s3/libsmb: Fix typo in error message.
[Samba/gebeck_regimport.git] / howto4.txt
blob3ae225ddb872aead2eb4795c57a167e8d147c3a2
1 Samba4 developer howto
2 ======================
4 tridge@samba.org, December 2004
6 A more up to date version of this howto can be found in the wiki 
7 at http://wiki.samba.org/index.php/Samba4/HOWTO.
9 This is a very basic document on how to setup a simple Samba4
10 server. This is aimed at developers who are already familiar with
11 Samba3 and wish to participate in Samba4 development. This is not
12 aimed at production use of Samba4.
14 .. contents::
16 Step 1: download Samba4
17 -----------------------
19 If you have downloaded the Samba4 code via a tarball released from the
20 samba.org website, Step 1 has already been completed for you.  For testing
21 with the version released in the tarball, you may continue on to Step 2.  Note
22 that the references below to the top-level directory named "samba4" will
23 instead be based on the name of the tarball downloaded (e.g.
24 "samba-4.0.0alpha3" for the tarball samba-4.0.0alpha3.tar.gz).
26 There are 2 methods of doing this:
28   method 1:  "rsync -avz samba.org::ftp/unpacked/samba_4_0_test/ samba4"
30   method 2:  "git clone git://git.samba.org/samba.git samba4; cd samba4 && git checkout -b v4-0-test origin/v4-0-test; cd .."
32 both methods will create a directory called "samba4" in the current
33 directory. If you don't have rsync or git then install one of them. 
35 Since only released versions of Samba contain a pregenerated configure script, 
36 you will have to generate it by hand::
38  $ cd samba4/source
39  $ ./autogen.sh
41 Note that the above rsync command will give you a checked out git
42 repository. So if you also have git you can update it to the latest
43 version at some future date using::
45   $ cd samba4
46   $ git pull origin v4-0-test
48 Step 2: compile Samba4
49 ----------------------
51 Recommended optional development libraries:
52 - acl and xattr development libraries
53 - gnutls
54 - readline
56 Run this::
58   $ cd samba4/source
59   $ ./configure
60   $ make
62 Step 3: install Samba4
63 ----------------------
65 Run this as a user who have permission to write to the install
66 directory (defaults to /usr/local/samba). Use --prefix option to
67 configure above to change this.
71   # make install
74 Step 4: provision Samba4
75 ------------------------
77 The "provision" step sets up a basic user database. 
78 Must be run as a user with permission to write to the install directory.
82   # cd source
83   # ./setup/provision --realm=YOUR.REALM --domain=YOURDOM \
84   #  --adminpass=SOMEPASSWORD --server-role='domain controller'
86 'YOURDOM' is the NT4 style domain name. 'YOUR.REALM' is your kerberos
87 realm, which is typically your DNS domain name.
89 Step 5: Create a simple smb.conf
90 --------------------------------
92 The provisioning will create a very simple smb.conf with no shares by
93 default. You will need to update it to add at least one share. For
94 example::
96   [test]
97         path = /data/test
98         read only = no
101 Step 6: starting Samba4
102 -----------------------
104 The simplest is to just run "smbd", but as a developer you may find
105 the following more useful::
107    # smbd -i -M single
109 that means "start smbd without messages in stdout, and running a
110 single process. That mode of operation makes debugging smbd with gdb
111 particularly easy.
113 Note that now it is no longer necessary to have an instance of nmbd
114 from Samba 3 running.  If you are running any smbd or nmbd processes
115 they need to be stopped before starting smbd from Samba 4.
117 Make sure you put the bin and sbin directories from your new install
118 in your $PATH. Make sure you run the right version!
121 Step 7: testing Samba4
122 ----------------------
124 try this command::
126   $ smbclient //localhost/test -Uadministrator%SOMEPASSWORD
129 NOTE about filesystem support
130 -----------------------------
132 To use the advanced features of Samba4 you need a filesystem that
133 supports both the "user" and "system" xattr namespaces.
135 If you run Linux with a 2.6 kernel and ext3 this means you need to
136 include the option "user_xattr" in your /etc/fstab. For example::
138    /dev/hda3            /home                   ext3    user_xattr     1 1
140 You also need to compile your kernel with the XATTR and SECURITY
141 options for your filesystem. For ext3 that means you need::
143    CONFIG_EXT3_FS_XATTR=y
144    CONFIG_EXT3_FS_SECURITY=y
146 If you are running a Linux 2.6 kernel with CONFIG_IKCONFIG_PROC
147 defined you can check this with the following command::
149    $ zgrep CONFIG_EXT3_FS /proc/config.gz
151 If you don't have a filesystem with xattr support, then you can
152 simulate it by using the option::
154    posix:eadb = /usr/local/samba/eadb.tdb
156 that will place all extra file attributes (NT ACLs, DOS EAs, streams
157 etc), in that tdb. It is not efficient, and doesn't scale well, but at
158 least it gives you a choice when you don't have a modern filesystem.
160 Testing your filesystem
161 -----------------------
163 To test your filesystem support, install the 'attr' package and run
164 the following 4 commands as root::
166   # touch test.txt
167   # setfattr -n user.test -v test test.txt
168   # setfattr -n security.test -v test2 test.txt
169   # getfattr -d test.txt
170   # getfattr -n security.test -d test.txt
172 You should see output like this::
174   # file: test.txt
175   user.test="test"
176   
177   # file: test.txt
178   security.test="test2"
180 If you get any "Operation not supported" errors then it means your
181 kernel is not configured correctly, or your filesystem is not mounted
182 with the right options.
184 If you get any "Operation not permitted" errors then it probably means
185 you didn't try the test as root.
188         vim: ft=rest