2 Unix SMB/Netbios implementation.
4 SMB parameters and setup
5 Copyright (C) Andrew Tridgell 1992-2000
6 Copyright (C) John H Terpstra 1996-2000
7 Copyright (C) Luke Kenneth Casson Leighton 1996-2000
8 Copyright (C) Paul Ashton 1998-2000
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #define BUFFER_SIZE (0xFFFF)
29 #define SAFETY_MARGIN 1024
32 #define DGRAM_PORT 138
41 #define _BOOL /* So we don't typedef BOOL again in vfs.h */
44 /* limiting size of ipc replies */
45 #define REALLOC(ptr,size) Realloc(ptr,MAX((size),4*1024))
49 #ifndef DEF_CREATE_MASK
50 #define DEF_CREATE_MASK (0755)
53 /* string manipulation flags - see clistr.c and srvstr.c */
54 #define STR_TERMINATE 1
58 #define STR_UNICODE 16
61 /* how long to wait for secondary SMB packets (milli-seconds) */
62 #define SMB_SECONDARY_WAIT (60*1000)
67 /* this defines the error codes that receive_smb can put in smb_read_error */
68 #define READ_TIMEOUT 1
73 #define DIR_STRUCT_SIZE 43
75 /* these define all the command types recognised by the server - there
76 are lots of gaps so probably there are some rare commands that are not
79 #define pSETDIR '\377'
81 /* these define the attribute byte as seen by DOS */
82 #define aRONLY (1L<<0)
83 #define aHIDDEN (1L<<1)
84 #define aSYSTEM (1L<<2)
85 #define aVOLID (1L<<3)
98 #define DOS_OPEN_RDONLY 0
99 #define DOS_OPEN_WRONLY 1
100 #define DOS_OPEN_RDWR 2
101 #define DOS_OPEN_FCB 0xF
103 /* define shifts and masks for share and open modes. */
104 #define OPEN_MODE_MASK 0xF
105 #define SHARE_MODE_SHIFT 4
106 #define SHARE_MODE_MASK 0x7
107 #define GET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
108 #define SET_OPEN_MODE(x) ((x) & OPEN_MODE_MASK)
109 #define GET_DENY_MODE(x) (((x)>>SHARE_MODE_SHIFT) & SHARE_MODE_MASK)
110 #define SET_DENY_MODE(x) ((x)<<SHARE_MODE_SHIFT)
112 /* Sync on open file (not sure if used anymore... ?) */
113 #define FILE_SYNC_OPENMODE (1<<14)
114 #define GET_FILE_SYNC_OPENMODE(x) (((x) & FILE_SYNC_OPENMODE) ? True : False)
116 /* allow delete on open file mode (used by NT SMB's). */
117 #define ALLOW_SHARE_DELETE (1<<15)
118 #define GET_ALLOW_SHARE_DELETE(x) (((x) & ALLOW_SHARE_DELETE) ? True : False)
119 #define SET_ALLOW_SHARE_DELETE(x) ((x) ? ALLOW_SHARE_DELETE : 0)
121 /* delete on close flag (used by NT SMB's). */
122 #define DELETE_ON_CLOSE_FLAG (1<<16)
123 #define GET_DELETE_ON_CLOSE_FLAG(x) (((x) & DELETE_ON_CLOSE_FLAG) ? True : False)
124 #define SET_DELETE_ON_CLOSE_FLAG(x) ((x) ? DELETE_ON_CLOSE_FLAG : 0)
126 /* was delete access requested in NT open ? */
127 #define DELETE_ACCESS_REQUESTED (1<<17)
128 #define GET_DELETE_ACCESS_REQUESTED(x) (((x) & DELETE_ACCESS_REQUESTED) ? True : False)
129 #define SET_DELETE_ACCESS_REQUESTED(x) ((x) ? DELETE_ACCESS_REQUESTED : 0)
131 /* open disposition values */
132 #define FILE_EXISTS_FAIL 0
133 #define FILE_EXISTS_OPEN 1
134 #define FILE_EXISTS_TRUNCATE 2
136 /* mask for open disposition. */
137 #define FILE_OPEN_MASK 0x3
139 #define GET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
140 #define SET_FILE_OPEN_DISPOSITION(x) ((x) & FILE_OPEN_MASK)
142 /* The above can be OR'ed with... */
143 #define FILE_CREATE_IF_NOT_EXIST 0x10
144 #define FILE_FAIL_IF_NOT_EXIST 0
146 #define GET_FILE_CREATE_DISPOSITION(x) ((x) & (FILE_CREATE_IF_NOT_EXIST|FILE_FAIL_IF_NOT_EXIST))
149 #define STYPE_DISKTREE 0 /* Disk drive */
150 #define STYPE_PRINTQ 1 /* Spooler queue */
151 #define STYPE_DEVICE 2 /* Serial device */
152 #define STYPE_IPC 3 /* Interprocess communication (IPC) */
153 #define STYPE_HIDDEN 0x80000000 /* share is a hidden one (ends with $) */
155 /* SMB X/Open error codes for the ERRDOS error class */
156 #define ERRbadfunc 1 /* Invalid function (or system call) */
157 #define ERRbadfile 2 /* File not found (pathname error) */
158 #define ERRbadpath 3 /* Directory not found */
159 #define ERRnofids 4 /* Too many open files */
160 #define ERRnoaccess 5 /* Access denied */
161 #define ERRbadfid 6 /* Invalid fid */
162 #define ERRnomem 8 /* Out of memory */
163 #define ERRbadmem 9 /* Invalid memory block address */
164 #define ERRbadenv 10 /* Invalid environment */
165 #define ERRbadaccess 12 /* Invalid open mode */
166 #define ERRbaddata 13 /* Invalid data (only from ioctl call) */
167 #define ERRres 14 /* reserved */
168 #define ERRbaddrive 15 /* Invalid drive */
169 #define ERRremcd 16 /* Attempt to delete current directory */
170 #define ERRdiffdevice 17 /* rename/move across different filesystems */
171 #define ERRnofiles 18 /* no more files found in file search */
172 #define ERRbadshare 32 /* Share mode on file conflict with open mode */
173 #define ERRlock 33 /* Lock request conflicts with existing lock */
174 #define ERRunsup 50 /* Request unsupported, returned by Win 95, RJS 20Jun98 */
175 #define ERRnosuchshare 67 /* You specified an invalid share name */
176 #define ERRfilexists 80 /* File in operation already exists */
177 #define ERRcannotopen 110 /* Cannot open the file specified */
178 #define ERRunknownlevel 124
179 #define ERRrename 183
180 #define ERRbadpipe 230 /* Named pipe invalid */
181 #define ERRpipebusy 231 /* All instances of pipe are busy */
182 #define ERRpipeclosing 232 /* named pipe close in progress */
183 #define ERRnotconnected 233 /* No process on other end of named pipe */
184 #define ERRmoredata 234 /* More data to be returned */
185 #define ERRbaddirectory 267 /* Invalid directory name in a path. */
186 #define ERRunknownipc 2142
187 #define ERRbuftoosmall 2123
188 #define ERRnosuchprintjob 2151
190 #define ERROR_SUCCESS (0)
191 #define ERROR_INVALID_FUNCTION (1)
192 #define ERROR_ACCESS_DENIED (5)
193 #define ERROR_INVALID_HANDLE (6)
194 #define ERROR_NOT_ENOUGH_MEMORY (8)
195 #define ERROR_INVALID_PARAMETER (87)
196 #define ERROR_INSUFFICIENT_BUFFER (122)
197 #define ERROR_INVALID_NAME (123)
198 #define ERROR_INVALID_LEVEL (124)
199 #define ERROR_MORE_DATA (234)
200 #define ERROR_NO_MORE_ITEMS (259)
201 #define ERROR_EAS_DIDNT_FIT (275) /* Extended attributes didn't fit */
202 #define ERROR_EAS_NOT_SUPPORTED (282) /* Extended attributes not supported */
203 #define ERROR_NOTIFY_ENUM_DIR (1022) /* Buffer too small to return change notify. */
204 #define ERROR_UNKNOWN_PRINTER_DRIVER (1797)
205 #define ERROR_INVALID_PRINTER_NAME (1801)
206 #define ERROR_INVALID_DATATYPE (1804)
207 #define ERROR_INVALID_ENVIRONMENT (1805)
208 #define ERROR_PRINTER_DRIVER_IN_USE (3001)
210 /* here's a special one from observing NT */
211 #define ERRnoipc 66 /* don't support ipc */
213 /* Error codes for the ERRSRV class */
215 #define ERRerror 1 /* Non specific error code */
216 #define ERRbadpw 2 /* Bad password */
217 #define ERRbadtype 3 /* reserved */
218 #define ERRaccess 4 /* No permissions to do the requested operation */
219 #define ERRinvnid 5 /* tid invalid */
220 #define ERRinvnetname 6 /* Invalid servername */
221 #define ERRinvdevice 7 /* Invalid device */
222 #define ERRqfull 49 /* Print queue full */
223 #define ERRqtoobig 50 /* Queued item too big */
224 #define ERRinvpfid 52 /* Invalid print file in smb_fid */
225 #define ERRsmbcmd 64 /* Unrecognised command */
226 #define ERRsrverror 65 /* smb server internal error */
227 #define ERRfilespecs 67 /* fid and pathname invalid combination */
228 #define ERRbadlink 68 /* reserved */
229 #define ERRbadpermits 69 /* Access specified for a file is not valid */
230 #define ERRbadpid 70 /* reserved */
231 #define ERRsetattrmode 71 /* attribute mode invalid */
232 #define ERRpaused 81 /* Message server paused */
233 #define ERRmsgoff 82 /* Not receiving messages */
234 #define ERRnoroom 83 /* No room for message */
235 #define ERRrmuns 87 /* too many remote usernames */
236 #define ERRtimeout 88 /* operation timed out */
237 #define ERRnoresource 89 /* No resources currently available for request. */
238 #define ERRtoomanyuids 90 /* too many userids */
239 #define ERRbaduid 91 /* bad userid */
240 #define ERRuseMPX 250 /* temporarily unable to use raw mode, use MPX mode */
241 #define ERRuseSTD 251 /* temporarily unable to use raw mode, use standard mode */
242 #define ERRcontMPX 252 /* resume MPX mode */
243 #define ERRbadPW /* reserved */
244 #define ERRnosupport 0xFFFF
245 #define ERRunknownsmb 22 /* from NT 3.5 response */
248 /* Error codes for the ERRHRD class */
250 #define ERRnowrite 19 /* read only media */
251 #define ERRbadunit 20 /* Unknown device */
252 #define ERRnotready 21 /* Drive not ready */
253 #define ERRbadcmd 22 /* Unknown command */
254 #define ERRdata 23 /* Data (CRC) error */
255 #define ERRbadreq 24 /* Bad request structure length */
257 #define ERRbadmedia 26
258 #define ERRbadsector 27
259 #define ERRnopaper 28
260 #define ERRwrite 29 /* write fault */
261 #define ERRread 30 /* read fault */
262 #define ERRgeneral 31 /* General hardware failure */
263 #define ERRwrongdisk 34
264 #define ERRFCBunavail 35
265 #define ERRsharebufexc 36 /* share buffer exceeded */
266 #define ERRdiskfull 39
270 #define PSTRING_LEN 1024
271 #define FSTRING_LEN 256
273 typedef char pstring
[PSTRING_LEN
];
274 typedef char fstring
[FSTRING_LEN
];
281 * SMB UCS2 (16-bit unicode) internal type.
284 typedef uint16 smb_ucs2_t
;
286 /* ucs2 string types. */
287 typedef smb_ucs2_t wpstring
[PSTRING_LEN
];
288 typedef smb_ucs2_t wfstring
[FSTRING_LEN
];
290 /* pipe string names */
291 #define PIPE_LANMAN "\\PIPE\\LANMAN"
292 #define PIPE_SRVSVC "\\PIPE\\srvsvc"
293 #define PIPE_SAMR "\\PIPE\\samr"
294 #define PIPE_WINREG "\\PIPE\\winreg"
295 #define PIPE_WKSSVC "\\PIPE\\wkssvc"
296 #define PIPE_NETLOGON "\\PIPE\\NETLOGON"
297 #define PIPE_NTLSA "\\PIPE\\ntlsa"
298 #define PIPE_NTSVCS "\\PIPE\\ntsvcs"
299 #define PIPE_LSASS "\\PIPE\\lsass"
300 #define PIPE_LSARPC "\\PIPE\\lsarpc"
301 #define PIPE_SPOOLSS "\\PIPE\\spoolss"
302 #define PIPE_NETDFS "\\PIPE\\netdfs"
304 /* 64 bit time (100usec) since ????? - cifs6.txt, section 3.5, page 30 */
305 typedef struct nttime_info
312 /* Allowable account control bits */
313 #define ACB_DISABLED 0x0001 /* 1 = User account disabled */
314 #define ACB_HOMDIRREQ 0x0002 /* 1 = Home directory required */
315 #define ACB_PWNOTREQ 0x0004 /* 1 = User password not required */
316 #define ACB_TEMPDUP 0x0008 /* 1 = Temporary duplicate account */
317 #define ACB_NORMAL 0x0010 /* 1 = Normal user account */
318 #define ACB_MNS 0x0020 /* 1 = MNS logon user account */
319 #define ACB_DOMTRUST 0x0040 /* 1 = Interdomain trust account */
320 #define ACB_WSTRUST 0x0080 /* 1 = Workstation trust account */
321 #define ACB_SVRTRUST 0x0100 /* 1 = Server trust account */
322 #define ACB_PWNOEXP 0x0200 /* 1 = User password does not expire */
323 #define ACB_AUTOLOCK 0x0400 /* 1 = Account auto locked */
325 #define MAX_HOURS_LEN 32
329 uint32 user_rid
; /* Primary User ID */
330 char *smb_name
; /* username string */
331 char *full_name
; /* user's full name string */
353 #define MAXSUBAUTHS 15 /* max sub authorities in a SID */
357 /* DOM_SID - security id */
358 typedef struct sid_info
360 uint8 sid_rev_num
; /* SID revision number */
361 uint8 num_auths
; /* number of sub-authorities */
362 uint8 id_auth
[6]; /* Identifier Authority */
364 * Note that the values in these uint32's are in *native* byteorder,
365 * not neccessarily little-endian...... JRA.
367 uint32 sub_auths
[MAXSUBAUTHS
]; /* pointer to sub-authorities. */
374 * The complete list of SIDS belonging to this user.
375 * Created when a vuid is registered.
376 * The definition of the user_sids array is as follows :
378 * token->user_sids[0] = primary user SID.
379 * token->user_sids[1] = primary group SID.
380 * token->user_sids[2-num_sids] = supplementary group SIDS.
383 #ifndef _NT_USER_TOKEN
384 typedef struct _nt_user_token
{
388 #define _NT_USER_TOKEN
391 /*** query a local group, get a list of these: shows who is in that group ***/
393 /* local group member info */
394 typedef struct local_grp_member_info
396 DOM_SID sid
; /* matches with name */
397 uint8 sid_use
; /* usr=1 grp=2 dom=3 alias=4 wkng=5 del=6 inv=7 unk=8 */
398 fstring name
; /* matches with sid: must be of the form "DOMAIN\account" */
402 /* enumerate these to get list of local groups */
404 /* local group info */
405 typedef struct local_grp_info
412 /*** enumerate these to get list of domain groups ***/
414 /* domain group member info */
415 typedef struct domain_grp_info
419 uint32 rid
; /* group rid */
420 uint8 attr
; /* attributes forced to be set to 0x7: SE_GROUP_xxx */
424 /*** query a domain group, get a list of these: shows who is in that group ***/
426 /* domain group info */
427 typedef struct domain_grp_member_info
430 uint8 attr
; /* attributes forced to be set to 0x7: SE_GROUP_xxx */
434 /* 32 bit time (sec) since 01jan1970 - cifs6.txt, section 3.5, page 30 */
435 typedef struct time_info
440 /* Structure used when SMBwritebmpx is active */
443 size_t wr_total_written
; /* So we know when to discard this */
446 int32 wr_error
; /* Cached errors */
447 BOOL wr_mode
; /* write through mode) */
448 BOOL wr_discard
; /* discard all further data */
451 typedef struct write_cache
460 typedef struct files_struct
462 struct files_struct
*next
, *prev
;
464 struct connection_struct
*conn
;
469 BOOL delete_on_close
;
474 write_bmpx_struct
*wbmpx_ptr
;
476 struct timeval open_time
;
478 time_t pending_modtime
;
480 int sent_oplock_break
;
487 BOOL directory_delete_on_close
;
493 * Structure used to keep directory state information around.
494 * Used in NT change-notify code.
505 uid_t list
[UID_CACHE_SIZE
];
512 } name_compare_entry
;
514 /* Include VFS stuff */
518 typedef struct connection_struct
520 struct connection_struct
*next
, *prev
;
521 unsigned cnum
; /* an index passed over the wire */
524 struct uid_cache uid_cache
;
534 struct vfs_ops vfs_ops
; /* Filesystem operations */
535 /* Handle on dlopen() call */
538 char *user
; /* name of user who *opened* this connection */
539 uid_t uid
; /* uid of user who *opened* this connection */
540 gid_t gid
; /* gid of user who *opened* this connection */
541 char client_address
[18]; /* String version of client IP address. */
543 uint16 vuid
; /* vuid of user who *opened* this connection, or UID_FIELD_INVALID */
545 /* following groups stuff added by ih */
547 /* This groups info is valid for the user that *opened* the connection */
550 NT_USER_TOKEN
*nt_user_token
;
555 name_compare_entry
*hide_list
; /* Per-share list of files to return as hidden. */
556 name_compare_entry
*veto_list
; /* Per-share list of files to veto (never show). */
557 name_compare_entry
*veto_oplock_list
; /* Per-share list of files to refuse oplocks on. */
563 connection_struct
*conn
;
569 NT_USER_TOKEN
*nt_user_token
;
572 /* Defines for the sent_oplock_break field above. */
573 #define NO_BREAK_SENT 0
574 #define EXCLUSIVE_BREAK_SENT 1
575 #define LEVEL_II_BREAK_SENT 2
578 fstring smb_name
; /* user name from the client */
579 fstring unix_name
; /* unix user name of a validated user */
580 fstring full_name
; /* to store full name (such as "Joe Bloggs") from gecos field of password file */
581 fstring domain
; /* domain that the client specified */
584 /* Extra fields above "LPQ_PRINTING" are used to map extra NT status codes. */
586 enum {LPQ_QUEUED
=0,LPQ_PAUSED
,LPQ_SPOOLING
,LPQ_PRINTING
,LPQ_ERROR
,LPQ_DELETING
,
587 LPQ_OFFLINE
,LPQ_PAPEROUT
,LPQ_PRINTED
,LPQ_DELETED
,LPQ_BLOCKED
,LPQ_USER_INTERVENTION
};
589 typedef struct _print_queue_struct
598 } print_queue_struct
;
600 enum {LPSTAT_OK
, LPSTAT_STOPPED
, LPSTAT_ERROR
};
607 } print_status_struct
;
609 /* used for server information: client, nameserv and ipc */
610 struct server_info_struct
615 fstring domain
; /* used ONLY in ipc.c NOT namework.c */
616 BOOL server_added
; /* used ONLY in ipc.c NOT namework.c */
620 /* used for network interfaces */
623 struct interface
*next
, *prev
;
625 struct in_addr bcast
;
626 struct in_addr nmask
;
629 /* struct returned by get_share_modes */
640 #define SHAREMODE_FN_CAST() \
641 void (*)(share_mode_entry *, char*)
643 #define SHAREMODE_FN(fn) \
644 void (*fn)(share_mode_entry *, char*)
646 typedef struct sam_passwd
648 time_t logon_time
; /* logon time */
649 time_t logoff_time
; /* logoff time */
650 time_t kickoff_time
; /* kickoff time */
651 time_t pass_last_set_time
; /* password last set time */
652 time_t pass_can_change_time
; /* password can change time */
653 time_t pass_must_change_time
; /* password must change time */
655 pstring username
; /* UNIX username string */
656 pstring domain
; /* Windows Domain name */
657 pstring nt_username
; /* Windows username string */
658 pstring full_name
; /* user's full name string */
659 pstring home_dir
; /* home directory string */
660 pstring dir_drive
; /* home directory drive string */
661 pstring logon_script
; /* logon script string */
662 pstring profile_path
; /* profile path string */
663 pstring acct_desc
; /* user description string */
664 pstring workstations
; /* login from workstations string */
665 pstring unknown_str
; /* don't know what this is, yet. */
666 pstring munged_dial
; /* munged path name and dial-back tel number */
668 uid_t uid
; /* this is actually the unix uid_t */
669 gid_t gid
; /* this is actually the unix gid_t */
670 uint32 user_rid
; /* Primary User ID */
671 uint32 group_rid
; /* Primary Group ID */
673 unsigned char *lm_pw
; /* Null if no password */
674 unsigned char *nt_pw
; /* Null if no password */
676 uint16 acct_ctrl
; /* account info (ACB_xxxx bit-mask) */
677 uint32 unknown_3
; /* 0x00ff ffff */
679 uint16 logon_divs
; /* 168 - number of hours in a week */
680 uint32 hours_len
; /* normally 21 bytes */
681 uint8 hours
[MAX_HOURS_LEN
];
683 uint32 unknown_5
; /* 0x0002 0000 */
684 uint32 unknown_6
; /* 0x0000 04ec */
689 * Flags for local user manipulation.
692 #define LOCAL_ADD_USER 0x1
693 #define LOCAL_DELETE_USER 0x2
694 #define LOCAL_DISABLE_USER 0x4
695 #define LOCAL_ENABLE_USER 0x8
696 #define LOCAL_TRUST_ACCOUNT 0x10
697 #define LOCAL_SET_NO_PASSWORD 0x20
699 /* key and data in the connections database - used in smbstatus and smbd */
700 struct connections_key
{
706 struct connections_data
{
714 char machine
[FSTRING_LEN
];
719 /* key and data records in the tdb locking database */
725 struct locking_data
{
726 int num_share_mode_entries
;
727 /* the following two entries are implicit
728 share_mode_entry modes[num_share_mode_entries];
734 /* the following are used by loadparm for option lists */
737 P_BOOL
,P_BOOLREV
,P_CHAR
,P_INTEGER
,P_OCTAL
,
738 P_STRING
,P_USTRING
,P_GSTRING
,P_UGSTRING
,P_ENUM
,P_SEP
743 P_LOCAL
,P_GLOBAL
,P_SEPARATOR
,P_NONE
746 /* passed to br lock code */
747 enum brl_type
{READ_LOCK
, WRITE_LOCK
};
754 #define BRLOCK_FN_CAST() \
755 void (*)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
756 enum brl_type lock_type, \
757 br_off start, br_off size)
758 #define BRLOCK_FN(fn) \
759 void (*fn)(SMB_DEV_T dev, SMB_INO_T ino, int pid, \
760 enum brl_type lock_type, \
761 br_off start, br_off size)
768 BOOL (*special
)(char *, char **);
769 struct enum_list
*enum_list
;
784 #define FLAG_BASIC 0x01 /* fundamental options */
785 #define FLAG_SHARE 0x02 /* file sharing options */
786 #define FLAG_PRINT 0x04 /* printing options */
787 #define FLAG_GLOBAL 0x08 /* local options that should be globally settable in SWAT */
788 #define FLAG_DEPRECATED 0x10 /* options that should no longer be used */
789 #define FLAG_HIDE 0x20 /* options that should be hidden in SWAT */
790 #define FLAG_DOS_STRING 0x40 /* convert from UNIX to DOS codepage when reading this string. */
792 #ifndef LOCKING_VERSION
793 #define LOCKING_VERSION 4
794 #endif /* LOCKING_VERSION */
797 /* the basic packet size, assuming no words or bytes */
800 /* offsets into message for common items */
833 /* flag defines. CIFS spec 3.1.1 */
834 #define FLAG_SUPPORT_LOCKREAD 0x01
835 #define FLAG_CLIENT_BUF_AVAIL 0x02
836 #define FLAG_RESERVED 0x04
837 #define FLAG_CASELESS_PATHNAMES 0x08
838 #define FLAG_CANONICAL_PATHNAMES 0x10
839 #define FLAG_REQUEST_OPLOCK 0x20
840 #define FLAG_REQUEST_BATCH_OPLOCK 0x40
841 #define FLAG_REPLY 0x80
844 #define SMBmkdir 0x00 /* create directory */
845 #define SMBrmdir 0x01 /* delete directory */
846 #define SMBopen 0x02 /* open file */
847 #define SMBcreate 0x03 /* create file */
848 #define SMBclose 0x04 /* close file */
849 #define SMBflush 0x05 /* flush file */
850 #define SMBunlink 0x06 /* delete file */
851 #define SMBmv 0x07 /* rename file */
852 #define SMBgetatr 0x08 /* get file attributes */
853 #define SMBsetatr 0x09 /* set file attributes */
854 #define SMBread 0x0A /* read from file */
855 #define SMBwrite 0x0B /* write to file */
856 #define SMBlock 0x0C /* lock byte range */
857 #define SMBunlock 0x0D /* unlock byte range */
858 #define SMBctemp 0x0E /* create temporary file */
859 #define SMBmknew 0x0F /* make new file */
860 #define SMBchkpth 0x10 /* check directory path */
861 #define SMBexit 0x11 /* process exit */
862 #define SMBlseek 0x12 /* seek */
863 #define SMBtcon 0x70 /* tree connect */
864 #define SMBtconX 0x75 /* tree connect and X*/
865 #define SMBtdis 0x71 /* tree disconnect */
866 #define SMBnegprot 0x72 /* negotiate protocol */
867 #define SMBdskattr 0x80 /* get disk attributes */
868 #define SMBsearch 0x81 /* search directory */
869 #define SMBsplopen 0xC0 /* open print spool file */
870 #define SMBsplwr 0xC1 /* write to print spool file */
871 #define SMBsplclose 0xC2 /* close print spool file */
872 #define SMBsplretq 0xC3 /* return print queue */
873 #define SMBsends 0xD0 /* send single block message */
874 #define SMBsendb 0xD1 /* send broadcast message */
875 #define SMBfwdname 0xD2 /* forward user name */
876 #define SMBcancelf 0xD3 /* cancel forward */
877 #define SMBgetmac 0xD4 /* get machine name */
878 #define SMBsendstrt 0xD5 /* send start of multi-block message */
879 #define SMBsendend 0xD6 /* send end of multi-block message */
880 #define SMBsendtxt 0xD7 /* send text of multi-block message */
883 #define SMBlockread 0x13 /* Lock a range and read */
884 #define SMBwriteunlock 0x14 /* Unlock a range then write */
885 #define SMBreadbraw 0x1a /* read a block of data with no smb header */
886 #define SMBwritebraw 0x1d /* write a block of data with no smb header */
887 #define SMBwritec 0x20 /* secondary write request */
888 #define SMBwriteclose 0x2c /* write a file then close it */
890 /* dos extended protocol */
891 #define SMBreadBraw 0x1A /* read block raw */
892 #define SMBreadBmpx 0x1B /* read block multiplexed */
893 #define SMBreadBs 0x1C /* read block (secondary response) */
894 #define SMBwriteBraw 0x1D /* write block raw */
895 #define SMBwriteBmpx 0x1E /* write block multiplexed */
896 #define SMBwriteBs 0x1F /* write block (secondary request) */
897 #define SMBwriteC 0x20 /* write complete response */
898 #define SMBsetattrE 0x22 /* set file attributes expanded */
899 #define SMBgetattrE 0x23 /* get file attributes expanded */
900 #define SMBlockingX 0x24 /* lock/unlock byte ranges and X */
901 #define SMBtrans 0x25 /* transaction - name, bytes in/out */
902 #define SMBtranss 0x26 /* transaction (secondary request/response) */
903 #define SMBioctl 0x27 /* IOCTL */
904 #define SMBioctls 0x28 /* IOCTL (secondary request/response) */
905 #define SMBcopy 0x29 /* copy */
906 #define SMBmove 0x2A /* move */
907 #define SMBecho 0x2B /* echo */
908 #define SMBopenX 0x2D /* open and X */
909 #define SMBreadX 0x2E /* read and X */
910 #define SMBwriteX 0x2F /* write and X */
911 #define SMBsesssetupX 0x73 /* Session Set Up & X (including User Logon) */
912 #define SMBffirst 0x82 /* find first */
913 #define SMBfunique 0x83 /* find unique */
914 #define SMBfclose 0x84 /* find close */
915 #define SMBinvalid 0xFE /* invalid command */
917 /* Extended 2.0 protocol */
918 #define SMBtrans2 0x32 /* TRANS2 protocol set */
919 #define SMBtranss2 0x33 /* TRANS2 protocol set, secondary command */
920 #define SMBfindclose 0x34 /* Terminate a TRANSACT2_FINDFIRST */
921 #define SMBfindnclose 0x35 /* Terminate a TRANSACT2_FINDNOTIFYFIRST */
922 #define SMBulogoffX 0x74 /* user logoff */
924 /* NT SMB extensions. */
925 #define SMBnttrans 0xA0 /* NT transact */
926 #define SMBnttranss 0xA1 /* NT transact secondary */
927 #define SMBntcreateX 0xA2 /* NT create and X */
928 #define SMBntcancel 0xA4 /* NT cancel */
930 /* These are the TRANS2 sub commands */
931 #define TRANSACT2_OPEN 0
932 #define TRANSACT2_FINDFIRST 1
933 #define TRANSACT2_FINDNEXT 2
934 #define TRANSACT2_QFSINFO 3
935 #define TRANSACT2_SETFSINFO 4
936 #define TRANSACT2_QPATHINFO 5
937 #define TRANSACT2_SETPATHINFO 6
938 #define TRANSACT2_QFILEINFO 7
939 #define TRANSACT2_SETFILEINFO 8
940 #define TRANSACT2_FSCTL 9
941 #define TRANSACT2_IOCTL 0xA
942 #define TRANSACT2_FINDNOTIFYFIRST 0xB
943 #define TRANSACT2_FINDNOTIFYNEXT 0xC
944 #define TRANSACT2_MKDIR 0xD
945 #define TRANSACT2_SESSION_SETUP 0xE
946 #define TRANSACT2_GET_DFS_REFERRAL 0x10
947 #define TRANSACT2_REPORT_DFS_INCONSISTANCY 0x11
949 /* These are the NT transact sub commands. */
950 #define NT_TRANSACT_CREATE 1
951 #define NT_TRANSACT_IOCTL 2
952 #define NT_TRANSACT_SET_SECURITY_DESC 3
953 #define NT_TRANSACT_NOTIFY_CHANGE 4
954 #define NT_TRANSACT_RENAME 5
955 #define NT_TRANSACT_QUERY_SECURITY_DESC 6
957 /* Relevant IOCTL codes */
958 #define IOCTL_QUERY_JOB_INFO 0x530060
960 /* these are the trans2 sub fields for primary requests */
961 #define smb_tpscnt smb_vwv0
962 #define smb_tdscnt smb_vwv1
963 #define smb_mprcnt smb_vwv2
964 #define smb_mdrcnt smb_vwv3
965 #define smb_msrcnt smb_vwv4
966 #define smb_flags smb_vwv5
967 #define smb_timeout smb_vwv6
968 #define smb_pscnt smb_vwv9
969 #define smb_psoff smb_vwv10
970 #define smb_dscnt smb_vwv11
971 #define smb_dsoff smb_vwv12
972 #define smb_suwcnt smb_vwv13
973 #define smb_setup smb_vwv14
974 #define smb_setup0 smb_setup
975 #define smb_setup1 (smb_setup+2)
976 #define smb_setup2 (smb_setup+4)
978 /* these are for the secondary requests */
979 #define smb_spscnt smb_vwv2
980 #define smb_spsoff smb_vwv3
981 #define smb_spsdisp smb_vwv4
982 #define smb_sdscnt smb_vwv5
983 #define smb_sdsoff smb_vwv6
984 #define smb_sdsdisp smb_vwv7
985 #define smb_sfid smb_vwv8
987 /* and these for responses */
988 #define smb_tprcnt smb_vwv0
989 #define smb_tdrcnt smb_vwv1
990 #define smb_prcnt smb_vwv3
991 #define smb_proff smb_vwv4
992 #define smb_prdisp smb_vwv5
993 #define smb_drcnt smb_vwv6
994 #define smb_droff smb_vwv7
995 #define smb_drdisp smb_vwv8
997 /* these are for the NT trans primary request. */
998 #define smb_nt_MaxSetupCount smb_vwv0
999 #define smb_nt_Flags (smb_vwv0 + 1)
1000 #define smb_nt_TotalParameterCount (smb_vwv0 + 3)
1001 #define smb_nt_TotalDataCount (smb_vwv0 + 7)
1002 #define smb_nt_MaxParameterCount (smb_vwv0 + 11)
1003 #define smb_nt_MaxDataCount (smb_vwv0 + 15)
1004 #define smb_nt_ParameterCount (smb_vwv0 + 19)
1005 #define smb_nt_ParameterOffset (smb_vwv0 + 23)
1006 #define smb_nt_DataCount (smb_vwv0 + 27)
1007 #define smb_nt_DataOffset (smb_vwv0 + 31)
1008 #define smb_nt_SetupCount (smb_vwv0 + 35)
1009 #define smb_nt_Function (smb_vwv0 + 36)
1010 #define smb_nt_SetupStart (smb_vwv0 + 38)
1012 /* these are for the NT trans secondary request. */
1013 #define smb_nts_TotalParameterCount (smb_vwv0 + 3)
1014 #define smb_nts_TotalDataCount (smb_vwv0 + 7)
1015 #define smb_nts_ParameterCount (smb_vwv0 + 11)
1016 #define smb_nts_ParameterOffset (smb_vwv0 + 15)
1017 #define smb_nts_ParameterDisplacement (smb_vwv0 + 19)
1018 #define smb_nts_DataCount (smb_vwv0 + 23)
1019 #define smb_nts_DataOffset (smb_vwv0 + 27)
1020 #define smb_nts_DataDisplacement (smb_vwv0 + 31)
1022 /* these are for the NT trans reply. */
1023 #define smb_ntr_TotalParameterCount (smb_vwv0 + 3)
1024 #define smb_ntr_TotalDataCount (smb_vwv0 + 7)
1025 #define smb_ntr_ParameterCount (smb_vwv0 + 11)
1026 #define smb_ntr_ParameterOffset (smb_vwv0 + 15)
1027 #define smb_ntr_ParameterDisplacement (smb_vwv0 + 19)
1028 #define smb_ntr_DataCount (smb_vwv0 + 23)
1029 #define smb_ntr_DataOffset (smb_vwv0 + 27)
1030 #define smb_ntr_DataDisplacement (smb_vwv0 + 31)
1032 /* these are for the NT create_and_X */
1033 #define smb_ntcreate_NameLength (smb_vwv0 + 5)
1034 #define smb_ntcreate_Flags (smb_vwv0 + 7)
1035 #define smb_ntcreate_RootDirectoryFid (smb_vwv0 + 11)
1036 #define smb_ntcreate_DesiredAccess (smb_vwv0 + 15)
1037 #define smb_ntcreate_AllocationSize (smb_vwv0 + 19)
1038 #define smb_ntcreate_FileAttributes (smb_vwv0 + 27)
1039 #define smb_ntcreate_ShareAccess (smb_vwv0 + 31)
1040 #define smb_ntcreate_CreateDisposition (smb_vwv0 + 35)
1041 #define smb_ntcreate_CreateOptions (smb_vwv0 + 39)
1042 #define smb_ntcreate_ImpersonationLevel (smb_vwv0 + 43)
1043 #define smb_ntcreate_SecurityFlags (smb_vwv0 + 47)
1045 /* this is used on a TConX. I'm not sure the name is very helpful though */
1046 #define SMB_SUPPORT_SEARCH_BITS 0x0001
1047 #define SMB_SHARE_IN_DFS 0x0002
1049 /* Named pipe write mode flags. Used in writeX calls. */
1050 #define PIPE_RAW_MODE 0x4
1051 #define PIPE_START_MESSAGE 0x8
1053 /* these are the constants used in the above call. */
1055 /* File Specific access rights. */
1056 #define FILE_READ_DATA 0x001
1057 #define FILE_WRITE_DATA 0x002
1058 #define FILE_APPEND_DATA 0x004
1059 #define FILE_READ_EA 0x008
1060 #define FILE_WRITE_EA 0x010
1061 #define FILE_EXECUTE 0x020
1062 #define FILE_DELETE_CHILD 0x040
1063 #define FILE_READ_ATTRIBUTES 0x080
1064 #define FILE_WRITE_ATTRIBUTES 0x100
1066 #define FILE_ALL_ACCESS 0x1FF
1068 /* the desired access to use when opening a pipe */
1069 #define DESIRED_ACCESS_PIPE 0x2019f
1071 /* Generic access masks & rights. */
1072 #define SPECIFIC_RIGHTS_MASK 0x00FFFFL
1073 #define STANDARD_RIGHTS_MASK 0xFF0000L
1074 #define DELETE_ACCESS (1L<<16)
1075 #define READ_CONTROL_ACCESS (1L<<17)
1076 #define WRITE_DAC_ACCESS (1L<<18)
1077 #define WRITE_OWNER_ACCESS (1L<<19)
1078 #define SYNCHRONIZE_ACCESS (1L<<20)
1080 /* Combinations of standard masks. */
1081 #define STANDARD_RIGHTS_ALL_ACCESS (DELETE_ACCESS|READ_CONTROL_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS|SYNCHRONIZE_ACCESS)
1082 #define STANDARD_RIGHTS_EXECUTE_ACCESS (READ_CONTROL_ACCESS)
1083 #define STANDARD_RIGHTS_READ_ACCESS (READ_CONTROL_ACCESS)
1084 #define STANDARD_RIGHTS_REQUIRED_ACCESS (DELETE_ACCESS|READ_CONTROL_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS)
1085 #define STANDARD_RIGHTS_WRITE_ACCESS (READ_CONTROL_ACCESS)
1087 #define SYSTEM_SECURITY_ACCESS (1L<<24)
1088 #define MAXIMUM_ALLOWED_ACCESS (1L<<25)
1089 #define GENERIC_ALL_ACCESS (1<<28)
1090 #define GENERIC_EXECUTE_ACCESS (1<<29)
1091 #define GENERIC_WRITE_ACCESS (1<<30)
1092 #define GENERIC_READ_ACCESS (((unsigned)1)<<31)
1094 /* Mapping of generic access rights for files to specific rights. */
1096 #define FILE_GENERIC_ALL (STANDARD_RIGHTS_REQUIRED_ACCESS| SYNCHRONIZE_ACCESS|FILE_ALL_ACCESS)
1098 #define FILE_GENERIC_READ (STANDARD_RIGHTS_READ_ACCESS|FILE_READ_DATA|FILE_READ_ATTRIBUTES|\
1099 FILE_READ_EA|SYNCHRONIZE_ACCESS)
1101 #define FILE_GENERIC_WRITE (STANDARD_RIGHTS_WRITE_ACCESS|FILE_WRITE_DATA|FILE_WRITE_ATTRIBUTES|\
1102 FILE_WRITE_EA|FILE_APPEND_DATA|SYNCHRONIZE_ACCESS)
1104 #define FILE_GENERIC_EXECUTE (STANDARD_RIGHTS_EXECUTE_ACCESS|FILE_READ_ATTRIBUTES|\
1105 FILE_EXECUTE|SYNCHRONIZE_ACCESS)
1107 /* Mapping of access rights to UNIX perms. */
1108 #define UNIX_ACCESS_RWX (UNIX_ACCESS_R|UNIX_ACCESS_W|UNIX_ACCESS_X)
1109 #define UNIX_ACCESS_R (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1110 FILE_READ_ATTRIBUTES|FILE_READ_EA|FILE_READ_DATA)
1111 #define UNIX_ACCESS_W (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1112 FILE_WRITE_ATTRIBUTES|FILE_WRITE_EA|\
1113 FILE_APPEND_DATA|FILE_WRITE_DATA)
1114 #define UNIX_ACCESS_X (READ_CONTROL_ACCESS|SYNCHRONIZE_ACCESS|\
1115 FILE_EXECUTE|FILE_READ_ATTRIBUTES)
1117 #define UNIX_ACCESS_NONE (WRITE_OWNER_ACCESS)
1120 #define REQUEST_OPLOCK 2
1121 #define REQUEST_BATCH_OPLOCK 4
1122 #define OPEN_DIRECTORY 8
1124 /* ShareAccess field. */
1125 #define FILE_SHARE_NONE 0 /* Cannot be used in bitmask. */
1126 #define FILE_SHARE_READ 1
1127 #define FILE_SHARE_WRITE 2
1128 #define FILE_SHARE_DELETE 4
1130 /* FileAttributesField */
1131 #define FILE_ATTRIBUTE_READONLY aRONLY
1132 #define FILE_ATTRIBUTE_HIDDEN aHIDDEN
1133 #define FILE_ATTRIBUTE_SYSTEM aSYSTEM
1134 #define FILE_ATTRIBUTE_DIRECTORY aDIR
1135 #define FILE_ATTRIBUTE_ARCHIVE aARCH
1136 #define FILE_ATTRIBUTE_NORMAL 0x80L
1137 #define FILE_ATTRIBUTE_TEMPORARY 0x100L
1138 #define FILE_ATTRIBUTE_COMPRESSED 0x800L
1139 #define SAMBA_ATTRIBUTES_MASK 0x7F
1141 /* Flags - combined with attributes. */
1142 #define FILE_FLAG_WRITE_THROUGH 0x80000000L
1143 #define FILE_FLAG_NO_BUFFERING 0x20000000L
1144 #define FILE_FLAG_RANDOM_ACCESS 0x10000000L
1145 #define FILE_FLAG_SEQUENTIAL_SCAN 0x08000000L
1146 #define FILE_FLAG_DELETE_ON_CLOSE 0x04000000L
1147 #define FILE_FLAG_BACKUP_SEMANTICS 0x02000000L
1148 #define FILE_FLAG_POSIX_SEMANTICS 0x01000000L
1150 /* CreateDisposition field. */
1151 #define FILE_SUPERSEDE 0
1153 #define FILE_CREATE 2
1154 #define FILE_OPEN_IF 3
1155 #define FILE_OVERWRITE 4
1156 #define FILE_OVERWRITE_IF 5
1158 /* CreateOptions field. */
1159 #define FILE_DIRECTORY_FILE 0x0001
1160 #define FILE_WRITE_THROUGH 0x0002
1161 #define FILE_SEQUENTIAL_ONLY 0x0004
1162 #define FILE_NON_DIRECTORY_FILE 0x0040
1163 #define FILE_NO_EA_KNOWLEDGE 0x0200
1164 #define FILE_EIGHT_DOT_THREE_ONLY 0x0400
1165 #define FILE_RANDOM_ACCESS 0x0800
1166 #define FILE_DELETE_ON_CLOSE 0x1000
1168 /* Responses when opening a file. */
1169 #define FILE_WAS_OPENED 1
1170 #define FILE_WAS_CREATED 2
1171 #define FILE_WAS_OVERWRITTEN 3
1173 /* File type flags */
1174 #define FILE_TYPE_DISK 0
1175 #define FILE_TYPE_BYTE_MODE_PIPE 1
1176 #define FILE_TYPE_MESSAGE_MODE_PIPE 2
1177 #define FILE_TYPE_PRINTER 3
1178 #define FILE_TYPE_COMM_DEVICE 4
1179 #define FILE_TYPE_UNKNOWN 0xFFFF
1181 /* Flag for NT transact rename call. */
1182 #define RENAME_REPLACE_IF_EXISTS 1
1184 /* Filesystem Attributes. */
1185 #define FILE_CASE_SENSITIVE_SEARCH 0x01
1186 #define FILE_CASE_PRESERVED_NAMES 0x02
1187 #define FILE_UNICODE_ON_DISK 0x04
1188 /* According to cifs9f, this is 4, not 8 */
1189 /* Acconding to testing, this actually sets the security attribute! */
1190 #define FILE_PERSISTENT_ACLS 0x08
1191 /* These entries added from cifs9f --tsb */
1192 #define FILE_FILE_COMPRESSION 0x08
1193 #define FILE_VOLUME_QUOTAS 0x10
1194 #define FILE_DEVICE_IS_MOUNTED 0x20
1195 #define FILE_VOLUME_IS_COMPRESSED 0x8000
1197 /* ChangeNotify flags. */
1198 #define FILE_NOTIFY_CHANGE_FILE 0x001
1199 #define FILE_NOTIFY_CHANGE_DIR_NAME 0x002
1200 #define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x004
1201 #define FILE_NOTIFY_CHANGE_SIZE 0x008
1202 #define FILE_NOTIFY_CHANGE_LAST_WRITE 0x010
1203 #define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x020
1204 #define FILE_NOTIFY_CHANGE_CREATION 0x040
1205 #define FILE_NOTIFY_CHANGE_EA 0x080
1206 #define FILE_NOTIFY_CHANGE_SECURITY 0x100
1207 #define FILE_NOTIFY_CHANGE_FILE_NAME 0x200
1209 /* where to find the base of the SMB packet proper */
1210 #define smb_base(buf) (((char *)(buf))+4)
1212 /* we don't allow server strings to be longer than 48 characters as
1213 otherwise NT will not honour the announce packets */
1214 #define MAX_SERVER_STRING_LENGTH 48
1217 #define SMB_SUCCESS 0 /* The request was successful. */
1218 #define ERRDOS 0x01 /* Error is from the core DOS operating system set. */
1219 #define ERRSRV 0x02 /* Error is generated by the server network file manager.*/
1220 #define ERRHRD 0x03 /* Error is an hardware error. */
1221 #define ERRCMD 0xFF /* Command was not in the "SMB" format. */
1224 void dfs_unlogin(void);
1225 extern int dcelogin_atmost_once
;
1229 char *strdup(char *s
);
1233 #define SIGNAL_CAST (RETSIGTYPE (*)(int))
1240 /* these are used in NetServerEnum to choose what to receive */
1241 #define SV_TYPE_WORKSTATION 0x00000001
1242 #define SV_TYPE_SERVER 0x00000002
1243 #define SV_TYPE_SQLSERVER 0x00000004
1244 #define SV_TYPE_DOMAIN_CTRL 0x00000008
1245 #define SV_TYPE_DOMAIN_BAKCTRL 0x00000010
1246 #define SV_TYPE_TIME_SOURCE 0x00000020
1247 #define SV_TYPE_AFP 0x00000040
1248 #define SV_TYPE_NOVELL 0x00000080
1249 #define SV_TYPE_DOMAIN_MEMBER 0x00000100
1250 #define SV_TYPE_PRINTQ_SERVER 0x00000200
1251 #define SV_TYPE_DIALIN_SERVER 0x00000400
1252 #define SV_TYPE_SERVER_UNIX 0x00000800
1253 #define SV_TYPE_NT 0x00001000
1254 #define SV_TYPE_WFW 0x00002000
1255 #define SV_TYPE_SERVER_MFPN 0x00004000
1256 #define SV_TYPE_SERVER_NT 0x00008000
1257 #define SV_TYPE_POTENTIAL_BROWSER 0x00010000
1258 #define SV_TYPE_BACKUP_BROWSER 0x00020000
1259 #define SV_TYPE_MASTER_BROWSER 0x00040000
1260 #define SV_TYPE_DOMAIN_MASTER 0x00080000
1261 #define SV_TYPE_SERVER_OSF 0x00100000
1262 #define SV_TYPE_SERVER_VMS 0x00200000
1263 #define SV_TYPE_WIN95_PLUS 0x00400000
1264 #define SV_TYPE_DFS_SERVER 0x00800000
1265 #define SV_TYPE_ALTERNATE_XPORT 0x20000000
1266 #define SV_TYPE_LOCAL_LIST_ONLY 0x40000000
1267 #define SV_TYPE_DOMAIN_ENUM 0x80000000
1268 #define SV_TYPE_ALL 0xFFFFFFFF
1270 /* This was set by JHT in liaison with Jeremy Allison early 1997
1272 * Version 4.0 - never made public
1273 * Version 4.10 - New to 1.9.16p2, lost in space 1.9.16p3 to 1.9.16p9
1274 * - Reappeared in 1.9.16p11 with fixed smbd services
1275 * Version 4.20 - To indicate that nmbd and browsing now works better
1276 * Version 4.50 - Set at release of samba-2.2.0 by JHT
1278 * Note: In the presence of NT4.X do not set above 4.9
1279 * Setting this above 4.9 can have undesired side-effects.
1280 * This may change again in Samba-3.0 after further testing. JHT
1283 #define DEFAULT_MAJOR_VERSION 0x04
1284 #define DEFAULT_MINOR_VERSION 0x05
1286 /* Browser Election Values */
1287 #define BROWSER_ELECTION_VERSION 0x010f
1288 #define BROWSER_CONSTANT 0xaa55
1290 /* NT Flags2 bits - cifs6.txt section 3.1.2 */
1292 #define FLAGS2_LONG_PATH_COMPONENTS 0x0001
1293 #define FLAGS2_EXTENDED_ATTRIBUTES 0x0002
1294 #define FLAGS2_DFS_PATHNAMES 0x1000
1295 #define FLAGS2_READ_PERMIT_NO_EXECUTE 0x2000
1296 #define FLAGS2_32_BIT_ERROR_CODES 0x4000
1297 #define FLAGS2_UNICODE_STRINGS 0x8000
1299 #define FLAGS2_WIN2K_SIGNATURE 0xC852 /* Hack alert ! For now... JRA. */
1301 /* Capabilities. see ftp.microsoft.com/developr/drg/cifs/cifs/cifs4.txt */
1303 #define CAP_RAW_MODE 0x0001
1304 #define CAP_MPX_MODE 0x0002
1305 #define CAP_UNICODE 0x0004
1306 #define CAP_LARGE_FILES 0x0008
1307 #define CAP_NT_SMBS 0x0010
1308 #define CAP_RPC_REMOTE_APIS 0x0020
1309 #define CAP_STATUS32 0x0040
1310 #define CAP_LEVEL_II_OPLOCKS 0x0080
1311 #define CAP_LOCK_AND_READ 0x0100
1312 #define CAP_NT_FIND 0x0200
1313 #define CAP_DFS 0x1000
1314 #define CAP_LARGE_READX 0x4000
1315 #define CAP_EXTENDED_SECURITY 0x80000000
1317 /* protocol types. It assumes that higher protocols include lower protocols
1319 enum protocol_types
{PROTOCOL_NONE
,PROTOCOL_CORE
,PROTOCOL_COREPLUS
,PROTOCOL_LANMAN1
,PROTOCOL_LANMAN2
,PROTOCOL_NT1
};
1321 /* security levels */
1322 enum security_types
{SEC_SHARE
,SEC_USER
,SEC_SERVER
,SEC_DOMAIN
};
1333 /* printing types */
1334 enum printing_types
{PRINT_BSD
,PRINT_SYSV
,PRINT_AIX
,PRINT_HPUX
,
1335 PRINT_QNX
,PRINT_PLP
,PRINT_LPRNG
,PRINT_SOFTQ
,
1336 PRINT_CUPS
,PRINT_LPRNT
,PRINT_LPROS2
1338 ,PRINT_TEST
,PRINT_VLP
1339 #endif /* DEVELOPER */
1342 /* Remote architectures we know about. */
1343 enum remote_arch_types
{RA_UNKNOWN
, RA_WFWG
, RA_OS2
, RA_WIN95
, RA_WINNT
, RA_WIN2K
, RA_SAMBA
};
1346 enum case_handling
{CASE_LOWER
,CASE_UPPER
};
1349 /* SSL version options */
1350 enum ssl_version_enum
{SMB_SSL_V2
,SMB_SSL_V3
,SMB_SSL_V23
,SMB_SSL_TLS1
};
1351 #endif /* WITH_SSL */
1354 * Global value meaing that the smb_uid field should be
1355 * ingored (in share level security and protocol level == CORE)
1358 #define UID_FIELD_INVALID 0
1359 #define VUID_OFFSET 100 /* Amount to bias returned vuid numbers */
1361 /* Defines needed for multi-codepage support. */
1362 #define MSDOS_LATIN_1_CODEPAGE 850
1363 #define KANJI_CODEPAGE 932
1364 #define HANGUL_CODEPAGE 949
1365 #define BIG5_CODEPAGE 950
1366 #define SIMPLIFIED_CHINESE_CODEPAGE 936
1370 * Default client code page - Japanese
1372 #define DEFAULT_CLIENT_CODE_PAGE KANJI_CODEPAGE
1375 * Default client code page - 850 - Western European
1377 #define DEFAULT_CLIENT_CODE_PAGE MSDOS_LATIN_1_CODEPAGE
1380 /* Global val set if multibyte codepage. */
1381 extern int global_is_multibyte_codepage
;
1383 #define get_character_len(x) (global_is_multibyte_codepage ? skip_multibyte_char((x)) : 0)
1386 * Size of buffer to use when moving files across filesystems.
1388 #define COPYBUF_SIZE (8*1024)
1391 * Integers used to override error codes.
1393 extern int unix_ERR_class
;
1394 extern int unix_ERR_code
;
1397 * Used in chaining code.
1399 extern int chain_size
;
1402 * Map the Core and Extended Oplock requesst bits down
1403 * to common bits (EXCLUSIVE_OPLOCK & BATCH_OPLOCK).
1409 #define CORE_OPLOCK_REQUEST(inbuf) \
1410 ((CVAL(inbuf,smb_flg)&(FLAG_REQUEST_OPLOCK|FLAG_REQUEST_BATCH_OPLOCK))>>5)
1413 * Extended protocol.
1415 #define EXTENDED_OPLOCK_REQUEST(inbuf) ((SVAL(inbuf,smb_vwv2)&((1<<1)|(1<<2)))>>1)
1418 #define LOCKING_ANDX_SHARED_LOCK 0x1
1419 #define LOCKING_ANDX_OPLOCK_RELEASE 0x2
1420 #define LOCKING_ANDX_CHANGE_LOCKTYPE 0x4
1421 #define LOCKING_ANDX_CANCEL_LOCK 0x8
1422 #define LOCKING_ANDX_LARGE_FILES 0x10
1425 #define OPLOCKLEVEL_NONE 0
1426 #define OPLOCKLEVEL_II 1
1429 * Bits we test with.
1433 #define EXCLUSIVE_OPLOCK 1
1434 #define BATCH_OPLOCK 2
1435 #define LEVEL_II_OPLOCK 4
1437 #define EXCLUSIVE_OPLOCK_TYPE(lck) ((lck) & (EXCLUSIVE_OPLOCK|BATCH_OPLOCK))
1438 #define BATCH_OPLOCK_TYPE(lck) ((lck) & BATCH_OPLOCK)
1439 #define LEVEL_II_OPLOCK_TYPE(lck) ((lck) & LEVEL_II_OPLOCK)
1441 #define CORE_OPLOCK_GRANTED (1<<5)
1442 #define EXTENDED_OPLOCK_GRANTED (1<<15)
1445 * Return values for oplock types.
1448 #define NO_OPLOCK_RETURN 0
1449 #define EXCLUSIVE_OPLOCK_RETURN 1
1450 #define BATCH_OPLOCK_RETURN 2
1451 #define LEVEL_II_OPLOCK_RETURN 3
1454 * Loopback command offsets.
1457 #define OPBRK_CMD_LEN_OFFSET 0
1458 #define OPBRK_CMD_PORT_OFFSET 4
1459 #define OPBRK_CMD_HEADER_LEN 6
1461 #define OPBRK_MESSAGE_CMD_OFFSET 0
1464 * Oplock break command code to send over the udp socket.
1465 * The same message is sent for both exlusive and level II breaks.
1467 * The form of this is :
1469 * 0 2 6 10 14 14+devsize 14+devsize+inodesize
1470 * +----+--------+--------+--------+-------+--------+
1471 * | cmd| pid | sec | usec | dev | inode |
1472 * +----+--------+--------+--------+-------+--------+
1475 #define OPLOCK_BREAK_CMD 0x1
1476 #define OPLOCK_BREAK_PID_OFFSET 2
1477 #define OPLOCK_BREAK_SEC_OFFSET (OPLOCK_BREAK_PID_OFFSET + sizeof(pid_t))
1478 #define OPLOCK_BREAK_USEC_OFFSET (OPLOCK_BREAK_SEC_OFFSET + sizeof(time_t))
1479 #define OPLOCK_BREAK_DEV_OFFSET (OPLOCK_BREAK_USEC_OFFSET + sizeof(long))
1480 #define OPLOCK_BREAK_INODE_OFFSET (OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
1481 #define OPLOCK_BREAK_MSG_LEN (OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
1483 #define KERNEL_OPLOCK_BREAK_CMD 0x2
1484 #define LEVEL_II_OPLOCK_BREAK_CMD 0x3
1487 * Capabilities abstracted for different systems.
1490 #define KERNEL_OPLOCK_CAPABILITY 0x1
1493 * Oplock break command code sent via the kernel interface (if it exists).
1497 * 0 2 2+devsize 2+devsize+inodesize
1498 * +----+--------+--------+
1499 * | cmd| dev | inode |
1500 * +----+--------+--------+
1502 #define KERNEL_OPLOCK_BREAK_DEV_OFFSET 2
1503 #define KERNEL_OPLOCK_BREAK_INODE_OFFSET (KERNEL_OPLOCK_BREAK_DEV_OFFSET + sizeof(SMB_DEV_T))
1504 #define KERNEL_OPLOCK_BREAK_MSG_LEN (KERNEL_OPLOCK_BREAK_INODE_OFFSET + sizeof(SMB_INO_T))
1507 /* if a kernel does support oplocks then a structure of the following
1508 typee is used to describe how to interact with the kernel */
1509 struct kernel_oplocks
{
1510 BOOL (*receive_message
)(fd_set
*fds
, char *buffer
, int buffer_len
);
1511 BOOL (*set_oplock
)(files_struct
*fsp
, int oplock_type
);
1512 void (*release_oplock
)(files_struct
*fsp
);
1513 BOOL (*parse_message
)(char *msg_start
, int msg_len
, SMB_INO_T
*inode
, SMB_DEV_T
*dev
);
1514 BOOL (*msg_waiting
)(fd_set
*fds
);
1515 int notification_fd
;
1519 #define CMD_REPLY 0x8000
1521 /* this structure defines the functions for doing change notify in
1522 various implementations */
1523 struct cnotify_fns
{
1524 void * (*register_notify
)(connection_struct
*conn
, char *path
, uint32 flags
);
1525 BOOL (*check_notify
)(connection_struct
*conn
, uint16 vuid
, char *path
, uint32 flags
, void *data
, time_t t
);
1526 void (*remove_notify
)(void *data
);
1532 #include "smb_macros.h"
1534 /* A netbios name structure. */
1538 unsigned int name_type
;
1542 /* A netbios node status array element. */
1543 struct node_status
{
1546 unsigned char flags
;
1551 #define AGENT_CMD_CON 0
1552 #define AGENT_CMD_CON_ANON 2
1553 #define AGENT_CMD_CON_REUSE 1
1563 uchar smb_lm_pwd
[16];
1564 uchar smb_nt_pwd
[16];
1566 uchar smb_lm_owf
[24];
1567 uchar smb_nt_owf
[128];
1570 uchar lm_cli_chal
[8];
1571 uchar nt_cli_chal
[128];
1572 size_t nt_cli_chal_len
;
1578 * Network Computing Architechture Context Name Named Pipe
1579 * See MSDN docs for more information
1584 struct cli_state
*smb
;
1589 #include "rpc_creds.h"
1590 #include "rpc_misc.h"
1591 #include "rpc_secdes.h"
1592 #include "nt_printing.h"
1594 typedef struct user_struct
1596 struct user_struct
*next
, *prev
;
1597 uint16 vuid
; /* Tag for this entry. */
1598 uid_t uid
; /* uid of a validated user */
1599 gid_t gid
; /* gid of a validated user */
1601 userdom_struct user
;
1604 /* following groups stuff added by ih */
1605 /* This groups info is needed for when we become_user() for this uid */
1609 NT_USER_TOKEN
*nt_user_token
;
1611 int session_id
; /* used by utmp and pam session code */
1614 #include "ntdomain.h"
1617 #include "rpcclient.h"
1620 * Size of new password account encoding string. DO NOT CHANGE.
1623 #define NEW_PW_FORMAT_SPACE_PADDED_LEN 14
1626 Do you want session setups at user level security with a invalid
1627 password to be rejected or allowed in as guest? WinNT rejects them
1628 but it can be a pain as it means "net view" needs to use a password
1630 You have 3 choices in the setting of map_to_guest:
1632 "NEVER_MAP_TO_GUEST" means session setups with an invalid password
1633 are rejected. This is the default.
1635 "MAP_TO_GUEST_ON_BAD_USER" means session setups with an invalid password
1636 are rejected, unless the username does not exist, in which case it
1637 is treated as a guest login
1639 "MAP_TO_GUEST_ON_BAD_PASSWORD" means session setups with an invalid password
1640 are treated as a guest login
1642 Note that map_to_guest only has an effect in user or server
1646 #define NEVER_MAP_TO_GUEST 0
1647 #define MAP_TO_GUEST_ON_BAD_USER 1
1648 #define MAP_TO_GUEST_ON_BAD_PASSWORD 2
1650 #include "nsswitch/winbindd_nss.h"
1651 #include "smb_acls.h"
1653 /* Used by winbindd_glue functions */
1656 struct cli_state
*cli
;
1658 TALLOC_CTX
*mem_ctx
;