trying to get HEAD building again. If you want the code

[Samba/gbeck.git] / docs / docbook / smbdotconf / security / security.xml

<samba:parameter name="security"
                 context="G"
                 basic="1" advanced="1" wizard="1" developer="1"
                 xmlns:samba="http://samba.org/common">
<listitem>
    <para>This option affects how clients respond to 
    Samba and is one of the most important settings in the <filename moreinfo="none">
    smb.conf</filename> file.</para>

    <para>The option sets the &quot;security mode bit&quot; in replies to 
    protocol negotiations with <citerefentry><refentrytitle>smbd</refentrytitle>
    <manvolnum>8</manvolnum></citerefentry> to turn share level security on or off. Clients decide 
    based on this bit whether (and how) to transfer user and password 
    information to the server.</para>


    <para>The default is <command moreinfo="none">security = user</command>, as this is
    the most common setting needed when talking to Windows 98 and 
    Windows NT.</para>

    <para>The alternatives are <command moreinfo="none">security = share</command>,
    <command moreinfo="none">security = server</command> or <command moreinfo="none">security = domain
    </command>.</para>

    <para>In versions of Samba prior to 2.0.0, the default was 
    <command moreinfo="none">security = share</command> mainly because that was
    the only option at one stage.</para>

    <para>There is a bug in WfWg that has relevance to this 
    setting. When in user or server level security a WfWg client 
    will totally ignore the password you type in the &quot;connect 
    drive&quot; dialog box. This makes it very difficult (if not impossible) 
    to connect to a Samba service as anyone except the user that 
    you are logged into WfWg as.</para>

    <para>If your PCs use usernames that are the same as their 
    usernames on the UNIX machine then you will want to use 
    <command moreinfo="none">security = user</command>. If you mostly use usernames 
    that don't exist on the UNIX box then use <command moreinfo="none">security = 
    share</command>.</para>

    <para>You should also use <command moreinfo="none">security = share</command> if you 
    want to mainly setup shares without a password (guest shares). This 
    is commonly used for a shared printer server. It is more difficult 
    to setup guest shares with <command moreinfo="none">security = user</command>, see 
    the <link linkend="MAPTOGUEST"><parameter moreinfo="none">map to guest</parameter>
    </link>parameter for details.</para>
                
    <para>It is possible to use <command moreinfo="none">smbd</command> in a <emphasis>
    hybrid mode</emphasis> where it is offers both user and share 
    level security under different <link linkend="NETBIOSALIASES">
    <parameter moreinfo="none">NetBIOS aliases</parameter></link>. </para>

    <para>The different settings will now be explained.</para>


    <para><anchor id="SECURITYEQUALSSHARE"/><emphasis>SECURITY = SHARE</emphasis></para> 
                
    <para>When clients connect to a share level security server they 
    need not log onto the server with a valid username and password before 
    attempting to connect to a shared resource (although modern clients 
    such as Windows 95/98 and Windows NT will send a logon request with 
    a username but no password when talking to a <command moreinfo="none">security = share
    </command> server). Instead, the clients send authentication information 
    (passwords) on a per-share basis, at the time they attempt to connect 
    to that share.</para>

    <para>Note that <command moreinfo="none">smbd</command> <emphasis>ALWAYS</emphasis> 
    uses a valid UNIX user to act on behalf of the client, even in
    <command moreinfo="none">security = share</command> level security.</para>

    <para>As clients are not required to send a username to the server
    in share level security, <command moreinfo="none">smbd</command> uses several
    techniques to determine the correct UNIX user to use on behalf
    of the client.</para>

    <para>A list of possible UNIX usernames to match with the given
    client password is constructed using the following methods :</para>

    <itemizedlist>
        <listitem>
            <para>If the <link linkend="GUESTONLY"><parameter moreinfo="none">guest 
            only</parameter></link> parameter is set, then all the other 
            stages are missed and only the <link linkend="GUESTACCOUNT">
            <parameter moreinfo="none">guest account</parameter></link> username is checked.
            </para>
        </listitem>

        <listitem>
            <para>Is a username is sent with the share connection 
            request, then this username (after mapping - see <link linkend="USERNAMEMAP">
            <parameter moreinfo="none">username map</parameter></link>), 
            is added as a potential username.
            </para>
        </listitem>

        <listitem>
            <para>If the client did a previous <emphasis>logon
            </emphasis> request (the SessionSetup SMB call) then the 
            username sent in this SMB will be added as a potential username.
            </para>
        </listitem>

        <listitem>
            <para>The name of the service the client requested is 
            added as a potential username.
            </para>
        </listitem>

        <listitem>
            <para>The NetBIOS name of the client is added to 
            the list as a potential username.
            </para>
        </listitem>

        <listitem>
            <para>Any users on the <link linkend="USER"><parameter moreinfo="none">
            user</parameter></link> list are added as potential usernames.
            </para>
        </listitem>
    </itemizedlist>

    <para>If the <parameter moreinfo="none">guest only</parameter> parameter is 
    not set, then this list is then tried with the supplied password. 
    The first user for whom the password matches will be used as the 
    UNIX user.</para>

    <para>If the <parameter moreinfo="none">guest only</parameter> parameter is 
    set, or no username can be determined then if the share is marked 
    as available to the <parameter moreinfo="none">guest account</parameter>, then this 
    guest user will be used, otherwise access is denied.</para>

    <para>Note that it can be <emphasis>very</emphasis> confusing 
    in share-level security as to which UNIX username will eventually
    be used in granting access.</para>

    <para>See also the section <link linkend="VALIDATIONSECT">
    NOTE ABOUT USERNAME/PASSWORD VALIDATION</link>.</para>

    <para><anchor id="SECURITYEQUALSUSER"/><emphasis>SECURITY = USER</emphasis></para>

    <para>This is the default security setting in Samba 3.0. 
    With user-level security a client must first &quot;log-on&quot; with a 
    valid username and password (which can be mapped using the <link linkend="USERNAMEMAP">
    <parameter moreinfo="none">username map</parameter></link> 
    parameter). Encrypted passwords (see the <link linkend="ENCRYPTPASSWORDS">
    <parameter moreinfo="none">encrypted passwords</parameter></link> parameter) can also
    be used in this security mode. Parameters such as <link linkend="USER">
    <parameter moreinfo="none">user</parameter></link> and <link linkend="GUESTONLY">
    <parameter moreinfo="none">guest only</parameter></link> if set     are then applied and 
    may change the UNIX user to use on this connection, but only after 
    the user has been successfully authenticated.</para>

    <para><emphasis>Note</emphasis> that the name of the resource being 
    requested is <emphasis>not</emphasis> sent to the server until after 
    the server has successfully authenticated the client. This is why 
    guest shares don't work in user level security without allowing 
    the server to automatically map unknown users into the <link linkend="GUESTACCOUNT">
    <parameter moreinfo="none">guest account</parameter></link>. 
    See the <link linkend="MAPTOGUEST"><parameter moreinfo="none">map to guest</parameter>
    </link> parameter for details on doing this.</para>

    <para>See also the section <link linkend="VALIDATIONSECT">
    NOTE ABOUT USERNAME/PASSWORD VALIDATION</link>.</para>

    <para><anchor id="SECURITYEQUALSDOMAIN"/><emphasis>SECURITY = DOMAIN</emphasis></para>

    <para>This mode will only work correctly if <citerefentry><refentrytitle>net</refentrytitle>
    <manvolnum>8</manvolnum></citerefentry> has been used to add this
    machine into a Windows NT Domain. It expects the <link linkend="ENCRYPTPASSWORDS">
    <parameter moreinfo="none">encrypted passwords</parameter>
    </link> parameter to be set to <constant>yes</constant>. In this 
    mode Samba will try to validate the username/password by passing
    it to a Windows NT Primary or Backup Domain Controller, in exactly 
    the same way that a Windows NT Server would do.</para>

    <para><emphasis>Note</emphasis> that a valid UNIX user must still 
    exist as well as the account on the Domain Controller to allow 
    Samba to have a valid UNIX account to map file access to.</para>

    <para><emphasis>Note</emphasis> that from the client's point 
    of view <command moreinfo="none">security = domain</command> is the same 
    as <command moreinfo="none">security = user</command>. It only 
    affects how the server deals with the authentication, 
    it does not in any way affect what the client sees.</para>

    <para><emphasis>Note</emphasis> that the name of the resource being 
    requested is <emphasis>not</emphasis> sent to the server until after 
    the server has successfully authenticated the client. This is why 
    guest shares don't work in user level security without allowing 
    the server to automatically map unknown users into the <link linkend="GUESTACCOUNT">
    <parameter moreinfo="none">guest account</parameter></link>. 
    See the <link linkend="MAPTOGUEST"><parameter moreinfo="none">map to guest</parameter>
    </link> parameter for details on doing this.</para>

    <para>See also the section <link linkend="VALIDATIONSECT">
    NOTE ABOUT USERNAME/PASSWORD VALIDATION</link>.</para>

    <para>See also the <link linkend="PASSWORDSERVER"><parameter moreinfo="none">password 
    server</parameter></link> parameter and the <link linkend="ENCRYPTPASSWORDS">
    <parameter moreinfo="none">encrypted passwords</parameter>
    </link> parameter.</para>

    <para><anchor id="SECURITYEQUALSSERVER"/><emphasis>SECURITY = SERVER</emphasis></para>

    <para>In this mode Samba will try to validate the username/password 
    by passing it to another SMB server, such as an NT box. If this 
    fails it will revert to <command moreinfo="none">security =
    user</command>. It expects the <link linkend="ENCRYPTPASSWORDS">
    <parameter moreinfo="none">encrypted passwords</parameter></link> parameter 
    to be set to <constant>yes</constant>, unless the remote server
    does not support them.  However note that if encrypted passwords have been 
    negotiated then Samba cannot revert back to checking the UNIX password file, 
    it must have a valid <filename moreinfo="none">smbpasswd</filename> file to check 
        users against. See the chapter about the User Database in the Samba HOWTO Collection for details on how to set this up.</para>

        <note><para>This mode of operation has
    significant pitfalls, due to the fact that is activly initiates a
    man-in-the-middle attack on the remote SMB server.  In particular,
    this mode of operation can cause significant resource consuption on
    the PDC, as it must maintain an active connection for the duration
    of the user's session.  Furthermore, if this connection is lost,
    there is no way to reestablish it, and futher authenticaions to the
    Samba server may fail.  (From a single client, till it disconnects).
        </para></note>

        <note><para>From the client's point of 
    view <command moreinfo="none">security = server</command> is the
    same as <command moreinfo="none">security = user</command>.  It
    only affects how the server deals  with the authentication, it does
        not in any way affect what the  client sees.</para></note>

    <para><emphasis>Note</emphasis> that the name of the resource being 
    requested is <emphasis>not</emphasis> sent to the server until after 
    the server has successfully authenticated the client. This is why 
    guest shares don't work in user level security without allowing 
    the server to automatically map unknown users into the <link linkend="GUESTACCOUNT">
    <parameter moreinfo="none">guest account</parameter></link>. 
    See the <link linkend="MAPTOGUEST"><parameter moreinfo="none">map to guest</parameter>
    </link> parameter for details on doing this.</para>

    <para>See also the section <link linkend="VALIDATIONSECT">
    NOTE ABOUT USERNAME/PASSWORD VALIDATION</link>.</para>

    <para>See also the <link linkend="PASSWORDSERVER"><parameter moreinfo="none">password 
    server</parameter></link> parameter and the <link linkend="ENCRYPTPASSWORDS">
    <parameter moreinfo="none">encrypted passwords</parameter></link> parameter.</para>

        <para><anchor id="SECURITYEQUALSADS"/><emphasis>SECURITY = ADS</emphasis></para>
        
        <para>In this mode, Samba will act as a domain member in an ADS realm. To operate 
                in this mode, the machine running Samba will need to have Kerberos installed 
                and configured and Samba will need to be joined to the ADS realm using the 
                net utility. </para>
        
        <para>Note that this mode does NOT make Samba operate as a Active Directory Domain 
                Controller. </para>
        
        <para>Read the chapter about Domain Membership in the HOWTO for details.</para>

        <para>See also the <link linkend="ADSSERVER"><parameter moreinfo="none">ads server
        </parameter></link> parameter, the <link linkend="REALM"><parameter moreinfo="none">realm
        </parameter></link> paramter and the <link linkend="ENCRYPTPASSWORDS">
    <parameter moreinfo="none">encrypted passwords</parameter></link> parameter.</para>
                
    <para>Default: <command moreinfo="none">security = USER</command></para>
    <para>Example: <command moreinfo="none">security = DOMAIN</command></para>

</listitem>
</samba:parameter>