s3:idmap_autorid: move HWM initialization into a function

[Samba/gebeck_regimport.git] / docs-xml / Samba3-ByExample / SBE-KerberosFastStart.xml

<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE chapter PUBLIC "-//Samba-Team//DTD DocBook V4.2-Based Variant V1.0//EN" "http://www.samba.org/samba/DTD/samba-doc">
<chapter id="kerberos">
  <title>Active Directory, Kerberos, and Security</title>

    <para><indexterm>
        <primary>experiment</primary>
      </indexterm>
        By this point in the book, you have been exposed to many Samba-3 features and capabilities.
        More importantly, if you have implemented the examples given, you are well on your way to becoming 
        a Samba-3 networking guru who knows a lot about Microsoft Windows. If you have taken the time to 
        practice, you likely have thought of improvements and scenarios with which you can experiment. You 
        are rather well plugged in to the many flexible ways Samba can be used.
        </para>

    <para><indexterm>
        <primary>criticism</primary>
      </indexterm>
        This is a book about Samba-3. Understandably, its intent is to present it in a positive light. 
        The casual observer might conclude that this book is one-eyed about Samba. It is &smbmdash; what 
        would you expect? This chapter exposes some criticisms that have been raised concerning 
        the use of Samba. For each criticism, there are good answers and appropriate solutions.
        </para>

        <para>
        Some criticism always comes from deep inside ranks that one would expect to be supportive of a particular 
        decision. Criticism can be expected from the outside. Let's see how the interesting dynamic of 
        criticism develops with respect to Abmas.
        </para>

    <para><indexterm>
        <primary>straw-man</primary>
      </indexterm>
        This chapter provides a shameless self-promotion of Samba-3. The objections raised were not pulled
        out of thin air. They were drawn from comments made by Samba users and from criticism during 
        discussions with Windows network administrators. The tone of the objections reflects as closely 
        as possible that of the original. The case presented is a straw-man example that is designed to 
        permit each objection to be answered as it might occur in real life.
        </para>

<sect1>
        <title>Introduction</title>

      <para><indexterm>
          <primary>acquisitions</primary>
        </indexterm><indexterm>
          <primary>risk</primary>
        </indexterm><indexterm>
          <primary>assessment</primary>
        </indexterm><indexterm>
          <primary>Active Directory</primary>
        </indexterm><indexterm>
          <primary>Windows 2003 Serve</primary>
        </indexterm>
        Abmas is continuing its meteoric growth with yet further acquisitions. The investment community took
        note of the spectacular projection of Abmas onto the global business stage. Abmas is building an
        interesting portfolio of companies that includes accounting services, financial advice, investment
        portfolio management, property insurance, risk assessment, and the recent addition of a a video rental
        business. The pieces do not always appear to fit together, but Mr. Meany is certainly executing an 
        interesting business growth and development plan. Abmas Video Rentals was recently acquired. 
        During the time that the acquisition was closing, the Video Rentals business upgraded its Windows 
        NT4-based network to Windows 2003 Server and Active Directory.
        </para>

      <para><indexterm>
          <primary>Active Directory</primary>
        </indexterm>
        You have accepted the fact that Abmas Video Rentals will use Microsoft Active Directory.
        The IT team, led by Stan Soroka, is committed to Samba-3 and to maintaining a uniform technology platform. 
        Stan Soroka's team voiced its disapproval over the decision to permit this business to continue to 
        operate with a solution that is viewed by Christine and her group as <quote>an island of broken 
        technologies.</quote> This comment was made by one of Christine's staff as they were installing a new 
        Samba-3 server at the new business.
        </para>


      <para><indexterm>
          <primary>consultant</primary>
        </indexterm><indexterm>
          <primary>hypothetical</primary>
        </indexterm>
        Abmas Video Rentals' head of IT heard of this criticism. He was offended that a junior engineer
        should make such a comment. He felt that he had to prepare in case he might be criticized for his 
        decision to use Active Directory. He decided he would defend his decision by hiring the services 
        of an outside security systems consultant to report<footnote><para>This report is entirely fictitious. 
                        Any resemblance to a factual report is purely coincidental.</para></footnote> on his unit's operations 
        and to investigate the role of Samba at his site. Here are key extracts from this hypothetical 
        report:
        </para>

      <blockquote><para><indexterm>
            <primary>vulnerabilities</primary>
          </indexterm><indexterm>
            <primary>integrity</primary>
          </indexterm><indexterm>
            <primary>practices</primary>
          </indexterm><indexterm>
            <primary>Active Directory</primary>
          </indexterm>
        ... the implementation of Microsoft Active Directory at the Abmas Video Rentals, Bamingsham site,
         has been examined. We find no evidence to support a notion that vulnerabilities exist at your site.  
        ... we took additional steps to validate the integrity of the installation and operation of Active 
        Directory and are pleased that your staff are following sound practices.
        </para>

        <para>
        ...
        </para>

        <para><indexterm>
            <primary>accounts</primary>
            <secondary>user</secondary>
          </indexterm><indexterm>
            <primary>accounts</primary>
            <secondary>group</secondary>
          </indexterm><indexterm>
            <primary>Backup</primary>
          </indexterm><indexterm>
            <primary>disaster recovery</primary>
          </indexterm><indexterm>
            <primary>validated</primary>
          </indexterm><indexterm>
            <primary>off-site storage</primary>
          </indexterm>
        User and group accounts, and respective privileges, have been well thought out. File system shares are
        appropriately secured. Backup and disaster recovery plans are well managed and validated regularly, and
        effective off-site storage practices are considered to exceed industry norms.
        </para>

        <para><indexterm>
            <primary>compromise</primary>
          </indexterm><indexterm>
            <primary>secure</primary>
          </indexterm><indexterm>
            <primary>network</primary>
            <secondary>secure</secondary>
          </indexterm>
        Your staff are justifiably concerned that the use of Samba may compromise their good efforts to maintain
        a secure network. 
        </para>

        <para><indexterm>
            <primary>winbind</primary>
          </indexterm><indexterm>
            <primary>security</primary>
          </indexterm><indexterm>
            <primary>secure</primary>
          </indexterm><indexterm>
            <primary>network</primary>
            <secondary>management</secondary>
          </indexterm>
        The recently installed Linux file and application server uses a tool called <command>winbind</command> 
        that is indiscriminate about security. All user accounts in Active Directory can be used to access data 
        stored on the Linux system. We are alarmed that secure information is accessible to staff who should 
        not even be aware that it exists. We share the concerns of your network management staff who have gone 
        to great lengths to set fine-grained controls that limit information access to those who need access. 
        It seems incongruous to us that Samba winbind should be permitted to be used considering that it voids this fine work.
        </para>

        <para><indexterm>
            <primary>isolated</primary>
          </indexterm><indexterm>
            <primary>firewall</primary>
          </indexterm><indexterm>
            <primary>best practices</primary>
          </indexterm>
        Graham Judd [head of network administration] has locked down the security of all systems and is following 
        the latest Microsoft guidelines. ... null session connections have been disabled ... the internal network 
        is isolated from the outside world, the [product name removed] firewall is under current contract 
        maintenance support from [the manufacturer].  ... our attempts to penetrate security of your systems 
        failed to find problems common to Windows networking sites. We commend your staff on their attention to 
        detail and for following Microsoft recommended best practices.
        </para>

        <para>
        ...
        </para>

        <para><indexterm>
            <primary>security</primary>
          </indexterm><indexterm>
            <primary>disable</primary>
          </indexterm><indexterm>
            <primary>essential</primary>
          </indexterm><indexterm>
            <primary>trusted computing</primary>
          </indexterm>
        Regarding the use of Samba, we offer the following comments: Samba is in use in nearly half of
        all sites we have surveyed. ... It is our opinion that Samba offers no better security than Microsoft
        ... what worries us regarding Samba is the need to disable essential Windows security features such as
        secure channel support, digital sign'n'seal on all communication traffic, and running Active Directory in
        mixed mode so that Samba clients and servers can authenticate all of it. Additionally, we are concerned that
        Samba is not at the full capabilities of Microsoft Windows NT4 server. Microsoft has moved well beyond that
        with trusted computing initiatives that the Samba developers do not participate in.
        </para>

        <para><indexterm>
            <primary>integrity</primary>
          </indexterm><indexterm>
            <primary>hackers</primary>
          </indexterm><indexterm>
            <primary>accountable</primary>
          </indexterm><indexterm>
            <primary>flaws</primary>
          </indexterm><indexterm>
            <primary>updates</primary>
          </indexterm><indexterm>
            <primary>bug fixes</primary>
          </indexterm><indexterm>
            <primary>alarm</primary>
          </indexterm>
        One wonders about the integrity of an open source program that is developed by a team of hackers 
        who cannot be held accountable for the flaws in their code. The sheer number of updates and bug
        fixes they have released should ring alarm bells in any business.
        </para>

        <para><indexterm>
            <primary>employment</primary>
          </indexterm><indexterm>
            <primary>jobs</primary>
          </indexterm><indexterm>
            <primary>risk</primary>
          </indexterm>
        Another factor that should be considered is that buying Microsoft products and services helps to 
        provide employment in the IT industry. Samba and Open Source software place those jobs at risk.
        </para></blockquote>

      <para><indexterm>
          <primary>Active Directory</primary>
        </indexterm><indexterm>
          <primary>independent expert</primary>
        </indexterm>
        This is also a challenge to rise above the trouble spot. You call Stan's team together for a simple 
        discussion, but it gets further out of hand.  When you return to your office, you find the following 
        email in your in-box:
        </para>

        <para>
        Good afternoon,
        </para>

        <blockquote><attribution>Stan</attribution><para>
        I apologize for the leak of internal discussions to the new business. It reflects poorly on our 
        professionalism and has put you in an unpleasant position. I regret the incident.
        </para>

        <para>
        I also wish to advise that two of the recent recruits want to implement Kerberos authentication 
        across all systems. I concur with the desire to improve security. One of the new guys who is championing
        the move to Kerberos was responsible for the comment that caused the embarrassment.
        </para>

        <para><indexterm>
            <primary>Kerberos</primary>
          </indexterm><indexterm>
            <primary>OpenLDAP</primary>
          </indexterm><indexterm>
            <primary>Active Directory</primary>
          </indexterm><indexterm>
            <primary>consultant</primary>
          </indexterm>
        I am experiencing difficulty in handling the sharp push for Kerberos. He claims that Kerberos, OpenLDAP, 
        plus Samba-3 will seamlessly replace Microsoft Active Directory. I am a little out of my depth with respect 
        to the feasibility of such a move, but have taken steps to pull both of them into line. With your consent, 
        I would like to hire the services of a well-known Samba consultant to set the record straight.
        </para>

        <para><indexterm>
            <primary>criticism</primary>
          </indexterm><indexterm>
            <primary>policy</primary>
          </indexterm><indexterm>
            <primary>Windows Servers</primary>
          </indexterm><indexterm>
            <primary>Active Directory</primary>
          </indexterm><indexterm>
            <primary>budgetted</primary>
          </indexterm><indexterm>
            <primary>financial responsibility</primary>
          </indexterm>
        I intend to use this report to answer the criticism raised and would like to establish a policy that we
        will approve the use of Microsoft Windows Servers (and Active Directory) subject to all costs being covered 
        out of the budget of the division that wishes to go its own way. I propose that dissenters will still remain
        responsible to meet the budgeted contribution to IT operations as a whole. I believe we should not coerce 
        use of any centrally proposed standards, but make all noncompliance the financial responsibility of the 
        out-of-step division. Hopefully, this will encourage all divisions to walk with us and not alone.
        </para></blockquote>

        <sect2>
                <title>Assignment Tasks</title>

                <para>
                You agreed with Stan's recommendations and hired a consultant to help defuse the powder
                keg. The consultant's task is to provide a tractable answer to each of the issues raised. The consultant must be able
                to support his or her claims, keep emotions to the side, and answer technically.
                </para>

        </sect2>
</sect1>

<sect1>
        <title>Dissection and Discussion</title>

      <para><indexterm>
          <primary>tool</primary>
        </indexterm><indexterm>
          <primary>benefit</primary>
        </indexterm><indexterm>
          <primary>choice</primary>
        </indexterm><indexterm>
          <primary>consultant</primary>
        </indexterm><indexterm>
          <primary>installation</primary>
        </indexterm><indexterm>
          <primary>income</primary>
        </indexterm><indexterm>
          <primary>employment</primary>
        </indexterm>
        Samba-3 is a tool. No one is pounding your door to make you use Samba. That is a choice that you are free to 
        make or reject. It is likely that your decision to use Samba can greatly benefit your company. 
        The Samba Team obviously believes that the Samba software is a worthy choice. 
        If you hire a consultant to assist with the installation and/or deployment of Samba, or if you hire 
        someone to help manage your Samba installation, you can create income and employment. Alternately, 
        money saved by not spending in the IT area can be spent elsewhere in the business. All money saved 
        or spent creates employment.
        </para>

      <para><indexterm>
          <primary>economically sustainable</primary>
        </indexterm><indexterm>
          <primary>inter-operability</primary>
        </indexterm><indexterm>
          <primary>file and print service</primary>
        </indexterm><indexterm>
          <primary>cost</primary>
        </indexterm><indexterm>
          <primary>alternative</primary>
        </indexterm>
        In the long term, the use of Samba must be economically sustainable. In some situations, Samba is adopted
        purely to provide file and print service interoperability on platforms that otherwise cannot provide 
        access to data and to printers for Microsoft Windows clients. Samba is used by some businesses to
        effect a reduction in the cost of providing IT services. Obviously, it is also used by some as an 
        alternative to the use of a Microsoft file and print serving platforms with no consideration of costs.
        </para>

      <para><indexterm>
          <primary>documentation</primary>
        </indexterm><indexterm>
          <primary>responsibility</primary>
        </indexterm><indexterm>
          <primary>fix</primary>
        </indexterm><indexterm>
          <primary>broken</primary>
        </indexterm>
        It would be foolish to adopt a technology that might put any data or users at risk. Security affects 
        everyone. The Samba-Team is fully cognizant of the responsibility they have to their users. 
        The Samba documentation clearly reveals that full responsibility is accepted to fix anything 
        that is broken.
        </para>

      <para><indexterm>
          <primary>commercial</primary>
        </indexterm><indexterm>
          <primary>software</primary>
        </indexterm><indexterm>
          <primary>commercial software</primary>
        </indexterm><indexterm>
          <primary>End User License Agreement</primary>
          <see>EULA</see>
        </indexterm><indexterm>
          <primary>accountable</primary>
        </indexterm><indexterm>
          <secondary>liability</secondary>
        </indexterm><indexterm>
          <primary>accepts liability</primary>
        </indexterm><indexterm>
          <primary>price paid</primary>
        </indexterm><indexterm>
          <primary>product defects</primary>
        </indexterm><indexterm>
          <primary>reimburse</primary>
        </indexterm><indexterm>
          <primary>extent</primary>
        </indexterm>
        There is a mistaken perception in the IT industry that commercial software providers are fully 
        accountable for the defects in products. Open Source software comes with no warranty, so it is 
        often assumed that its use confers a higher degree of risk. Everyone should read commercial software 
        End User License Agreements (EULAs). You should determine what real warranty is offered and the 
        extent of liability that is accepted. Doing so soon dispels the popular notion that
        commercial software vendors are willingly accountable for product defects. In many cases, the
        commercial vendor accepts liability only to reimburse the price paid for the software. 
        </para>

      <para><indexterm>
          <primary>consumer</primary>
        </indexterm><indexterm>
          <primary>EULA</primary>
        </indexterm><indexterm>
          <primary>track record</primary>
        </indexterm><indexterm>
          <primary>commercial software</primary>
        </indexterm><indexterm>
          <primary>support</primary>
        </indexterm><indexterm>
          <primary>vendor</primary>
        </indexterm>
        The real issues that a consumer (like you) needs answered are What is the way of escape from technical 
        problems, and how long will it take? The average problem turnaround time in the Open Source community is 
        approximately 48 hours. What does the EULA offer? What is the track record in the commercial software 
        industry? What happens when your commercial vendor decides to cease providing support?
        </para>

      <para><indexterm>
          <primary>source code</primary>
        </indexterm><indexterm>
          <primary>Open Source</primary>
        </indexterm><indexterm>
          <primary>hire</primary>
        </indexterm><indexterm>
          <primary>programmer</primary>
        </indexterm><indexterm>
          <primary>solve</primary>
        </indexterm><indexterm>
          <primary>fix</primary>
        </indexterm><indexterm>
          <secondary>problem</secondary>
        </indexterm>
        Open Source software at least puts you in possession of the source code. This means that when
        all else fails, you can hire a programmer to solve the problem.
        </para>

        <sect2>
                <title>Technical Issues</title>

                <para>
                Each issue is now discussed and, where appropriate, example implementation steps are
                provided.
                </para>

        <variablelist>
                <varlistentry>
                        <term>Winbind and Security</term>
            <listitem><para><indexterm>
                  <primary>Winbind</primary>
                </indexterm><indexterm>
                  <primary>Security</primary>
                </indexterm><indexterm>
                  <primary>network</primary>
                  <secondary>administrators</secondary>
                </indexterm><indexterm>
                  <primary>Domain users</primary>
                </indexterm><indexterm>
                  <secondary>Domain account</secondary>
                </indexterm><indexterm>
                  <primary>credentials</primary>
                </indexterm><indexterm>
                  <primary>Network Neighborhood</primary>
                </indexterm><indexterm>
                  <primary>UNIX/Linux server</primary>
                </indexterm><indexterm>
                  <primary>browse</primary>
                </indexterm><indexterm>
                  <primary>shares</primary>
                </indexterm>
                                Windows network administrators may be dismayed to find that <command>winbind</command> 
                                exposes all domain users so that they may use their domain account credentials to 
                                log on to a UNIX/Linux system. The fact that all users in the domain can see the 
                                UNIX/Linux server in their Network Neighborhood and can browse the shares on the 
                                server seems to excite them further.
                                </para>

              <para><indexterm>
                  <primary>Domain Member server</primary>
                </indexterm><indexterm>
                  <primary>familiar</primary>
                </indexterm><indexterm>
                  <primary>fear</primary>
                </indexterm><indexterm>
                  <primary>unknown</primary>
                </indexterm>
                                <command>winbind</command> provides for the UNIX/Linux domain member server or 
                                client, the same as one would obtain by adding a Microsoft Windows server or 
                                client to the domain. The real objection is the fact that Samba is not MS Windows 
                                and therefore requires handling a little differently from the familiar Windows systems.
                                One must recognize fear of the unknown.
                                </para>

              <para><indexterm>
                  <primary>network administrators</primary>
                </indexterm><indexterm>
                  <primary>recognize</primary>
                </indexterm><indexterm>
                  <primary>winbind</primary>
                </indexterm><indexterm>
                  <primary>over-ride</primary>
                </indexterm><indexterm>
                  <primary>Active Directory</primary>
                  <secondary>management tools</secondary>
                </indexterm><indexterm>
                  <primary>fears</primary>
                </indexterm>
                                Windows network administrators need to recognize that <command>winbind</command> does
                                not, and cannot, override account controls set using the Active Directory management
                                tools. The control is the same. Have no fear.
                                </para>

              <para><indexterm>
                  <primary>ADS Domain</primary>
                </indexterm><indexterm>
                  <primary>account</primary>
                  <secondary>ADS Domain</secondary>
                </indexterm><indexterm>
                  <primary>winbind</primary>
                </indexterm><indexterm>
                  <primary>browsing</primary>
                </indexterm><indexterm>
                  <primary>permits</primary>
                </indexterm><indexterm>
                  <primary>access</primary>
                </indexterm><indexterm>
                  <primary>drive mapping</primary>
                </indexterm><indexterm>
                  <primary>protected</primary>
                </indexterm><indexterm>
                  <primary>security controls</primary>
                </indexterm><indexterm>
                  <primary>access controls</primary>
                </indexterm>
                                Where Samba and the ADS domain account information obtained through the use of
                                <command>winbind</command> permits access, by browsing or by the drive mapping to
                                a share, to data that should be better protected. This can only happen when security
                                controls have not been properly implemented. Samba permits access controls to be set
                                on:
                                </para>

                                <itemizedlist>
                                        <listitem><para>Shares themselves (i.e., the logical share itself)</para></listitem>
                                        <listitem><para>The share definition in &smb.conf;</para></listitem>
                                        <listitem><para>The shared directories and files using UNIX permissions</para></listitem>
                                        <listitem><para>Using Windows 2000 ACLs &smbmdash; if the file system is POSIX enabled</para></listitem>
                                </itemizedlist>

                                <para>
                                Examples of each are given in <link linkend="ch10expl"/>.
                                </para>
                                </listitem>
                </varlistentry>

                <varlistentry>
                        <term>User and Group Controls</term>
            <listitem><para><indexterm>
                  <primary>User and Group Controls</primary>
                </indexterm><indexterm>
                  <primary>management</primary>
                  <secondary>User</secondary>
                </indexterm><indexterm>
                  <primary>management</primary>
                  <secondary>group</secondary>
                </indexterm><indexterm>
                  <primary>ADS</primary>
                </indexterm><indexterm>
                  <primary>permissions</primary>
                </indexterm><indexterm>
                  <primary>privileges</primary>
                </indexterm><indexterm>
                  <primary>flexibility</primary>
                </indexterm><indexterm>
                  <primary>access controls</primary>
                </indexterm><indexterm>
                  <primary>share definition</primary>
                </indexterm>
                                User and group management facilities as known in the Windows ADS environment may be
                                used to provide equivalent access control constraints or to provide equivalent
                                permissions and privileges on Samba servers. Samba offers greater flexibility in the
                                use of user and group controls because it has additional layers of control compared to
                                Windows 200x/XP. For example, access controls on a Samba server may be set within
                                the share definition in a manner for which Windows has no equivalent.
                                </para>

              <para><indexterm>
                  <primary>analysis</primary>
                </indexterm><indexterm>
                  <primary>system security</primary>
                </indexterm><indexterm>
                  <primary>safe-guards</primary>
                </indexterm><indexterm>
                  <primary>permissions</primary>
                  <secondary>excessive</secondary>
                </indexterm><indexterm>
                  <primary>file system</primary>
                </indexterm><indexterm>
                  <primary>shared resource</primary>
                </indexterm><indexterm>
                  <primary>share definition</primary>
                </indexterm>
                                In any serious analysis of system security, it is important to examine the safeguards
                                that remain when all other protective measures fail. An administrator may inadvertently
                                set excessive permissions on the file system of a shared resource, or he may set excessive
                                privileges on the share itself. If that were to happen in a Windows 2003 Server environment,
                                the data would indeed be laid bare to abuse. Yet, within a Samba share definition, it is
                                possible to guard against that by enforcing controls on the share definition itself. You
                                see a practical example of this a little later in this chapter.
                                </para>

              <para><indexterm>
                  <primary>diligence</primary>
                </indexterm><indexterm>
                  <primary>weakness</primary>
                </indexterm>
                                The report that is critical of Samba really ought to have exercised greater due
                                diligence: the real weakness is on the side of a Microsoft Windows environment.
                                </para></listitem>
                </varlistentry>

                <varlistentry>
                        <term>Security Overall</term>
            <listitem><para><indexterm>
                  <primary>defects</primary>
                </indexterm>
                                Samba is designed in such a manner that weaknesses inherent in the design of
                                Microsoft Windows networking ought not to expose the underlying UNIX/Linux file
                                system in any way. All software has potential defects, and Samba is no exception.
                                What matters more is how defects that are discovered get dealt with.
                                </para>

              <para><indexterm>
                  <primary>security</primary>
                </indexterm><indexterm>
                  <primary>protection</primary>
                </indexterm><indexterm>
                  <primary>compromise</primary>
                </indexterm><indexterm>
                  <primary>consequential risk</primary>
                </indexterm>
                                The Samba Team totally agrees with the necessity to observe and fully implement
                                every security facility to provide a level of protection and security that is necessary
                                and that the end user (or network administrator) needs. Never would the Samba Team
                                recommend a compromise to system security, nor would deliberate defoliation of
                                security be publicly condoned; yet this is the practice by many Windows network
                                administrators just to make happy users who have no notion of consequential risk.
                                </para>

              <para><indexterm>
                  <primary>condemns</primary>
                </indexterm><indexterm>
                  <primary>security fixes</primary>
                </indexterm><indexterm>
                  <primary>updates</primary>
                </indexterm><indexterm>
                  <primary>development</primary>
                </indexterm><indexterm>
                  <primary>documentation</primary>
                </indexterm><indexterm>
                  <primary>security updates</primary>
                </indexterm><indexterm>
                  <primary>turn-around time</primary>
                </indexterm>
                                The report condemns Samba for releasing updates and security fixes, yet Microsoft
                                online updates need to be applied almost weekly. The answer to the criticism 
                                lies in the fact that Samba development is continuing, documentation is improving, 
                                user needs are being increasingly met or exceeded, and security updates are issued 
                                with a short turnaround time.
                                </para>

              <para><indexterm>
                  <primary>modularization</primary>
                </indexterm><indexterm>
                  <primary>next generation</primary>
                </indexterm><indexterm>
                  <primary>responsible</primary>
                </indexterm><indexterm>
                  <primary>dependability</primary>
                </indexterm><indexterm>
                  <primary>road-map</primary>
                  <secondary>published</secondary>
                </indexterm>
                                The release of Samba-4 is expected around late 2004 to early 2005 and involves a near 
                                complete rewrite to permit extensive modularization and to prepare Samba for new 
                                functionality planned for addition during the next-generation series. The Samba Team 
                                is responsible and can be depended upon; the history to date suggests a high 
                                degree of dependability and on charter development consistent with published 
                                roadmap projections.
                                </para>

              <para><indexterm>
                  <primary>foundation members</primary>
                </indexterm><indexterm>
                  <primary>Common Internet File System</primary>
                  <see>CIFS</see>
                </indexterm><indexterm>
                  <primary>network attached storage</primary>
                  <see>NAS</see>
                </indexterm><indexterm>
                  <primary>conferences</primary>
                </indexterm><indexterm>
                  <primary>presence and leadership</primary>
                </indexterm><indexterm>
                  <primary>leadership</primary>
                </indexterm><indexterm>
                  <primary>inter-operability</primary>
                </indexterm>
                                Not well published is the fact that Microsoft was a foundation member of
                                the Common Internet File System (CIFS) initiative, together with the participation 
                                of the network attached storage (NAS) industry. Unfortunately, for the past few years,
                                Microsoft has been absent from active involvement at CIFS conferences and has
                                not exercised the leadership expected of a major force in the networking technology
                                space. The Samba Team has maintained consistent presence and leadership at all
                                CIFS conferences and at the interoperability laboratories run concurrently with
                                them.
                                </para></listitem>
                </varlistentry>

                <varlistentry>
                        <term>Cryptographic Controls (schannel, sign'n'seal)</term>
            <listitem><para><indexterm>
                  <primary>Cryptographic</primary>
                </indexterm><indexterm>
                  <primary>schannel</primary>
                </indexterm><indexterm>
                  <primary>digital sign'n'seal</primary>
                </indexterm>
                                The report correctly mentions that Samba did not support the most recent
                                <constant>schannel</constant> and <constant>digital sign'n'seal</constant> features
                                of Microsoft Windows NT/200x/XPPro products. This is one of the key features 
                                of the Samba-3 release. Market research reports take so long to generate that they are
                                seldom a reflection of current practice, and in many respects reports are like a
                                pathology report &smbmdash; they reflect accurately (at best) status at a snapshot in time.
                                Meanwhile, the world moves on.
                                </para>

              <para><indexterm>
                  <primary>public specifications</primary>
                </indexterm><indexterm>
                  <primary>protocols</primary>
                </indexterm><indexterm>
                  <primary>algorithm</primary>
                </indexterm><indexterm>
                  <primary>compatible</primary>
                </indexterm><indexterm>
                  <primary>network</primary>
                  <secondary>traffic</secondary>
                  <tertiary>observation</tertiary>
                </indexterm><indexterm>
                  <primary>defensible standards</primary>
                </indexterm><indexterm>
                  <primary>secure networking</primary>
                </indexterm>
                                It should be pointed out that had clear public specifications for the protocols
                                been published, it would have been much easier to implement these features and would have
                                taken less time to do. The sole mechanism used to find an algorithm that is compatible
                                with the methods used by Microsoft has been based on observation of network traffic
                                and trial-and-error implementation of potential techniques. The real value of public
                                and defensible standards is obvious to all and would have enabled more secure networking
                                for everyone.
                                </para>

              <para><indexterm>
                  <primary>Critics</primary>
                </indexterm><indexterm>
                  <primary>digital sign'n'seal</primary>
                </indexterm>
                                Critics of Samba often ignore fundamental problems that may plague (or may have plagued)
                                the users of Microsoft's products also. Those who are first to criticize Samba
                                for not rushing into release of <constant>digital sign'n'seal</constant> support
                                often dismiss the problems that Microsoft has 
                                <ulink url="http://support.microsoft.com/default.aspx?kbid=321733">acknowledged</ulink>
                                and for which a fix was provided. In fact,
                                <ulink url="http://www.tangent-systems.com/support/delayedwrite.html">Tangent Systems</ulink> 
                                have documented a significant problem with delays writes that can be connected with the
                                implementation of sign'n'seal. They provide a work-around that is not trivial for many
                                Windows networking sites. From notes such as this it is clear that there are benefits
                                from not rushing new technology out of the door too soon.
                                </para>

              <para><indexterm>
                  <primary>secure networking protocols</primary>
                </indexterm><indexterm>
                  <primary>refereed standards</primary>
                </indexterm><indexterm>
                  <primary>proprietary</primary>
                </indexterm><indexterm>
                  <primary>digital rights</primary>
                </indexterm><indexterm>
                  <primary>protection</primary>
                </indexterm><indexterm>
                  <primary>networking protocols</primary>
                </indexterm><indexterm>
                  <primary>diffusion</primary>
                </indexterm><indexterm>
                  <primary>consumer</primary>
                </indexterm><indexterm>
                  <primary>choice</primary>
                </indexterm>
                                One final comment is warranted. If companies want more secure networking protocols,
                                the most effective method by which this can be achieved is by users seeking
                                and working together to help define open and publicly refereed standards. The
                                development of closed source, proprietary methods that are developed in a
                                clandestine framework of secrecy, under claims of digital rights protection, does
                                not favor the diffusion of safe networking protocols and certainly does not
                                help the consumer to make a better choice.
                                </para></listitem>
                </varlistentry>

                <varlistentry>
                        <term>Active Directory Replacement with Kerberos, LDAP, and Samba
                                        <indexterm>
                  <primary>Active Directory</primary>
                  <secondary>Replacement</secondary>
                </indexterm><indexterm>
                  <primary>Kerberos</primary>
                </indexterm><indexterm>
                  <primary>LDAP</primary>
                </indexterm><indexterm>
                  <primary>remote procedure call</primary>
                  <see>RPC</see>
                </indexterm>

                        </term>
                                <listitem><para>
                                <literallayout>    </literallayout>
                                The Microsoft networking protocols extensively make use of remote procedure call (RPC)
                                technology. Active Directory is not a simple mixture of LDAP and Kerberos together
                                with file and print services, but rather is a complex, intertwined implementation
                                of them that uses RPCs that are not supported by any of these component technologies
                                and yet by which they are made to interoperate in ways that the components do not
                                support.
                                </para>

              <para><indexterm>
                  <primary>Active Directory</primary>
                  <secondary>Server</secondary>
                </indexterm><indexterm>
                  <primary>OpenLDAP</primary>
                </indexterm><indexterm>
                  <primary>Kerberos</primary>
                </indexterm><indexterm>
                  <primary>project maintainers</primary>
                </indexterm><indexterm>
                  <primary>LDAP</primary>
                </indexterm>
                                In order to make the popular request for Samba to be an Active Directory Server a
                                reality, it is necessary to add to OpenLDAP, Kerberos, as well as Samba, RPC calls
                                that are not presently supported. The Samba Team has not been able to gain critical
                                overall support for all project maintainers to work together on the complex
                                challenge of developing and integrating the necessary technologies. Therefore, if
                                the Samba Team does not make it a priority to absorb Kerberos and LDAP functionality
                                into the Samba project, this dream request cannot become a reality.
                                </para>

              <para><indexterm>
                  <primary>missing RPC's</primary>
                </indexterm><indexterm>
                  <primary>road-map</primary>
                </indexterm><indexterm>
                  <primary>ADS</primary>
                  <secondary>server</secondary>
                </indexterm><indexterm>
                  <primary>MMC</primary>
                </indexterm><indexterm>
                  <primary>managed</primary>
                </indexterm>
                                At this time, the integration of LDAP, Kerberos, and the missing RPCs is not on the
                                Samba development roadmap. If it is not on the published roadmap, it cannot be delivered
                                anytime soon. Ergo, ADS server support is not a current goal for Samba development.
                                The Samba Team is most committed to permitting Samba to be a full ADS domain member
                                that is increasingly capable of being managed using Microsoft Windows MMC tools.
                                </para></listitem>
                </varlistentry>
        </variablelist>

        <sect3>
        <title>Kerberos Exposed</title>

          <para><indexterm>
              <primary>kerberos</primary>
            </indexterm><indexterm>
              <primary>unauthorized activities</primary>
            </indexterm><indexterm>
              <primary>authorized location</primary>
            </indexterm>
        Kerberos is a network authentication protocol that provides secure authentication for 
        client-server applications by using secret-key cryptography. Firewalls are an insufficient 
        barrier mechanism in today's networking world; at best they only restrict incoming network 
        traffic but cannot prevent network traffic that comes from authorized locations from 
        performing unauthorized activities.
        </para>

          <para><indexterm>
              <primary>strong cryptography</primary>
            </indexterm><indexterm>
              <primary>identity</primary>
            </indexterm><indexterm>
              <primary>integrity</primary>
            </indexterm>
        Kerberos was created by MIT as a solution to network security problems. The Kerberos protocol uses 
        strong cryptography so that a client can prove its identity to a server (and vice versa) across an 
        insecure network connection. After a client and server has used Kerberos to prove their identity, 
        they can also encrypt all of their communications to assure privacy and data integrity as they go 
        about their business.
        </para>

          <para><indexterm>
              <primary>trusted third-party</primary>
            </indexterm><indexterm>
              <primary>principals</primary>
            </indexterm><indexterm>
              <primary>trusting</primary>
            </indexterm><indexterm>
              <primary>kerberos</primary>
              <secondary>server</secondary>
            </indexterm><indexterm>
              <primary>secret</primary>
            </indexterm>
        Kerberos is a trusted third-party service. That means that there is a third party (the kerberos 
        server) that is trusted by all the entities on the network (users and services, usually called 
        principals). All principals share a secret password (or key) with the kerberos server and this 
        enables principals to verify that the messages from the kerberos server are authentic. Therefore, 
        trusting the kerberos server, users and services can authenticate each other.
        </para>

        <para>
        <indexterm><primary>restricted export</primary></indexterm>
        <indexterm><primary>MIT Kerberos</primary></indexterm>
        <indexterm><primary>Heimdal Kerberos</primary></indexterm>
        Kerberos was, until recently, a technology that was restricted from being exported from the United States.
        For many years that hindered global adoption of more secure networking technologies both within the United States
        and abroad. A free and unencumbered implementation of MIT Kerberos has been produced in Europe
        and is available from the <ulink url="http://www.pdc.kth.se/heimdal/">Royal Institute</ulink> of
        Technology (KTH), Sweden. It is known as the Heimdal Kerberos project.  In recent times the U.S. government
        has removed sanctions affecting the global distribution of MIT Kerberos.  It is likely that there will be a
        significant surge forward in the development of Kerberos-enabled applications and in the general deployment
        and use of Kerberos across the spectrum of the information technology industry.
        </para>

        <para>
        <indexterm><primary>Kerberos</primary><secondary>interoperability</secondary></indexterm>
        A storm has broken out concerning interoperability between MIT Kerberos and Microsofts' implementation
        of it. For example, a 2002
        <ulink url="http://www.idg.com.sg/idgwww.nsf/0/5DDA8D153A7505A748256BAB000D992A?OpenDocument">IDG</ulink>
        report<footnote><para>Note: This link is no longer active. The same article is still
                        available from <ulink url="http://199.105.191.226/Man/2699/020430msdoj/">ITWorld.com</ulink> (July 5, 2005)</para></footnote> by
        states:
        </para>

        <blockquote><para>
        A Microsoft Corp. executive testified at the software giant's remedy hearing that the company goes to 
        great lengths to disclose interfaces and protocols that allow third-party software products to interact 
        with Windows. But a lawyer with the states suing Microsoft pointed out that when it comes to the company's 
        use of the Kerberos authentication specification, not everyone agrees.
        </para>

        <para>
        <indexterm><primary>Kerberos</primary><secondary>unspecified fields</secondary></indexterm>
        Robert Short, vice president of Windows core technology at Microsoft, wrote in his direct testimony prepared 
        before his appearance that non-Microsoft operating systems can disregard the portion of the Kerberos version 
        5 specification that Windows clients use for proprietary purposes and still achieve interoperability with 
        the Microsoft OS. Microsoft takes advantage of unspecified fields in the Kerberos specification for storing 
        Windows-specific authorization data, Short wrote. The designers of Kerberos left these fields undefined so 
        that software developers could add their own authorization information, he said.
        </para></blockquote>

        <para>
        <indexterm><primary>DCE</primary></indexterm>
        <indexterm><primary>RPC</primary></indexterm>
        It so happens that Microsoft Windows clients depend on and expect the contents of the <emphasis>unspecified
        fields</emphasis> in the Kerberos 5 communications data stream for their Windows interoperability,
        particularly when Samba is expected to emulate a Windows Server 200x domain controller. But the interoperability
        issue goes far deeper than this. In the domain control protocols that are used by MS Windows XP Professional,
        there is a tight interdependency between the Kerberos protocols and the Microsoft distributed computing environment
        (DCE) RPCs that themselves are an integral part of the SMB/CIFS protocols as used by
        Microsoft.
        </para>

        <para>
        Microsoft makes the following comment in a reference in a
        <ulink url="http://www.microsoft.com/technet/itsolutions/interop/mgmt/kerberos.asp">
        technet</ulink> article:
        </para>

          <blockquote><para><indexterm>
                <primary>Privilege Attribute Certificates</primary>
                <see>PAC</see>
              </indexterm><indexterm>
                <primary>access control</primary>
              </indexterm>
        The DCE Security Services are also layered on the Kerberos protocol. DCE authentication services use RPC 
        representation of Kerberos protocol messages. In addition, DCE uses the authorization data field in Kerberos 
        tickets to convey Privilege Attribute Certificates (PACs) that define user identity and group membership. 
        The DCE PAC is used in a similar manner as Windows NT Security IDs for user authorization and access control. 
        Windows NT services will not be able to translate DCE PACs into Windows NT user and group identifiers. This 
        is not an issue with Kerberos interoperability, but rather an issue of interoperability between DCE and 
        Windows NT access control information.
        </para></blockquote>

        </sect3>

        </sect2>

</sect1>

<sect1 id="ch10expl">
        <title>Implementation</title>

        <para>
        The following procedures outline the implementation of the security measures discussed so far.
        </para>

        <sect2>
        <title>Share Access Controls</title>

        <para><indexterm>
            <primary>Share Access Controls</primary>
          </indexterm><indexterm>
            <primary>filter</primary>
          </indexterm><indexterm>
            <primary>connection</primary>
          </indexterm>
        Access control entries placed on the share itself act as a filter at the time a when CIFS/SMB client (such as
        Windows XP Pro) attempts to make a connection to the Samba server.
        </para>

        <procedure>
        <title>Create/Edit/Delete Share ACLs</title>
          <step><para><indexterm>
                <primary>Domain Administrator</primary>
              </indexterm><indexterm>
                <primary>account</primary>
              </indexterm>
                From a Windows 200x/XP Professional workstation, log on to the domain using the Domain Administrator 
                account (on Samba domains, this is usually the account called <constant>root</constant>).
                </para></step>

                <step><para>
                Click 
                <menuchoice>
                        <guimenu>Start</guimenu>
                        <guimenuitem>Settings</guimenuitem>
                        <guimenuitem>Control Panel</guimenuitem>
                        <guimenuitem>Administrative Tools</guimenuitem>
                        <guimenuitem>Computer Management</guimenuitem>
                </menuchoice>.
                </para></step>

                <step><para>
                In the left panel,
                <menuchoice>
                        <guimenu>[Right mouse menu item] Computer Management (Local)</guimenu>
                        <guimenuitem>Connect to another computer ...</guimenuitem>
                        <guimenuitem>Browse...</guimenuitem>
                        <guimenuitem>Advanced</guimenuitem>
                        <guimenuitem>Find Now</guimenuitem>
                </menuchoice>. In the lower panel, click on the name of the server you wish to
                administer. Click <menuchoice>
                                <guimenu>OK</guimenu>
                                <guimenuitem>OK</guimenuitem>
                                <guimenuitem>OK</guimenuitem>
              </menuchoice>.<indexterm>
                <primary>Computer Management</primary>
              </indexterm>
                In the left panel, the entry <guimenu>Computer Management (Local)</guimenu> should now reflect
                the change made. For example, if the server you are administering is called <constant>FRODO</constant>,
                the Computer Management entry should now say <guimenu>Computer Management (FRODO)</guimenu>.
                </para></step>

                <step><para>
                In the left panel, click <menuchoice>
                        <guimenu>Computer Management (FRODO)</guimenu>
                        <guimenuitem>[+] Shared Folders</guimenuitem>
                        <guimenuitem>Shares</guimenuitem>
                </menuchoice>.
                </para></step>

          <step><para><indexterm>
                <primary>ACLs</primary>
              </indexterm><indexterm>
                <primary>Share Permissions</primary>
              </indexterm>
                In the right panel, double-click on the share on which you wish to set/edit ACLs. This
                will bring up the Properties panel. Click the <guimenu>Share Permissions</guimenu> tab.
                </para></step>

          <step><para><indexterm>
                <primary>access control settings</primary>
              </indexterm><indexterm>
                <primary>Everyone</primary>
              </indexterm><indexterm>
                <primary>full control</primary>
              </indexterm><indexterm>
                <primary>over-rule</primary>
              </indexterm><indexterm>
                <primary>permissions</primary>
              </indexterm><indexterm>
                <primary>rejected</primary>
              </indexterm>
                You may now edit/add/remove access control settings. Be very careful. Many problems have been
                created by people who decided that everyone should be rejected but one particular group should
                have full control. This is a catch-22 situation because members of that particular group also
                belong to the group <constant>Everyone</constant>, which therefore overrules any permissions
                set for the permitted group.
                </para></step>

                <step><para>
                When you are done with editing, close all panels by clicking through the <guimenu>OK</guimenu>
                buttons.
                </para></step>
        </procedure>

        </sect2>

        <sect2>
        <title>Share Definition Controls</title>

        <para><indexterm>
            <primary>Share Definition</primary>
            <secondary>Controls</secondary>
          </indexterm><indexterm>
            <primary>check-point</primary>
          </indexterm><indexterm>
            <primary>pile-driver</primary>
          </indexterm><indexterm>
            <primary>credential</primary>
          </indexterm><indexterm>
            <primary>powers</primary>
          </indexterm><indexterm>
            <primary>privileges</primary>
          </indexterm>
        Share-definition-based access controls can be used like a checkpoint or like a pile-driver. Just as a
        checkpoint can be used to require someone who wants to get through to meet certain requirements, so
        it is possible to require the user (or group the user belongs to) to meet specified credential-related 
        objectives. It can be likened to a pile-driver by overriding default controls in that having met the 
        credential-related objectives, the user can be granted powers and privileges that would not normally be 
        available under default settings.
        </para>

        <para><indexterm>
            <primary>access controls</primary>
          </indexterm><indexterm>
            <primary>ACLs</primary>
          </indexterm><indexterm>
            <primary>share definition controls</primary>
          </indexterm><indexterm>
            <primary>hierarchy of control</primary>
          </indexterm>
        It must be emphasized that the controls discussed here can act as a filter or give rights of passage
        that act as a superstructure over normal directory and file access controls. However, share-level
        ACLs act at a higher level than do share definition controls because the user must filter through the
        share-level controls to get to the share-definition controls. The proper hierarchy of controls implemented
        by Samba and Windows networking consists of:
        </para>

        <orderedlist>
                <listitem><para>Share-level ACLs</para></listitem>
                <listitem><para>Share-definition controls</para></listitem>
                <listitem><para>Directory and file permissions</para></listitem>
                <listitem><para>Directory and file POSIX ACLs</para></listitem>
        </orderedlist>

        <sect3>
        <title>Checkpoint Controls</title>

          <para><indexterm>
              <primary>Checkpoint Controls</primary>
            </indexterm>
        Consider the following extract from a &smb.conf; file defining the share called <constant>Apps</constant>:
<screen>
[Apps]
        comment = Application Share
        path = /data/apps
        read only = Yes
        valid users = @Employees
</screen>
        This definition permits only those who are members of the group called <constant>Employees</constant> to 
        access the share.
        </para>

          <note><para><indexterm>
                <primary>Domain Member</primary>
                <secondary>servers</secondary>
              </indexterm><indexterm>
                <primary>winbind use default domain</primary>
              </indexterm><indexterm>
                <primary>fully qualified</primary>
              </indexterm><indexterm>
                <primary>valid users</primary>
              </indexterm><indexterm>
                <primary>delimiter</primary>
              </indexterm>
        On domain member servers and clients, even when the <parameter>winbind use default domain</parameter> has
        been specified, the use of domain accounts in security controls requires fully qualified domain specification,
        for example, <smbconfoption name="valid users">@"MEGANET\Northern Engineers"</smbconfoption>. 
        Note the necessity to use the double quotes to avoid having the space in the Windows group name interpreted as a
        delimiter. 
        </para></note>

          <para><indexterm>
              <primary>ACL</primary>
            </indexterm><indexterm>
              <primary>access</primary>
            </indexterm><indexterm>
              <primary>validate</primary>
            </indexterm>
        If there is an ACL on the share itself to permit read/write access for all <constant>Employees</constant>
        as well as read/write for the group <constant>Doctors</constant>, both groups are permitted through
        to the share. However, at the moment an attempt is made to set up a connection to the share, a member of
        the group <constant>Doctors</constant>, who is not also a member of the group <constant>Employees</constant>,
        would immediately fail to validate.
        </para>

          <para><indexterm>
              <primary>share definition controls</primary>
            </indexterm>
        Consider another example. In this case, you want to permit all members of the group <constant>Employees</constant>
        except the user <constant>patrickj</constant> to access the <constant>Apps</constant> share. This can be
        easily achieved by setting a share-level ACL permitting only <constant>Employees</constant> to access the share,
        and then in the share definition controls excluding just <constant>patrickj</constant>. Here is how that might
        be done:
<screen>
[Apps]
        comment = Application Share
        path = /data/apps
        read only = Yes
        invalid users = patrickj
</screen>
            <indexterm>
              <primary>permissions</primary>
            </indexterm>
        Let us assume that you want to permit the user <constant>gbshaw</constant> to manage any file in the
        UNIX/Linux file system directory <filename>/data/apps</filename>, but you do not want to grant any write
        permissions beyond that directory tree. Here is one way this can be done:
<screen>
[Apps]
        comment = Application Share
        path = /data/apps
        read only = Yes
        invalid users = patrickj
        admin users = gbshaw
</screen>
            <indexterm>
              <primary>administrative rights</primary>
            </indexterm>
        Now we have a set of controls that permits only <constant>Employees</constant> who are also members of
        the group <constant>Doctors</constant>, excluding the user <constant>patrickj</constant>, to have 
        read-only privilege, but the user <constant>gbshaw</constant> is granted administrative rights.
        The administrative rights conferred upon the user <constant>gbshaw</constant> permit operation as
        if that user has logged in as the user <constant>root</constant> on the UNIX/Linux system and thus,
        for access to the directory tree that has been shared (exported), permit the user to override controls
        that apply to all other users on that resource.
        </para>

        <para>
        There are additional checkpoint controls that may be used. For example, if for the same share we now
        want to provide the user <constant>peters</constant> with the ability to write to one directory to
        which he has write privilege in the UNIX file system, you can specifically permit that with the
        following settings:
<screen>
[Apps]
        comment = Application Share
        path = /data/apps
        read only = Yes
        invalid users = patrickj
        admin users = gbshaw
        write list = peters
</screen>
            <indexterm>
              <primary>check-point controls</primary>
            </indexterm>
        This is a particularly complex example at this point, but it begins to demonstrate the possibilities.
        You should refer to the online manual page for the &smb.conf; file for more information regarding
        the checkpoint controls that Samba implements.
        </para>

        </sect3>

        <sect3>
        <title>Override Controls</title>

          <para><indexterm>
              <primary>over-ride controls</primary>
            </indexterm>
        Override controls implemented by Samba permit actions like the adoption of a different identity 
        during file system operations, the forced overwriting of normal file and directory permissions,
        and so on. You should refer to the online manual page for the &smb.conf; file for more information regarding
        the override controls that Samba implements.
        </para>

        <para>
        In the following example, you want to create a Windows networking share that any user can access.
        However, you want all read and write operations to be performed as if the user <constant>billc</constant>
        and member of the group <constant>Mentors</constant> read/write the files. Here is one way this
        can be done:
<screen>
[someshare]
        comment = Some Files Everyone May Overwrite
        path = /data/somestuff
        read only = No
        force user = billc
        force group = Mentors
</screen>
            <indexterm>
              <primary>forced settings</primary>
            </indexterm><indexterm>
              <primary>overheads</primary>
            </indexterm>
        That is all there is to it. Well, it is almost that simple. The downside of this method is that
        users are logged onto the Windows client as themselves, and then immediately before accessing the
        file, Samba makes system calls to change the effective user and group to the forced settings
        specified, completes the file transaction, and then reverts to the actually logged-on identity.
        This imposes significant overhead on Samba. The alternative way to effectively achieve the same result
        (but with lower system CPU overheads) is described next.
        </para>

          <para><indexterm>
              <primary>force user</primary>
            </indexterm><indexterm>
              <primary>force group</primary>
            </indexterm><indexterm>
              <primary>opportunistic</primary>
              <secondary>locking</secondary>
            </indexterm><indexterm>
              <primary>oplock break</primary>
            </indexterm><indexterm>
              <primary>performance degradation</primary>
            </indexterm>
        The use of the <parameter>force user</parameter> or the <parameter>force group</parameter> may
        also have a severe impact on system (particularly on Windows client) performance. If opportunistic
        locking is enabled on the share (the default), it causes an <constant>oplock break</constant> to be
        sent to the client even if the client has not opened the file. On networks that have high traffic
        density, or on links that are routed to a remote network segment, <constant>oplock breaks</constant>
        can be lost. This results in possible retransmission of the request, or the client may time-out while
        waiting for the file system transaction (read or write) to complete. The result can be a profound
        apparent performance degradation as the client continually attempts to reconnect to overcome the
        effect of the lost <constant>oplock break</constant>, or time-out.
        </para>
        
        </sect3>

        </sect2>

        <sect2>
        <title>Share Point Directory and File Permissions</title>

        <para><indexterm>
            <primary>security</primary>
          </indexterm><indexterm>
            <primary>privilege controls</primary>
          </indexterm><indexterm>
            <primary>permission</primary>
          </indexterm><indexterm>
            <primary>share definition controls</primary>
          </indexterm>
        Samba has been designed and implemented so that it respects as far as is feasible the security and
        user privilege controls that are built into the UNIX/Linux operating system. Samba does nothing
        with respect to file system access that violates file system permission settings, unless it is
        explicitly instructed to do otherwise through share definition controls. Given that Samba obeys
        UNIX file system controls, this chapter does not document simple information that can be obtained
        from a basic UNIX training guide. Instead, one common example of a typical problem is used
        to demonstrate the most effective solution referred to in the immediately preceding paragraph.
        </para>

        <para><indexterm>
            <primary>Microsoft Office</primary>
          </indexterm><indexterm>
            <primary>Word</primary>
          </indexterm><indexterm>
            <primary>Excel</primary>
          </indexterm>
        One of the common issues that repeatedly pops up on the Samba mailing lists involves the saving of
        Microsoft Office files (Word and Excel) to a network drive. Here is the typical sequence:
        </para>

        <orderedlist>
                <listitem><para>
                A user opens a Word document from a network drive. The file was owned by user <constant>janetp</constant>
                and <constant>users</constant>, and was set read/write-enabled for everyone.
                </para></listitem>

                <listitem><para>
                File changes and edits are made.
                </para></listitem>

                <listitem><para>
                The file is saved, and MS Word is closed.
                </para></listitem>

                <listitem><para>
                The file is now owned by the user <constant>billc</constant> and group <constant>doctors</constant>,
                and is set read/write by <constant>billc</constant>, read-only by <constant>doctors</constant>, and
                no access by everyone.
                </para></listitem>

                <listitem><para>
                The original owner cannot now access her own file and is <quote>justifiably</quote> upset.
                </para></listitem>
        </orderedlist>

        <para>
        There have been many postings over the years that report the same basic problem. Frequently Samba users
        want to know when this <quote>bug</quote> will be fixed. The fact is, this is not a bug in Samba at all.
        Here is the real sequence of what happens in this case.
        </para>

        <para><indexterm>
            <primary>MS Word</primary>
          </indexterm><indexterm>
            <primary>ownership</primary>
          </indexterm><indexterm>
            <primary>permissions</primary>
          </indexterm>
        When the user saves a file, MS Word creates a new (temporary) file. This file is naturally owned
        by the user who creates the file (<constant>billc</constant>) and has the permissions that follow
        that user's default settings within the operating system (UNIX/Linux). When MS Word has finished writing
        the file to disk, it then renames the new (temporary) file to the name of the old one. MS Word does not
        change the ownership or permissions to what they were on the original file. The file is thus a totally
        new file, and the old one has been deleted in the process.
        </para>

        <para>
        Samba received a request to create a new file, and then to rename the file to a new name. The old file that
        has the same name is now automatically deleted. Samba has no way of knowing that the new file should
        perhaps have the same ownership and permissions as the old file. To Samba, these are entirely independent
        operations.
        </para>

        <para>
        The question is, <quote>How can we solve the problem?</quote>
        </para>

        <para>
        The solution is simple. Use UNIX file system permissions and controls to your advantage. Follow these
        simple steps to create a share in which all files will consistently be owned by the same user and the
        same group:
        </para>


        <procedure>
        <title>Using Directory Permissions to Force File User and Group Ownership</title>
                <step><para>
                Change your share definition so that it matches this pattern:
<screen>
[finance]
        path = /usr/data/finance
        browseable = Yes
        read only = No
</screen>
                </para></step>

          <step><para><indexterm>
                <primary>permissions</primary>
                <secondary>user</secondary>
              </indexterm><indexterm>
                <primary>permissions</primary>
                <secondary>group</secondary>
              </indexterm>
                Set consistent user and group permissions recursively down the directory tree as shown here:
<screen>
&rootprompt; chown -R janetp.users /usr/data/finance
</screen>
                </para></step>

          <step><para><indexterm>
                <primary>accessible</primary>
              </indexterm>
                Set the files and directory permissions to be read/write for owner and group, and not accessible
                to others (everyone), using the following command:
<screen>
&rootprompt; chmod ug+rwx,o-rwx /usr/data/finance
</screen>
                </para></step>

          <step><para><indexterm>
                <primary>SGID</primary>
              </indexterm>
                Set the SGID (supergroup) bit on all directories from the top down. This means all files 
                can be created with the permissions of the group set on the directory. It means all users 
                who are members of the group <constant>finance</constant> can read and write all files in 
                the directory. The directory is not readable or writable by anyone who is not in the 
                <constant>finance</constant> group. Simply follow this example:
<screen>
&rootprompt; find /usr/data/finance -type d -exec chmod ug+s {}\;
</screen>

                </para></step>

          <step><para><indexterm>
                <primary>group membership</primary>
              </indexterm><indexterm>
                <primary>primary group</primary>
              </indexterm><indexterm>
                <primary>/etc/passwd</primary>
              </indexterm>
                Make sure all users that must have read/write access to the directory have 
                <constant>finance</constant> group membership as their primary group, 
                for example, the group they belong to in <filename>/etc/passwd</filename>.
                </para></step>
        </procedure>

        </sect2>

        <sect2>
        <title>Managing Windows 200x ACLs</title>

        <para><indexterm>
            <primary>translate</primary>
          </indexterm><indexterm>
            <primary>Windows 2000 ACLs</primary>
          </indexterm><indexterm>
            <primary>Posix ACLs</primary>
          </indexterm><indexterm>
            <primary>side effects</primary>
          </indexterm>
        Samba must translate Windows 2000 ACLs to UNIX POSIX ACLs. This has some interesting side effects because
        there is not a one-to-one equivalence between them. The as-close-as-possible ACLs match means
        that some transactions are not possible from MS Windows clients. One of these is to reset the ownership
        of directories and files. If you want to reset ownership, this must be done from a UNIX/Linux login.
        </para>

        <para>
        There are two possible ways to set ACLs on UNIX/Linux file systems from a Windows network workstation,
        either via File Manager or via the Microsoft Management Console (MMC) Computer Management interface.
        </para>

        <sect3>
        <title>Using the MMC Computer Management Interface</title>

        <procedure>
                <step><para>
                From a Windows 200x/XP Professional workstation, log on to the domain using the Domain Administrator 
                account (on Samba domains, this is usually the account called <constant>root</constant>).
                </para></step>

                <step><para>
                Click 
                <menuchoice>
                        <guimenu>Start</guimenu>
                        <guimenuitem>Settings</guimenuitem>
                        <guimenuitem>Control Panel</guimenuitem>
                        <guimenuitem>Administrative Tools</guimenuitem>
                        <guimenuitem>Computer Management</guimenuitem>
                </menuchoice>.
                </para></step>

                <step><para>
                In the left panel,
                <menuchoice>
                        <guimenu>[Right mouse menu item] Computer Management (Local)</guimenu>
                        <guimenuitem>Connect to another computer ...</guimenuitem>
                        <guimenuitem>Browse...</guimenuitem>
                        <guimenuitem>Advanced</guimenuitem>
                        <guimenuitem>Find Now</guimenuitem>
                </menuchoice>. In the lower panel, click on the name of the server you wish to
                administer. Click <menuchoice>
                                <guimenu>OK</guimenu>
                                <guimenuitem>OK</guimenuitem>
                                <guimenuitem>OK</guimenuitem>
                </menuchoice>.
                In the left panel, the entry <guimenu>Computer Management (Local)</guimenu> should now reflect
                the change made. For example, if the server you are administering is called <constant>FRODO</constant>,
                the Computer Management entry should now say: <guimenu>Computer Management (FRODO)</guimenu>.
                </para></step>

                <step><para>
                In the left panel, click <menuchoice>
                        <guimenu>Computer Management (FRODO)</guimenu>
                        <guimenuitem>[+] Shared Folders</guimenuitem>
                        <guimenuitem>Shares</guimenuitem>
                </menuchoice>.
                </para></step>

            <step><para><indexterm>
                  <primary>Security</primary>
                </indexterm><indexterm>
                  <primary>Properties</primary>
                </indexterm><indexterm>
                  <primary>Permissions</primary>
                </indexterm><indexterm>
                  <primary>Samba Domain server</primary>
                </indexterm>
                In the right panel, double-click on the share on which you wish to set/edit ACLs. This
                brings up the Properties panel. Click the <guimenu>Security</guimenu> tab. It is best
                to edit ACLs using the <constant>Advanced</constant> editing features. Click the 
                <guimenu>Advanced</guimenu> button. This opens a panel that has four tabs. Only the 
                functionality under the <constant>Permissions</constant> tab can be utilized with respect 
                to a Samba domain server.
                </para></step>

            <step><para><indexterm>
                  <primary>access control</primary>
                </indexterm><indexterm>
                  <primary>permitted group</primary>
                </indexterm>
                You may now edit/add/remove access control settings. Be very careful. Many problems have been
                created by people who decided that everyone should be rejected but one particular group should
                have full control. This is a catch-22 situation because members of that particular group also
                belong to the group <constant>Everyone</constant>, which therefore overrules any permissions
                set for the permitted group.
                </para></step>

                <step><para>
                When you are done with editing, close all panels by clicking through the <guimenu>OK</guimenu>
                buttons until the last panel closes.
                </para></step>
        </procedure>
        
        </sect3>

        <sect3>
        <title>Using MS Windows Explorer (File Manager)</title>

        <para>
        The following alternative method may be used from a Windows workstation. In this example we work
        with a domain called <constant>MEGANET</constant>, a server called <constant>MASSIVE</constant>, and a
        share called <constant>Apps</constant>. The underlying UNIX/Linux share point for this share is
        <filename>/data/apps</filename>.
        </para>

        <procedure>
                <step><para>
                Click <menuchoice>
                        <guimenu>Start</guimenu>
                        <guimenuitem>[right-click] My Computer</guimenuitem>
                        <guimenuitem>Explore</guimenuitem>
                        <guimenuitem>[left panel] [+] My Network Places</guimenuitem>
                        <guimenuitem>[+] Entire Network</guimenuitem>
                        <guimenuitem>[+] Microsoft Windows Network</guimenuitem>
                        <guimenuitem>[+] Meganet</guimenuitem>
                        <guimenuitem>[+] Massive</guimenuitem>
                        <guimenuitem>[right-click] Apps</guimenuitem>
                        <guimenuitem>Properties</guimenuitem>
                        <guimenuitem>Security</guimenuitem>
                        <guimenuitem>Advanced</guimenuitem>
                </menuchoice>. This opens a panel that has four tabs. Only the functionality under the 
                <constant>Permissions</constant> tab can be utilized for a Samba domain server.
                </para></step>

            <step><para><indexterm>
                  <primary>full control</primary>
                </indexterm><indexterm>
                  <primary>over-rule</primary>
                </indexterm>
                You may now edit/add/remove access control settings. Be very careful. Many problems have been
                created by people who decided that everyone should be rejected but one particular group should
                have full control. This is a catch-22 situation because members of that particular group also
                belong to the group <constant>Everyone</constant>, which therefore overrules any permissions
                set for the permitted group.
                </para></step>

                <step><para>
                When you are done with editing, close all panels by clicking through the <guimenu>OK</guimenu>
                buttons until the last panel closes.
                </para></step>
        </procedure>

        </sect3>

        <sect3>
        <title>Setting Posix ACLs in UNIX/Linux</title>

          <para><indexterm>
              <primary>desired security setting</primary>
            </indexterm><indexterm>
              <primary>shared resource</primary>
            </indexterm>
        Yet another alternative method for setting desired security settings on the shared resource files and
        directories can be achieved by logging into UNIX/Linux and setting POSIX ACLs directly using command-line
        tools. Here is an example session on the same resource as in the immediately preceding example on a SUSE 9
        Linux system:
        </para>

        <procedure>
                <step><para>
                Log into the Linux system as the user <constant>root</constant>.
                </para></step>

                <step><para>
                Change directory to the location of the exported (shared) Windows file share (Apps), which is in
                the directory <filename>/data</filename>. Execute the following:
<screen>
&rootprompt; cd /data
</screen>
                Retrieve the existing POSIX ACLs entry by executing:
<screen>
&rootprompt; getfacl apps
# file: apps
# owner: root
# group: root
user::rwx
group::rwx
other::r-x
</screen>
                </para></step>

            <step><para><indexterm>
                  <primary>recursively</primary>
                </indexterm>
                You want to add permission for <constant>AppsMgrs</constant> to enable them to
                manage the applications (apps) share. It is important to set the ACL recursively
                so that the AppsMgrs have this capability throughout the directory tree that is 
                being shared. This is done using the <constant>-R</constant> option as shown.
                Execute the following:
<screen>
&rootprompt; setfacl -m -R group:AppsMgrs:rwx /data/apps
</screen>
                Because setting an ACL does not provide a response, you immediately validate the command executed
                as follows:
<screen>
&rootprompt; getfacl /data/apps
# file: apps
# owner: root
# group: root
user::rwx
group::rwx
group:AppsMgrs:rwx
mask::rwx
other::r-x
</screen>
                This confirms that the change of POSIX ACL permissions has been effective.
                </para></step>

            <step><para><indexterm>
                  <primary>setfacl</primary>
                </indexterm><indexterm>
                  <primary>getfacl</primary>
                </indexterm><indexterm>
                  <primary>directory tree</primary>
                </indexterm><indexterm>
                  <primary>Windows ACLs</primary>
                </indexterm><indexterm>
                  <primary>inheritance</primary>
                </indexterm>
                It is highly recommended that you read the online manual page for the <command>setfacl</command>
                and <command>getfacl</command> commands. This provides information regarding how to set/read the default
                ACLs and how that may be propagated through the directory tree. In Windows ACLs terms, this is the equivalent
                of setting <constant>inheritance</constant> properties.
                </para></step>
        </procedure>

        </sect3>

        </sect2>

        <sect2>
                <title>Key Points Learned</title>

                <para>
                The mish-mash of issues were thrown together into one chapter because it seemed like a good idea.
                Looking back, this chapter could be broken into two, but it's too late now. It has been done.
                The highlights covered are as follows:
                </para>

                <itemizedlist>
          <listitem><para><indexterm>
                <primary>Winbind</primary>
              </indexterm><indexterm>
                <primary>Active Directory</primary>
              </indexterm><indexterm>
                <primary>password change</primary>
              </indexterm><indexterm>
                <primary>logon hours</primary>
              </indexterm>
                        Winbind honors and does not override account controls set in Active Directory.
                        This means that password change, logon hours, and so on, are (or soon will be) enforced
                        by Samba winbind. At this time, an out-of-hours login is denied and password
                        change is enforced. At this time, if logon hours expire, the user is not forcibly
                        logged off. That may be implemented at some later date.
                        </para></listitem>

          <listitem><para><indexterm>
                <primary>Sign'n'seal</primary>
              </indexterm><indexterm>
                <primary>schannel</primary>
              </indexterm>
                        Sign'n'seal (plus schannel support) has been implemented in Samba-3. Beware of potential
                        problems acknowledged by Microsoft as having been fixed but reported by some as still
                        possibly an open issue.
                        </para></listitem>

          <listitem><para><indexterm>
                <primary>Kerberos</primary>
              </indexterm><indexterm>
                <primary>OpenLDAP</primary>
              </indexterm><indexterm>
                <primary>Active Directory</primary>
              </indexterm><indexterm>
                <primary>inter-operability</primary>
              </indexterm>
                        The combination of Kerberos 5, plus OpenLDAP, plus Samba, cannot replace Microsoft
                        Active Directory. The possibility to do this is not planned in the current Samba-3
                        roadmap. Samba-3 does aim to provide further improvements in interoperability so that
                        UNIX/Linux systems may be fully integrated into Active Directory domains.
                        </para></listitem>

                        <listitem><para>
                        This chapter reviewed mechanisms by which Samba servers may be kept secure. Each of
                        the four key methodologies was reviewed with specific reference to example deployment
                        techniques.
                        </para></listitem>
                </itemizedlist>

        </sect2>

</sect1>

<sect1>
        <title>Questions and Answers</title>

        <para>
        </para>

        <qandaset defaultlabel="chap10qa" type="number">
        <qandaentry>
        <question>

            <para><indexterm>
                <primary>Sign'n'seal</primary>
              </indexterm><indexterm>
                <primary>registry hacks</primary>
              </indexterm>
                Does Samba-3 require the <constant>Sign'n'seal</constant> registry hacks needed by Samba-2?
                </para>

        </question>
        <answer>

            <para><indexterm>
                <primary>schannel</primary>
              </indexterm><indexterm>
                <primary>Sign'n'seal</primary>
              </indexterm><indexterm>
                <primary>registry change</primary>
              </indexterm>
                No. Samba-3 fully supports <constant>Sign'n'seal</constant> as well as <constant>schannel</constant>
                operation. The registry change should not be applied when Samba-3 is used as a domain controller.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                Does Samba-3 support Active Directory?
                </para>

        </question>
        <answer>

            <para><indexterm>
                <primary>Active Directory</primary>
              </indexterm>
                Yes. Samba-3 can be a fully participating native mode Active Directory client. Samba-3 does not
                provide Active Directory services. It cannot be used to replace a Microsoft Active Directory
                server implementation. Samba-3 can function as an Active Directory client (workstation) toolkit,
                and it can function as an Active Directory domain member server.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

            <para><indexterm>
                <primary>mixed-mode</primary>
              </indexterm>
                When Samba-3 is used with Active Directory, is it necessary to run mixed-mode operation, as was
                necessary with Samba-2?
                </para>

        </question>
        <answer>

            <para><indexterm>
                <primary>native</primary>
              </indexterm>
                No. Samba-3 can be used with NetBIOS over TCP/IP disabled, just as can be done with Windows 200x
                Server and 200x/XPPro client products. It is no longer necessary to run mixed-mode operation,
                because Samba-3 can join a native Windows 2003 Server ADS domain.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

            <para><indexterm>
                <primary>share level access controls</primary>
              </indexterm>
                Is it safe to set share-level access controls in Samba?
                </para>

        </question>
        <answer>

                <para>
                Yes. Share-level access controls have been supported since early versions of Samba-2. This is
                very mature technology. Not enough sites make use of this powerful capability, neither on
                Windows server or with Samba servers.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

            <para><indexterm>
                <primary>share ACLs</primary>
              </indexterm>
                Is it mandatory to set share ACLs to get a secure Samba-3 server?
                </para>

        </question>
        <answer>

            <para><indexterm>
                <primary>file system security</primary>
              </indexterm><indexterm>
                <primary>Windows 200x ACLs</primary>
              </indexterm><indexterm>
                <primary>share definition controls</primary>
              </indexterm><indexterm>
                <primary>share level ACL</primary>
              </indexterm><indexterm>
                <primary>security</primary>
              </indexterm>
                No. Samba-3 honors UNIX/Linux file system security, supports Windows 200x ACLs, and provides 
                means of securing shares through share definition controls in the &smb.conf; file. The additional
                support for share-level ACLs is like frosting on the cake. It adds to security but is not essential
                to it.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

            <para><indexterm>
                <primary>valid users</primary>
              </indexterm>
                The <parameter>valid users</parameter> did not work on the <smbconfsection name="[homes]"/>.
                Has this functionality been restored yet?
                </para>

        </question>
        <answer>

            <para><indexterm>
                <primary>meta-service</primary>
              </indexterm>
                Yes. This was fixed in Samba-3.0.2. The use of this parameter is strongly recommended as a safeguard
                on the <smbconfsection name="[homes]"/> meta-service. The correct way to specify this is:
                <smbconfoption name="valid users">%S</smbconfoption>.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

            <para><indexterm>
                <primary>force user</primary>
              </indexterm><indexterm>
                <primary>force group</primary>
              </indexterm><indexterm>
                <primary>bias</primary>
              </indexterm>
                Is the bias against use of the <parameter>force user</parameter> and <parameter>force group</parameter>
                really warranted?
                </para>

        </question>
        <answer>

            <para><indexterm>
                <primary>performance</primary>
              </indexterm>
                There is no bias. There is a determination to recommend the right tool for the task at hand.
                After all, it is better than putting users through performance problems, isn't it?
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

                <para>
                The example given for file and directory access control forces all files to be owned by one
                particular user. I do not like that. Is there any way I can see who created the file?
                </para>

        </question>
        <answer>

            <para><indexterm>
                <primary>SUID</primary>
              </indexterm>
                Sure. You do not have to set the SUID bit on the directory. Simply execute the following command
                to permit file ownership to be retained by the user who created it:
<screen>
&rootprompt; find /usr/data/finance -type d -exec chmod g+s {}\;
</screen>
                Note that this required no more than removing the <constant>u</constant> argument so that the
                SUID bit is not set for the owner.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

            <para><indexterm>
                <primary>Computer Management</primary>
              </indexterm>
                In the book, <quote>The Official Samba-3 HOWTO and Reference Guide</quote>, you recommended use
                of the Windows NT4 Server Manager (part of the <filename>SRVTOOLS.EXE</filename>) utility. Why
                have you mentioned only the use of the Windows 200x/XP MMC Computer Management utility?
                </para>

        </question>
        <answer>

            <para><indexterm>
                <primary>MMC</primary>
              </indexterm><indexterm>
                <primary>SRVTOOLS.EXE</primary>
              </indexterm>
                Either tool can be used with equal effect. There is no benefit of one over the other, except that
                the MMC utility is present on all Windows 200x/XP systems and does not require additional software
                to be downloaded and installed. Note that if you want to manage user and group accounts in your
                Samba-controlled domain, the only tool that permits that is the NT4 Domain User Manager, which
                is provided as part of the <filename>SRVTOOLS.EXE</filename> utility.
                </para>

        </answer>
        </qandaentry>

        <qandaentry>
        <question>

            <para><indexterm>
                <primary>valid users</primary>
              </indexterm><indexterm>
                <primary>Active Directory</primary>
              </indexterm><indexterm>
                <primary>Domain Member server</primary>
              </indexterm>
                I tried to set <parameter>valid users = @Engineers</parameter>, but it does not work. My Samba
                server is an Active Directory domain member server. Has this been fixed now?
                </para>

        </question>
        <answer>

                <para>
                The use of this parameter has always required the full specification of the domain account, for
                example, <parameter>valid users = @"MEGANET2\Domain Admins"</parameter>.
                </para>

        </answer>
        </qandaentry>

        </qandaset>

</sect1>

</chapter>