $(RPC_PIPE_OBJ5) $(RPC_PIPE_OBJ6) $(RPC_PIPE_OBJ7) \
 273         $(RPC_PIPE_OBJ8) $(RPC_PIPE_OBJ9) $(RPC_PIPE_OBJ)
 274
 275 # this includes only the low level parse code, not stuff
 276 # that requires knowledge of security contexts
 277 RPC_PARSE_OBJ1 = rpc_parse/parse_prs.o rpc_parse/parse_sec.o \
 278                  rpc_parse/parse_misc.o
 279
 280 RPC_PARSE_OBJ = rpc_parse/parse_lsa.o rpc_parse/parse_net.o \
 281                 rpc_parse/parse_reg.o rpc_parse/parse_rpc.o \
 282                 rpc_parse/parse_samr.o rpc_parse/parse_srv.o \
 283                 rpc_parse/parse_wks.o rpc_parse/parse_ds.o \
 284                 rpc_parse/parse_spoolss.o rpc_parse/parse_dfs.o \
 285                 rpc_parse/parse_echo.o $(REGOBJS_OBJ)
 286
 287
 288 RPC_CLIENT_OBJ = rpc_client/cli_pipe.o
 289
 290 LOCKING_OBJ = locking/locking.o locking/brlock.o locking/posix.o
 291
 292 PASSDB_GET_SET_OBJ = passdb/pdb_get_set.o
 293
 294 PASSDB_OBJ = $(PASSDB_GET_SET_OBJ) passdb/passdb.o passdb/pdb_interface.o \
 295                 passdb/machine_sid.o passdb/pdb_smbpasswd.o \
 296                 passdb/pdb_tdb.o passdb/pdb_ldap.o passdb/pdb_plugin.o \
 297                 passdb/pdb_unix.o passdb/pdb_guest.o passdb/util_sam_sid.o \
 298                 passdb/pdb_compat.o passdb/pdb_nisplus.o
 299
 300 PDB_XML_OBJ = passdb/pdb_xml.o
 301 PDB_MYSQL_OBJ = passdb/pdb_mysql.o
 302
 303 GROUPDB_OBJ = groupdb/mapping.o
 304
 305 PROFILE_OBJ = profile/profile.o
 306
 307 OPLOCK_OBJ = smbd/oplock.o smbd/oplock_irix.o smbd/oplock_linux.o
 308
 309 NOTIFY_OBJ = smbd/notify.o smbd/notify_hash.o smbd/notify_kernel.o
 310
 311 PLAINTEXT_AUTH_OBJ = auth/pampass.o auth/pass_check.o
 312
 313 UNIGRP_OBJ = libsmb/netlogon_unigrp.o
 314
 315 AUTH_OBJ = auth/auth.o auth/auth_sam.o auth/auth_server.o auth/auth_domain.o \
 316            auth/auth_rhosts.o auth/auth_unix.o auth/auth_util.o auth/auth_winbind.o \
 317            auth/auth_builtin.o auth/auth_compat.o auth/auth_ntlmssp.o \
 318            $(PLAINTEXT_AUTH_OBJ) $(UNIGRP_OBJ)
 319
 320 MANGLE_OBJ = smbd/mangle.o smbd/mangle_hash.o smbd/mangle_map.o smbd/mangle_hash2.o
 321
 322 SMBD_OBJ_MAIN = smbd/server.o
 323
 324 SMBD_OBJ_SRV = smbd/files.o smbd/chgpasswd.o smbd/connection.o \
 325                smbd/utmp.o smbd/session.o \
 326                smbd/dfree.o smbd/dir.o smbd/password.o smbd/conn.o smbd/fileio.o \
 327                smbd/ipc.o smbd/lanman.o smbd/negprot.o \
 328                smbd/message.o smbd/nttrans.o smbd/pipes.o \
 329                smbd/reply.o smbd/sesssetup.o smbd/trans2.o smbd/uid.o \
 330                smbd/dosmode.o smbd/filename.o smbd/open.o smbd/close.o \
 331                smbd/blocking.o smbd/sec_ctx.o smbd/srvstr.o \
 332                smbd/vfs.o smbd/vfs-wrap.o smbd/statcache.o \
 333                smbd/posix_acls.o lib/sysacls.o lib/server_mutex.o \
 334                smbd/process.o smbd/service.o smbd/error.o \
 335                printing/printfsp.o lib/util_seaccess.o \
 336                smbd/build_options.o \
 337                smbd/change_trust_pw.o \
 338                $(MANGLE_OBJ)
 339
 340 SMBD_OBJ_BASE = $(SMBD_OBJ_SRV) $(MSDFS_OBJ) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 341                 $(RPC_SERVER_OBJ) $(RPC_PARSE_OBJ) $(SECRETS_OBJ) \
 342                 $(LOCKING_OBJ) $(PASSDB_OBJ) $(PRINTING_OBJ) $(PROFILE_OBJ) \
 343                 $(LIB_OBJ) $(PRINTBACKEND_OBJ) $(QUOTAOBJS) $(OPLOCK_OBJ) \
 344                 $(NOTIFY_OBJ) $(GROUPDB_OBJ) $(AUTH_OBJ) \
 345                 $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) \
 346                 $(LIBADS_OBJ) $(KRBCLIENT_OBJ) $(LIBADS_SERVER_OBJ) \
 347                 $(LIB_SMBD_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ)
 348
 349
 350 PRINTING_OBJ = printing/pcap.o printing/print_svid.o \
 351                                 printing/print_cups.o printing/print_generic.o \
 352                                 printing/lpq_parse.o printing/load.o
 353
 354 PRINTBACKEND_OBJ = printing/printing.o printing/nt_printing.o printing/notify.o \
 355                 printing/printing_db.o
 356
 357 MSDFS_OBJ = msdfs/msdfs.o
 358
 359 SMBD_OBJ = $(SMBD_OBJ_MAIN) $(SMBD_OBJ_BASE)
 360
 361 NMBD_OBJ1 = nmbd/asyncdns.o nmbd/nmbd.o nmbd/nmbd_become_dmb.o \
 362             nmbd/nmbd_become_lmb.o nmbd/nmbd_browserdb.o \
 363             nmbd/nmbd_browsesync.o nmbd/nmbd_elections.o \
 364             nmbd/nmbd_incomingdgrams.o nmbd/nmbd_incomingrequests.o \
 365             nmbd/nmbd_lmhosts.o nmbd/nmbd_logonnames.o nmbd/nmbd_mynames.o \
 366             nmbd/nmbd_namelistdb.o nmbd/nmbd_namequery.o \
 367             nmbd/nmbd_nameregister.o nmbd/nmbd_namerelease.o \
 368             nmbd/nmbd_nodestatus.o nmbd/nmbd_packets.o \
 369             nmbd/nmbd_processlogon.o nmbd/nmbd_responserecordsdb.o \
 370             nmbd/nmbd_sendannounce.o nmbd/nmbd_serverlistdb.o \
 371             nmbd/nmbd_subnetdb.o nmbd/nmbd_winsproxy.o nmbd/nmbd_winsserver.o \
 372             nmbd/nmbd_workgroupdb.o nmbd/nmbd_synclists.o
 373
 374 NMBD_OBJ = $(NMBD_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(UBIQX_OBJ) \
 375            $(PROFILE_OBJ) $(LIB_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 376
 377 WREPL_OBJ1 = wrepld/server.o wrepld/process.o wrepld/parser.o wrepld/socket.o \
 378              wrepld/partners.o
 379
 380 WREPL_OBJ = $(WREPL_OBJ1)  $(PARAM_OBJ) $(UBIQX_OBJ) \
 381             $(PROFILE_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 382
 383 SWAT_OBJ1 = web/cgi.o web/diagnose.o web/startstop.o web/statuspage.o \
 384            web/swat.o web/neg_lang.o
 385
 386 SWAT_OBJ = $(SWAT_OBJ1) $(PRINTING_OBJ) $(LIBSMB_OBJ) $(LOCKING_OBJ) \
 387            $(PARAM_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(KRBCLIENT_OBJ) \
 388            $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(PLAINTEXT_AUTH_OBJ) \
 389            $(POPT_LIB_OBJ)
 390
 391 SMBSH_OBJ = smbwrapper/smbsh.o smbwrapper/shared.o \
 392             $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 393
 394 STATUS_OBJ = utils/status.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 395              $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 396
 397 SMBCONTROL_OBJ = utils/smbcontrol.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 398         $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ) \
 399         printing/notify.o printing/printing_db.o
 400
 401 SMBTREE_OBJ = utils/smbtree.o $(LOCKING_OBJ) $(PARAM_OBJ) \
 402              $(UBIQX_OBJ) $(PROFILE_OBJ) $(LIB_OBJ) $(LIBSMB_OBJ) \
 403              $(KRBCLIENT_OBJ) $(POPT_LIB_OBJ)
 404
 405 TESTPARM_OBJ = utils/testparm.o \
 406                $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) $(POPT_LIB_OBJ)
 407
 408 TESTPRNS_OBJ = utils/testprns.o $(PARAM_OBJ) $(PRINTING_OBJ) $(UBIQX_OBJ) \
 409                $(LIB_OBJ)
 410
 411 SMBPASSWD_OBJ = utils/smbpasswd.o $(PARAM_OBJ) $(SECRETS_OBJ) \
 412                 $(LIBSMB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ)\
 413                 $(UBIQX_OBJ) $(LIB_OBJ) $(KRBCLIENT_OBJ)
 414
 415 PDBEDIT_OBJ = utils/pdbedit.o $(PARAM_OBJ) $(PASSDB_OBJ) $(LIBSAMBA_OBJ) \
 416                 $(UBIQX_OBJ) $(LIB_OBJ) $(GROUPDB_OBJ) $(SECRETS_OBJ) \
 417                 $(POPT_LIB_OBJ)
 418
 419 SMBGROUPEDIT_OBJ = utils/smbgroupedit.o $(GROUPDB_OBJ) $(PARAM_OBJ) \
 420                 $(LIBSAMBA_OBJ) $(PASSDB_OBJ) $(SECRETS_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 421
 422 RPCCLIENT_OBJ1 = rpcclient/rpcclient.o rpcclient/cmd_lsarpc.o \
 423                  rpcclient/cmd_samr.o rpcclient/cmd_spoolss.o \
 424                  rpcclient/cmd_netlogon.o rpcclient/cmd_srvsvc.o \
 425                  rpcclient/cmd_dfs.o rpcclient/cmd_reg.o \
 426                  rpcclient/display_sec.o rpcclient/cmd_ds.o \
 427                  rpcclient/cmd_echo.o
 428
 429 RPCCLIENT_OBJ = $(RPCCLIENT_OBJ1) \
 430              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 431              $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(LIBMSRPC_OBJ) \
 432              $(READLINE_OBJ) $(GROUPDB_OBJ) $(KRBCLIENT_OBJ) \
 433              $(LIBADS_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 434
 435 PAM_WINBIND_OBJ = nsswitch/pam_winbind.po nsswitch/wb_common.po lib/snprintf.po
 436
 437 SMBW_OBJ1 = smbwrapper/smbw.o \
 438                 smbwrapper/smbw_dir.o smbwrapper/smbw_stat.o \
 439                 smbwrapper/realcalls.o smbwrapper/shared.o \
 440                 smbwrapper/smbw_cache.o
 441
 442 SMBW_OBJ = $(SMBW_OBJ1) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(PARAM_OBJ) \
 443                 $(UBIQX_OBJ) $(LIB_OBJ)
 444
 445 SMBWRAPPER_OBJ1 = smbwrapper/wrapped.o
 446
 447 SMBWRAPPER_OBJ = $(SMBW_OBJ) $(SMBWRAPPER_OBJ1)
 448
 449 LIBSMBCLIENT_OBJ = libsmb/libsmbclient.o libsmb/libsmb_compat.o \
 450                    libsmb/libsmb_cache.o $(LIB_OBJ) \
 451                    $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ)
 452
 453 # This shared library is intended for linking with unit test programs
 454 # to test Samba internals.  It's called libbigballofmud.so to
 455 # discourage casual usage.
 456
 457 LIBBIGBALLOFMUD_MAJOR = 0
 458
 459 LIBBIGBALLOFMUD_OBJ = $(LIB_OBJ) $(UBIQX_OBJ) $(PARAM_OBJ) $(SECRETS_OBJ) \
 460         $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_OBJ) \
 461         $(GROUPDB_OBJ) $(KRBCLIENT_OBJ)
 462
 463 LIBBIGBALLOFMUD_PICOBJS = $(LIBBIGBALLOFMUD_OBJ:.o=.po)
 464
 465 CLIENT_OBJ1 = client/client.o client/clitar.o
 466
 467 CLIENT_OBJ = $(CLIENT_OBJ1) $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 468              $(LIB_OBJ) $(KRBCLIENT_OBJ) \
 469              $(READLINE_OBJ) $(POPT_LIB_OBJ)
 470
 471 NET_OBJ1 = utils/net.o utils/net_ads.o utils/net_ads_cldap.o utils/net_help.o \
 472            utils/net_rap.o utils/net_rpc.o utils/net_rpc_samsync.o \
 473            utils/net_rpc_join.o utils/net_time.o utils/net_lookup.o \
 474            utils/net_cache.o
 475
 476 NET_OBJ = $(NET_OBJ1) $(SECRETS_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
 477           $(RPC_PARSE_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
 478           $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 479           $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) \
 480           $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) $(POPT_LIB_OBJ)
 481
 482 CUPS_OBJ = client/smbspool.o $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) \
 483           $(LIB_OBJ) $(KRBCLIENT_OBJ)
 484
 485 MOUNT_OBJ = client/smbmount.o \
 486              $(PARAM_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 487
 488 MNT_OBJ = client/smbmnt.o
 489
 490 UMOUNT_OBJ = client/smbumount.o
 491
 492 NMBLOOKUP_OBJ = utils/nmblookup.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBNMB_OBJ) \
 493                $(LIB_OBJ) $(POPT_LIB_OBJ)
 494
 495 SMBTORTURE_OBJ1 = torture/torture.o torture/nbio.o torture/scanner.o torture/utable.o \
 496                 torture/denytest.o torture/mangle_test.o
 497
 498 SMBTORTURE_OBJ = $(SMBTORTURE_OBJ1) \
 499         $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ)
 500
 501 MASKTEST_OBJ = torture/masktest.o $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(PARAM_OBJ) \
 502                  $(UBIQX_OBJ) $(LIB_OBJ)
 503
 504 MSGTEST_OBJ = torture/msgtest.o $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(PARAM_OBJ) \
 505                  $(UBIQX_OBJ) $(LIB_OBJ)
 506
 507 LOCKTEST_OBJ = torture/locktest.o $(LOCKING_OBJ) $(KRBCLIENT_OBJ) $(LIBSMB_OBJ) $(PARAM_OBJ) \
 508                  $(UBIQX_OBJ) $(LIB_OBJ)
 509
 510 NSSTEST_OBJ = torture/nsstest.o $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) $(PARAM_OBJ) \
 511                  $(UBIQX_OBJ) $(LIB_OBJ)
 512
 513 VFSTEST_OBJ = torture/cmd_vfs.o torture/vfstest.o $(SMBD_OBJ_BASE) $(READLINE_OBJ)
 514
 515 VFS_AUDIT_OBJ = modules/vfs_audit.o
 516 VFS_EXTD_AUDIT_OBJ = modules/vfs_extd_audit.o
 517 VFS_RECYCLE_OBJ = modules/vfs_recycle.o
 518 VFS_NETATALK_OBJ = modules/vfs_netatalk.o
 519
 520 LOCKTEST2_OBJ = torture/locktest2.o $(LOCKING_OBJ) $(LIBSMB_OBJ) \
 521                 $(KRBCLIENT_OBJ) $(PARAM_OBJ) \
 522                  $(UBIQX_OBJ) $(LIB_OBJ)
 523
 524 SMBCACLS_OBJ = utils/smbcacls.o $(LOCKING_OBJ) $(LIBSMB_OBJ) $(KRBCLIENT_OBJ) \
 525                 $(PARAM_OBJ) \
 526                  $(UBIQX_OBJ) $(LIB_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ) \
 527                  $(LIBMSRPC_OBJ) $(SECRETS_OBJ) $(POPT_LIB_OBJ)
 528
 529 TALLOCTORT_OBJ = lib/talloctort.o  $(LIB_OBJ) $(PARAM_OBJ) $(UBIQX_OBJ)
 530
 531 RPCTORTURE_OBJ = torture/rpctorture.o \
 532              rpcclient/display.o \
 533              rpcclient/cmd_lsarpc.o \
 534              rpcclient/cmd_wkssvc.o \
 535              rpcclient/cmd_samr.o \
 536              rpcclient/cmd_srvsvc.o \
 537              rpcclient/cmd_netlogon.o \
 538              $(PARAM_OBJ) $(LIBSMB_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) $(KRBCLIENT_OBJ) \
 539              $(RPC_CLIENT_OBJ) $(RPC_PARSE_OBJ) $(PASSDB_GET_SET_OBJ)
 540
 541 DEBUG2HTML_OBJ = utils/debug2html.o ubiqx/debugparse.o
 542
 543 SMBFILTER_OBJ = utils/smbfilter.o $(LIBSMB_OBJ) $(PARAM_OBJ) \
 544                  $(UBIQX_OBJ) $(LIB_OBJ) $(KRBCLIENT_OBJ)
 545
 546 PROTO_OBJ = $(SMBD_OBJ_MAIN) \
 547             $(SMBD_OBJ_SRV) $(NMBD_OBJ1) $(SWAT_OBJ1) $(LIB_OBJ) $(LIBSMB_OBJ) \
 548             $(SMBW_OBJ1) $(SMBWRAPPER_OBJ1) $(SMBTORTURE_OBJ1) $(RPCCLIENT_OBJ1) \
 549             $(LIBMSRPC_OBJ) $(LIBMSRPC_SERVER_OBJ) $(RPC_CLIENT_OBJ) \
 550             $(RPC_PIPE_OBJ) $(RPC_PARSE_OBJ) $(KRBCLIENT_OBJ) \
 551             $(AUTH_OBJ) $(PARAM_OBJ) $(LOCKING_OBJ) $(SECRETS_OBJ) \
 552             $(PRINTING_OBJ) $(PRINTBACKEND_OBJ) $(OPLOCK_OBJ) $(NOTIFY_OBJ) \
 553             $(QUOTAOBJS) $(PASSDB_OBJ) $(GROUPDB_OBJ) $(MSDFS_OBJ) \
 554             $(READLINE_OBJ) $(PROFILE_OBJ) $(LIBADS_OBJ) $(LIBADS_SERVER_OBJ) \
 555             $(LIB_SMBD_OBJ) $(SAM_OBJ) $(REGISTRY_OBJ) $(POPT_LIB_OBJ) \
 556             $(RPC_LSA_OBJ) $(RPC_NETLOG_OBJ) $(RPC_SAMR_OBJ) $(RPC_REG_OBJ) \
 557             $(RPC_SVC_OBJ) $(RPC_WKS_OBJ) $(RPC_DFS_OBJ) $(RPC_SPOOLSS_OBJ) \
 558             $(RPC_ECHO_OBJ)
 559
 560 NSS_OBJ_0 = nsswitch/wins.o $(PARAM_OBJ) $(UBIQX_OBJ) $(LIBSMB_OBJ) \
 561             $(LIB_OBJ) $(NSSWINS_OBJ)
 562
 563 NSS_OBJ = $(NSS_OBJ_0:.o=.po)
 564
 565 PICOBJS = $(SMBWRAPPER_OBJ:.o=.po)
 566 PICOBJS32 = $(SMBWRAPPER_OBJ:.o=.po32)
 567 LIBSMBCLIENT_PICOBJS = $(LIBSMBCLIENT_OBJ:.o=.po)
 568
 569 PAM_SMBPASS_OBJ_0 = pam_smbpass/pam_smb_auth.o pam_smbpass/pam_smb_passwd.o \
 570                pam_smbpass/pam_smb_acct.o pam_smbpass/support.o \
 571                libsmb/smbencrypt.o libsmb/smbdes.o libsmb/nterr.o \
 572                $(PARAM_OBJ) $(LIB_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
 573                $(SECRETS_OBJ) $(UBIQX_OBJ)
 574
 575 PAM_SMBPASS_PICOOBJ = $(PAM_SMBPASS_OBJ_0:.o=.po)
 576
 577 WINBINDD_OBJ1 = \
 578                 nsswitch/winbindd.o       \
 579                 nsswitch/winbindd_user.o  \
 580                 nsswitch/winbindd_group.o \
 581                 nsswitch/winbindd_idmap.o \
 582                 nsswitch/winbindd_util.o  \
 583                 nsswitch/winbindd_cache.o \
 584                 nsswitch/winbindd_pam.o   \
 585                 nsswitch/winbindd_sid.o   \
 586                 nsswitch/winbindd_misc.o  \
 587                 nsswitch/winbindd_cm.o \
 588                 nsswitch/winbindd_wins.o \
 589                 nsswitch/winbindd_rpc.o \
 590                 nsswitch/winbindd_ads.o \
 591                 nsswitch/winbindd_dual.o
 592
 593 WINBINDD_OBJ = \
 594                 $(WINBINDD_OBJ1) $(PASSDB_GET_SET_OBJ) \
 595                 $(PARAM_OBJ) $(UBIQX_OBJ) $(LIB_OBJ) \
 596                 $(LIBSMB_OBJ) $(LIBMSRPC_OBJ) $(RPC_PARSE_OBJ) \
 597                 $(PROFILE_OBJ) $(UNIGRP_OBJ) $(POPT_LIB_OBJ) \
 598                 $(SECRETS_OBJ) $(LIBADS_OBJ) $(KRBCLIENT_OBJ)
 599
 600 WBINFO_OBJ = nsswitch/wbinfo.o libsmb/smbencrypt.o libsmb/smbdes.o $(POPT_LIB_OBJ)
 601
 602 WINBIND_NSS_OBJ = nsswitch/wb_common.o @WINBIND_NSS_EXTRA_OBJS@
 603
 604 WINBIND_NSS_PICOBJS = $(WINBIND_NSS_OBJ:.o=.po)
 605
 606 POPT_OBJS=popt/findme.o popt/popt.o popt/poptconfig.o \
 607           popt/popthelp.o popt/poptparse.o
 608
 609 TDBBACKUP_OBJ = tdb/tdbbackup.o $(TDBBASE_OBJ)
 610
 611 NTLM_AUTH_OBJ = utils/ntlm_auth.o $(LIBNTLMSSP_OBJ) $(LIBSAMBA_OBJ) $(POPT_LIB_OBJ)
 612
 613 ######################################################################
 614 # now the rules...
 615 ######################################################################
 616 all : SHOWFLAGS proto_exists $(SBIN_PROGS) $(BIN_PROGS) $(SHLIBS) $(RPC_MODULES) @EXTRA_ALL_TARGETS@
 617
 618 pam_smbpass : SHOWFLAGS bin/pam_smbpass.@SHLIBEXT@
 619
 620 smbwrapper : SHOWFLAGS @SMBWRAPPER@
 621
 622 torture : SHOWFLAGS $(TORTURE_PROGS)
 623
 624 smbtorture : SHOWFLAGS bin/smbtorture@EXEEXT@
 625
 626 masktest : SHOWFLAGS bin/masktest@EXEEXT@
 627
 628 msgtest : SHOWFLAGS bin/msgtest@EXEEXT@
 629
 630 locktest : SHOWFLAGS bin/locktest@EXEEXT@
 631
 632 smbcacls : SHOWFLAGS bin/smbcacls@EXEEXT@
 633
 634 locktest2 : SHOWFLAGS bin/locktest2@EXEEXT@
 635
 636 rpctorture : SHOWFLAGS bin/rpctorture@EXEEXT@
 637
 638 debug2html : SHOWFLAGS bin/debug2html@EXEEXT@
 639
 640 smbfilter : SHOWFLAGS bin/smbfilter@EXEEXT@
 641
 642 talloctort : SHOWFLAGS bin/talloctort@EXEEXT@
 643
 644 nsswitch : SHOWFLAGS bin/winbindd@EXEEXT@ bin/wbinfo@EXEEXT@ nsswitch/libnss_winbind.@SHLIBEXT@ nsswitch/pam_winbind.@SHLIBEXT@
 645
 646 wins : SHOWFLAGS nsswitch/libnss_wins.@SHLIBEXT@
 647
 648 modules: SHOWFLAGS proto_exists $(VFS_MODULES) $(PDB_MODULES)
 649
 650 everything: all libsmbclient debug2html smbfilter talloctort modules torture
 651
 652 .SUFFIXES:
 653 .SUFFIXES: .c .o .po .po32 .lo
 654
 655 SHOWFLAGS:
 656         @echo "Using FLAGS = $(FLAGS)"
 657         @echo "      FLAGS32 = $(FLAGS32)"
 658         @echo "      LIBS = $(LIBS)"
 659         @echo "      LDSHFLAGS = $(LDSHFLAGS)"
 660         @echo "      LDFLAGS = $(LDFLAGS)"
 661
 662 MAKEDIR = || exec false; \
 663           if test -d "$$dir"; then :; else \
 664           echo mkdir "$$dir"; \
 665           mkdir -p "$$dir" >/dev/null 2>&1 || \
 666           test -d "$$dir" || \
 667           mkdir "$$dir" || \
 668           exec false; fi || exec false
 669
 670 .c.o:
 671         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 672          dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 673         @echo Compiling $*.c
 674         @$(CC) -I. -I$(srcdir) $(FLAGS) -c $< \
 675           -o $@
 676 @BROKEN_CC@     -mv `echo $@ | sed 's%^.*/%%g'` $@
 677
 678 # These dependencies are only approximately correct: we want to make
 679 # sure Samba's paths are updated if ./configure is re-run.  Really it
 680 # would be nice if "make prefix=/opt/samba all" also rebuilt things,
 681 # but since we also require "make install prefix=/opt/samba" *not* to
 682 # rebuild it's a bit hard.
 683
 684 dynconfig.o: dynconfig.c Makefile
 685         @echo Compiling $*.c
 686         @$(CC) $(FLAGS) $(PATH_FLAGS) -c $< -o $@
 687
 688 dynconfig.po: dynconfig.c Makefile
 689         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 690           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 691         @echo Compiling $*.c with @PICFLAG@
 692         @$(CC) -I. -I$(srcdir) $(FLAGS) $(PATH_FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
 693 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
 694 @POBAD_CC@      @mv $*.po.o $@
 695
 696 .c.po:
 697         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 698           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 699         @echo Compiling $*.c with @PICFLAG@
 700         @$(CC) -I. -I$(srcdir) $(FLAGS) @PICFLAG@ -c $< -o $*.@PICSUFFIX@
 701 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po$$%.o%'` $@
 702 @POBAD_CC@      @mv $*.po.o $@
 703
 704 # this is for IRIX
 705 .c.po32:
 706         @if (: >> $@ || : > $@) >/dev/null 2>&1; then rm -f $@; else \
 707           dir=`echo $@ | sed 's,/[^/]*$$,,;s,^$$,.,'` $(MAKEDIR); fi
 708         @echo Compiling $*.c with @PICFLAG@ and -32
 709         @$(CC) -32 -I. -I$(srcdir) $(FLAGS32) $(PATH_FLAGS) @PICFLAG@ -c $< \
 710           -o $*.po32.o
 711 @BROKEN_CC@     -mv `echo $@ | sed -e 's%^.*/%%g' -e 's%\.po32$$%.o%'` $@.o
 712         @mv $*.po32.o $@
 713
 714 bin/.dummy:
 715         @if (: >> $@ || : > $@) >/dev/null 2>&1; then :; else \
 716           dir=bin $(MAKEDIR); fi
 717         @: >> $@ || : > $@ # what a fancy emoticon!
 718
 719 bin/smbd@EXEEXT@: $(SMBD_OBJ) @BUILD_POPT@ bin/.dummy
 720         @echo Linking $@
 721         @$(CC) $(FLAGS) -o $@ $(SMBD_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) \
 722           $(AUTHLIBS) $(ACLLIBS) $(LIBS) @BUILD_POPT@
 723
 724 bin/nmbd@EXEEXT@: $(NMBD_OBJ) @BUILD_POPT@ bin/.dummy
 725         @echo Linking $@
 726         @$(CC) $(FLAGS) -o $@ $(NMBD_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 727
 728 bin/wrepld@EXEEXT@: $(WREPL_OBJ) @BUILD_POPT@ bin/.dummy
 729         @echo Linking $@
 730         @$(CC) $(FLAGS) -o $@ $(WREPL_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 731
 732 bin/swat@EXEEXT@: $(SWAT_OBJ) @BUILD_POPT@ bin/.dummy
 733         @echo Linking $@
 734         @$(CC) $(FLAGS) -o $@ $(SWAT_OBJ) $(LDFLAGS) $(DYNEXP) $(PRINTLIBS) \
 735           $(AUTHLIBS) $(LIBS) @BUILD_POPT@
 736
 737 bin/rpcclient@EXEEXT@: $(RPCCLIENT_OBJ) @BUILD_POPT@ bin/.dummy
 738         @echo Linking $@
 739         @$(CC) $(FLAGS) -o $@ $(RPCCLIENT_OBJ) $(LDFLAGS) $(DYNEXP) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @BUILD_POPT@
 740
 741 bin/smbclient@EXEEXT@: $(CLIENT_OBJ) @BUILD_POPT@ bin/.dummy
 742         @echo Linking $@
 743         @$(CC) $(FLAGS) -o $@ $(CLIENT_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(LIBS) @BUILD_POPT@
 744
 745 bin/net@EXEEXT@: $(NET_OBJ) @BUILD_POPT@ bin/.dummy
 746         @echo Linking $@
 747         @$(CC) $(FLAGS) -o $@ $(NET_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 748
 749 bin/profiles@EXEEXT@: utils/profiles.o @BUILD_POPT@ bin/.dummy
 750         @echo Linking $@
 751         @$(CC) $(FLAGS) -o $@ utils/profiles.o $(LDFLAGS) $(LIBS) @BUILD_POPT@
 752
 753 bin/smbspool@EXEEXT@: $(CUPS_OBJ) bin/.dummy
 754         @echo Linking $@
 755         @$(CC) $(FLAGS) -o $@ $(CUPS_OBJ) $(LDFLAGS) $(LIBS)
 756
 757 bin/smbmount@EXEEXT@: $(MOUNT_OBJ) bin/.dummy
 758         @echo Linking $@
 759         @$(CC) $(FLAGS) -o $@ $(MOUNT_OBJ) $(LDFLAGS) $(LIBS)
 760
 761 bin/smbmnt@EXEEXT@: $(MNT_OBJ) bin/.dummy
 762         @echo Linking $@
 763         @$(CC) $(FLAGS) -o $@ $(MNT_OBJ) $(LDFLAGS)
 764
 765 bin/smbumount@EXEEXT@: $(UMOUNT_OBJ) bin/.dummy
 766         @echo Linking $@
 767         @$(CC) $(FLAGS) -o $@ $(UMOUNT_OBJ) $(LDFLAGS)
 768
 769 bin/testparm@EXEEXT@: $(TESTPARM_OBJ) @BUILD_POPT@ bin/.dummy
 770         @echo Linking $@
 771         @$(CC) $(FLAGS) -o $@ $(TESTPARM_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 772
 773 bin/testprns@EXEEXT@: $(TESTPRNS_OBJ) bin/.dummy
 774         @echo Linking $@
 775         @$(CC) $(FLAGS) -o $@ $(TESTPRNS_OBJ) $(LDFLAGS) $(PRINTLIBS) $(LIBS)
 776
 777 bin/smbstatus@EXEEXT@: $(STATUS_OBJ) @BUILD_POPT@ bin/.dummy
 778         @echo Linking $@
 779         @$(CC) $(FLAGS) -o $@ $(STATUS_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 780
 781 bin/smbcontrol@EXEEXT@: $(SMBCONTROL_OBJ) @BUILD_POPT@ bin/.dummy
 782         @echo Linking $@
 783         @$(CC) -DUSING_SMBCONTROL $(FLAGS) -o $@ $(SMBCONTROL_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 784
 785 bin/smbtree@EXEEXT@: $(SMBTREE_OBJ) @BUILD_POPT@ bin/.dummy
 786         @echo Linking $@
 787         @$(CC) $(FLAGS) -o $@ $(SMBTREE_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 788
 789 bin/smbpasswd@EXEEXT@: $(SMBPASSWD_OBJ) bin/.dummy
 790         @echo Linking $@
 791         @$(CC) $(FLAGS) -o $@ $(SMBPASSWD_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS)
 792
 793 bin/pdbedit@EXEEXT@: $(PDBEDIT_OBJ) @BUILD_POPT@ bin/.dummy
 794         @echo Linking $@
 795         @$(CC) $(FLAGS) -o $@ $(PDBEDIT_OBJ) $(LDFLAGS) $(DYNEXP) $(LIBS) @BUILD_POPT@
 796
 797 bin/smbgroupedit@EXEEXT@: $(SMBGROUPEDIT_OBJ) bin/.dummy
 798         @echo Linking $@
 799         @$(CC) $(FLAGS) -o $@ $(SMBGROUPEDIT_OBJ) $(LDFLAGS) $(LIBS)
 800
 801 bin/nmblookup@EXEEXT@: $(NMBLOOKUP_OBJ) @BUILD_POPT@ bin/.dummy
 802         @echo Linking $@
 803         @$(CC) $(FLAGS) -o $@ $(NMBLOOKUP_OBJ) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 804
 805 bin/smbtorture@EXEEXT@: $(SMBTORTURE_OBJ) bin/.dummy
 806         @echo Linking $@
 807         @$(CC) $(FLAGS) -o $@ $(SMBTORTURE_OBJ) $(LDFLAGS) $(LIBS)
 808
 809 bin/talloctort@EXEEXT@: $(TALLOCTORT_OBJ) bin/.dummy
 810         @echo Linking $@
 811         @$(CC) $(FLAGS) -o $@ $(TALLOCTORT_OBJ) $(LDFLAGS) $(LIBS)
 812
 813 bin/masktest@EXEEXT@: $(MASKTEST_OBJ) bin/.dummy
 814         @echo Linking $@
 815         @$(CC) $(FLAGS) -o $@ $(MASKTEST_OBJ) $(LDFLAGS) $(LIBS)
 816
 817 bin/msgtest@EXEEXT@: $(MSGTEST_OBJ) bin/.dummy
 818         @echo Linking $@
 819         @$(CC) $(FLAGS) -o $@ $(MSGTEST_OBJ) $(LDFLAGS) $(LIBS)
 820
 821 bin/smbcacls@EXEEXT@: $(SMBCACLS_OBJ) @BUILD_POPT@ bin/.dummy
 822         @echo Linking $@
 823         @$(CC) $(FLAGS) -o $@ $(SMBCACLS_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS) @BUILD_POPT@
 824
 825 bin/locktest@EXEEXT@: $(LOCKTEST_OBJ) bin/.dummy
 826         @echo Linking $@
 827         @$(CC) $(FLAGS) -o $@ $(LOCKTEST_OBJ) $(LDFLAGS) $(LIBS)
 828
 829 bin/nsstest@EXEEXT@: $(NSSTEST_OBJ) bin/.dummy
 830         @echo Linking $@
 831         @$(CC) $(FLAGS) -o $@ $(NSSTEST_OBJ) $(LDFLAGS) $(LIBS)
 832
 833 bin/vfstest@EXEEXT@: $(VFSTEST_OBJ) @BUILD_POPT@ bin/.dummy
 834         @echo Linking $@
 835         @$(CC) $(FLAGS) -o $@ $(VFSTEST_OBJ) $(LDFLAGS) $(TERMLDFLAGS) $(TERMLIBS) $(DYNEXP) $(PRINTLIBS) $(AUTHLIBS) $(ACLLIBS) $(LIBS) @BUILD_POPT@
 836
 837 bin/locktest2@EXEEXT@: $(LOCKTEST2_OBJ) bin/.dummy
 838         @echo Linking $@
 839         @$(CC) $(FLAGS) -o $@ $(LOCKTEST2_OBJ) $(LDFLAGS) $(LIBS)
 840
 841 bin/rpctorture@EXEEXT@: $(RPCTORTURE_OBJ) bin/.dummy
 842         @echo Linking $@
 843         @$(CC) $(FLAGS) -o $@ $(RPCTORTURE_OBJ) $(DYNEXP) $(LDFLAGS) $(LIBS)
 844
 845 bin/debug2html@EXEEXT@: $(DEBUG2HTML_OBJ) bin/.dummy
 846         @echo Linking $@
 847         @$(CC) $(FLAGS) -o $@ $(DEBUG2HTML_OBJ) $(LDFLAGS) $(LIBS)
 848
 849 bin/smbfilter@EXEEXT@: $(SMBFILTER_OBJ) bin/.dummy
 850         @echo Linking $@
 851         @$(CC) $(FLAGS) -o $@ $(SMBFILTER_OBJ) $(LDFLAGS) $(LIBS)
 852
 853 bin/smbw_sample@EXEEXT@: $(SMBW_OBJ) utils/smbw_sample.o bin/.dummy
 854         @echo Linking $@
 855         @$(CC) $(FLAGS) -o $@ $(SMBW_OBJ) utils/smbw_sample.o $(LDFLAGS) $(LIBS)
 856
 857 bin/smbsh@EXEEXT@: $(SMBSH_OBJ) bin/.dummy
 858         @echo Linking $@
 859         @$(CC) $(FLAGS) -o $@ $(SMBSH_OBJ) $(LDFLAGS) $(LIBS)
 860
 861 bin/smbwrapper.@SHLIBEXT@: $(PICOBJS) bin/.dummy
 862         @echo Linking shared library $@
 863         @$(SHLD) $(LDSHFLAGS) -o $@ $(PICOBJS) $(LIBS) \
 864                 @SONAMEFLAG@`basename $@`
 865
 866 bin/smbwrapper.32.@SHLIBEXT@: $(PICOBJS32)
 867         @echo Linking shared library $@
 868         @$(SHLD) -32 $(LDSHFLAGS) -o $@ $(PICOBJS32) $(LIBS) \
 869                 @SONAMEFLAG@`basename $@`
 870
 871 bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS)
 872         @echo Linking libsmbclient shared library $@
 873         $(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \
 874                 @SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR)
 875
 876 bin/libsmbclient.a: $(LIBSMBCLIENT_PICOBJS)
 877         @echo Linking libsmbclient non-shared library $@
 878         -$(AR) -rc $@ $(LIBSMBCLIENT_PICOBJS)
 879
 880 bin/libbigballofmud.@SHLIBEXT@: $(LIBBIGBALLOFMUD_PICOBJS)
 881         @echo Linking bigballofmud shared library $@
 882         $(SHLD) $(LDSHFLAGS) -o $@ $(LIBBIGBALLOFMUD_PICOBJS) $(LIBS) \
 883                 @SONAMEFLAG@`basename $@`.$(LIBBIGBALLOFMUD_MAJOR)
 884
 885 # It would be nice to build a static bigballofmud too, but when I try
 886 # I get linker errors about dl_open and similar things.  I'm not sure
 887 # if it can be fixed or if they just can't be called from a static
 888 # library.
 889
 890 libsmbclient: $(LIBSMBCLIENT)
 891
 892 bin/librpc_lsarpc.@SHLIBEXT@: $(RPC_LSA_OBJ)
 893         @echo "Linking $@"
 894         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_LSA_OBJ) -lc \
 895                 @SONAMEFLAG@`basename $@`
 896
 897 bin/librpc_samr.@SHLIBEXT@: $(RPC_SAMR_OBJ)
 898         @echo "Linking $@"
 899         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SAMR_OBJ) -lc \
 900                 @SONAMEFLAG@`basename $@`
 901
 902 bin/librpc_srvsvc.@SHLIBEXT@: $(RPC_SVC_OBJ)
 903         @echo "Linking $@"
 904         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SVC_OBJ) -lc \
 905                 @SONAMEFLAG@`basename $@`
 906
 907 bin/librpc_wkssvc.@SHLIBEXT@: $(RPC_WKS_OBJ)
 908         @echo "Linking $@"
 909         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_WKS_OBJ) -lc \
 910                 @SONAMEFLAG@`basename $@`
 911
 912 bin/librpc_NETLOGON.@SHLIBEXT@: $(RPC_NETLOG_OBJ)
 913         @echo "Linking $@"
 914         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_NETLOG_OBJ) -lc \
 915                 @SONAMEFLAG@`basename $@`
 916
 917 bin/librpc_winreg.@SHLIBEXT@: $(RPC_REG_OBJ)
 918         @echo "Linking $@"
 919         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_REG_OBJ) -lc \
 920                 @SONAMEFLAG@`basename $@`
 921
 922 bin/librpc_spoolss.@SHLIBEXT@: $(RPC_SPOOLSS_OBJ)
 923         @echo "Linking $@"
 924         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_SPOOLSS_OBJ) -lc \
 925                 @SONAMEFLAG@`basename $@`
 926
 927 bin/librpc_netdfs.@SHLIBEXT@: $(RPC_DFS_OBJ)
 928         @echo "Linking $@"
 929         @$(SHLD) $(LDSHFLAGS) -o $@ $(RPC_DFS_OBJ) -lc \
 930                 @SONAMEFLAG@`basename $@`
 931
 932 nsswitch/libnss_wins.@SHLIBEXT@: $(NSS_OBJ)
 933         @echo "Linking $@"
 934         @$(SHLD) $(LDSHFLAGS) -o $@ $(NSS_OBJ) -lc \
 935                 @SONAMEFLAG@`basename $@`
 936
 937 bin/winbindd@EXEEXT@: $(WINBINDD_OBJ) @BUILD_POPT@ bin/.dummy
 938         @echo Linking $@
 939         @$(LINK) -o $@ $(WINBINDD_OBJ) $(DYNEXP) $(LIBS) @BUILD_POPT@
 940
 941 nsswitch/@WINBIND_NSS@.@SHLIBEXT@: $(WINBIND_NSS_PICOBJS)
 942         @echo "Linking $@"
 943         @$(SHLD) $(WINBIND_NSS_LDSHFLAGS) -o $@ $(WINBIND_NSS_PICOBJS) \
 944                 @WINBIND_NSS_EXTRA_LIBS@ @SONAMEFLAG@`basename $@`
 945
 946 nsswitch/pam_winbind.@SHLIBEXT@: $(PAM_WINBIND_OBJ) bin/.dummy
 947         @echo Linking $@
 948         @$(SHLD) $(LDSHFLAGS) -o $@ $(PAM_WINBIND_OBJ) \
 949                 @SONAMEFLAG@`basename $@` -lpam
 950
 951 bin/pdb_mysql.@SHLIBEXT@: $(PDB_MYSQL_OBJ)
 952         @echo "Building plugin $@"
 953         @$(SHLD) $(LDSHFLAGS) -o $@ $(PDB_MYSQL_OBJ) @MYSQL_LIBS@ \
 954                 @SONAMEFLAG@`basename $@`
 955
 956 bin/pdb_xml.@SHLIBEXT@: $(PDB_XML_OBJ)
 957         @echo "Building plugin $@"
 958         @$(SHLD) $(LDSHFLAGS) -o $@ $(PDB_XML_OBJ) @XML_LIBS@ \
 959                 @SONAMEFLAG@`basename $@`
 960
 961 bin/vfs_audit.@SHLIBEXT@: $(VFS_AUDIT_OBJ)
 962         @echo "Building plugin $@"
 963         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_AUDIT_OBJ) \
 964                 @SONAMEFLAG@`basename $@`
 965
 966 bin/vfs_extd_audit.@SHLIBEXT@: $(VFS_EXTD_AUDIT_OBJ)
 967         @echo "Building plugin $@"
 968         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_AUDIT_OBJ) \
 969                 @SONAMEFLAG@`basename $@`
 970
 971 bin/vfs_recycle.@SHLIBEXT@: $(VFS_RECYCLE_OBJ)
 972         @echo "Building plugin $@"
 973         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_RECYCLE_OBJ) \
 974                 @SONAMEFLAG@`basename $@`
 975
 976 bin/vfs_netatalk.@SHLIBEXT@: $(VFS_NETATALK_OBJ)
 977         @echo "Building plugin $@"
 978         @$(SHLD) $(LDSHFLAGS) -o $@ $(VFS_NETATALK_OBJ) \
 979                 @SONAMEFLAG@`basename $@`
 980
 981 bin/wbinfo@EXEEXT@: $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 982                 $(UBIQX_OBJ) $(SECRETS_OBJ) @BUILD_POPT@ bin/.dummy
 983         @echo Linking $@
 984         @$(LINK) -o $@ $(WBINFO_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 985                 $(UBIQX_OBJ) $(SECRETS_OBJ) $(LIBS) @BUILD_POPT@
 986
 987 bin/ntlm_auth@EXEEXT@: $(NTLM_AUTH_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 988                 $(UBIQX_OBJ) @BUILD_POPT@ bin/.dummy
 989         @echo Linking $@
 990         @$(LINK) -o $@ $(NTLM_AUTH_OBJ) $(PARAM_OBJ) $(LIB_OBJ) \
 991                 $(UBIQX_OBJ) $(LIBS) @BUILD_POPT@
 992
 993 bin/pam_smbpass.@SHLIBEXT@: $(PAM_SMBPASS_PICOOBJ)
 994         @echo "Linking shared library $@"
 995         $(SHLD) $(LDSHFLAGS) -o $@ $(PAM_SMBPASS_PICOOBJ) -lpam $(DYNEXP) $(LIBS) -lc
 996
 997 bin/libmsrpc.a: $(LIBMSRPC_PICOBJ)
 998         -$(AR) -rc $@ $(LIBMSRPC_PICOBJ)
 999
1000 bin/tdbbackup@EXEEXT@: $(TDBBACKUP_OBJ) bin/.dummy
1001         @echo Linking $@
1002         @$(CC) $(FLAGS) -o $@ $(TDBBACKUP_OBJ)
1003
1004 bin/t_strcmp@EXEEXT@: bin/libbigballofmud.@SHLIBEXT@ torture/t_strcmp.o
1005         $(CC) $(FLAGS) -o $@ $(LIBS) torture/t_strcmp.o -L ./bin -lbigballofmud
1006
1007 bin/t_stringoverflow@EXEEXT@: bin/libbigballofmud.@SHLIBEXT@ torture/t_stringoverflow.o
1008         $(CC) $(FLAGS) -o $@ torture/t_stringoverflow.o -L./bin -lbigballofmud
1009
1010 bin/t_doschar@EXEEXT@: bin/libbigballofmud.@SHLIBEXT@ torture/t_doschar.o
1011         $(CC) $(FLAGS) -o $@ $(LIBS) torture/t_doschar.o -L ./bin -lbigballofmud
1012 bin/t_push_ucs2@EXEEXT@: bin/libbigballofmud.@SHLIBEXT@ torture/t_push_ucs2.o
1013         $(CC) $(FLAGS) -o $@ $(LIBS) torture/t_push_ucs2.o -L ./bin -lbigballofmud
1014
1015 install: installbin installman installscripts installdat installswat
1016
1017 install-everything: install installmodules
1018
1019 # DESTDIR is used here to prevent packagers wasting their time
1020 # duplicating the Makefile. Remove it and you will have the privelege
1021 # of package each samba release for muliple versions of multiple
1022 # distributions and operating systems, or at least supplying patches
1023 # to all the packaging files required for this, prior to committing
1024 # the removal of DESTDIR. Do not remove it even though you think it
1025 # is not used
1026
1027 installdirs:
1028         @$(SHELL) $(srcdir)/script/installdirs.sh $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(PRIVATEDIR) $(DESTDIR)$(VFSLIBDIR) $(DESTDIR)$(PDBLIBDIR) $(DESTDIR)$(PIDDIR) $(DESTDIR)$(LOCKDIR)
1029
1030 installservers: all installdirs
1031         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
1032
1033 installbin: all installdirs
1034         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(SBIN_PROGS)
1035         @$(SHELL) $(srcdir)/script/installbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(BIN_PROGS)
1036
1037         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(RPCLIBDIR) $(RPC_MODULES)
1038
1039 installmodules: all installdirs
1040         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(VFSLIBDIR) $(VFS_MODULES)
1041         @$(SHELL) $(srcdir)/script/installmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(PDBLIBDIR) $(PDB_MODULES)
1042
1043 installscripts: installdirs
1044         @$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
1045
1046 installdat: installdirs
1047         @$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR)$(LIBDIR) $(srcdir)
1048
1049 installswat: installdirs
1050         @$(SHELL) $(srcdir)/script/installswat.sh $(DESTDIR)$(SWATDIR) $(srcdir)
1051
1052 installclientlib:
1053         -$(INSTALLCLIENTCMD_SH) bin/libsmbclient.@SHLIBEXT@ $(DESTDIR)${prefix}/lib
1054         -$(INSTALLCLIENTCMD_A) bin/libsmbclient.a $(DESTDIR)${prefix}/lib
1055         -$(INSTALLCMD) -d $(DESTDIR)${prefix}/include
1056         -$(INSTALLCMD) $(srcdir)/include/libsmbclient.h $(DESTDIR)${prefix}/include
1057
1058 # Python extensions
1059
1060 PYTHON_OBJS = $(PARAM_OBJ) $(LIB_OBJ) $(LIBSMB_OBJ) $(RPC_PARSE_OBJ) \
1061         $(UBIQX_OBJ) $(LIBMSRPC_OBJ) $(PASSDB_OBJ) $(GROUPDB_OBJ) \
1062         $(SECRETS_OBJ) $(KRBCLIENT_OBJ)
1063
1064 PYTHON_PICOBJS = $(PYTHON_OBJS:.o=.po)
1065
1066 python_ext: $(PYTHON_PICOBJS)
1067         @if test -z "$(PYTHON)"; then \
1068                 echo Use the option --with-python to configure python; \
1069                 exit 1; \
1070         fi
1071         PYTHON_OBJS="$(PYTHON_PICOBJS)" \
1072         PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS) $(FLAGS)" \
1073         LIBS="$(LIBS) $(PASSDBLIBS) $(KRB5LIBS)" \
1074                 $(PYTHON) python/setup.py build
1075
1076 python_install: $(PYTHON_PICOBJS)
1077         @if test -z "$(PYTHON)"; then \
1078                 echo Use the option --with-python to configure python; \
1079                 exit 1; \
1080         fi
1081         PYTHON_OBJS="$(PYTHON_PICOBJS)" \
1082         PYTHON_CFLAGS="$(CFLAGS) $(CPPFLAGS)" \
1083         LIBS="$(LIBS)" \
1084                 $(PYTHON) python/setup.py install
1085
1086 python_clean:
1087         @-if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi
1088
1089 # revert to the previously installed version
1090 revert:
1091         @$(SHELL) $(srcdir)/script/revert.sh $(SBINDIR) $(SBIN_PROGS)
1092         @$(SHELL) $(srcdir)/script/revert.sh $(BINDIR) $(BIN_PROGS) $(SCRIPTS)
1093
1094 installman:
1095         @$(SHELL) $(srcdir)/script/installman.sh $(DESTDIR)$(MANDIR) $(srcdir) $(man_langs) "@ROFF@"
1096
1097 .PHONY: showlayout
1098
1099 showlayout:
1100         @echo "Samba will be installed into:"
1101         @echo "  basedir: $(BASEDIR)"
1102         @echo "  bindir:  $(BINDIR)"
1103         @echo "  sbindir: $(SBINDIR)"
1104         @echo "  libdir:  $(LIBDIR)"
1105         @echo "  vardir:  $(VARDIR)"
1106         @echo "  mandir:  $(MANDIR)"
1107
1108
1109 uninstall: uninstallman uninstallbin uninstallscripts
1110
1111 uninstallman:
1112         @$(SHELL) $(srcdir)/script/uninstallman.sh $(DESTDIR)$(MANDIR) $(srcdir) $(man_langs)
1113
1114 uninstallbin:
1115         @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(SBINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(SBIN_PROGS)
1116         @$(SHELL) $(srcdir)/script/uninstallbin.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(BINDIR) $(DESTDIR)$(LIBDIR) $(DESTDIR)$(VARDIR) $(DESTDIR)$(BIN_PROGS)
1117         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(RPCLIBDIR) $(DESTDIR)$(RPC_MODULES)
1118
1119 uninstallmodules:
1120         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(PDBLIBDIR) $(DESTDIR)$(VFS_MODULES)
1121         @$(SHELL) $(srcdir)/script/uninstallmodules.sh $(INSTALLPERMS) $(DESTDIR)$(BASEDIR) $(DESTDIR)$(VFSLIBDIR) $(DESTDIR)$(PDB_MODULES)
1122
1123 uninstallscripts:
1124         @$(SHELL) $(srcdir)/script/uninstallscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
1125
1126 # Toplevel clean files
1127 TOPFILES=dynconfig.o dynconfig.po
1128
1129 clean: delheaders python_clean
1130         -rm -f core */*~ *~ */*.o */*.po */*.po32 */*.@SHLIBEXT@ \
1131                 $(TOPFILES) $(BIN_PROGS) $(SBIN_PROGS) $(MODULES) $(TORTURE_PROGS) \
1132                 $(LIBSMBCLIENT) $(EVERYTHING_PROGS) .headers.stamp
1133
1134
1135 # Making this target will just make sure that the prototype files
1136 # exist, not necessarily that they are up to date.  Since they're
1137 # removed by "make clean" this will always be run when you do anything
1138 # afterwards.
1139 proto_exists: include/proto.h include/wrepld_proto.h include/build_env.h \
1140         nsswitch/winbindd_proto.h web/swat_proto.h \
1141         client/client_proto.h utils/net_proto.h
1142
1143 delheaders:
1144         @echo Removing prototype headers
1145         @/bin/rm -f $(srcdir)/include/proto.h $(srcdir)/include/build_env.h
1146         @/bin/rm -f $(srcdir)/include/wrepld_proto.h $(srcdir)/nsswitch/winbindd_proto.h
1147         @/bin/rm -f $(srcdir)/web/swat_proto.h
1148         @/bin/rm -f $(srcdir)/client/client_proto.h $(srcdir)/utils/net_proto.h
1149
1150         @/bin/rm -f include/proto.h include/build_env.h include/wrepld_proto.h \
1151                     nsswitch/winbindd_proto.h web/swat_proto.h \
1152                     client/client_proto.h utils/net_proto.h
1153
1154 include/proto.h:
1155         @echo Building include/proto.h
1156         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1157           -h _PROTO_H_ $(builddir)/include/proto.h \
1158           $(PROTO_OBJ)
1159
1160 include/build_env.h:
1161         @echo Building include/build_env.h
1162         @cd $(srcdir) && $(SHELL) script/build_env.sh $(srcdir) $(builddir) $(CC) > $(builddir)/include/build_env.h
1163
1164 include/wrepld_proto.h:
1165         @echo Building include/wrepld_proto.h
1166         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1167           -h _WREPLD_PROTO_H_ $(builddir)/include/wrepld_proto.h \
1168           $(WREPL_OBJ1)
1169
1170 nsswitch/winbindd_proto.h:
1171         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1172           -h _WINBINDD_PROTO_H_ nsswitch/winbindd_proto.h \
1173           $(WINBINDD_OBJ1)
1174
1175 web/swat_proto.h:
1176         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1177           -h _SWAT_PROTO_H_ web/swat_proto.h \
1178           $(SWAT_OBJ1)
1179
1180 client/client_proto.h:
1181         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1182           -h _CLIENT_PROTO_H_ client/client_proto.h \
1183           $(CLIENT_OBJ1)
1184
1185 utils/net_proto.h:
1186         @cd $(srcdir) && $(SHELL) script/mkproto.sh $(AWK) \
1187           -h _CLIENT_PROTO_H_ utils/net_proto.h \
1188           $(NET_OBJ1)
1189
1190 # "make headers" or "make proto" calls a subshell because we need to
1191 # make sure these commands are executed in sequence even for a
1192 # parallel make.
1193 headers:
1194         $(MAKE) delheaders; \
1195         $(MAKE) include/proto.h; \
1196         $(MAKE) include/build_env.h; \
1197         $(MAKE) include/wrepld_proto.h; \
1198         $(MAKE) nsswitch/winbindd_proto.h; \
1199         $(MAKE) web/swat_proto.h; \
1200         $(MAKE) client/client_proto.h; \
1201         $(MAKE) utils/net_proto.h
1202
1203 proto: headers
1204
1205 .PHONY: headers proto
1206
1207 etags:
1208         etags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
1209
1210 ctags:
1211         ctags `find $(srcdir) -name "*.[ch]" | grep -v /CVS/`
1212
1213 realclean: clean delheaders
1214         -rm -f config.log bin/.dummy script/findsmb
1215
1216 distclean: realclean
1217         -rm -f include/stamp-h
1218         -rm -f include/config.h Makefile
1219         -rm -f config.status config.cache so_locations
1220         -rm -rf .deps
1221
1222 # this target is really just for my use. It only works on a limited
1223 # range of machines and is used to produce a list of potentially
1224 # dead (ie. unused) functions in the code. (tridge)
1225 finddead:
1226         nm */*.o |grep 'U ' | awk '{print $$2}' | sort -u > nmused.txt
1227         nm */*.o |grep 'T ' | awk '{print $$3}' | sort -u > nmfns.txt
1228         comm -13 nmused.txt nmfns.txt
1229
1230
1231 # when configure.in is updated, reconfigure
1232 $(srcdir)/configure: $(srcdir)/configure.in
1233         @echo "WARNING: you need to rerun ./autogen.sh"
1234
1235 config.status: $(srcdir)/configure
1236         @echo "WARNING: you need to run ./configure"
1237
1238 Makefile: $(srcdir)/Makefile.in config.status
1239         @echo "WARNING: you need to run ./config.status"
1240
1241 ######################################################################
1242 # Samba Testing Framework
1243
1244 # FIXME: LD_LIBRARY_PATH is not portable, but in the absence of
1245 # libtool I don't know a better way to do it.  Perhaps we should fix
1246 # libbigballofmud to link statically?
1247
1248 check: check-programs
1249         LD_LIBRARY_PATH="`pwd`/bin:$$LD_LIBRARY_PATH" \
1250         PATH="`pwd`/bin:$$PATH" \
1251         python stf/standardcheck.py
1252
1253 # These are called by the test suite
1254 check-programs: bin/t_strcmp bin/t_push_ucs2 bin/smbcontrol
1255